When looking to instantiate a TYPE_FW_CFG_MEM or TYPE_FW_CFG_IO device to be
able to wire it up differently, it is much more convenient for the caller to
instantiate the device and have the fw_cfg default files already preloaded
during realize.

Move fw_cfg_init1() to the end of both the fw_cfg_mem_realize() and
fw_cfg_io_realize() functions so it no longer needs to be called manually
when instantiating the device, and also rename it to fw_cfg_common_realize()
which better describes its new purpose.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/nvram/fw_cfg.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c
index 39fcc04..b5f10ac 100644
--- a/hw/nvram/fw_cfg.c
+++ b/hw/nvram/fw_cfg.c
@@ -910,14 +910,12 @@ static void fw_cfg_machine_ready(struct Notifier *n, void *data)
 
 
 
-static void fw_cfg_init1(DeviceState *dev)
+static void fw_cfg_common_realize(DeviceState *dev)
 {
     FWCfgState *s = FW_CFG(dev);
     MachineState *machine = MACHINE(qdev_get_machine());
     uint32_t version = FW_CFG_VERSION;
 
-    qdev_init_nofail(dev);
-
     fw_cfg_add_bytes(s, FW_CFG_SIGNATURE, (char *)"QEMU", 4);
     fw_cfg_add_bytes(s, FW_CFG_UUID, &qemu_uuid, 16);
     fw_cfg_add_i16(s, FW_CFG_NOGRAPHIC, (uint16_t)!machine->enable_graphics);
@@ -949,7 +947,7 @@ FWCfgState *fw_cfg_init_io_dma(uint32_t iobase, uint32_t dma_iobase,
         qdev_prop_set_bit(dev, "dma_enabled", false);
     }
 
-    fw_cfg_init1(dev);
+    qdev_init_nofail(dev);
 
     sbd = SYS_BUS_DEVICE(dev);
     ios = FW_CFG_IO(dev);
@@ -987,7 +985,7 @@ FWCfgState *fw_cfg_init_mem_wide(hwaddr ctl_addr,
         qdev_prop_set_bit(dev, "dma_enabled", false);
     }
 
-    fw_cfg_init1(dev);
+    qdev_init_nofail(dev);
 
     sbd = SYS_BUS_DEVICE(dev);
     sysbus_mmio_map(sbd, 0, ctl_addr);
@@ -1098,6 +1096,8 @@ static void fw_cfg_io_realize(DeviceState *dev, Error **errp)
                               &fw_cfg_dma_mem_ops, FW_CFG(s), "fwcfg.dma",
                               sizeof(dma_addr_t));
     }
+
+    fw_cfg_common_realize(dev);
 }
 
 static void fw_cfg_io_class_init(ObjectClass *klass, void *data)
@@ -1164,6 +1164,8 @@ static void fw_cfg_mem_realize(DeviceState *dev, Error **errp)
                               sizeof(dma_addr_t));
         sysbus_init_mmio(sbd, &FW_CFG(s)->dma_iomem);
     }
+
+    fw_cfg_common_realize(dev);
 }
 
 static void fw_cfg_mem_class_init(ObjectClass *klass, void *data)
-- 
1.7.10.4

On 06/16/17 15:23, Mark Cave-Ayland wrote:
> When looking to instantiate a TYPE_FW_CFG_MEM or TYPE_FW_CFG_IO device to be
> able to wire it up differently, it is much more convenient for the caller to
> instantiate the device and have the fw_cfg default files already preloaded
> during realize.
> 
> Move fw_cfg_init1() to the end of both the fw_cfg_mem_realize() and
> fw_cfg_io_realize() functions so it no longer needs to be called manually
> when instantiating the device, and also rename it to fw_cfg_common_realize()
> which better describes its new purpose.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/nvram/fw_cfg.c |   12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c
> index 39fcc04..b5f10ac 100644
> --- a/hw/nvram/fw_cfg.c
> +++ b/hw/nvram/fw_cfg.c
> @@ -910,14 +910,12 @@ static void fw_cfg_machine_ready(struct Notifier *n, void *data)
>  
>  
>  
> -static void fw_cfg_init1(DeviceState *dev)
> +static void fw_cfg_common_realize(DeviceState *dev)
>  {
>      FWCfgState *s = FW_CFG(dev);
>      MachineState *machine = MACHINE(qdev_get_machine());
>      uint32_t version = FW_CFG_VERSION;
>  
> -    qdev_init_nofail(dev);
> -
>      fw_cfg_add_bytes(s, FW_CFG_SIGNATURE, (char *)"QEMU", 4);
>      fw_cfg_add_bytes(s, FW_CFG_UUID, &qemu_uuid, 16);
>      fw_cfg_add_i16(s, FW_CFG_NOGRAPHIC, (uint16_t)!machine->enable_graphics);
> @@ -949,7 +947,7 @@ FWCfgState *fw_cfg_init_io_dma(uint32_t iobase, uint32_t dma_iobase,
>          qdev_prop_set_bit(dev, "dma_enabled", false);
>      }
>  
> -    fw_cfg_init1(dev);
> +    qdev_init_nofail(dev);
>  
>      sbd = SYS_BUS_DEVICE(dev);
>      ios = FW_CFG_IO(dev);
> @@ -987,7 +985,7 @@ FWCfgState *fw_cfg_init_mem_wide(hwaddr ctl_addr,
>          qdev_prop_set_bit(dev, "dma_enabled", false);
>      }
>  
> -    fw_cfg_init1(dev);
> +    qdev_init_nofail(dev);
>  
>      sbd = SYS_BUS_DEVICE(dev);
>      sysbus_mmio_map(sbd, 0, ctl_addr);
> @@ -1098,6 +1096,8 @@ static void fw_cfg_io_realize(DeviceState *dev, Error **errp)
>                                &fw_cfg_dma_mem_ops, FW_CFG(s), "fwcfg.dma",
>                                sizeof(dma_addr_t));
>      }
> +
> +    fw_cfg_common_realize(dev);
>  }
>  
>  static void fw_cfg_io_class_init(ObjectClass *klass, void *data)
> @@ -1164,6 +1164,8 @@ static void fw_cfg_mem_realize(DeviceState *dev, Error **errp)
>                                sizeof(dma_addr_t));
>          sysbus_init_mmio(sbd, &FW_CFG(s)->dma_iomem);
>      }
> +
> +    fw_cfg_common_realize(dev);
>  }
>  
>  static void fw_cfg_mem_class_init(ObjectClass *klass, void *data)
> 

Right, this looks good now. All the operations keep their relative
order, and whatever remains in fw_cfg_common_realize() seems appropriate
to me for calling from a realize method.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>

Thanks,
Laszlo