ARM pullreq; contains some patches that arrived while I was on holiday, plus the series I sent off before going away, which got reviewed while I was away. thanks -- PMM The following changes since commit c077a998eb3fcae2d048e3baeb5bc592d30fddde: Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20170531' into staging (2017-06-01 15:50:40 +0100) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170601 for you to fetch changes up to cdc58be430b0bdeaef282e2e70f8135ae531616d: hw/arm/virt: fdt: generate distance-map when needed (2017-06-01 17:27:07 +0100) ---------------------------------------------------------------- target-arm queue: * virt: numa: provide ACPI distance info when needed * aspeed: fix i2c controller bugs * aspeed: add temperature sensor device * M profile: support MPU * gicv3: fix mishandling of BPR1, VBPR1 * load_uboot_image: don't assume a full header read * libvixl: Correct build failures on NetBSD ---------------------------------------------------------------- Andrew Jones (3): load_uboot_image: don't assume a full header read hw/arm/virt-acpi-build: build SLIT when needed hw/arm/virt: fdt: generate distance-map when needed Cédric Le Goater (6): aspeed/i2c: improve command handling aspeed/i2c: handle LAST command under the RX command aspeed/i2c: introduce a state machine aspeed: add some I2C devices to the Aspeed machines hw/misc: add a TMP42{1,2,3} device model aspeed: add a temp sensor device on I2C bus 3 Kamil Rytarowski (1): libvixl: Correct build failures on NetBSD Michael Davidsaver (4): armv7m: Improve "-d mmu" tracing for PMSAv7 MPU armv7m: Implement M profile default memory map armv7m: Classify faults as MemManage or BusFault arm: add MPU support to M profile CPUs Peter Maydell (12): hw/intc/arm_gicv3_cpuif: Fix reset value for VMCR_EL2.VBPR1 hw/intc/arm_gicv3_cpuif: Don't let BPR be set below its minimum hw/intc/arm_gicv3_cpuif: Fix priority masking for NS BPR1 arm: Use the mmu_idx we're passed in arm_cpu_do_unaligned_access() arm: Add support for M profile CPUs having different MMU index semantics arm: Use different ARMMMUIdx values for M profile arm: Clean up handling of no-MPU PMSA CPUs arm: Don't clear ARM_FEATURE_PMSA for no-mpu configs arm: Don't let no-MPU PMSA cores write to SCTLR.M arm: Remove unnecessary check on cpu->pmsav7_dregion arm: All M profile cores are PMSA arm: Implement HFNMIENA support for M profile MPU Wei Huang (1): target/arm: clear PMUVER field of AA64DFR0 when vPMU=off disas/libvixl/Makefile.objs | 3 + hw/misc/Makefile.objs | 1 + target/arm/cpu.h | 118 ++++++++++-- target/arm/translate.h | 2 +- hw/arm/aspeed.c | 36 ++++ hw/arm/virt-acpi-build.c | 4 + hw/arm/virt.c | 21 +++ hw/core/loader.c | 3 +- hw/i2c/aspeed_i2c.c | 65 ++++++- hw/intc/arm_gicv3_cpuif.c | 50 ++++- hw/intc/armv7m_nvic.c | 104 +++++++++++ hw/misc/tmp421.c | 401 ++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 28 ++- target/arm/helper.c | 338 ++++++++++++++++++++++----------- target/arm/machine.c | 7 +- target/arm/op_helper.c | 3 +- target/arm/translate-a64.c | 18 +- target/arm/translate.c | 14 +- default-configs/arm-softmmu.mak | 1 + 19 files changed, 1060 insertions(+), 157 deletions(-) create mode 100644 hw/misc/tmp421.c From: Kamil Rytarowski <n54@gmx.com> Ensure that C99 macros are defined regardless of the inclusion order of headers in vixl. This is required at least on NetBSD. The vixl/globals.h headers defines __STDC_CONSTANT_MACROS and must be included before other system headers. This file defines unconditionally the following macros, without altering the original sources: - __STDC_CONSTANT_MACROS - __STDC_LIMIT_MACROS - __STDC_FORMAT_MACROS Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170514051820.15985-1-n54@gmx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- disas/libvixl/Makefile.objs | 3 +++ 1 file changed, 3 insertions(+) diff --git a/disas/libvixl/Makefile.objs b/disas/libvixl/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/disas/libvixl/Makefile.objs +++ b/disas/libvixl/Makefile.objs @@ -XXX,XX +XXX,XX @@ libvixl_OBJS = vixl/utils.o \ # The -Wno-sign-compare is needed only for gcc 4.6, which complains about # some signed-unsigned equality comparisons which later gcc versions do not. $(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CFLAGS := -I$(SRC_PATH)/disas/libvixl $(QEMU_CFLAGS) -Wno-sign-compare +# Ensure that C99 macros are defined regardless of the inclusion order of +# headers in vixl. This is required at least on NetBSD. +$(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CFLAGS += -D__STDC_CONSTANT_MACROS -D__STDC_LIMIT_MACROS -D__STDC_FORMAT_MACROS common-obj-$(CONFIG_ARM_A64_DIS) += $(libvixl_OBJS) -- 2.7.4 From: Andrew Jones <drjones@redhat.com> Don't allow load_uboot_image() to proceed when less bytes than header-size was read. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20170524091315.20284-1-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/loader.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ static int load_uboot_image(const char *filename, hwaddr *ep, hwaddr *loadaddr, return -1; size = read(fd, hdr, sizeof(uboot_image_header_t)); - if (size < 0) + if (size < sizeof(uboot_image_header_t)) { goto out; + } bswap_uboot_header(hdr); -- 2.7.4 We were setting the VBPR1 field of VMCR_EL2 to icv_min_vbpr() on reset, but this is not correct. The field should reset to the minimum value of ICV_BPR0_EL1 plus one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493226792-3237-2-git-send-email-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) cs->ich_hcr_el2 = 0; memset(cs->ich_lr_el2, 0, sizeof(cs->ich_lr_el2)); cs->ich_vmcr_el2 = ICH_VMCR_EL2_VFIQEN | - (icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR1_SHIFT) | + ((icv_min_vbpr(cs) + 1) << ICH_VMCR_EL2_VBPR1_SHIFT) | (icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR0_SHIFT); } -- 2.7.4 icc_bpr_write() was not enforcing that writing a value below the minimum for the BPR should behave as if the BPR was set to the minimum value. This doesn't make a difference for the secure BPRs (since we define the minimum for the QEMU implementation as zero) but did mean we were allowing the NS BPR1 to be set to 0 when 1 should be the lowest value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493226792-3237-3-git-send-email-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void icc_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri, { GICv3CPUState *cs = icc_cs_from_env(env); int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1; + uint64_t minval; if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) { icv_bpr_write(env, ri, value); @@ -XXX,XX +XXX,XX @@ static void icc_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri, return; } + minval = (grp == GICV3_G1NS) ? GIC_MIN_BPR_NS : GIC_MIN_BPR; + if (value < minval) { + value = minval; + } + cs->icc_bpr[grp] = value & 7; gicv3_cpuif_update(cs); } -- 2.7.4 When we calculate the mask to use to get the group priority from an interrupt priority, the way that NS BPR1 is handled differs from how BPR0 and S BPR1 work -- a BPR1 value of 1 means the group priority is in bits [7:1], whereas for BPR0 and S BPR1 this is indicated by a 0 BPR value. Subtract 1 from the BPR value before creating the mask if we're using the NS BPR value, for both hardware and virtual interrupts, as the GICv3 pseudocode does, and fix the comments accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493226792-3237-4-git-send-email-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 42 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 4 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static uint32_t icv_gprio_mask(GICv3CPUState *cs, int group) { /* Return a mask word which clears the subpriority bits from * a priority value for a virtual interrupt in the specified group. - * This depends on the VBPR value: + * This depends on the VBPR value. + * If using VBPR0 then: * a BPR of 0 means the group priority bits are [7:1]; * a BPR of 1 means they are [7:2], and so on down to * a BPR of 7 meaning no group priority bits at all. + * If using VBPR1 then: + * a BPR of 0 is impossible (the minimum value is 1) + * a BPR of 1 means the group priority bits are [7:1]; + * a BPR of 2 means they are [7:2], and so on down to + * a BPR of 7 meaning the group priority is [7]. + * * Which BPR to use depends on the group of the interrupt and * the current ICH_VMCR_EL2.VCBPR settings. + * + * This corresponds to the VGroupBits() pseudocode. */ + int bpr; + if (group == GICV3_G1NS && cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR) { group = GICV3_G0; } - return ~0U << (read_vbpr(cs, group) + 1); + bpr = read_vbpr(cs, group); + if (group == GICV3_G1NS) { + assert(bpr > 0); + bpr--; + } + + return ~0U << (bpr + 1); } static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) @@ -XXX,XX +XXX,XX @@ static uint32_t icc_gprio_mask(GICv3CPUState *cs, int group) { /* Return a mask word which clears the subpriority bits from * a priority value for an interrupt in the specified group. - * This depends on the BPR value: + * This depends on the BPR value. For CBPR0 (S or NS): * a BPR of 0 means the group priority bits are [7:1]; * a BPR of 1 means they are [7:2], and so on down to * a BPR of 7 meaning no group priority bits at all. + * For CBPR1 NS: + * a BPR of 0 is impossible (the minimum value is 1) + * a BPR of 1 means the group priority bits are [7:1]; + * a BPR of 2 means they are [7:2], and so on down to + * a BPR of 7 meaning the group priority is [7]. + * * Which BPR to use depends on the group of the interrupt and * the current ICC_CTLR.CBPR settings. + * + * This corresponds to the GroupBits() pseudocode. */ + int bpr; + if ((group == GICV3_G1 && cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR) || (group == GICV3_G1NS && cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) { group = GICV3_G0; } - return ~0U << ((cs->icc_bpr[group] & 7) + 1); + bpr = cs->icc_bpr[group] & 7; + + if (group == GICV3_G1NS) { + assert(bpr > 0); + bpr--; + } + + return ~0U << (bpr + 1); } static bool icc_no_enabled_hppi(GICv3CPUState *cs) -- 2.7.4 From: Wei Huang <wei@redhat.com> The PMUv3 driver of linux kernel (in arch/arm64/kernel/perf_event.c) relies on the PMUVER field of id_aa64dfr0_el1 to decide if PMU support is present or not. This patch clears the PMUVER field under TCG mode when vPMU=off. Without it, PMUv3 will init insider guest VMs even with vPMU=off. This patch also removes a redundant line inside the if-statement. Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1495123889-32301-1-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (!cpu->has_pmu) { - cpu->has_pmu = false; unset_feature(env, ARM_FEATURE_PMU); + cpu->id_aa64dfr0 &= ~0xf00; } if (!arm_feature(env, ARM_FEATURE_EL2)) { -- 2.7.4 When identifying the DFSR format for an alignment fault, use the mmu index that we are passed, rather than calling cpu_mmu_index() to get the mmu index for the current CPU state. This doesn't actually make any difference since the only cases where the current MMU index differs from the index used for the load are the "unprivileged load/store" instructions, and in that case the mmu index may differ but the translation regime is the same (apart from the "use from Hyp mode" case which is UNPREDICTABLE). However it's the more logical thing to do. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-2-git-send-email-peter.maydell@linaro.org --- target/arm/op_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, /* the DFSR for an alignment fault depends on whether we're using * the LPAE long descriptor format, or the short descriptor format */ - if (arm_s1_regime_using_lpae_format(env, cpu_mmu_index(env, false))) { + if (arm_s1_regime_using_lpae_format(env, mmu_idx)) { env->exception.fsr = (1 << 9) | 0x21; } else { env->exception.fsr = 0x1; -- 2.7.4 The M profile CPU's MPU has an awkward corner case which we would like to implement with a different MMU index. We can avoid having to bump the number of MMU modes ARM uses, because some of our existing MMU indexes are only used by non-M-profile CPUs, so we can borrow one. To avoid that getting too confusing, clean up the code to try to keep the two meanings of the index separate. Instead of ARMMMUIdx enum values being identical to core QEMU MMU index values, they are now the core index values with some high bits set. Any particular CPU always uses the same high bits (so eventually A profile cores and M profile cores will use different bits). New functions arm_to_core_mmu_idx() and core_to_arm_mmu_idx() convert between the two. In general core index values are stored in 'int' types, and ARM values are stored in ARMMMUIdx types. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1493122030-32191-3-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 71 ++++++++++++++++----- target/arm/translate.h | 2 +- target/arm/helper.c | 151 ++++++++++++++++++++++++--------------------- target/arm/op_helper.c | 3 +- target/arm/translate-a64.c | 18 ++++-- target/arm/translate.c | 10 +-- 6 files changed, 156 insertions(+), 99 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * for the accesses done as part of a stage 1 page table walk, rather than * having to walk the stage 2 page table over and over.) * + * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code + * are not quite the same -- different CPU types (most notably M profile + * vs A/R profile) would like to use MMU indexes with different semantics, + * but since we don't ever need to use all of those in a single CPU we + * can avoid setting NB_MMU_MODES to more than 8. The lower bits of + * ARMMMUIdx are the core TLB mmu index, and the higher bits are always + * the same for any particular CPU. + * Variables of type ARMMUIdx are always full values, and the core + * index values are in variables of type 'int'. + * * Our enumeration includes at the end some entries which are not "true" * mmu_idx values in that they don't have corresponding TLBs and are only * valid for doing slow path page table walks. @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * of the AT/ATS operations. * The values used are carefully arranged to make mmu_idx => EL lookup easy. */ +#define ARM_MMU_IDX_A 0x10 /* A profile (and M profile, for the moment) */ +#define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */ + +#define ARM_MMU_IDX_TYPE_MASK (~0x7) +#define ARM_MMU_IDX_COREIDX_MASK 0x7 + typedef enum ARMMMUIdx { - ARMMMUIdx_S12NSE0 = 0, - ARMMMUIdx_S12NSE1 = 1, - ARMMMUIdx_S1E2 = 2, - ARMMMUIdx_S1E3 = 3, - ARMMMUIdx_S1SE0 = 4, - ARMMMUIdx_S1SE1 = 5, - ARMMMUIdx_S2NS = 6, + ARMMMUIdx_S12NSE0 = 0 | ARM_MMU_IDX_A, + ARMMMUIdx_S12NSE1 = 1 | ARM_MMU_IDX_A, + ARMMMUIdx_S1E2 = 2 | ARM_MMU_IDX_A, + ARMMMUIdx_S1E3 = 3 | ARM_MMU_IDX_A, + ARMMMUIdx_S1SE0 = 4 | ARM_MMU_IDX_A, + ARMMMUIdx_S1SE1 = 5 | ARM_MMU_IDX_A, + ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A, /* Indexes below here don't have TLBs and are used only for AT system * instructions or for the first stage of an S12 page table walk. */ - ARMMMUIdx_S1NSE0 = 7, - ARMMMUIdx_S1NSE1 = 8, + ARMMMUIdx_S1NSE0 = 0 | ARM_MMU_IDX_NOTLB, + ARMMMUIdx_S1NSE1 = 1 | ARM_MMU_IDX_NOTLB, } ARMMMUIdx; +/* Bit macros for the core-mmu-index values for each index, + * for use when calling tlb_flush_by_mmuidx() and friends. + */ +typedef enum ARMMMUIdxBit { + ARMMMUIdxBit_S12NSE0 = 1 << 0, + ARMMMUIdxBit_S12NSE1 = 1 << 1, + ARMMMUIdxBit_S1E2 = 1 << 2, + ARMMMUIdxBit_S1E3 = 1 << 3, + ARMMMUIdxBit_S1SE0 = 1 << 4, + ARMMMUIdxBit_S1SE1 = 1 << 5, + ARMMMUIdxBit_S2NS = 1 << 6, +} ARMMMUIdxBit; + #define MMU_USER_IDX 0 +static inline int arm_to_core_mmu_idx(ARMMMUIdx mmu_idx) +{ + return mmu_idx & ARM_MMU_IDX_COREIDX_MASK; +} + +static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) +{ + return mmu_idx | ARM_MMU_IDX_A; +} + /* Return the exception level we're running at if this is our mmu_idx */ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) { - assert(mmu_idx < ARMMMUIdx_S2NS); - return mmu_idx & 3; + switch (mmu_idx & ARM_MMU_IDX_TYPE_MASK) { + case ARM_MMU_IDX_A: + return mmu_idx & 3; + default: + g_assert_not_reached(); + } } /* Determine the current mmu_idx to use for normal loads/stores */ @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) int el = arm_current_el(env); if (el < 2 && arm_is_secure_below_el3(env)) { - return ARMMMUIdx_S1SE0 + el; + return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0 + el); } return el; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx) static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *flags) { - ARMMMUIdx mmu_idx = cpu_mmu_index(env, false); + ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); if (is_a64(env)) { *pc = env->pc; *flags = ARM_TBFLAG_AARCH64_STATE_MASK; @@ -XXX,XX +XXX,XX @@ static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, << ARM_TBFLAG_XSCALE_CPAR_SHIFT); } - *flags |= (mmu_idx << ARM_TBFLAG_MMUIDX_SHIFT); + *flags |= (arm_to_core_mmu_idx(mmu_idx) << ARM_TBFLAG_MMUIDX_SHIFT); /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine * states defined in the ARM ARM for software singlestep: diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline int arm_dc_feature(DisasContext *dc, int feature) static inline int get_mem_index(DisasContext *s) { - return s->mmu_idx; + return arm_to_core_mmu_idx(s->mmu_idx); } /* Function used to determine the target exception EL when otherwise not known diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void tlbiall_nsnh_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = ENV_GET_CPU(env); tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } static void tlbiall_nsnh_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiall_nsnh_is_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = ENV_GET_CPU(env); tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } static void tlbiipas2_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiipas2_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 40); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S2NS)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S2NS); } static void tlbiipas2_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiipas2_is_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 40); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S2NS); } static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_S1E2); } static void tlbiall_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbiall_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx_all_cpus_synced(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_S1E2); } static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = ENV_GET_CPU(env); uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S1E2)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S1E2); } static void tlbimva_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbimva_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1E2)); + ARMMMUIdxBit_S1E2); } static const ARMCPRegInfo cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Accesses to VTTBR may change the VMID so we must flush the TLB. */ if (raw_read(env, ri) != value) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); raw_write(env, ri, value); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vmalle1_write(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_is_secure_below_el3(env)) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vmalle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, if (sec) { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle1_write(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_is_secure_below_el3(env)) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { if (arm_feature(env, ARM_FEATURE_EL2)) { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } else { tlb_flush_by_mmuidx(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle2_write(CPUARMState *env, const ARMCPRegInfo *ri, ARMCPU *cpu = arm_env_get_cpu(env); CPUState *cs = CPU(cpu); - tlb_flush_by_mmuidx(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_S1E2); } static void tlbi_aa64_alle3_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle3_write(CPUARMState *env, const ARMCPRegInfo *ri, ARMCPU *cpu = arm_env_get_cpu(env); CPUState *cs = CPU(cpu); - tlb_flush_by_mmuidx(cs, (1 << ARMMMUIdx_S1E3)); + tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_S1E3); } static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, if (sec) { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else if (has_el2) { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0) | - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0 | + ARMMMUIdxBit_S2NS); } else { tlb_flush_by_mmuidx_all_cpus_synced(cs, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle2is_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx_all_cpus_synced(cs, (1 << ARMMMUIdx_S1E2)); + tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_S1E2); } static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, { CPUState *cs = ENV_GET_CPU(env); - tlb_flush_by_mmuidx_all_cpus_synced(cs, (1 << ARMMMUIdx_S1E3)); + tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_S1E3); } static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, if (arm_is_secure_below_el3(env)) { tlb_flush_page_by_mmuidx(cs, pageaddr, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_page_by_mmuidx(cs, pageaddr, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = CPU(cpu); uint64_t pageaddr = sextract64(value << 12, 0, 56); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S1E2)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S1E2); } static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, CPUState *cs = CPU(cpu); uint64_t pageaddr = sextract64(value << 12, 0, 56); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S1E3)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S1E3); } static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, if (sec) { tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1SE1) | - (1 << ARMMMUIdx_S1SE0)); + ARMMMUIdxBit_S1SE1 | + ARMMMUIdxBit_S1SE0); } else { tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S12NSE1) | - (1 << ARMMMUIdx_S12NSE0)); + ARMMMUIdxBit_S12NSE1 | + ARMMMUIdxBit_S12NSE0); } } @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2is_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t pageaddr = sextract64(value << 12, 0, 56); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1E2)); + ARMMMUIdxBit_S1E2); } static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t pageaddr = sextract64(value << 12, 0, 56); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S1E3)); + ARMMMUIdxBit_S1E3); } static void tlbi_aa64_ipas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_ipas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 48); - tlb_flush_page_by_mmuidx(cs, pageaddr, (1 << ARMMMUIdx_S2NS)); + tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_S2NS); } static void tlbi_aa64_ipas2e1is_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_ipas2e1is_write(CPUARMState *env, const ARMCPRegInfo *ri, pageaddr = sextract64(value << 12, 0, 48); tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, - (1 << ARMMMUIdx_S2NS)); + ARMMMUIdxBit_S2NS); } static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static inline TCR *regime_tcr(CPUARMState *env, ARMMMUIdx mmu_idx) return &env->cp15.tcr_el[regime_el(env, mmu_idx)]; } +/* Convert a possible stage1+2 MMU index into the appropriate + * stage 1 MMU index + */ +static inline ARMMMUIdx stage_1_mmu_idx(ARMMMUIdx mmu_idx) +{ + if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { + mmu_idx += (ARMMMUIdx_S1NSE0 - ARMMMUIdx_S12NSE0); + } + return mmu_idx; +} + /* Returns TBI0 value for current regime el */ uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx) { @@ -XXX,XX +XXX,XX @@ uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx) uint32_t el; /* For EL0 and EL1, TBI is controlled by stage 1's TCR, so convert - * a stage 1+2 mmu index into the appropriate stage 1 mmu index. - */ - if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { - mmu_idx += ARMMMUIdx_S1NSE0; - } + * a stage 1+2 mmu index into the appropriate stage 1 mmu index. + */ + mmu_idx = stage_1_mmu_idx(mmu_idx); tcr = regime_tcr(env, mmu_idx); el = regime_el(env, mmu_idx); @@ -XXX,XX +XXX,XX @@ uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx) uint32_t el; /* For EL0 and EL1, TBI is controlled by stage 1's TCR, so convert - * a stage 1+2 mmu index into the appropriate stage 1 mmu index. - */ - if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { - mmu_idx += ARMMMUIdx_S1NSE0; - } + * a stage 1+2 mmu index into the appropriate stage 1 mmu index. + */ + mmu_idx = stage_1_mmu_idx(mmu_idx); tcr = regime_tcr(env, mmu_idx); el = regime_el(env, mmu_idx); @@ -XXX,XX +XXX,XX @@ static inline bool regime_using_lpae_format(CPUARMState *env, * on whether the long or short descriptor format is in use. */ bool arm_s1_regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx) { - if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { - mmu_idx += ARMMMUIdx_S1NSE0; - } + mmu_idx = stage_1_mmu_idx(mmu_idx); return regime_using_lpae_format(env, mmu_idx); } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, int ret; ret = get_phys_addr(env, address, access_type, - mmu_idx + ARMMMUIdx_S1NSE0, &ipa, attrs, + stage_1_mmu_idx(mmu_idx), &ipa, attrs, prot, page_size, fsr, fi); /* If S1 fails or S2 is disabled, return early. */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, /* * For non-EL2 CPUs a stage1+stage2 translation is just stage 1. */ - mmu_idx += ARMMMUIdx_S1NSE0; + mmu_idx = stage_1_mmu_idx(mmu_idx); } } @@ -XXX,XX +XXX,XX @@ bool arm_tlb_fill(CPUState *cs, vaddr address, int ret; MemTxAttrs attrs = {}; - ret = get_phys_addr(env, address, access_type, mmu_idx, &phys_addr, + ret = get_phys_addr(env, address, access_type, + core_to_arm_mmu_idx(env, mmu_idx), &phys_addr, &attrs, &prot, &page_size, fsr, fi); if (!ret) { /* Map a single [sub]page. */ @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, bool ret; uint32_t fsr; ARMMMUFaultInfo fi = {}; + ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, cpu_mmu_index(env, false), &phys_addr, + ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fsr, &fi); if (ret) { diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, int target_el; bool same_el; uint32_t syn; + ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); if (retaddr) { /* now we have a real cpu fault */ @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, /* the DFSR for an alignment fault depends on whether we're using * the LPAE long descriptor format, or the short descriptor format */ - if (arm_s1_regime_using_lpae_format(env, mmu_idx)) { + if (arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { env->exception.fsr = (1 << 9) | 0x21; } else { env->exception.fsr = 0x1; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void a64_translate_init(void) offsetof(CPUARMState, exclusive_high), "exclusive_high"); } -static inline ARMMMUIdx get_a64_user_mem_index(DisasContext *s) +static inline int get_a64_user_mem_index(DisasContext *s) { - /* Return the mmu_idx to use for A64 "unprivileged load/store" insns: + /* Return the core mmu_idx to use for A64 "unprivileged load/store" insns: * if EL1, access as if EL0; otherwise access at current EL */ + ARMMMUIdx useridx; + switch (s->mmu_idx) { case ARMMMUIdx_S12NSE1: - return ARMMMUIdx_S12NSE0; + useridx = ARMMMUIdx_S12NSE0; + break; case ARMMMUIdx_S1SE1: - return ARMMMUIdx_S1SE0; + useridx = ARMMMUIdx_S1SE0; + break; case ARMMMUIdx_S2NS: g_assert_not_reached(); default: - return s->mmu_idx; + useridx = s->mmu_idx; + break; } + return arm_to_core_mmu_idx(useridx); } void aarch64_cpu_dump_state(CPUState *cs, FILE *f, @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code_a64(ARMCPU *cpu, TranslationBlock *tb) dc->be_data = ARM_TBFLAG_BE_DATA(tb->flags) ? MO_BE : MO_LE; dc->condexec_mask = 0; dc->condexec_cond = 0; - dc->mmu_idx = ARM_TBFLAG_MMUIDX(tb->flags); + dc->mmu_idx = core_to_arm_mmu_idx(env, ARM_TBFLAG_MMUIDX(tb->flags)); dc->tbi0 = ARM_TBFLAG_TBI0(tb->flags); dc->tbi1 = ARM_TBFLAG_TBI1(tb->flags); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_set_da_iss(DisasContext *s, TCGMemOp memop, ISSInfo issinfo) disas_set_insn_syndrome(s, syn); } -static inline ARMMMUIdx get_a32_user_mem_index(DisasContext *s) +static inline int get_a32_user_mem_index(DisasContext *s) { - /* Return the mmu_idx to use for A32/T32 "unprivileged load/store" + /* Return the core mmu_idx to use for A32/T32 "unprivileged load/store" * insns: * if PL2, UNPREDICTABLE (we choose to implement as if PL0) * otherwise, access as if at PL0. @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx get_a32_user_mem_index(DisasContext *s) case ARMMMUIdx_S1E2: /* this one is UNPREDICTABLE */ case ARMMMUIdx_S12NSE0: case ARMMMUIdx_S12NSE1: - return ARMMMUIdx_S12NSE0; + return arm_to_core_mmu_idx(ARMMMUIdx_S12NSE0); case ARMMMUIdx_S1E3: case ARMMMUIdx_S1SE0: case ARMMMUIdx_S1SE1: - return ARMMMUIdx_S1SE0; + return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0); case ARMMMUIdx_S2NS: default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) dc->be_data = ARM_TBFLAG_BE_DATA(tb->flags) ? MO_BE : MO_LE; dc->condexec_mask = (ARM_TBFLAG_CONDEXEC(tb->flags) & 0xf) << 1; dc->condexec_cond = ARM_TBFLAG_CONDEXEC(tb->flags) >> 4; - dc->mmu_idx = ARM_TBFLAG_MMUIDX(tb->flags); + dc->mmu_idx = core_to_arm_mmu_idx(env, ARM_TBFLAG_MMUIDX(tb->flags)); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); #if !defined(CONFIG_USER_ONLY) dc->user = (dc->current_el == 0); -- 2.7.4 Make M profile use completely separate ARMMMUIdx values from those that A profile CPUs use. This is a prelude to adding support for the MPU and for v8M, which together will require 6 MMU indexes which don't map cleanly onto the A profile uses: non secure User non secure Privileged non secure Privileged, execution priority < 0 secure User secure Privileged secure Privileged, execution priority < 0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1493122030-32191-4-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 21 +++++++++++++++++++-- target/arm/helper.c | 5 +++++ target/arm/translate.c | 3 +++ 3 files changed, 27 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * of the AT/ATS operations. * The values used are carefully arranged to make mmu_idx => EL lookup easy. */ -#define ARM_MMU_IDX_A 0x10 /* A profile (and M profile, for the moment) */ +#define ARM_MMU_IDX_A 0x10 /* A profile */ #define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */ +#define ARM_MMU_IDX_M 0x40 /* M profile */ #define ARM_MMU_IDX_TYPE_MASK (~0x7) #define ARM_MMU_IDX_COREIDX_MASK 0x7 @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdx { ARMMMUIdx_S1SE0 = 4 | ARM_MMU_IDX_A, ARMMMUIdx_S1SE1 = 5 | ARM_MMU_IDX_A, ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A, + ARMMMUIdx_MUser = 0 | ARM_MMU_IDX_M, + ARMMMUIdx_MPriv = 1 | ARM_MMU_IDX_M, /* Indexes below here don't have TLBs and are used only for AT system * instructions or for the first stage of an S12 page table walk. */ @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { ARMMMUIdxBit_S1SE0 = 1 << 4, ARMMMUIdxBit_S1SE1 = 1 << 5, ARMMMUIdxBit_S2NS = 1 << 6, + ARMMMUIdxBit_MUser = 1 << 0, + ARMMMUIdxBit_MPriv = 1 << 1, } ARMMMUIdxBit; #define MMU_USER_IDX 0 @@ -XXX,XX +XXX,XX @@ static inline int arm_to_core_mmu_idx(ARMMMUIdx mmu_idx) static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) { - return mmu_idx | ARM_MMU_IDX_A; + if (arm_feature(env, ARM_FEATURE_M)) { + return mmu_idx | ARM_MMU_IDX_M; + } else { + return mmu_idx | ARM_MMU_IDX_A; + } } /* Return the exception level we're running at if this is our mmu_idx */ @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) switch (mmu_idx & ARM_MMU_IDX_TYPE_MASK) { case ARM_MMU_IDX_A: return mmu_idx & 3; + case ARM_MMU_IDX_M: + return mmu_idx & 1; default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) { int el = arm_current_el(env); + if (arm_feature(env, ARM_FEATURE_M)) { + ARMMMUIdx mmu_idx = el == 0 ? ARMMMUIdx_MUser : ARMMMUIdx_MPriv; + + return arm_to_core_mmu_idx(mmu_idx); + } + if (el < 2 && arm_is_secure_below_el3(env)) { return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0 + el); } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t regime_el(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1SE1: case ARMMMUIdx_S1NSE0: case ARMMMUIdx_S1NSE1: + case ARMMMUIdx_MPriv: + case ARMMMUIdx_MUser: return 1; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_secure(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1NSE1: case ARMMMUIdx_S1E2: case ARMMMUIdx_S2NS: + case ARMMMUIdx_MPriv: + case ARMMMUIdx_MUser: return false; case ARMMMUIdx_S1E3: case ARMMMUIdx_S1SE0: @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_user(CPUARMState *env, ARMMMUIdx mmu_idx) switch (mmu_idx) { case ARMMMUIdx_S1SE0: case ARMMMUIdx_S1NSE0: + case ARMMMUIdx_MUser: return true; default: return false; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline int get_a32_user_mem_index(DisasContext *s) case ARMMMUIdx_S1SE0: case ARMMMUIdx_S1SE1: return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0); + case ARMMMUIdx_MUser: + case ARMMMUIdx_MPriv: + return arm_to_core_mmu_idx(ARMMMUIdx_MUser); case ARMMMUIdx_S2NS: default: g_assert_not_reached(); -- 2.7.4 ARM CPUs come in two flavours: * proper MMU ("VMSA") * only an MPU ("PMSA") For PMSA, the MPU may be implemented, or not (in which case there is default "always acts the same" behaviour, but it isn't guest programmable). QEMU is a bit confused about how we indicate this: we have an ARM_FEATURE_MPU, but it's not clear whether this indicates "PMSA, not VMSA" or "PMSA and MPU present" , and sometimes we use it for one purpose and sometimes the other. Currently trying to implement a PMSA-without-MPU core won't work correctly because we turn off the ARM_FEATURE_MPU bit and then a lot of things which should still exist get turned off too. As the first step in cleaning this up, rename the feature bit to ARM_FEATURE_PMSA, which indicates a PMSA CPU (with or without MPU). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-5-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 2 +- target/arm/cpu.c | 12 ++++++------ target/arm/helper.c | 12 ++++++------ target/arm/machine.c | 2 +- 4 files changed, 14 insertions(+), 14 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V6K, ARM_FEATURE_V7, ARM_FEATURE_THUMB2, - ARM_FEATURE_MPU, /* Only has Memory Protection Unit, not full MMU. */ + ARM_FEATURE_PMSA, /* no MMU; may have Memory Protection Unit */ ARM_FEATURE_VFP3, ARM_FEATURE_VFP_FP16, ARM_FEATURE_NEON, diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) &error_abort); } - if (arm_feature(&cpu->env, ARM_FEATURE_MPU)) { + if (arm_feature(&cpu->env, ARM_FEATURE_PMSA)) { qdev_property_add_static(DEVICE(obj), &arm_cpu_has_mpu_property, &error_abort); if (arm_feature(&cpu->env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && - !arm_feature(env, ARM_FEATURE_MPU)) { + !arm_feature(env, ARM_FEATURE_PMSA)) { /* v7VMSA drops support for the old ARMv5 tiny pages, so we * can use 4K pages. */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (!cpu->has_mpu) { - unset_feature(env, ARM_FEATURE_MPU); + unset_feature(env, ARM_FEATURE_PMSA); } - if (arm_feature(env, ARM_FEATURE_MPU) && + if (arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7)) { uint32_t nr = cpu->pmsav7_dregion; @@ -XXX,XX +XXX,XX @@ static void arm946_initfn(Object *obj) cpu->dtb_compatible = "arm,arm946"; set_feature(&cpu->env, ARM_FEATURE_V5); - set_feature(&cpu->env, ARM_FEATURE_MPU); + set_feature(&cpu->env, ARM_FEATURE_PMSA); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); cpu->midr = 0x41059461; cpu->ctr = 0x0f004006; @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_THUMB_DIV); set_feature(&cpu->env, ARM_FEATURE_ARM_DIV); set_feature(&cpu->env, ARM_FEATURE_V7MP); - set_feature(&cpu->env, ARM_FEATURE_MPU); + set_feature(&cpu->env, ARM_FEATURE_PMSA); cpu->midr = 0x411fc153; /* r1p3 */ cpu->id_pfr0 = 0x0131; cpu->id_pfr1 = 0x001; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri, { ARMCPU *cpu = arm_env_get_cpu(env); - if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_MPU) + if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_PMSA) && !extended_addresses_enabled(env)) { /* For VMSA (when not using the LPAE long descriptor page table * format) this register includes the ASID, so do a TLB flush. @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, v6k_cp_reginfo); } if (arm_feature(env, ARM_FEATURE_V7MP) && - !arm_feature(env, ARM_FEATURE_MPU)) { + !arm_feature(env, ARM_FEATURE_PMSA)) { define_arm_cp_regs(cpu, v7mp_cp_reginfo); } if (arm_feature(env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } } - if (arm_feature(env, ARM_FEATURE_MPU)) { + if (arm_feature(env, ARM_FEATURE_PMSA)) { if (arm_feature(env, ARM_FEATURE_V6)) { /* PMSAv6 not implemented */ assert(arm_feature(env, ARM_FEATURE_V7)); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, id_pre_v8_midr_cp_reginfo); } define_arm_cp_regs(cpu, id_cp_reginfo); - if (!arm_feature(env, ARM_FEATURE_MPU)) { + if (!arm_feature(env, ARM_FEATURE_PMSA)) { define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo); } else if (arm_feature(env, ARM_FEATURE_V7)) { define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, /* pmsav7 has special handling for when MPU is disabled so call it before * the common MMU/MPU disabled check below. */ - if (arm_feature(env, ARM_FEATURE_MPU) && + if (arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7)) { *page_size = TARGET_PAGE_SIZE; return get_phys_addr_pmsav7(env, address, access_type, mmu_idx, @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, return 0; } - if (arm_feature(env, ARM_FEATURE_MPU)) { + if (arm_feature(env, ARM_FEATURE_PMSA)) { /* Pre-v7 MPU */ *page_size = TARGET_PAGE_SIZE; return get_phys_addr_pmsav5(env, address, access_type, mmu_idx, diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static bool pmsav7_needed(void *opaque) ARMCPU *cpu = opaque; CPUARMState *env = &cpu->env; - return arm_feature(env, ARM_FEATURE_MPU) && + return arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7); } -- 2.7.4 Fix the handling of QOM properties for PMSA CPUs with no MPU: Allow no-MPU to be specified by either: * has-mpu = false * pmsav7_dregion = 0 and make setting one imply the other. Don't clear the PMSA feature bit in this situation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-6-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) cpu->id_pfr1 &= ~0xf000; } + /* MPU can be configured out of a PMSA CPU either by setting has-mpu + * to false or by setting pmsav7-dregion to 0. + */ if (!cpu->has_mpu) { - unset_feature(env, ARM_FEATURE_PMSA); + cpu->pmsav7_dregion = 0; + } + if (cpu->pmsav7_dregion == 0) { + cpu->has_mpu = false; } if (arm_feature(env, ARM_FEATURE_PMSA) && -- 2.7.4 If the CPU is a PMSA config with no MPU implemented, then the SCTLR.M bit should be RAZ/WI, so that the guest can never turn on the non-existent MPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-7-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, return; } + if (arm_feature(env, ARM_FEATURE_PMSA) && !cpu->has_mpu) { + /* M bit is RAZ/WI for PMSA with no MPU implemented */ + value &= ~SCTLR_M; + } + raw_write(env, ri, value); /* ??? Lots of these bits are not implemented. */ /* This may enable/disable the MMU, so do a TLB flush. */ -- 2.7.4 Now that we enforce both: * pmsav7_dregion == 0 implies has_mpu == false * PMSA with has_mpu == false means SCTLR.M cannot be set we can remove a check on pmsav7_dregion from get_phys_addr_pmsav7(), because we can only reach this code path if the MPU is enabled (and so region_translation_disabled() returned false). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-8-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (n == -1) { /* no hits */ - if (cpu->pmsav7_dregion && - (is_user || !(regime_sctlr(env, mmu_idx) & SCTLR_BR))) { + if (is_user || !