The target/ppc/STATUS file has seen its last real update 10 years
ago - so the information in there is not up to date anymore. Since
nobody seems to care about this file, let's simply remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
target/ppc/STATUS | 550 ------------------------------------------------------
1 file changed, 550 deletions(-)
delete mode 100644 target/ppc/STATUS
diff --git a/target/ppc/STATUS b/target/ppc/STATUS
deleted file mode 100644
index a4d48a7..0000000
--- a/target/ppc/STATUS
+++ /dev/null
@@ -1,550 +0,0 @@
-PowerPC emulation status.
-The goal of this file is to provide a reference status to avoid regressions.
-
-===============================================================================
-PowerPC core emulation status
-
-INSN: instruction set.
- OK => all instructions are emulated
- KO => some insns are missing or some should be removed
- ? => unchecked
-SPR: special purpose registers set
- OK => all SPR registered (but some may be fake)
- KO => some SPR are missing or should be removed
- ? => unchecked
-MSR: MSR bits definitions
- OK => all MSR bits properly defined
- KO => MSR definition is incorrect
- ? => unchecked
-IRQ: input signals definitions (mostly interrupts)
- OK => input signals are properly defined
- KO => input signals are not implemented (system emulation does not work)
- ? => input signals definitions may be incorrect
-MMU: MMU model implementation
- OK => MMU model is implemented and Linux is able to boot
- KO => MMU model not implemented or bugged
- ? => MMU model not tested
-EXCP: exceptions model implementation
- OK => exception model is implemented and Linux is able to boot
- KO => exception model not implemented or known to be buggy
- ? => exception model may be incorrect or is untested
-
-Embedded PowerPC cores
-***
-PowerPC 401:
-INSN OK
-SPR OK 401A1
-MSR OK
-IRQ KO partially implemented
-MMU OK
-EXCP ?
-
-PowerPC 401x2:
-INSN OK
-SPR OK 401B2 401C2 401D2 401E2 401F2
-MSR OK
-IRQ KO partially implemented
-MMU OK
-EXCP ?
-
-PowerPC IOP480:
-INSN OK
-SPR OK IOP480
-MSR OK
-IRQ KO partially implemented
-MMU OK
-EXCP ?
-
-To be checked: 401G2 401B3 Cobra
-
-***
-PowerPC 403:
-INSN OK
-SPR OK 403GA 403GB
-MMU OK
-MSR OK
-IRQ KO not implemented
-EXCP ?
-
-PowerPC 403GCX:
-INSN OK
-SPR OK 403GCX
-MMU OK
-MSR OK
-IRQ KO not implemented
-EXCP ?
-
-To be checked: 403GC
-
-***
-PowerPC 405:
-Checked: 405CRa 405CRb 405CRc 405EP 405GPa 405GPb 405GPc 405GPd 405GPe 405GPR
- Npe405H Npe405H2 Npe405L
-INSN OK
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP OK
-Remarks: Linux 2.4 boots (at least 1 proprietary firmware).
- uboot seems to freeze at boot time.
-To be checked: 405D2 405D4 405EZ 405LP Npe4GS3 STB03 STB04 STB25
- x2vp4 x2vp7 x2vp20 x2vp50
-
-XXX: find what is IBM e407b4
-
-***
-PowerPC 440:
-Checked: 440EPa 440EPb 440GXa 440GXb 440GXc 440GXf 440SP 440SP2
-INSN OK
-SPR OK
-MSR OK
-IRQ KO not implemented
-MMU ?
-EXCP ?
-
-PowerPC 440GP:
-Checked: 440GPb 440GPc
-INSN OK
-SPR OK
-MSR OK
-IRQ KO not implemented
-MMU ?
-EXCP ?
-
-PowerPC 440x4:
-Checked: 440A4 440B4 440G4 440H4
-INSN OK
-SPR OK
-MSR OK
-IRQ KO not implemented
-MMU ?
-EXCP ?
