First ARM pullreq of the 2.10 cycle... thanks -- PMM The following changes since commit 64c8ed97cceabac4fafe17fca8d88ef08183f439: Open 2.10 development tree (2017-04-20 15:42:31 +0100) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170420 for you to fetch changes up to f4e8e4edda875cab9df91dc4ae9767f7cb1f50aa: arm: Remove workarounds for old M-profile exception return implementation (2017-04-20 17:39:17 +0100) ---------------------------------------------------------------- target-arm queue: * implement M profile exception return properly * cadence GEM: fix multiqueue handling bugs * pxa2xx.c: QOMify a device * arm/kvm: Remove trailing newlines from error_report() * stellaris: Don't hw_error() on bad register accesses * Add assertion about FSC format for syndrome registers * Move excnames[] array into arm_log_exceptions() * exynos: minor code cleanups * hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account * Fix APSR writes via M profile MSR ---------------------------------------------------------------- Alistair Francis (5): cadence_gem: Read the correct queue descriptor cadence_gem: Correct the multi-queue can rx logic cadence_gem: Correct the interupt logic cadence_gem: Make the revision a property xlnx-zynqmp: Set the Cadence GEM revision Ard Biesheuvel (1): hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account Ishani Chugh (1): arm/kvm: Remove trailing newlines from error_report() Krzysztof Kozlowski (3): hw/arm/exynos: Convert fprintf to qemu_log_mask/error_report hw/char/exynos4210_uart: Constify static array and few arguments hw/misc/exynos4210_pmu: Reorder local variables for readability Peter Maydell (13): target/arm: Add missing entries to excnames[] for log strings arm: Move excnames[] array into arm_log_exceptions() target/arm: Add assertion about FSC format for syndrome registers stellaris: Don't hw_error() on bad register accesses arm: Don't implement BXJ on M-profile CPUs arm: Thumb shift operations should not permit interworking branches arm: Factor out "generate right kind of step exception" arm: Move gen_set_condexec() and gen_set_pc_im() up in the file arm: Move condition-failed codepath generation out of if() arm: Abstract out "are we singlestepping" test to utility function arm: Track M profile handler mode state in TB flags arm: Implement M profile exception return properly arm: Remove workarounds for old M-profile exception return implementation Suramya Shah (1): hw/arm: Qomify pxa2xx.c include/hw/net/cadence_gem.h | 1 + target/arm/cpu.h | 10 +++ target/arm/internals.h | 21 ----- target/arm/translate.h | 5 ++ hw/arm/boot.c | 64 ++++++++++++--- hw/arm/exynos4_boards.c | 7 +- hw/arm/pxa2xx.c | 14 ++-- hw/arm/stellaris.c | 60 ++++++++------ hw/arm/xlnx-zynqmp.c | 6 +- hw/char/exynos4210_uart.c | 8 +- hw/misc/exynos4210_pmu.c | 4 +- hw/net/cadence_gem.c | 45 +++++++---- hw/timer/exynos4210_mct.c | 6 +- hw/timer/exynos4210_pwm.c | 13 ++-- hw/timer/exynos4210_rtc.c | 19 ++--- target/arm/cpu.c | 43 +--------- target/arm/helper.c | 19 +++++ target/arm/kvm64.c | 4 +- target/arm/op_helper.c | 23 ++++-- target/arm/translate.c | 181 +++++++++++++++++++++++++++++-------------- 20 files changed, 341 insertions(+), 212 deletions(-) From: Ard Biesheuvel <ard.biesheuvel@linaro.org> The arm64 boot protocol stipulates that the kernel must be loaded TEXT_OFFSET bytes beyond a 2 MB aligned base address, where TEXT_OFFSET could be any 4 KB multiple between 0 and 2 MB, and whose value can be found in the header of the Image file. So after attempts to load the arm64 kernel image as an ELF file or as a U-Boot image have failed (both of which have their own way of specifying the load offset), try to determine the TEXT_OFFSET from the image after loading it but before mapping it as a ROM mapping into the guest address space. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1489414630-21609-1-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 53 insertions(+), 11 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ #define KERNEL_LOAD_ADDR 0x00010000 #define KERNEL64_LOAD_ADDR 0x00080000 +#define ARM64_TEXT_OFFSET_OFFSET 8 +#define ARM64_MAGIC_OFFSET 56 + typedef enum { FIXUP_NONE = 0, /* do nothing */ FIXUP_TERMINATOR, /* end of insns */ @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, return ret; } +static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, + hwaddr *entry) +{ + hwaddr kernel_load_offset = KERNEL64_LOAD_ADDR; + uint8_t *buffer; + int size; + + /* On aarch64, it's the bootloader's job to uncompress the kernel. */ + size = load_image_gzipped_buffer(filename, LOAD_IMAGE_MAX_GUNZIP_BYTES, + &buffer); + + if (size < 0) { + gsize len; + + /* Load as raw file otherwise */ + if (!g_file_get_contents(filename, (char **)&buffer, &len, NULL)) { + return -1; + } + size = len; + } + + /* check the arm64 magic header value -- very old kernels may not have it */ + if (memcmp(buffer + ARM64_MAGIC_OFFSET, "ARM\x64", 4) == 0) { + uint64_t hdrvals[2]; + + /* The arm64 Image header has text_offset and image_size fields at 8 and + * 16 bytes into the Image header, respectively. The text_offset field + * is only valid if the image_size is non-zero. + */ + memcpy(&hdrvals, buffer + ARM64_TEXT_OFFSET_OFFSET, sizeof(hdrvals)); + if (hdrvals[1] != 0) { + kernel_load_offset = le64_to_cpu(hdrvals[0]); + } + } + + *entry = mem_base + kernel_load_offset; + rom_add_blob_fixed(filename, buffer, size, *entry); + + g_free(buffer); + + return size; +} + static void arm_load_kernel_notify(Notifier *notifier, void *data) { CPUState *cs; @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) int is_linux = 0; uint64_t elf_entry, elf_low_addr, elf_high_addr; int elf_machine; - hwaddr entry, kernel_load_offset; + hwaddr entry; static const ARMInsnFixup *primary_loader; ArmLoadKernelNotifier *n = DO_UPCAST(ArmLoadKernelNotifier, notifier, notifier); @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { primary_loader = bootloader_aarch64; - kernel_load_offset = KERNEL64_LOAD_ADDR; elf_machine = EM_AARCH64; } else { primary_loader = bootloader; if (!info->write_board_setup) { primary_loader += BOOTLOADER_NO_BOARD_SETUP_OFFSET; } - kernel_load_offset = KERNEL_LOAD_ADDR; elf_machine = EM_ARM; } @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) kernel_size = load_uimage(info->kernel_filename, &entry, NULL, &is_linux, NULL, NULL); } - /* On aarch64, it's the bootloader's job to uncompress the kernel. */ if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) { - entry = info->loader_start + kernel_load_offset; - kernel_size = load_image_gzipped(info->kernel_filename, entry, - info->ram_size - kernel_load_offset); + kernel_size = load_aarch64_image(info->kernel_filename, + info->loader_start, &entry); is_linux = 1; - } - if (kernel_size < 0) { - entry = info->loader_start + kernel_load_offset; + } else if (kernel_size < 0) { + /* 32-bit ARM */ + entry = info->loader_start + KERNEL_LOAD_ADDR; kernel_size = load_image_targphys(info->kernel_filename, entry, - info->ram_size - kernel_load_offset); + info->ram_size - KERNEL_LOAD_ADDR); is_linux = 1; } if (kernel_size < 0) { -- 2.7.4 From: Krzysztof Kozlowski <krzk@kernel.org> qemu_log_mask() and error_report() are preferred over fprintf() for logging errors. Also remove square brackets [] and additional new line characters in printed messages. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170313184750.429-2-krzk@kernel.org [PMM: wrapped long line] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/exynos4_boards.c | 7 ++++--- hw/timer/exynos4210_mct.c | 6 ++++-- hw/timer/exynos4210_pwm.c | 13 +++++++------ hw/timer/exynos4210_rtc.c | 19 ++++++++++--------- 4 files changed, 25 insertions(+), 20 deletions(-) diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/error-report.h" #include "qemu-common.h" #include "cpu.h" #include "sysemu/sysemu.h" @@ -XXX,XX +XXX,XX @@ static Exynos4210State *exynos4_boards_init_common(MachineState *machine, MachineClass *mc = MACHINE_GET_CLASS(machine); if (smp_cpus != EXYNOS4210_NCPUS && !qtest_enabled()) { - fprintf(stderr, "%s board supports only %d CPU cores. Ignoring smp_cpus" - " value.\n", - mc->name, EXYNOS4210_NCPUS); + error_report("%s board supports only %d CPU cores, ignoring smp_cpus" + " value", + mc->name, EXYNOS4210_NCPUS); } exynos4_board_binfo.ram_size = exynos4_board_ram_size[board_type]; diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/log.h" #include "hw/sysbus.h" #include "qemu/timer.h" #include "qemu/main-loop.h" @@ -XXX,XX +XXX,XX @@ break; case L0_TCNTO: case L1_TCNTO: case L0_ICNTO: case L1_ICNTO: case L0_FRCNTO: case L1_FRCNTO: - fprintf(stderr, "\n[exynos4210.mct: write to RO register " - TARGET_FMT_plx "]\n\n", offset); + qemu_log_mask(LOG_GUEST_ERROR, + "exynos4210.mct: write to RO register " TARGET_FMT_plx, + offset); break; case L0_INT_CSTAT: case L1_INT_CSTAT: diff --git a/hw/timer/exynos4210_pwm.c b/hw/timer/exynos4210_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_pwm.c +++ b/hw/timer/exynos4210_pwm.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/log.h" #include "hw/sysbus.h" #include "qemu/timer.h" #include "qemu-common.h" @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_pwm_read(void *opaque, hwaddr offset, break; default: - fprintf(stderr, - "[exynos4210.pwm: bad read offset " TARGET_FMT_plx "]\n", - offset); + qemu_log_mask(LOG_GUEST_ERROR, + "exynos4210.pwm: bad read offset " TARGET_FMT_plx, + offset); break; } return value; @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_write(void *opaque, hwaddr offset, break; default: - fprintf(stderr, - "[exynos4210.pwm: bad write offset " TARGET_FMT_plx "]\n", - offset); + qemu_log_mask(LOG_GUEST_ERROR, + "exynos4210.pwm: bad write offset " TARGET_FMT_plx, + offset); break; } diff --git a/hw/timer/exynos4210_rtc.c b/hw/timer/exynos4210_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_rtc.c +++ b/hw/timer/exynos4210_rtc.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/log.h" #include "hw/sysbus.h" #include "qemu/timer.h" #include "qemu-common.h" @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_rtc_read(void *opaque, hwaddr offset, break; default: - fprintf(stderr, - "[exynos4210.rtc: bad read offset " TARGET_FMT_plx "]\n", - offset); + qemu_log_mask(LOG_GUEST_ERROR, + "exynos4210.rtc: bad read offset " TARGET_FMT_plx, + offset); break; } return value; @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset, if (value > TICNT_THRESHOLD) { s->reg_ticcnt = value; } else { - fprintf(stderr, - "[exynos4210.rtc: bad TICNT value %u ]\n", - (uint32_t)value); + qemu_log_mask(LOG_GUEST_ERROR, + "exynos4210.rtc: bad TICNT value %u", + (uint32_t)value); } break; @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset, break; default: - fprintf(stderr, - "[exynos4210.rtc: bad write offset " TARGET_FMT_plx "]\n", - offset); + qemu_log_mask(LOG_GUEST_ERROR, + "exynos4210.rtc: bad write offset " TARGET_FMT_plx, + offset); break; } -- 2.7.4 From: Krzysztof Kozlowski <krzk@kernel.org> The static array exynos4210_uart_regs with register values is not modified so it can be made const. Few other functions accept driver or uart state as an argument but they do not change it and do not cast it so this can be made const for code safeness. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Message-id: 20170313184750.429-3-krzk@kernel.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/exynos4210_uart.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/char/exynos4210_uart.c b/hw/char/exynos4210_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/exynos4210_uart.c +++ b/hw/char/exynos4210_uart.c @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210UartReg { uint32_t reset_value; } Exynos4210UartReg; -static Exynos4210UartReg exynos4210_uart_regs[] = { +static const Exynos4210UartReg exynos4210_uart_regs[] = { {"ULCON", ULCON, 0x00000000}, {"UCON", UCON, 0x00003000}, {"UFCON", UFCON, 0x00000000}, @@ -XXX,XX +XXX,XX @@ static uint8_t fifo_retrieve(Exynos4210UartFIFO *q) return ret; } -static int fifo_elements_number(Exynos4210UartFIFO *q) +static int fifo_elements_number(const Exynos4210UartFIFO *q) { if (q->sp < q->rp) { return q->size - q->rp + q->sp; @@ -XXX,XX +XXX,XX @@ static int fifo_elements_number(Exynos4210UartFIFO *q) return q->sp - q->rp; } -static int fifo_empty_elements_number(Exynos4210UartFIFO *q) +static int fifo_empty_elements_number(const Exynos4210UartFIFO *q) { return q->size - fifo_elements_number(q); } @@ -XXX,XX +XXX,XX @@ static void fifo_reset(Exynos4210UartFIFO *q) q->rp = 0; } -static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(Exynos4210UartState *s) +static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState *s) { uint32_t level = 0; uint32_t reg; -- 2.7.4 From: Krzysztof Kozlowski <krzk@kernel.org> Short declaration of 'i' was in the middle of declarations with assignments. Make it a little bit more readable. Additionally switch from "unsigned" to "unsigned int" as this pattern is more widely used. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170313184750.429-4-krzk@kernel.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/exynos4210_pmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/misc/exynos4210_pmu.c b/hw/misc/exynos4210_pmu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/exynos4210_pmu.c +++ b/hw/misc/exynos4210_pmu.c @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_pmu_read(void *opaque, hwaddr offset, unsigned size) { Exynos4210PmuState *s = (Exynos4210PmuState *)opaque; - unsigned i; const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs; + unsigned int i; for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) { if (reg_p->offset == offset) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_pmu_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) { Exynos4210PmuState *s = (Exynos4210PmuState *)opaque; - unsigned i; const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs; + unsigned int i; for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) { if (reg_p->offset == offset) { -- 2.7.4 Recent changes have added new EXCP_ values to ARM but forgot to update the excnames[] array which is used to provide human-readable strings when printing information about the exception for debug logging. Add the missing entries, and add a comment to the list of #defines to help avoid the mistake being repeated in future. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1491486340-25988-1-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 1 + target/arm/internals.h | 2 ++ 2 files changed, 3 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_SEMIHOST 16 /* semihosting call */ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ +/* NB: new EXCP_ defines should be added to the excnames[] array too */ #define ARMV7M_EXCP_RESET 1 #define ARMV7M_EXCP_NMI 2 diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static const char * const excnames[] = { [EXCP_VIRQ] = "Virtual IRQ", [EXCP_VFIQ] = "Virtual FIQ", [EXCP_SEMIHOST] = "Semihosting call", + [EXCP_NOCP] = "v7M NOCP UsageFault", + [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", }; /* Scale factor for generic timers, ie number of ns per tick. -- 2.7.4 The excnames[] array is defined in internals.h because we used to use it from two different source files for handling logging of AArch32 and AArch64 exception entry. Refactoring means that it's now used only in arm_log_exception() in helper.c, so move the array into that function. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1491821097-5647-1-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 2 +- target/arm/internals.h | 23 ----------------------- target/arm/helper.c | 19 +++++++++++++++++++ 3 files changed, 20 insertions(+), 24 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_SEMIHOST 16 /* semihosting call */ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ -/* NB: new EXCP_ defines should be added to the excnames[] array too */ +/* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 #define ARMV7M_EXCP_NMI 2 diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline bool excp_is_internal(int excp) || excp == EXCP_SEMIHOST; } -/* Exception names for debug logging; note that not all of these - * precisely correspond to architectural exceptions. - */ -static const char * const excnames[] = { - [EXCP_UDEF] = "Undefined Instruction", - [EXCP_SWI] = "SVC", - [EXCP_PREFETCH_ABORT] = "Prefetch Abort", - [EXCP_DATA_ABORT] = "Data Abort", - [EXCP_IRQ] = "IRQ", - [EXCP_FIQ] = "FIQ", - [EXCP_BKPT] = "Breakpoint", - [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit", - [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage", - [EXCP_HVC] = "Hypervisor Call", - [EXCP_HYP_TRAP] = "Hypervisor Trap", - [EXCP_SMC] = "Secure Monitor Call", - [EXCP_VIRQ] = "Virtual IRQ", - [EXCP_VFIQ] = "Virtual FIQ", - [EXCP_SEMIHOST] = "Semihosting call", - [EXCP_NOCP] = "v7M NOCP UsageFault", - [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", -}; - /* Scale factor for generic timers, ie number of ns per tick. * This gives a 62.5MHz timer. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) { if (qemu_loglevel_mask(CPU_LOG_INT)) { const char *exc = NULL; + static const char * const excnames[] = { + [EXCP_UDEF] = "Undefined Instruction", + [EXCP_SWI] = "SVC", + [EXCP_PREFETCH_ABORT] = "Prefetch Abort", + [EXCP_DATA_ABORT] = "Data Abort", + [EXCP_IRQ] = "IRQ", + [EXCP_FIQ] = "FIQ", + [EXCP_BKPT] = "Breakpoint", + [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit", + [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage", + [EXCP_HVC] = "Hypervisor Call", + [EXCP_HYP_TRAP] = "Hypervisor Trap", + [EXCP_SMC] = "Secure Monitor Call", + [EXCP_VIRQ] = "Virtual IRQ", + [EXCP_VFIQ] = "Virtual FIQ", + [EXCP_SEMIHOST] = "Semihosting call", + [EXCP_NOCP] = "v7M NOCP UsageFault", + [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", + }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { exc = excnames[idx]; -- 2.7.4 In tlb_fill() we construct a syndrome register value from a fault status register value which is filled in by arm_tlb_fill(). arm_tlb_fill() returns FSR values which might be in the format used with short-format page descriptors, or the format used with long-format (LPAE) descriptors. The syndrome register always uses LPAE-format FSR status codes. It isn't actually possible to end up delivering a syndrome register value to the guest for a fault which is reported with a short-format FSR (that kind of stage 1 fault will only happen for an AArch32 translation regime which doesn't have a syndrome register, and can never be redirected to an AArch64 or Hyp exception level). Add an assertion which checks this, and adjust the code so that we construct a syndrome with an invalid status code, rather than allowing set bits in the FSR input to randomly corrupt other fields in the syndrome. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1491486152-24304-1-git-send-email-peter.maydell@linaro.org --- target/arm/op_helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void tlb_fill(CPUState *cs, target_ulong addr, MMUAccessType access_type, if (unlikely(ret)) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; - uint32_t syn, exc; + uint32_t syn, exc, fsc; unsigned int target_el; bool same_el; @@ -XXX,XX +XXX,XX @@ void tlb_fill(CPUState *cs, target_ulong addr, MMUAccessType access_type, env->cp15.hpfar_el2 = extract64(fi.s2addr, 12, 47) << 4; } same_el = arm_current_el(env) == target_el; - /* AArch64 syndrome does not have an LPAE bit */ - syn = fsr & ~(1 << 9); + + if (fsr & (1 << 9)) { + /* LPAE format fault status register : bottom 6 bits are + * status code in the same form as needed for syndrome + */ + fsc = extract32(fsr, 0, 6); + } else { + /* Short format FSR : this fault will never actually be reported + * to an EL that uses a syndrome register. Check that here, + * and use a (currently) reserved FSR code in case the constructed + * syndrome does leak into the guest somehow. + */ + assert(target_el != 2 && !arm_el_is_aa64(env, target_el)); + fsc = 0x3f; + } /* For insn and data aborts we assume there is no instruction syndrome * information; this is always true for exceptions reported to EL1. */ if (access_type == MMU_INST_FETCH) { - syn = syn_insn_abort(same_el, 0, fi.s1ptw, syn); + syn = syn_insn_abort(same_el, 0, fi.s1ptw, fsc); exc = EXCP_PREFETCH_ABORT; } else { syn = merge_syn_data_abort(env->exception.syndrome, target_el, same_el, fi.s1ptw, - access_type == MMU_DATA_STORE, syn); + access_type == MMU_DATA_STORE, fsc); if (access_type == MMU_DATA_STORE && arm_feature(env, ARM_FEATURE_V6)) { fsr |= (1 << 11); -- 2.7.4 Current recommended style is to log a guest error on bad register accesses, not kill the whole system with hw_error(). Change the hw_error() calls to log as LOG_GUEST_ERROR or LOG_UNIMP or use g_assert_not_reached() as appropriate. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1491486314-25823-1-git-send-email-peter.maydell@linaro.org --- hw/arm/stellaris.c | 60 +++++++++++++++++++++++++++++++++--------------------- 1 file changed, 37 insertions(+), 23 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void gptm_reload(gptm_state *s, int n, int reset) } else if (s->mode[n] == 0xa) { /* PWM mode. Not implemented. */ } else { - hw_error("TODO: 16-bit timer mode 0x%x\n", s->mode[n]); + qemu_log_mask(LOG_UNIMP, + "GPTM: 16-bit timer mode unimplemented: 0x%x\n", + s->mode[n]); + return; } s->tick[n] = tick; timer_mod(s->timer[n], tick); @@ -XXX,XX +XXX,XX @@ static void gptm_tick(void *opaque) } else if (s->mode[n] == 0xa) { /* PWM mode. Not implemented. */ } else { - hw_error("TODO: 16-bit timer mode 0x%x\n", s->mode[n]); + qemu_log_mask(LOG_UNIMP, + "GPTM: 16-bit timer mode unimplemented: 0x%x\n", + s->mode[n]); } gptm_update_irq(s); } @@ -XXX,XX +XXX,XX @@ static void gptm_write(void *opaque, hwaddr offset, s->match_prescale[0] = value; break; default: - hw_error("gptm_write: Bad offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, + "GPTM: read at bad offset 0x%x\n", (int)offset); } gptm_update_irq(s); } @@ -XXX,XX +XXX,XX @@ static int ssys_board_class(const ssys_state *s) } /* for unknown classes, fall through */ default: - hw_error("ssys_board_class: Unknown class 0x%08x\n", did0); + /* This can only happen if the hardwired constant did0 value + * in this board's stellaris_board_info struct is wrong. + */ + g_assert_not_reached(); } } @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, case DID0_CLASS_SANDSTORM: return pllcfg_sandstorm[xtal]; default: - hw_error("ssys_read: Unhandled class for PLLCFG read.\n"); - return 0; + g_assert_not_reached(); } } case 0x070: /* RCC2 */ @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, case 0x1e4: /* USER1 */ return s->user1; default: - hw_error("ssys_read: Bad offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, + "SSYS: read at bad offset 0x%x\n", (int)offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->ldoarst = value; break; default: - hw_error("ssys_write: Bad offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, + "SSYS: write at bad offset 0x%x\n", (int)offset); } ssys_update(s); } @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_i2c_read(void *opaque, hwaddr offset, case 0x20: /* MCR */ return s->mcr; default: - hw_error("strllaris_i2c_read: Bad offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, + "stellaris_i2c: read at bad offset 0x%x\n", (int)offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_write(void *opaque, hwaddr offset, s->mris &= ~value; break; case 0x20: /* MCR */ - if (value & 1) - hw_error( - "stellaris_i2c_write: Loopback not implemented\n"); - if (value & 0x20) - hw_error( - "stellaris_i2c_write: Slave mode not implemented\n"); + if (value & 1) { + qemu_log_mask(LOG_UNIMP, "stellaris_i2c: Loopback not implemented"); + } + if (value & 0x20) { + qemu_log_mask(LOG_UNIMP, + "stellaris_i2c: Slave mode not implemented"); + } s->mcr = value & 0x31; break; default: - hw_error("stellaris_i2c_write: Bad offset 0x%x\n", - (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, + "stellaris_i2c: write at bad offset 0x%x\n", (int)offset); } stellaris_i2c_update(s); } @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, case 0x30: /* SAC */ return s->sac; default: - hw_error("strllaris_adc_read: Bad offset 0x%x\n", - (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, + "stellaris_adc: read at bad offset 0x%x\n", (int)offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_write(void *opaque, hwaddr offset, return; case 0x04: /* SSCTL */ if (value != 6) { - hw_error("ADC: Unimplemented sequence %" PRIx64 "\n", - value); + qemu_log_mask(LOG_UNIMP, + "ADC: Unimplemented sequence %" PRIx64 "\n", + value); } s->ssctl[n] = value; return; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_write(void *opaque, hwaddr offset, s->sspri = value; break; case 0x28: /* PSSI */ - hw_error("Not implemented: ADC sample initiate\n"); + qemu_log_mask(LOG_UNIMP, "ADC: sample initiate unimplemented"); break; case 0x30: /* SAC */ s->sac = value; break; default: - hw_error("stellaris_adc_write: Bad offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, + "stellaris_adc: write at bad offset 0x%x\n", (int)offset); } stellaris_adc_update(s); } -- 2.7.4 From: Ishani Chugh <chugh.ishani@research.iiit.ac.in> Signed-off-by: Ishani Chugh <chugh.ishani@research.iiit.ac.in> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1491629987-6826-1-git-send-email-chugh.ishani@research.iiit.ac.in Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit) * single step at this point so something has gone wrong. */ error_report("%s: guest single-step while debugging unsupported" - " (%"PRIx64", %"PRIx32")\n", + " (%"PRIx64", %"PRIx32")", __func__, env->pc, debug_exit->hsr); return false; } @@ -XXX,XX +XXX,XX @@ bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit) break; } default: - error_report("%s: unhandled debug exit (%"PRIx32", %"PRIx64")\n", + error_report("%s: unhandled debug exit (%"PRIx32", %"PRIx64")", __func__, debug_exit->hsr, env->pc); } -- 2.7.4 From: Suramya Shah <shah.suramya@gmail.com> Signed-off-by: Suramya Shah <shah.suramya@gmail.com> Message-id: 20170415180316.2694-1-shah.suramya@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static void pxa2xx_ssp_reset(DeviceState *d) s->rx_start = s->rx_level = 0; } -static int pxa2xx_ssp_init(SysBusDevice *sbd) +static void pxa2xx_ssp_init(Object *obj) { - DeviceState *dev = DEVICE(sbd); - PXA2xxSSPState *s = PXA2XX_SSP(dev); - + DeviceState *dev = DEVICE(obj); + PXA2xxSSPState *s = PXA2XX_SSP(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); sysbus_init_irq(sbd, &s->irq); - memory_region_init_io(&s->iomem, OBJECT(s), &pxa2xx_ssp_ops, s, + memory_region_init_io(&s->iomem, obj, &pxa2xx_ssp_ops, s, "pxa2xx-ssp", 0x1000); sysbus_init_mmio(sbd, &s->iomem); s->bus = ssi_create_bus(dev, "ssi"); - return 0; } /* Real-Time Clock */ @@ -XXX,XX +XXX,XX @@ PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size) static void pxa2xx_ssp_class_init(ObjectClass *klass, void *data) { - SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass); DeviceClass *dc = DEVICE_CLASS(klass); - sdc->init = pxa2xx_ssp_init; dc->reset = pxa2xx_ssp_reset; dc->vmsd = &vmstate_pxa2xx_ssp; } @@ -XXX,XX +XXX,XX @@ static const TypeInfo pxa2xx_ssp_info = { .name = TYPE_PXA2XX_SSP, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(PXA2xxSSPState), + .instance_init = pxa2xx_ssp_init, .class_init = pxa2xx_ssp_class_init, }; -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> Read the correct descriptor instead of hardcoding the first (q=0). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 988b183dcf951856d8b3379f7e911ec95233bbf4.1491947224.