ARM pullreq; contains some patches that arrived while I was on holiday, plus the series I sent off before going away, which got reviewed while I was away. thanks -- PMM The following changes since commit c077a998eb3fcae2d048e3baeb5bc592d30fddde: Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20170531' into staging (2017-06-01 15:50:40 +0100) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170601 for you to fetch changes up to cdc58be430b0bdeaef282e2e70f8135ae531616d: hw/arm/virt: fdt: generate distance-map when needed (2017-06-01 17:27:07 +0100) ---------------------------------------------------------------- target-arm queue: * virt: numa: provide ACPI distance info when needed * aspeed: fix i2c controller bugs * aspeed: add temperature sensor device * M profile: support MPU * gicv3: fix mishandling of BPR1, VBPR1 * load_uboot_image: don't assume a full header read * libvixl: Correct build failures on NetBSD ---------------------------------------------------------------- Andrew Jones (3): load_uboot_image: don't assume a full header read hw/arm/virt-acpi-build: build SLIT when needed hw/arm/virt: fdt: generate distance-map when needed Cédric Le Goater (6): aspeed/i2c: improve command handling aspeed/i2c: handle LAST command under the RX command aspeed/i2c: introduce a state machine aspeed: add some I2C devices to the Aspeed machines hw/misc: add a TMP42{1,2,3} device model aspeed: add a temp sensor device on I2C bus 3 Kamil Rytarowski (1): libvixl: Correct build failures on NetBSD Michael Davidsaver (4): armv7m: Improve "-d mmu" tracing for PMSAv7 MPU armv7m: Implement M profile default memory map armv7m: Classify faults as MemManage or BusFault arm: add MPU support to M profile CPUs Peter Maydell (12): hw/intc/arm_gicv3_cpuif: Fix reset value for VMCR_EL2.VBPR1 hw/intc/arm_gicv3_cpuif: Don't let BPR be set below its minimum hw/intc/arm_gicv3_cpuif: Fix priority masking for NS BPR1 arm: Use the mmu_idx we're passed in arm_cpu_do_unaligned_access() arm: Add support for M profile CPUs having different MMU index semantics arm: Use different ARMMMUIdx values for M profile arm: Clean up handling of no-MPU PMSA CPUs arm: Don't clear ARM_FEATURE_PMSA for no-mpu configs arm: Don't let no-MPU PMSA cores write to SCTLR.M arm: Remove unnecessary check on cpu->pmsav7_dregion arm: All M profile cores are PMSA arm: Implement HFNMIENA support for M profile MPU Wei Huang (1): target/arm: clear PMUVER field of AA64DFR0 when vPMU=off disas/libvixl/Makefile.objs | 3 + hw/misc/Makefile.objs | 1 + target/arm/cpu.h | 118 ++++++++++-- target/arm/translate.h | 2 +- hw/arm/aspeed.c | 36 ++++ hw/arm/virt-acpi-build.c | 4 + hw/arm/virt.c | 21 +++ hw/core/loader.c | 3 +- hw/i2c/aspeed_i2c.c | 65 ++++++- hw/intc/arm_gicv3_cpuif.c | 50 ++++- hw/intc/armv7m_nvic.c | 104 +++++++++++ hw/misc/tmp421.c | 401 ++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 28 ++- target/arm/helper.c | 338 ++++++++++++++++++++++----------- target/arm/machine.c | 7 +- target/arm/op_helper.c | 3 +- target/arm/translate-a64.c | 18 +- target/arm/translate.c | 14 +- default-configs/arm-softmmu.mak | 1 + 19 files changed, 1060 insertions(+), 157 deletions(-) create mode 100644 hw/misc/tmp421.c From: Kamil Rytarowski <n54@gmx.com> Ensure that C99 macros are defined regardless of the inclusion order of headers in vixl. This is required at least on NetBSD. The vixl/globals.h headers defines __STDC_CONSTANT_MACROS and must be included before other system headers. This file defines unconditionally the following macros, without altering the original sources: - __STDC_CONSTANT_MACROS - __STDC_LIMIT_MACROS - __STDC_FORMAT_MACROS Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170514051820.15985-1-n54@gmx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- disas/libvixl/Makefile.objs | 3 +++ 1 file changed, 3 insertions(+) diff --git a/disas/libvixl/Makefile.objs b/disas/libvixl/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/disas/libvixl/Makefile.objs +++ b/disas/libvixl/Makefile.objs @@ -XXX,XX +XXX,XX @@ libvixl_OBJS = vixl/utils.o \ # The -Wno-sign-compare is needed only for gcc 4.6, which complains about # some signed-unsigned equality comparisons which later gcc versions do not. $(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CFLAGS := -I$(SRC_PATH)/disas/libvixl $(QEMU_CFLAGS) -Wno-sign-compare +# Ensure that C99 macros are defined regardless of the inclusion order of +# headers in vixl. This is required at least on NetBSD. +$(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CFLAGS += -D__STDC_CONSTANT_MACROS -D__STDC_LIMIT_MACROS -D__STDC_FORMAT_MACROS common-obj-$(CONFIG_ARM_A64_DIS) += $(libvixl_OBJS) -- 2.7.4 From: Andrew Jones <drjones@redhat.com> Don't allow load_uboot_image() to proceed when less bytes than header-size was read. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20170524091315.20284-1-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/loader.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ static int load_uboot_image(const char *filename, hwaddr *ep, hwaddr *loadaddr, return -1; size = read(fd, hdr, sizeof(uboot_image_header_t)); - if (size < 0) + if (size < sizeof(uboot_image_header_t)) { goto out; + } bswap_uboot_header(hdr); -- 2.7.4 We were setting the VBPR1 field of VMCR_EL2 to icv_min_vbpr() on reset, but this is not correct. The field should reset to the minimum value of ICV_BPR0_EL1 plus one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493226792-3237-2-git-send-email-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) cs->ich_hcr_el2 = 0; memset(cs->ich_lr_el2, 0, sizeof(cs->ich_lr_el2)); cs->ich_vmcr_el2 = ICH_VMCR_EL2_VFIQEN | - (icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR1_SHIFT) | + ((icv_min_vbpr(cs) + 1) << ICH_VMCR_EL2_VBPR1_SHIFT) | (icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR0_SHIFT); } -- 2.7.4 icc_bpr_write() was not enforcing that writing a value below the minimum for the BPR should behave as if the BPR was set to the minimum value. This doesn't make a difference for the secure BPRs (since we define the minimum for the QEMU implementation as zero) but did mean we were allowing the NS BPR1 to be set to 0 when 1 should be the lowest value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493226792-3237-3-git-send-email-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void icc_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri, { GICv3CPUState *cs = icc_cs_from_env(env); int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1; + uint64_t minval; if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) { icv_bpr_write(env, ri, value); @@ -XXX,XX +XXX,XX @@ static void icc_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri, return; } + minval = (grp == GICV3_G1NS) ? GIC_MIN_BPR_NS : GIC_MIN_BPR; + if (value < minval) { + value = minval; + } + cs->icc_bpr[grp] = value & 7; gicv3_cpuif_update(cs); } -- 2.7.4 When we calculate the mask to use to get the group priority from an interrupt priority, the way that NS BPR1 is handled differs from how BPR0 and S BPR1 work -- a BPR1 value of 1 means the group priority is in bits [7:1], whereas for BPR0 and S BPR1 this is indicated by a 0 BPR value. Subtract 1 from the BPR value before creating the mask if we're using the NS BPR value, for both hardware and virtual interrupts, as the GICv3 pseudocode does, and fix the comments accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493226792-3237-4-git-send-email-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 42 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 4 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static uint32_t icv_gprio_mask(GICv3CPUState *cs, int group) { /* Return a mask word which clears the subpriority bits from * a priority value for a virtual interrupt in the specified group. - * This depends on the VBPR value: + * This depends on the VBPR value. + * If using VBPR0 then: * a BPR of 0 means the group priority bits are [7:1]; * a BPR of 1 means they are [7:2], and so on down to * a BPR of 7 meaning no group priority bits at all. + * If using VBPR1 then: + * a BPR of 0 is impossible (the minimum value is 1) + * a BPR of 1 means the group priority bits are [7:1]; + * a BPR of 2 means they are [7:2], and so on down to + * a BPR of 7 meaning the group priority is [7]. + * * Which BPR to use depends on the group of the interrupt and * the current ICH_VMCR_EL2.VCBPR settings. + * + * This corresponds to the VGroupBits() pseudocode. */ + int bpr; + if (group == GICV3_G1NS && cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR) { group = GICV3_G0; } - return ~0U << (read_vbpr(cs, group) + 1); + bpr = read_vbpr(cs, group); + if (group == GICV3_G1NS) { + assert(bpr > 0); + bpr--; + } + + return ~0U << (bpr + 1); } static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) @@ -XXX,XX +XXX,XX @@ static uint32_t icc_gprio_mask(GICv3CPUState *cs, int group) { /* Return a mask word which clears the subpriority bits from * a priority value for an interrupt in the specified group. - * This depends on the BPR value: + * This depends on the BPR value. For CBPR0 (S or NS): * a BPR of 0 means the group priority bits are [7:1]; * a BPR of 1 means they are [7:2], and so on down to * a BPR of 7 meaning no group priority bits at all. + * For CBPR1 NS: + * a BPR of 0 is impossible (the minimum value is 1) + * a BPR of 1 means the group priority bits are [7:1]; + * a BPR of 2 means they are [7:2], and so on down to + * a BPR of 7 meaning the group priority is [7]. + * * Which BPR to use depends on the group of the interrupt and * the current ICC_CTLR.CBPR settings. + * + * This corresponds to the GroupBits() pseudocode. */ + int bpr; + if ((group == GICV3_G1 && cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR) || (group == GICV3_G1NS && cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) { group = GICV3_G0; } - return ~0U << ((cs->icc_bpr[group] & 7) + 1); + bpr = cs->icc_bpr[group] & 7; + + if (group == GICV3_G1NS) { + assert(bpr > 0); + bpr--; + } + + return ~0U << (bpr + 1); } static bool icc_no_enabled_hppi(GICv3CPUState *cs) -- 2.7.4 From: Wei Huang <wei@redhat.com> The PMUv3 driver of linux kernel (in arch/arm64/kernel/perf_event.c) relies on the PMUVER field of id_aa64dfr0_el1 to decide if PMU support is present or not. This patch clears the PMUVER field under TCG mode when vPMU=off. Without it, PMUv3 will init insider guest VMs even with vPMU=off. This patch also removes a redundant line inside the if-statement. Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1495123889-32301-1-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (!cpu->has_pmu) { - cpu->has_pmu = false; unset_feature(env, ARM_FEATURE_PMU); + cpu->id_aa64dfr0 &= ~0xf00; } if (!arm_feature(env, ARM_FEATURE_EL2)) { -- 2.7.4 When identifying the DFSR format for an alignment fault, use the mmu index that we are passed, rather than calling cpu_mmu_index() to get the mmu index for the current CPU state. This doesn't actually make any difference since the only cases where the current MMU index differs from the index used for the load are the "unprivileged load/store" instructions, and in that case the mmu index may differ but the translation regime is the same (apart from the "use from Hyp mode" case which is UNPREDICTABLE). However it's the more logical thing to do. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-2-git-send-email-peter.maydell@linaro.org --- target/arm/op_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, /* the DFSR for an alignment fault depends on whether we're using * the LPAE long descriptor format, or the short descriptor format */ - if (arm_s1_regime_using_lpae_format(env, cpu_mmu_index(env, false))) { + if (arm_s1_regime_using_lpae_format(env, mmu_idx)) { env->exception.fsr = (1 << 9) | 0x21; } else { env->exception.fsr = 0x1; -- 2.7.4 The M profile CPU's MPU has an awkward corner case which we would like to implement with a different MMU index. We can avoid having to bump the number of MMU modes ARM uses, because some of our existing MMU indexes are only used by non-M-profile CPUs, so we can borrow one. To avoid that getting too confusing, clean up the code to try to keep the two meanings of the index separate. Instead of ARMMMUIdx enum values being identical to core QEMU MMU index values, they are now the core index values with some high bits set. Any particular CPU always uses the same high bits (so eventually A profile cores and M profile cores will use different bits). New functions arm_to_core_mmu_idx() and core_to_arm_mmu_idx() convert between the two. In general core index values are stored in 'int' types, and ARM values are stored in ARMMMUIdx types. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1493122030-32191-3-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 71 ++++++++++++++++----- target/arm/translate.h | 2 +- target/arm/helper.c | 151 ++++++++++++++++++++++++--------------------- target/arm/op_helper.c | 3 +- target/arm/translate-a64.c | 18 ++++-- target/arm/translate.c | 10 +-- 6 files changed, 156 insertions(+), 99 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * for the accesses done as part of a stage 1 page table walk, rather than * having to walk the stage 2 page table over and over.) * + * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code + * are not quite the same -- different CPU types (most notably M profile + * vs A/R profile) would like to use MMU indexes with different semantics, + * but since we don't ever need to use all of those in a single CPU we + * can avoid setting NB_MMU_MODES to more than 8. The lower bits of + * ARMMMUIdx are the core TLB mmu index, and the higher bits are always + * the same for any particular CPU. + * Variables of type ARMMUIdx are always full values, and the core + * index values are in variables of type 'int'. + * * Our enumeration includes at the end some entries which are not "true" * mmu_idx values in that they don't have corresponding TLBs and are only * valid for doing slow path page table walks. @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * of the AT/ATS operations. * The values used are carefully arranged to make mmu_idx => EL lookup easy. */ +#define ARM_MMU_IDX_A 0x10 /* A profile (and M profile, for the moment) */ +#define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */ + +#define ARM_MMU_IDX_TYPE_MASK (~0x7) +#define ARM_MMU_IDX_COREIDX_MASK 0x7 + typedef enum ARMMMUIdx { - ARMMMUIdx_S12NSE0 = 0, - ARMMMUIdx_S12NSE1 = 1, - ARMMMUIdx_S1E2 = 2, - ARMMMUIdx_S1E3 = 3, - ARMMMUIdx_S1SE0 = 4, - ARMMMUIdx_S1SE1 = 5, - ARMMMUIdx_S2NS = 6, + ARMMMUIdx_S12NSE0 = 0 | ARM_MMU_IDX_A, + ARMMMUIdx_S12NSE1 = 1 | ARM_MMU_IDX_A, + ARMMMUIdx_S1E2 = 2 | ARM_MMU_IDX_A, + ARMMMUIdx_S1E3 = 3 | ARM_MMU_IDX_A, + ARMMMUIdx_S1SE0 = 4 | ARM_MMU_IDX_A, + ARMMMUIdx_S1SE1 = 5 | ARM_MMU_IDX_A, + ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A, /* Indexes below here don't have TLBs and are used only for AT system * instructions or for the first stage of an S12 page table walk. */ - ARMMMUIdx_S1NSE0 = 7, - ARMMMUIdx_S1NSE1 = 8, + ARMMMUIdx_S1NSE0 = 0 | ARM_MMU_IDX_NOTLB, + ARMMMUIdx_S1NSE1 = 1 | ARM_MMU_IDX_NOTLB, } ARMMMUIdx; +/* Bit macros for the core-mmu-index values for each index, + * for use when calling tlb_flush_by_mmuidx() and friends. + */ +typedef enum ARMMMUIdxBit { + ARMMMUIdxBit_S12NSE0 = 1 << 0, + ARMMMUIdxBit_S12NSE1 = 1 << 1, + ARMMMUIdxBit_S1E2 = 1 << 2, + ARMMMUIdxBit_S1E3 = 1 << 3, + ARMMMUIdxBit_S1SE0 = 1 << 4, + ARMMMUIdxBit_S1SE1 = 1 << 5, + ARMMMUIdxBit_S2NS = 1 << 6, +} ARMMMUIdxBit; + #define MMU_USER_IDX 0 +static inline int arm_to_core_mmu_idx(ARMMMUIdx mmu_idx) +{ + return mmu_idx & ARM_MMU_IDX_COREIDX_MASK; +} + +static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) +{ + return mmu_idx | ARM_MMU_IDX_A; +} + /* Return the exception level we're running at if this is our mmu_idx */ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) { - assert(mmu_idx < ARMMMUIdx_S2NS); - return mmu_idx & 3; + switch (mmu_idx & ARM_MMU_IDX_TYPE_MASK) { + case ARM_MMU_IDX_A: + return mmu_idx & 3; + default: + g_assert_not_reached(); + } } /* Determine the current mmu_idx to use for normal loads/stores */ @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) int el = arm_current_el(env); if (el < 2 && arm_is_secure_below_el3(env)) { - return ARMMMUIdx_S1SE0 + el; + return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0 + el); } return el; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx) static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *flags) { - ARMMMUIdx mmu_idx = cpu_mmu_index(env, false); + ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); if (is_a64(env)) { *pc = env->pc; *flags = ARM_TBFLAG_AARCH64_STATE_MASK; @@ -XXX,XX +XXX,XX @@ static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, << ARM_TBFLAG_XSCALE_CPAR_SHIFT); } - *flags |= (mmu_idx << ARM_TBFLAG_MMUIDX_SHIFT); + *flags |= (arm_to_core_mmu_idx(mmu_idx) << ARM_TBFLAG_MMUIDX_SHIFT); /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine * states defined in the ARM ARM for software singlestep: diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline int arm_dc_feature(DisasContext *dc, int feature) static inline int get_mem_index(DisasContext *s) { - return s->mmu_idx; + return arm_to_core_mmu_idx(s->mmu_idx); } /* Function used to determine the target exception EL when otherwise not known diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void tlbiall_nsnh_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = ENV_GET_CPU(env); tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } static void tlbiall_nsnh_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiall_nsnh_is_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = ENV_GET_CPU(env); tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } static void tlbiipas2_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiipas2_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 40); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S2NS)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S2NS); } static void tlbiipas2_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiipas2_is_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 40); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S2NS); } static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_S1E2); } static void tlbiall_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiall_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx_all_cpus_synced(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_S1E2); } static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = ENV_GET_CPU(env); uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S1E2)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S1E2); } static void tlbimva_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbimva_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1E2)); + ARMMMUIdxBit_S1E2); } static const ARMCPRegInfo cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Accesses to VTTBR may change the VMID so we must flush the TLB. */ if (raw_read(env, ri) != value) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); raw_write(env, ri, value); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vmalle1_write(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_is_secure_below_el3(env)) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vmalle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, if (sec) { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle1_write(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_is_secure_below_el3(env)) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { if (arm_feature(env, ARM_FEATURE_EL2)) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } else { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle2_write(CPUARMState *env, const ARMCPRegInfo *ri, ARMCPU *cpu = arm_env_get_cpu(env); CPUState *cs = CPU(cpu); - tlb_flush_by_mmuidx(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_S1E2); } static void tlbi_aa64_alle3_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle3_write(CPUARMState *env, const ARMCPRegInfo *ri, ARMCPU *cpu = arm_env_get_cpu(env); CPUState *cs = CPU(cpu); - tlb_flush_by_mmuidx(cs, (1 << ARMMMUIdx_S1E3)); + tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_S1E3); } static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, if (sec) { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else if (has_el2) { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } else { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle2is_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx_all_cpus_synced(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_S1E2); } static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx_all_cpus_synced(cs, (1 << ARMMMUIdx_S1E3)); + tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_S1E3); } static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_is_secure_below_el3(env)) { tlb_flush_page_by_mmuidx(cs, pageaddr, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_page_by_mmuidx(cs, pageaddr, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = CPU(cpu); uint64_t pageaddr = sextract64(value << 12, 0, 56); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S1E2)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S1E2); } static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = CPU(cpu); uint64_t pageaddr = sextract64(value << 12, 0, 56); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S1E3)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S1E3); } static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, if (sec) { tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2is_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t pageaddr = sextract64(value << 12, 0, 56); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1E2)); + ARMMMUIdxBit_S1E2); } static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t pageaddr = sextract64(value << 12, 0, 56); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1E3)); + ARMMMUIdxBit_S1E3); } static void tlbi_aa64_ipas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_ipas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 48); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S2NS)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S2NS); } static void tlbi_aa64_ipas2e1is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_ipas2e1is_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 48); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S2NS); } static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static inline TCR *regime_tcr(CPUARMState *env, ARMMMUIdx mmu_idx) return &env->cp15.tcr_el[regime_el(env, mmu_idx)]; } +/* Convert a possible stage1+2 MMU index into the appropriate + * stage 1 MMU index + */ +static inline ARMMMUIdx stage_1_mmu_idx(ARMMMUIdx mmu_idx) +{ + if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { + mmu_idx += (ARMMMUIdx_S1NSE0 - ARMMMUIdx_S12NSE0); + } + return mmu_idx; +} + /* Returns TBI0 value for current regime el */ uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx) { @@ -XXX,XX +XXX,XX @@ uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx) uint32_t el; /* For EL0 and EL1, TBI is controlled by stage 1's TCR, so convert - * a stage 1+2 mmu index into the appropriate stage 1 mmu index. - */ - if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { - mmu_idx += ARMMMUIdx_S1NSE0; - } + * a stage 1+2 mmu index into the appropriate stage 1 mmu index. + */ + mmu_idx = stage_1_mmu_idx(mmu_idx); tcr = regime_tcr(env, mmu_idx); el = regime_el(env, mmu_idx); @@ -XXX,XX +XXX,XX @@ uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx) uint32_t el; /* For EL0 and EL1, TBI is controlled by stage 1's TCR, so convert - * a stage 1+2 mmu index into the appropriate stage 1 mmu index. - */ - if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { - mmu_idx += ARMMMUIdx_S1NSE0; - } + * a stage 1+2 mmu index into the appropriate stage 1 mmu index. + */ + mmu_idx = stage_1_mmu_idx(mmu_idx); tcr = regime_tcr(env, mmu_idx); el = regime_el(env, mmu_idx); @@ -XXX,XX +XXX,XX @@ static inline bool regime_using_lpae_format(CPUARMState *env, * on whether the long or short descriptor format is in use. */ bool arm_s1_regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx) { - if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { - mmu_idx += ARMMMUIdx_S1NSE0; - } + mmu_idx = stage_1_mmu_idx(mmu_idx); return regime_using_lpae_format(env, mmu_idx); } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, int ret; ret = get_phys_addr(env, address, access_type, - mmu_idx + ARMMMUIdx_S1NSE0, &ipa, attrs, + stage_1_mmu_idx(mmu_idx), &ipa, attrs, prot, page_size, fsr, fi); /* If S1 fails or S2 is disabled, return early. */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, /* * For non-EL2 CPUs a stage1+stage2 translation is just stage 1. */ - mmu_idx += ARMMMUIdx_S1NSE0; + mmu_idx = stage_1_mmu_idx(mmu_idx); } } @@ -XXX,XX +XXX,XX @@ bool arm_tlb_fill(CPUState *cs, vaddr address, int ret; MemTxAttrs attrs = {}; - ret = get_phys_addr(env, address, access_type, mmu_idx, &phys_addr, + ret = get_phys_addr(env, address, access_type, + core_to_arm_mmu_idx(env, mmu_idx), &phys_addr, &attrs, &prot, &page_size, fsr, fi); if (!ret) { /* Map a single [sub]page. */ @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, bool ret; uint32_t fsr; ARMMMUFaultInfo fi = {}; + ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, cpu_mmu_index(env, false), &phys_addr, + ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fsr, &fi); if (ret) { diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, int target_el; bool same_el; uint32_t syn; + ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); if (retaddr) { /* now we have a real cpu fault */ @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, /* the DFSR for an alignment fault depends on whether we're using * the LPAE long descriptor format, or the short descriptor format */ - if (arm_s1_regime_using_lpae_format(env, mmu_idx)) { + if (arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { env->exception.fsr = (1 << 9) | 0x21; } else { env->exception.fsr = 0x1; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void a64_translate_init(void) offsetof(CPUARMState, exclusive_high), "exclusive_high"); } -static inline ARMMMUIdx get_a64_user_mem_index(DisasContext *s) +static inline int get_a64_user_mem_index(DisasContext *s) { - /* Return the mmu_idx to use for A64 "unprivileged load/store" insns: + /* Return the core mmu_idx to use for A64 "unprivileged load/store" insns: * if EL1, access as if EL0; otherwise access at current EL */ + ARMMMUIdx useridx; + switch (s->mmu_idx) { case ARMMMUIdx_S12NSE1: - return ARMMMUIdx_S12NSE0; + useridx = ARMMMUIdx_S12NSE0; + break; case ARMMMUIdx_S1SE1: - return ARMMMUIdx_S1SE0; + useridx = ARMMMUIdx_S1SE0; + break; case ARMMMUIdx_S2NS: g_assert_not_reached(); default: - return s->mmu_idx; + useridx = s->mmu_idx; + break; } + return arm_to_core_mmu_idx(useridx); } void aarch64_cpu_dump_state(CPUState *cs, FILE *f, @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code_a64(ARMCPU *cpu, TranslationBlock *tb) dc->be_data = ARM_TBFLAG_BE_DATA(tb->flags) ? MO_BE : MO_LE; dc->condexec_mask = 0; dc->condexec_cond = 0; - dc->mmu_idx = ARM_TBFLAG_MMUIDX(tb->flags); + dc->mmu_idx = core_to_arm_mmu_idx(env, ARM_TBFLAG_MMUIDX(tb->flags)); dc->tbi0 = ARM_TBFLAG_TBI0(tb->flags); dc->tbi1 = ARM_TBFLAG_TBI1(tb->flags); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_set_da_iss(DisasContext *s, TCGMemOp memop, ISSInfo issinfo) disas_set_insn_syndrome(s, syn); } -static inline ARMMMUIdx get_a32_user_mem_index(DisasContext *s) +static inline int get_a32_user_mem_index(DisasContext *s) { - /* Return the mmu_idx to use for A32/T32 "unprivileged load/store" + /* Return the core mmu_idx to use for A32/T32 "unprivileged load/store" * insns: * if PL2, UNPREDICTABLE (we choose to implement as if PL0) * otherwise, access as if at PL0. @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx get_a32_user_mem_index(DisasContext *s) case ARMMMUIdx_S1E2: /* this one is UNPREDICTABLE */ case ARMMMUIdx_S12NSE0: case ARMMMUIdx_S12NSE1: - return ARMMMUIdx_S12NSE0; + return arm_to_core_mmu_idx(ARMMMUIdx_S12NSE0); case ARMMMUIdx_S1E3: case ARMMMUIdx_S1SE0: case ARMMMUIdx_S1SE1: - return ARMMMUIdx_S1SE0; + return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0); case ARMMMUIdx_S2NS: default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) dc->be_data = ARM_TBFLAG_BE_DATA(tb->flags) ? MO_BE : MO_LE; dc->condexec_mask = (ARM_TBFLAG_CONDEXEC(tb->flags) & 0xf) << 1; dc->condexec_cond = ARM_TBFLAG_CONDEXEC(tb->flags) >> 4; - dc->mmu_idx = ARM_TBFLAG_MMUIDX(tb->flags); + dc->mmu_idx = core_to_arm_mmu_idx(env, ARM_TBFLAG_MMUIDX(tb->flags)); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); #if !defined(CONFIG_USER_ONLY) dc->user = (dc->current_el == 0); -- 2.7.4 Make M profile use completely separate ARMMMUIdx values from those that A profile CPUs use. This is a prelude to adding support for the MPU and for v8M, which together will require 6 MMU indexes which don't map cleanly onto the A profile uses: non secure User non secure Privileged non secure Privileged, execution priority < 0 secure User secure Privileged secure Privileged, execution priority < 0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1493122030-32191-4-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 21 +++++++++++++++++++-- target/arm/helper.c | 5 +++++ target/arm/translate.c | 3 +++ 3 files changed, 27 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * of the AT/ATS operations. * The values used are carefully arranged to make mmu_idx => EL lookup easy. */ -#define ARM_MMU_IDX_A 0x10 /* A profile (and M profile, for the moment) */ +#define ARM_MMU_IDX_A 0x10 /* A profile */ #define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */ +#define ARM_MMU_IDX_M 0x40 /* M profile */ #define ARM_MMU_IDX_TYPE_MASK (~0x7) #define ARM_MMU_IDX_COREIDX_MASK 0x7 @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdx { ARMMMUIdx_S1SE0 = 4 | ARM_MMU_IDX_A, ARMMMUIdx_S1SE1 = 5 | ARM_MMU_IDX_A, ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A, + ARMMMUIdx_MUser = 0 | ARM_MMU_IDX_M, + ARMMMUIdx_MPriv = 1 | ARM_MMU_IDX_M, /* Indexes below here don't have TLBs and are used only for AT system * instructions or for the first stage of an S12 page table walk. */ @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { ARMMMUIdxBit_S1SE0 = 1 << 4, ARMMMUIdxBit_S1SE1 = 1 << 5, ARMMMUIdxBit_S2NS = 1 << 6, + ARMMMUIdxBit_MUser = 1 << 0, + ARMMMUIdxBit_MPriv = 1 << 1, } ARMMMUIdxBit; #define MMU_USER_IDX 0 @@ -XXX,XX +XXX,XX @@ static inline int arm_to_core_mmu_idx(ARMMMUIdx mmu_idx) static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) { - return mmu_idx | ARM_MMU_IDX_A; + if (arm_feature(env, ARM_FEATURE_M)) { + return mmu_idx | ARM_MMU_IDX_M; + } else { + return mmu_idx | ARM_MMU_IDX_A; + } } /* Return the exception level we're running at if this is our mmu_idx */ @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) switch (mmu_idx & ARM_MMU_IDX_TYPE_MASK) { case ARM_MMU_IDX_A: return mmu_idx & 3; + case ARM_MMU_IDX_M: + return mmu_idx & 1; default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) { int el = arm_current_el(env); + if (arm_feature(env, ARM_FEATURE_M)) { + ARMMMUIdx mmu_idx = el == 0 ? ARMMMUIdx_MUser : ARMMMUIdx_MPriv; + + return arm_to_core_mmu_idx(mmu_idx); + } + if (el < 2 && arm_is_secure_below_el3(env)) { return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0 + el); } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t regime_el(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1SE1: case ARMMMUIdx_S1NSE0: case ARMMMUIdx_S1NSE1: + case ARMMMUIdx_MPriv: + case ARMMMUIdx_MUser: return 1; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_secure(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1NSE1: case ARMMMUIdx_S1E2: case ARMMMUIdx_S2NS: + case ARMMMUIdx_MPriv: + case ARMMMUIdx_MUser: return false; case ARMMMUIdx_S1E3: case ARMMMUIdx_S1SE0: @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_user(CPUARMState *env, ARMMMUIdx mmu_idx) switch (mmu_idx) { case ARMMMUIdx_S1SE0: case ARMMMUIdx_S1NSE0: + case ARMMMUIdx_MUser: return true; default: return false; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline int get_a32_user_mem_index(DisasContext *s) case ARMMMUIdx_S1SE0: case ARMMMUIdx_S1SE1: return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0); + case ARMMMUIdx_MUser: + case ARMMMUIdx_MPriv: + return arm_to_core_mmu_idx(ARMMMUIdx_MUser); case ARMMMUIdx_S2NS: default: g_assert_not_reached(); -- 2.7.4 ARM CPUs come in two flavours: * proper MMU ("VMSA") * only an MPU ("PMSA") For PMSA, the MPU may be implemented, or not (in which case there is default "always acts the same" behaviour, but it isn't guest programmable). QEMU is a bit confused about how we indicate this: we have an ARM_FEATURE_MPU, but it's not clear whether this indicates "PMSA, not VMSA" or "PMSA and MPU present" , and sometimes we use it for one purpose and sometimes the other. Currently trying to implement a PMSA-without-MPU core won't work correctly because we turn off the ARM_FEATURE_MPU bit and then a lot of things which should still exist get turned off too. As the first step in cleaning this up, rename the feature bit to ARM_FEATURE_PMSA, which indicates a PMSA CPU (with or without MPU). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-5-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 2 +- target/arm/cpu.c | 12 ++++++------ target/arm/helper.c | 12 ++++++------ target/arm/machine.c | 2 +- 4 files changed, 14 insertions(+), 14 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V6K, ARM_FEATURE_V7, ARM_FEATURE_THUMB2, - ARM_FEATURE_MPU, /* Only has Memory Protection Unit, not full MMU. */ + ARM_FEATURE_PMSA, /* no MMU; may have Memory Protection Unit */ ARM_FEATURE_VFP3, ARM_FEATURE_VFP_FP16, ARM_FEATURE_NEON, diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) &error_abort); } - if (arm_feature(&cpu->env, ARM_FEATURE_MPU)) { + if (arm_feature(&cpu->env, ARM_FEATURE_PMSA)) { qdev_property_add_static(DEVICE(obj), &arm_cpu_has_mpu_property, &error_abort); if (arm_feature(&cpu->env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && - !arm_feature(env, ARM_FEATURE_MPU)) { + !arm_feature(env, ARM_FEATURE_PMSA)) { /* v7VMSA drops support for the old ARMv5 tiny pages, so we * can use 4K pages. */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (!cpu->has_mpu) { - unset_feature(env, ARM_FEATURE_MPU); + unset_feature(env, ARM_FEATURE_PMSA); } - if (arm_feature(env, ARM_FEATURE_MPU) && + if (arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7)) { uint32_t nr = cpu->pmsav7_dregion; @@ -XXX,XX +XXX,XX @@ static void arm946_initfn(Object *obj) cpu->dtb_compatible = "arm,arm946"; set_feature(&cpu->env, ARM_FEATURE_V5); - set_feature(&cpu->env, ARM_FEATURE_MPU); + set_feature(&cpu->env, ARM_FEATURE_PMSA); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); cpu->midr = 0x41059461; cpu->ctr = 0x0f004006; @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_THUMB_DIV); set_feature(&cpu->env, ARM_FEATURE_ARM_DIV); set_feature(&cpu->env, ARM_FEATURE_V7MP); - set_feature(&cpu->env, ARM_FEATURE_MPU); + set_feature(&cpu->env, ARM_FEATURE_PMSA); cpu->midr = 0x411fc153; /* r1p3 */ cpu->id_pfr0 = 0x0131; cpu->id_pfr1 = 0x001; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri, { ARMCPU *cpu = arm_env_get_cpu(env); - if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_MPU) + if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_PMSA) && !extended_addresses_enabled(env)) { /* For VMSA (when not using the LPAE long descriptor page table * format) this register includes the ASID, so do a TLB flush. @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, v6k_cp_reginfo); } if (arm_feature(env, ARM_FEATURE_V7MP) && - !arm_feature(env, ARM_FEATURE_MPU)) { + !arm_feature(env, ARM_FEATURE_PMSA)) { define_arm_cp_regs(cpu, v7mp_cp_reginfo); } if (arm_feature(env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } } - if (arm_feature(env, ARM_FEATURE_MPU)) { + if (arm_feature(env, ARM_FEATURE_PMSA)) { if (arm_feature(env, ARM_FEATURE_V6)) { /* PMSAv6 not implemented */ assert(arm_feature(env, ARM_FEATURE_V7)); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, id_pre_v8_midr_cp_reginfo); } define_arm_cp_regs(cpu, id_cp_reginfo); - if (!arm_feature(env, ARM_FEATURE_MPU)) { + if (!arm_feature(env, ARM_FEATURE_PMSA)) { define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo); } else if (arm_feature(env, ARM_FEATURE_V7)) { define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, /* pmsav7 has special handling for when MPU is disabled so call it before * the common MMU/MPU disabled check below. */ - if (arm_feature(env, ARM_FEATURE_MPU) && + if (arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7)) { *page_size = TARGET_PAGE_SIZE; return get_phys_addr_pmsav7(env, address, access_type, mmu_idx, @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, return 0; } - if (arm_feature(env, ARM_FEATURE_MPU)) { + if (arm_feature(env, ARM_FEATURE_PMSA)) { /* Pre-v7 MPU */ *page_size = TARGET_PAGE_SIZE; return get_phys_addr_pmsav5(env, address, access_type, mmu_idx, diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static bool pmsav7_needed(void *opaque) ARMCPU *cpu = opaque; CPUARMState *env = &cpu->env; - return arm_feature(env, ARM_FEATURE_MPU) && + return arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7); } -- 2.7.4 Fix the handling of QOM properties for PMSA CPUs with no MPU: Allow no-MPU to be specified by either: * has-mpu = false * pmsav7_dregion = 0 and make setting one imply the other. Don't clear the PMSA feature bit in this situation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-6-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) cpu->id_pfr1 &= ~0xf000; } + /* MPU can be configured out of a PMSA CPU either by setting has-mpu + * to false or by setting pmsav7-dregion to 0. + */ if (!cpu->has_mpu) { - unset_feature(env, ARM_FEATURE_PMSA); + cpu->pmsav7_dregion = 0; + } + if (cpu->pmsav7_dregion == 0) { + cpu->has_mpu = false; } if (arm_feature(env, ARM_FEATURE_PMSA) && -- 2.7.4 If the CPU is a PMSA config with no MPU implemented, then the SCTLR.M bit should be RAZ/WI, so that the guest can never turn on the non-existent MPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-7-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, return; } + if (arm_feature(env, ARM_FEATURE_PMSA) && !cpu->has_mpu) { + /* M bit is RAZ/WI for PMSA with no MPU implemented */ + value &= ~SCTLR_M; + } + raw_write(env, ri, value); /* ??? Lots of these bits are not implemented. */ /* This may enable/disable the MMU, so do a TLB flush. */ -- 2.7.4 Now that we enforce both: * pmsav7_dregion == 0 implies has_mpu == false * PMSA with has_mpu == false means SCTLR.M cannot be set we can remove a check on pmsav7_dregion from get_phys_addr_pmsav7(), because we can only reach this code path if the MPU is enabled (and so region_translation_disabled() returned false). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-8-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (n == -1) { /* no hits */ - if (cpu->pmsav7_dregion && - (is_user || !(regime_sctlr(env, mmu_idx) & SCTLR_BR))) { + if (is_user || !(regime_sctlr(env, mmu_idx) & SCTLR_BR)) { /* background fault */ *fsr = 0; return true; -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> Improve the "-d mmu" tracing for the PMSAv7 MPU translation process as an aid in debugging guest MPU configurations: * fix a missing newline for a guest-error log * report the region number with guest-error or unimp logs of bad region register values * add a log message for the overall result of the lookup * print "0x" prefix for hex values Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-9-git-send-email-peter.maydell@linaro.org [PMM: a little tidyup, report region number in all messages rather than just one] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (!rsize) { - qemu_log_mask(LOG_GUEST_ERROR, "DRSR.Rsize field can not be 0"); + qemu_log_mask(LOG_GUEST_ERROR, + "DRSR[%d]: Rsize field cannot be 0\n", n); continue; } rsize++; rmask = (1ull << rsize) - 1; if (base & rmask) { - qemu_log_mask(LOG_GUEST_ERROR, "DRBAR %" PRIx32 " misaligned " - "to DRSR region size, mask = %" PRIx32, - base, rmask); + qemu_log_mask(LOG_GUEST_ERROR, + "DRBAR[%d]: 0x%" PRIx32 " misaligned " + "to DRSR region size, mask = 0x%" PRIx32 "\n", + n, base, rmask); continue; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } } if (rsize < TARGET_PAGE_BITS) { - qemu_log_mask(LOG_UNIMP, "No support for MPU (sub)region" + qemu_log_mask(LOG_UNIMP, + "DRSR[%d]: No support for MPU (sub)region " "alignment of %" PRIu32 " bits. Minimum is %d\n", - rsize, TARGET_PAGE_BITS); + n, rsize, TARGET_PAGE_BITS); continue; } if (srdis) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, break; default: qemu_log_mask(LOG_GUEST_ERROR, - "Bad value for AP bits in DRACR %" - PRIx32 "\n", ap); + "DRACR[%d]: Bad value for AP bits: 0x%" + PRIx32 "\n", n, ap); } } else { /* Priv. mode AP bits decoding */ switch (ap) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, break; default: qemu_log_mask(LOG_GUEST_ERROR, - "Bad value for AP bits in DRACR %" - PRIx32 "\n", ap); + "DRACR[%d]: Bad value for AP bits: 0x%" + PRIx32 "\n", n, ap); } } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, */ if (arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7)) { + bool ret; *page_size = TARGET_PAGE_SIZE; - return get_phys_addr_pmsav7(env, address, access_type, mmu_idx, - phys_ptr, prot, fsr); + ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx, + phys_ptr, prot, fsr); + qemu_log_mask(CPU_LOG_MMU, "PMSAv7 MPU lookup for %s at 0x%08" PRIx32 + " mmu_idx %u -> %s (prot %c%c%c)\n", + access_type == 1 ? "reading" : + (access_type == 2 ? "writing" : "execute"), + (uint32_t)address, mmu_idx, + ret ? "Miss" : "Hit", + *prot & PAGE_READ ? 'r' : '-', + *prot & PAGE_WRITE ? 'w' : '-', + *prot & PAGE_EXEC ? 'x' : '-'); + + return ret; } if (regime_translation_disabled(env, mmu_idx)) { -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> Add support for the M profile default memory map which is used if the MPU is not present or disabled. The main differences in behaviour from implementing this correctly are that we set the PAGE_EXEC attribute on the right regions of memory, such that device regions are not executable. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Message-id: 1493122030-32191-10-git-send-email-peter.maydell@linaro.org [PMM: rephrased comment and commit message; don't mark the flash memory region as not-writable; list all the cases in the default map explicitly rather than using a 'default' case for the non-executable regions] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 41 ++++++++++++++++++++++++++++++++--------- 1 file changed, 32 insertions(+), 9 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline void get_phys_addr_pmsav7_default(CPUARMState *env, ARMMMUIdx mmu_idx, int32_t address, int *prot) { - *prot = PAGE_READ | PAGE_WRITE; - switch (address) { - case 0xF0000000 ... 0xFFFFFFFF: - if (regime_sctlr(env, mmu_idx) & SCTLR_V) { /* hivecs execing is ok */ + if (!arm_feature(env, ARM_FEATURE_M)) { + *prot = PAGE_READ | PAGE_WRITE; + switch (address) { + case 0xF0000000 ... 0xFFFFFFFF: + if (regime_sctlr(env, mmu_idx) & SCTLR_V) { + /* hivecs execing is ok */ + *prot |= PAGE_EXEC; + } + break; + case 0x00000000 ... 0x7FFFFFFF: *prot |= PAGE_EXEC; + break; + } + } else { + /* Default system address map for M profile cores. + * The architecture specifies which regions are execute-never; + * at the MPU level no other checks are defined. + */ + switch (address) { + case 0x00000000 ... 0x1fffffff: /* ROM */ + case 0x20000000 ... 0x3fffffff: /* SRAM */ + case 0x60000000 ... 0x7fffffff: /* RAM */ + case 0x80000000 ... 0x9fffffff: /* RAM */ + *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; + break; + case 0x40000000 ... 0x5fffffff: /* Peripheral */ + case 0xa0000000 ... 0xbfffffff: /* Device */ + case 0xc0000000 ... 0xdfffffff: /* Device */ + case 0xe0000000 ... 0xffffffff: /* System */ + *prot = PAGE_READ | PAGE_WRITE; + break; + default: + g_assert_not_reached(); } - break; - case 0x00000000 ... 0x7FFFFFFF: - *prot |= PAGE_EXEC; - break; } - } static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, -- 2.7.4 All M profile CPUs are PMSA, so set the feature bit. (We haven't actually implemented the M profile MPU register interface yet, but setting this feature bit gives us closer to correct behaviour for the MPU-disabled case.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-11-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); + /* M profile implies PMSA. We have to do this here rather than + * in realize with the other feature-implication checks because + * we look at the PMSA bit to see if we should add some properties. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_M)) { + set_feature(&cpu->env, ARM_FEATURE_PMSA); + } + if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { qdev_property_add_static(DEVICE(obj), &arm_cpu_reset_cbar_property, -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> General logic is that operations stopped by the MPU are MemManage, and those which go through the MPU and are caught by the unassigned handle are BusFault. Distinguish these by looking at the exception.fsr values, and set the CFSR bits and (if appropriate) fill in the BFAR or MMFAR with the exception address. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Message-id: 1493122030-32191-12-git-send-email-peter.maydell@linaro.org [PMM: i-side faults do not set BFAR/MMFAR, only d-side; added some CPU_LOG_INT logging] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- target/arm/helper.c | 45 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 42 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* TODO: if we implemented the MPU registers, this is where we - * should set the MMFAR, etc from exception.fsr and exception.vaddress. + /* Note that for M profile we don't have a guest facing FSR, but + * the env->exception.fsr will be populated by the code that + * raises the fault, in the A profile short-descriptor format. */ - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM); + switch (env->exception.fsr & 0xf) { + case 0x8: /* External Abort */ + switch (cs->exception_index) { + case EXCP_PREFETCH_ABORT: + env->v7m.cfsr |= R_V7M_CFSR_PRECISERR_MASK; + qemu_log_mask(CPU_LOG_INT, "...with CFSR.PRECISERR\n"); + break; + case EXCP_DATA_ABORT: + env->v7m.cfsr |= + (R_V7M_CFSR_IBUSERR_MASK | R_V7M_CFSR_BFARVALID_MASK); + env->v7m.bfar = env->exception.vaddress; + qemu_log_mask(CPU_LOG_INT, + "...with CFSR.IBUSERR and BFAR 0x%x\n", + env->v7m.bfar); + break; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS); + break; + default: + /* All other FSR values are either MPU faults or "can't happen + * for M profile" cases. + */ + switch (cs->exception_index) { + case EXCP_PREFETCH_ABORT: + env->v7m.cfsr |= R_V7M_CFSR_IACCVIOL_MASK; + qemu_log_mask(CPU_LOG_INT, "...with CFSR.IACCVIOL\n"); + break; + case EXCP_DATA_ABORT: + env->v7m.cfsr |= + (R_V7M_CFSR_DACCVIOL_MASK | R_V7M_CFSR_MMARVALID_MASK); + env->v7m.mmfar = env->exception.vaddress; + qemu_log_mask(CPU_LOG_INT, + "...with CFSR.DACCVIOL and MMFAR 0x%x\n", + env->v7m.mmfar); + break; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM); + break; + } break; case EXCP_BKPT: if (semihosting_enabled()) { -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> The M series MPU is almost the same as the already implemented R profile MPU (v7 PMSA). So all we need to implement here is the MPU register interface in the system register space. This implementation has the same restriction as the R profile MPU that it doesn't permit regions to be sized down smaller than 1K. We also do not yet implement support for MPU_CTRL.HFNMIENA; this bit should if zero disable use of the MPU when running HardFault, NMI or with FAULTMASK set to 1 (ie at an execution priority of less than zero) -- if the MPU is enabled we don't treat these cases any differently. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Message-id: 1493122030-32191-13-git-send-email-peter.maydell@linaro.org [PMM: Keep all the bits in mpu_ctrl field, rather than using SCTLR bits for them; drop broken HFNMIENA support; various cleanup] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 6 +++ hw/intc/armv7m_nvic.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++ target/arm/helper.c | 25 +++++++++++- target/arm/machine.c | 5 ++- 4 files changed, 137 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t dfsr; /* Debug Fault Status Register */ uint32_t mmfar; /* MemManage Fault Address */ uint32_t bfar; /* BusFault Address */ + unsigned mpu_ctrl; /* MPU_CTRL (some bits kept in sctlr_el[1]) */ int exception; } v7m; @@ -XXX,XX +XXX,XX @@ FIELD(V7M_DFSR, DWTTRAP, 2, 1) FIELD(V7M_DFSR, VCATCH, 3, 1) FIELD(V7M_DFSR, EXTERNAL, 4, 1) +/* v7M MPU_CTRL bits */ +FIELD(V7M_MPU_CTRL, ENABLE, 0, 1) +FIELD(V7M_MPU_CTRL, HFNMIENA, 1, 1) +FIELD(V7M_MPU_CTRL, PRIVDEFENA, 2, 1) + /* If adding a feature bit which corresponds to a Linux ELF * HWCAP bit, remember to update the feature-bit-to-hwcap * mapping in linux-user/elfload.c:get_elf_hwcap(). diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" +#include "exec/exec-all.h" #include "qemu/log.h" #include "trace.h" @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) case 0xd70: /* ISAR4. */ return 0x01310102; /* TODO: Implement debug registers. */ + case 0xd90: /* MPU_TYPE */ + /* Unified MPU; if the MPU is not present this value is zero */ + return cpu->pmsav7_dregion << 8; + break; + case 0xd94: /* MPU_CTRL */ + return cpu->env.v7m.mpu_ctrl; + case 0xd98: /* MPU_RNR */ + return cpu->env.cp15.c6_rgnr; + case 0xd9c: /* MPU_RBAR */ + case 0xda4: /* MPU_RBAR_A1 */ + case 0xdac: /* MPU_RBAR_A2 */ + case 0xdb4: /* MPU_RBAR_A3 */ + { + int region = cpu->env.cp15.c6_rgnr; + + if (region >= cpu->pmsav7_dregion) { + return 0; + } + return (cpu->env.pmsav7.drbar[region] & 0x1f) | (region & 0xf); + } + case 0xda0: /* MPU_RASR */ + case 0xda8: /* MPU_RASR_A1 */ + case 0xdb0: /* MPU_RASR_A2 */ + case 0xdb8: /* MPU_RASR_A3 */ + { + int region = cpu->env.cp15.c6_rgnr; + + if (region >= cpu->pmsav7_dregion) { + return 0; + } + return ((cpu->env.pmsav7.dracr[region] & 0xffff) << 16) | + (cpu->env.pmsav7.drsr[region] & 0xffff); + } default: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); return 0; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) qemu_log_mask(LOG_UNIMP, "NVIC: Aux fault status registers unimplemented\n"); break; + case 0xd90: /* MPU_TYPE */ + return; /* RO */ + case 0xd94: /* MPU_CTRL */ + if ((value & + (R_V7M_MPU_CTRL_HFNMIENA_MASK | R_V7M_MPU_CTRL_ENABLE_MASK)) + == R_V7M_MPU_CTRL_HFNMIENA_MASK) { + qemu_log_mask(LOG_GUEST_ERROR, "MPU_CTRL: HFNMIENA and !ENABLE is " + "UNPREDICTABLE\n"); + } + cpu->env.v7m.mpu_ctrl = value & (R_V7M_MPU_CTRL_ENABLE_MASK | + R_V7M_MPU_CTRL_HFNMIENA_MASK | + R_V7M_MPU_CTRL_PRIVDEFENA_MASK); + tlb_flush(CPU(cpu)); + break; + case 0xd98: /* MPU_RNR */ + if (value >= cpu->pmsav7_dregion) { + qemu_log_mask(LOG_GUEST_ERROR, "MPU region out of range %" + PRIu32 "/%" PRIu32 "\n", + value, cpu->pmsav7_dregion); + } else { + cpu->env.cp15.c6_rgnr = value; + } + break; + case 0xd9c: /* MPU_RBAR */ + case 0xda4: /* MPU_RBAR_A1 */ + case 0xdac: /* MPU_RBAR_A2 */ + case 0xdb4: /* MPU_RBAR_A3 */ + { + int region; + + if (value & (1 << 4)) { + /* VALID bit means use the region number specified in this + * value and also update MPU_RNR.REGION with that value. + */ + region = extract32(value, 0, 4); + if (region >= cpu->pmsav7_dregion) { + qemu_log_mask(LOG_GUEST_ERROR, + "MPU region out of range %u/%" PRIu32 "\n", + region, cpu->pmsav7_dregion); + return; + } + cpu->env.cp15.c6_rgnr = region; + } else { + region = cpu->env.cp15.c6_rgnr; + } + + if (region >= cpu->pmsav7_dregion) { + return; + } + + cpu->env.pmsav7.drbar[region] = value & ~0x1f; + tlb_flush(CPU(cpu)); + break; + } + case 0xda0: /* MPU_RASR */ + case 0xda8: /* MPU_RASR_A1 */ + case 0xdb0: /* MPU_RASR_A2 */ + case 0xdb8: /* MPU_RASR_A3 */ + { + int region = cpu->env.cp15.c6_rgnr; + + if (region >= cpu->pmsav7_dregion) { + return; + } + + cpu->env.pmsav7.drsr[region] = value & 0xff3f; + cpu->env.pmsav7.dracr[region] = (value >> 16) & 0x173f; + tlb_flush(CPU(cpu)); + break; + } case 0xf00: /* Software Triggered Interrupt Register */ { /* user mode can only write to STIR if CCR.USERSETMPEND permits it */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t regime_sctlr(CPUARMState *env, ARMMMUIdx mmu_idx) static inline bool regime_translation_disabled(CPUARMState *env, ARMMMUIdx mmu_idx) { + if (arm_feature(env, ARM_FEATURE_M)) { + return !