-
-PowerPC 440x5:
-Checked: 440A5 440F5 440G5 440H6 440GRa
-INSN OK
-SPR OK
-MSR OK
-IRQ KO not implemented
-MMU ?
-EXCP ?
-
-To be checked: 440EPx 440GRx 440SPE
-
-***
-PowerPC 460: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-PowerPC 460F: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-***
-PowerPC e200: (not implemented)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-***
-PowerPC e300: (not implemented)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-***
-PowerPC e500: (not implemented)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-***
-PowerPC e600: (not implemented)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-***
-32 bits PowerPC
-PowerPC 601: (601 601v2)
-INSN OK
-SPR OK is HID15 only on 601v2 ?
-MSR OK
-IRQ KO not implemented
-MMU ?
-EXCP ?
-Remarks: some instructions should have a specific behavior (not implemented)
-
-PowerPC 602: 602
-INSN OK
-SPR OK
-MSR OK
-IRQ OK
-MMU ?
-EXCP ? at least timer and external interrupt are OK
-Remarks: Linux 2.4 crashes when entering user-mode.
- Linux 2.6.22 boots on this CPU but does not recognize it.
-
-PowerPC 603: (603)
-INSN OK
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP OK
-Remarks: Linux 2.4 boots and properly recognizes the CPU
- Linux 2.6.22 idem.
-
-PowerPC 603e: (603e11)
-INSN OK
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP OK
-Remarks: Linux 2.4 boots and properly recognizes the CPU
- Linux 2.6.22 idem.
-
-PowerPC G2:
-INSN OK
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP OK
-Remarks: Linux 2.4 boots, recognizes the CPU as a 82xx.
- Linux 2.6.22 idem.
-
-PowerPC G2le:
-INSN OK
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP OK
-Remarks: Linux 2.4 does not boots. Same symptoms as 602.
- Linux 2.6.22 boots and properly recognizes the CPU.
-
-PowerPC 604:
-INSN OK
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP OK
-Remarks: Linux 2.4 boots and properly recognizes the CPU.
- Linux 2.6.22 idem.
-
-PowerPC 7x0:
-INSN OK
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP OK
-Remarks: Linux 2.4 boots and properly recognizes the CPU.
- Linux 2.6.22 idem.
-
-PowerPC 750fx:
-INSN OK
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP OK
-Remarks: Linux 2.4 boots but does not properly recognizes the CPU.
- Linux 2.6.22 boots and properly recognizes the CPU.
-
-PowerPC 7x5:
-INSN ?
-SPR ?
-MSR ?
-IRQ OK
-MMU ?
-EXCP OK
-Remarks: Linux 2.4 does not boot.
- Linux 2.6.22 idem.
-
-PowerPC 7400:
-INSN KO Altivec missing
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP ? Altivec, ...
-Remarks: Linux 2.4 boots and properly recognize the CPU.
- Linux 2.6.22 idem.
-
-PowerPC 7410:
-INSN KO Altivec missing
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP ? Altivec, ...
-Remarks: Linux 2.4 boots and properly recognize the CPU.
- Linux 2.6.22 idem.
- Note that UM says tlbld & tlbli are implemented but this may be a mistake
- as TLB loads are managed by the hardware and the CPU does not implement the
- needed registers.
-
-PowerPC 7441:
-INSN KO Altivec missing
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP ? Altivec, ...
-Remarks: Linux does not have the code to handle TLB miss on this CPU
- Linux 2.6.22 idem.
-
-PowerPC 7450/7451:
-INSN KO Altivec missing
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP ? Altivec, ...
-Remarks: Linux does not have the code to handle TLB miss on this CPU
- Linux 2.6.22 idem.
-
-PowerPC 7445/7447:
-INSN KO Altivec missing
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP ? Altivec, ...
-Remarks: Linux does not have the code to handle TLB miss on this CPU
- Linux 2.6.22 idem.
-
-PowerPC 7455/7457:
-INSN KO Altivec missing
-SPR OK
-MSR OK
-IRQ OK
-MMU OK
-EXCP ? Altivec, ...