(regime_sctlr(env, mmu_idx) & SCTLR_BR)) { /* background fault */ *fsr = 0; return true; -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> Improve the "-d mmu" tracing for the PMSAv7 MPU translation process as an aid in debugging guest MPU configurations: * fix a missing newline for a guest-error log * report the region number with guest-error or unimp logs of bad region register values * add a log message for the overall result of the lookup * print "0x" prefix for hex values Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-9-git-send-email-peter.maydell@linaro.org [PMM: a little tidyup, report region number in all messages rather than just one] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (!rsize) { - qemu_log_mask(LOG_GUEST_ERROR, "DRSR.Rsize field can not be 0"); + qemu_log_mask(LOG_GUEST_ERROR, + "DRSR[%d]: Rsize field cannot be 0\n", n); continue; } rsize++; rmask = (1ull << rsize) - 1; if (base & rmask) { - qemu_log_mask(LOG_GUEST_ERROR, "DRBAR %" PRIx32 " misaligned " - "to DRSR region size, mask = %" PRIx32, - base, rmask); + qemu_log_mask(LOG_GUEST_ERROR, + "DRBAR[%d]: 0x%" PRIx32 " misaligned " + "to DRSR region size, mask = 0x%" PRIx32 "\n", + n, base, rmask); continue; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } } if (rsize < TARGET_PAGE_BITS) { - qemu_log_mask(LOG_UNIMP, "No support for MPU (sub)region" + qemu_log_mask(LOG_UNIMP, + "DRSR[%d]: No support for MPU (sub)region " "alignment of %" PRIu32 " bits. Minimum is %d\n", - rsize, TARGET_PAGE_BITS); + n, rsize, TARGET_PAGE_BITS); continue; } if (srdis) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, break; default: qemu_log_mask(LOG_GUEST_ERROR, - "Bad value for AP bits in DRACR %" - PRIx32 "\n", ap); + "DRACR[%d]: Bad value for AP bits: 0x%" + PRIx32 "\n", n, ap); } } else { /* Priv. mode AP bits decoding */ switch (ap) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, break; default: qemu_log_mask(LOG_GUEST_ERROR, - "Bad value for AP bits in DRACR %" - PRIx32 "\n", ap); + "DRACR[%d]: Bad value for AP bits: 0x%" + PRIx32 "\n", n, ap); } } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr(CPUARMState *env, target_ulong address, */ if (arm_feature(env, ARM_FEATURE_PMSA) && arm_feature(env, ARM_FEATURE_V7)) { + bool ret; *page_size = TARGET_PAGE_SIZE; - return get_phys_addr_pmsav7(env, address, access_type, mmu_idx, - phys_ptr, prot, fsr); + ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx, + phys_ptr, prot, fsr); + qemu_log_mask(CPU_LOG_MMU, "PMSAv7 MPU lookup for %s at 0x%08" PRIx32 + " mmu_idx %u -> %s (prot %c%c%c)\n", + access_type == 1 ? "reading" : + (access_type == 2 ? "writing" : "execute"), + (uint32_t)address, mmu_idx, + ret ? "Miss" : "Hit", + *prot & PAGE_READ ? 'r' : '-', + *prot & PAGE_WRITE ? 'w' : '-', + *prot & PAGE_EXEC ? 'x' : '-'); + + return ret; } if (regime_translation_disabled(env, mmu_idx)) { -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> Add support for the M profile default memory map which is used if the MPU is not present or disabled. The main differences in behaviour from implementing this correctly are that we set the PAGE_EXEC attribute on the right regions of memory, such that device regions are not executable. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Message-id: 1493122030-32191-10-git-send-email-peter.maydell@linaro.org [PMM: rephrased comment and commit message; don't mark the flash memory region as not-writable; list all the cases in the default map explicitly rather than using a 'default' case for the non-executable regions] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 41 ++++++++++++++++++++++++++++++++--------- 1 file changed, 32 insertions(+), 9 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline void get_phys_addr_pmsav7_default(CPUARMState *env, ARMMMUIdx mmu_idx, int32_t address, int *prot) { - *prot = PAGE_READ | PAGE_WRITE; - switch (address) { - case 0xF0000000 ... 0xFFFFFFFF: - if (regime_sctlr(env, mmu_idx) & SCTLR_V) { /* hivecs execing is ok */ + if (!arm_feature(env, ARM_FEATURE_M)) { + *prot = PAGE_READ | PAGE_WRITE; + switch (address) { + case 0xF0000000 ... 0xFFFFFFFF: + if (regime_sctlr(env, mmu_idx) & SCTLR_V) { + /* hivecs execing is ok */ + *prot |= PAGE_EXEC; + } + break; + case 0x00000000 ... 0x7FFFFFFF: *prot |= PAGE_EXEC; + break; + } + } else { + /* Default system address map for M profile cores. + * The architecture specifies which regions are execute-never; + * at the MPU level no other checks are defined. + */ + switch (address) { + case 0x00000000 ... 0x1fffffff: /* ROM */ + case 0x20000000 ... 0x3fffffff: /* SRAM */ + case 0x60000000 ... 0x7fffffff: /* RAM */ + case 0x80000000 ... 0x9fffffff: /* RAM */ + *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; + break; + case 0x40000000 ... 0x5fffffff: /* Peripheral */ + case 0xa0000000 ... 0xbfffffff: /* Device */ + case 0xc0000000 ... 0xdfffffff: /* Device */ + case 0xe0000000 ... 0xffffffff: /* System */ + *prot = PAGE_READ | PAGE_WRITE; + break; + default: + g_assert_not_reached(); } - break; - case 0x00000000 ... 0x7FFFFFFF: - *prot |= PAGE_EXEC; - break; } - } static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, -- 2.7.4 All M profile CPUs are PMSA, so set the feature bit. (We haven't actually implemented the M profile MPU register interface yet, but setting this feature bit gives us closer to correct behaviour for the MPU-disabled case.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1493122030-32191-11-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); + /* M profile implies PMSA. We have to do this here rather than + * in realize with the other feature-implication checks because + * we look at the PMSA bit to see if we should add some properties. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_M)) { + set_feature(&cpu->env, ARM_FEATURE_PMSA); + } + if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { qdev_property_add_static(DEVICE(obj), &arm_cpu_reset_cbar_property, -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> General logic is that operations stopped by the MPU are MemManage, and those which go through the MPU and are caught by the unassigned handle are BusFault. Distinguish these by looking at the exception.fsr values, and set the CFSR bits and (if appropriate) fill in the BFAR or MMFAR with the exception address. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Message-id: 1493122030-32191-12-git-send-email-peter.maydell@linaro.org [PMM: i-side faults do not set BFAR/MMFAR, only d-side; added some CPU_LOG_INT logging] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- target/arm/helper.c | 45 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 42 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* TODO: if we implemented the MPU registers, this is where we - * should set the MMFAR, etc from exception.fsr and exception.vaddress. + /* Note that for M profile we don't have a guest facing FSR, but + * the env->exception.fsr will be populated by the code that + * raises the fault, in the A profile short-descriptor format. */ - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM); + switch (env->exception.fsr & 0xf) { + case 0x8: /* External Abort */ + switch (cs->exception_index) { + case EXCP_PREFETCH_ABORT: + env->v7m.cfsr |= R_V7M_CFSR_PRECISERR_MASK; + qemu_log_mask(CPU_LOG_INT, "...with CFSR.PRECISERR\n"); + break; + case EXCP_DATA_ABORT: + env->v7m.cfsr |= + (R_V7M_CFSR_IBUSERR_MASK | R_V7M_CFSR_BFARVALID_MASK); + env->v7m.bfar = env->exception.vaddress; + qemu_log_mask(CPU_LOG_INT, + "...with CFSR.IBUSERR and BFAR 0x%x\n", + env->v7m.bfar); + break; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS); + break; + default: + /* All other FSR values are either MPU faults or "can't happen + * for M profile" cases. + */ + switch (cs->exception_index) { + case EXCP_PREFETCH_ABORT: + env->v7m.cfsr |= R_V7M_CFSR_IACCVIOL_MASK; + qemu_log_mask(CPU_LOG_INT, "...with CFSR.IACCVIOL\n"); + break; + case EXCP_DATA_ABORT: + env->v7m.cfsr |= + (R_V7M_CFSR_DACCVIOL_MASK | R_V7M_CFSR_MMARVALID_MASK); + env->v7m.mmfar = env->exception.vaddress; + qemu_log_mask(CPU_LOG_INT, + "...with CFSR.DACCVIOL and MMFAR 0x%x\n", + env->v7m.mmfar); + break; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM); + break; + } break; case EXCP_BKPT: if (semihosting_enabled()) { -- 2.7.4 From: Michael Davidsaver <mdavidsaver@gmail.com> The M series MPU is almost the same as the already implemented R profile MPU (v7 PMSA). So all we need to implement here is the MPU register interface in the system register space. This implementation has the same restriction as the R profile MPU that it doesn't permit regions to be sized down smaller than 1K. We also do not yet implement support for MPU_CTRL.HFNMIENA; this bit should if zero disable use of the MPU when running HardFault, NMI or with FAULTMASK set to 1 (ie at an execution priority of less than zero) -- if the MPU is enabled we don't treat these cases any differently. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Message-id: 1493122030-32191-13-git-send-email-peter.maydell@linaro.org [PMM: Keep all the bits in mpu_ctrl field, rather than using SCTLR bits for them; drop broken HFNMIENA support; various cleanup] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 6 +++ hw/intc/armv7m_nvic.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++ target/arm/helper.c | 25 +++++++++++- target/arm/machine.c | 5 ++- 4 files changed, 137 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t dfsr; /* Debug Fault Status Register */ uint32_t mmfar; /* MemManage Fault Address */ uint32_t bfar; /* BusFault Address */ + unsigned mpu_ctrl; /* MPU_CTRL (some bits kept in sctlr_el[1]) */ int exception; } v7m; @@ -XXX,XX +XXX,XX @@ FIELD(V7M_DFSR, DWTTRAP, 2, 1) FIELD(V7M_DFSR, VCATCH, 3, 1) FIELD(V7M_DFSR, EXTERNAL, 4, 1) +/* v7M MPU_CTRL bits */ +FIELD(V7M_MPU_CTRL, ENABLE, 0, 1) +FIELD(V7M_MPU_CTRL, HFNMIENA, 1, 1) +FIELD(V7M_MPU_CTRL, PRIVDEFENA, 2, 1) + /* If adding a feature bit which corresponds to a Linux ELF * HWCAP bit, remember to update the feature-bit-to-hwcap * mapping in linux-user/elfload.c:get_elf_hwcap(). diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" +#include "exec/exec-all.h" #include "qemu/log.h" #include "trace.h" @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) case 0xd70: /* ISAR4. */ return 0x01310102; /* TODO: Implement debug registers. */ + case 0xd90: /* MPU_TYPE */ + /* Unified MPU; if the MPU is not present this value is zero */ + return cpu->pmsav7_dregion << 8; + break; + case 0xd94: /* MPU_CTRL */ + return cpu->env.v7m.mpu_ctrl; + case 0xd98: /* MPU_RNR */ + return cpu->env.cp15.c6_rgnr; + case 0xd9c: /* MPU_RBAR */ + case 0xda4: /* MPU_RBAR_A1 */ + case 0xdac: /* MPU_RBAR_A2 */ + case 0xdb4: /* MPU_RBAR_A3 */ + { + int region = cpu->env.cp15.c6_rgnr; + + if (region >= cpu->pmsav7_dregion) { + return 0; + } + return (cpu->env.pmsav7.drbar[region] & 0x1f) | (region & 0xf); + } + case 0xda0: /* MPU_RASR */ + case 0xda8: /* MPU_RASR_A1 */ + case 0xdb0: /* MPU_RASR_A2 */ + case 0xdb8: /* MPU_RASR_A3 */ + { + int region = cpu->env.cp15.c6_rgnr; + + if (region >= cpu->pmsav7_dregion) { + return 0; + } + return ((cpu->env.pmsav7.dracr[region] & 0xffff) << 16) | + (cpu->env.pmsav7.drsr[region] & 0xffff); + } default: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); return 0; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) qemu_log_mask(LOG_UNIMP, "NVIC: Aux fault status registers unimplemented\n"); break; + case 0xd90: /* MPU_TYPE */ + return; /* RO */ + case 0xd94: /* MPU_CTRL */ + if ((value & + (R_V7M_MPU_CTRL_HFNMIENA_MASK | R_V7M_MPU_CTRL_ENABLE_MASK)) + == R_V7M_MPU_CTRL_HFNMIENA_MASK) { + qemu_log_mask(LOG_GUEST_ERROR, "MPU_CTRL: HFNMIENA and !ENABLE is " + "UNPREDICTABLE\n"); + } + cpu->env.v7m.mpu_ctrl = value & (R_V7M_MPU_CTRL_ENABLE_MASK | + R_V7M_MPU_CTRL_HFNMIENA_MASK | + R_V7M_MPU_CTRL_PRIVDEFENA_MASK); + tlb_flush(CPU(cpu)); + break; + case 0xd98: /* MPU_RNR */ + if (value >= cpu->pmsav7_dregion) { + qemu_log_mask(LOG_GUEST_ERROR, "MPU region out of range %" + PRIu32 "/%" PRIu32 "\n", + value, cpu->pmsav7_dregion); + } else { + cpu->env.cp15.c6_rgnr = value; + } + break; + case 0xd9c: /* MPU_RBAR */ + case 0xda4: /* MPU_RBAR_A1 */ + case 0xdac: /* MPU_RBAR_A2 */ + case 0xdb4: /* MPU_RBAR_A3 */ + { + int region; + + if (value & (1 << 4)) { + /* VALID bit means use the region number specified in this + * value and also update MPU_RNR.REGION with that value. + */ + region = extract32(value, 0, 4); + if (region >= cpu->pmsav7_dregion) { + qemu_log_mask(LOG_GUEST_ERROR, + "MPU region out of range %u/%" PRIu32 "\n", + region, cpu->pmsav7_dregion); + return; + } + cpu->env.cp15.c6_rgnr = region; + } else { + region = cpu->env.cp15.c6_rgnr; + } + + if (region >= cpu->pmsav7_dregion) { + return; + } + + cpu->env.pmsav7.drbar[region] = value & ~0x1f; + tlb_flush(CPU(cpu)); + break; + } + case 0xda0: /* MPU_RASR */ + case 0xda8: /* MPU_RASR_A1 */ + case 0xdb0: /* MPU_RASR_A2 */ + case 0xdb8: /* MPU_RASR_A3 */ + { + int region = cpu->env.cp15.c6_rgnr; + + if (region >= cpu->pmsav7_dregion) { + return; + } + + cpu->env.pmsav7.drsr[region] = value & 0xff3f; + cpu->env.pmsav7.dracr[region] = (value >> 16) & 0x173f; + tlb_flush(CPU(cpu)); + break; + } case 0xf00: /* Software Triggered Interrupt Register */ { /* user mode can only write to STIR if CCR.USERSETMPEND permits it */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t regime_sctlr(CPUARMState *env, ARMMMUIdx mmu_idx) static inline bool regime_translation_disabled(CPUARMState *env, ARMMMUIdx mmu_idx) { + if (arm_feature(env, ARM_FEATURE_M)) { + return !(env->v7m.mpu_ctrl & R_V7M_MPU_CTRL_ENABLE_MASK); + } + if (mmu_idx == ARMMMUIdx_S2NS) { return (env->cp15.hcr_el2 & HCR_VM) == 0; } @@ -XXX,XX +XXX,XX @@ static inline void get_phys_addr_pmsav7_default(CPUARMState *env, } } +static bool pmsav7_use_background_region(ARMCPU *cpu, + ARMMMUIdx mmu_idx, bool is_user) +{ + /* Return true if we should use the default memory map as a + * "background" region if there are no hits against any MPU regions. + */ + CPUARMState *env = &cpu->env; + + if (is_user) { + return false; + } + + if (arm_feature(env, ARM_FEATURE_M)) { + return env->v7m.mpu_ctrl & R_V7M_MPU_CTRL_PRIVDEFENA_MASK; + } else { + return regime_sctlr(env, mmu_idx) & SCTLR_BR; + } +} + static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, int access_type, ARMMMUIdx mmu_idx, hwaddr *phys_ptr, int *prot, uint32_t *fsr) @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (n == -1) { /* no hits */ - if (is_user || !(regime_sctlr(env, mmu_idx) & SCTLR_BR)) { + if (!pmsav7_use_background_region(cpu, mmu_idx, is_user)) { /* background fault */ *fsr = 0; return true; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static bool m_needed(void *opaque) static const VMStateDescription vmstate_m = { .name = "cpu/m", - .version_id = 3, - .minimum_version_id = 3, + .version_id = 4, + .minimum_version_id = 4, .needed = m_needed, .fields = (VMStateField[]) { VMSTATE_UINT32(env.v7m.vecbase, ARMCPU), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { VMSTATE_UINT32(env.v7m.dfsr, ARMCPU), VMSTATE_UINT32(env.v7m.mmfar, ARMCPU), VMSTATE_UINT32(env.v7m.bfar, ARMCPU), + VMSTATE_UINT32(env.v7m.mpu_ctrl, ARMCPU), VMSTATE_INT32(env.v7m.exception, ARMCPU), VMSTATE_END_OF_LIST() } -- 2.7.4 Implement HFNMIENA support for the M profile MPU. This bit controls whether the MPU is treated as enabled when executing at execution priorities of less than zero (in NMI, HardFault or with the FAULTMASK bit set). Doing this requires us to use a different MMU index for "running at execution priority < 0", because we will have different access permissions for that case versus the normal case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1493122030-32191-14-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 24 +++++++++++++++++++++++- target/arm/helper.c | 18 +++++++++++++++++- target/arm/translate.c | 1 + 3 files changed, 41 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, * for the accesses done as part of a stage 1 page table walk, rather than * having to walk the stage 2 page table over and over.) * + * R profile CPUs have an MPU, but can use the same set of MMU indexes + * as A profile. They only need to distinguish NS EL0 and NS EL1 (and + * NS EL2 if we ever model a Cortex-R52). + * + * M profile CPUs are rather different as they do not have a true MMU. + * They have the following different MMU indexes: + * User + * Privileged + * Execution priority negative (this is like privileged, but the + * MPU HFNMIENA bit means that it may have different access permission + * check results to normal privileged code, so can't share a TLB). + * * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code * are not quite the same -- different CPU types (most notably M profile * vs A/R profile) would like to use MMU indexes with different semantics, @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdx { ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A, ARMMMUIdx_MUser = 0 | ARM_MMU_IDX_M, ARMMMUIdx_MPriv = 1 | ARM_MMU_IDX_M, + ARMMMUIdx_MNegPri = 2 | ARM_MMU_IDX_M, /* Indexes below here don't have TLBs and are used only for AT system * instructions or for the first stage of an S12 page table walk. */ @@ -XXX,XX +XXX,XX @@ typedef enum ARMMMUIdxBit { ARMMMUIdxBit_S2NS = 1 << 6, ARMMMUIdxBit_MUser = 1 << 0, ARMMMUIdxBit_MPriv = 1 << 1, + ARMMMUIdxBit_MNegPri = 1 << 2, } ARMMMUIdxBit; #define MMU_USER_IDX 0 @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) case ARM_MMU_IDX_A: return mmu_idx & 3; case ARM_MMU_IDX_M: - return mmu_idx & 1; + return mmu_idx == ARMMMUIdx_MUser ? 0 : 1; default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) if (arm_feature(env, ARM_FEATURE_M)) { ARMMMUIdx mmu_idx = el == 0 ? ARMMMUIdx_MUser : ARMMMUIdx_MPriv; + /* Execution priority is negative if FAULTMASK is set or + * we're in a HardFault or NMI handler. + */ + if ((env->v7m.exception > 0 && env->v7m.exception <= 3) + || env->daif & PSTATE_F) { + return arm_to_core_mmu_idx(ARMMMUIdx_MNegPri); + } + return arm_to_core_mmu_idx(mmu_idx); } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t regime_el(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1NSE0: case ARMMMUIdx_S1NSE1: case ARMMMUIdx_MPriv: + case ARMMMUIdx_MNegPri: case ARMMMUIdx_MUser: return 1; default: @@ -XXX,XX +XXX,XX @@ static inline bool regime_is_secure(CPUARMState *env, ARMMMUIdx mmu_idx) case ARMMMUIdx_S1E2: case ARMMMUIdx_S2NS: case ARMMMUIdx_MPriv: + case ARMMMUIdx_MNegPri: case ARMMMUIdx_MUser: return false; case ARMMMUIdx_S1E3: @@ -XXX,XX +XXX,XX @@ static inline bool regime_translation_disabled(CPUARMState *env, ARMMMUIdx mmu_idx) { if (arm_feature(env, ARM_FEATURE_M)) { - return !(env->v7m.mpu_ctrl & R_V7M_MPU_CTRL_ENABLE_MASK); + switch (env->v7m.mpu_ctrl & + (R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK)) { + case R_V7M_MPU_CTRL_ENABLE_MASK: + /* Enabled, but not for HardFault and NMI */ + return mmu_idx == ARMMMUIdx_MNegPri; + case R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK: + /* Enabled for all cases */ + return false; + case 0: + default: + /* HFNMIENA set and ENABLE clear is UNPREDICTABLE, but + * we warned about that in armv7m_nvic.c when the guest set it. + */ + return true; + } } if (mmu_idx == ARMMMUIdx_S2NS) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline int get_a32_user_mem_index(DisasContext *s) return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0); case ARMMMUIdx_MUser: case ARMMMUIdx_MPriv: + case ARMMMUIdx_MNegPri: return arm_to_core_mmu_idx(ARMMMUIdx_MUser); case ARMMMUIdx_S2NS: default: -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Multiple I2C commands can be fired simultaneously and the controller execute the commands following these priorities: (1) Master Start Command (2) Master Transmit Command (3) Slave Transmit Command or Master Receive Command (4) Master Stop Command The current code is incorrect with respect to the above sequence and needs to be reworked to handle each individual command. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/aspeed_i2c.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { + bus->cmd &= ~0xFFFF; bus->cmd |= value & 0xFFFF; bus->intr_status = 0; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status |= I2CD_INTR_TX_ACK; } - } else if (bus->cmd & I2CD_M_TX_CMD) { + /* START command is also a TX command, as the slave address is + * sent on the bus */ + bus->cmd &= ~(I2CD_M_START_CMD | I2CD_M_TX_CMD); + + /* No slave found */ + if (!i2c_bus_busy(bus->bus)) { + return; + } + } + + if (bus->cmd & I2CD_M_TX_CMD) { if (i2c_send(bus->bus, bus->buf)) { bus->intr_status |= (I2CD_INTR_TX_NAK | I2CD_INTR_ABNORMAL); i2c_end_transfer(bus->bus); } else { bus->intr_status |= I2CD_INTR_TX_ACK; } + bus->cmd &= ~I2CD_M_TX_CMD; + } - } else if (bus->cmd & I2CD_M_RX_CMD) { + if (bus->cmd & I2CD_M_RX_CMD) { int ret = i2c_recv(bus->bus); if (ret < 0) { qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__); @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status |= I2CD_INTR_RX_DONE; } bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; + bus->cmd &= ~I2CD_M_RX_CMD; } if (bus->cmd & (I2CD_M_STOP_CMD | I2CD_M_S_RX_CMD_LAST)) { @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) i2c_end_transfer(bus->bus); bus->intr_status |= I2CD_INTR_NORMAL_STOP; } + bus->cmd &= ~I2CD_M_STOP_CMD; } - - /* command is handled, reset it and check for interrupts */ - bus->cmd &= ~0xFFFF; - aspeed_i2c_bus_raise_interrupt(bus); } static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, } aspeed_i2c_bus_handle_cmd(bus, value); + aspeed_i2c_bus_raise_interrupt(bus); break; default: -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Today, the LAST command is handled with the STOP command but this is incorrect. Also nack the I2C bus when a LAST is issued. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/aspeed_i2c.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->cmd &= ~I2CD_M_TX_CMD; } - if (bus->cmd & I2CD_M_RX_CMD) { + if (bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST)) { int ret = i2c_recv(bus->bus); if (ret < 0) { qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__); @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status |= I2CD_INTR_RX_DONE; } bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; - bus->cmd &= ~I2CD_M_RX_CMD; + if (bus->cmd & I2CD_M_S_RX_CMD_LAST) { + i2c_nack(bus->bus); + } + bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST); } - if (bus->cmd & (I2CD_M_STOP_CMD | I2CD_M_S_RX_CMD_LAST)) { + if (bus->cmd & I2CD_M_STOP_CMD) { if (!i2c_bus_busy(bus->bus)) { bus->intr_status |= I2CD_INTR_ABNORMAL; } else { -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> The Aspeed I2C controller maintains a state machine in the command register, which is mostly used for debug. Let's start adding a few states to handle abnormal STOP commands. Today, the model uses the busy status of the bus as a condition to do so but it is not precise enough. Also remove the ABNORMAL bit for failing TX commands. This is incorrect with respect to the specs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/aspeed_i2c.c | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, } } +static void aspeed_i2c_set_state(AspeedI2CBus *bus, uint8_t state) +{ + bus->cmd &= ~(I2CD_TX_STATE_MASK << I2CD_TX_STATE_SHIFT); + bus->cmd |= (state & I2CD_TX_STATE_MASK) << I2CD_TX_STATE_SHIFT; +} + +static uint8_t aspeed_i2c_get_state(AspeedI2CBus *bus) +{ + return (bus->cmd >> I2CD_TX_STATE_SHIFT) & I2CD_TX_STATE_MASK; +} + +/* + * The state machine needs some refinement. It is only used to track + * invalid STOP commands for the moment. + */ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { bus->cmd &= ~0xFFFF; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) bus->intr_status = 0; if (bus->cmd & I2CD_M_START_CMD) { + uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ? + I2CD_MSTARTR : I2CD_MSTART; + + aspeed_i2c_set_state(bus, state); + if (i2c_start_transfer(bus->bus, extract32(bus->buf, 1, 7), extract32(bus->buf, 0, 1))) { bus->intr_status |= I2CD_INTR_TX_NAK; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) if (!i2c_bus_busy(bus->bus)) { return; } + aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if (bus->cmd & I2CD_M_TX_CMD) { + aspeed_i2c_set_state(bus, I2CD_MTXD); if (i2c_send(bus->bus, bus->buf)) { - bus->intr_status |= (I2CD_INTR_TX_NAK | I2CD_INTR_ABNORMAL); + bus->intr_status |= (I2CD_INTR_TX_NAK); i2c_end_transfer(bus->bus); } else { bus->intr_status |= I2CD_INTR_TX_ACK; } bus->cmd &= ~I2CD_M_TX_CMD; + aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if (bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST)) { - int ret = i2c_recv(bus->bus); + int ret; + + aspeed_i2c_set_state(bus, I2CD_MRXD); + ret = i2c_recv(bus->bus); if (ret < 0) { qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__); ret = 0xff; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) i2c_nack(bus->bus); } bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST); + aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if (bus->cmd & I2CD_M_STOP_CMD) { - if (!i2c_bus_busy(bus->bus)) { + if (!(aspeed_i2c_get_state(bus) & I2CD_MACTIVE)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: abnormal stop\n", __func__); bus->intr_status |= I2CD_INTR_ABNORMAL; } else { + aspeed_i2c_set_state(bus, I2CD_MSTOP); i2c_end_transfer(bus->bus); bus->intr_status |= I2CD_INTR_NORMAL_STOP; } bus->cmd &= ~I2CD_M_STOP_CMD; + aspeed_i2c_set_state(bus, I2CD_IDLE); } } -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Let's add an RTC to the palmetto BMC and a LM75 temperature sensor to the AST2500 EVB to start with. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-5-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ typedef struct AspeedBoardConfig { const char *fmc_model; const char *spi_model; uint32_t num_cs; + void (*i2c_init)(AspeedBoardState *bmc); } AspeedBoardConfig; enum { @@ -XXX,XX +XXX,XX @@ enum { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +static void palmetto_bmc_i2c_init(AspeedBoardState *bmc); +static void ast2500_evb_i2c_init(AspeedBoardState *bmc); + static const AspeedBoardConfig aspeed_boards[] = { [PALMETTO_BMC] = { .soc_name = "ast2400-a1", @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .fmc_model = "n25q256a", .spi_model = "mx25l25635e", .num_cs = 1, + .i2c_init = palmetto_bmc_i2c_init, }, [AST2500_EVB] = { .soc_name = "ast2500-a1", @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .fmc_model = "n25q256a", .spi_model = "mx25l25635e", .num_cs = 1, + .i2c_init = ast2500_evb_i2c_init, }, [ROMULUS_BMC] = { .soc_name = "ast2500-a1", @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, aspeed_board_binfo.ram_size = ram_size; aspeed_board_binfo.loader_start = sc->info->sdram_base; + if (cfg->i2c_init) { + cfg->i2c_init(bmc); + } + arm_load_kernel(ARM_CPU(first_cpu), &aspeed_board_binfo); } +static void palmetto_bmc_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + /* The palmetto platform expects a ds3231 RTC but a ds1338 is + * enough to provide basic RTC features. Alarms will be missing */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68); +} + static void palmetto_bmc_init(MachineState *machine) { aspeed_board_init(machine, &aspeed_boards[PALMETTO_BMC]); @@ -XXX,XX +XXX,XX @@ static const TypeInfo palmetto_bmc_type = { .class_init = palmetto_bmc_class_init, }; +static void ast2500_evb_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); +} + static void ast2500_evb_init(MachineState *machine) { aspeed_board_init(machine, &aspeed_boards[AST2500_EVB]); -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Largely inspired by the TMP105 temperature sensor, here is a model for the TMP42{1,2,3} temperature sensors. Specs can be found here : http://www.ti.com/lit/gpn/tmp421 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-6-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + hw/misc/tmp421.c | 401 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 3 files changed, 403 insertions(+) create mode 100644 hw/misc/tmp421.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_APPLESMC) += applesmc.o common-obj-$(CONFIG_MAX111X) += max111x.o common-obj-$(CONFIG_TMP105) += tmp105.o +common-obj-$(CONFIG_TMP421) += tmp421.o common-obj-$(CONFIG_ISA_DEBUG) += debugexit.o common-obj-$(CONFIG_SGA) += sga.o common-obj-$(CONFIG_ISA_TESTDEV) += pc-testdev.o diff --git a/hw/misc/tmp421.c b/hw/misc/tmp421.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/tmp421.c @@ -XXX,XX +XXX,XX @@ +/* + * Texas Instruments TMP421 temperature sensor. + * + * Copyright (c) 2016 IBM Corporation. + * + * Largely inspired by : + * + * Texas Instruments TMP105 temperature sensor. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski <andrew@openedhand.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "hw/hw.h" +#include "hw/i2c/i2c.h" +#include "qapi/error.h" +#include "qapi/visitor.h" + +/* Manufacturer / Device ID's */ +#define TMP421_MANUFACTURER_ID 0x55 +#define TMP421_DEVICE_ID 0x21 +#define TMP422_DEVICE_ID 0x22 +#define TMP423_DEVICE_ID 0x23 + +typedef struct DeviceInfo { + int model; + const char *name; +} DeviceInfo; + +static const DeviceInfo devices[] = { + { TMP421_DEVICE_ID, "tmp421" }, + { TMP422_DEVICE_ID, "tmp422" }, + { TMP423_DEVICE_ID, "tmp423" }, +}; + +typedef struct TMP421State { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + + int16_t temperature[4]; + + uint8_t status; + uint8_t config[2]; + uint8_t rate; + + uint8_t len; + uint8_t buf[2]; + uint8_t pointer; + +} TMP421State; + +typedef struct TMP421Class { + I2CSlaveClass parent_class; + DeviceInfo *dev; +} TMP421Class; + +#define TYPE_TMP421 "tmp421-generic" +#define TMP421(obj) OBJECT_CHECK(TMP421State, (obj), TYPE_TMP421) + +#define TMP421_CLASS(klass) \ + OBJECT_CLASS_CHECK(TMP421Class, (klass), TYPE_TMP421) +#define TMP421_GET_CLASS(obj) \ + OBJECT_GET_CLASS(TMP421Class, (obj), TYPE_TMP421) + +/* the TMP421 registers */ +#define TMP421_STATUS_REG 0x08 +#define TMP421_STATUS_BUSY (1 << 7) +#define TMP421_CONFIG_REG_1 0x09 +#define TMP421_CONFIG_RANGE (1 << 2) +#define TMP421_CONFIG_SHUTDOWN (1 << 6) +#define TMP421_CONFIG_REG_2 0x0A +#define TMP421_CONFIG_RC (1 << 2) +#define TMP421_CONFIG_LEN (1 << 3) +#define TMP421_CONFIG_REN (1 << 4) +#define TMP421_CONFIG_REN2 (1 << 5) +#define TMP421_CONFIG_REN3 (1 << 6) + +#define TMP421_CONVERSION_RATE_REG 0x0B +#define TMP421_ONE_SHOT 0x0F + +#define TMP421_RESET 0xFC +#define TMP421_MANUFACTURER_ID_REG 0xFE +#define TMP421_DEVICE_ID_REG 0xFF + +#define TMP421_TEMP_MSB0 0x00 +#define TMP421_TEMP_MSB1 0x01 +#define TMP421_TEMP_MSB2 0x02 +#define TMP421_TEMP_MSB3 0x03 +#define TMP421_TEMP_LSB0 0x10 +#define TMP421_TEMP_LSB1 0x11 +#define TMP421_TEMP_LSB2 0x12 +#define TMP421_TEMP_LSB3 0x13 + +static const int32_t mins[2] = { -40000, -55000 }; +static const int32_t maxs[2] = { 127000, 150000 }; + +static void tmp421_get_temperature(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + TMP421State *s = TMP421(obj); + bool ext_range = (s->config[0] & TMP421_CONFIG_RANGE); + int offset = ext_range * 64 * 256; + int64_t value; + int tempid; + + if (sscanf(name, "temperature%d", &tempid) != 1) { + error_setg(errp, "error reading %s: %m", name); + return; + } + + if (tempid >= 4 || tempid < 0) { + error_setg(errp, "error reading %s", name); + return; + } + + value = ((s->temperature[tempid] - offset) * 1000 + 128) / 256; + + visit_type_int(v, name, &value, errp); +} + +/* Units are 0.001 centigrades relative to 0 C. s->temperature is 8.8 + * fixed point, so units are 1/256 centigrades. A simple ratio will do. + */ +static void tmp421_set_temperature(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + TMP421State *s = TMP421(obj); + Error *local_err = NULL; + int64_t temp; + bool ext_range = (s->config[0] & TMP421_CONFIG_RANGE); + int offset = ext_range * 64 * 256; + int tempid; + + visit_type_int(v, name, &temp, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + + if (temp >= maxs[ext_range] || temp < mins[ext_range]) { + error_setg(errp, "value %" PRId64 ".%03" PRIu64 " °C is out of range", + temp / 1000, temp % 1000); + return; + } + + if (sscanf(name, "temperature%d", &tempid) != 1) { + error_setg(errp, "error reading %s: %m", name); + return; + } + + if (tempid >= 4 || tempid < 0) { + error_setg(errp, "error reading %s", name); + return; + } + + s->temperature[tempid] = (int16_t) ((temp * 256 - 128) / 1000) + offset; +} + +static void tmp421_read(TMP421State *s) +{ + TMP421Class *sc = TMP421_GET_CLASS(s); + + s->len = 0; + + switch (s->pointer) { + case TMP421_MANUFACTURER_ID_REG: + s->buf[s->len++] = TMP421_MANUFACTURER_ID; + break; + case TMP421_DEVICE_ID_REG: + s->buf[s->len++] = sc->dev->model; + break; + case TMP421_CONFIG_REG_1: + s->buf[s->len++] = s->config[0]; + break; + case TMP421_CONFIG_REG_2: + s->buf[s->len++] = s->config[1]; + break; + case TMP421_CONVERSION_RATE_REG: + s->buf[s->len++] = s->rate; + break; + case TMP421_STATUS_REG: + s->buf[s->len++] = s->status; + break; + + /* FIXME: check for channel enablement in config registers */ + case TMP421_TEMP_MSB0: + s->buf[s->len++] = (((uint16_t) s->temperature[0]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[0]) >> 0) & 0xf0; + break; + case TMP421_TEMP_MSB1: + s->buf[s->len++] = (((uint16_t) s->temperature[1]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[1]) >> 0) & 0xf0; + break; + case TMP421_TEMP_MSB2: + s->buf[s->len++] = (((uint16_t) s->temperature[2]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[2]) >> 0) & 0xf0; + break; + case TMP421_TEMP_MSB3: + s->buf[s->len++] = (((uint16_t) s->temperature[3]) >> 8); + s->buf[s->len++] = (((uint16_t) s->temperature[3]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB0: + s->buf[s->len++] = (((uint16_t) s->temperature[0]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB1: + s->buf[s->len++] = (((uint16_t) s->temperature[1]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB2: + s->buf[s->len++] = (((uint16_t) s->temperature[2]) >> 0) & 0xf0; + break; + case TMP421_TEMP_LSB3: + s->buf[s->len++] = (((uint16_t) s->temperature[3]) >> 0) & 0xf0; + break; + } +} + +static void tmp421_reset(I2CSlave *i2c); + +static void tmp421_write(TMP421State *s) +{ + switch (s->pointer) { + case TMP421_CONVERSION_RATE_REG: + s->rate = s->buf[0]; + break; + case TMP421_CONFIG_REG_1: + s->config[0] = s->buf[0]; + break; + case TMP421_CONFIG_REG_2: + s->config[1] = s->buf[0]; + break; + case TMP421_RESET: + tmp421_reset(I2C_SLAVE(s)); + break; + } +} + +static int tmp421_rx(I2CSlave *i2c) +{ + TMP421State *s = TMP421(i2c); + + if (s->len < 2) { + return s->buf[s->len++]; + } else { + return 0xff; + } +} + +static int tmp421_tx(I2CSlave *i2c, uint8_t data) +{ + TMP421State *s = TMP421(i2c); + + if (s->len == 0) { + /* first byte is the register pointer for a read or write + * operation */ + s->pointer = data; + s->len++; + } else if (s->len == 1) { + /* second byte is the data to write. The device only supports + * one byte writes */ + s->buf[0] = data; + tmp421_write(s); + } + + return 0; +} + +static int tmp421_event(I2CSlave *i2c, enum i2c_event event) +{ + TMP421State *s = TMP421(i2c); + + if (event == I2C_START_RECV) { + tmp421_read(s); + } + + s->len = 0; + return 0; +} + +static const VMStateDescription vmstate_tmp421 = { + .name = "TMP421", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(len, TMP421State), + VMSTATE_UINT8_ARRAY(buf, TMP421State, 2), + VMSTATE_UINT8(pointer, TMP421State), + VMSTATE_UINT8_ARRAY(config, TMP421State, 2), + VMSTATE_UINT8(status, TMP421State), + VMSTATE_UINT8(rate, TMP421State), + VMSTATE_INT16_ARRAY(temperature, TMP421State, 4), + VMSTATE_I2C_SLAVE(i2c, TMP421State), + VMSTATE_END_OF_LIST() + } +}; + +static void tmp421_reset(I2CSlave *i2c) +{ + TMP421State *s = TMP421(i2c); + TMP421Class *sc = TMP421_GET_CLASS(s); + + memset(s->temperature, 0, sizeof(s->temperature)); + s->pointer = 0; + + s->config[0] = 0; /* TMP421_CONFIG_RANGE */ + + /* resistance correction and channel enablement */ + switch (sc->dev->model) { + case TMP421_DEVICE_ID: + s->config[1] = 0x1c; + break; + case TMP422_DEVICE_ID: + s->config[1] = 0x3c; + break; + case TMP423_DEVICE_ID: + s->config[1] = 0x7c; + break; + } + + s->rate = 0x7; /* 8Hz */ + s->status = 0; +} + +static int tmp421_init(I2CSlave *i2c) +{ + TMP421State *s = TMP421(i2c); + + tmp421_reset(&s->i2c); + + return 0; +} + +static void tmp421_initfn(Object *obj) +{ + object_property_add(obj, "temperature0", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); + object_property_add(obj, "temperature1", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); + object_property_add(obj, "temperature2", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); + object_property_add(obj, "temperature3", "int", + tmp421_get_temperature, + tmp421_set_temperature, NULL, NULL, NULL); +} + +static void tmp421_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + TMP421Class *sc = TMP421_CLASS(klass); + + k->init = tmp421_init; + k->event = tmp421_event; + k->recv = tmp421_rx; + k->send = tmp421_tx; + dc->vmsd = &vmstate_tmp421; + sc->dev = (DeviceInfo *) data; +} + +static const TypeInfo tmp421_info = { + .name = TYPE_TMP421, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(TMP421State), + .instance_init = tmp421_initfn, + .class_init = tmp421_class_init, +}; + +static void tmp421_register_types(void) +{ + int i; + + type_register_static(&tmp421_info); + for (i = 0; i < ARRAY_SIZE(devices); ++i) { + TypeInfo ti = { + .name = devices[i].name, + .parent = TYPE_TMP421, + .class_init = tmp421_class_init, + .class_data = (void *) &devices[i], + }; + type_register(&ti); + } +} + +type_init(tmp421_register_types) diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_TWL92230=y CONFIG_TSC2005=y CONFIG_LM832X=y CONFIG_TMP105=y +CONFIG_TMP421=y CONFIG_STELLARIS=y CONFIG_STELLARIS_INPUT=y CONFIG_STELLARIS_ENET=y -- 2.7.4 From: Cédric Le Goater <clg@kaod.org> Temperatures can be changed from the monitor with : (qemu) qom-set /machine/unattached/device[2] temperature0 12000 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-7-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, static void palmetto_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; + DeviceState *dev; /* The palmetto platform expects a ds3231 RTC but a ds1338 is * enough to provide basic RTC features. Alarms will be missing */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68); + + /* add a TMP423 temperature sensor */ + dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2), + "tmp423", 0x4c); + object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort); + object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort); + object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort); + object_property_set_int(OBJECT(dev), 110000, "temperature3", &error_abort); } static void palmetto_bmc_init(MachineState *machine) -- 2.7.4 From: Andrew Jones <drjones@redhat.com> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 20170529173751.3443-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) if (nb_numa_nodes > 0) { acpi_add_table(table_offsets, tables_blob); build_srat(tables_blob, tables->linker, vms); + if (have_numa_distance) { + acpi_add_table(table_offsets, tables_blob); + build_slit(tables_blob, tables->linker); + } } if (its_class_name() && !vmc->no_its) { -- 2.7.4 From: Andrew Jones <drjones@redhat.com> This is based on patch Shannon Zhao originally posted. Cc: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 20170529173751.3443-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(VirtMachineState *vms) "clk24mhz"); qemu_fdt_setprop_cell(fdt, "/apb-pclk", "phandle", vms->clock_phandle); + if (have_numa_distance) { + int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t); + uint32_t *matrix = g_malloc0(size); + int idx, i, j; + + for (i = 0; i < nb_numa_nodes; i++) { + for (j = 0; j < nb_numa_nodes; j++) { + idx = (i * nb_numa_nodes + j) * 3; + matrix[idx + 0] = cpu_to_be32(i); + matrix[idx + 1] = cpu_to_be32(j); + matrix[idx + 2] = cpu_to_be32(numa_info[i].distance[j]); + } + } + + qemu_fdt_add_subnode(fdt, "/distance-map"); + qemu_fdt_setprop_string(fdt, "/distance-map", "compatible", + "numa-distance-map-v1"); + qemu_fdt_setprop(fdt, "/distance-map", "distance-matrix", + matrix, size); + g_free(matrix); + } } static void fdt_add_psci_node(const VirtMachineState *vms) -- 2.7.4 arm queue; dunno if this will be the last before softfreeze or not, but anyway probably the last large one. New orangepi-pc board model is the big item here. thanks -- PMM The following changes since commit 67d9ef7d541c3d21a25796c51c26da096a433565: Merge remote-tracking branch 'remotes/pmaydell/tags/pull-docs-20200312' into staging (2020-03-12 15:20:52 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200312 for you to fetch changes up to aca53be34ac3e7cac5f39396a51a338860a5a837: target/arm: kvm: Inject events at the last stage of sync (2020-03-12 16:31:10 +0000) ---------------------------------------------------------------- target-arm queue: * Fix various bugs that might result in an assert() due to incorrect hflags for M-profile CPUs * Fix Aspeed SMC Controller user-mode select handling * Report correct (with-tag) address in fault address register when TBI is enabled * cubieboard: make sure SOC object isn't leaked * fsl-imx25: Wire up eSDHC controllers * fsl-imx25: Wire up USB controllers * New board model: orangepi-pc (OrangePi PC) * ARM/KVM: if user doesn't select GIC version and the host kernel can only provide GICv3, use that, rather than defaulting to "fail because GICv2 isn't possible" * kvm: Only do KVM_SET_VCPU_EVENTS at the last stage of sync ---------------------------------------------------------------- Beata Michalska (1): target/arm: kvm: Inject events at the last stage of sync Cédric Le Goater (2): aspeed/smc: Add some tracing aspeed/smc: Fix User mode select/unselect scheme Eric Auger (6): hw/arm/virt: Document 'max' value in gic-version property description hw/arm/virt: Introduce VirtGICType enum type hw/arm/virt: Introduce finalize_gic_version() target/arm/kvm: Let kvm_arm_vgic_probe() return a bitmap hw/arm/virt: kvm: Restructure finalize_gic_version() hw/arm/virt: kvm: allow gicv3 by default if v2 cannot work Guenter Roeck (2): hw/arm/fsl-imx25: Wire up eSDHC controllers hw/arm/fsl-imx25: Wire up USB controllers Igor Mammedov (1): hw/arm/cubieboard: make sure SOC object isn't leaked Niek Linnenbank (13): hw/arm: add Allwinner H3 System-on-Chip hw/arm: add Xunlong Orange Pi PC machine hw/arm/allwinner-h3: add Clock Control Unit hw/arm/allwinner-h3: add USB host controller hw/arm/allwinner-h3: add System Control module hw/arm/allwinner: add CPU Configuration module hw/arm/allwinner: add Security Identifier device hw/arm/allwinner: add SD/MMC host controller hw/arm/allwinner-h3: add EMAC ethernet device hw/arm/allwinner-h3: add Boot ROM support hw/arm/allwinner-h3: add SDRAM controller device hw/arm/allwinner: add RTC device support docs: add Orange Pi PC document Peter Maydell (4): hw/intc/armv7m_nvic: Rebuild hflags on reset target/arm: Update hflags in trans_CPS_v7m() target/arm: Recalculate hflags correctly after writes to CONTROL target/arm: Fix some comment typos Philippe Mathieu-Daudé (5): tests/boot_linux_console: Add a quick test for the OrangePi PC board tests/boot_linux_console: Add initrd test for the Orange Pi PC board tests/boot_linux_console: Add a SD card test for the OrangePi PC board tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC Richard Henderson (2): target/arm: Check addresses for disabled regimes target/arm: Disable clean_data_tbi for system mode Makefile.objs | 1 + hw/arm/Makefile.objs | 1 + hw/misc/Makefile.objs | 5 + hw/net/Makefile.objs | 1 + hw/rtc/Makefile.objs | 1 + hw/sd/Makefile.objs | 1 + hw/usb/hcd-ehci.h | 1 + include/hw/arm/allwinner-a10.h | 4 + include/hw/arm/allwinner-h3.h | 161 ++++++ include/hw/arm/fsl-imx25.h | 18 + include/hw/arm/virt.h | 12 +- include/hw/misc/allwinner-cpucfg.h | 52 ++ include/hw/misc/allwinner-h3-ccu.h | 66 +++ include/hw/misc/allwinner-h3-dramc.h | 106 ++++ include/hw/misc/allwinner-h3-sysctrl.h | 67 +++ include/hw/misc/allwinner-sid.h | 60 +++ include/hw/net/allwinner-sun8i-emac.h | 99 ++++ include/hw/rtc/allwinner-rtc.h | 134 +++++ include/hw/sd/allwinner-sdhost.h | 135 +++++ target/arm/helper.h | 1 + target/arm/kvm_arm.h | 3 + hw/arm/allwinner-a10.c | 19 + hw/arm/allwinner-h3.c | 465 ++++++++++++++++++ hw/arm/cubieboard.c | 18 + hw/arm/fsl-imx25.c | 56 +++ hw/arm/imx25_pdk.c | 16 + hw/arm/orangepi.c | 130 +++++ hw/arm/virt.c | 145 ++++-- hw/intc/armv7m_nvic.c | 6 + hw/misc/allwinner-cpucfg.c | 282 +++++++++++ hw/misc/allwinner-h3-ccu.c | 242 +++++++++ hw/misc/allwinner-h3-dramc.c | 358 ++++++++++++++ hw/misc/allwinner-h3-sysctrl.c | 140 ++++++ hw/misc/allwinner-sid.c | 168 +++++++ hw/net/allwinner-sun8i-emac.c | 871 +++++++++++++++++++++++++++++++++ hw/rtc/allwinner-rtc.c | 411 ++++++++++++++++ hw/sd/allwinner-sdhost.c | 854 ++++++++++++++++++++++++++++++++ hw/ssi/aspeed_smc.c | 56 ++- hw/usb/hcd-ehci-sysbus.c | 17 + target/arm/helper.c | 49 +- target/arm/kvm.c | 14 +- target/arm/kvm32.c | 15 +- target/arm/kvm64.c | 15 +- target/arm/translate-a64.c | 11 + target/arm/translate.c | 14 +- MAINTAINERS | 9 + default-configs/arm-softmmu.mak | 1 + docs/system/arm/orangepi.rst | 253 ++++++++++ docs/system/target-arm.rst | 2 + hw/arm/Kconfig | 12 + hw/misc/trace-events | 19 + hw/net/Kconfig | 3 + hw/net/trace-events | 10 + hw/rtc/trace-events | 4 + hw/sd/trace-events | 7 + hw/ssi/trace-events | 10 + tests/acceptance/boot_linux_console.py | 230 +++++++++ 57 files changed, 5787 insertions(+), 74 deletions(-) create mode 100644 include/hw/arm/allwinner-h3.h create mode 100644 include/hw/misc/allwinner-cpucfg.h create mode 100644 include/hw/misc/allwinner-h3-ccu.h create mode 100644 include/hw/misc/allwinner-h3-dramc.h create mode 100644 include/hw/misc/allwinner-h3-sysctrl.h create mode 100644 include/hw/misc/allwinner-sid.h create mode 100644 include/hw/net/allwinner-sun8i-emac.h create mode 100644 include/hw/rtc/allwinner-rtc.h create mode 100644 include/hw/sd/allwinner-sdhost.h create mode 100644 hw/arm/allwinner-h3.c create mode 100644 hw/arm/orangepi.c create mode 100644 hw/misc/allwinner-cpucfg.c create mode 100644 hw/misc/allwinner-h3-ccu.c create mode 100644 hw/misc/allwinner-h3-dramc.c create mode 100644 hw/misc/allwinner-h3-sysctrl.c create mode 100644 hw/misc/allwinner-sid.c create mode 100644 hw/net/allwinner-sun8i-emac.c create mode 100644 hw/rtc/allwinner-rtc.c create mode 100644 hw/sd/allwinner-sdhost.c create mode 100644 docs/system/arm/orangepi.rst create mode 100644 hw/ssi/trace-events Some of an M-profile CPU's cached hflags state depends on state that's in our NVIC object. We already do an hflags rebuild when the NVIC registers are written, but we also need to do this on NVIC reset, because there's no guarantee that this will happen before the CPU reset. This fixes an assertion due to mismatched hflags which happens if the CPU is reset from inside a HardFault handler. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200303174950.3298-2-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->itns[i] = true; } } + + /* + * We updated state that affects the CPU's MMUidx and thus its hflags; + * and we can't guarantee that we run before the CPU reset function. + */ + arm_rebuild_hflags(&s->cpu->env); } static void nvic_systick_trigger(void *opaque, int n, int level) -- 2.20.1 For M-profile CPUs, the FAULTMASK value affects the CPU's MMU index (it changes the NegPri bit). We update the hflags after calls to the v7m_msr helper in trans_MSR_v7m() but forgot to do so in trans_CPS_v7m(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200303174950.3298-3-peter.maydell@linaro.org --- target/arm/translate.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_CPS(DisasContext *s, arg_CPS *a) static bool trans_CPS_v7m(DisasContext *s, arg_CPS_v7m *a) { - TCGv_i32 tmp, addr; + TCGv_i32 tmp, addr, el; if (!arm_dc_feature(s, ARM_FEATURE_M)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_CPS_v7m(DisasContext *s, arg_CPS_v7m *a) gen_helper_v7m_msr(cpu_env, addr, tmp); tcg_temp_free_i32(addr); } + el = tcg_const_i32(s->current_el); + gen_helper_rebuild_hflags_m32(cpu_env, el); + tcg_temp_free_i32(el); tcg_temp_free_i32(tmp); gen_lookup_tb(s); return true; -- 2.20.1 A write to the CONTROL register can change our current EL (by writing to the nPRIV bit). That means that we can't assume that s->current_el is still valid in trans_MSR_v7m() when we try to rebuild the hflags. Add a new helper rebuild_hflags_m32_newel() which, like the existing rebuild_hflags_a32_newel(), recalculates the current EL from scratch, and use it in trans_MSR_v7m(). This fixes an assertion about an hflags mismatch when the guest changes privilege by writing to CONTROL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200303174950.3298-4-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 12 ++++++++++++ target/arm/translate.c | 7 +++---- 3 files changed, 16 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(msr_banked, void, env, i32, i32, i32) DEF_HELPER_2(get_user_reg, i32, env, i32) DEF_HELPER_3(set_user_reg, void, env, i32, i32) +DEF_HELPER_FLAGS_1(rebuild_hflags_m32_newel, TCG_CALL_NO_RWG, void, env) DEF_HELPER_FLAGS_2(rebuild_hflags_m32, TCG_CALL_NO_RWG, void, env, int) DEF_HELPER_FLAGS_1(rebuild_hflags_a32_newel, TCG_CALL_NO_RWG, void, env) DEF_HELPER_FLAGS_2(rebuild_hflags_a32, TCG_CALL_NO_RWG, void, env, int) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_rebuild_hflags(CPUARMState *env) env->hflags = rebuild_hflags_internal(env); } +/* + * If we have triggered a EL state change we can't rely on the + * translator having passed it to us, we need to recompute. + */ +void HELPER(rebuild_hflags_m32_newel)(CPUARMState *env) +{ + int el = arm_current_el(env); + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); + env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx); +} + void HELPER(rebuild_hflags_m32)(CPUARMState *env, int el) { int fp_el = fp_exception_el(env, el); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_MRS_v7m(DisasContext *s, arg_MRS_v7m *a) static bool trans_MSR_v7m(DisasContext *s, arg_MSR_v7m *a) { - TCGv_i32 addr, reg, el; + TCGv_i32 addr, reg; if (!arm_dc_feature(s, ARM_FEATURE_M)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_MSR_v7m(DisasContext *s, arg_MSR_v7m *a) gen_helper_v7m_msr(cpu_env, addr, reg); tcg_temp_free_i32(addr); tcg_temp_free_i32(reg); - el = tcg_const_i32(s->current_el); - gen_helper_rebuild_hflags_m32(cpu_env, el); - tcg_temp_free_i32(el); + /* If we wrote to CONTROL, the EL might have changed */ + gen_helper_rebuild_hflags_m32_newel(cpu_env); gen_lookup_tb(s); return true; } -- 2.20.1 Fix a couple of comment typos. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200303174950.3298-5-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- target/arm/translate.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(rebuild_hflags_m32)(CPUARMState *env, int el) /* * If we have triggered a EL state change we can't rely on the - * translator having passed it too us, we need to recompute. + * translator having passed it to us, we need to recompute. */ void HELPER(rebuild_hflags_a32_newel)(CPUARMState *env) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_coproc_insn(DisasContext *s, uint32_t insn) if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { /* - * A write to any coprocessor regiser that ends a TB + * A write to any coprocessor register that ends a TB * must rebuild the hflags for the next TB. */ TCGv_i32 tcg_el = tcg_const_i32(s->current_el); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200206112645.21275-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- Makefile.objs | 1 + hw/ssi/aspeed_smc.c | 17 +++++++++++++++++ hw/ssi/trace-events | 9 +++++++++ 3 files changed, 27 insertions(+) create mode 100644 hw/ssi/trace-events diff --git a/Makefile.objs b/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/Makefile.objs +++ b/Makefile.objs @@ -XXX,XX +XXX,XX @@ trace-events-subdirs += hw/scsi trace-events-subdirs += hw/sd trace-events-subdirs += hw/sparc trace-events-subdirs += hw/sparc64 +trace-events-subdirs += hw/ssi trace-events-subdirs += hw/timer trace-events-subdirs += hw/tpm trace-events-subdirs += hw/usb diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "exec/address-spaces.h" #include "qemu/units.h" +#include "trace.h" #include "hw/irq.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, s->ctrl->reg_to_segment(s, new, &seg); + trace_aspeed_smc_flash_set_segment(cs, new, seg.addr, seg.addr + seg.size); + /* The start address of CS0 is read-only */ if (cs == 0 && seg.addr != s->ctrl->flash_window_base) { qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size) __func__, aspeed_smc_flash_mode(fl)); } + trace_aspeed_smc_flash_read(fl->id, addr, size, ret, + aspeed_smc_flash_mode(fl)); return ret; } @@ -XXX,XX +XXX,XX @@ static bool aspeed_smc_do_snoop(AspeedSMCFlash *fl, uint64_t data, AspeedSMCState *s = fl->controller; uint8_t addr_width = aspeed_smc_flash_is_4byte(fl) ? 4 : 3; + trace_aspeed_smc_do_snoop(fl->id, s->snoop_index, s->snoop_dummies, + (uint8_t) data & 0xff); + if (s->snoop_index == SNOOP_OFF) { return false; /* Do nothing */ @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_write(void *opaque, hwaddr addr, uint64_t data, AspeedSMCState *s = fl->controller; int i; + trace_aspeed_smc_flash_write(fl->id, addr, size, data, + aspeed_smc_flash_mode(fl)); + if (!aspeed_smc_is_writable(fl)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: flash is not writable at 0x%" HWADDR_PRIx "\n", __func__, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) (s->ctrl->has_dma && addr == R_DMA_CHECKSUM) || (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) || (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->ctrl->max_slaves)) { + + trace_aspeed_smc_read(addr, size, s->regs[addr]); + return s->regs[addr]; } else { qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_dma_checksum(AspeedSMCState *s) __func__, s->regs[R_DMA_FLASH_ADDR]); return; } + trace_aspeed_smc_dma_checksum(s->regs[R_DMA_FLASH_ADDR], data); /* * When the DMA is on-going, the DMA registers are updated @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, addr >>= 2; + trace_aspeed_smc_write(addr, size, data); + if (addr == s->r_conf || (addr >= s->r_timings && addr < s->r_timings + s->ctrl->nregs_timings) || diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ +# aspeed_smc.c + +aspeed_smc_flash_set_segment(int cs, uint64_t reg, uint64_t start, uint64_t end) "CS%d segreg=0x%"PRIx64" [ 0x%"PRIx64" - 0x%"PRIx64" ]" +aspeed_smc_flash_read(int cs, uint64_t addr, uint32_t size, uint64_t data, int mode) "CS%d @0x%" PRIx64 " size %u: 0x%" PRIx64" mode:%d" +aspeed_smc_do_snoop(int cs, int index, int dummies, int data) "CS%d index:0x%x dummies:%d data:0x%x" +aspeed_smc_flash_write(int cs, uint64_t addr, uint32_t size, uint64_t data, int mode) "CS%d @0x%" PRIx64 " size %u: 0x%" PRIx64" mode:%d" +aspeed_smc_read(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 +aspeed_smc_dma_checksum(uint32_t addr, uint32_t data) "0x%08x: 0x%08x" +aspeed_smc_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The Aspeed SMC Controller can operate in different modes : Read, Fast Read, Write and User modes. When the User mode is configured, it selects automatically the SPI slave device until the CE_STOP_ACTIVE bit is set to 1. When any other modes are configured the device is unselected. The HW logic handles the chip select automatically when the flash is accessed through its AHB window. When configuring the CEx Control Register, the User mode logic to select and unselect the slave is incorrect and data corruption can be seen on machines using two chips, witherspoon and romulus. Rework the handler setting the CEx Control Register to fix this issue. Fixes: 7c1c69bca43c ("ast2400: add SMC controllers (FMC and SPI)") Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20200206112645.21275-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/aspeed_smc.c | 39 +++++++++++++++++++++++---------------- hw/ssi/trace-events | 1 + 2 files changed, 24 insertions(+), 16 deletions(-) diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static inline int aspeed_smc_flash_is_4byte(const AspeedSMCFlash *fl) } } -static inline bool aspeed_smc_is_ce_stop_active(const AspeedSMCFlash *fl) +static void aspeed_smc_flash_do_select(AspeedSMCFlash *fl, bool unselect) { - const AspeedSMCState *s = fl->controller; + AspeedSMCState *s = fl->controller; - return s->regs[s->r_ctrl0 + fl->id] & CTRL_CE_STOP_ACTIVE; + trace_aspeed_smc_flash_select(fl->id, unselect ? "un" : ""); + + qemu_set_irq(s->cs_lines[fl->id], unselect); } static void aspeed_smc_flash_select(AspeedSMCFlash *fl) { - AspeedSMCState *s = fl->controller; - - s->regs[s->r_ctrl0 + fl->id] &= ~CTRL_CE_STOP_ACTIVE; - qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl)); + aspeed_smc_flash_do_select(fl, false); } static void aspeed_smc_flash_unselect(AspeedSMCFlash *fl) { - AspeedSMCState *s = fl->controller; - - s->regs[s->r_ctrl0 + fl->id] |= CTRL_CE_STOP_ACTIVE; - qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl)); + aspeed_smc_flash_do_select(fl, true); } static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl, @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_smc_flash_ops = { }, }; -static void aspeed_smc_flash_update_cs(AspeedSMCFlash *fl) +static void aspeed_smc_flash_update_ctrl(AspeedSMCFlash *fl, uint32_t value) { AspeedSMCState *s = fl->controller; + bool unselect; - s->snoop_index = aspeed_smc_is_ce_stop_active(fl) ? SNOOP_OFF : SNOOP_START; + /* User mode selects the CS, other modes unselect */ + unselect = (value & CTRL_CMD_MODE_MASK) != CTRL_USERMODE; - qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl)); + /* A change of CTRL_CE_STOP_ACTIVE from 0 to 1, unselects the CS */ + if (!(s->regs[s->r_ctrl0 + fl->id] & CTRL_CE_STOP_ACTIVE) && + value & CTRL_CE_STOP_ACTIVE) { + unselect = true; + } + + s->regs[s->r_ctrl0 + fl->id] = value; + + s->snoop_index = unselect ? SNOOP_OFF : SNOOP_START; + + aspeed_smc_flash_do_select(fl, unselect); } static void aspeed_smc_reset(DeviceState *d) @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, s->regs[addr] = value; } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) { int cs = addr - s->r_ctrl0; - s->regs[addr] = value; - aspeed_smc_flash_update_cs(&s->flashes[cs]); + aspeed_smc_flash_update_ctrl(&s->flashes[cs], value); } else if (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) { int cs = addr - R_SEG_ADDR0; diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ aspeed_smc_flash_write(int cs, uint64_t addr, uint32_t size, uint64_t data, int aspeed_smc_read(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 aspeed_smc_dma_checksum(uint32_t addr, uint32_t data) "0x%08x: 0x%08x" aspeed_smc_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 +aspeed_smc_flash_select(int cs, const char *prefix) "CS%d %sselect" -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We fail to validate the upper bits of a virtual address on a translation disabled regime, as per AArch64.TranslateAddressS1Off. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200308012946.16303-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 35 ++++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, /* Definitely a real MMU, not an MPU */ if (regime_translation_disabled(env, mmu_idx)) { - /* MMU disabled. */ + /* + * MMU disabled. S1 addresses within aa64 translation regimes are + * still checked for bounds -- see AArch64.TranslateAddressS1Off. + */ + if (mmu_idx != ARMMMUIdx_Stage2) { + int r_el = regime_el(env, mmu_idx); + if (arm_el_is_aa64(env, r_el)) { + int pamax = arm_pamax(env_archcpu(env)); + uint64_t tcr = env->cp15.tcr_el[r_el].raw_tcr; + int addrtop, tbi; + + tbi = aa64_va_parameter_tbi(tcr, mmu_idx); + if (access_type == MMU_INST_FETCH) { + tbi &= ~aa64_va_parameter_tbid(tcr, mmu_idx); + } + tbi = (tbi >> extract64(address, 55, 1)) & 1; + addrtop = (tbi ? 55 : 63); + + if (extract64(address, pamax, addrtop - pamax + 1) != 0) { + fi->type = ARMFault_AddressSize; + fi->level = 0; + fi->stage2 = false; + return 1; + } + + /* + * When TBI is disabled, we've just validated that all of the + * bits above PAMax are zero, so logically we only need to + * clear the top byte for TBI. But it's clearer to follow + * the pseudocode set of addrdesc.paddress. + */ + address = extract64(address, 0, 52); + } + } *phys_ptr = address; *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; *page_size = TARGET_PAGE_SIZE; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We must include the tag in the FAR_ELx register when raising an addressing exception. Which means that we should not clear out the tag during translation. We cannot at present comply with this for user mode, so we retain the clean_data_tbi function for the moment, though it no longer does what it says on the tin for system mode. This function is to be replaced with MTE, so don't worry about the slight misnaming. Buglink: https://bugs.launchpad.net/qemu/+bug/1867072 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200308012946.16303-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_a64_set_pc(DisasContext *s, TCGv_i64 src) static TCGv_i64 clean_data_tbi(DisasContext *s, TCGv_i64 addr) { TCGv_i64 clean = new_tmp_a64(s); + /* + * In order to get the correct value in the FAR_ELx register, + * we must present the memory subsystem with the "dirty" address + * including the TBI. In system mode we can make this work via + * the TLB, dropping the TBI during translation. But for user-only + * mode we don't have that option, and must remove the top byte now. + */ +#ifdef CONFIG_USER_ONLY gen_top_byte_ignore(s, clean, addr, s->tbid); +#else + tcg_gen_mov_i64(clean, addr); +#endif return clean; } -- 2.20.1 From: Igor Mammedov <imammedo@redhat.com> SOC object returned by object_new() is leaked in current code. Set SOC parent explicitly to board and then unref to SOC object to make sure that refererence returned by object_new() is taken care of. The SOC object will be kept alive by its parent (machine) and will be automatically freed when MachineState is destroyed. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reported-by: Andrew Jones <drjones@redhat.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200303091254.22373-1-imammedo@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) } a10 = AW_A10(object_new(TYPE_AW_A10)); + object_property_add_child(OBJECT(machine), "soc", OBJECT(a10), + &error_abort); + object_unref(OBJECT(a10)); object_property_set_int(OBJECT(&a10->emac), 1, "phy-addr", &err); if (err != NULL) { -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> Wire up eSDHC controllers in fsl-imx25. For imx25-pdk, connect drives provided on the command line to available eSDHC controllers. This patch enables booting the imx25-pdk emulation from SD card. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200310215146.19688-2-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: made commit subject consistent with other patch] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx25.h | 9 +++++++++ hw/arm/fsl-imx25.c | 32 ++++++++++++++++++++++++++++++++ hw/arm/imx25_pdk.c | 16 ++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx25.h +++ b/include/hw/arm/fsl-imx25.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx_rngc.h" #include "hw/i2c/imx_i2c.h" #include "hw/gpio/imx_gpio.h" +#include "hw/sd/sdhci.h" #include "exec/memory.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ #define FSL_IMX25_NUM_EPITS 2 #define FSL_IMX25_NUM_I2CS 3 #define FSL_IMX25_NUM_GPIOS 4 +#define FSL_IMX25_NUM_ESDHCS 2 typedef struct FslIMX25State { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { IMXRNGCState rngc; IMXI2CState i2c[FSL_IMX25_NUM_I2CS]; IMXGPIOState gpio[FSL_IMX25_NUM_GPIOS]; + SDHCIState esdhc[FSL_IMX25_NUM_ESDHCS]; MemoryRegion rom[2]; MemoryRegion iram; MemoryRegion iram_alias; @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO3_SIZE 0x4000 #define FSL_IMX25_RNGC_ADDR 0x53FB0000 #define FSL_IMX25_RNGC_SIZE 0x4000 +#define FSL_IMX25_ESDHC1_ADDR 0x53FB4000 +#define FSL_IMX25_ESDHC1_SIZE 0x4000 +#define FSL_IMX25_ESDHC2_ADDR 0x53FB8000 +#define FSL_IMX25_ESDHC2_SIZE 0x4000 #define FSL_IMX25_GPIO1_ADDR 0x53FCC000 #define FSL_IMX25_GPIO1_SIZE 0x4000 #define FSL_IMX25_GPIO2_ADDR 0x53FD0000 @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO2_IRQ 51 #define FSL_IMX25_GPIO3_IRQ 16 #define FSL_IMX25_GPIO4_IRQ 23 +#define FSL_IMX25_ESDHC1_IRQ 9 +#define FSL_IMX25_ESDHC2_IRQ 8 #endif /* FSL_IMX25_H */ diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx25.c +++ b/hw/arm/fsl-imx25.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "chardev/char.h" +#define IMX25_ESDHC_CAPABILITIES 0x07e20000 + static void fsl_imx25_init(Object *obj) { FslIMX25State *s = FSL_IMX25(obj); @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_init(Object *obj) sysbus_init_child_obj(obj, "gpio[*]", &s->gpio[i], sizeof(s->gpio[i]), TYPE_IMX_GPIO); } + + for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) { + sysbus_init_child_obj(obj, "sdhc[*]", &s->esdhc[i], sizeof(s->esdhc[i]), + TYPE_IMX_USDHC); + } } static void fsl_imx25_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_realize(DeviceState *dev, Error **errp) gpio_table[i].irq)); } + /* Initialize all SDHC */ + for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } esdhc_table[FSL_IMX25_NUM_ESDHCS] = { + { FSL_IMX25_ESDHC1_ADDR, FSL_IMX25_ESDHC1_IRQ }, + { FSL_IMX25_ESDHC2_ADDR, FSL_IMX25_ESDHC2_IRQ }, + }; + + object_property_set_uint(OBJECT(&s->esdhc[i]), 2, "sd-spec-version", + &err); + object_property_set_uint(OBJECT(&s->esdhc[i]), IMX25_ESDHC_CAPABILITIES, + "capareg", &err); + object_property_set_bool(OBJECT(&s->esdhc[i]), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->esdhc[i]), 0, esdhc_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->esdhc[i]), 0, + qdev_get_gpio_in(DEVICE(&s->avic), + esdhc_table[i].irq)); + } + /* initialize 2 x 16 KB ROM */ memory_region_init_rom(&s->rom[0], NULL, "imx25.rom0", FSL_IMX25_ROM0_SIZE, &err); diff --git a/hw/arm/imx25_pdk.c b/hw/arm/imx25_pdk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx25_pdk.c +++ b/hw/arm/imx25_pdk.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "cpu.h" +#include "hw/qdev-properties.h" #include "hw/arm/fsl-imx25.h" #include "hw/boards.h" #include "qemu/error-report.h" @@ -XXX,XX +XXX,XX @@ static void imx25_pdk_init(MachineState *machine) imx25_pdk_binfo.board_id = 1771, imx25_pdk_binfo.nb_cpus = 1; + for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) { + BusState *bus; + DeviceState *carddev; + DriveInfo *di; + BlockBackend *blk; + + di = drive_get_next(IF_SD); + blk = di ? blk_by_legacy_dinfo(di) : NULL; + bus = qdev_get_child_bus(DEVICE(&s->soc.esdhc[i]), "sd-bus"); + carddev = qdev_create(bus, TYPE_SD_CARD); + qdev_prop_set_drive(carddev, "drive", blk, &error_fatal); + object_property_set_bool(OBJECT(carddev), true, + "realized", &error_fatal); + } + /* * We test explicitly for qtest here as it is not done (yet?) in * arm_load_kernel(). Without this the "make check" command would -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> i.MX25 supports two USB controllers. Let's wire them up. With this patch, imx25-pdk can boot from both USB ports. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200310215146.19688-3-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx25.h | 9 +++++++++ hw/arm/fsl-imx25.c | 24 ++++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx25.h +++ b/include/hw/arm/fsl-imx25.h @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/imx_i2c.h" #include "hw/gpio/imx_gpio.h" #include "hw/sd/sdhci.h" +#include "hw/usb/chipidea.h" #include "exec/memory.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ #define FSL_IMX25_NUM_I2CS 3 #define FSL_IMX25_NUM_GPIOS 4 #define FSL_IMX25_NUM_ESDHCS 2 +#define FSL_IMX25_NUM_USBS 2 typedef struct FslIMX25State { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { IMXI2CState i2c[FSL_IMX25_NUM_I2CS]; IMXGPIOState gpio[FSL_IMX25_NUM_GPIOS]; SDHCIState esdhc[FSL_IMX25_NUM_ESDHCS]; + ChipideaState usb[FSL_IMX25_NUM_USBS]; MemoryRegion rom[2]; MemoryRegion iram; MemoryRegion iram_alias; @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO1_SIZE 0x4000 #define FSL_IMX25_GPIO2_ADDR 0x53FD0000 #define FSL_IMX25_GPIO2_SIZE 0x4000 +#define FSL_IMX25_USB1_ADDR 0x53FF4000 +#define FSL_IMX25_USB1_SIZE 0x0200 +#define FSL_IMX25_USB2_ADDR 0x53FF4400 +#define FSL_IMX25_USB2_SIZE 0x0200 #define FSL_IMX25_AVIC_ADDR 0x68000000 #define FSL_IMX25_AVIC_SIZE 0x4000 #define FSL_IMX25_IRAM_ADDR 0x78000000 @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO4_IRQ 23 #define FSL_IMX25_ESDHC1_IRQ 9 #define FSL_IMX25_ESDHC2_IRQ 8 +#define FSL_IMX25_USB1_IRQ 37 +#define FSL_IMX25_USB2_IRQ 35 #endif /* FSL_IMX25_H */ diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx25.c +++ b/hw/arm/fsl-imx25.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_init(Object *obj) sysbus_init_child_obj(obj, "sdhc[*]", &s->esdhc[i], sizeof(s->esdhc[i]), TYPE_IMX_USDHC); } + + for (i = 0; i < FSL_IMX25_NUM_USBS; i++) { + sysbus_init_child_obj(obj, "usb[*]", &s->usb[i], sizeof(s->usb[i]), + TYPE_CHIPIDEA); + } + } static void fsl_imx25_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_realize(DeviceState *dev, Error **errp) esdhc_table[i].irq)); } + /* USB */ + for (i = 0; i < FSL_IMX25_NUM_USBS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usb_table[FSL_IMX25_NUM_USBS] = { + { FSL_IMX25_USB1_ADDR, FSL_IMX25_USB1_IRQ }, + { FSL_IMX25_USB2_ADDR, FSL_IMX25_USB2_IRQ }, + }; + + object_property_set_bool(OBJECT(&s->usb[i]), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, + qdev_get_gpio_in(DEVICE(&s->avic), + usb_table[i].irq)); + } + /* initialize 2 x 16 KB ROM */ memory_region_init_rom(&s->rom[0], NULL, "imx25.rom0", FSL_IMX25_ROM0_SIZE, &err); -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Allwinner H3 is a System on Chip containing four ARM Cortex A7 processor cores. Features and specifications include DDR2/DDR3 memory, SD/MMC storage cards, 10/100/1000Mbit Ethernet, USB 2.0, HDMI and various I/O modules. This commit adds support for the Allwinner H3 System on Chip. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-2-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 106 +++++++++++ hw/arm/allwinner-h3.c | 327 ++++++++++++++++++++++++++++++++ MAINTAINERS | 7 + default-configs/arm-softmmu.mak | 1 + hw/arm/Kconfig | 8 + 6 files changed, 450 insertions(+) create mode 100644 include/hw/arm/allwinner-h3.h create mode 100644 hw/arm/allwinner-h3.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_DIGIC) += digic.o obj-$(CONFIG_OMAP) += omap1.o omap2.o obj-$(CONFIG_STRONGARM) += strongarm.o obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o +obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3.o obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o raspi.o obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o obj-$(CONFIG_STM32F405_SOC) += stm32f405_soc.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 System on Chip emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * The Allwinner H3 is a System on Chip containing four ARM Cortex A7 + * processor cores. Features and specifications include DDR2/DDR3 memory, + * SD/MMC storage cards, 10/100/1000Mbit Ethernet, USB 2.0, HDMI and + * various I/O modules. + * + * This implementation is based on the following datasheet: + * + * https://linux-sunxi.org/File:Allwinner_H3_Datasheet_V1.2.pdf + * + * The latest datasheet and more info can be found on the Linux Sunxi wiki: + * + * https://linux-sunxi.org/H3 + */ + +#ifndef HW_ARM_ALLWINNER_H3_H +#define HW_ARM_ALLWINNER_H3_H + +#include "qom/object.h" +#include "hw/arm/boot.h" +#include "hw/timer/allwinner-a10-pit.h" +#include "hw/intc/arm_gic.h" +#include "target/arm/cpu.h" + +/** + * Allwinner H3 device list + * + * This enumeration is can be used refer to a particular device in the + * Allwinner H3 SoC. For example, the physical memory base address for + * each device can be found in the AwH3State object in the memmap member + * using the device enum value as index. + * + * @see AwH3State + */ +enum { + AW_H3_SRAM_A1, + AW_H3_SRAM_A2, + AW_H3_SRAM_C, + AW_H3_PIT, + AW_H3_UART0, + AW_H3_UART1, + AW_H3_UART2, + AW_H3_UART3, + AW_H3_GIC_DIST, + AW_H3_GIC_CPU, + AW_H3_GIC_HYP, + AW_H3_GIC_VCPU, + AW_H3_SDRAM +}; + +/** Total number of CPU cores in the H3 SoC */ +#define AW_H3_NUM_CPUS (4) + +/** + * Allwinner H3 object model + * @{ + */ + +/** Object type for the Allwinner H3 SoC */ +#define TYPE_AW_H3 "allwinner-h3" + +/** Convert input object to Allwinner H3 state object */ +#define AW_H3(obj) OBJECT_CHECK(AwH3State, (obj), TYPE_AW_H3) + +/** @} */ + +/** + * Allwinner H3 object + * + * This struct contains the state of all the devices + * which are currently emulated by the H3 SoC code. + */ +typedef struct AwH3State { + /*< private >*/ + DeviceState parent_obj; + /*< public >*/ + + ARMCPU cpus[AW_H3_NUM_CPUS]; + const hwaddr *memmap; + AwA10PITState timer; + GICState gic; + MemoryRegion sram_a1; + MemoryRegion sram_a2; + MemoryRegion sram_c; +} AwH3State; + +#endif /* HW_ARM_ALLWINNER_H3_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 System on Chip emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "exec/address-spaces.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "hw/qdev-core.h" +#include "cpu.h" +#include "hw/sysbus.h" +#include "hw/char/serial.h" +#include "hw/misc/unimp.h" +#include "sysemu/sysemu.h" +#include "hw/arm/allwinner-h3.h" + +/* Memory map */ +const hwaddr allwinner_h3_memmap[] = { + [AW_H3_SRAM_A1] = 0x00000000, + [AW_H3_SRAM_A2] = 0x00044000, + [AW_H3_SRAM_C] = 0x00010000, + [AW_H3_PIT] = 0x01c20c00, + [AW_H3_UART0] = 0x01c28000, + [AW_H3_UART1] = 0x01c28400, + [AW_H3_UART2] = 0x01c28800, + [AW_H3_UART3] = 0x01c28c00, + [AW_H3_GIC_DIST] = 0x01c81000, + [AW_H3_GIC_CPU] = 0x01c82000, + [AW_H3_GIC_HYP] = 0x01c84000, + [AW_H3_GIC_VCPU] = 0x01c86000, + [AW_H3_SDRAM] = 0x40000000 +}; + +/* List of unimplemented devices */ +struct AwH3Unimplemented { + const char *device_name; + hwaddr base; + hwaddr size; +} unimplemented[] = { + { "d-engine", 0x01000000, 4 * MiB }, + { "d-inter", 0x01400000, 128 * KiB }, + { "syscon", 0x01c00000, 4 * KiB }, + { "dma", 0x01c02000, 4 * KiB }, + { "nfdc", 0x01c03000, 4 * KiB }, + { "ts", 0x01c06000, 4 * KiB }, + { "keymem", 0x01c0b000, 4 * KiB }, + { "lcd0", 0x01c0c000, 4 * KiB }, + { "lcd1", 0x01c0d000, 4 * KiB }, + { "ve", 0x01c0e000, 4 * KiB }, + { "mmc0", 0x01c0f000, 4 * KiB }, + { "mmc1", 0x01c10000, 4 * KiB }, + { "mmc2", 0x01c11000, 4 * KiB }, + { "sid", 0x01c14000, 1 * KiB }, + { "crypto", 0x01c15000, 4 * KiB }, + { "msgbox", 0x01c17000, 4 * KiB }, + { "spinlock", 0x01c18000, 4 * KiB }, + { "usb0-otg", 0x01c19000, 4 * KiB }, + { "usb0-phy", 0x01c1a000, 4 * KiB }, + { "usb1-phy", 0x01c1b000, 4 * KiB }, + { "usb2-phy", 0x01c1c000, 4 * KiB }, + { "usb3-phy", 0x01c1d000, 4 * KiB }, + { "smc", 0x01c1e000, 4 * KiB }, + { "ccu", 0x01c20000, 1 * KiB }, + { "pio", 0x01c20800, 1 * KiB }, + { "owa", 0x01c21000, 1 * KiB }, + { "pwm", 0x01c21400, 1 * KiB }, + { "keyadc", 0x01c21800, 1 * KiB }, + { "pcm0", 0x01c22000, 1 * KiB }, + { "pcm1", 0x01c22400, 1 * KiB }, + { "pcm2", 0x01c22800, 1 * KiB }, + { "audio", 0x01c22c00, 2 * KiB }, + { "smta", 0x01c23400, 1 * KiB }, + { "ths", 0x01c25000, 1 * KiB }, + { "uart0", 0x01c28000, 1 * KiB }, + { "uart1", 0x01c28400, 1 * KiB }, + { "uart2", 0x01c28800, 1 * KiB }, + { "uart3", 0x01c28c00, 1 * KiB }, + { "twi0", 0x01c2ac00, 1 * KiB }, + { "twi1", 0x01c2b000, 1 * KiB }, + { "twi2", 0x01c2b400, 1 * KiB }, + { "scr", 0x01c2c400, 1 * KiB }, + { "emac", 0x01c30000, 64 * KiB }, + { "gpu", 0x01c40000, 64 * KiB }, + { "hstmr", 0x01c60000, 4 * KiB }, + { "dramcom", 0x01c62000, 4 * KiB }, + { "dramctl0", 0x01c63000, 4 * KiB }, + { "dramphy0", 0x01c65000, 4 * KiB }, + { "spi0", 0x01c68000, 4 * KiB }, + { "spi1", 0x01c69000, 4 * KiB }, + { "csi", 0x01cb0000, 320 * KiB }, + { "tve", 0x01e00000, 64 * KiB }, + { "hdmi", 0x01ee0000, 128 * KiB }, + { "rtc", 0x01f00000, 1 * KiB }, + { "r_timer", 0x01f00800, 1 * KiB }, + { "r_intc", 0x01f00c00, 1 * KiB }, + { "r_wdog", 0x01f01000, 1 * KiB }, + { "r_prcm", 0x01f01400, 1 * KiB }, + { "r_twd", 0x01f01800, 1 * KiB }, + { "r_cpucfg", 0x01f01c00, 1 * KiB }, + { "r_cir-rx", 0x01f02000, 1 * KiB }, + { "r_twi", 0x01f02400, 1 * KiB }, + { "r_uart", 0x01f02800, 1 * KiB }, + { "r_pio", 0x01f02c00, 1 * KiB }, + { "r_pwm", 0x01f03800, 1 * KiB }, + { "core-dbg", 0x3f500000, 128 * KiB }, + { "tsgen-ro", 0x3f506000, 4 * KiB }, + { "tsgen-ctl", 0x3f507000, 4 * KiB }, + { "ddr-mem", 0x40000000, 2 * GiB }, + { "n-brom", 0xffff0000, 32 * KiB }, + { "s-brom", 0xffff0000, 64 * KiB } +}; + +/* Per Processor Interrupts */ +enum { + AW_H3_GIC_PPI_MAINT = 9, + AW_H3_GIC_PPI_HYPTIMER = 10, + AW_H3_GIC_PPI_VIRTTIMER = 11, + AW_H3_GIC_PPI_SECTIMER = 13, + AW_H3_GIC_PPI_PHYSTIMER = 14 +}; + +/* Shared Processor Interrupts */ +enum { + AW_H3_GIC_SPI_UART0 = 0, + AW_H3_GIC_SPI_UART1 = 1, + AW_H3_GIC_SPI_UART2 = 2, + AW_H3_GIC_SPI_UART3 = 3, + AW_H3_GIC_SPI_TIMER0 = 18, + AW_H3_GIC_SPI_TIMER1 = 19, +}; + +/* Allwinner H3 general constants */ +enum { + AW_H3_GIC_NUM_SPI = 128 +}; + +static void allwinner_h3_init(Object *obj) +{ + AwH3State *s = AW_H3(obj); + + s->memmap = allwinner_h3_memmap; + + for (int i = 0; i < AW_H3_NUM_CPUS; i++) { + object_initialize_child(obj, "cpu[*]", &s->cpus[i], sizeof(s->cpus[i]), + ARM_CPU_TYPE_NAME("cortex-a7"), + &error_abort, NULL); + } + + sysbus_init_child_obj(obj, "gic", &s->gic, sizeof(s->gic), + TYPE_ARM_GIC); + + sysbus_init_child_obj(obj, "timer", &s->timer, sizeof(s->timer), + TYPE_AW_A10_PIT); + object_property_add_alias(obj, "clk0-freq", OBJECT(&s->timer), + "clk0-freq", &error_abort); + object_property_add_alias(obj, "clk1-freq", OBJECT(&s->timer), + "clk1-freq", &error_abort); +} + +static void allwinner_h3_realize(DeviceState *dev, Error **errp) +{ + AwH3State *s = AW_H3(dev); + unsigned i; + + /* CPUs */ + for (i = 0; i < AW_H3_NUM_CPUS; i++) { + + /* Provide Power State Coordination Interface */ + qdev_prop_set_int32(DEVICE(&s->cpus[i]), "psci-conduit", + QEMU_PSCI_CONDUIT_HVC); + + /* Disable secondary CPUs */ + qdev_prop_set_bit(DEVICE(&s->cpus[i]), "start-powered-off", + i > 0); + + /* All exception levels required */ + qdev_prop_set_bit(DEVICE(&s->cpus[i]), "has_el3", true); + qdev_prop_set_bit(DEVICE(&s->cpus[i]), "has_el2", true); + + /* Mark realized */ + qdev_init_nofail(DEVICE(&s->cpus[i])); + } + + /* Generic Interrupt Controller */ + qdev_prop_set_uint32(DEVICE(&s->gic), "num-irq", AW_H3_GIC_NUM_SPI + + GIC_INTERNAL); + qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 2); + qdev_prop_set_uint32(DEVICE(&s->gic), "num-cpu", AW_H3_NUM_CPUS); + qdev_prop_set_bit(DEVICE(&s->gic), "has-security-extensions", false); + qdev_prop_set_bit(DEVICE(&s->gic), "has-virtualization-extensions", true); + qdev_init_nofail(DEVICE(&s->gic)); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 0, s->memmap[AW_H3_GIC_DIST]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1, s->memmap[AW_H3_GIC_CPU]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 2, s->memmap[AW_H3_GIC_HYP]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 3, s->memmap[AW_H3_GIC_VCPU]); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < AW_H3_NUM_CPUS; i++) { + DeviceState *cpudev = DEVICE(&s->cpus[i]); + int ppibase = AW_H3_GIC_NUM_SPI + i * GIC_INTERNAL + GIC_NR_SGIS; + int irq; + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs used for this board. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = AW_H3_GIC_PPI_PHYSTIMER, + [GTIMER_VIRT] = AW_H3_GIC_PPI_VIRTTIMER, + [GTIMER_HYP] = AW_H3_GIC_PPI_HYPTIMER, + [GTIMER_SEC] = AW_H3_GIC_PPI_SECTIMER, + }; + + /* Connect CPU timer outputs to GIC PPI inputs */ + for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { + qdev_connect_gpio_out(cpudev, irq, + qdev_get_gpio_in(DEVICE(&s->gic), + ppibase + timer_irq[irq])); + } + + /* Connect GIC outputs to CPU interrupt inputs */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + AW_H3_NUM_CPUS, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + (2 * AW_H3_NUM_CPUS), + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + (3 * AW_H3_NUM_CPUS), + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + /* GIC maintenance signal */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + (4 * AW_H3_NUM_CPUS), + qdev_get_gpio_in(DEVICE(&s->gic), + ppibase + AW_H3_GIC_PPI_MAINT)); + } + + /* Timer */ + qdev_init_nofail(DEVICE(&s->timer)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->timer), 0, s->memmap[AW_H3_PIT]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TIMER0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer), 1, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TIMER1)); + + /* SRAM */ + memory_region_init_ram(&s->sram_a1, OBJECT(dev), "sram A1", + 64 * KiB, &error_abort); + memory_region_init_ram(&s->sram_a2, OBJECT(dev), "sram A2", + 32 * KiB, &error_abort); + memory_region_init_ram(&s->sram_c, OBJECT(dev), "sram C", + 44 * KiB, &error_abort); + memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_SRAM_A1], + &s->sram_a1); + memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_SRAM_A2], + &s->sram_a2); + memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_SRAM_C], + &s->sram_c); + + /* UART0. For future clocktree API: All UARTS are connected to APB2_CLK. */ + serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART0], 2, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART0), + 115200, serial_hd(0), DEVICE_NATIVE_ENDIAN); + /* UART1 */ + serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART1], 2, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART1), + 115200, serial_hd(1), DEVICE_NATIVE_ENDIAN); + /* UART2 */ + serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART2], 2, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART2), + 115200, serial_hd(2), DEVICE_NATIVE_ENDIAN); + /* UART3 */ + serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART3], 2, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART3), + 115200, serial_hd(3), DEVICE_NATIVE_ENDIAN); + + /* Unimplemented devices */ + for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { + create_unimplemented_device(unimplemented[i].device_name, + unimplemented[i].base, + unimplemented[i].size); + } +} + +static void allwinner_h3_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = allwinner_h3_realize; + /* Reason: uses serial_hd() in realize function */ + dc->user_creatable = false; +} + +static const TypeInfo allwinner_h3_type_info = { + .name = TYPE_AW_H3, + .parent = TYPE_DEVICE, + .instance_size = sizeof(AwH3State), + .instance_init = allwinner_h3_init, + .class_init = allwinner_h3_class_init, +}; + +static void allwinner_h3_register_types(void) +{ + type_register_static(&allwinner_h3_type_info); +} + +type_init(allwinner_h3_register_types) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/*/allwinner* F: include/hw/*/allwinner* F: hw/arm/cubieboard.c +Allwinner-h3 +M: Niek Linnenbank <nieklinnenbank@gmail.com> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/*/allwinner-h3* +F: include/hw/*/allwinner-h3* + ARM PrimeCell and CMSDK devices M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_FSL_IMX25=y CONFIG_FSL_IMX7=y CONFIG_FSL_IMX6UL=y CONFIG_SEMIHOSTING=y +CONFIG_ALLWINNER_H3=y diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select SERIAL select UNIMP +config ALLWINNER_H3 + bool + select ALLWINNER_A10_PIT + select SERIAL + select ARM_TIMER + select ARM_GIC + select UNIMP + config RASPI bool select FRAMEBUFFER -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Xunlong Orange Pi PC is an Allwinner H3 System on Chip based embedded computer with mainline support in both U-Boot and Linux. The board comes with a Quad Core Cortex A7 @ 1.3GHz, 1GiB RAM, 100Mbit ethernet, USB, SD/MMC, USB, HDMI and various other I/O. This commit add support for the Xunlong Orange Pi PC machine. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: KONRAD Frederic <frederic.konrad@adacore.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200311221854.30370-3-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 2 +- hw/arm/orangepi.c | 92 ++++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 94 insertions(+), 1 deletion(-) create mode 100644 hw/arm/orangepi.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_DIGIC) += digic.o obj-$(CONFIG_OMAP) += omap1.o omap2.o obj-$(CONFIG_STRONGARM) += strongarm.o obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o -obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3.o +obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3.o orangepi.o obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o raspi.o obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o obj-$(CONFIG_STM32F405_SOC) += stm32f405_soc.o diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ +/* + * Orange Pi emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "exec/address-spaces.h" +#include "qapi/error.h" +#include "cpu.h" +#include "hw/sysbus.h" +#include "hw/boards.h" +#include "hw/qdev-properties.h" +#include "hw/arm/allwinner-h3.h" +#include "sysemu/sysemu.h" + +static struct arm_boot_info orangepi_binfo = { + .nb_cpus = AW_H3_NUM_CPUS, +}; + +static void orangepi_init(MachineState *machine) +{ + AwH3State *h3; + + /* BIOS is not supported by this board */ + if (bios_name) { + error_report("BIOS not supported for this machine"); + exit(1); + } + + /* This board has fixed size RAM */ + if (machine->ram_size != 1 * GiB) { + error_report("This machine can only be used with 1GiB of RAM"); + exit(1); + } + + /* Only allow Cortex-A7 for this board */ + if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a7")) != 0) { + error_report("This board can only be used with cortex-a7 CPU"); + exit(1); + } + + h3 = AW_H3(object_new(TYPE_AW_H3)); + object_property_add_child(OBJECT(machine), "soc", OBJECT(h3), + &error_abort); + object_unref(OBJECT(h3)); + + /* Setup timer properties */ + object_property_set_int(OBJECT(h3), 32768, "clk0-freq", + &error_abort); + object_property_set_int(OBJECT(h3), 24 * 1000 * 1000, "clk1-freq", + &error_abort); + + /* Mark H3 object realized */ + object_property_set_bool(OBJECT(h3), true, "realized", &error_abort); + + /* SDRAM */ + memory_region_add_subregion(get_system_memory(), h3->memmap[AW_H3_SDRAM], + machine->ram); + + orangepi_binfo.loader_start = h3->memmap[AW_H3_SDRAM]; + orangepi_binfo.ram_size = machine->ram_size; + arm_load_kernel(ARM_CPU(first_cpu), machine, &orangepi_binfo); +} + +static void orangepi_machine_init(MachineClass *mc) +{ + mc->desc = "Orange Pi PC"; + mc->init = orangepi_init; + mc->min_cpus = AW_H3_NUM_CPUS; + mc->max_cpus = AW_H3_NUM_CPUS; + mc->default_cpus = AW_H3_NUM_CPUS; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); + mc->default_ram_size = 1 * GiB; + mc->default_ram_id = "orangepi.ram"; +} + +DEFINE_MACHINE("orangepi-pc", orangepi_machine_init) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Maintained F: hw/*/allwinner-h3* F: include/hw/*/allwinner-h3* +F: hw/arm/orangepi.c ARM PrimeCell and CMSDK devices M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Clock Control Unit is responsible for clock signal generation, configuration and distribution in the Allwinner H3 System on Chip. This commit adds support for the Clock Control Unit which emulates a simple read/write register interface. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-4-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 3 + include/hw/misc/allwinner-h3-ccu.h | 66 ++++++++ hw/arm/allwinner-h3.c | 9 +- hw/misc/allwinner-h3-ccu.c | 242 +++++++++++++++++++++++++++++ 5 files changed, 320 insertions(+), 1 deletion(-) create mode 100644 include/hw/misc/allwinner-h3-ccu.h create mode 100644 hw/misc/allwinner-h3-ccu.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_MACIO) += macio/ common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o common-obj-$(CONFIG_NSERIES) += cbus.o common-obj-$(CONFIG_ECCMEMCTL) += eccmemctl.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/arm/boot.h" #include "hw/timer/allwinner-a10-pit.h" #include "hw/intc/arm_gic.h" +#include "hw/misc/allwinner-h3-ccu.h" #include "target/arm/cpu.h" /** @@ -XXX,XX +XXX,XX @@ enum { AW_H3_SRAM_A1, AW_H3_SRAM_A2, AW_H3_SRAM_C, + AW_H3_CCU, AW_H3_PIT, AW_H3_UART0, AW_H3_UART1, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { ARMCPU cpus[AW_H3_NUM_CPUS]; const hwaddr *memmap; AwA10PITState timer; + AwH3ClockCtlState ccu; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/misc/allwinner-h3-ccu.h b/include/hw/misc/allwinner-h3-ccu.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-h3-ccu.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 Clock Control Unit emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_H3_CCU_H +#define HW_MISC_ALLWINNER_H3_CCU_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by CCU device */ +#define AW_H3_CCU_IOSIZE (0x400) + +/** Total number of known registers */ +#define AW_H3_CCU_REGS_NUM (AW_H3_CCU_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_H3_CCU "allwinner-h3-ccu" +#define AW_H3_CCU(obj) \ + OBJECT_CHECK(AwH3ClockCtlState, (obj), TYPE_AW_H3_CCU) + +/** @} */ + +/** + * Allwinner H3 CCU object instance state. + */ +typedef struct AwH3ClockCtlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_H3_CCU_REGS_NUM]; + +} AwH3ClockCtlState; + +#endif /* HW_MISC_ALLWINNER_H3_CCU_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_SRAM_A1] = 0x00000000, [AW_H3_SRAM_A2] = 0x00044000, [AW_H3_SRAM_C] = 0x00010000, + [AW_H3_CCU] = 0x01c20000, [AW_H3_PIT] = 0x01c20c00, [AW_H3_UART0] = 0x01c28000, [AW_H3_UART1] = 0x01c28400, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "usb2-phy", 0x01c1c000, 4 * KiB }, { "usb3-phy", 0x01c1d000, 4 * KiB }, { "smc", 0x01c1e000, 4 * KiB }, - { "ccu", 0x01c20000, 1 * KiB }, { "pio", 0x01c20800, 1 * KiB }, { "owa", 0x01c21000, 1 * KiB }, { "pwm", 0x01c21400, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) "clk0-freq", &error_abort); object_property_add_alias(obj, "clk1-freq", OBJECT(&s->timer), "clk1-freq", &error_abort); + + sysbus_init_child_obj(obj, "ccu", &s->ccu, sizeof(s->ccu), + TYPE_AW_H3_CCU); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_SRAM_C], &s->sram_c); + /* Clock Control Unit */ + qdev_init_nofail(DEVICE(&s->ccu)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccu), 0, s->memmap[AW_H3_CCU]); + /* UART0. For future clocktree API: All UARTS are connected to APB2_CLK. */ serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART0], 2, qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART0), diff --git a/hw/misc/allwinner-h3-ccu.c b/hw/misc/allwinner-h3-ccu.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-h3-ccu.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 Clock Control Unit emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-h3-ccu.h" + +/* CCU register offsets */ +enum { + REG_PLL_CPUX = 0x0000, /* PLL CPUX Control */ + REG_PLL_AUDIO = 0x0008, /* PLL Audio Control */ + REG_PLL_VIDEO = 0x0010, /* PLL Video Control */ + REG_PLL_VE = 0x0018, /* PLL VE Control */ + REG_PLL_DDR = 0x0020, /* PLL DDR Control */ + REG_PLL_PERIPH0 = 0x0028, /* PLL Peripherals 0 Control */ + REG_PLL_GPU = 0x0038, /* PLL GPU Control */ + REG_PLL_PERIPH1 = 0x0044, /* PLL Peripherals 1 Control */ + REG_PLL_DE = 0x0048, /* PLL Display Engine Control */ + REG_CPUX_AXI = 0x0050, /* CPUX/AXI Configuration */ + REG_APB1 = 0x0054, /* ARM Peripheral Bus 1 Config */ + REG_APB2 = 0x0058, /* ARM Peripheral Bus 2 Config */ + REG_DRAM_CFG = 0x00F4, /* DRAM Configuration */ + REG_MBUS = 0x00FC, /* MBUS Reset */ + REG_PLL_TIME0 = 0x0200, /* PLL Stable Time 0 */ + REG_PLL_TIME1 = 0x0204, /* PLL Stable Time 1 */ + REG_PLL_CPUX_BIAS = 0x0220, /* PLL CPUX Bias */ + REG_PLL_AUDIO_BIAS = 0x0224, /* PLL Audio Bias */ + REG_PLL_VIDEO_BIAS = 0x0228, /* PLL Video Bias */ + REG_PLL_VE_BIAS = 0x022C, /* PLL VE Bias */ + REG_PLL_DDR_BIAS = 0x0230, /* PLL DDR Bias */ + REG_PLL_PERIPH0_BIAS = 0x0234, /* PLL Peripherals 0 Bias */ + REG_PLL_GPU_BIAS = 0x023C, /* PLL GPU Bias */ + REG_PLL_PERIPH1_BIAS = 0x0244, /* PLL Peripherals 1 Bias */ + REG_PLL_DE_BIAS = 0x0248, /* PLL Display Engine Bias */ + REG_PLL_CPUX_TUNING = 0x0250, /* PLL CPUX Tuning */ + REG_PLL_DDR_TUNING = 0x0260, /* PLL DDR Tuning */ +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* CCU register flags */ +enum { + REG_DRAM_CFG_UPDATE = (1 << 16), +}; + +enum { + REG_PLL_ENABLE = (1 << 31), + REG_PLL_LOCK = (1 << 28), +}; + + +/* CCU register reset values */ +enum { + REG_PLL_CPUX_RST = 0x00001000, + REG_PLL_AUDIO_RST = 0x00035514, + REG_PLL_VIDEO_RST = 0x03006207, + REG_PLL_VE_RST = 0x03006207, + REG_PLL_DDR_RST = 0x00001000, + REG_PLL_PERIPH0_RST = 0x00041811, + REG_PLL_GPU_RST = 0x03006207, + REG_PLL_PERIPH1_RST = 0x00041811, + REG_PLL_DE_RST = 0x03006207, + REG_CPUX_AXI_RST = 0x00010000, + REG_APB1_RST = 0x00001010, + REG_APB2_RST = 0x01000000, + REG_DRAM_CFG_RST = 0x00000000, + REG_MBUS_RST = 0x80000000, + REG_PLL_TIME0_RST = 0x000000FF, + REG_PLL_TIME1_RST = 0x000000FF, + REG_PLL_CPUX_BIAS_RST = 0x08100200, + REG_PLL_AUDIO_BIAS_RST = 0x10100000, + REG_PLL_VIDEO_BIAS_RST = 0x10100000, + REG_PLL_VE_BIAS_RST = 0x10100000, + REG_PLL_DDR_BIAS_RST = 0x81104000, + REG_PLL_PERIPH0_BIAS_RST = 0x10100010, + REG_PLL_GPU_BIAS_RST = 0x10100000, + REG_PLL_PERIPH1_BIAS_RST = 0x10100010, + REG_PLL_DE_BIAS_RST = 0x10100000, + REG_PLL_CPUX_TUNING_RST = 0x0A101000, + REG_PLL_DDR_TUNING_RST = 0x14880000, +}; + +static uint64_t allwinner_h3_ccu_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwH3ClockCtlState *s = AW_H3_CCU(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case 0x308 ... AW_H3_CCU_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_h3_ccu_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwH3ClockCtlState *s = AW_H3_CCU(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_DRAM_CFG: /* DRAM Configuration */ + val &= ~REG_DRAM_CFG_UPDATE; + break; + case REG_PLL_CPUX: /* PLL CPUX Control */ + case REG_PLL_AUDIO: /* PLL Audio Control */ + case REG_PLL_VIDEO: /* PLL Video Control */ + case REG_PLL_VE: /* PLL VE Control */ + case REG_PLL_DDR: /* PLL DDR Control */ + case REG_PLL_PERIPH0: /* PLL Peripherals 0 Control */ + case REG_PLL_GPU: /* PLL GPU Control */ + case REG_PLL_PERIPH1: /* PLL Peripherals 1 Control */ + case REG_PLL_DE: /* PLL Display Engine Control */ + if (val & REG_PLL_ENABLE) { + val |= REG_PLL_LOCK; + } + break; + case 0x308 ... AW_H3_CCU_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_h3_ccu_ops = { + .read = allwinner_h3_ccu_read, + .write = allwinner_h3_ccu_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_h3_ccu_reset(DeviceState *dev) +{ + AwH3ClockCtlState *s = AW_H3_CCU(dev); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_PLL_CPUX)] = REG_PLL_CPUX_RST; + s->regs[REG_INDEX(REG_PLL_AUDIO)] = REG_PLL_AUDIO_RST; + s->regs[REG_INDEX(REG_PLL_VIDEO)] = REG_PLL_VIDEO_RST; + s->regs[REG_INDEX(REG_PLL_VE)] = REG_PLL_VE_RST; + s->regs[REG_INDEX(REG_PLL_DDR)] = REG_PLL_DDR_RST; + s->regs[REG_INDEX(REG_PLL_PERIPH0)] = REG_PLL_PERIPH0_RST; + s->regs[REG_INDEX(REG_PLL_GPU)] = REG_PLL_GPU_RST; + s->regs[REG_INDEX(REG_PLL_PERIPH1)] = REG_PLL_PERIPH1_RST; + s->regs[REG_INDEX(REG_PLL_DE)] = REG_PLL_DE_RST; + s->regs[REG_INDEX(REG_CPUX_AXI)] = REG_CPUX_AXI_RST; + s->regs[REG_INDEX(REG_APB1)] = REG_APB1_RST; + s->regs[REG_INDEX(REG_APB2)] = REG_APB2_RST; + s->regs[REG_INDEX(REG_DRAM_CFG)] = REG_DRAM_CFG_RST; + s->regs[REG_INDEX(REG_MBUS)] = REG_MBUS_RST; + s->regs[REG_INDEX(REG_PLL_TIME0)] = REG_PLL_TIME0_RST; + s->regs[REG_INDEX(REG_PLL_TIME1)] = REG_PLL_TIME1_RST; + s->regs[REG_INDEX(REG_PLL_CPUX_BIAS)] = REG_PLL_CPUX_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_AUDIO_BIAS)] = REG_PLL_AUDIO_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_VIDEO_BIAS)] = REG_PLL_VIDEO_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_VE_BIAS)] = REG_PLL_VE_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_DDR_BIAS)] = REG_PLL_DDR_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_PERIPH0_BIAS)] = REG_PLL_PERIPH0_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_GPU_BIAS)] = REG_PLL_GPU_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_PERIPH1_BIAS)] = REG_PLL_PERIPH1_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_DE_BIAS)] = REG_PLL_DE_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_CPUX_TUNING)] = REG_PLL_CPUX_TUNING_RST; + s->regs[REG_INDEX(REG_PLL_DDR_TUNING)] = REG_PLL_DDR_TUNING_RST; +} + +static void allwinner_h3_ccu_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwH3ClockCtlState *s = AW_H3_CCU(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_h3_ccu_ops, s, + TYPE_AW_H3_CCU, AW_H3_CCU_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_h3_ccu_vmstate = { + .name = "allwinner-h3-ccu", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwH3ClockCtlState, AW_H3_CCU_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_h3_ccu_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_h3_ccu_reset; + dc->vmsd = &allwinner_h3_ccu_vmstate; +} + +static const TypeInfo allwinner_h3_ccu_info = { + .name = TYPE_AW_H3_CCU, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_h3_ccu_init, + .instance_size = sizeof(AwH3ClockCtlState), + .class_init = allwinner_h3_ccu_class_init, +}; + +static void allwinner_h3_ccu_register(void) +{ + type_register_static(&allwinner_h3_ccu_info); +} + +type_init(allwinner_h3_ccu_register) -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Allwinner H3 System on Chip contains multiple USB 2.0 bus connections which provide software access using the Enhanced Host Controller Interface (EHCI) and Open Host Controller Interface (OHCI) interfaces. This commit adds support for both interfaces in the Allwinner H3 System on Chip. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-5-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-ehci.h | 1 + include/hw/arm/allwinner-h3.h | 8 +++++++ hw/arm/allwinner-h3.c | 44 +++++++++++++++++++++++++++++++++++ hw/usb/hcd-ehci-sysbus.c | 17 ++++++++++++++ hw/arm/Kconfig | 2 ++ 5 files changed, 72 insertions(+) diff --git a/hw/usb/hcd-ehci.h b/hw/usb/hcd-ehci.h index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.h +++ b/hw/usb/hcd-ehci.h @@ -XXX,XX +XXX,XX @@ typedef struct EHCIPCIState { #define TYPE_SYS_BUS_EHCI "sysbus-ehci-usb" #define TYPE_PLATFORM_EHCI "platform-ehci-usb" #define TYPE_EXYNOS4210_EHCI "exynos4210-ehci-usb" +#define TYPE_AW_H3_EHCI "aw-h3-ehci-usb" #define TYPE_TEGRA2_EHCI "tegra2-ehci-usb" #define TYPE_PPC4xx_EHCI "ppc4xx-ehci-usb" #define TYPE_FUSBH200_EHCI "fusbh200-ehci-usb" diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ enum { AW_H3_SRAM_A1, AW_H3_SRAM_A2, AW_H3_SRAM_C, + AW_H3_EHCI0, + AW_H3_OHCI0, + AW_H3_EHCI1, + AW_H3_OHCI1, + AW_H3_EHCI2, + AW_H3_OHCI2, + AW_H3_EHCI3, + AW_H3_OHCI3, AW_H3_CCU, AW_H3_PIT, AW_H3_UART0, diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/char/serial.h" #include "hw/misc/unimp.h" +#include "hw/usb/hcd-ehci.h" #include "sysemu/sysemu.h" #include "hw/arm/allwinner-h3.h" @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_SRAM_A1] = 0x00000000, [AW_H3_SRAM_A2] = 0x00044000, [AW_H3_SRAM_C] = 0x00010000, + [AW_H3_EHCI0] = 0x01c1a000, + [AW_H3_OHCI0] = 0x01c1a400, + [AW_H3_EHCI1] = 0x01c1b000, + [AW_H3_OHCI1] = 0x01c1b400, + [AW_H3_EHCI2] = 0x01c1c000, + [AW_H3_OHCI2] = 0x01c1c400, + [AW_H3_EHCI3] = 0x01c1d000, + [AW_H3_OHCI3] = 0x01c1d400, [AW_H3_CCU] = 0x01c20000, [AW_H3_PIT] = 0x01c20c00, [AW_H3_UART0] = 0x01c28000, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_UART3 = 3, AW_H3_GIC_SPI_TIMER0 = 18, AW_H3_GIC_SPI_TIMER1 = 19, + AW_H3_GIC_SPI_EHCI0 = 72, + AW_H3_GIC_SPI_OHCI0 = 73, + AW_H3_GIC_SPI_EHCI1 = 74, + AW_H3_GIC_SPI_OHCI1 = 75, + AW_H3_GIC_SPI_EHCI2 = 76, + AW_H3_GIC_SPI_OHCI2 = 77, + AW_H3_GIC_SPI_EHCI3 = 78, + AW_H3_GIC_SPI_OHCI3 = 79, }; /* Allwinner H3 general constants */ @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_init_nofail(DEVICE(&s->ccu)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccu), 0, s->memmap[AW_H3_CCU]); + /* Universal Serial Bus */ + sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_EHCI0)); + sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI1], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_EHCI1)); + sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI2], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_EHCI2)); + sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI3], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_EHCI3)); + + sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_OHCI0], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_OHCI0)); + sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_OHCI1], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_OHCI1)); + sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_OHCI2], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_OHCI2)); + sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_OHCI3], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_OHCI3)); + /* UART0. For future clocktree API: All UARTS are connected to APB2_CLK. */ serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART0], 2, qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART0), diff --git a/hw/usb/hcd-ehci-sysbus.c b/hw/usb/hcd-ehci-sysbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci-sysbus.c +++ b/hw/usb/hcd-ehci-sysbus.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo ehci_exynos4210_type_info = { .class_init = ehci_exynos4210_class_init, }; +static void ehci_aw_h3_class_init(ObjectClass *oc, void *data) +{ + SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); + DeviceClass *dc = DEVICE_CLASS(oc); + + sec->capsbase = 0x0; + sec->opregbase = 0x10; + set_bit(DEVICE_CATEGORY_USB, dc->categories); +} + +static const TypeInfo ehci_aw_h3_type_info = { + .name = TYPE_AW_H3_EHCI, + .parent = TYPE_SYS_BUS_EHCI, + .class_init = ehci_aw_h3_class_init, +}; + static void ehci_tegra2_class_init(ObjectClass *oc, void *data) { SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void ehci_sysbus_register_types(void) type_register_static(&ehci_type_info); type_register_static(&ehci_platform_type_info); type_register_static(&ehci_exynos4210_type_info); + type_register_static(&ehci_aw_h3_type_info); type_register_static(&ehci_tegra2_type_info); type_register_static(&ehci_ppc4xx_type_info); type_register_static(&ehci_fusbh200_type_info); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_H3 select ARM_TIMER select ARM_GIC select UNIMP + select USB_OHCI + select USB_EHCI_SYSBUS config RASPI bool -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Allwinner H3 System on Chip has an System Control module that provides system wide generic controls and device information. This commit adds support for the Allwinner H3 System Control module. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-6-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 3 + include/hw/misc/allwinner-h3-sysctrl.h | 67 ++++++++++++ hw/arm/allwinner-h3.c | 9 +- hw/misc/allwinner-h3-sysctrl.c | 140 +++++++++++++++++++++++++ 5 files changed, 219 insertions(+), 1 deletion(-) create mode 100644 include/hw/misc/allwinner-h3-sysctrl.h create mode 100644 hw/misc/allwinner-h3-sysctrl.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_MACIO) += macio/ common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-sysctrl.o common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o common-obj-$(CONFIG_NSERIES) += cbus.o common-obj-$(CONFIG_ECCMEMCTL) += eccmemctl.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/allwinner-a10-pit.h" #include "hw/intc/arm_gic.h" #include "hw/misc/allwinner-h3-ccu.h" +#include "hw/misc/allwinner-h3-sysctrl.h" #include "target/arm/cpu.h" /** @@ -XXX,XX +XXX,XX @@ enum { AW_H3_SRAM_A1, AW_H3_SRAM_A2, AW_H3_SRAM_C, + AW_H3_SYSCTRL, AW_H3_EHCI0, AW_H3_OHCI0, AW_H3_EHCI1, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { const hwaddr *memmap; AwA10PITState timer; AwH3ClockCtlState ccu; + AwH3SysCtrlState sysctrl; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/misc/allwinner-h3-sysctrl.h b/include/hw/misc/allwinner-h3-sysctrl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-h3-sysctrl.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 System Control emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_H3_SYSCTRL_H +#define HW_MISC_ALLWINNER_H3_SYSCTRL_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * @name Constants + * @{ + */ + +/** Highest register address used by System Control device */ +#define AW_H3_SYSCTRL_REGS_MAXADDR (0x30) + +/** Total number of known registers */ +#define AW_H3_SYSCTRL_REGS_NUM ((AW_H3_SYSCTRL_REGS_MAXADDR / \ + sizeof(uint32_t)) + 1) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_H3_SYSCTRL "allwinner-h3-sysctrl" +#define AW_H3_SYSCTRL(obj) \ + OBJECT_CHECK(AwH3SysCtrlState, (obj), TYPE_AW_H3_SYSCTRL) + +/** @} */ + +/** + * Allwinner H3 System Control object instance state + */ +typedef struct AwH3SysCtrlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_H3_SYSCTRL_REGS_NUM]; + +} AwH3SysCtrlState; + +#endif /* HW_MISC_ALLWINNER_H3_SYSCTRL_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_SRAM_A1] = 0x00000000, [AW_H3_SRAM_A2] = 0x00044000, [AW_H3_SRAM_C] = 0x00010000, + [AW_H3_SYSCTRL] = 0x01c00000, [AW_H3_EHCI0] = 0x01c1a000, [AW_H3_OHCI0] = 0x01c1a400, [AW_H3_EHCI1] = 0x01c1b000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { } unimplemented[] = { { "d-engine", 0x01000000, 4 * MiB }, { "d-inter", 0x01400000, 128 * KiB }, - { "syscon", 0x01c00000, 4 * KiB }, { "dma", 0x01c02000, 4 * KiB }, { "nfdc", 0x01c03000, 4 * KiB }, { "ts", 0x01c06000, 4 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) sysbus_init_child_obj(obj, "ccu", &s->ccu, sizeof(s->ccu), TYPE_AW_H3_CCU); + + sysbus_init_child_obj(obj, "sysctrl", &s->sysctrl, sizeof(s->sysctrl), + TYPE_AW_H3_SYSCTRL); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_init_nofail(DEVICE(&s->ccu)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccu), 0, s->memmap[AW_H3_CCU]); + /* System Control */ + qdev_init_nofail(DEVICE(&s->sysctrl)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysctrl), 0, s->memmap[AW_H3_SYSCTRL]); + /* Universal Serial Bus */ sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], qdev_get_gpio_in(DEVICE(&s->gic), diff --git a/hw/misc/allwinner-h3-sysctrl.c b/hw/misc/allwinner-h3-sysctrl.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-h3-sysctrl.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 System Control emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-h3-sysctrl.h" + +/* System Control register offsets */ +enum { + REG_VER = 0x24, /* Version */ + REG_EMAC_PHY_CLK = 0x30, /* EMAC PHY Clock */ +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* System Control register reset values */ +enum { + REG_VER_RST = 0x0, + REG_EMAC_PHY_CLK_RST = 0x58000, +}; + +static uint64_t allwinner_h3_sysctrl_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwH3SysCtrlState *s = AW_H3_SYSCTRL(opaque); + const uint32_t idx = REG_INDEX(offset); + + if (idx >= AW_H3_SYSCTRL_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_h3_sysctrl_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwH3SysCtrlState *s = AW_H3_SYSCTRL(opaque); + const uint32_t idx = REG_INDEX(offset); + + if (idx >= AW_H3_SYSCTRL_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + switch (offset) { + case REG_VER: /* Version */ + break; + default: + s->regs[idx] = (uint32_t) val; + break; + } +} + +static const MemoryRegionOps allwinner_h3_sysctrl_ops = { + .read = allwinner_h3_sysctrl_read, + .write = allwinner_h3_sysctrl_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_h3_sysctrl_reset(DeviceState *dev) +{ + AwH3SysCtrlState *s = AW_H3_SYSCTRL(dev); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_VER)] = REG_VER_RST; + s->regs[REG_INDEX(REG_EMAC_PHY_CLK)] = REG_EMAC_PHY_CLK_RST; +} + +static void allwinner_h3_sysctrl_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwH3SysCtrlState *s = AW_H3_SYSCTRL(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_h3_sysctrl_ops, s, + TYPE_AW_H3_SYSCTRL, 4 * KiB); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_h3_sysctrl_vmstate = { + .name = "allwinner-h3-sysctrl", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwH3SysCtrlState, AW_H3_SYSCTRL_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_h3_sysctrl_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_h3_sysctrl_reset; + dc->vmsd = &allwinner_h3_sysctrl_vmstate; +} + +static const TypeInfo allwinner_h3_sysctrl_info = { + .name = TYPE_AW_H3_SYSCTRL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_h3_sysctrl_init, + .instance_size = sizeof(AwH3SysCtrlState), + .class_init = allwinner_h3_sysctrl_class_init, +}; + +static void allwinner_h3_sysctrl_register(void) +{ + type_register_static(&allwinner_h3_sysctrl_info); +} + +type_init(allwinner_h3_sysctrl_register) -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> Various Allwinner System on Chip designs contain multiple processors that can be configured and reset using the generic CPU Configuration module interface. This commit adds support for the Allwinner CPU configuration interface which emulates the following features: * CPU reset * CPU status Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-7-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 3 + include/hw/misc/allwinner-cpucfg.h | 52 ++++++ hw/arm/allwinner-h3.c | 9 +- hw/misc/allwinner-cpucfg.c | 282 +++++++++++++++++++++++++++++ hw/misc/trace-events | 5 + 6 files changed, 351 insertions(+), 1 deletion(-) create mode 100644 include/hw/misc/allwinner-cpucfg.h create mode 100644 hw/misc/allwinner-cpucfg.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_MACIO) += macio/ common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o +obj-$(CONFIG_ALLWINNER_H3) += allwinner-cpucfg.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-sysctrl.o common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o common-obj-$(CONFIG_NSERIES) += cbus.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/allwinner-a10-pit.h" #include "hw/intc/arm_gic.h" #include "hw/misc/allwinner-h3-ccu.h" +#include "hw/misc/allwinner-cpucfg.h" #include "hw/misc/allwinner-h3-sysctrl.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_CPU, AW_H3_GIC_HYP, AW_H3_GIC_VCPU, + AW_H3_CPUCFG, AW_H3_SDRAM }; @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { const hwaddr *memmap; AwA10PITState timer; AwH3ClockCtlState ccu; + AwCpuCfgState cpucfg; AwH3SysCtrlState sysctrl; GICState gic; MemoryRegion sram_a1; diff --git a/include/hw/misc/allwinner-cpucfg.h b/include/hw/misc/allwinner-cpucfg.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-cpucfg.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner CPU Configuration Module emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_CPUCFG_H +#define HW_MISC_ALLWINNER_CPUCFG_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * Object model + * @{ + */ + +#define TYPE_AW_CPUCFG "allwinner-cpucfg" +#define AW_CPUCFG(obj) \ + OBJECT_CHECK(AwCpuCfgState, (obj), TYPE_AW_CPUCFG) + +/** @} */ + +/** + * Allwinner CPU Configuration Module instance state + */ +typedef struct AwCpuCfgState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + MemoryRegion iomem; + uint32_t gen_ctrl; + uint32_t super_standby; + uint32_t entry_addr; + +} AwCpuCfgState; + +#endif /* HW_MISC_ALLWINNER_CPUCFG_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_GIC_CPU] = 0x01c82000, [AW_H3_GIC_HYP] = 0x01c84000, [AW_H3_GIC_VCPU] = 0x01c86000, + [AW_H3_CPUCFG] = 0x01f01c00, [AW_H3_SDRAM] = 0x40000000 }; @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "r_wdog", 0x01f01000, 1 * KiB }, { "r_prcm", 0x01f01400, 1 * KiB }, { "r_twd", 0x01f01800, 1 * KiB }, - { "r_cpucfg", 0x01f01c00, 1 * KiB }, { "r_cir-rx", 0x01f02000, 1 * KiB }, { "r_twi", 0x01f02400, 1 * KiB }, { "r_uart", 0x01f02800, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) sysbus_init_child_obj(obj, "sysctrl", &s->sysctrl, sizeof(s->sysctrl), TYPE_AW_H3_SYSCTRL); + + sysbus_init_child_obj(obj, "cpucfg", &s->cpucfg, sizeof(s->cpucfg), + TYPE_AW_CPUCFG); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_init_nofail(DEVICE(&s->sysctrl)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysctrl), 0, s->memmap[AW_H3_SYSCTRL]); + /* CPU Configuration */ + qdev_init_nofail(DEVICE(&s->cpucfg)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->cpucfg), 0, s->memmap[AW_H3_CPUCFG]); + /* Universal Serial Bus */ sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], qdev_get_gpio_in(DEVICE(&s->gic), diff --git a/hw/misc/allwinner-cpucfg.c b/hw/misc/allwinner-cpucfg.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-cpucfg.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner CPU Configuration Module emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/error-report.h" +#include "qemu/timer.h" +#include "hw/core/cpu.h" +#include "target/arm/arm-powerctl.h" +#include "target/arm/cpu.h" +#include "hw/misc/allwinner-cpucfg.h" +#include "trace.h" + +/* CPUCFG register offsets */ +enum { + REG_CPUS_RST_CTRL = 0x0000, /* CPUs Reset Control */ + REG_CPU0_RST_CTRL = 0x0040, /* CPU#0 Reset Control */ + REG_CPU0_CTRL = 0x0044, /* CPU#0 Control */ + REG_CPU0_STATUS = 0x0048, /* CPU#0 Status */ + REG_CPU1_RST_CTRL = 0x0080, /* CPU#1 Reset Control */ + REG_CPU1_CTRL = 0x0084, /* CPU#1 Control */ + REG_CPU1_STATUS = 0x0088, /* CPU#1 Status */ + REG_CPU2_RST_CTRL = 0x00C0, /* CPU#2 Reset Control */ + REG_CPU2_CTRL = 0x00C4, /* CPU#2 Control */ + REG_CPU2_STATUS = 0x00C8, /* CPU#2 Status */ + REG_CPU3_RST_CTRL = 0x0100, /* CPU#3 Reset Control */ + REG_CPU3_CTRL = 0x0104, /* CPU#3 Control */ + REG_CPU3_STATUS = 0x0108, /* CPU#3 Status */ + REG_CPU_SYS_RST = 0x0140, /* CPU System Reset */ + REG_CLK_GATING = 0x0144, /* CPU Clock Gating */ + REG_GEN_CTRL = 0x0184, /* General Control */ + REG_SUPER_STANDBY = 0x01A0, /* Super Standby Flag */ + REG_ENTRY_ADDR = 0x01A4, /* Reset Entry Address */ + REG_DBG_EXTERN = 0x01E4, /* Debug External */ + REG_CNT64_CTRL = 0x0280, /* 64-bit Counter Control */ + REG_CNT64_LOW = 0x0284, /* 64-bit Counter Low */ + REG_CNT64_HIGH = 0x0288, /* 64-bit Counter High */ +}; + +/* CPUCFG register flags */ +enum { + CPUX_RESET_RELEASED = ((1 << 1) | (1 << 0)), + CPUX_STATUS_SMP = (1 << 0), + CPU_SYS_RESET_RELEASED = (1 << 0), + CLK_GATING_ENABLE = ((1 << 8) | 0xF), +}; + +/* CPUCFG register reset values */ +enum { + REG_CLK_GATING_RST = 0x0000010F, + REG_GEN_CTRL_RST = 0x00000020, + REG_SUPER_STANDBY_RST = 0x0, + REG_CNT64_CTRL_RST = 0x0, +}; + +/* CPUCFG constants */ +enum { + CPU_EXCEPTION_LEVEL_ON_RESET = 3, /* EL3 */ +}; + +static void allwinner_cpucfg_cpu_reset(AwCpuCfgState *s, uint8_t cpu_id) +{ + int ret; + + trace_allwinner_cpucfg_cpu_reset(cpu_id, s->entry_addr); + + ARMCPU *target_cpu = ARM_CPU(arm_get_cpu_by_id(cpu_id)); + if (!target_cpu) { + /* + * Called with a bogus value for cpu_id. Guest error will + * already have been logged, we can simply return here. + */ + return; + } + bool target_aa64 = arm_feature(&target_cpu->env, ARM_FEATURE_AARCH64); + + ret = arm_set_cpu_on(cpu_id, s->entry_addr, 0, + CPU_EXCEPTION_LEVEL_ON_RESET, target_aa64); + if (ret != QEMU_ARM_POWERCTL_RET_SUCCESS) { + error_report("%s: failed to bring up CPU %d: err %d", + __func__, cpu_id, ret); + return; + } +} + +static uint64_t allwinner_cpucfg_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwCpuCfgState *s = AW_CPUCFG(opaque); + uint64_t val = 0; + + switch (offset) { + case REG_CPUS_RST_CTRL: /* CPUs Reset Control */ + case REG_CPU_SYS_RST: /* CPU System Reset */ + val = CPU_SYS_RESET_RELEASED; + break; + case REG_CPU0_RST_CTRL: /* CPU#0 Reset Control */ + case REG_CPU1_RST_CTRL: /* CPU#1 Reset Control */ + case REG_CPU2_RST_CTRL: /* CPU#2 Reset Control */ + case REG_CPU3_RST_CTRL: /* CPU#3 Reset Control */ + val = CPUX_RESET_RELEASED; + break; + case REG_CPU0_CTRL: /* CPU#0 Control */ + case REG_CPU1_CTRL: /* CPU#1 Control */ + case REG_CPU2_CTRL: /* CPU#2 Control */ + case REG_CPU3_CTRL: /* CPU#3 Control */ + val = 0; + break; + case REG_CPU0_STATUS: /* CPU#0 Status */ + case REG_CPU1_STATUS: /* CPU#1 Status */ + case REG_CPU2_STATUS: /* CPU#2 Status */ + case REG_CPU3_STATUS: /* CPU#3 Status */ + val = CPUX_STATUS_SMP; + break; + case REG_CLK_GATING: /* CPU Clock Gating */ + val = CLK_GATING_ENABLE; + break; + case REG_GEN_CTRL: /* General Control */ + val = s->gen_ctrl; + break; + case REG_SUPER_STANDBY: /* Super Standby Flag */ + val = s->super_standby; + break; + case REG_ENTRY_ADDR: /* Reset Entry Address */ + val = s->entry_addr; + break; + case REG_DBG_EXTERN: /* Debug External */ + case REG_CNT64_CTRL: /* 64-bit Counter Control */ + case REG_CNT64_LOW: /* 64-bit Counter Low */ + case REG_CNT64_HIGH: /* 64-bit Counter High */ + qemu_log_mask(LOG_UNIMP, "%s: unimplemented register at 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + trace_allwinner_cpucfg_read(offset, val, size); + + return val; +} + +static void allwinner_cpucfg_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwCpuCfgState *s = AW_CPUCFG(opaque); + + trace_allwinner_cpucfg_write(offset, val, size); + + switch (offset) { + case REG_CPUS_RST_CTRL: /* CPUs Reset Control */ + case REG_CPU_SYS_RST: /* CPU System Reset */ + break; + case REG_CPU0_RST_CTRL: /* CPU#0 Reset Control */ + case REG_CPU1_RST_CTRL: /* CPU#1 Reset Control */ + case REG_CPU2_RST_CTRL: /* CPU#2 Reset Control */ + case REG_CPU3_RST_CTRL: /* CPU#3 Reset Control */ + if (val) { + allwinner_cpucfg_cpu_reset(s, (offset - REG_CPU0_RST_CTRL) >> 6); + } + break; + case REG_CPU0_CTRL: /* CPU#0 Control */ + case REG_CPU1_CTRL: /* CPU#1 Control */ + case REG_CPU2_CTRL: /* CPU#2 Control */ + case REG_CPU3_CTRL: /* CPU#3 Control */ + case REG_CPU0_STATUS: /* CPU#0 Status */ + case REG_CPU1_STATUS: /* CPU#1 Status */ + case REG_CPU2_STATUS: /* CPU#2 Status */ + case REG_CPU3_STATUS: /* CPU#3 Status */ + case REG_CLK_GATING: /* CPU Clock Gating */ + break; + case REG_GEN_CTRL: /* General Control */ + s->gen_ctrl = val; + break; + case REG_SUPER_STANDBY: /* Super Standby Flag */ + s->super_standby = val; + break; + case REG_ENTRY_ADDR: /* Reset Entry Address */ + s->entry_addr = val; + break; + case REG_DBG_EXTERN: /* Debug External */ + case REG_CNT64_CTRL: /* 64-bit Counter Control */ + case REG_CNT64_LOW: /* 64-bit Counter Low */ + case REG_CNT64_HIGH: /* 64-bit Counter High */ + qemu_log_mask(LOG_UNIMP, "%s: unimplemented register at 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } +} + +static const MemoryRegionOps allwinner_cpucfg_ops = { + .read = allwinner_cpucfg_read, + .write = allwinner_cpucfg_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_cpucfg_reset(DeviceState *dev) +{ + AwCpuCfgState *s = AW_CPUCFG(dev); + + /* Set default values for registers */ + s->gen_ctrl = REG_GEN_CTRL_RST; + s->super_standby = REG_SUPER_STANDBY_RST; + s->entry_addr = 0; +} + +static void allwinner_cpucfg_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwCpuCfgState *s = AW_CPUCFG(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_cpucfg_ops, s, + TYPE_AW_CPUCFG, 1 * KiB); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_cpucfg_vmstate = { + .name = "allwinner-cpucfg", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(gen_ctrl, AwCpuCfgState), + VMSTATE_UINT32(super_standby, AwCpuCfgState), + VMSTATE_UINT32(entry_addr, AwCpuCfgState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_cpucfg_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_cpucfg_reset; + dc->vmsd = &allwinner_cpucfg_vmstate; +} + +static const TypeInfo allwinner_cpucfg_info = { + .name = TYPE_AW_CPUCFG, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_cpucfg_init, + .instance_size = sizeof(AwCpuCfgState), + .class_init = allwinner_cpucfg_class_init, +}; + +static void allwinner_cpucfg_register(void) +{ + type_register_static(&allwinner_cpucfg_info); +} + +type_init(allwinner_cpucfg_register) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# allwinner-cpucfg.c +allwinner_cpucfg_cpu_reset(uint8_t cpu_id, uint32_t reset_addr) "id %u, reset_addr 0x%" PRIu32 +allwinner_cpucfg_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_cpucfg_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 + # eccmemctl.c ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x" ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x" -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Security Identifier device found in various Allwinner System on Chip designs gives applications a per-board unique identifier. This commit adds support for the Allwinner Security Identifier using a 128-bit UUID value as input. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-8-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 3 + include/hw/misc/allwinner-sid.h | 60 ++++++++++++ hw/arm/allwinner-h3.c | 11 ++- hw/arm/orangepi.c | 8 ++ hw/misc/allwinner-sid.c | 168 ++++++++++++++++++++++++++++++++ hw/misc/trace-events | 4 + 7 files changed, 254 insertions(+), 1 deletion(-) create mode 100644 include/hw/misc/allwinner-sid.h create mode 100644 hw/misc/allwinner-sid.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o obj-$(CONFIG_ALLWINNER_H3) += allwinner-cpucfg.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-sysctrl.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-sid.o common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o common-obj-$(CONFIG_NSERIES) += cbus.o common-obj-$(CONFIG_ECCMEMCTL) += eccmemctl.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-h3-ccu.h" #include "hw/misc/allwinner-cpucfg.h" #include "hw/misc/allwinner-h3-sysctrl.h" +#include "hw/misc/allwinner-sid.h" #include "target/arm/cpu.h" /** @@ -XXX,XX +XXX,XX @@ enum { AW_H3_SRAM_A2, AW_H3_SRAM_C, AW_H3_SYSCTRL, + AW_H3_SID, AW_H3_EHCI0, AW_H3_OHCI0, AW_H3_EHCI1, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { AwH3ClockCtlState ccu; AwCpuCfgState cpucfg; AwH3SysCtrlState sysctrl; + AwSidState sid; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/misc/allwinner-sid.h b/include/hw/misc/allwinner-sid.