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/cadence_gem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/cadence_gem.c +++ b/hw/net/cadence_gem.c @@ -XXX,XX +XXX,XX @@ static void gem_get_rx_desc(CadenceGEMState *s, int q) { DB_PRINT("read descriptor 0x%x\n", (unsigned)s->rx_desc_addr[q]); /* read current descriptor */ - cpu_physical_memory_read(s->rx_desc_addr[0], - (uint8_t *)s->rx_desc[0], sizeof(s->rx_desc[0])); + cpu_physical_memory_read(s->rx_desc_addr[q], + (uint8_t *)s->rx_desc[q], sizeof(s->rx_desc[q])); /* Descriptor owned by software ? */ if (rx_desc_get_ownership(s->rx_desc[q]) == 1) { -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> Correct the buffer descriptor busy logic to work correctly when using multiple queues. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 8a7e8059984e27d46a276a66299d035a0afd280f.1491947224.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/cadence_gem.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/cadence_gem.c +++ b/hw/net/cadence_gem.c @@ -XXX,XX +XXX,XX @@ static int gem_can_receive(NetClientState *nc) } for (i = 0; i < s->num_priority_queues; i++) { - if (rx_desc_get_ownership(s->rx_desc[i]) == 1) { - if (s->can_rx_state != 2) { - s->can_rx_state = 2; - DB_PRINT("can't receive - busy buffer descriptor (q%d) 0x%x\n", - i, s->rx_desc_addr[i]); - } - return 0; + if (rx_desc_get_ownership(s->rx_desc[i]) != 1) { + break; + } + }; + + if (i == s->num_priority_queues) { + if (s->can_rx_state != 2) { + s->can_rx_state = 2; + DB_PRINT("can't receive - all the buffer descriptors are busy\n"); } + return 0; } if (s->can_rx_state != 0) { -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> This patch fixes two mistakes in the interrupt logic. First we only trigger single-queue or multi-queue interrupts if the status register is set. This logic was already used for non multi-queue interrupts but it also applies to multi-queue interrupts. Secondly we need to lower the interrupts if the ISR isn't set. As part of this we can remove the other interrupt lowering logic and consolidate it inside gem_update_int_status(). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 438bcc014f8f8a2f8f68f322cb6a53f4c04688c2.1491947224.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/cadence_gem.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/cadence_gem.c +++ b/hw/net/cadence_gem.c @@ -XXX,XX +XXX,XX @@ static void gem_update_int_status(CadenceGEMState *s) { int i; - if ((s->num_priority_queues == 1) && s->regs[GEM_ISR]) { + if (!s->regs[GEM_ISR]) { + /* ISR isn't set, clear all the interrupts */ + for (i = 0; i < s->num_priority_queues; ++i) { + qemu_set_irq(s->irq[i], 0); + } + return; + } + + /* If we get here we know s->regs[GEM_ISR] is set, so we don't need to + * check it again. + */ + if (s->num_priority_queues == 1) { /* No priority queues, just trigger the interrupt */ DB_PRINT("asserting int.\n"); qemu_set_irq(s->irq[0], 1); @@ -XXX,XX +XXX,XX @@ static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size) { CadenceGEMState *s; uint32_t retval; - int i; s = (CadenceGEMState *)opaque; offset >>= 2; @@ -XXX,XX +XXX,XX @@ static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size) switch (offset) { case GEM_ISR: DB_PRINT("lowering irqs on ISR read\n"); - for (i = 0; i < s->num_priority_queues; ++i) { - qemu_set_irq(s->irq[i], 0); - } + /* The interrupts get updated at the end of the function. */ break; case GEM_PHYMNTNC: if (retval & GEM_PHYMNTNC_OP_R) { -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> Expose the Cadence GEM revision as a property. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 541324373cf87b50f8be0439a0cb89f5028b016f.1491947224.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/cadence_gem.h | 1 + hw/net/cadence_gem.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/include/hw/net/cadence_gem.h b/include/hw/net/cadence_gem.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/cadence_gem.h +++ b/include/hw/net/cadence_gem.h @@ -XXX,XX +XXX,XX @@ typedef struct CadenceGEMState { uint8_t num_priority_queues; uint8_t num_type1_screeners; uint8_t num_type2_screeners; + uint32_t revision; /* GEM registers backing store */ uint32_t regs[CADENCE_GEM_MAXREG]; diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/cadence_gem.c +++ b/hw/net/cadence_gem.c @@ -XXX,XX +XXX,XX @@ #define DESC_1_RX_SOF 0x00004000 #define DESC_1_RX_EOF 0x00008000 +#define GEM_MODID_VALUE 0x00020118 + static inline unsigned tx_desc_get_buffer(unsigned *desc) { return desc[0]; @@ -XXX,XX +XXX,XX @@ static void gem_reset(DeviceState *d) s->regs[GEM_TXPAUSE] = 0x0000ffff; s->regs[GEM_TXPARTIALSF] = 0x000003ff; s->regs[GEM_RXPARTIALSF] = 0x000003ff; - s->regs[GEM_MODID] = 0x00020118; + s->regs[GEM_MODID] = s->revision; s->regs[GEM_DESCONF] = 0x02500111; s->regs[GEM_DESCONF2] = 0x2ab13fff; s->regs[GEM_DESCONF5] = 0x002f2145; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_cadence_gem = { static Property gem_properties[] = { DEFINE_NIC_PROPERTIES(CadenceGEMState, conf), + DEFINE_PROP_UINT32("revision", CadenceGEMState, revision, + GEM_MODID_VALUE), DEFINE_PROP_UINT8("num-priority-queues", CadenceGEMState, num_priority_queues, 1), DEFINE_PROP_UINT8("num-type1-screeners", CadenceGEMState, -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 026dbe01a1d42619eee30ce3f2079741bf04bc73.1491947224.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zynqmp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #define ARM_PHYS_TIMER_PPI 30 #define ARM_VIRT_TIMER_PPI 27 +#define GEM_REVISION 0x40070106 + #define GIC_BASE_ADDR 0xf9000000 #define GIC_DIST_ADDR 0xf9010000 #define GIC_CPU_ADDR 0xf9020000 @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) qemu_check_nic_model(nd, TYPE_CADENCE_GEM); qdev_set_nic_properties(DEVICE(&s->gem[i]), nd); } + object_property_set_int(OBJECT(&s->gem[i]), GEM_REVISION, "revision", + &error_abort); object_property_set_int(OBJECT(&s->gem[i]), 2, "num-priority-queues", - &error_abort); + &error_abort); object_property_set_bool(OBJECT(&s->gem[i]), true, "realized", &err); if (err) { error_propagate(errp, err); -- 2.7.4 For M-profile CPUs, the BXJ instruction does not exist at all, and the encoding should always UNDEF. We were accidentally implementing it to behave like A-profile BXJ; correct the error. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1491844419-12485-2-git-send-email-peter.maydell@linaro.org --- target/arm/translate.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_thumb2_insn(CPUARMState *env, DisasContext *s, uint16_t insn_hw } break; case 4: /* bxj */ - /* Trivial implementation equivalent to bx. */ + /* Trivial implementation equivalent to bx. + * This instruction doesn't exist at all for M-profile. + */ + if (arm_dc_feature(s, ARM_FEATURE_M)) { + goto illegal_op; + } tmp = load_reg(s, rn); gen_bx(s, tmp); break; -- 2.7.4 In Thumb mode, the only instructions which can cause an interworking branch by writing the PC are BLX, BX, BXJ, LDR, POP and LDM. Unlike ARM mode, data processing instructions which target the PC do not cause interworking branches. When we added support for doing interworking branches on writes to PC from data processing instructions in commit 21aeb3430ce7ba, we accidentally changed a Thumb instruction to have interworking branch behaviour for writes to PC. (MOV, MOVS register-shifted register, encoding T2; this is the standard encoding for LSL/LSR/ASR/ROR (register).) For this encoding, behaviour with Rd == R15 is specified as UNPREDICTABLE, so allowing an interworking branch is within spec, but it's confusing and differs from our handling of this class of UNPREDICTABLE for other Thumb ALU operations. Make it perform a simple (non-interworking) branch like the others. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1491844419-12485-3-git-send-email-peter.maydell@linaro.org --- target/arm/translate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_thumb2_insn(CPUARMState *env, DisasContext *s, uint16_t insn_hw gen_arm_shift_reg(tmp, op, tmp2, logic_cc); if (logic_cc) gen_logic_CC(tmp); - store_reg_bx(s, rd, tmp); + store_reg(s, rd, tmp); break; case 1: /* Sign/zero extend. */ op = (insn >> 20) & 7; -- 2.7.4 We currently have two places that do: if (dc->ss_active) { gen_step_complete_exception(dc); } else { gen_exception_internal(EXCP_DEBUG); } Factor this out into its own function, as we're about to add a third place that needs the same logic. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1491844419-12485-4-git-send-email-peter.maydell@linaro.org --- target/arm/translate.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_step_complete_exception(DisasContext *s) s->is_jmp = DISAS_EXC; } +static void gen_singlestep_exception(DisasContext *s) +{ + /* Generate the right kind of exception for singlestep, which is + * either the architectural singlestep or EXCP_DEBUG for QEMU's + * gdb singlestepping. + */ + if (s->ss_active) { + gen_step_complete_exception(s); + } else { + gen_exception_internal(EXCP_DEBUG); + } +} + static void gen_smul_dual(TCGv_i32 a, TCGv_i32 b) { TCGv_i32 tmp1 = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) gen_set_pc_im(dc, dc->pc); /* fall through */ default: - if (dc->ss_active) { - gen_step_complete_exception(dc); - } else { - /* FIXME: Single stepping a WFI insn will not halt - the CPU. */ - gen_exception_internal(EXCP_DEBUG); - } + /* FIXME: Single stepping a WFI insn will not halt the CPU. */ + gen_singlestep_exception(dc); } if (dc->condjmp) { /* "Condition failed" instruction codepath. */ gen_set_label(dc->condlabel); gen_set_condexec(dc); gen_set_pc_im(dc, dc->pc); - if (dc->ss_active) { - gen_step_complete_exception(dc); - } else { - gen_exception_internal(EXCP_DEBUG); - } + gen_singlestep_exception(dc); } } else { /* While branches must always occur at the end of an IT block, -- 2.7.4 Move the utility routines gen_set_condexec() and gen_set_pc_im() up in the file, as we will want to use them from a function placed earlier in the file than their current location. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1491844419-12485-5-git-send-email-peter.maydell@linaro.org --- target/arm/translate.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static const uint8_t table_logic_cc[16] = { 1, /* mvn */ }; +static inline void gen_set_condexec(DisasContext *s) +{ + if (s->condexec_mask) { + uint32_t val = (s->condexec_cond << 4) | (s->condexec_mask >> 1); + TCGv_i32 tmp = tcg_temp_new_i32(); + tcg_gen_movi_i32(tmp, val); + store_cpu_field(tmp, condexec_bits); + } +} + +static inline void gen_set_pc_im(DisasContext *s, target_ulong val) +{ + tcg_gen_movi_i32(cpu_R[15], val); +} + /* Set PC and Thumb state from an immediate address. */ static inline void gen_bx_im(DisasContext *s, uint32_t addr) { @@ -XXX,XX +XXX,XX @@ DO_GEN_ST(8, MO_UB) DO_GEN_ST(16, MO_UW) DO_GEN_ST(32, MO_UL) -static inline void gen_set_pc_im(DisasContext *s, target_ulong val) -{ - tcg_gen_movi_i32(cpu_R[15], val); -} - static inline void gen_hvc(DisasContext *s, int imm16) { /* The pre HVC helper handles cases when HVC gets trapped @@ -XXX,XX +XXX,XX @@ static inline void gen_smc(DisasContext *s) s->is_jmp = DISAS_SMC; } -static inline void -gen_set_condexec (DisasContext *s) -{ - if (s->condexec_mask) { - uint32_t val = (s->condexec_cond << 4) | (s->condexec_mask >> 1); - TCGv_i32 tmp = tcg_temp_new_i32(); - tcg_gen_movi_i32(tmp, val); - store_cpu_field(tmp, condexec_bits); - } -} - static void gen_exception_internal_insn(DisasContext *s, int offset, int excp) { gen_set_condexec(s); -- 2.7.4 Move the code to generate the "condition failed" instruction codepath out of the if (singlestepping) {} else {}. This will allow adding support for handling a new is_jmp type which can't be neatly split into "singlestepping case" versus "not singlestepping case". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1491844419-12485-6-git-send-email-peter.maydell@linaro.org --- target/arm/translate.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) /* At this stage dc->condjmp will only be set when the skipped instruction was a conditional branch or trap, and the PC has already been written. */ + gen_set_condexec(dc); if (unlikely(cs->singlestep_enabled || dc->ss_active)) { /* Unconditional and "condition passed" instruction codepath. */ - gen_set_condexec(dc); switch (dc->is_jmp) { case DISAS_SWI: gen_ss_advance(dc); @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) /* FIXME: Single stepping a WFI insn will not halt the CPU. */ gen_singlestep_exception(dc); } - if (dc->condjmp) { - /* "Condition failed" instruction codepath. */ - gen_set_label(dc->condlabel); - gen_set_condexec(dc); - gen_set_pc_im(dc, dc->pc); - gen_singlestep_exception(dc); - } } else { /* While branches must always occur at the end of an IT block, there are a few other things that can cause us to terminate @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) - Hardware watchpoints. Hardware breakpoints have already been handled and skip this code. */ - gen_set_condexec(dc); switch(dc->is_jmp) { case DISAS_NEXT: gen_goto_tb(dc, 1, dc->pc); @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) gen_exception(EXCP_SMC, syn_aa32_smc(), 3); break; } - if (dc->condjmp) { - gen_set_label(dc->condlabel); - gen_set_condexec(dc); + } + + if (dc->condjmp) { + /* "Condition failed" instruction codepath for the branch/trap insn */ + gen_set_label(dc->condlabel); + gen_set_condexec(dc); + if (unlikely(cs->singlestep_enabled || dc->ss_active)) { + gen_set_pc_im(dc, dc->pc); + gen_singlestep_exception(dc); + } else { gen_goto_tb(dc, 1, dc->pc); - dc->condjmp = 0; } } -- 2.7.4 We now test for "are we singlestepping" in several places and it's not a trivial check because we need to care about both architectural singlestep and QEMU gdbstub singlestep. We're also about to add another place that needs to make this check, so pull the condition out into a function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1491844419-12485-7-git-send-email-peter.maydell@linaro.org --- target/arm/translate.