-Remarks: Linux does not have the code to handle TLB miss on this CPU
- Linux 2.6.22 idem.
-
-64 bits PowerPC
-PowerPC 620: (disabled)
-INSN KO
-SPR KO
-MSR ?
-IRQ KO
-MMU KO
-EXCP KO
-Remarks: not much documentation for this implementation...
-
-PowerPC 970:
-INSN KO Altivec missing and more
-SPR KO
-MSR ?
-IRQ OK
-MMU OK
-EXCP KO partially implemented
-Remarks: Should be able to boot but there is no hw platform currently emulated.
-
-PowerPC 970FX:
-INSN KO Altivec missing and more
-SPR KO
-MSR ?
-IRQ OK
-MMU OK
-EXCP KO partially implemented
-Remarks: Should be able to boot but there is no hw platform currently emulated.
-
-PowerPC Cell:
-INSN KO Altivec missing and more
-SPR KO
-MSR ?
-IRQ ?
-MMU ?
-EXCP ? partially implemented
-Remarks: As the core is mostly a 970, should be able to boot.
- SPE are not implemented.
-
-PowerPC 630: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-PowerPC 631: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-POWER4: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-POWER4+: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-POWER5: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-POWER5+: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-POWER6: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-RS64: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-RS64-II: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-RS64-III: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-RS64-IV: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-Original POWER
-POWER: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-POWER2: (disabled: lack of detailed specifications)
-INSN KO
-SPR KO
-MSR KO
-IRQ KO
-MMU KO
-EXCP KO
-
-===============================================================================
-PowerPC microcontrollers emulation status
-
-Implemementation should be sufficient to boot Linux:
-(there seem to be problems with uboot freezing at some point)
-- PowerPC 405CR
-- PowerPC 405EP
-
-TODO:
-- PowerPC 401 microcontrollers emulation
-- PowerPC 403 microcontrollers emulation
-- more PowerPC 405 microcontrollers emulation
-- Fixes / more features for implemented PowerPC 405 microcontrollers emulation
-- PowerPC 440 microcontrollers emulation
-- e200 microcontrollers emulation
-- e300 microcontrollers emulation
-- e500 microcontrollers emulation
-- e600 microcontrollers emulation
-
-===============================================================================
-PowerPC based platforms emulation status
-
-* PREP platform (RS/6000 7043...) - TO BE CHECKED (broken)
-- Gentoo Linux live CDROM 1.4
-- Debian Linux 3.0
-- Mandrake Linux 9
-
-* heathrow PowerMac platform (beige PowerMac) - TO BE CHECKED (broken)
-- Gentoo Linux live CDROM 1.4
-- Debian Linux 3.0
-- Mandrake Linux 9
-
-* mac99 platform (white and blue PowerMac, ...)
-- Gentoo Linux live CDROM 1.4 - boots, compiles linux kernel
-- Debian Linux woody - boots from CDROM and HDD
-- Mandrake Linux 9 - boots from CDROM, freezes during install
-- Knoppix 2003-07-13_4 boots from CDROM, pb with X configuration
- distribution bug: X runs with a properly hand-coded configuration.
-- rock Linux 2.0 runs from CDROM
-
-* Linux 2.6 support seems deadly broken (used to boot...).
-
-* PowerPC 405EP reference boards:
-- can boot Linux 2.4 & 2.6.
- Need to provide a flash image ready to boot for reproductible tests.