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-sid.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Security ID emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_SID_H +#define HW_MISC_ALLWINNER_SID_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "qemu/uuid.h" + +/** + * Object model + * @{ + */ + +#define TYPE_AW_SID "allwinner-sid" +#define AW_SID(obj) \ + OBJECT_CHECK(AwSidState, (obj), TYPE_AW_SID) + +/** @} */ + +/** + * Allwinner Security ID object instance state + */ +typedef struct AwSidState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Control register defines how and what to read */ + uint32_t control; + + /** RdKey register contains the data retrieved by the device */ + uint32_t rdkey; + + /** Stores the emulated device identifier */ + QemuUUID identifier; + +} AwSidState; + +#endif /* HW_MISC_ALLWINNER_SID_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_SRAM_A2] = 0x00044000, [AW_H3_SRAM_C] = 0x00010000, [AW_H3_SYSCTRL] = 0x01c00000, + [AW_H3_SID] = 0x01c14000, [AW_H3_EHCI0] = 0x01c1a000, [AW_H3_OHCI0] = 0x01c1a400, [AW_H3_EHCI1] = 0x01c1b000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "mmc0", 0x01c0f000, 4 * KiB }, { "mmc1", 0x01c10000, 4 * KiB }, { "mmc2", 0x01c11000, 4 * KiB }, - { "sid", 0x01c14000, 1 * KiB }, { "crypto", 0x01c15000, 4 * KiB }, { "msgbox", 0x01c17000, 4 * KiB }, { "spinlock", 0x01c18000, 4 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) sysbus_init_child_obj(obj, "cpucfg", &s->cpucfg, sizeof(s->cpucfg), TYPE_AW_CPUCFG); + + sysbus_init_child_obj(obj, "sid", &s->sid, sizeof(s->sid), + TYPE_AW_SID); + object_property_add_alias(obj, "identifier", OBJECT(&s->sid), + "identifier", &error_abort); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_init_nofail(DEVICE(&s->cpucfg)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->cpucfg), 0, s->memmap[AW_H3_CPUCFG]); + /* Security Identifier */ + qdev_init_nofail(DEVICE(&s->sid)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sid), 0, s->memmap[AW_H3_SID]); + /* Universal Serial Bus */ sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], qdev_get_gpio_in(DEVICE(&s->gic), diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/orangepi.c +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ static void orangepi_init(MachineState *machine) object_property_set_int(OBJECT(h3), 24 * 1000 * 1000, "clk1-freq", &error_abort); + /* Setup SID properties. Currently using a default fixed SID identifier. */ + if (qemu_uuid_is_null(&h3->sid.identifier)) { + qdev_prop_set_string(DEVICE(h3), "identifier", + "02c00081-1111-2222-3333-000044556677"); + } else if (ldl_be_p(&h3->sid.identifier.data[0]) != 0x02c00081) { + warn_report("Security Identifier value does not include H3 prefix"); + } + /* Mark H3 object realized */ object_property_set_bool(OBJECT(h3), true, "realized", &error_abort); diff --git a/hw/misc/allwinner-sid.c b/hw/misc/allwinner-sid.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-sid.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Security ID emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/guest-random.h" +#include "qapi/error.h" +#include "hw/qdev-properties.h" +#include "hw/misc/allwinner-sid.h" +#include "trace.h" + +/* SID register offsets */ +enum { + REG_PRCTL = 0x40, /* Control */ + REG_RDKEY = 0x60, /* Read Key */ +}; + +/* SID register flags */ +enum { + REG_PRCTL_WRITE = 0x0002, /* Unknown write flag */ + REG_PRCTL_OP_LOCK = 0xAC00, /* Lock operation */ +}; + +static uint64_t allwinner_sid_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwSidState *s = AW_SID(opaque); + uint64_t val = 0; + + switch (offset) { + case REG_PRCTL: /* Control */ + val = s->control; + break; + case REG_RDKEY: /* Read Key */ + val = s->rdkey; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + trace_allwinner_sid_read(offset, val, size); + + return val; +} + +static void allwinner_sid_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwSidState *s = AW_SID(opaque); + + trace_allwinner_sid_write(offset, val, size); + + switch (offset) { + case REG_PRCTL: /* Control */ + s->control = val; + + if ((s->control & REG_PRCTL_OP_LOCK) && + (s->control & REG_PRCTL_WRITE)) { + uint32_t id = s->control >> 16; + + if (id <= sizeof(QemuUUID) - sizeof(s->rdkey)) { + s->rdkey = ldl_be_p(&s->identifier.data[id]); + } + } + s->control &= ~REG_PRCTL_WRITE; + break; + case REG_RDKEY: /* Read Key */ + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } +} + +static const MemoryRegionOps allwinner_sid_ops = { + .read = allwinner_sid_read, + .write = allwinner_sid_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_sid_reset(DeviceState *dev) +{ + AwSidState *s = AW_SID(dev); + + /* Set default values for registers */ + s->control = 0; + s->rdkey = 0; +} + +static void allwinner_sid_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwSidState *s = AW_SID(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_sid_ops, s, + TYPE_AW_SID, 1 * KiB); + sysbus_init_mmio(sbd, &s->iomem); +} + +static Property allwinner_sid_properties[] = { + DEFINE_PROP_UUID_NODEFAULT("identifier", AwSidState, identifier), + DEFINE_PROP_END_OF_LIST() +}; + +static const VMStateDescription allwinner_sid_vmstate = { + .name = "allwinner-sid", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(control, AwSidState), + VMSTATE_UINT32(rdkey, AwSidState), + VMSTATE_UINT8_ARRAY_V(identifier.data, AwSidState, sizeof(QemuUUID), 1), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_sid_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_sid_reset; + dc->vmsd = &allwinner_sid_vmstate; + device_class_set_props(dc, allwinner_sid_properties); +} + +static const TypeInfo allwinner_sid_info = { + .name = TYPE_AW_SID, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_sid_init, + .instance_size = sizeof(AwSidState), + .class_init = allwinner_sid_class_init, +}; + +static void allwinner_sid_register(void) +{ + type_register_static(&allwinner_sid_info); +} + +type_init(allwinner_sid_register) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_cpucfg_cpu_reset(uint8_t cpu_id, uint32_t reset_addr) "id %u, reset_ad allwinner_cpucfg_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 allwinner_cpucfg_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +# allwinner-sid.c +allwinner_sid_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 + # eccmemctl.c ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x" ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x" -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Allwinner System on Chip families sun4i and above contain an integrated storage controller for Secure Digital (SD) and Multi Media Card (MMC) interfaces. This commit adds support for the Allwinner SD/MMC storage controller with the following emulated features: * DMA transfers * Direct FIFO I/O * Short/Long format command responses * Auto-Stop command (CMD12) * Insert & remove card detection The following boards are extended with the SD host controller: * Cubieboard (hw/arm/cubieboard.c) * Orange Pi PC (hw/arm/orangepi.c) Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-9-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/Makefile.objs | 1 + include/hw/arm/allwinner-a10.h | 2 + include/hw/arm/allwinner-h3.h | 3 + include/hw/sd/allwinner-sdhost.h | 135 +++++ hw/arm/allwinner-a10.c | 11 + hw/arm/allwinner-h3.c | 15 +- hw/arm/cubieboard.c | 15 + hw/arm/orangepi.c | 16 + hw/sd/allwinner-sdhost.c | 854 +++++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/sd/trace-events | 7 + 11 files changed, 1059 insertions(+), 1 deletion(-) create mode 100644 include/hw/sd/allwinner-sdhost.h create mode 100644 hw/sd/allwinner-sdhost.c diff --git a/hw/sd/Makefile.objs b/hw/sd/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/Makefile.objs +++ b/hw/sd/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_SD) += sd.o core.o sdmmc-internal.o common-obj-$(CONFIG_SDHCI) += sdhci.o common-obj-$(CONFIG_SDHCI_PCI) += sdhci-pci.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-sdhost.o common-obj-$(CONFIG_MILKYMIST) += milkymist-memcard.o common-obj-$(CONFIG_OMAP) += omap_mmc.o common-obj-$(CONFIG_PXA2XX) += pxa2xx_mmci.o diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/allwinner-a10-pit.h" #include "hw/intc/allwinner-a10-pic.h" #include "hw/net/allwinner_emac.h" +#include "hw/sd/allwinner-sdhost.h" #include "hw/ide/ahci.h" #include "hw/usb/hcd-ohci.h" #include "hw/usb/hcd-ehci.h" @@ -XXX,XX +XXX,XX @@ typedef struct AwA10State { AwA10PICState intc; AwEmacState emac; AllwinnerAHCIState sata; + AwSdHostState mmc0; MemoryRegion sram_a; EHCISysBusState ehci[AW_A10_NUM_USB]; OHCISysBusState ohci[AW_A10_NUM_USB]; diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-cpucfg.h" #include "hw/misc/allwinner-h3-sysctrl.h" #include "hw/misc/allwinner-sid.h" +#include "hw/sd/allwinner-sdhost.h" #include "target/arm/cpu.h" /** @@ -XXX,XX +XXX,XX @@ enum { AW_H3_SRAM_A2, AW_H3_SRAM_C, AW_H3_SYSCTRL, + AW_H3_MMC0, AW_H3_SID, AW_H3_EHCI0, AW_H3_OHCI0, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { AwCpuCfgState cpucfg; AwH3SysCtrlState sysctrl; AwSidState sid; + AwSdHostState mmc0; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/sd/allwinner-sdhost.h b/include/hw/sd/allwinner-sdhost.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/sd/allwinner-sdhost.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner (sun4i and above) SD Host Controller emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_SD_ALLWINNER_SDHOST_H +#define HW_SD_ALLWINNER_SDHOST_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "hw/sd/sd.h" + +/** + * Object model types + * @{ + */ + +/** Generic Allwinner SD Host Controller (abstract) */ +#define TYPE_AW_SDHOST "allwinner-sdhost" + +/** Allwinner sun4i family (A10, A12) */ +#define TYPE_AW_SDHOST_SUN4I TYPE_AW_SDHOST "-sun4i" + +/** Allwinner sun5i family and newer (A13, H2+, H3, etc) */ +#define TYPE_AW_SDHOST_SUN5I TYPE_AW_SDHOST "-sun5i" + +/** @} */ + +/** + * Object model macros + * @{ + */ + +#define AW_SDHOST(obj) \ + OBJECT_CHECK(AwSdHostState, (obj), TYPE_AW_SDHOST) +#define AW_SDHOST_CLASS(klass) \ + OBJECT_CLASS_CHECK(AwSdHostClass, (klass), TYPE_AW_SDHOST) +#define AW_SDHOST_GET_CLASS(obj) \ + OBJECT_GET_CLASS(AwSdHostClass, (obj), TYPE_AW_SDHOST) + +/** @} */ + +/** + * Allwinner SD Host Controller object instance state. + */ +typedef struct AwSdHostState { + /*< private >*/ + SysBusDevice busdev; + /*< public >*/ + + /** Secure Digital (SD) bus, which connects to SD card (if present) */ + SDBus sdbus; + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Interrupt output signal to notify CPU */ + qemu_irq irq; + + /** Number of bytes left in current DMA transfer */ + uint32_t transfer_cnt; + + /** + * @name Hardware Registers + * @{ + */ + + uint32_t global_ctl; /**< Global Control */ + uint32_t clock_ctl; /**< Clock Control */ + uint32_t timeout; /**< Timeout */ + uint32_t bus_width; /**< Bus Width */ + uint32_t block_size; /**< Block Size */ + uint32_t byte_count; /**< Byte Count */ + + uint32_t command; /**< Command */ + uint32_t command_arg; /**< Command Argument */ + uint32_t response[4]; /**< Command Response */ + + uint32_t irq_mask; /**< Interrupt Mask */ + uint32_t irq_status; /**< Raw Interrupt Status */ + uint32_t status; /**< Status */ + + uint32_t fifo_wlevel; /**< FIFO Water Level */ + uint32_t fifo_func_sel; /**< FIFO Function Select */ + uint32_t debug_enable; /**< Debug Enable */ + uint32_t auto12_arg; /**< Auto Command 12 Argument */ + uint32_t newtiming_set; /**< SD New Timing Set */ + uint32_t newtiming_debug; /**< SD New Timing Debug */ + uint32_t hardware_rst; /**< Hardware Reset */ + uint32_t dmac; /**< Internal DMA Controller Control */ + uint32_t desc_base; /**< Descriptor List Base Address */ + uint32_t dmac_status; /**< Internal DMA Controller Status */ + uint32_t dmac_irq; /**< Internal DMA Controller IRQ Enable */ + uint32_t card_threshold; /**< Card Threshold Control */ + uint32_t startbit_detect; /**< eMMC DDR Start Bit Detection Control */ + uint32_t response_crc; /**< Response CRC */ + uint32_t data_crc[8]; /**< Data CRC */ + uint32_t status_crc; /**< Status CRC */ + + /** @} */ + +} AwSdHostState; + +/** + * Allwinner SD Host Controller class-level struct. + * + * This struct is filled by each sunxi device specific code + * such that the generic code can use this struct to support + * all devices. + */ +typedef struct AwSdHostClass { + /*< private >*/ + SysBusDeviceClass parent_class; + /*< public >*/ + + /** Maximum buffer size in bytes per DMA descriptor */ + size_t max_desc_size; + +} AwSdHostClass; + +#endif /* HW_SD_ALLWINNER_SDHOST_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_PIC_REG_BASE 0x01c20400 #define AW_A10_PIT_REG_BASE 0x01c20c00 #define AW_A10_UART0_REG_BASE 0x01c28000 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) sizeof(s->ohci[i]), TYPE_SYSBUS_OHCI); } } + + sysbus_init_child_obj(obj, "mmc0", &s->mmc0, sizeof(s->mmc0), + TYPE_AW_SDHOST_SUN4I); } static void aw_a10_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(dev, 64 + i)); } } + + /* SD/MMC */ + qdev_init_nofail(DEVICE(&s->mmc0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc0), 0, AW_A10_MMC0_BASE); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, qdev_get_gpio_in(dev, 32)); + object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->mmc0), + "sd-bus", &error_abort); } static void aw_a10_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_SRAM_A2] = 0x00044000, [AW_H3_SRAM_C] = 0x00010000, [AW_H3_SYSCTRL] = 0x01c00000, + [AW_H3_MMC0] = 0x01c0f000, [AW_H3_SID] = 0x01c14000, [AW_H3_EHCI0] = 0x01c1a000, [AW_H3_OHCI0] = 0x01c1a400, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "lcd0", 0x01c0c000, 4 * KiB }, { "lcd1", 0x01c0d000, 4 * KiB }, { "ve", 0x01c0e000, 4 * KiB }, - { "mmc0", 0x01c0f000, 4 * KiB }, { "mmc1", 0x01c10000, 4 * KiB }, { "mmc2", 0x01c11000, 4 * KiB }, { "crypto", 0x01c15000, 4 * KiB }, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_UART3 = 3, AW_H3_GIC_SPI_TIMER0 = 18, AW_H3_GIC_SPI_TIMER1 = 19, + AW_H3_GIC_SPI_MMC0 = 60, AW_H3_GIC_SPI_EHCI0 = 72, AW_H3_GIC_SPI_OHCI0 = 73, AW_H3_GIC_SPI_EHCI1 = 74, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) TYPE_AW_SID); object_property_add_alias(obj, "identifier", OBJECT(&s->sid), "identifier", &error_abort); + + sysbus_init_child_obj(obj, "mmc0", &s->mmc0, sizeof(s->mmc0), + TYPE_AW_SDHOST_SUN5I); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_init_nofail(DEVICE(&s->sid)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->sid), 0, s->memmap[AW_H3_SID]); + /* SD/MMC */ + qdev_init_nofail(DEVICE(&s->mmc0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc0), 0, s->memmap[AW_H3_MMC0]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_MMC0)); + + object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->mmc0), + "sd-bus", &error_abort); + /* Universal Serial Bus */ sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], qdev_get_gpio_in(DEVICE(&s->gic), diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/sysbus.h" #include "hw/boards.h" +#include "hw/qdev-properties.h" #include "hw/arm/allwinner-a10.h" static struct arm_boot_info cubieboard_binfo = { @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) { AwA10State *a10; Error *err = NULL; + DriveInfo *di; + BlockBackend *blk; + BusState *bus; + DeviceState *carddev; /* BIOS is not supported by this board */ if (bios_name) { @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) exit(1); } + /* Retrieve SD bus */ + di = drive_get_next(IF_SD); + blk = di ? blk_by_legacy_dinfo(di) : NULL; + bus = qdev_get_child_bus(DEVICE(a10), "sd-bus"); + + /* Plug in SD card */ + carddev = qdev_create(bus, TYPE_SD_CARD); + qdev_prop_set_drive(carddev, "drive", blk, &error_fatal); + object_property_set_bool(OBJECT(carddev), true, "realized", &error_fatal); + memory_region_add_subregion(get_system_memory(), AW_A10_SDRAM_BASE, machine->ram); diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/orangepi.c +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info orangepi_binfo = { static void orangepi_init(MachineState *machine) { AwH3State *h3; + DriveInfo *di; + BlockBackend *blk; + BusState *bus; + DeviceState *carddev; /* BIOS is not supported by this board */ if (bios_name) { @@ -XXX,XX +XXX,XX @@ static void orangepi_init(MachineState *machine) /* Mark H3 object realized */ object_property_set_bool(OBJECT(h3), true, "realized", &error_abort); + /* Retrieve SD bus */ + di = drive_get_next(IF_SD); + blk = di ? blk_by_legacy_dinfo(di) : NULL; + bus = qdev_get_child_bus(DEVICE(h3), "sd-bus"); + + /* Plug in SD card */ + carddev = qdev_create(bus, TYPE_SD_CARD); + qdev_prop_set_drive(carddev, "drive", blk, &error_fatal); + object_property_set_bool(OBJECT(carddev), true, "realized", &error_fatal); + /* SDRAM */ memory_region_add_subregion(get_system_memory(), h3->memmap[AW_H3_SDRAM], machine->ram); @@ -XXX,XX +XXX,XX @@ static void orangepi_machine_init(MachineClass *mc) { mc->desc = "Orange Pi PC"; mc->init = orangepi_init; + mc->block_default_type = IF_SD; + mc->units_per_default_bus = 1; mc->min_cpus = AW_H3_NUM_CPUS; mc->max_cpus = AW_H3_NUM_CPUS; mc->default_cpus = AW_H3_NUM_CPUS; diff --git a/hw/sd/allwinner-sdhost.c b/hw/sd/allwinner-sdhost.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/sd/allwinner-sdhost.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner (sun4i and above) SD Host Controller emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "sysemu/blockdev.h" +#include "hw/irq.h" +#include "hw/sd/allwinner-sdhost.h" +#include "migration/vmstate.h" +#include "trace.h" + +#define TYPE_AW_SDHOST_BUS "allwinner-sdhost-bus" +#define AW_SDHOST_BUS(obj) \ + OBJECT_CHECK(SDBus, (obj), TYPE_AW_SDHOST_BUS) + +/* SD Host register offsets */ +enum { + REG_SD_GCTL = 0x00, /* Global Control */ + REG_SD_CKCR = 0x04, /* Clock Control */ + REG_SD_TMOR = 0x08, /* Timeout */ + REG_SD_BWDR = 0x0C, /* Bus Width */ + REG_SD_BKSR = 0x10, /* Block Size */ + REG_SD_BYCR = 0x14, /* Byte Count */ + REG_SD_CMDR = 0x18, /* Command */ + REG_SD_CAGR = 0x1C, /* Command Argument */ + REG_SD_RESP0 = 0x20, /* Response Zero */ + REG_SD_RESP1 = 0x24, /* Response One */ + REG_SD_RESP2 = 0x28, /* Response Two */ + REG_SD_RESP3 = 0x2C, /* Response Three */ + REG_SD_IMKR = 0x30, /* Interrupt Mask */ + REG_SD_MISR = 0x34, /* Masked Interrupt Status */ + REG_SD_RISR = 0x38, /* Raw Interrupt Status */ + REG_SD_STAR = 0x3C, /* Status */ + REG_SD_FWLR = 0x40, /* FIFO Water Level */ + REG_SD_FUNS = 0x44, /* FIFO Function Select */ + REG_SD_DBGC = 0x50, /* Debug Enable */ + REG_SD_A12A = 0x58, /* Auto command 12 argument */ + REG_SD_NTSR = 0x5C, /* SD NewTiming Set */ + REG_SD_SDBG = 0x60, /* SD newTiming Set Debug */ + REG_SD_HWRST = 0x78, /* Hardware Reset Register */ + REG_SD_DMAC = 0x80, /* Internal DMA Controller Control */ + REG_SD_DLBA = 0x84, /* Descriptor List Base Address */ + REG_SD_IDST = 0x88, /* Internal DMA Controller Status */ + REG_SD_IDIE = 0x8C, /* Internal DMA Controller IRQ Enable */ + REG_SD_THLDC = 0x100, /* Card Threshold Control */ + REG_SD_DSBD = 0x10C, /* eMMC DDR Start Bit Detection Control */ + REG_SD_RES_CRC = 0x110, /* Response CRC from card/eMMC */ + REG_SD_DATA7_CRC = 0x114, /* CRC Data 7 from card/eMMC */ + REG_SD_DATA6_CRC = 0x118, /* CRC Data 6 from card/eMMC */ + REG_SD_DATA5_CRC = 0x11C, /* CRC Data 5 from card/eMMC */ + REG_SD_DATA4_CRC = 0x120, /* CRC Data 4 from card/eMMC */ + REG_SD_DATA3_CRC = 0x124, /* CRC Data 3 from card/eMMC */ + REG_SD_DATA2_CRC = 0x128, /* CRC Data 2 from card/eMMC */ + REG_SD_DATA1_CRC = 0x12C, /* CRC Data 1 from card/eMMC */ + REG_SD_DATA0_CRC = 0x130, /* CRC Data 0 from card/eMMC */ + REG_SD_CRC_STA = 0x134, /* CRC status from card/eMMC during write */ + REG_SD_FIFO = 0x200, /* Read/Write FIFO */ +}; + +/* SD Host register flags */ +enum { + SD_GCTL_FIFO_AC_MOD = (1 << 31), + SD_GCTL_DDR_MOD_SEL = (1 << 10), + SD_GCTL_CD_DBC_ENB = (1 << 8), + SD_GCTL_DMA_ENB = (1 << 5), + SD_GCTL_INT_ENB = (1 << 4), + SD_GCTL_DMA_RST = (1 << 2), + SD_GCTL_FIFO_RST = (1 << 1), + SD_GCTL_SOFT_RST = (1 << 0), +}; + +enum { + SD_CMDR_LOAD = (1 << 31), + SD_CMDR_CLKCHANGE = (1 << 21), + SD_CMDR_WRITE = (1 << 10), + SD_CMDR_AUTOSTOP = (1 << 12), + SD_CMDR_DATA = (1 << 9), + SD_CMDR_RESPONSE_LONG = (1 << 7), + SD_CMDR_RESPONSE = (1 << 6), + SD_CMDR_CMDID_MASK = (0x3f), +}; + +enum { + SD_RISR_CARD_REMOVE = (1 << 31), + SD_RISR_CARD_INSERT = (1 << 30), + SD_RISR_SDIO_INTR = (1 << 16), + SD_RISR_AUTOCMD_DONE = (1 << 14), + SD_RISR_DATA_COMPLETE = (1 << 3), + SD_RISR_CMD_COMPLETE = (1 << 2), + SD_RISR_NO_RESPONSE = (1 << 1), +}; + +enum { + SD_STAR_CARD_PRESENT = (1 << 8), +}; + +enum { + SD_IDST_INT_SUMMARY = (1 << 8), + SD_IDST_RECEIVE_IRQ = (1 << 1), + SD_IDST_TRANSMIT_IRQ = (1 << 0), + SD_IDST_IRQ_MASK = (1 << 1) | (1 << 0) | (1 << 8), + SD_IDST_WR_MASK = (0x3ff), +}; + +/* SD Host register reset values */ +enum { + REG_SD_GCTL_RST = 0x00000300, + REG_SD_CKCR_RST = 0x0, + REG_SD_TMOR_RST = 0xFFFFFF40, + REG_SD_BWDR_RST = 0x0, + REG_SD_BKSR_RST = 0x00000200, + REG_SD_BYCR_RST = 0x00000200, + REG_SD_CMDR_RST = 0x0, + REG_SD_CAGR_RST = 0x0, + REG_SD_RESP_RST = 0x0, + REG_SD_IMKR_RST = 0x0, + REG_SD_MISR_RST = 0x0, + REG_SD_RISR_RST = 0x0, + REG_SD_STAR_RST = 0x00000100, + REG_SD_FWLR_RST = 0x000F0000, + REG_SD_FUNS_RST = 0x0, + REG_SD_DBGC_RST = 0x0, + REG_SD_A12A_RST = 0x0000FFFF, + REG_SD_NTSR_RST = 0x00000001, + REG_SD_SDBG_RST = 0x0, + REG_SD_HWRST_RST = 0x00000001, + REG_SD_DMAC_RST = 0x0, + REG_SD_DLBA_RST = 0x0, + REG_SD_IDST_RST = 0x0, + REG_SD_IDIE_RST = 0x0, + REG_SD_THLDC_RST = 0x0, + REG_SD_DSBD_RST = 0x0, + REG_SD_RES_CRC_RST = 0x0, + REG_SD_DATA_CRC_RST = 0x0, + REG_SD_CRC_STA_RST = 0x0, + REG_SD_FIFO_RST = 0x0, +}; + +/* Data transfer descriptor for DMA */ +typedef struct TransferDescriptor { + uint32_t status; /* Status flags */ + uint32_t size; /* Data buffer size */ + uint32_t addr; /* Data buffer address */ + uint32_t next; /* Physical address of next descriptor */ +} TransferDescriptor; + +/* Data transfer descriptor flags */ +enum { + DESC_STATUS_HOLD = (1 << 31), /* Set when descriptor is in use by DMA */ + DESC_STATUS_ERROR = (1 << 30), /* Set when DMA transfer error occurred */ + DESC_STATUS_CHAIN = (1 << 4), /* Indicates chained descriptor. */ + DESC_STATUS_FIRST = (1 << 3), /* Set on the first descriptor */ + DESC_STATUS_LAST = (1 << 2), /* Set on the last descriptor */ + DESC_STATUS_NOIRQ = (1 << 1), /* Skip raising interrupt after transfer */ + DESC_SIZE_MASK = (0xfffffffc) +}; + +static void allwinner_sdhost_update_irq(AwSdHostState *s) +{ + uint32_t irq; + + if (s->global_ctl & SD_GCTL_INT_ENB) { + irq = s->irq_status & s->irq_mask; + } else { + irq = 0; + } + + trace_allwinner_sdhost_update_irq(irq); + qemu_set_irq(s->irq, irq); +} + +static void allwinner_sdhost_update_transfer_cnt(AwSdHostState *s, + uint32_t bytes) +{ + if (s->transfer_cnt > bytes) { + s->transfer_cnt -= bytes; + } else { + s->transfer_cnt = 0; + } + + if (!s->transfer_cnt) { + s->irq_status |= SD_RISR_DATA_COMPLETE; + } +} + +static void allwinner_sdhost_set_inserted(DeviceState *dev, bool inserted) +{ + AwSdHostState *s = AW_SDHOST(dev); + + trace_allwinner_sdhost_set_inserted(inserted); + + if (inserted) { + s->irq_status |= SD_RISR_CARD_INSERT; + s->irq_status &= ~SD_RISR_CARD_REMOVE; + s->status |= SD_STAR_CARD_PRESENT; + } else { + s->irq_status &= ~SD_RISR_CARD_INSERT; + s->irq_status |= SD_RISR_CARD_REMOVE; + s->status &= ~SD_STAR_CARD_PRESENT; + } + + allwinner_sdhost_update_irq(s); +} + +static void allwinner_sdhost_send_command(AwSdHostState *s) +{ + SDRequest request; + uint8_t resp[16]; + int rlen; + + /* Auto clear load flag */ + s->command &= ~SD_CMDR_LOAD; + + /* Clock change does not actually interact with the SD bus */ + if (!(s->command & SD_CMDR_CLKCHANGE)) { + + /* Prepare request */ + request.cmd = s->command & SD_CMDR_CMDID_MASK; + request.arg = s->command_arg; + + /* Send request to SD bus */ + rlen = sdbus_do_command(&s->sdbus, &request, resp); + if (rlen < 0) { + goto error; + } + + /* If the command has a response, store it in the response registers */ + if ((s->command & SD_CMDR_RESPONSE)) { + if (rlen == 4 && !(s->command & SD_CMDR_RESPONSE_LONG)) { + s->response[0] = ldl_be_p(&resp[0]); + s->response[1] = s->response[2] = s->response[3] = 0; + + } else if (rlen == 16 && (s->command & SD_CMDR_RESPONSE_LONG)) { + s->response[0] = ldl_be_p(&resp[12]); + s->response[1] = ldl_be_p(&resp[8]); + s->response[2] = ldl_be_p(&resp[4]); + s->response[3] = ldl_be_p(&resp[0]); + } else { + goto error; + } + } + } + + /* Set interrupt status bits */ + s->irq_status |= SD_RISR_CMD_COMPLETE; + return; + +error: + s->irq_status |= SD_RISR_NO_RESPONSE; +} + +static void allwinner_sdhost_auto_stop(AwSdHostState *s) +{ + /* + * The stop command (CMD12) ensures the SD bus + * returns to the transfer state. + */ + if ((s->command & SD_CMDR_AUTOSTOP) && (s->transfer_cnt == 0)) { + /* First save current command registers */ + uint32_t saved_cmd = s->command; + uint32_t saved_arg = s->command_arg; + + /* Prepare stop command (CMD12) */ + s->command &= ~SD_CMDR_CMDID_MASK; + s->command |= 12; /* CMD12 */ + s->command_arg = 0; + + /* Put the command on SD bus */ + allwinner_sdhost_send_command(s); + + /* Restore command values */ + s->command = saved_cmd; + s->command_arg = saved_arg; + + /* Set IRQ status bit for automatic stop done */ + s->irq_status |= SD_RISR_AUTOCMD_DONE; + } +} + +static uint32_t allwinner_sdhost_process_desc(AwSdHostState *s, + hwaddr desc_addr, + TransferDescriptor *desc, + bool is_write, uint32_t max_bytes) +{ + AwSdHostClass *klass = AW_SDHOST_GET_CLASS(s); + uint32_t num_done = 0; + uint32_t num_bytes = max_bytes; + uint8_t buf[1024]; + + /* Read descriptor */ + cpu_physical_memory_read(desc_addr, desc, sizeof(*desc)); + if (desc->size == 0) { + desc->size = klass->max_desc_size; + } else if (desc->size > klass->max_desc_size) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: DMA descriptor buffer size " + " is out-of-bounds: %" PRIu32 " > %zu", + __func__, desc->size, klass->max_desc_size); + desc->size = klass->max_desc_size; + } + if (desc->size < num_bytes) { + num_bytes = desc->size; + } + + trace_allwinner_sdhost_process_desc(desc_addr, desc->size, + is_write, max_bytes); + + while (num_done < num_bytes) { + /* Try to completely fill the local buffer */ + uint32_t buf_bytes = num_bytes - num_done; + if (buf_bytes > sizeof(buf)) { + buf_bytes = sizeof(buf); + } + + /* Write to SD bus */ + if (is_write) { + cpu_physical_memory_read((desc->addr & DESC_SIZE_MASK) + num_done, + buf, buf_bytes); + + for (uint32_t i = 0; i < buf_bytes; i++) { + sdbus_write_data(&s->sdbus, buf[i]); + } + + /* Read from SD bus */ + } else { + for (uint32_t i = 0; i < buf_bytes; i++) { + buf[i] = sdbus_read_data(&s->sdbus); + } + cpu_physical_memory_write((desc->addr & DESC_SIZE_MASK) + num_done, + buf, buf_bytes); + } + num_done += buf_bytes; + } + + /* Clear hold flag and flush descriptor */ + desc->status &= ~DESC_STATUS_HOLD; + cpu_physical_memory_write(desc_addr, desc, sizeof(*desc)); + + return num_done; +} + +static void allwinner_sdhost_dma(AwSdHostState *s) +{ + TransferDescriptor desc; + hwaddr desc_addr = s->desc_base; + bool is_write = (s->command & SD_CMDR_WRITE); + uint32_t bytes_done = 0; + + /* Check if DMA can be performed */ + if (s->byte_count == 0 || s->block_size == 0 || + !(s->global_ctl & SD_GCTL_DMA_ENB)) { + return; + } + + /* + * For read operations, data must be available on the SD bus + * If not, it is an error and we should not act at all + */ + if (!is_write && !sdbus_data_ready(&s->sdbus)) { + return; + } + + /* Process the DMA descriptors until all data is copied */ + while (s->byte_count > 0) { + bytes_done = allwinner_sdhost_process_desc(s, desc_addr, &desc, + is_write, s->byte_count); + allwinner_sdhost_update_transfer_cnt(s, bytes_done); + + if (bytes_done <= s->byte_count) { + s->byte_count -= bytes_done; + } else { + s->byte_count = 0; + } + + if (desc.status & DESC_STATUS_LAST) { + break; + } else { + desc_addr = desc.next; + } + } + + /* Raise IRQ to signal DMA is completed */ + s->irq_status |= SD_RISR_DATA_COMPLETE | SD_RISR_SDIO_INTR; + + /* Update DMAC bits */ + s->dmac_status |= SD_IDST_INT_SUMMARY; + + if (is_write) { + s->dmac_status |= SD_IDST_TRANSMIT_IRQ; + } else { + s->dmac_status |= SD_IDST_RECEIVE_IRQ; + } +} + +static uint64_t allwinner_sdhost_read(void *opaque, hwaddr offset, + unsigned size) +{ + AwSdHostState *s = AW_SDHOST(opaque); + uint32_t res = 0; + + switch (offset) { + case REG_SD_GCTL: /* Global Control */ + res = s->global_ctl; + break; + case REG_SD_CKCR: /* Clock Control */ + res = s->clock_ctl; + break; + case REG_SD_TMOR: /* Timeout */ + res = s->timeout; + break; + case REG_SD_BWDR: /* Bus Width */ + res = s->bus_width; + break; + case REG_SD_BKSR: /* Block Size */ + res = s->block_size; + break; + case REG_SD_BYCR: /* Byte Count */ + res = s->byte_count; + break; + case REG_SD_CMDR: /* Command */ + res = s->command; + break; + case REG_SD_CAGR: /* Command Argument */ + res = s->command_arg; + break; + case REG_SD_RESP0: /* Response Zero */ + res = s->response[0]; + break; + case REG_SD_RESP1: /* Response One */ + res = s->response[1]; + break; + case REG_SD_RESP2: /* Response Two */ + res = s->response[2]; + break; + case REG_SD_RESP3: /* Response Three */ + res = s->response[3]; + break; + case REG_SD_IMKR: /* Interrupt Mask */ + res = s->irq_mask; + break; + case REG_SD_MISR: /* Masked Interrupt Status */ + res = s->irq_status & s->irq_mask; + break; + case REG_SD_RISR: /* Raw Interrupt Status */ + res = s->irq_status; + break; + case REG_SD_STAR: /* Status */ + res = s->status; + break; + case REG_SD_FWLR: /* FIFO Water Level */ + res = s->fifo_wlevel; + break; + case REG_SD_FUNS: /* FIFO Function Select */ + res = s->fifo_func_sel; + break; + case REG_SD_DBGC: /* Debug Enable */ + res = s->debug_enable; + break; + case REG_SD_A12A: /* Auto command 12 argument */ + res = s->auto12_arg; + break; + case REG_SD_NTSR: /* SD NewTiming Set */ + res = s->newtiming_set; + break; + case REG_SD_SDBG: /* SD newTiming Set Debug */ + res = s->newtiming_debug; + break; + case REG_SD_HWRST: /* Hardware Reset Register */ + res = s->hardware_rst; + break; + case REG_SD_DMAC: /* Internal DMA Controller Control */ + res = s->dmac; + break; + case REG_SD_DLBA: /* Descriptor List Base Address */ + res = s->desc_base; + break; + case REG_SD_IDST: /* Internal DMA Controller Status */ + res = s->dmac_status; + break; + case REG_SD_IDIE: /* Internal DMA Controller Interrupt Enable */ + res = s->dmac_irq; + break; + case REG_SD_THLDC: /* Card Threshold Control */ + res = s->card_threshold; + break; + case REG_SD_DSBD: /* eMMC DDR Start Bit Detection Control */ + res = s->startbit_detect; + break; + case REG_SD_RES_CRC: /* Response CRC from card/eMMC */ + res = s->response_crc; + break; + case REG_SD_DATA7_CRC: /* CRC Data 7 from card/eMMC */ + case REG_SD_DATA6_CRC: /* CRC Data 6 from card/eMMC */ + case REG_SD_DATA5_CRC: /* CRC Data 5 from card/eMMC */ + case REG_SD_DATA4_CRC: /* CRC Data 4 from card/eMMC */ + case REG_SD_DATA3_CRC: /* CRC Data 3 from card/eMMC */ + case REG_SD_DATA2_CRC: /* CRC Data 2 from card/eMMC */ + case REG_SD_DATA1_CRC: /* CRC Data 1 from card/eMMC */ + case REG_SD_DATA0_CRC: /* CRC Data 0 from card/eMMC */ + res = s->data_crc[((offset - REG_SD_DATA7_CRC) / sizeof(uint32_t))]; + break; + case REG_SD_CRC_STA: /* CRC status from card/eMMC in write operation */ + res = s->status_crc; + break; + case REG_SD_FIFO: /* Read/Write FIFO */ + if (sdbus_data_ready(&s->sdbus)) { + res = sdbus_read_data(&s->sdbus); + res |= sdbus_read_data(&s->sdbus) << 8; + res |= sdbus_read_data(&s->sdbus) << 16; + res |= sdbus_read_data(&s->sdbus) << 24; + allwinner_sdhost_update_transfer_cnt(s, sizeof(uint32_t)); + allwinner_sdhost_auto_stop(s); + allwinner_sdhost_update_irq(s); + } else { + qemu_log_mask(LOG_GUEST_ERROR, "%s: no data ready on SD bus\n", + __func__); + } + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset %" + HWADDR_PRIx"\n", __func__, offset); + res = 0; + break; + } + + trace_allwinner_sdhost_read(offset, res, size); + return res; +} + +static void allwinner_sdhost_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AwSdHostState *s = AW_SDHOST(opaque); + + trace_allwinner_sdhost_write(offset, value, size); + + switch (offset) { + case REG_SD_GCTL: /* Global Control */ + s->global_ctl = value; + s->global_ctl &= ~(SD_GCTL_DMA_RST | SD_GCTL_FIFO_RST | + SD_GCTL_SOFT_RST); + allwinner_sdhost_update_irq(s); + break; + case REG_SD_CKCR: /* Clock Control */ + s->clock_ctl = value; + break; + case REG_SD_TMOR: /* Timeout */ + s->timeout = value; + break; + case REG_SD_BWDR: /* Bus Width */ + s->bus_width = value; + break; + case REG_SD_BKSR: /* Block Size */ + s->block_size = value; + break; + case REG_SD_BYCR: /* Byte Count */ + s->byte_count = value; + s->transfer_cnt = value; + break; + case REG_SD_CMDR: /* Command */ + s->command = value; + if (value & SD_CMDR_LOAD) { + allwinner_sdhost_send_command(s); + allwinner_sdhost_dma(s); + allwinner_sdhost_auto_stop(s); + } + allwinner_sdhost_update_irq(s); + break; + case REG_SD_CAGR: /* Command Argument */ + s->command_arg = value; + break; + case REG_SD_RESP0: /* Response Zero */ + s->response[0] = value; + break; + case REG_SD_RESP1: /* Response One */ + s->response[1] = value; + break; + case REG_SD_RESP2: /* Response Two */ + s->response[2] = value; + break; + case REG_SD_RESP3: /* Response Three */ + s->response[3] = value; + break; + case REG_SD_IMKR: /* Interrupt Mask */ + s->irq_mask = value; + allwinner_sdhost_update_irq(s); + break; + case REG_SD_MISR: /* Masked Interrupt Status */ + case REG_SD_RISR: /* Raw Interrupt Status */ + s->irq_status &= ~value; + allwinner_sdhost_update_irq(s); + break; + case REG_SD_STAR: /* Status */ + s->status &= ~value; + allwinner_sdhost_update_irq(s); + break; + case REG_SD_FWLR: /* FIFO Water Level */ + s->fifo_wlevel = value; + break; + case REG_SD_FUNS: /* FIFO Function Select */ + s->fifo_func_sel = value; + break; + case REG_SD_DBGC: /* Debug Enable */ + s->debug_enable = value; + break; + case REG_SD_A12A: /* Auto command 12 argument */ + s->auto12_arg = value; + break; + case REG_SD_NTSR: /* SD NewTiming Set */ + s->newtiming_set = value; + break; + case REG_SD_SDBG: /* SD newTiming Set Debug */ + s->newtiming_debug = value; + break; + case REG_SD_HWRST: /* Hardware Reset Register */ + s->hardware_rst = value; + break; + case REG_SD_DMAC: /* Internal DMA Controller Control */ + s->dmac = value; + allwinner_sdhost_update_irq(s); + break; + case REG_SD_DLBA: /* Descriptor List Base Address */ + s->desc_base = value; + break; + case REG_SD_IDST: /* Internal DMA Controller Status */ + s->dmac_status &= (~SD_IDST_WR_MASK) | (~value & SD_IDST_WR_MASK); + allwinner_sdhost_update_irq(s); + break; + case REG_SD_IDIE: /* Internal DMA Controller Interrupt Enable */ + s->dmac_irq = value; + allwinner_sdhost_update_irq(s); + break; + case REG_SD_THLDC: /* Card Threshold Control */ + s->card_threshold = value; + break; + case REG_SD_DSBD: /* eMMC DDR Start Bit Detection Control */ + s->startbit_detect = value; + break; + case REG_SD_FIFO: /* Read/Write FIFO */ + sdbus_write_data(&s->sdbus, value & 0xff); + sdbus_write_data(&s->sdbus, (value >> 8) & 0xff); + sdbus_write_data(&s->sdbus, (value >> 16) & 0xff); + sdbus_write_data(&s->sdbus, (value >> 24) & 0xff); + allwinner_sdhost_update_transfer_cnt(s, sizeof(uint32_t)); + allwinner_sdhost_auto_stop(s); + allwinner_sdhost_update_irq(s); + break; + case REG_SD_RES_CRC: /* Response CRC from card/eMMC */ + case REG_SD_DATA7_CRC: /* CRC Data 7 from card/eMMC */ + case REG_SD_DATA6_CRC: /* CRC Data 6 from card/eMMC */ + case REG_SD_DATA5_CRC: /* CRC Data 5 from card/eMMC */ + case REG_SD_DATA4_CRC: /* CRC Data 4 from card/eMMC */ + case REG_SD_DATA3_CRC: /* CRC Data 3 from card/eMMC */ + case REG_SD_DATA2_CRC: /* CRC Data 2 from card/eMMC */ + case REG_SD_DATA1_CRC: /* CRC Data 1 from card/eMMC */ + case REG_SD_DATA0_CRC: /* CRC Data 0 from card/eMMC */ + case REG_SD_CRC_STA: /* CRC status from card/eMMC in write operation */ + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset %" + HWADDR_PRIx"\n", __func__, offset); + break; + } +} + +static const MemoryRegionOps allwinner_sdhost_ops = { + .read = allwinner_sdhost_read, + .write = allwinner_sdhost_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static const VMStateDescription vmstate_allwinner_sdhost = { + .name = "allwinner-sdhost", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(global_ctl, AwSdHostState), + VMSTATE_UINT32(clock_ctl, AwSdHostState), + VMSTATE_UINT32(timeout, AwSdHostState), + VMSTATE_UINT32(bus_width, AwSdHostState), + VMSTATE_UINT32(block_size, AwSdHostState), + VMSTATE_UINT32(byte_count, AwSdHostState), + VMSTATE_UINT32(transfer_cnt, AwSdHostState), + VMSTATE_UINT32(command, AwSdHostState), + VMSTATE_UINT32(command_arg, AwSdHostState), + VMSTATE_UINT32_ARRAY(response, AwSdHostState, 4), + VMSTATE_UINT32(irq_mask, AwSdHostState), + VMSTATE_UINT32(irq_status, AwSdHostState), + VMSTATE_UINT32(status, AwSdHostState), + VMSTATE_UINT32(fifo_wlevel, AwSdHostState), + VMSTATE_UINT32(fifo_func_sel, AwSdHostState), + VMSTATE_UINT32(debug_enable, AwSdHostState), + VMSTATE_UINT32(auto12_arg, AwSdHostState), + VMSTATE_UINT32(newtiming_set, AwSdHostState), + VMSTATE_UINT32(newtiming_debug, AwSdHostState), + VMSTATE_UINT32(hardware_rst, AwSdHostState), + VMSTATE_UINT32(dmac, AwSdHostState), + VMSTATE_UINT32(desc_base, AwSdHostState), + VMSTATE_UINT32(dmac_status, AwSdHostState), + VMSTATE_UINT32(dmac_irq, AwSdHostState), + VMSTATE_UINT32(card_threshold, AwSdHostState), + VMSTATE_UINT32(startbit_detect, AwSdHostState), + VMSTATE_UINT32(response_crc, AwSdHostState), + VMSTATE_UINT32_ARRAY(data_crc, AwSdHostState, 8), + VMSTATE_UINT32(status_crc, AwSdHostState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_sdhost_init(Object *obj) +{ + AwSdHostState *s = AW_SDHOST(obj); + + qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), + TYPE_AW_SDHOST_BUS, DEVICE(s), "sd-bus"); + + memory_region_init_io(&s->iomem, obj, &allwinner_sdhost_ops, s, + TYPE_AW_SDHOST, 4 * KiB); + sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(s), &s->irq); +} + +static void allwinner_sdhost_reset(DeviceState *dev) +{ + AwSdHostState *s = AW_SDHOST(dev); + + s->global_ctl = REG_SD_GCTL_RST; + s->clock_ctl = REG_SD_CKCR_RST; + s->timeout = REG_SD_TMOR_RST; + s->bus_width = REG_SD_BWDR_RST; + s->block_size = REG_SD_BKSR_RST; + s->byte_count = REG_SD_BYCR_RST; + s->transfer_cnt = 0; + + s->command = REG_SD_CMDR_RST; + s->command_arg = REG_SD_CAGR_RST; + + for (int i = 0; i < ARRAY_SIZE(s->response); i++) { + s->response[i] = REG_SD_RESP_RST; + } + + s->irq_mask = REG_SD_IMKR_RST; + s->irq_status = REG_SD_RISR_RST; + s->status = REG_SD_STAR_RST; + + s->fifo_wlevel = REG_SD_FWLR_RST; + s->fifo_func_sel = REG_SD_FUNS_RST; + s->debug_enable = REG_SD_DBGC_RST; + s->auto12_arg = REG_SD_A12A_RST; + s->newtiming_set = REG_SD_NTSR_RST; + s->newtiming_debug = REG_SD_SDBG_RST; + s->hardware_rst = REG_SD_HWRST_RST; + s->dmac = REG_SD_DMAC_RST; + s->desc_base = REG_SD_DLBA_RST; + s->dmac_status = REG_SD_IDST_RST; + s->dmac_irq = REG_SD_IDIE_RST; + s->card_threshold = REG_SD_THLDC_RST; + s->startbit_detect = REG_SD_DSBD_RST; + s->response_crc = REG_SD_RES_CRC_RST; + + for (int i = 0; i < ARRAY_SIZE(s->data_crc); i++) { + s->data_crc[i] = REG_SD_DATA_CRC_RST; + } + + s->status_crc = REG_SD_CRC_STA_RST; +} + +static void allwinner_sdhost_bus_class_init(ObjectClass *klass, void *data) +{ + SDBusClass *sbc = SD_BUS_CLASS(klass); + + sbc->set_inserted = allwinner_sdhost_set_inserted; +} + +static void allwinner_sdhost_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_sdhost_reset; + dc->vmsd = &vmstate_allwinner_sdhost; +} + +static void allwinner_sdhost_sun4i_class_init(ObjectClass *klass, void *data) +{ + AwSdHostClass *sc = AW_SDHOST_CLASS(klass); + sc->max_desc_size = 8 * KiB; +} + +static void allwinner_sdhost_sun5i_class_init(ObjectClass *klass, void *data) +{ + AwSdHostClass *sc = AW_SDHOST_CLASS(klass); + sc->max_desc_size = 64 * KiB; +} + +static TypeInfo allwinner_sdhost_info = { + .name = TYPE_AW_SDHOST, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_sdhost_init, + .instance_size = sizeof(AwSdHostState), + .class_init = allwinner_sdhost_class_init, + .class_size = sizeof(AwSdHostClass), + .abstract = true, +}; + +static const TypeInfo allwinner_sdhost_sun4i_info = { + .name = TYPE_AW_SDHOST_SUN4I, + .parent = TYPE_AW_SDHOST, + .class_init = allwinner_sdhost_sun4i_class_init, +}; + +static const TypeInfo allwinner_sdhost_sun5i_info = { + .name = TYPE_AW_SDHOST_SUN5I, + .parent = TYPE_AW_SDHOST, + .class_init = allwinner_sdhost_sun5i_class_init, +}; + +static const TypeInfo allwinner_sdhost_bus_info = { + .name = TYPE_AW_SDHOST_BUS, + .parent = TYPE_SD_BUS, + .instance_size = sizeof(SDBus), + .class_init = allwinner_sdhost_bus_class_init, +}; + +static void allwinner_sdhost_register_types(void) +{ + type_register_static(&allwinner_sdhost_info); + type_register_static(&allwinner_sdhost_sun4i_info); + type_register_static(&allwinner_sdhost_sun5i_info); + type_register_static(&allwinner_sdhost_bus_info); +} + +type_init(allwinner_sdhost_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_H3 select UNIMP select USB_OHCI select USB_EHCI_SYSBUS + select SD config RASPI bool diff --git a/hw/sd/trace-events b/hw/sd/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/trace-events +++ b/hw/sd/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# allwinner-sdhost.c +allwinner_sdhost_set_inserted(bool inserted) "inserted %u" +allwinner_sdhost_process_desc(uint64_t desc_addr, uint32_t desc_size, bool is_write, uint32_t max_bytes) "desc_addr 0x%" PRIx64 " desc_size %" PRIu32 " is_write %u max_bytes %" PRIu32 +allwinner_sdhost_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_sdhost_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_sdhost_update_irq(uint32_t irq) "IRQ bits 0x%" PRIx32 + # bcm2835_sdhost.c bcm2835_sdhost_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" bcm2835_sdhost_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Allwinner Sun8i System on Chip family includes an Ethernet MAC (EMAC) which provides 10M/100M/1000M Ethernet connectivity. This commit adds support for the Allwinner EMAC from the Sun8i family (H2+, H3, A33, etc), including emulation for the following functionality: * DMA transfers * MII interface * Transmit CRC calculation Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-10-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 3 + include/hw/net/allwinner-sun8i-emac.h | 99 +++ hw/arm/allwinner-h3.c | 16 +- hw/arm/orangepi.c | 3 + hw/net/allwinner-sun8i-emac.c | 871 ++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/net/Kconfig | 3 + hw/net/trace-events | 10 + 9 files changed, 1006 insertions(+), 1 deletion(-) create mode 100644 include/hw/net/allwinner-sun8i-emac.h create mode 100644 hw/net/allwinner-sun8i-emac.c diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Makefile.objs +++ b/hw/net/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XGMAC) += xgmac.o common-obj-$(CONFIG_MIPSNET) += mipsnet.o common-obj-$(CONFIG_XILINX_AXI) += xilinx_axienet.o common-obj-$(CONFIG_ALLWINNER_EMAC) += allwinner_emac.o +common-obj-$(CONFIG_ALLWINNER_SUN8I_EMAC) += allwinner-sun8i-emac.o common-obj-$(CONFIG_IMX_FEC) += imx_fec.o common-obj-$(CONFIG_CADENCE) += cadence_gem.