(env->v7m.mpu_ctrl & R_V7M_MPU_CTRL_ENABLE_MASK); + } + if (mmu_idx == ARMMMUIdx_S2NS) { return (env->cp15.hcr_el2 & HCR_VM) == 0; } @@ -XXX,XX +XXX,XX @@ static inline void get_phys_addr_pmsav7_default(CPUARMState *env, } } +static bool pmsav7_use_background_region(ARMCPU *cpu, + ARMMMUIdx mmu_idx, bool is_user) +{ + /* Return true if we should use the default memory map as a + * "background" region if there are no hits against any MPU regions. + */ + CPUARMState *env = &cpu->env; + + if (is_user) { + return false; + } + + if (arm_feature(env, ARM_FEATURE_M)) { + return env->v7m.mpu_ctrl & R_V7M_MPU_CTRL_PRIVDEFENA_MASK; + } else { + return regime_sctlr(env, mmu_idx) & SCTLR_BR; + } +} + static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, int access_type, ARMMMUIdx mmu_idx, hwaddr *phys_ptr, int *prot, uint32_t *fsr) @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (n == -1) { /* no hits */ - if (is_user || !(regime_sctlr(env, mmu_idx) & SCTLR_BR)) { + if (!pmsav7_use_background_region(cpu, mmu_idx, is_user)) { /* background fault */ *fsr = 0; return true; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static bool m_needed(void *opaque) static const VMStateDescription vmstate_m = { .name = "cpu/m", - .version_id = 3, - .minimum_version_id = 3, + .version_id = 4, + .minimum_version_id = 4, .needed = m_needed, .fields = (VMStateField[]) { VMSTATE_UINT32(env.v7m.vecbase, ARMCPU), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { VMSTATE_UINT32(env.v7m.dfsr, ARMCPU), VMSTATE_UINT32(env.v7m.mmfar, ARMCPU), VMSTATE_UINT32(env.v7m.bfar, ARMCPU), + VMSTATE_UINT32(env.v7m.mpu_ctrl, ARMCPU), VMSTATE_INT32(env.v7m.exception, ARMCPU), VMSTATE_END_OF_LIST() } -- 2.7.4 Implement HFNMIENA support for the M profile MPU. This bit controls whether the MPU is treated as enabled when executing at execution priorities of less than zero (in NMI, HardFault or with the FAULTMASK bit set). Doing this requires us to use a different MMU index for "running at execution priority < 0", because we will have different access permissions for that case versus the normal case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1493122030-32191-14-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 24 +++++++++++++++++++++++- target/arm/helper.c | 18 +++++++++++++++++- target/arm/translate.c | 1 + 3 files changed, 41 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * for the accesses done as part of a stage 1 page table walk, rather than * having to walk the stage 2 page table over and over.) * + * R profile CPUs have an MPU, but can use the same set of MMU indexes + * as A profile. They only need to distinguish NS EL0 and NS EL1 (and + * NS EL2 if we ever model a Cortex-R52). + * + * M profile CPUs are rather different as they do not have a true MMU. + * They have the following different MMU indexes: + * User + * Privileged + * Execution priority negative (this is like privileged, but the + * MPU HFNMIENA bit means that it may have different access permission + * check results to normal privileged code, so can't share a TLB). + * * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code * are not quite the same -- different CPU types (most notably M profile * vs A/R profile) would like to use MMU indexes with different semantics, @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdx { ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A, ARMMMUIdx_MUser = 0 | ARM_MMU_IDX_M, ARMMMUIdx_MPriv = 1 | ARM_MMU_IDX_M, + ARMMMUIdx_MNegPri = 2 | ARM_MMU_IDX_M, /* Indexes below here don't have TLBs and are used only for AT system * instructions or for the first stage of an S12 page table walk. */ @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { ARMMMUIdxBit_S2NS = 1 << 6, ARMMMUIdxBit_MUser = 1 << 0, ARMMMUIdxBit_MPriv = 1 << 1, + ARMMMUIdxBit_MNegPri = 1 << 2, } ARMMMUIdxBit; #define MMU_USER_IDX 0 @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) case ARM_MMU_IDX_A: return mmu_idx & 3; case ARM_MMU_IDX_M: - return mmu_idx & 1; + return mmu_idx == ARMMMUIdx_MUser ? 0 : 1; default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) if (arm_feature(env, ARM_FEATURE_M)) { ARMMMUIdx mmu_idx = el == 0 ? ARMMMUIdx_MUser : ARMMMUIdx_MPriv; + /* Execution priority is negative if FAULTMASK is set or + * we're in a HardFault or NMI handler. + */ + if ((env->v7m.exception > 0 && env->v7m.exception <= 3) + || env->daif & PSTATE_F) { + return arm_to_core_mmu_idx(ARMMMUIdx_MNegPri); + } + return arm_to_core_mmu_idx(mmu_idx); } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t regime_el(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1NSE0: case ARMMMUIdx_S1NSE1: case ARMMMUIdx_MPriv: + case ARMMMUIdx_MNegPri: case ARMMMUIdx_MUser: return 1; default: @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_secure(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1E2: case ARMMMUIdx_S2NS: case ARMMMUIdx_MPriv: + case ARMMMUIdx_MNegPri: case ARMMMUIdx_MUser: return false; case ARMMMUIdx_S1E3: @@ -XXX,XX +XXX,XX @@ static inline bool regime_translation_disabled(CPUARMState *env, ARMMMUIdx mmu_idx) { if (arm_feature(env, ARM_FEATURE_M)) { - return !(env->v7m.mpu_ctrl & R_V7M_MPU_CTRL_ENABLE_MASK); + switch (env->v7m.mpu_ctrl & + (R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK)) { + case R_V7M_MPU_CTRL_ENABLE_MASK: + /* Enabled, but not for HardFault and NMI */ + return mmu_idx == ARMMMUIdx_MNegPri; + case R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK: + /* Enabled for all cases */ + return false; + case 0: + default: + /* HFNMIENA set and ENABLE clear is UNPREDICTABLE, but + * we warned about that in armv7m_nvic.c when the guest set it. + */ + return true; + } } if (mmu_idx == ARMMMUIdx_S2NS) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline int get_a32_user_mem_index(DisasContext *s) return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0); case ARMMMUIdx_MUser: case ARMMMUIdx_MPriv: + case ARMMMUIdx_MNegPri: return arm_to_core_mmu_idx(ARMMMUIdx_MUser); case ARMMMUIdx_S2NS: default: -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Multiple I2C commands can be fired simultaneously and the controller execute the commands following these priorities: (1) Master Start Command (2) Master Transmit Command (3) Slave Transmit Command or Master Receive Command (4) Master Stop Command The current code is incorrect with respect to the above sequence and needs to be reworked to handle each individual command. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/aspeed_i2c.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { + bus->cmd &= ~0xFFFF; bus->cmd |= value & 0xFFFF; bus->intr_status = 0; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status |= I2CD_INTR_TX_ACK; } - } else if (bus->cmd & I2CD_M_TX_CMD) { + /* START command is also a TX command, as the slave address is + * sent on the bus */ + bus->cmd &= ~(I2CD_M_START_CMD | I2CD_M_TX_CMD); + + /* No slave found */ + if (!i2c_bus_busy(bus->bus)) { + return; + } + } + + if (bus->cmd & I2CD_M_TX_CMD) { if (i2c_send(bus->bus, bus->buf)) { bus->intr_status |= (I2CD_INTR_TX_NAK | I2CD_INTR_ABNORMAL); i2c_end_transfer(bus->bus); } else { bus->intr_status |= I2CD_INTR_TX_ACK; } + bus->cmd &= ~I2CD_M_TX_CMD; + } - } else if (bus->cmd & I2CD_M_RX_CMD) { + if (bus->cmd & I2CD_M_RX_CMD) { int ret = i2c_recv(bus->bus); if (ret < 0) { qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__); @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status |= I2CD_INTR_RX_DONE; } bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; + bus->cmd &= ~I2CD_M_RX_CMD; } if (bus->cmd & (I2CD_M_STOP_CMD | I2CD_M_S_RX_CMD_LAST)) { @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) i2c_end_transfer(bus->bus); bus->intr_status |= I2CD_INTR_NORMAL_STOP; } + bus->cmd &= ~I2CD_M_STOP_CMD; } - - /* command is handled, reset it and check for interrupts */ - bus->cmd &= ~0xFFFF; - aspeed_i2c_bus_raise_interrupt(bus); } static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, } aspeed_i2c_bus_handle_cmd(bus, value); + aspeed_i2c_bus_raise_interrupt(bus); break; default: -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Today, the LAST command is handled with the STOP command but this is incorrect. Also nack the I2C bus when a LAST is issued. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/aspeed_i2c.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->cmd &= ~I2CD_M_TX_CMD; } - if (bus->cmd & I2CD_M_RX_CMD) { + if (bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST)) { int ret = i2c_recv(bus->bus); if (ret < 0) { qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__); @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status |= I2CD_INTR_RX_DONE; } bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; - bus->cmd &= ~I2CD_M_RX_CMD; + if (bus->cmd & I2CD_M_S_RX_CMD_LAST) { + i2c_nack(bus->bus); + } + bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST); } - if (bus->cmd & (I2CD_M_STOP_CMD | I2CD_M_S_RX_CMD_LAST)) { + if (bus->cmd & I2CD_M_STOP_CMD) { if (!i2c_bus_busy(bus->bus)) { bus->intr_status |= I2CD_INTR_ABNORMAL; } else { -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> The Aspeed I2C controller maintains a state machine in the command register, which is mostly used for debug. Let's start adding a few states to handle abnormal STOP commands. Today, the model uses the busy status of the bus as a condition to do so but it is not precise enough. Also remove the ABNORMAL bit for failing TX commands. This is incorrect with respect to the specs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/aspeed_i2c.c | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, } } +static void aspeed_i2c_set_state(AspeedI2CBus *bus, uint8_t state) +{ + bus->cmd &= ~(I2CD_TX_STATE_MASK << I2CD_TX_STATE_SHIFT); + bus->cmd |= (state & I2CD_TX_STATE_MASK) << I2CD_TX_STATE_SHIFT; +} + +static uint8_t aspeed_i2c_get_state(AspeedI2CBus *bus) +{ + return (bus->cmd >> I2CD_TX_STATE_SHIFT) & I2CD_TX_STATE_MASK; +} + +/* + * The state machine needs some refinement. It is only used to track + * invalid STOP commands for the moment. + */ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { bus->cmd &= ~0xFFFF; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status = 0; if (bus->cmd & I2CD_M_START_CMD) { + uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ? + I2CD_MSTARTR : I2CD_MSTART; + + aspeed_i2c_set_state(bus, state); + if (i2c_start_transfer(bus->bus, extract32(bus->buf, 1, 7), extract32(bus->buf, 0, 1))) { bus->intr_status |= I2CD_INTR_TX_NAK; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) if (!i2c_bus_busy(bus->bus)) { return; } + aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if (bus->cmd & I2CD_M_TX_CMD) { + aspeed_i2c_set_state(bus, I2CD_MTXD); if (i2c_send(bus->bus, bus->buf)) { - bus->intr_status |= (I2CD_INTR_TX_NAK | I2CD_INTR_ABNORMAL); + bus->intr_status |= (I2CD_INTR_TX_NAK); i2c_end_transfer(bus->bus); } else { bus->intr_status |= I2CD_INTR_TX_ACK; } bus->cmd &= ~I2CD_M_TX_CMD; + aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if (bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST)) { - int ret = i2c_recv(bus->bus); + int ret; + + aspeed_i2c_set_state(bus, I2CD_MRXD); + ret = i2c_recv(bus->bus); if (ret < 0) { qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__); ret = 0xff; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) i2c_nack(bus->bus); } bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST); + aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if (bus->cmd & I2CD_M_STOP_CMD) { - if (!i2c_bus_busy(bus->bus)) { + if (!(aspeed_i2c_get_state(bus) & I2CD_MACTIVE)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: abnormal stop\n", __func__); bus->intr_status |= I2CD_INTR_ABNORMAL; } else { + aspeed_i2c_set_state(bus, I2CD_MSTOP); i2c_end_transfer(bus->bus); bus->intr_status |= I2CD_INTR_NORMAL_STOP; } bus->cmd &= ~I2CD_M_STOP_CMD; + aspeed_i2c_set_state(bus, I2CD_IDLE); } } -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Let's add an RTC to the palmetto BMC and a LM75 temperature sensor to the AST2500 EVB to start with. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-5-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ typedef struct AspeedBoardConfig { const char *fmc_model; const char *spi_model; uint32_t num_cs; + void (*i2c_init)(AspeedBoardState *bmc); } AspeedBoardConfig; enum { @@ -XXX,XX +XXX,XX @@ enum { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +static void palmetto_bmc_i2c_init(AspeedBoardState *bmc); +static void ast2500_evb_i2c_init(AspeedBoardState *bmc); + static const AspeedBoardConfig aspeed_boards[] = { [PALMETTO_BMC] = { .soc_name = "ast2400-a1", @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .fmc_model = "n25q256a", .spi_model = "mx25l25635e", .num_cs = 1, + .i2c_init = palmetto_bmc_i2c_init, }, [AST2500_EVB] = { .soc_name = "ast2500-a1", @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .fmc_model = "n25q256a", .spi_model = "mx25l25635e", .num_cs = 1, + .i2c_init = ast2500_evb_i2c_init, }, [ROMULUS_BMC] = { .soc_name = "ast2500-a1", @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, aspeed_board_binfo.ram_size = ram_size; aspeed_board_binfo.loader_start = sc->info->sdram_base; + if (cfg->i2c_init) { + cfg->i2c_init(bmc); + } + arm_load_kernel(ARM_CPU(first_cpu), &aspeed_board_binfo); } +static void palmetto_bmc_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + /* The palmetto platform expects a ds3231 RTC but a ds1338 is + * enough to provide basic RTC features. Alarms will be missing */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68); +} + static void palmetto_bmc_init(MachineState *machine) { aspeed_board_init(machine, &aspeed_boards[PALMETTO_BMC]); @@ -XXX,XX +XXX,XX @@ static const TypeInfo palmetto_bmc_type = { .class_init = palmetto_bmc_class_init, }; +static void ast2500_evb_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); +} + static void ast2500_evb_init(MachineState *machine) { aspeed_board_init(machine, &aspeed_boards[AST2500_EVB]); -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Largely inspired by the TMP105 temperature sensor, here is a model for the TMP42{1,2,3} temperature sensors. Specs can be found here : http://www.ti.com/lit/gpn/tmp421 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-6-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + hw/misc/tmp421.c | 401 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 3 files changed, 403 insertions(+) create mode 100644 hw/misc/tmp421.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_APPLESMC) += applesmc.o common-obj-$(CONFIG_MAX111X) += max111x.o common-obj-$(CONFIG_TMP105) += tmp105.o +common-obj-$(CONFIG_TMP421) += tmp421.o common-obj-$(CONFIG_ISA_DEBUG) += debugexit.o common-obj-$(CONFIG_SGA) += sga.o common-obj-$(CONFIG_ISA_TESTDEV) += pc-testdev.o diff --git a/hw/misc/tmp421.c b/hw/misc/tmp421.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/tmp421.c @@ -XXX,XX +XXX,XX @@ +/* + * Texas Instruments TMP421 temperature sensor. + * + * Copyright (c) 2016 IBM Corporation. + * + * Largely inspired by : + * + * Texas Instruments TMP105 temperature sensor. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski <andrew@openedhand.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "hw/hw.h" +#include "hw/i2c/i2c.h" +#include "qapi/error.h" +#include "qapi/visitor.h" + +/* Manufacturer / Device ID's */ +#define TMP421_MANUFACTURER_ID 0x55 +#define TMP421_DEVICE_ID 0x21 +#define TMP422_DEVICE_ID 0x22 +#define TMP423_DEVICE_ID 0x23 + +typedef struct DeviceInfo { + int model; + const char *name; +} DeviceInfo; + +static const DeviceInfo devices[] = { + { TMP421_DEVICE_ID, "tmp421" }, + { TMP422_DEVICE_ID, "tmp422" }, + { TMP423_DEVICE_ID, "tmp423" }, +}; + +typedef struct TMP421State { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + + int16_t temperature[4]; + + uint8_t status; + uint8_t config[2]; + uint8_t rate; + + uint8_t len; + uint8_t buf[2]; + uint8_t pointer; + +} TMP421State; + +typedef struct TMP421Class { + I2CSlaveClass parent_class; + DeviceInfo *dev; +} TMP421Class; + +#define TYPE_TMP421 "tmp421-generic" +#define TMP421(obj) OBJECT_CHECK(TMP421State, (obj), TYPE_TMP421) + +#define TMP421_CLASS(klass) \ + OBJECT_CLASS_CHECK(TMP421Class, (klass), TYPE_TMP421) +#define TMP421_GET_CLASS(obj) \ + OBJECT_GET_CLASS(TMP421Class, (obj), TYPE_TMP421) + +/* the TMP421 registers */ +#define TMP421_STATUS_REG 0x08 +#define TMP421_STATUS_BUSY (1 << 7) +#define TMP421_CONFIG_REG_1 0x09 +#define TMP421_CONFIG_RANGE (1 << 2) +#define TMP421_CONFIG_SHUTDOWN (1 << 6) +#define TMP421_CONFIG_REG_2 0x0A +#define TMP421_CONFIG_RC (1 << 2) +#define TMP421_CONFIG_LEN (1 << 3) +#define TMP421_CONFIG_REN (1 << 4) +#define TMP421_CONFIG_REN2 (1 << 5) +#define TMP421_CONFIG_REN3 (1 << 6) + +#define TMP421_CONVERSION_RATE_REG 0x0B +#define TMP421_ONE_SHOT 0x0F + +#define TMP421_RESET 0xFC +#define TMP421_MANUFACTURER_ID_REG 0xFE +#define TMP421_DEVICE_ID_REG 0xFF + +#define TMP421_TEMP_MSB0 0x00 +#define TMP421_TEMP_MSB1 0x01 +#define TMP421_TEMP_MSB2 0x02 +#define TMP421_TEMP_MSB3 0x03 +#define TMP421_TEMP_LSB0 0x10 +#define TMP421_TEMP_LSB1 0x11 +#define TMP421_TEMP_LSB2 0x12 +#define TMP421_TEMP_LSB3 0x13 + +static const int32_t mins[2] = { -40000, -55000 }; +static const int32_t maxs[2] = { 127000, 150000 }; + +static void tmp421_get_temperature(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + TMP421State *s = TMP421(obj); + bool ext_range = (s->config[0] & TMP421_CONFIG_RANGE); + int offset = ext_range * 64 * 256; + int64_t value; + int tempid; + + if (sscanf(name, "temperature%d", &tempid) != 1) { + error_setg(errp, "error reading %s: %m", name); + return; + } + + if (tempid >= 4 || tempid < 0) { + error_setg(errp, "error reading %s", name); + return; + } + + value = ((s->temperature[tempid] - offset) * 1000 + 128) / 256; + + visit_type_int(v, name, &value, errp); +} + +/* Units are 0.001 centigrades relative to 0 C. s->temperature is 8.8 + * fixed point, so units are 1/256 centigrades. A simple ratio will do. + */ +static void tmp421_set_temperature(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + TMP421State *s = TMP421(obj); + Error *local_err = NULL; + int64_t temp; + bool ext_range = (s->config[0] & TMP421_CONFIG_RANGE); + int offset = ext_range * 64 * 256; + int tempid; + + visit_type_int(v, name, &temp, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + + if (temp >= maxs[ext_range] || temp < mins[ext_range]) { + error_setg(errp, "value %" PRId64 ".%03" PRIu64 " °C is out of range", + temp / 1000, temp % 1000); + return; + } + + if (sscanf(name, "temperature%d", &tempid) != 1) { + error_setg(errp, "error reading %s: %m", name); + return; + } + + if (tempid >= 4 || tempid < 0) { + error_setg(errp, "error reading %s", name); + return; + } + + s->temperature[tempid] = (int16_t) ((temp * 256 - 128) / 1000) + offset; +} + +static void tmp421_read(TMP421State *s) +{ + TMP421Class *sc = TMP421_GET_CLASS(s); + + s->len = 0; + + switch (s->pointer) { + case TMP421_MANUFACTURER_ID_REG: + s->buf[s->len++] = TMP421_MANUFACTURER_ID; + break; + case TMP421_DEVICE_ID_REG: + s->buf[s->len++] = sc->dev->model; + break; + case TMP421_CONFIG_REG_1: + s->buf[s->len++] = s->config[0]; + break; + case TMP421_CONFIG_REG_2: + s->buf[s->len++] = s->config[1]; + break; + case TMP421_CONVERSION_RATE_REG: + s->buf[s->len++] = s->rate; + break; + case TMP421_STATUS_REG: + s->buf[s->len++] = s->status; + break; + + /* FIXME: check for channel enablement in config registers */ + case TMP421_TEMP_MSB0: + s->buf[s->len++] = (((uint16_t) s->temperature[0]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[0]) >> 0) & 0xf0; + break; + case TMP421_TEMP_MSB1: + s->buf[s->len++] = (((uint16_t) s->temperature[1]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[1]) >> 0) & 0xf0; + break; + case TMP421_TEMP_MSB2: + s->buf[s->len++] = (((uint16_t) s->temperature[2]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[2]) >> 0) & 0xf0; + break; + case TMP421_TEMP_MSB3: + s->buf[s->len++] = (((uint16_t) s->temperature[3]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[3]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB0: + s->buf[s->len++] = (((uint16_t) s->temperature[0]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB1: + s->buf[s->len++] = (((uint16_t) s->temperature[1]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB2: + s->buf[s->len++] = (((uint16_t) s->temperature[2]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB3: + s->buf[s->len++] = (((uint16_t) s->temperature[3]) >> 0) & 0xf0; + break; + } +} + +static void tmp421_reset(I2CSlave *i2c); + +static void tmp421_write(TMP421State *s) +{ + switch (s->pointer) { + case TMP421_CONVERSION_RATE_REG: + s->rate = s->buf[0]; + break; + case TMP421_CONFIG_REG_1: + s->config[0] = s->buf[0]; + break; + case TMP421_CONFIG_REG_2: + s->config[1] = s->buf[0]; + break; + case TMP421_RESET: + tmp421_reset(I2C_SLAVE(s)); + break; + } +} + +static int tmp421_rx(I2CSlave *i2c) +{ + TMP421State *s = TMP421(i2c); + + if (s->len < 2) { + return s->buf[s->len++]; + } else { + return 0xff; + } +} + +static int tmp421_tx(I2CSlave *i2c, uint8_t data) +{ + TMP421State *s = TMP421(i2c); + + if (s->len == 0) { + /* first byte is the register pointer for a read or write + * operation */ + s->pointer = data; + s->len++; + } else if (s->len == 1) { + /* second byte is the data to write. The device only supports + * one byte writes */ + s->buf[0] = data; + tmp421_write(s); + } + + return 0; +} + +static int tmp421_event(I2CSlave *i2c, enum i2c_event event) +{ + TMP421State *s = TMP421(i2c); + + if (event == I2C_START_RECV) { + tmp421_read(s); + } + + s->len = 0; + return 0; +} + +static const VMStateDescription vmstate_tmp421 = { + .name = "TMP421", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(len, TMP421State), + VMSTATE_UINT8_ARRAY(buf, TMP421State, 2), + VMSTATE_UINT8(pointer, TMP421State), + VMSTATE_UINT8_ARRAY(config, TMP421State, 2), + VMSTATE_UINT8(status, TMP421State), + VMSTATE_UINT8(rate, TMP421State), + VMSTATE_INT16_ARRAY(temperature, TMP421State, 4), + VMSTATE_I2C_SLAVE(i2c, TMP421State), + VMSTATE_END_OF_LIST() + } +}; + +static void tmp421_reset(I2CSlave *i2c) +{ + TMP421State *s = TMP421(i2c); + TMP421Class *sc = TMP421_GET_CLASS(s); + + memset(s->temperature, 0, sizeof(s->temperature)); + s->pointer = 0; + + s->config[0] = 0; /* TMP421_CONFIG_RANGE */ + + /* resistance correction and channel enablement */ + switch (sc->dev->model) { + case TMP421_DEVICE_ID: + s->config[1] = 0x1c; + break; + case TMP422_DEVICE_ID: + s->config[1] = 0x3c; + break; + case TMP423_DEVICE_ID: + s->config[1] = 0x7c; + break; + } + + s->rate = 0x7; /* 8Hz */ + s->status = 0; +} + +static int tmp421_init(I2CSlave *i2c) +{ + TMP421State *s = TMP421(i2c); + + tmp421_reset(&s->i2c); + + return 0; +} + +static void tmp421_initfn(Object *obj) +{ + object_property_add(obj, "temperature0", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); + object_property_add(obj, "temperature1", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); + object_property_add(obj, "temperature2", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); + object_property_add(obj, "temperature3", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); +} + +static void tmp421_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + TMP421Class *sc = TMP421_CLASS(klass); + + k->init = tmp421_init; + k->event = tmp421_event; + k->recv = tmp421_rx; + k->send = tmp421_tx; + dc->vmsd = &vmstate_tmp421; + sc->dev = (DeviceInfo *) data; +} + +static const TypeInfo tmp421_info = { + .name = TYPE_TMP421, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(TMP421State), + .instance_init = tmp421_initfn, + .class_init = tmp421_class_init, +}; + +static void tmp421_register_types(void) +{ + int i; + + type_register_static(&tmp421_info); + for (i = 0; i < ARRAY_SIZE(devices); ++i) { + TypeInfo ti = { + .name = devices[i].name, + .parent = TYPE_TMP421, + .class_init = tmp421_class_init, + .class_data = (void *) &devices[i], + }; + type_register(&ti); + } +} + +type_init(tmp421_register_types) diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_TWL92230=y CONFIG_TSC2005=y CONFIG_LM832X=y CONFIG_TMP105=y +CONFIG_TMP421=y CONFIG_STELLARIS=y CONFIG_STELLARIS_INPUT=y CONFIG_STELLARIS_ENET=y -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Temperatures can be changed from the monitor with : (qemu) qom-set /machine/unattached/device[2] temperature0 12000 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-7-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, static void palmetto_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; + DeviceState *dev; /* The palmetto platform expects a ds3231 RTC but a ds1338 is * enough to provide basic RTC features. Alarms will be missing */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68); + + /* add a TMP423 temperature sensor */ + dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2), + "tmp423", 0x4c); + object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort); + object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort); + object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort); + object_property_set_int(OBJECT(dev), 110000, "temperature3", &error_abort); } static void palmetto_bmc_init(MachineState *machine) -- 2.7.4 From: Andrew Jones <drjones@redhat.com> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 20170529173751.3443-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) if (nb_numa_nodes > 0) { acpi_add_table(table_offsets, tables_blob); build_srat(tables_blob, tables->linker, vms); + if (have_numa_distance) { + acpi_add_table(table_offsets, tables_blob); + build_slit(tables_blob, tables->linker); + } } if (its_class_name() && !vmc->no_its) { -- 2.7.4 From: Andrew Jones <drjones@redhat.com> This is based on patch Shannon Zhao originally posted. Cc: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 20170529173751.3443-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(VirtMachineState *vms) "clk24mhz"); qemu_fdt_setprop_cell(fdt, "/apb-pclk", "phandle", vms->clock_phandle); + if (have_numa_distance) { + int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t); + uint32_t *matrix = g_malloc0(size); + int idx, i, j; + + for (i = 0; i < nb_numa_nodes; i++) { + for (j = 0; j < nb_numa_nodes; j++) { + idx = (i * nb_numa_nodes + j) * 3; + matrix[idx + 0] = cpu_to_be32(i); + matrix[idx + 1] = cpu_to_be32(j); + matrix[idx + 2] = cpu_to_be32(numa_info[i].distance[j]); + } + } + + qemu_fdt_add_subnode(fdt, "/distance-map"); + qemu_fdt_setprop_string(fdt, "/distance-map", "compatible", + "numa-distance-map-v1"); + qemu_fdt_setprop(fdt, "/distance-map", "distance-matrix", + matrix, size); + g_free(matrix); + } } static void fdt_add_psci_node(const VirtMachineState *vms) -- 2.7.4 First pullreq for 6.0: mostly my v8.1M work, plus some other bits and pieces. (I still have a lot of stuff in my to-review folder, which I may or may not get to before the Christmas break...) thanks -- PMM The following changes since commit 5e7b204dbfae9a562fc73684986f936b97f63877: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2020-12-09 20:08:54 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201210 for you to fetch changes up to 71f916be1c7e9ede0e37d9cabc781b5a9e8638ff: hw/arm/armv7m: Correct typo in QOM object name (2020-12-10 11:44:56 +0000) ---------------------------------------------------------------- target-arm queue: * hw/arm/smmuv3: Fix up L1STD_SPAN decoding * xlnx-zynqmp: Support Xilinx ZynqMP CAN controllers * sbsa-ref: allow to use Cortex-A53/57/72 cpus * Various minor code cleanups * hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault * Implement more pieces of ARMv8.1M support ---------------------------------------------------------------- Alex Chen (4): i.MX25: Fix bad printf format specifiers i.MX31: Fix bad printf format specifiers i.MX6: Fix bad printf format specifiers i.MX6ul: Fix bad printf format specifiers Havard Skinnemoen (1): tests/qtest/npcm7xx_rng-test: dump random data on failure Kunkun Jiang (1): hw/arm/smmuv3: Fix up L1STD_SPAN decoding Marcin Juszkiewicz (1): sbsa-ref: allow to use Cortex-A53/57/72 cpus Peter Maydell (25): hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault target/arm: Implement v8.1M PXN extension target/arm: Don't clobber ID_PFR1.Security on M-profile cores target/arm: Implement VSCCLRM insn target/arm: Implement CLRM instruction target/arm: Enforce M-profile VMRS/VMSR register restrictions target/arm: Refactor M-profile VMSR/VMRS handling target/arm: Move general-use constant expanders up in translate.c target/arm: Implement VLDR/VSTR system register target/arm: Implement M-profile FPSCR_nzcvqc target/arm: Use new FPCR_NZCV_MASK constant target/arm: Factor out preserve-fp-state from full_vfp_access_check() target/arm: Implement FPCXT_S fp system register hw/intc/armv7m_nvic: Update FPDSCR masking for v8.1M target/arm: For v8.1M, always clear R0-R3, R12, APSR, EPSR on exception entry target/arm: In v8.1M, don't set HFSR.FORCED on vector table fetch failures target/arm: Implement v8.1M REVIDR register target/arm: Implement new v8.1M NOCP check for exception return target/arm: Implement new v8.1M VLLDM and VLSTM encodings hw/intc/armv7m_nvic: Support v8.1M CCR.TRD bit target/arm: Implement CCR_S.TRD behaviour for SG insns hw/intc/armv7m_nvic: Fix "return from inactive handler" check target/arm: Implement M-profile "minimal RAS implementation" hw/intc/armv7m_nvic: Implement read/write for RAS register block hw/arm/armv7m: Correct typo in QOM object name Vikram Garhwal (4): hw/net/can: Introduce Xilinx ZynqMP CAN controller xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller MAINTAINERS: Add maintainer entry for Xilinx ZynqMP CAN controller meson.build | 1 + hw/arm/smmuv3-internal.h | 2 +- hw/net/can/trace.h | 1 + include/hw/arm/xlnx-zynqmp.h | 8 + include/hw/intc/armv7m_nvic.h | 2 + include/hw/net/xlnx-zynqmp-can.h | 78 +++ target/arm/cpu.h | 46 ++ target/arm/m-nocp.decode | 10 +- target/arm/t32.decode | 10 +- target/arm/vfp.decode | 14 + hw/arm/armv7m.c | 4 +- hw/arm/sbsa-ref.c | 23 +- hw/arm/xlnx-zcu102.c | 20 + hw/arm/xlnx-zynqmp.c | 34 ++ hw/intc/armv7m_nvic.c | 246 ++++++-- hw/misc/imx25_ccm.c | 12 +- hw/misc/imx31_ccm.c | 14 +- hw/misc/imx6_ccm.c | 20 +- hw/misc/imx6_src.c | 2 +- hw/misc/imx6ul_ccm.c | 4 +- hw/misc/imx_ccm.c | 4 +- hw/net/can/xlnx-zynqmp-can.c | 1161 ++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 +- target/arm/helper.c | 7 +- target/arm/m_helper.c | 130 ++++- target/arm/translate.c | 105 +++- tests/qtest/npcm7xx_rng-test.c | 12 + tests/qtest/xlnx-can-test.c | 360 ++++++++++++ MAINTAINERS | 8 + hw/Kconfig | 1 + hw/net/can/meson.build | 1 + hw/net/can/trace-events | 9 + target/arm/translate-vfp.c.inc | 511 ++++++++++++++++- tests/qtest/meson.build | 1 + 34 files changed, 2713 insertions(+), 153 deletions(-) create mode 100644 hw/net/can/trace.h create mode 100644 include/hw/net/xlnx-zynqmp-can.h create mode 100644 hw/net/can/xlnx-zynqmp-can.c create mode 100644 tests/qtest/xlnx-can-test.c create mode 100644 hw/net/can/trace-events From: Kunkun Jiang <jiangkunkun@huawei.com> Accroding to the SMMUv3 spec, the SPAN field of Level1 Stream Table Descriptor is 5 bits([4:0]). Fixes: 9bde7f0674f(hw/arm/smmuv3: Implement translate callback) Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> Message-id: 20201124023711.1184-1-jiangkunkun@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t l1std_l2ptr(STEDesc *desc) return hi << 32 | lo; } -#define L1STD_SPAN(stm) (extract32((stm)->word[0], 0, 4)) +#define L1STD_SPAN(stm) (extract32((stm)->word[0], 0, 5)) #endif -- 2.20.1 From: Vikram Garhwal <fnu.vikram@xilinx.com> The Xilinx ZynqMP CAN controller is developed based on SocketCAN, QEMU CAN bus implementation. Bus connection and socketCAN connection for each CAN module can be set through command lines. Example for using single CAN: -object can-bus,id=canbus0 \ -machine xlnx-zcu102.canbus0=canbus0 \ -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0 Example for connecting both CAN to same virtual CAN on host machine: -object can-bus,id=canbus0 -object can-bus,id=canbus1 \ -machine xlnx-zcu102.canbus0=canbus0 \ -machine xlnx-zcu102.canbus1=canbus1 \ -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0 \ -object can-host-socketcan,id=socketcan1,if=vcan0,canbus=canbus1 To create virtual CAN on the host machine, please check the QEMU CAN docs: https://github.com/qemu/qemu/blob/master/docs/can.txt Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-id: 1605728926-352690-2-git-send-email-fnu.vikram@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + hw/net/can/trace.h | 1 + include/hw/net/xlnx-zynqmp-can.h | 78 ++ hw/net/can/xlnx-zynqmp-can.c | 1161 ++++++++++++++++++++++++++++++ hw/Kconfig | 1 + hw/net/can/meson.build | 1 + hw/net/can/trace-events | 9 + 7 files changed, 1252 insertions(+) create mode 100644 hw/net/can/trace.h create mode 100644 include/hw/net/xlnx-zynqmp-can.h create mode 100644 hw/net/can/xlnx-zynqmp-can.c create mode 100644 hw/net/can/trace-events diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ if have_system 'hw/misc', 'hw/misc/macio', 'hw/net', + 'hw/net/can', 'hw/nvram', 'hw/pci', 'hw/pci-host', diff --git a/hw/net/can/trace.h b/hw/net/can/trace.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/can/trace.h @@ -0,0 +1 @@ +#include "trace/trace-hw_net_can.h" diff --git a/include/hw/net/xlnx-zynqmp-can.h b/include/hw/net/xlnx-zynqmp-can.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/xlnx-zynqmp-can.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP CAN controller. + * + * Copyright (c) 2020 Xilinx Inc. + * + * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com> + * + * Based on QEMU CAN Device emulation implemented by Jin Yang, Deniz Eren and + * Pavel Pisa. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef XLNX_ZYNQMP_CAN_H +#define XLNX_ZYNQMP_CAN_H + +#include "hw/register.h" +#include "net/can_emu.h" +#include "net/can_host.h" +#include "qemu/fifo32.h" +#include "hw/ptimer.h" +#include "hw/qdev-clock.h" + +#define TYPE_XLNX_ZYNQMP_CAN "xlnx.zynqmp-can" + +#define XLNX_ZYNQMP_CAN(obj) \ + OBJECT_CHECK(XlnxZynqMPCANState, (obj), TYPE_XLNX_ZYNQMP_CAN) + +#define MAX_CAN_CTRLS 2 +#define XLNX_ZYNQMP_CAN_R_MAX (0x84 / 4) +#define MAILBOX_CAPACITY 64 +#define CAN_TIMER_MAX 0XFFFFUL +#define CAN_DEFAULT_CLOCK (24 * 1000 * 1000) + +/* Each CAN_FRAME will have 4 * 32bit size. */ +#define CAN_FRAME_SIZE 4 +#define RXFIFO_SIZE (MAILBOX_CAPACITY * CAN_FRAME_SIZE) + +typedef struct XlnxZynqMPCANState { + SysBusDevice parent_obj; + MemoryRegion iomem; + + qemu_irq irq; + + CanBusClientState bus_client; + CanBusState *canbus; + + struct { + uint32_t ext_clk_freq; + } cfg; + + RegisterInfo reg_info[XLNX_ZYNQMP_CAN_R_MAX]; + uint32_t regs[XLNX_ZYNQMP_CAN_R_MAX]; + + Fifo32 rx_fifo; + Fifo32 tx_fifo; + Fifo32 txhpb_fifo; + + ptimer_state *can_timer; +} XlnxZynqMPCANState; + +#endif diff --git a/hw/net/can/xlnx-zynqmp-can.c b/hw/net/can/xlnx-zynqmp-can.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/can/xlnx-zynqmp-can.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP CAN controller. + * This implementation is based on the following datasheet: + * https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf + * + * Copyright (c) 2020 Xilinx Inc. + * + * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com> + * + * Based on QEMU CAN Device emulation implemented by Jin Yang, Deniz Eren and + * Pavel Pisa + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/register.h" +#include "hw/irq.h" +#include "qapi/error.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qemu/cutils.h" +#include "sysemu/sysemu.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" +#include "net/can_emu.h" +#include "net/can_host.h" +#include "qemu/event_notifier.h" +#include "qom/object_interfaces.h" +#include "hw/net/xlnx-zynqmp-can.h" +#include "trace.h" + +#ifndef XLNX_ZYNQMP_CAN_ERR_DEBUG +#define XLNX_ZYNQMP_CAN_ERR_DEBUG 0 +#endif + +#define MAX_DLC 8 +#undef ERROR + +REG32(SOFTWARE_RESET_REGISTER, 0x0) + FIELD(SOFTWARE_RESET_REGISTER, CEN, 1, 1) + FIELD(SOFTWARE_RESET_REGISTER, SRST, 0, 1) +REG32(MODE_SELECT_REGISTER, 0x4) + FIELD(MODE_SELECT_REGISTER, SNOOP, 2, 1) + FIELD(MODE_SELECT_REGISTER, LBACK, 1, 1) + FIELD(MODE_SELECT_REGISTER, SLEEP, 0, 1) +REG32(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, 0x8) + FIELD(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, BRP, 0, 8) +REG32(ARBITRATION_PHASE_BIT_TIMING_REGISTER, 0xc) + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, SJW, 7, 2) + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS2, 4, 3) + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS1, 0, 4) +REG32(ERROR_COUNTER_REGISTER, 0x10) + FIELD(ERROR_COUNTER_REGISTER, REC, 8, 8) + FIELD(ERROR_COUNTER_REGISTER, TEC, 0, 8) +REG32(ERROR_STATUS_REGISTER, 0x14) + FIELD(ERROR_STATUS_REGISTER, ACKER, 4, 1) + FIELD(ERROR_STATUS_REGISTER, BERR, 3, 1) + FIELD(ERROR_STATUS_REGISTER, STER, 2, 1) + FIELD(ERROR_STATUS_REGISTER, FMER, 1, 1) + FIELD(ERROR_STATUS_REGISTER, CRCER, 0, 1) +REG32(STATUS_REGISTER, 0x18) + FIELD(STATUS_REGISTER, SNOOP, 12, 1) + FIELD(STATUS_REGISTER, ACFBSY, 11, 1) + FIELD(STATUS_REGISTER, TXFLL, 10, 1) + FIELD(STATUS_REGISTER, TXBFLL, 9, 1) + FIELD(STATUS_REGISTER, ESTAT, 7, 2) + FIELD(STATUS_REGISTER, ERRWRN, 6, 1) + FIELD(STATUS_REGISTER, BBSY, 5, 1) + FIELD(STATUS_REGISTER, BIDLE, 4, 1) + FIELD(STATUS_REGISTER, NORMAL, 3, 1) + FIELD(STATUS_REGISTER, SLEEP, 2, 1) + FIELD(STATUS_REGISTER, LBACK, 1, 1) + FIELD(STATUS_REGISTER, CONFIG, 0, 1) +REG32(INTERRUPT_STATUS_REGISTER, 0x1c) + FIELD(INTERRUPT_STATUS_REGISTER, TXFEMP, 14, 1) + FIELD(INTERRUPT_STATUS_REGISTER, TXFWMEMP, 13, 1) + FIELD(INTERRUPT_STATUS_REGISTER, RXFWMFLL, 12, 1) + FIELD(INTERRUPT_STATUS_REGISTER, WKUP, 11, 1) + FIELD(INTERRUPT_STATUS_REGISTER, SLP, 10, 1) + FIELD(INTERRUPT_STATUS_REGISTER, BSOFF, 9, 1) + FIELD(INTERRUPT_STATUS_REGISTER, ERROR, 8, 1) + FIELD(INTERRUPT_STATUS_REGISTER, RXNEMP, 7, 1) + FIELD(INTERRUPT_STATUS_REGISTER, RXOFLW, 6, 1) + FIELD(INTERRUPT_STATUS_REGISTER, RXUFLW, 5, 1) + FIELD(INTERRUPT_STATUS_REGISTER, RXOK, 4, 1) + FIELD(INTERRUPT_STATUS_REGISTER, TXBFLL, 3, 1) + FIELD(INTERRUPT_STATUS_REGISTER, TXFLL, 2, 1) + FIELD(INTERRUPT_STATUS_REGISTER, TXOK, 1, 1) + FIELD(INTERRUPT_STATUS_REGISTER, ARBLST, 0, 1) +REG32(INTERRUPT_ENABLE_REGISTER, 0x20) + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFEMP, 14, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFWMEMP, 13, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ERXFWMFLL, 12, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, EWKUP, 11, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ESLP, 10, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, EBSOFF, 9, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, EERROR, 8, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ERXNEMP, 7, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ERXOFLW, 6, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ERXUFLW, 5, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ERXOK, 4, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ETXBFLL, 3, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFLL, 2, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, ETXOK, 1, 1) + FIELD(INTERRUPT_ENABLE_REGISTER, EARBLST, 0, 1) +REG32(INTERRUPT_CLEAR_REGISTER, 0x24) + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFEMP, 14, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFWMEMP, 13, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CRXFWMFLL, 12, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CWKUP, 11, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CSLP, 10, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CBSOFF, 9, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CERROR, 8, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CRXNEMP, 7, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CRXOFLW, 6, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CRXUFLW, 5, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CRXOK, 4, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CTXBFLL, 3, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFLL, 2, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CTXOK, 1, 1) + FIELD(INTERRUPT_CLEAR_REGISTER, CARBLST, 0, 1) +REG32(TIMESTAMP_REGISTER, 0x28) + FIELD(TIMESTAMP_REGISTER, CTS, 0, 1) +REG32(WIR, 0x2c) + FIELD(WIR, EW, 8, 8) + FIELD(WIR, FW, 0, 8) +REG32(TXFIFO_ID, 0x30) + FIELD(TXFIFO_ID, IDH, 21, 11) + FIELD(TXFIFO_ID, SRRRTR, 20, 1) + FIELD(TXFIFO_ID, IDE, 19, 1) + FIELD(TXFIFO_ID, IDL, 1, 18) + FIELD(TXFIFO_ID, RTR, 0, 1) +REG32(TXFIFO_DLC, 0x34) + FIELD(TXFIFO_DLC, DLC, 28, 4) +REG32(TXFIFO_DATA1, 0x38) + FIELD(TXFIFO_DATA1, DB0, 24, 8) + FIELD(TXFIFO_DATA1, DB1, 16, 8) + FIELD(TXFIFO_DATA1, DB2, 8, 8) + FIELD(TXFIFO_DATA1, DB3, 0, 8) +REG32(TXFIFO_DATA2, 0x3c) + FIELD(TXFIFO_DATA2, DB4, 24, 8) + FIELD(TXFIFO_DATA2, DB5, 16, 8) + FIELD(TXFIFO_DATA2, DB6, 8, 8) + FIELD(TXFIFO_DATA2, DB7, 0, 8) +REG32(TXHPB_ID, 0x40) + FIELD(TXHPB_ID, IDH, 21, 11) + FIELD(TXHPB_ID, SRRRTR, 20, 1) + FIELD(TXHPB_ID, IDE, 19, 1) + FIELD(TXHPB_ID, IDL, 1, 18) + FIELD(TXHPB_ID, RTR, 0, 1) +REG32(TXHPB_DLC, 0x44) + FIELD(TXHPB_DLC, DLC, 28, 4) +REG32(TXHPB_DATA1, 0x48) + FIELD(TXHPB_DATA1, DB0, 24, 8) + FIELD(TXHPB_DATA1, DB1, 16, 8) + FIELD(TXHPB_DATA1, DB2, 8, 8) + FIELD(TXHPB_DATA1, DB3, 0, 8) +REG32(TXHPB_DATA2, 0x4c) + FIELD(TXHPB_DATA2, DB4, 24, 8) + FIELD(TXHPB_DATA2, DB5, 16, 8) + FIELD(TXHPB_DATA2, DB6, 8, 8) + FIELD(TXHPB_DATA2, DB7, 0, 8) +REG32(RXFIFO_ID, 0x50) + FIELD(RXFIFO_ID, IDH, 21, 11) + FIELD(RXFIFO_ID, SRRRTR, 20, 1) + FIELD(RXFIFO_ID, IDE, 19, 1) + FIELD(RXFIFO_ID, IDL, 1, 18) + FIELD(RXFIFO_ID, RTR, 0, 1) +REG32(RXFIFO_DLC, 0x54) + FIELD(RXFIFO_DLC, DLC, 28, 4) + FIELD(RXFIFO_DLC, RXT, 0, 16) +REG32(RXFIFO_DATA1, 0x58) + FIELD(RXFIFO_DATA1, DB0, 24, 8) + FIELD(RXFIFO_DATA1, DB1, 16, 8) + FIELD(RXFIFO_DATA1, DB2, 8, 8) + FIELD(RXFIFO_DATA1, DB3, 0, 8) +REG32(RXFIFO_DATA2, 0x5c) + FIELD(RXFIFO_DATA2, DB4, 24, 8) + FIELD(RXFIFO_DATA2, DB5, 16, 8) + FIELD(RXFIFO_DATA2, DB6, 8, 8) + FIELD(RXFIFO_DATA2, DB7, 0, 8) +REG32(AFR, 0x60) + FIELD(AFR, UAF4, 3, 1) + FIELD(AFR, UAF3, 2, 1) + FIELD(AFR, UAF2, 1, 1) + FIELD(AFR, UAF1, 0, 1) +REG32(AFMR1, 0x64) + FIELD(AFMR1, AMIDH, 21, 11) + FIELD(AFMR1, AMSRR, 20, 1) + FIELD(AFMR1, AMIDE, 19, 1) + FIELD(AFMR1, AMIDL, 1, 18) + FIELD(AFMR1, AMRTR, 0, 1) +REG32(AFIR1, 0x68) + FIELD(AFIR1, AIIDH, 21, 11) + FIELD(AFIR1, AISRR, 20, 1) + FIELD(AFIR1, AIIDE, 19, 1) + FIELD(AFIR1, AIIDL, 1, 18) + FIELD(AFIR1, AIRTR, 0, 1) +REG32(AFMR2, 0x6c) + FIELD(AFMR2, AMIDH, 21, 11) + FIELD(AFMR2, AMSRR, 20, 1) + FIELD(AFMR2, AMIDE, 19, 1) + FIELD(AFMR2, AMIDL, 1, 18) + FIELD(AFMR2, AMRTR, 0, 1) +REG32(AFIR2, 0x70) + FIELD(AFIR2, AIIDH, 21, 11) + FIELD(AFIR2, AISRR, 20, 1) + FIELD(AFIR2, AIIDE, 19, 1) + FIELD(AFIR2, AIIDL, 1, 18) + FIELD(AFIR2, AIRTR, 0, 1) +REG32(AFMR3, 0x74) + FIELD(AFMR3, AMIDH, 21, 11) + FIELD(AFMR3, AMSRR, 20, 1) + FIELD(AFMR3, AMIDE, 19, 1) + FIELD(AFMR3, AMIDL, 1, 18) + FIELD(AFMR3, AMRTR, 0, 1) +REG32(AFIR3, 0x78) + FIELD(AFIR3, AIIDH, 21, 11) + FIELD(AFIR3, AISRR, 20, 1) + FIELD(AFIR3, AIIDE, 19, 1) + FIELD(AFIR3, AIIDL, 1, 18) + FIELD(AFIR3, AIRTR, 0, 1) +REG32(AFMR4, 0x7c) + FIELD(AFMR4, AMIDH, 21, 11) + FIELD(AFMR4, AMSRR, 20, 1) + FIELD(AFMR4, AMIDE, 19, 1) + FIELD(AFMR4, AMIDL, 1, 18) + FIELD(AFMR4, AMRTR, 0, 1) +REG32(AFIR4, 0x80) + FIELD(AFIR4, AIIDH, 21, 11) + FIELD(AFIR4, AISRR, 20, 1) + FIELD(AFIR4, AIIDE, 19, 1) + FIELD(AFIR4, AIIDL, 1, 18) + FIELD(AFIR4, AIRTR, 0, 1) + +static void can_update_irq(XlnxZynqMPCANState *s) +{ + uint32_t irq; + + /* Watermark register interrupts. */ + if ((fifo32_num_free(&s->tx_fifo) / CAN_FRAME_SIZE) > + ARRAY_FIELD_EX32(s->regs, WIR, EW)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFWMEMP, 1); + } + + if ((fifo32_num_used(&s->rx_fifo) / CAN_FRAME_SIZE) > + ARRAY_FIELD_EX32(s->regs, WIR, FW)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXFWMFLL, 1); + } + + /* RX Interrupts. */ + if (fifo32_num_used(&s->rx_fifo) >= CAN_FRAME_SIZE) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXNEMP, 1); + } + + /* TX interrupts. */ + if (fifo32_is_empty(&s->tx_fifo)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFEMP, 1); + } + + if (fifo32_is_full(&s->tx_fifo)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFLL, 1); + } + + if (fifo32_is_full(&s->txhpb_fifo)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXBFLL, 1); + } + + irq = s->regs[R_INTERRUPT_STATUS_REGISTER]; + irq &= s->regs[R_INTERRUPT_ENABLE_REGISTER]; + + trace_xlnx_can_update_irq(s->regs[R_INTERRUPT_STATUS_REGISTER], + s->regs[R_INTERRUPT_ENABLE_REGISTER], irq); + qemu_set_irq(s->irq, irq); +} + +static void can_ier_post_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + can_update_irq(s); +} + +static uint64_t can_icr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + s->regs[R_INTERRUPT_STATUS_REGISTER] &= ~val; + can_update_irq(s); + + return 0; +} + +static void can_config_reset(XlnxZynqMPCANState *s) +{ + /* Reset all the configuration registers. */ + register_reset(&s->reg_info[R_SOFTWARE_RESET_REGISTER]); + register_reset(&s->reg_info[R_MODE_SELECT_REGISTER]); + register_reset( + &s->reg_info[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER]); + register_reset(&s->reg_info[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER]); + register_reset(&s->reg_info[R_STATUS_REGISTER]); + register_reset(&s->reg_info[R_INTERRUPT_STATUS_REGISTER]); + register_reset(&s->reg_info[R_INTERRUPT_ENABLE_REGISTER]); + register_reset(&s->reg_info[R_INTERRUPT_CLEAR_REGISTER]); + register_reset(&s->reg_info[R_WIR]); +} + +static void can_config_mode(XlnxZynqMPCANState *s) +{ + register_reset(&s->reg_info[R_ERROR_COUNTER_REGISTER]); + register_reset(&s->reg_info[R_ERROR_STATUS_REGISTER]); + + /* Put XlnxZynqMPCAN in configuration mode. */ + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 1); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, BSOFF, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ERROR, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 0); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ARBLST, 0); + + can_update_irq(s); +} + +static void update_status_register_mode_bits(XlnxZynqMPCANState *s) +{ + bool sleep_status = ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP); + bool sleep_mode = ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SLEEP); + /* Wake up interrupt bit. */ + bool wakeup_irq_val = sleep_status && (sleep_mode == 0); + /* Sleep interrupt bit. */ + bool sleep_irq_val = sleep_mode && (sleep_status == 0); + + /* Clear previous core mode status bits. */ + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 0); + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 0); + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 0); + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 0); + + /* set current mode bit and generate irqs accordingly. */ + if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, LBACK)) { + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 1); + } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SLEEP)) { + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 1); + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP, + sleep_irq_val); + } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SNOOP)) { + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 1); + } else { + /* + * If all bits are zero then XlnxZynqMPCAN is set in normal mode. + */ + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 1); + /* Set wakeup interrupt bit. */ + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP, + wakeup_irq_val); + } + + can_update_irq(s); +} + +static void can_exit_sleep_mode(XlnxZynqMPCANState *s) +{ + ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP, 0); + update_status_register_mode_bits(s); +} + +static void generate_frame(qemu_can_frame *frame, uint32_t *data) +{ + frame->can_id = data[0]; + frame->can_dlc = FIELD_EX32(data[1], TXFIFO_DLC, DLC); + + frame->data[0] = FIELD_EX32(data[2], TXFIFO_DATA1, DB3); + frame->data[1] = FIELD_EX32(data[2], TXFIFO_DATA1, DB2); + frame->data[2] = FIELD_EX32(data[2], TXFIFO_DATA1, DB1); + frame->data[3] = FIELD_EX32(data[2], TXFIFO_DATA1, DB0); + + frame->data[4] = FIELD_EX32(data[3], TXFIFO_DATA2, DB7); + frame->data[5] = FIELD_EX32(data[3], TXFIFO_DATA2, DB6); + frame->data[6] = FIELD_EX32(data[3], TXFIFO_DATA2, DB5); + frame->data[7] = FIELD_EX32(data[3], TXFIFO_DATA2, DB4); +} + +static bool tx_ready_check(XlnxZynqMPCANState *s) +{ + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to transfer data while" + " data while controller is in reset mode.\n", + path); + return false; + } + + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to transfer" + " data while controller is in configuration mode. Reset" + " the core so operations can start fresh.\n", + path); + return false; + } + + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to transfer" + " data while controller is in SNOOP MODE.\n", + path); + return false; + } + + return true; +} + +static void transfer_fifo(XlnxZynqMPCANState *s, Fifo32 *fifo) +{ + qemu_can_frame frame; + uint32_t data[CAN_FRAME_SIZE]; + int i; + bool can_tx = tx_ready_check(s); + + if (!can_tx) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Controller is not enabled for data" + " transfer.\n", path); + can_update_irq(s); + return; + } + + while (!fifo32_is_empty(fifo)) { + for (i = 0; i < CAN_FRAME_SIZE; i++) { + data[i] = fifo32_pop(fifo); + } + + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, LBACK)) { + /* + * Controller is in loopback. In Loopback mode, the CAN core + * transmits a recessive bitstream on to the XlnxZynqMPCAN Bus. + * Any message transmitted is looped back to the RX line and + * acknowledged. The XlnxZynqMPCAN core receives any message + * that it transmits. + */ + if (fifo32_is_full(&s->rx_fifo)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 1); + } else { + for (i = 0; i < CAN_FRAME_SIZE; i++) { + fifo32_push(&s->rx_fifo, data[i]); + } + + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 1); + } + } else { + /* Normal mode Tx. */ + generate_frame(&frame, data); + + trace_xlnx_can_tx_data(frame.can_id, frame.can_dlc, + frame.data[0], frame.data[1], + frame.data[2], frame.data[3], + frame.data[4], frame.data[5], + frame.data[6], frame.data[7]); + can_bus_client_send(&s->bus_client, &frame, 1); + } + } + + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 1); + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, TXBFLL, 0); + + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) { + can_exit_sleep_mode(s); + } + + can_update_irq(s); +} + +static uint64_t can_srr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + ARRAY_FIELD_DP32(s->regs, SOFTWARE_RESET_REGISTER, CEN, + FIELD_EX32(val, SOFTWARE_RESET_REGISTER, CEN)); + + if (FIELD_EX32(val, SOFTWARE_RESET_REGISTER, SRST)) { + trace_xlnx_can_reset(val); + + /* First, core will do software reset then will enter in config mode. */ + can_config_reset(s); + } + + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) { + can_config_mode(s); + } else { + /* + * Leave config mode. Now XlnxZynqMPCAN core will enter normal, + * sleep, snoop or loopback mode depending upon LBACK, SLEEP, SNOOP + * register states. + */ + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 0); + + ptimer_transaction_begin(s->can_timer); + ptimer_set_count(s->can_timer, 0); + ptimer_transaction_commit(s->can_timer); + + /* XlnxZynqMPCAN is out of config mode. It will send pending data. */ + transfer_fifo(s, &s->txhpb_fifo); + transfer_fifo(s, &s->tx_fifo); + } + + update_status_register_mode_bits(s); + + return s->regs[R_SOFTWARE_RESET_REGISTER]; +} + +static uint64_t can_msr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + uint8_t multi_mode; + + /* + * Multiple mode set check. This is done to make sure user doesn't set + * multiple modes. + */ + multi_mode = FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK) + + FIELD_EX32(val, MODE_SELECT_REGISTER, SLEEP) + + FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP); + + if (multi_mode > 1) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to config" + " several modes simultaneously. One mode will be selected" + " according to their priority: LBACK > SLEEP > SNOOP.\n", + path); + } + + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) { + /* We are in configuration mode, any mode can be selected. */ + s->regs[R_MODE_SELECT_REGISTER] = val; + } else { + bool sleep_mode_bit = FIELD_EX32(val, MODE_SELECT_REGISTER, SLEEP); + + ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP, sleep_mode_bit); + + if (FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to set" + " LBACK mode without setting CEN bit as 0.