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_singlestep_exception(DisasContext *s) } } +static inline bool is_singlestepping(DisasContext *s) +{ + /* Return true if we are singlestepping either because of + * architectural singlestep or QEMU gdbstub singlestep. This does + * not include the command line '-singlestep' mode which is rather + * misnamed as it only means "one instruction per TB" and doesn't + * affect the code we generate. + */ + return s->singlestep_enabled || s->ss_active; +} + static void gen_smul_dual(TCGv_i32 a, TCGv_i32 b) { TCGv_i32 tmp1 = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static inline void gen_goto_tb(DisasContext *s, int n, target_ulong dest) static inline void gen_jmp (DisasContext *s, uint32_t dest) { - if (unlikely(s->singlestep_enabled || s->ss_active)) { + if (unlikely(is_singlestepping(s))) { /* An indirect jump so that we still trigger the debug exception. */ if (s->thumb) dest |= 1; @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) ((dc->pc >= next_page_start - 3) && insn_crosses_page(env, dc)); } while (!dc->is_jmp && !tcg_op_buf_full() && - !cs->singlestep_enabled && + !is_singlestepping(dc) && !singlestep && - !dc->ss_active && !end_of_page && num_insns < max_insns); @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) instruction was a conditional branch or trap, and the PC has already been written. */ gen_set_condexec(dc); - if (unlikely(cs->singlestep_enabled || dc->ss_active)) { + if (unlikely(is_singlestepping(dc))) { /* Unconditional and "condition passed" instruction codepath. */ switch (dc->is_jmp) { case DISAS_SWI: @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) /* "Condition failed" instruction codepath for the branch/trap insn */ gen_set_label(dc->condlabel); gen_set_condexec(dc); - if (unlikely(cs->singlestep_enabled || dc->ss_active)) { + if (unlikely(is_singlestepping(dc))) { gen_set_pc_im(dc, dc->pc); gen_singlestep_exception(dc); } else { -- 2.7.4 For M profile exception-return handling we'd like to generate different code for some instructions depending on whether we are in Handler mode or Thread mode. This isn't the same as "are we privileged or user", so we need an extra bit in the TB flags to distinguish. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1491844419-12485-8-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 9 +++++++++ target/arm/translate.h | 1 + target/arm/translate.c | 1 + 3 files changed, 11 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) #define ARM_TBFLAG_NS_MASK (1 << ARM_TBFLAG_NS_SHIFT) #define ARM_TBFLAG_BE_DATA_SHIFT 20 #define ARM_TBFLAG_BE_DATA_MASK (1 << ARM_TBFLAG_BE_DATA_SHIFT) +/* For M profile only, Handler (ie not Thread) mode */ +#define ARM_TBFLAG_HANDLER_SHIFT 21 +#define ARM_TBFLAG_HANDLER_MASK (1 << ARM_TBFLAG_HANDLER_SHIFT) /* Bit usage when in AArch64 state */ #define ARM_TBFLAG_TBI0_SHIFT 0 /* TBI0 for EL0/1 or TBI for EL2/3 */ @@ -XXX,XX +XXX,XX @@ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) (((F) & ARM_TBFLAG_NS_MASK) >> ARM_TBFLAG_NS_SHIFT) #define ARM_TBFLAG_BE_DATA(F) \ (((F) & ARM_TBFLAG_BE_DATA_MASK) >> ARM_TBFLAG_BE_DATA_SHIFT) +#define ARM_TBFLAG_HANDLER(F) \ + (((F) & ARM_TBFLAG_HANDLER_MASK) >> ARM_TBFLAG_HANDLER_SHIFT) #define ARM_TBFLAG_TBI0(F) \ (((F) & ARM_TBFLAG_TBI0_MASK) >> ARM_TBFLAG_TBI0_SHIFT) #define ARM_TBFLAG_TBI1(F) \ @@ -XXX,XX +XXX,XX @@ static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } *flags |= fp_exception_el(env) << ARM_TBFLAG_FPEXC_EL_SHIFT; + if (env->v7m.exception != 0) { + *flags |= ARM_TBFLAG_HANDLER_MASK; + } + *cs_base = 0; } diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool vfp_enabled; /* FP enabled via FPSCR.EN */ int vec_len; int vec_stride; + bool v7m_handler_mode; /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) dc->vec_len = ARM_TBFLAG_VECLEN(tb->flags); dc->vec_stride = ARM_TBFLAG_VECSTRIDE(tb->flags); dc->c15_cpar = ARM_TBFLAG_XSCALE_CPAR(tb->flags); + dc->v7m_handler_mode = ARM_TBFLAG_HANDLER(tb->flags); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.7.4 On M profile, return from exceptions happen when code in Handler mode executes one of the following function call return instructions: * POP or LDM which loads the PC * LDR to PC * BX register and the new PC value is 0xFFxxxxxx. QEMU tries to implement this by not treating the instruction specially but then catching the attempt to execute from the magic address value. This is not ideal, because: * there are guest visible differences from the architecturally specified behaviour (for instance jumping to 0xFFxxxxxx via a different instruction should not cause an exception return but it will in the QEMU implementation) * we have to account for it in various places (like refusing to take an interrupt if the PC is at a magic value, and making sure that the MPU doesn't deny execution at the magic value addresses) Drop these hacks, and instead implement exception return the way the architecture specifies -- by having the relevant instructions check for the magic value and raise the 'do an exception return' QEMU internal exception immediately. The effect on the generated code is minor: bx lr, old code (and new code for Thread mode): TCG: mov_i32 tmp5,r14 movi_i32 tmp6,$0xfffffffffffffffe and_i32 pc,tmp5,tmp6 movi_i32 tmp6,$0x1 and_i32 tmp5,tmp5,tmp6 st_i32 tmp5,env,$0x218 exit_tb $0x0 set_label $L0 exit_tb $0x7f2aabd61993 x86_64 generated code: 0x7f2aabe87019: mov %ebx,%ebp 0x7f2aabe8701b: and $0xfffffffffffffffe,%ebp 0x7f2aabe8701e: mov %ebp,0x3c(%r14) 0x7f2aabe87022: and $0x1,%ebx 0x7f2aabe87025: mov %ebx,0x218(%r14) 0x7f2aabe8702c: xor %eax,%eax 0x7f2aabe8702e: jmpq 0x7f2aabe7c016 bx lr, new code when in Handler mode: TCG: mov_i32 tmp5,r14 movi_i32 tmp6,$0xfffffffffffffffe and_i32 pc,tmp5,tmp6 movi_i32 tmp6,$0x1 and_i32 tmp5,tmp5,tmp6 st_i32 tmp5,env,$0x218 movi_i32 tmp5,$0xffffffffff000000 brcond_i32 pc,tmp5,geu,$L1 exit_tb $0x0 set_label $L1 movi_i32 tmp5,$0x8 call exception_internal,$0x0,$0,env,tmp5 x86_64 generated code: 0x7fe8fa1264e3: mov %ebp,%ebx 0x7fe8fa1264e5: and $0xfffffffffffffffe,%ebx 0x7fe8fa1264e8: mov %ebx,0x3c(%r14) 0x7fe8fa1264ec: and $0x1,%ebp 0x7fe8fa1264ef: mov %ebp,0x218(%r14) 0x7fe8fa1264f6: cmp $0xff000000,%ebx 0x7fe8fa1264fc: jae 0x7fe8fa126509 0x7fe8fa126502: xor %eax,%eax 0x7fe8fa126504: jmpq 0x7fe8fa122016 0x7fe8fa126509: mov %r14,%rdi 0x7fe8fa12650c: mov $0x8,%esi 0x7fe8fa126511: mov $0x56095dbeccf5,%r10 0x7fe8fa12651b: callq *%r10 which is a difference of one cmp/branch-not-taken. This will be lost in the noise of having to exit generated code and look up the next TB anyway. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1491844419-12485-9-git-send-email-peter.maydell@linaro.org --- target/arm/translate.h | 4 +++ target/arm/translate.c | 66 +++++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 64 insertions(+), 6 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static void disas_set_insn_syndrome(DisasContext *s, uint32_t syn) #define DISAS_HVC 8 #define DISAS_SMC 9 #define DISAS_YIELD 10 +/* M profile branch which might be an exception return (and so needs + * custom end-of-TB code) + */ +#define DISAS_BX_EXCRET 11 #ifdef TARGET_AARCH64 void a64_translate_init(void); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_bx(DisasContext *s, TCGv_i32 var) store_cpu_field(var, thumb); } +/* Set PC and Thumb state from var. var is marked as dead. + * For M-profile CPUs, include logic to detect exception-return + * branches and handle them. This is needed for Thumb POP/LDM to PC, LDR to PC, + * and BX reg, and no others, and happens only for code in Handler mode. + */ +static inline void gen_bx_excret(DisasContext *s, TCGv_i32 var) +{ + /* Generate the same code here as for a simple bx, but flag via + * s->is_jmp that we need to do the rest of the work later. + */ + gen_bx(s, var); + if (s->v7m_handler_mode && arm_dc_feature(s, ARM_FEATURE_M)) { + s->is_jmp = DISAS_BX_EXCRET; + } +} + +static inline void gen_bx_excret_final_code(DisasContext *s) +{ + /* Generate the code to finish possible exception return and end the TB */ + TCGLabel *excret_label = gen_new_label(); + + /* Is the new PC value in the magic range indicating exception return? */ + tcg_gen_brcondi_i32(TCG_COND_GEU, cpu_R[15], 0xff000000, excret_label); + /* No: end the TB as we would for a DISAS_JMP */ + if (is_singlestepping(s)) { + gen_singlestep_exception(s); + } else { + tcg_gen_exit_tb(0); + } + gen_set_label(excret_label); + /* Yes: this is an exception return. + * At this point in runtime env->regs[15] and env->thumb will hold + * the exception-return magic number, which do_v7m_exception_exit() + * will read. Nothing else will be able to see those values because + * the cpu-exec main loop guarantees that we will always go straight + * from raising the exception to the exception-handling code. + * + * gen_ss_advance(s) does nothing on M profile currently but + * calling it is conceptually the right thing as we have executed + * this instruction (compare SWI, HVC, SMC handling). + */ + gen_ss_advance(s); + gen_exception_internal(EXCP_EXCEPTION_EXIT); +} + /* Variant of store_reg which uses branch&exchange logic when storing to r15 in ARM architecture v7 and above. The source must be a temporary and will be marked as dead. */ @@ -XXX,XX +XXX,XX @@ static inline void store_reg_bx(DisasContext *s, int reg, TCGv_i32 var) static inline void store_reg_from_load(DisasContext *s, int reg, TCGv_i32 var) { if (reg == 15 && ENABLE_ARCH_5) { - gen_bx(s, var); + gen_bx_excret(s, var); } else { store_reg(s, reg, var); } @@ -XXX,XX +XXX,XX @@ static int disas_thumb2_insn(CPUARMState *env, DisasContext *s, uint16_t insn_hw tmp = tcg_temp_new_i32(); gen_aa32_ld32u(s, tmp, addr, get_mem_index(s)); if (i == 15) { - gen_bx(s, tmp); + gen_bx_excret(s, tmp); } else if (i == rn) { loaded_var = tmp; loaded_base = 1; @@ -XXX,XX +XXX,XX @@ static int disas_thumb2_insn(CPUARMState *env, DisasContext *s, uint16_t insn_hw goto illegal_op; } if (rs == 15) { - gen_bx(s, tmp); + gen_bx_excret(s, tmp); } else { store_reg(s, rs, tmp); } @@ -XXX,XX +XXX,XX @@ static void disas_thumb_insn(CPUARMState *env, DisasContext *s) tmp2 = tcg_temp_new_i32(); tcg_gen_movi_i32(tmp2, val); store_reg(s, 14, tmp2); + gen_bx(s, tmp); + } else { + /* Only BX works as exception-return, not BLX */ + gen_bx_excret(s, tmp); } - /* already thumb, no need to check */ - gen_bx(s, tmp); break; } break; @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) instruction was a conditional branch or trap, and the PC has already been written. */ gen_set_condexec(dc); - if (unlikely(is_singlestepping(dc))) { + if (dc->is_jmp == DISAS_BX_EXCRET) { + /* Exception return branches need some special case code at the + * end of the TB, which is complex enough that it has to + * handle the single-step vs not and the condition-failed + * insn codepath itself. + */ + gen_bx_excret_final_code(dc); + } else if (unlikely(is_singlestepping(dc))) { /* Unconditional and "condition passed" instruction codepath. */ switch (dc->is_jmp) { case DISAS_SWI: -- 2.7.4 Now that we've rewritten M-profile exception return so that the magic PC values are not visible to other parts of QEMU, we can delete the special casing of them elsewhere. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1491844419-12485-10-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.c | 43 ++----------------------------------------- target/arm/translate.c | 8 -------- 2 files changed, 2 insertions(+), 49 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) } #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) -static void arm_v7m_unassigned_access(CPUState *cpu, hwaddr addr, - bool is_write, bool is_exec, int opaque, - unsigned size) -{ - ARMCPU *arm = ARM_CPU(cpu); - CPUARMState *env = &arm->env; - - /* ARMv7-M interrupt return works by loading a magic value into the PC. - * On real hardware the load causes the return to occur. The qemu - * implementation performs the jump normally, then does the exception - * return by throwing a special exception when when the CPU tries to - * execute code at the magic address. - */ - if (env->v7m.exception != 0 && addr >= 0xfffffff0 && is_exec) { - cpu->exception_index = EXCP_EXCEPTION_EXIT; - cpu_loop_exit(cpu); - } - - /* In real hardware an attempt to access parts of the address space - * with nothing there will usually cause an external abort. - * However our QEMU board models are often missing device models where - * the guest can boot anyway with the default read-as-zero/writes-ignored - * behaviour that you get without a QEMU unassigned_access hook. - * So just return here to retain that default behaviour. - */ -} - static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request) { CPUClass *cc = CPU_GET_CLASS(cs); @@ -XXX,XX +XXX,XX @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request) CPUARMState *env = &cpu->env; bool ret = false; - /* ARMv7-M interrupt return works by loading a magic value - * into the PC. On real hardware the load causes the - * return to occur. The qemu implementation performs the - * jump normally, then does the exception return when the - * CPU tries to execute code at the magic address. - * This will cause the magic PC value to be pushed to - * the stack if an interrupt occurred at the wrong time. - * We avoid this by disabling interrupts when - * pc contains a magic address. - * - * ARMv7-M interrupt masking works differently than -A or -R. + /* ARMv7-M interrupt masking works differently than -A or -R. * There is no FIQ/IRQ distinction. Instead of I and F bits * masking FIQ and IRQ interrupts, an exception is taken only * if it is higher priority than the current execution priority @@ -XXX,XX +XXX,XX @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request) * currently active exception). */ if (interrupt_request & CPU_INTERRUPT_HARD - && (armv7m_nvic_can_take_pending_exception(env->nvic)) - && (env->regs[15] < 0xfffffff0)) { + && (armv7m_nvic_can_take_pending_exception(env->nvic))) { cs->exception_index = EXCP_IRQ; cc->do_interrupt(cs); ret = true; @@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data) cc->do_interrupt = arm_v7m_cpu_do_interrupt; #endif - cc->do_unassigned_access = arm_v7m_unassigned_access; cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb) dc->is_jmp = DISAS_EXC; break; } -#else - if (arm_dc_feature(dc, ARM_FEATURE_M)) { - /* Branches to the magic exception-return addresses should - * already have been caught via the arm_v7m_unassigned_access hook, - * and never get here. - */ - assert(dc->pc < 0xfffffff0); - } #endif if (unlikely(!QTAILQ_EMPTY(&cs->breakpoints))) { -- 2.7.4 Nothing too exciting, but does include the last bits of v8.1M support work. -- PMM The following changes since commit e79de63ab1bd1f6550e7b915e433bec1ad1a870a: Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210107' into staging (2021-01-07 20:34:05 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210108 for you to fetch changes up to c9f8511ea8d2b80723af0fea1f716d752c1b5208: docs/system: arm: Add sabrelite board description (2021-01-08 15:13:39 +0000) ---------------------------------------------------------------- target-arm queue: * intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs * target/arm: Fix MTE0_ACTIVE * target/arm: Implement v8.1M and Cortex-M55 model * hw/arm/highbank: Drop dead KVM support code * util/qemu-timer: Make timer_free() imply timer_del() * various devices: Use ptimer_free() in finalize function * docs/system: arm: Add sabrelite board description * sabrelite: Minor fixes to allow booting U-Boot ---------------------------------------------------------------- Andrew Jones (1): hw/arm/virt: Remove virt machine state 'smp_cpus' Bin Meng (4): hw/misc: imx6_ccm: Update PMU_MISC0 reset value hw/msic: imx6_ccm: Correct register value for silicon type hw/arm: sabrelite: Connect the Ethernet PHY at address 6 docs/system: arm: Add sabrelite board description Edgar E. Iglesias (1): intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs Gan Qixin (7): digic-timer: Use ptimer_free() in the finalize function to avoid memleaks allwinner-a10-pit: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_rtc: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_pwm: Use ptimer_free() in the finalize function to avoid memleaks mss-timer: Use ptimer_free() in the finalize function to avoid memleaks musicpal: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_mct: Use ptimer_free() in the finalize function to avoid memleaks Peter Maydell (9): hw/intc/armv7m_nvic: Correct handling of CCR.BFHFNMIGN target/arm: Correct store of FPSCR value via FPCXT_S target/arm: Implement FPCXT_NS fp system register target/arm: Implement Cortex-M55 model hw/arm/highbank: Drop dead KVM support code util/qemu-timer: Make timer_free() imply timer_del() scripts/coccinelle: New script to remove unnecessary timer_del() calls Remove superfluous timer_del() calls target/arm: Remove timer_del()/timer_deinit() before timer_free() Richard Henderson (1): target/arm: Fix MTE0_ACTIVE docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++ include/hw/arm/virt.h | 3 +- include/qemu/timer.h | 24 +++--- block/iscsi.c | 2 - block/nbd.c | 1 - block/qcow2.c | 1 - hw/arm/highbank.c | 14 +-- hw/arm/musicpal.c | 12 +++ hw/arm/sabrelite.c | 4 + hw/arm/virt-acpi-build.c | 9 +- hw/arm/virt.c | 21 +++-- hw/block/nvme.c | 2 - hw/char/serial.c | 2 - hw/char/virtio-serial-bus.c | 2 - hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/arm_gic.c | 4 +- hw/intc/armv7m_nvic.c | 15 ++++ hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/misc/imx6_ccm.c | 4 +- hw/net/e1000.c | 3 - hw/net/e1000e_core.c | 8 -- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 - hw/rtc/exynos4210_rtc.c | 9 ++ hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 - hw/timer/allwinner-a10-pit.c | 11 +++ hw/timer/digic-timer.c | 8 ++ hw/timer/exynos4210_mct.c | 14 +++ hw/timer/exynos4210_pwm.c | 11 +++ hw/timer/mss-timer.c | 13 +++ hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/arm/cpu.c | 2 - target/arm/cpu_tcg.c | 42 +++++++++ target/arm/helper.c | 2 +- target/s390x/cpu.c | 2 - ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - target/arm/translate-vfp.c.inc | 114 ++++++++++++++++++++++-- 65 files changed, 421 insertions(+), 111 deletions(-) create mode 100644 docs/system/arm/sabrelite.rst create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Correct the indexing into s->cpu_ctlr for vCPUs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20201214222154.3480243-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline void gic_get_best_virq(GICState *s, int cpu, static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, int group_mask) { + int cpu_iface = virt ? (cpu + GIC_NCPU) : cpu; + if (!virt && !(s->ctlr & group_mask)) { return false; } @@ -XXX,XX +XXX,XX @@ static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, return false; } - if (!(s->cpu_ctlr[cpu] & group_mask)) { + if (!(s->cpu_ctlr[cpu_iface] & group_mask)) { return false; } -- 2.20.1 From: Andrew Jones <drjones@redhat.com> virt machine's 'smp_cpus' and machine->smp.cpus must always have the same value. And, anywhere we have virt machine state we have machine state. So let's remove the redundancy. Also, to make it easier to see that machine->smp is the true source for "smp_cpus" and "max_cpus", avoid passing them in function parameters, preferring instead to get them from the state. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Ying Fang <fangying1@huawei.com> Message-id: 20201215174815.51520-1-drjones@redhat.com [PMM: minor formatting tweak to smp_cpus variable declaration] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 3 +-- hw/arm/virt-acpi-build.c | 9 +++++---- hw/arm/virt.c | 21 ++++++++++----------- 3 files changed, 16 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { MemMapEntry *memmap; char *pciehb_nodename; const int *irqmap; - int smp_cpus; void *fdt; int fdt_size; uint32_t clock_phandle; @@ -XXX,XX +XXX,XX @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) assert(vms->gic_version == VIRT_GIC_VERSION_3); - return vms->smp_cpus > redist0_capacity ? 2 : 1; + return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1; } #endif /* QEMU_ARM_VIRT_H */ diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #define ACPI_BUILD_TABLE_SIZE 0x20000 -static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus) +static void acpi_dsdt_add_cpus(Aml *scope, VirtMachineState *vms) { + MachineState *ms = MACHINE(vms); uint16_t i; - for (i = 0; i < smp_cpus; i++) { + for (i = 0; i < ms->smp.cpus; i++) { Aml *dev = aml_device("C%.03X", i); aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0007"))); aml_append(dev, aml_name_decl("_UID", aml_int(i))); @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) gicd->base_address = cpu_to_le64(memmap[VIRT_GIC_DIST].base); gicd->version = vms->gic_version; - for (i = 0; i < vms->smp_cpus; i++) { + for (i = 0; i < MACHINE(vms)->smp.cpus; i++) { AcpiMadtGenericCpuInterface *gicc = acpi_data_push(table_data, sizeof(*gicc)); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); @@ -XXX,XX +XXX,XX @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) * the RTC ACPI device at all when using UEFI. */ scope = aml_scope("\\_SB"); - acpi_dsdt_add_cpus(scope, vms->smp_cpus); + acpi_dsdt_add_cpus(scope, vms); acpi_dsdt_add_uart(scope, &memmap[VIRT_UART], (irqmap[VIRT_UART] + ARM_SPI_BASE)); if (vmc->acpi_expose_flash) { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/timer"); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) int cpu; int addr_cells = 1; const MachineState *ms = MACHINE(vms); + int smp_cpus = ms->smp.cpus; /* * From Documentation/devicetree/bindings/arm/cpus.txt @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) * The simplest way to go is to examine affinity IDs of all our CPUs. If * at least one of them has Aff3 populated, we set #address-cells to 2. */ - for (cpu = 0; cpu < vms->smp_cpus; cpu++) { + for (cpu = 0; cpu < smp_cpus; cpu++) { ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); if (armcpu->mp_affinity & ARM_AFF3_MASK) { @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#address-cells", addr_cells); qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#size-cells", 0x0); - for (cpu = vms->smp_cpus - 1; cpu >= 0; cpu--) { + for (cpu = smp_cpus - 1; cpu >= 0; cpu--) { char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); CPUState *cs = CPU(armcpu); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", armcpu->dtb_compatible); - if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED - && vms->smp_cpus > 1) { + if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED && smp_cpus > 1) { qemu_fdt_setprop_string(vms->fdt, nodename, "enable-method", "psci"); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/pmu"); @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) * virt_cpu_post_init() must be called after the CPUs have * been realized and the GIC has been created. */ -static void virt_cpu_post_init(VirtMachineState *vms, int max_cpus, - MemoryRegion *sysmem) +static void virt_cpu_post_init(VirtMachineState *vms, MemoryRegion *sysmem) { + int max_cpus = MACHINE(vms)->smp.max_cpus; bool aarch64, pmu, steal_time; CPUState *cpu; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) exit(1); } - vms->smp_cpus = smp_cpus; - if (vms->virt && kvm_enabled()) { error_report("mach-virt: KVM does not support providing " "Virtualization extensions to the guest CPU"); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_fdt(vms); possible_cpus = mc->possible_cpu_arch_ids(machine); + assert(possible_cpus->len == max_cpus); for (n = 0; n < possible_cpus->len; n++) { Object *cpuobj; CPUState *cs; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gic(vms); - virt_cpu_post_init(vms, possible_cpus->len, sysmem); + virt_cpu_post_init(vms, sysmem); fdt_add_pmu_nodes(vms); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In 50244cc76abc we updated mte_check_fail to match the ARM pseudocode, using the correct EL to select the TCF field. But we failed to update MTE0_ACTIVE the same way, which led to g_assert_not_reached(). Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/bugs/1907137 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201221204426.88514-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, if (FIELD_EX32(flags, TBFLAG_A64, UNPRIV) && tbid && !(env->pstate & PSTATE_TCO) - && (sctlr & SCTLR_TCF0) + && (sctlr & SCTLR_TCF) && allocation_tag_access_enabled(env, 0, sctlr)) { flags = FIELD_DP32(flags, TBFLAG_A64, MTE0_ACTIVE, 1); } -- 2.20.1 The CCR is a register most of whose bits are banked between security states but where BFHFNMIGN is not, and we keep it in the non-secure entry of the v7m.ccr[] array. The logic which tries to handle this bit fails to implement the "RAZ/WI from Nonsecure if AIRCR.BFHFNMINS is zero" requirement; correct the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-2-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) */ val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + /* BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0 */ + if (!attrs.secure) { + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + val &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } + } return val; case 0xd24: /* System Handler Control and State (SHCSR) */ if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, (cpu->env.v7m.ccr[M_REG_NS] & ~R_V7M_CCR_BFHFNMIGN_MASK) | (value & R_V7M_CCR_BFHFNMIGN_MASK); value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } else { + /* + * BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0, so + * preserve the state currently in the NS element of the array + */ + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + value |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + } } cpu->env.v7m.ccr[attrs.secure] = value; -- 2.20.1 In commit 64f863baeedc8659 we implemented the v8.1M FPCXT_S register, but we got the write behaviour wrong. On read, this register reads bits [27:0] of FPSCR plus the CONTROL.SFPA bit. On write, it doesn't just write back those bits -- it writes a value to the whole FPSCR, whose upper 4 bits are zeroes. We also incorrectly implemented the write-to-FPSCR as a simple store to vfp.xregs; this skips the "update the softfloat flags" part of the vfp_set_fpscr helper so the value would read back correctly but not actually take effect. Fix both of these things by doing a complete write to the FPSCR using the helper function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-3-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, } case ARM_VFP_FPCXT_S: { - TCGv_i32 sfpa, control, fpscr; - /* Set FPSCR[27:0] and CONTROL.SFPA from value */ + TCGv_i32 sfpa, control; + /* + * Set FPSCR and CONTROL.SFPA from value; the new FPSCR takes + * bits [27:0] from value and zeroes bits [31:28]. + */ tmp = loadfn(s, opaque); sfpa = tcg_temp_new_i32(); tcg_gen_shri_i32(sfpa, tmp, 31); @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_gen_deposit_i32(control, control, sfpa, R_V7M_CONTROL_SFPA_SHIFT, 1); store_cpu_field(control, v7m.control[M_REG_S]); - fpscr = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); - tcg_gen_andi_i32(fpscr, fpscr, FPCR_NZCV_MASK); tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); - tcg_gen_or_i32(fpscr, fpscr, tmp); - store_cpu_field(fpscr, vfp.xregs[ARM_VFP_FPSCR]); + gen_helper_vfp_set_fpscr(cpu_env, tmp); tcg_temp_free_i32(tmp); tcg_temp_free_i32(sfpa); break; -- 2.20.1 Implement the v8.1M FPCXT_NS floating-point system register. This is a little more complicated than FPCXT_S, because it has specific handling for "current FP state is inactive", and it only wants to do PreserveFPState(), not the full set of actions done by ExecuteFPCheck() which vfp_access_check() implements. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-4-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 102 ++++++++++++++++++++++++++++++++- 1 file changed, 99 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) } break; case ARM_VFP_FPCXT_S: + case ARM_VFP_FPCXT_NS: if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { return false; } @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) return FPSysRegCheckFailed; } - if (!vfp_access_check(s)) { + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * So we don't call vfp_access_check() and the callers must handle this. + */ + if (regno != ARM_VFP_FPCXT_NS && !vfp_access_check(s)) { return FPSysRegCheckDone; } - return FPSysRegCheckContinue; } +static void gen_branch_fpInactive(DisasContext *s, TCGCond cond, + TCGLabel *label) +{ + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * We don't have a TB flag that matches the fpInactive check, so we + * do it at runtime as we don't expect FPCXT_NS accesses to be frequent. + * + * Emit code that checks fpInactive and does a conditional + * branch to label based on it: + * if cond is TCG_COND_NE then branch if fpInactive != 0 (ie if inactive) + * if cond is TCG_COND_EQ then branch if fpInactive == 0 (ie if active) + */ + assert(cond == TCG_COND_EQ || cond == TCG_COND_NE); + + /* fpInactive = FPCCR_NS.ASPEN == 1 && CONTROL.FPCA == 0 */ + TCGv_i32 aspen, fpca; + aspen = load_cpu_field(v7m.fpccr[M_REG_NS]); + fpca = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_xori_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_andi_i32(fpca, fpca, R_V7M_CONTROL_FPCA_MASK); + tcg_gen_or_i32(fpca, fpca, aspen); + tcg_gen_brcondi_i32(tcg_invert_cond(cond), fpca, 0, label); + tcg_temp_free_i32(aspen); + tcg_temp_free_i32(fpca); +} + static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, fp_sysreg_loadfn *loadfn, @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, { /* Do a write to an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(tmp); break; } + case ARM_VFP_FPCXT_NS: + lab_end = gen_new_label(); + /* fpInactive case: write is a NOP, so branch to end */ + gen_branch_fpInactive(s, TCG_COND_NE, lab_end); + /* !fpInactive: PreserveFPState(), and reads same as FPCXT_S */ + gen_preserve_fp_state(s); + /* fall through */ case ARM_VFP_FPCXT_S: { TCGv_i32 sfpa, control; @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, default: g_assert_not_reached(); } + if (lab_end) { + gen_set_label(lab_end); + } return true; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, { /* Do a read from an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; + bool lookup_tb = false; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, fpscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); gen_helper_vfp_set_fpscr(cpu_env, fpscr); tcg_temp_free_i32(fpscr); - gen_lookup_tb(s); + lookup_tb = true; + break; + } + case ARM_VFP_FPCXT_NS: + { + TCGv_i32 control, sfpa, fpscr, fpdscr, zero; + TCGLabel *lab_active = gen_new_label(); + + lookup_tb = true; + + gen_branch_fpInactive(s, TCG_COND_EQ, lab_active); + /* fpInactive case: reads as FPDSCR_NS */ + TCGv_i32 tmp = load_cpu_field(v7m.fpdscr[M_REG_NS]); + storefn(s, opaque, tmp); + lab_end = gen_new_label(); + tcg_gen_br(lab_end); + + gen_set_label(lab_active); + /* !fpInactive: Reads the same as FPCXT_S, but side effects differ */ + gen_preserve_fp_state(s); + tmp = tcg_temp_new_i32(); + sfpa = tcg_temp_new_i32(); + fpscr = tcg_temp_new_i32(); + gen_helper_vfp_get_fpscr(fpscr, cpu_env); + tcg_gen_andi_i32(tmp, fpscr, ~FPCR_NZCV_MASK); + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(sfpa, control, R_V7M_CONTROL_SFPA_MASK); + tcg_gen_shli_i32(sfpa, sfpa, 31 - R_V7M_CONTROL_SFPA_SHIFT); + tcg_gen_or_i32(tmp, tmp, sfpa); + tcg_temp_free_i32(control); + /* Store result before updating FPSCR, in case it faults */ + storefn(s, opaque, tmp); + /* If SFPA is zero then set FPSCR from FPDSCR_NS */ + fpdscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); + zero = tcg_const_i32(0); + tcg_gen_movcond_i32(TCG_COND_EQ, fpscr, sfpa, zero, fpdscr, fpscr); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(zero); + tcg_temp_free_i32(sfpa); + tcg_temp_free_i32(fpdscr); + tcg_temp_free_i32(fpscr); break; } default: g_assert_not_reached(); } + + if (lab_end) { + gen_set_label(lab_end); + } + if (lookup_tb) { + gen_lookup_tb(s); + } return true; } -- 2.20.1 Now that we have implemented all the features needed by the v8.1M architecture, we can add the model of the Cortex-M55. This is the configuration without MVE support; we'll add MVE later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-5-peter.maydell@linaro.org --- target/arm/cpu_tcg.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) cpu->ctr = 0x8000c000; } +static void cortex_m55_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_V8_1M); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd221; /* r0p1 */ + cpu->revidr = 0; + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + /* + * These are the MVFR* values for the FPU, no MVE configuration; + * we will update them later when we implement MVE + */ + cpu->isar.mvfr0 = 0x10110221; + cpu->isar.mvfr1 = 0x12100011; + cpu->isar.mvfr2 = 0x00000040; + cpu->isar.id_pfr0 = 0x20000030; + cpu->isar.id_pfr1 = 0x00000230; + cpu->isar.id_dfr0 = 0x10200000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00111040; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x01000000; + cpu->isar.id_mmfr3 = 0x00000011; + cpu->isar.id_isar0 = 0x01103110; + cpu->isar.id_isar1 = 0x02212000; + cpu->isar.id_isar2 = 0x20232232; + cpu->isar.id_isar3 = 0x01111131; + cpu->isar.id_isar4 = 0x01310132; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; + cpu->clidr = 0x00000000; /* caches not implemented */ + cpu->ctr = 0x8303c003; +} + static const ARMCPRegInfo cortexr5_cp_reginfo[] = { /* Dummy the TCM region regs for the moment */ { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_tcg_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m33", .initfn = cortex_m33_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m55", .initfn = cortex_m55_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, { .name = "ti925t", .initfn = ti925t_initfn }, -- 2.20.1 Support for running KVM on 32-bit Arm hosts was removed in commit 82bf7ae84ce739e. You can still run a 32-bit guest on a 64-bit Arm host CPU, but because Arm KVM requires the host and guest CPU types to match, it is not possible to run a guest that requires a Cortex-A9 or Cortex-A15 CPU there. That means that the code in the highbank/midway board models to support KVM is no longer used, and we can delete it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201215144215.28482-1-peter.maydell@linaro.org --- hw/arm/highbank.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/boot.h" #include "hw/loader.h" #include "net/net.h" -#include "sysemu/kvm.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a15mpcore.h" #include "qemu/log.h" #include "qom/object.h" +#include "cpu.h" #define SMP_BOOT_ADDR 0x100 #define SMP_BOOT_REG 0x40 @@ -XXX,XX +XXX,XX @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) highbank_binfo.loader_start = 0; highbank_binfo.write_secondary_boot = hb_write_secondary; highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary; - if (!kvm_enabled()) { - highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; - highbank_binfo.write_board_setup = hb_write_board_setup; - highbank_binfo.secure_board_setup = true; - } else { - warn_report("cannot load built-in Monitor support " - "if KVM is enabled. Some guests (such as Linux) " - "may not boot."); - } + highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; + highbank_binfo.write_board_setup = hb_write_board_setup; + highbank_binfo.secure_board_setup = true; arm_load_kernel(ARM_CPU(first_cpu), machine, &highbank_binfo); } -- 2.20.1 Currently timer_free() is a simple wrapper for g_free(). This means that the timer being freed must not be currently active, as otherwise QEMU might crash later when the active list is processed and still has a pointer to freed memory on it. As a result almost all calls to timer_free() are preceded by a timer_del() call, as can be seen in the output of git grep -B1 '\<timer_free\>' This is unfortunate API design as it makes it easy to accidentally misuse (by forgetting the timer_del()), and the correct use is annoyingly verbose. Make timer_free() imply a timer_del(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-2-peter.maydell@linaro.org --- include/qemu/timer.h | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/include/qemu/timer.h b/include/qemu/timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/timer.h +++ b/include/qemu/timer.h @@ -XXX,XX +XXX,XX @@ static inline QEMUTimer *timer_new_ms(QEMUClockType type, QEMUTimerCB *cb, */ void timer_deinit(QEMUTimer *ts); -/** - * timer_free: - * @ts: the timer - * - * Free a timer (it must not be on the active list) - */ -static inline void timer_free(QEMUTimer *ts) -{ - g_free(ts); -} - /** * timer_del: * @ts: the timer @@ -XXX,XX +XXX,XX @@ static inline void timer_free(QEMUTimer *ts) */ void timer_del(QEMUTimer *ts); +/** + * timer_free: + * @ts: the timer + * + * Free a timer. This will call timer_del() for you to remove + * the timer from the active list if it was still active. + */ +static inline void timer_free(QEMUTimer *ts) +{ + timer_del(ts); + g_free(ts); +} + /** * timer_mod_ns: * @ts: the timer -- 2.20.1 Now that timer_free() implicitly calls timer_del(), sequences timer_del(mytimer); timer_free(mytimer); can be simplified to just timer_free(mytimer); Add a Coccinelle script to do this transformation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-3-peter.maydell@linaro.org --- scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci diff --git a/scripts/coccinelle/timer-del-timer-free.cocci b/scripts/coccinelle/timer-del-timer-free.cocci new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/coccinelle/timer-del-timer-free.cocci @@ -XXX,XX +XXX,XX @@ +// Remove superfluous timer_del() calls +// +// Copyright Linaro Limited 2020 +// This work is licensed under the terms of the GNU GPLv2 or later. +// +// spatch --macro-file scripts/cocci-macro-file.h \ +// --sp-file scripts/coccinelle/timer-del-timer-free.cocci \ +// --in-place --dir . +// +// The timer_free() function now implicitly calls timer_del() +// for you, so calls to timer_del() immediately before the +// timer_free() of the same timer can be deleted. + +@@ +expression T; +@@ +-timer_del(T); + timer_free(T); -- 2.20.1 This commit is the result of running the timer-del-timer-free.cocci script on the whole source tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-4-peter.maydell@linaro.org --- block/iscsi.c | 2 -- block/nbd.c | 1 - block/qcow2.c | 1 - hw/block/nvme.c | 2 -- hw/char/serial.c | 2 -- hw/char/virtio-serial-bus.c | 2 -- hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/net/e1000.c | 3 --- hw/net/e1000e_core.c | 8 -------- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 -- hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 -- hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/s390x/cpu.c | 2 -- ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - 42 files changed, 58 deletions(-) diff --git a/block/iscsi.c b/block/iscsi.c index XXXXXXX..XXXXXXX 100644 --- a/block/iscsi.c +++ b/block/iscsi.c @@ -XXX,XX +XXX,XX @@ static void iscsi_detach_aio_context(BlockDriverState *bs) iscsilun->events = 0; if (iscsilun->nop_timer) { - timer_del(iscsilun->nop_timer); timer_free(iscsilun->nop_timer); iscsilun->nop_timer = NULL; } if (iscsilun->event_timer) { - timer_del(iscsilun->event_timer); timer_free(iscsilun->event_timer); iscsilun->event_timer = NULL; } diff --git a/block/nbd.c b/block/nbd.c index XXXXXXX..XXXXXXX 100644 --- a/block/nbd.c +++ b/block/nbd.c @@ -XXX,XX +XXX,XX @@ static void nbd_recv_coroutines_wake_all(BDRVNBDState *s) static void reconnect_delay_timer_del(BDRVNBDState *s) { if (s->reconnect_delay_timer) { - timer_del(s->reconnect_delay_timer); timer_free(s->reconnect_delay_timer); s->reconnect_delay_timer = NULL; } diff --git a/block/qcow2.c b/block/qcow2.c index XXXXXXX..XXXXXXX 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -XXX,XX +XXX,XX @@ static void cache_clean_timer_del(BlockDriverState *bs) { BDRVQcow2State *s = bs->opaque; if (s->cache_clean_timer) { - timer_del(s->cache_clean_timer); timer_free(s->cache_clean_timer); s->cache_clean_timer = NULL; } diff --git a/hw/block/nvme.c b/hw/block/nvme.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/nvme.c +++ b/hw/block/nvme.c @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_io_cmd(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_sq(NvmeSQueue *sq, NvmeCtrl *n) { n->sq[sq->sqid] = NULL; - timer_del(sq->timer); timer_free(sq->timer); g_free(sq->io_req); if (sq->sqid) { @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_get_log(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_cq(NvmeCQueue *cq, NvmeCtrl *n) { n->cq[cq->cqid] = NULL; - timer_del(cq->timer); timer_free(cq->timer); msix_vector_unuse(&n->parent_obj, cq->vector); if (cq->cqid) { diff --git a/hw/char/serial.c b/hw/char/serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/serial.c +++ b/hw/char/serial.c @@ -XXX,XX +XXX,XX @@ static void serial_unrealize(DeviceState *dev) qemu_chr_fe_deinit(&s->chr, false); - timer_del(s->modem_status_poll); timer_free(s->modem_status_poll); - timer_del(s->fifo_timeout_timer); timer_free(s->fifo_timeout_timer); fifo8_destroy(&s->recv_fifo); diff --git a/hw/char/virtio-serial-bus.c b/hw/char/virtio-serial-bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/virtio-serial-bus.c +++ b/hw/char/virtio-serial-bus.c @@ -XXX,XX +XXX,XX @@ static void virtio_serial_post_load_timer_cb(void *opaque) } } g_free(s->post_load->connected); - timer_del(s->post_load->timer); timer_free(s->post_load->timer); g_free(s->post_load); s->post_load = NULL; @@ -XXX,XX +XXX,XX @@ static void virtio_serial_device_unrealize(DeviceState *dev) g_free(vser->ports_map); if (vser->post_load) { g_free(vser->post_load->connected); - timer_del(vser->post_load->timer); timer_free(vser->post_load->timer); g_free(vser->post_load); } diff --git a/hw/ide/core.c b/hw/ide/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/core.c +++ b/hw/ide/core.c @@ -XXX,XX +XXX,XX @@ void ide_init2(IDEBus *bus, qemu_irq irq) void ide_exit(IDEState *s) { - timer_del(s->sector_write_timer); timer_free(s->sector_write_timer); qemu_vfree(s->smart_selftest_data); qemu_vfree(s->io_buffer); diff --git a/hw/input/hid.c b/hw/input/hid.