ARM pullreq; contains some patches that arrived while I was on holiday, plus the series I sent off before going away, which got reviewed while I was away. thanks -- PMM The following changes since commit c077a998eb3fcae2d048e3baeb5bc592d30fddde: Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20170531' into staging (2017-06-01 15:50:40 +0100) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170601 for you to fetch changes up to cdc58be430b0bdeaef282e2e70f8135ae531616d: hw/arm/virt: fdt: generate distance-map when needed (2017-06-01 17:27:07 +0100) ---------------------------------------------------------------- target-arm queue: * virt: numa: provide ACPI distance info when needed * aspeed: fix i2c controller bugs * aspeed: add temperature sensor device * M profile: support MPU * gicv3: fix mishandling of BPR1, VBPR1 * load_uboot_image: don't assume a full header read * libvixl: Correct build failures on NetBSD ---------------------------------------------------------------- Andrew Jones (3): load_uboot_image: don't assume a full header read hw/arm/virt-acpi-build: build SLIT when needed hw/arm/virt: fdt: generate distance-map when needed Cédric Le Goater (6): aspeed/i2c: improve command handling aspeed/i2c: handle LAST command under the RX command aspeed/i2c: introduce a state machine aspeed: add some I2C devices to the Aspeed machines hw/misc: add a TMP42{1,2,3} device model aspeed: add a temp sensor device on I2C bus 3 Kamil Rytarowski (1): libvixl: Correct build failures on NetBSD Michael Davidsaver (4): armv7m: Improve "-d mmu" tracing for PMSAv7 MPU armv7m: Implement M profile default memory map armv7m: Classify faults as MemManage or BusFault arm: add MPU support to M profile CPUs Peter Maydell (12): hw/intc/arm_gicv3_cpuif: Fix reset value for VMCR_EL2.VBPR1 hw/intc/arm_gicv3_cpuif: Don't let BPR be set below its minimum hw/intc/arm_gicv3_cpuif: Fix priority masking for NS BPR1 arm: Use the mmu_idx we're passed in arm_cpu_do_unaligned_access() arm: Add support for M profile CPUs having different MMU index semantics arm: Use different ARMMMUIdx values for M profile arm: Clean up handling of no-MPU PMSA CPUs arm: Don't clear ARM_FEATURE_PMSA for no-mpu configs arm: Don't let no-MPU PMSA cores write to SCTLR.M arm: Remove unnecessary check on cpu->pmsav7_dregion arm: All M profile cores are PMSA arm: Implement HFNMIENA support for M profile MPU Wei Huang (1): target/arm: clear PMUVER field of AA64DFR0 when vPMU=off disas/libvixl/Makefile.objs | 3 + hw/misc/Makefile.objs | 1 + target/arm/cpu.h | 118 ++++++++++-- target/arm/translate.h | 2 +- hw/arm/aspeed.c | 36 ++++ hw/arm/virt-acpi-build.c | 4 + hw/arm/virt.c | 21 +++ hw/core/loader.c | 3 +- hw/i2c/aspeed_i2c.c | 65 ++++++- hw/intc/arm_gicv3_cpuif.c | 50 ++++- hw/intc/armv7m_nvic.c | 104 +++++++++++ hw/misc/tmp421.c | 401 ++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 28 ++- target/arm/helper.c | 338 ++++++++++++++++++++++----------- target/arm/machine.c | 7 +- target/arm/op_helper.c | 3 +- target/arm/translate-a64.c | 18 +- target/arm/translate.c | 14 +- default-configs/arm-softmmu.mak | 1 + 19 files changed, 1060 insertions(+), 157 deletions(-) create mode 100644 hw/misc/tmp421.c From: Kamil Rytarowski <n54@gmx.com> Ensure that C99 macros are defined regardless of the inclusion order of headers in vixl. This is required at least on NetBSD. The vixl/globals.h headers defines __STDC_CONSTANT_MACROS and must be included before other system headers. This file defines unconditionally the following macros, without altering the original sources: - __STDC_CONSTANT_MACROS - __STDC_LIMIT_MACROS - __STDC_FORMAT_MACROS Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170514051820.15985-1-n54@gmx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- disas/libvixl/Makefile.objs | 3 +++ 1 file changed, 3 insertions(+) diff --git a/disas/libvixl/Makefile.objs b/disas/libvixl/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/disas/libvixl/Makefile.objs +++ b/disas/libvixl/Makefile.objs @@ -XXX,XX +XXX,XX @@ libvixl_OBJS = vixl/utils.o \ # The -Wno-sign-compare is needed only for gcc 4.6, which complains about # some signed-unsigned equality comparisons which later gcc versions do not. $(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CFLAGS := -I$(SRC_PATH)/disas/libvixl $(QEMU_CFLAGS) -Wno-sign-compare +# Ensure that C99 macros are defined regardless of the inclusion order of +# headers in vixl. This is required at least on NetBSD. +$(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CFLAGS += -D__STDC_CONSTANT_MACROS -D__STDC_LIMIT_MACROS -D__STDC_FORMAT_MACROS common-obj-$(CONFIG_ARM_A64_DIS) += $(libvixl_OBJS) -- 2.7.4 From: Andrew Jones <drjones@redhat.com> Don't allow load_uboot_image() to proceed when less bytes than header-size was read. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20170524091315.20284-1-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/loader.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ static int load_uboot_image(const char *filename, hwaddr *ep, hwaddr *loadaddr, return -1; size = read(fd, hdr, sizeof(uboot_image_header_t)); - if (size < 0) + if (size < sizeof(uboot_image_header_t)) { goto out; + } bswap_uboot_header(hdr); -- 2.7.4 We were setting the VBPR1 field of VMCR_EL2 to icv_min_vbpr() on reset, but this is not correct. The field should reset to the minimum value of ICV_BPR0_EL1 plus one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493226792-3237-2-git-send-email-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) cs->ich_hcr_el2 = 0; memset(cs->ich_lr_el2, 0, sizeof(cs->ich_lr_el2)); cs->ich_vmcr_el2 = ICH_VMCR_EL2_VFIQEN | - (icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR1_SHIFT) | + ((icv_min_vbpr(cs) + 1) << ICH_VMCR_EL2_VBPR1_SHIFT) | (icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR0_SHIFT); } -- 2.7.4 icc_bpr_write() was not enforcing that writing a value below the minimum for the BPR should behave as if the BPR was set to the minimum value. This doesn't make a difference for the secure BPRs (since we define the minimum for the QEMU implementation as zero) but did mean we were allowing the NS BPR1 to be set to 0 when 1 should be the lowest value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493226792-3237-3-git-send-email-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void icc_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri, { GICv3CPUState *cs = icc_cs_from_env(env); int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1; + uint64_t minval; if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) { icv_bpr_write(env, ri, value); @@ -XXX,XX +XXX,XX @@ static void icc_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri, return; } + minval = (grp == GICV3_G1NS) ? GIC_MIN_BPR_NS : GIC_MIN_BPR; + if (value < minval) { + value = minval; + } + cs->icc_bpr[grp] = value & 7; gicv3_cpuif_update(cs); } -- 2.7.4 When we calculate the mask to use to get the group priority from an interrupt priority, the way that NS BPR1 is handled differs from how BPR0 and S BPR1 work -- a BPR1 value of 1 means the group priority is in bits [7:1], whereas for BPR0 and S BPR1 this is indicated by a 0 BPR value. Subtract 1 from the BPR value before creating the mask if we're using the NS BPR value, for both hardware and virtual interrupts, as the GICv3 pseudocode does, and fix the comments accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493226792-3237-4-git-send-email-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 42 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 4 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static uint32_t icv_gprio_mask(GICv3CPUState *cs, int group) { /* Return a mask word which clears the subpriority bits from * a priority value for a virtual interrupt in the specified group. - * This depends on the VBPR value: + * This depends on the VBPR value. + * If using VBPR0 then: * a BPR of 0 means the group priority bits are [7:1]; * a BPR of 1 means they are [7:2], and so on down to * a BPR of 7 meaning no group priority bits at all. + * If using VBPR1 then: + * a BPR of 0 is impossible (the minimum value is 1) + * a BPR of 1 means the group priority bits are [7:1]; + * a BPR of 2 means they are [7:2], and so on down to + * a BPR of 7 meaning the group priority is [7]. + * * Which BPR to use depends on the group of the interrupt and * the current ICH_VMCR_EL2.VCBPR settings. + * + * This corresponds to the VGroupBits() pseudocode. */ + int bpr; + if (group == GICV3_G1NS && cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR) { group = GICV3_G0; } - return ~0U << (read_vbpr(cs, group) + 1); + bpr = read_vbpr(cs, group); + if (group == GICV3_G1NS) { + assert(bpr > 0); + bpr--; + } + + return ~0U << (bpr + 1); } static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) @@ -XXX,XX +XXX,XX @@ static uint32_t icc_gprio_mask(GICv3CPUState *cs, int group) { /* Return a mask word which clears the subpriority bits from * a priority value for an interrupt in the specified group. - * This depends on the BPR value: + * This depends on the BPR value. For CBPR0 (S or NS): * a BPR of 0 means the group priority bits are [7:1]; * a BPR of 1 means they are [7:2], and so on down to * a BPR of 7 meaning no group priority bits at all. + * For CBPR1 NS: + * a BPR of 0 is impossible (the minimum value is 1) + * a BPR of 1 means the group priority bits are [7:1]; + * a BPR of 2 means they are [7:2], and so on down to + * a BPR of 7 meaning the group priority is [7]. + * * Which BPR to use depends on the group of the interrupt and * the current ICC_CTLR.CBPR settings. + * + * This corresponds to the GroupBits() pseudocode. */ + int bpr; + if ((group == GICV3_G1 && cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR) || (group == GICV3_G1NS && cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) { group = GICV3_G0; } - return ~0U << ((cs->icc_bpr[group] & 7) + 1); + bpr = cs->icc_bpr[group] & 7; + + if (group == GICV3_G1NS) { + assert(bpr > 0); + bpr--; + } + + return ~0U << (bpr + 1); } static bool icc_no_enabled_hppi(GICv3CPUState *cs) -- 2.7.4 From: Wei Huang <wei@redhat.com> The PMUv3 driver of linux kernel (in arch/arm64/kernel/perf_event.c) relies on the PMUVER field of id_aa64dfr0_el1 to decide if PMU support is present or not. This patch clears the PMUVER field under TCG mode when vPMU=off. Without it, PMUv3 will init insider guest VMs even with vPMU=off. This patch also removes a redundant line inside the if-statement. Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1495123889-32301-1-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (!cpu->has_pmu) { - cpu->has_pmu = false; unset_feature(env, ARM_FEATURE_PMU); + cpu->id_aa64dfr0 &= ~0xf00; } if (!arm_feature(env, ARM_FEATURE_EL2)) { -- 2.7.4 When identifying the DFSR format for an alignment fault, use the mmu index that we are passed, rather than calling cpu_mmu_index() to get the mmu index for the current CPU state. This doesn't actually make any difference since the only cases where the current MMU index differs from the index used for the load are the "unprivileged load/store" instructions, and in that case the mmu index may differ but the translation regime is the same (apart from the "use from Hyp mode" case which is UNPREDICTABLE). However it's the more logical thing to do. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-2-git-send-email-peter.maydell@linaro.org --- target/arm/op_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, /* the DFSR for an alignment fault depends on whether we're using * the LPAE long descriptor format, or the short descriptor format */ - if (arm_s1_regime_using_lpae_format(env, cpu_mmu_index(env, false))) { + if (arm_s1_regime_using_lpae_format(env, mmu_idx)) { env->exception.fsr = (1 << 9) | 0x21; } else { env->exception.fsr = 0x1; -- 2.7.4 The M profile CPU's MPU has an awkward corner case which we would like to implement with a different MMU index. We can avoid having to bump the number of MMU modes ARM uses, because some of our existing MMU indexes are only used by non-M-profile CPUs, so we can borrow one. To avoid that getting too confusing, clean up the code to try to keep the two meanings of the index separate. Instead of ARMMMUIdx enum values being identical to core QEMU MMU index values, they are now the core index values with some high bits set. Any particular CPU always uses the same high bits (so eventually A profile cores and M profile cores will use different bits). New functions arm_to_core_mmu_idx() and core_to_arm_mmu_idx() convert between the two. In general core index values are stored in 'int' types, and ARM values are stored in ARMMMUIdx types. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1493122030-32191-3-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 71 ++++++++++++++++----- target/arm/translate.h | 2 +- target/arm/helper.c | 151 ++++++++++++++++++++++++--------------------- target/arm/op_helper.c | 3 +- target/arm/translate-a64.c | 18 ++++-- target/arm/translate.c | 10 +-- 6 files changed, 156 insertions(+), 99 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * for the accesses done as part of a stage 1 page table walk, rather than * having to walk the stage 2 page table over and over.) * + * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code + * are not quite the same -- different CPU types (most notably M profile + * vs A/R profile) would like to use MMU indexes with different semantics, + * but since we don't ever need to use all of those in a single CPU we + * can avoid setting NB_MMU_MODES to more than 8. The lower bits of + * ARMMMUIdx are the core TLB mmu index, and the higher bits are always + * the same for any particular CPU. + * Variables of type ARMMUIdx are always full values, and the core + * index values are in variables of type 'int'. + * * Our enumeration includes at the end some entries which are not "true" * mmu_idx values in that they don't have corresponding TLBs and are only * valid for doing slow path page table walks. @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * of the AT/ATS operations. * The values used are carefully arranged to make mmu_idx => EL lookup easy. */ +#define ARM_MMU_IDX_A 0x10 /* A profile (and M profile, for the moment) */ +#define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */ + +#define ARM_MMU_IDX_TYPE_MASK (~0x7) +#define ARM_MMU_IDX_COREIDX_MASK 0x7 + typedef enum ARMMMUIdx { - ARMMMUIdx_S12NSE0 = 0, - ARMMMUIdx_S12NSE1 = 1, - ARMMMUIdx_S1E2 = 2, - ARMMMUIdx_S1E3 = 3, - ARMMMUIdx_S1SE0 = 4, - ARMMMUIdx_S1SE1 = 5, - ARMMMUIdx_S2NS = 6, + ARMMMUIdx_S12NSE0 = 0 | ARM_MMU_IDX_A, + ARMMMUIdx_S12NSE1 = 1 | ARM_MMU_IDX_A, + ARMMMUIdx_S1E2 = 2 | ARM_MMU_IDX_A, + ARMMMUIdx_S1E3 = 3 | ARM_MMU_IDX_A, + ARMMMUIdx_S1SE0 = 4 | ARM_MMU_IDX_A, + ARMMMUIdx_S1SE1 = 5 | ARM_MMU_IDX_A, + ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A, /* Indexes below here don't have TLBs and are used only for AT system * instructions or for the first stage of an S12 page table walk. */ - ARMMMUIdx_S1NSE0 = 7, - ARMMMUIdx_S1NSE1 = 8, + ARMMMUIdx_S1NSE0 = 0 | ARM_MMU_IDX_NOTLB, + ARMMMUIdx_S1NSE1 = 1 | ARM_MMU_IDX_NOTLB, } ARMMMUIdx; +/* Bit macros for the core-mmu-index values for each index, + * for use when calling tlb_flush_by_mmuidx() and friends. + */ +typedef enum ARMMMUIdxBit { + ARMMMUIdxBit_S12NSE0 = 1 << 0, + ARMMMUIdxBit_S12NSE1 = 1 << 1, + ARMMMUIdxBit_S1E2 = 1 << 2, + ARMMMUIdxBit_S1E3 = 1 << 3, + ARMMMUIdxBit_S1SE0 = 1 << 4, + ARMMMUIdxBit_S1SE1 = 1 << 5, + ARMMMUIdxBit_S2NS = 1 << 6, +} ARMMMUIdxBit; + #define MMU_USER_IDX 0 +static inline int arm_to_core_mmu_idx(ARMMMUIdx mmu_idx) +{ + return mmu_idx & ARM_MMU_IDX_COREIDX_MASK; +} + +static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) +{ + return mmu_idx | ARM_MMU_IDX_A; +} + /* Return the exception level we're running at if this is our mmu_idx */ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) { - assert(mmu_idx < ARMMMUIdx_S2NS); - return mmu_idx & 3; + switch (mmu_idx & ARM_MMU_IDX_TYPE_MASK) { + case ARM_MMU_IDX_A: + return mmu_idx & 3; + default: + g_assert_not_reached(); + } } /* Determine the current mmu_idx to use for normal loads/stores */ @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) int el = arm_current_el(env); if (el < 2 && arm_is_secure_below_el3(env)) { - return ARMMMUIdx_S1SE0 + el; + return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0 + el); } return el; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx) static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *flags) { - ARMMMUIdx mmu_idx = cpu_mmu_index(env, false); + ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); if (is_a64(env)) { *pc = env->pc; *flags = ARM_TBFLAG_AARCH64_STATE_MASK; @@ -XXX,XX +XXX,XX @@ static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, << ARM_TBFLAG_XSCALE_CPAR_SHIFT); } - *flags |= (mmu_idx << ARM_TBFLAG_MMUIDX_SHIFT); + *flags |= (arm_to_core_mmu_idx(mmu_idx) << ARM_TBFLAG_MMUIDX_SHIFT); /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine * states defined in the ARM ARM for software singlestep: diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline int arm_dc_feature(DisasContext *dc, int feature) static inline int get_mem_index(DisasContext *s) { - return s->mmu_idx; + return arm_to_core_mmu_idx(s->mmu_idx); } /* Function used to determine the target exception EL when otherwise not known diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void tlbiall_nsnh_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = ENV_GET_CPU(env); tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } static void tlbiall_nsnh_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiall_nsnh_is_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = ENV_GET_CPU(env); tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } static void tlbiipas2_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiipas2_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 40); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S2NS)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S2NS); } static void tlbiipas2_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiipas2_is_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 40); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S2NS); } static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_S1E2); } static void tlbiall_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiall_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx_all_cpus_synced(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_S1E2); } static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = ENV_GET_CPU(env); uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S1E2)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S1E2); } static void tlbimva_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbimva_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1E2)); + ARMMMUIdxBit_S1E2); } static const ARMCPRegInfo cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Accesses to VTTBR may change the VMID so we must flush the TLB. */ if (raw_read(env, ri) != value) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); raw_write(env, ri, value); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vmalle1_write(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_is_secure_below_el3(env)) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vmalle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, if (sec) { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle1_write(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_is_secure_below_el3(env)) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { if (arm_feature(env, ARM_FEATURE_EL2)) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } else { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle2_write(CPUARMState *env, const ARMCPRegInfo *ri, ARMCPU *cpu = arm_env_get_cpu(env); CPUState *cs = CPU(cpu); - tlb_flush_by_mmuidx(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_S1E2); } static void tlbi_aa64_alle3_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle3_write(CPUARMState *env, const ARMCPRegInfo *ri, ARMCPU *cpu = arm_env_get_cpu(env); CPUState *cs = CPU(cpu); - tlb_flush_by_mmuidx(cs, (1 << ARMMMUIdx_S1E3)); + tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_S1E3); } static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, if (sec) { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else if (has_el2) { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } else { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle2is_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx_all_cpus_synced(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_S1E2); } static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx_all_cpus_synced(cs, (1 << ARMMMUIdx_S1E3)); + tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_S1E3); } static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_is_secure_below_el3(env)) { tlb_flush_page_by_mmuidx(cs, pageaddr, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_page_by_mmuidx(cs, pageaddr, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = CPU(cpu); uint64_t pageaddr = sextract64(value << 12, 0, 56); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S1E2)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S1E2); } static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = CPU(cpu); uint64_t pageaddr = sextract64(value << 12, 0, 56); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S1E3)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S1E3); } static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, if (sec) { tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2is_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t pageaddr = sextract64(value << 12, 0, 56); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1E2)); + ARMMMUIdxBit_S1E2); } static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t pageaddr = sextract64(value << 12, 0, 56); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1E3)); + ARMMMUIdxBit_S1E3); } static void tlbi_aa64_ipas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_ipas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 48); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S2NS)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S2NS); } static void tlbi_aa64_ipas2e1is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_ipas2e1is_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 48); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S2NS); } static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static inline TCR *regime_tcr(CPUARMState *env, ARMMMUIdx mmu_idx) return &env->cp15.tcr_el[regime_el(env, mmu_idx)]; } +/* Convert a possible stage1+2 MMU index into the appropriate + * stage 1 MMU index + */ +static inline ARMMMUIdx stage_1_mmu_idx(ARMMMUIdx mmu_idx) +{ + if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { + mmu_idx += (ARMMMUIdx_S1NSE0 - ARMMMUIdx_S12NSE0); + } + return mmu_idx; +} + /* Returns TBI0 value for current regime el */ uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx) { @@ -XXX,XX +XXX,XX @@ uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx) uint32_t el; /* For EL0 and EL1, TBI is controlled by stage 1's TCR, so convert - * a stage 1+2 mmu index into the appropriate stage 1 mmu index. - */ - if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { - mmu_idx += ARMMMUIdx_S1NSE0; - } + * a stage 1+2 mmu index into the appropriate stage 1 mmu index. + */ + mmu_idx = stage_1_mmu_idx(mmu_idx); tcr = regime_tcr(env, mmu_idx); el = regime_el(env, mmu_idx); @@ -XXX,XX +XXX,XX @@ uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx) uint32_t el; /* For EL0 and EL1, TBI is controlled by stage 1's TCR, so convert - * a stage 1+2 mmu index into the appropriate stage 1 mmu index. - */ - if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { - mmu_idx += ARMMMUIdx_S1NSE0; - } + * a stage 1+2 mmu index into the appropriate stage 1 mmu index. + */ + mmu_idx = stage_1_mmu_idx(mmu_idx); tcr = regime_tcr(env, mmu_idx); el = regime_el(env, mmu_idx); @@ -XXX,XX +XXX,XX @@ static inline bool regime_using_lpae_format(CPUARMState *env, * on whether the long or short descriptor format is in use. */ bool arm_s1_regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx) { - if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { - mmu_idx += ARMMMUIdx_S1NSE0; - } + mmu_idx = stage_1_mmu_idx(mmu_idx); return regime_using_lpae_format(env, mmu_idx); } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, int ret; ret = get_phys_addr(env, address, access_type, - mmu_idx + ARMMMUIdx_S1NSE0, &ipa, attrs, + stage_1_mmu_idx(mmu_idx), &ipa, attrs, prot, page_size, fsr, fi); /* If S1 fails or S2 is disabled, return early. */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, /* * For non-EL2 CPUs a stage1+stage2 translation is just stage 1. */ - mmu_idx += ARMMMUIdx_S1NSE0; + mmu_idx = stage_1_mmu_idx(mmu_idx); } } @@ -XXX,XX +XXX,XX @@ bool arm_tlb_fill(CPUState *cs, vaddr address, int ret; MemTxAttrs attrs = {}; - ret = get_phys_addr(env, address, access_type, mmu_idx, &phys_addr, + ret = get_phys_addr(env, address, access_type, + core_to_arm_mmu_idx(env, mmu_idx), &phys_addr, &attrs, &prot, &page_size, fsr, fi); if (!ret) { /* Map a single [sub]page. */ @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, bool ret; uint32_t fsr; ARMMMUFaultInfo fi = {}; + ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, cpu_mmu_index(env, false), &phys_addr, + ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fsr, &fi); if (ret) { diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, int target_el; bool same_el; uint32_t syn; + ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); if (retaddr) { /* now we have a real cpu fault */ @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, /* the DFSR for an alignment fault depends on whether we're using * the LPAE long descriptor format, or the short descriptor format */ - if (arm_s1_regime_using_lpae_format(env, mmu_idx)) { + if (arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { env->exception.fsr = (1 << 9) | 0x21; } else { env->exception.fsr = 0x1; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void a64_translate_init(void) offsetof(CPUARMState, exclusive_high), "exclusive_high"); } -static inline ARMMMUIdx get_a64_user_mem_index(DisasContext *s) +static inline int get_a64_user_mem_index(DisasContext *s) { - /* Return the mmu_idx to use for A64 "unprivileged load/store" insns: + /* Return the core mmu_idx to use for A64 "unprivileged load/store" insns: * if EL1, access as if EL0; otherwise access at current EL */ + ARMMMUIdx useridx; + switch (s->mmu_idx) { case ARMMMUIdx_S12NSE1: - return ARMMMUIdx_S12NSE0; + useridx = ARMMMUIdx_S12NSE0; + break; case ARMMMUIdx_S1SE1: - return ARMMMUIdx_S1SE0; + useridx = ARMMMUIdx_S1SE0; + break; case ARMMMUIdx_S2NS: g_assert_not_reached(); default: - return s->mmu_idx; + useridx = s->mmu_idx; + break; } + return arm_to_core_mmu_idx(useridx); } void aarch64_cpu_dump_state(CPUState *cs, FILE *f, @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code_a64(ARMCPU *cpu, TranslationBlock *tb) dc->be_data = ARM_TBFLAG_BE_DATA(tb->flags) ? MO_BE : MO_LE; dc->condexec_mask = 0; dc->condexec_cond = 0; - dc->mmu_idx = ARM_TBFLAG_MMUIDX(tb->flags); + dc->mmu_idx = core_to_arm_mmu_idx(env, ARM_TBFLAG_MMUIDX(tb->flags)); dc->tbi0 = ARM_TBFLAG_TBI0(tb->flags); dc->tbi1 = ARM_TBFLAG_TBI1(tb->flags); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_set_da_iss(DisasContext *s, TCGMemOp memop, ISSInfo issinfo) disas_set_insn_syndrome(s, syn); } -static inline ARMMMUIdx get_a32_user_mem_index(DisasContext *s) +static inline int get_a32_user_mem_index(DisasContext *s) { - /* Return the mmu_idx to use for A32/T32 "unprivileged load/store" + /* Return the core mmu_idx to use for A32/T32 "unprivileged load/store" * insns: * if PL2, UNPREDICTABLE (we choose to implement as if