-
-TODO:
-- URGENT: fix PreP and heathrow platforms
-- PowerPC 64 reference platform
-- MCA based RS/6000 emulation
-- CHRP emulation (not PowerMac)
-- PPAR emulation
-- ePPAR emulation
-- misc PowerPC reference boards emulation
-
-===============================================================================
--
1.8.3.1
On Fri, Sep 01, 2017 at 09:38:12AM +0200, Thomas Huth wrote: > The target/ppc/STATUS file has seen its last real update 10 years > ago - so the information in there is not up to date anymore. Since > nobody seems to care about this file, let's simply remove it. > > Signed-off-by: Thomas Huth <thuth@redhat.com> Applied to ppc-for-2.11. > --- > target/ppc/STATUS | 550 ------------------------------------------------------ > 1 file changed, 550 deletions(-) > delete mode 100644 target/ppc/STATUS > > diff --git a/target/ppc/STATUS b/target/ppc/STATUS > deleted file mode 100644 > index a4d48a7..0000000 > --- a/target/ppc/STATUS > +++ /dev/null > @@ -1,550 +0,0 @@ > -PowerPC emulation status. > -The goal of this file is to provide a reference status to avoid regressions. > - > -=============================================================================== > -PowerPC core emulation status > - > -INSN: instruction set. > - OK => all instructions are emulated > - KO => some insns are missing or some should be removed > - ? => unchecked > -SPR: special purpose registers set > - OK => all SPR registered (but some may be fake) > - KO => some SPR are missing or should be removed > - ? => unchecked > -MSR: MSR bits definitions > - OK => all MSR bits properly defined > - KO => MSR definition is incorrect > - ? => unchecked > -IRQ: input signals definitions (mostly interrupts) > - OK => input signals are properly defined > - KO => input signals are not implemented (system emulation does not work) > - ? => input signals definitions may be incorrect > -MMU: MMU model implementation > - OK => MMU model is implemented and Linux is able to boot > - KO => MMU model not implemented or bugged > - ? => MMU model not tested > -EXCP: exceptions model implementation > - OK => exception model is implemented and Linux is able to boot > - KO => exception model not implemented or known to be buggy > - ? => exception model may be incorrect or is untested > - > -Embedded PowerPC cores > -*** > -PowerPC 401: > -INSN OK > -SPR OK 401A1 > -MSR OK > -IRQ KO partially implemented > -MMU OK > -EXCP ? > - > -PowerPC 401x2: > -INSN OK > -SPR OK 401B2 401C2 401D2 401E2 401F2 > -MSR OK > -IRQ KO partially implemented > -MMU OK > -EXCP ? > - > -PowerPC IOP480: > -INSN OK > -SPR OK IOP480 > -MSR OK > -IRQ KO partially implemented > -MMU OK > -EXCP ? > - > -To be checked: 401G2 401B3 Cobra > - > -*** > -PowerPC 403: > -INSN OK > -SPR OK 403GA 403GB > -MMU OK > -MSR OK > -IRQ KO not implemented > -EXCP ? > - > -PowerPC 403GCX: > -INSN OK > -SPR OK 403GCX > -MMU OK > -MSR OK > -IRQ KO not implemented > -EXCP ? > - > -To be checked: 403GC > - > -*** > -PowerPC 405: > -Checked: 405CRa 405CRb 405CRc 405EP 405GPa 405GPb 405GPc 405GPd 405GPe 405GPR > - Npe405H Npe405H2 Npe405L > -INSN OK > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP OK > -Remarks: Linux 2.4 boots (at least 1 proprietary firmware). > - uboot seems to freeze at boot time. > -To be checked: 405D2 405D4 405EZ 405LP Npe4GS3 STB03 STB04 STB25 > - x2vp4 x2vp7 x2vp20 x2vp50 > - > -XXX: find what is IBM e407b4 > - > -*** > -PowerPC 440: > -Checked: 440EPa 440EPb 440GXa 440GXb 440GXc 440GXf 440SP 440SP2 > -INSN OK > -SPR OK > -MSR OK > -IRQ KO not implemented > -MMU ? > -EXCP ? > - > -PowerPC 440GP: > -Checked: 440GPb 440GPc > -INSN OK > -SPR OK > -MSR OK > -IRQ KO not implemented > -MMU ? > -EXCP ? > - > -PowerPC 440x4: > -Checked: 440A4 440B4 440G4 440H4 > -INSN OK > -SPR OK > -MSR OK > -IRQ KO not implemented > -MMU ? > -EXCP ? > - > -PowerPC 440x5: > -Checked: 440A5 440F5 440G5 440H6 440GRa > -INSN OK > -SPR OK > -MSR OK > -IRQ KO not implemented > -MMU ? > -EXCP ? > - > -To be checked: 440EPx 440GRx 440SPE > - > -*** > -PowerPC 460: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -PowerPC 460F: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -*** > -PowerPC e200: (not implemented) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -*** > -PowerPC e300: (not implemented) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -*** > -PowerPC e500: (not implemented) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -*** > -PowerPC e600: (not implemented) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -*** > -32 bits PowerPC > -PowerPC 601: (601 601v2) > -INSN OK > -SPR OK is HID15 only on 601v2 ? > -MSR OK > -IRQ KO not implemented > -MMU ? > -EXCP ? > -Remarks: some instructions should have a specific behavior (not implemented) > - > -PowerPC 602: 602 > -INSN OK > -SPR OK > -MSR OK > -IRQ OK > -MMU ? > -EXCP ? at least timer and external interrupt are OK > -Remarks: Linux 2.4 crashes when entering user-mode. > - Linux 2.6.22 boots on this CPU but does not recognize it. > - > -PowerPC 603: (603) > -INSN OK > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP OK > -Remarks: Linux 2.4 boots and properly recognizes the CPU > - Linux 2.6.22 idem. > - > -PowerPC 603e: (603e11) > -INSN OK > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP OK > -Remarks: Linux 2.4 boots and properly recognizes the CPU > - Linux 2.6.22 idem. > - > -PowerPC G2: > -INSN OK > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP OK > -Remarks: Linux 2.4 boots, recognizes the CPU as a 82xx. > - Linux 2.6.22 idem. > - > -PowerPC G2le: > -INSN OK > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP OK > -Remarks: Linux 2.4 does not boots. Same symptoms as 602. > - Linux 2.6.22 boots and properly recognizes the CPU. > - > -PowerPC 604: > -INSN OK > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP OK > -Remarks: Linux 2.4 boots and properly recognizes the CPU. > - Linux 2.6.22 idem. > - > -PowerPC 7x0: > -INSN OK > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP OK > -Remarks: Linux 2.4 boots and properly recognizes the CPU. > - Linux 2.6.22 idem. > - > -PowerPC 750fx: > -INSN OK > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP OK > -Remarks: Linux 2.4 boots but does not properly recognizes the CPU. > - Linux 2.6.22 boots and properly recognizes the CPU. > - > -PowerPC 7x5: > -INSN ? > -SPR ? > -MSR ? > -IRQ OK > -MMU ? > -EXCP OK > -Remarks: Linux 2.4 does not boot. > - Linux 2.6.22 idem. > - > -PowerPC 7400: > -INSN KO Altivec missing > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP ? Altivec, ... > -Remarks: Linux 2.4 boots and properly recognize the CPU. > - Linux 2.6.22 idem. > - > -PowerPC 7410: > -INSN KO Altivec missing > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP ? Altivec, ... > -Remarks: Linux 2.4 boots and properly recognize the CPU. > - Linux 2.6.22 idem. > - Note that UM says tlbld & tlbli are implemented but this may be a mistake > - as TLB loads are managed by the hardware and the CPU does not implement the > - needed registers. > - > -PowerPC 7441: > -INSN KO Altivec missing > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP ? Altivec, ... > -Remarks: Linux does not have the code to handle TLB miss on this CPU > - Linux 2.6.22 idem. > - > -PowerPC 7450/7451: > -INSN KO Altivec missing > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP ? Altivec, ... > -Remarks: Linux does not have the code to handle TLB miss on this CPU > - Linux 2.6.22 idem. > - > -PowerPC 7445/7447: > -INSN KO Altivec missing > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP ? Altivec, ... > -Remarks: Linux does not have the code to handle TLB miss on this CPU > - Linux 2.6.22 idem. > - > -PowerPC 7455/7457: > -INSN KO Altivec missing > -SPR OK > -MSR OK > -IRQ OK > -MMU OK > -EXCP ? Altivec, ... > -Remarks: Linux does not have the code to handle TLB