Second lot of ARM changes to sneak in before freeze: * fixed version of the raspi2 sd controller patches * GICv3 save/restore * v7M QOMify I've also included the Linux header update patches stolen from Paolo's pullreq since it hasn't quite hit master yet. thanks -- PMM The following changes since commit 1bbe5dc66b770d7bedd1d51d7935da948a510dd6: Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170228' into staging (2017-02-28 14:50:17 +0000) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170228-1 for you to fetch changes up to 1eeb5c7deacbfb4d4cad17590a16a99f3d85eabb: bcm2835: add sdhost and gpio controllers (2017-02-28 17:10:00 +0000) ---------------------------------------------------------------- target-arm queue: * raspi2: add gpio controller and sdhost controller, with the wiring so the guest can switch which controller the SD card is attached to (this is sufficient to get raspbian kernels to boot) * GICv3: support state save/restore from KVM * update Linux headers to 4.11 * refactor and QOMify the ARMv7M container object ---------------------------------------------------------------- Clement Deschamps (3): hw/sd: add card-reparenting function bcm2835_gpio: add bcm2835 gpio controller bcm2835: add sdhost and gpio controllers Paolo Bonzini (2): update-linux-headers: update for 4.11 update Linux headers to 4.11 Peter Maydell (12): armv7m: Abstract out the "load kernel" code armv7m: Move NVICState struct definition into header armv7m: QOMify the armv7m container armv7m: Use QOMified armv7m object in armv7m_init() armv7m: Make ARMv7M object take memory region link armv7m: Make NVIC expose a memory region rather than mapping itself armv7m: Make bitband device take the address space to access armv7m: Don't put core v7M devices under CONFIG_STELLARIS armv7m: Split systick out from NVIC stm32f205: Create armv7m object without using armv7m_init() stm32f205: Rename 'nvic' local to 'armv7m' qdev: Have qdev_set_parent_bus() handle devices already on a bus Vijaya Kumar K (4): hw/intc/arm_gicv3_kvm: Add ICC_SRE_EL1 register to vmstate hw/intc/arm_gicv3_kvm: Implement get/put functions target-arm: Add GICv3CPUState in CPUARMState struct hw/intc/arm_gicv3_kvm: Reset GICv3 cpu interface registers hw/gpio/Makefile.objs | 1 + hw/intc/Makefile.objs | 2 +- hw/timer/Makefile.objs | 1 + hw/intc/gicv3_internal.h | 3 + include/hw/arm/arm.h | 12 + include/hw/arm/armv7m.h | 63 +++ include/hw/arm/armv7m_nvic.h | 62 ++ include/hw/arm/bcm2835_peripherals.h | 4 + include/hw/arm/stm32f205_soc.h | 4 +- include/hw/gpio/bcm2835_gpio.h | 39 ++ include/hw/intc/arm_gicv3_common.h | 1 + include/hw/sd/sd.h | 11 + include/hw/timer/armv7m_systick.h | 34 ++ include/standard-headers/asm-x86/hyperv.h | 8 + include/standard-headers/linux/input-event-codes.h | 2 +- include/standard-headers/linux/pci_regs.h | 25 + include/standard-headers/linux/virtio_ids.h | 1 + linux-headers/asm-arm/kvm.h | 15 + linux-headers/asm-arm/unistd-common.h | 357 ++++++++++++ linux-headers/asm-arm/unistd-eabi.h | 5 + linux-headers/asm-arm/unistd-oabi.h | 17 + linux-headers/asm-arm/unistd.h | 419 +------------- linux-headers/asm-arm64/kvm.h | 13 + linux-headers/asm-powerpc/kvm.h | 27 + linux-headers/asm-powerpc/unistd.h | 1 + linux-headers/asm-x86/kvm_para.h | 13 +- linux-headers/linux/kvm.h | 24 +- linux-headers/linux/kvm_para.h | 2 + linux-headers/linux/userfaultfd.h | 67 ++- linux-headers/linux/vfio.h | 10 + target/arm/cpu.h | 2 + hw/arm/armv7m.c | 379 ++++++++----- hw/arm/bcm2835_peripherals.c | 43 +- hw/arm/netduino2.c | 7 +- hw/arm/stm32f205_soc.c | 28 +- hw/core/qdev.c | 14 + hw/gpio/bcm2835_gpio.c | 353 ++++++++++++ hw/intc/arm_gicv3_common.c | 38 ++ hw/intc/arm_gicv3_cpuif.c | 8 + hw/intc/arm_gicv3_kvm.c | 629 ++++++++++++++++++++- hw/intc/armv7m_nvic.c | 214 ++----- hw/sd/core.c | 27 + hw/timer/armv7m_systick.c | 240 ++++++++ default-configs/arm-softmmu.mak | 2 + hw/timer/trace-events | 6 + scripts/update-linux-headers.sh | 13 +- 46 files changed, 2479 insertions(+), 767 deletions(-) create mode 100644 include/hw/arm/armv7m.h create mode 100644 include/hw/arm/armv7m_nvic.h create mode 100644 include/hw/gpio/bcm2835_gpio.h create mode 100644 include/hw/timer/armv7m_systick.h create mode 100644 linux-headers/asm-arm/unistd-common.h create mode 100644 linux-headers/asm-arm/unistd-eabi.h create mode 100644 linux-headers/asm-arm/unistd-oabi.h create mode 100644 hw/gpio/bcm2835_gpio.c create mode 100644 hw/timer/armv7m_systick.c Abstract the "load kernel" code out of armv7m_init() into its own function. This includes the registration of the CPU reset function, to parallel how we handle this for A profile cores. We make the function public so that boards which choose to directly instantiate an ARMv7M device object can call it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-2-git-send-email-peter.maydell@linaro.org --- include/hw/arm/arm.h | 12 ++++++++++++ hw/arm/armv7m.c | 23 ++++++++++++++++++----- 2 files changed, 30 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/arm.h b/include/hw/arm/arm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/arm.h +++ b/include/hw/arm/arm.h @@ -XXX,XX +XXX,XX @@ typedef enum { /* armv7m.c */ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, const char *kernel_filename, const char *cpu_model); +/** + * armv7m_load_kernel: + * @cpu: CPU + * @kernel_filename: file to load + * @mem_size: mem_size: maximum image size to load + * + * Load the guest image for an ARMv7M system. This must be called by + * any ARMv7M board, either directly or via armv7m_init(). (This is + * necessary to ensure that the CPU resets correctly on system reset, + * as well as for kernel loading.) + */ +void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size); /* * struct used as a parameter of the arm_load_kernel machine init diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, ARMCPU *cpu; CPUARMState *env; DeviceState *nvic; - int image_size; - uint64_t entry; - uint64_t lowaddr; - int big_endian; if (cpu_model == NULL) { cpu_model = "cortex-m3"; @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, qdev_init_nofail(nvic); sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); + armv7m_load_kernel(cpu, kernel_filename, mem_size); + return nvic; +} + +void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) +{ + int image_size; + uint64_t entry; + uint64_t lowaddr; + int big_endian; #ifdef TARGET_WORDS_BIGENDIAN big_endian = 1; @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, } } + /* CPU objects (unlike devices) are not automatically reset on system + * reset, so we must always register a handler to do so. Unlike + * A-profile CPUs, we don't need to do anything special in the + * handler to arrange that it starts correctly. + * This is arguably the wrong place to do this, but it matches the + * way A-profile does it. Note that this means that every M profile + * board must call this function! + */ qemu_register_reset(armv7m_reset, cpu); - return nvic; } static Property bitband_properties[] = { -- 2.7.4 Move the NVICState struct definition into a header, so we can embed it into other QOM objects like SoCs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-3-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m_nvic.h | 66 ++++++++++++++++++++++++++++++++++++++++++++ hw/intc/armv7m_nvic.c | 49 +------------------------------- 2 files changed, 67 insertions(+), 48 deletions(-) create mode 100644 include/hw/arm/armv7m_nvic.h diff --git a/include/hw/arm/armv7m_nvic.h b/include/hw/arm/armv7m_nvic.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M NVIC object + * + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell <peter.maydell@linaro.org> + * + * This code is licensed under the GPL version 2 or later. + */ + +#ifndef HW_ARM_ARMV7M_NVIC_H +#define HW_ARM_ARMV7M_NVIC_H + +#include "target/arm/cpu.h" +#include "hw/sysbus.h" + +#define TYPE_NVIC "armv7m_nvic" + +#define NVIC(obj) \ + OBJECT_CHECK(NVICState, (obj), TYPE_NVIC) + +/* Highest permitted number of exceptions (architectural limit) */ +#define NVIC_MAX_VECTORS 512 + +typedef struct VecInfo { + /* Exception priorities can range from -3 to 255; only the unmodifiable + * priority values for RESET, NMI and HardFault can be negative. + */ + int16_t prio; + uint8_t enabled; + uint8_t pending; + uint8_t active; + uint8_t level; /* exceptions <=15 never set level */ +} VecInfo; + +typedef struct NVICState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + ARMCPU *cpu; + + VecInfo vectors[NVIC_MAX_VECTORS]; + uint32_t prigroup; + + /* vectpending and exception_prio are both cached state that can + * be recalculated from the vectors[] array and the prigroup field. + */ + unsigned int vectpending; /* highest prio pending enabled exception */ + int exception_prio; /* group prio of the highest prio active exception */ + + struct { + uint32_t control; + uint32_t reload; + int64_t tick; + QEMUTimer *timer; + } systick; + + MemoryRegion sysregmem; + MemoryRegion container; + + uint32_t num_irq; + qemu_irq excpout; + qemu_irq sysresetreq; +} NVICState; + +#endif diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "qemu/timer.h" #include "hw/arm/arm.h" +#include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" #include "exec/address-spaces.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ * "exception" more or less interchangeably. */ #define NVIC_FIRST_IRQ 16 -#define NVIC_MAX_VECTORS 512 #define NVIC_MAX_IRQ (NVIC_MAX_VECTORS - NVIC_FIRST_IRQ) /* Effective running priority of the CPU when no exception is active @@ -XXX,XX +XXX,XX @@ */ #define NVIC_NOEXC_PRIO 0x100 -typedef struct VecInfo { - /* Exception priorities can range from -3 to 255; only the unmodifiable - * priority values for RESET, NMI and HardFault can be negative. - */ - int16_t prio; - uint8_t enabled; - uint8_t pending; - uint8_t active; - uint8_t level; /* exceptions <=15 never set level */ -} VecInfo; - -typedef struct NVICState { - /*< private >*/ - SysBusDevice parent_obj; - /*< public >*/ - - ARMCPU *cpu; - - VecInfo vectors[NVIC_MAX_VECTORS]; - uint32_t prigroup; - - /* vectpending and exception_prio are both cached state that can - * be recalculated from the vectors[] array and the prigroup field. - */ - unsigned int vectpending; /* highest prio pending enabled exception */ - int exception_prio; /* group prio of the highest prio active exception */ - - struct { - uint32_t control; - uint32_t reload; - int64_t tick; - QEMUTimer *timer; - } systick; - - MemoryRegion sysregmem; - MemoryRegion container; - - uint32_t num_irq; - qemu_irq excpout; - qemu_irq sysresetreq; -} NVICState; - -#define TYPE_NVIC "armv7m_nvic" - -#define NVIC(obj) \ - OBJECT_CHECK(NVICState, (obj), TYPE_NVIC) - static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 }; -- 2.7.4 Create a proper QOM object for the armv7m container, which holds the CPU, the NVIC and the bitband regions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-4-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 51 ++++++++++++++++++ hw/arm/armv7m.c | 139 +++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 178 insertions(+), 12 deletions(-) create mode 100644 include/hw/arm/armv7m.h diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M CPU object + * + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell <peter.maydell@linaro.org> + * + * This code is licensed under the GPL version 2 or later. + */ + +#ifndef HW_ARM_ARMV7M_H +#define HW_ARM_ARMV7M_H + +#include "hw/sysbus.h" +#include "hw/arm/armv7m_nvic.h" + +#define TYPE_BITBAND "ARM,bitband-memory" +#define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + MemoryRegion iomem; + uint32_t base; +} BitBandState; + +#define TYPE_ARMV7M "armv7m" +#define ARMV7M(obj) OBJECT_CHECK(ARMv7MState, (obj), TYPE_ARMV7M) + +#define ARMV7M_NUM_BITBANDS 2 + +/* ARMv7M container object. + * + Unnamed GPIO input lines: external IRQ lines for the NVIC + * + Named GPIO output SYSRESETREQ: signalled for guest AIRCR.SYSRESETREQ + * + Property "cpu-model": CPU model to instantiate + * + Property "num-irq": number of external IRQ lines + */ +typedef struct ARMv7MState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + NVICState nvic; + BitBandState bitband[ARMV7M_NUM_BITBANDS]; + ARMCPU *cpu; + + /* Properties */ + char *cpu_model; +} ARMv7MState; + +#endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "hw/arm/armv7m.h" #include "qapi/error.h" #include "qemu-common.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps bitband_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -#define TYPE_BITBAND "ARM,bitband-memory" -#define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) - -typedef struct { - /*< private >*/ - SysBusDevice parent_obj; - /*< public >*/ - - MemoryRegion iomem; - uint32_t base; -} BitBandState; - static void bitband_init(Object *obj) { BitBandState *s = BITBAND(obj); @@ -XXX,XX +XXX,XX @@ static void armv7m_bitband_init(void) /* Board init. */ +static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { + 0x20000000, 0x40000000 +}; + +static const hwaddr bitband_output_addr[ARMV7M_NUM_BITBANDS] = { + 0x22000000, 0x42000000 +}; + +static void armv7m_instance_init(Object *obj) +{ + ARMv7MState *s = ARMV7M(obj); + int i; + + /* Can't init the cpu here, we don't yet know which model to use */ + + object_initialize(&s->nvic, sizeof(s->nvic), "armv7m_nvic"); + qdev_set_parent_bus(DEVICE(&s->nvic), sysbus_get_default()); + object_property_add_alias(obj, "num-irq", + OBJECT(&s->nvic), "num-irq", &error_abort); + + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + object_initialize(&s->bitband[i], sizeof(s->bitband[i]), TYPE_BITBAND); + qdev_set_parent_bus(DEVICE(&s->bitband[i]), sysbus_get_default()); + } +} + +static void armv7m_realize(DeviceState *dev, Error **errp) +{ + ARMv7MState *s = ARMV7M(dev); + Error *err = NULL; + int i; + char **cpustr; + ObjectClass *oc; + const char *typename; + CPUClass *cc; + + cpustr = g_strsplit(s->cpu_model, ",", 2); + + oc = cpu_class_by_name(TYPE_ARM_CPU, cpustr[0]); + if (!oc) { + error_setg(errp, "Unknown CPU model %s", cpustr[0]); + g_strfreev(cpustr); + return; + } + + cc = CPU_CLASS(oc); + typename = object_class_get_name(oc); + cc->parse_features(typename, cpustr[1], &err); + g_strfreev(cpustr); + if (err) { + error_propagate(errp, err); + return; + } + + s->cpu = ARM_CPU(object_new(typename)); + if (!s->cpu) { + error_setg(errp, "Unknown CPU model %s", s->cpu_model); + return; + } + + object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + /* Note that we must realize the NVIC after the CPU */ + object_property_set_bool(OBJECT(&s->nvic), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + /* Alias the NVIC's input and output GPIOs as our own so the board + * code can wire them up. (We do this in realize because the + * NVIC doesn't create the input GPIO array until realize.) + */ + qdev_pass_gpios(DEVICE(&s->nvic), dev, NULL); + qdev_pass_gpios(DEVICE(&s->nvic), dev, "SYSRESETREQ"); + + /* Wire the NVIC up to the CPU */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->nvic), 0, + qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); + s->cpu->env.nvic = &s->nvic; + + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + Object *obj = OBJECT(&s->bitband[i]); + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); + + object_property_set_int(obj, bitband_input_addr[i], "base", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + object_property_set_bool(obj, true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + sysbus_mmio_map(sbd, 0, bitband_output_addr[i]); + } +} + +static Property armv7m_properties[] = { + DEFINE_PROP_STRING("cpu-model", ARMv7MState, cpu_model), + DEFINE_PROP_END_OF_LIST(), +}; + +static void armv7m_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = armv7m_realize; + dc->props = armv7m_properties; +} + +static const TypeInfo armv7m_info = { + .name = TYPE_ARMV7M, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ARMv7MState), + .instance_init = armv7m_instance_init, + .class_init = armv7m_class_init, +}; + static void armv7m_reset(void *opaque) { ARMCPU *cpu = opaque; @@ -XXX,XX +XXX,XX @@ static const TypeInfo bitband_info = { static void armv7m_register_types(void) { type_register_static(&bitband_info); + type_register_static(&armv7m_info); } type_init(armv7m_register_types) -- 2.7.4 Make the legacy armv7m_init() function use the newly QOMified armv7m object rather than doing everything by hand. We can return the armv7m object rather than the NVIC from armv7m_init() because its interface to the rest of the board (GPIOs, etc) is identical. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-5-git-send-email-peter.maydell@linaro.org --- hw/arm/armv7m.c | 49 ++++++++++++------------------------------------- 1 file changed, 12 insertions(+), 37 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void bitband_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } -static void armv7m_bitband_init(void) -{ - DeviceState *dev; - - dev = qdev_create(NULL, TYPE_BITBAND); - qdev_prop_set_uint32(dev, "base", 0x20000000); - qdev_init_nofail(dev); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x22000000); - - dev = qdev_create(NULL, TYPE_BITBAND); - qdev_prop_set_uint32(dev, "base", 0x40000000); - qdev_init_nofail(dev); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x42000000); -} - /* Board init. */ static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { @@ -XXX,XX +XXX,XX @@ static void armv7m_reset(void *opaque) /* Init CPU and memory for a v7-M based board. mem_size is in bytes. - Returns the NVIC array. */ + Returns the ARMv7M device. */ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, const char *kernel_filename, const char *cpu_model) { - ARMCPU *cpu; - CPUARMState *env; - DeviceState *nvic; + DeviceState *armv7m; if (cpu_model == NULL) { - cpu_model = "cortex-m3"; + cpu_model = "cortex-m3"; } - cpu = cpu_arm_init(cpu_model); - if (cpu == NULL) { - fprintf(stderr, "Unable to find CPU definition\n"); - exit(1); - } - env = &cpu->env; - - armv7m_bitband_init(); - - nvic = qdev_create(NULL, "armv7m_nvic"); - qdev_prop_set_uint32(nvic, "num-irq", num_irq); - env->nvic = nvic; - qdev_init_nofail(nvic); - sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, - qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); - armv7m_load_kernel(cpu, kernel_filename, mem_size); - return nvic; + + armv7m = qdev_create(NULL, "armv7m"); + qdev_prop_set_uint32(armv7m, "num-irq", num_irq); + qdev_prop_set_string(armv7m, "cpu-model", cpu_model); + /* This will exit with an error if the user passed us a bad cpu_model */ + qdev_init_nofail(armv7m); + + armv7m_load_kernel(ARM_CPU(first_cpu), kernel_filename, mem_size); + return armv7m; } void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) -- 2.7.4 Make the ARMv7M object take a memory region link which it uses to wire up the bitband rather than having them always put themselves in the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-6-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 10 ++++++++++ hw/arm/armv7m.c | 23 ++++++++++++++++++++++- 2 files changed, 32 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * + Named GPIO output SYSRESETREQ: signalled for guest AIRCR.SYSRESETREQ * + Property "cpu-model": CPU model to instantiate * + Property "num-irq": number of external IRQ lines + * + Property "memory": MemoryRegion defining the physical address space + * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal + * devices will be automatically layered on top of this view.) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { BitBandState bitband[ARMV7M_NUM_BITBANDS]; ARMCPU *cpu; + /* MemoryRegion we pass to the CPU, with our devices layered on + * top of the ones the board provides in board_memory. + */ + MemoryRegion container; + /* Properties */ char *cpu_model; + /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ + MemoryRegion *board_memory; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ #include "elf.h" #include "sysemu/qtest.h" #include "qemu/error-report.h" +#include "exec/address-spaces.h" /* Bitbanded IO. Each word corresponds to a single bit. */ @@ -XXX,XX +XXX,XX @@ static void armv7m_instance_init(Object *obj) /* Can't init the cpu here, we don't yet know which model to use */ + object_property_add_link(obj, "memory", + TYPE_MEMORY_REGION, + (Object **)&s->board_memory, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + memory_region_init(&s->container, obj, "armv7m-container", UINT64_MAX); + object_initialize(&s->nvic, sizeof(s->nvic), "armv7m_nvic"); qdev_set_parent_bus(DEVICE(&s->nvic), sysbus_get_default()); object_property_add_alias(obj, "num-irq", @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) const char *typename; CPUClass *cc; + if (!s->board_memory) { + error_setg(errp, "memory property was not set"); + return; + } + + memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); + cpustr = g_strsplit(s->cpu_model, ",", 2); oc = cpu_class_by_name(TYPE_ARM_CPU, cpustr[0]); @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } + object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory", + &error_abort); object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } - sysbus_mmio_map(sbd, 0, bitband_output_addr[i]); + memory_region_add_subregion(&s->container, bitband_output_addr[i], + sysbus_mmio_get_region(sbd, 0)); } } @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, armv7m = qdev_create(NULL, "armv7m"); qdev_prop_set_uint32(armv7m, "num-irq", num_irq); qdev_prop_set_string(armv7m, "cpu-model", cpu_model); + object_property_set_link(OBJECT(armv7m), OBJECT(get_system_memory()), + "memory", &error_abort); /* This will exit with an error if the user passed us a bad cpu_model */ qdev_init_nofail(armv7m); -- 2.7.4 Make the NVIC device expose a memory region for its users to map, rather than mapping itself into the system memory space on realize, and get the one user (the ARMv7M object) to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-7-git-send-email-peter.maydell@linaro.org --- hw/arm/armv7m.c | 7 ++++++- hw/intc/armv7m_nvic.c | 7 ++----- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_instance_init(Object *obj) static void armv7m_realize(DeviceState *dev, Error **errp) { ARMv7MState *s = ARMV7M(dev); + SysBusDevice *sbd; Error *err = NULL; int i; char **cpustr; @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) qdev_pass_gpios(DEVICE(&s->nvic), dev, "SYSRESETREQ"); /* Wire the NVIC up to the CPU */ - sysbus_connect_irq(SYS_BUS_DEVICE(&s->nvic), 0, + sbd = SYS_BUS_DEVICE(&s->nvic); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); s->cpu->env.nvic = &s->nvic; + memory_region_add_subregion(&s->container, 0xe000e000, + sysbus_mmio_get_region(sbd, 0)); + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { Object *obj = OBJECT(&s->bitband[i]); SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" -#include "exec/address-spaces.h" #include "qemu/log.h" #include "trace.h" @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) "nvic_sysregs", 0x1000); memory_region_add_subregion(&s->container, 0, &s->sysregmem); - /* Map the whole thing into system memory at the location required - * by the v7M architecture. - */ - memory_region_add_subregion(get_system_memory(), 0xe000e000, &s->container); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container); + s->systick.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); } -- 2.7.4 Instead of the bitband device doing a cpu_physical_memory_read/write, make it take a MemoryRegion which specifies where it should be accessing, and use address_space_read/write to access the corresponding AddressSpace. Since this entails pretty much a rewrite, convert away from old_mmio in the process. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-8-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 2 + hw/arm/armv7m.c | 166 +++++++++++++++++++++++------------------------- 2 files changed, 81 insertions(+), 87 deletions(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { SysBusDevice parent_obj; /*< public >*/ + AddressSpace *source_as; MemoryRegion iomem; uint32_t base; + MemoryRegion *source_memory; } BitBandState; #define TYPE_ARMV7M "armv7m" diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ /* Bitbanded IO. Each word corresponds to a single bit. */ /* Get the byte address of the real memory for a bitband access. */ -static inline uint32_t bitband_addr(void * opaque, uint32_t addr) +static inline hwaddr bitband_addr(BitBandState *s, hwaddr offset) { - uint32_t res; - - res = *(uint32_t *)opaque; - res |= (addr & 0x1ffffff) >> 5; - return res; - -} - -static uint32_t bitband_readb(void *opaque, hwaddr offset) -{ - uint8_t v; - cpu_physical_memory_read(bitband_addr(opaque, offset), &v, 1); - return (v & (1 << ((offset >> 2) & 7))) != 0; -} - -static void bitband_writeb(void *opaque, hwaddr offset, - uint32_t value) -{ - uint32_t addr; - uint8_t mask; - uint8_t v; - addr = bitband_addr(opaque, offset); - mask = (1 << ((offset >> 2) & 7)); - cpu_physical_memory_read(addr, &v, 1); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 1); -} - -static uint32_t bitband_readw(void *opaque, hwaddr offset) -{ - uint32_t addr; - uint16_t mask; - uint16_t v; - addr = bitband_addr(opaque, offset) & ~1; - mask = (1 << ((offset >> 2) & 15)); - mask = tswap16(mask); - cpu_physical_memory_read(addr, &v, 2); - return (v & mask) != 0; -} - -static void bitband_writew(void *opaque, hwaddr offset, - uint32_t value) -{ - uint32_t addr; - uint16_t mask; - uint16_t v; - addr = bitband_addr(opaque, offset) & ~1; - mask = (1 << ((offset >> 2) & 15)); - mask = tswap16(mask); - cpu_physical_memory_read(addr, &v, 2); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 2); + return s->base | (offset & 0x1ffffff) >> 5; } -static uint32_t bitband_readl(void *opaque, hwaddr offset) +static MemTxResult bitband_read(void *opaque, hwaddr offset, + uint64_t *data, unsigned size, MemTxAttrs attrs) { - uint32_t addr; - uint32_t mask; - uint32_t v; - addr = bitband_addr(opaque, offset) & ~3; - mask = (1 << ((offset >> 2) & 31)); - mask = tswap32(mask); - cpu_physical_memory_read(addr, &v, 4); - return (v & mask) != 0; + BitBandState *s = opaque; + uint8_t buf[4]; + MemTxResult res; + int bitpos, bit; + hwaddr addr; + + assert(size <= 4); + + /* Find address in underlying memory and round down to multiple of size */ + addr = bitband_addr(s, offset) & (-size); + res = address_space_read(s->source_as, addr, attrs, buf, size); + if (res) { + return res; + } + /* Bit position in the N bytes read... */ + bitpos = (offset >> 2) & ((size * 8) - 1); + /* ...converted to byte in buffer and bit in byte */ + bit = (buf[bitpos >> 3] >> (bitpos & 7)) & 1; + *data = bit; + return MEMTX_OK; } -static void bitband_writel(void *opaque, hwaddr offset, - uint32_t value) +static MemTxResult bitband_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size, MemTxAttrs attrs) { - uint32_t addr; - uint32_t mask; - uint32_t v; - addr = bitband_addr(opaque, offset) & ~3; - mask = (1 << ((offset >> 2) & 31)); - mask = tswap32(mask); - cpu_physical_memory_read(addr, &v, 4); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 4); + BitBandState *s = opaque; + uint8_t buf[4]; + MemTxResult res; + int bitpos, bit; + hwaddr addr; + + assert(size <= 4); + + /* Find address in underlying memory and round down to multiple of size */ + addr = bitband_addr(s, offset) & (-size); + res = address_space_read(s->source_as, addr, attrs, buf, size); + if (res) { + return res; + } + /* Bit position in the N bytes read... */ + bitpos = (offset >> 2) & ((size * 8) - 1); + /* ...converted to byte in buffer and bit in byte */ + bit = 1 << (bitpos & 7); + if (value & 1) { + buf[bitpos >> 3] |= bit; + } else { + buf[bitpos >> 3] &= ~bit; + } + return address_space_write(s->source_as, addr, attrs, buf, size); } static const MemoryRegionOps bitband_ops = { - .old_mmio = { - .read = { bitband_readb, bitband_readw, bitband_readl, }, - .write = { bitband_writeb, bitband_writew, bitband_writel, }, - }, + .read_with_attrs = bitband_read, + .write_with_attrs = bitband_write, .endianness = DEVICE_NATIVE_ENDIAN, + .impl.min_access_size = 1, + .impl.max_access_size = 4, + .valid.min_access_size = 1, + .valid.max_access_size = 4, }; static void bitband_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void bitband_init(Object *obj) BitBandState *s = BITBAND(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); - memory_region_init_io(&s->iomem, obj, &bitband_ops, &s->base, + object_property_add_link(obj, "source-memory", + TYPE_MEMORY_REGION, + (Object **)&s->source_memory, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + memory_region_init_io(&s->iomem, obj, &bitband_ops, s, "bitband", 0x02000000); sysbus_init_mmio(dev, &s->iomem); } +static void bitband_realize(DeviceState *dev, Error **errp) +{ + BitBandState *s = BITBAND(dev); + + if (!s->source_memory) { + error_setg(errp, "source-memory property not set"); + return; + } + + s->source_as = address_space_init_shareable(s->source_memory, + "bitband-source"); +} + /* Board init. */ static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } + object_property_set_link(obj, OBJECT(s->board_memory), + "source-memory", &error_abort); object_property_set_bool(obj, true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void bitband_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = bitband_realize; dc->props = bitband_properties; } -- 2.7.4 The NVIC is a core v7M device that exists for all v7M CPUs; put it under a CONFIG_ARM_V7M rather than hiding it under CONFIG_STELLARIS. (We'll use CONFIG_ARM_V7M for the SysTick device too when we split it out of the NVIC.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org --- hw/intc/Makefile.objs | 2 +- default-configs/arm-softmmu.mak | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Makefile.objs +++ b/hw/intc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_APIC) += apic.o apic_common.o obj-$(CONFIG_ARM_GIC_KVM) += arm_gic_kvm.o obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_kvm.o obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_its_kvm.o -obj-$(CONFIG_STELLARIS) += armv7m_nvic.o +obj-$(CONFIG_ARM_V7M) += armv7m_nvic.o obj-$(CONFIG_EXYNOS4) += exynos4210_gic.o exynos4210_combiner.o obj-$(CONFIG_GRLIB) += grlib_irqmp.o obj-$(CONFIG_IOAPIC) += ioapic.o diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ARM11MPCORE=y CONFIG_A9MPCORE=y CONFIG_A15MPCORE=y +CONFIG_ARM_V7M=y + CONFIG_ARM_GIC=y CONFIG_ARM_GIC_KVM=$(CONFIG_KVM) CONFIG_ARM_TIMER=y -- 2.7.4 The SysTick timer isn't really part of the NVIC proper; we just modelled it that way back when we couldn't easily have devices that only occupied a small chunk of a memory region. Split it out into its own device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1487604965-23220-10-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/arm/armv7m_nvic.h | 10 +- include/hw/timer/armv7m_systick.h | 34 ++++++ hw/intc/armv7m_nvic.c | 160 ++++++------------------- hw/timer/armv7m_systick.c | 240 ++++++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 6 + 6 files changed, 318 insertions(+), 133 deletions(-) create mode 100644 include/hw/timer/armv7m_systick.h create mode 100644 hw/timer/armv7m_systick.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_ARM_TIMER) += arm_timer.o common-obj-$(CONFIG_ARM_MPTIMER) += arm_mptimer.o +common-obj-$(CONFIG_ARM_V7M) += armv7m_systick.o common-obj-$(CONFIG_A9_GTIMER) += a9gtimer.o common-obj-$(CONFIG_CADENCE) += cadence_ttc.o common-obj-$(CONFIG_DS1338) += ds1338.o diff --git a/include/hw/arm/armv7m_nvic.h b/include/hw/arm/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m_nvic.h +++ b/include/hw/arm/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/sysbus.h" +#include "hw/timer/armv7m_systick.h" #define TYPE_NVIC "armv7m_nvic" @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { unsigned int vectpending; /* highest prio pending enabled exception */ int exception_prio; /* group prio of the highest prio active exception */ - struct { - uint32_t control; - uint32_t reload; - int64_t tick; - QEMUTimer *timer; - } systick; - MemoryRegion sysregmem; MemoryRegion container; uint32_t num_irq; qemu_irq excpout; qemu_irq sysresetreq; + + SysTickState systick; } NVICState; #endif diff --git a/include/hw/timer/armv7m_systick.h b/include/hw/timer/armv7m_systick.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/armv7m_systick.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M SysTick timer + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell + * + * This code is licensed under the GPL (version 2 or later). + */ + +#ifndef HW_TIMER_ARMV7M_SYSTICK_H +#define HW_TIMER_ARMV7M_SYSTICK_H + +#include "hw/sysbus.h" + +#define TYPE_SYSTICK "armv7m_systick" + +#define SYSTICK(obj) OBJECT_CHECK(SysTickState, (obj), TYPE_SYSTICK) + +typedef struct SysTickState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + uint32_t control; + uint32_t reload; + int64_t tick; + QEMUTimer *timer; + MemoryRegion iomem; + qemu_irq irq; +} SysTickState; + +#endif diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 }; -/* qemu timers run at 1GHz. We want something closer to 1MHz. */ -#define SYSTICK_SCALE 1000ULL - -#define SYSTICK_ENABLE (1 << 0) -#define SYSTICK_TICKINT (1 << 1) -#define SYSTICK_CLKSOURCE (1 << 2) -#define SYSTICK_COUNTFLAG (1 << 16) - -int system_clock_scale; - -/* Conversion factor from qemu timer to SysTick frequencies. */ -static inline int64_t systick_scale(NVICState *s) -{ - if (s->systick.control & SYSTICK_CLKSOURCE) - return system_clock_scale; - else - return 1000; -} - -static void systick_reload(NVICState *s, int reset) -{ - /* The Cortex-M3 Devices Generic User Guide says that "When the - * ENABLE bit is set to 1, the counter loads the RELOAD value from the - * SYST RVR register and then counts down". So, we need to check the - * ENABLE bit before reloading the value. - */ - if ((s->systick.control & SYSTICK_ENABLE) == 0) { - return; - } - - if (reset) - s->systick.tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - s->systick.tick += (s->systick.reload + 1) * systick_scale(s); - timer_mod(s->systick.timer, s->systick.tick); -} - -static void systick_timer_tick(void * opaque) -{ - NVICState *s = (NVICState *)opaque; - s->systick.control |= SYSTICK_COUNTFLAG; - if (s->systick.control & SYSTICK_TICKINT) { - /* Trigger the interrupt. */ - armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); - } - if (s->systick.reload == 0) { - s->systick.control &= ~SYSTICK_ENABLE; - } else { - systick_reload(s, 0); - } -} - -static void systick_reset(NVICState *s) -{ - s->systick.control = 0; - s->systick.reload = 0; - s->systick.tick = 0; - timer_del(s->systick.timer); -} - static int nvic_pending_prio(NVICState *s) { /* return the priority of the current pending interrupt, @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) switch (offset) { case 4: /* Interrupt Control Type. */ return ((s->num_irq - NVIC_FIRST_IRQ) / 32) - 1; - case 0x10: /* SysTick Control and Status. */ - val = s->systick.control; - s->systick.control &= ~SYSTICK_COUNTFLAG; - return val; - case 0x14: /* SysTick Reload Value. */ - return s->systick.reload; - case 0x18: /* SysTick Current Value. */ - { - int64_t t; - if ((s->systick.control & SYSTICK_ENABLE) == 0) - return 0; - t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (t >= s->systick.tick) - return 0; - val = ((s->systick.tick - (t + 1)) / systick_scale(s)) + 1; - /* The interrupt in triggered when the timer reaches zero. - However the counter is not reloaded until the next clock - tick. This is a hack to return zero during the first tick. */ - if (val > s->systick.reload) - val = 0; - return val; - } - case 0x1c: /* SysTick Calibration Value. */ - return 10000; case 0xd00: /* CPUID Base. */ return cpu->midr; case 0xd04: /* Interrupt Control State. */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) { ARMCPU *cpu = s->cpu; - uint32_t oldval; + switch (offset) { - case 0x10: /* SysTick Control and Status. */ - oldval = s->systick.control; - s->systick.control &= 0xfffffff8; - s->systick.control |= value & 7; - if ((oldval ^ value) & SYSTICK_ENABLE) { - int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (value & SYSTICK_ENABLE) { - if (s->systick.tick) { - s->systick.tick += now; - timer_mod(s->systick.timer, s->systick.tick); - } else { - systick_reload(s, 1); - } - } else { - timer_del(s->systick.timer); - s->systick.tick -= now; - if (s->systick.tick < 0) - s->systick.tick = 0; - } - } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { - /* This is a hack. Force the timer to be reloaded - when the reference clock is changed. */ - systick_reload(s, 1); - } - break; - case 0x14: /* SysTick Reload Value. */ - s->systick.reload = value; - break; - case 0x18: /* SysTick Current Value. Writes reload the timer. */ - systick_reload(s, 1); - s->systick.control &= ~SYSTICK_COUNTFLAG; - break; case 0xd04: /* Interrupt Control State. */ if (value & (1 << 31)) { armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_VecInfo = { static const VMStateDescription vmstate_nvic = { .name = "armv7m_nvic", - .version_id = 3, - .minimum_version_id = 3, + .version_id = 4, + .minimum_version_id = 4, .post_load = &nvic_post_load, .fields = (VMStateField[]) { VMSTATE_STRUCT_ARRAY(vectors, NVICState, NVIC_MAX_VECTORS, 1, vmstate_VecInfo, VecInfo), - VMSTATE_UINT32(systick.control, NVICState), - VMSTATE_UINT32(systick.reload, NVICState), - VMSTATE_INT64(systick.tick, NVICState), - VMSTATE_TIMER_PTR(systick.timer, NVICState), VMSTATE_UINT32(prigroup, NVICState), VMSTATE_END_OF_LIST() } @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->exception_prio = NVIC_NOEXC_PRIO; s->vectpending = 0; +} - systick_reset(s); +static void nvic_systick_trigger(void *opaque, int n, int level) +{ + NVICState *s = opaque; + + if (level) { + /* SysTick just asked us to pend its exception. + * (This is different from an external interrupt line's + * behaviour.) + */ + armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); + } } static void armv7m_nvic_realize(DeviceState *dev, Error **errp) { NVICState *s = NVIC(dev); + SysBusDevice *systick_sbd; + Error *err = NULL; s->cpu = ARM_CPU(qemu_get_cpu(0)); assert(s->cpu); @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) /* include space for internal exception vectors */ s->num_irq += NVIC_FIRST_IRQ; + object_property_set_bool(OBJECT(&s->systick), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + systick_sbd = SYS_BUS_DEVICE(&s->systick); + sysbus_connect_irq(systick_sbd, 0, + qdev_get_gpio_in_named(dev, "systick-trigger", 0)); + /* The NVIC and System Control Space (SCS) starts at 0xe000e000 * and looks like this: * 0x004 - ICTR - * 0x010 - 0x1c - systick + * 0x010 - 0xff - systick * 0x100..0x7ec - NVIC * 0x7f0..0xcff - Reserved * 0xd00..0xd3c - SCS registers @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) memory_region_init_io(&s->sysregmem, OBJECT(s), &nvic_sysreg_ops, s, "nvic_sysregs", 0x1000); memory_region_add_subregion(&s->container, 0, &s->sysregmem); + memory_region_add_subregion_overlap(&s->container, 0x10, + sysbus_mmio_get_region(systick_sbd, 0), + 1); sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container); - - s->systick.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); } static void armv7m_nvic_instance_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_instance_init(Object *obj) NVICState *nvic = NVIC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + object_initialize(&nvic->systick, sizeof(nvic->systick), TYPE_SYSTICK); + qdev_set_parent_bus(DEVICE(&nvic->systick), sysbus_get_default()); + sysbus_init_irq(sbd, &nvic->excpout); qdev_init_gpio_out_named(dev, &nvic->sysresetreq, "SYSRESETREQ", 1); + qdev_init_gpio_in_named(dev, nvic_systick_trigger, "systick-trigger", 1); } static void armv7m_nvic_class_init(ObjectClass *klass, void *data) diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/armv7m_systick.c @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M SysTick timer + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell + * + * This code is licensed under the GPL (version 2 or later). + */ + +#include "qemu/osdep.h" +#include "hw/timer/armv7m_systick.h" +#include "qemu-common.h" +#include "hw/sysbus.h" +#include "qemu/timer.h" +#include "qemu/log.h" +#include "trace.h" + +/* qemu timers run at 1GHz. We want something closer to 1MHz. */ +#define SYSTICK_SCALE 1000ULL + +#define SYSTICK_ENABLE (1 << 0) +#define SYSTICK_TICKINT (1 << 1) +#define SYSTICK_CLKSOURCE (1 << 2) +#define SYSTICK_COUNTFLAG (1 << 16) + +int system_clock_scale; + +/* Conversion factor from qemu timer to SysTick frequencies. */ +static inline int64_t systick_scale(SysTickState *s) +{ + if (s->control & SYSTICK_CLKSOURCE) { + return system_clock_scale; + } else { + return 1000; + } +} + +static void systick_reload(SysTickState *s, int reset) +{ + /* The Cortex-M3 Devices Generic User Guide says that "When the + * ENABLE bit is set to 1, the counter loads the RELOAD value from the + * SYST RVR register and then counts down". So, we need to check the + * ENABLE bit before reloading the value. + */ + trace_systick_reload(); + + if ((s->control & SYSTICK_ENABLE) == 0) { + return; + } + + if (reset) { + s->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + } + s->tick += (s->reload + 1) * systick_scale(s); + timer_mod(s->timer, s->tick); +} + +static void systick_timer_tick(void *opaque) +{ + SysTickState *s = (SysTickState *)opaque; + + trace_systick_timer_tick(); + + s->control |= SYSTICK_COUNTFLAG; + if (s->control & SYSTICK_TICKINT) { + /* Tell the NVIC to pend the SysTick exception */ + qemu_irq_pulse(s->irq); + } + if (s->reload == 0) { + s->control &= ~SYSTICK_ENABLE; + } else { + systick_reload(s, 0); + } +} + +static uint64_t systick_read(void *opaque, hwaddr addr, unsigned size) +{ + SysTickState *s = opaque; + uint32_t val; + + switch (addr) { + case 0x0: /* SysTick Control and Status. */ + val = s->control; + s->control &= ~SYSTICK_COUNTFLAG; + break; + case 0x4: /* SysTick Reload Value. */ + val = s->reload; + break; + case 0x8: /* SysTick Current Value. */ + { + int64_t t; + + if ((s->control & SYSTICK_ENABLE) == 0) { + val = 0; + break; + } + t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + if (t >= s->tick) { + val = 0; + break; + } + val = ((s->tick - (t + 1)) / systick_scale(s)) + 1; + /* The interrupt in triggered when the timer reaches zero. + However the counter is not reloaded until the next clock + tick. This is a hack to return zero during the first tick. */ + if (val > s->reload) { + val = 0; + } + break; + } + case 0xc: /* SysTick Calibration Value. */ + val = 10000; + break; + default: + val = 0; + qemu_log_mask(LOG_GUEST_ERROR, + "SysTick: Bad read offset 0x%" HWADDR_PRIx "\n", addr); + break; + } + + trace_systick_read(addr, val, size); + return val; +} + +static void systick_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + SysTickState *s = opaque; + + trace_systick_write(addr, value, size); + + switch (addr) { + case 0x0: /* SysTick Control and Status. */ + { + uint32_t oldval = s->control; + + s->control &= 0xfffffff8; + s->control |= value & 7; + if ((oldval ^ value) & SYSTICK_ENABLE) { + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + if (value & SYSTICK_ENABLE) { + if (s->tick) { + s->tick += now; + timer_mod(s->timer, s->tick); + } else { + systick_reload(s, 1); + } + } else { + timer_del(s->timer); + s->tick -= now; + if (s->tick < 0) { + s->tick = 0; + } + } + } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { + /* This is a hack. Force the timer to be reloaded + when the reference clock is changed. */ + systick_reload(s, 1); + } + break; + } + case 0x4: /* SysTick Reload Value. */ + s->reload = value; + break; + case 0x8: /* SysTick Current Value. Writes reload the timer. */ + systick_reload(s, 1); + s->control &= ~SYSTICK_COUNTFLAG; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "SysTick: Bad write offset 0x%" HWADDR_PRIx "\n", addr); + } +} + +static const MemoryRegionOps systick_ops = { + .read = systick_read, + .write = systick_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static void systick_reset(DeviceState *dev) +{ + SysTickState *s = SYSTICK(dev); + + s->control = 0; + s->reload = 0; + s->tick = 0; + timer_del(s->timer); +} + +static void systick_instance_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + SysTickState *s = SYSTICK(obj); + + memory_region_init_io(&s->iomem, obj, &systick_ops, s, "systick", 0xe0); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); + s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); +} + +static const VMStateDescription vmstate_systick = { + .name = "armv7m_systick", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(control, SysTickState), + VMSTATE_UINT32(reload, SysTickState), + VMSTATE_INT64(tick, SysTickState), + VMSTATE_TIMER_PTR(timer, SysTickState), + VMSTATE_END_OF_LIST() + } +}; + +static void systick_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_systick; + dc->reset = systick_reset; +} + +static const TypeInfo armv7m_systick_info = { + .name = TYPE_SYSTICK, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = systick_instance_init, + .instance_size = sizeof(SysTickState), + .class_init = systick_class_init, +}; + +static void armv7m_systick_register_types(void) +{ + type_register_static(&armv7m_systick_info); +} + +type_init(armv7m_systick_register_types) diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ aspeed_timer_ctrl_pulse_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" aspeed_timer_set_ctrl2(uint32_t value) "Value: 0x%" PRIx32 aspeed_timer_set_value(int timer, int reg, uint32_t value) "Timer %d register %d: 0x%" PRIx32 aspeed_timer_read(uint64_t offset, unsigned size, uint64_t value) "From 0x%" PRIx64 ": of size %u: 0x%" PRIx64 + +# hw/timer/armv7m_systick.c +systick_reload(void) "systick reload" +systick_timer_tick(void) "systick reload" +systick_read(uint64_t addr, uint32_t value, unsigned size) "systick read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" +systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" -- 2.7.4 Switch the stm32f205 SoC to create the armv7m object directly rather than via the armv7m_init() wrapper. This fits better with the SoC model's very QOMified design. In particular this means we can push loading the guest image out to the top level board code where it belongs, rather than the SoC object having a QOM property for the filename to load. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-11-git-send-email-peter.maydell@linaro.org --- include/hw/arm/stm32f205_soc.h | 4 +++- hw/arm/netduino2.c | 7 ++++--- hw/arm/stm32f205_soc.c | 16 +++++++++++++--- 3 files changed, 20 insertions(+), 7 deletions(-) diff --git a/include/hw/arm/stm32f205_soc.h b/include/hw/arm/stm32f205_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32f205_soc.h +++ b/include/hw/arm/stm32f205_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/adc/stm32f2xx_adc.h" #include "hw/or-irq.h" #include "hw/ssi/stm32f2xx_spi.h" +#include "hw/arm/armv7m.h" #define TYPE_STM32F205_SOC "stm32f205-soc" #define STM32F205_SOC(obj) \ @@ -XXX,XX +XXX,XX @@ typedef struct STM32F205State { SysBusDevice parent_obj; /*< public >*/ - char *kernel_filename; char *cpu_model; + ARMv7MState armv7m; + STM32F2XXSyscfgState syscfg; STM32F2XXUsartState usart[STM_NUM_USARTS]; STM32F2XXTimerState timer[STM_NUM_TIMERS]; diff --git a/hw/arm/netduino2.c b/hw/arm/netduino2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/netduino2.c +++ b/hw/arm/netduino2.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "qemu/error-report.h" #include "hw/arm/stm32f205_soc.h" +#include "hw/arm/arm.h" static void netduino2_init(MachineState *machine) { DeviceState *dev; dev = qdev_create(NULL, TYPE_STM32F205_SOC); - if (machine->kernel_filename) { - qdev_prop_set_string(dev, "kernel-filename", machine->kernel_filename); - } qdev_prop_set_string(dev, "cpu-model", "cortex-m3"); object_property_set_bool(OBJECT(dev), true, "realized", &error_fatal); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, + FLASH_SIZE); } static void netduino2_machine_init(MachineClass *mc) diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_initfn(Object *obj) STM32F205State *s = STM32F205_SOC(obj); int i; + object_initialize(&s->armv7m, sizeof(s->armv7m), TYPE_ARMV7M); + qdev_set_parent_bus(DEVICE(&s->armv7m), sysbus_get_default()); + object_initialize(&s->syscfg, sizeof(s->syscfg), TYPE_STM32F2XX_SYSCFG); qdev_set_parent_bus(DEVICE(&s->syscfg), sysbus_get_default()); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) vmstate_register_ram_global(sram); memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); - nvic = armv7m_init(get_system_memory(), FLASH_SIZE, 96, - s->kernel_filename, s->cpu_model); + nvic = DEVICE(&s->armv7m); + qdev_prop_set_uint32(nvic, "num-irq", 96); + qdev_prop_set_string(nvic, "cpu-model", s->cpu_model); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), + "memory", &error_abort); + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } /* System configuration controller */ dev = DEVICE(&s->syscfg); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } static Property stm32f205_soc_properties[] = { - DEFINE_PROP_STRING("kernel-filename", STM32F205State, kernel_filename), DEFINE_PROP_STRING("cpu-model", STM32F205State, cpu_model), DEFINE_PROP_END_OF_LIST(), }; -- 2.7.4 The local variable 'nvic' in stm32f205_soc_realize() no longer holds a direct pointer to the NVIC device; it is a pointer to the ARMv7M container object. Rename it 'armv7m' accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-12-git-send-email-peter.maydell@linaro.org --- hw/arm/stm32f205_soc.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_initfn(Object *obj) static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) { STM32F205State *s = STM32F205_SOC(dev_soc); - DeviceState *dev, *nvic; + DeviceState *dev, *armv7m; SysBusDevice *busdev; Error *err = NULL; int i; @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) vmstate_register_ram_global(sram); memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); - nvic = DEVICE(&s->armv7m); - qdev_prop_set_uint32(nvic, "num-irq", 96); - qdev_prop_set_string(nvic, "cpu-model", s->cpu_model); + armv7m = DEVICE(&s->armv7m); + qdev_prop_set_uint32(armv7m, "num-irq", 96); + qdev_prop_set_string(armv7m, "cpu-model", s->cpu_model); object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), "memory", &error_abort); object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, 0x40013800); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, 71)); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, 71)); /* Attach UART (uses USART registers) and USART controllers */ for (i = 0; i < STM_NUM_USARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, usart_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, usart_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, usart_irq[i])); } /* Timer 2 to 5 */ @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, timer_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, timer_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, timer_irq[i])); } /* ADC 1 to 3 */ @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) return; } qdev_connect_gpio_out(DEVICE(s->adc_irqs), 0, - qdev_get_gpio_in(nvic, ADC_IRQ)); + qdev_get_gpio_in(armv7m, ADC_IRQ)); for (i = 0; i < STM_NUM_ADCS; i++) { dev = DEVICE(&(s->adc[i])); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, spi_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, spi_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, spi_irq[i])); } } -- 2.7.4 From: Paolo Bonzini <pbonzini@redhat.com> The linux-headers/asm-arm/unistd.h file has been split in three sub-files, copy them along. However, building them requires setting ARCH rather than SRCARCH. SRCARCH defaults to $(ARCH) anyway; to avoid future occurrence of the same problem use ARCH for all architectures where SRCARCH=ARCH. Currently these are all except x86, sparc, sh and tile. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20170221122920.16245-2-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- scripts/update-linux-headers.sh | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh index XXXXXXX..XXXXXXX 100755 --- a/scripts/update-linux-headers.sh +++ b/scripts/update-linux-headers.sh @@ -XXX,XX +XXX,XX @@ for arch in $ARCHLIST; do continue fi - make -C "$linux" INSTALL_HDR_PATH="$tmpdir" SRCARCH=$arch headers_install + if [ "$arch" = x86 ]; then + arch_var=SRCARCH + else + arch_var=ARCH + fi + + make -C "$linux" INSTALL_HDR_PATH="$tmpdir" $arch_var=$arch headers_install rm -rf "$output/linux-headers/asm-$arch" mkdir -p "$output/linux-headers/asm-$arch" @@ -XXX,XX +XXX,XX @@ for arch in $ARCHLIST; do cp_portable "$tmpdir/include/asm/kvm_virtio.h" "$output/include/standard-headers/asm-s390/" cp_portable "$tmpdir/include/asm/virtio-ccw.h" "$output/include/standard-headers/asm-s390/" fi + if [ $arch = arm ]; then + cp "$tmpdir/include/asm/unistd-eabi.h" "$output/linux-headers/asm-arm/" + cp "$tmpdir/include/asm/unistd-oabi.h" "$output/linux-headers/asm-arm/" + cp "$tmpdir/include/asm/unistd-common.h" "$output/linux-headers/asm-arm/" + fi if [ $arch = x86 ]; then cp_portable "$tmpdir/include/asm/hyperv.h" "$output/include/standard-headers/asm-x86/" cp "$tmpdir/include/asm/unistd_32.h" "$output/linux-headers/asm-x86/" -- 2.7.4 From: Paolo Bonzini <pbonzini@redhat.com> virtio_mmio.h would be deleted; I am leaving it in though it was a mistake to add it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/standard-headers/asm-x86/hyperv.h | 8 + include/standard-headers/linux/input-event-codes.h | 2 +- include/standard-headers/linux/pci_regs.h | 25 ++ include/standard-headers/linux/virtio_ids.h | 1 + linux-headers/asm-arm/kvm.h | 15 + linux-headers/asm-arm/unistd-common.h | 357 ++++++++++++++++++ linux-headers/asm-arm/unistd-eabi.h | 5 + linux-headers/asm-arm/unistd-oabi.h | 17 + linux-headers/asm-arm/unistd.h | 419 +-------------------- linux-headers/asm-arm64/kvm.h | 13 + linux-headers/asm-powerpc/kvm.h | 27 ++ linux-headers/asm-powerpc/unistd.h | 1 + linux-headers/asm-x86/kvm_para.h | 13 +- linux-headers/linux/kvm.h | 24 +- linux-headers/linux/kvm_para.h | 2 + linux-headers/linux/userfaultfd.h | 67 +++- linux-headers/linux/vfio.h | 10 + 17 files changed, 577 insertions(+), 429 deletions(-) create mode 100644 linux-headers/asm-arm/unistd-common.h create mode 100644 linux-headers/asm-arm/unistd-eabi.h create mode 100644 linux-headers/asm-arm/unistd-oabi.h diff --git a/include/standard-headers/asm-x86/hyperv.h b/include/standard-headers/asm-x86/hyperv.