PL0) * otherwise, access as if at PL0. @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx get_a32_user_mem_index(DisasContext *s) case ARMMMUIdx_S1E2: /* this one is UNPREDICTABLE */ case ARMMMUIdx_S12NSE0: case ARMMMUIdx_S12NSE1: - return ARMMMUIdx_S12NSE0; + return arm_to_core_mmu_idx(ARMMMUIdx_S12NSE0); case ARMMMUIdx_S1E3: case ARMMMUIdx_S1SE0: case ARMMMUIdx_S1SE1: - return ARMMMUIdx_S1SE0; + return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0); case ARMMMUIdx_S2NS: default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) dc->be_data = ARM_TBFLAG_BE_DATA(tb->flags) ? MO_BE : MO_LE; dc->condexec_mask = (ARM_TBFLAG_CONDEXEC(tb->flags) & 0xf) << 1; dc->condexec_cond = ARM_TBFLAG_CONDEXEC(tb->flags) >> 4; - dc->mmu_idx = ARM_TBFLAG_MMUIDX(tb->flags); + dc->mmu_idx = core_to_arm_mmu_idx(env, ARM_TBFLAG_MMUIDX(tb->flags)); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); #if !defined(CONFIG_USER_ONLY) dc->user = (dc->current_el == 0); -- 2.7.4 Make M profile use completely separate ARMMMUIdx values from those that A profile CPUs use. This is a prelude to adding support for the MPU and for v8M, which together will require 6 MMU indexes which don't map cleanly onto the A profile uses: non secure User non secure Privileged non secure Privileged, execution priority < 0 secure User secure Privileged secure Privileged, execution priority < 0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1493122030-32191-4-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 21 +++++++++++++++++++-- target/arm/helper.c | 5 +++++ target/arm/translate.c | 3 +++ 3 files changed, 27 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * of the AT/ATS operations. * The values used are carefully arranged to make mmu_idx => EL lookup easy. */ -#define ARM_MMU_IDX_A 0x10 /* A profile (and M profile, for the moment) */ +#define ARM_MMU_IDX_A 0x10 /* A profile */ #define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */ +#define ARM_MMU_IDX_M 0x40 /* M profile */ #define ARM_MMU_IDX_TYPE_MASK (~0x7) #define ARM_MMU_IDX_COREIDX_MASK 0x7 @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdx { ARMMMUIdx_S1SE0 = 4 | ARM_MMU_IDX_A, ARMMMUIdx_S1SE1 = 5 | ARM_MMU_IDX_A, ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A, + ARMMMUIdx_MUser = 0 | ARM_MMU_IDX_M, + ARMMMUIdx_MPriv = 1 | ARM_MMU_IDX_M, /* Indexes below here don't have TLBs and are used only for AT system * instructions or for the first stage of an S12 page table walk. */ @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { ARMMMUIdxBit_S1SE0 = 1 << 4, ARMMMUIdxBit_S1SE1 = 1 << 5, ARMMMUIdxBit_S2NS = 1 << 6, + ARMMMUIdxBit_MUser = 1 << 0, + ARMMMUIdxBit_MPriv = 1 << 1, } ARMMMUIdxBit; #define MMU_USER_IDX 0 @@ -XXX,XX +XXX,XX @@ static inline int arm_to_core_mmu_idx(ARMMMUIdx mmu_idx) static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) { - return mmu_idx | ARM_MMU_IDX_A; + if (arm_feature(env, ARM_FEATURE_M)) { + return mmu_idx | ARM_MMU_IDX_M; + } else { + return mmu_idx | ARM_MMU_IDX_A; + } } /* Return the exception level we're running at if this is our mmu_idx */ @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) switch (mmu_idx & ARM_MMU_IDX_TYPE_MASK) { case ARM_MMU_IDX_A: return mmu_idx & 3; + case ARM_MMU_IDX_M: + return mmu_idx & 1; default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) { int el = arm_current_el(env); + if (arm_feature(env, ARM_FEATURE_M)) { + ARMMMUIdx mmu_idx = el == 0 ? ARMMMUIdx_MUser : ARMMMUIdx_MPriv; + + return arm_to_core_mmu_idx(mmu_idx); + } + if (el < 2 && arm_is_secure_below_el3(env)) { return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0 + el); } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t regime_el(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1SE1: case ARMMMUIdx_S1NSE0: case ARMMMUIdx_S1NSE1: + case ARMMMUIdx_MPriv: + case ARMMMUIdx_MUser: return 1; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_secure(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1NSE1: case ARMMMUIdx_S1E2: case ARMMMUIdx_S2NS: + case ARMMMUIdx_MPriv: + case ARMMMUIdx_MUser: return false; case ARMMMUIdx_S1E3: case ARMMMUIdx_S1SE0: @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_user(CPUARMState *env, ARMMMUIdx mmu_idx) switch (mmu_idx) { case ARMMMUIdx_S1SE0: case ARMMMUIdx_S1NSE0: + case ARMMMUIdx_MUser: return true; default: return false; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline int get_a32_user_mem_index(DisasContext *s) case ARMMMUIdx_S1SE0: case ARMMMUIdx_S1SE1: return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0); + case ARMMMUIdx_MUser: + case ARMMMUIdx_MPriv: + return arm_to_core_mmu_idx(ARMMMUIdx_MUser); case ARMMMUIdx_S2NS: default: g_assert_not_reached(); -- 2.7.4 ARM CPUs come in two flavours: * proper MMU ("VMSA") * only an MPU ("PMSA") For PMSA, the MPU may be implemented, or not (in which case there is default "always acts the same" behaviour, but it isn't guest programmable). QEMU is a bit confused about how we indicate this: we have an ARM_FEATURE_MPU, but it's not clear whether this indicates "PMSA, not VMSA" or "PMSA and MPU present" , and sometimes we use it for one purpose and sometimes the other. Currently trying to implement a PMSA-without-MPU core won't work correctly because we turn off the ARM_FEATURE_MPU bit and then a lot of things which should still exist get turned off too. As the first step in cleaning this up, rename the feature bit to ARM_FEATURE_PMSA, which indicates a PMSA CPU (with or without MPU). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-5-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 2 +- target/arm/cpu.c | 12 ++++++------ target/arm/helper.c | 12 ++++++------ target/arm/machine.c | 2 +- 4 files changed, 14 insertions(+), 14 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V6K, ARM_FEATURE_V7, ARM_FEATURE_THUMB2, - ARM_FEATURE_MPU, /* Only has Memory Protection Unit, not full MMU. */ + ARM_FEATURE_PMSA, /* no MMU; may have Memory Protection Unit */ ARM_FEATURE_VFP3, ARM_FEATURE_VFP_FP16, ARM_FEATURE_NEON, diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) &error_abort); } - if (arm_feature(&cpu->env, ARM_FEATURE_MPU)) { + if (arm_feature(&cpu->env, ARM_FEATURE_PMSA)) { qdev_property_add_static(DEVICE(obj), &arm_cpu_has_mpu_property, &error_abort); if (arm_feature(&cpu->env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && - !arm_feature(env, ARM_FEATURE_MPU)) { + !arm_feature(env, ARM_FEATURE_PMSA)) { /* v7VMSA drops support for the old ARMv5 tiny pages, so we * can use 4K pages. */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (!cpu->has_mpu) { - unset_feature(env, ARM_FEATURE_MPU); + unset_feature(env, ARM_FEATURE_PMSA); } - if (arm_feature(env, ARM_FEATURE_MPU) && + if (arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7)) { uint32_t nr = cpu->pmsav7_dregion; @@ -XXX,XX +XXX,XX @@ static void arm946_initfn(Object *obj) cpu->dtb_compatible = "arm,arm946"; set_feature(&cpu->env, ARM_FEATURE_V5); - set_feature(&cpu->env, ARM_FEATURE_MPU); + set_feature(&cpu->env, ARM_FEATURE_PMSA); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); cpu->midr = 0x41059461; cpu->ctr = 0x0f004006; @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_THUMB_DIV); set_feature(&cpu->env, ARM_FEATURE_ARM_DIV); set_feature(&cpu->env, ARM_FEATURE_V7MP); - set_feature(&cpu->env, ARM_FEATURE_MPU); + set_feature(&cpu->env, ARM_FEATURE_PMSA); cpu->midr = 0x411fc153; /* r1p3 */ cpu->id_pfr0 = 0x0131; cpu->id_pfr1 = 0x001; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri, { ARMCPU *cpu = arm_env_get_cpu(env); - if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_MPU) + if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_PMSA) && !extended_addresses_enabled(env)) { /* For VMSA (when not using the LPAE long descriptor page table * format) this register includes the ASID, so do a TLB flush. @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, v6k_cp_reginfo); } if (arm_feature(env, ARM_FEATURE_V7MP) && - !arm_feature(env, ARM_FEATURE_MPU)) { + !arm_feature(env, ARM_FEATURE_PMSA)) { define_arm_cp_regs(cpu, v7mp_cp_reginfo); } if (arm_feature(env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } } - if (arm_feature(env, ARM_FEATURE_MPU)) { + if (arm_feature(env, ARM_FEATURE_PMSA)) { if (arm_feature(env, ARM_FEATURE_V6)) { /* PMSAv6 not implemented */ assert(arm_feature(env, ARM_FEATURE_V7)); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, id_pre_v8_midr_cp_reginfo); } define_arm_cp_regs(cpu, id_cp_reginfo); - if (!arm_feature(env, ARM_FEATURE_MPU)) { + if (!arm_feature(env, ARM_FEATURE_PMSA)) { define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo); } else if (arm_feature(env, ARM_FEATURE_V7)) { define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, /* pmsav7 has special handling for when MPU is disabled so call it before * the common MMU/MPU disabled check below. */ - if (arm_feature(env, ARM_FEATURE_MPU) && + if (arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7)) { *page_size = TARGET_PAGE_SIZE; return get_phys_addr_pmsav7(env, address, access_type, mmu_idx, @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, return 0; } - if (arm_feature(env, ARM_FEATURE_MPU)) { + if (arm_feature(env, ARM_FEATURE_PMSA)) { /* Pre-v7 MPU */ *page_size = TARGET_PAGE_SIZE; return get_phys_addr_pmsav5(env, address, access_type, mmu_idx, diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static bool pmsav7_needed(void *opaque) ARMCPU *cpu = opaque; CPUARMState *env = &cpu->env; - return arm_feature(env, ARM_FEATURE_MPU) && + return arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7); } -- 2.7.4 Fix the handling of QOM properties for PMSA CPUs with no MPU: Allow no-MPU to be specified by either: * has-mpu = false * pmsav7_dregion = 0 and make setting one imply the other. Don't clear the PMSA feature bit in this situation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-6-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) cpu->id_pfr1 &= ~0xf000; } + /* MPU can be configured out of a PMSA CPU either by setting has-mpu + * to false or by setting pmsav7-dregion to 0. + */ if (!cpu->has_mpu) { - unset_feature(env, ARM_FEATURE_PMSA); + cpu->pmsav7_dregion = 0; + } + if (cpu->pmsav7_dregion == 0) { + cpu->has_mpu = false; } if (arm_feature(env, ARM_FEATURE_PMSA) && -- 2.7.4 If the CPU is a PMSA config with no MPU implemented, then the SCTLR.M bit should be RAZ/WI, so that the guest can never turn on the non-existent MPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-7-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, return; } + if (arm_feature(env, ARM_FEATURE_PMSA) && !cpu->has_mpu) { + /* M bit is RAZ/WI for PMSA with no MPU implemented */ + value &= ~SCTLR_M; + } + raw_write(env, ri, value); /* ??? Lots of these bits are not implemented. */ /* This may enable/disable the MMU, so do a TLB flush. */ -- 2.7.4 Now that we enforce both: * pmsav7_dregion == 0 implies has_mpu == false * PMSA with has_mpu == false means SCTLR.M cannot be set we can remove a check on pmsav7_dregion from get_phys_addr_pmsav7(), because we can only reach this code path if the MPU is enabled (and so region_translation_disabled() returned false). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-8-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (n == -1) { /* no hits */ - if (cpu->pmsav7_dregion && - (is_user || !(regime_sctlr(env, mmu_idx) & SCTLR_BR))) { + if (is_user || !(regime_sctlr(env, mmu_idx) & SCTLR_BR)) { /* background fault */ *fsr = 0; return true; -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> Improve the "-d mmu" tracing for the PMSAv7 MPU translation process as an aid in debugging guest MPU configurations: * fix a missing newline for a guest-error log * report the region number with guest-error or unimp logs of bad region register values * add a log message for the overall result of the lookup * print "0x" prefix for hex values Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-9-git-send-email-peter.maydell@linaro.org [PMM: a little tidyup, report region number in all messages rather than just one] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (!rsize) { - qemu_log_mask(LOG_GUEST_ERROR, "DRSR.Rsize field can not be 0"); + qemu_log_mask(LOG_GUEST_ERROR, + "DRSR[%d]: Rsize field cannot be 0\n", n); continue; } rsize++; rmask = (1ull << rsize) - 1; if (base & rmask) { - qemu_log_mask(LOG_GUEST_ERROR, "DRBAR %" PRIx32 " misaligned " - "to DRSR region size, mask = %" PRIx32, - base, rmask); + qemu_log_mask(LOG_GUEST_ERROR, + "DRBAR[%d]: 0x%" PRIx32 " misaligned " + "to DRSR region size, mask = 0x%" PRIx32 "\n", + n, base, rmask); continue; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } } if (rsize < TARGET_PAGE_BITS) { - qemu_log_mask(LOG_UNIMP, "No support for MPU (sub)region" + qemu_log_mask(LOG_UNIMP, + "DRSR[%d]: No support for MPU (sub)region " "alignment of %" PRIu32 " bits. Minimum is %d\n", - rsize, TARGET_PAGE_BITS); + n, rsize, TARGET_PAGE_BITS); continue; } if (srdis) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, break; default: qemu_log_mask(LOG_GUEST_ERROR, - "Bad value for AP bits in DRACR %" - PRIx32 "\n", ap); + "DRACR[%d]: Bad value for AP bits: 0x%" + PRIx32 "\n", n, ap); } } else { /* Priv. mode AP bits decoding */ switch (ap) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, break; default: qemu_log_mask(LOG_GUEST_ERROR, - "Bad value for AP bits in DRACR %" - PRIx32 "\n", ap); + "DRACR[%d]: Bad value for AP bits: 0x%" + PRIx32 "\n", n, ap); } } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, */ if (arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7)) { + bool ret; *page_size = TARGET_PAGE_SIZE; - return get_phys_addr_pmsav7(env, address, access_type, mmu_idx, - phys_ptr, prot, fsr); + ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx, + phys_ptr, prot, fsr); + qemu_log_mask(CPU_LOG_MMU, "PMSAv7 MPU lookup for %s at 0x%08" PRIx32 + " mmu_idx %u -> %s (prot %c%c%c)\n", + access_type == 1 ? "reading" : + (access_type == 2 ? "writing" : "execute"), + (uint32_t)address, mmu_idx, + ret ? "Miss" : "Hit", + *prot & PAGE_READ ? 'r' : '-', + *prot & PAGE_WRITE ? 'w' : '-', + *prot & PAGE_EXEC ? 'x' : '-'); + + return ret; } if (regime_translation_disabled(env, mmu_idx)) { -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> Add support for the M profile default memory map which is used if the MPU is not present or disabled. The main differences in behaviour from implementing this correctly are that we set the PAGE_EXEC attribute on the right regions of memory, such that device regions are not executable. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Message-id: 1493122030-32191-10-git-send-email-peter.maydell@linaro.org [PMM: rephrased comment and commit message; don't mark the flash memory region as not-writable; list all the cases in the default map explicitly rather than using a 'default' case for the non-executable regions] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 41 ++++++++++++++++++++++++++++++++--------- 1 file changed, 32 insertions(+), 9 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline void get_phys_addr_pmsav7_default(CPUARMState *env, ARMMMUIdx mmu_idx, int32_t address, int *prot) { - *prot = PAGE_READ | PAGE_WRITE; - switch (address) { - case 0xF0000000 ... 0xFFFFFFFF: - if (regime_sctlr(env, mmu_idx) & SCTLR_V) { /* hivecs execing is ok */ + if (!arm_feature(env, ARM_FEATURE_M)) { + *prot = PAGE_READ | PAGE_WRITE; + switch (address) { + case 0xF0000000 ... 0xFFFFFFFF: + if (regime_sctlr(env, mmu_idx) & SCTLR_V) { + /* hivecs execing is ok */ + *prot |= PAGE_EXEC; + } + break; + case 0x00000000 ... 0x7FFFFFFF: *prot |= PAGE_EXEC; + break; + } + } else { + /* Default system address map for M profile cores. + * The architecture specifies which regions are execute-never; + * at the MPU level no other checks are defined. + */ + switch (address) { + case 0x00000000 ... 0x1fffffff: /* ROM */ + case 0x20000000 ... 0x3fffffff: /* SRAM */ + case 0x60000000 ... 0x7fffffff: /* RAM */ + case 0x80000000 ... 0x9fffffff: /* RAM */ + *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; + break; + case 0x40000000 ... 0x5fffffff: /* Peripheral */ + case 0xa0000000 ... 0xbfffffff: /* Device */ + case 0xc0000000 ... 0xdfffffff: /* Device */ + case 0xe0000000 ... 0xffffffff: /* System */ + *prot = PAGE_READ | PAGE_WRITE; + break; + default: + g_assert_not_reached(); } - break; - case 0x00000000 ... 0x7FFFFFFF: - *prot |= PAGE_EXEC; - break; } - } static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, -- 2.7.4 All M profile CPUs are PMSA, so set the feature bit. (We haven't actually implemented the M profile MPU register interface yet, but setting this feature bit gives us closer to correct behaviour for the MPU-disabled case.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-11-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); + /* M profile implies PMSA. We have to do this here rather than + * in realize with the other feature-implication checks because + * we look at the PMSA bit to see if we should add some properties. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_M)) { + set_feature(&cpu->env, ARM_FEATURE_PMSA); + } + if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { qdev_property_add_static(DEVICE(obj), &arm_cpu_reset_cbar_property, -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> General logic is that operations stopped by the MPU are MemManage, and those which go through the MPU and are caught by the unassigned handle are BusFault. Distinguish these by looking at the exception.fsr values, and set the CFSR bits and (if appropriate) fill in the BFAR or MMFAR with the exception address. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Message-id: 1493122030-32191-12-git-send-email-peter.maydell@linaro.org [PMM: i-side faults do not set BFAR/MMFAR, only d-side; added some CPU_LOG_INT logging] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- target/arm/helper.c | 45 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 42 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* TODO: if we implemented the MPU registers, this is where we - * should set the MMFAR, etc from exception.fsr and exception.vaddress. + /* Note that for M profile we don't have a guest facing FSR, but + * the env->exception.fsr will be populated by the code that + * raises the fault, in the A profile short-descriptor format. */ - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM); + switch (env->exception.fsr & 0xf) { + case 0x8: /* External Abort */ + switch (cs->exception_index) { + case EXCP_PREFETCH_ABORT: + env->v7m.cfsr |= R_V7M_CFSR_PRECISERR_MASK; + qemu_log_mask(CPU_LOG_INT, "...with CFSR.PRECISERR\n"); + break; + case EXCP_DATA_ABORT: + env->v7m.cfsr |= + (R_V7M_CFSR_IBUSERR_MASK | R_V7M_CFSR_BFARVALID_MASK); + env->v7m.bfar = env->exception.vaddress; + qemu_log_mask(CPU_LOG_INT, + "...with CFSR.IBUSERR and BFAR 0x%x\n", + env->v7m.bfar); + break; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS); + break; + default: + /* All other FSR values are either MPU faults or "can't happen + * for M profile" cases. + */ + switch (cs->exception_index) { + case EXCP_PREFETCH_ABORT: + env->v7m.cfsr |= R_V7M_CFSR_IACCVIOL_MASK; + qemu_log_mask(CPU_LOG_INT, "...with CFSR.IACCVIOL\n"); + break; + case EXCP_DATA_ABORT: + env->v7m.cfsr |= + (R_V7M_CFSR_DACCVIOL_MASK | R_V7M_CFSR_MMARVALID_MASK); + env->v7m.mmfar = env->exception.vaddress; + qemu_log_mask(CPU_LOG_INT, + "...with CFSR.DACCVIOL and MMFAR 0x%x\n", + env->v7m.mmfar); + break; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM); + break; + } break; case EXCP_BKPT: if (semihosting_enabled()) { -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> The M series MPU is almost the same as the already implemented R profile MPU (v7 PMSA). So all we need to implement here is the MPU register interface in the system register space. This implementation has the same restriction as the R profile MPU that it doesn't permit regions to be sized down smaller than 1K. We also do not yet implement support for MPU_CTRL.HFNMIENA; this bit should if zero disable use of the MPU when running HardFault, NMI or with FAULTMASK set to 1 (ie at an execution priority of less than zero) -- if the MPU is enabled we don't treat these cases any differently. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Message-id: 1493122030-32191-13-git-send-email-peter.maydell@linaro.org [PMM: Keep all the bits in mpu_ctrl field, rather than using SCTLR bits for them; drop broken HFNMIENA support; various cleanup] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 6 +++ hw/intc/armv7m_nvic.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++ target/arm/helper.c | 25 +++++++++++- target/arm/machine.c | 5 ++- 4 files changed, 137 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t dfsr; /* Debug Fault Status Register */ uint32_t mmfar; /* MemManage Fault Address */ uint32_t bfar; /* BusFault Address */ + unsigned mpu_ctrl; /* MPU_CTRL (some bits kept in sctlr_el[1]) */ int exception; } v7m; @@ -XXX,XX +XXX,XX @@ FIELD(V7M_DFSR, DWTTRAP, 2, 1) FIELD(V7M_DFSR, VCATCH, 3, 1) FIELD(V7M_DFSR, EXTERNAL, 4, 1) +/* v7M MPU_CTRL bits */ +FIELD(V7M_MPU_CTRL, ENABLE, 0, 1) +FIELD(V7M_MPU_CTRL, HFNMIENA, 1, 1) +FIELD(V7M_MPU_CTRL, PRIVDEFENA, 2, 1) + /* If adding a feature bit which corresponds to a Linux ELF * HWCAP bit, remember to update the feature-bit-to-hwcap * mapping in linux-user/elfload.c:get_elf_hwcap(). diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" +#include "exec/exec-all.h" #include "qemu/log.h" #include "trace.h" @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) case 0xd70: /* ISAR4. */ return 0x01310102; /* TODO: Implement debug registers. */ + case 0xd90: /* MPU_TYPE */ + /* Unified MPU; if the MPU is not present this value is zero */ + return cpu->pmsav7_dregion << 8; + break; + case 0xd94: /* MPU_CTRL */ + return cpu->env.v7m.mpu_ctrl; + case 0xd98: /* MPU_RNR */ + return cpu->env.cp15.c6_rgnr; + case 0xd9c: /* MPU_RBAR */ + case 0xda4: /* MPU_RBAR_A1 */ + case 0xdac: /* MPU_RBAR_A2 */ + case 0xdb4: /* MPU_RBAR_A3 */ + { + int region = cpu->env.cp15.c6_rgnr; + + if (region >= cpu->pmsav7_dregion) { + return 0; + } + return (cpu->env.pmsav7.drbar[region] & 0x1f) | (region & 0xf); + } + case 0xda0: /* MPU_RASR */ + case 0xda8: /* MPU_RASR_A1 */ + case 0xdb0: /* MPU_RASR_A2 */ + case 0xdb8: /* MPU_RASR_A3 */ + { + int region = cpu->env.cp15.c6_rgnr; + + if (region >= cpu->pmsav7_dregion) { + return 0; + } + return ((cpu->env.pmsav7.dracr[region] & 0xffff) << 16) | + (cpu->env.pmsav7.drsr[region] & 0xffff); + } default: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); return 0; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) qemu_log_mask(LOG_UNIMP, "NVIC: Aux fault status registers unimplemented\n"); break; + case 0xd90: /* MPU_TYPE */ + return; /* RO */ + case 0xd94: /* MPU_CTRL */ + if ((value & + (R_V7M_MPU_CTRL_HFNMIENA_MASK | R_V7M_MPU_CTRL_ENABLE_MASK)) + == R_V7M_MPU_CTRL_HFNMIENA_MASK) { + qemu_log_mask(LOG_GUEST_ERROR, "MPU_CTRL: HFNMIENA and !ENABLE is " + "UNPREDICTABLE\n"); + } + cpu->env.v7m.mpu_ctrl = value & (R_V7M_MPU_CTRL_ENABLE_MASK | + R_V7M_MPU_CTRL_HFNMIENA_MASK | + R_V7M_MPU_CTRL_PRIVDEFENA_MASK); + tlb_flush(CPU(cpu)); + break; + case 0xd98: /* MPU_RNR */ + if (value >= cpu->pmsav7_dregion) { + qemu_log_mask(LOG_GUEST_ERROR, "MPU region out of range %" + PRIu32 "/%" PRIu32 "\n", + value, cpu->pmsav7_dregion); + } else { + cpu->env.cp15.c6_rgnr = value; + } + break; + case 0xd9c: /* MPU_RBAR */ + case 0xda4: /* MPU_RBAR_A1 */ + case 0xdac: /* MPU_RBAR_A2 */ + case 0xdb4: /* MPU_RBAR_A3 */ + { + int region; + + if (value & (1 << 4)) { + /* VALID bit means use the region number specified in this + * value and also update MPU_RNR.REGION with that value. + */ + region = extract32(value, 0, 4); + if (region >= cpu->pmsav7_dregion) { + qemu_log_mask(LOG_GUEST_ERROR, + "MPU region out of range %u/%" PRIu32 "\n", + region, cpu->pmsav7_dregion); + return; + } + cpu->env.cp15.c6_rgnr = region; + } else { + region = cpu->env.cp15.c6_rgnr; + } + + if (region >= cpu->pmsav7_dregion) { + return; + } + + cpu->env.pmsav7.drbar[region] = value & ~0x1f; + tlb_flush(CPU(cpu)); + break; + } + case 0xda0: /* MPU_RASR */ + case 0xda8: /* MPU_RASR_A1 */ + case 0xdb0: /* MPU_RASR_A2 */ + case 0xdb8: /* MPU_RASR_A3 */ + { + int region = cpu->env.cp15.c6_rgnr; + + if (region >= cpu->pmsav7_dregion) { + return; + } + + cpu->env.pmsav7.drsr[region] = value & 0xff3f; + cpu->env.pmsav7.dracr[region] = (value >> 16) & 0x173f; + tlb_flush(CPU(cpu)); + break; + } case 0xf00: /* Software Triggered Interrupt Register */ { /* user mode can only write to STIR if CCR.USERSETMPEND permits it */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t regime_sctlr(CPUARMState *env, ARMMMUIdx mmu_idx) static inline bool regime_translation_disabled(CPUARMState *env, ARMMMUIdx mmu_idx) { + if (arm_feature(env, ARM_FEATURE_M)) { + return !(env->v7m.mpu_ctrl & R_V7M_MPU_CTRL_ENABLE_MASK); + } + if (mmu_idx == ARMMMUIdx_S2NS) { return (env->cp15.hcr_el2 & HCR_VM) == 0; } @@ -XXX,XX +XXX,XX @@ static inline void get_phys_addr_pmsav7_default(CPUARMState *env, } } +static bool pmsav7_use_background_region(ARMCPU *cpu, + ARMMMUIdx mmu_idx, bool is_user) +{ + /* Return true if we should use the default memory map as a + * "background" region if there are no hits against any MPU regions. + */ + CPUARMState *env = &cpu->env; + + if (is_user) { + return false; + } + + if (arm_feature(env, ARM_FEATURE_M)) { + return env->v7m.mpu_ctrl & R_V7M_MPU_CTRL_PRIVDEFENA_MASK; + } else { + return regime_sctlr(env, mmu_idx) & SCTLR_BR; + } +} + static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, int access_type, ARMMMUIdx mmu_idx, hwaddr *phys_ptr, int *prot, uint32_t *fsr) @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (n == -1) { /* no hits */ - if (is_user || !(regime_sctlr(env, mmu_idx) & SCTLR_BR)) { + if (!pmsav7_use_background_region(cpu, mmu_idx, is_user)) { /* background fault */ *fsr = 0; return true; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static bool m_needed(void *opaque) static const VMStateDescription vmstate_m = { .name = "cpu/m", - .version_id = 3, - .minimum_version_id = 3, + .version_id = 4, + .minimum_version_id = 4, .needed = m_needed, .fields = (VMStateField[]) { VMSTATE_UINT32(env.v7m.vecbase, ARMCPU), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { VMSTATE_UINT32(env.v7m.dfsr, ARMCPU), VMSTATE_UINT32(env.v7m.mmfar, ARMCPU), VMSTATE_UINT32(env.v7m.bfar, ARMCPU), + VMSTATE_UINT32(env.v7m.mpu_ctrl, ARMCPU), VMSTATE_INT32(env.v7m.exception, ARMCPU), VMSTATE_END_OF_LIST() } -- 2.7.4 Implement HFNMIENA support for the M profile MPU. This bit controls whether the MPU is treated as enabled when executing at execution priorities of less than zero (in NMI, HardFault or with the FAULTMASK bit set). Doing this requires us to use a different MMU index for "running at execution priority < 0", because we will have different access permissions for that case versus the normal case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1493122030-32191-14-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 24 +++++++++++++++++++++++- target/arm/helper.c | 18 +++++++++++++++++- target/arm/translate.c | 1 + 3 files changed, 41 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * for the accesses done as part of a stage 1 page table walk, rather than * having to walk the stage 2 page table over and over.) * + * R profile CPUs have an MPU, but can use the same set of MMU indexes + * as A profile. They only need to distinguish NS EL0 and NS EL1 (and + * NS EL2 if we ever model a Cortex-R52). + * + * M profile CPUs are rather different as they do not have a true MMU. + * They have the following different MMU indexes: + * User + * Privileged + * Execution priority negative (this is like privileged, but the + * MPU HFNMIENA bit means that it may have different access permission + * check results to normal privileged code, so can't share a TLB). + * * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code * are not quite the same -- different CPU types (most notably M profile * vs A/R profile) would like to use MMU indexes with different semantics, @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdx { ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A, ARMMMUIdx_MUser = 0 | ARM_MMU_IDX_M, ARMMMUIdx_MPriv = 1 | ARM_MMU_IDX_M, + ARMMMUIdx_MNegPri = 2 | ARM_MMU_IDX_M, /* Indexes below here don't have TLBs and are used only for AT system * instructions or for the first stage of an S12 page table walk. */ @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { ARMMMUIdxBit_S2NS = 1 << 6, ARMMMUIdxBit_MUser = 1 << 0, ARMMMUIdxBit_MPriv = 1 << 1, + ARMMMUIdxBit_MNegPri = 1 << 2, } ARMMMUIdxBit; #define MMU_USER_IDX 0 @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) case ARM_MMU_IDX_A: return mmu_idx & 3; case ARM_MMU_IDX_M: - return mmu_idx & 1; + return mmu_idx == ARMMMUIdx_MUser ? 