\n", + path); + } else if (FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to set" + " SNOOP mode without setting CEN bit as 0.\n", + path); + } + + update_status_register_mode_bits(s); + } + + return s->regs[R_MODE_SELECT_REGISTER]; +} + +static uint64_t can_brpr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + /* Only allow writes when in config mode. */ + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) { + return s->regs[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER]; + } + + return val; +} + +static uint64_t can_btr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + /* Only allow writes when in config mode. */ + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) { + return s->regs[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER]; + } + + return val; +} + +static uint64_t can_tcr_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + if (FIELD_EX32(val, TIMESTAMP_REGISTER, CTS)) { + ptimer_transaction_begin(s->can_timer); + ptimer_set_count(s->can_timer, 0); + ptimer_transaction_commit(s->can_timer); + } + + return 0; +} + +static void update_rx_fifo(XlnxZynqMPCANState *s, const qemu_can_frame *frame) +{ + bool filter_pass = false; + uint16_t timestamp = 0; + + /* If no filter is enabled. Message will be stored in FIFO. */ + if (!((ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) | + (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) | + (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) | + (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)))) { + filter_pass = true; + } + + /* + * Messages that pass any of the acceptance filters will be stored in + * the RX FIFO. + */ + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) { + uint32_t id_masked = s->regs[R_AFMR1] & frame->can_id; + uint32_t filter_id_masked = s->regs[R_AFMR1] & s->regs[R_AFIR1]; + + if (filter_id_masked == id_masked) { + filter_pass = true; + } + } + + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) { + uint32_t id_masked = s->regs[R_AFMR2] & frame->can_id; + uint32_t filter_id_masked = s->regs[R_AFMR2] & s->regs[R_AFIR2]; + + if (filter_id_masked == id_masked) { + filter_pass = true; + } + } + + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) { + uint32_t id_masked = s->regs[R_AFMR3] & frame->can_id; + uint32_t filter_id_masked = s->regs[R_AFMR3] & s->regs[R_AFIR3]; + + if (filter_id_masked == id_masked) { + filter_pass = true; + } + } + + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) { + uint32_t id_masked = s->regs[R_AFMR4] & frame->can_id; + uint32_t filter_id_masked = s->regs[R_AFMR4] & s->regs[R_AFIR4]; + + if (filter_id_masked == id_masked) { + filter_pass = true; + } + } + + if (!filter_pass) { + trace_xlnx_can_rx_fifo_filter_reject(frame->can_id, frame->can_dlc); + return; + } + + /* Store the message in fifo if it passed through any of the filters. */ + if (filter_pass && frame->can_dlc <= MAX_DLC) { + + if (fifo32_is_full(&s->rx_fifo)) { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 1); + } else { + timestamp = CAN_TIMER_MAX - ptimer_get_count(s->can_timer); + + fifo32_push(&s->rx_fifo, frame->can_id); + + fifo32_push(&s->rx_fifo, deposit32(0, R_RXFIFO_DLC_DLC_SHIFT, + R_RXFIFO_DLC_DLC_LENGTH, + frame->can_dlc) | + deposit32(0, R_RXFIFO_DLC_RXT_SHIFT, + R_RXFIFO_DLC_RXT_LENGTH, + timestamp)); + + /* First 32 bit of the data. */ + fifo32_push(&s->rx_fifo, deposit32(0, R_TXFIFO_DATA1_DB3_SHIFT, + R_TXFIFO_DATA1_DB3_LENGTH, + frame->data[0]) | + deposit32(0, R_TXFIFO_DATA1_DB2_SHIFT, + R_TXFIFO_DATA1_DB2_LENGTH, + frame->data[1]) | + deposit32(0, R_TXFIFO_DATA1_DB1_SHIFT, + R_TXFIFO_DATA1_DB1_LENGTH, + frame->data[2]) | + deposit32(0, R_TXFIFO_DATA1_DB0_SHIFT, + R_TXFIFO_DATA1_DB0_LENGTH, + frame->data[3])); + /* Last 32 bit of the data. */ + fifo32_push(&s->rx_fifo, deposit32(0, R_TXFIFO_DATA2_DB7_SHIFT, + R_TXFIFO_DATA2_DB7_LENGTH, + frame->data[4]) | + deposit32(0, R_TXFIFO_DATA2_DB6_SHIFT, + R_TXFIFO_DATA2_DB6_LENGTH, + frame->data[5]) | + deposit32(0, R_TXFIFO_DATA2_DB5_SHIFT, + R_TXFIFO_DATA2_DB5_LENGTH, + frame->data[6]) | + deposit32(0, R_TXFIFO_DATA2_DB4_SHIFT, + R_TXFIFO_DATA2_DB4_LENGTH, + frame->data[7])); + + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 1); + trace_xlnx_can_rx_data(frame->can_id, frame->can_dlc, + frame->data[0], frame->data[1], + frame->data[2], frame->data[3], + frame->data[4], frame->data[5], + frame->data[6], frame->data[7]); + } + + can_update_irq(s); + } +} + +static uint64_t can_rxfifo_pre_read(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + if (!fifo32_is_empty(&s->rx_fifo)) { + val = fifo32_pop(&s->rx_fifo); + } else { + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXUFLW, 1); + } + + can_update_irq(s); + return val; +} + +static void can_filter_enable_post_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1) && + ARRAY_FIELD_EX32(s->regs, AFR, UAF2) && + ARRAY_FIELD_EX32(s->regs, AFR, UAF3) && + ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) { + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 1); + } else { + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 0); + } +} + +static uint64_t can_filter_mask_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + uint32_t reg_idx = (reg->access->addr) / 4; + uint32_t filter_number = (reg_idx - R_AFMR1) / 2; + + /* modify an acceptance filter, the corresponding UAF bit should be '0'. */ + if (!(s->regs[R_AFR] & (1 << filter_number))) { + s->regs[reg_idx] = val; + + trace_xlnx_can_filter_mask_pre_write(filter_number, s->regs[reg_idx]); + } else { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Acceptance filter %d" + " mask is not set as corresponding UAF bit is not 0.\n", + path, filter_number + 1); + } + + return s->regs[reg_idx]; +} + +static uint64_t can_filter_id_pre_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + uint32_t reg_idx = (reg->access->addr) / 4; + uint32_t filter_number = (reg_idx - R_AFIR1) / 2; + + if (!(s->regs[R_AFR] & (1 << filter_number))) { + s->regs[reg_idx] = val; + + trace_xlnx_can_filter_id_pre_write(filter_number, s->regs[reg_idx]); + } else { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Acceptance filter %d" + " id is not set as corresponding UAF bit is not 0.\n", + path, filter_number + 1); + } + + return s->regs[reg_idx]; +} + +static void can_tx_post_write(RegisterInfo *reg, uint64_t val) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque); + + bool is_txhpb = reg->access->addr > A_TXFIFO_DATA2; + + bool initiate_transfer = (reg->access->addr == A_TXFIFO_DATA2) || + (reg->access->addr == A_TXHPB_DATA2); + + Fifo32 *f = is_txhpb ? &s->txhpb_fifo : &s->tx_fifo; + + if (!fifo32_is_full(f)) { + fifo32_push(f, val); + } else { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: TX FIFO is full.\n", path); + } + + /* Initiate the message send if TX register is written. */ + if (initiate_transfer && + ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) { + transfer_fifo(s, f); + } + + can_update_irq(s); +} + +static const RegisterAccessInfo can_regs_info[] = { + { .name = "SOFTWARE_RESET_REGISTER", + .addr = A_SOFTWARE_RESET_REGISTER, + .rsvd = 0xfffffffc, + .pre_write = can_srr_pre_write, + },{ .name = "MODE_SELECT_REGISTER", + .addr = A_MODE_SELECT_REGISTER, + .rsvd = 0xfffffff8, + .pre_write = can_msr_pre_write, + },{ .name = "ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER", + .addr = A_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, + .rsvd = 0xffffff00, + .pre_write = can_brpr_pre_write, + },{ .name = "ARBITRATION_PHASE_BIT_TIMING_REGISTER", + .addr = A_ARBITRATION_PHASE_BIT_TIMING_REGISTER, + .rsvd = 0xfffffe00, + .pre_write = can_btr_pre_write, + },{ .name = "ERROR_COUNTER_REGISTER", + .addr = A_ERROR_COUNTER_REGISTER, + .rsvd = 0xffff0000, + .ro = 0xffffffff, + },{ .name = "ERROR_STATUS_REGISTER", + .addr = A_ERROR_STATUS_REGISTER, + .rsvd = 0xffffffe0, + .w1c = 0x1f, + },{ .name = "STATUS_REGISTER", .addr = A_STATUS_REGISTER, + .reset = 0x1, + .rsvd = 0xffffe000, + .ro = 0x1fff, + },{ .name = "INTERRUPT_STATUS_REGISTER", + .addr = A_INTERRUPT_STATUS_REGISTER, + .reset = 0x6000, + .rsvd = 0xffff8000, + .ro = 0x7fff, + },{ .name = "INTERRUPT_ENABLE_REGISTER", + .addr = A_INTERRUPT_ENABLE_REGISTER, + .rsvd = 0xffff8000, + .post_write = can_ier_post_write, + },{ .name = "INTERRUPT_CLEAR_REGISTER", + .addr = A_INTERRUPT_CLEAR_REGISTER, + .rsvd = 0xffff8000, + .pre_write = can_icr_pre_write, + },{ .name = "TIMESTAMP_REGISTER", + .addr = A_TIMESTAMP_REGISTER, + .rsvd = 0xfffffffe, + .pre_write = can_tcr_pre_write, + },{ .name = "WIR", .addr = A_WIR, + .reset = 0x3f3f, + .rsvd = 0xffff0000, + },{ .name = "TXFIFO_ID", .addr = A_TXFIFO_ID, + .post_write = can_tx_post_write, + },{ .name = "TXFIFO_DLC", .addr = A_TXFIFO_DLC, + .rsvd = 0xfffffff, + .post_write = can_tx_post_write, + },{ .name = "TXFIFO_DATA1", .addr = A_TXFIFO_DATA1, + .post_write = can_tx_post_write, + },{ .name = "TXFIFO_DATA2", .addr = A_TXFIFO_DATA2, + .post_write = can_tx_post_write, + },{ .name = "TXHPB_ID", .addr = A_TXHPB_ID, + .post_write = can_tx_post_write, + },{ .name = "TXHPB_DLC", .addr = A_TXHPB_DLC, + .rsvd = 0xfffffff, + .post_write = can_tx_post_write, + },{ .name = "TXHPB_DATA1", .addr = A_TXHPB_DATA1, + .post_write = can_tx_post_write, + },{ .name = "TXHPB_DATA2", .addr = A_TXHPB_DATA2, + .post_write = can_tx_post_write, + },{ .name = "RXFIFO_ID", .addr = A_RXFIFO_ID, + .ro = 0xffffffff, + .post_read = can_rxfifo_pre_read, + },{ .name = "RXFIFO_DLC", .addr = A_RXFIFO_DLC, + .rsvd = 0xfff0000, + .post_read = can_rxfifo_pre_read, + },{ .name = "RXFIFO_DATA1", .addr = A_RXFIFO_DATA1, + .post_read = can_rxfifo_pre_read, + },{ .name = "RXFIFO_DATA2", .addr = A_RXFIFO_DATA2, + .post_read = can_rxfifo_pre_read, + },{ .name = "AFR", .addr = A_AFR, + .rsvd = 0xfffffff0, + .post_write = can_filter_enable_post_write, + },{ .name = "AFMR1", .addr = A_AFMR1, + .pre_write = can_filter_mask_pre_write, + },{ .name = "AFIR1", .addr = A_AFIR1, + .pre_write = can_filter_id_pre_write, + },{ .name = "AFMR2", .addr = A_AFMR2, + .pre_write = can_filter_mask_pre_write, + },{ .name = "AFIR2", .addr = A_AFIR2, + .pre_write = can_filter_id_pre_write, + },{ .name = "AFMR3", .addr = A_AFMR3, + .pre_write = can_filter_mask_pre_write, + },{ .name = "AFIR3", .addr = A_AFIR3, + .pre_write = can_filter_id_pre_write, + },{ .name = "AFMR4", .addr = A_AFMR4, + .pre_write = can_filter_mask_pre_write, + },{ .name = "AFIR4", .addr = A_AFIR4, + .pre_write = can_filter_id_pre_write, + } +}; + +static void xlnx_zynqmp_can_ptimer_cb(void *opaque) +{ + /* No action required on the timer rollover. */ +} + +static const MemoryRegionOps can_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void xlnx_zynqmp_can_reset_init(Object *obj, ResetType type) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj); + unsigned int i; + + for (i = R_RXFIFO_ID; i < ARRAY_SIZE(s->reg_info); ++i) { + register_reset(&s->reg_info[i]); + } + + ptimer_transaction_begin(s->can_timer); + ptimer_set_count(s->can_timer, 0); + ptimer_transaction_commit(s->can_timer); +} + +static void xlnx_zynqmp_can_reset_hold(Object *obj) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj); + unsigned int i; + + for (i = 0; i < R_RXFIFO_ID; ++i) { + register_reset(&s->reg_info[i]); + } + + /* + * Reset FIFOs when CAN model is reset. This will clear the fifo writes + * done by post_write which gets called from register_reset function, + * post_write handle will not be able to trigger tx because CAN will be + * disabled when software_reset_register is cleared first. + */ + fifo32_reset(&s->rx_fifo); + fifo32_reset(&s->tx_fifo); + fifo32_reset(&s->txhpb_fifo); +} + +static bool xlnx_zynqmp_can_can_receive(CanBusClientState *client) +{ + XlnxZynqMPCANState *s = container_of(client, XlnxZynqMPCANState, + bus_client); + + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Controller is in reset state.\n", + path); + return false; + } + + if ((ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) == 0) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Controller is disabled. Incoming" + " messages will be discarded.\n", path); + return false; + } + + return true; +} + +static ssize_t xlnx_zynqmp_can_receive(CanBusClientState *client, + const qemu_can_frame *buf, size_t buf_size) { + XlnxZynqMPCANState *s = container_of(client, XlnxZynqMPCANState, + bus_client); + const qemu_can_frame *frame = buf; + + if (buf_size <= 0) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + qemu_log_mask(LOG_GUEST_ERROR, "%s: Error in the data received.\n", + path); + return 0; + } + + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) { + /* Snoop Mode: Just keep the data. no response back. */ + update_rx_fifo(s, frame); + } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP))) { + /* + * XlnxZynqMPCAN is in sleep mode. Any data on bus will bring it to wake + * up state. + */ + can_exit_sleep_mode(s); + update_rx_fifo(s, frame); + } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) == 0) { + update_rx_fifo(s, frame); + } else { + /* + * XlnxZynqMPCAN will not participate in normal bus communication + * and will not receive any messages transmitted by other CAN nodes. + */ + trace_xlnx_can_rx_discard(s->regs[R_STATUS_REGISTER]); + } + + return 1; +} + +static CanBusClientInfo can_xilinx_bus_client_info = { + .can_receive = xlnx_zynqmp_can_can_receive, + .receive = xlnx_zynqmp_can_receive, +}; + +static int xlnx_zynqmp_can_connect_to_bus(XlnxZynqMPCANState *s, + CanBusState *bus) +{ + s->bus_client.info = &can_xilinx_bus_client_info; + + if (can_bus_insert_client(bus, &s->bus_client) < 0) { + return -1; + } + return 0; +} + +static void xlnx_zynqmp_can_realize(DeviceState *dev, Error **errp) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(dev); + + if (s->canbus) { + if (xlnx_zynqmp_can_connect_to_bus(s, s->canbus) < 0) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); + + error_setg(errp, "%s: xlnx_zynqmp_can_connect_to_bus" + " failed.", path); + return; + } + } + + /* Create RX FIFO, TXFIFO, TXHPB storage. */ + fifo32_create(&s->rx_fifo, RXFIFO_SIZE); + fifo32_create(&s->tx_fifo, RXFIFO_SIZE); + fifo32_create(&s->txhpb_fifo, CAN_FRAME_SIZE); + + /* Allocate a new timer. */ + s->can_timer = ptimer_init(xlnx_zynqmp_can_ptimer_cb, s, + PTIMER_POLICY_DEFAULT); + + ptimer_transaction_begin(s->can_timer); + + ptimer_set_freq(s->can_timer, s->cfg.ext_clk_freq); + ptimer_set_limit(s->can_timer, CAN_TIMER_MAX, 1); + ptimer_run(s->can_timer, 0); + ptimer_transaction_commit(s->can_timer); +} + +static void xlnx_zynqmp_can_init(Object *obj) +{ + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + RegisterInfoArray *reg_array; + + memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_CAN, + XLNX_ZYNQMP_CAN_R_MAX * 4); + reg_array = register_init_block32(DEVICE(obj), can_regs_info, + ARRAY_SIZE(can_regs_info), + s->reg_info, s->regs, + &can_ops, + XLNX_ZYNQMP_CAN_ERR_DEBUG, + XLNX_ZYNQMP_CAN_R_MAX * 4); + + memory_region_add_subregion(&s->iomem, 0x00, &reg_array->mem); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); +} + +static const VMStateDescription vmstate_can = { + .name = TYPE_XLNX_ZYNQMP_CAN, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_FIFO32(rx_fifo, XlnxZynqMPCANState), + VMSTATE_FIFO32(tx_fifo, XlnxZynqMPCANState), + VMSTATE_FIFO32(txhpb_fifo, XlnxZynqMPCANState), + VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPCANState, XLNX_ZYNQMP_CAN_R_MAX), + VMSTATE_PTIMER(can_timer, XlnxZynqMPCANState), + VMSTATE_END_OF_LIST(), + } +}; + +static Property xlnx_zynqmp_can_properties[] = { + DEFINE_PROP_UINT32("ext_clk_freq", XlnxZynqMPCANState, cfg.ext_clk_freq, + CAN_DEFAULT_CLOCK), + DEFINE_PROP_LINK("canbus", XlnxZynqMPCANState, canbus, TYPE_CAN_BUS, + CanBusState *), + DEFINE_PROP_END_OF_LIST(), +}; + +static void xlnx_zynqmp_can_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = xlnx_zynqmp_can_reset_init; + rc->phases.hold = xlnx_zynqmp_can_reset_hold; + dc->realize = xlnx_zynqmp_can_realize; + device_class_set_props(dc, xlnx_zynqmp_can_properties); + dc->vmsd = &vmstate_can; +} + +static const TypeInfo can_info = { + .name = TYPE_XLNX_ZYNQMP_CAN, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxZynqMPCANState), + .class_init = xlnx_zynqmp_can_class_init, + .instance_init = xlnx_zynqmp_can_init, +}; + +static void can_register_types(void) +{ + type_register_static(&can_info); +} + +type_init(can_register_types) diff --git a/hw/Kconfig b/hw/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/Kconfig +++ b/hw/Kconfig @@ -XXX,XX +XXX,XX @@ config XILINX_AXI config XLNX_ZYNQMP bool select REGISTER + select CAN_BUS diff --git a/hw/net/can/meson.build b/hw/net/can/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/can/meson.build +++ b/hw/net/can/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_pcm3680_pci.c')) softmmu_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_mioe3680_pci.c')) softmmu_ss.add(when: 'CONFIG_CAN_CTUCANFD', if_true: files('ctucan_core.c')) softmmu_ss.add(when: 'CONFIG_CAN_CTUCANFD_PCI', if_true: files('ctucan_pci.c')) +softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP', if_true: files('xlnx-zynqmp-can.c')) diff --git a/hw/net/can/trace-events b/hw/net/can/trace-events new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/can/trace-events @@ -XXX,XX +XXX,XX @@ +# xlnx-zynqmp-can.c +xlnx_can_update_irq(uint32_t isr, uint32_t ier, uint32_t irq) "ISR: 0x%08x IER: 0x%08x IRQ: 0x%08x" +xlnx_can_reset(uint32_t val) "Resetting controller with value = 0x%08x" +xlnx_can_rx_fifo_filter_reject(uint32_t id, uint8_t dlc) "Frame: ID: 0x%08x DLC: 0x%02x" +xlnx_can_filter_id_pre_write(uint8_t filter_num, uint32_t value) "Filter%d ID: 0x%08x" +xlnx_can_filter_mask_pre_write(uint8_t filter_num, uint32_t value) "Filter%d MASK: 0x%08x" +xlnx_can_tx_data(uint32_t id, uint8_t dlc, uint8_t db0, uint8_t db1, uint8_t db2, uint8_t db3, uint8_t db4, uint8_t db5, uint8_t db6, uint8_t db7) "Frame: ID: 0x%08x DLC: 0x%02x DATA: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x" +xlnx_can_rx_data(uint32_t id, uint32_t dlc, uint8_t db0, uint8_t db1, uint8_t db2, uint8_t db3, uint8_t db4, uint8_t db5, uint8_t db6, uint8_t db7) "Frame: ID: 0x%08x DLC: 0x%02x DATA: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x" +xlnx_can_rx_discard(uint32_t status) "Controller is not enabled for bus communication. Status Register: 0x%08x" -- 2.20.1 From: Vikram Garhwal <fnu.vikram@xilinx.com> Connect CAN0 and CAN1 on the ZynqMP. Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-id: 1605728926-352690-3-git-send-email-fnu.vikram@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 8 ++++++++ hw/arm/xlnx-zcu102.c | 20 ++++++++++++++++++++ hw/arm/xlnx-zynqmp.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 62 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/arm_gic.h" #include "hw/net/cadence_gem.h" #include "hw/char/cadence_uart.h" +#include "hw/net/xlnx-zynqmp-can.h" #include "hw/ide/ahci.h" #include "hw/sd/sdhci.h" #include "hw/ssi/xilinx_spips.h" @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/cluster.h" #include "target/arm/cpu.h" #include "qom/object.h" +#include "net/can_emu.h" #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp" OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) #define XLNX_ZYNQMP_NUM_RPU_CPUS 2 #define XLNX_ZYNQMP_NUM_GEMS 4 #define XLNX_ZYNQMP_NUM_UARTS 2 +#define XLNX_ZYNQMP_NUM_CAN 2 +#define XLNX_ZYNQMP_CAN_REF_CLK (24 * 1000 * 1000) #define XLNX_ZYNQMP_NUM_SDHCI 2 #define XLNX_ZYNQMP_NUM_SPIS 2 #define XLNX_ZYNQMP_NUM_GDMA_CH 8 @@ -XXX,XX +XXX,XX @@ struct XlnxZynqMPState { CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS]; CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS]; + XlnxZynqMPCANState can[XLNX_ZYNQMP_NUM_CAN]; SysbusAHCIState sata; SDHCIState sdhci[XLNX_ZYNQMP_NUM_SDHCI]; XilinxSPIPS spi[XLNX_ZYNQMP_NUM_SPIS]; @@ -XXX,XX +XXX,XX @@ struct XlnxZynqMPState { bool virt; /* Has the RPU subsystem? */ bool has_rpu; + + /* CAN bus. */ + CanBusState *canbus[XLNX_ZYNQMP_NUM_CAN]; }; #endif diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "sysemu/device_tree.h" #include "qom/object.h" +#include "net/can_emu.h" struct XlnxZCU102 { MachineState parent_obj; @@ -XXX,XX +XXX,XX @@ struct XlnxZCU102 { bool secure; bool virt; + CanBusState *canbus[XLNX_ZYNQMP_NUM_CAN]; + struct arm_boot_info binfo; }; @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_init(MachineState *machine) object_property_set_bool(OBJECT(&s->soc), "virtualization", s->virt, &error_fatal); + for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) { + gchar *bus_name = g_strdup_printf("canbus%d", i); + + object_property_set_link(OBJECT(&s->soc), bus_name, + OBJECT(s->canbus[i]), &error_fatal); + g_free(bus_name); + } + qdev_realize(DEVICE(&s->soc), NULL, &error_fatal); /* Create and plug in the SD cards */ @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; + object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + (Object **)&s->canbus[0], + object_property_allow_set_link, + 0); + + object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + (Object **)&s->canbus[1], + object_property_allow_set_link, + 0); } static void xlnx_zcu102_machine_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ static const int uart_intr[XLNX_ZYNQMP_NUM_UARTS] = { 21, 22, }; +static const uint64_t can_addr[XLNX_ZYNQMP_NUM_CAN] = { + 0xFF060000, 0xFF070000, +}; + +static const int can_intr[XLNX_ZYNQMP_NUM_CAN] = { + 23, 24, +}; + static const uint64_t sdhci_addr[XLNX_ZYNQMP_NUM_SDHCI] = { 0xFF160000, 0xFF170000, }; @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(Object *obj) TYPE_CADENCE_UART); } + for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) { + object_initialize_child(obj, "can[*]", &s->can[i], + TYPE_XLNX_ZYNQMP_CAN); + } + object_initialize_child(obj, "sata", &s->sata, TYPE_SYSBUS_AHCI); for (i = 0; i < XLNX_ZYNQMP_NUM_SDHCI; i++) { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) gic_spi[uart_intr[i]]); } + for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) { + object_property_set_int(OBJECT(&s->can[i]), "ext_clk_freq", + XLNX_ZYNQMP_CAN_REF_CLK, &error_abort); + + object_property_set_link(OBJECT(&s->can[i]), "canbus", + OBJECT(s->canbus[i]), &error_fatal); + + sysbus_realize(SYS_BUS_DEVICE(&s->can[i]), &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->can[i]), 0, can_addr[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->can[i]), 0, + gic_spi[can_intr[i]]); + } + object_property_set_int(OBJECT(&s->sata), "num-ports", SATA_NUM_PORTS, &error_abort); if (!sysbus_realize(SYS_BUS_DEVICE(&s->sata), errp)) { @@ -XXX,XX +XXX,XX @@ static Property xlnx_zynqmp_props[] = { DEFINE_PROP_BOOL("has_rpu", XlnxZynqMPState, has_rpu, false), DEFINE_PROP_LINK("ddr-ram", XlnxZynqMPState, ddr_ram, TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_LINK("canbus0", XlnxZynqMPState, canbus[0], TYPE_CAN_BUS, + CanBusState *), + DEFINE_PROP_LINK("canbus1", XlnxZynqMPState, canbus[1], TYPE_CAN_BUS, + CanBusState *), DEFINE_PROP_END_OF_LIST() }; -- 2.20.1 From: Vikram Garhwal <fnu.vikram@xilinx.com> The QTests perform five tests on the Xilinx ZynqMP CAN controller: Tests the CAN controller in loopback, sleep and snoop mode. Tests filtering of incoming CAN messages. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-id: 1605728926-352690-4-git-send-email-fnu.vikram@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/xlnx-can-test.c | 360 ++++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 361 insertions(+) create mode 100644 tests/qtest/xlnx-can-test.c diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTests for the Xilinx ZynqMP CAN controller. + * + * Copyright (c) 2020 Xilinx Inc. + * + * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" + +/* Base address. */ +#define CAN0_BASE_ADDR 0xFF060000 +#define CAN1_BASE_ADDR 0xFF070000 + +/* Register addresses. */ +#define R_SRR_OFFSET 0x00 +#define R_MSR_OFFSET 0x04 +#define R_SR_OFFSET 0x18 +#define R_ISR_OFFSET 0x1C +#define R_ICR_OFFSET 0x24 +#define R_TXID_OFFSET 0x30 +#define R_TXDLC_OFFSET 0x34 +#define R_TXDATA1_OFFSET 0x38 +#define R_TXDATA2_OFFSET 0x3C +#define R_RXID_OFFSET 0x50 +#define R_RXDLC_OFFSET 0x54 +#define R_RXDATA1_OFFSET 0x58 +#define R_RXDATA2_OFFSET 0x5C +#define R_AFR 0x60 +#define R_AFMR1 0x64 +#define R_AFIR1 0x68 +#define R_AFMR2 0x6C +#define R_AFIR2 0x70 +#define R_AFMR3 0x74 +#define R_AFIR3 0x78 +#define R_AFMR4 0x7C +#define R_AFIR4 0x80 + +/* CAN modes. */ +#define CONFIG_MODE 0x00 +#define NORMAL_MODE 0x00 +#define LOOPBACK_MODE 0x02 +#define SNOOP_MODE 0x04 +#define SLEEP_MODE 0x01 +#define ENABLE_CAN (1 << 1) +#define STATUS_NORMAL_MODE (1 << 3) +#define STATUS_LOOPBACK_MODE (1 << 1) +#define STATUS_SNOOP_MODE (1 << 12) +#define STATUS_SLEEP_MODE (1 << 2) +#define ISR_TXOK (1 << 1) +#define ISR_RXOK (1 << 4) + +static void match_rx_tx_data(const uint32_t *buf_tx, const uint32_t *buf_rx, + uint8_t can_timestamp) +{ + uint16_t size = 0; + uint8_t len = 4; + + while (size < len) { + if (R_RXID_OFFSET + 4 * size == R_RXDLC_OFFSET) { + g_assert_cmpint(buf_rx[size], ==, buf_tx[size] + can_timestamp); + } else { + g_assert_cmpint(buf_rx[size], ==, buf_tx[size]); + } + + size++; + } +} + +static void read_data(QTestState *qts, uint64_t can_base_addr, uint32_t *buf_rx) +{ + uint32_t int_status; + + /* Read the interrupt on CAN rx. */ + int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_RXOK; + + g_assert_cmpint(int_status, ==, ISR_RXOK); + + /* Read the RX register data for CAN. */ + buf_rx[0] = qtest_readl(qts, can_base_addr + R_RXID_OFFSET); + buf_rx[1] = qtest_readl(qts, can_base_addr + R_RXDLC_OFFSET); + buf_rx[2] = qtest_readl(qts, can_base_addr + R_RXDATA1_OFFSET); + buf_rx[3] = qtest_readl(qts, can_base_addr + R_RXDATA2_OFFSET); + + /* Clear the RX interrupt. */ + qtest_writel(qts, CAN1_BASE_ADDR + R_ICR_OFFSET, ISR_RXOK); +} + +static void send_data(QTestState *qts, uint64_t can_base_addr, + const uint32_t *buf_tx) +{ + uint32_t int_status; + + /* Write the TX register data for CAN. */ + qtest_writel(qts, can_base_addr + R_TXID_OFFSET, buf_tx[0]); + qtest_writel(qts, can_base_addr + R_TXDLC_OFFSET, buf_tx[1]); + qtest_writel(qts, can_base_addr + R_TXDATA1_OFFSET, buf_tx[2]); + qtest_writel(qts, can_base_addr + R_TXDATA2_OFFSET, buf_tx[3]); + + /* Read the interrupt on CAN for tx. */ + int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_TXOK; + + g_assert_cmpint(int_status, ==, ISR_TXOK); + + /* Clear the interrupt for tx. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_ICR_OFFSET, ISR_TXOK); +} + +/* + * This test will be transferring data from CAN0 and CAN1 through canbus. CAN0 + * initiate the data transfer to can-bus, CAN1 receives the data. Test compares + * the data sent from CAN0 with received on CAN1. + */ +static void test_can_bus(void) +{ + const uint32_t buf_tx[4] = { 0xFF, 0x80000000, 0x12345678, 0x87654321 }; + uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 }; + uint32_t status = 0; + uint8_t can_timestamp = 1; + + QTestState *qts = qtest_init("-machine xlnx-zcu102" + " -object can-bus,id=canbus0" + " -machine xlnx-zcu102.canbus0=canbus0" + " -machine xlnx-zcu102.canbus1=canbus0" + ); + + /* Configure the CAN0 and CAN1. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + + /* Check here if CAN0 and CAN1 are in normal mode. */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + send_data(qts, CAN0_BASE_ADDR, buf_tx); + + read_data(qts, CAN1_BASE_ADDR, buf_rx); + match_rx_tx_data(buf_tx, buf_rx, can_timestamp); + + qtest_quit(qts); +} + +/* + * This test is performing loopback mode on CAN0 and CAN1. Data sent from TX of + * each CAN0 and CAN1 are compared with RX register data for respective CAN. + */ +static void test_can_loopback(void) +{ + uint32_t buf_tx[4] = { 0xFF, 0x80000000, 0x12345678, 0x87654321 }; + uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 }; + uint32_t status = 0; + + QTestState *qts = qtest_init("-machine xlnx-zcu102" + " -object can-bus,id=canbus0" + " -machine xlnx-zcu102.canbus0=canbus0" + " -machine xlnx-zcu102.canbus1=canbus0" + ); + + /* Configure the CAN0 in loopback mode. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + + /* Check here if CAN0 is set in loopback mode. */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + + g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE); + + send_data(qts, CAN0_BASE_ADDR, buf_tx); + read_data(qts, CAN0_BASE_ADDR, buf_rx); + match_rx_tx_data(buf_tx, buf_rx, 0); + + /* Configure the CAN1 in loopback mode. */ + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE); + qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE); + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + + /* Check here if CAN1 is set in loopback mode. */ + status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET); + + g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE); + + send_data(qts, CAN1_BASE_ADDR, buf_tx); + read_data(qts, CAN1_BASE_ADDR, buf_rx); + match_rx_tx_data(buf_tx, buf_rx, 0); + + qtest_quit(qts); +} + +/* + * Enable filters for CAN1. This will filter incoming messages with ID. In this + * test message will pass through filter 2. + */ +static void test_can_filter(void) +{ + uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 }; + uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 }; + uint32_t status = 0; + uint8_t can_timestamp = 1; + + QTestState *qts = qtest_init("-machine xlnx-zcu102" + " -object can-bus,id=canbus0" + " -machine xlnx-zcu102.canbus0=canbus0" + " -machine xlnx-zcu102.canbus1=canbus0" + ); + + /* Configure the CAN0 and CAN1. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + + /* Check here if CAN0 and CAN1 are in normal mode. */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + /* Set filter for CAN1 for incoming messages. */ + qtest_writel(qts, CAN1_BASE_ADDR + R_AFR, 0x0); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR1, 0xF7); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR1, 0x121F); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR2, 0x5431); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR2, 0x14); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR3, 0x1234); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR3, 0x5431); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR4, 0xFFF); + qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR4, 0x1234); + + qtest_writel(qts, CAN1_BASE_ADDR + R_AFR, 0xF); + + send_data(qts, CAN0_BASE_ADDR, buf_tx); + + read_data(qts, CAN1_BASE_ADDR, buf_rx); + match_rx_tx_data(buf_tx, buf_rx, can_timestamp); + + qtest_quit(qts); +} + +/* Testing sleep mode on CAN0 while CAN1 is in normal mode. */ +static void test_can_sleepmode(void) +{ + uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 }; + uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 }; + uint32_t status = 0; + uint8_t can_timestamp = 1; + + QTestState *qts = qtest_init("-machine xlnx-zcu102" + " -object can-bus,id=canbus0" + " -machine xlnx-zcu102.canbus0=canbus0" + " -machine xlnx-zcu102.canbus1=canbus0" + ); + + /* Configure the CAN0. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SLEEP_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + + /* Check here if CAN0 is in SLEEP mode and CAN1 in normal mode. */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_SLEEP_MODE); + + status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + send_data(qts, CAN1_BASE_ADDR, buf_tx); + + /* + * Once CAN1 sends data on can-bus. CAN0 should exit sleep mode. + * Check the CAN0 status now. It should exit the sleep mode and receive the + * incoming data. + */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + read_data(qts, CAN0_BASE_ADDR, buf_rx); + + match_rx_tx_data(buf_tx, buf_rx, can_timestamp); + + qtest_quit(qts); +} + +/* Testing Snoop mode on CAN0 while CAN1 is in normal mode. */ +static void test_can_snoopmode(void) +{ + uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 }; + uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 }; + uint32_t status = 0; + uint8_t can_timestamp = 1; + + QTestState *qts = qtest_init("-machine xlnx-zcu102" + " -object can-bus,id=canbus0" + " -machine xlnx-zcu102.canbus0=canbus0" + " -machine xlnx-zcu102.canbus1=canbus0" + ); + + /* Configure the CAN0. */ + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SNOOP_MODE); + qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + + qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN); + qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE); + + /* Check here if CAN0 is in SNOOP mode and CAN1 in normal mode. */ + status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_SNOOP_MODE); + + status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET); + g_assert_cmpint(status, ==, STATUS_NORMAL_MODE); + + send_data(qts, CAN1_BASE_ADDR, buf_tx); + + read_data(qts, CAN0_BASE_ADDR, buf_rx); + + match_rx_tx_data(buf_tx, buf_rx, can_timestamp); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + g_test_init(&argc, &argv, NULL); + + qtest_add_func("/net/can/can_bus", test_can_bus); + qtest_add_func("/net/can/can_loopback", test_can_loopback); + qtest_add_func("/net/can/can_filter", test_can_filter); + qtest_add_func("/net/can/can_test_snoopmode", test_can_snoopmode); + qtest_add_func("/net/can/can_test_sleepmode", test_can_sleepmode); + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_aarch64 = \ ['arm-cpu-features', 'numa-test', 'boot-serial-test', + 'xlnx-can-test', 'migration-test'] qtests_s390x = \ -- 2.20.1 From: Vikram Garhwal <fnu.vikram@xilinx.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-id: 1605728926-352690-5-git-send-email-fnu.vikram@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/net/opencores_eth.c Devices ------- +Xilinx CAN +M: Vikram Garhwal <fnu.vikram@xilinx.com> +M: Francisco Iglesias <francisco.iglesias@xilinx.com> +S: Maintained +F: hw/net/can/xlnx-* +F: include/hw/net/xlnx-* +F: tests/qtest/xlnx-can-test* + EDU M: Jiri Slaby <jslaby@suse.cz> S: Maintained -- 2.20.1 From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Trusted Firmware now supports A72 on sbsa-ref by default [1] so enable it for QEMU as well. A53 was already enabled there. 1. https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7117 Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201120141705.246690-1-marcin.juszkiewicz@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = { [SBSA_GWDT] = 16, }; +static const char * const valid_cpus[] = { + ARM_CPU_TYPE_NAME("cortex-a53"), + ARM_CPU_TYPE_NAME("cortex-a57"), + ARM_CPU_TYPE_NAME("cortex-a72"), +}; + +static bool cpu_type_valid(const char *cpu) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(valid_cpus); i++) { + if (strcmp(cpu, valid_cpus[i]) == 0) { + return true; + } + } + return false; +} + static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx) { uint8_t clustersz = ARM_DEFAULT_CPUS_PER_CLUSTER; @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) const CPUArchIdList *possible_cpus; int n, sbsa_max_cpus; - if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) { - error_report("sbsa-ref: CPU type other than the built-in " - "cortex-a57 not supported"); + if (!cpu_type_valid(machine->cpu_type)) { + error_report("mach-virt: CPU type %s not supported", machine->cpu_type); exit(1); } -- 2.20.1 From: Havard Skinnemoen <hskinnemoen@google.com> Dump the collected random data after a randomness test failure. Note that this relies on the test having called g_test_set_nonfatal_assertions() so we don't abort immediately on the assertion failure. Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: minor commit message tweak] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm7xx_rng-test.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/tests/qtest/npcm7xx_rng-test.c b/tests/qtest/npcm7xx_rng-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_rng-test.c +++ b/tests/qtest/npcm7xx_rng-test.c @@ -XXX,XX +XXX,XX @@ #include "libqtest-single.h" #include "qemu/bitops.h" +#include "qemu-common.h" #define RNG_BASE_ADDR 0xf000b000 @@ -XXX,XX +XXX,XX @@ /* Number of bits to collect for randomness tests. */ #define TEST_INPUT_BITS (128) +static void dump_buf_if_failed(const uint8_t *buf, size_t size) +{ + if (g_test_failed()) { + qemu_hexdump(stderr, "", buf, size); + } +} + static void rng_writeb(unsigned int offset, uint8_t value) { writeb(RNG_BASE_ADDR + offset, value); @@ -XXX,XX +XXX,XX @@ static void test_continuous_monobit(void) } g_assert_cmpfloat(calc_monobit_p(buf, sizeof(buf)), >, 0.01); + dump_buf_if_failed(buf, sizeof(buf)); } /* @@ -XXX,XX +XXX,XX @@ static void test_continuous_runs(void) } g_assert_cmpfloat(calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE), >, 0.01); + dump_buf_if_failed(buf.c, sizeof(buf)); } /* @@ -XXX,XX +XXX,XX @@ static void test_first_byte_monobit(void) } g_assert_cmpfloat(calc_monobit_p(buf, sizeof(buf)), >, 0.01); + dump_buf_if_failed(buf, sizeof(buf)); } /* @@ -XXX,XX +XXX,XX @@ static void test_first_byte_runs(void) } g_assert_cmpfloat(calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE), >, 0.01); + dump_buf_if_failed(buf.c, sizeof(buf)); } int main(int argc, char **argv) -- 2.20.1 From: Alex Chen <alex.chen@huawei.com> We should use printf format specifier "%u" instead of "%d" for argument of type "unsigned int". Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Message-id: 20201126111109.112238-2-alex.chen@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx25_ccm.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/hw/misc/imx25_ccm.c b/hw/misc/imx25_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx25_ccm.c +++ b/hw/misc/imx25_ccm.c @@ -XXX,XX +XXX,XX @@ static const char *imx25_ccm_reg_name(uint32_t reg) case IMX25_CCM_LPIMR1_REG: return "lpimr1"; default: - sprintf(unknown, "[%d ?]", reg); + sprintf(unknown, "[%u ?]", reg); return unknown; } } @@ -XXX,XX +XXX,XX @@ static uint32_t imx25_ccm_get_mpll_clk(IMXCCMState *dev) freq = imx_ccm_calc_pll(s->reg[IMX25_CCM_MPCTL_REG], CKIH_FREQ); } - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx25_ccm_get_mcu_clk(IMXCCMState *dev) freq = freq / (1 + EXTRACT(s->reg[IMX25_CCM_CCTL_REG], ARM_CLK_DIV)); - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx25_ccm_get_ahb_clk(IMXCCMState *dev) freq = imx25_ccm_get_mcu_clk(dev) / (1 + EXTRACT(s->reg[IMX25_CCM_CCTL_REG], AHB_CLK_DIV)); - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx25_ccm_get_ipg_clk(IMXCCMState *dev) freq = imx25_ccm_get_ahb_clk(dev) / 2; - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx25_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) break; } - DPRINTF("Clock = %d) = %d\n", clock, freq); + DPRINTF("Clock = %d) = %u\n", clock, freq); return freq; } -- 2.20.1 From: Alex Chen <alex.chen@huawei.com> We should use printf format specifier "%u" instead of "%d" for argument of type "unsigned int". Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Message-id: 20201126111109.112238-3-alex.chen@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx31_ccm.c | 14 +++++++------- hw/misc/imx_ccm.c | 4 ++-- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/misc/imx31_ccm.c b/hw/misc/imx31_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx31_ccm.c +++ b/hw/misc/imx31_ccm.c @@ -XXX,XX +XXX,XX @@ static const char *imx31_ccm_reg_name(uint32_t reg) case IMX31_CCM_PDR2_REG: return "PDR2"; default: - sprintf(unknown, "[%d ?]", reg); + sprintf(unknown, "[%u ?]", reg); return unknown; } } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_pll_ref_clk(IMXCCMState *dev) freq = CKIH_FREQ; } - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_mpll_clk(IMXCCMState *dev) freq = imx_ccm_calc_pll(s->reg[IMX31_CCM_MPCTL_REG], imx31_ccm_get_pll_ref_clk(dev)); - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_mcu_main_clk(IMXCCMState *dev) freq = imx31_ccm_get_mpll_clk(dev); } - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_hclk_clk(IMXCCMState *dev) freq = imx31_ccm_get_mcu_main_clk(dev) / (1 + EXTRACT(s->reg[IMX31_CCM_PDR0_REG], MAX)); - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_ipg_clk(IMXCCMState *dev) freq = imx31_ccm_get_hclk_clk(dev) / (1 + EXTRACT(s->reg[IMX31_CCM_PDR0_REG], IPG)); - DPRINTF("freq = %d\n", freq); + DPRINTF("freq = %u\n", freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx31_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) break; } - DPRINTF("Clock = %d) = %d\n", clock, freq); + DPRINTF("Clock = %d) = %u\n", clock, freq); return freq; } diff --git a/hw/misc/imx_ccm.c b/hw/misc/imx_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx_ccm.c +++ b/hw/misc/imx_ccm.c @@ -XXX,XX +XXX,XX @@ uint32_t imx_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) freq = klass->get_clock_frequency(dev, clock); } - DPRINTF("(clock = %d) = %d\n", clock, freq); + DPRINTF("(clock = %d) = %u\n", clock, freq); return freq; } @@ -XXX,XX +XXX,XX @@ uint32_t imx_ccm_calc_pll(uint32_t pllreg, uint32_t base_freq) freq = ((2 * (base_freq >> 10) * (mfi * mfd + mfn)) / (mfd * pd)) << 10; - DPRINTF("(pllreg = 0x%08x, base_freq = %d) = %d\n", pllreg, base_freq, + DPRINTF("(pllreg = 0x%08x, base_freq = %u) = %d\n", pllreg, base_freq, freq); return freq; -- 2.20.1 From: Alex Chen <alex.chen@huawei.com> We should use printf format specifier "%u" instead of "%d" for argument of type "unsigned int". Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Message-id: 20201126111109.112238-4-alex.chen@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 20 ++++++++++---------- hw/misc/imx6_src.c | 2 +- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static const char *imx6_ccm_reg_name(uint32_t reg) case CCM_CMEOR: return "CMEOR"; default: - sprintf(unknown, "%d ?", reg); + sprintf(unknown, "%u ?", reg); return unknown; } } @@ -XXX,XX +XXX,XX @@ static const char *imx6_analog_reg_name(uint32_t reg) case USB_ANALOG_DIGPROG: return "USB_ANALOG_DIGPROG"; default: - sprintf(unknown, "%d ?", reg); + sprintf(unknown, "%u ?", reg); return unknown; } } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_analog_get_pll2_clk(IMX6CCMState *dev) freq *= 20; } - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_analog_get_pll2_pfd0_clk(IMX6CCMState *dev) freq = imx6_analog_get_pll2_clk(dev) * 18 / EXTRACT(dev->analog[CCM_ANALOG_PFD_528], PFD0_FRAC); - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_analog_get_pll2_pfd2_clk(IMX6CCMState *dev) freq = imx6_analog_get_pll2_clk(dev) * 18 / EXTRACT(dev->analog[CCM_ANALOG_PFD_528], PFD2_FRAC); - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_analog_get_periph_clk(IMX6CCMState *dev) break; } - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_ccm_get_ahb_clk(IMX6CCMState *dev) freq = imx6_analog_get_periph_clk(dev) / (1 + EXTRACT(dev->ccm[CCM_CBCDR], AHB_PODF)); - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_ccm_get_ipg_clk(IMX6CCMState *dev) freq = imx6_ccm_get_ahb_clk(dev) / (1 + EXTRACT(dev->ccm[CCM_CBCDR], IPG_PODF)); - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint64_t imx6_ccm_get_per_clk(IMX6CCMState *dev) freq = imx6_ccm_get_ipg_clk(dev) / (1 + EXTRACT(dev->ccm[CCM_CSCMR1], PERCLK_PODF)); - DPRINTF("freq = %d\n", (uint32_t)freq); + DPRINTF("freq = %u\n", (uint32_t)freq); return freq; } @@ -XXX,XX +XXX,XX @@ static uint32_t imx6_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) break; } - DPRINTF("Clock = %d) = %d\n", clock, freq); + DPRINTF("Clock = %d) = %u\n", clock, freq); return freq; } diff --git a/hw/misc/imx6_src.c b/hw/misc/imx6_src.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_src.c +++ b/hw/misc/imx6_src.c @@ -XXX,XX +XXX,XX @@ static const char *imx6_src_reg_name(uint32_t reg) case SRC_GPR10: return "SRC_GPR10"; default: - sprintf(unknown, "%d ?", reg); + sprintf(unknown, "%u ?", reg); return unknown; } } -- 2.20.1 From: Alex Chen <alex.chen@huawei.com> We should use printf format specifier "%u" instead of "%d" for argument of type "unsigned int". Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Message-id: 20201126111109.112238-5-alex.chen@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6ul_ccm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/misc/imx6ul_ccm.c b/hw/misc/imx6ul_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6ul_ccm.c +++ b/hw/misc/imx6ul_ccm.c @@ -XXX,XX +XXX,XX @@ static const char *imx6ul_ccm_reg_name(uint32_t reg) case CCM_CMEOR: return "CMEOR"; default: - sprintf(unknown, "%d ?", reg); + sprintf(unknown, "%u ?", reg); return unknown; } } @@ -XXX,XX +XXX,XX @@ static const char *imx6ul_analog_reg_name(uint32_t reg) case USB_ANALOG_DIGPROG: return "USB_ANALOG_DIGPROG"; default: - sprintf(unknown, "%d ?", reg); + sprintf(unknown, "%u ?", reg); return unknown; } } -- 2.20.1 For M-profile CPUs, the range from 0xe0000000 to 0xe00fffff is the Private Peripheral Bus range, which includes all of the memory mapped devices and registers that are part of the CPU itself, including the NVIC, systick timer, and debug and trace components like the Data Watchpoint and Trace unit (DWT). Within this large region, the range 0xe000e000 to 0xe000efff is the System Control Space (NVIC, system registers, systick) and 0xe002e000 to 0exe002efff is its Non-secure alias. The architecture is clear that within the SCS unimplemented registers should be RES0 for privileged accesses and generate BusFault for unprivileged accesses, and we currently implement this. It is less clear about how to handle accesses to unimplemented regions of the wider PPB. Unprivileged accesses should definitely cause BusFaults (R_DQQS), but the behaviour of privileged accesses is not given as a general rule. However, the register definitions of individual registers for components like the DWT all state that they are RES0 if the relevant component is not implemented, so the simplest way to provide that is to provide RAZ/WI for the whole range for privileged accesses. (The v7M Arm ARM does say that reserved registers should be UNK/SBZP.) Expand the container MemoryRegion that the NVIC exposes so that it covers the whole PPB space. This means: * moving the address that the ARMV7M device maps it to down by 0xe000 bytes * moving the off and the offsets within the container of all the subregions forward by 0xe000 bytes * adding a new default MemoryRegion that covers the whole container at a lower priority than anything else and which provides the RAZWI/BusFault behaviour Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-2-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 1 + hw/arm/armv7m.c | 2 +- hw/intc/armv7m_nvic.c | 78 ++++++++++++++++++++++++++++++----- 3 files changed, 69 insertions(+), 12 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { MemoryRegion systickmem; MemoryRegion systick_ns_mem; MemoryRegion container; + MemoryRegion defaultmem; uint32_t num_irq; qemu_irq excpout; diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); - memory_region_add_subregion(&s->container, 0xe000e000, + memory_region_add_subregion(&s->container, 0xe0000000, sysbus_mmio_get_region(sbd, 0)); for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps nvic_systick_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; +/* + * Unassigned portions of the PPB space are RAZ/WI for privileged + * accesses, and fault for non-privileged accesses. + */ +static MemTxResult ppb_default_read(void *opaque, hwaddr addr, + uint64_t *data, unsigned size, + MemTxAttrs attrs) +{ + qemu_log_mask(LOG_UNIMP, "Read of unassigned area of PPB: offset 0x%x\n", + (uint32_t)addr); + if (attrs.user) { + return MEMTX_ERROR; + } + *data = 0; + return MEMTX_OK; +} + +static MemTxResult ppb_default_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size, + MemTxAttrs attrs) +{ + qemu_log_mask(LOG_UNIMP, "Write of unassigned area of PPB: offset 0x%x\n", + (uint32_t)addr); + if (attrs.user) { + return MEMTX_ERROR; + } + return MEMTX_OK; +} + +static const MemoryRegionOps ppb_default_ops = { + .read_with_attrs = ppb_default_read, + .write_with_attrs = ppb_default_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 8, +}; + static int nvic_post_load(void *opaque, int version_id) { NVICState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void nvic_systick_trigger(void *opaque, int n, int level) static void armv7m_nvic_realize(DeviceState *dev, Error **errp) { NVICState *s = NVIC(dev); - int regionlen; /* The armv7m container object will have set our CPU pointer */ if (!s->cpu || !arm_feature(&s->cpu->env, ARM_FEATURE_M)) { @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) M_REG_S)); } - /* The NVIC and System Control Space (SCS) starts at 0xe000e000 + /* + * This device provides a single sysbus memory region which + * represents the whole of the "System PPB" space. This is the + * range from 0xe0000000 to 0xe00fffff and includes the NVIC, + * the System Control Space (system registers), the systick timer, + * and for CPUs with the Security extension an NS banked version + * of all of these. + * + * The default behaviour for unimplemented registers/ranges + * (for instance the Data Watchpoint and Trace unit at 0xe0001000) + * is to RAZ/WI for privileged access and BusFault for non-privileged + * access. + * + * The NVIC and System Control Space (SCS) starts at 0xe000e000 * and looks like this: * 0x004 - ICTR * 0x010 - 0xff - systick @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) * generally code determining which banked register to use should * use attrs.secure; code determining actual behaviour of the system * should use env->v7m.secure. + * + * The container covers the whole PPB space. Within it the priority + * of overlapping regions is: + * - default region (for RAZ/WI and BusFault) : -1 + * - system register regions : 0 + * - systick : 1 + * This is because the systick device is a small block of registers + * in the middle of the other system control registers. */ - regionlen = arm_feature(&s->cpu->env, ARM_FEATURE_V8) ? 0x21000 : 0x1000; - memory_region_init(&s->container, OBJECT(s), "nvic", regionlen); - /* The system register region goes at the bottom of the priority - * stack as it covers the whole page. - */ + memory_region_init(&s->container, OBJECT(s), "nvic", 0x100000); + memory_region_init_io(&s->defaultmem, OBJECT(s), &ppb_default_ops, s, + "nvic-default", 0x100000); + memory_region_add_subregion_overlap(&s->container, 0, &s->defaultmem, -1); memory_region_init_io(&s->sysregmem, OBJECT(s), &nvic_sysreg_ops, s, "nvic_sysregs", 0x1000); - memory_region_add_subregion(&s->container, 0, &s->sysregmem); + memory_region_add_subregion(&s->container, 0xe000, &s->sysregmem); memory_region_init_io(&s->systickmem, OBJECT(s), &nvic_systick_ops, s, "nvic_systick", 0xe0); - memory_region_add_subregion_overlap(&s->container, 0x10, + memory_region_add_subregion_overlap(&s->container, 0xe010, &s->systickmem, 1); if (arm_feature(&s->cpu->env, ARM_FEATURE_V8)) { memory_region_init_io(&s->sysreg_ns_mem, OBJECT(s), &nvic_sysreg_ns_ops, &s->sysregmem, "nvic_sysregs_ns", 0x1000); - memory_region_add_subregion(&s->container, 0x20000, &s->sysreg_ns_mem); + memory_region_add_subregion(&s->container, 0x2e000, &s->sysreg_ns_mem); memory_region_init_io(&s->systick_ns_mem, OBJECT(s), &nvic_sysreg_ns_ops, &s->systickmem, "nvic_systick_ns", 0xe0); - memory_region_add_subregion_overlap(&s->container, 0x20010, + memory_region_add_subregion_overlap(&s->container, 0x2e010, &s->systick_ns_mem, 1); } -- 2.20.1 In v8.1M the PXN architecture extension adds a new PXN bit to the MPU_RLAR registers, which forbids execution of code in the region from a privileged mode. This is another feature which is just in the generic "in v8.1M" set and has no ID register field indicating its presence. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-3-peter.maydell@linaro.org --- target/arm/helper.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, } else { uint32_t ap = extract32(env->pmsav8.rbar[secure][matchregion], 1, 2); uint32_t xn = extract32(env->pmsav8.rbar[secure][matchregion], 0, 1); + bool pxn = false; + + if (arm_feature(env, ARM_FEATURE_V8_1M)) { + pxn = extract32(env->pmsav8.rlar[secure][matchregion], 4, 1); + } if (m_is_system_region(env, address)) { /* System space is always execute never */ @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, } *prot = simple_ap_to_rw_prot(env, mmu_idx, ap); - if (*prot && !xn) { + if (*prot && !xn && !(pxn && !is_user)) { *prot |= PAGE_EXEC; } /* We don't need to look the attribute up in the MAIR0/MAIR1 -- 2.20.1 In arm_cpu_realizefn() we check whether the board code disabled EL3 via the has_el3 CPU object property, which we create if the CPU starts with the ARM_FEATURE_EL3 feature bit. If it is disabled, then we turn off ARM_FEATURE_EL3 and also zero out the relevant fields in the ID_PFR1 and ID_AA64PFR0 registers. This codepath was incorrectly being taken for M-profile CPUs, which do not have an EL3 and don't set ARM_FEATURE_EL3, but which may have the M-profile Security extension and so should have non-zero values in the ID_PFR1.Security field. Restrict the handling of the feature flag to A/R-profile cores. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-4-peter.maydell@linaro.org --- target/arm/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } } - if (!cpu->has_el3) { + if (!arm_feature(env, ARM_FEATURE_M) && !cpu->has_el3) { /* If the has_el3 CPU property is disabled then we need to disable the * feature. */ -- 2.20.1 Implement the v8.1M VSCCLRM insn, which zeros floating point registers if there is an active floating point context. This requires support in write_neon_element32() for the MO_32 element size, so add it. Because we want to use arm_gen_condlabel(), we need to move the definition of that function up in translate.c so it is before the #include of translate-vfp.c.inc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-5-peter.maydell@linaro.org --- target/arm/cpu.h | 9 ++++ target/arm/m-nocp.decode | 8 +++- target/arm/translate.c | 21 +++++---- target/arm/translate-vfp.c.inc | 84 ++++++++++++++++++++++++++++++++++ 4 files changed, 111 insertions(+), 11 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_mprofile(const ARMISARegisters *id) return FIELD_EX32(id->id_pfr1, ID_PFR1, MPROGMOD) != 0; } +static inline bool isar_feature_aa32_m_sec_state(const ARMISARegisters *id) +{ + /* + * Return true if M-profile state handling insns + * (VSCCLRM, CLRM, FPCTX access insns) are implemented + */ + return FIELD_EX32(id->id_pfr1, ID_PFR1, SECURITY) >= 3; +} + static inline bool isar_feature_aa32_fp16_arith(const ARMISARegisters *id) { /* Sadly this is encoded differently for A-profile and M-profile */ diff --git a/target/arm/m-nocp.decode b/target/arm/m-nocp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m-nocp.decode +++ b/target/arm/m-nocp.decode @@ -XXX,XX +XXX,XX @@ # If the coprocessor is not present or disabled then we will generate # the NOCP exception; otherwise we let the insn through to the main decode. +%vd_dp 22:1 12:4 +%vd_sp 12:4 22:1 + &nocp cp { # Special cases which do not take an early NOCP: VLLDM and VLSTM VLLDM_VLSTM 1110 1100 001 l:1 rn:4 0000 1010 0000 0000 - # TODO: VSCCLRM (new in v8.1M) is similar: - #VSCCLRM 1110 1100 1-01 1111 ---- 1011 ---- ---0 + # VSCCLRM (new in v8.1M) is similar: + VSCCLRM 1110 1100 1.01 1111 .... 1011 imm:7 0 vd=%vd_dp size=3 + VSCCLRM 1110 1100 1.01 1111 .... 1010 imm:8 vd=%vd_sp size=2 NOCP 111- 1110 ---- ---- ---- cp:4 ---- ---- &nocp NOCP 111- 110- ---- ---- ---- cp:4 ---- ---- &nocp diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ void arm_translate_init(void) a64_translate_init(); } +/* Generate a label used for skipping this instruction */ +static void arm_gen_condlabel(DisasContext *s) +{ + if (!s->condjmp) { + s->condlabel = gen_new_label(); + s->condjmp = 1; + } +} + /* Flags for the disas_set_da_iss info argument: * lower bits hold the Rt register number, higher bits are flags. */ @@ -XXX,XX +XXX,XX @@ static void write_neon_element64(TCGv_i64 src, int reg, int ele, MemOp memop) long off = neon_element_offset(reg, ele, memop); switch (memop) { + case MO_32: + tcg_gen_st32_i64(src, cpu_env, off); + break; case MO_64: tcg_gen_st_i64(src, cpu_env, off); break; @@ -XXX,XX +XXX,XX @@ static void gen_srs(DisasContext *s, s->base.is_jmp = DISAS_UPDATE_EXIT; } -/* Generate a label used for skipping this instruction */ -static void arm_gen_condlabel(DisasContext *s) -{ - if (!s->condjmp) { - s->condlabel = gen_new_label(); - s->condjmp = 1; - } -} - /* Skip this instruction if the ARM condition is false */ static void arm_skip_unless(DisasContext *s, uint32_t cond) { diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLLDM_VLSTM(DisasContext *s, arg_VLLDM_VLSTM *a) return true; } +static bool trans_VSCCLRM(DisasContext *s, arg_VSCCLRM *a) +{ + int btmreg, topreg; + TCGv_i64 zero; + TCGv_i32 aspen, sfpa; + + if (!dc_isar_feature(aa32_m_sec_state, s)) { + /* Before v8.1M, fall through in decode to NOCP check */ + return false; + } + + /* Explicitly UNDEF because this takes precedence over NOCP */ + if (!arm_dc_feature(s, ARM_FEATURE_M_MAIN) || !s->v8m_secure) { + unallocated_encoding(s); + return true; + } + + if (!dc_isar_feature(aa32_vfp_simd, s)) { + /* NOP if we have neither FP nor MVE */ + return true; + } + + /* + * If FPCCR.ASPEN != 0 && CONTROL_S.SFPA == 0 then there is no + * active floating point context so we must NOP (without doing + * any lazy state preservation or the NOCP check). + */ + aspen = load_cpu_field(v7m.fpccr[M_REG_S]); + sfpa = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_xori_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_andi_i32(sfpa, sfpa, R_V7M_CONTROL_SFPA_MASK); + tcg_gen_or_i32(sfpa, sfpa, aspen); + arm_gen_condlabel(s); + tcg_gen_brcondi_i32(TCG_COND_EQ, sfpa, 0, s->condlabel); + + if (s->fp_excp_el != 0) { + gen_exception_insn(s, s->pc_curr, EXCP_NOCP, + syn_uncategorized(), s->fp_excp_el); + return true; + } + + topreg = a->vd + a->imm - 1; + btmreg = a->vd; + + /* Convert to Sreg numbers if the insn specified in Dregs */ + if (a->size == 3) { + topreg = topreg * 2 + 1; + btmreg *= 2; + } + + if (topreg > 63 || (topreg > 31 && !(topreg & 1))) { + /* UNPREDICTABLE: we choose to undef */ + unallocated_encoding(s); + return true; + } + + /* Silently ignore requests to clear D16-D31 if they don't exist */ + if (topreg > 31 && !dc_isar_feature(aa32_simd_r32, s)) { + topreg = 31; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* Zero the Sregs from btmreg to topreg inclusive. */ + zero = tcg_const_i64(0); + if (btmreg & 1) { + write_neon_element64(zero, btmreg >> 1, 1, MO_32); + btmreg++; + } + for (; btmreg + 1 <= topreg; btmreg += 2) { + write_neon_element64(zero, btmreg >> 1, 0, MO_64); + } + if (btmreg == topreg) { + write_neon_element64(zero, btmreg >> 1, 0, MO_32); + btmreg++; + } + assert(btmreg == topreg + 1); + /* TODO: when MVE is implemented, zero VPR here */ + return true; +} + static bool trans_NOCP(DisasContext *s, arg_nocp *a) { /* -- 2.20.1 In v8.1M the new CLRM instruction allows zeroing an arbitrary set of the general-purpose registers and APSR. Implement this. The encoding is a subset of the LDMIA T2 encoding, using what would be Rn=0b1111 (which UNDEFs for LDMIA). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-6-peter.maydell@linaro.org --- target/arm/t32.decode | 6 +++++- target/arm/translate.c | 38 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+), 1 deletion(-) diff --git a/target/arm/t32.decode b/target/arm/t32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/t32.decode +++ b/target/arm/t32.decode @@ -XXX,XX +XXX,XX @@ UXTAB 1111 1010 0101 .... 1111 .... 10.. .... @rrr_rot STM_t32 1110 1000 10.0 .... ................ @ldstm i=1 b=0 STM_t32 1110 1001 00.0 .... ................ @ldstm i=0 b=1 -LDM_t32 1110 1000 10.1 .... ................ @ldstm i=1 b=0 +{ + # Rn=15 UNDEFs for LDM; M-profile CLRM uses that encoding + CLRM 1110 1000 1001 1111 list:16 + LDM_t32 1110 1000 10.1 .... ................ @ldstm i=1 b=0 +} LDM_t32 1110 1001 00.1 .... ................ @ldstm i=0 b=1 &rfe !extern rn w pu diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDM_t16(DisasContext *s, arg_ldst_block *a) return do_ldm(s, a, 1); } +static bool trans_CLRM(DisasContext *s, arg_CLRM *a) +{ + int i; + TCGv_i32 zero; + + if (!dc_isar_feature(aa32_m_sec_state, s)) { + return false; + } + + if (extract32(a->list, 13, 1)) { + return false; + } + + if (!a->list) { + /* UNPREDICTABLE; we choose to UNDEF */ + return false; + } + + zero = tcg_const_i32(0); + for (i = 0; i < 15; i++) { + if (extract32(a->list, i, 1)) { + /* Clear R[i] */ + tcg_gen_mov_i32(cpu_R[i], zero); + } + } + if (extract32(a->list, 15, 1)) { + /* + * Clear APSR (by calling the MSR helper with the same argument + * as for "MSR APSR_nzcvqg, Rn": mask = 0b1100, SYSM=0) + */ + TCGv_i32 maskreg = tcg_const_i32(0xc << 8); + gen_helper_v7m_msr(cpu_env, maskreg, zero); + tcg_temp_free_i32(maskreg); + } + tcg_temp_free_i32(zero); + return true; +} + /* * Branch, branch with link */ -- 2.20.1 For M-profile before v8.1M, the only valid register for VMSR/VMRS is the FPSCR. We have a comment that states this, but the actual logic to forbid accesses for any other register value is missing, so we would end up with A-profile style behaviour. Add the missing check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-7-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) * Accesses to R15 are UNPREDICTABLE; we choose to undef. * (FPSCR -> r15 is a special case which writes to the PSR flags.) */ - if (a->rt == 15 && (!a->l || a->reg != ARM_VFP_FPSCR)) { + if (a->reg != ARM_VFP_FPSCR) { + return false; + } + if (a->rt == 15 && !a->l) { return false; } } -- 2.20.1 Currently M-profile borrows the A-profile code for VMSR and VMRS (access to the FP system registers), because all it needs to support is the FPSCR. In v8.1M things become significantly more complicated in two ways: * there are several new FP system registers; some have side effects on read, and one (FPCXT_NS) needs to avoid the usual vfp_access_check() and the "only if FPU implemented" check * all sysregs are now accessible both by VMRS/VMSR (which reads/writes a general purpose register) and also by VLDR/VSTR (which reads/writes them directly to memory) Refactor the structure of how we handle VMSR/VMRS to cope with this: * keep the M-profile code entirely separate from the A-profile code * abstract out the "read or write the general purpose register" part of the code into a loadfn or storefn function pointer, so we can reuse it for VLDR/VSTR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-8-peter.maydell@linaro.org --- target/arm/cpu.h | 3 + target/arm/translate-vfp.c.inc | 182 ++++++++++++++++++++++++++++++--- 2 files changed, 171 insertions(+), 14 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_cpu_mode { #define ARM_VFP_FPINST 9 #define ARM_VFP_FPINST2 10 +/* QEMU-internal value meaning "FPSCR, but we care only about NZCV" */ +#define QEMU_VFP_FPSCR_NZCV 0xffff + /* iwMMXt coprocessor control registers. */ #define ARM_IWMMXT_wCID 0 #define ARM_IWMMXT_wCon 1 diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VDUP(DisasContext *s, arg_VDUP *a) return true; } +/* + * M-profile provides two different sets of instructions that can + * access floating point system registers: VMSR/VMRS (which move + * to/from a general purpose register) and VLDR/VSTR sysreg (which + * move directly to/from memory). In some cases there are also side + * effects which must happen after any write to memory (which could + * cause an exception). So we implement the common logic for the + * sysreg access in gen_M_fp_sysreg_write() and gen_M_fp_sysreg_read(), + * which take pointers to callback functions which will perform the + * actual "read/write general purpose register" and "read/write + * memory" operations. + */ + +/* + * Emit code to store the sysreg to its final destination; frees the + * TCG temp 'value' it is passed. + */ +typedef void fp_sysreg_storefn(DisasContext *s, void *opaque, TCGv_i32 value); +/* + * Emit code to load the value to be copied to the sysreg; returns + * a new TCG temporary + */ +typedef TCGv_i32 fp_sysreg_loadfn(DisasContext *s, void *opaque); + +/* Common decode/access checks for fp sysreg read/write */ +typedef enum FPSysRegCheckResult { + FPSysRegCheckFailed, /* caller should return false */ + FPSysRegCheckDone, /* caller should return true */ + FPSysRegCheckContinue, /* caller should continue generating code */ +} FPSysRegCheckResult; + +static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) +{ + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return FPSysRegCheckFailed; + } + + switch (regno) { + case ARM_VFP_FPSCR: + case QEMU_VFP_FPSCR_NZCV: + break; + default: + return FPSysRegCheckFailed; + } + + if (!vfp_access_check(s)) { + return FPSysRegCheckDone; + } + + return FPSysRegCheckContinue; +} + +static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, + + fp_sysreg_loadfn *loadfn, + void *opaque) +{ + /* Do a write to an M-profile floating point system register */ + TCGv_i32 tmp; + + switch (fp_sysreg_checks(s, regno)) { + case FPSysRegCheckFailed: + return false; + case FPSysRegCheckDone: + return true; + case FPSysRegCheckContinue: + break; + } + + switch (regno) { + case ARM_VFP_FPSCR: + tmp = loadfn(s, opaque); + gen_helper_vfp_set_fpscr(cpu_env, tmp); + tcg_temp_free_i32(tmp); + gen_lookup_tb(s); + break; + default: + g_assert_not_reached(); + } + return true; +} + +static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, + fp_sysreg_storefn *storefn, + void *opaque) +{ + /* Do a read from an M-profile floating point system register */ + TCGv_i32 tmp; + + switch (fp_sysreg_checks(s, regno)) { + case FPSysRegCheckFailed: + return false; + case FPSysRegCheckDone: + return true; + case FPSysRegCheckContinue: + break; + } + + switch (regno) { + case ARM_VFP_FPSCR: + tmp = tcg_temp_new_i32(); + gen_helper_vfp_get_fpscr(tmp, cpu_env); + storefn(s, opaque, tmp); + break; + case QEMU_VFP_FPSCR_NZCV: + /* + * Read just NZCV; this is a special case to avoid the + * helper call for the "VMRS to CPSR.NZCV" insn. + */ + tmp = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); + tcg_gen_andi_i32(tmp, tmp, 0xf0000000); + storefn(s, opaque, tmp); + break; + default: + g_assert_not_reached(); + } + return true; +} + +static void fp_sysreg_to_gpr(DisasContext *s, void *opaque, TCGv_i32 value) +{ + arg_VMSR_VMRS *a = opaque; + + if (a->rt == 15) { + /* Set the 4 flag bits in the CPSR */ + gen_set_nzcv(value); + tcg_temp_free_i32(value); + } else { + store_reg(s, a->rt, value); + } +} + +static TCGv_i32 gpr_to_fp_sysreg(DisasContext *s, void *opaque) +{ + arg_VMSR_VMRS *a = opaque; + + return load_reg(s, a->rt); +} + +static bool gen_M_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) +{ + /* + * Accesses to R15 are UNPREDICTABLE; we choose to undef. + * FPSCR -> r15 is a special case which writes to the PSR flags; + * set a->reg to a special value to tell gen_M_fp_sysreg_read() + * we only care about the top 4 bits of FPSCR there. + */ + if (a->rt == 15) { + if (a->l && a->reg == ARM_VFP_FPSCR) { + a->reg = QEMU_VFP_FPSCR_NZCV; + } else { + return false; + } + } + + if (a->l) { + /* VMRS, move FP system register to gp register */ + return gen_M_fp_sysreg_read(s, a->reg, fp_sysreg_to_gpr, a); + } else { + /* VMSR, move gp register to FP system register */ + return gen_M_fp_sysreg_write(s, a->reg, gpr_to_fp_sysreg, a); + } +} + static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) { TCGv_i32 tmp; bool ignore_vfp_enabled = false; - if (!dc_isar_feature(aa32_fpsp_v2, s)) { - return false; + if (arm_dc_feature(s, ARM_FEATURE_M)) { + return gen_M_VMSR_VMRS(s, a); } - if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* - * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. - * Accesses to R15 are UNPREDICTABLE; we choose to undef. - * (FPSCR -> r15 is a special case which writes to the PSR flags.) - */ - if (a->reg != ARM_VFP_FPSCR) { - return false; - } - if (a->rt == 15 && !a->l) { - return false; - } + if (!dc_isar_feature(aa32_fpsp_v2, s)) { + return false; } switch (a->reg) { -- 2.20.1 The constant-expander functions like negate, plus_2, etc, are generally useful; move them up in translate.c so we can use them in the VFP/Neon decoders as well as in the A32/T32/T16 decoders. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-9-peter.maydell@linaro.org --- target/arm/translate.c | 46 +++++++++++++++++++++++------------------- 1 file changed, 25 insertions(+), 21 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_gen_condlabel(DisasContext *s) } } +/* + * Constant expanders for the decoders. + */ + +static int negate(DisasContext *s, int x) +{ + return -x; +} + +static int plus_2(DisasContext *s, int x) +{ + return x + 2; +} + +static int times_2(DisasContext *s, int x) +{ + return x * 2; +} + +static int times_4(DisasContext *s, int x) +{ + return x * 4; +} + /* Flags for the disas_set_da_iss info argument: * lower bits hold the Rt register number, higher bits are flags. */ @@ -XXX,XX +XXX,XX @@ static void arm_skip_unless(DisasContext *s, uint32_t cond) /* - * Constant expanders for the decoders. + * Constant expanders used by T16/T32 decode */ -static int negate(DisasContext *s, int x) -{ - return -x; -} - -static int plus_2(DisasContext *s, int x) -{ - return x + 2; -} - -static int times_2(DisasContext *s, int x) -{ - return x * 2; -} - -static int times_4(DisasContext *s, int x) -{ - return x * 4; -} - /* Return only the rotation part of T32ExpandImm. */ static int t32_expandimm_rot(DisasContext *s, int x) { -- 2.20.1 Implement the new-in-v8.1M VLDR/VSTR variants which directly read or write FP system registers to memory. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-10-peter.maydell@linaro.org --- target/arm/vfp.decode | 14 ++++++ target/arm/translate-vfp.c.inc | 91 ++++++++++++++++++++++++++++++++++ 2 files changed, 105 insertions(+) diff --git a/target/arm/vfp.decode b/target/arm/vfp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp.decode +++ b/target/arm/vfp.decode @@ -XXX,XX +XXX,XX @@ VLDR_VSTR_hp ---- 1101 u:1 .0 l:1 rn:4 .... 1001 imm:8 vd=%vd_sp VLDR_VSTR_sp ---- 1101 u:1 .0 l:1 rn:4 .... 1010 imm:8 vd=%vd_sp VLDR_VSTR_dp ---- 1101 u:1 .0 l:1 rn:4 .... 1011 imm:8 vd=%vd_dp +# M-profile VLDR/VSTR to sysreg +%vldr_sysreg 22:1 13:3 +%imm7_0x4 0:7 !function=times_4 + +&vldr_sysreg rn reg imm a w p +@vldr_sysreg .... ... . a:1 . . . rn:4 ... . ... .. ....... \ + reg=%vldr_sysreg imm=%imm7_0x4 &vldr_sysreg + +# P=0 W=0 is SEE "Related encodings", so split into two patterns +VLDR_sysreg ---- 110 1 . . w:1 1 .... ... 0 111 11 ....... @vldr_sysreg p=1 +VLDR_sysreg ---- 110 0 . . 1 1 .... ... 0 111 11 ....... @vldr_sysreg p=0 w=1 +VSTR_sysreg ---- 110 1 . . w:1 0 .... ... 0 111 11 ....... @vldr_sysreg p=1 +VSTR_sysreg ---- 110 0 . . 1 0 .... ... 0 111 11 ....... @vldr_sysreg p=0 w=1 + # We split the load/store multiple up into two patterns to avoid # overlap with other insns in the "Advanced SIMD load/store and 64-bit move" # grouping: diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) return true; } +static void fp_sysreg_to_memory(DisasContext *s, void *opaque, TCGv_i32 value) +{ + arg_vldr_sysreg *a = opaque; + uint32_t offset = a->imm; + TCGv_i32 addr; + + if (!a->a) { + offset = - offset; + } + + addr = load_reg(s, a->rn); + if (a->p) { + tcg_gen_addi_i32(addr, addr, offset); + } + + if (s->v8m_stackcheck && a->rn == 13 && a->w) { + gen_helper_v8m_stackcheck(cpu_env, addr); + } + + gen_aa32_st_i32(s, value, addr, get_mem_index(s), + MO_UL | MO_ALIGN | s->be_data); + tcg_temp_free_i32(value); + + if (a->w) { + /* writeback */ + if (!a->p) { + tcg_gen_addi_i32(addr, addr, offset); + } + store_reg(s, a->rn, addr); + } else { + tcg_temp_free_i32(addr); + } +} + +static TCGv_i32 memory_to_fp_sysreg(DisasContext *s, void *opaque) +{ + arg_vldr_sysreg *a = opaque; + uint32_t offset = a->imm; + TCGv_i32 addr; + TCGv_i32 value = tcg_temp_new_i32(); + + if (!a->a) { + offset = - offset; + } + + addr = load_reg(s, a->rn); + if (a->p) { + tcg_gen_addi_i32(addr, addr, offset); + } + + if (s->v8m_stackcheck && a->rn == 13 && a->w) { + gen_helper_v8m_stackcheck(cpu_env, addr); + } + + gen_aa32_ld_i32(s, value, addr, get_mem_index(s), + MO_UL | MO_ALIGN | s->be_data); + + if (a->w) { + /* writeback */ + if (!a->p) { + tcg_gen_addi_i32(addr, addr, offset); + } + store_reg(s, a->rn, addr); + } else { + tcg_temp_free_i32(addr); + } + return value; +} + +static bool trans_VLDR_sysreg(DisasContext *s, arg_vldr_sysreg *a) +{ + if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { + return false; + } + if (a->rn == 15) { + return false; + } + return gen_M_fp_sysreg_write(s, a->reg, memory_to_fp_sysreg, a); +} + +static bool trans_VSTR_sysreg(DisasContext *s, arg_vldr_sysreg *a) +{ + if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { + return false; + } + if (a->rn == 15) { + return false; + } + return gen_M_fp_sysreg_read(s, a->reg, fp_sysreg_to_memory, a); +} + static bool trans_VMOV_half(DisasContext *s, arg_VMOV_single *a) { TCGv_i32 tmp; -- 2.20.1 v8.1M defines a new FP system register FPSCR_nzcvqc; this behaves like the existing FPSCR, except that it reads and writes only bits [31:27] of the FPSCR (the N, Z, C, V and QC flag bits). (Unlike the FPSCR, the special case for Rt=15 of writing the CPSR.NZCV is not permitted.) Implement the register. Since we don't yet implement MVE, we handle the QC bit as RES0, with todo comments for where we will need to add support later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-11-peter.maydell@linaro.org --- target/arm/cpu.h | 13 +++++++++++++ target/arm/translate-vfp.c.inc | 27 +++++++++++++++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val); #define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ #define FPCR_DN (1 << 25) /* Default NaN enable bit */ #define FPCR_QC (1 << 27) /* Cumulative saturation bit */ +#define FPCR_V (1 << 28) /* FP overflow flag */ +#define FPCR_C (1 << 29) /* FP carry flag */ +#define FPCR_Z (1 << 30) /* FP zero flag */ +#define FPCR_N (1 << 31) /* FP negative flag */ + +#define FPCR_NZCV_MASK (FPCR_N | FPCR_Z | FPCR_C | FPCR_V) +#define FPCR_NZCVQC_MASK (FPCR_NZCV_MASK | FPCR_QC) static inline uint32_t vfp_get_fpsr(CPUARMState *env) { @@ -XXX,XX +XXX,XX @@ enum arm_cpu_mode { #define ARM_VFP_FPEXC 8 #define ARM_VFP_FPINST 9 #define ARM_VFP_FPINST2 10 +/* These ones are M-profile only */ +#define ARM_VFP_FPSCR_NZCVQC 2 +#define ARM_VFP_VPR 12 +#define ARM_VFP_P0 13 +#define ARM_VFP_FPCXT_NS 14 +#define ARM_VFP_FPCXT_S 15 /* QEMU-internal value meaning "FPSCR, but we care only about NZCV" */ #define QEMU_VFP_FPSCR_NZCV 0xffff diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) case ARM_VFP_FPSCR: case QEMU_VFP_FPSCR_NZCV: break; + case ARM_VFP_FPSCR_NZCVQC: + if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { + return false; + } + break; default: return FPSysRegCheckFailed; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(tmp); gen_lookup_tb(s); break; + case ARM_VFP_FPSCR_NZCVQC: + { + TCGv_i32 fpscr; + tmp = loadfn(s, opaque); + /* + * TODO: when we implement MVE, write the QC bit. + * For non-MVE, QC is RES0. + */ + tcg_gen_andi_i32(tmp, tmp, FPCR_NZCV_MASK); + fpscr = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); + tcg_gen_andi_i32(fpscr, fpscr, ~FPCR_NZCV_MASK); + tcg_gen_or_i32(fpscr, fpscr, tmp); + store_cpu_field(fpscr, vfp.xregs[ARM_VFP_FPSCR]); + tcg_temp_free_i32(tmp); + break; + } default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, gen_helper_vfp_get_fpscr(tmp, cpu_env); storefn(s, opaque, tmp); break; + case ARM_VFP_FPSCR_NZCVQC: + /* + * TODO: MVE has a QC bit, which we probably won't store + * in the xregs[] field. For non-MVE, where QC is RES0, + * we can just fall through to the FPSCR_NZCV case. + */ case QEMU_VFP_FPSCR_NZCV: /* * Read just NZCV; this is a special case to avoid the -- 2.20.1 We defined a constant name for the mask of NZCV bits in the FPCR/FPSCR in the previous commit; use it in a couple of places in existing code, where we're masking out everything except NZCV for the "load to Rt=15 sets CPSR.NZCV" special case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-12-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, * helper call for the "VMRS to CPSR.NZCV" insn. */ tmp = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); - tcg_gen_andi_i32(tmp, tmp, 0xf0000000); + tcg_gen_andi_i32(tmp, tmp, FPCR_NZCV_MASK); storefn(s, opaque, tmp); break; default: @@ -XXX,XX +XXX,XX @@ static bool trans_VMSR_VMRS(DisasContext *s, arg_VMSR_VMRS *a) case ARM_VFP_FPSCR: if (a->rt == 15) { tmp = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); - tcg_gen_andi_i32(tmp, tmp, 0xf0000000); + tcg_gen_andi_i32(tmp, tmp, FPCR_NZCV_MASK); } else { tmp = tcg_temp_new_i32(); gen_helper_vfp_get_fpscr(tmp, cpu_env); -- 2.20.1 Factor out the code which handles M-profile lazy FP state preservation from full_vfp_access_check(); accesses to the FPCXT_NS register are a special case which need to do just this part (corresponding in the pseudocode to the PreserveFPState() function), and not the full set of actions matching the pseudocode ExecuteFPCheck() which normal FP instructions need to do. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201119215617.29887-13-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 45 ++++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 18 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static inline long vfp_f16_offset(unsigned reg, bool top) return offs; } +/* + * Generate code for M-profile lazy FP state preservation if needed; + * this corresponds to the pseudocode PreserveFPState() function. + */ +static void gen_preserve_fp_state(DisasContext *s) +{ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount (and cause + * this to be the last insn in the TB). + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + s->base.is_jmp = DISAS_UPDATE_EXIT; + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } +} + /* * Check that VFP access is enabled. If it is, do the necessary * M-profile lazy-FP handling and then return true. @@ -XXX,XX +XXX,XX @@ static bool full_vfp_access_check(DisasContext *s, bool ignore_vfp_enabled) /* Handle M-profile lazy FP state mechanics */ /* Trigger lazy-state preservation if necessary */ - if (s->v7m_lspact) { - /* - * Lazy state saving affects external memory and also the NVIC, - * so we must mark it as an IO operation for icount (and cause - * this to be the last insn in the TB). - */ - if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { - s->base.is_jmp = DISAS_UPDATE_EXIT; - gen_io_start(); - } - gen_helper_v7m_preserve_fp_state(cpu_env); - /* - * If the preserve_fp_state helper doesn't throw an exception - * then it will clear LSPACT; we don't need to repeat this for - * any further FP insns in this TB. - */ - s->v7m_lspact = false; - } + gen_preserve_fp_state(s); /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { -- 2.20.1 Implement the new-in-v8.1M FPCXT_S floating point system register. This is for saving and restoring the secure floating point context, and it reads and writes bits [27:0] from the FPSCR and the CONTROL.SFPA bit in bit [31]. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-14-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 58 ++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) return false; } break; + case ARM_VFP_FPCXT_S: + if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { + return false; + } + if (!s->v8m_secure) { + return false; + } + break; default: return FPSysRegCheckFailed; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(tmp); break; } + case ARM_VFP_FPCXT_S: + { + TCGv_i32 sfpa, control, fpscr; + /* Set FPSCR[27:0] and CONTROL.SFPA from value */ + tmp = loadfn(s, opaque); + sfpa = tcg_temp_new_i32(); + tcg_gen_shri_i32(sfpa, tmp, 31); + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_deposit_i32(control, control, sfpa, + R_V7M_CONTROL_SFPA_SHIFT, 1); + store_cpu_field(control, v7m.control[M_REG_S]); + fpscr = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); + tcg_gen_andi_i32(fpscr, fpscr, FPCR_NZCV_MASK); + tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); + tcg_gen_or_i32(fpscr, fpscr, tmp); + store_cpu_field(fpscr, vfp.xregs[ARM_VFP_FPSCR]); + tcg_temp_free_i32(tmp); + tcg_temp_free_i32(sfpa); + break; + } default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, tcg_gen_andi_i32(tmp, tmp, FPCR_NZCV_MASK); storefn(s, opaque, tmp); break; + case ARM_VFP_FPCXT_S: + { + TCGv_i32 control, sfpa, fpscr; + /* Bits [27:0] from FPSCR, bit [31] from CONTROL.SFPA */ + tmp = tcg_temp_new_i32(); + sfpa = tcg_temp_new_i32(); + gen_helper_vfp_get_fpscr(tmp, cpu_env); + tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(sfpa, control, R_V7M_CONTROL_SFPA_MASK); + tcg_gen_shli_i32(sfpa, sfpa, 31 - R_V7M_CONTROL_SFPA_SHIFT); + tcg_gen_or_i32(tmp, tmp, sfpa); + tcg_temp_free_i32(sfpa); + /* + * Store result before updating FPSCR etc, in case + * it is a memory write which causes an exception. + */ + storefn(s, opaque, tmp); + /* + * Now we must reset FPSCR from FPDSCR_NS, and clear + * CONTROL.SFPA; so we'll end the TB here. + */ + tcg_gen_andi_i32(control, control, ~R_V7M_CONTROL_SFPA_MASK); + store_cpu_field(control, v7m.control[M_REG_S]); + fpscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + gen_lookup_tb(s); + break; + } default: g_assert_not_reached(); } -- 2.20.1 The FPDSCR register has a similar layout to the FPSCR. In v8.1M it gains new fields FZ16 (if half-precision floating point is supported) and LTPSIZE (always reads as 4). Update the reset value and the code that handles writes to this register accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-16-peter.maydell@linaro.org --- target/arm/cpu.h | 5 +++++ hw/intc/armv7m_nvic.c | 9 ++++++++- target/arm/cpu.c | 3 +++ 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val); #define FPCR_IXE (1 << 12) /* Inexact exception trap enable */ #define FPCR_IDE (1 << 15) /* Input Denormal exception trap enable */ #define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */ +#define FPCR_RMODE_MASK (3 << 22) /* Rounding mode */ #define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ #define FPCR_DN (1 << 25) /* Default NaN enable bit */ +#define FPCR_AHP (1 << 26) /* Alternative half-precision */ #define FPCR_QC (1 << 27) /* Cumulative saturation bit */ #define FPCR_V (1 << 28) /* FP overflow flag */ #define FPCR_C (1 << 29) /* FP carry flag */ #define FPCR_Z (1 << 30) /* FP zero flag */ #define FPCR_N (1 << 31) /* FP negative flag */ +#define FPCR_LTPSIZE_SHIFT 16 /* LTPSIZE, M-profile only */ +#define FPCR_LTPSIZE_MASK (7 << FPCR_LTPSIZE_SHIFT) + #define FPCR_NZCV_MASK (FPCR_N | FPCR_Z | FPCR_C | FPCR_V) #define FPCR_NZCVQC_MASK (FPCR_NZCV_MASK | FPCR_QC) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, break; case 0xf3c: /* FPDSCR */ if (cpu_isar_feature(aa32_vfp_simd, cpu)) { - value &= 0x07c00000; + uint32_t mask = FPCR_AHP | FPCR_DN | FPCR_FZ | FPCR_RMODE_MASK; + if (cpu_isar_feature(any_fp16, cpu)) { + mask |= FPCR_FZ16; + } + value &= mask; + if (cpu_isar_feature(aa32_lob, cpu)) { + value |= 4 << FPCR_LTPSIZE_SHIFT; + } cpu->env.v7m.fpdscr[attrs.secure] = value; } break; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) * always reset to 4. */ env->v7m.ltpsize = 4; + /* The LTPSIZE field in FPDSCR is constant and reads as 4. */ + env->v7m.fpdscr[M_REG_NS] = 4 << FPCR_LTPSIZE_SHIFT; + env->v7m.fpdscr[M_REG_S] = 4 << FPCR_LTPSIZE_SHIFT; } if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { -- 2.20.1 In v8.0M, on exception entry the registers R0-R3, R12, APSR and EPSR are zeroed for an exception taken to Non-secure state; for an exception taken to Secure state they become UNKNOWN, and we chose to leave them at their previous values. In v8.1M the behaviour is specified more tightly and these registers are always zeroed regardless of the security state that the exception targets (see rule R_KPZV). Implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-17-peter.maydell@linaro.org --- target/arm/m_helper.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, * Clear registers if necessary to prevent non-secure exception * code being able to see register values from secure code. * Where register values become architecturally UNKNOWN we leave - * them with their previous values. + * them with their previous values. v8.1M is tighter than v8.0M + * here and always zeroes the caller-saved registers regardless + * of the security state the exception is targeting. */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - if (!targets_secure) { + if (!targets_secure || arm_feature(env, ARM_FEATURE_V8_1M)) { /* * Always clear the caller-saved registers (they have been * pushed to the stack earlier in v7m_push_stack()). @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, * v7m_push_callee_stack()). */ int i; + /* + * r4..r11 are callee-saves, zero only if background + * state was Secure (EXCRET.S == 1) and exception + * targets Non-secure state + */ + bool zero_callee_saves = !targets_secure && + (lr & R_V7M_EXCRET_S_MASK); for (i = 0; i < 13; i++) { - /* r4..r11 are callee-saves, zero only if EXCRET.S == 1 */ - if (i < 4 || i > 11 || (lr & R_V7M_EXCRET_S_MASK)) { + if (i < 4 || i > 11 || zero_callee_saves) { env->regs[i] = 0; } } -- 2.20.1 In v8.1M, vector table fetch failures don't set HFSR.FORCED (see rule R_LLRP). (In previous versions of the architecture this was either required or IMPDEF.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-18-peter.maydell@linaro.org --- target/arm/m_helper.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ load_fail: * The HardFault is Secure if BFHFNMINS is 0 (meaning that all HFs are * secure); otherwise it targets the same security state as the * underlying exception. + * In v8.1M HardFaults from vector table fetch fails don't set FORCED. */ if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { exc_secure = true; } - env->v7m.hfsr |= R_V7M_HFSR_VECTTBL_MASK | R_V7M_HFSR_FORCED_MASK; + env->v7m.hfsr |= R_V7M_HFSR_VECTTBL_MASK; + if (!arm_feature(env, ARM_FEATURE_V8_1M)) { + env->v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } armv7m_nvic_set_pending_derived(env->nvic, ARMV7M_EXCP_HARD, exc_secure); return false; } -- 2.20.1 In v8.1M a REVIDR register is defined, which is at address 0xe00ecfc and is a read-only IMPDEF register providing implementation specific minor revision information, like the v8A REVIDR_EL1. Implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-19-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } return val; } + case 0xcfc: + if (!arm_feature(&cpu->env, ARM_FEATURE_V8_1M)) { + goto bad_offset; + } + return cpu->revidr; case 0xd00: /* CPUID Base. */ return cpu->midr; case 0xd04: /* Interrupt Control State (ICSR) */ -- 2.20.1 In v8.1M a new exception return check is added which may cause a NOCP UsageFault (see rule R_XLTP): before we clear s0..s15 and the FPSCR we must check whether access to CP10 from the Security state of the returning exception is disabled; if it is then we must take a fault. (Note that for our implementation CPPWR is always RAZ/WI and so can never cause CP10 accesses to fail.) The other v8.1M change to this register-clearing code is that if MVE is implemented VPR must also be cleared, so add a TODO comment to that effect. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-20-peter.maydell@linaro.org --- target/arm/m_helper.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) v7m_exception_taken(cpu, excret, true, false); return; } else { - /* Clear s0..s15 and FPSCR */ + if (arm_feature(env, ARM_FEATURE_V8_1M)) { + /* v8.1M adds this NOCP check */ + bool nsacr_pass = exc_secure || + extract32(env->v7m.nsacr, 10, 1); + bool cpacr_pass = v7m_cpacr_pass(env, exc_secure, true); + if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " + "stackframe: NSACR prevents clearing FPU registers\n"); + v7m_exception_taken(cpu, excret, true, false); + } else if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + exc_secure); + env->v7m.cfsr[exc_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " + "stackframe: CPACR prevents clearing FPU registers\n"); + v7m_exception_taken(cpu, excret, true, false); + } + } + /* Clear s0..s15 and FPSCR; TODO also VPR when MVE is implemented */ int i; for (i = 0; i < 16; i += 2) { -- 2.20.1 v8.1M adds new encodings of VLLDM and VLSTM (where bit 7 is set). The only difference is that: * the old T1 encodings UNDEF if the implementation implements 32 Dregs (this is currently architecturally impossible for M-profile) * the new T2 encodings have the implementation-defined option to read from memory (discarding the data) or write UNKNOWN values to memory for the stack slots that would be D16-D31 We choose not to make those accesses, so for us the two instructions behave identically assuming they don't UNDEF. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-21-peter.maydell@linaro.org --- target/arm/m-nocp.decode | 2 +- target/arm/translate-vfp.c.inc | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/target/arm/m-nocp.decode b/target/arm/m-nocp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m-nocp.decode +++ b/target/arm/m-nocp.decode @@ -XXX,XX +XXX,XX @@ { # Special cases which do not take an early NOCP: VLLDM and VLSTM - VLLDM_VLSTM 1110 1100 001 l:1 rn:4 0000 1010 0000 0000 + VLLDM_VLSTM 1110 1100 001 l:1 rn:4 0000 1010 op:1 000 0000 # VSCCLRM (new in v8.1M) is similar: VSCCLRM 1110 1100 1.01 1111 .... 1011 imm:7 0 vd=%vd_dp size=3 VSCCLRM 1110 1100 1.01 1111 .... 1010 imm:8 vd=%vd_sp size=2 diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VLLDM_VLSTM(DisasContext *s, arg_VLLDM_VLSTM *a) !arm_dc_feature(s, ARM_FEATURE_V8)) { return false; } + + if (a->op) { + /* + * T2 encoding ({D0-D31} reglist): v8.1M and up. We choose not + * to take the IMPDEF option to make memory accesses to the stack + * slots that correspond to the D16-D31 registers (discarding + * read data and writing UNKNOWN values), so for us the T2 + * encoding behaves identically to the T1 encoding. + */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { + return false; + } + } else { + /* + * T1 encoding ({D0-D15} reglist); undef if we have 32 Dregs. + * This is currently architecturally impossible, but we add the + * check to stay in line with the pseudocode. Note that we must + * emit code for the UNDEF so it takes precedence over the NOCP. + */ + if (dc_isar_feature(aa32_simd_r32, s)) { + unallocated_encoding(s); + return true; + } + } + /* * If not secure, UNDEF. We must emit code for this * rather than returning false so that this takes -- 2.20.1 v8.1M introduces a new TRD flag in the CCR register, which enables checking for stack frame integrity signatures on SG instructions. This bit is not banked, and is always RAZ/WI to Non-secure code. Adjust the code for handling CCR reads and writes to handle this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-23-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ hw/intc/armv7m_nvic.c | 26 ++++++++++++++++++-------- 2 files changed, 20 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CCR, STKOFHFNMIGN, 10, 1) FIELD(V7M_CCR, DC, 16, 1) FIELD(V7M_CCR, IC, 17, 1) FIELD(V7M_CCR, BP, 18, 1) +FIELD(V7M_CCR, LOB, 19, 1) +FIELD(V7M_CCR, TRD, 20, 1) /* V7M SCR bits */ FIELD(V7M_SCR, SLEEPONEXIT, 1, 1) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } return cpu->env.v7m.scr[attrs.secure]; case 0xd14: /* Configuration Control. */ - /* The BFHFNMIGN bit is the only non-banked bit; we - * keep it in the non-secure copy of the register. + /* + * Non-banked bits: BFHFNMIGN (stored in the NS copy of the register) + * and TRD (stored in the S copy of the register) */ val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.scr[attrs.secure] = value; break; case 0xd14: /* Configuration Control. */ + { + uint32_t mask; + if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) { goto bad_offset; } /* Enforce RAZ/WI on reserved and must-RAZ/WI bits */ - value &= (R_V7M_CCR_STKALIGN_MASK | - R_V7M_CCR_BFHFNMIGN_MASK | - R_V7M_CCR_DIV_0_TRP_MASK | - R_V7M_CCR_UNALIGN_TRP_MASK | - R_V7M_CCR_USERSETMPEND_MASK | - R_V7M_CCR_NONBASETHRDENA_MASK); + mask = R_V7M_CCR_STKALIGN_MASK | + R_V7M_CCR_BFHFNMIGN_MASK | + R_V7M_CCR_DIV_0_TRP_MASK | + R_V7M_CCR_UNALIGN_TRP_MASK | + R_V7M_CCR_USERSETMPEND_MASK | + R_V7M_CCR_NONBASETHRDENA_MASK; + if (arm_feature(&cpu->env, ARM_FEATURE_V8_1M) && attrs.secure) { + /* TRD is always RAZ/WI from NS */ + mask |= R_V7M_CCR_TRD_MASK; + } + value &= mask; if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { /* v8M makes NONBASETHRDENA and STKALIGN be RES1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.ccr[attrs.secure] = value; break; + } case 0xd24: /* System Handler Control and State (SHCSR) */ if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { goto bad_offset; -- 2.20.1 v8.1M introduces a new TRD flag in the CCR register, which enables checking for stack frame integrity signatures on SG instructions. Add the code in the SG insn implementation for the new behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-24-peter.maydell@linaro.org --- target/arm/m_helper.c | 86 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, return true; } +static bool v7m_read_sg_stack_word(ARMCPU *cpu, ARMMMUIdx mmu_idx, + uint32_t addr, uint32_t *spdata) +{ + /* + * Read a word of data from the stack for the SG instruction, + * writing the value into *spdata. If the load succeeds, return + * true; otherwise pend an appropriate exception and return false. + * (We can't use data load helpers here that throw an exception + * because of the context we're called in, which is halfway through + * arm_v7m_cpu_do_interrupt().) + */ + CPUState *cs = CPU(cpu); + CPUARMState *env = &cpu->env; + MemTxAttrs attrs = {}; + MemTxResult txres; + target_ulong page_size; + hwaddr physaddr; + int prot; + ARMMMUFaultInfo fi = {}; + ARMCacheAttrs cacheattrs = {}; + uint32_t value; + + if (get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &physaddr, + &attrs, &prot, &page_size, &fi, &cacheattrs)) { + /* MPU/SAU lookup failed */ + if (fi.type == ARMFault_QEMU_SFault) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault during stack word read\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + env->v7m.sfar = addr; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault during stack word read\n"); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_DACCVIOL_MASK | + R_V7M_CFSR_MMARVALID_MASK; + env->v7m.mmfar[M_REG_S] = addr; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM, false); + } + return false; + } + value = address_space_ldl(arm_addressspace(cs, attrs), physaddr, + attrs, &txres); + if (txres != MEMTX_OK) { + /* BusFault trying to read the data */ + qemu_log_mask(CPU_LOG_INT, + "...BusFault during stack word read\n"); + env->v7m.cfsr[M_REG_NS] |= + (R_V7M_CFSR_PRECISERR_MASK | R_V7M_CFSR_BFARVALID_MASK); + env->v7m.bfar = addr; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); + return false; + } + + *spdata = value; + return true; +} + static bool v7m_handle_execute_nsc(ARMCPU *cpu) { /* @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) */ qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); + + if (cpu_isar_feature(aa32_m_sec_state, cpu) && + !arm_v7m_is_handler_mode(env)) { + /* + * v8.1M exception stack frame integrity check. Note that we + * must perform the memory access even if CCR_S.TRD is zero + * and we aren't going to check what the data loaded is. + */ + uint32_t spdata, sp; + + /* + * We know we are currently NS, so the S stack pointers must be + * in other_ss_{psp,msp}, not in regs[13]/other_sp. + */ + sp = v7m_using_psp(env) ? env->v7m.other_ss_psp : env->v7m.other_ss_msp; + if (!v7m_read_sg_stack_word(cpu, mmu_idx, sp, &spdata)) { + /* Stack access failed and an exception has been pended */ + return false; + } + + if (env->v7m.ccr[M_REG_S] & R_V7M_CCR_TRD_MASK) { + if (((spdata & ~1) == 0xfefa125a) || + !(env->v7m.control[M_REG_S] & 1)) { + goto gen_invep; + } + } + } + env->regs[14] &= ~1; env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); -- 2.20.1 In commit 077d7449100d824a4 we added code to handle the v8M requirement that returns from NMI or HardFault forcibly deactivate those exceptions regardless of what interrupt the guest is trying to deactivate. Unfortunately this broke the handling of the "illegal exception return because the returning exception number is not active" check for those cases. In the pseudocode this test is done on the exception the guest asks to return from, but because our implementation was doing this in armv7m_nvic_complete_irq() after the new "deactivate NMI/HardFault regardless" code we ended up doing the test on the VecInfo for that exception instead, which usually meant failing to raise the illegal exception return fault. In the case for "configurable exception targeting the opposite security state" we detected the illegal-return case but went ahead and deactivated the VecInfo anyway, which is wrong because that is the VecInfo for the other security state. Rearrange the code so that we first identify the illegal return cases, then see if we really need to deactivate NMI or HardFault instead, and finally do the deactivation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-25-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 59 +++++++++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 27 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; VecInfo *vec = NULL; - int ret; + int ret = 0; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + trace_nvic_complete_irq(irq, secure); + + if (secure && exc_is_banked(irq)) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + + /* + * Identify illegal exception return cases. We can't immediately + * return at this point because we still need to deactivate + * (either this exception or NMI/HardFault) first. + */ + if (!exc_is_banked(irq) && exc_targets_secure(s, irq) != secure) { + /* + * Return from a configurable exception targeting the opposite + * security state from the one we're trying to complete it for. + * Clear vec because it's not really the VecInfo for this + * (irq, secstate) so we mustn't deactivate it. + */ + ret = -1; + vec = NULL; + } else if (!vec->active) { + /* Return from an inactive interrupt */ + ret = -1; + } else { + /* Legal return, we will return the RETTOBASE bit value to the caller */ + ret = nvic_rettobase(s); + } + /* * For negative priorities, v8M will forcibly deactivate the appropriate * NMI or HardFault regardless of what interrupt we're being asked to @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) } if (!vec) { - if (secure && exc_is_banked(irq)) { - vec = &s->sec_vectors[irq]; - } else { - vec = &s->vectors[irq]; - } - } - - trace_nvic_complete_irq(irq, secure); - - if (!vec->active) { - /* Tell the caller this was an illegal exception return */ - return -1; - } - - /* - * If this is a configurable exception and it is currently - * targeting the opposite security state from the one we're trying - * to complete it for, this counts as an illegal exception return. - * We still need to deactivate whatever vector the logic above has - * selected, though, as it might not be the same as the one for the - * requested exception number. - */ - if (!exc_is_banked(irq) && exc_targets_secure(s, irq) != secure) { - ret = -1; - } else { - ret = nvic_rettobase(s); + return ret; } vec->active = 0; -- 2.20.1 For v8.1M the architecture mandates that CPUs must provide at least the "minimal RAS implementation" from the Reliability, Availability and Serviceability extension. This consists of: * an ESB instruction which is a NOP -- since it is in the HINT space we need only add a comment * an RFSR register which will RAZ/WI * a RAZ/WI AIRCR.IESB bit -- the code which handles writes to AIRCR does not allow setting of RES0 bits, so we already treat this as RAZ/WI; add a comment noting that this is deliberate * minimal implementation of the RAS register block at 0xe0005000 -- this will be in a subsequent commit * setting the ID_PFR0.RAS field to 0b0010 -- we will do this when we add the Cortex-M55 CPU model Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-26-peter.maydell@linaro.org --- target/arm/cpu.h | 14 ++++++++++++++ target/arm/t32.decode | 4 ++++ hw/intc/armv7m_nvic.c | 13 +++++++++++++ 3 files changed, 31 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR4, LSM, 20, 4) FIELD(ID_MMFR4, CCIDX, 24, 4) FIELD(ID_MMFR4, EVT, 28, 4) +FIELD(ID_PFR0, STATE0, 0, 4) +FIELD(ID_PFR0, STATE1, 4, 4) +FIELD(ID_PFR0, STATE2, 8, 4) +FIELD(ID_PFR0, STATE3, 12, 4) +FIELD(ID_PFR0, CSV2, 16, 4) +FIELD(ID_PFR0, AMU, 20, 4) +FIELD(ID_PFR0, DIT, 24, 4) +FIELD(ID_PFR0, RAS, 28, 4) + FIELD(ID_PFR1, PROGMOD, 0, 4) FIELD(ID_PFR1, SECURITY, 4, 4) FIELD(ID_PFR1, MPROGMOD, 8, 4) @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_predinv(const ARMISARegisters *id) return FIELD_EX32(id->id_isar6, ID_ISAR6, SPECRES) != 0; } +static inline bool isar_feature_aa32_ras(const ARMISARegisters *id) +{ + return FIELD_EX32(id->id_pfr0, ID_PFR0, RAS) != 0; +} + static inline bool isar_feature_aa32_mprofile(const ARMISARegisters *id) { return FIELD_EX32(id->id_pfr1, ID_PFR1, MPROGMOD) != 0; diff --git a/target/arm/t32.decode b/target/arm/t32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/t32.decode +++ b/target/arm/t32.decode @@ -XXX,XX +XXX,XX @@ CLZ 1111 1010 1011 ---- 1111 .... 1000 .... @rdm # SEV 1111 0011 1010 1111 1000 0000 0000 0100 # SEVL 1111 0011 1010 1111 1000 0000 0000 0101 + # For M-profile minimal-RAS ESB can be a NOP, which is the + # default behaviour since it is in the hint space. + # ESB 1111 0011 1010 1111 1000 0000 0001 0000 + # The canonical nop ends in 0000 0000, but the whole rest # of the space is "reserved hint, behaves as nop". NOP 1111 0011 1010 1111 1000 0000 ---- ---- diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf04: /* RFSR */ + if (!cpu_isar_feature(aa32_ras, cpu)) { + goto bad_offset; + } + /* We provide minimal-RAS only: RFSR is RAZ/WI */ + return 0; case 0xf34: /* FPCCR */ if (!cpu_isar_feature(aa32_vfp_simd, cpu)) { return 0; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, R_V7M_AIRCR_PRIGROUP_SHIFT, R_V7M_AIRCR_PRIGROUP_LENGTH); } + /* AIRCR.IESB is RAZ/WI because we implement only minimal RAS */ if (attrs.secure) { /* These bits are only writable by secure */ cpu->env.v7m.aircr = value & @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf04: /* RFSR */ + if (!cpu_isar_feature(aa32_ras, cpu)) { + goto bad_offset; + } + /* We provide minimal-RAS only: RFSR is RAZ/WI */ + break; case 0xf34: /* FPCCR */ if (cpu_isar_feature(aa32_vfp_simd, cpu)) { /* Not all bits here are banked. */ -- 2.20.1 The RAS feature has a block of memory-mapped registers at offset 0x5000 within the PPB. For a "minimal RAS" implementation we provide no error records and so the only registers that exist in the block are ERRIIDR and ERRDEVID. The "RAZ/WI for privileged, BusFault for nonprivileged" behaviour of the "nvic-default" region is actually valid for minimal-RAS, so the main benefit of providing an explicit implementation of the register block is more accurate LOG_UNIMP messages, and a framework for where we could add a real RAS implementation later if necessary. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-27-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 1 + hw/intc/armv7m_nvic.c | 56 +++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { MemoryRegion sysreg_ns_mem; MemoryRegion systickmem; MemoryRegion systick_ns_mem; + MemoryRegion ras_mem; MemoryRegion container; MemoryRegion defaultmem; diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps nvic_systick_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; + +static MemTxResult ras_read(void *opaque, hwaddr addr, + uint64_t *data, unsigned size, + MemTxAttrs attrs) +{ + if (attrs.user) { + return MEMTX_ERROR; + } + + switch (addr) { + case 0xe10: /* ERRIIDR */ + /* architect field = Arm; product/variant/revision 0 */ + *data = 0x43b; + break; + case 0xfc8: /* ERRDEVID */ + /* Minimal RAS: we implement 0 error record indexes */ + *data = 0; + break; + default: + qemu_log_mask(LOG_UNIMP, "Read RAS register offset 0x%x\n", + (uint32_t)addr); + *data = 0; + break; + } + return MEMTX_OK; +} + +static MemTxResult ras_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size, + MemTxAttrs attrs) +{ + if (attrs.user) { + return MEMTX_ERROR; + } + + switch (addr) { + default: + qemu_log_mask(LOG_UNIMP, "Write to RAS register offset 0x%x\n", + (uint32_t)addr); + break; + } + return MEMTX_OK; +} + +static const MemoryRegionOps ras_ops = { + .read_with_attrs = ras_read, + .write_with_attrs = ras_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + /* * Unassigned portions of the PPB space are RAZ/WI for privileged * accesses, and fault for non-privileged accesses. @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) &s->systick_ns_mem, 1); } + if (cpu_isar_feature(aa32_ras, s->cpu)) { + memory_region_init_io(&s->ras_mem, OBJECT(s), + &ras_ops, s, "nvic_ras", 0x1000); + memory_region_add_subregion(&s->container, 0x5000, &s->ras_mem); + } + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container); } -- 2.20.1 Correct a typo in the name we give the NVIC object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201119215617.29887-28-peter.maydell@linaro.org --- hw/arm/armv7m.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_instance_init(Object *obj) memory_region_init(&s->container, obj, "armv7m-container", UINT64_MAX); - object_initialize_child(obj, "nvnic", &s->nvic, TYPE_NVIC); + object_initialize_child(obj, "nvic", &s->nvic, TYPE_NVIC); object_property_add_alias(obj, "num-irq", OBJECT(&s->nvic), "num-irq"); -- 2.20.1