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/asm-x86/hyperv.h +++ b/include/standard-headers/asm-x86/hyperv.h @@ -XXX,XX +XXX,XX @@ */ #define HV_X64_MSR_STAT_PAGES_AVAILABLE (1 << 8) +/* Crash MSR available */ +#define HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE (1 << 10) + /* * Feature identification: EBX indicates which flags were specified at * partition creation. The format is the same as the partition creation @@ -XXX,XX +XXX,XX @@ */ #define HV_X64_RELAXED_TIMING_RECOMMENDED (1 << 5) +/* + * Crash notification flag. + */ +#define HV_CRASH_CTL_CRASH_NOTIFY (1ULL << 63) + /* MSR used to identify the guest OS. */ #define HV_X64_MSR_GUEST_OS_ID 0x40000000 diff --git a/include/standard-headers/linux/input-event-codes.h b/include/standard-headers/linux/input-event-codes.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/input-event-codes.h +++ b/include/standard-headers/linux/input-event-codes.h @@ -XXX,XX +XXX,XX @@ * Control a data application associated with the currently viewed channel, * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.) */ -#define KEY_DATA 0x275 +#define KEY_DATA 0x277 #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -XXX,XX +XXX,XX @@ #define LINUX_PCI_REGS_H /* + * Conventional PCI and PCI-X Mode 1 devices have 256 bytes of + * configuration space. PCI-X Mode 2 and PCIe devices have 4096 bytes of + * configuration space. + */ +#define PCI_CFG_SPACE_SIZE 256 +#define PCI_CFG_SPACE_EXP_SIZE 4096 + +/* * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */ @@ -XXX,XX +XXX,XX @@ #define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ #define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ #define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */ +#define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */ #define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */ #define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PTM @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_DPC_STATUS 8 /* DPC Status */ #define PCI_EXP_DPC_STATUS_TRIGGER 0x01 /* Trigger Status */ #define PCI_EXP_DPC_STATUS_INTERRUPT 0x08 /* Interrupt Status */ +#define PCI_EXP_DPC_RP_BUSY 0x10 /* Root Port Busy */ #define PCI_EXP_DPC_SOURCE_ID 10 /* DPC Source Identifier */ @@ -XXX,XX +XXX,XX @@ #define PCI_PTM_CTRL_ENABLE 0x00000001 /* PTM enable */ #define PCI_PTM_CTRL_ROOT 0x00000002 /* Root select */ +/* L1 PM Substates */ +#define PCI_L1SS_CAP 4 /* capability register */ +#define PCI_L1SS_CAP_PCIPM_L1_2 1 /* PCI PM L1.2 Support */ +#define PCI_L1SS_CAP_PCIPM_L1_1 2 /* PCI PM L1.1 Support */ +#define PCI_L1SS_CAP_ASPM_L1_2 4 /* ASPM L1.2 Support */ +#define PCI_L1SS_CAP_ASPM_L1_1 8 /* ASPM L1.1 Support */ +#define PCI_L1SS_CAP_L1_PM_SS 16 /* L1 PM Substates Support */ +#define PCI_L1SS_CTL1 8 /* Control Register 1 */ +#define PCI_L1SS_CTL1_PCIPM_L1_2 1 /* PCI PM L1.2 Enable */ +#define PCI_L1SS_CTL1_PCIPM_L1_1 2 /* PCI PM L1.1 Support */ +#define PCI_L1SS_CTL1_ASPM_L1_2 4 /* ASPM L1.2 Support */ +#define PCI_L1SS_CTL1_ASPM_L1_1 8 /* ASPM L1.1 Support */ +#define PCI_L1SS_CTL1_L1SS_MASK 0x0000000F +#define PCI_L1SS_CTL2 0xC /* Control Register 2 */ + #endif /* LINUX_PCI_REGS_H */ diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/virtio_ids.h +++ b/include/standard-headers/linux/virtio_ids.h @@ -XXX,XX +XXX,XX @@ #define VIRTIO_ID_INPUT 18 /* virtio input */ #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ #define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ + #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/linux-headers/asm-arm/kvm.h b/linux-headers/asm-arm/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm/kvm.h +++ b/linux-headers/asm-arm/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_regs { /* Supported VGICv3 address types */ #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 +#define KVM_VGIC_ITS_ADDR_TYPE 4 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) +#define KVM_VGIC_V3_ITS_SIZE (2 * SZ_64K) #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ #define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */ @@ -XXX,XX +XXX,XX @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 #define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 +#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ + (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) #define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 #define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 +#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 +#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ + (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff +#define VGIC_LEVEL_INFO_LINE_LEVEL 0 + #define KVM_DEV_ARM_VGIC_CTRL_INIT 0 /* KVM_IRQ_LINE irq field index values */ diff --git a/linux-headers/asm-arm/unistd-common.h b/linux-headers/asm-arm/unistd-common.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-common.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_COMMON_H +#define _ASM_ARM_UNISTD_COMMON_H 1 + +#define __NR_restart_syscall (__NR_SYSCALL_BASE + 0) +#define __NR_exit (__NR_SYSCALL_BASE + 1) +#define __NR_fork (__NR_SYSCALL_BASE + 2) +#define __NR_read (__NR_SYSCALL_BASE + 3) +#define __NR_write (__NR_SYSCALL_BASE + 4) +#define __NR_open (__NR_SYSCALL_BASE + 5) +#define __NR_close (__NR_SYSCALL_BASE + 6) +#define __NR_creat (__NR_SYSCALL_BASE + 8) +#define __NR_link (__NR_SYSCALL_BASE + 9) +#define __NR_unlink (__NR_SYSCALL_BASE + 10) +#define __NR_execve (__NR_SYSCALL_BASE + 11) +#define __NR_chdir (__NR_SYSCALL_BASE + 12) +#define __NR_mknod (__NR_SYSCALL_BASE + 14) +#define __NR_chmod (__NR_SYSCALL_BASE + 15) +#define __NR_lchown (__NR_SYSCALL_BASE + 16) +#define __NR_lseek (__NR_SYSCALL_BASE + 19) +#define __NR_getpid (__NR_SYSCALL_BASE + 20) +#define __NR_mount (__NR_SYSCALL_BASE + 21) +#define __NR_setuid (__NR_SYSCALL_BASE + 23) +#define __NR_getuid (__NR_SYSCALL_BASE + 24) +#define __NR_ptrace (__NR_SYSCALL_BASE + 26) +#define __NR_pause (__NR_SYSCALL_BASE + 29) +#define __NR_access (__NR_SYSCALL_BASE + 33) +#define __NR_nice (__NR_SYSCALL_BASE + 34) +#define __NR_sync (__NR_SYSCALL_BASE + 36) +#define __NR_kill (__NR_SYSCALL_BASE + 37) +#define __NR_rename (__NR_SYSCALL_BASE + 38) +#define __NR_mkdir (__NR_SYSCALL_BASE + 39) +#define __NR_rmdir (__NR_SYSCALL_BASE + 40) +#define __NR_dup (__NR_SYSCALL_BASE + 41) +#define __NR_pipe (__NR_SYSCALL_BASE + 42) +#define __NR_times (__NR_SYSCALL_BASE + 43) +#define __NR_brk (__NR_SYSCALL_BASE + 45) +#define __NR_setgid (__NR_SYSCALL_BASE + 46) +#define __NR_getgid (__NR_SYSCALL_BASE + 47) +#define __NR_geteuid (__NR_SYSCALL_BASE + 49) +#define __NR_getegid (__NR_SYSCALL_BASE + 50) +#define __NR_acct (__NR_SYSCALL_BASE + 51) +#define __NR_umount2 (__NR_SYSCALL_BASE + 52) +#define __NR_ioctl (__NR_SYSCALL_BASE + 54) +#define __NR_fcntl (__NR_SYSCALL_BASE + 55) +#define __NR_setpgid (__NR_SYSCALL_BASE + 57) +#define __NR_umask (__NR_SYSCALL_BASE + 60) +#define __NR_chroot (__NR_SYSCALL_BASE + 61) +#define __NR_ustat (__NR_SYSCALL_BASE + 62) +#define __NR_dup2 (__NR_SYSCALL_BASE + 63) +#define __NR_getppid (__NR_SYSCALL_BASE + 64) +#define __NR_getpgrp (__NR_SYSCALL_BASE + 65) +#define __NR_setsid (__NR_SYSCALL_BASE + 66) +#define __NR_sigaction (__NR_SYSCALL_BASE + 67) +#define __NR_setreuid (__NR_SYSCALL_BASE + 70) +#define __NR_setregid (__NR_SYSCALL_BASE + 71) +#define __NR_sigsuspend (__NR_SYSCALL_BASE + 72) +#define __NR_sigpending (__NR_SYSCALL_BASE + 73) +#define __NR_sethostname (__NR_SYSCALL_BASE + 74) +#define __NR_setrlimit (__NR_SYSCALL_BASE + 75) +#define __NR_getrusage (__NR_SYSCALL_BASE + 77) +#define __NR_gettimeofday (__NR_SYSCALL_BASE + 78) +#define __NR_settimeofday (__NR_SYSCALL_BASE + 79) +#define __NR_getgroups (__NR_SYSCALL_BASE + 80) +#define __NR_setgroups (__NR_SYSCALL_BASE + 81) +#define __NR_symlink (__NR_SYSCALL_BASE + 83) +#define __NR_readlink (__NR_SYSCALL_BASE + 85) +#define __NR_uselib (__NR_SYSCALL_BASE + 86) +#define __NR_swapon (__NR_SYSCALL_BASE + 87) +#define __NR_reboot (__NR_SYSCALL_BASE + 88) +#define __NR_munmap (__NR_SYSCALL_BASE + 91) +#define __NR_truncate (__NR_SYSCALL_BASE + 92) +#define __NR_ftruncate (__NR_SYSCALL_BASE + 93) +#define __NR_fchmod (__NR_SYSCALL_BASE + 94) +#define __NR_fchown (__NR_SYSCALL_BASE + 95) +#define __NR_getpriority (__NR_SYSCALL_BASE + 96) +#define __NR_setpriority (__NR_SYSCALL_BASE + 97) +#define __NR_statfs (__NR_SYSCALL_BASE + 99) +#define __NR_fstatfs (__NR_SYSCALL_BASE + 100) +#define __NR_syslog (__NR_SYSCALL_BASE + 103) +#define __NR_setitimer (__NR_SYSCALL_BASE + 104) +#define __NR_getitimer (__NR_SYSCALL_BASE + 105) +#define __NR_stat (__NR_SYSCALL_BASE + 106) +#define __NR_lstat (__NR_SYSCALL_BASE + 107) +#define __NR_fstat (__NR_SYSCALL_BASE + 108) +#define __NR_vhangup (__NR_SYSCALL_BASE + 111) +#define __NR_wait4 (__NR_SYSCALL_BASE + 114) +#define __NR_swapoff (__NR_SYSCALL_BASE + 115) +#define __NR_sysinfo (__NR_SYSCALL_BASE + 116) +#define __NR_fsync (__NR_SYSCALL_BASE + 118) +#define __NR_sigreturn (__NR_SYSCALL_BASE + 119) +#define __NR_clone (__NR_SYSCALL_BASE + 120) +#define __NR_setdomainname (__NR_SYSCALL_BASE + 121) +#define __NR_uname (__NR_SYSCALL_BASE + 122) +#define __NR_adjtimex (__NR_SYSCALL_BASE + 124) +#define __NR_mprotect (__NR_SYSCALL_BASE + 125) +#define __NR_sigprocmask (__NR_SYSCALL_BASE + 126) +#define __NR_init_module (__NR_SYSCALL_BASE + 128) +#define __NR_delete_module (__NR_SYSCALL_BASE + 129) +#define __NR_quotactl (__NR_SYSCALL_BASE + 131) +#define __NR_getpgid (__NR_SYSCALL_BASE + 132) +#define __NR_fchdir (__NR_SYSCALL_BASE + 133) +#define __NR_bdflush (__NR_SYSCALL_BASE + 134) +#define __NR_sysfs (__NR_SYSCALL_BASE + 135) +#define __NR_personality (__NR_SYSCALL_BASE + 136) +#define __NR_setfsuid (__NR_SYSCALL_BASE + 138) +#define __NR_setfsgid (__NR_SYSCALL_BASE + 139) +#define __NR__llseek (__NR_SYSCALL_BASE + 140) +#define __NR_getdents (__NR_SYSCALL_BASE + 141) +#define __NR__newselect (__NR_SYSCALL_BASE + 142) +#define __NR_flock (__NR_SYSCALL_BASE + 143) +#define __NR_msync (__NR_SYSCALL_BASE + 144) +#define __NR_readv (__NR_SYSCALL_BASE + 145) +#define __NR_writev (__NR_SYSCALL_BASE + 146) +#define __NR_getsid (__NR_SYSCALL_BASE + 147) +#define __NR_fdatasync (__NR_SYSCALL_BASE + 148) +#define __NR__sysctl (__NR_SYSCALL_BASE + 149) +#define __NR_mlock (__NR_SYSCALL_BASE + 150) +#define __NR_munlock (__NR_SYSCALL_BASE + 151) +#define __NR_mlockall (__NR_SYSCALL_BASE + 152) +#define __NR_munlockall (__NR_SYSCALL_BASE + 153) +#define __NR_sched_setparam (__NR_SYSCALL_BASE + 154) +#define __NR_sched_getparam (__NR_SYSCALL_BASE + 155) +#define __NR_sched_setscheduler (__NR_SYSCALL_BASE + 156) +#define __NR_sched_getscheduler (__NR_SYSCALL_BASE + 157) +#define __NR_sched_yield (__NR_SYSCALL_BASE + 158) +#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE + 159) +#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE + 160) +#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE + 161) +#define __NR_nanosleep (__NR_SYSCALL_BASE + 162) +#define __NR_mremap (__NR_SYSCALL_BASE + 163) +#define __NR_setresuid (__NR_SYSCALL_BASE + 164) +#define __NR_getresuid (__NR_SYSCALL_BASE + 165) +#define __NR_poll (__NR_SYSCALL_BASE + 168) +#define __NR_nfsservctl (__NR_SYSCALL_BASE + 169) +#define __NR_setresgid (__NR_SYSCALL_BASE + 170) +#define __NR_getresgid (__NR_SYSCALL_BASE + 171) +#define __NR_prctl (__NR_SYSCALL_BASE + 172) +#define __NR_rt_sigreturn (__NR_SYSCALL_BASE + 173) +#define __NR_rt_sigaction (__NR_SYSCALL_BASE + 174) +#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE + 175) +#define __NR_rt_sigpending (__NR_SYSCALL_BASE + 176) +#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE + 177) +#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE + 178) +#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE + 179) +#define __NR_pread64 (__NR_SYSCALL_BASE + 180) +#define __NR_pwrite64 (__NR_SYSCALL_BASE + 181) +#define __NR_chown (__NR_SYSCALL_BASE + 182) +#define __NR_getcwd (__NR_SYSCALL_BASE + 183) +#define __NR_capget (__NR_SYSCALL_BASE + 184) +#define __NR_capset (__NR_SYSCALL_BASE + 185) +#define __NR_sigaltstack (__NR_SYSCALL_BASE + 186) +#define __NR_sendfile (__NR_SYSCALL_BASE + 187) +#define __NR_vfork (__NR_SYSCALL_BASE + 190) +#define __NR_ugetrlimit (__NR_SYSCALL_BASE + 191) +#define __NR_mmap2 (__NR_SYSCALL_BASE + 192) +#define __NR_truncate64 (__NR_SYSCALL_BASE + 193) +#define __NR_ftruncate64 (__NR_SYSCALL_BASE + 194) +#define __NR_stat64 (__NR_SYSCALL_BASE + 195) +#define __NR_lstat64 (__NR_SYSCALL_BASE + 196) +#define __NR_fstat64 (__NR_SYSCALL_BASE + 197) +#define __NR_lchown32 (__NR_SYSCALL_BASE + 198) +#define __NR_getuid32 (__NR_SYSCALL_BASE + 199) +#define __NR_getgid32 (__NR_SYSCALL_BASE + 200) +#define __NR_geteuid32 (__NR_SYSCALL_BASE + 201) +#define __NR_getegid32 (__NR_SYSCALL_BASE + 202) +#define __NR_setreuid32 (__NR_SYSCALL_BASE + 203) +#define __NR_setregid32 (__NR_SYSCALL_BASE + 204) +#define __NR_getgroups32 (__NR_SYSCALL_BASE + 205) +#define __NR_setgroups32 (__NR_SYSCALL_BASE + 206) +#define __NR_fchown32 (__NR_SYSCALL_BASE + 207) +#define __NR_setresuid32 (__NR_SYSCALL_BASE + 208) +#define __NR_getresuid32 (__NR_SYSCALL_BASE + 209) +#define __NR_setresgid32 (__NR_SYSCALL_BASE + 210) +#define __NR_getresgid32 (__NR_SYSCALL_BASE + 211) +#define __NR_chown32 (__NR_SYSCALL_BASE + 212) +#define __NR_setuid32 (__NR_SYSCALL_BASE + 213) +#define __NR_setgid32 (__NR_SYSCALL_BASE + 214) +#define __NR_setfsuid32 (__NR_SYSCALL_BASE + 215) +#define __NR_setfsgid32 (__NR_SYSCALL_BASE + 216) +#define __NR_getdents64 (__NR_SYSCALL_BASE + 217) +#define __NR_pivot_root (__NR_SYSCALL_BASE + 218) +#define __NR_mincore (__NR_SYSCALL_BASE + 219) +#define __NR_madvise (__NR_SYSCALL_BASE + 220) +#define __NR_fcntl64 (__NR_SYSCALL_BASE + 221) +#define __NR_gettid (__NR_SYSCALL_BASE + 224) +#define __NR_readahead (__NR_SYSCALL_BASE + 225) +#define __NR_setxattr (__NR_SYSCALL_BASE + 226) +#define __NR_lsetxattr (__NR_SYSCALL_BASE + 227) +#define __NR_fsetxattr (__NR_SYSCALL_BASE + 228) +#define __NR_getxattr (__NR_SYSCALL_BASE + 229) +#define __NR_lgetxattr (__NR_SYSCALL_BASE + 230) +#define __NR_fgetxattr (__NR_SYSCALL_BASE + 231) +#define __NR_listxattr (__NR_SYSCALL_BASE + 232) +#define __NR_llistxattr (__NR_SYSCALL_BASE + 233) +#define __NR_flistxattr (__NR_SYSCALL_BASE + 234) +#define __NR_removexattr (__NR_SYSCALL_BASE + 235) +#define __NR_lremovexattr (__NR_SYSCALL_BASE + 236) +#define __NR_fremovexattr (__NR_SYSCALL_BASE + 237) +#define __NR_tkill (__NR_SYSCALL_BASE + 238) +#define __NR_sendfile64 (__NR_SYSCALL_BASE + 239) +#define __NR_futex (__NR_SYSCALL_BASE + 240) +#define __NR_sched_setaffinity (__NR_SYSCALL_BASE + 241) +#define __NR_sched_getaffinity (__NR_SYSCALL_BASE + 242) +#define __NR_io_setup (__NR_SYSCALL_BASE + 243) +#define __NR_io_destroy (__NR_SYSCALL_BASE + 244) +#define __NR_io_getevents (__NR_SYSCALL_BASE + 245) +#define __NR_io_submit (__NR_SYSCALL_BASE + 246) +#define __NR_io_cancel (__NR_SYSCALL_BASE + 247) +#define __NR_exit_group (__NR_SYSCALL_BASE + 248) +#define __NR_lookup_dcookie (__NR_SYSCALL_BASE + 249) +#define __NR_epoll_create (__NR_SYSCALL_BASE + 250) +#define __NR_epoll_ctl (__NR_SYSCALL_BASE + 251) +#define __NR_epoll_wait (__NR_SYSCALL_BASE + 252) +#define __NR_remap_file_pages (__NR_SYSCALL_BASE + 253) +#define __NR_set_tid_address (__NR_SYSCALL_BASE + 256) +#define __NR_timer_create (__NR_SYSCALL_BASE + 257) +#define __NR_timer_settime (__NR_SYSCALL_BASE + 258) +#define __NR_timer_gettime (__NR_SYSCALL_BASE + 259) +#define __NR_timer_getoverrun (__NR_SYSCALL_BASE + 260) +#define __NR_timer_delete (__NR_SYSCALL_BASE + 261) +#define __NR_clock_settime (__NR_SYSCALL_BASE + 262) +#define __NR_clock_gettime (__NR_SYSCALL_BASE + 263) +#define __NR_clock_getres (__NR_SYSCALL_BASE + 264) +#define __NR_clock_nanosleep (__NR_SYSCALL_BASE + 265) +#define __NR_statfs64 (__NR_SYSCALL_BASE + 266) +#define __NR_fstatfs64 (__NR_SYSCALL_BASE + 267) +#define __NR_tgkill (__NR_SYSCALL_BASE + 268) +#define __NR_utimes (__NR_SYSCALL_BASE + 269) +#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE + 270) +#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE + 271) +#define __NR_pciconfig_read (__NR_SYSCALL_BASE + 272) +#define __NR_pciconfig_write (__NR_SYSCALL_BASE + 273) +#define __NR_mq_open (__NR_SYSCALL_BASE + 274) +#define __NR_mq_unlink (__NR_SYSCALL_BASE + 275) +#define __NR_mq_timedsend (__NR_SYSCALL_BASE + 276) +#define __NR_mq_timedreceive (__NR_SYSCALL_BASE + 277) +#define __NR_mq_notify (__NR_SYSCALL_BASE + 278) +#define __NR_mq_getsetattr (__NR_SYSCALL_BASE + 279) +#define __NR_waitid (__NR_SYSCALL_BASE + 280) +#define __NR_socket (__NR_SYSCALL_BASE + 281) +#define __NR_bind (__NR_SYSCALL_BASE + 282) +#define __NR_connect (__NR_SYSCALL_BASE + 283) +#define __NR_listen (__NR_SYSCALL_BASE + 284) +#define __NR_accept (__NR_SYSCALL_BASE + 285) +#define __NR_getsockname (__NR_SYSCALL_BASE + 286) +#define __NR_getpeername (__NR_SYSCALL_BASE + 287) +#define __NR_socketpair (__NR_SYSCALL_BASE + 288) +#define __NR_send (__NR_SYSCALL_BASE + 289) +#define __NR_sendto (__NR_SYSCALL_BASE + 290) +#define __NR_recv (__NR_SYSCALL_BASE + 291) +#define __NR_recvfrom (__NR_SYSCALL_BASE + 292) +#define __NR_shutdown (__NR_SYSCALL_BASE + 293) +#define __NR_setsockopt (__NR_SYSCALL_BASE + 294) +#define __NR_getsockopt (__NR_SYSCALL_BASE + 295) +#define __NR_sendmsg (__NR_SYSCALL_BASE + 296) +#define __NR_recvmsg (__NR_SYSCALL_BASE + 297) +#define __NR_semop (__NR_SYSCALL_BASE + 298) +#define __NR_semget (__NR_SYSCALL_BASE + 299) +#define __NR_semctl (__NR_SYSCALL_BASE + 300) +#define __NR_msgsnd (__NR_SYSCALL_BASE + 301) +#define __NR_msgrcv (__NR_SYSCALL_BASE + 302) +#define __NR_msgget (__NR_SYSCALL_BASE + 303) +#define __NR_msgctl (__NR_SYSCALL_BASE + 304) +#define __NR_shmat (__NR_SYSCALL_BASE + 305) +#define __NR_shmdt (__NR_SYSCALL_BASE + 306) +#define __NR_shmget (__NR_SYSCALL_BASE + 307) +#define __NR_shmctl (__NR_SYSCALL_BASE + 308) +#define __NR_add_key (__NR_SYSCALL_BASE + 309) +#define __NR_request_key (__NR_SYSCALL_BASE + 310) +#define __NR_keyctl (__NR_SYSCALL_BASE + 311) +#define __NR_semtimedop (__NR_SYSCALL_BASE + 312) +#define __NR_vserver (__NR_SYSCALL_BASE + 313) +#define __NR_ioprio_set (__NR_SYSCALL_BASE + 314) +#define __NR_ioprio_get (__NR_SYSCALL_BASE + 315) +#define __NR_inotify_init (__NR_SYSCALL_BASE + 316) +#define __NR_inotify_add_watch (__NR_SYSCALL_BASE + 317) +#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE + 318) +#define __NR_mbind (__NR_SYSCALL_BASE + 319) +#define __NR_get_mempolicy (__NR_SYSCALL_BASE + 320) +#define __NR_set_mempolicy (__NR_SYSCALL_BASE + 321) +#define __NR_openat (__NR_SYSCALL_BASE + 322) +#define __NR_mkdirat (__NR_SYSCALL_BASE + 323) +#define __NR_mknodat (__NR_SYSCALL_BASE + 324) +#define __NR_fchownat (__NR_SYSCALL_BASE + 325) +#define __NR_futimesat (__NR_SYSCALL_BASE + 326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE + 327) +#define __NR_unlinkat (__NR_SYSCALL_BASE + 328) +#define __NR_renameat (__NR_SYSCALL_BASE + 329) +#define __NR_linkat (__NR_SYSCALL_BASE + 330) +#define __NR_symlinkat (__NR_SYSCALL_BASE + 331) +#define __NR_readlinkat (__NR_SYSCALL_BASE + 332) +#define __NR_fchmodat (__NR_SYSCALL_BASE + 333) +#define __NR_faccessat (__NR_SYSCALL_BASE + 334) +#define __NR_pselect6 (__NR_SYSCALL_BASE + 335) +#define __NR_ppoll (__NR_SYSCALL_BASE + 336) +#define __NR_unshare (__NR_SYSCALL_BASE + 337) +#define __NR_set_robust_list (__NR_SYSCALL_BASE + 338) +#define __NR_get_robust_list (__NR_SYSCALL_BASE + 339) +#define __NR_splice (__NR_SYSCALL_BASE + 340) +#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE + 341) +#define __NR_tee (__NR_SYSCALL_BASE + 342) +#define __NR_vmsplice (__NR_SYSCALL_BASE + 343) +#define __NR_move_pages (__NR_SYSCALL_BASE + 344) +#define __NR_getcpu (__NR_SYSCALL_BASE + 345) +#define __NR_epoll_pwait (__NR_SYSCALL_BASE + 346) +#define __NR_kexec_load (__NR_SYSCALL_BASE + 347) +#define __NR_utimensat (__NR_SYSCALL_BASE + 348) +#define __NR_signalfd (__NR_SYSCALL_BASE + 349) +#define __NR_timerfd_create (__NR_SYSCALL_BASE + 350) +#define __NR_eventfd (__NR_SYSCALL_BASE + 351) +#define __NR_fallocate (__NR_SYSCALL_BASE + 352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE + 353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE + 354) +#define __NR_signalfd4 (__NR_SYSCALL_BASE + 355) +#define __NR_eventfd2 (__NR_SYSCALL_BASE + 356) +#define __NR_epoll_create1 (__NR_SYSCALL_BASE + 357) +#define __NR_dup3 (__NR_SYSCALL_BASE + 358) +#define __NR_pipe2 (__NR_SYSCALL_BASE + 359) +#define __NR_inotify_init1 (__NR_SYSCALL_BASE + 360) +#define __NR_preadv (__NR_SYSCALL_BASE + 361) +#define __NR_pwritev (__NR_SYSCALL_BASE + 362) +#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE + 363) +#define __NR_perf_event_open (__NR_SYSCALL_BASE + 364) +#define __NR_recvmmsg (__NR_SYSCALL_BASE + 365) +#define __NR_accept4 (__NR_SYSCALL_BASE + 366) +#define __NR_fanotify_init (__NR_SYSCALL_BASE + 367) +#define __NR_fanotify_mark (__NR_SYSCALL_BASE + 368) +#define __NR_prlimit64 (__NR_SYSCALL_BASE + 369) +#define __NR_name_to_handle_at (__NR_SYSCALL_BASE + 370) +#define __NR_open_by_handle_at (__NR_SYSCALL_BASE + 371) +#define __NR_clock_adjtime (__NR_SYSCALL_BASE + 372) +#define __NR_syncfs (__NR_SYSCALL_BASE + 373) +#define __NR_sendmmsg (__NR_SYSCALL_BASE + 374) +#define __NR_setns (__NR_SYSCALL_BASE + 375) +#define __NR_process_vm_readv (__NR_SYSCALL_BASE + 376) +#define __NR_process_vm_writev (__NR_SYSCALL_BASE + 377) +#define __NR_kcmp (__NR_SYSCALL_BASE + 378) +#define __NR_finit_module (__NR_SYSCALL_BASE + 379) +#define __NR_sched_setattr (__NR_SYSCALL_BASE + 380) +#define __NR_sched_getattr (__NR_SYSCALL_BASE + 381) +#define __NR_renameat2 (__NR_SYSCALL_BASE + 382) +#define __NR_seccomp (__NR_SYSCALL_BASE + 383) +#define __NR_getrandom (__NR_SYSCALL_BASE + 384) +#define __NR_memfd_create (__NR_SYSCALL_BASE + 385) +#define __NR_bpf (__NR_SYSCALL_BASE + 386) +#define __NR_execveat (__NR_SYSCALL_BASE + 387) +#define __NR_userfaultfd (__NR_SYSCALL_BASE + 388) +#define __NR_membarrier (__NR_SYSCALL_BASE + 389) +#define __NR_mlock2 (__NR_SYSCALL_BASE + 390) +#define __NR_copy_file_range (__NR_SYSCALL_BASE + 391) +#define __NR_preadv2 (__NR_SYSCALL_BASE + 392) +#define __NR_pwritev2 (__NR_SYSCALL_BASE + 393) +#define __NR_pkey_mprotect (__NR_SYSCALL_BASE + 394) +#define __NR_pkey_alloc (__NR_SYSCALL_BASE + 395) +#define __NR_pkey_free (__NR_SYSCALL_BASE + 396) + +#endif /* _ASM_ARM_UNISTD_COMMON_H */ diff --git a/linux-headers/asm-arm/unistd-eabi.h b/linux-headers/asm-arm/unistd-eabi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-eabi.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_EABI_H +#define _ASM_ARM_UNISTD_EABI_H 1 + + +#endif /* _ASM_ARM_UNISTD_EABI_H */ diff --git a/linux-headers/asm-arm/unistd-oabi.h b/linux-headers/asm-arm/unistd-oabi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-oabi.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_OABI_H +#define _ASM_ARM_UNISTD_OABI_H 1 + +#define __NR_time (__NR_SYSCALL_BASE + 13) +#define __NR_umount (__NR_SYSCALL_BASE + 22) +#define __NR_stime (__NR_SYSCALL_BASE + 25) +#define __NR_alarm (__NR_SYSCALL_BASE + 27) +#define __NR_utime (__NR_SYSCALL_BASE + 30) +#define __NR_getrlimit (__NR_SYSCALL_BASE + 76) +#define __NR_select (__NR_SYSCALL_BASE + 82) +#define __NR_readdir (__NR_SYSCALL_BASE + 89) +#define __NR_mmap (__NR_SYSCALL_BASE + 90) +#define __NR_socketcall (__NR_SYSCALL_BASE + 102) +#define __NR_syscall (__NR_SYSCALL_BASE + 113) +#define __NR_ipc (__NR_SYSCALL_BASE + 117) + +#endif /* _ASM_ARM_UNISTD_OABI_H */ diff --git a/linux-headers/asm-arm/unistd.h b/linux-headers/asm-arm/unistd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm/unistd.h +++ b/linux-headers/asm-arm/unistd.h @@ -XXX,XX +XXX,XX @@ #if defined(__thumb__) || defined(__ARM_EABI__) #define __NR_SYSCALL_BASE 0 +#include <asm/unistd-eabi.h> #else #define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE +#include <asm/unistd-oabi.h> #endif -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) -#define __NR_exit (__NR_SYSCALL_BASE+ 1) -#define __NR_fork (__NR_SYSCALL_BASE+ 2) -#define __NR_read (__NR_SYSCALL_BASE+ 3) -#define __NR_write (__NR_SYSCALL_BASE+ 4) -#define __NR_open (__NR_SYSCALL_BASE+ 5) -#define __NR_close (__NR_SYSCALL_BASE+ 6) - /* 7 was sys_waitpid */ -#define __NR_creat (__NR_SYSCALL_BASE+ 8) -#define __NR_link (__NR_SYSCALL_BASE+ 9) -#define __NR_unlink (__NR_SYSCALL_BASE+ 10) -#define __NR_execve (__NR_SYSCALL_BASE+ 11) -#define __NR_chdir (__NR_SYSCALL_BASE+ 12) -#define __NR_time (__NR_SYSCALL_BASE+ 13) -#define __NR_mknod (__NR_SYSCALL_BASE+ 14) -#define __NR_chmod (__NR_SYSCALL_BASE+ 15) -#define __NR_lchown (__NR_SYSCALL_BASE+ 16) - /* 17 was sys_break */ - /* 18 was sys_stat */ -#define __NR_lseek (__NR_SYSCALL_BASE+ 19) -#define __NR_getpid (__NR_SYSCALL_BASE+ 20) -#define __NR_mount (__NR_SYSCALL_BASE+ 21) -#define __NR_umount (__NR_SYSCALL_BASE+ 22) -#define __NR_setuid (__NR_SYSCALL_BASE+ 23) -#define __NR_getuid (__NR_SYSCALL_BASE+ 24) -#define __NR_stime (__NR_SYSCALL_BASE+ 25) -#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) -#define __NR_alarm (__NR_SYSCALL_BASE+ 27) - /* 28 was sys_fstat */ -#define __NR_pause (__NR_SYSCALL_BASE+ 29) -#define __NR_utime (__NR_SYSCALL_BASE+ 30) - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access (__NR_SYSCALL_BASE+ 33) -#define __NR_nice (__NR_SYSCALL_BASE+ 34) - /* 35 was sys_ftime */ -#define __NR_sync (__NR_SYSCALL_BASE+ 36) -#define __NR_kill (__NR_SYSCALL_BASE+ 37) -#define __NR_rename (__NR_SYSCALL_BASE+ 38) -#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) -#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) -#define __NR_dup (__NR_SYSCALL_BASE+ 41) -#define __NR_pipe (__NR_SYSCALL_BASE+ 42) -#define __NR_times (__NR_SYSCALL_BASE+ 43) - /* 44 was sys_prof */ -#define __NR_brk (__NR_SYSCALL_BASE+ 45) -#define __NR_setgid (__NR_SYSCALL_BASE+ 46) -#define __NR_getgid (__NR_SYSCALL_BASE+ 47) - /* 48 was sys_signal */ -#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) -#define __NR_getegid (__NR_SYSCALL_BASE+ 50) -#define __NR_acct (__NR_SYSCALL_BASE+ 51) -#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) - /* 53 was sys_lock */ -#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) -#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) - /* 56 was sys_mpx */ -#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask (__NR_SYSCALL_BASE+ 60) -#define __NR_chroot (__NR_SYSCALL_BASE+ 61) -#define __NR_ustat (__NR_SYSCALL_BASE+ 62) -#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) -#define __NR_getppid (__NR_SYSCALL_BASE+ 64) -#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) -#define __NR_setsid (__NR_SYSCALL_BASE+ 66) -#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) - /* 68 was sys_sgetmask */ - /* 69 was sys_ssetmask */ -#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) -#define __NR_setregid (__NR_SYSCALL_BASE+ 71) -#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) -#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) -#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) -#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) -#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ -#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) -#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) -#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) -#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) -#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) -#define __NR_select (__NR_SYSCALL_BASE+ 82) -#define __NR_symlink (__NR_SYSCALL_BASE+ 83) - /* 84 was sys_lstat */ -#define __NR_readlink (__NR_SYSCALL_BASE+ 85) -#define __NR_uselib (__NR_SYSCALL_BASE+ 86) -#define __NR_swapon (__NR_SYSCALL_BASE+ 87) -#define __NR_reboot (__NR_SYSCALL_BASE+ 88) -#define __NR_readdir (__NR_SYSCALL_BASE+ 89) -#define __NR_mmap (__NR_SYSCALL_BASE+ 90) -#define __NR_munmap (__NR_SYSCALL_BASE+ 91) -#define __NR_truncate (__NR_SYSCALL_BASE+ 92) -#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) -#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) -#define __NR_fchown (__NR_SYSCALL_BASE+ 95) -#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) -#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) - /* 98 was sys_profil */ -#define __NR_statfs (__NR_SYSCALL_BASE+ 99) -#define __NR_fstatfs (__NR_SYSCALL_BASE+100) - /* 101 was sys_ioperm */ -#define __NR_socketcall (__NR_SYSCALL_BASE+102) -#define __NR_syslog (__NR_SYSCALL_BASE+103) -#define __NR_setitimer (__NR_SYSCALL_BASE+104) -#define __NR_getitimer (__NR_SYSCALL_BASE+105) -#define __NR_stat (__NR_SYSCALL_BASE+106) -#define __NR_lstat (__NR_SYSCALL_BASE+107) -#define __NR_fstat (__NR_SYSCALL_BASE+108) - /* 109 was sys_uname */ - /* 110 was sys_iopl */ -#define __NR_vhangup (__NR_SYSCALL_BASE+111) - /* 112 was sys_idle */ -#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ -#define __NR_wait4 (__NR_SYSCALL_BASE+114) -#define __NR_swapoff (__NR_SYSCALL_BASE+115) -#define __NR_sysinfo (__NR_SYSCALL_BASE+116) -#define __NR_ipc (__NR_SYSCALL_BASE+117) -#define __NR_fsync (__NR_SYSCALL_BASE+118) -#define __NR_sigreturn (__NR_SYSCALL_BASE+119) -#define __NR_clone (__NR_SYSCALL_BASE+120) -#define __NR_setdomainname (__NR_SYSCALL_BASE+121) -#define __NR_uname (__NR_SYSCALL_BASE+122) - /* 123 was sys_modify_ldt */ -#define __NR_adjtimex (__NR_SYSCALL_BASE+124) -#define __NR_mprotect (__NR_SYSCALL_BASE+125) -#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) - /* 127 was sys_create_module */ -#define __NR_init_module (__NR_SYSCALL_BASE+128) -#define __NR_delete_module (__NR_SYSCALL_BASE+129) - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl (__NR_SYSCALL_BASE+131) -#define __NR_getpgid (__NR_SYSCALL_BASE+132) -#define __NR_fchdir (__NR_SYSCALL_BASE+133) -#define __NR_bdflush (__NR_SYSCALL_BASE+134) -#define __NR_sysfs (__NR_SYSCALL_BASE+135) -#define __NR_personality (__NR_SYSCALL_BASE+136) - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid (__NR_SYSCALL_BASE+138) -#define __NR_setfsgid (__NR_SYSCALL_BASE+139) -#define __NR__llseek (__NR_SYSCALL_BASE+140) -#define __NR_getdents (__NR_SYSCALL_BASE+141) -#define __NR__newselect (__NR_SYSCALL_BASE+142) -#define __NR_flock (__NR_SYSCALL_BASE+143) -#define __NR_msync (__NR_SYSCALL_BASE+144) -#define __NR_readv (__NR_SYSCALL_BASE+145) -#define __NR_writev (__NR_SYSCALL_BASE+146) -#define __NR_getsid (__NR_SYSCALL_BASE+147) -#define __NR_fdatasync (__NR_SYSCALL_BASE+148) -#define __NR__sysctl (__NR_SYSCALL_BASE+149) -#define __NR_mlock (__NR_SYSCALL_BASE+150) -#define __NR_munlock (__NR_SYSCALL_BASE+151) -#define __NR_mlockall (__NR_SYSCALL_BASE+152) -#define __NR_munlockall (__NR_SYSCALL_BASE+153) -#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) -#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) -#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) -#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) -#define __NR_sched_yield (__NR_SYSCALL_BASE+158) -#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) -#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) -#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) -#define __NR_nanosleep (__NR_SYSCALL_BASE+162) -#define __NR_mremap (__NR_SYSCALL_BASE+163) -#define __NR_setresuid (__NR_SYSCALL_BASE+164) -#define __NR_getresuid (__NR_SYSCALL_BASE+165) - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll (__NR_SYSCALL_BASE+168) -#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) -#define __NR_setresgid (__NR_SYSCALL_BASE+170) -#define __NR_getresgid (__NR_SYSCALL_BASE+171) -#define __NR_prctl (__NR_SYSCALL_BASE+172) -#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) -#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) -#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) -#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) -#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) -#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) -#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) -#define __NR_pread64 (__NR_SYSCALL_BASE+180) -#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) -#define __NR_chown (__NR_SYSCALL_BASE+182) -#define __NR_getcwd (__NR_SYSCALL_BASE+183) -#define __NR_capget (__NR_SYSCALL_BASE+184) -#define __NR_capset (__NR_SYSCALL_BASE+185) -#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) -#define __NR_sendfile (__NR_SYSCALL_BASE+187) - /* 188 reserved */ - /* 189 reserved */ -#define __NR_vfork (__NR_SYSCALL_BASE+190) -#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ -#define __NR_mmap2 (__NR_SYSCALL_BASE+192) -#define __NR_truncate64 (__NR_SYSCALL_BASE+193) -#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) -#define __NR_stat64 (__NR_SYSCALL_BASE+195) -#define __NR_lstat64 (__NR_SYSCALL_BASE+196) -#define __NR_fstat64 (__NR_SYSCALL_BASE+197) -#define __NR_lchown32 (__NR_SYSCALL_BASE+198) -#define __NR_getuid32 (__NR_SYSCALL_BASE+199) -#define __NR_getgid32 (__NR_SYSCALL_BASE+200) -#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) -#define __NR_getegid32 (__NR_SYSCALL_BASE+202) -#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) -#define __NR_setregid32 (__NR_SYSCALL_BASE+204) -#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) -#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) -#define __NR_fchown32 (__NR_SYSCALL_BASE+207) -#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) -#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) -#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) -#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) -#define __NR_chown32 (__NR_SYSCALL_BASE+212) -#define __NR_setuid32 (__NR_SYSCALL_BASE+213) -#define __NR_setgid32 (__NR_SYSCALL_BASE+214) -#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) -#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) -#define __NR_getdents64 (__NR_SYSCALL_BASE+217) -#define __NR_pivot_root (__NR_SYSCALL_BASE+218) -#define __NR_mincore (__NR_SYSCALL_BASE+219) -#define __NR_madvise (__NR_SYSCALL_BASE+220) -#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) - /* 222 for tux */ - /* 223 is unused */ -#define __NR_gettid (__NR_SYSCALL_BASE+224) -#define __NR_readahead (__NR_SYSCALL_BASE+225) -#define __NR_setxattr (__NR_SYSCALL_BASE+226) -#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) -#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) -#define __NR_getxattr (__NR_SYSCALL_BASE+229) -#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) -#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) -#define __NR_listxattr (__NR_SYSCALL_BASE+232) -#define __NR_llistxattr (__NR_SYSCALL_BASE+233) -#define __NR_flistxattr (__NR_SYSCALL_BASE+234) -#define __NR_removexattr (__NR_SYSCALL_BASE+235) -#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) -#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) -#define __NR_tkill (__NR_SYSCALL_BASE+238) -#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) -#define __NR_futex (__NR_SYSCALL_BASE+240) -#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) -#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) -#define __NR_io_setup (__NR_SYSCALL_BASE+243) -#define __NR_io_destroy (__NR_SYSCALL_BASE+244) -#define __NR_io_getevents (__NR_SYSCALL_BASE+245) -#define __NR_io_submit (__NR_SYSCALL_BASE+246) -#define __NR_io_cancel (__NR_SYSCALL_BASE+247) -#define __NR_exit_group (__NR_SYSCALL_BASE+248) -#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) -#define __NR_epoll_create (__NR_SYSCALL_BASE+250) -#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) -#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) -#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) - /* 254 for set_thread_area */ - /* 255 for get_thread_area */ -#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) -#define __NR_timer_create (__NR_SYSCALL_BASE+257) -#define __NR_timer_settime (__NR_SYSCALL_BASE+258) -#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) -#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) -#define __NR_timer_delete (__NR_SYSCALL_BASE+261) -#define __NR_clock_settime (__NR_SYSCALL_BASE+262) -#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) -#define __NR_clock_getres (__NR_SYSCALL_BASE+264) -#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) -#define __NR_statfs64 (__NR_SYSCALL_BASE+266) -#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) -#define __NR_tgkill (__NR_SYSCALL_BASE+268) -#define __NR_utimes (__NR_SYSCALL_BASE+269) -#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) -#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) -#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) -#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) -#define __NR_mq_open (__NR_SYSCALL_BASE+274) -#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) -#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) -#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) -#define __NR_mq_notify (__NR_SYSCALL_BASE+278) -#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) -#define __NR_waitid (__NR_SYSCALL_BASE+280) -#define __NR_socket (__NR_SYSCALL_BASE+281) -#define __NR_bind (__NR_SYSCALL_BASE+282) -#define __NR_connect (__NR_SYSCALL_BASE+283) -#define __NR_listen (__NR_SYSCALL_BASE+284) -#define __NR_accept (__NR_SYSCALL_BASE+285) -#define __NR_getsockname (__NR_SYSCALL_BASE+286) -#define __NR_getpeername (__NR_SYSCALL_BASE+287) -#define __NR_socketpair (__NR_SYSCALL_BASE+288) -#define __NR_send (__NR_SYSCALL_BASE+289) -#define __NR_sendto (__NR_SYSCALL_BASE+290) -#define __NR_recv (__NR_SYSCALL_BASE+291) -#define __NR_recvfrom (__NR_SYSCALL_BASE+292) -#define __NR_shutdown (__NR_SYSCALL_BASE+293) -#define __NR_setsockopt (__NR_SYSCALL_BASE+294) -#define __NR_getsockopt (__NR_SYSCALL_BASE+295) -#define __NR_sendmsg (__NR_SYSCALL_BASE+296) -#define __NR_recvmsg (__NR_SYSCALL_BASE+297) -#define __NR_semop (__NR_SYSCALL_BASE+298) -#define __NR_semget (__NR_SYSCALL_BASE+299) -#define __NR_semctl (__NR_SYSCALL_BASE+300) -#define __NR_msgsnd (__NR_SYSCALL_BASE+301) -#define __NR_msgrcv (__NR_SYSCALL_BASE+302) -#define __NR_msgget (__NR_SYSCALL_BASE+303) -#define __NR_msgctl (__NR_SYSCALL_BASE+304) -#define __NR_shmat (__NR_SYSCALL_BASE+305) -#define __NR_shmdt (__NR_SYSCALL_BASE+306) -#define __NR_shmget (__NR_SYSCALL_BASE+307) -#define __NR_shmctl (__NR_SYSCALL_BASE+308) -#define __NR_add_key (__NR_SYSCALL_BASE+309) -#define __NR_request_key (__NR_SYSCALL_BASE+310) -#define __NR_keyctl (__NR_SYSCALL_BASE+311) -#define __NR_semtimedop (__NR_SYSCALL_BASE+312) -#define __NR_vserver (__NR_SYSCALL_BASE+313) -#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) -#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) -#define __NR_inotify_init (__NR_SYSCALL_BASE+316) -#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) -#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) -#define __NR_mbind (__NR_SYSCALL_BASE+319) -#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) -#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) -#define __NR_openat (__NR_SYSCALL_BASE+322) -#define __NR_mkdirat (__NR_SYSCALL_BASE+323) -#define __NR_mknodat (__NR_SYSCALL_BASE+324) -#define __NR_fchownat (__NR_SYSCALL_BASE+325) -#define __NR_futimesat (__NR_SYSCALL_BASE+326) -#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) -#define __NR_unlinkat (__NR_SYSCALL_BASE+328) -#define __NR_renameat (__NR_SYSCALL_BASE+329) -#define __NR_linkat (__NR_SYSCALL_BASE+330) -#define __NR_symlinkat (__NR_SYSCALL_BASE+331) -#define __NR_readlinkat (__NR_SYSCALL_BASE+332) -#define __NR_fchmodat (__NR_SYSCALL_BASE+333) -#define __NR_faccessat (__NR_SYSCALL_BASE+334) -#define __NR_pselect6 (__NR_SYSCALL_BASE+335) -#define __NR_ppoll (__NR_SYSCALL_BASE+336) -#define __NR_unshare (__NR_SYSCALL_BASE+337) -#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) -#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) -#define __NR_splice (__NR_SYSCALL_BASE+340) -#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) +#include <asm/unistd-common.h> #define __NR_sync_file_range2 __NR_arm_sync_file_range -#define __NR_tee (__NR_SYSCALL_BASE+342) -#define __NR_vmsplice (__NR_SYSCALL_BASE+343) -#define __NR_move_pages (__NR_SYSCALL_BASE+344) -#define __NR_getcpu (__NR_SYSCALL_BASE+345) -#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346) -#define __NR_kexec_load (__NR_SYSCALL_BASE+347) -#define __NR_utimensat (__NR_SYSCALL_BASE+348) -#define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) -#define __NR_eventfd (__NR_SYSCALL_BASE+351) -#define __NR_fallocate (__NR_SYSCALL_BASE+352) -#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) -#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) -#define __NR_signalfd4 (__NR_SYSCALL_BASE+355) -#define __NR_eventfd2 (__NR_SYSCALL_BASE+356) -#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357) -#define __NR_dup3 (__NR_SYSCALL_BASE+358) -#define __NR_pipe2 (__NR_SYSCALL_BASE+359) -#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) -#define __NR_preadv (__NR_SYSCALL_BASE+361) -#define __NR_pwritev (__NR_SYSCALL_BASE+362) -#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363) -#define __NR_perf_event_open (__NR_SYSCALL_BASE+364) -#define __NR_recvmmsg (__NR_SYSCALL_BASE+365) -#define __NR_accept4 (__NR_SYSCALL_BASE+366) -#define __NR_fanotify_init (__NR_SYSCALL_BASE+367) -#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) -#define __NR_prlimit64 (__NR_SYSCALL_BASE+369) -#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) -#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) -#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) -#define __NR_syncfs (__NR_SYSCALL_BASE+373) -#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) -#define __NR_setns (__NR_SYSCALL_BASE+375) -#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) -#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) -#define __NR_kcmp (__NR_SYSCALL_BASE+378) -#define __NR_finit_module (__NR_SYSCALL_BASE+379) -#define __NR_sched_setattr (__NR_SYSCALL_BASE+380) -#define __NR_sched_getattr (__NR_SYSCALL_BASE+381) -#define __NR_renameat2 (__NR_SYSCALL_BASE+382) -#define __NR_seccomp (__NR_SYSCALL_BASE+383) -#define __NR_getrandom (__NR_SYSCALL_BASE+384) -#define __NR_memfd_create (__NR_SYSCALL_BASE+385) -#define __NR_bpf (__NR_SYSCALL_BASE+386) -#define __NR_execveat (__NR_SYSCALL_BASE+387) -#define __NR_userfaultfd (__NR_SYSCALL_BASE+388) -#define __NR_membarrier (__NR_SYSCALL_BASE+389) -#define __NR_mlock2 (__NR_SYSCALL_BASE+390) -#define __NR_copy_file_range (__NR_SYSCALL_BASE+391) -#define __NR_preadv2 (__NR_SYSCALL_BASE+392) -#define __NR_pwritev2 (__NR_SYSCALL_BASE+393) /* * The following SWIs are ARM private. @@ -XXX,XX +XXX,XX @@ #define __ARM_NR_usr32 (__ARM_NR_BASE+4) #define __ARM_NR_set_tls (__ARM_NR_BASE+5) -/* - * The following syscalls are obsolete and no longer available for EABI. - */ -#if defined(__ARM_EABI__) -#undef __NR_time -#undef __NR_umount -#undef __NR_stime -#undef __NR_alarm -#undef __NR_utime -#undef __NR_getrlimit -#undef __NR_select -#undef __NR_readdir -#undef __NR_mmap -#undef __NR_socketcall -#undef __NR_syscall -#undef __NR_ipc -#endif - #endif /* __ASM_ARM_UNISTD_H */ diff --git a/linux-headers/asm-arm64/kvm.h b/linux-headers/asm-arm64/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm64/kvm.h +++ b/linux-headers/asm-arm64/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 #define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 +#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ + (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) #define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 #define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 +#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 +#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ + (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff +#define VGIC_LEVEL_INFO_LINE_LEVEL 0 + #define KVM_DEV_ARM_VGIC_CTRL_INIT 0 /* Device Control API on vcpu fd */ diff --git a/linux-headers/asm-powerpc/kvm.h b/linux-headers/asm-powerpc/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/kvm.h +++ b/linux-headers/asm-powerpc/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { __u16 n_invalid; }; +/* For KVM_PPC_CONFIGURE_V3_MMU */ +struct kvm_ppc_mmuv3_cfg { + __u64 flags; + __u64 process_table; /* second doubleword of partition table entry */ +}; + +/* Flag values for KVM_PPC_CONFIGURE_V3_MMU */ +#define KVM_PPC_MMUV3_RADIX 1 /* 1 = radix mode, 0 = HPT */ +#define KVM_PPC_MMUV3_GTSE 2 /* global translation shootdown enb. */ + +/* For KVM_PPC_GET_RMMU_INFO */ +struct kvm_ppc_rmmu_info { + struct kvm_ppc_radix_geom { + __u8 page_shift; + __u8 level_bits[4]; + __u8 pad[3]; + } geometries[8]; + __u32 ap_encodings[8]; +}; + /* Per-vcpu XICS interrupt controller state */ #define KVM_REG_PPC_ICP_STATE (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8c) @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_REG_PPC_SPRG9 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xba) #define KVM_REG_PPC_DBSR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbb) +/* POWER9 registers */ +#define KVM_REG_PPC_TIDR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbc) +#define KVM_REG_PPC_PSSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd) + /* Transactional Memory checkpointed state: * This is all GPRs, all VSX regs and a subset of SPRs */ @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_REG_PPC_TM_VSCR (KVM_REG_PPC_TM | KVM_REG_SIZE_U32 | 0x67) #define KVM_REG_PPC_TM_DSCR (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x68) #define KVM_REG_PPC_TM_TAR (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x69) +#define KVM_REG_PPC_TM_XER (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x6a) /* PPC64 eXternal Interrupt Controller Specification */ #define KVM_DEV_XICS_GRP_SOURCES 1 /* 64-bit source attributes */ @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_XICS_LEVEL_SENSITIVE (1ULL << 40) #define KVM_XICS_MASKED (1ULL << 41) #define KVM_XICS_PENDING (1ULL << 42) +#define KVM_XICS_PRESENTED (1ULL << 43) +#define KVM_XICS_QUEUED (1ULL << 44) #endif /* __LINUX_KVM_POWERPC_H */ diff --git a/linux-headers/asm-powerpc/unistd.h b/linux-headers/asm-powerpc/unistd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/unistd.h +++ b/linux-headers/asm-powerpc/unistd.h @@ -XXX,XX +XXX,XX @@ #define __NR_copy_file_range 379 #define __NR_preadv2 380 #define __NR_pwritev2 381 +#define __NR_kexec_file_load 382 #endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/linux-headers/asm-x86/kvm_para.h b/linux-headers/asm-x86/kvm_para.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-x86/kvm_para.h +++ b/linux-headers/asm-x86/kvm_para.h @@ -XXX,XX +XXX,XX @@ struct kvm_steal_time { __u64 steal; __u32 version; __u32 flags; - __u32 pad[12]; + __u8 preempted; + __u8 u8_pad[3]; + __u32 pad[11]; +}; + +#define KVM_CLOCK_PAIRING_WALLCLOCK 0 +struct kvm_clock_pairing { + __s64 sec; + __s64 nsec; + __u64 tsc; + __u32 flags; + __u32 pad[9]; }; #define KVM_STEAL_ALIGNMENT_BITS 5 diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/kvm.h +++ b/linux-headers/linux/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_hyperv_exit { struct kvm_run { /* in */ __u8 request_interrupt_window; - __u8 padding1[7]; + __u8 immediate_exit; + __u8 padding1[6]; /* out */ __u32 exit_reason; @@ -XXX,XX +XXX,XX @@ struct kvm_enable_cap { }; /* for KVM_PPC_GET_PVINFO */ + +#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) + struct kvm_ppc_pvinfo { /* out */ __u32 flags; @@ -XXX,XX +XXX,XX @@ struct kvm_ppc_smmu_info { struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; }; -#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) +/* for KVM_PPC_RESIZE_HPT_{PREPARE,COMMIT} */ +struct kvm_ppc_resize_hpt { + __u64 flags; + __u32 shift; + __u32 pad; +}; #define KVMIO 0xAE @@ -XXX,XX +XXX,XX @@ struct kvm_ppc_smmu_info { #define KVM_CAP_S390_USER_INSTR0 130 #define KVM_CAP_MSI_DEVID 131 #define KVM_CAP_PPC_HTM 132 +#define KVM_CAP_SPAPR_RESIZE_HPT 133 +#define KVM_CAP_PPC_MMU_RADIX 134 +#define KVM_CAP_PPC_MMU_HASH_V3 135 +#define KVM_CAP_IMMEDIATE_EXIT 136 #ifdef KVM_CAP_IRQ_ROUTING @@ -XXX,XX +XXX,XX @@ struct kvm_s390_ucas_mapping { #define KVM_ARM_SET_DEVICE_ADDR _IOW(KVMIO, 0xab, struct kvm_arm_device_addr) /* Available with KVM_CAP_PPC_RTAS */ #define KVM_PPC_RTAS_DEFINE_TOKEN _IOW(KVMIO, 0xac, struct kvm_rtas_token_args) +/* Available with KVM_CAP_SPAPR_RESIZE_HPT */ +#define KVM_PPC_RESIZE_HPT_PREPARE _IOR(KVMIO, 0xad, struct kvm_ppc_resize_hpt) +#define KVM_PPC_RESIZE_HPT_COMMIT _IOR(KVMIO, 0xae, struct kvm_ppc_resize_hpt) +/* Available with KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 */ +#define KVM_PPC_CONFIGURE_V3_MMU _IOW(KVMIO, 0xaf, struct kvm_ppc_mmuv3_cfg) +/* Available with KVM_CAP_PPC_RADIX_MMU */ +#define KVM_PPC_GET_RMMU_INFO _IOW(KVMIO, 0xb0, struct kvm_ppc_rmmu_info) /* ioctl for vm fd */ #define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) diff --git a/linux-headers/linux/kvm_para.h b/linux-headers/linux/kvm_para.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/kvm_para.h +++ b/linux-headers/linux/kvm_para.h @@ -XXX,XX +XXX,XX @@ #define KVM_EFAULT EFAULT #define KVM_E2BIG E2BIG #define KVM_EPERM EPERM +#define KVM_EOPNOTSUPP 95 #define KVM_HC_VAPIC_POLL_IRQ 1 #define KVM_HC_MMU_OP 2 @@ -XXX,XX +XXX,XX @@ #define KVM_HC_MIPS_GET_CLOCK_FREQ 6 #define KVM_HC_MIPS_EXIT_VM 7 #define KVM_HC_MIPS_CONSOLE_OUTPUT 8 +#define KVM_HC_CLOCK_PAIRING 9 /* * hypercalls use architecture specific diff --git a/linux-headers/linux/userfaultfd.h b/linux-headers/linux/userfaultfd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/userfaultfd.h +++ b/linux-headers/linux/userfaultfd.h @@ -XXX,XX +XXX,XX @@ #include <linux/types.h> -#define UFFD_API ((__u64)0xAA) /* - * After implementing the respective features it will become: - * #define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | \ - * UFFD_FEATURE_EVENT_FORK) + * If the UFFDIO_API is upgraded someday, the UFFDIO_UNREGISTER and + * UFFDIO_WAKE ioctls should be defined as _IOW and not as _IOR. In + * userfaultfd.h we assumed the kernel was reading (instead _IOC_READ + * means the userland is reading). */ -#define UFFD_API_FEATURES (0) +#define UFFD_API ((__u64)0xAA) +#define UFFD_API_FEATURES (UFFD_FEATURE_EVENT_FORK | \ + UFFD_FEATURE_EVENT_REMAP | \ + UFFD_FEATURE_EVENT_MADVDONTNEED | \ + UFFD_FEATURE_MISSING_HUGETLBFS | \ + UFFD_FEATURE_MISSING_SHMEM) #define UFFD_API_IOCTLS \ ((__u64)1 << _UFFDIO_REGISTER | \ (__u64)1 << _UFFDIO_UNREGISTER | \ @@ -XXX,XX +XXX,XX @@ ((__u64)1 << _UFFDIO_WAKE | \ (__u64)1 << _UFFDIO_COPY | \ (__u64)1 << _UFFDIO_ZEROPAGE) +#define UFFD_API_RANGE_IOCTLS_BASIC \ + ((__u64)1 << _UFFDIO_WAKE | \ + (__u64)1 << _UFFDIO_COPY) /* * Valid ioctl command number range with this API is from 0x00 to @@ -XXX,XX +XXX,XX @@ struct uffd_msg { } pagefault; struct { + __u32 ufd; + } fork; + + struct { + __u64 from; + __u64 to; + __u64 len; + } remap; + + struct { + __u64 start; + __u64 end; + } madv_dn; + + struct { /* unused reserved fields */ __u64 reserved1; __u64 reserved2; @@ -XXX,XX +XXX,XX @@ struct uffd_msg { * Start at 0x12 and not at 0 to be more strict against bugs. */ #define UFFD_EVENT_PAGEFAULT 0x12 -#if 0 /* not available yet */ #define UFFD_EVENT_FORK 0x13 -#endif +#define UFFD_EVENT_REMAP 0x14 +#define UFFD_EVENT_MADVDONTNEED 0x15 /* flags for UFFD_EVENT_PAGEFAULT */ #define UFFD_PAGEFAULT_FLAG_WRITE (1<<0) /* If this was a write fault */ @@ -XXX,XX +XXX,XX @@ struct uffdio_api { * Note: UFFD_EVENT_PAGEFAULT and UFFD_PAGEFAULT_FLAG_WRITE * are to be considered implicitly always enabled in all kernels as * long as the uffdio_api.api requested matches UFFD_API. + * + * UFFD_FEATURE_MISSING_HUGETLBFS means an UFFDIO_REGISTER + * with UFFDIO_REGISTER_MODE_MISSING mode will succeed on + * hugetlbfs virtual memory ranges. Adding or not adding + * UFFD_FEATURE_MISSING_HUGETLBFS to uffdio_api.features has + * no real functional effect after UFFDIO_API returns, but + * it's only useful for an initial feature set probe at + * UFFDIO_API time. There are two ways to use it: + * + * 1) by adding UFFD_FEATURE_MISSING_HUGETLBFS to the + * uffdio_api.features before calling UFFDIO_API, an error + * will be returned by UFFDIO_API on a kernel without + * hugetlbfs missing support + * + * 2) the UFFD_FEATURE_MISSING_HUGETLBFS can not be added in + * uffdio_api.features and instead it will be set by the + * kernel in the uffdio_api.features if the kernel supports + * it, so userland can later check if the feature flag is + * present in uffdio_api.features after UFFDIO_API + * succeeded. + * + * UFFD_FEATURE_MISSING_SHMEM works the same as + * UFFD_FEATURE_MISSING_HUGETLBFS, but it applies to shmem + * (i.e. tmpfs and other shmem based APIs). */ -#if 0 /* not available yet */ #define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0) #define UFFD_FEATURE_EVENT_FORK (1<<1) -#endif +#define UFFD_FEATURE_EVENT_REMAP (1<<2) +#define UFFD_FEATURE_EVENT_MADVDONTNEED (1<<3) +#define UFFD_FEATURE_MISSING_HUGETLBFS (1<<4) +#define UFFD_FEATURE_MISSING_SHMEM (1<<5) __u64 features; __u64 ioctls; diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/vfio.h +++ b/linux-headers/linux/vfio.h @@ -XXX,XX +XXX,XX @@ struct vfio_device_info { }; #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) +/* + * Vendor driver using Mediated device framework should provide device_api + * attribute in supported type attribute groups. Device API string should be one + * of the following corresponding to device flags in vfio_device_info structure. + */ + +#define VFIO_DEVICE_API_PCI_STRING "vfio-pci" +#define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform" +#define VFIO_DEVICE_API_AMBA_STRING "vfio-amba" + /** * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, * struct vfio_region_info) -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> To Save and Restore ICC_SRE_EL1 register introduce vmstate subsection and load only if non-zero. Also initialize icc_sre_el1 with to 0x7 in pre_load function. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-3-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gicv3_common.h | 1 + hw/intc/arm_gicv3_common.