0 : 1; default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) if (arm_feature(env, ARM_FEATURE_M)) { ARMMMUIdx mmu_idx = el == 0 ? ARMMMUIdx_MUser : ARMMMUIdx_MPriv; + /* Execution priority is negative if FAULTMASK is set or + * we're in a HardFault or NMI handler. + */ + if ((env->v7m.exception > 0 && env->v7m.exception <= 3) + || env->daif & PSTATE_F) { + return arm_to_core_mmu_idx(ARMMMUIdx_MNegPri); + } + return arm_to_core_mmu_idx(mmu_idx); } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t regime_el(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1NSE0: case ARMMMUIdx_S1NSE1: case ARMMMUIdx_MPriv: + case ARMMMUIdx_MNegPri: case ARMMMUIdx_MUser: return 1; default: @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_secure(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1E2: case ARMMMUIdx_S2NS: case ARMMMUIdx_MPriv: + case ARMMMUIdx_MNegPri: case ARMMMUIdx_MUser: return false; case ARMMMUIdx_S1E3: @@ -XXX,XX +XXX,XX @@ static inline bool regime_translation_disabled(CPUARMState *env, ARMMMUIdx mmu_idx) { if (arm_feature(env, ARM_FEATURE_M)) { - return !(env->v7m.mpu_ctrl & R_V7M_MPU_CTRL_ENABLE_MASK); + switch (env->v7m.mpu_ctrl & + (R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK)) { + case R_V7M_MPU_CTRL_ENABLE_MASK: + /* Enabled, but not for HardFault and NMI */ + return mmu_idx == ARMMMUIdx_MNegPri; + case R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK: + /* Enabled for all cases */ + return false; + case 0: + default: + /* HFNMIENA set and ENABLE clear is UNPREDICTABLE, but + * we warned about that in armv7m_nvic.c when the guest set it. + */ + return true; + } } if (mmu_idx == ARMMMUIdx_S2NS) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline int get_a32_user_mem_index(DisasContext *s) return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0); case ARMMMUIdx_MUser: case ARMMMUIdx_MPriv: + case ARMMMUIdx_MNegPri: return arm_to_core_mmu_idx(ARMMMUIdx_MUser); case ARMMMUIdx_S2NS: default: -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Multiple I2C commands can be fired simultaneously and the controller execute the commands following these priorities: (1) Master Start Command (2) Master Transmit Command (3) Slave Transmit Command or Master Receive Command (4) Master Stop Command The current code is incorrect with respect to the above sequence and needs to be reworked to handle each individual command. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/aspeed_i2c.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { + bus->cmd &= ~0xFFFF; bus->cmd |= value & 0xFFFF; bus->intr_status = 0; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status |= I2CD_INTR_TX_ACK; } - } else if (bus->cmd & I2CD_M_TX_CMD) { + /* START command is also a TX command, as the slave address is + * sent on the bus */ + bus->cmd &= ~(I2CD_M_START_CMD | I2CD_M_TX_CMD); + + /* No slave found */ + if (!i2c_bus_busy(bus->bus)) { + return; + } + } + + if (bus->cmd & I2CD_M_TX_CMD) { if (i2c_send(bus->bus, bus->buf)) { bus->intr_status |= (I2CD_INTR_TX_NAK | I2CD_INTR_ABNORMAL); i2c_end_transfer(bus->bus); } else { bus->intr_status |= I2CD_INTR_TX_ACK; } + bus->cmd &= ~I2CD_M_TX_CMD; + } - } else if (bus->cmd & I2CD_M_RX_CMD) { + if (bus->cmd & I2CD_M_RX_CMD) { int ret = i2c_recv(bus->bus); if (ret < 0) { qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__); @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status |= I2CD_INTR_RX_DONE; } bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; + bus->cmd &= ~I2CD_M_RX_CMD; } if (bus->cmd & (I2CD_M_STOP_CMD | I2CD_M_S_RX_CMD_LAST)) { @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) i2c_end_transfer(bus->bus); bus->intr_status |= I2CD_INTR_NORMAL_STOP; } + bus->cmd &= ~I2CD_M_STOP_CMD; } - - /* command is handled, reset it and check for interrupts */ - bus->cmd &= ~0xFFFF; - aspeed_i2c_bus_raise_interrupt(bus); } static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, } aspeed_i2c_bus_handle_cmd(bus, value); + aspeed_i2c_bus_raise_interrupt(bus); break; default: -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Today, the LAST command is handled with the STOP command but this is incorrect. Also nack the I2C bus when a LAST is issued. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/aspeed_i2c.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->cmd &= ~I2CD_M_TX_CMD; } - if (bus->cmd & I2CD_M_RX_CMD) { + if (bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST)) { int ret = i2c_recv(bus->bus); if (ret < 0) { qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__); @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status |= I2CD_INTR_RX_DONE; } bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; - bus->cmd &= ~I2CD_M_RX_CMD; + if (bus->cmd & I2CD_M_S_RX_CMD_LAST) { + i2c_nack(bus->bus); + } + bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST); } - if (bus->cmd & (I2CD_M_STOP_CMD | I2CD_M_S_RX_CMD_LAST)) { + if (bus->cmd & I2CD_M_STOP_CMD) { if (!i2c_bus_busy(bus->bus)) { bus->intr_status |= I2CD_INTR_ABNORMAL; } else { -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> The Aspeed I2C controller maintains a state machine in the command register, which is mostly used for debug. Let's start adding a few states to handle abnormal STOP commands. Today, the model uses the busy status of the bus as a condition to do so but it is not precise enough. Also remove the ABNORMAL bit for failing TX commands. This is incorrect with respect to the specs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/aspeed_i2c.c | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, } } +static void aspeed_i2c_set_state(AspeedI2CBus *bus, uint8_t state) +{ + bus->cmd &= ~(I2CD_TX_STATE_MASK << I2CD_TX_STATE_SHIFT); + bus->cmd |= (state & I2CD_TX_STATE_MASK) << I2CD_TX_STATE_SHIFT; +} + +static uint8_t aspeed_i2c_get_state(AspeedI2CBus *bus) +{ + return (bus->cmd >> I2CD_TX_STATE_SHIFT) & I2CD_TX_STATE_MASK; +} + +/* + * The state machine needs some refinement. It is only used to track + * invalid STOP commands for the moment. + */ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { bus->cmd &= ~0xFFFF; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status = 0; if (bus->cmd & I2CD_M_START_CMD) { + uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ? + I2CD_MSTARTR : I2CD_MSTART; + + aspeed_i2c_set_state(bus, state); + if (i2c_start_transfer(bus->bus, extract32(bus->buf, 1, 7), extract32(bus->buf, 0, 1))) { bus->intr_status |= I2CD_INTR_TX_NAK; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) if (!i2c_bus_busy(bus->bus)) { return; } + aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if (bus->cmd & I2CD_M_TX_CMD) { + aspeed_i2c_set_state(bus, I2CD_MTXD); if (i2c_send(bus->bus, bus->buf)) { - bus->intr_status |= (I2CD_INTR_TX_NAK | I2CD_INTR_ABNORMAL); + bus->intr_status |= (I2CD_INTR_TX_NAK); i2c_end_transfer(bus->bus); } else { bus->intr_status |= I2CD_INTR_TX_ACK; } bus->cmd &= ~I2CD_M_TX_CMD; + aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if (bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST)) { - int ret = i2c_recv(bus->bus); + int ret; + + aspeed_i2c_set_state(bus, I2CD_MRXD); + ret = i2c_recv(bus->bus); if (ret < 0) { qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__); ret = 0xff; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) i2c_nack(bus->bus); } bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST); + aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if (bus->cmd & I2CD_M_STOP_CMD) { - if (!i2c_bus_busy(bus->bus)) { + if (!(aspeed_i2c_get_state(bus) & I2CD_MACTIVE)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: abnormal stop\n", __func__); bus->intr_status |= I2CD_INTR_ABNORMAL; } else { + aspeed_i2c_set_state(bus, I2CD_MSTOP); i2c_end_transfer(bus->bus); bus->intr_status |= I2CD_INTR_NORMAL_STOP; } bus->cmd &= ~I2CD_M_STOP_CMD; + aspeed_i2c_set_state(bus, I2CD_IDLE); } } -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Let's add an RTC to the palmetto BMC and a LM75 temperature sensor to the AST2500 EVB to start with. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-5-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ typedef struct AspeedBoardConfig { const char *fmc_model; const char *spi_model; uint32_t num_cs; + void (*i2c_init)(AspeedBoardState *bmc); } AspeedBoardConfig; enum { @@ -XXX,XX +XXX,XX @@ enum { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +static void palmetto_bmc_i2c_init(AspeedBoardState *bmc); +static void ast2500_evb_i2c_init(AspeedBoardState *bmc); + static const AspeedBoardConfig aspeed_boards[] = { [PALMETTO_BMC] = { .soc_name = "ast2400-a1", @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .fmc_model = "n25q256a", .spi_model = "mx25l25635e", .num_cs = 1, + .i2c_init = palmetto_bmc_i2c_init, }, [AST2500_EVB] = { .soc_name = "ast2500-a1", @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .fmc_model = "n25q256a", .spi_model = "mx25l25635e", .num_cs = 1, + .i2c_init = ast2500_evb_i2c_init, }, [ROMULUS_BMC] = { .soc_name = "ast2500-a1", @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, aspeed_board_binfo.ram_size = ram_size; aspeed_board_binfo.loader_start = sc->info->sdram_base; + if (cfg->i2c_init) { + cfg->i2c_init(bmc); + } + arm_load_kernel(ARM_CPU(first_cpu), &aspeed_board_binfo); } +static void palmetto_bmc_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + /* The palmetto platform expects a ds3231 RTC but a ds1338 is + * enough to provide basic RTC features. Alarms will be missing */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68); +} + static void palmetto_bmc_init(MachineState *machine) { aspeed_board_init(machine, &aspeed_boards[PALMETTO_BMC]); @@ -XXX,XX +XXX,XX @@ static const TypeInfo palmetto_bmc_type = { .class_init = palmetto_bmc_class_init, }; +static void ast2500_evb_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); +} + static void ast2500_evb_init(MachineState *machine) { aspeed_board_init(machine, &aspeed_boards[AST2500_EVB]); -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Largely inspired by the TMP105 temperature sensor, here is a model for the TMP42{1,2,3} temperature sensors. Specs can be found here : http://www.ti.com/lit/gpn/tmp421 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-6-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + hw/misc/tmp421.c | 401 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 3 files changed, 403 insertions(+) create mode 100644 hw/misc/tmp421.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_APPLESMC) += applesmc.o common-obj-$(CONFIG_MAX111X) += max111x.o common-obj-$(CONFIG_TMP105) += tmp105.o +common-obj-$(CONFIG_TMP421) += tmp421.o common-obj-$(CONFIG_ISA_DEBUG) += debugexit.o common-obj-$(CONFIG_SGA) += sga.o common-obj-$(CONFIG_ISA_TESTDEV) += pc-testdev.o diff --git a/hw/misc/tmp421.c b/hw/misc/tmp421.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/tmp421.c @@ -XXX,XX +XXX,XX @@ +/* + * Texas Instruments TMP421 temperature sensor. + * + * Copyright (c) 2016 IBM Corporation. + * + * Largely inspired by : + * + * Texas Instruments TMP105 temperature sensor. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski <andrew@openedhand.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "hw/hw.h" +#include "hw/i2c/i2c.h" +#include "qapi/error.h" +#include "qapi/visitor.h" + +/* Manufacturer / Device ID's */ +#define TMP421_MANUFACTURER_ID 0x55 +#define TMP421_DEVICE_ID 0x21 +#define TMP422_DEVICE_ID 0x22 +#define TMP423_DEVICE_ID 0x23 + +typedef struct DeviceInfo { + int model; + const char *name; +} DeviceInfo; + +static const DeviceInfo devices[] = { + { TMP421_DEVICE_ID, "tmp421" }, + { TMP422_DEVICE_ID, "tmp422" }, + { TMP423_DEVICE_ID, "tmp423" }, +}; + +typedef struct TMP421State { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + + int16_t temperature[4]; + + uint8_t status; + uint8_t config[2]; + uint8_t rate; + + uint8_t len; + uint8_t buf[2]; + uint8_t pointer; + +} TMP421State; + +typedef struct TMP421Class { + I2CSlaveClass parent_class; + DeviceInfo *dev; +} TMP421Class; + +#define TYPE_TMP421 "tmp421-generic" +#define TMP421(obj) OBJECT_CHECK(TMP421State, (obj), TYPE_TMP421) + +#define TMP421_CLASS(klass) \ + OBJECT_CLASS_CHECK(TMP421Class, (klass), TYPE_TMP421) +#define TMP421_GET_CLASS(obj) \ + OBJECT_GET_CLASS(TMP421Class, (obj), TYPE_TMP421) + +/* the TMP421 registers */ +#define TMP421_STATUS_REG 0x08 +#define TMP421_STATUS_BUSY (1 << 7) +#define TMP421_CONFIG_REG_1 0x09 +#define TMP421_CONFIG_RANGE (1 << 2) +#define TMP421_CONFIG_SHUTDOWN (1 << 6) +#define TMP421_CONFIG_REG_2 0x0A +#define TMP421_CONFIG_RC (1 << 2) +#define TMP421_CONFIG_LEN (1 << 3) +#define TMP421_CONFIG_REN (1 << 4) +#define TMP421_CONFIG_REN2 (1 << 5) +#define TMP421_CONFIG_REN3 (1 << 6) + +#define TMP421_CONVERSION_RATE_REG 0x0B +#define TMP421_ONE_SHOT 0x0F + +#define TMP421_RESET 0xFC +#define TMP421_MANUFACTURER_ID_REG 0xFE +#define TMP421_DEVICE_ID_REG 0xFF + +#define TMP421_TEMP_MSB0 0x00 +#define TMP421_TEMP_MSB1 0x01 +#define TMP421_TEMP_MSB2 0x02 +#define TMP421_TEMP_MSB3 0x03 +#define TMP421_TEMP_LSB0 0x10 +#define TMP421_TEMP_LSB1 0x11 +#define TMP421_TEMP_LSB2 0x12 +#define TMP421_TEMP_LSB3 0x13 + +static const int32_t mins[2] = { -40000, -55000 }; +static const int32_t maxs[2] = { 127000, 150000 }; + +static void tmp421_get_temperature(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + TMP421State *s = TMP421(obj); + bool ext_range = (s->config[0] & TMP421_CONFIG_RANGE); + int offset = ext_range * 64 * 256; + int64_t value; + int tempid; + + if (sscanf(name, "temperature%d", &tempid) != 1) { + error_setg(errp, "error reading %s: %m", name); + return; + } + + if (tempid >= 4 || tempid < 0) { + error_setg(errp, "error reading %s", name); + return; + } + + value = ((s->temperature[tempid] - offset) * 1000 + 128) / 256; + + visit_type_int(v, name, &value, errp); +} + +/* Units are 0.001 centigrades relative to 0 C. s->temperature is 8.8 + * fixed point, so units are 1/256 centigrades. A simple ratio will do. + */ +static void tmp421_set_temperature(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + TMP421State *s = TMP421(obj); + Error *local_err = NULL; + int64_t temp; + bool ext_range = (s->config[0] & TMP421_CONFIG_RANGE); + int offset = ext_range * 64 * 256; + int tempid; + + visit_type_int(v, name, &temp, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + + if (temp >= maxs[ext_range] || temp < mins[ext_range]) { + error_setg(errp, "value %" PRId64 ".%03" PRIu64 " °C is out of range", + temp / 1000, temp % 1000); + return; + } + + if (sscanf(name, "temperature%d", &tempid) != 1) { + error_setg(errp, "error reading %s: %m", name); + return; + } + + if (tempid >= 4 || tempid < 0) { + error_setg(errp, "error reading %s", name); + return; + } + + s->temperature[tempid] = (int16_t) ((temp * 256 - 128) / 1000) + offset; +} + +static void tmp421_read(TMP421State *s) +{ + TMP421Class *sc = TMP421_GET_CLASS(s); + + s->len = 0; + + switch (s->pointer) { + case TMP421_MANUFACTURER_ID_REG: + s->buf[s->len++] = TMP421_MANUFACTURER_ID; + break; + case TMP421_DEVICE_ID_REG: + s->buf[s->len++] = sc->dev->model; + break; + case TMP421_CONFIG_REG_1: + s->buf[s->len++] = s->config[0]; + break; + case TMP421_CONFIG_REG_2: + s->buf[s->len++] = s->config[1]; + break; + case TMP421_CONVERSION_RATE_REG: + s->buf[s->len++] = s->rate; + break; + case TMP421_STATUS_REG: + s->buf[s->len++] = s->status; + break; + + /* FIXME: check for channel enablement in config registers */ + case TMP421_TEMP_MSB0: + s->buf[s->len++] = (((uint16_t) s->temperature[0]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[0]) >> 0) & 0xf0; + break; + case TMP421_TEMP_MSB1: + s->buf[s->len++] = (((uint16_t) s->temperature[1]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[1]) >> 0) & 0xf0; + break; + case TMP421_TEMP_MSB2: + s->buf[s->len++] = (((uint16_t) s->temperature[2]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[2]) >> 0) & 0xf0; + break; + case TMP421_TEMP_MSB3: + s->buf[s->len++] = (((uint16_t) s->temperature[3]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[3]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB0: + s->buf[s->len++] = (((uint16_t) s->temperature[0]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB1: + s->buf[s->len++] = (((uint16_t) s->temperature[1]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB2: + s->buf[s->len++] = (((uint16_t) s->temperature[2]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB3: + s->buf[s->len++] = (((uint16_t) s->temperature[3]) >> 0) & 0xf0; + break; + } +} + +static void tmp421_reset(I2CSlave *i2c); + +static void tmp421_write(TMP421State *s) +{ + switch (s->pointer) { + case TMP421_CONVERSION_RATE_REG: + s->rate = s->buf[0]; + break; + case TMP421_CONFIG_REG_1: + s->config[0] = s->buf[0]; + break; + case TMP421_CONFIG_REG_2: + s->config[1] = s->buf[0]; + break; + case TMP421_RESET: + tmp421_reset(I2C_SLAVE(s)); + break; + } +} + +static int tmp421_rx(I2CSlave *i2c) +{ + TMP421State *s = TMP421(i2c); + + if (s->len < 2) { + return s->buf[s->len++]; + } else { + return 0xff; + } +} + +static int tmp421_tx(I2CSlave *i2c, uint8_t data) +{ + TMP421State *s = TMP421(i2c); + + if (s->len == 0) { + /* first byte is the register pointer for a read or write + * operation */ + s->pointer = data; + s->len++; + } else if (s->len == 1) { + /* second byte is the data to write. The device only supports + * one byte writes */ + s->buf[0] = data; + tmp421_write(s); + } + + return 0; +} + +static int tmp421_event(I2CSlave *i2c, enum i2c_event event) +{ + TMP421State *s = TMP421(i2c); + + if (event == I2C_START_RECV) { + tmp421_read(s); + } + + s->len = 0; + return 0; +} + +static const VMStateDescription vmstate_tmp421 = { + .name = "TMP421", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(len, TMP421State), + VMSTATE_UINT8_ARRAY(buf, TMP421State, 2), + VMSTATE_UINT8(pointer, TMP421State), + VMSTATE_UINT8_ARRAY(config, TMP421State, 2), + VMSTATE_UINT8(status, TMP421State), + VMSTATE_UINT8(rate, TMP421State), + VMSTATE_INT16_ARRAY(temperature, TMP421State, 4), + VMSTATE_I2C_SLAVE(i2c, TMP421State), + VMSTATE_END_OF_LIST() + } +}; + +static void tmp421_reset(I2CSlave *i2c) +{ + TMP421State *s = TMP421(i2c); + TMP421Class *sc = TMP421_GET_CLASS(s); + + memset(s->temperature, 0, sizeof(s->temperature)); + s->pointer = 0; + + s->config[0] = 0; /* TMP421_CONFIG_RANGE */ + + /* resistance correction and channel enablement */ + switch (sc->dev->model) { + case TMP421_DEVICE_ID: + s->config[1] = 0x1c; + break; + case TMP422_DEVICE_ID: + s->config[1] = 0x3c; + break; + case TMP423_DEVICE_ID: + s->config[1] = 0x7c; + break; + } + + s->rate = 0x7; /* 8Hz */ + s->status = 0; +} + +static int tmp421_init(I2CSlave *i2c) +{ + TMP421State *s = TMP421(i2c); + + tmp421_reset(&s->i2c); + + return 0; +} + +static void tmp421_initfn(Object *obj) +{ + object_property_add(obj, "temperature0", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); + object_property_add(obj, "temperature1", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); + object_property_add(obj, "temperature2", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); + object_property_add(obj, "temperature3", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); +} + +static void tmp421_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + TMP421Class *sc = TMP421_CLASS(klass); + + k->init = tmp421_init; + k->event = tmp421_event; + k->recv = tmp421_rx; + k->send = tmp421_tx; + dc->vmsd = &vmstate_tmp421; + sc->dev = (DeviceInfo *) data; +} + +static const TypeInfo tmp421_info = { + .name = TYPE_TMP421, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(TMP421State), + .instance_init = tmp421_initfn, + .class_init = tmp421_class_init, +}; + +static void tmp421_register_types(void) +{ + int i; + + type_register_static(&tmp421_info); + for (i = 0; i < ARRAY_SIZE(devices); ++i) { + TypeInfo ti = { + .name = devices[i].name, + .parent = TYPE_TMP421, + .class_init = tmp421_class_init, + .class_data = (void *) &devices[i], + }; + type_register(&ti); + } +} + +type_init(tmp421_register_types) diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_TWL92230=y CONFIG_TSC2005=y CONFIG_LM832X=y CONFIG_TMP105=y +CONFIG_TMP421=y CONFIG_STELLARIS=y CONFIG_STELLARIS_INPUT=y CONFIG_STELLARIS_ENET=y -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Temperatures can be changed from the monitor with : (qemu) qom-set /machine/unattached/device[2] temperature0 12000 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-7-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, static void palmetto_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; + DeviceState *dev; /* The palmetto platform expects a ds3231 RTC but a ds1338 is * enough to provide basic RTC features. Alarms will be missing */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68); + + /* add a TMP423 temperature sensor */ + dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2), + "tmp423", 0x4c); + object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort); + object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort); + object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort); + object_property_set_int(OBJECT(dev), 110000, "temperature3", &error_abort); } static void palmetto_bmc_init(MachineState *machine) -- 2.7.4 From: Andrew Jones <drjones@redhat.com> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 20170529173751.3443-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) if (nb_numa_nodes > 0) { acpi_add_table(table_offsets, tables_blob); build_srat(tables_blob, tables->linker, vms); + if (have_numa_distance) { + acpi_add_table(table_offsets, tables_blob); + build_slit(tables_blob, tables->linker); + } } if (its_class_name() && !vmc->no_its) { -- 2.7.4 From: Andrew Jones <drjones@redhat.com> This is based on patch Shannon Zhao originally posted. Cc: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 20170529173751.3443-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(VirtMachineState *vms) "clk24mhz"); qemu_fdt_setprop_cell(fdt, "/apb-pclk", "phandle", vms->clock_phandle); + if (have_numa_distance) { + int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t); + uint32_t *matrix = g_malloc0(size); + int idx, i, j; + + for (i = 0; i < nb_numa_nodes; i++) { + for (j = 0; j < nb_numa_nodes; j++) { + idx = (i * nb_numa_nodes + j) * 3; + matrix[idx + 0] = cpu_to_be32(i); + matrix[idx + 1] = cpu_to_be32(j); + matrix[idx + 2] = cpu_to_be32(numa_info[i].distance[j]); + } + } + + qemu_fdt_add_subnode(fdt, "/distance-map"); + qemu_fdt_setprop_string(fdt, "/distance-map", "compatible", + "numa-distance-map-v1"); + qemu_fdt_setprop(fdt, "/distance-map", "distance-matrix", + matrix, size); + g_free(matrix); + } } static void fdt_add_psci_node(const VirtMachineState *vms) -- 2.7.4 The following changes since commit 3db29dcac23da85486704ef9e7a8e7217f7829cd: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-01-12 13:51:36 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230113 for you to fetch changes up to 08899b5c68a55a3780d707e2464073c8f2670d31: target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled (2023-01-13 13:19:36 +0000) ---------------------------------------------------------------- target-arm queue: hw/arm/stm32f405: correctly describe the memory layout hw/arm: Add Olimex H405 board cubieboard: Support booting from an SD card image with u-boot on it target/arm: Fix sve_probe_page target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled various code cleanups ---------------------------------------------------------------- Evgeny Iakovlev (1): target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled Felipe Balbi (2): hw/arm/stm32f405: correctly describe the memory layout hw/arm: Add Olimex H405 Philippe Mathieu-Daudé (27): hw/arm/pxa2xx: Simplify pxa255_init() hw/arm/pxa2xx: Simplify pxa270_init() hw/arm/collie: Use the IEC binary prefix definitions hw/arm/collie: Simplify flash creation using for() loop hw/arm/gumstix: Improve documentation hw/arm/gumstix: Use the IEC binary prefix definitions hw/arm/mainstone: Use the IEC binary prefix definitions hw/arm/musicpal: Use the IEC binary prefix definitions hw/arm/omap_sx1: Remove unused 'total_ram' definitions hw/arm/omap_sx1: Use the IEC binary prefix definitions hw/arm/z2: Use the IEC binary prefix definitions hw/arm/vexpress: Remove dead code in vexpress_common_init() hw/arm: Remove unreachable code calling pflash_cfi01_register() hw/arm/pxa: Avoid forward-declaring PXA2xxI2CState hw/gpio/omap_gpio: Add local variable to avoid embedded cast hw/arm/omap: Drop useless casts from void * to pointer hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP1_GPIO type name hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP2_GPIO type name hw/intc/omap_intc: Use CamelCase for TYPE_OMAP_INTC type name hw/arm/stellaris: Drop useless casts from void * to pointer hw/arm/stellaris: Use CamelCase for STELLARIS_ADC type name hw/arm/bcm2836: Remove definitions generated by OBJECT_DECLARE_TYPE() hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() hw/misc/sbsa_ec: Rename TYPE_SBSA_EC -> TYPE_SBSA_SECURE_EC hw/misc/sbsa_ec: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() hw/intc/xilinx_intc: Use 'XpsIntc' typedef instead of 'struct xlx_pic' hw/timer/xilinx_timer: Use XpsTimerState instead of 'struct timerblock' Richard Henderson (1): target/arm: Fix sve_probe_page Strahinja Jankovic (7): hw/misc: Allwinner-A10 Clock Controller Module Emulation hw/misc: Allwinner A10 DRAM Controller Emulation {hw/i2c,docs/system/arm}: Allwinner TWI/I2C Emulation hw/misc: AXP209 PMU Emulation hw/arm: Add AXP209 to Cubieboard hw/arm: Allwinner A10 enable SPL load from MMC tests/avocado: Add SD boot test to Cubieboard docs/system/arm/cubieboard.rst | 1 + docs/system/arm/orangepi.rst | 1 + docs/system/arm/stm32.rst | 1 + configs/devices/arm-softmmu/default.mak | 1 + include/hw/adc/npcm7xx_adc.h | 7 +- include/hw/arm/allwinner-a10.h | 27 ++ include/hw/arm/allwinner-h3.h | 3 + include/hw/arm/npcm7xx.h | 18 +- include/hw/arm/omap.h | 24 +- include/hw/arm/pxa.h | 11 +- include/hw/arm/stm32f405_soc.h | 5 +- include/hw/i2c/allwinner-i2c.h | 55 ++++ include/hw/i2c/npcm7xx_smbus.h | 7 +- include/hw/misc/allwinner-a10-ccm.h | 67 +++++ include/hw/misc/allwinner-a10-dramc.h | 68 +++++ include/hw/misc/npcm7xx_clk.h | 2 +- include/hw/misc/npcm7xx_gcr.h | 6 +- include/hw/misc/npcm7xx_mft.h | 7 +- include/hw/misc/npcm7xx_pwm.h | 3 +- include/hw/misc/npcm7xx_rng.h | 6 +- include/hw/net/npcm7xx_emc.h | 5 +- include/hw/sd/npcm7xx_sdhci.h | 4 +- hw/arm/allwinner-a10.c | 40 +++ hw/arm/allwinner-h3.c | 11 +- hw/arm/bcm2836.c | 9 +- hw/arm/collie.c | 25 +- hw/arm/cubieboard.c | 11 + hw/arm/gumstix.c | 45 ++-- hw/arm/mainstone.c | 37 ++- hw/arm/musicpal.c | 9 +- hw/arm/olimex-stm32-h405.c | 69 +++++ hw/arm/omap1.c | 115 ++++---- hw/arm/omap2.c | 40 ++- hw/arm/omap_sx1.c | 53 ++-- hw/arm/palm.c | 2 +- hw/arm/pxa2xx.c | 8 +- hw/arm/spitz.c | 6 +- hw/arm/stellaris.c | 73 +++-- hw/arm/stm32f405_soc.c | 8 + hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 6 +- hw/arm/vexpress.c | 10 +- hw/arm/z2.c | 16 +- hw/char/omap_uart.c | 7 +- hw/display/omap_dss.c | 15 +- hw/display/omap_lcdc.c | 9 +- hw/dma/omap_dma.c | 15 +- hw/gpio/omap_gpio.c | 48 ++-- hw/i2c/allwinner-i2c.c | 459 ++++++++++++++++++++++++++++++++ hw/intc/omap_intc.c | 38 +-- hw/intc/xilinx_intc.c | 28 +- hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++++ hw/misc/allwinner-a10-dramc.c | 179 +++++++++++++ hw/misc/axp209.c | 238 +++++++++++++++++ hw/misc/omap_gpmc.c | 12 +- hw/misc/omap_l4.c | 7 +- hw/misc/omap_sdrc.c | 7 +- hw/misc/omap_tap.c | 5 +- hw/misc/sbsa_ec.c | 12 +- hw/sd/omap_mmc.c | 9 +- hw/ssi/omap_spi.c | 7 +- hw/timer/omap_gptimer.c | 22 +- hw/timer/omap_synctimer.c | 4 +- hw/timer/xilinx_timer.c | 27 +- target/arm/helper.c | 3 + target/arm/sve_helper.c | 14 +- MAINTAINERS | 8 + hw/arm/Kconfig | 9 + hw/arm/meson.build | 1 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 5 + hw/misc/Kconfig | 10 + hw/misc/meson.build | 3 + hw/misc/trace-events | 5 + tests/avocado/boot_linux_console.py | 47 ++++ 76 files changed, 1951 insertions(+), 455 deletions(-) create mode 100644 include/hw/i2c/allwinner-i2c.h create mode 100644 include/hw/misc/allwinner-a10-ccm.h create mode 100644 include/hw/misc/allwinner-a10-dramc.h create mode 100644 hw/arm/olimex-stm32-h405.c create mode 100644 hw/i2c/allwinner-i2c.c create mode 100644 hw/misc/allwinner-a10-ccm.c create mode 100644 hw/misc/allwinner-a10-dramc.c create mode 100644 hw/misc/axp209.c From: Felipe Balbi <balbi@kernel.org> STM32F405 has 128K of SRAM and another 64K of CCM (Core-coupled Memory) at a different base address. Correctly describe the memory layout to give existing FW images a chance to run unmodified. Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Message-id: 20221230145733.200496-2-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/stm32f405_soc.h | 5 ++++- hw/arm/stm32f405_soc.c | 8 ++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/stm32f405_soc.h b/include/hw/arm/stm32f405_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32f405_soc.h +++ b/include/hw/arm/stm32f405_soc.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(STM32F405State, STM32F405_SOC) #define FLASH_BASE_ADDRESS 0x08000000 #define FLASH_SIZE (1024 * 1024) #define SRAM_BASE_ADDRESS 0x20000000 -#define SRAM_SIZE (192 * 1024) +#define SRAM_SIZE (128 * 1024) +#define CCM_BASE_ADDRESS 0x10000000 +#define CCM_SIZE (64 * 1024) struct STM32F405State { /*< private >*/ @@ -XXX,XX +XXX,XX @@ struct STM32F405State { STM32F2XXADCState adc[STM_NUM_ADCS]; STM32F2XXSPIState spi[STM_NUM_SPIS]; + MemoryRegion ccm; MemoryRegion sram; MemoryRegion flash; MemoryRegion flash_alias; diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f405_soc_realize(DeviceState *dev_soc, Error **errp) } memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, &s->sram); + memory_region_init_ram(&s->ccm, NULL, "STM32F405.ccm", CCM_SIZE, + &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(system_memory, CCM_BASE_ADDRESS, &s->ccm); + armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 96); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); -- 2.34.1 From: Felipe Balbi <balbi@kernel.org> Olimex makes a series of low-cost STM32 boards. This commit introduces the minimum setup to support SMT32-H405. See [1] for details [1] https://www.olimex.com/Products/ARM/ST/STM32-H405/ Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20221230145733.200496-3-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/stm32.rst | 1 + configs/devices/arm-softmmu/default.mak | 1 + hw/arm/olimex-stm32-h405.c | 69 +++++++++++++++++++++++++ MAINTAINERS | 6 +++ hw/arm/Kconfig | 4 ++ hw/arm/meson.build | 1 + 6 files changed, 82 insertions(+) create mode 100644 hw/arm/olimex-stm32-h405.c diff --git a/docs/system/arm/stm32.rst b/docs/system/arm/stm32.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/stm32.rst +++ b/docs/system/arm/stm32.rst @@ -XXX,XX +XXX,XX @@ The STM32F4 series is based on ARM Cortex-M4F core. This series is pin-to-pin compatible with STM32F2 series. The following machines are based on this chip : - ``netduinoplus2`` Netduino Plus 2 board with STM32F405RGT6 microcontroller +- ``olimex-stm32-h405`` Olimex STM32 H405 board with STM32F405RGT6 microcontroller There are many other STM32 series that are currently not supported by QEMU. diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/arm-softmmu/default.mak +++ b/configs/devices/arm-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_COLLIE=y CONFIG_ASPEED_SOC=y CONFIG_NETDUINO2=y CONFIG_NETDUINOPLUS2=y +CONFIG_OLIMEX_STM32_H405=y CONFIG_MPS2=y CONFIG_RASPI=y CONFIG_DIGIC=y diff --git a/hw/arm/olimex-stm32-h405.c b/hw/arm/olimex-stm32-h405.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/olimex-stm32-h405.c @@ -XXX,XX +XXX,XX @@ +/* + * ST STM32VLDISCOVERY machine + * Olimex STM32-H405 machine + * + * Copyright (c) 2022 Felipe Balbi <balbi@kernel.org> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/boards.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-clock.h" +#include "qemu/error-report.h" +#include "hw/arm/stm32f405_soc.h" +#include "hw/arm/boot.h" + +/* olimex-stm32-h405 implementation is derived from netduinoplus2 */ + +/* Main SYSCLK frequency in Hz (168MHz) */ +#define SYSCLK_FRQ 168000000ULL + +static void olimex_stm32_h405_init(MachineState *machine) +{ + DeviceState *dev; + Clock *sysclk; + + /* This clock doesn't need migration because it is fixed-frequency */ + sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(sysclk, SYSCLK_FRQ); + + dev = qdev_new(TYPE_STM32F405_SOC); + qdev_prop_set_string(dev, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m4")); + qdev_connect_clock_in(dev, "sysclk", sysclk); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + + armv7m_load_kernel(ARM_CPU(first_cpu), + machine->kernel_filename, + 0, FLASH_SIZE); +} + +static void olimex_stm32_h405_machine_init(MachineClass *mc) +{ + mc->desc = "Olimex STM32-H405 (Cortex-M4)"; + mc->init = olimex_stm32_h405_init; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4"); + + /* SRAM pre-allocated as part of the SoC instantiation */ + mc->default_ram_size = 0; +} + +DEFINE_MACHINE("olimex-stm32-h405", olimex_stm32_h405_machine_init) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Maintained F: hw/arm/netduinoplus2.c +Olimex STM32 H405 +M: Felipe Balbi <balbi@kernel.org> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/olimex-stm32-h405.c + SmartFusion2 M: Subbaraya Sundeep <sundeep.lkml@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config NETDUINOPLUS2 bool select STM32F405_SOC +config OLIMEX_STM32_H405 + bool + select STM32F405_SOC + config NSERIES bool select OMAP diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c')) arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINO2', if_true: files('netduino2.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) +arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c')) arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c')) arm_ss.add(when: 'CONFIG_SX1', if_true: files('omap_sx1.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> During SPL boot several Clock Controller Module (CCM) registers are read, most important are PLL and Tuning, as well as divisor registers. This patch adds these registers and initializes reset values from user's guide. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 2 + include/hw/misc/allwinner-a10-ccm.h | 67 +++++++++ hw/arm/allwinner-a10.c | 7 + hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + 7 files changed, 305 insertions(+) create mode 100644 include/hw/misc/allwinner-a10-ccm.h create mode 100644 hw/misc/allwinner-a10-ccm.c diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ohci.h" #include "hw/usb/hcd-ehci.h" #include "hw/rtc/allwinner-rtc.h" +#include "hw/misc/allwinner-a10-ccm.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { /*< public >*/ ARMCPU cpu; + AwA10ClockCtlState ccm; AwA10PITState timer; AwA10PICState intc; AwEmacState emac; diff --git a/include/hw/misc/allwinner-a10-ccm.h b/include/hw/misc/allwinner-a10-ccm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-a10-ccm.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 Clock Control Module emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 CCU, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_A10_CCM_H +#define HW_MISC_ALLWINNER_A10_CCM_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by CCM device */ +#define AW_A10_CCM_IOSIZE (0x400) + +/** Total number of known registers */ +#define AW_A10_CCM_REGS_NUM (AW_A10_CCM_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_A10_CCM "allwinner-a10-ccm" +OBJECT_DECLARE_SIMPLE_TYPE(AwA10ClockCtlState, AW_A10_CCM) + +/** @} */ + +/** + * Allwinner A10 CCM object instance state. + */ +struct AwA10ClockCtlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_A10_CCM_REGS_NUM]; +}; + +#endif /* HW_MISC_ALLWINNER_H3_CCU_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ohci.h" #define AW_A10_MMC0_BASE 0x01c0f000 +#define AW_A10_CCM_BASE 0x01c20000 #define AW_A10_PIC_REG_BASE 0x01c20400 #define AW_A10_PIT_REG_BASE 0x01c20c00 #define AW_A10_UART0_REG_BASE 0x01c28000 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "timer", &s->timer, TYPE_AW_A10_PIT); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM); + object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC); object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(get_system_memory(), 0x00000000, &s->sram_a); create_unimplemented_device("a10-sram-ctrl", 0x01c00000, 4 * KiB); + /* Clock Control Module */ + sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE); + /* FIXME use qdev NIC properties instead of nd_table[] */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC); diff --git a/hw/misc/allwinner-a10-ccm.c b/hw/misc/allwinner-a10-ccm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-a10-ccm.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 Clock Control Module emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 CCU, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-a10-ccm.h" + +/* CCM register offsets */ +enum { + REG_PLL1_CFG = 0x0000, /* PLL1 Control */ + REG_PLL1_TUN = 0x0004, /* PLL1 Tuning */ + REG_PLL2_CFG = 0x0008, /* PLL2 Control */ + REG_PLL2_TUN = 0x000C, /* PLL2 Tuning */ + REG_PLL3_CFG = 0x0010, /* PLL3 Control */ + REG_PLL4_CFG = 0x0018, /* PLL4 Control */ + REG_PLL5_CFG = 0x0020, /* PLL5 Control */ + REG_PLL5_TUN = 0x0024, /* PLL5 Tuning */ + REG_PLL6_CFG = 0x0028, /* PLL6 Control */ + REG_PLL6_TUN = 0x002C, /* PLL6 Tuning */ + REG_PLL7_CFG = 0x0030, /* PLL7 Control */ + REG_PLL1_TUN2 = 0x0038, /* PLL1 Tuning2 */ + REG_PLL5_TUN2 = 0x003C, /* PLL5 Tuning2 */ + REG_PLL8_CFG = 0x0040, /* PLL8 Control */ + REG_OSC24M_CFG = 0x0050, /* OSC24M Control */ + REG_CPU_AHB_APB0_CFG = 0x0054, /* CPU, AHB and APB0 Divide Ratio */ +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* CCM register reset values */ +enum { + REG_PLL1_CFG_RST = 0x21005000, + REG_PLL1_TUN_RST = 0x0A101000, + REG_PLL2_CFG_RST = 0x08100010, + REG_PLL2_TUN_RST = 0x00000000, + REG_PLL3_CFG_RST = 0x0010D063, + REG_PLL4_CFG_RST = 0x21009911, + REG_PLL5_CFG_RST = 0x11049280, + REG_PLL5_TUN_RST = 0x14888000, + REG_PLL6_CFG_RST = 0x21009911, + REG_PLL6_TUN_RST = 0x00000000, + REG_PLL7_CFG_RST = 0x0010D063, + REG_PLL1_TUN2_RST = 0x00000000, + REG_PLL5_TUN2_RST = 0x00000000, + REG_PLL8_CFG_RST = 0x21009911, + REG_OSC24M_CFG_RST = 0x00138013, + REG_CPU_AHB_APB0_CFG_RST = 0x00010010, +}; + +static uint64_t allwinner_a10_ccm_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwA10ClockCtlState *s = AW_A10_CCM(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_PLL1_CFG: + case REG_PLL1_TUN: + case REG_PLL2_CFG: + case REG_PLL2_TUN: + case REG_PLL3_CFG: + case REG_PLL4_CFG: + case REG_PLL5_CFG: + case REG_PLL5_TUN: + case REG_PLL6_CFG: + case REG_PLL6_TUN: + case REG_PLL7_CFG: + case REG_PLL1_TUN2: + case REG_PLL5_TUN2: + case REG_PLL8_CFG: + case REG_OSC24M_CFG: + case REG_CPU_AHB_APB0_CFG: + break; + case 0x158 ... AW_A10_CCM_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented read offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_a10_ccm_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwA10ClockCtlState *s = AW_A10_CCM(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_PLL1_CFG: + case REG_PLL1_TUN: + case REG_PLL2_CFG: + case REG_PLL2_TUN: + case REG_PLL3_CFG: + case REG_PLL4_CFG: + case REG_PLL5_CFG: + case REG_PLL5_TUN: + case REG_PLL6_CFG: + case REG_PLL6_TUN: + case REG_PLL7_CFG: + case REG_PLL1_TUN2: + case REG_PLL5_TUN2: + case REG_PLL8_CFG: + case REG_OSC24M_CFG: + case REG_CPU_AHB_APB0_CFG: + break; + case 0x158 ... AW_A10_CCM_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_a10_ccm_ops = { + .read = allwinner_a10_ccm_read, + .write = allwinner_a10_ccm_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_a10_ccm_reset_enter(Object *obj, ResetType type) +{ + AwA10ClockCtlState *s = AW_A10_CCM(obj); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_PLL1_CFG)] = REG_PLL1_CFG_RST; + s->regs[REG_INDEX(REG_PLL1_TUN)] = REG_PLL1_TUN_RST; + s->regs[REG_INDEX(REG_PLL2_CFG)] = REG_PLL2_CFG_RST; + s->regs[REG_INDEX(REG_PLL2_TUN)] = REG_PLL2_TUN_RST; + s->regs[REG_INDEX(REG_PLL3_CFG)] = REG_PLL3_CFG_RST; + s->regs[REG_INDEX(REG_PLL4_CFG)] = REG_PLL4_CFG_RST; + s->regs[REG_INDEX(REG_PLL5_CFG)] = REG_PLL5_CFG_RST; + s->regs[REG_INDEX(REG_PLL5_TUN)] = REG_PLL5_TUN_RST; + s->regs[REG_INDEX(REG_PLL6_CFG)] = REG_PLL6_CFG_RST; + s->regs[REG_INDEX(REG_PLL6_TUN)] = REG_PLL6_TUN_RST; + s->regs[REG_INDEX(REG_PLL7_CFG)] = REG_PLL7_CFG_RST; + s->regs[REG_INDEX(REG_PLL1_TUN2)] = REG_PLL1_TUN2_RST; + s->regs[REG_INDEX(REG_PLL5_TUN2)] = REG_PLL5_TUN2_RST; + s->regs[REG_INDEX(REG_PLL8_CFG)] = REG_PLL8_CFG_RST; + s->regs[REG_INDEX(REG_OSC24M_CFG)] = REG_OSC24M_CFG_RST; + s->regs[REG_INDEX(REG_CPU_AHB_APB0_CFG)] = REG_CPU_AHB_APB0_CFG_RST; +} + +static void allwinner_a10_ccm_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwA10ClockCtlState *s = AW_A10_CCM(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_a10_ccm_ops, s, + TYPE_AW_A10_CCM, AW_A10_CCM_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_a10_ccm_vmstate = { + .name = "allwinner-a10-ccm", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwA10ClockCtlState, AW_A10_CCM_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_a10_ccm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = allwinner_a10_ccm_reset_enter; + dc->vmsd = &allwinner_a10_ccm_vmstate; +} + +static const TypeInfo allwinner_a10_ccm_info = { + .name = TYPE_AW_A10_CCM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_a10_ccm_init, + .instance_size = sizeof(AwA10ClockCtlState), + .class_init = allwinner_a10_ccm_class_init, +}; + +static void allwinner_a10_ccm_register(void) +{ + type_register_static(&allwinner_a10_ccm_info); +} + +type_init(allwinner_a10_ccm_register) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select AHCI select ALLWINNER_A10_PIT select ALLWINNER_A10_PIC + select ALLWINNER_A10_CCM select ALLWINNER_EMAC select SERIAL select UNIMP diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config VIRT_CTRL config LASI bool +config ALLWINNER_A10_CCM + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ subdir('macio') softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c')) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_CCM', if_true: files('allwinner-a10-ccm.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c')) specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> During SPL boot several DRAM Controller registers are used. Most important registers are those related to DRAM initialization and calibration, where SPL initiates process and waits until certain bit is set/cleared. This patch adds these registers, initializes reset values from user's guide and updates state of registers as SPL expects it. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 2 + include/hw/misc/allwinner-a10-dramc.h | 68 ++++++++++ hw/arm/allwinner-a10.c | 7 + hw/misc/allwinner-a10-dramc.c | 179 ++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + 7 files changed, 261 insertions(+) create mode 100644 include/hw/misc/allwinner-a10-dramc.h create mode 100644 hw/misc/allwinner-a10-dramc.c diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ehci.h" #include "hw/rtc/allwinner-rtc.h" #include "hw/misc/allwinner-a10-ccm.h" +#include "hw/misc/allwinner-a10-dramc.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { ARMCPU cpu; AwA10ClockCtlState ccm; + AwA10DramControllerState dramc; AwA10PITState timer; AwA10PICState intc; AwEmacState emac; diff --git a/include/hw/misc/allwinner-a10-dramc.h b/include/hw/misc/allwinner-a10-dramc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-a10-dramc.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 DRAM Controller emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 DRAMC, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_A10_DRAMC_H +#define HW_MISC_ALLWINNER_A10_DRAMC_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "hw/register.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by DRAMC device */ +#define AW_A10_DRAMC_IOSIZE (0x1000) + +/** Total number of known registers */ +#define AW_A10_DRAMC_REGS_NUM (AW_A10_DRAMC_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_A10_DRAMC "allwinner-a10-dramc" +OBJECT_DECLARE_SIMPLE_TYPE(AwA10DramControllerState, AW_A10_DRAMC) + +/** @} */ + +/** + * Allwinner A10 DRAMC object instance state. + */ +struct AwA10DramControllerState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_A10_DRAMC_REGS_NUM]; +}; + +#endif /* HW_MISC_ALLWINNER_A10_DRAMC_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#define AW_A10_DRAMC_BASE 0x01c01000 #define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_CCM_BASE 0x01c20000 #define AW_A10_PIC_REG_BASE 0x01c20400 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM); + object_initialize_child(obj, "dramc", &s->dramc, TYPE_AW_A10_DRAMC); + object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC); object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE); + /* DRAM Control Module */ + sysbus_realize(SYS_BUS_DEVICE(&s->dramc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 0, AW_A10_DRAMC_BASE); + /* FIXME use qdev NIC properties instead of nd_table[] */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC); diff --git a/hw/misc/allwinner-a10-dramc.c b/hw/misc/allwinner-a10-dramc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-a10-dramc.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 DRAM Controller emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 DRAMC, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-a10-dramc.h" + +/* DRAMC register offsets */ +enum { + REG_SDR_CCR = 0x0000, + REG_SDR_ZQCR0 = 0x00a8, + REG_SDR_ZQSR = 0x00b0 +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* DRAMC register flags */ +enum { + REG_SDR_CCR_DATA_TRAINING = (1 << 30), + REG_SDR_CCR_DRAM_INIT = (1 << 31), +}; +enum { + REG_SDR_ZQSR_ZCAL = (1 << 31), +}; + +/* DRAMC register reset values */ +enum { + REG_SDR_CCR_RESET = 0x80020000, + REG_SDR_ZQCR0_RESET = 0x07b00000, + REG_SDR_ZQSR_RESET = 0x80000000 +}; + +static uint64_t allwinner_a10_dramc_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwA10DramControllerState *s = AW_A10_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_SDR_CCR: + case REG_SDR_ZQCR0: + case REG_SDR_ZQSR: + break; + case 0x2e4 ... AW_A10_DRAMC_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented read offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_a10_dramc_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwA10DramControllerState *s = AW_A10_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_SDR_CCR: + if (val & REG_SDR_CCR_DRAM_INIT) { + /* Clear DRAM_INIT to indicate process is done. */ + val &= ~REG_SDR_CCR_DRAM_INIT; + } + if (val & REG_SDR_CCR_DATA_TRAINING) { + /* Clear DATA_TRAINING to indicate process is done. */ + val &= ~REG_SDR_CCR_DATA_TRAINING; + } + break; + case REG_SDR_ZQCR0: + /* Set ZCAL in ZQSR to indicate calibration is done. */ + s->regs[REG_INDEX(REG_SDR_ZQSR)] |= REG_SDR_ZQSR_ZCAL; + break; + case 0x2e4 ... AW_A10_DRAMC_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_a10_dramc_ops = { + .read = allwinner_a10_dramc_read, + .write = allwinner_a10_dramc_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_a10_dramc_reset_enter(Object *obj, ResetType type) +{ + AwA10DramControllerState *s = AW_A10_DRAMC(obj); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_SDR_CCR)] = REG_SDR_CCR_RESET; + s->regs[REG_INDEX(REG_SDR_ZQCR0)] = REG_SDR_ZQCR0_RESET; + s->regs[REG_INDEX(REG_SDR_ZQSR)] = REG_SDR_ZQSR_RESET; +} + +static void allwinner_a10_dramc_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwA10DramControllerState *s = AW_A10_DRAMC(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_a10_dramc_ops, s, + TYPE_AW_A10_DRAMC, AW_A10_DRAMC_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_a10_dramc_vmstate = { + .name = "allwinner-a10-dramc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwA10DramControllerState, + AW_A10_DRAMC_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_a10_dramc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = allwinner_a10_dramc_reset_enter; + dc->vmsd = &allwinner_a10_dramc_vmstate; +} + +static const TypeInfo allwinner_a10_dramc_info = { + .name = TYPE_AW_A10_DRAMC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_a10_dramc_init, + .instance_size = sizeof(AwA10DramControllerState), + .class_init = allwinner_a10_dramc_class_init, +}; + +static void allwinner_a10_dramc_register(void) +{ + type_register_static(&allwinner_a10_dramc_info); +} + +type_init(allwinner_a10_dramc_register) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_PIT select ALLWINNER_A10_PIC select ALLWINNER_A10_CCM + select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC select SERIAL select UNIMP diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config LASI config ALLWINNER_A10_CCM bool +config ALLWINNER_A10_DRAMC + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ subdir('macio') softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_CCM', if_true: files('allwinner-a10-ccm.c')) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_DRAMC', if_true: files('allwinner-a10-dramc.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c')) specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch implements Allwinner TWI/I2C controller emulation. Only master-mode functionality is implemented. The SPL boot for Cubieboard expects AXP209 PMIC on TWI0/I2C0 bus, so this is first part enabling the TWI/I2C bus operation. Since both Allwinner A10 and H3 use the same module, it is added for both boards. Docs are also updated for Cubieboard and Orangepi-PC board to indicate I2C availability. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/cubieboard.rst | 1 + docs/system/arm/orangepi.rst | 1 + include/hw/arm/allwinner-a10.h | 2 + include/hw/arm/allwinner-h3.h | 3 + include/hw/i2c/allwinner-i2c.h | 55 ++++ hw/arm/allwinner-a10.c | 8 + hw/arm/allwinner-h3.c | 11 +- hw/i2c/allwinner-i2c.c | 459 +++++++++++++++++++++++++++++++++ hw/arm/Kconfig | 2 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 5 + 12 files changed, 551 insertions(+), 1 deletion(-) create mode 100644 include/hw/i2c/allwinner-i2c.h create mode 100644 hw/i2c/allwinner-i2c.c diff --git a/docs/system/arm/cubieboard.rst b/docs/system/arm/cubieboard.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cubieboard.rst +++ b/docs/system/arm/cubieboard.rst @@ -XXX,XX +XXX,XX @@ Emulated devices: - SDHCI - USB controller - SATA controller +- TWI (I2C) controller diff --git a/docs/system/arm/orangepi.rst b/docs/system/arm/orangepi.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/orangepi.rst +++ b/docs/system/arm/orangepi.rst @@ -XXX,XX +XXX,XX @@ The Orange Pi PC machine supports the following devices: * Clock Control Unit * System Control module * Security Identifier device + * TWI (I2C) Limitations """"""""""" diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/rtc/allwinner-rtc.h" #include "hw/misc/allwinner-a10-ccm.h" #include "hw/misc/allwinner-a10-dramc.h" +#include "hw/i2c/allwinner-i2c.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { AwEmacState emac; AllwinnerAHCIState sata; AwSdHostState mmc0; + AWI2CState i2c0; AwRtcState rtc; MemoryRegion sram_a; EHCISysBusState ehci[AW_A10_NUM_USB]; diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/allwinner-sdhost.h" #include "hw/net/allwinner-sun8i-emac.h" #include "hw/rtc/allwinner-rtc.h" +#include "hw/i2c/allwinner-i2c.h" #include "target/arm/cpu.h" #include "sysemu/block-backend.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_DEV_UART2, AW_H3_DEV_UART3, AW_H3_DEV_EMAC, + AW_H3_DEV_TWI0, AW_H3_DEV_DRAMCOM, AW_H3_DEV_DRAMCTL, AW_H3_DEV_DRAMPHY, @@ -XXX,XX +XXX,XX @@ struct AwH3State { AwH3SysCtrlState sysctrl; AwSidState sid; AwSdHostState mmc0; + AWI2CState i2c0; AwSun8iEmacState emac; AwRtcState rtc; GICState gic; diff --git a/include/hw/i2c/allwinner-i2c.h b/include/hw/i2c/allwinner-i2c.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/i2c/allwinner-i2c.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner I2C Bus Serial Interface registers definition + * + * Copyright (C) 2022 Strahinja Jankovic. <strahinja.p.jankovic@gmail.com> + * + * This file is derived from IMX I2C controller, + * by Jean-Christophe DUBOIS . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef ALLWINNER_I2C_H +#define ALLWINNER_I2C_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_AW_I2C "allwinner.i2c" +OBJECT_DECLARE_SIMPLE_TYPE(AWI2CState, AW_I2C) + +#define AW_I2C_MEM_SIZE 0x24 + +struct AWI2CState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + I2CBus *bus; + qemu_irq irq; + + uint8_t addr; + uint8_t xaddr; + uint8_t data; + uint8_t cntr; + uint8_t stat; + uint8_t ccr; + uint8_t srst; + uint8_t efr; + uint8_t lcr; +}; + +#endif /* ALLWINNER_I2C_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #define AW_A10_OHCI_BASE 0x01c14400 #define AW_A10_SATA_BASE 0x01c18000 #define AW_A10_RTC_BASE 0x01c20d00 +#define AW_A10_I2C0_BASE 0x01c2ac00 static void aw_a10_init(Object *obj) { @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); + object_initialize_child(obj, "i2c0", &s->i2c0, TYPE_AW_I2C); + if (machine_usb(current_machine)) { int i; @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) /* RTC */ sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal); sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->rtc), 0, AW_A10_RTC_BASE, 10); + + /* I2C */ + sysbus_realize(SYS_BUS_DEVICE(&s->i2c0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c0), 0, AW_A10_I2C0_BASE); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c0), 0, qdev_get_gpio_in(dev, 7)); } static void aw_a10_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_DEV_UART1] = 0x01c28400, [AW_H3_DEV_UART2] = 0x01c28800, [AW_H3_DEV_UART3] = 0x01c28c00, + [AW_H3_DEV_TWI0] = 0x01c2ac00, [AW_H3_DEV_EMAC] = 0x01c30000, [AW_H3_DEV_DRAMCOM] = 0x01c62000, [AW_H3_DEV_DRAMCTL] = 0x01c63000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "uart1", 0x01c28400, 1 * KiB }, { "uart2", 0x01c28800, 1 * KiB }, { "uart3", 0x01c28c00, 1 * KiB }, - { "twi0", 0x01c2ac00, 1 * KiB }, { "twi1", 0x01c2b000, 1 * KiB }, { "twi2", 0x01c2b400, 1 * KiB }, { "scr", 0x01c2c400, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_UART1 = 1, AW_H3_GIC_SPI_UART2 = 2, AW_H3_GIC_SPI_UART3 = 3, + AW_H3_GIC_SPI_TWI0 = 6, AW_H3_GIC_SPI_TIMER0 = 18, AW_H3_GIC_SPI_TIMER1 = 19, AW_H3_GIC_SPI_MMC0 = 60, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) "ram-size"); object_initialize_child(obj, "rtc", &s->rtc, TYPE_AW_RTC_SUN6I); + + object_initialize_child(obj, "twi0", &s->i2c0, TYPE_AW_I2C); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, s->memmap[AW_H3_DEV_RTC]); + /* I2C */ + sysbus_realize(SYS_BUS_DEVICE(&s->i2c0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c0), 0, s->memmap[AW_H3_DEV_TWI0]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c0), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TWI0)); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { create_unimplemented_device(unimplemented[i].device_name, diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner I2C Bus Serial Interface Emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from IMX I2C controller, + * by Jean-Christophe DUBOIS . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * SPDX-License-Identifier: MIT + */ + +#include "qemu/osdep.h" +#include "hw/i2c/allwinner-i2c.h" +#include "hw/irq.h" +#include "migration/vmstate.h" +#include "hw/i2c/i2c.h" +#include "qemu/log.h" +#include "trace.h" +#include "qemu/module.h" + +/* Allwinner I2C memory map */ +#define TWI_ADDR_REG 0x00 /* slave address register */ +#define TWI_XADDR_REG 0x04 /* extended slave address register */ +#define TWI_DATA_REG 0x08 /* data register */ +#define TWI_CNTR_REG 0x0c /* control register */ +#define TWI_STAT_REG 0x10 /* status register */ +#define TWI_CCR_REG 0x14 /* clock control register */ +#define TWI_SRST_REG 0x18 /* software reset register */ +#define TWI_EFR_REG 0x1c /* enhance feature register */ +#define TWI_LCR_REG 0x20 /* line control register */ + +/* Used only in slave mode, do not set */ +#define TWI_ADDR_RESET 0 +#define TWI_XADDR_RESET 0 + +/* Data register */ +#define TWI_DATA_MASK 0xFF +#define TWI_DATA_RESET 0 + +/* Control register */ +#define TWI_CNTR_INT_EN (1 << 7) +#define TWI_CNTR_BUS_EN (1 << 6) +#define TWI_CNTR_M_STA (1 << 5) +#define TWI_CNTR_M_STP (1 << 4) +#define TWI_CNTR_INT_FLAG (1 << 3) +#define TWI_CNTR_A_ACK (1 << 2) +#define TWI_CNTR_MASK 0xFC +#define TWI_CNTR_RESET 0 + +/* Status register */ +#define TWI_STAT_MASK 0xF8 +#define TWI_STAT_RESET 0xF8 + +/* Clock register */ +#define TWI_CCR_CLK_M_MASK 0x78 +#define TWI_CCR_CLK_N_MASK 0x07 +#define TWI_CCR_MASK 0x7F +#define TWI_CCR_RESET 0 + +/* Soft reset */ +#define TWI_SRST_MASK 0x01 +#define TWI_SRST_RESET 0 + +/* Enhance feature */ +#define TWI_EFR_MASK 0x03 +#define TWI_EFR_RESET 0 + +/* Line control */ +#define TWI_LCR_SCL_STATE (1 << 5) +#define TWI_LCR_SDA_STATE (1 << 4) +#define TWI_LCR_SCL_CTL (1 << 3) +#define TWI_LCR_SCL_CTL_EN (1 << 2) +#define TWI_LCR_SDA_CTL (1 << 1) +#define TWI_LCR_SDA_CTL_EN (1 << 0) +#define TWI_LCR_MASK 0x3F +#define TWI_LCR_RESET 0x3A + +/* Status value in STAT register is shifted by 3 bits */ +#define TWI_STAT_SHIFT 3 +#define STAT_FROM_STA(x) ((x) << TWI_STAT_SHIFT) +#define STAT_TO_STA(x) ((x) >> TWI_STAT_SHIFT) + +enum { + STAT_BUS_ERROR = 0, + /* Master mode */ + STAT_M_STA_TX, + STAT_M_RSTA_TX, + STAT_M_ADDR_WR_ACK, + STAT_M_ADDR_WR_NACK, + STAT_M_DATA_TX_ACK, + STAT_M_DATA_TX_NACK, + STAT_M_ARB_LOST, + STAT_M_ADDR_RD_ACK, + STAT_M_ADDR_RD_NACK, + STAT_M_DATA_RX_ACK, + STAT_M_DATA_RX_NACK, + /* Slave mode */ + STAT_S_ADDR_WR_ACK, + STAT_S_ARB_LOST_AW_ACK, + STAT_S_GCA_ACK, + STAT_S_ARB_LOST_GCA_ACK, + STAT_S_DATA_RX_SA_ACK, + STAT_S_DATA_RX_SA_NACK, + STAT_S_DATA_RX_GCA_ACK, + STAT_S_DATA_RX_GCA_NACK, + STAT_S_STP_RSTA, + STAT_S_ADDR_RD_ACK, + STAT_S_ARB_LOST_AR_ACK, + STAT_S_DATA_TX_ACK, + STAT_S_DATA_TX_NACK, + STAT_S_LB_TX_ACK, + /* Master mode, 10-bit */ + STAT_M_2ND_ADDR_WR_ACK, + STAT_M_2ND_ADDR_WR_NACK, + /* Idle */ + STAT_IDLE = 0x1f +} TWI_STAT_STA; + +static const char *allwinner_i2c_get_regname(unsigned offset) +{ + switch (offset) { + case TWI_ADDR_REG: + return "ADDR"; + case TWI_XADDR_REG: + return "XADDR"; + case TWI_DATA_REG: + return "DATA"; + case TWI_CNTR_REG: + return "CNTR"; + case TWI_STAT_REG: + return "STAT"; + case TWI_CCR_REG: + return "CCR"; + case TWI_SRST_REG: + return "SRST"; + case TWI_EFR_REG: + return "EFR"; + case TWI_LCR_REG: + return "LCR"; + default: + return "[?]"; + } +} + +static inline bool allwinner_i2c_is_reset(AWI2CState *s) +{ + return s->srst & TWI_SRST_MASK; +} + +static inline bool allwinner_i2c_bus_is_enabled(AWI2CState *s) +{ + return s->cntr & TWI_CNTR_BUS_EN; +} + +static inline bool allwinner_i2c_interrupt_is_enabled(AWI2CState *s) +{ + return s->cntr & TWI_CNTR_INT_EN; +} + +static void allwinner_i2c_reset_hold(Object *obj) +{ + AWI2CState *s = AW_I2C(obj); + + if (STAT_TO_STA(s->stat) != STAT_IDLE) { + i2c_end_transfer(s->bus); + } + + s->addr = TWI_ADDR_RESET; + s->xaddr = TWI_XADDR_RESET; + s->data = TWI_DATA_RESET; + s->cntr = TWI_CNTR_RESET; + s->stat = TWI_STAT_RESET; + s->ccr = TWI_CCR_RESET; + s->srst = TWI_SRST_RESET; + s->efr = TWI_EFR_RESET; + s->lcr = TWI_LCR_RESET; +} + +static inline void allwinner_i2c_raise_interrupt(AWI2CState *s) +{ + /* + * Raise an interrupt if the device is not reset and it is configured + * to generate some interrupts. + */ + if (!allwinner_i2c_is_reset(s) && allwinner_i2c_bus_is_enabled(s)) { + if (STAT_TO_STA(s->stat) != STAT_IDLE) { + s->cntr |= TWI_CNTR_INT_FLAG; + if (allwinner_i2c_interrupt_is_enabled(s)) { + qemu_irq_raise(s->irq); + } + } + } +} + +static uint64_t allwinner_i2c_read(void *opaque, hwaddr offset, + unsigned size) +{ + uint16_t value; + AWI2CState *s = AW_I2C(opaque); + + switch (offset) { + case TWI_ADDR_REG: + value = s->addr; + break; + case TWI_XADDR_REG: + value = s->xaddr; + break; + case TWI_DATA_REG: + if ((STAT_TO_STA(s->stat) == STAT_M_ADDR_RD_ACK) || + (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_ACK) || + (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_NACK)) { + /* Get the next byte */ + s->data = i2c_recv(s->bus); + + if (s->cntr & TWI_CNTR_A_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + allwinner_i2c_raise_interrupt(s); + } + value = s->data; + break; + case TWI_CNTR_REG: + value = s->cntr; + break; + case TWI_STAT_REG: + value = s->stat; + /* + * If polling when reading then change state to indicate data + * is available + */ + if (STAT_TO_STA(s->stat) == STAT_M_ADDR_RD_ACK) { + if (s->cntr & TWI_CNTR_A_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + allwinner_i2c_raise_interrupt(s); + } + break; + case TWI_CCR_REG: + value = s->ccr; + break; + case TWI_SRST_REG: + value = s->srst; + break; + case TWI_EFR_REG: + value = s->efr; + break; + case TWI_LCR_REG: + value = s->lcr; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", TYPE_AW_I2C, __func__, offset); + value = 0; + break; + } + + trace_allwinner_i2c_read(allwinner_i2c_get_regname(offset), offset, value); + + return (uint64_t)value; +} + +static void allwinner_i2c_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AWI2CState *s = AW_I2C(opaque); + + value &= 0xff; + + trace_allwinner_i2c_write(allwinner_i2c_get_regname(offset), offset, value); + + switch (offset) { + case TWI_ADDR_REG: + s->addr = (uint8_t)value; + break; + case TWI_XADDR_REG: + s->xaddr = (uint8_t)value; + break; + case TWI_DATA_REG: + /* If the device is in reset or not enabled, nothing to do */ + if (allwinner_i2c_is_reset(s) || (!allwinner_i2c_bus_is_enabled(s))) { + break; + } + + s->data = value & TWI_DATA_MASK; + + switch (STAT_TO_STA(s->stat)) { + case STAT_M_STA_TX: + case STAT_M_RSTA_TX: + /* Send address */ + if (i2c_start_transfer(s->bus, extract32(s->data, 1, 7), + extract32(s->data, 0, 1))) { + /* If non zero is returned, the address is not valid */ + s->stat = STAT_FROM_STA(STAT_M_ADDR_WR_NACK); + } else { + /* Determine if read of write */ + if (extract32(s->data, 0, 1)) { + s->stat = STAT_FROM_STA(STAT_M_ADDR_RD_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_ADDR_WR_ACK); + } + allwinner_i2c_raise_interrupt(s); + } + break; + case STAT_M_ADDR_WR_ACK: + case STAT_M_DATA_TX_ACK: + if (i2c_send(s->bus, s->data)) { + /* If the target return non zero then end the transfer */ + s->stat = STAT_FROM_STA(STAT_M_DATA_TX_NACK); + i2c_end_transfer(s->bus); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_TX_ACK); + allwinner_i2c_raise_interrupt(s); + } + break; + default: + break; + } + break; + case TWI_CNTR_REG: + if (!allwinner_i2c_is_reset(s)) { + /* Do something only if not in software reset */ + s->cntr = value & TWI_CNTR_MASK; + + /* Check if start condition should be sent */ + if (s->cntr & TWI_CNTR_M_STA) { + /* Update status */ + if (STAT_TO_STA(s->stat) == STAT_IDLE) { + /* Send start condition */ + s->stat = STAT_FROM_STA(STAT_M_STA_TX); + } else { + /* Send repeated start condition */ + s->stat = STAT_FROM_STA(STAT_M_RSTA_TX); + } + /* Clear start condition */ + s->cntr &= ~TWI_CNTR_M_STA; + } + if (s->cntr & TWI_CNTR_M_STP) { + /* Update status */ + i2c_end_transfer(s->bus); + s->stat = STAT_FROM_STA(STAT_IDLE); + s->cntr &= ~TWI_CNTR_M_STP; + } + if ((s->cntr & TWI_CNTR_INT_FLAG) == 0) { + /* Interrupt flag cleared */ + qemu_irq_lower(s->irq); + } + if ((s->cntr & TWI_CNTR_A_ACK) == 0) { + if (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + } else { + if (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_NACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } + } + allwinner_i2c_raise_interrupt(s); + + } + break; + case TWI_CCR_REG: + s->ccr = value & TWI_CCR_MASK; + break; + case TWI_SRST_REG: + if (((value & TWI_SRST_MASK) == 0) && (s->srst & TWI_SRST_MASK)) { + /* Perform reset */ + allwinner_i2c_reset_hold(OBJECT(s)); + } + s->srst = value & TWI_SRST_MASK; + break; + case TWI_EFR_REG: + s->efr = value & TWI_EFR_MASK; + break; + case TWI_LCR_REG: + s->lcr = value & TWI_LCR_MASK; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", TYPE_AW_I2C, __func__, offset); + break; + } +} + +static const MemoryRegionOps allwinner_i2c_ops = { + .read = allwinner_i2c_read, + .write = allwinner_i2c_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription allwinner_i2c_vmstate = { + .name = TYPE_AW_I2C, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8(addr, AWI2CState), + VMSTATE_UINT8(xaddr, AWI2CState), + VMSTATE_UINT8(data, AWI2CState), + VMSTATE_UINT8(cntr, AWI2CState), + VMSTATE_UINT8(ccr, AWI2CState), + VMSTATE_UINT8(srst, AWI2CState), + VMSTATE_UINT8(efr, AWI2CState), + VMSTATE_UINT8(lcr, AWI2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_i2c_realize(DeviceState *dev, Error **errp) +{ + AWI2CState *s = AW_I2C(dev); + + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_i2c_ops, s, + TYPE_AW_I2C, AW_I2C_MEM_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->bus = i2c_init_bus(dev, "i2c"); +} + +static void allwinner_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = allwinner_i2c_reset_hold; + dc->vmsd = &allwinner_i2c_vmstate; + dc->realize = allwinner_i2c_realize; + dc->desc = "Allwinner I2C Controller"; +} + +static const TypeInfo allwinner_i2c_type_info = { + .name = TYPE_AW_I2C, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AWI2CState), + .class_init = allwinner_i2c_class_init, +}; + +static void allwinner_i2c_register_types(void) +{ + type_register_static(&allwinner_i2c_type_info); +} + +type_init(allwinner_i2c_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_CCM select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC + select ALLWINNER_I2C select SERIAL select UNIMP @@ -XXX,XX +XXX,XX @@ config ALLWINNER_H3 bool select ALLWINNER_A10_PIT select ALLWINNER_SUN8I_EMAC + select ALLWINNER_I2C select SERIAL select ARM_TIMER select ARM_GIC diff --git a/hw/i2c/Kconfig b/hw/i2c/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/Kconfig +++ b/hw/i2c/Kconfig @@ -XXX,XX +XXX,XX @@ config MPC_I2C bool select I2C +config ALLWINNER_I2C + bool + select I2C + config PCA954X bool select I2C diff --git a/hw/i2c/meson.build b/hw/i2c/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/meson.build +++ b/hw/i2c/meson.build @@ -XXX,XX +XXX,XX @@ i2c_ss.add(when: 'CONFIG_BITBANG_I2C', if_true: files('bitbang_i2c.c')) i2c_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_i2c.c')) i2c_ss.add(when: 'CONFIG_IMX_I2C', if_true: files('imx_i2c.c')) i2c_ss.add(when: 'CONFIG_MPC_I2C', if_true: files('mpc_i2c.c')) +i2c_ss.add(when: 'CONFIG_ALLWINNER_I2C', if_true: files('allwinner-i2c.c')) i2c_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('microbit_i2c.c')) i2c_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_smbus.c')) i2c_ss.add(when: 'CONFIG_SMBUS_EEPROM', if_true: files('smbus_eeprom.c')) diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/trace-events +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ i2c_send_async(uint8_t address, uint8_t data) "send_async(addr:0x%02x) data:0x%0 i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x" i2c_ack(void) "" +# allwinner_i2c.c + +allwinner_i2c_read(const char* reg_name, uint64_t offset, uint64_t value) "read %s [0x%" PRIx64 "]: -> 0x%" PRIx64 +allwinner_i2c_write(const char* reg_name, uint64_t offset, uint64_t value) "write %s [0x%" PRIx64 "]: <- 0x%" PRIx64 + # aspeed_i2c.c aspeed_i2c_bus_cmd(uint32_t cmd, const char *cmd_flags, uint32_t count, uint32_t intr_status) "handling cmd=0x%x %s count=%d intr=0x%x" -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch adds minimal support for AXP-209 PMU. Most important is chip ID since U-Boot SPL expects version 0x1. Besides the chip ID register, reset values for two more registers used by A10 U-Boot SPL are covered. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Message-id: 20221226220303.14420-5-strahinja.p.jankovic@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/axp209.c | 238 +++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 2 + hw/misc/Kconfig | 4 + hw/misc/meson.build | 1 + hw/misc/trace-events | 5 + 5 files changed, 250 insertions(+) create mode 100644 hw/misc/axp209.c diff --git a/hw/misc/axp209.c b/hw/misc/axp209.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/axp209.c @@ -XXX,XX +XXX,XX @@ +/* + * AXP-209 PMU Emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * SPDX-License-Identifier: MIT + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "trace.h" +#include "hw/i2c/i2c.h" +#include "migration/vmstate.h" + +#define TYPE_AXP209_PMU "axp209_pmu" + +#define AXP209(obj) \ + OBJECT_CHECK(AXP209I2CState, (obj), TYPE_AXP209_PMU) + +/* registers */ +enum { + REG_POWER_STATUS = 0x0u, + REG_OPERATING_MODE, + REG_OTG_VBUS_STATUS, + REG_CHIP_VERSION, + REG_DATA_CACHE_0, + REG_DATA_CACHE_1, + REG_DATA_CACHE_2, + REG_DATA_CACHE_3, + REG_DATA_CACHE_4, + REG_DATA_CACHE_5, + REG_DATA_CACHE_6, + REG_DATA_CACHE_7, + REG_DATA_CACHE_8, + REG_DATA_CACHE_9, + REG_DATA_CACHE_A, + REG_DATA_CACHE_B, + REG_POWER_OUTPUT_CTRL = 0x12u, + REG_DC_DC2_OUT_V_CTRL = 0x23u, + REG_DC_DC2_DVS_CTRL = 0x25u, + REG_DC_DC3_OUT_V_CTRL = 0x27u, + REG_LDO2_4_OUT_V_CTRL, + REG_LDO3_OUT_V_CTRL, + REG_VBUS_CH_MGMT = 0x30u, + REG_SHUTDOWN_V_CTRL, + REG_SHUTDOWN_CTRL, + REG_CHARGE_CTRL_1, + REG_CHARGE_CTRL_2, + REG_SPARE_CHARGE_CTRL, + REG_PEK_KEY_CTRL, + REG_DC_DC_FREQ_SET, + REG_CHR_TEMP_TH_SET, + REG_CHR_HIGH_TEMP_TH_CTRL, + REG_IPSOUT_WARN_L1, + REG_IPSOUT_WARN_L2, + REG_DISCHR_TEMP_TH_SET, + REG_DISCHR_HIGH_TEMP_TH_CTRL, + REG_IRQ_BANK_1_CTRL = 0x40u, + REG_IRQ_BANK_2_CTRL, + REG_IRQ_BANK_3_CTRL, + REG_IRQ_BANK_4_CTRL, + REG_IRQ_BANK_5_CTRL, + REG_IRQ_BANK_1_STAT = 0x48u, + REG_IRQ_BANK_2_STAT, + REG_IRQ_BANK_3_STAT, + REG_IRQ_BANK_4_STAT, + REG_IRQ_BANK_5_STAT, + REG_ADC_ACIN_V_H = 0x56u, + REG_ADC_ACIN_V_L, + REG_ADC_ACIN_CURR_H, + REG_ADC_ACIN_CURR_L, + REG_ADC_VBUS_V_H, + REG_ADC_VBUS_V_L, + REG_ADC_VBUS_CURR_H, + REG_ADC_VBUS_CURR_L, + REG_ADC_INT_TEMP_H, + REG_ADC_INT_TEMP_L, + REG_ADC_TEMP_SENS_V_H = 0x62u, + REG_ADC_TEMP_SENS_V_L, + REG_ADC_BAT_V_H = 0x78u, + REG_ADC_BAT_V_L, + REG_ADC_BAT_DISCHR_CURR_H, + REG_ADC_BAT_DISCHR_CURR_L, + REG_ADC_BAT_CHR_CURR_H, + REG_ADC_BAT_CHR_CURR_L, + REG_ADC_IPSOUT_V_H, + REG_ADC_IPSOUT_V_L, + REG_DC_DC_MOD_SEL = 0x80u, + REG_ADC_EN_1, + REG_ADC_EN_2, + REG_ADC_SR_CTRL, + REG_ADC_IN_RANGE, + REG_GPIO1_ADC_IRQ_RISING_TH, + REG_GPIO1_ADC_IRQ_FALLING_TH, + REG_TIMER_CTRL = 0x8au, + REG_VBUS_CTRL_MON_SRP, + REG_OVER_TEMP_SHUTDOWN = 0x8fu, + REG_GPIO0_FEAT_SET, + REG_GPIO_OUT_HIGH_SET, + REG_GPIO1_FEAT_SET, + REG_GPIO2_FEAT_SET, + REG_GPIO_SIG_STATE_SET_MON, + REG_GPIO3_SET, + REG_COULOMB_CNTR_CTRL = 0xb8u, + REG_POWER_MEAS_RES, + NR_REGS +}; + +#define AXP209_CHIP_VERSION_ID (0x01) +#define AXP209_DC_DC2_OUT_V_CTRL_RESET (0x16) +#define AXP209_IRQ_BANK_1_CTRL_RESET (0xd8) + +/* A simple I2C slave which returns values of ID or CNT register. */ +typedef struct AXP209I2CState { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + uint8_t regs[NR_REGS]; /* peripheral registers */ + uint8_t ptr; /* current register index */ + uint8_t count; /* counter used for tx/rx */ +} AXP209I2CState; + +/* Reset all counters and load ID register */ +static void axp209_reset_enter(Object *obj, ResetType type) +{ + AXP209I2CState *s = AXP209(obj); + + memset(s->regs, 0, NR_REGS); + s->ptr = 0; + s->count = 0; + s->regs[REG_CHIP_VERSION] = AXP209_CHIP_VERSION_ID; + s->regs[REG_DC_DC2_OUT_V_CTRL] = AXP209_DC_DC2_OUT_V_CTRL_RESET; + s->regs[REG_IRQ_BANK_1_CTRL] = AXP209_IRQ_BANK_1_CTRL_RESET; +} + +/* Handle events from master. */ +static int axp209_event(I2CSlave *i2c, enum i2c_event event) +{ + AXP209I2CState *s = AXP209(i2c); + + s->count = 0; + + return 0; +} + +/* Called when master requests read */ +static uint8_t axp209_rx(I2CSlave *i2c) +{ + AXP209I2CState *s = AXP209(i2c); + uint8_t ret = 0xff; + + if (s->ptr < NR_REGS) { + ret = s->regs[s->ptr++]; + } + + trace_axp209_rx(s->ptr - 1, ret); + + return ret; +} + +/* + * Called when master sends write. + * Update ptr with byte 0, then perform write with second byte. + */ +static int axp209_tx(I2CSlave *i2c, uint8_t data) +{ + AXP209I2CState *s = AXP209(i2c); + + if (s->count == 0) { + /* Store register address */ + s->ptr = data; + s->count++; + trace_axp209_select(data); + } else { + trace_axp209_tx(s->ptr, data); + if (s->ptr == REG_DC_DC2_OUT_V_CTRL) { + s->regs[s->ptr++] = data; + } + } + + return 0; +} + +static const VMStateDescription vmstate_axp209 = { + .name = TYPE_AXP209_PMU, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(regs, AXP209I2CState, NR_REGS), + VMSTATE_UINT8(count, AXP209I2CState), + VMSTATE_UINT8(ptr, AXP209I2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void axp209_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + I2CSlaveClass *isc = I2C_SLAVE_CLASS(oc); + ResettableClass *rc = RESETTABLE_CLASS(oc); + + rc->phases.enter = axp209_reset_enter; + dc->vmsd = &vmstate_axp209; + isc->event = axp209_event; + isc->recv = axp209_rx; + isc->send = axp209_tx; +} + +static const TypeInfo axp209_info = { + .name = TYPE_AXP209_PMU, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(AXP209I2CState), + .class_init = axp209_class_init +}; + +static void axp209_register_devices(void) +{ + type_register_static(&axp209_info); +} + +type_init(axp209_register_devices); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ ARM Machines Allwinner-a10 M: Beniamino Galvani <b.galvani@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> +R: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/*/allwinner* F: include/hw/*/allwinner* F: hw/arm/cubieboard.c F: docs/system/arm/cubieboard.rst +F: hw/misc/axp209.c Allwinner-h3 M: Niek Linnenbank <nieklinnenbank@gmail.com> diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10_CCM config ALLWINNER_A10_DRAMC bool +config AXP209_PMU + bool + depends on I2C + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c' softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-sysctrl.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-sid.c')) +softmmu_ss.add(when: 'CONFIG_AXP209_PMU', if_true: files('axp209.c')) softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true: files('arm_sysctl.c')) softmmu_ss.add(when: 'CONFIG_NSERIES', if_true: files('cbus.c')) softmmu_ss.add(when: 'CONFIG_ECCMEMCTL', if_true: files('eccmemctl.c')) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" avr_power_read(uint8_t value) "power_reduc read value:%u" avr_power_write(uint8_t value) "power_reduc write value:%u" +# axp209.c +axp209_rx(uint8_t reg, uint8_t data) "Read reg 0x%" PRIx8 " : 0x%" PRIx8 +axp209_select(uint8_t reg) "Accessing reg 0x%" PRIx8 +axp209_tx(uint8_t reg, uint8_t data) "Write reg 0x%" PRIx8 " : 0x%" PRIx8 + # eccmemctl.c ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x" ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x" -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> SPL Boot for Cubieboard expects AXP209 connected to I2C0 bus. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221226220303.14420-6-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 6 ++++++ hw/arm/Kconfig | 1 + 2 files changed, 7 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/qdev-properties.h" #include "hw/arm/allwinner-a10.h" +#include "hw/i2c/i2c.h" static struct arm_boot_info cubieboard_binfo = { .loader_start = AW_A10_SDRAM_BASE, @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) BlockBackend *blk; BusState *bus; DeviceState *carddev; + I2CBus *i2c; /* BIOS is not supported by this board */ if (machine->firmware) { @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) exit(1); } + /* Connect AXP 209 */ + i2c = I2C_BUS(qdev_get_child_bus(DEVICE(&a10->i2c0), "i2c")); + i2c_slave_create_simple(i2c, "axp209_pmu", 0x34); + /* Retrieve SD bus */ di = drive_get(IF_SD, 0, 0); blk = di ? blk_by_legacy_dinfo(di) : NULL; diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC select ALLWINNER_I2C + select AXP209_PMU select SERIAL select UNIMP -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch enables copying of SPL from MMC if `-kernel` parameter is not passed when starting QEMU. SPL is copied to SRAM_A. The approach is reused from Allwinner H3 implementation. Tested with Armbian and custom Yocto image. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-7-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 21 +++++++++++++++++++++ hw/arm/allwinner-a10.c | 18 ++++++++++++++++++ hw/arm/cubieboard.c | 5 +++++ 3 files changed, 44 insertions(+) diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-a10-ccm.h" #include "hw/misc/allwinner-a10-dramc.h" #include "hw/i2c/allwinner-i2c.h" +#include "sysemu/block-backend.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { OHCISysBusState ohci[AW_A10_NUM_USB]; }; +/** + * Emulate Boot ROM firmware setup functionality. + * + * A real Allwinner A10 SoC contains a Boot ROM + * which is the first code that runs right after + * the SoC is powered on. The Boot ROM is responsible + * for loading user code (e.g. a bootloader) from any + * of the supported external devices and writing the + * downloaded code to internal SRAM. After loading the SoC + * begins executing the code written to SRAM. + * + * This function emulates the Boot ROM by copying 32 KiB + * of data at offset 8 KiB from the given block device and writes it to + * the start of the first internal SRAM memory. + * + * @s: Allwinner A10 state object pointer + * @blk: Block backend device object pointer + */ +void allwinner_a10_bootrom_setup(AwA10State *s, BlockBackend *blk); + #endif diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#include "hw/loader.h" +#define AW_A10_SRAM_A_BASE 0x00000000 #define AW_A10_DRAMC_BASE 0x01c01000 #define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_CCM_BASE 0x01c20000 @@ -XXX,XX +XXX,XX @@ #define AW_A10_RTC_BASE 0x01c20d00 #define AW_A10_I2C0_BASE 0x01c2ac00 +void allwinner_a10_bootrom_setup(AwA10State *s, BlockBackend *blk) +{ + const int64_t rom_size = 32 * KiB; + g_autofree uint8_t *buffer = g_new0(uint8_t, rom_size); + + if (blk_pread(blk, 8 * KiB, rom_size, buffer, 0) < 0) { + error_setg(&error_fatal, "%s: failed to read BlockBackend data", + __func__); + return; + } + + rom_add_blob("allwinner-a10.bootrom", buffer, rom_size, + rom_size, AW_A10_SRAM_A_BASE, + NULL, NULL, NULL, NULL, false); +} + static void aw_a10_init(Object *obj) { AwA10State *s = AW_A10(obj); diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), AW_A10_SDRAM_BASE, machine->ram); + /* Load target kernel or start using BootROM */ + if (!machine->kernel_filename && blk && blk_is_available(blk)) { + /* Use Boot ROM to copy data from SD card to SRAM */ + allwinner_a10_bootrom_setup(a10, blk); + } /* TODO create and connect IDE devices for ide_drive_get() */ cubieboard_binfo.ram_size = machine->ram_size; -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> Cubieboard now can boot directly from SD card, without the need to pass `-kernel` parameter. Update Avocado tests to cover this functionality. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-8-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 47 +++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_cubieboard_sata(self): 'sda') # cubieboard's reboot is not functioning; omit reboot test. + @skipUnless(os.getenv('AVOCADO_ALLOW_LARGE_STORAGE'), 'storage limited') + def test_arm_cubieboard_openwrt_22_03_2(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:cubieboard + :avocado: tags=device:sd + """ + + # This test download a 7.5 MiB compressed image and expand it + # to 126 MiB. + image_url = ('https://downloads.openwrt.org/releases/22.03.2/targets/' + 'sunxi/cortexa8/openwrt-22.03.2-sunxi-cortexa8-' + 'cubietech_a10-cubieboard-ext4-sdcard.img.gz') + image_hash = ('94b5ecbfbc0b3b56276e5146b899eafa' + '2ac5dc2d08733d6705af9f144f39f554') + image_path_gz = self.fetch_asset(image_url, asset_hash=image_hash, + algorithm='sha256') + image_path = archive.extract(image_path_gz, self.workdir) + image_pow2ceil_expand(image_path) + + self.vm.set_console() + self.vm.add_args('-drive', 'file=' + image_path + ',if=sd,format=raw', + '-nic', 'user', + '-no-reboot') + self.vm.launch() + + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'usbcore.nousb ' + 'noreboot') + + self.wait_for_console_pattern('U-Boot SPL') + + interrupt_interactive_console_until_pattern( + self, 'Hit any key to stop autoboot:', '=>') + exec_command_and_wait_for_pattern(self, "setenv extraargs '" + + kernel_command_line + "'", '=>') + exec_command_and_wait_for_pattern(self, 'boot', 'Starting kernel ...'); + + self.wait_for_console_pattern( + 'Please press Enter to activate this console.') + + exec_command_and_wait_for_pattern(self, ' ', 'root@') + + exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo', + 'Allwinner sun4i/sun5i') + # cubieboard's reboot is not functioning; omit reboot test. + @skipUnless(os.getenv('AVOCADO_TIMEOUT_EXPECTED'), 'Test might timeout') def test_arm_quanta_gsj(self): """ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Don't dereference CPUTLBEntryFull until we verify that the page is valid. Move the other user-only info field updates after the valid check to match. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1412 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230104190056.305143-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ bool sve_probe_page(SVEHostPage *info, bool nofault, CPUARMState *env, #ifdef CONFIG_USER_ONLY flags = probe_access_flags(env, addr, access_type, mmu_idx, nofault, &info->host, retaddr); - memset(&info->attrs, 0, sizeof(info->attrs)); - /* Require both ANON and MTE; see allocation_tag_mem(). */ - info->tagged = (flags & PAGE_ANON) && (flags & PAGE_MTE); #else CPUTLBEntryFull *full; flags = probe_access_full(env, addr, access_type, mmu_idx, nofault, &info->host, &full, retaddr); - info->attrs = full->attrs; - info->tagged = full->pte_attrs == 0xf0; #endif info->flags = flags; @@ -XXX,XX +XXX,XX @@ bool sve_probe_page(SVEHostPage *info, bool nofault, CPUARMState *env, return false; } +#ifdef CONFIG_USER_ONLY + memset(&info->attrs, 0, sizeof(info->attrs)); + /* Require both ANON and MTE; see allocation_tag_mem(). */ + info->tagged = (flags & PAGE_ANON) && (flags & PAGE_MTE); +#else + info->attrs = full->attrs; + info->tagged = full->pte_attrs == 0xf0; +#endif + /* Ensure that info->host[] is relative to addr, not addr + mem_off. */ info->host -= mem_off; return true; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since pxa255_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 2 +- hw/arm/gumstix.c | 3 +-- hw/arm/pxa2xx.c | 4 +++- hw/arm/tosa.c | 2 +- 4 files changed, 6 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, const char *revision); -PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size); +PXA2xxState *pxa255_init(unsigned int sdram_size); #endif /* PXA_H */ diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - MemoryRegion *address_space_mem = get_system_memory(); uint32_t connex_rom = 0x01000000; uint32_t connex_ram = 0x04000000; - cpu = pxa255_init(address_space_mem, connex_ram); + cpu = pxa255_init(connex_ram); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qemu/module.h" #include "qapi/error.h" +#include "exec/address-spaces.h" #include "cpu.h" #include "hw/sysbus.