miss on this CPU > - Linux 2.6.22 idem. > - > -64 bits PowerPC > -PowerPC 620: (disabled) > -INSN KO > -SPR KO > -MSR ? > -IRQ KO > -MMU KO > -EXCP KO > -Remarks: not much documentation for this implementation... > - > -PowerPC 970: > -INSN KO Altivec missing and more > -SPR KO > -MSR ? > -IRQ OK > -MMU OK > -EXCP KO partially implemented > -Remarks: Should be able to boot but there is no hw platform currently emulated. > - > -PowerPC 970FX: > -INSN KO Altivec missing and more > -SPR KO > -MSR ? > -IRQ OK > -MMU OK > -EXCP KO partially implemented > -Remarks: Should be able to boot but there is no hw platform currently emulated. > - > -PowerPC Cell: > -INSN KO Altivec missing and more > -SPR KO > -MSR ? > -IRQ ? > -MMU ? > -EXCP ? partially implemented > -Remarks: As the core is mostly a 970, should be able to boot. > - SPE are not implemented. > - > -PowerPC 630: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -PowerPC 631: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -POWER4: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -POWER4+: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -POWER5: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -POWER5+: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -POWER6: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -RS64: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -RS64-II: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -RS64-III: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -RS64-IV: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -Original POWER > -POWER: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -POWER2: (disabled: lack of detailed specifications) > -INSN KO > -SPR KO > -MSR KO > -IRQ KO > -MMU KO > -EXCP KO > - > -=============================================================================== > -PowerPC microcontrollers emulation status > - > -Implemementation should be sufficient to boot Linux: > -(there seem to be problems with uboot freezing at some point) > -- PowerPC 405CR > -- PowerPC 405EP > - > -TODO: > -- PowerPC 401 microcontrollers emulation > -- PowerPC 403 microcontrollers emulation > -- more PowerPC 405 microcontrollers emulation > -- Fixes / more features for implemented PowerPC 405 microcontrollers emulation > -- PowerPC 440 microcontrollers emulation > -- e200 microcontrollers emulation > -- e300 microcontrollers emulation > -- e500 microcontrollers emulation > -- e600 microcontrollers emulation > - > -=============================================================================== > -PowerPC based platforms emulation status > - > -* PREP platform (RS/6000 7043...) - TO BE CHECKED (broken) > -- Gentoo Linux live CDROM 1.4 > -- Debian Linux 3.0 > -- Mandrake Linux 9 > - > -* heathrow PowerMac platform (beige PowerMac) - TO BE CHECKED (broken) > -- Gentoo Linux live CDROM 1.4 > -- Debian Linux 3.0 > -- Mandrake Linux 9 > - > -* mac99 platform (white and blue PowerMac, ...) > -- Gentoo Linux live CDROM 1.4 - boots, compiles linux kernel > -- Debian Linux woody - boots from CDROM and HDD > -- Mandrake Linux 9 - boots from CDROM, freezes during install > -- Knoppix 2003-07-13_4 boots from CDROM, pb with X configuration > - distribution bug: X runs with a properly hand-coded configuration. > -- rock Linux 2.0 runs from CDROM > - > -* Linux 2.6 support seems deadly broken (used to boot...). > - > -* PowerPC 405EP reference boards: > -- can boot Linux 2.4 & 2.6. > - Need to provide a flash image ready to boot for reproductible tests. > - > -TODO: > -- URGENT: fix PreP and heathrow platforms > -- PowerPC 64 reference platform > -- MCA based RS/6000 emulation > -- CHRP emulation (not PowerMac) > -- PPAR emulation > -- ePPAR emulation > -- misc PowerPC reference boards emulation > - > -=============================================================================== -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson
© 2016 - 2026 Red Hat, Inc.