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-h3-sysctrl.h" #include "hw/misc/allwinner-sid.h" #include "hw/sd/allwinner-sdhost.h" +#include "hw/net/allwinner-sun8i-emac.h" #include "target/arm/cpu.h" /** @@ -XXX,XX +XXX,XX @@ enum { AW_H3_UART1, AW_H3_UART2, AW_H3_UART3, + AW_H3_EMAC, AW_H3_GIC_DIST, AW_H3_GIC_CPU, AW_H3_GIC_HYP, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { AwH3SysCtrlState sysctrl; AwSidState sid; AwSdHostState mmc0; + AwSun8iEmacState emac; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/net/allwinner-sun8i-emac.h b/include/hw/net/allwinner-sun8i-emac.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/allwinner-sun8i-emac.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Sun8i Ethernet MAC emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_NET_ALLWINNER_SUN8I_EMAC_H +#define HW_NET_ALLWINNER_SUN8I_EMAC_H + +#include "qom/object.h" +#include "net/net.h" +#include "hw/sysbus.h" + +/** + * Object model + * @{ + */ + +#define TYPE_AW_SUN8I_EMAC "allwinner-sun8i-emac" +#define AW_SUN8I_EMAC(obj) \ + OBJECT_CHECK(AwSun8iEmacState, (obj), TYPE_AW_SUN8I_EMAC) + +/** @} */ + +/** + * Allwinner Sun8i EMAC object instance state + */ +typedef struct AwSun8iEmacState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Interrupt output signal to notify CPU */ + qemu_irq irq; + + /** Generic Network Interface Controller (NIC) for networking API */ + NICState *nic; + + /** Generic Network Interface Controller (NIC) configuration */ + NICConf conf; + + /** + * @name Media Independent Interface (MII) + * @{ + */ + + uint8_t mii_phy_addr; /**< PHY address */ + uint32_t mii_cr; /**< Control */ + uint32_t mii_st; /**< Status */ + uint32_t mii_adv; /**< Advertised Abilities */ + + /** @} */ + + /** + * @name Hardware Registers + * @{ + */ + + uint32_t basic_ctl0; /**< Basic Control 0 */ + uint32_t basic_ctl1; /**< Basic Control 1 */ + uint32_t int_en; /**< Interrupt Enable */ + uint32_t int_sta; /**< Interrupt Status */ + uint32_t frm_flt; /**< Receive Frame Filter */ + + uint32_t rx_ctl0; /**< Receive Control 0 */ + uint32_t rx_ctl1; /**< Receive Control 1 */ + uint32_t rx_desc_head; /**< Receive Descriptor List Address */ + uint32_t rx_desc_curr; /**< Current Receive Descriptor Address */ + + uint32_t tx_ctl0; /**< Transmit Control 0 */ + uint32_t tx_ctl1; /**< Transmit Control 1 */ + uint32_t tx_desc_head; /**< Transmit Descriptor List Address */ + uint32_t tx_desc_curr; /**< Current Transmit Descriptor Address */ + uint32_t tx_flowctl; /**< Transmit Flow Control */ + + uint32_t mii_cmd; /**< Management Interface Command */ + uint32_t mii_data; /**< Management Interface Data */ + + /** @} */ + +} AwSun8iEmacState; + +#endif /* HW_NET_ALLWINNER_SUN8I_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_UART1] = 0x01c28400, [AW_H3_UART2] = 0x01c28800, [AW_H3_UART3] = 0x01c28c00, + [AW_H3_EMAC] = 0x01c30000, [AW_H3_GIC_DIST] = 0x01c81000, [AW_H3_GIC_CPU] = 0x01c82000, [AW_H3_GIC_HYP] = 0x01c84000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "twi1", 0x01c2b000, 1 * KiB }, { "twi2", 0x01c2b400, 1 * KiB }, { "scr", 0x01c2c400, 1 * KiB }, - { "emac", 0x01c30000, 64 * KiB }, { "gpu", 0x01c40000, 64 * KiB }, { "hstmr", 0x01c60000, 4 * KiB }, { "dramcom", 0x01c62000, 4 * KiB }, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_OHCI2 = 77, AW_H3_GIC_SPI_EHCI3 = 78, AW_H3_GIC_SPI_OHCI3 = 79, + AW_H3_GIC_SPI_EMAC = 82 }; /* Allwinner H3 general constants */ @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) sysbus_init_child_obj(obj, "mmc0", &s->mmc0, sizeof(s->mmc0), TYPE_AW_SDHOST_SUN5I); + + sysbus_init_child_obj(obj, "emac", &s->emac, sizeof(s->emac), + TYPE_AW_SUN8I_EMAC); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->mmc0), "sd-bus", &error_abort); + /* EMAC */ + if (nd_table[0].used) { + qemu_check_nic_model(&nd_table[0], TYPE_AW_SUN8I_EMAC); + qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]); + } + qdev_init_nofail(DEVICE(&s->emac)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->emac), 0, s->memmap[AW_H3_EMAC]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->emac), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_EMAC)); + /* Universal Serial Bus */ sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], qdev_get_gpio_in(DEVICE(&s->gic), diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/orangepi.c +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ static void orangepi_init(MachineState *machine) warn_report("Security Identifier value does not include H3 prefix"); } + /* Setup EMAC properties */ + object_property_set_int(OBJECT(&h3->emac), 1, "phy-addr", &error_abort); + /* Mark H3 object realized */ object_property_set_bool(OBJECT(h3), true, "realized", &error_abort); diff --git a/hw/net/allwinner-sun8i-emac.c b/hw/net/allwinner-sun8i-emac.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/allwinner-sun8i-emac.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Sun8i Ethernet MAC emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "net/net.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "qemu/log.h" +#include "trace.h" +#include "net/checksum.h" +#include "qemu/module.h" +#include "exec/cpu-common.h" +#include "hw/net/allwinner-sun8i-emac.h" + +/* EMAC register offsets */ +enum { + REG_BASIC_CTL_0 = 0x0000, /* Basic Control 0 */ + REG_BASIC_CTL_1 = 0x0004, /* Basic Control 1 */ + REG_INT_STA = 0x0008, /* Interrupt Status */ + REG_INT_EN = 0x000C, /* Interrupt Enable */ + REG_TX_CTL_0 = 0x0010, /* Transmit Control 0 */ + REG_TX_CTL_1 = 0x0014, /* Transmit Control 1 */ + REG_TX_FLOW_CTL = 0x001C, /* Transmit Flow Control */ + REG_TX_DMA_DESC_LIST = 0x0020, /* Transmit Descriptor List Address */ + REG_RX_CTL_0 = 0x0024, /* Receive Control 0 */ + REG_RX_CTL_1 = 0x0028, /* Receive Control 1 */ + REG_RX_DMA_DESC_LIST = 0x0034, /* Receive Descriptor List Address */ + REG_FRM_FLT = 0x0038, /* Receive Frame Filter */ + REG_RX_HASH_0 = 0x0040, /* Receive Hash Table 0 */ + REG_RX_HASH_1 = 0x0044, /* Receive Hash Table 1 */ + REG_MII_CMD = 0x0048, /* Management Interface Command */ + REG_MII_DATA = 0x004C, /* Management Interface Data */ + REG_ADDR_HIGH = 0x0050, /* MAC Address High */ + REG_ADDR_LOW = 0x0054, /* MAC Address Low */ + REG_TX_DMA_STA = 0x00B0, /* Transmit DMA Status */ + REG_TX_CUR_DESC = 0x00B4, /* Transmit Current Descriptor */ + REG_TX_CUR_BUF = 0x00B8, /* Transmit Current Buffer */ + REG_RX_DMA_STA = 0x00C0, /* Receive DMA Status */ + REG_RX_CUR_DESC = 0x00C4, /* Receive Current Descriptor */ + REG_RX_CUR_BUF = 0x00C8, /* Receive Current Buffer */ + REG_RGMII_STA = 0x00D0, /* RGMII Status */ +}; + +/* EMAC register flags */ +enum { + BASIC_CTL0_100Mbps = (0b11 << 2), + BASIC_CTL0_FD = (1 << 0), + BASIC_CTL1_SOFTRST = (1 << 0), +}; + +enum { + INT_STA_RGMII_LINK = (1 << 16), + INT_STA_RX_EARLY = (1 << 13), + INT_STA_RX_OVERFLOW = (1 << 12), + INT_STA_RX_TIMEOUT = (1 << 11), + INT_STA_RX_DMA_STOP = (1 << 10), + INT_STA_RX_BUF_UA = (1 << 9), + INT_STA_RX = (1 << 8), + INT_STA_TX_EARLY = (1 << 5), + INT_STA_TX_UNDERFLOW = (1 << 4), + INT_STA_TX_TIMEOUT = (1 << 3), + INT_STA_TX_BUF_UA = (1 << 2), + INT_STA_TX_DMA_STOP = (1 << 1), + INT_STA_TX = (1 << 0), +}; + +enum { + INT_EN_RX_EARLY = (1 << 13), + INT_EN_RX_OVERFLOW = (1 << 12), + INT_EN_RX_TIMEOUT = (1 << 11), + INT_EN_RX_DMA_STOP = (1 << 10), + INT_EN_RX_BUF_UA = (1 << 9), + INT_EN_RX = (1 << 8), + INT_EN_TX_EARLY = (1 << 5), + INT_EN_TX_UNDERFLOW = (1 << 4), + INT_EN_TX_TIMEOUT = (1 << 3), + INT_EN_TX_BUF_UA = (1 << 2), + INT_EN_TX_DMA_STOP = (1 << 1), + INT_EN_TX = (1 << 0), +}; + +enum { + TX_CTL0_TX_EN = (1 << 31), + TX_CTL1_TX_DMA_START = (1 << 31), + TX_CTL1_TX_DMA_EN = (1 << 30), + TX_CTL1_TX_FLUSH = (1 << 0), +}; + +enum { + RX_CTL0_RX_EN = (1 << 31), + RX_CTL0_STRIP_FCS = (1 << 28), + RX_CTL0_CRC_IPV4 = (1 << 27), +}; + +enum { + RX_CTL1_RX_DMA_START = (1 << 31), + RX_CTL1_RX_DMA_EN = (1 << 30), + RX_CTL1_RX_MD = (1 << 1), +}; + +enum { + RX_FRM_FLT_DIS_ADDR = (1 << 31), +}; + +enum { + MII_CMD_PHY_ADDR_SHIFT = (12), + MII_CMD_PHY_ADDR_MASK = (0xf000), + MII_CMD_PHY_REG_SHIFT = (4), + MII_CMD_PHY_REG_MASK = (0xf0), + MII_CMD_PHY_RW = (1 << 1), + MII_CMD_PHY_BUSY = (1 << 0), +}; + +enum { + TX_DMA_STA_STOP = (0b000), + TX_DMA_STA_RUN_FETCH = (0b001), + TX_DMA_STA_WAIT_STA = (0b010), +}; + +enum { + RX_DMA_STA_STOP = (0b000), + RX_DMA_STA_RUN_FETCH = (0b001), + RX_DMA_STA_WAIT_FRM = (0b011), +}; + +/* EMAC register reset values */ +enum { + REG_BASIC_CTL_1_RST = 0x08000000, +}; + +/* EMAC constants */ +enum { + AW_SUN8I_EMAC_MIN_PKT_SZ = 64 +}; + +/* Transmit/receive frame descriptor */ +typedef struct FrameDescriptor { + uint32_t status; + uint32_t status2; + uint32_t addr; + uint32_t next; +} FrameDescriptor; + +/* Frame descriptor flags */ +enum { + DESC_STATUS_CTL = (1 << 31), + DESC_STATUS2_BUF_SIZE_MASK = (0x7ff), +}; + +/* Transmit frame descriptor flags */ +enum { + TX_DESC_STATUS_LENGTH_ERR = (1 << 14), + TX_DESC_STATUS2_FIRST_DESC = (1 << 29), + TX_DESC_STATUS2_LAST_DESC = (1 << 30), + TX_DESC_STATUS2_CHECKSUM_MASK = (0x3 << 27), +}; + +/* Receive frame descriptor flags */ +enum { + RX_DESC_STATUS_FIRST_DESC = (1 << 9), + RX_DESC_STATUS_LAST_DESC = (1 << 8), + RX_DESC_STATUS_FRM_LEN_MASK = (0x3fff0000), + RX_DESC_STATUS_FRM_LEN_SHIFT = (16), + RX_DESC_STATUS_NO_BUF = (1 << 14), + RX_DESC_STATUS_HEADER_ERR = (1 << 7), + RX_DESC_STATUS_LENGTH_ERR = (1 << 4), + RX_DESC_STATUS_CRC_ERR = (1 << 1), + RX_DESC_STATUS_PAYLOAD_ERR = (1 << 0), + RX_DESC_STATUS2_RX_INT_CTL = (1 << 31), +}; + +/* MII register offsets */ +enum { + MII_REG_CR = (0x0), /* Control */ + MII_REG_ST = (0x1), /* Status */ + MII_REG_ID_HIGH = (0x2), /* Identifier High */ + MII_REG_ID_LOW = (0x3), /* Identifier Low */ + MII_REG_ADV = (0x4), /* Advertised abilities */ + MII_REG_LPA = (0x5), /* Link partner abilities */ +}; + +/* MII register flags */ +enum { + MII_REG_CR_RESET = (1 << 15), + MII_REG_CR_POWERDOWN = (1 << 11), + MII_REG_CR_10Mbit = (0), + MII_REG_CR_100Mbit = (1 << 13), + MII_REG_CR_1000Mbit = (1 << 6), + MII_REG_CR_AUTO_NEG = (1 << 12), + MII_REG_CR_AUTO_NEG_RESTART = (1 << 9), + MII_REG_CR_FULLDUPLEX = (1 << 8), +}; + +enum { + MII_REG_ST_100BASE_T4 = (1 << 15), + MII_REG_ST_100BASE_X_FD = (1 << 14), + MII_REG_ST_100BASE_X_HD = (1 << 13), + MII_REG_ST_10_FD = (1 << 12), + MII_REG_ST_10_HD = (1 << 11), + MII_REG_ST_100BASE_T2_FD = (1 << 10), + MII_REG_ST_100BASE_T2_HD = (1 << 9), + MII_REG_ST_AUTONEG_COMPLETE = (1 << 5), + MII_REG_ST_AUTONEG_AVAIL = (1 << 3), + MII_REG_ST_LINK_UP = (1 << 2), +}; + +enum { + MII_REG_LPA_10_HD = (1 << 5), + MII_REG_LPA_10_FD = (1 << 6), + MII_REG_LPA_100_HD = (1 << 7), + MII_REG_LPA_100_FD = (1 << 8), + MII_REG_LPA_PAUSE = (1 << 10), + MII_REG_LPA_ASYMPAUSE = (1 << 11), +}; + +/* MII constants */ +enum { + MII_PHY_ID_HIGH = 0x0044, + MII_PHY_ID_LOW = 0x1400, +}; + +static void allwinner_sun8i_emac_mii_set_link(AwSun8iEmacState *s, + bool link_active) +{ + if (link_active) { + s->mii_st |= MII_REG_ST_LINK_UP; + } else { + s->mii_st &= ~MII_REG_ST_LINK_UP; + } +} + +static void allwinner_sun8i_emac_mii_reset(AwSun8iEmacState *s, + bool link_active) +{ + s->mii_cr = MII_REG_CR_100Mbit | MII_REG_CR_AUTO_NEG | + MII_REG_CR_FULLDUPLEX; + s->mii_st = MII_REG_ST_100BASE_T4 | MII_REG_ST_100BASE_X_FD | + MII_REG_ST_100BASE_X_HD | MII_REG_ST_10_FD | MII_REG_ST_10_HD | + MII_REG_ST_100BASE_T2_FD | MII_REG_ST_100BASE_T2_HD | + MII_REG_ST_AUTONEG_COMPLETE | MII_REG_ST_AUTONEG_AVAIL; + s->mii_adv = 0; + + allwinner_sun8i_emac_mii_set_link(s, link_active); +} + +static void allwinner_sun8i_emac_mii_cmd(AwSun8iEmacState *s) +{ + uint8_t addr, reg; + + addr = (s->mii_cmd & MII_CMD_PHY_ADDR_MASK) >> MII_CMD_PHY_ADDR_SHIFT; + reg = (s->mii_cmd & MII_CMD_PHY_REG_MASK) >> MII_CMD_PHY_REG_SHIFT; + + if (addr != s->mii_phy_addr) { + return; + } + + /* Read or write a PHY register? */ + if (s->mii_cmd & MII_CMD_PHY_RW) { + trace_allwinner_sun8i_emac_mii_write_reg(reg, s->mii_data); + + switch (reg) { + case MII_REG_CR: + if (s->mii_data & MII_REG_CR_RESET) { + allwinner_sun8i_emac_mii_reset(s, s->mii_st & + MII_REG_ST_LINK_UP); + } else { + s->mii_cr = s->mii_data & ~(MII_REG_CR_RESET | + MII_REG_CR_AUTO_NEG_RESTART); + } + break; + case MII_REG_ADV: + s->mii_adv = s->mii_data; + break; + case MII_REG_ID_HIGH: + case MII_REG_ID_LOW: + case MII_REG_LPA: + break; + default: + qemu_log_mask(LOG_UNIMP, "allwinner-h3-emac: write access to " + "unknown MII register 0x%x\n", reg); + break; + } + } else { + switch (reg) { + case MII_REG_CR: + s->mii_data = s->mii_cr; + break; + case MII_REG_ST: + s->mii_data = s->mii_st; + break; + case MII_REG_ID_HIGH: + s->mii_data = MII_PHY_ID_HIGH; + break; + case MII_REG_ID_LOW: + s->mii_data = MII_PHY_ID_LOW; + break; + case MII_REG_ADV: + s->mii_data = s->mii_adv; + break; + case MII_REG_LPA: + s->mii_data = MII_REG_LPA_10_HD | MII_REG_LPA_10_FD | + MII_REG_LPA_100_HD | MII_REG_LPA_100_FD | + MII_REG_LPA_PAUSE | MII_REG_LPA_ASYMPAUSE; + break; + default: + qemu_log_mask(LOG_UNIMP, "allwinner-h3-emac: read access to " + "unknown MII register 0x%x\n", reg); + s->mii_data = 0; + break; + } + + trace_allwinner_sun8i_emac_mii_read_reg(reg, s->mii_data); + } +} + +static void allwinner_sun8i_emac_update_irq(AwSun8iEmacState *s) +{ + qemu_set_irq(s->irq, (s->int_sta & s->int_en) != 0); +} + +static uint32_t allwinner_sun8i_emac_next_desc(FrameDescriptor *desc, + size_t min_size) +{ + uint32_t paddr = desc->next; + + cpu_physical_memory_read(paddr, desc, sizeof(*desc)); + + if ((desc->status & DESC_STATUS_CTL) && + (desc->status2 & DESC_STATUS2_BUF_SIZE_MASK) >= min_size) { + return paddr; + } else { + return 0; + } +} + +static uint32_t allwinner_sun8i_emac_get_desc(FrameDescriptor *desc, + uint32_t start_addr, + size_t min_size) +{ + uint32_t desc_addr = start_addr; + + /* Note that the list is a cycle. Last entry points back to the head. */ + while (desc_addr != 0) { + cpu_physical_memory_read(desc_addr, desc, sizeof(*desc)); + + if ((desc->status & DESC_STATUS_CTL) && + (desc->status2 & DESC_STATUS2_BUF_SIZE_MASK) >= min_size) { + return desc_addr; + } else if (desc->next == start_addr) { + break; + } else { + desc_addr = desc->next; + } + } + + return 0; +} + +static uint32_t allwinner_sun8i_emac_rx_desc(AwSun8iEmacState *s, + FrameDescriptor *desc, + size_t min_size) +{ + return allwinner_sun8i_emac_get_desc(desc, s->rx_desc_curr, min_size); +} + +static uint32_t allwinner_sun8i_emac_tx_desc(AwSun8iEmacState *s, + FrameDescriptor *desc, + size_t min_size) +{ + return allwinner_sun8i_emac_get_desc(desc, s->tx_desc_head, min_size); +} + +static void allwinner_sun8i_emac_flush_desc(FrameDescriptor *desc, + uint32_t phys_addr) +{ + cpu_physical_memory_write(phys_addr, desc, sizeof(*desc)); +} + +static int allwinner_sun8i_emac_can_receive(NetClientState *nc) +{ + AwSun8iEmacState *s = qemu_get_nic_opaque(nc); + FrameDescriptor desc; + + return (s->rx_ctl0 & RX_CTL0_RX_EN) && + (allwinner_sun8i_emac_rx_desc(s, &desc, 0) != 0); +} + +static ssize_t allwinner_sun8i_emac_receive(NetClientState *nc, + const uint8_t *buf, + size_t size) +{ + AwSun8iEmacState *s = qemu_get_nic_opaque(nc); + FrameDescriptor desc; + size_t bytes_left = size; + size_t desc_bytes = 0; + size_t pad_fcs_size = 4; + size_t padding = 0; + + if (!(s->rx_ctl0 & RX_CTL0_RX_EN)) { + return -1; + } + + s->rx_desc_curr = allwinner_sun8i_emac_rx_desc(s, &desc, + AW_SUN8I_EMAC_MIN_PKT_SZ); + if (!s->rx_desc_curr) { + s->int_sta |= INT_STA_RX_BUF_UA; + } + + /* Keep filling RX descriptors until the whole frame is written */ + while (s->rx_desc_curr && bytes_left > 0) { + desc.status &= ~DESC_STATUS_CTL; + desc.status &= ~RX_DESC_STATUS_FRM_LEN_MASK; + + if (bytes_left == size) { + desc.status |= RX_DESC_STATUS_FIRST_DESC; + } + + if ((desc.status2 & DESC_STATUS2_BUF_SIZE_MASK) < + (bytes_left + pad_fcs_size)) { + desc_bytes = desc.status2 & DESC_STATUS2_BUF_SIZE_MASK; + desc.status |= desc_bytes << RX_DESC_STATUS_FRM_LEN_SHIFT; + } else { + padding = pad_fcs_size; + if (bytes_left < AW_SUN8I_EMAC_MIN_PKT_SZ) { + padding += (AW_SUN8I_EMAC_MIN_PKT_SZ - bytes_left); + } + + desc_bytes = (bytes_left); + desc.status |= RX_DESC_STATUS_LAST_DESC; + desc.status |= (bytes_left + padding) + << RX_DESC_STATUS_FRM_LEN_SHIFT; + } + + cpu_physical_memory_write(desc.addr, buf, desc_bytes); + allwinner_sun8i_emac_flush_desc(&desc, s->rx_desc_curr); + trace_allwinner_sun8i_emac_receive(s->rx_desc_curr, desc.addr, + desc_bytes); + + /* Check if frame needs to raise the receive interrupt */ + if (!(desc.status2 & RX_DESC_STATUS2_RX_INT_CTL)) { + s->int_sta |= INT_STA_RX; + } + + /* Increment variables */ + buf += desc_bytes; + bytes_left -= desc_bytes; + + /* Move to the next descriptor */ + s->rx_desc_curr = allwinner_sun8i_emac_next_desc(&desc, 64); + if (!s->rx_desc_curr) { + /* Not enough buffer space available */ + s->int_sta |= INT_STA_RX_BUF_UA; + s->rx_desc_curr = s->rx_desc_head; + break; + } + } + + /* Report receive DMA is finished */ + s->rx_ctl1 &= ~RX_CTL1_RX_DMA_START; + allwinner_sun8i_emac_update_irq(s); + + return size; +} + +static void allwinner_sun8i_emac_transmit(AwSun8iEmacState *s) +{ + NetClientState *nc = qemu_get_queue(s->nic); + FrameDescriptor desc; + size_t bytes = 0; + size_t packet_bytes = 0; + size_t transmitted = 0; + static uint8_t packet_buf[2048]; + + s->tx_desc_curr = allwinner_sun8i_emac_tx_desc(s, &desc, 0); + + /* Read all transmit descriptors */ + while (s->tx_desc_curr != 0) { + + /* Read from physical memory into packet buffer */ + bytes = desc.status2 & DESC_STATUS2_BUF_SIZE_MASK; + if (bytes + packet_bytes > sizeof(packet_buf)) { + desc.status |= TX_DESC_STATUS_LENGTH_ERR; + break; + } + cpu_physical_memory_read(desc.addr, packet_buf + packet_bytes, bytes); + packet_bytes += bytes; + desc.status &= ~DESC_STATUS_CTL; + allwinner_sun8i_emac_flush_desc(&desc, s->tx_desc_curr); + + /* After the last descriptor, send the packet */ + if (desc.status2 & TX_DESC_STATUS2_LAST_DESC) { + if (desc.status2 & TX_DESC_STATUS2_CHECKSUM_MASK) { + net_checksum_calculate(packet_buf, packet_bytes); + } + + qemu_send_packet(nc, packet_buf, packet_bytes); + trace_allwinner_sun8i_emac_transmit(s->tx_desc_curr, desc.addr, + bytes); + + packet_bytes = 0; + transmitted++; + } + s->tx_desc_curr = allwinner_sun8i_emac_next_desc(&desc, 0); + } + + /* Raise transmit completed interrupt */ + if (transmitted > 0) { + s->int_sta |= INT_STA_TX; + s->tx_ctl1 &= ~TX_CTL1_TX_DMA_START; + allwinner_sun8i_emac_update_irq(s); + } +} + +static void allwinner_sun8i_emac_reset(DeviceState *dev) +{ + AwSun8iEmacState *s = AW_SUN8I_EMAC(dev); + NetClientState *nc = qemu_get_queue(s->nic); + + trace_allwinner_sun8i_emac_reset(); + + s->mii_cmd = 0; + s->mii_data = 0; + s->basic_ctl0 = 0; + s->basic_ctl1 = REG_BASIC_CTL_1_RST; + s->int_en = 0; + s->int_sta = 0; + s->frm_flt = 0; + s->rx_ctl0 = 0; + s->rx_ctl1 = RX_CTL1_RX_MD; + s->rx_desc_head = 0; + s->rx_desc_curr = 0; + s->tx_ctl0 = 0; + s->tx_ctl1 = 0; + s->tx_desc_head = 0; + s->tx_desc_curr = 0; + s->tx_flowctl = 0; + + allwinner_sun8i_emac_mii_reset(s, !nc->link_down); +} + +static uint64_t allwinner_sun8i_emac_read(void *opaque, hwaddr offset, + unsigned size) +{ + AwSun8iEmacState *s = AW_SUN8I_EMAC(opaque); + uint64_t value = 0; + FrameDescriptor desc; + + switch (offset) { + case REG_BASIC_CTL_0: /* Basic Control 0 */ + value = s->basic_ctl0; + break; + case REG_BASIC_CTL_1: /* Basic Control 1 */ + value = s->basic_ctl1; + break; + case REG_INT_STA: /* Interrupt Status */ + value = s->int_sta; + break; + case REG_INT_EN: /* Interupt Enable */ + value = s->int_en; + break; + case REG_TX_CTL_0: /* Transmit Control 0 */ + value = s->tx_ctl0; + break; + case REG_TX_CTL_1: /* Transmit Control 1 */ + value = s->tx_ctl1; + break; + case REG_TX_FLOW_CTL: /* Transmit Flow Control */ + value = s->tx_flowctl; + break; + case REG_TX_DMA_DESC_LIST: /* Transmit Descriptor List Address */ + value = s->tx_desc_head; + break; + case REG_RX_CTL_0: /* Receive Control 0 */ + value = s->rx_ctl0; + break; + case REG_RX_CTL_1: /* Receive Control 1 */ + value = s->rx_ctl1; + break; + case REG_RX_DMA_DESC_LIST: /* Receive Descriptor List Address */ + value = s->rx_desc_head; + break; + case REG_FRM_FLT: /* Receive Frame Filter */ + value = s->frm_flt; + break; + case REG_RX_HASH_0: /* Receive Hash Table 0 */ + case REG_RX_HASH_1: /* Receive Hash Table 1 */ + break; + case REG_MII_CMD: /* Management Interface Command */ + value = s->mii_cmd; + break; + case REG_MII_DATA: /* Management Interface Data */ + value = s->mii_data; + break; + case REG_ADDR_HIGH: /* MAC Address High */ + value = *(((uint32_t *) (s->conf.macaddr.a)) + 1); + break; + case REG_ADDR_LOW: /* MAC Address Low */ + value = *(uint32_t *) (s->conf.macaddr.a); + break; + case REG_TX_DMA_STA: /* Transmit DMA Status */ + break; + case REG_TX_CUR_DESC: /* Transmit Current Descriptor */ + value = s->tx_desc_curr; + break; + case REG_TX_CUR_BUF: /* Transmit Current Buffer */ + if (s->tx_desc_curr != 0) { + cpu_physical_memory_read(s->tx_desc_curr, &desc, sizeof(desc)); + value = desc.addr; + } else { + value = 0; + } + break; + case REG_RX_DMA_STA: /* Receive DMA Status */ + break; + case REG_RX_CUR_DESC: /* Receive Current Descriptor */ + value = s->rx_desc_curr; + break; + case REG_RX_CUR_BUF: /* Receive Current Buffer */ + if (s->rx_desc_curr != 0) { + cpu_physical_memory_read(s->rx_desc_curr, &desc, sizeof(desc)); + value = desc.addr; + } else { + value = 0; + } + break; + case REG_RGMII_STA: /* RGMII Status */ + break; + default: + qemu_log_mask(LOG_UNIMP, "allwinner-h3-emac: read access to unknown " + "EMAC register 0x" TARGET_FMT_plx "\n", + offset); + } + + trace_allwinner_sun8i_emac_read(offset, value); + return value; +} + +static void allwinner_sun8i_emac_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AwSun8iEmacState *s = AW_SUN8I_EMAC(opaque); + NetClientState *nc = qemu_get_queue(s->nic); + + trace_allwinner_sun8i_emac_write(offset, value); + + switch (offset) { + case REG_BASIC_CTL_0: /* Basic Control 0 */ + s->basic_ctl0 = value; + break; + case REG_BASIC_CTL_1: /* Basic Control 1 */ + if (value & BASIC_CTL1_SOFTRST) { + allwinner_sun8i_emac_reset(DEVICE(s)); + value &= ~BASIC_CTL1_SOFTRST; + } + s->basic_ctl1 = value; + if (allwinner_sun8i_emac_can_receive(nc)) { + qemu_flush_queued_packets(nc); + } + break; + case REG_INT_STA: /* Interrupt Status */ + s->int_sta &= ~value; + allwinner_sun8i_emac_update_irq(s); + break; + case REG_INT_EN: /* Interrupt Enable */ + s->int_en = value; + allwinner_sun8i_emac_update_irq(s); + break; + case REG_TX_CTL_0: /* Transmit Control 0 */ + s->tx_ctl0 = value; + break; + case REG_TX_CTL_1: /* Transmit Control 1 */ + s->tx_ctl1 = value; + if (value & TX_CTL1_TX_DMA_EN) { + allwinner_sun8i_emac_transmit(s); + } + break; + case REG_TX_FLOW_CTL: /* Transmit Flow Control */ + s->tx_flowctl = value; + break; + case REG_TX_DMA_DESC_LIST: /* Transmit Descriptor List Address */ + s->tx_desc_head = value; + s->tx_desc_curr = value; + break; + case REG_RX_CTL_0: /* Receive Control 0 */ + s->rx_ctl0 = value; + break; + case REG_RX_CTL_1: /* Receive Control 1 */ + s->rx_ctl1 = value | RX_CTL1_RX_MD; + if ((value & RX_CTL1_RX_DMA_EN) && + allwinner_sun8i_emac_can_receive(nc)) { + qemu_flush_queued_packets(nc); + } + break; + case REG_RX_DMA_DESC_LIST: /* Receive Descriptor List Address */ + s->rx_desc_head = value; + s->rx_desc_curr = value; + break; + case REG_FRM_FLT: /* Receive Frame Filter */ + s->frm_flt = value; + break; + case REG_RX_HASH_0: /* Receive Hash Table 0 */ + case REG_RX_HASH_1: /* Receive Hash Table 1 */ + break; + case REG_MII_CMD: /* Management Interface Command */ + s->mii_cmd = value & ~MII_CMD_PHY_BUSY; + allwinner_sun8i_emac_mii_cmd(s); + break; + case REG_MII_DATA: /* Management Interface Data */ + s->mii_data = value; + break; + case REG_ADDR_HIGH: /* MAC Address High */ + s->conf.macaddr.a[4] = (value & 0xff); + s->conf.macaddr.a[5] = (value & 0xff00) >> 8; + break; + case REG_ADDR_LOW: /* MAC Address Low */ + s->conf.macaddr.a[0] = (value & 0xff); + s->conf.macaddr.a[1] = (value & 0xff00) >> 8; + s->conf.macaddr.a[2] = (value & 0xff0000) >> 16; + s->conf.macaddr.a[3] = (value & 0xff000000) >> 24; + break; + case REG_TX_DMA_STA: /* Transmit DMA Status */ + case REG_TX_CUR_DESC: /* Transmit Current Descriptor */ + case REG_TX_CUR_BUF: /* Transmit Current Buffer */ + case REG_RX_DMA_STA: /* Receive DMA Status */ + case REG_RX_CUR_DESC: /* Receive Current Descriptor */ + case REG_RX_CUR_BUF: /* Receive Current Buffer */ + case REG_RGMII_STA: /* RGMII Status */ + break; + default: + qemu_log_mask(LOG_UNIMP, "allwinner-h3-emac: write access to unknown " + "EMAC register 0x" TARGET_FMT_plx "\n", + offset); + } +} + +static void allwinner_sun8i_emac_set_link(NetClientState *nc) +{ + AwSun8iEmacState *s = qemu_get_nic_opaque(nc); + + trace_allwinner_sun8i_emac_set_link(!nc->link_down); + allwinner_sun8i_emac_mii_set_link(s, !nc->link_down); +} + +static const MemoryRegionOps allwinner_sun8i_emac_mem_ops = { + .read = allwinner_sun8i_emac_read, + .write = allwinner_sun8i_emac_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static NetClientInfo net_allwinner_sun8i_emac_info = { + .type = NET_CLIENT_DRIVER_NIC, + .size = sizeof(NICState), + .can_receive = allwinner_sun8i_emac_can_receive, + .receive = allwinner_sun8i_emac_receive, + .link_status_changed = allwinner_sun8i_emac_set_link, +}; + +static void allwinner_sun8i_emac_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwSun8iEmacState *s = AW_SUN8I_EMAC(obj); + + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_sun8i_emac_mem_ops, + s, TYPE_AW_SUN8I_EMAC, 64 * KiB); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + +static void allwinner_sun8i_emac_realize(DeviceState *dev, Error **errp) +{ + AwSun8iEmacState *s = AW_SUN8I_EMAC(dev); + + qemu_macaddr_default_if_unset(&s->conf.macaddr); + s->nic = qemu_new_nic(&net_allwinner_sun8i_emac_info, &s->conf, + object_get_typename(OBJECT(dev)), dev->id, s); + qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); +} + +static Property allwinner_sun8i_emac_properties[] = { + DEFINE_NIC_PROPERTIES(AwSun8iEmacState, conf), + DEFINE_PROP_UINT8("phy-addr", AwSun8iEmacState, mii_phy_addr, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static int allwinner_sun8i_emac_post_load(void *opaque, int version_id) +{ + AwSun8iEmacState *s = opaque; + + allwinner_sun8i_emac_set_link(qemu_get_queue(s->nic)); + + return 0; +} + +static const VMStateDescription vmstate_aw_emac = { + .name = "allwinner-sun8i-emac", + .version_id = 1, + .minimum_version_id = 1, + .post_load = allwinner_sun8i_emac_post_load, + .fields = (VMStateField[]) { + VMSTATE_UINT8(mii_phy_addr, AwSun8iEmacState), + VMSTATE_UINT32(mii_cmd, AwSun8iEmacState), + VMSTATE_UINT32(mii_data, AwSun8iEmacState), + VMSTATE_UINT32(mii_cr, AwSun8iEmacState), + VMSTATE_UINT32(mii_st, AwSun8iEmacState), + VMSTATE_UINT32(mii_adv, AwSun8iEmacState), + VMSTATE_UINT32(basic_ctl0, AwSun8iEmacState), + VMSTATE_UINT32(basic_ctl1, AwSun8iEmacState), + VMSTATE_UINT32(int_en, AwSun8iEmacState), + VMSTATE_UINT32(int_sta, AwSun8iEmacState), + VMSTATE_UINT32(frm_flt, AwSun8iEmacState), + VMSTATE_UINT32(rx_ctl0, AwSun8iEmacState), + VMSTATE_UINT32(rx_ctl1, AwSun8iEmacState), + VMSTATE_UINT32(rx_desc_head, AwSun8iEmacState), + VMSTATE_UINT32(rx_desc_curr, AwSun8iEmacState), + VMSTATE_UINT32(tx_ctl0, AwSun8iEmacState), + VMSTATE_UINT32(tx_ctl1, AwSun8iEmacState), + VMSTATE_UINT32(tx_desc_head, AwSun8iEmacState), + VMSTATE_UINT32(tx_desc_curr, AwSun8iEmacState), + VMSTATE_UINT32(tx_flowctl, AwSun8iEmacState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_sun8i_emac_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = allwinner_sun8i_emac_realize; + dc->reset = allwinner_sun8i_emac_reset; + dc->vmsd = &vmstate_aw_emac; + device_class_set_props(dc, allwinner_sun8i_emac_properties); +} + +static const TypeInfo allwinner_sun8i_emac_info = { + .name = TYPE_AW_SUN8I_EMAC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AwSun8iEmacState), + .instance_init = allwinner_sun8i_emac_init, + .class_init = allwinner_sun8i_emac_class_init, +}; + +static void allwinner_sun8i_emac_register_types(void) +{ + type_register_static(&allwinner_sun8i_emac_info); +} + +type_init(allwinner_sun8i_emac_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 config ALLWINNER_H3 bool select ALLWINNER_A10_PIT + select ALLWINNER_SUN8I_EMAC select SERIAL select ARM_TIMER select ARM_GIC diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config MIPSNET config ALLWINNER_EMAC bool +config ALLWINNER_SUN8I_EMAC + bool + config IMX_FEC bool diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# allwinner-sun8i-emac.c +allwinner_sun8i_emac_mii_write_reg(uint32_t reg, uint32_t value) "MII write: reg=0x%" PRIx32 " value=0x%" PRIx32 +allwinner_sun8i_emac_mii_read_reg(uint32_t reg, uint32_t value) "MII read: reg=0x%" PRIx32 " value=0x%" PRIx32 +allwinner_sun8i_emac_receive(uint32_t desc, uint32_t paddr, uint32_t bytes) "RX packet: desc=0x%" PRIx32 " paddr=0x%" PRIx32 " bytes=%" PRIu32 +allwinner_sun8i_emac_transmit(uint32_t desc, uint32_t paddr, uint32_t bytes) "TX packet: desc=0x%" PRIx32 " paddr=0x%" PRIx32 " bytes=%" PRIu32 +allwinner_sun8i_emac_reset(void) "HW reset" +allwinner_sun8i_emac_set_link(bool active) "Set link: active=%u" +allwinner_sun8i_emac_read(uint64_t offset, uint64_t val) "MMIO read: offset=0x%" PRIx64 " value=0x%" PRIx64 +allwinner_sun8i_emac_write(uint64_t offset, uint64_t val) "MMIO write: offset=0x%" PRIx64 " value=0x%" PRIx64 + # etraxfs_eth.c mdio_phy_read(int regnum, uint16_t value) "read phy_reg:%d value:0x%04x" mdio_phy_write(int regnum, uint16_t value) "write phy_reg:%d value:0x%04x" -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> A real Allwinner H3 SoC contains a Boot ROM which is the first code that runs right after the SoC is powered on. The Boot ROM is responsible for loading user code (e.g. a bootloader) from any of the supported external devices and writing the downloaded code to internal SRAM. After loading the SoC begins executing the code written to SRAM. This commits adds emulation of the Boot ROM firmware setup functionality by loading user code from SD card in the A1 SRAM. While the A1 SRAM is 64KiB, we limit the size to 32KiB because the real H3 Boot ROM also rejects sizes larger than 32KiB. For reference, this behaviour is documented by the Linux Sunxi project wiki at: https://linux-sunxi.org/BROM#U-Boot_SPL_limitations Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-11-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-h3.h | 21 +++++++++++++++++++++ hw/arm/allwinner-h3.c | 17 +++++++++++++++++ hw/arm/orangepi.c | 5 +++++ 3 files changed, 43 insertions(+) diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/allwinner-sdhost.h" #include "hw/net/allwinner-sun8i-emac.h" #include "target/arm/cpu.h" +#include "sysemu/block-backend.h" /** * Allwinner H3 device list @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { MemoryRegion sram_c; } AwH3State; +/** + * Emulate Boot ROM firmware setup functionality. + * + * A real Allwinner H3 SoC contains a Boot ROM + * which is the first code that runs right after + * the SoC is powered on. The Boot ROM is responsible + * for loading user code (e.g. a bootloader) from any + * of the supported external devices and writing the + * downloaded code to internal SRAM. After loading the SoC + * begins executing the code written to SRAM. + * + * This function emulates the Boot ROM by copying 32 KiB + * of data from the given block device and writes it to + * the start of the first internal SRAM memory. + * + * @s: Allwinner H3 state object pointer + * @blk: Block backend device object pointer + */ +void allwinner_h3_bootrom_setup(AwH3State *s, BlockBackend *blk); + #endif /* HW_ARM_ALLWINNER_H3_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/serial.h" #include "hw/misc/unimp.h" #include "hw/usb/hcd-ehci.h" +#include "hw/loader.h" #include "sysemu/sysemu.h" #include "hw/arm/allwinner-h3.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_NUM_SPI = 128 }; +void allwinner_h3_bootrom_setup(AwH3State *s, BlockBackend *blk) +{ + const int64_t rom_size = 32 * KiB; + g_autofree uint8_t *buffer = g_new0(uint8_t, rom_size); + + if (blk_pread(blk, 8 * KiB, buffer, rom_size) < 0) { + error_setg(&error_fatal, "%s: failed to read BlockBackend data", + __func__); + return; + } + + rom_add_blob("allwinner-h3.bootrom", buffer, rom_size, + rom_size, s->memmap[AW_H3_SRAM_A1], + NULL, NULL, NULL, NULL, false); +} + static void allwinner_h3_init(Object *obj) { AwH3State *s = AW_H3(obj); diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/orangepi.c +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ static void orangepi_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), h3->memmap[AW_H3_SDRAM], machine->ram); + /* Load target kernel or start using BootROM */ + if (!machine->kernel_filename && blk_is_available(blk)) { + /* Use Boot ROM to copy data from SD card to SRAM */ + allwinner_h3_bootrom_setup(h3, blk); + } orangepi_binfo.loader_start = h3->memmap[AW_H3_SDRAM]; orangepi_binfo.ram_size = machine->ram_size; arm_load_kernel(ARM_CPU(first_cpu), machine, &orangepi_binfo); -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> In the Allwinner H3 SoC the SDRAM controller is responsible for interfacing with the external Synchronous Dynamic Random Access Memory (SDRAM). Types of memory that the SDRAM controller supports are DDR2/DDR3 and capacities of up to 2GiB. This commit adds emulation support of the Allwinner H3 SDRAM controller. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-12-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 5 + include/hw/misc/allwinner-h3-dramc.h | 106 ++++++++ hw/arm/allwinner-h3.c | 19 +- hw/arm/orangepi.c | 6 + hw/misc/allwinner-h3-dramc.c | 358 +++++++++++++++++++++++++++ hw/misc/trace-events | 10 + 7 files changed, 502 insertions(+), 3 deletions(-) create mode 100644 include/hw/misc/allwinner-h3-dramc.h create mode 100644 hw/misc/allwinner-h3-dramc.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o obj-$(CONFIG_ALLWINNER_H3) += allwinner-cpucfg.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-dramc.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-sysctrl.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-sid.o common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/arm_gic.h" #include "hw/misc/allwinner-h3-ccu.h" #include "hw/misc/allwinner-cpucfg.h" +#include "hw/misc/allwinner-h3-dramc.h" #include "hw/misc/allwinner-h3-sysctrl.h" #include "hw/misc/allwinner-sid.h" #include "hw/sd/allwinner-sdhost.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_UART2, AW_H3_UART3, AW_H3_EMAC, + AW_H3_DRAMCOM, + AW_H3_DRAMCTL, + AW_H3_DRAMPHY, AW_H3_GIC_DIST, AW_H3_GIC_CPU, AW_H3_GIC_HYP, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { AwA10PITState timer; AwH3ClockCtlState ccu; AwCpuCfgState cpucfg; + AwH3DramCtlState dramc; AwH3SysCtrlState sysctrl; AwSidState sid; AwSdHostState mmc0; diff --git a/include/hw/misc/allwinner-h3-dramc.h b/include/hw/misc/allwinner-h3-dramc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-h3-dramc.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 SDRAM Controller emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_H3_DRAMC_H +#define HW_MISC_ALLWINNER_H3_DRAMC_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "exec/hwaddr.h" + +/** + * Constants + * @{ + */ + +/** Highest register address used by DRAMCOM module */ +#define AW_H3_DRAMCOM_REGS_MAXADDR (0x804) + +/** Total number of known DRAMCOM registers */ +#define AW_H3_DRAMCOM_REGS_NUM (AW_H3_DRAMCOM_REGS_MAXADDR / \ + sizeof(uint32_t)) + +/** Highest register address used by DRAMCTL module */ +#define AW_H3_DRAMCTL_REGS_MAXADDR (0x88c) + +/** Total number of known DRAMCTL registers */ +#define AW_H3_DRAMCTL_REGS_NUM (AW_H3_DRAMCTL_REGS_MAXADDR / \ + sizeof(uint32_t)) + +/** Highest register address used by DRAMPHY module */ +#define AW_H3_DRAMPHY_REGS_MAXADDR (0x4) + +/** Total number of known DRAMPHY registers */ +#define AW_H3_DRAMPHY_REGS_NUM (AW_H3_DRAMPHY_REGS_MAXADDR / \ + sizeof(uint32_t)) + +/** @} */ + +/** + * Object model + * @{ + */ + +#define TYPE_AW_H3_DRAMC "allwinner-h3-dramc" +#define AW_H3_DRAMC(obj) \ + OBJECT_CHECK(AwH3DramCtlState, (obj), TYPE_AW_H3_DRAMC) + +/** @} */ + +/** + * Allwinner H3 SDRAM Controller object instance state. + */ +typedef struct AwH3DramCtlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Physical base address for start of RAM */ + hwaddr ram_addr; + + /** Total RAM size in megabytes */ + uint32_t ram_size; + + /** + * @name Memory Regions + * @{ + */ + + MemoryRegion row_mirror; /**< Simulates rows for RAM size detection */ + MemoryRegion row_mirror_alias; /**< Alias of the row which is mirrored */ + MemoryRegion dramcom_iomem; /**< DRAMCOM module I/O registers */ + MemoryRegion dramctl_iomem; /**< DRAMCTL module I/O registers */ + MemoryRegion dramphy_iomem; /**< DRAMPHY module I/O registers */ + + /** @} */ + + /** + * @name Hardware Registers + * @{ + */ + + uint32_t dramcom[AW_H3_DRAMCOM_REGS_NUM]; /**< Array of DRAMCOM registers */ + uint32_t dramctl[AW_H3_DRAMCTL_REGS_NUM]; /**< Array of DRAMCTL registers */ + uint32_t dramphy[AW_H3_DRAMPHY_REGS_NUM] ;/**< Array of DRAMPHY registers */ + + /** @} */ + +} AwH3DramCtlState; + +#endif /* HW_MISC_ALLWINNER_H3_DRAMC_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_UART2] = 0x01c28800, [AW_H3_UART3] = 0x01c28c00, [AW_H3_EMAC] = 0x01c30000, + [AW_H3_DRAMCOM] = 0x01c62000, + [AW_H3_DRAMCTL] = 0x01c63000, + [AW_H3_DRAMPHY] = 0x01c65000, [AW_H3_GIC_DIST] = 0x01c81000, [AW_H3_GIC_CPU] = 0x01c82000, [AW_H3_GIC_HYP] = 0x01c84000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "scr", 0x01c2c400, 1 * KiB }, { "gpu", 0x01c40000, 64 * KiB }, { "hstmr", 0x01c60000, 4 * KiB }, - { "dramcom", 0x01c62000, 4 * KiB }, - { "dramctl0", 0x01c63000, 4 * KiB }, - { "dramphy0", 0x01c65000, 4 * KiB }, { "spi0", 0x01c68000, 4 * KiB }, { "spi1", 0x01c69000, 4 * KiB }, { "csi", 0x01cb0000, 320 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) sysbus_init_child_obj(obj, "emac", &s->emac, sizeof(s->emac), TYPE_AW_SUN8I_EMAC); + + sysbus_init_child_obj(obj, "dramc", &s->dramc, sizeof(s->dramc), + TYPE_AW_H3_DRAMC); + object_property_add_alias(obj, "ram-addr", OBJECT(&s->dramc), + "ram-addr", &error_abort); + object_property_add_alias(obj, "ram-size", OBJECT(&s->dramc), + "ram-size", &error_abort); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART3), 115200, serial_hd(3), DEVICE_NATIVE_ENDIAN); + /* DRAMC */ + qdev_init_nofail(DEVICE(&s->dramc)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 0, s->memmap[AW_H3_DRAMCOM]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 1, s->memmap[AW_H3_DRAMCTL]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 2, s->memmap[AW_H3_DRAMPHY]); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { create_unimplemented_device(unimplemented[i].device_name, diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/orangepi.c +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ static void orangepi_init(MachineState *machine) /* Setup EMAC properties */ object_property_set_int(OBJECT(&h3->emac), 1, "phy-addr", &error_abort); + /* DRAMC */ + object_property_set_uint(OBJECT(h3), h3->memmap[AW_H3_SDRAM], + "ram-addr", &error_abort); + object_property_set_int(OBJECT(h3), machine->ram_size / MiB, "ram-size", + &error_abort); + /* Mark H3 object realized */ object_property_set_bool(OBJECT(h3), true, "realized", &error_abort); diff --git a/hw/misc/allwinner-h3-dramc.c b/hw/misc/allwinner-h3-dramc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-h3-dramc.