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ PXA2xxState *pxa270_init(MemoryRegion *address_space, } /* Initialise a PXA255 integrated chip (ARM based core). */ -PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size) +PXA2xxState *pxa255_init(unsigned int sdram_size) { + MemoryRegion *address_space = get_system_memory(); PXA2xxState *s; int i; DriveInfo *dinfo; diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ static void tosa_init(MachineState *machine) TC6393xbState *tmio; DeviceState *scp0, *scp1; - mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size); + mpu = pxa255_init(tosa_binfo.ram_size); memory_region_init_rom(rom, NULL, "tosa.rom", TOSA_ROM, &error_fatal); memory_region_add_subregion(address_space_mem, 0, rom); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since pxa270_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 3 +-- hw/arm/gumstix.c | 3 +-- hw/arm/mainstone.c | 10 ++++------ hw/arm/pxa2xx.c | 4 ++-- hw/arm/spitz.c | 6 ++---- hw/arm/z2.c | 3 +-- 6 files changed, 11 insertions(+), 18 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { # define PA_FMT "0x%08lx" -PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, - const char *revision); +PXA2xxState *pxa270_init(unsigned int sdram_size, const char *revision); PXA2xxState *pxa255_init(unsigned int sdram_size); #endif /* PXA_H */ diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - MemoryRegion *address_space_mem = get_system_memory(); uint32_t verdex_rom = 0x02000000; uint32_t verdex_ram = 0x10000000; - cpu = pxa270_init(address_space_mem, verdex_ram, machine->cpu_type); + cpu = pxa270_init(verdex_ram, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info mainstone_binfo = { .ram_size = 0x04000000, }; -static void mainstone_common_init(MemoryRegion *address_space_mem, - MachineState *machine, +static void mainstone_common_init(MachineState *machine, enum mainstone_model_e model, int arm_id) { uint32_t sector_len = 256 * 1024; @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, - machine->cpu_type); + mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type); memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM, &error_fatal); - memory_region_add_subregion(address_space_mem, 0, rom); + memory_region_add_subregion(get_system_memory(), 0x00000000, rom); /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, static void mainstone_init(MachineState *machine) { - mainstone_common_init(get_system_memory(), machine, mainstone, 0x196); + mainstone_common_init(machine, mainstone, 0x196); } static void mainstone2_machine_init(MachineClass *mc) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static void pxa2xx_reset(void *opaque, int line, int level) } /* Initialise a PXA270 integrated chip (ARM based core). */ -PXA2xxState *pxa270_init(MemoryRegion *address_space, - unsigned int sdram_size, const char *cpu_type) +PXA2xxState *pxa270_init(unsigned int sdram_size, const char *cpu_type) { + MemoryRegion *address_space = get_system_memory(); PXA2xxState *s; int i; DriveInfo *dinfo; diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; - MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, - machine->cpu_type); + mpu = pxa270_init(spitz_binfo.ram_size, machine->cpu_type); sms->mpu = mpu; sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); memory_region_init_rom(rom, NULL, "spitz.rom", SPITZ_ROM, &error_fatal); - memory_region_add_subregion(address_space_mem, 0, rom); + memory_region_add_subregion(get_system_memory(), 0, rom); /* Setup peripherals */ spitz_keyboard_register(mpu); diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo aer915_info = { static void z2_init(MachineState *machine) { - MemoryRegion *address_space_mem = get_system_memory(); uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) DeviceState *wm; /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type); + mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/collie.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "qom/object.h" +#define RAM_SIZE (512 * MiB) +#define FLASH_SIZE (32 * MiB) +#define FLASH_SECTOR_SIZE (64 * KiB) + struct CollieMachineState { MachineState parent; @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CollieMachineState, COLLIE_MACHINE) static struct arm_boot_info collie_binfo = { .loader_start = SA_SDCS0, - .ram_size = 0x20000000, + .ram_size = RAM_SIZE, }; static void collie_init(MachineState *machine) @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), SA_SDCS0, machine->ram); dinfo = drive_get(IF_PFLASH, 0, 0); - pflash_cfi01_register(SA_CS0, "collie.fl1", 0x02000000, + pflash_cfi01_register(SA_CS0, "collie.fl1", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - 64 * KiB, 4, 0x00, 0x00, 0x00, 0x00, 0); + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); dinfo = drive_get(IF_PFLASH, 0, 1); - pflash_cfi01_register(SA_CS1, "collie.fl2", 0x02000000, + pflash_cfi01_register(SA_CS1, "collie.fl2", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - 64 * KiB, 4, 0x00, 0x00, 0x00, 0x00, 0); + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); sysbus_create_simple("scoop", 0x40800000, NULL); @@ -XXX,XX +XXX,XX @@ static void collie_machine_class_init(ObjectClass *oc, void *data) mc->init = collie_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("sa1110"); - mc->default_ram_size = 0x20000000; + mc->default_ram_size = RAM_SIZE; mc->default_ram_id = "strongarm.sdram"; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/collie.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info collie_binfo = { static void collie_init(MachineState *machine) { - DriveInfo *dinfo; MachineClass *mc = MACHINE_GET_CLASS(machine); CollieMachineState *cms = COLLIE_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), SA_SDCS0, machine->ram); - dinfo = drive_get(IF_PFLASH, 0, 0); - pflash_cfi01_register(SA_CS0, "collie.fl1", FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); - - dinfo = drive_get(IF_PFLASH, 0, 1); - pflash_cfi01_register(SA_CS1, "collie.fl2", FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); + for (unsigned i = 0; i < 2; i++) { + DriveInfo *dinfo = drive_get(IF_PFLASH, 0, i); + pflash_cfi01_register(i ? SA_CS1 : SA_CS0, + i ? "collie.fl2" : "collie.fl1", FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); + } sysbus_create_simple("scoop", 0x40800000, NULL); -- 2.34.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Add a comment describing the Connex uses a Numonyx RC28F128J3F75 flash, and the Verdex uses a Micron RC28F256P30TFA. Correct the Verdex machine description (we model the 'Pro' board). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-6-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ * Contributions after 2012-01-13 are licensed under the terms of the * GNU GPL, version 2 or (at your option) any later version. */ - + /* * Example usage: * @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) exit(1); } + /* Numonyx RC28F128J3F75 */ if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, sector_len, 2, 0, 0, 0, 0, 0)) { @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) exit(1); } + /* Micron RC28F256P30TFA */ if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, sector_len, 2, 0, 0, 0, 0, 0)) { @@ -XXX,XX +XXX,XX @@ static void verdex_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); - mc->desc = "Gumstix Verdex (PXA270)"; + mc->desc = "Gumstix Verdex Pro XL6P COMs (PXA270)"; mc->init = verdex_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); -- 2.34.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-7-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/error-report.h" #include "hw/arm/pxa.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "cpu.h" -static const int sector_len = 128 * 1024; +#define CONNEX_FLASH_SIZE (16 * MiB) +#define CONNEX_RAM_SIZE (64 * MiB) + +#define VERDEX_FLASH_SIZE (32 * MiB) +#define VERDEX_RAM_SIZE (256 * MiB) + +#define FLASH_SECTOR_SIZE (128 * KiB) static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - uint32_t connex_rom = 0x01000000; - uint32_t connex_ram = 0x04000000; - - cpu = pxa255_init(connex_ram); + cpu = pxa255_init(CONNEX_RAM_SIZE); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) } /* Numonyx RC28F128J3F75 */ - if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, + if (!pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) PXA2xxState *cpu; DriveInfo *dinfo; - uint32_t verdex_rom = 0x02000000; - uint32_t verdex_ram = 0x10000000; - - cpu = pxa270_init(verdex_ram, machine->cpu_type); + cpu = pxa270_init(VERDEX_RAM_SIZE, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) } /* Micron RC28F256P30TFA */ - if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, + if (!pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mainstone.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ * GNU GPL, version 2 or (at your option) any later version. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "hw/arm/pxa.h" @@ -XXX,XX +XXX,XX @@ static const struct keymap map[0xE0] = { enum mainstone_model_e { mainstone }; -#define MAINSTONE_RAM 0x04000000 -#define MAINSTONE_ROM 0x00800000 -#define MAINSTONE_FLASH 0x02000000 +#define MAINSTONE_RAM_SIZE (64 * MiB) +#define MAINSTONE_ROM_SIZE (8 * MiB) +#define MAINSTONE_FLASH_SIZE (32 * MiB) static struct arm_boot_info mainstone_binfo = { .loader_start = PXA2XX_SDRAM_BASE, - .ram_size = 0x04000000, + .ram_size = MAINSTONE_RAM_SIZE, }; +#define FLASH_SECTOR_SIZE (256 * KiB) + static void mainstone_common_init(MachineState *machine, enum mainstone_model_e model, int arm_id) { - uint32_t sector_len = 256 * 1024; hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 }; PXA2xxState *mpu; DeviceState *mst_irq; @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, /* Setup CPU & memory */ mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type); - memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM, + memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM_SIZE, &error_fatal); memory_region_add_subregion(get_system_memory(), 0x00000000, rom); @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, dinfo = drive_get(IF_PFLASH, 0, i); if (!pflash_cfi01_register(mainstone_flash_base[i], i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH, + MAINSTONE_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "cpu.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo musicpal_key_info = { .class_init = musicpal_key_class_init, }; +#define FLASH_SECTOR_SIZE (64 * KiB) + static struct arm_boot_info musicpal_binfo = { .loader_start = 0x0, .board_id = 0x20e, @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) BlockBackend *blk = blk_by_legacy_dinfo(dinfo); flash_size = blk_getlength(blk); - if (flash_size != 8*1024*1024 && flash_size != 16*1024*1024 && - flash_size != 32*1024*1024) { + if (flash_size != 8 * MiB && flash_size != 16 * MiB && + flash_size != 32 * MiB) { error_report("Invalid flash image size"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) */ pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, "musicpal.flash", flash_size, - blk, 0x10000, + blk, FLASH_SECTOR_SIZE, MP_FLASH_SIZE_MAX / flash_size, 2, 0x00BF, 0x236D, 0x0000, 0x0000, 0x5555, 0x2AAA, 0); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The total_ram_v1/total_ram_v2 definitions were never used. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { #define flash0_size (16 * 1024 * 1024) #define flash1_size ( 8 * 1024 * 1024) #define flash2_size (32 * 1024 * 1024) -#define total_ram_v1 (sdram_size + flash0_size + flash1_size + OMAP15XX_SRAM_SIZE) -#define total_ram_v2 (sdram_size + flash2_size + OMAP15XX_SRAM_SIZE) static struct arm_boot_info sx1_binfo = { .loader_start = OMAP_EMIFF_BASE, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ * with this program; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "ui/console.h" #include "hw/arm/omap.h" @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -#define sdram_size 0x02000000 -#define sector_size (128 * 1024) -#define flash0_size (16 * 1024 * 1024) -#define flash1_size ( 8 * 1024 * 1024) -#define flash2_size (32 * 1024 * 1024) +#define SDRAM_SIZE (32 * MiB) +#define SECTOR_SIZE (128 * KiB) +#define FLASH0_SIZE (16 * MiB) +#define FLASH1_SIZE (8 * MiB) +#define FLASH2_SIZE (32 * MiB) static struct arm_boot_info sx1_binfo = { .loader_start = OMAP_EMIFF_BASE, - .ram_size = sdram_size, + .ram_size = SDRAM_SIZE, .board_id = 0x265, }; @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) static uint32_t cs3val = 0x00001139; DriveInfo *dinfo; int fl_idx; - uint32_t flash_size = flash0_size; + uint32_t flash_size = FLASH0_SIZE; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) } if (version == 2) { - flash_size = flash2_size; + flash_size = FLASH2_SIZE; } memory_region_add_subregion(address_space, OMAP_EMIFF_BASE, machine->ram); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) if (!pflash_cfi01_register(OMAP_CS0_BASE, "omap_sx1.flash0-1", flash_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, 0)) { + SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) (dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { MemoryRegion *flash_1 = g_new(MemoryRegion, 1); memory_region_init_rom(flash_1, NULL, "omap_sx1.flash1-0", - flash1_size, &error_fatal); + FLASH1_SIZE, &error_fatal); memory_region_add_subregion(address_space, OMAP_CS1_BASE, flash_1); memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, - "sx1.cs1", OMAP_CS1_SIZE - flash1_size); + "sx1.cs1", OMAP_CS1_SIZE - FLASH1_SIZE); memory_region_add_subregion(address_space, - OMAP_CS1_BASE + flash1_size, &cs[1]); + OMAP_CS1_BASE + FLASH1_SIZE, &cs[1]); if (!pflash_cfi01_register(OMAP_CS1_BASE, - "omap_sx1.flash1-1", flash1_size, + "omap_sx1.flash1-1", FLASH1_SIZE, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, 0)) { + SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_machine_v2_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v2; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); - mc->default_ram_size = sdram_size; + mc->default_ram_size = SDRAM_SIZE; mc->default_ram_id = "omap1.dram"; } @@ -XXX,XX +XXX,XX @@ static void sx1_machine_v1_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v1; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); - mc->default_ram_size = sdram_size; + mc->default_ram_size = SDRAM_SIZE; mc->default_ram_id = "omap1.dram"; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/z2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "hw/arm/pxa.h" #include "hw/arm/boot.h" #include "hw/i2c/i2c.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo aer915_info = { .class_init = aer915_class_init, }; +#define FLASH_SECTOR_SIZE (64 * KiB) + static void z2_init(MachineState *machine) { - uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; void *z2_lcd; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Upon introduction in commit b8433303fb ("Set proper device-width for vexpress flash"), ve_pflash_cfi01_register() was calling qdev_init_nofail() which can not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/vexpress.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) dinfo = drive_get(IF_PFLASH, 0, 0); pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0", dinfo); - if (!pflash0) { - error_report("vexpress: error registering flash 0"); - exit(1); - } if (map[VE_NORFLASHALIAS] != -1) { /* Map flash 0 as an alias into low memory */ @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) } dinfo = drive_get(IF_PFLASH, 0, 1); - if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", - dinfo)) { - error_report("vexpress: error registering flash 1"); - exit(1); - } + ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", dinfo); sram_size = 0x2000000; memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since its QOM'ification in commit 368a354f02 ("pflash_cfi0x: QOMified") the pflash_cfi01_register() function does not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 18 ++++++------------ hw/arm/mainstone.c | 13 +++++-------- hw/arm/omap_sx1.c | 22 ++++++++-------------- hw/arm/versatilepb.c | 6 ++---- hw/arm/z2.c | 9 +++------ 5 files changed, 24 insertions(+), 44 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) } /* Numonyx RC28F128J3F75 */ - if (!pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0); /* Interrupt line of NIC is connected to GPIO line 36 */ smc91c111_init(&nd_table[0], 0x04000300, @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) } /* Micron RC28F256P30TFA */ - if (!pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0); /* Interrupt line of NIC is connected to GPIO line 99 */ smc91c111_init(&nd_table[0], 0x04000300, diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { dinfo = drive_get(IF_PFLASH, 0, i); - if (!pflash_cfi01_register(mainstone_flash_base[i], - i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(mainstone_flash_base[i], + i ? "mainstone.flash1" : "mainstone.flash0", + MAINSTONE_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0); } mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS, diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) fl_idx = 0; if ((dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { - if (!pflash_cfi01_register(OMAP_CS0_BASE, - "omap_sx1.flash0-1", flash_size, - blk_by_legacy_dinfo(dinfo), - SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory %d.\n", - fl_idx); - } + pflash_cfi01_register(OMAP_CS0_BASE, + "omap_sx1.flash0-1", flash_size, + blk_by_legacy_dinfo(dinfo), + SECTOR_SIZE, 4, 0, 0, 0, 0, 0); fl_idx++; } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) memory_region_add_subregion(address_space, OMAP_CS1_BASE + FLASH1_SIZE, &cs[1]); - if (!pflash_cfi01_register(OMAP_CS1_BASE, - "omap_sx1.flash1-1", FLASH1_SIZE, - blk_by_legacy_dinfo(dinfo), - SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory %d.\n", - fl_idx); - } + pflash_cfi01_register(OMAP_CS1_BASE, + "omap_sx1.flash1-1", FLASH1_SIZE, + blk_by_legacy_dinfo(dinfo), + SECTOR_SIZE, 4, 0, 0, 0, 0, 0); fl_idx++; } else { memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ static void versatile_init(MachineState *machine, int board_id) /* 0x34000000 NOR Flash */ dinfo = drive_get(IF_PFLASH, 0, 0); - if (!pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", + pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", VERSATILE_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, VERSATILE_FLASH_SECT_SIZE, - 4, 0x0089, 0x0018, 0x0000, 0x0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory.\n"); - } + 4, 0x0089, 0x0018, 0x0000, 0x0, 0); versatile_binfo.ram_size = machine->ram_size; versatile_binfo.board_id = board_id; diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); - if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0); /* setup keypad */ pxa27x_register_keypad(mpu->kp, map, 0x100); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> To avoid forward-declaring PXA2xxI2CState, declare PXA2XX_I2C before its use in pxa2xx_i2c_init() prototype. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ void pxa27x_register_keypad(PXA2xxKeyPadState *kp, const struct keymap *map, int size); /* pxa2xx.c */ -typedef struct PXA2xxI2CState PXA2xxI2CState; +#define TYPE_PXA2XX_I2C "pxa2xx_i2c" +OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxI2CState, PXA2XX_I2C) + PXA2xxI2CState *pxa2xx_i2c_init(hwaddr base, qemu_irq irq, uint32_t page_size); I2CBus *pxa2xx_i2c_bus(PXA2xxI2CState *s); -#define TYPE_PXA2XX_I2C "pxa2xx_i2c" typedef struct PXA2xxI2SState PXA2xxI2SState; -OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxI2CState, PXA2XX_I2C) #define TYPE_PXA2XX_FIR "pxa2xx-fir" OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxFIrState, PXA2XX_FIR) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Add a local 'struct omap_gpif_s *' variable to improve readability. (This also eases next commit conversion). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/omap_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap_gpif_s { /* General-Purpose I/O of OMAP1 */ static void omap_gpio_set(void *opaque, int line, int level) { - struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1; + struct omap_gpif_s *p = opaque; + struct omap_gpio_s *s = &p->omap1; uint16_t prev = s->inputs; if (level) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap1.c | 115 ++++++++++++++++++-------------------- hw/arm/omap2.c | 40 ++++++------- hw/arm/omap_sx1.c | 2 +- hw/arm/palm.c | 2 +- hw/char/omap_uart.c | 7 +-- hw/display/omap_dss.c | 15 +++-- hw/display/omap_lcdc.c | 9 ++- hw/dma/omap_dma.c | 15 +++-- hw/gpio/omap_gpio.c | 15 +++-- hw/intc/omap_intc.c | 12 ++-- hw/misc/omap_gpmc.c | 12 ++-- hw/misc/omap_l4.c | 7 +-- hw/misc/omap_sdrc.c | 7 +-- hw/misc/omap_tap.c | 5 +- hw/sd/omap_mmc.c | 9 ++- hw/ssi/omap_spi.c | 7 +-- hw/timer/omap_gptimer.c | 22 ++++---- hw/timer/omap_synctimer.c | 4 +- 18 files changed, 142 insertions(+), 163 deletions(-) diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap1.c +++ b/hw/arm/omap1.c @@ -XXX,XX +XXX,XX @@ static void omap_timer_fire(void *opaque) static void omap_timer_tick(void *opaque) { - struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *timer = opaque; omap_timer_sync(timer); omap_timer_fire(timer); @@ -XXX,XX +XXX,XX @@ static void omap_timer_tick(void *opaque) static void omap_timer_clk_update(void *opaque, int line, int on) { - struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *timer = opaque; omap_timer_sync(timer); timer->rate = on ? omap_clk_getrate(timer->clk) : 0; @@ -XXX,XX +XXX,XX @@ static void omap_timer_clk_setup(struct omap_mpu_timer_s *timer) static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, static void omap_mpu_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_watchdog_timer_s { static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; + struct omap_watchdog_timer_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, static void omap_wd_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; + struct omap_watchdog_timer_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_32khz_timer_s { static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; + struct omap_32khz_timer_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, static void omap_os_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; + struct omap_32khz_timer_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static struct omap_32khz_timer_s *omap_os_timer_init(MemoryRegion *memory, static uint64_t omap_ulpd_pm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t ret; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static inline void omap_ulpd_req_update(struct omap_mpu_state_s *s, static void omap_ulpd_pm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; int64_t now, ticks; int div, mult; static const int bypass_div[4] = { 1, 2, 4, 4 }; @@ -XXX,XX +XXX,XX @@ static void omap_ulpd_pm_init(MemoryRegion *system_memory, static uint64_t omap_pin_cfg_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static inline void omap_pin_modconf1_update(struct omap_mpu_state_s *s, static void omap_pin_cfg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint32_t diff; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static void omap_pin_cfg_init(MemoryRegion *system_memory, static uint64_t omap_id_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static void omap_id_init(MemoryRegion *memory, struct omap_mpu_state_s *mpu) static uint64_t omap_mpui_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpui_read(void *opaque, hwaddr addr, static void omap_mpui_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_tipb_bridge_s { static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; + struct omap_tipb_bridge_s *s = opaque; if (size < 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, static void omap_tipb_bridge_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; + struct omap_tipb_bridge_s *s = opaque; if (size < 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static struct omap_tipb_bridge_s *omap_tipb_bridge_init( static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint32_t ret; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, static void omap_tcmi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct dpll_ctl_s { static uint64_t omap_dpll_read(void *opaque, hwaddr addr, unsigned size) { - struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; + struct dpll_ctl_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dpll_read(void *opaque, hwaddr addr, static void omap_dpll_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; + struct dpll_ctl_s *s = opaque; uint16_t diff; static const int bypass_div[4] = { 1, 2, 4, 4 }; int div, mult; @@ -XXX,XX +XXX,XX @@ static struct dpll_ctl_s *omap_dpll_init(MemoryRegion *memory, static uint64_t omap_clkm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static inline void omap_clkm_ckout1_update(struct omap_mpu_state_s *s, static void omap_clkm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t diff; omap_clk clk; static const char *clkschemename[8] = { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_clkm_ops = { static uint64_t omap_clkdsp_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; CPUState *cpu = CPU(s->cpu); if (size != 2) { @@ -XXX,XX +XXX,XX @@ static inline void omap_clkdsp_idlect2_update(struct omap_mpu_state_s *s, static void omap_clkdsp_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t diff; if (size != 2) { @@ -XXX,XX +XXX,XX @@ struct omap_mpuio_s { static void omap_mpuio_set(void *opaque, int line, int level) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; uint16_t prev = s->inputs; if (level) @@ -XXX,XX +XXX,XX @@ static void omap_mpuio_kbd_update(struct omap_mpuio_s *s) static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, static void omap_mpuio_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap_mpuio_reset(struct omap_mpuio_s *s) static void omap_mpuio_onoff(void *opaque, int line, int on) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; s->clk = on; if (on) @@ -XXX,XX +XXX,XX @@ static void omap_uwire_transfer_start(struct omap_uwire_s *s) } } -static uint64_t omap_uwire_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_uwire_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; + struct omap_uwire_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_uwire_read(void *opaque, hwaddr addr, static void omap_uwire_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; + struct omap_uwire_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static void omap_pwl_update(struct omap_pwl_s *s) } } -static uint64_t omap_pwl_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_pwl_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_pwl_read(void *opaque, hwaddr addr, static void omap_pwl_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static void omap_pwl_reset(struct omap_pwl_s *s) static void omap_pwl_clk_update(void *opaque, int line, int on) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; s->clk = on; omap_pwl_update(s); @@ -XXX,XX +XXX,XX @@ struct omap_pwt_s { omap_clk clk; }; -static uint64_t omap_pwt_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_pwt_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; + struct omap_pwt_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_pwt_read(void *opaque, hwaddr addr, static void omap_pwt_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; + struct omap_pwt_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static void omap_rtc_alarm_update(struct omap_rtc_s *s) printf("%s: conversion failed\n", __func__); } -static uint64_t omap_rtc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_rtc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; + struct omap_rtc_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint8_t i; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_rtc_read(void *opaque, hwaddr addr, static void omap_rtc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; + struct omap_rtc_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; struct tm new_tm; time_t ti[2]; @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_rx_newdata(struct omap_mcbsp_s *s) static void omap_mcbsp_source_tick(void *opaque) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; if (!s->rx_rate) @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_tx_newdata(struct omap_mcbsp_s *s) static void omap_mcbsp_sink_tick(void *opaque) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; if (!s->tx_rate) @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_req_update(struct omap_mcbsp_s *s) static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, static void omap_mcbsp_writeh(void *opaque, hwaddr addr, uint32_t value) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; switch (offset) { @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr, static void omap_mcbsp_writew(void *opaque, hwaddr addr, uint32_t value) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (offset == 0x04) { /* DXR */ @@ -XXX,XX +XXX,XX @@ static struct omap_mcbsp_s *omap_mcbsp_init(MemoryRegion *system_memory, static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; if (s->rx_rate) { s->rx_req = s->codec->in.len; @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) static void omap_mcbsp_i2s_start(void *opaque, int line, int level) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; if (s->tx_rate) { s->tx_req = s->codec->out.size; @@ -XXX,XX +XXX,XX @@ static void omap_lpg_reset(struct omap_lpg_s *s) omap_lpg_update(s); } -static uint64_t omap_lpg_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_lpg_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_lpg_read(void *opaque, hwaddr addr, static void omap_lpg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_lpg_ops = { static void omap_lpg_clk_update(void *opaque, int line, int on) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; s->clk = on; omap_lpg_update(s); @@ -XXX,XX +XXX,XX @@ static void omap_setup_mpui_io(MemoryRegion *system_memory, /* General chip reset */ static void omap1_mpu_reset(void *opaque) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; omap_dma_reset(mpu->dma); omap_mpu_timer_reset(mpu->timer[0]); @@ -XXX,XX +XXX,XX @@ static void omap_setup_dsp_mapping(MemoryRegion *system_memory, void omap_mpu_wakeup(void *opaque, int irq, int req) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; CPUState *cpu = CPU(mpu->cpu); if (cpu->halted) { diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -XXX,XX +XXX,XX @@ static inline void omap_eac_out_empty(struct omap_eac_s *s) static void omap_eac_in_cb(void *opaque, int avail_b) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; s->codec.rxavail = avail_b >> 2; omap_eac_in_refill(s); @@ -XXX,XX +XXX,XX @@ static void omap_eac_in_cb(void *opaque, int avail_b) static void omap_eac_out_cb(void *opaque, int free_b) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; s->codec.txavail = free_b >> 2; if (s->codec.txlen) @@ -XXX,XX +XXX,XX @@ static void omap_eac_reset(struct omap_eac_s *s) omap_eac_interrupt_update(s); } -static uint64_t omap_eac_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_eac_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; uint32_t ret; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_eac_read(void *opaque, hwaddr addr, static void omap_eac_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static void omap_sti_reset(struct omap_sti_s *s) static uint64_t omap_sti_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sti_read(void *opaque, hwaddr addr, static void omap_sti_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_sti_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, unsigned size) { OMAP_BAD_REG(addr); return 0; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, static void omap_sti_fifo_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; int ch = addr >> 6; uint8_t byte = value; @@ -XXX,XX +XXX,XX @@ static void omap_prcm_int_update(struct omap_prcm_s *s, int dom) static uint64_t omap_prcm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; + struct omap_prcm_s *s = opaque; uint32_t ret; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static void omap_prcm_dpll_update(struct omap_prcm_s *s) static void omap_prcm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; + struct omap_prcm_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_sysctl_s { static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; int pad_offset, byte_offset; int value; @@ -XXX,XX +XXX,XX @@ static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; switch (addr) { case 0x000: /* CONTROL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) return 0; } -static void omap_sysctl_write8(void *opaque, hwaddr addr, - uint32_t value) +static void omap_sysctl_write8(void *opaque, hwaddr addr, uint32_t value) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; int pad_offset, byte_offset; int prev_value; @@ -XXX,XX +XXX,XX @@ static void omap_sysctl_write8(void *opaque, hwaddr addr, } } -static void omap_sysctl_write(void *opaque, hwaddr addr, - uint32_t value) +static void omap_sysctl_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; switch (addr) { case 0x000: /* CONTROL_REVISION */ @@ -XXX,XX +XXX,XX @@ static struct omap_sysctl_s *omap_sysctl_init(struct omap_target_agent_s *ta, /* General chip reset */ static void omap2_mpu_reset(void *opaque) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; omap_dma_reset(mpu->dma); omap_prcm_reset(mpu->prcm); diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static uint64_t static_read(void *opaque, hwaddr offset, unsigned size) { - uint32_t *val = (uint32_t *) opaque; + uint32_t *val = opaque; uint32_t mask = (4 / size) - 1; return *val >> ((offset & mask) << 3); diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ static struct { static void palmte_button_event(void *opaque, int keycode) { - struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *cpu = opaque; if (palmte_keymap[keycode & 0x7f].row != -1) omap_mpuio_key(cpu->mpuio, diff --git a/hw/char/omap_uart.c b/hw/char/omap_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/omap_uart.c +++ b/hw/char/omap_uart.c @@ -XXX,XX +XXX,XX @@ struct omap_uart_s *omap_uart_init(hwaddr base, return s; } -static uint64_t omap_uart_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_uart_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_uart_s *s = (struct omap_uart_s *) opaque; + struct omap_uart_s *s = opaque; if (size == 4) { return omap_badwidth_read8(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_uart_read(void *opaque, hwaddr addr, static void omap_uart_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_uart_s *s = (struct omap_uart_s *) opaque; + struct omap_uart_s *s = opaque; if (size == 4) { omap_badwidth_write8(opaque, addr, value); diff --git a/hw/display/omap_dss.c b/hw/display/omap_dss.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_dss.c +++ b/hw/display/omap_dss.c @@ -XXX,XX +XXX,XX @@ void omap_dss_reset(struct omap_dss_s *s) static uint64_t omap_diss_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_diss_read(void *opaque, hwaddr addr, static void omap_diss_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_diss_ops = { static uint64_t omap_disc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_disc_read(void *opaque, hwaddr addr, static void omap_disc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static void omap_rfbi_transfer_start(struct omap_dss_s *s) omap_dispc_interrupt_update(s); } -static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, static void omap_rfbi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/display/omap_lcdc.c b/hw/display/omap_lcdc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_lcdc.c +++ b/hw/display/omap_lcdc.c @@ -XXX,XX +XXX,XX @@ static void draw_line16_32(void *opaque, uint8_t *d, const uint8_t *s, static void omap_update_display(void *opaque) { - struct omap_lcd_panel_s *omap_lcd = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *omap_lcd = opaque; DisplaySurface *surface; drawfn draw_line; int size, height, first, last; @@ -XXX,XX +XXX,XX @@ static void omap_lcd_update(struct omap_lcd_panel_s *s) { } } -static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *s = opaque; switch (addr) { case 0x00: /* LCD_CONTROL */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, static void omap_lcdc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *s = opaque; switch (addr) { case 0x00: /* LCD_CONTROL */ diff --git a/hw/dma/omap_dma.c b/hw/dma/omap_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/omap_dma.c +++ b/hw/dma/omap_dma.c @@ -XXX,XX +XXX,XX @@ static int omap_dma_sys_read(struct omap_dma_s *s, int offset, return 0; } -static uint64_t omap_dma_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_dma_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int reg, ch; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dma_read(void *opaque, hwaddr addr, static void omap_dma_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int reg, ch; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_dma_ops = { static void omap_dma_request(void *opaque, int drq, int req) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; /* The request pins are level triggered in QEMU. */ if (req) { if (~s->dma->drqbmp & (1ULL << drq)) { @@ -XXX,XX +XXX,XX @@ static void omap_dma_request(void *opaque, int drq, int req) /* XXX: this won't be needed once soc_dma knows about clocks. */ static void omap_dma_clk_update(void *opaque, int line, int on) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int i; s->dma->freq = omap_clk_getrate(s->clk); @@ -XXX,XX +XXX,XX @@ static void omap_dma_interrupts_4_update(struct omap_dma_s *s) static uint64_t omap_dma4_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int irqn = 0, chnum; struct omap_dma_channel_s *ch; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dma4_read(void *opaque, hwaddr addr, static void omap_dma4_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int chnum, irqn = 0; struct omap_dma_channel_s *ch; diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ static void omap_gpio_set(void *opaque, int line, int level) static uint64_t omap_gpio_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; + struct omap_gpio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpio_read(void *opaque, hwaddr addr, static void omap_gpio_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; + struct omap_gpio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_module_reset(struct omap2_gpio_s *s) static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) { - struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; + struct omap2_gpio_s *s = opaque; switch (addr) { case 0x00: /* GPIO_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) static void omap2_gpio_module_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; + struct omap2_gpio_s *s = opaque; uint32_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap2_gpif_reset(DeviceState *dev) s->gpo = 0; } -static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) { - struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; + struct omap2_gpif_s *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, static void omap2_gpif_top_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; + struct omap2_gpif_s *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -XXX,XX +XXX,XX @@ static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) static void omap_set_intr(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr(void *opaque, int irq, int req) /* Simplified version with no edge detection */ static void omap_set_intr_noedge(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr_noedge(void *opaque, int irq, int req) static uint64_t omap_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int i, offset = addr; int bank_no = offset >> 8; int line_no; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_inth_read(void *opaque, hwaddr addr, static void omap_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int i, offset = addr; int bank_no = offset >> 8; struct omap_intr_handler_bank_s *bank = &s->bank[bank_no]; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_intc_info = { static uint64_t omap2_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_inth_read(void *opaque, hwaddr addr, static void omap2_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; diff --git a/hw/misc/omap_gpmc.c b/hw/misc/omap_gpmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_gpmc.c +++ b/hw/misc/omap_gpmc.c @@ -XXX,XX +XXX,XX @@ static void omap_gpmc_dma_update(struct omap_gpmc_s *s, int value) static uint64_t omap_nand_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_cs_file_s *f = (struct omap_gpmc_cs_file_s *)opaque; + struct omap_gpmc_cs_file_s *f = opaque; uint64_t v; nand_setpins(f->dev, 0, 0, 0, 1, 0); switch (omap_gpmc_devsize(f)) { @@ -XXX,XX +XXX,XX @@ static void omap_nand_setio(DeviceState *dev, uint64_t value, static void omap_nand_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_cs_file_s *f = (struct omap_gpmc_cs_file_s *)opaque; + struct omap_gpmc_cs_file_s *f = opaque; nand_setpins(f->dev, 0, 0, 0, 1, 0); omap_nand_setio(f->dev, value, omap_gpmc_devsize(f), size); } @@ -XXX,XX +XXX,XX @@ static void fill_prefetch_fifo(struct omap_gpmc_s *s) static uint64_t omap_gpmc_prefetch_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; uint32_t data; if (s->prefetch.config1 & 1) { /* The TRM doesn't define the behaviour if you read from the @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpmc_prefetch_read(void *opaque, hwaddr addr, static void omap_gpmc_prefetch_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs = prefetch_cs(s->prefetch.config1); if ((s->prefetch.config1 & 1) == 0) { /* The TRM doesn't define the behaviour of writing to the @@ -XXX,XX +XXX,XX @@ static int gpmc_wordaccess_only(hwaddr addr) static uint64_t omap_gpmc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs; struct omap_gpmc_cs_file_s *f; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpmc_read(void *opaque, hwaddr addr, static void omap_gpmc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs; struct omap_gpmc_cs_file_s *f; diff --git a/hw/misc/omap_l4.c b/hw/misc/omap_l4.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_l4.c +++ b/hw/misc/omap_l4.c @@ -XXX,XX +XXX,XX @@ hwaddr omap_l4_region_size(struct omap_target_agent_s *ta, return ta->start[region].size; } -static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_target_agent_s *s = (struct omap_target_agent_s *) opaque; + struct omap_target_agent_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, static void omap_l4ta_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_target_agent_s *s = (struct omap_target_agent_s *) opaque; + struct omap_target_agent_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/misc/omap_sdrc.c b/hw/misc/omap_sdrc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_sdrc.c +++ b/hw/misc/omap_sdrc.c @@ -XXX,XX +XXX,XX @@ void omap_sdrc_reset(struct omap_sdrc_s *s) s->config = 0x10; } -static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_sdrc_s *s = (struct omap_sdrc_s *) opaque; + struct omap_sdrc_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, static void omap_sdrc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sdrc_s *s = (struct omap_sdrc_s *) opaque; + struct omap_sdrc_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/misc/omap_tap.c b/hw/misc/omap_tap.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_tap.c +++ b/hw/misc/omap_tap.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" /* TEST-Chip-level TAP */ -static uint64_t omap_tap_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_tap_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -XXX,XX +XXX,XX @@ void omap_mmc_reset(struct omap_mmc_s *host) device_cold_reset(DEVICE(host->card)); } -static uint64_t omap_mmc_read(void *opaque, hwaddr offset, - unsigned size) +static uint64_t omap_mmc_read(void *opaque, hwaddr offset, unsigned size) { uint16_t i; - struct omap_mmc_s *s = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, offset); @@ -XXX,XX +XXX,XX @@ static void omap_mmc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { int i; - struct omap_mmc_s *s = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, offset, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_mmc_ops = { static void omap_mmc_cover_cb(void *opaque, int line, int level) { - struct omap_mmc_s *host = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *host = opaque; if (!host->cdet_state && level) { host->status |= 0x0002; diff --git a/hw/ssi/omap_spi.c b/hw/ssi/omap_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/omap_spi.c +++ b/hw/ssi/omap_spi.c @@ -XXX,XX +XXX,XX @@ void omap_mcspi_reset(struct omap_mcspi_s *s) omap_mcspi_interrupt_update(s); } -static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mcspi_s *s = (struct omap_mcspi_s *) opaque; + struct omap_mcspi_s *s = opaque; int ch = 0; uint32_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, static void omap_mcspi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mcspi_s *s = (struct omap_mcspi_s *) opaque; + struct omap_mcspi_s *s = opaque; int ch = 0; if (size != 4) { diff --git a/hw/timer/omap_gptimer.c b/hw/timer/omap_gptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_gptimer.c +++ b/hw/timer/omap_gptimer.c @@ -XXX,XX +XXX,XX @@ static inline void omap_gp_timer_trigger(struct omap_gp_timer_s *timer) static void omap_gp_timer_tick(void *opaque) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; if (!timer->ar) { timer->st = 0; @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_tick(void *opaque) static void omap_gp_timer_match(void *opaque) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; if (timer->trigger == gpt_trigger_both) omap_gp_timer_trigger(timer); @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_match(void *opaque) static void omap_gp_timer_input(void *opaque, int line, int on) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; int trigger; switch (s->capture) { @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_input(void *opaque, int line, int on) static void omap_gp_timer_clk_update(void *opaque, int line, int on) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; omap_gp_timer_sync(timer); timer->rate = on ? omap_clk_getrate(timer->clk) : 0; @@ -XXX,XX +XXX,XX @@ void omap_gp_timer_reset(struct omap_gp_timer_s *s) static uint32_t omap_gp_timer_readw(void *opaque, hwaddr addr) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; switch (addr) { case 0x00: /* TIDR */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_gp_timer_readw(void *opaque, hwaddr addr) static uint32_t omap_gp_timer_readh(void *opaque, hwaddr addr) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; uint32_t ret; if (addr & 2) @@ -XXX,XX +XXX,XX @@ static uint32_t omap_gp_timer_readh(void *opaque, hwaddr addr) } } -static void omap_gp_timer_write(void *opaque, hwaddr addr, - uint32_t value) +static void omap_gp_timer_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; switch (addr) { case 0x00: /* TIDR */ @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_write(void *opaque, hwaddr addr, } } -static void omap_gp_timer_writeh(void *opaque, hwaddr addr, - uint32_t value) +static void omap_gp_timer_writeh(void *opaque, hwaddr addr, uint32_t value) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; if (addr & 2) omap_gp_timer_write(opaque, addr, (value << 16) | s->writeh); diff --git a/hw/timer/omap_synctimer.c b/hw/timer/omap_synctimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_synctimer.c +++ b/hw/timer/omap_synctimer.c @@ -XXX,XX +XXX,XX @@ void omap_synctimer_reset(struct omap_synctimer_s *s) static uint32_t omap_synctimer_readw(void *opaque, hwaddr addr) { - struct omap_synctimer_s *s = (struct omap_synctimer_s *) opaque; + struct omap_synctimer_s *s = opaque; switch (addr) { case 0x00: /* 32KSYNCNT_REV */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_synctimer_readw(void *opaque, hwaddr addr) static uint32_t omap_synctimer_readh(void *opaque, hwaddr addr) { - struct omap_synctimer_s *s = (struct omap_synctimer_s *) opaque; + struct omap_synctimer_s *s = opaque; uint32_t ret; if (addr & 2) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap_gpif_s -> Omap1GpioState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +++--- hw/gpio/omap_gpio.c | 16 ++++++++-------- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ void omap_i2c_set_fclk(OMAPI2CState *i2c, omap_clk clk); /* omap_gpio.c */ #define TYPE_OMAP1_GPIO "omap-gpio" -DECLARE_INSTANCE_CHECKER(struct omap_gpif_s, OMAP1_GPIO, +typedef struct Omap1GpioState Omap1GpioState; +DECLARE_INSTANCE_CHECKER(Omap1GpioState, OMAP1_GPIO, TYPE_OMAP1_GPIO) #define TYPE_OMAP2_GPIO "omap2-gpio" DECLARE_INSTANCE_CHECKER(struct omap2_gpif_s, OMAP2_GPIO, TYPE_OMAP2_GPIO) -typedef struct omap_gpif_s omap_gpif; typedef struct omap2_gpif_s omap2_gpif; /* TODO: clock framework (see above) */ -void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk); +void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk); void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk); void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk); diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap_gpio_s { uint16_t pins; }; -struct omap_gpif_s { +struct Omap1GpioState { SysBusDevice parent_obj; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ struct omap_gpif_s { /* General-Purpose I/O of OMAP1 */ static void omap_gpio_set(void *opaque, int line, int level) { - struct omap_gpif_s *p = opaque; + Omap1GpioState *p = opaque; struct omap_gpio_s *s = &p->omap1; uint16_t prev = s->inputs; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_gpio_module_ops = { static void omap_gpif_reset(DeviceState *dev) { - struct omap_gpif_s *s = OMAP1_GPIO(dev); + Omap1GpioState *s = OMAP1_GPIO(dev); omap_gpio_reset(&s->omap1); } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_gpif_top_ops = { static void omap_gpio_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_gpif_s *s = OMAP1_GPIO(obj); + Omap1GpioState *s = OMAP1_GPIO(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); qdev_init_gpio_in(dev, omap_gpio_set, 16); @@ -XXX,XX +XXX,XX @@ static void omap_gpio_init(Object *obj) static void omap_gpio_realize(DeviceState *dev, Error **errp) { - struct omap_gpif_s *s = OMAP1_GPIO(dev); + Omap1GpioState *s = OMAP1_GPIO(dev); if (!s->clk) { error_setg(errp, "omap-gpio: clk not connected"); @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_realize(DeviceState *dev, Error **errp) } } -void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk) +void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk) { gpio->clk = clk; } static Property omap_gpio_properties[] = { - DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0), + DEFINE_PROP_INT32("mpu_model", Omap1GpioState, mpu_model, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void omap_gpio_class_init(ObjectClass *klass, void *data) static const TypeInfo omap_gpio_info = { .name = TYPE_OMAP1_GPIO, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct omap_gpif_s), + .instance_size = sizeof(Omap1GpioState), .instance_init = omap_gpio_init, .class_init = omap_gpio_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap2_gpif_s -> Omap2GpioState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 9 ++++----- hw/gpio/omap_gpio.c | 20 ++++++++++---------- 2 files changed, 14 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(Omap1GpioState, OMAP1_GPIO, TYPE_OMAP1_GPIO) #define TYPE_OMAP2_GPIO "omap2-gpio" -DECLARE_INSTANCE_CHECKER(struct omap2_gpif_s, OMAP2_GPIO, +typedef struct Omap2GpioState Omap2GpioState; +DECLARE_INSTANCE_CHECKER(Omap2GpioState, OMAP2_GPIO, TYPE_OMAP2_GPIO) -typedef struct omap2_gpif_s omap2_gpif; - /* TODO: clock framework (see above) */ void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk); -void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk); -void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk); +void omap2_gpio_set_iclk(Omap2GpioState *gpio, omap_clk clk); +void omap2_gpio_set_fclk(Omap2GpioState *gpio, uint8_t i, omap_clk clk); /* OMAP2 l4 Interconnect */ struct omap_l4_s; diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap2_gpio_s { uint8_t delay; }; -struct omap2_gpif_s { +struct Omap2GpioState { SysBusDevice parent_obj; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line) static void omap2_gpio_set(void *opaque, int line, int level) { - struct omap2_gpif_s *p = opaque; + Omap2GpioState *p = opaque; struct omap2_gpio_s *s = &p->modules[line >> 5]; line &= 31; @@ -XXX,XX +XXX,XX @@ static void omap_gpif_reset(DeviceState *dev) static void omap2_gpif_reset(DeviceState *dev) { - struct omap2_gpif_s *s = OMAP2_GPIO(dev); + Omap2GpioState *s = OMAP2_GPIO(dev); int i; for (i = 0; i < s->modulecount; i++) { @@ -XXX,XX +XXX,XX @@ static void omap2_gpif_reset(DeviceState *dev) static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) { - struct omap2_gpif_s *s = opaque; + Omap2GpioState *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) static void omap2_gpif_top_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap2_gpif_s *s = opaque; + Omap2GpioState *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static void omap_gpio_realize(DeviceState *dev, Error **errp) static void omap2_gpio_realize(DeviceState *dev, Error **errp) { - struct omap2_gpif_s *s = OMAP2_GPIO(dev); + Omap2GpioState *s = OMAP2_GPIO(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); int i; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_gpio_info = { .class_init = omap_gpio_class_init, }; -void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk) +void omap2_gpio_set_iclk(Omap2GpioState *gpio, omap_clk clk) { gpio->iclk = clk; } -void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk) +void omap2_gpio_set_fclk(Omap2GpioState *gpio, uint8_t i, omap_clk clk) { assert(i <= 5); gpio->fclk[i] = clk; } static Property omap2_gpio_properties[] = { - DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0), + DEFINE_PROP_INT32("mpu_model", Omap2GpioState, mpu_model, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_class_init(ObjectClass *klass, void *data) static const TypeInfo omap2_gpio_info = { .name = TYPE_OMAP2_GPIO, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct omap2_gpif_s), + .instance_size = sizeof(Omap2GpioState), .class_init = omap2_gpio_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap_intr_handler_s -> OMAPIntcState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 9 ++++----- hw/intc/omap_intc.c | 38 +++++++++++++++++++------------------- 2 files changed, 23 insertions(+), 24 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ void omap_clk_reparent(omap_clk clk, omap_clk parent); /* omap_intc.c */ #define TYPE_OMAP_INTC "common-omap-intc" -typedef struct omap_intr_handler_s omap_intr_handler; -DECLARE_INSTANCE_CHECKER(omap_intr_handler, OMAP_INTC, - TYPE_OMAP_INTC) +typedef struct OMAPIntcState OMAPIntcState; +DECLARE_INSTANCE_CHECKER(OMAPIntcState, OMAP_INTC, TYPE_OMAP_INTC) /* @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(omap_intr_handler, OMAP_INTC, * (ie