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/hid.c +++ b/hw/input/hid.c @@ -XXX,XX +XXX,XX @@ static void hid_idle_timer(void *opaque) static void hid_del_idle_timer(HIDState *hs) { if (hs->idle_timer) { - timer_del(hs->idle_timer); timer_free(hs->idle_timer); hs->idle_timer = NULL; } diff --git a/hw/intc/apic.c b/hw/intc/apic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/apic.c +++ b/hw/intc/apic.c @@ -XXX,XX +XXX,XX @@ static void apic_unrealize(DeviceState *dev) { APICCommonState *s = APIC(dev); - timer_del(s->timer); timer_free(s->timer); local_apics[s->id] = NULL; } diff --git a/hw/intc/ioapic.c b/hw/intc/ioapic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/ioapic.c +++ b/hw/intc/ioapic.c @@ -XXX,XX +XXX,XX @@ static void ioapic_unrealize(DeviceState *dev) { IOAPICCommonState *s = IOAPIC_COMMON(dev); - timer_del(s->delayed_ioapic_service_timer); timer_free(s->delayed_ioapic_service_timer); } diff --git a/hw/ipmi/ipmi_bmc_extern.c b/hw/ipmi/ipmi_bmc_extern.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ipmi/ipmi_bmc_extern.c +++ b/hw/ipmi/ipmi_bmc_extern.c @@ -XXX,XX +XXX,XX @@ static void ipmi_bmc_extern_finalize(Object *obj) { IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(obj); - timer_del(ibe->extern_timer); timer_free(ibe->extern_timer); } diff --git a/hw/net/e1000.c b/hw/net/e1000.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000.c +++ b/hw/net/e1000.c @@ -XXX,XX +XXX,XX @@ pci_e1000_uninit(PCIDevice *dev) { E1000State *d = E1000(dev); - timer_del(d->autoneg_timer); timer_free(d->autoneg_timer); - timer_del(d->mit_timer); timer_free(d->mit_timer); - timer_del(d->flush_queue_timer); timer_free(d->flush_queue_timer); qemu_del_nic(d->nic); } diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000e_core.c +++ b/hw/net/e1000e_core.c @@ -XXX,XX +XXX,XX @@ e1000e_intrmgr_pci_unint(E1000ECore *core) { int i; - timer_del(core->radv.timer); timer_free(core->radv.timer); - timer_del(core->rdtr.timer); timer_free(core->rdtr.timer); - timer_del(core->raid.timer); timer_free(core->raid.timer); - timer_del(core->tadv.timer); timer_free(core->tadv.timer); - timer_del(core->tidv.timer); timer_free(core->tidv.timer); - timer_del(core->itr.timer); timer_free(core->itr.timer); for (i = 0; i < E1000E_MSIX_VEC_NUM; i++) { - timer_del(core->eitr[i].timer); timer_free(core->eitr[i].timer); } } @@ -XXX,XX +XXX,XX @@ e1000e_core_pci_uninit(E1000ECore *core) { int i; - timer_del(core->autoneg_timer); timer_free(core->autoneg_timer); e1000e_intrmgr_pci_unint(core); diff --git a/hw/net/pcnet-pci.c b/hw/net/pcnet-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/pcnet-pci.c +++ b/hw/net/pcnet-pci.c @@ -XXX,XX +XXX,XX @@ static void pci_pcnet_uninit(PCIDevice *dev) PCIPCNetState *d = PCI_PCNET(dev); qemu_free_irq(d->state.irq); - timer_del(d->state.poll_timer); timer_free(d->state.poll_timer); qemu_del_nic(d->state.nic); } diff --git a/hw/net/rtl8139.c b/hw/net/rtl8139.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/rtl8139.c +++ b/hw/net/rtl8139.c @@ -XXX,XX +XXX,XX @@ static void pci_rtl8139_uninit(PCIDevice *dev) g_free(s->cplus_txbuffer); s->cplus_txbuffer = NULL; - timer_del(s->timer); timer_free(s->timer); qemu_del_nic(s->nic); } diff --git a/hw/net/spapr_llan.c b/hw/net/spapr_llan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/spapr_llan.c +++ b/hw/net/spapr_llan.c @@ -XXX,XX +XXX,XX @@ static void spapr_vlan_instance_finalize(Object *obj) } if (dev->rxp_timer) { - timer_del(dev->rxp_timer); timer_free(dev->rxp_timer); } } diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/virtio-net.c +++ b/hw/net/virtio-net.c @@ -XXX,XX +XXX,XX @@ static void virtio_net_rsc_cleanup(VirtIONet *n) g_free(seg); } - timer_del(chain->drain_timer); timer_free(chain->drain_timer); QTAILQ_REMOVE(&n->rsc_chains, chain, next); g_free(chain); @@ -XXX,XX +XXX,XX @@ static void virtio_net_del_queue(VirtIONet *n, int index) virtio_del_queue(vdev, index * 2); if (q->tx_timer) { - timer_del(q->tx_timer); timer_free(q->tx_timer); q->tx_timer = NULL; } else { diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ void pci_dereg_ioat(S390PCIIOMMU *iommu) void fmb_timer_free(S390PCIBusDevice *pbdev) { if (pbdev->fmb_timer) { - timer_del(pbdev->fmb_timer); timer_free(pbdev->fmb_timer); pbdev->fmb_timer = NULL; } diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_instance_finalize(Object *obj) { SDState *sd = SD_CARD(obj); - timer_del(sd->ocr_power_timer); timer_free(sd->ocr_power_timer); } diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ void sdhci_initfn(SDHCIState *s) void sdhci_uninitfn(SDHCIState *s) { - timer_del(s->insert_timer); timer_free(s->insert_timer); - timer_del(s->transfer_timer); timer_free(s->transfer_timer); g_free(s->fifo_buffer); diff --git a/hw/usb/dev-hub.c b/hw/usb/dev-hub.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/dev-hub.c +++ b/hw/usb/dev-hub.c @@ -XXX,XX +XXX,XX @@ static void usb_hub_unrealize(USBDevice *dev) &s->ports[i].port); } - timer_del(s->port_timer); timer_free(s->port_timer); } diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.c +++ b/hw/usb/hcd-ehci.c @@ -XXX,XX +XXX,XX @@ void usb_ehci_unrealize(EHCIState *s, DeviceState *dev) trace_usb_ehci_unrealize(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-ohci-pci.c b/hw/usb/hcd-ohci-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ohci-pci.c +++ b/hw/usb/hcd-ohci-pci.c @@ -XXX,XX +XXX,XX @@ static void usb_ohci_exit(PCIDevice *dev) usb_bus_release(&s->bus); } - timer_del(s->eof_timer); timer_free(s->eof_timer); } diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-uhci.c +++ b/hw/usb/hcd-uhci.c @@ -XXX,XX +XXX,XX @@ static void usb_uhci_exit(PCIDevice *dev) trace_usb_uhci_exit(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-xhci.c +++ b/hw/usb/hcd-xhci.c @@ -XXX,XX +XXX,XX @@ static void usb_xhci_unrealize(DeviceState *dev) } if (xhci->mfwrap_timer) { - timer_del(xhci->mfwrap_timer); timer_free(xhci->mfwrap_timer); xhci->mfwrap_timer = NULL; } diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/redirect.c +++ b/hw/usb/redirect.c @@ -XXX,XX +XXX,XX @@ static void usbredir_unrealize(USBDevice *udev) qemu_bh_delete(dev->chardev_close_bh); qemu_bh_delete(dev->device_reject_bh); - timer_del(dev->attach_timer); timer_free(dev->attach_timer); usbredir_cleanup_device_queues(dev); diff --git a/hw/vfio/display.c b/hw/vfio/display.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vfio/display.c +++ b/hw/vfio/display.c @@ -XXX,XX +XXX,XX @@ static void vfio_display_edid_exit(VFIODisplay *dpy) g_free(dpy->edid_regs); g_free(dpy->edid_blob); - timer_del(dpy->edid_link_timer); timer_free(dpy->edid_link_timer); } diff --git a/hw/virtio/vhost-vsock-common.c b/hw/virtio/vhost-vsock-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/vhost-vsock-common.c +++ b/hw/virtio/vhost-vsock-common.c @@ -XXX,XX +XXX,XX @@ static void vhost_vsock_common_post_load_timer_cleanup(VHostVSockCommon *vvc) return; } - timer_del(vvc->post_load_timer); timer_free(vvc->post_load_timer); vvc->post_load_timer = NULL; } diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-balloon.c +++ b/hw/virtio/virtio-balloon.c @@ -XXX,XX +XXX,XX @@ static bool balloon_stats_enabled(const VirtIOBalloon *s) static void balloon_stats_destroy_timer(VirtIOBalloon *s) { if (balloon_stats_enabled(s)) { - timer_del(s->stats_timer); timer_free(s->stats_timer); s->stats_timer = NULL; s->stats_poll_interval = 0; diff --git a/hw/virtio/virtio-rng.c b/hw/virtio/virtio-rng.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-rng.c +++ b/hw/virtio/virtio-rng.c @@ -XXX,XX +XXX,XX @@ static void virtio_rng_device_unrealize(DeviceState *dev) VirtIORNG *vrng = VIRTIO_RNG(dev); qemu_del_vm_change_state_handler(vrng->vmstate); - timer_del(vrng->rate_limit_timer); timer_free(vrng->rate_limit_timer); virtio_del_queue(vdev, 0); virtio_cleanup(vdev); diff --git a/hw/watchdog/wdt_diag288.c b/hw/watchdog/wdt_diag288.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_diag288.c +++ b/hw/watchdog/wdt_diag288.c @@ -XXX,XX +XXX,XX @@ static void wdt_diag288_unrealize(DeviceState *dev) { DIAG288State *diag288 = DIAG288(dev); - timer_del(diag288->timer); timer_free(diag288->timer); } diff --git a/hw/watchdog/wdt_i6300esb.c b/hw/watchdog/wdt_i6300esb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_i6300esb.c +++ b/hw/watchdog/wdt_i6300esb.c @@ -XXX,XX +XXX,XX @@ static void i6300esb_exit(PCIDevice *dev) { I6300State *d = WATCHDOG_I6300ESB_DEVICE(dev); - timer_del(d->timer); timer_free(d->timer); } diff --git a/migration/colo.c b/migration/colo.c index XXXXXXX..XXXXXXX 100644 --- a/migration/colo.c +++ b/migration/colo.c @@ -XXX,XX +XXX,XX @@ out: * error. */ colo_compare_unregister_notifier(&packets_compare_notifier); - timer_del(s->colo_delay_timer); timer_free(s->colo_delay_timer); qemu_event_destroy(&s->colo_checkpoint_event); diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/monitor/hmp-cmds.c +++ b/monitor/hmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void hmp_migrate_status_cb(void *opaque) error_report("%s", info->error_desc); } monitor_resume(status->mon); - timer_del(status->timer); timer_free(status->timer); g_free(status); } diff --git a/net/announce.c b/net/announce.c index XXXXXXX..XXXXXXX 100644 --- a/net/announce.c +++ b/net/announce.c @@ -XXX,XX +XXX,XX @@ void qemu_announce_timer_del(AnnounceTimer *timer, bool free_named) { bool free_timer = false; if (timer->tm) { - timer_del(timer->tm); timer_free(timer->tm); timer->tm = NULL; } diff --git a/net/colo-compare.c b/net/colo-compare.c index XXXXXXX..XXXXXXX 100644 --- a/net/colo-compare.c +++ b/net/colo-compare.c @@ -XXX,XX +XXX,XX @@ static void colo_compare_timer_init(CompareState *s) static void colo_compare_timer_del(CompareState *s) { if (s->packet_check_timer) { - timer_del(s->packet_check_timer); timer_free(s->packet_check_timer); s->packet_check_timer = NULL; } diff --git a/net/slirp.c b/net/slirp.c index XXXXXXX..XXXXXXX 100644 --- a/net/slirp.c +++ b/net/slirp.c @@ -XXX,XX +XXX,XX @@ static void *net_slirp_timer_new(SlirpTimerCb cb, static void net_slirp_timer_free(void *timer, void *opaque) { - timer_del(timer); timer_free(timer); } diff --git a/replay/replay-debugging.c b/replay/replay-debugging.c index XXXXXXX..XXXXXXX 100644 --- a/replay/replay-debugging.c +++ b/replay/replay-debugging.c @@ -XXX,XX +XXX,XX @@ static void replay_delete_break(void) assert(replay_mutex_locked()); if (replay_break_timer) { - timer_del(replay_break_timer); timer_free(replay_break_timer); replay_break_timer = NULL; } diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_finalize(Object *obj) #if !defined(CONFIG_USER_ONLY) S390CPU *cpu = S390_CPU(obj); - timer_del(cpu->env.tod_timer); timer_free(cpu->env.tod_timer); - timer_del(cpu->env.cpu_timer); timer_free(cpu->env.cpu_timer); qemu_unregister_reset(s390_cpu_machine_reset_cb, cpu); diff --git a/ui/console.c b/ui/console.c index XXXXXXX..XXXXXXX 100644 --- a/ui/console.c +++ b/ui/console.c @@ -XXX,XX +XXX,XX @@ static void gui_setup_refresh(DisplayState *ds) timer_mod(ds->gui_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME)); } if (!need_timer && ds->gui_timer != NULL) { - timer_del(ds->gui_timer); timer_free(ds->gui_timer); ds->gui_timer = NULL; } diff --git a/ui/spice-core.c b/ui/spice-core.c index XXXXXXX..XXXXXXX 100644 --- a/ui/spice-core.c +++ b/ui/spice-core.c @@ -XXX,XX +XXX,XX @@ static void timer_cancel(SpiceTimer *timer) static void timer_remove(SpiceTimer *timer) { - timer_del(timer->timer); timer_free(timer->timer); g_free(timer); } diff --git a/util/throttle.c b/util/throttle.c index XXXXXXX..XXXXXXX 100644 --- a/util/throttle.c +++ b/util/throttle.c @@ -XXX,XX +XXX,XX @@ static void throttle_timer_destroy(QEMUTimer **timer) { assert(*timer != NULL); - timer_del(*timer); timer_free(*timer); *timer = NULL; } -- 2.20.1 The Arm CPU finalize function uses a sequence of timer_del(), timer_deinit(), timer_free() to free the timer. The timer_deinit() step in this was always unnecessary, and now the timer_del() is implied by timer_free(), so we can collapse this down to simply calling timer_free(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-5-peter.maydell@linaro.org --- target/arm/cpu.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { - timer_del(cpu->pmu_timer); - timer_deinit(cpu->pmu_timer); timer_free(cpu->pmu_timer); } #endif -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the digic_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 3 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf5b04084 in digic_timer_init /qemu/hw/timer/digic-timer.c:142 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b40e84 in digic_init /qemu/hw/arm/digic.c:46 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/digic-timer.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/digic-timer.c +++ b/hw/timer/digic-timer.c @@ -XXX,XX +XXX,XX @@ static void digic_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void digic_timer_finalize(Object *obj) +{ + DigicTimerState *s = DIGIC_TIMER(obj); + + ptimer_free(s->ptimer); +} + static void digic_timer_class_init(ObjectClass *klass, void *class_data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo digic_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(DigicTimerState), .instance_init = digic_timer_init, + .instance_finalize = digic_timer_finalize, .class_init = digic_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the a10_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 6 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf57415e8 in a10_pit_init /qemu/hw/timer/allwinner-a10-pit.c:278 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #9 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #10 0xaaabf5b94680 in aw_a10_init /qemu/hw/arm/allwinner-a10.c:49 #11 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #12 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/allwinner-a10-pit.