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 SDRAM Controller emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qemu/error-report.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "exec/address-spaces.h" +#include "hw/qdev-properties.h" +#include "qapi/error.h" +#include "hw/misc/allwinner-h3-dramc.h" +#include "trace.h" + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* DRAMCOM register offsets */ +enum { + REG_DRAMCOM_CR = 0x0000, /* Control Register */ +}; + +/* DRAMCTL register offsets */ +enum { + REG_DRAMCTL_PIR = 0x0000, /* PHY Initialization Register */ + REG_DRAMCTL_PGSR = 0x0010, /* PHY General Status Register */ + REG_DRAMCTL_STATR = 0x0018, /* Status Register */ +}; + +/* DRAMCTL register flags */ +enum { + REG_DRAMCTL_PGSR_INITDONE = (1 << 0), +}; + +enum { + REG_DRAMCTL_STATR_ACTIVE = (1 << 0), +}; + +static void allwinner_h3_dramc_map_rows(AwH3DramCtlState *s, uint8_t row_bits, + uint8_t bank_bits, uint16_t page_size) +{ + /* + * This function simulates row addressing behavior when bootloader + * software attempts to detect the amount of available SDRAM. In U-Boot + * the controller is configured with the widest row addressing available. + * Then a pattern is written to RAM at an offset on the row boundary size. + * If the value read back equals the value read back from the + * start of RAM, the bootloader knows the amount of row bits. + * + * This function inserts a mirrored memory region when the configured row + * bits are not matching the actual emulated memory, to simulate the + * same behavior on hardware as expected by the bootloader. + */ + uint8_t row_bits_actual = 0; + + /* Calculate the actual row bits using the ram_size property */ + for (uint8_t i = 8; i < 12; i++) { + if (1 << i == s->ram_size) { + row_bits_actual = i + 3; + break; + } + } + + if (s->ram_size == (1 << (row_bits - 3))) { + /* When row bits is the expected value, remove the mirror */ + memory_region_set_enabled(&s->row_mirror_alias, false); + trace_allwinner_h3_dramc_rowmirror_disable(); + + } else if (row_bits_actual) { + /* Row bits not matching ram_size, install the rows mirror */ + hwaddr row_mirror = s->ram_addr + ((1 << (row_bits_actual + + bank_bits)) * page_size); + + memory_region_set_enabled(&s->row_mirror_alias, true); + memory_region_set_address(&s->row_mirror_alias, row_mirror); + + trace_allwinner_h3_dramc_rowmirror_enable(row_mirror); + } +} + +static uint64_t allwinner_h3_dramcom_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + if (idx >= AW_H3_DRAMCOM_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + trace_allwinner_h3_dramcom_read(offset, s->dramcom[idx], size); + + return s->dramcom[idx]; +} + +static void allwinner_h3_dramcom_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + trace_allwinner_h3_dramcom_write(offset, val, size); + + if (idx >= AW_H3_DRAMCOM_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + switch (offset) { + case REG_DRAMCOM_CR: /* Control Register */ + allwinner_h3_dramc_map_rows(s, ((val >> 4) & 0xf) + 1, + ((val >> 2) & 0x1) + 2, + 1 << (((val >> 8) & 0xf) + 3)); + break; + default: + break; + }; + + s->dramcom[idx] = (uint32_t) val; +} + +static uint64_t allwinner_h3_dramctl_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + if (idx >= AW_H3_DRAMCTL_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + trace_allwinner_h3_dramctl_read(offset, s->dramctl[idx], size); + + return s->dramctl[idx]; +} + +static void allwinner_h3_dramctl_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + trace_allwinner_h3_dramctl_write(offset, val, size); + + if (idx >= AW_H3_DRAMCTL_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + switch (offset) { + case REG_DRAMCTL_PIR: /* PHY Initialization Register */ + s->dramctl[REG_INDEX(REG_DRAMCTL_PGSR)] |= REG_DRAMCTL_PGSR_INITDONE; + s->dramctl[REG_INDEX(REG_DRAMCTL_STATR)] |= REG_DRAMCTL_STATR_ACTIVE; + break; + default: + break; + } + + s->dramctl[idx] = (uint32_t) val; +} + +static uint64_t allwinner_h3_dramphy_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + if (idx >= AW_H3_DRAMPHY_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + trace_allwinner_h3_dramphy_read(offset, s->dramphy[idx], size); + + return s->dramphy[idx]; +} + +static void allwinner_h3_dramphy_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + trace_allwinner_h3_dramphy_write(offset, val, size); + + if (idx >= AW_H3_DRAMPHY_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + s->dramphy[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_h3_dramcom_ops = { + .read = allwinner_h3_dramcom_read, + .write = allwinner_h3_dramcom_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static const MemoryRegionOps allwinner_h3_dramctl_ops = { + .read = allwinner_h3_dramctl_read, + .write = allwinner_h3_dramctl_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static const MemoryRegionOps allwinner_h3_dramphy_ops = { + .read = allwinner_h3_dramphy_read, + .write = allwinner_h3_dramphy_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_h3_dramc_reset(DeviceState *dev) +{ + AwH3DramCtlState *s = AW_H3_DRAMC(dev); + + /* Set default values for registers */ + memset(&s->dramcom, 0, sizeof(s->dramcom)); + memset(&s->dramctl, 0, sizeof(s->dramctl)); + memset(&s->dramphy, 0, sizeof(s->dramphy)); +} + +static void allwinner_h3_dramc_realize(DeviceState *dev, Error **errp) +{ + AwH3DramCtlState *s = AW_H3_DRAMC(dev); + + /* Only power of 2 RAM sizes from 256MiB up to 2048MiB are supported */ + for (uint8_t i = 8; i < 13; i++) { + if (1 << i == s->ram_size) { + break; + } else if (i == 12) { + error_report("%s: ram-size %u MiB is not supported", + __func__, s->ram_size); + exit(1); + } + } + + /* Setup row mirror mappings */ + memory_region_init_ram(&s->row_mirror, OBJECT(s), + "allwinner-h3-dramc.row-mirror", + 4 * KiB, &error_abort); + memory_region_add_subregion_overlap(get_system_memory(), s->ram_addr, + &s->row_mirror, 10); + + memory_region_init_alias(&s->row_mirror_alias, OBJECT(s), + "allwinner-h3-dramc.row-mirror-alias", + &s->row_mirror, 0, 4 * KiB); + memory_region_add_subregion_overlap(get_system_memory(), + s->ram_addr + 1 * MiB, + &s->row_mirror_alias, 10); + memory_region_set_enabled(&s->row_mirror_alias, false); +} + +static void allwinner_h3_dramc_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwH3DramCtlState *s = AW_H3_DRAMC(obj); + + /* DRAMCOM registers */ + memory_region_init_io(&s->dramcom_iomem, OBJECT(s), + &allwinner_h3_dramcom_ops, s, + TYPE_AW_H3_DRAMC, 4 * KiB); + sysbus_init_mmio(sbd, &s->dramcom_iomem); + + /* DRAMCTL registers */ + memory_region_init_io(&s->dramctl_iomem, OBJECT(s), + &allwinner_h3_dramctl_ops, s, + TYPE_AW_H3_DRAMC, 4 * KiB); + sysbus_init_mmio(sbd, &s->dramctl_iomem); + + /* DRAMPHY registers */ + memory_region_init_io(&s->dramphy_iomem, OBJECT(s), + &allwinner_h3_dramphy_ops, s, + TYPE_AW_H3_DRAMC, 4 * KiB); + sysbus_init_mmio(sbd, &s->dramphy_iomem); +} + +static Property allwinner_h3_dramc_properties[] = { + DEFINE_PROP_UINT64("ram-addr", AwH3DramCtlState, ram_addr, 0x0), + DEFINE_PROP_UINT32("ram-size", AwH3DramCtlState, ram_size, 256 * MiB), + DEFINE_PROP_END_OF_LIST() +}; + +static const VMStateDescription allwinner_h3_dramc_vmstate = { + .name = "allwinner-h3-dramc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(dramcom, AwH3DramCtlState, AW_H3_DRAMCOM_REGS_NUM), + VMSTATE_UINT32_ARRAY(dramctl, AwH3DramCtlState, AW_H3_DRAMCTL_REGS_NUM), + VMSTATE_UINT32_ARRAY(dramphy, AwH3DramCtlState, AW_H3_DRAMPHY_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_h3_dramc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_h3_dramc_reset; + dc->vmsd = &allwinner_h3_dramc_vmstate; + dc->realize = allwinner_h3_dramc_realize; + device_class_set_props(dc, allwinner_h3_dramc_properties); +} + +static const TypeInfo allwinner_h3_dramc_info = { + .name = TYPE_AW_H3_DRAMC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_h3_dramc_init, + .instance_size = sizeof(AwH3DramCtlState), + .class_init = allwinner_h3_dramc_class_init, +}; + +static void allwinner_h3_dramc_register(void) +{ + type_register_static(&allwinner_h3_dramc_info); +} + +type_init(allwinner_h3_dramc_register) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_cpucfg_cpu_reset(uint8_t cpu_id, uint32_t reset_addr) "id %u, reset_ad allwinner_cpucfg_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 allwinner_cpucfg_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +# allwinner-h3-dramc.c +allwinner_h3_dramc_rowmirror_disable(void) "Disable row mirror" +allwinner_h3_dramc_rowmirror_enable(uint64_t addr) "Enable row mirror: addr 0x%" PRIx64 +allwinner_h3_dramcom_read(uint64_t offset, uint64_t data, unsigned size) "Read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_h3_dramcom_write(uint64_t offset, uint64_t data, unsigned size) "Write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_h3_dramctl_read(uint64_t offset, uint64_t data, unsigned size) "Read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_h3_dramctl_write(uint64_t offset, uint64_t data, unsigned size) "Write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_h3_dramphy_read(uint64_t offset, uint64_t data, unsigned size) "Read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_h3_dramphy_write(uint64_t offset, uint64_t data, unsigned size) "write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 + # allwinner-sid.c allwinner_sid_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> Allwinner System-on-Chips usually contain a Real Time Clock (RTC) for non-volatile system date and time keeping. This commit adds a generic Allwinner RTC device that supports the RTC devices found in Allwinner SoC family sun4i (A10), sun7i (A20) and sun6i and newer (A31, H2+, H3, etc). The following RTC functionality and features are implemented: * Year-Month-Day read/write * Hour-Minute-Second read/write * General Purpose storage The following boards are extended with the RTC device: * Cubieboard (hw/arm/cubieboard.c) * Orange Pi PC (hw/arm/orangepi.c) Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-13-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/rtc/Makefile.objs | 1 + include/hw/arm/allwinner-a10.h | 2 + include/hw/arm/allwinner-h3.h | 3 + include/hw/rtc/allwinner-rtc.h | 134 +++++++++++ hw/arm/allwinner-a10.c | 8 + hw/arm/allwinner-h3.c | 9 +- hw/rtc/allwinner-rtc.c | 411 +++++++++++++++++++++++++++++++++ hw/rtc/trace-events | 4 + 8 files changed, 571 insertions(+), 1 deletion(-) create mode 100644 include/hw/rtc/allwinner-rtc.h create mode 100644 hw/rtc/allwinner-rtc.c diff --git a/hw/rtc/Makefile.objs b/hw/rtc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/Makefile.objs +++ b/hw/rtc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MC146818RTC) += mc146818rtc.o common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o common-obj-$(CONFIG_ASPEED_SOC) += aspeed_rtc.o common-obj-$(CONFIG_GOLDFISH_RTC) += goldfish_rtc.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-rtc.o diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/ide/ahci.h" #include "hw/usb/hcd-ohci.h" #include "hw/usb/hcd-ehci.h" +#include "hw/rtc/allwinner-rtc.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ typedef struct AwA10State { AwEmacState emac; AllwinnerAHCIState sata; AwSdHostState mmc0; + AwRtcState rtc; MemoryRegion sram_a; EHCISysBusState ehci[AW_A10_NUM_USB]; OHCISysBusState ohci[AW_A10_NUM_USB]; diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-sid.h" #include "hw/sd/allwinner-sdhost.h" #include "hw/net/allwinner-sun8i-emac.h" +#include "hw/rtc/allwinner-rtc.h" #include "target/arm/cpu.h" #include "sysemu/block-backend.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_CPU, AW_H3_GIC_HYP, AW_H3_GIC_VCPU, + AW_H3_RTC, AW_H3_CPUCFG, AW_H3_SDRAM }; @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { AwSidState sid; AwSdHostState mmc0; AwSun8iEmacState emac; + AwRtcState rtc; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/rtc/allwinner-rtc.h b/include/hw/rtc/allwinner-rtc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/rtc/allwinner-rtc.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Real Time Clock emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_RTC_H +#define HW_MISC_ALLWINNER_RTC_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * Constants + * @{ + */ + +/** Highest register address used by RTC device */ +#define AW_RTC_REGS_MAXADDR (0x200) + +/** Total number of known registers */ +#define AW_RTC_REGS_NUM (AW_RTC_REGS_MAXADDR / sizeof(uint32_t)) + +/** @} */ + +/** + * Object model types + * @{ + */ + +/** Generic Allwinner RTC device (abstract) */ +#define TYPE_AW_RTC "allwinner-rtc" + +/** Allwinner RTC sun4i family (A10, A12) */ +#define TYPE_AW_RTC_SUN4I TYPE_AW_RTC "-sun4i" + +/** Allwinner RTC sun6i family and newer (A31, H2+, H3, etc) */ +#define TYPE_AW_RTC_SUN6I TYPE_AW_RTC "-sun6i" + +/** Allwinner RTC sun7i family (A20) */ +#define TYPE_AW_RTC_SUN7I TYPE_AW_RTC "-sun7i" + +/** @} */ + +/** + * Object model macros + * @{ + */ + +#define AW_RTC(obj) \ + OBJECT_CHECK(AwRtcState, (obj), TYPE_AW_RTC) +#define AW_RTC_CLASS(klass) \ + OBJECT_CLASS_CHECK(AwRtcClass, (klass), TYPE_AW_RTC) +#define AW_RTC_GET_CLASS(obj) \ + OBJECT_GET_CLASS(AwRtcClass, (obj), TYPE_AW_RTC) + +/** @} */ + +/** + * Allwinner RTC per-object instance state. + */ +typedef struct AwRtcState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** + * Actual year represented by the device when year counter is zero + * + * Can be overridden by the user using the corresponding 'base-year' + * property. The base year used by the target OS driver can vary, for + * example the Linux driver for sun6i uses 1970 while NetBSD uses 2000. + */ + int base_year; + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_RTC_REGS_NUM]; + +} AwRtcState; + +/** + * Allwinner RTC class-level struct. + * + * This struct is filled by each sunxi device specific code + * such that the generic code can use this struct to support + * all devices. + */ +typedef struct AwRtcClass { + /*< private >*/ + SysBusDeviceClass parent_class; + /*< public >*/ + + /** Defines device specific register map */ + const uint8_t *regmap; + + /** Size of the regmap in bytes */ + size_t regmap_size; + + /** + * Read device specific register + * + * @offset: register offset to read + * @return true if register read successful, false otherwise + */ + bool (*read)(AwRtcState *s, uint32_t offset); + + /** + * Write device specific register + * + * @offset: register offset to write + * @data: value to set in register + * @return true if register write successful, false otherwise + */ + bool (*write)(AwRtcState *s, uint32_t offset, uint32_t data); + +} AwRtcClass; + +#endif /* HW_MISC_ALLWINNER_RTC_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #define AW_A10_EHCI_BASE 0x01c14000 #define AW_A10_OHCI_BASE 0x01c14400 #define AW_A10_SATA_BASE 0x01c18000 +#define AW_A10_RTC_BASE 0x01c20d00 static void aw_a10_init(Object *obj) { @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) sysbus_init_child_obj(obj, "mmc0", &s->mmc0, sizeof(s->mmc0), TYPE_AW_SDHOST_SUN4I); + + sysbus_init_child_obj(obj, "rtc", &s->rtc, sizeof(s->rtc), + TYPE_AW_RTC_SUN4I); } static void aw_a10_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, qdev_get_gpio_in(dev, 32)); object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->mmc0), "sd-bus", &error_abort); + + /* RTC */ + qdev_init_nofail(DEVICE(&s->rtc)); + sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->rtc), 0, AW_A10_RTC_BASE, 10); } static void aw_a10_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_GIC_CPU] = 0x01c82000, [AW_H3_GIC_HYP] = 0x01c84000, [AW_H3_GIC_VCPU] = 0x01c86000, + [AW_H3_RTC] = 0x01f00000, [AW_H3_CPUCFG] = 0x01f01c00, [AW_H3_SDRAM] = 0x40000000 }; @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "csi", 0x01cb0000, 320 * KiB }, { "tve", 0x01e00000, 64 * KiB }, { "hdmi", 0x01ee0000, 128 * KiB }, - { "rtc", 0x01f00000, 1 * KiB }, { "r_timer", 0x01f00800, 1 * KiB }, { "r_intc", 0x01f00c00, 1 * KiB }, { "r_wdog", 0x01f01000, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) "ram-addr", &error_abort); object_property_add_alias(obj, "ram-size", OBJECT(&s->dramc), "ram-size", &error_abort); + + sysbus_init_child_obj(obj, "rtc", &s->rtc, sizeof(s->rtc), + TYPE_AW_RTC_SUN6I); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 1, s->memmap[AW_H3_DRAMCTL]); sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 2, s->memmap[AW_H3_DRAMPHY]); + /* RTC */ + qdev_init_nofail(DEVICE(&s->rtc)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, s->memmap[AW_H3_RTC]); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { create_unimplemented_device(unimplemented[i].device_name, diff --git a/hw/rtc/allwinner-rtc.c b/hw/rtc/allwinner-rtc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/rtc/allwinner-rtc.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Real Time Clock emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu-common.h" +#include "hw/qdev-properties.h" +#include "hw/rtc/allwinner-rtc.h" +#include "trace.h" + +/* RTC registers */ +enum { + REG_LOSC = 1, /* Low Oscillator Control */ + REG_YYMMDD, /* RTC Year-Month-Day */ + REG_HHMMSS, /* RTC Hour-Minute-Second */ + REG_ALARM1_WKHHMMSS, /* Alarm1 Week Hour-Minute-Second */ + REG_ALARM1_EN, /* Alarm1 Enable */ + REG_ALARM1_IRQ_EN, /* Alarm1 IRQ Enable */ + REG_ALARM1_IRQ_STA, /* Alarm1 IRQ Status */ + REG_GP0, /* General Purpose Register 0 */ + REG_GP1, /* General Purpose Register 1 */ + REG_GP2, /* General Purpose Register 2 */ + REG_GP3, /* General Purpose Register 3 */ + + /* sun4i registers */ + REG_ALARM1_DDHHMMSS, /* Alarm1 Day Hour-Minute-Second */ + REG_CPUCFG, /* CPU Configuration Register */ + + /* sun6i registers */ + REG_LOSC_AUTOSTA, /* LOSC Auto Switch Status */ + REG_INT_OSC_PRE, /* Internal OSC Clock Prescaler */ + REG_ALARM0_COUNTER, /* Alarm0 Counter */ + REG_ALARM0_CUR_VLU, /* Alarm0 Counter Current Value */ + REG_ALARM0_ENABLE, /* Alarm0 Enable */ + REG_ALARM0_IRQ_EN, /* Alarm0 IRQ Enable */ + REG_ALARM0_IRQ_STA, /* Alarm0 IRQ Status */ + REG_ALARM_CONFIG, /* Alarm Config */ + REG_LOSC_OUT_GATING, /* LOSC Output Gating Register */ + REG_GP4, /* General Purpose Register 4 */ + REG_GP5, /* General Purpose Register 5 */ + REG_GP6, /* General Purpose Register 6 */ + REG_GP7, /* General Purpose Register 7 */ + REG_RTC_DBG, /* RTC Debug Register */ + REG_GPL_HOLD_OUT, /* GPL Hold Output Register */ + REG_VDD_RTC, /* VDD RTC Regulate Register */ + REG_IC_CHARA, /* IC Characteristics Register */ +}; + +/* RTC register flags */ +enum { + REG_LOSC_YMD = (1 << 7), + REG_LOSC_HMS = (1 << 8), +}; + +/* RTC sun4i register map (offset to name) */ +const uint8_t allwinner_rtc_sun4i_regmap[] = { + [0x0000] = REG_LOSC, + [0x0004] = REG_YYMMDD, + [0x0008] = REG_HHMMSS, + [0x000C] = REG_ALARM1_DDHHMMSS, + [0x0010] = REG_ALARM1_WKHHMMSS, + [0x0014] = REG_ALARM1_EN, + [0x0018] = REG_ALARM1_IRQ_EN, + [0x001C] = REG_ALARM1_IRQ_STA, + [0x0020] = REG_GP0, + [0x0024] = REG_GP1, + [0x0028] = REG_GP2, + [0x002C] = REG_GP3, + [0x003C] = REG_CPUCFG, +}; + +/* RTC sun6i register map (offset to name) */ +const uint8_t allwinner_rtc_sun6i_regmap[] = { + [0x0000] = REG_LOSC, + [0x0004] = REG_LOSC_AUTOSTA, + [0x0008] = REG_INT_OSC_PRE, + [0x0010] = REG_YYMMDD, + [0x0014] = REG_HHMMSS, + [0x0020] = REG_ALARM0_COUNTER, + [0x0024] = REG_ALARM0_CUR_VLU, + [0x0028] = REG_ALARM0_ENABLE, + [0x002C] = REG_ALARM0_IRQ_EN, + [0x0030] = REG_ALARM0_IRQ_STA, + [0x0040] = REG_ALARM1_WKHHMMSS, + [0x0044] = REG_ALARM1_EN, + [0x0048] = REG_ALARM1_IRQ_EN, + [0x004C] = REG_ALARM1_IRQ_STA, + [0x0050] = REG_ALARM_CONFIG, + [0x0060] = REG_LOSC_OUT_GATING, + [0x0100] = REG_GP0, + [0x0104] = REG_GP1, + [0x0108] = REG_GP2, + [0x010C] = REG_GP3, + [0x0110] = REG_GP4, + [0x0114] = REG_GP5, + [0x0118] = REG_GP6, + [0x011C] = REG_GP7, + [0x0170] = REG_RTC_DBG, + [0x0180] = REG_GPL_HOLD_OUT, + [0x0190] = REG_VDD_RTC, + [0x01F0] = REG_IC_CHARA, +}; + +static bool allwinner_rtc_sun4i_read(AwRtcState *s, uint32_t offset) +{ + /* no sun4i specific registers currently implemented */ + return false; +} + +static bool allwinner_rtc_sun4i_write(AwRtcState *s, uint32_t offset, + uint32_t data) +{ + /* no sun4i specific registers currently implemented */ + return false; +} + +static bool allwinner_rtc_sun6i_read(AwRtcState *s, uint32_t offset) +{ + const AwRtcClass *c = AW_RTC_GET_CLASS(s); + + switch (c->regmap[offset]) { + case REG_GP4: /* General Purpose Register 4 */ + case REG_GP5: /* General Purpose Register 5 */ + case REG_GP6: /* General Purpose Register 6 */ + case REG_GP7: /* General Purpose Register 7 */ + return true; + default: + break; + } + return false; +} + +static bool allwinner_rtc_sun6i_write(AwRtcState *s, uint32_t offset, + uint32_t data) +{ + const AwRtcClass *c = AW_RTC_GET_CLASS(s); + + switch (c->regmap[offset]) { + case REG_GP4: /* General Purpose Register 4 */ + case REG_GP5: /* General Purpose Register 5 */ + case REG_GP6: /* General Purpose Register 6 */ + case REG_GP7: /* General Purpose Register 7 */ + return true; + default: + break; + } + return false; +} + +static uint64_t allwinner_rtc_read(void *opaque, hwaddr offset, + unsigned size) +{ + AwRtcState *s = AW_RTC(opaque); + const AwRtcClass *c = AW_RTC_GET_CLASS(s); + uint64_t val = 0; + + if (offset >= c->regmap_size) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + if (!c->regmap[offset]) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid register 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + switch (c->regmap[offset]) { + case REG_LOSC: /* Low Oscillator Control */ + val = s->regs[REG_LOSC]; + s->regs[REG_LOSC] &= ~(REG_LOSC_YMD | REG_LOSC_HMS); + break; + case REG_YYMMDD: /* RTC Year-Month-Day */ + case REG_HHMMSS: /* RTC Hour-Minute-Second */ + case REG_GP0: /* General Purpose Register 0 */ + case REG_GP1: /* General Purpose Register 1 */ + case REG_GP2: /* General Purpose Register 2 */ + case REG_GP3: /* General Purpose Register 3 */ + val = s->regs[c->regmap[offset]]; + break; + default: + if (!c->read(s, offset)) { + qemu_log_mask(LOG_UNIMP, "%s: unimplemented register 0x%04x\n", + __func__, (uint32_t)offset); + } + val = s->regs[c->regmap[offset]]; + break; + } + + trace_allwinner_rtc_read(offset, val); + return val; +} + +static void allwinner_rtc_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwRtcState *s = AW_RTC(opaque); + const AwRtcClass *c = AW_RTC_GET_CLASS(s); + + if (offset >= c->regmap_size) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + if (!c->regmap[offset]) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid register 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + trace_allwinner_rtc_write(offset, val); + + switch (c->regmap[offset]) { + case REG_YYMMDD: /* RTC Year-Month-Day */ + s->regs[REG_YYMMDD] = val; + s->regs[REG_LOSC] |= REG_LOSC_YMD; + break; + case REG_HHMMSS: /* RTC Hour-Minute-Second */ + s->regs[REG_HHMMSS] = val; + s->regs[REG_LOSC] |= REG_LOSC_HMS; + break; + case REG_GP0: /* General Purpose Register 0 */ + case REG_GP1: /* General Purpose Register 1 */ + case REG_GP2: /* General Purpose Register 2 */ + case REG_GP3: /* General Purpose Register 3 */ + s->regs[c->regmap[offset]] = val; + break; + default: + if (!c->write(s, offset, val)) { + qemu_log_mask(LOG_UNIMP, "%s: unimplemented register 0x%04x\n", + __func__, (uint32_t)offset); + } + break; + } +} + +static const MemoryRegionOps allwinner_rtc_ops = { + .read = allwinner_rtc_read, + .write = allwinner_rtc_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_rtc_reset(DeviceState *dev) +{ + AwRtcState *s = AW_RTC(dev); + struct tm now; + + /* Clear registers */ + memset(s->regs, 0, sizeof(s->regs)); + + /* Get current datetime */ + qemu_get_timedate(&now, 0); + + /* Set RTC with current datetime */ + if (s->base_year > 1900) { + s->regs[REG_YYMMDD] = ((now.tm_year + 1900 - s->base_year) << 16) | + ((now.tm_mon + 1) << 8) | + now.tm_mday; + s->regs[REG_HHMMSS] = (((now.tm_wday + 6) % 7) << 29) | + (now.tm_hour << 16) | + (now.tm_min << 8) | + now.tm_sec; + } +} + +static void allwinner_rtc_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwRtcState *s = AW_RTC(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_rtc_ops, s, + TYPE_AW_RTC, 1 * KiB); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_rtc_vmstate = { + .name = "allwinner-rtc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwRtcState, AW_RTC_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static Property allwinner_rtc_properties[] = { + DEFINE_PROP_INT32("base-year", AwRtcState, base_year, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void allwinner_rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_rtc_reset; + dc->vmsd = &allwinner_rtc_vmstate; + device_class_set_props(dc, allwinner_rtc_properties); +} + +static void allwinner_rtc_sun4i_init(Object *obj) +{ + AwRtcState *s = AW_RTC(obj); + s->base_year = 2010; +} + +static void allwinner_rtc_sun4i_class_init(ObjectClass *klass, void *data) +{ + AwRtcClass *arc = AW_RTC_CLASS(klass); + + arc->regmap = allwinner_rtc_sun4i_regmap; + arc->regmap_size = sizeof(allwinner_rtc_sun4i_regmap); + arc->read = allwinner_rtc_sun4i_read; + arc->write = allwinner_rtc_sun4i_write; +} + +static void allwinner_rtc_sun6i_init(Object *obj) +{ + AwRtcState *s = AW_RTC(obj); + s->base_year = 1970; +} + +static void allwinner_rtc_sun6i_class_init(ObjectClass *klass, void *data) +{ + AwRtcClass *arc = AW_RTC_CLASS(klass); + + arc->regmap = allwinner_rtc_sun6i_regmap; + arc->regmap_size = sizeof(allwinner_rtc_sun6i_regmap); + arc->read = allwinner_rtc_sun6i_read; + arc->write = allwinner_rtc_sun6i_write; +} + +static void allwinner_rtc_sun7i_init(Object *obj) +{ + AwRtcState *s = AW_RTC(obj); + s->base_year = 1970; +} + +static void allwinner_rtc_sun7i_class_init(ObjectClass *klass, void *data) +{ + AwRtcClass *arc = AW_RTC_CLASS(klass); + allwinner_rtc_sun4i_class_init(klass, arc); +} + +static const TypeInfo allwinner_rtc_info = { + .name = TYPE_AW_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_rtc_init, + .instance_size = sizeof(AwRtcState), + .class_init = allwinner_rtc_class_init, + .class_size = sizeof(AwRtcClass), + .abstract = true, +}; + +static const TypeInfo allwinner_rtc_sun4i_info = { + .name = TYPE_AW_RTC_SUN4I, + .parent = TYPE_AW_RTC, + .class_init = allwinner_rtc_sun4i_class_init, + .instance_init = allwinner_rtc_sun4i_init, +}; + +static const TypeInfo allwinner_rtc_sun6i_info = { + .name = TYPE_AW_RTC_SUN6I, + .parent = TYPE_AW_RTC, + .class_init = allwinner_rtc_sun6i_class_init, + .instance_init = allwinner_rtc_sun6i_init, +}; + +static const TypeInfo allwinner_rtc_sun7i_info = { + .name = TYPE_AW_RTC_SUN7I, + .parent = TYPE_AW_RTC, + .class_init = allwinner_rtc_sun7i_class_init, + .instance_init = allwinner_rtc_sun7i_init, +}; + +static void allwinner_rtc_register(void) +{ + type_register_static(&allwinner_rtc_info); + type_register_static(&allwinner_rtc_sun4i_info); + type_register_static(&allwinner_rtc_sun6i_info); + type_register_static(&allwinner_rtc_sun7i_info); +} + +type_init(allwinner_rtc_register) diff --git a/hw/rtc/trace-events b/hw/rtc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/trace-events +++ b/hw/rtc/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# allwinner-rtc.c +allwinner_rtc_read(uint64_t addr, uint64_t value) "addr 0x%" PRIx64 " value 0x%" PRIx64 +allwinner_rtc_write(uint64_t addr, uint64_t value) "addr 0x%" PRIx64 " value 0x%" PRIx64 + # sun4v-rtc.c sun4v_rtc_read(uint64_t addr, uint64_t value) "read: addr 0x%" PRIx64 " value 0x%" PRIx64 sun4v_rtc_write(uint64_t addr, uint64_t value) "write: addr 0x%" PRIx64 " value 0x%" PRIx64 -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This test boots a Linux kernel on a OrangePi PC board and verify the serial output is working. The kernel image and DeviceTree blob are built by the Armbian project (based on Debian): https://www.armbian.com/orange-pi-pc/ If ARM is a target being built, "make check-acceptance" will automatically include this test by the use of the "arch:arm" tags. Alternatively, this test can be run using: $ make check-venv $ ./tests/venv/bin/avocado --show=console,app run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py JOB ID : 2e4d15eceb13c33672af406f08171e6e9de1414a JOB LOG : ~/job-results/job-2019-12-17T05.46-2e4d15e/job.log (1/1) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi: console: Uncompressing Linux... done, booting the kernel. console: Booting Linux on physical CPU 0x0 console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019 console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d console: CPU: div instructions available: patching division code console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache console: OF: fdt: Machine model: Xunlong Orange Pi PC console: Memory policy: Data cache writealloc console: OF: reserved mem: failed to allocate memory for node 'cma@4a000000' console: cma: Failed to reserve 128 MiB console: psci: probing for conduit method from DT. console: psci: PSCIv0.2 detected in firmware. console: psci: Using standard PSCI v0.2 function IDs console: psci: Trusted OS migration not required console: random: get_random_bytes called from start_kernel+0x8d/0x3c2 with crng_init=0 console: percpu: Embedded 18 pages/cpu @(ptrval) s41228 r8192 d24308 u73728 console: Built 1 zonelists, mobility grouping on. Total pages: 32480 console: Kernel command line: printk.time=0 console=ttyS0,115200 PASS (8.59 s) JOB TIME : 8.81 s Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-14-nieklinnenbank@gmail.com [NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): exec_command_and_wait_for_pattern(self, 'reboot', 'reboot: Restarting system') + def test_arm_orangepi(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:orangepi-pc + """ + deb_url = ('https://apt.armbian.com/pool/main/l/' + 'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb') + deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + kernel_path = self.extract_from_deb(deb_path, + '/boot/vmlinuz-4.20.7-sunxi') + dtb_path = '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb' + dtb_path = self.extract_from_deb(deb_path, dtb_path) + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyS0,115200n8 ' + 'earlycon=uart,mmio32,0x1c28000') + self.vm.add_args('-kernel', kernel_path, + '-dtb', dtb_path, + '-append', kernel_command_line) + self.vm.launch() + console_pattern = 'Kernel command line: %s' % kernel_command_line + self.wait_for_console_pattern(console_pattern) + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This test boots a Linux kernel on a OrangePi PC board and verify the serial output is working. The kernel image and DeviceTree blob are built by the Armbian project (based on Debian): https://www.armbian.com/orange-pi-pc/ The cpio image used comes from the linux-build-test project: https://github.com/groeck/linux-build-test If ARM is a target being built, "make check-acceptance" will automatically include this test by the use of the "arch:arm" tags. Alternatively, this test can be run using: $ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py console: Uncompressing Linux... done, booting the kernel. console: Booting Linux on physical CPU 0x0 console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019 console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d console: CPU: div instructions available: patching division code console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache console: OF: fdt: Machine model: Xunlong Orange Pi PC [...] console: Trying to unpack rootfs image as initramfs... console: Freeing initrd memory: 3256K console: Freeing unused kernel memory: 1024K console: Run /init as init process console: mount: mounting devtmpfs on /dev failed: Device or resource busy console: Starting logging: OK console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read) console: done. console: Starting network: OK console: Found console ttyS0 console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019 console: Boot successful. console: cat /proc/cpuinfo console: / # cat /proc/cpuinfo console: processor : 0 console: model name : ARMv7 Processor rev 5 (v7l) console: BogoMIPS : 125.00 console: Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm console: CPU implementer : 0x41 console: CPU architecture: 7 console: CPU variant : 0x0 console: CPU part : 0xc07 console: CPU revision : 5 [...] console: processor : 3 console: model name : ARMv7 Processor rev 5 (v7l) console: BogoMIPS : 125.00 console: Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm console: CPU implementer : 0x41 console: CPU architecture: 7 console: CPU variant : 0x0 console: CPU part : 0xc07 console: CPU revision : 5 console: Hardware : Allwinner sun8i Family console: Revision : 0000 console: Serial : 0000000000000000 console: cat /proc/iomem console: / # cat /proc/iomem console: 01000000-010fffff : clock@1000000 console: 01c00000-01c00fff : system-control@1c00000 console: 01c02000-01c02fff : dma-controller@1c02000 [...] console: reboot console: / # reboot console: / # Found console ttyS0 console: Stopping network: OK console: hrtimer: interrupt took 21852064 ns console: Saving random seed... random: dd: uninitialized urandom read (512 bytes read) console: done. console: Stopping logging: OK console: umount: devtmpfs busy - remounted read-only console: umount: can't unmount /: Invalid argument console: The system is going down NOW! console: Sent SIGTERM to all processes console: Sent SIGKILL to all processes console: Requesting system reboot console: reboot: Restarting system PASS (48.32 s) JOB TIME : 49.16 s Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-15-nieklinnenbank@gmail.com [NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 40 ++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): console_pattern = 'Kernel command line: %s' % kernel_command_line self.wait_for_console_pattern(console_pattern) + def test_arm_orangepi_initrd(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:orangepi-pc + """ + deb_url = ('https://apt.armbian.com/pool/main/l/' + 'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb') + deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + kernel_path = self.extract_from_deb(deb_path, + '/boot/vmlinuz-4.20.7-sunxi') + dtb_path = '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb' + dtb_path = self.extract_from_deb(deb_path, dtb_path) + initrd_url = ('https://github.com/groeck/linux-build-test/raw/' + '2eb0a73b5d5a28df3170c546ddaaa9757e1e0848/rootfs/' + 'arm/rootfs-armv7a.cpio.gz') + initrd_hash = '604b2e45cdf35045846b8bbfbf2129b1891bdc9c' + initrd_path_gz = self.fetch_asset(initrd_url, asset_hash=initrd_hash) + initrd_path = os.path.join(self.workdir, 'rootfs.cpio') + archive.gzip_uncompress(initrd_path_gz, initrd_path) + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyS0,115200 ' + 'panic=-1 noreboot') + self.vm.add_args('-kernel', kernel_path, + '-dtb', dtb_path, + '-initrd', initrd_path, + '-append', kernel_command_line, + '-no-reboot') + self.vm.launch() + self.wait_for_console_pattern('Boot successful.') + + exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo', + 'Allwinner sun8i Family') + exec_command_and_wait_for_pattern(self, 'cat /proc/iomem', + 'system-control@1c00000') + exec_command_and_wait_for_pattern(self, 'reboot', + 'reboot: Restarting system') + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The kernel image and DeviceTree blob are built by the Armbian project (based on Debian): https://www.armbian.com/orange-pi-pc/ The SD image is from the kernelci.org project: https://kernelci.org/faq/#the-code If ARM is a target being built, "make check-acceptance" will automatically include this test by the use of the "arch:arm" tags. Alternatively, this test can be run using: $ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py console: Uncompressing Linux... done, booting the kernel. console: Booting Linux on physical CPU 0x0 console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019 console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d [...] console: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) console: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2 console: sunxi-mmc 1c0f000.mmc: Got CD GPIO console: ledtrig-cpu: registered to indicate activity on CPUs console: hidraw: raw HID events driver (C) Jiri Kosina console: usbcore: registered new interface driver usbhid console: usbhid: USB HID core driver console: Initializing XFRM netlink socket console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB console: NET: Registered protocol family 10 console: mmc0: host does not support reading read-only switch, assuming write-enable console: mmc0: Problem switching card into high-speed mode! console: mmc0: new SD card at address 4567 console: mmcblk0: mmc0:4567 QEMU! 60.0 MiB [...] console: EXT4-fs (mmcblk0): mounting ext2 file system using the ext4 subsystem console: EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: (null) console: VFS: Mounted root (ext2 filesystem) on device 179:0. console: Run /sbin/init as init process console: EXT4-fs (mmcblk0): re-mounted. Opts: block_validity,barrier,user_xattr,acl console: Starting syslogd: OK console: Starting klogd: OK console: Populating /dev using udev: udevd[203]: starting version 3.2.7 console: /bin/sh: can't access tty; job control turned off console: cat /proc/partitions console: / # cat /proc/partitions console: major minor #blocks name console: 1 0 4096 ram0 console: 1 1 4096 ram1 console: 1 2 4096 ram2 console: 1 3 4096 ram3 console: 179 0 61440 mmcblk0 console: reboot console: / # reboot console: umount: devtmpfs busy - remounted read-only console: EXT4-fs (mmcblk0): re-mounted. Opts: (null) console: The system is going down NOW! console: Sent SIGTERM to all processes console: Sent SIGKILL to all processes console: Requesting system reboot console: reboot: Restarting system JOB TIME : 68.64 s Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-16-nieklinnenbank@gmail.com [NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()] [NL: extend test with ethernet device checks] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 47 ++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): exec_command_and_wait_for_pattern(self, 'reboot', 'reboot: Restarting system') + def test_arm_orangepi_sd(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:orangepi-pc + """ + deb_url = ('https://apt.armbian.com/pool/main/l/' + 'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb') + deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + kernel_path = self.extract_from_deb(deb_path, + '/boot/vmlinuz-4.20.7-sunxi') + dtb_path = '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb' + dtb_path = self.extract_from_deb(deb_path, dtb_path) + rootfs_url = ('http://storage.kernelci.org/images/rootfs/buildroot/' + 'kci-2019.02/armel/base/rootfs.ext2.xz') + rootfs_hash = '692510cb625efda31640d1de0a8d60e26040f061' + rootfs_path_xz = self.fetch_asset(rootfs_url, asset_hash=rootfs_hash) + rootfs_path = os.path.join(self.workdir, 'rootfs.cpio') + archive.lzma_uncompress(rootfs_path_xz, rootfs_path) + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyS0,115200 ' + 'root=/dev/mmcblk0 rootwait rw ' + 'panic=-1 noreboot') + self.vm.add_args('-kernel', kernel_path, + '-dtb', dtb_path, + '-drive', 'file=' + rootfs_path + ',if=sd,format=raw', + '-append', kernel_command_line, + '-no-reboot') + self.vm.launch() + shell_ready = "/bin/sh: can't access tty; job control turned off" + self.wait_for_console_pattern(shell_ready) + + exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo', + 'Allwinner sun8i Family') + exec_command_and_wait_for_pattern(self, 'cat /proc/partitions', + 'mmcblk0') + exec_command_and_wait_for_pattern(self, 'ifconfig eth0 up', + 'eth0: Link is Up') + exec_command_and_wait_for_pattern(self, 'udhcpc eth0', + 'udhcpc: lease of 10.0.2.15 obtained') + exec_command_and_wait_for_pattern(self, 'ping -c 3 10.0.2.2', + '3 packets transmitted, 3 packets received, 0% packet loss') + exec_command_and_wait_for_pattern(self, 'reboot', + 'reboot: Restarting system') + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This test boots Ubuntu Bionic on a OrangePi PC board. As it requires 1GB of storage, and is slow, this test is disabled on automatic CI testing. It is useful for workstation testing. Currently Avocado timeouts too quickly, so we can't run userland commands. The kernel image and DeviceTree blob are built by the Armbian project (based on Debian): https://www.armbian.com/orange-pi-pc/ The Ubuntu image is downloaded from: https://dl.armbian.com/orangepipc/Bionic_current This test can be run using: $ AVOCADO_ALLOW_LARGE_STORAGE=yes \ avocado --show=app,console run -t machine:orangepi-pc \ tests/acceptance/boot_linux_console.py console: U-Boot SPL 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100) console: DRAM: 1024 MiB console: Failed to set core voltage! Can't set CPU frequency console: Trying to boot from MMC1 console: U-Boot 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100) Allwinner Technology console: CPU: Allwinner H3 (SUN8I 0000) console: Model: Xunlong Orange Pi PC console: DRAM: 1 GiB console: MMC: mmc@1c0f000: 0 [...] console: Uncompressing Linux... done, booting the kernel. console: Booting Linux on physical CPU 0x0 console: Linux version 5.3.9-sunxi (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #19.11.3 SMP Mon Nov 18 18:49:43 CET 2019 console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d console: CPU: div instructions available: patching division code console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache console: OF: fdt: Machine model: Xunlong Orange Pi PC [...] console: EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) console: done. console: Begin: Running /scripts/local-bottom ... done. console: Begin: Running /scripts/init-bottom ... done. console: systemd[1]: systemd 237 running in system mode. (...) console: systemd[1]: Detected architecture arm. console: Welcome to Ubuntu 18.04.3 LTS! console: systemd[1]: Set hostname to <orangepipc>. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-17-nieklinnenbank@gmail.com [NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()] [NL: changed test to boot from SD card via BootROM, added check for 7z] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 48 ++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ from avocado_qemu import exec_command_and_wait_for_pattern from avocado_qemu import wait_for_console_pattern from avocado.utils import process from avocado.utils import archive +from avocado.utils.path import find_command, CmdNotFoundError +P7ZIP_AVAILABLE = True +try: + find_command('7z') +except CmdNotFoundError: + P7ZIP_AVAILABLE = False class BootLinuxConsole(Test): """ @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): exec_command_and_wait_for_pattern(self, 'reboot', 'reboot: Restarting system') + @skipUnless(os.getenv('AVOCADO_ALLOW_LARGE_STORAGE'), 'storage limited') + @skipUnless(P7ZIP_AVAILABLE, '7z not installed') + def test_arm_orangepi_bionic(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:orangepi-pc + """ + + # This test download a 196MB compressed image and expand it to 932MB... + image_url = ('https://dl.armbian.com/orangepipc/archive/' + 'Armbian_19.11.3_Orangepipc_bionic_current_5.3.9.7z') + image_hash = '196a8ffb72b0123d92cea4a070894813d305c71e' + image_path_7z = self.fetch_asset(image_url, asset_hash=image_hash) + image_name = 'Armbian_19.11.3_Orangepipc_bionic_current_5.3.9.img' + image_path = os.path.join(self.workdir, image_name) + process.run("7z e -o%s %s" % (self.workdir, image_path_7z)) + + self.vm.set_console() + self.vm.add_args('-drive', 'file=' + image_path + ',if=sd,format=raw', + '-nic', 'user', + '-no-reboot') + self.vm.launch() + + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyS0,115200 ' + 'loglevel=7 ' + 'nosmp ' + 'systemd.default_timeout_start_sec=9000 ' + 'systemd.mask=armbian-zram-config.service ' + 'systemd.mask=armbian-ramlog.service') + + self.wait_for_console_pattern('U-Boot SPL') + self.wait_for_console_pattern('Autoboot in ') + exec_command_and_wait_for_pattern(self, ' ', '=>') + exec_command_and_wait_for_pattern(self, "setenv extraargs '" + + kernel_command_line + "'", '=>') + exec_command_and_wait_for_pattern(self, 'boot', 'Starting kernel ...'); + + self.wait_for_console_pattern('systemd[1]: Set hostname ' + + 'to <orangepipc>') + self.wait_for_console_pattern('Starting Load Kernel Modules...') + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This test boots U-Boot then NetBSD (stored on a SD card) on a OrangePi PC board. As it requires ~1.3GB of storage, it is disabled by default. U-Boot is built by the Debian project [1], and the SD card image is provided by the NetBSD organization [2]. Once the compressed SD card image is downloaded (304MB) and extracted, this test is fast: $ AVOCADO_ALLOW_LARGE_STORAGE=yes \ avocado --show=app,console run -t machine:orangepi-pc \ tests/acceptance/boot_linux_console.py console: U-Boot SPL 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000) console: DRAM: 1024 MiB console: U-Boot 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000) Allwinner Technology console: CPU: Allwinner H3 (SUN8I 0000) console: scanning bus usb@1c1b000 for devices... 1 USB Device(s) found console: scanning bus usb@1c1d000 for devices... 1 USB Device(s) found console: scanning usb for storage devices... 0 Storage Device(s) found console: Hit any key to stop autoboot: 0 console: => setenv bootargs root=ld0a console: => setenv kernel netbsd-GENERIC.ub console: => setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb console: => boot console: ## Booting kernel from Legacy Image at 42000000 ... console: Image Name: NetBSD/earmv7hf 9.0_RC1 console: Image Type: ARM Linux Kernel Image (no loading done) (uncompressed) console: XIP Kernel Image (no loading done) console: Loading Device Tree to 49ff6000, end 49fffe01 ... OK console: Starting kernel ... console: [ 1.0000000] NetBSD/evbarm (fdt) booting ... console: [ 1.0000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020 console: [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/evbarm/compile/GENERIC console: [ 1.0000000] total memory = 1024 MB console: [ 1.0000000] avail memory = 1003 MB console: [ 1.0000000] armfdt0 (root) console: [ 1.0000000] simplebus0 at armfdt0: Xunlong Orange Pi PC console: [ 1.0000000] cpu0 at cpus0: Cortex-A7 r0p5 (Cortex V7A core) console: [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled console: [ 1.0000000] cpu0: 32KB/64B 2-way L1 VIPT Instruction cache console: [ 1.0000000] cpu0: 32KB/64B 2-way write-back-locking-C L1 PIPT Data cache console: [ 1.0000000] cpu0: 2304KB/64B 16-way write-through L2 PIPT Unified cache console: [ 1.0000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals ... console: [ 2.3812082] sdmmc0: SD card status: 4-bit, C0 console: [ 2.3812082] ld0 at sdmmc0: <0xaa:0x5859:QEMU!:0x01:0xdeadbeef:0x062> console: [ 2.4012856] ld0: 1226 MB, 622 cyl, 64 head, 63 sec, 512 bytes/sect x 2511872 sectors console: [ 2.5321222] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz console: [ 3.1068718] WARNING: 4 errors while detecting hardware; check system log. console: [ 3.1179868] boot device: ld0 console: [ 3.1470623] root on ld0a dumps on ld0b console: [ 3.2464436] root file system type: ffs console: [ 3.2897123] kern.module.path=/stand/evbarm/9.0/modules console: Mon Feb 17 20:33:35 UTC 2020 console: Starting root file system check: PASS (35.96 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 36.09 s Note, this test only took ~65 seconds to run on Travis-CI, see: [3]. This test is based on a description from Niek Linnenbank from [4]. [1] https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot [2] https://wiki.netbsd.org/ports/evbarm/allwinner/ [3] https://travis-ci.org/philmd/qemu/jobs/638823612#L3778 [4] https://www.mail-archive.com/qemu-devel@nongnu.org/msg669347.html Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-18-nieklinnenbank@gmail.com [NL: changed test to use NetBSD 9.0 final release and -global allwinner-rtc.base-year] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 70 ++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ import shutil from avocado import skipUnless from avocado_qemu import Test from avocado_qemu import exec_command_and_wait_for_pattern +from avocado_qemu import interrupt_interactive_console_until_pattern from avocado_qemu import wait_for_console_pattern from avocado.utils import process from avocado.utils import archive @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): 'to <orangepipc>') self.wait_for_console_pattern('Starting Load Kernel Modules...') + @skipUnless(os.getenv('AVOCADO_ALLOW_LARGE_STORAGE'), 'storage limited') + def test_arm_orangepi_uboot_netbsd9(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:orangepi-pc + """ + # This test download a 304MB compressed image and expand it to 1.3GB... + deb_url = ('http://snapshot.debian.org/archive/debian/' + '20200108T145233Z/pool/main/u/u-boot/' + 'u-boot-sunxi_2020.01%2Bdfsg-1_armhf.deb') + deb_hash = 'f67f404a80753ca3d1258f13e38f2b060e13db99' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + # We use the common OrangePi PC 'plus' build of U-Boot for our secondary + # program loader (SPL). We will then set the path to the more specific + # OrangePi "PC" device tree blob with 'setenv fdtfile' in U-Boot prompt, + # before to boot NetBSD. + uboot_path = '/usr/lib/u-boot/orangepi_plus/u-boot-sunxi-with-spl.bin' + uboot_path = self.extract_from_deb(deb_path, uboot_path) + image_url = ('https://cdn.netbsd.org/pub/NetBSD/NetBSD-9.0/' + 'evbarm-earmv7hf/binary/gzimg/armv7.img.gz') + image_hash = '2babb29d36d8360adcb39c09e31060945259917a' + image_path_gz = self.fetch_asset(image_url, asset_hash=image_hash) + image_path = os.path.join(self.workdir, 'armv7.img') + image_drive_args = 'if=sd,format=raw,snapshot=on,file=' + image_path + archive.gzip_uncompress(image_path_gz, image_path) + + # dd if=u-boot-sunxi-with-spl.bin of=armv7.img bs=1K seek=8 conv=notrunc + with open(uboot_path, 'rb') as f_in: + with open(image_path, 'r+b') as f_out: + f_out.seek(8 * 1024) + shutil.copyfileobj(f_in, f_out) + + # Extend image, to avoid that NetBSD thinks the partition + # inside the image is larger than device size itself + f_out.seek(0, 2) + f_out.seek(64 * 1024 * 1024, 1) + f_out.write(bytearray([0x00])) + + self.vm.set_console() + self.vm.add_args('-nic', 'user', + '-drive', image_drive_args, + '-global', 'allwinner-rtc.base-year=2000', + '-no-reboot') + self.vm.launch() + wait_for_console_pattern(self, 'U-Boot 2020.01+dfsg-1') + interrupt_interactive_console_until_pattern(self, + 'Hit any key to stop autoboot:', + 'switch to partitions #0, OK') + + exec_command_and_wait_for_pattern(self, '', '=>') + cmd = 'setenv bootargs root=ld0a' + exec_command_and_wait_for_pattern(self, cmd, '=>') + cmd = 'setenv kernel netbsd-GENERIC.ub' + exec_command_and_wait_for_pattern(self, cmd, '=>') + cmd = 'setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb' + exec_command_and_wait_for_pattern(self, cmd, '=>') + cmd = ("setenv bootcmd 'fatload mmc 0:1 ${kernel_addr_r} ${kernel}; " + "fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}; " + "fdt addr ${fdt_addr_r}; " + "bootm ${kernel_addr_r} - ${fdt_addr_r}'") + exec_command_and_wait_for_pattern(self, cmd, '=>') + + exec_command_and_wait_for_pattern(self, 'boot', + 'Booting kernel from Legacy Image') + wait_for_console_pattern(self, 'Starting kernel ...') + wait_for_console_pattern(self, 'NetBSD 9.0 (GENERIC)') + # Wait for user-space + wait_for_console_pattern(self, 'Starting root file system check') + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Xunlong Orange Pi PC machine is a functional ARM machine based on the Allwinner H3 System-on-Chip. It supports mainline Linux, U-Boot, NetBSD and is covered by acceptance tests. This commit adds a documentation text file with a description of the machine and instructions for the user. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-19-nieklinnenbank@gmail.com [PMM: moved file into docs/system/arm to match the reorg of the arm target part of the docs; tweaked heading to match other boards] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + docs/system/arm/orangepi.rst | 253 +++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 2 + 3 files changed, 256 insertions(+) create mode 100644 docs/system/arm/orangepi.rst diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Maintained F: hw/*/allwinner-h3* F: include/hw/*/allwinner-h3* F: hw/arm/orangepi.c +F: docs/system/orangepi.rst ARM PrimeCell and CMSDK devices M: Peter Maydell <peter.maydell@linaro.org> diff --git a/docs/system/arm/orangepi.rst b/docs/system/arm/orangepi.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/orangepi.rst @@ -XXX,XX +XXX,XX @@ +Orange Pi PC (``orangepi-pc``) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The Xunlong Orange Pi PC is an Allwinner H3 System on Chip +based embedded computer with mainline support in both U-Boot +and Linux. The board comes with a Quad Core Cortex-A7 @ 1.3GHz, +1GiB RAM, 100Mbit ethernet, USB, SD/MMC, USB, HDMI and +various other I/O. + +Supported devices +""""""""""""""""" + +The Orange Pi PC machine supports the following devices: + + * SMP (Quad Core Cortex-A7) + * Generic Interrupt Controller configuration + * SRAM mappings + * SDRAM controller + * Real Time Clock + * Timer device (re-used from Allwinner A10) + * UART + * SD/MMC storage controller + * EMAC ethernet + * USB 2.0 interfaces + * Clock Control Unit + * System Control module + * Security Identifier device + +Limitations +""""""""""" + +Currently, Orange Pi PC does *not* support the following features: + +- Graphical output via HDMI, GPU and/or the Display Engine +- Audio output +- Hardware Watchdog + +Also see the 'unimplemented' array in the Allwinner H3 SoC module +for a complete list of unimplemented I/O devices: ``./hw/arm/allwinner-h3.c`` + +Boot options +"""""""""""" + +The Orange Pi PC machine can start using the standard -kernel functionality +for loading a Linux kernel or ELF executable. Additionally, the Orange Pi PC +machine can also emulate the BootROM which is present on an actual Allwinner H3 +based SoC, which loads the bootloader from a SD card, specified via the -sd argument +to qemu-system-arm. + +Machine-specific options +"""""""""""""""""""""""" + +The following machine-specific options are supported: + +- allwinner-rtc.base-year=YYYY + + The Allwinner RTC device is automatically created by the Orange Pi PC machine + and uses a default base year value which can be overridden using the 'base-year' property. + The base year is the actual represented year when the RTC year value is zero. + This option can be used in case the target operating system driver uses a different + base year value. The minimum value for the base year is 1900. + +- allwinner-sid.identifier=abcd1122-a000-b000-c000-12345678ffff + + The Security Identifier value can be read by the guest. + For example, U-Boot uses it to determine a unique MAC address. + +The above machine-specific options can be specified in qemu-system-arm +via the '-global' argument, for example: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -sd mycard.img \ + -global allwinner-rtc.base-year=2000 + +Running mainline Linux +"""""""""""""""""""""" + +Mainline Linux kernels from 4.19 up to latest master are known to work. +To build a Linux mainline kernel that can be booted by the Orange Pi PC machine, +simply configure the kernel using the sunxi_defconfig configuration: + +.. code-block:: bash + + $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make mrproper + $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make sunxi_defconfig + +To be able to use USB storage, you need to manually enable the corresponding +configuration item. Start the kconfig configuration tool: + +.. code-block:: bash + + $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make menuconfig + +Navigate to the following item, enable it and save your configuration: + + Device Drivers > USB support > USB Mass Storage support + +Build the Linux kernel with: + +.. code-block:: bash + + $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make + +To boot the newly build linux kernel in QEMU with the Orange Pi PC machine, use: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -nic user -nographic \ + -kernel /path/to/linux/arch/arm/boot/zImage \ + -append 'console=ttyS0,115200' \ + -dtb /path/to/linux/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb + +Orange Pi PC images +""""""""""""""""""" + +Note that the mainline kernel does not have a root filesystem. You may provide it +with an official Orange Pi PC image from the official website: + + http://www.orangepi.org/downloadresources/ + +Another possibility is to run an Armbian image for Orange Pi PC which +can be downloaded from: + + https://www.armbian.com/orange-pi-pc/ + +Alternatively, you can also choose to build you own image with buildroot +using the orangepi_pc_defconfig. Also see https://buildroot.org for more information. + +You can choose to attach the selected image either as an SD card or as USB mass storage. +For example, to boot using the Orange Pi PC Debian image on SD card, simply add the -sd +argument and provide the proper root= kernel parameter: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -nic user -nographic \ + -kernel /path/to/linux/arch/arm/boot/zImage \ + -append 'console=ttyS0,115200 root=/dev/mmcblk0p2' \ + -dtb /path/to/linux/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb \ + -sd OrangePi_pc_debian_stretch_server_linux5.3.5_v1.0.img + +To attach the image as an USB mass storage device to the machine, +simply append to the command: + +.. code-block:: bash + + -drive if=none,id=stick,file=myimage.img \ + -device usb-storage,bus=usb-bus.0,drive=stick + +Instead of providing a custom Linux kernel via the -kernel command you may also +choose to let the Orange Pi PC machine load the bootloader from SD card, just like +a real board would do using the BootROM. Simply pass the selected image via the -sd +argument and remove the -kernel, -append, -dbt and -initrd arguments: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -nic user -nographic \ + -sd Armbian_19.11.3_Orangepipc_buster_current_5.3.9.img + +Note that both the official Orange Pi PC images and Armbian images start +a lot of userland programs via systemd. Depending on the host hardware and OS, +they may be slow to emulate, especially due to emulating the 4 cores. +To help reduce the performance slow down due to emulating the 4 cores, you can +give the following kernel parameters via U-Boot (or via -append): + +.. code-block:: bash + + => setenv extraargs 'systemd.default_timeout_start_sec=9000 loglevel=7 nosmp console=ttyS0,115200' + +Running U-Boot +"""""""""""""" + +U-Boot mainline can be build and configured using the orangepi_pc_defconfig +using similar commands as describe above for Linux. Note that it is recommended +for development/testing to select the following configuration setting in U-Boot: + + Device Tree Control > Provider for DTB for DT Control > Embedded DTB + +To start U-Boot using the Orange Pi PC machine, provide the +u-boot binary to the -kernel argument: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -nic user -nographic \ + -kernel /path/to/uboot/u-boot -sd disk.img + +Use the following U-boot commands to load and boot a Linux kernel from SD card: + +.. code-block:: bash + + => setenv bootargs console=ttyS0,115200 + => ext2load mmc 0 0x42000000 zImage + => ext2load mmc 0 0x43000000 sun8i-h3-orangepi-pc.dtb + => bootz 0x42000000 - 0x43000000 + +Running NetBSD +"""""""""""""" + +The NetBSD operating system also includes support for Allwinner H3 based boards, +including the Orange Pi PC. NetBSD 9.0 is known to work best for the Orange Pi PC +board and provides a fully working system with serial console, networking and storage. +For the Orange Pi PC machine, get the 'evbarm-earmv7hf' based image from: + + https://cdn.netbsd.org/pub/NetBSD/NetBSD-9.0/evbarm-earmv7hf/binary/gzimg/armv7.img.gz + +The image requires manually installing U-Boot in the image. Build U-Boot with +the orangepi_pc_defconfig configuration as described in the previous section. +Next, unzip the NetBSD image and write the U-Boot binary including SPL using: + +.. code-block:: bash + + $ gunzip armv7.img.gz + $ dd if=/path/to/u-boot-sunxi-with-spl.bin of=armv7.img bs=1024 seek=8 conv=notrunc + +Finally, before starting the machine the SD image must be extended such +that the NetBSD kernel will not conclude the NetBSD partition is larger than +the emulated SD card: + +.. code-block:: bash + + $ dd if=/dev/zero bs=1M count=64 >> armv7.img + +Start the machine using the following command: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -nic user -nographic \ + -sd armv7.img -global allwinner-rtc.base-year=2000 + +At the U-Boot stage, interrupt the automatic boot process by pressing a key +and set the following environment variables before booting: + +.. code-block:: bash + + => setenv bootargs root=ld0a + => setenv kernel netbsd-GENERIC.ub + => setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb + => setenv bootcmd 'fatload mmc 0:1 ${kernel_addr_r} ${kernel}; fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}; fdt addr ${fdt_addr_r}; bootm ${kernel_addr_r} - ${fdt_addr_r}' + +Optionally you may save the environment variables to SD card with 'saveenv'. +To continue booting simply give the 'boot' command and NetBSD boots. + +Orange Pi PC acceptance tests +""""""""""""""""""""""""""""" + +The Orange Pi PC machine has several acceptance tests included. +To run the whole set of tests, build QEMU from source and simply +provide the following command: + +.. code-block:: bash + + $ AVOCADO_ALLOW_LARGE_STORAGE=yes avocado --show=app,console run \ + -t machine:orangepi-pc tests/acceptance/boot_linux_console.py diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running ``qemu-system-aarch64 --machine help``. .. toctree:: + :maxdepth: 1 arm/integratorcp arm/versatile @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/stellaris arm/musicpal arm/sx1 + arm/orangepi Arm CPU features ================ -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Mention 'max' value in the gic-version property description. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_instance_init(Object *obj) virt_set_gic_version, NULL); object_property_set_description(obj, "gic-version", "Set GIC version. " - "Valid values are 2, 3 and host", NULL); + "Valid values are 2, 3, host and max", + NULL); vms->highmem_ecam = !vmc->no_highmem_ecam; -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> We plan to introduce yet another value for the gic version (nosel). As we already use exotic values such as 0 and -1, let's introduce a dedicated enum type and let vms->gic_version take this type. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 11 +++++++++-- hw/arm/virt.c | 30 +++++++++++++++--------------- 2 files changed, 24 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef enum VirtIOMMUType { VIRT_IOMMU_VIRTIO, } VirtIOMMUType; +typedef enum VirtGICType { + VIRT_GIC_VERSION_MAX, + VIRT_GIC_VERSION_HOST, + VIRT_GIC_VERSION_2, + VIRT_GIC_VERSION_3, +} VirtGICType; + typedef struct MemMapEntry { hwaddr base; hwaddr size; @@ -XXX,XX +XXX,XX @@ typedef struct { bool highmem_ecam; bool its; bool virt; - int32_t gic_version; + VirtGICType gic_version; VirtIOMMUType iommu; uint16_t virtio_iommu_bdf; struct arm_boot_info bootinfo; @@ -XXX,XX +XXX,XX @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) uint32_t redist0_capacity = vms->memmap[VIRT_GIC_REDIST].size / GICV3_REDIST_SIZE; - assert(vms->gic_version == 3); + assert(vms->gic_version == VIRT_GIC_VERSION_3); return vms->smp_cpus > redist0_capacity ? 2 : 1; } diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) irqflags = GIC_FDT_IRQ_FLAGS_EDGE_LO_HI; } - if (vms->gic_version == 2) { + if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << vms->smp_cpus) - 1); @@ -XXX,XX +XXX,XX @@ static void fdt_add_gic_node(VirtMachineState *vms) qemu_fdt_setprop_cell(vms->fdt, nodename, "#address-cells", 0x2); qemu_fdt_setprop_cell(vms->fdt, nodename, "#size-cells", 0x2); qemu_fdt_setprop(vms->fdt, nodename, "ranges", NULL, 0); - if (vms->gic_version == 3) { + if (vms->gic_version == VIRT_GIC_VERSION_3) { int nb_redist_regions = virt_gicv3_redist_region_count(vms); qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", @@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) } } - if (vms->gic_version == 2) { + if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << vms->smp_cpus) - 1); @@ -XXX,XX +XXX,XX @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx) * purposes are to make TCG consistent (with 64-bit KVM hosts) * and to improve SGI efficiency. */ - if (vms->gic_version == 3) { + if (vms->gic_version == VIRT_GIC_VERSION_3) { clustersz = GICV3_TARGETLIST_BITS; } else { clustersz = GIC_TARGETLIST_BITS; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) /* We can probe only here because during property set * KVM is not available yet */ - if (vms->gic_version <= 0) { - /* "host" or "max" */ + if (vms->gic_version == VIRT_GIC_VERSION_HOST || + vms->gic_version == VIRT_GIC_VERSION_MAX) { if (!kvm_enabled()) { - if (vms->gic_version == 0) { + if (vms->gic_version == VIRT_GIC_VERSION_HOST) { error_report("gic-version=host requires KVM"); exit(1); } else { /* "max": currently means 3 for TCG */ - vms->gic_version = 3; + vms->gic_version = VIRT_GIC_VERSION_3; } } else { vms->gic_version = kvm_arm_vgic_probe(); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) /* The maximum number of CPUs depends on the GIC version, or on how * many redistributors we can fit into the memory map. */ - if (vms->gic_version == 3) { + if (vms->gic_version == VIRT_GIC_VERSION_3) { virt_max_cpus = vms->memmap[VIRT_GIC_REDIST].size / GICV3_REDIST_SIZE; virt_max_cpus += @@ -XXX,XX +XXX,XX @@ static void virt_set_its(Object *obj, bool value, Error **errp) static char *virt_get_gic_version(Object *obj, Error **errp) { VirtMachineState *vms = VIRT_MACHINE(obj); - const char *val = vms->gic_version == 3 ? "3" : "2"; + const char *val = vms->gic_version == VIRT_GIC_VERSION_3 ? "3" : "2"; return g_strdup(val); } @@ -XXX,XX +XXX,XX @@ static void virt_set_gic_version(Object *obj, const char *value, Error **errp) VirtMachineState *vms = VIRT_MACHINE(obj); if (!strcmp(value, "3")) { - vms->gic_version = 3; + vms->gic_version = VIRT_GIC_VERSION_3; } else if (!strcmp(value, "2")) { - vms->gic_version = 2; + vms->gic_version = VIRT_GIC_VERSION_2; } else if (!strcmp(value, "host")) { - vms->gic_version = 0; /* Will probe later */ + vms->gic_version = VIRT_GIC_VERSION_HOST; /* Will probe later */ } else if (!strcmp(value, "max")) { - vms->gic_version = -1; /* Will probe later */ + vms->gic_version = VIRT_GIC_VERSION_MAX; /* Will probe later */ } else { error_setg(errp, "Invalid gic-version value"); error_append_hint(errp, "Valid values are 3, 2, host, max.\n"); @@ -XXX,XX +XXX,XX @@ static void virt_instance_init(Object *obj) "physical address space above 32 bits", NULL); /* Default GIC type is v2 */ - vms->gic_version = 2; + vms->gic_version = VIRT_GIC_VERSION_2; object_property_add_str(obj, "gic-version", virt_get_gic_version, virt_set_gic_version, NULL); object_property_set_description(obj, "gic-version", -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Let's move the code which freezes which gic-version to be applied in a dedicated function. We also now set by default the VIRT_GIC_VERSION_NO_SET. This eventually turns into the legacy v2 choice in the finalize() function. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 1 + hw/arm/virt.c | 54 ++++++++++++++++++++++++++----------------- 2 files changed, 34 insertions(+), 21 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef enum VirtGICType { VIRT_GIC_VERSION_HOST, VIRT_GIC_VERSION_2, VIRT_GIC_VERSION_3, + VIRT_GIC_VERSION_NOSEL, } VirtGICType; typedef struct MemMapEntry { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_set_memmap(VirtMachineState *vms) } } +/* + * finalize_gic_version - Determines the final gic_version + * according to the gic-version property + * + * Default GIC type is v2 + */ +static void finalize_gic_version(VirtMachineState *vms) +{ + if (vms->gic_version == VIRT_GIC_VERSION_HOST || + vms->gic_version == VIRT_GIC_VERSION_MAX) { + if (!kvm_enabled()) { + if (vms->gic_version == VIRT_GIC_VERSION_HOST) { + error_report("gic-version=host requires KVM"); + exit(1); + } else { + /* "max": currently means 3 for TCG */ + vms->gic_version = VIRT_GIC_VERSION_3; + } + } else { + vms->gic_version = kvm_arm_vgic_probe(); + if (!vms->gic_version) { + error_report( + "Unable to determine GIC version supported by host"); + exit(1); + } + } + } else if (vms->gic_version == VIRT_GIC_VERSION_NOSEL) { + vms->gic_version = VIRT_GIC_VERSION_2; + } +} + static void machvirt_init(MachineState *machine) { VirtMachineState *vms = VIRT_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) /* We can probe only here because during property set * KVM is not available yet */ - if (vms->gic_version == VIRT_GIC_VERSION_HOST || - vms->gic_version == VIRT_GIC_VERSION_MAX) { - if (!kvm_enabled()) { - if (vms->gic_version == VIRT_GIC_VERSION_HOST) { - error_report("gic-version=host requires KVM"); - exit(1); - } else { - /* "max": currently means 3 for TCG */ - vms->gic_version = VIRT_GIC_VERSION_3; - } - } else { - vms->gic_version = kvm_arm_vgic_probe(); - if (!vms->gic_version) { - error_report( - "Unable to determine GIC version supported by host"); - exit(1); - } - } - } + finalize_gic_version(vms); if (!cpu_type_valid(machine->cpu_type)) { error_report("mach-virt: CPU type %s not supported", machine->cpu_type); @@ -XXX,XX +XXX,XX @@ static void virt_instance_init(Object *obj) "Set on/off to enable/disable using " "physical address space above 32 bits", NULL); - /* Default GIC type is v2 */ - vms->gic_version = VIRT_GIC_VERSION_2; + vms->gic_version = VIRT_GIC_VERSION_NOSEL; object_property_add_str(obj, "gic-version", virt_get_gic_version, virt_set_gic_version, NULL); object_property_set_description(obj, "gic-version", -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Convert kvm_arm_vgic_probe() so that it returns a bitmap of supported in-kernel emulation VGIC versions instead of the max version: at the moment values can be v2 and v3. This allows to expose the case where the host GICv3 also supports GICv2 emulation. This will be useful to choose the default version in KVM accelerated mode. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200311131618.7187-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm_arm.h | 3 +++ hw/arm/virt.c | 11 +++++++++-- target/arm/kvm.c | 14 ++++++++------ 3 files changed, 20 insertions(+), 8 deletions(-) diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "qemu/error-report.h" +#define KVM_ARM_VGIC_V2 (1 << 0) +#define KVM_ARM_VGIC_V3 (1 << 1) + /** * kvm_arm_vcpu_init: * @cs: CPUState diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) vms->gic_version = VIRT_GIC_VERSION_3; } } else { - vms->gic_version = kvm_arm_vgic_probe(); - if (!vms->gic_version) { + int probe_bitmap = kvm_arm_vgic_probe(); + + if (!probe_bitmap) { error_report( "Unable to determine GIC version supported by host"); exit(1); + } else { + if (probe_bitmap & KVM_ARM_VGIC_V3) { + vms->gic_version = VIRT_GIC_VERSION_3; + } else { + vms->gic_version = VIRT_GIC_VERSION_2; + } } } } else if (vms->gic_version == VIRT_GIC_VERSION_NOSEL) { diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ int kvm_arch_irqchip_create(KVMState *s) int kvm_arm_vgic_probe(void) { + int val = 0; + if (kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, true) == 0) { - return 3; - } else if (kvm_create_device(kvm_state, - KVM_DEV_TYPE_ARM_VGIC_V2, true) == 0) { - return 2; - } else { - return 0; + val |= KVM_ARM_VGIC_V3; } + if (kvm_create_device(kvm_state, + KVM_DEV_TYPE_ARM_VGIC_V2, true) == 0) { + val |= KVM_ARM_VGIC_V2; + } + return val; } int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level) -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Restructure the finalize_gic_version with switch cases and clearly separate the following cases: - KVM mode / in-kernel irqchip - KVM mode / userspace irqchip - TCG mode In KVM mode / in-kernel irqchip , we explictly check whether the chosen version is supported by the host. If the end-user explicitly sets v2/v3 and this is not supported by the host, then the user gets an explicit error message. Note that for old kernels where the CREATE_DEVICE ioctl doesn't exist then we will now fail if the user specifically asked for gicv2, where previously we (probably) would have succeeded. In KVM mode / userspace irqchip we immediatly output an error in case the end-user explicitly selected v3. Also we warn the end-user about the unexpected usage of gic-version=host in that case as only userspace GICv2 is supported. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 88 +++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 67 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_set_memmap(VirtMachineState *vms) */ static void finalize_gic_version(VirtMachineState *vms) { - if (vms->gic_version == VIRT_GIC_VERSION_HOST || - vms->gic_version == VIRT_GIC_VERSION_MAX) { - if (!kvm_enabled()) { - if (vms->gic_version == VIRT_GIC_VERSION_HOST) { - error_report("gic-version=host requires KVM"); - exit(1); - } else { - /* "max": currently means 3 for TCG */ - vms->gic_version = VIRT_GIC_VERSION_3; - } - } else { - int probe_bitmap = kvm_arm_vgic_probe(); + if (kvm_enabled()) { + int probe_bitmap; - if (!probe_bitmap) { + if (!kvm_irqchip_in_kernel()) { + switch (vms->gic_version) { + case VIRT_GIC_VERSION_HOST: + warn_report( + "gic-version=host not relevant with kernel-irqchip=off " + "as only userspace GICv2 is supported. Using v2 ..."); + return; + case VIRT_GIC_VERSION_MAX: + case VIRT_GIC_VERSION_NOSEL: + vms->gic_version = VIRT_GIC_VERSION_2; + return; + case VIRT_GIC_VERSION_2: + return; + case VIRT_GIC_VERSION_3: error_report( - "Unable to determine GIC version supported by host"); + "gic-version=3 is not supported with kernel-irqchip=off"); exit(1); - } else { - if (probe_bitmap & KVM_ARM_VGIC_V3) { - vms->gic_version = VIRT_GIC_VERSION_3; - } else { - vms->gic_version = VIRT_GIC_VERSION_2; - } } } - } else if (vms->gic_version == VIRT_GIC_VERSION_NOSEL) { + + probe_bitmap = kvm_arm_vgic_probe(); + if (!probe_bitmap) { + error_report("Unable to determine GIC version supported by host"); + exit(1); + } + + switch (vms->gic_version) { + case VIRT_GIC_VERSION_HOST: + case VIRT_GIC_VERSION_MAX: + if (probe_bitmap & KVM_ARM_VGIC_V3) { + vms->gic_version = VIRT_GIC_VERSION_3; + } else { + vms->gic_version = VIRT_GIC_VERSION_2; + } + return; + case VIRT_GIC_VERSION_NOSEL: + vms->gic_version = VIRT_GIC_VERSION_2; + break; + case VIRT_GIC_VERSION_2: + case VIRT_GIC_VERSION_3: + break; + } + + /* Check chosen version is effectively supported by the host */ + if (vms->gic_version == VIRT_GIC_VERSION_2 && + !(probe_bitmap & KVM_ARM_VGIC_V2)) { + error_report("host does not support in-kernel GICv2 emulation"); + exit(1); + } else if (vms->gic_version == VIRT_GIC_VERSION_3 && + !(probe_bitmap & KVM_ARM_VGIC_V3)) { + error_report("host does not support in-kernel GICv3 emulation"); + exit(1); + } + return; + } + + /* TCG mode */ + switch (vms->gic_version) { + case VIRT_GIC_VERSION_NOSEL: vms->gic_version = VIRT_GIC_VERSION_2; + break; + case VIRT_GIC_VERSION_MAX: + vms->gic_version = VIRT_GIC_VERSION_3; + break; + case VIRT_GIC_VERSION_HOST: + error_report("gic-version=host requires KVM"); + exit(1); + case VIRT_GIC_VERSION_2: + case VIRT_GIC_VERSION_3: + break; } } -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> At the moment if the end-user does not specify the gic-version along with KVM acceleration, v2 is set by default. However most of the systems now have GICv3 and sometimes they do not support GICv2 compatibility. This patch keeps the default v2 selection in all cases except in the KVM accelerated mode when either - the host does not support GICv2 in-kernel emulation or - number of VCPUS exceeds 8. Those cases did not work anyway so we do not break any compatibility. Now we get v3 selected in such a case. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-7-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_set_memmap(VirtMachineState *vms) */ static void finalize_gic_version(VirtMachineState *vms) { + unsigned int max_cpus = MACHINE(vms)->smp.max_cpus; + if (kvm_enabled()) { int probe_bitmap; @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) } return; case VIRT_GIC_VERSION_NOSEL: - vms->gic_version = VIRT_GIC_VERSION_2; + if ((probe_bitmap & KVM_ARM_VGIC_V2) && max_cpus <= GIC_NCPU) { + vms->gic_version = VIRT_GIC_VERSION_2; + } else if (probe_bitmap & KVM_ARM_VGIC_V3) { + /* + * in case the host does not support v2 in-kernel emulation or + * the end-user requested more than 8 VCPUs we now default + * to v3. In any case defaulting to v2 would be broken. + */ + vms->gic_version = VIRT_GIC_VERSION_3; + } else if (max_cpus > GIC_NCPU) { + error_report("host only supports in-kernel GICv2 emulation " + "but more than 8 vcpus are requested"); + exit(1); + } break; case VIRT_GIC_VERSION_2: case VIRT_GIC_VERSION_3: -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> KVM_SET_VCPU_EVENTS might actually lead to vcpu registers being modified. As such this should be the last step of sync to avoid potential overwriting of whatever changes KVM might have done. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200312003401.29017-2-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm32.c | 15 ++++++++++----- target/arm/kvm64.c | 15 ++++++++++----- 2 files changed, 20 insertions(+), 10 deletions(-) diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) return ret; } - ret = kvm_put_vcpu_events(cpu); - if (ret) { - return ret; - } - write_cpustate_to_list(cpu, true); if (!write_list_to_kvmstate(cpu, level)) { return EINVAL; } + /* + * Setting VCPU events should be triggered after syncing the registers + * to avoid overwriting potential changes made by KVM upon calling + * KVM_SET_VCPU_EVENTS ioctl + */ + ret = kvm_put_vcpu_events(cpu); + if (ret) { + return ret; + } + kvm_arm_sync_mpstate_to_kvm(cpu); return ret; diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) return ret; } - ret = kvm_put_vcpu_events(cpu); - if (ret) { - return ret; - } - write_cpustate_to_list(cpu, true); if (!write_list_to_kvmstate(cpu, level)) { return -EINVAL; } + /* + * Setting VCPU events should be triggered after syncing the registers + * to avoid overwriting potential changes made by KVM upon calling + * KVM_SET_VCPU_EVENTS ioctl + */ + ret = kvm_put_vcpu_events(cpu); + if (ret) { + return ret; + } + kvm_arm_sync_mpstate_to_kvm(cpu); return ret; -- 2.20.1