the struct omap_mpu_state_s*) to do the clockname to pointer * translation.) */ -void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk); -void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk); +void omap_intc_set_iclk(OMAPIntcState *intc, omap_clk clk); +void omap_intc_set_fclk(OMAPIntcState *intc, omap_clk clk); /* omap_i2c.c */ #define TYPE_OMAP_I2C "omap_i2c" diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -XXX,XX +XXX,XX @@ struct omap_intr_handler_bank_s { unsigned char priority[32]; }; -struct omap_intr_handler_s { +struct OMAPIntcState { SysBusDevice parent_obj; qemu_irq *pins; @@ -XXX,XX +XXX,XX @@ struct omap_intr_handler_s { struct omap_intr_handler_bank_s bank[3]; }; -static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq) +static void omap_inth_sir_update(OMAPIntcState *s, int is_fiq) { int i, j, sir_intr, p_intr, p; uint32_t level; @@ -XXX,XX +XXX,XX @@ static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq) s->sir_intr[is_fiq] = sir_intr; } -static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) +static inline void omap_inth_update(OMAPIntcState *s, int is_fiq) { int i; uint32_t has_intr = 0; @@ -XXX,XX +XXX,XX @@ static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) static void omap_set_intr(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = opaque; + OMAPIntcState *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr(void *opaque, int irq, int req) /* Simplified version with no edge detection */ static void omap_set_intr_noedge(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = opaque; + OMAPIntcState *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr_noedge(void *opaque, int irq, int req) static uint64_t omap_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int i, offset = addr; int bank_no = offset >> 8; int line_no; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_inth_read(void *opaque, hwaddr addr, static void omap_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int i, offset = addr; int bank_no = offset >> 8; struct omap_intr_handler_bank_s *bank = &s->bank[bank_no]; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_inth_mem_ops = { static void omap_inth_reset(DeviceState *dev) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); int i; for (i = 0; i < s->nbanks; ++i){ @@ -XXX,XX +XXX,XX @@ static void omap_inth_reset(DeviceState *dev) static void omap_intc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_intr_handler_s *s = OMAP_INTC(obj); + OMAPIntcState *s = OMAP_INTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->nbanks = 1; @@ -XXX,XX +XXX,XX @@ static void omap_intc_init(Object *obj) static void omap_intc_realize(DeviceState *dev, Error **errp) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); if (!s->iclk) { error_setg(errp, "omap-intc: clk not connected"); } } -void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk) +void omap_intc_set_iclk(OMAPIntcState *intc, omap_clk clk) { intc->iclk = clk; } -void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk) +void omap_intc_set_fclk(OMAPIntcState *intc, omap_clk clk) { intc->fclk = clk; } static Property omap_intc_properties[] = { - DEFINE_PROP_UINT32("size", struct omap_intr_handler_s, size, 0x100), + DEFINE_PROP_UINT32("size", OMAPIntcState, size, 0x100), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_intc_info = { static uint64_t omap2_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_inth_read(void *opaque, hwaddr addr, static void omap2_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_inth_mem_ops = { static void omap2_intc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_intr_handler_s *s = OMAP_INTC(obj); + OMAPIntcState *s = OMAP_INTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->level_only = 1; @@ -XXX,XX +XXX,XX @@ static void omap2_intc_init(Object *obj) static void omap2_intc_realize(DeviceState *dev, Error **errp) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); if (!s->iclk) { error_setg(errp, "omap2-intc: iclk not connected"); @@ -XXX,XX +XXX,XX @@ static void omap2_intc_realize(DeviceState *dev, Error **errp) } static Property omap2_intc_properties[] = { - DEFINE_PROP_UINT8("revision", struct omap_intr_handler_s, + DEFINE_PROP_UINT8("revision", OMAPIntcState, revision, 0x21), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap2_intc_info = { static const TypeInfo omap_intc_type_info = { .name = TYPE_OMAP_INTC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(omap_intr_handler), + .instance_size = sizeof(OMAPIntcState), .abstract = true, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_update(stellaris_adc_state *s) static void stellaris_adc_trigger(void *opaque, int irq, int level) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_reset(stellaris_adc_state *s) static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, unsigned size) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, static void stellaris_adc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename stellaris_adc_state -> StellarisADCState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 73 +++++++++++++++++++++++----------------------- 1 file changed, 36 insertions(+), 37 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj) #define STELLARIS_ADC_FIFO_FULL 0x1000 #define TYPE_STELLARIS_ADC "stellaris-adc" -typedef struct StellarisADCState stellaris_adc_state; -DECLARE_INSTANCE_CHECKER(stellaris_adc_state, STELLARIS_ADC, - TYPE_STELLARIS_ADC) +typedef struct StellarisADCState StellarisADCState; +DECLARE_INSTANCE_CHECKER(StellarisADCState, STELLARIS_ADC, TYPE_STELLARIS_ADC) struct StellarisADCState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct StellarisADCState { qemu_irq irq[4]; }; -static uint32_t stellaris_adc_fifo_read(stellaris_adc_state *s, int n) +static uint32_t stellaris_adc_fifo_read(StellarisADCState *s, int n) { int tail; @@ -XXX,XX +XXX,XX @@ static uint32_t stellaris_adc_fifo_read(stellaris_adc_state *s, int n) return s->fifo[n].data[tail]; } -static void stellaris_adc_fifo_write(stellaris_adc_state *s, int n, +static void stellaris_adc_fifo_write(StellarisADCState *s, int n, uint32_t value) { int head; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_fifo_write(stellaris_adc_state *s, int n, s->fifo[n].state |= STELLARIS_ADC_FIFO_FULL; } -static void stellaris_adc_update(stellaris_adc_state *s) +static void stellaris_adc_update(StellarisADCState *s) { int level; int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_update(stellaris_adc_state *s) static void stellaris_adc_trigger(void *opaque, int irq, int level) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset(stellaris_adc_state *s) +static void stellaris_adc_reset(StellarisADCState *s) { int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_reset(stellaris_adc_state *s) static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, unsigned size) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, static void stellaris_adc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_adc = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_UINT32(actss, stellaris_adc_state), - VMSTATE_UINT32(ris, stellaris_adc_state), - VMSTATE_UINT32(im, stellaris_adc_state), - VMSTATE_UINT32(emux, stellaris_adc_state), - VMSTATE_UINT32(ostat, stellaris_adc_state), - VMSTATE_UINT32(ustat, stellaris_adc_state), - VMSTATE_UINT32(sspri, stellaris_adc_state), - VMSTATE_UINT32(sac, stellaris_adc_state), - VMSTATE_UINT32(fifo[0].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[0].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[0], stellaris_adc_state), - VMSTATE_UINT32(ssctl[0], stellaris_adc_state), - VMSTATE_UINT32(fifo[1].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[1].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[1], stellaris_adc_state), - VMSTATE_UINT32(ssctl[1], stellaris_adc_state), - VMSTATE_UINT32(fifo[2].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[2].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[2], stellaris_adc_state), - VMSTATE_UINT32(ssctl[2], stellaris_adc_state), - VMSTATE_UINT32(fifo[3].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[3].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[3], stellaris_adc_state), - VMSTATE_UINT32(ssctl[3], stellaris_adc_state), - VMSTATE_UINT32(noise, stellaris_adc_state), + VMSTATE_UINT32(actss, StellarisADCState), + VMSTATE_UINT32(ris, StellarisADCState), + VMSTATE_UINT32(im, StellarisADCState), + VMSTATE_UINT32(emux, StellarisADCState), + VMSTATE_UINT32(ostat, StellarisADCState), + VMSTATE_UINT32(ustat, StellarisADCState), + VMSTATE_UINT32(sspri, StellarisADCState), + VMSTATE_UINT32(sac, StellarisADCState), + VMSTATE_UINT32(fifo[0].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[0].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[0], StellarisADCState), + VMSTATE_UINT32(ssctl[0], StellarisADCState), + VMSTATE_UINT32(fifo[1].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[1].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[1], StellarisADCState), + VMSTATE_UINT32(ssctl[1], StellarisADCState), + VMSTATE_UINT32(fifo[2].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[2].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[2], StellarisADCState), + VMSTATE_UINT32(ssctl[2], StellarisADCState), + VMSTATE_UINT32(fifo[3].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[3].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[3], StellarisADCState), + VMSTATE_UINT32(ssctl[3], StellarisADCState), + VMSTATE_UINT32(noise, StellarisADCState), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_adc = { static void stellaris_adc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - stellaris_adc_state *s = STELLARIS_ADC(obj); + StellarisADCState *s = STELLARIS_ADC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_class_init(ObjectClass *klass, void *data) static const TypeInfo stellaris_adc_info = { .name = TYPE_STELLARIS_ADC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(stellaris_adc_state), + .instance_size = sizeof(StellarisADCState), .instance_init = stellaris_adc_init, .class_init = stellaris_adc_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The typedef and definitions are generated by the OBJECT_DECLARE_TYPE macro in "hw/arm/bcm2836.h": 20 #define TYPE_BCM283X "bcm283x" 21 OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X) The script ran in commit a489d1951c ("Use OBJECT_DECLARE_TYPE when possible") missed them because they are declared in a different file unit. Remove them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" -typedef struct BCM283XClass { +struct BCM283XClass { /*< private >*/ DeviceClass parent_class; /*< public >*/ @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; -} BCM283XClass; - -#define BCM283X_CLASS(klass) \ - OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) -#define BCM283X_GET_CLASS(obj) \ - OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) +}; static Property bcm2836_enabled_cores_property = DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, 0); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/adc/npcm7xx_adc.h | 7 +++---- include/hw/arm/npcm7xx.h | 18 ++++++------------ include/hw/i2c/npcm7xx_smbus.h | 7 +++---- include/hw/misc/npcm7xx_clk.h | 2 +- include/hw/misc/npcm7xx_gcr.h | 6 +++--- include/hw/misc/npcm7xx_mft.h | 7 +++---- include/hw/misc/npcm7xx_pwm.h | 3 +-- include/hw/misc/npcm7xx_rng.h | 6 +++--- include/hw/net/npcm7xx_emc.h | 5 +---- include/hw/sd/npcm7xx_sdhci.h | 4 ++-- 10 files changed, 26 insertions(+), 39 deletions(-) diff --git a/include/hw/adc/npcm7xx_adc.h b/include/hw/adc/npcm7xx_adc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/adc/npcm7xx_adc.h +++ b/include/hw/adc/npcm7xx_adc.h @@ -XXX,XX +XXX,XX @@ * @iref: The internal reference voltage, initialized at launch time. * @rv: The calibrated output values of 0.5V and 1.5V for the ADC. */ -typedef struct { +struct NPCM7xxADCState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t iref; uint16_t calibration_r_values[NPCM7XX_ADC_NUM_CALIB]; -} NPCM7xxADCState; +}; #define TYPE_NPCM7XX_ADC "npcm7xx-adc" -#define NPCM7XX_ADC(obj) \ - OBJECT_CHECK(NPCM7xxADCState, (obj), TYPE_NPCM7XX_ADC) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxADCState, NPCM7XX_ADC) #endif /* NPCM7XX_ADC_H */ diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_NR_PWM_MODULES 2 -typedef struct NPCM7xxMachine { +struct NPCM7xxMachine { MachineState parent; /* * PWM fan splitter. each splitter connects to one PWM output and @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMachine { */ SplitIRQ fan_splitter[NPCM7XX_NR_PWM_MODULES * NPCM7XX_PWM_PER_MODULE]; -} NPCM7xxMachine; +}; #define TYPE_NPCM7XX_MACHINE MACHINE_TYPE_NAME("npcm7xx") -#define NPCM7XX_MACHINE(obj) \ - OBJECT_CHECK(NPCM7xxMachine, (obj), TYPE_NPCM7XX_MACHINE) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMachine, NPCM7XX_MACHINE) typedef struct NPCM7xxMachineClass { MachineClass parent; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMachineClass { #define NPCM7XX_MACHINE_GET_CLASS(obj) \ OBJECT_GET_CLASS(NPCM7xxMachineClass, (obj), TYPE_NPCM7XX_MACHINE) -typedef struct NPCM7xxState { +struct NPCM7xxState { DeviceState parent; ARMCPU cpu[NPCM7XX_MAX_NUM_CPUS]; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; -} NPCM7xxState; +}; #define TYPE_NPCM7XX "npcm7xx" -#define NPCM7XX(obj) OBJECT_CHECK(NPCM7xxState, (obj), TYPE_NPCM7XX) +OBJECT_DECLARE_TYPE(NPCM7xxState, NPCM7xxClass, NPCM7XX) #define TYPE_NPCM730 "npcm730" #define TYPE_NPCM750 "npcm750" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxClass { uint32_t num_cpus; } NPCM7xxClass; -#define NPCM7XX_CLASS(klass) \ - OBJECT_CLASS_CHECK(NPCM7xxClass, (klass), TYPE_NPCM7XX) -#define NPCM7XX_GET_CLASS(obj) \ - OBJECT_GET_CLASS(NPCM7xxClass, (obj), TYPE_NPCM7XX) - /** * npcm7xx_load_kernel - Loads memory with everything needed to boot * @machine - The machine containing the SoC to be booted. diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/npcm7xx_smbus.h +++ b/include/hw/i2c/npcm7xx_smbus.h @@ -XXX,XX +XXX,XX @@ typedef enum NPCM7xxSMBusStatus { * @rx_cur: The current position of rx_fifo. * @status: The current status of the SMBus. */ -typedef struct NPCM7xxSMBusState { +struct NPCM7xxSMBusState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSMBusState { uint8_t rx_cur; NPCM7xxSMBusStatus status; -} NPCM7xxSMBusState; +}; #define TYPE_NPCM7XX_SMBUS "npcm7xx-smbus" -#define NPCM7XX_SMBUS(obj) OBJECT_CHECK(NPCM7xxSMBusState, (obj), \ - TYPE_NPCM7XX_SMBUS) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxSMBusState, NPCM7XX_SMBUS) #endif /* NPCM7XX_SMBUS_H */ diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm7xx_clk.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxCLKState { }; #define TYPE_NPCM7XX_CLK "npcm7xx-clk" -#define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxCLKState, NPCM7XX_CLK) #endif /* NPCM7XX_CLK_H */ diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm7xx_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_gcr.h +++ b/include/hw/misc/npcm7xx_gcr.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_GCR_NR_REGS (0x148 / sizeof(uint32_t)) -typedef struct NPCM7xxGCRState { +struct NPCM7xxGCRState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxGCRState { uint32_t reset_pwron; uint32_t reset_mdlr; uint32_t reset_intcr3; -} NPCM7xxGCRState; +}; #define TYPE_NPCM7XX_GCR "npcm7xx-gcr" -#define NPCM7XX_GCR(obj) OBJECT_CHECK(NPCM7xxGCRState, (obj), TYPE_NPCM7XX_GCR) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxGCRState, NPCM7XX_GCR) #endif /* NPCM7XX_GCR_H */ diff --git a/include/hw/misc/npcm7xx_mft.h b/include/hw/misc/npcm7xx_mft.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_mft.h +++ b/include/hw/misc/npcm7xx_mft.h @@ -XXX,XX +XXX,XX @@ * @max_rpm: The maximum rpm for fans. Order: A0, B0, A1, B1. * @duty: The duty cycles for fans, relative to NPCM7XX_PWM_MAX_DUTY. */ -typedef struct NPCM7xxMFTState { +struct NPCM7xxMFTState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMFTState { uint32_t max_rpm[NPCM7XX_MFT_FANIN_COUNT]; uint32_t duty[NPCM7XX_MFT_FANIN_COUNT]; -} NPCM7xxMFTState; +}; #define TYPE_NPCM7XX_MFT "npcm7xx-mft" -#define NPCM7XX_MFT(obj) \ - OBJECT_CHECK(NPCM7xxMFTState, (obj), TYPE_NPCM7XX_MFT) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMFTState, NPCM7XX_MFT) #endif /* NPCM7XX_MFT_H */ diff --git a/include/hw/misc/npcm7xx_pwm.h b/include/hw/misc/npcm7xx_pwm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_pwm.h +++ b/include/hw/misc/npcm7xx_pwm.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxPWMState { }; #define TYPE_NPCM7XX_PWM "npcm7xx-pwm" -#define NPCM7XX_PWM(obj) \ - OBJECT_CHECK(NPCM7xxPWMState, (obj), TYPE_NPCM7XX_PWM) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxPWMState, NPCM7XX_PWM) #endif /* NPCM7XX_PWM_H */ diff --git a/include/hw/misc/npcm7xx_rng.h b/include/hw/misc/npcm7xx_rng.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_rng.h +++ b/include/hw/misc/npcm7xx_rng.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" -typedef struct NPCM7xxRNGState { +struct NPCM7xxRNGState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxRNGState { uint8_t rngcs; uint8_t rngd; uint8_t rngmode; -} NPCM7xxRNGState; +}; #define TYPE_NPCM7XX_RNG "npcm7xx-rng" -#define NPCM7XX_RNG(obj) OBJECT_CHECK(NPCM7xxRNGState, (obj), TYPE_NPCM7XX_RNG) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxRNGState, NPCM7XX_RNG) #endif /* NPCM7XX_RNG_H */ diff --git a/include/hw/net/npcm7xx_emc.h b/include/hw/net/npcm7xx_emc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/npcm7xx_emc.h +++ b/include/hw/net/npcm7xx_emc.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxEMCState { bool rx_active; }; -typedef struct NPCM7xxEMCState NPCM7xxEMCState; - #define TYPE_NPCM7XX_EMC "npcm7xx-emc" -#define NPCM7XX_EMC(obj) \ - OBJECT_CHECK(NPCM7xxEMCState, (obj), TYPE_NPCM7XX_EMC) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxEMCState, NPCM7XX_EMC) #endif /* NPCM7XX_EMC_H */ diff --git a/include/hw/sd/npcm7xx_sdhci.h b/include/hw/sd/npcm7xx_sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/npcm7xx_sdhci.h +++ b/include/hw/sd/npcm7xx_sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxRegs { uint32_t boottoctrl; } NPCM7xxRegisters; -typedef struct NPCM7xxSDHCIState { +struct NPCM7xxSDHCIState { SysBusDevice parent; MemoryRegion container; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSDHCIState { NPCM7xxRegisters regs; SDHCIState sdhci; -} NPCM7xxSDHCIState; +}; #endif /* NPCM7XX_SDHCI_H */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The structure is named SECUREECState. Rename the type accordingly. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/sbsa_ec.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/hw/misc/sbsa_ec.c b/hw/misc/sbsa_ec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sbsa_ec.c +++ b/hw/misc/sbsa_ec.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "sysemu/runstate.h" -typedef struct { +typedef struct SECUREECState { SysBusDevice parent_obj; MemoryRegion iomem; } SECUREECState; -#define TYPE_SBSA_EC "sbsa-ec" -#define SECURE_EC(obj) OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_EC) +#define TYPE_SBSA_SECURE_EC "sbsa-ec" +#define SBSA_SECURE_EC(obj) \ + OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_SECURE_EC) enum sbsa_ec_powerstates { SBSA_EC_CMD_POWEROFF = 0x01, @@ -XXX,XX +XXX,XX @@ static uint64_t sbsa_ec_read(void *opaque, hwaddr offset, unsigned size) } static void sbsa_ec_write(void *opaque, hwaddr offset, - uint64_t value, unsigned size) + uint64_t value, unsigned size) { if (offset == 0) { /* PSCI machine power command register */ switch (value) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps sbsa_ec_ops = { static void sbsa_ec_init(Object *obj) { - SECUREECState *s = SECURE_EC(obj); + SECUREECState *s = SBSA_SECURE_EC(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); memory_region_init_io(&s->iomem, obj, &sbsa_ec_ops, s, "sbsa-ec", @@ -XXX,XX +XXX,XX @@ static void sbsa_ec_class_init(ObjectClass *klass, void *data) } static const TypeInfo sbsa_ec_info = { - .name = TYPE_SBSA_EC, + .name = TYPE_SBSA_SECURE_EC, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(SECUREECState), .instance_init = sbsa_ec_init, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This model was merged few days before the QOM cleanup from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible") was pulled and merged. Manually adapt. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/sbsa_ec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/misc/sbsa_ec.c b/hw/misc/sbsa_ec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sbsa_ec.c +++ b/hw/misc/sbsa_ec.c @@ -XXX,XX +XXX,XX @@ typedef struct SECUREECState { } SECUREECState; #define TYPE_SBSA_SECURE_EC "sbsa-ec" -#define SBSA_SECURE_EC(obj) \ - OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_SECURE_EC) +OBJECT_DECLARE_SIMPLE_TYPE(SECUREECState, SBSA_SECURE_EC) enum sbsa_ec_powerstates { SBSA_EC_CMD_POWEROFF = 0x01, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call, to avoid after a QOM refactor: hw/intc/xilinx_intc.c:45:1: error: declaration of anonymous struct must be a definition DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC, ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Message-id: 20230109140306.23161-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/xilinx_intc.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/hw/intc/xilinx_intc.c b/hw/intc/xilinx_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/xilinx_intc.c +++ b/hw/intc/xilinx_intc.c @@ -XXX,XX +XXX,XX @@ #define R_MAX 8 #define TYPE_XILINX_INTC "xlnx.xps-intc" -DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC, - TYPE_XILINX_INTC) +typedef struct XpsIntc XpsIntc; +DECLARE_INSTANCE_CHECKER(XpsIntc, XILINX_INTC, TYPE_XILINX_INTC) -struct xlx_pic +struct XpsIntc { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct xlx_pic uint32_t irq_pin_state; }; -static void update_irq(struct xlx_pic *p) +static void update_irq(XpsIntc *p) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void update_irq(struct xlx_pic *p) qemu_set_irq(p->parent_irq, (p->regs[R_MER] & 1) && p->regs[R_IPR]); } -static uint64_t -pic_read(void *opaque, hwaddr addr, unsigned int size) +static uint64_t pic_read(void *opaque, hwaddr addr, unsigned int size) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; uint32_t r = 0; addr >>= 2; @@ -XXX,XX +XXX,XX @@ pic_read(void *opaque, hwaddr addr, unsigned int size) return r; } -static void -pic_write(void *opaque, hwaddr addr, - uint64_t val64, unsigned int size) +static void pic_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; uint32_t value = val64; addr >>= 2; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps pic_ops = { static void irq_handler(void *opaque, int irq, int level) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; /* edge triggered interrupt */ if (p->c_kind_of_intr & (1 << irq) && p->regs[R_MER] & 2) { @@ -XXX,XX +XXX,XX @@ static void irq_handler(void *opaque, int irq, int level) static void xilinx_intc_init(Object *obj) { - struct xlx_pic *p = XILINX_INTC(obj); + XpsIntc *p = XILINX_INTC(obj); qdev_init_gpio_in(DEVICE(obj), irq_handler, 32); sysbus_init_irq(SYS_BUS_DEVICE(obj), &p->parent_irq); @@ -XXX,XX +XXX,XX @@ static void xilinx_intc_init(Object *obj) } static Property xilinx_intc_properties[] = { - DEFINE_PROP_UINT32("kind-of-intr", struct xlx_pic, c_kind_of_intr, 0), + DEFINE_PROP_UINT32("kind-of-intr", XpsIntc, c_kind_of_intr, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void xilinx_intc_class_init(ObjectClass *klass, void *data) static const TypeInfo xilinx_intc_info = { .name = TYPE_XILINX_INTC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct xlx_pic), + .instance_size = sizeof(XpsIntc), .instance_init = xilinx_intc_init, .class_init = xilinx_intc_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call, to avoid after a QOM refactor: hw/timer/xilinx_timer.c:65:1: error: declaration of anonymous struct must be a definition DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER, ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Message-id: 20230109140306.23161-15-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/xilinx_timer.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xilinx_timer.c +++ b/hw/timer/xilinx_timer.c @@ -XXX,XX +XXX,XX @@ struct xlx_timer }; #define TYPE_XILINX_TIMER "xlnx.xps-timer" -DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER, - TYPE_XILINX_TIMER) +typedef struct XpsTimerState XpsTimerState; +DECLARE_INSTANCE_CHECKER(XpsTimerState, XILINX_TIMER, TYPE_XILINX_TIMER) -struct timerblock +struct XpsTimerState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct timerblock struct xlx_timer *timers; }; -static inline unsigned int num_timers(struct timerblock *t) +static inline unsigned int num_timers(XpsTimerState *t) { return 2 - t->one_timer_only; } @@ -XXX,XX +XXX,XX @@ static inline unsigned int timer_from_addr(hwaddr addr) return addr >> 2; } -static void timer_update_irq(struct timerblock *t) +static void timer_update_irq(XpsTimerState *t) { unsigned int i, irq = 0; uint32_t csr; @@ -XXX,XX +XXX,XX @@ static void timer_update_irq(struct timerblock *t) static uint64_t timer_read(void *opaque, hwaddr addr, unsigned int size) { - struct timerblock *t = opaque; + XpsTimerState *t = opaque; struct xlx_timer *xt; uint32_t r = 0; unsigned int timer; @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, uint64_t val64, unsigned int size) { - struct timerblock *t = opaque; + XpsTimerState *t = opaque; struct xlx_timer *xt; unsigned int timer; uint32_t value = val64; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps timer_ops = { static void timer_hit(void *opaque) { struct xlx_timer *xt = opaque; - struct timerblock *t = xt->parent; + XpsTimerState *t = xt->parent; D(fprintf(stderr, "%s %d\n", __func__, xt->nr)); xt->regs[R_TCSR] |= TCSR_TINT; @@ -XXX,XX +XXX,XX @@ static void timer_hit(void *opaque) static void xilinx_timer_realize(DeviceState *dev, Error **errp) { - struct timerblock *t = XILINX_TIMER(dev); + XpsTimerState *t = XILINX_TIMER(dev); unsigned int i; /* Init all the ptimers. */ @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_realize(DeviceState *dev, Error **errp) static void xilinx_timer_init(Object *obj) { - struct timerblock *t = XILINX_TIMER(obj); + XpsTimerState *t = XILINX_TIMER(obj); /* All timers share a single irq line. */ sysbus_init_irq(SYS_BUS_DEVICE(obj), &t->irq); } static Property xilinx_timer_properties[] = { - DEFINE_PROP_UINT32("clock-frequency", struct timerblock, freq_hz, - 62 * 1000000), - DEFINE_PROP_UINT8("one-timer-only", struct timerblock, one_timer_only, 0), + DEFINE_PROP_UINT32("clock-frequency", XpsTimerState, freq_hz, 62 * 1000000), + DEFINE_PROP_UINT8("one-timer-only", XpsTimerState, one_timer_only, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo xilinx_timer_info = { .name = TYPE_XILINX_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct timerblock), + .instance_size = sizeof(XpsTimerState), .instance_init = xilinx_timer_init, .class_init = xilinx_timer_class_init, }; -- 2.34.1 From: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> ARM trusted firmware, when built with FEAT_HCX support, sets SCR_EL3.HXEn bit to allow EL2 to modify HCRX_EL2 register without trapping it in EL3. Qemu uses a valid mask to clear unsupported SCR_EL3 bits when emulating SCR_EL3 write, and that mask doesn't include SCR_EL3.HXEn bit even if FEAT_HCX is enabled and exposed to the guest. As a result EL3 writes of that bit are ignored. Cc: qemu-stable@nongnu.org Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Message-id: 20230105221251.17896-4-eiakovlev@linux.microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_sme, cpu)) { valid_mask |= SCR_ENTP2; } + if (cpu_isar_feature(aa64_hcx, cpu)) { + valid_mask |= SCR_HXEN; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { -- 2.34.1