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/allwinner-a10-pit.c b/hw/timer/allwinner-a10-pit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/allwinner-a10-pit.c +++ b/hw/timer/allwinner-a10-pit.c @@ -XXX,XX +XXX,XX @@ static void a10_pit_init(Object *obj) } } +static void a10_pit_finalize(Object *obj) +{ + AwA10PITState *s = AW_A10_PIT(obj); + int i; + + for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) { + ptimer_free(s->timer[i]); + } +} + static void a10_pit_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo a10_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AwA10PITState), .instance_init = a10_pit_init, + .instance_finalize = a10_pit_finalize, .class_init = a10_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_rtc_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf57b3934 in exynos4210_rtc_init /qemu/hw/rtc/exynos4210_rtc.c:567 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/rtc/exynos4210_rtc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/rtc/exynos4210_rtc.c b/hw/rtc/exynos4210_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/exynos4210_rtc.c +++ b/hw/rtc/exynos4210_rtc.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_rtc_finalize(Object *obj) +{ + Exynos4210RTCState *s = EXYNOS4210_RTC(obj); + + ptimer_free(s->ptimer); + ptimer_free(s->ptimer_1Hz); +} + static void exynos4210_rtc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_rtc_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210RTCState), .instance_init = exynos4210_rtc_init, + .instance_finalize = exynos4210_rtc_finalize, .class_init = exynos4210_rtc_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_pwm_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 240 byte(s) in 5 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf56a36cc in exynos4210_pwm_init /qemu/hw/timer/exynos4210_pwm.c:401 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #9 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #10 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #11 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #12 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_pwm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/exynos4210_pwm.c b/hw/timer/exynos4210_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_pwm.c +++ b/hw/timer/exynos4210_pwm.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_pwm_finalize(Object *obj) +{ + Exynos4210PWMState *s = EXYNOS4210_PWM(obj); + int i; + + for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static void exynos4210_pwm_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_pwm_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210PWMState), .instance_init = exynos4210_pwm_init, + .instance_finalize = exynos4210_pwm_finalize, .class_init = exynos4210_pwm_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mss_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 2 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf58a0010 in mss_timer_init /qemu/hw/timer/mss-timer.c:235 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b8316c in m2sxxx_soc_initfn /qemu/hw/arm/msf2-soc.c:70 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/mss-timer.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/mss-timer.c +++ b/hw/timer/mss-timer.c @@ -XXX,XX +XXX,XX @@ static void mss_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &t->mmio); } +static void mss_timer_finalize(Object *obj) +{ + MSSTimerState *t = MSS_TIMER(obj); + int i; + + for (i = 0; i < NUM_TIMERS; i++) { + struct Msf2Timer *st = &t->timers[i]; + + ptimer_free(st->ptimer); + } +} + static const VMStateDescription vmstate_timers = { .name = "mss-timer-block", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mss_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(MSSTimerState), .instance_init = mss_timer_init, + .instance_finalize = mss_timer_finalize, .class_init = mss_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mv88w8618_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 4 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf5bb2290 in mv88w8618_timer_init /qemu/hw/arm/musicpal.c:862 #7 0xaaabf5bb2290 in mv88w8618_pit_init /qemu/hw/arm/musicpal.c:954 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf5a95540 in qdev_device_help /qemu/softmmu/qdev-monitor.c:283 #12 0xaaabf5a96940 in qmp_device_add /qemu/softmmu/qdev-monitor.c:801 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void mv88w8618_pit_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void mv88w8618_pit_finalize(Object *obj) +{ + SysBusDevice *dev = SYS_BUS_DEVICE(obj); + mv88w8618_pit_state *s = MV88W8618_PIT(dev); + int i; + + for (i = 0; i < 4; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static const VMStateDescription mv88w8618_timer_vmsd = { .name = "timer", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mv88w8618_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(mv88w8618_pit_state), .instance_init = mv88w8618_pit_init, + .instance_finalize = mv88w8618_pit_finalize, .class_init = mv88w8618_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_mct_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf56b01a0 in exynos4210_mct_init /qemu/hw/timer/exynos4210_mct.c:1505 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_mct_finalize(Object *obj) +{ + int i; + Exynos4210MCTState *s = EXYNOS4210_MCT(obj); + + ptimer_free(s->g_timer.ptimer_frc); + + for (i = 0; i < 2; i++) { + ptimer_free(s->l_timer[i].tick_timer.ptimer_tick); + ptimer_free(s->l_timer[i].ptimer_frc); + } +} + static void exynos4210_mct_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_mct_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210MCTState), .instance_init = exynos4210_mct_init, + .instance_finalize = exynos4210_mct_finalize, .class_init = exynos4210_mct_class_init, }; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> U-Boot expects PMU_MISC0 register bit 7 is set (see init_bandgap() in arch/arm/mach-imx/mx6/soc.c) during boot. This bit indicates the bandgap has stabilized. With this change, the latest upstream U-Boot (v2021.01-rc3) for imx6 sabrelite board (mx6qsabrelite_defconfig), with a slight change made by switching CONFIG_OF_SEPARATE to CONFIG_OF_EMBED, boots to U-Boot shell on QEMU with the following command: $ qemu-system-arm -M sabrelite -smp 4 -m 1G -kernel u-boot \ -display none -serial null -serial stdio Boot log below: U-Boot 2021.01-rc3 (Dec 12 2020 - 17:40:02 +0800) CPU: Freescale i.MX?? rev1.0 at 792 MHz Reset cause: POR Model: Freescale i.MX6 Quad SABRE Lite Board Board: SABRE Lite I2C: ready DRAM: 1 GiB force_idle_bus: sda=0 scl=0 sda.gp=0x5c scl.gp=0x55 force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0x6d scl.gp=0x6c force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0xcb scl.gp=0x5 force_idle_bus: failed to clear bus, sda=0 scl=0 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - No block device, using default environment In: serial Out: serial Err: serial Net: Board Net Initialization Failed No ethernet found. starting USB... Bus usb@2184000: usb dr_mode not found USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 0 => Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-2-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[PMU_REG_3P0] = 0x00000F74; s->analog[PMU_REG_2P5] = 0x00005071; s->analog[PMU_REG_CORE] = 0x00402010; - s->analog[PMU_MISC0] = 0x04000000; + s->analog[PMU_MISC0] = 0x04000080; s->analog[PMU_MISC1] = 0x00000000; s->analog[PMU_MISC2] = 0x00272727; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> Currently when U-Boot boots, it prints "??" for i.MX processor: CPU: Freescale i.MX?? rev1.0 at 792 MHz The register that was used to determine the silicon type is undocumented in the latest IMX6DQRM (Rev. 6, 05/2020), but we can refer to get_cpu_rev() in arch/arm/mach-imx/mx6/soc.c in the U-Boot source codes that USB_ANALOG_DIGPROG is used. Update its reset value to indicate i.MX6Q. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-3-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[USB_ANALOG_USB2_VBUS_DETECT] = 0x00000004; s->analog[USB_ANALOG_USB2_CHRG_DETECT] = 0x00000000; s->analog[USB_ANALOG_USB2_MISC] = 0x00000002; - s->analog[USB_ANALOG_DIGPROG] = 0x00000000; + s->analog[USB_ANALOG_DIGPROG] = 0x00630000; /* all PLLs need to be locked */ s->analog[CCM_ANALOG_PLL_ARM] |= CCM_ANALOG_PLL_LOCK; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> At present, when booting U-Boot on QEMU sabrelite, we see: Net: Board Net Initialization Failed No ethernet found. U-Boot scans PHY at address 4/5/6/7 (see board_eth_init() in the U-Boot source: board/boundary/nitrogen6x/nitrogen6x.c). On the real board, the Ethernet PHY is at address 6. Adjust this by updating the "fec-phy-num" property of the fsl_imx6 SoC object. With this change, U-Boot sees the PHY but complains MAC address: Net: using phy at 6 FEC [PRIME] Error: FEC address not set. This is due to U-Boot tries to read the MAC address from the fuse, which QEMU does not have any valid content filled in. However this does not prevent the Ethernet from working in QEMU. We just need to set up the MAC address later in the U-Boot command shell, by: => setenv ethaddr 00:11:22:33:44:55 Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-4-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sabrelite.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/sabrelite.c b/hw/arm/sabrelite.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sabrelite.c +++ b/hw/arm/sabrelite.c @@ -XXX,XX +XXX,XX @@ static void sabrelite_init(MachineState *machine) s = FSL_IMX6(object_new(TYPE_FSL_IMX6)); object_property_add_child(OBJECT(machine), "soc", OBJECT(s)); + + /* Ethernet PHY address is 6 */ + object_property_set_int(OBJECT(s), "fec-phy-num", 6, &error_fatal); + qdev_realize(DEVICE(s), NULL, &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR, -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> This adds the target guide for SABRE Lite board, and documents how to boot a Linux kernel and U-Boot bootloader. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-5-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + 2 files changed, 120 insertions(+) create mode 100644 docs/system/arm/sabrelite.rst diff --git a/docs/system/arm/sabrelite.rst b/docs/system/arm/sabrelite.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/sabrelite.rst @@ -XXX,XX +XXX,XX @@ +Boundary Devices SABRE Lite (``sabrelite``) +=========================================== + +Boundary Devices SABRE Lite i.MX6 Development Board is a low-cost development +platform featuring the powerful Freescale / NXP Semiconductor's i.MX 6 Quad +Applications Processor. + +Supported devices +----------------- + +The SABRE Lite machine supports the following devices: + + * Up to 4 Cortex A9 cores + * Generic Interrupt Controller + * 1 Clock Controller Module + * 1 System Reset Controller + * 5 UARTs + * 2 EPIC timers + * 1 GPT timer + * 2 Watchdog timers + * 1 FEC Ethernet controller + * 3 I2C controllers + * 7 GPIO controllers + * 4 SDHC storage controllers + * 4 USB 2.0 host controllers + * 5 ECSPI controllers + * 1 SST 25VF016B flash + +Please note above list is a complete superset the QEMU SABRE Lite machine can +support. For a normal use case, a device tree blob that represents a real world +SABRE Lite board, only exposes a subset of devices to the guest software. + +Boot options +------------ + +The SABRE Lite machine can start using the standard -kernel functionality +for loading a Linux kernel, U-Boot bootloader or ELF executable. + +Running Linux kernel +-------------------- + +Linux mainline v5.10 release is tested at the time of writing. To build a Linux +mainline kernel that can be booted by the SABRE Lite machine, simply configure +the kernel using the imx_v6_v7_defconfig configuration: + +.. code-block:: bash + + $ export ARCH=arm + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make imx_v6_v7_defconfig + $ make + +To boot the newly built Linux kernel in QEMU with the SABRE Lite machine, use: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/imx6q-sabrelite.dtb \ + -initrd /path/to/rootfs.ext4 \ + -append "root=/dev/ram" + +Running U-Boot +-------------- + +U-Boot mainline v2020.10 release is tested at the time of writing. To build a +U-Boot mainline bootloader that can be booted by the SABRE Lite machine, use +the mx6qsabrelite_defconfig with similar commands as described above for Linux: + +.. code-block:: bash + + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make mx6qsabrelite_defconfig + +Note we need to adjust settings by: + +.. code-block:: bash + + $ make menuconfig + +then manually select the following configuration in U-Boot: + + Device Tree Control > Provider of DTB for DT Control > Embedded DTB + +To start U-Boot using the SABRE Lite machine, provide the u-boot binary to +the -kernel argument, along with an SD card image with rootfs: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel u-boot + +The following example shows booting Linux kernel from dhcp, and uses the +rootfs on an SD card. This requires some additional command line parameters +for QEMU: + +.. code-block:: none + + -nic user,tftp=/path/to/kernel/zImage \ + -drive file=sdcard.img,id=rootfs -device sd-card,drive=rootfs + +The directory for the built-in TFTP server should also contain the device tree +blob of the SABRE Lite board. The sample SD card image was populated with the +root file system with one single partition. You may adjust the kernel "root=" +boot parameter accordingly. + +After U-Boot boots, type the following commands in the U-Boot command shell to +boot the Linux kernel: + +.. code-block:: none + + => setenv ethaddr 00:11:22:33:44:55 + => setenv bootfile zImage + => dhcp + => tftpboot 14000000 imx6q-sabrelite.dtb + => setenv bootargs root=/dev/mmcblk3p1 + => bootz 12000000 - 14000000 diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/versatile arm/vexpress arm/aspeed + arm/sabrelite arm/digic arm/musicpal arm/gumstix -- 2.20.1