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { uint8_t gicr_ipriorityr[GIC_INTERNAL]; /* CPU interface */ + uint64_t icc_sre_el1; uint64_t icc_ctlr_el1[2]; uint64_t icc_pmr_el1; uint64_t icc_bpr[3]; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu_virt = { } }; +static int icc_sre_el1_reg_pre_load(void *opaque) +{ + GICv3CPUState *cs = opaque; + + /* + * If the sre_el1 subsection is not transferred this + * means SRE_EL1 is 0x7 (which might not be the same as + * our reset value). + */ + cs->icc_sre_el1 = 0x7; + return 0; +} + +static bool icc_sre_el1_reg_needed(void *opaque) +{ + GICv3CPUState *cs = opaque; + + return cs->icc_sre_el1 != 7; +} + +const VMStateDescription vmstate_gicv3_cpu_sre_el1 = { + .name = "arm_gicv3_cpu/sre_el1", + .version_id = 1, + .minimum_version_id = 1, + .pre_load = icc_sre_el1_reg_pre_load, + .needed = icc_sre_el1_reg_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT64(icc_sre_el1, GICv3CPUState), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3_cpu = { .name = "arm_gicv3_cpu", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu = { .subsections = (const VMStateDescription * []) { &vmstate_gicv3_cpu_virt, NULL + }, + .subsections = (const VMStateDescription * []) { + &vmstate_gicv3_cpu_sre_el1, + NULL } }; -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> This actually implements pre_save and post_load methods for in-kernel vGICv3. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Message-id: 1487850673-26455-4-git-send-email-vijay.kilari@gmail.com [PMM: * use decimal, not 0bnnn * fixed typo in names of ICC_APR0R_EL1 and ICC_AP1R_EL1 * completely rearranged the get and put functions to read and write the state in a natural order, rather than mixing distributor and redistributor state together] Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> [Vijay: * Update macro KVM_VGIC_ATTR * Use 32 bit access for gicd and gicr * GICD_IROUTER, GICD_TYPER, GICR_PROPBASER and GICR_PENDBASER reg access are changed from 64-bit to 32-bit access * Add ICC_SRE_EL1 save and restore * Dropped translate_fn mechanism and coded functions to handle save and restore of edge_trigger and priority * Number of APnR register saved/restored based on number of priority bits supported] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 1 + hw/intc/arm_gicv3_kvm.c | 573 +++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 558 insertions(+), 16 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define ICC_CTLR_EL1_EOIMODE (1U << 1) #define ICC_CTLR_EL1_PMHE (1U << 6) #define ICC_CTLR_EL1_PRIBITS_SHIFT 8 +#define ICC_CTLR_EL1_PRIBITS_MASK (7U << ICC_CTLR_EL1_PRIBITS_SHIFT) #define ICC_CTLR_EL1_IDBITS_SHIFT 11 #define ICC_CTLR_EL1_SEIS (1U << 14) #define ICC_CTLR_EL1_A3V (1U << 15) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/sysbus.h" +#include "qemu/error-report.h" #include "sysemu/kvm.h" #include "kvm_arm.h" +#include "gicv3_internal.h" #include "vgic_common.h" #include "migration/migration.h" @@ -XXX,XX +XXX,XX @@ #define KVM_ARM_GICV3_GET_CLASS(obj) \ OBJECT_GET_CLASS(KVMARMGICv3Class, (obj), TYPE_KVM_ARM_GICV3) +#define KVM_DEV_ARM_VGIC_SYSREG(op0, op1, crn, crm, op2) \ + (ARM64_SYS_REG_SHIFT_MASK(op0, OP0) | \ + ARM64_SYS_REG_SHIFT_MASK(op1, OP1) | \ + ARM64_SYS_REG_SHIFT_MASK(crn, CRN) | \ + ARM64_SYS_REG_SHIFT_MASK(crm, CRM) | \ + ARM64_SYS_REG_SHIFT_MASK(op2, OP2)) + +#define ICC_PMR_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 4, 6, 0) +#define ICC_BPR0_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 8, 3) +#define ICC_AP0R_EL1(n) \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 8, 4 | n) +#define ICC_AP1R_EL1(n) \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 9, n) +#define ICC_BPR1_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 3) +#define ICC_CTLR_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 4) +#define ICC_SRE_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 5) +#define ICC_IGRPEN0_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 6) +#define ICC_IGRPEN1_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 7) + typedef struct KVMARMGICv3Class { ARMGICv3CommonClass parent_class; DeviceRealize parent_realize; @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_set_irq(void *opaque, int irq, int level) kvm_arm_gic_set_irq(s->num_irq, irq, level); } +#define KVM_VGIC_ATTR(reg, typer) \ + ((typer & KVM_DEV_ARM_VGIC_V3_MPIDR_MASK) | (reg)) + +static inline void kvm_gicd_access(GICv3State *s, int offset, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, + KVM_VGIC_ATTR(offset, 0), + val, write); +} + +static inline void kvm_gicr_access(GICv3State *s, int offset, int cpu, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS, + KVM_VGIC_ATTR(offset, s->cpu[cpu].gicr_typer), + val, write); +} + +static inline void kvm_gicc_access(GICv3State *s, uint64_t reg, int cpu, + uint64_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, + KVM_VGIC_ATTR(reg, s->cpu[cpu].gicr_typer), + val, write); +} + +static inline void kvm_gic_line_level_access(GICv3State *s, int irq, int cpu, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO, + KVM_VGIC_ATTR(irq, s->cpu[cpu].gicr_typer) | + (VGIC_LEVEL_INFO_LINE_LEVEL << + KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT), + val, write); +} + +/* Loop through each distributor IRQ related register; since bits + * corresponding to SPIs and PPIs are RAZ/WI when affinity routing + * is enabled, we skip those. + */ +#define for_each_dist_irq_reg(_irq, _max, _field_width) \ + for (_irq = GIC_INTERNAL; _irq < _max; _irq += (32 / _field_width)) + +static void kvm_dist_get_priority(GICv3State *s, uint32_t offset, uint8_t *bmp) +{ + uint32_t reg, *field; + int irq; + + field = (uint32_t *)bmp; + for_each_dist_irq_reg(irq, s->num_irq, 8) { + kvm_gicd_access(s, offset, &reg, false); + *field = reg; + offset += 4; + field++; + } +} + +static void kvm_dist_put_priority(GICv3State *s, uint32_t offset, uint8_t *bmp) +{ + uint32_t reg, *field; + int irq; + + field = (uint32_t *)bmp; + for_each_dist_irq_reg(irq, s->num_irq, 8) { + reg = *field; + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + field++; + } +} + +static void kvm_dist_get_edge_trigger(GICv3State *s, uint32_t offset, + uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 2) { + kvm_gicd_access(s, offset, &reg, false); + reg = half_unshuffle32(reg >> 1); + if (irq % 32 != 0) { + reg = (reg << 16); + } + *gic_bmp_ptr32(bmp, irq) |= reg; + offset += 4; + } +} + +static void kvm_dist_put_edge_trigger(GICv3State *s, uint32_t offset, + uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 2) { + reg = *gic_bmp_ptr32(bmp, irq); + if (irq % 32 != 0) { + reg = (reg & 0xffff0000) >> 16; + } else { + reg = reg & 0xffff; + } + reg = half_shuffle32(reg) << 1; + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + } +} + +static void kvm_gic_get_line_level_bmp(GICv3State *s, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + kvm_gic_line_level_access(s, irq, 0, &reg, false); + *gic_bmp_ptr32(bmp, irq) = reg; + } +} + +static void kvm_gic_put_line_level_bmp(GICv3State *s, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + reg = *gic_bmp_ptr32(bmp, irq); + kvm_gic_line_level_access(s, irq, 0, &reg, true); + } +} + +/* Read a bitmap register group from the kernel VGIC. */ +static void kvm_dist_getbmp(GICv3State *s, uint32_t offset, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + kvm_gicd_access(s, offset, &reg, false); + *gic_bmp_ptr32(bmp, irq) = reg; + offset += 4; + } +} + +static void kvm_dist_putbmp(GICv3State *s, uint32_t offset, + uint32_t clroffset, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + /* If this bitmap is a set/clear register pair, first write to the + * clear-reg to clear all bits before using the set-reg to write + * the 1 bits. + */ + if (clroffset != 0) { + reg = 0; + kvm_gicd_access(s, clroffset, &reg, true); + } + reg = *gic_bmp_ptr32(bmp, irq); + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + } +} + +static void kvm_arm_gicv3_check(GICv3State *s) +{ + uint32_t reg; + uint32_t num_irq; + + /* Sanity checking s->num_irq */ + kvm_gicd_access(s, GICD_TYPER, &reg, false); + num_irq = ((reg & 0x1f) + 1) * 32; + + if (num_irq < s->num_irq) { + error_report("Model requests %u IRQs, but kernel supports max %u", + s->num_irq, num_irq); + abort(); + } +} + static void kvm_arm_gicv3_put(GICv3State *s) { - /* TODO */ - DPRINTF("Cannot put kernel gic state, no kernel interface\n"); + uint32_t regl, regh, reg; + uint64_t reg64, redist_typer; + int ncpu, i; + + kvm_arm_gicv3_check(s); + + kvm_gicr_access(s, GICR_TYPER, 0, &regl, false); + kvm_gicr_access(s, GICR_TYPER + 4, 0, &regh, false); + redist_typer = ((uint64_t)regh << 32) | regl; + + reg = s->gicd_ctlr; + kvm_gicd_access(s, GICD_CTLR, &reg, true); + + if (redist_typer & GICR_TYPER_PLPIS) { + /* Set base addresses before LPIs are enabled by GICR_CTLR write */ + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + reg64 = c->gicr_propbaser; + regl = (uint32_t)reg64; + kvm_gicr_access(s, GICR_PROPBASER, ncpu, &regl, true); + regh = (uint32_t)(reg64 >> 32); + kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, true); + + reg64 = c->gicr_pendbaser; + if (!c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) { + /* Setting PTZ is advised if LPIs are disabled, to reduce + * GIC initialization time. + */ + reg64 |= GICR_PENDBASER_PTZ; + } + regl = (uint32_t)reg64; + kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, true); + regh = (uint32_t)(reg64 >> 32); + kvm_gicr_access(s, GICR_PENDBASER + 4, ncpu, &regh, true); + } + } + + /* Redistributor state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + reg = c->gicr_ctlr; + kvm_gicr_access(s, GICR_CTLR, ncpu, &reg, true); + + reg = c->gicr_statusr[GICV3_NS]; + kvm_gicr_access(s, GICR_STATUSR, ncpu, &reg, true); + + reg = c->gicr_waker; + kvm_gicr_access(s, GICR_WAKER, ncpu, &reg, true); + + reg = c->gicr_igroupr0; + kvm_gicr_access(s, GICR_IGROUPR0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICENABLER0, ncpu, &reg, true); + reg = c->gicr_ienabler0; + kvm_gicr_access(s, GICR_ISENABLER0, ncpu, &reg, true); + + /* Restore config before pending so we treat level/edge correctly */ + reg = half_shuffle32(c->edge_trigger >> 16) << 1; + kvm_gicr_access(s, GICR_ICFGR1, ncpu, &reg, true); + + reg = c->level; + kvm_gic_line_level_access(s, 0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICPENDR0, ncpu, &reg, true); + reg = c->gicr_ipendr0; + kvm_gicr_access(s, GICR_ISPENDR0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICACTIVER0, ncpu, &reg, true); + reg = c->gicr_iactiver0; + kvm_gicr_access(s, GICR_ISACTIVER0, ncpu, &reg, true); + + for (i = 0; i < GIC_INTERNAL; i += 4) { + reg = c->gicr_ipriorityr[i] | + (c->gicr_ipriorityr[i + 1] << 8) | + (c->gicr_ipriorityr[i + 2] << 16) | + (c->gicr_ipriorityr[i + 3] << 24); + kvm_gicr_access(s, GICR_IPRIORITYR + i, ncpu, &reg, true); + } + } + + /* Distributor state (shared between all CPUs */ + reg = s->gicd_statusr[GICV3_NS]; + kvm_gicd_access(s, GICD_STATUSR, &reg, true); + + /* s->enable bitmap -> GICD_ISENABLERn */ + kvm_dist_putbmp(s, GICD_ISENABLER, GICD_ICENABLER, s->enabled); + + /* s->group bitmap -> GICD_IGROUPRn */ + kvm_dist_putbmp(s, GICD_IGROUPR, 0, s->group); + + /* Restore targets before pending to ensure the pending state is set on + * the appropriate CPU interfaces in the kernel + */ + + /* s->gicd_irouter[irq] -> GICD_IROUTERn + * We can't use kvm_dist_put() here because the registers are 64-bit + */ + for (i = GIC_INTERNAL; i < s->num_irq; i++) { + uint32_t offset; + + offset = GICD_IROUTER + (sizeof(uint32_t) * i); + reg = (uint32_t)s->gicd_irouter[i]; + kvm_gicd_access(s, offset, &reg, true); + + offset = GICD_IROUTER + (sizeof(uint32_t) * i) + 4; + reg = (uint32_t)(s->gicd_irouter[i] >> 32); + kvm_gicd_access(s, offset, &reg, true); + } + + /* s->trigger bitmap -> GICD_ICFGRn + * (restore configuration registers before pending IRQs so we treat + * level/edge correctly) + */ + kvm_dist_put_edge_trigger(s, GICD_ICFGR, s->edge_trigger); + + /* s->level bitmap -> line_level */ + kvm_gic_put_line_level_bmp(s, s->level); + + /* s->pending bitmap -> GICD_ISPENDRn */ + kvm_dist_putbmp(s, GICD_ISPENDR, GICD_ICPENDR, s->pending); + + /* s->active bitmap -> GICD_ISACTIVERn */ + kvm_dist_putbmp(s, GICD_ISACTIVER, GICD_ICACTIVER, s->active); + + /* s->gicd_ipriority[] -> GICD_IPRIORITYRn */ + kvm_dist_put_priority(s, GICD_IPRIORITYR, s->gicd_ipriority); + + /* CPU Interface state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + int num_pri_bits; + + kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, true); + kvm_gicc_access(s, ICC_CTLR_EL1, ncpu, + &c->icc_ctlr_el1[GICV3_NS], true); + kvm_gicc_access(s, ICC_IGRPEN0_EL1, ncpu, + &c->icc_igrpen[GICV3_G0], true); + kvm_gicc_access(s, ICC_IGRPEN1_EL1, ncpu, + &c->icc_igrpen[GICV3_G1NS], true); + kvm_gicc_access(s, ICC_PMR_EL1, ncpu, &c->icc_pmr_el1, true); + kvm_gicc_access(s, ICC_BPR0_EL1, ncpu, &c->icc_bpr[GICV3_G0], true); + kvm_gicc_access(s, ICC_BPR1_EL1, ncpu, &c->icc_bpr[GICV3_G1NS], true); + + num_pri_bits = ((c->icc_ctlr_el1[GICV3_NS] & + ICC_CTLR_EL1_PRIBITS_MASK) >> + ICC_CTLR_EL1_PRIBITS_SHIFT) + 1; + + switch (num_pri_bits) { + case 7: + reg64 = c->icc_apr[GICV3_G0][3]; + kvm_gicc_access(s, ICC_AP0R_EL1(3), ncpu, &reg64, true); + reg64 = c->icc_apr[GICV3_G0][2]; + kvm_gicc_access(s, ICC_AP0R_EL1(2), ncpu, &reg64, true); + case 6: + reg64 = c->icc_apr[GICV3_G0][1]; + kvm_gicc_access(s, ICC_AP0R_EL1(1), ncpu, &reg64, true); + default: + reg64 = c->icc_apr[GICV3_G0][0]; + kvm_gicc_access(s, ICC_AP0R_EL1(0), ncpu, &reg64, true); + } + + switch (num_pri_bits) { + case 7: + reg64 = c->icc_apr[GICV3_G1NS][3]; + kvm_gicc_access(s, ICC_AP1R_EL1(3), ncpu, &reg64, true); + reg64 = c->icc_apr[GICV3_G1NS][2]; + kvm_gicc_access(s, ICC_AP1R_EL1(2), ncpu, &reg64, true); + case 6: + reg64 = c->icc_apr[GICV3_G1NS][1]; + kvm_gicc_access(s, ICC_AP1R_EL1(1), ncpu, &reg64, true); + default: + reg64 = c->icc_apr[GICV3_G1NS][0]; + kvm_gicc_access(s, ICC_AP1R_EL1(0), ncpu, &reg64, true); + } + } } static void kvm_arm_gicv3_get(GICv3State *s) { - /* TODO */ - DPRINTF("Cannot get kernel gic state, no kernel interface\n"); + uint32_t regl, regh, reg; + uint64_t reg64, redist_typer; + int ncpu, i; + + kvm_arm_gicv3_check(s); + + kvm_gicr_access(s, GICR_TYPER, 0, &regl, false); + kvm_gicr_access(s, GICR_TYPER + 4, 0, &regh, false); + redist_typer = ((uint64_t)regh << 32) | regl; + + kvm_gicd_access(s, GICD_CTLR, &reg, false); + s->gicd_ctlr = reg; + + /* Redistributor state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + kvm_gicr_access(s, GICR_CTLR, ncpu, &reg, false); + c->gicr_ctlr = reg; + + kvm_gicr_access(s, GICR_STATUSR, ncpu, &reg, false); + c->gicr_statusr[GICV3_NS] = reg; + + kvm_gicr_access(s, GICR_WAKER, ncpu, &reg, false); + c->gicr_waker = reg; + + kvm_gicr_access(s, GICR_IGROUPR0, ncpu, &reg, false); + c->gicr_igroupr0 = reg; + kvm_gicr_access(s, GICR_ISENABLER0, ncpu, &reg, false); + c->gicr_ienabler0 = reg; + kvm_gicr_access(s, GICR_ICFGR1, ncpu, &reg, false); + c->edge_trigger = half_unshuffle32(reg >> 1) << 16; + kvm_gic_line_level_access(s, 0, ncpu, &reg, false); + c->level = reg; + kvm_gicr_access(s, GICR_ISPENDR0, ncpu, &reg, false); + c->gicr_ipendr0 = reg; + kvm_gicr_access(s, GICR_ISACTIVER0, ncpu, &reg, false); + c->gicr_iactiver0 = reg; + + for (i = 0; i < GIC_INTERNAL; i += 4) { + kvm_gicr_access(s, GICR_IPRIORITYR + i, ncpu, &reg, false); + c->gicr_ipriorityr[i] = extract32(reg, 0, 8); + c->gicr_ipriorityr[i + 1] = extract32(reg, 8, 8); + c->gicr_ipriorityr[i + 2] = extract32(reg, 16, 8); + c->gicr_ipriorityr[i + 3] = extract32(reg, 24, 8); + } + } + + if (redist_typer & GICR_TYPER_PLPIS) { + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + kvm_gicr_access(s, GICR_PROPBASER, ncpu, &regl, false); + kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, false); + c->gicr_propbaser = ((uint64_t)regh << 32) | regl; + + kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, false); + kvm_gicr_access(s, GICR_PENDBASER + 4, ncpu, &regh, false); + c->gicr_pendbaser = ((uint64_t)regh << 32) | regl; + } + } + + /* Distributor state (shared between all CPUs */ + + kvm_gicd_access(s, GICD_STATUSR, &reg, false); + s->gicd_statusr[GICV3_NS] = reg; + + /* GICD_IGROUPRn -> s->group bitmap */ + kvm_dist_getbmp(s, GICD_IGROUPR, s->group); + + /* GICD_ISENABLERn -> s->enabled bitmap */ + kvm_dist_getbmp(s, GICD_ISENABLER, s->enabled); + + /* Line level of irq */ + kvm_gic_get_line_level_bmp(s, s->level); + /* GICD_ISPENDRn -> s->pending bitmap */ + kvm_dist_getbmp(s, GICD_ISPENDR, s->pending); + + /* GICD_ISACTIVERn -> s->active bitmap */ + kvm_dist_getbmp(s, GICD_ISACTIVER, s->active); + + /* GICD_ICFGRn -> s->trigger bitmap */ + kvm_dist_get_edge_trigger(s, GICD_ICFGR, s->edge_trigger); + + /* GICD_IPRIORITYRn -> s->gicd_ipriority[] */ + kvm_dist_get_priority(s, GICD_IPRIORITYR, s->gicd_ipriority); + + /* GICD_IROUTERn -> s->gicd_irouter[irq] */ + for (i = GIC_INTERNAL; i < s->num_irq; i++) { + uint32_t offset; + + offset = GICD_IROUTER + (sizeof(uint32_t) * i); + kvm_gicd_access(s, offset, &regl, false); + offset = GICD_IROUTER + (sizeof(uint32_t) * i) + 4; + kvm_gicd_access(s, offset, &regh, false); + s->gicd_irouter[i] = ((uint64_t)regh << 32) | regl; + } + + /***************************************************************** + * CPU Interface(s) State + */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + int num_pri_bits; + + kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, false); + kvm_gicc_access(s, ICC_CTLR_EL1, ncpu, + &c->icc_ctlr_el1[GICV3_NS], false); + kvm_gicc_access(s, ICC_IGRPEN0_EL1, ncpu, + &c->icc_igrpen[GICV3_G0], false); + kvm_gicc_access(s, ICC_IGRPEN1_EL1, ncpu, + &c->icc_igrpen[GICV3_G1NS], false); + kvm_gicc_access(s, ICC_PMR_EL1, ncpu, &c->icc_pmr_el1, false); + kvm_gicc_access(s, ICC_BPR0_EL1, ncpu, &c->icc_bpr[GICV3_G0], false); + kvm_gicc_access(s, ICC_BPR1_EL1, ncpu, &c->icc_bpr[GICV3_G1NS], false); + num_pri_bits = ((c->icc_ctlr_el1[GICV3_NS] & + ICC_CTLR_EL1_PRIBITS_MASK) >> + ICC_CTLR_EL1_PRIBITS_SHIFT) + 1; + + switch (num_pri_bits) { + case 7: + kvm_gicc_access(s, ICC_AP0R_EL1(3), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][3] = reg64; + kvm_gicc_access(s, ICC_AP0R_EL1(2), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][2] = reg64; + case 6: + kvm_gicc_access(s, ICC_AP0R_EL1(1), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][1] = reg64; + default: + kvm_gicc_access(s, ICC_AP0R_EL1(0), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][0] = reg64; + } + + switch (num_pri_bits) { + case 7: + kvm_gicc_access(s, ICC_AP1R_EL1(3), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][3] = reg64; + kvm_gicc_access(s, ICC_AP1R_EL1(2), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][2] = reg64; + case 6: + kvm_gicc_access(s, ICC_AP1R_EL1(1), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][1] = reg64; + default: + kvm_gicc_access(s, ICC_AP1R_EL1(0), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][0] = reg64; + } + } } static void kvm_arm_gicv3_reset(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset(DeviceState *dev) DPRINTF("Reset\n"); kgc->parent_reset(dev); + + if (s->migration_blocker) { + DPRINTF("Cannot put kernel gic state, no kernel interface\n"); + return; + } + kvm_arm_gicv3_put(s); } @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); - /* Block migration of a KVM GICv3 device: the API for saving and restoring - * the state in the kernel is not yet finalised in the kernel or - * implemented in QEMU. - */ - error_setg(&s->migration_blocker, "vGICv3 migration is not implemented"); - migrate_add_blocker(s->migration_blocker, &local_err); - if (local_err) { - error_propagate(errp, local_err); - error_free(s->migration_blocker); - return; - } - /* Try to create the device via the device control API */ s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, false); if (s->dev_fd < 0) { @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) kvm_irqchip_commit_routes(kvm_state); } + + if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, + GICD_CTLR)) { + error_setg(&s->migration_blocker, "This operating system kernel does " + "not support vGICv3 migration"); + migrate_add_blocker(s->migration_blocker, &local_err); + if (local_err) { + error_propagate(errp, local_err); + error_free(s->migration_blocker); + return; + } + } } static void kvm_arm_gicv3_class_init(ObjectClass *klass, void *data) -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Add gicv3state void pointer to CPUARMState struct to store GICv3CPUState. In case of usecase like CPU reset, we need to reset GICv3CPUState of the CPU. In such scenario, this pointer becomes handy. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-5-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 2 ++ target/arm/cpu.h | 2 ++ hw/intc/arm_gicv3_common.c | 2 ++ hw/intc/arm_gicv3_cpuif.c | 8 ++++++++ 4 files changed, 14 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ static inline void gicv3_cache_all_target_cpustates(GICv3State *s) } } +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s); + #endif /* QEMU_ARM_GICV3_INTERNAL_H */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { void *nvic; const struct arm_boot_info *boot_info; + /* Store GICv3CPUState to access from this struct */ + void *gicv3state; } CPUARMState; /** diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp) s->cpu[i].cpu = cpu; s->cpu[i].gic = s; + /* Store GICv3CPUState in CPUARMState gicv3state pointer */ + gicv3_set_gicv3state(cpu, &s->cpu[i]); /* Pre-construct the GICR_TYPER: * For our implementation: diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ #include "gicv3_internal.h" #include "cpu.h" +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + env->gicv3state = (void *)s; +}; + static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { /* Given the CPU, find the right GICv3CPUState struct. -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reset CPU interface registers of GICv3 when CPU is reset. For this, ARMCPRegInfo struct is registered with one ICC register whose resetfn is called when cpu is reset. All the ICC registers are reset under one single register reset function instead of calling resetfn for each ICC register. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-6-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_get(GICv3State *s) } } +static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu; + GICv3State *s; + GICv3CPUState *c; + + c = (GICv3CPUState *)env->gicv3state; + s = c->gic; + cpu = ARM_CPU(c->cpu); + + /* Initialize to actual HW supported configuration */ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, + KVM_VGIC_ATTR(ICC_CTLR_EL1, cpu->mp_affinity), + &c->icc_ctlr_el1[GICV3_NS], false); + + c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS]; + c->icc_pmr_el1 = 0; + c->icc_bpr[GICV3_G0] = GIC_MIN_BPR; + c->icc_bpr[GICV3_G1] = GIC_MIN_BPR; + c->icc_bpr[GICV3_G1NS] = GIC_MIN_BPR; + + c->icc_sre_el1 = 0x7; + memset(c->icc_apr, 0, sizeof(c->icc_apr)); + memset(c->icc_igrpen, 0, sizeof(c->icc_igrpen)); +} + static void kvm_arm_gicv3_reset(DeviceState *dev) { GICv3State *s = ARM_GICV3_COMMON(dev); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset(DeviceState *dev) kvm_arm_gicv3_put(s); } +/* + * CPU interface registers of GIC needs to be reset on CPU reset. + * For the calling arm_gicv3_icc_reset() on CPU reset, we register + * below ARMCPRegInfo. As we reset the whole cpu interface under single + * register reset, we define only one register of CPU interface instead + * of defining all the registers. + */ +static const ARMCPRegInfo gicv3_cpuif_reginfo[] = { + { .name = "ICC_CTLR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 4, + /* + * If ARM_CP_NOP is used, resetfn is not called, + * So ARM_CP_NO_RAW is appropriate type. + */ + .type = ARM_CP_NO_RAW, + .access = PL1_RW, + .readfn = arm_cp_read_zero, + .writefn = arm_cp_write_ignore, + /* + * We hang the whole cpu interface reset routine off here + * rather than parcelling it out into one little function + * per register + */ + .resetfn = arm_gicv3_icc_reset, + }, + REGINFO_SENTINEL +}; + static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) { GICv3State *s = KVM_ARM_GICV3(dev); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); + for (i = 0; i < s->num_cpu; i++) { + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i)); + + define_arm_cp_regs(cpu, gicv3_cpuif_reginfo); + } + /* Try to create the device via the device control API */ s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, false); if (s->dev_fd < 0) { -- 2.7.4 Instead of qdev_set_parent_bus() silently doing the wrong thing if it's handed a device that's already on a bus, have it remove the device from the old bus and add it to the new one. This is useful for the raspi2 sdcard. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1488293711-14195-2-git-send-email-peter.maydell@linaro.org --- hw/core/qdev.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void bus_add_child(BusState *bus, DeviceState *child) void qdev_set_parent_bus(DeviceState *dev, BusState *bus) { + bool replugging = dev->parent_bus != NULL; + + if (replugging) { + /* Keep a reference to the device while it's not plugged into + * any bus, to avoid it potentially evaporating when it is + * dereffed in bus_remove_child(). + */ + object_ref(OBJECT(dev)); + bus_remove_child(dev->parent_bus, dev); + object_unref(OBJECT(dev->parent_bus)); + } dev->parent_bus = bus; object_ref(OBJECT(bus)); bus_add_child(bus, dev); + if (replugging) { + object_unref(OBJECT(dev)); + } } /* Create a new device. This only initializes the device state -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> Provide a new function sdbus_reparent_card() in sd core for reparenting a card from a SDBus to another one. This function is required by the raspi platform, where the two SD controllers can be dynamically switched. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-3-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-3-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added a doc comment to the header file; changed to use new behaviour of qdev_set_parent_bus()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sd.h | 11 +++++++++++ hw/sd/core.c | 27 +++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sd.h +++ b/include/hw/sd/sd.h @@ -XXX,XX +XXX,XX @@ uint8_t sdbus_read_data(SDBus *sd); bool sdbus_data_ready(SDBus *sd); bool sdbus_get_inserted(SDBus *sd); bool sdbus_get_readonly(SDBus *sd); +/** + * sdbus_reparent_card: Reparent an SD card from one controller to another + * @from: controller bus to remove card from + * @to: controller bus to move card to + * + * Reparent an SD card, effectively unplugging it from one controller + * and inserting it into another. This is useful for SoCs like the + * bcm2835 which have two SD controllers and connect a single SD card + * to them, selected by the guest reprogramming GPIO line routing. + */ +void sdbus_reparent_card(SDBus *from, SDBus *to); /* Functions to be used by SD devices to report back to qdevified controllers */ void sdbus_set_inserted(SDBus *sd, bool inserted); diff --git a/hw/sd/core.c b/hw/sd/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/core.c +++ b/hw/sd/core.c @@ -XXX,XX +XXX,XX @@ void sdbus_set_readonly(SDBus *sdbus, bool readonly) } } +void sdbus_reparent_card(SDBus *from, SDBus *to) +{ + SDState *card = get_card(from); + SDCardClass *sc; + bool readonly; + + /* We directly reparent the card object rather than implementing this + * as a hotpluggable connection because we don't want to expose SD cards + * to users as being hotpluggable, and we can get away with it in this + * limited use case. This could perhaps be implemented more cleanly in + * future by adding support to the hotplug infrastructure for "device + * can be hotplugged only via code, not by user". + */ + + if (!card) { + return; + } + + sc = SD_CARD_GET_CLASS(card); + readonly = sc->get_readonly(card); + + sdbus_set_inserted(from, false); + qdev_set_parent_bus(DEVICE(card), &to->qbus); + sdbus_set_inserted(to, true); + sdbus_set_readonly(to, readonly); +} + static const TypeInfo sd_bus_info = { .name = TYPE_SD_BUS, .parent = TYPE_BUS, -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> This adds the BCM2835 GPIO controller. It currently implements: - The 54 GPIOs as outputs (qemu_irq) - The SD controller selection via alternate function of GPIOs 48-53 Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-4-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-4-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/Makefile.objs | 1 + include/hw/gpio/bcm2835_gpio.h | 39 +++++ hw/gpio/bcm2835_gpio.c | 353 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 393 insertions(+) create mode 100644 include/hw/gpio/bcm2835_gpio.h create mode 100644 hw/gpio/bcm2835_gpio.c diff --git a/hw/gpio/Makefile.objs b/hw/gpio/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Makefile.objs +++ b/hw/gpio/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_GPIO_KEY) += gpio_key.o obj-$(CONFIG_OMAP) += omap_gpio.o obj-$(CONFIG_IMX) += imx_gpio.o +obj-$(CONFIG_RASPI) += bcm2835_gpio.o diff --git a/include/hw/gpio/bcm2835_gpio.h b/include/hw/gpio/bcm2835_gpio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/gpio/bcm2835_gpio.h @@ -XXX,XX +XXX,XX @@ +/* + * Raspberry Pi (BCM2835) GPIO Controller + * + * Copyright (c) 2017 Antfield SAS + * + * Authors: + * Clement Deschamps <clement.deschamps@antfield.fr> + * Luc Michel <luc.michel@antfield.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef BCM2835_GPIO_H +#define BCM2835_GPIO_H + +#include "hw/sd/sd.h" + +typedef struct BCM2835GpioState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + /* SDBus selector */ + SDBus sdbus; + SDBus *sdbus_sdhci; + SDBus *sdbus_sdhost; + + uint8_t fsel[54]; + uint32_t lev0, lev1; + uint8_t sd_fsel; + qemu_irq out[54]; +} BCM2835GpioState; + +#define TYPE_BCM2835_GPIO "bcm2835_gpio" +#define BCM2835_GPIO(obj) \ + OBJECT_CHECK(BCM2835GpioState, (obj), TYPE_BCM2835_GPIO) + +#endif diff --git a/hw/gpio/bcm2835_gpio.c b/hw/gpio/bcm2835_gpio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/bcm2835_gpio.c @@ -XXX,XX +XXX,XX @@ +/* + * Raspberry Pi (BCM2835) GPIO Controller + * + * Copyright (c) 2017 Antfield SAS + * + * Authors: + * Clement Deschamps <clement.deschamps@antfield.fr> + * Luc Michel <luc.michel@antfield.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/timer.h" +#include "qapi/error.h" +#include "hw/sysbus.h" +#include "hw/sd/sd.h" +#include "hw/gpio/bcm2835_gpio.h" + +#define GPFSEL0 0x00 +#define GPFSEL1 0x04 +#define GPFSEL2 0x08 +#define GPFSEL3 0x0C +#define GPFSEL4 0x10 +#define GPFSEL5 0x14 +#define GPSET0 0x1C +#define GPSET1 0x20 +#define GPCLR0 0x28 +#define GPCLR1 0x2C +#define GPLEV0 0x34 +#define GPLEV1 0x38 +#define GPEDS0 0x40 +#define GPEDS1 0x44 +#define GPREN0 0x4C +#define GPREN1 0x50 +#define GPFEN0 0x58 +#define GPFEN1 0x5C +#define GPHEN0 0x64 +#define GPHEN1 0x68 +#define GPLEN0 0x70 +#define GPLEN1 0x74 +#define GPAREN0 0x7C +#define GPAREN1 0x80 +#define GPAFEN0 0x88 +#define GPAFEN1 0x8C +#define GPPUD 0x94 +#define GPPUDCLK0 0x98 +#define GPPUDCLK1 0x9C + +static uint32_t gpfsel_get(BCM2835GpioState *s, uint8_t reg) +{ + int i; + uint32_t value = 0; + for (i = 0; i < 10; i++) { + uint32_t index = 10 * reg + i; + if (index < sizeof(s->fsel)) { + value |= (s->fsel[index] & 0x7) << (3 * i); + } + } + return value; +} + +static void gpfsel_set(BCM2835GpioState *s, uint8_t reg, uint32_t value) +{ + int i; + for (i = 0; i < 10; i++) { + uint32_t index = 10 * reg + i; + if (index < sizeof(s->fsel)) { + int fsel = (value >> (3 * i)) & 0x7; + s->fsel[index] = fsel; + } + } + + /* SD controller selection (48-53) */ + if (s->sd_fsel != 0 + && (s->fsel[48] == 0) /* SD_CLK_R */ + && (s->fsel[49] == 0) /* SD_CMD_R */ + && (s->fsel[50] == 0) /* SD_DATA0_R */ + && (s->fsel[51] == 0) /* SD_DATA1_R */ + && (s->fsel[52] == 0) /* SD_DATA2_R */ + && (s->fsel[53] == 0) /* SD_DATA3_R */ + ) { + /* SDHCI controller selected */ + sdbus_reparent_card(s->sdbus_sdhost, s->sdbus_sdhci); + s->sd_fsel = 0; + } else if (s->sd_fsel != 4 + && (s->fsel[48] == 4) /* SD_CLK_R */ + && (s->fsel[49] == 4) /* SD_CMD_R */ + && (s->fsel[50] == 4) /* SD_DATA0_R */ + && (s->fsel[51] == 4) /* SD_DATA1_R */ + && (s->fsel[52] == 4) /* SD_DATA2_R */ + && (s->fsel[53] == 4) /* SD_DATA3_R */ + ) { + /* SDHost controller selected */ + sdbus_reparent_card(s->sdbus_sdhci, s->sdbus_sdhost); + s->sd_fsel = 4; + } +} + +static int gpfsel_is_out(BCM2835GpioState *s, int index) +{ + if (index >= 0 && index < 54) { + return s->fsel[index] == 1; + } + return 0; +} + +static void gpset(BCM2835GpioState *s, + uint32_t val, uint8_t start, uint8_t count, uint32_t *lev) +{ + uint32_t changes = val & ~*lev; + uint32_t cur = 1; + + int i; + for (i = 0; i < count; i++) { + if ((changes & cur) && (gpfsel_is_out(s, start + i))) { + qemu_set_irq(s->out[start + i], 1); + } + cur <<= 1; + } + + *lev |= val; +} + +static void gpclr(BCM2835GpioState *s, + uint32_t val, uint8_t start, uint8_t count, uint32_t *lev) +{ + uint32_t changes = val & *lev; + uint32_t cur = 1; + + int i; + for (i = 0; i < count; i++) { + if ((changes & cur) && (gpfsel_is_out(s, start + i))) { + qemu_set_irq(s->out[start + i], 0); + } + cur <<= 1; + } + + *lev &= ~val; +} + +static uint64_t bcm2835_gpio_read(void *opaque, hwaddr offset, + unsigned size) +{ + BCM2835GpioState *s = (BCM2835GpioState *)opaque; + + switch (offset) { + case GPFSEL0: + case GPFSEL1: + case GPFSEL2: + case GPFSEL3: + case GPFSEL4: + case GPFSEL5: + return gpfsel_get(s, offset / 4); + case GPSET0: + case GPSET1: + /* Write Only */ + return 0; + case GPCLR0: + case GPCLR1: + /* Write Only */ + return 0; + case GPLEV0: + return s->lev0; + case GPLEV1: + return s->lev1; + case GPEDS0: + case GPEDS1: + case GPREN0: + case GPREN1: + case GPFEN0: + case GPFEN1: + case GPHEN0: + case GPHEN1: + case GPLEN0: + case GPLEN1: + case GPAREN0: + case GPAREN1: + case GPAFEN0: + case GPAFEN1: + case GPPUD: + case GPPUDCLK0: + case GPPUDCLK1: + /* Not implemented */ + return 0; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); + break; + } + + return 0; +} + +static void bcm2835_gpio_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + BCM2835GpioState *s = (BCM2835GpioState *)opaque; + + switch (offset) { + case GPFSEL0: + case GPFSEL1: + case GPFSEL2: + case GPFSEL3: + case GPFSEL4: + case GPFSEL5: + gpfsel_set(s, offset / 4, value); + break; + case GPSET0: + gpset(s, value, 0, 32, &s->lev0); + break; + case GPSET1: + gpset(s, value, 32, 22, &s->lev1); + break; + case GPCLR0: + gpclr(s, value, 0, 32, &s->lev0); + break; + case GPCLR1: + gpclr(s, value, 32, 22, &s->lev1); + break; + case GPLEV0: + case GPLEV1: + /* Read Only */ + break; + case GPEDS0: + case GPEDS1: + case GPREN0: + case GPREN1: + case GPFEN0: + case GPFEN1: + case GPHEN0: + case GPHEN1: + case GPLEN0: + case GPLEN1: + case GPAREN0: + case GPAREN1: + case GPAFEN0: + case GPAFEN1: + case GPPUD: + case GPPUDCLK0: + case GPPUDCLK1: + /* Not implemented */ + break; + default: + goto err_out; + } + return; + +err_out: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); +} + +static void bcm2835_gpio_reset(DeviceState *dev) +{ + BCM2835GpioState *s = BCM2835_GPIO(dev); + + int i; + for (i = 0; i < 6; i++) { + gpfsel_set(s, i, 0); + } + + s->sd_fsel = 0; + + /* SDHCI is selected by default */ + sdbus_reparent_card(&s->sdbus, s->sdbus_sdhci); + + s->lev0 = 0; + s->lev1 = 0; +} + +static const MemoryRegionOps bcm2835_gpio_ops = { + .read = bcm2835_gpio_read, + .write = bcm2835_gpio_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription vmstate_bcm2835_gpio = { + .name = "bcm2835_gpio", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(fsel, BCM2835GpioState, 54), + VMSTATE_UINT32(lev0, BCM2835GpioState), + VMSTATE_UINT32(lev1, BCM2835GpioState), + VMSTATE_UINT8(sd_fsel, BCM2835GpioState), + VMSTATE_END_OF_LIST() + } +}; + +static void bcm2835_gpio_init(Object *obj) +{ + BCM2835GpioState *s = BCM2835_GPIO(obj); + DeviceState *dev = DEVICE(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), + TYPE_SD_BUS, DEVICE(s), "sd-bus"); + + memory_region_init_io(&s->iomem, obj, + &bcm2835_gpio_ops, s, "bcm2835_gpio", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); + qdev_init_gpio_out(dev, s->out, 54); +} + +static void bcm2835_gpio_realize(DeviceState *dev, Error **errp) +{ + BCM2835GpioState *s = BCM2835_GPIO(dev); + Object *obj; + Error *err = NULL; + + obj = object_property_get_link(OBJECT(dev), "sdbus-sdhci", &err); + if (obj == NULL) { + error_setg(errp, "%s: required sdhci link not found: %s", + __func__, error_get_pretty(err)); + return; + } + s->sdbus_sdhci = SD_BUS(obj); + + obj = object_property_get_link(OBJECT(dev), "sdbus-sdhost", &err); + if (obj == NULL) { + error_setg(errp, "%s: required sdhost link not found: %s", + __func__, error_get_pretty(err)); + return; + } + s->sdbus_sdhost = SD_BUS(obj); +} + +static void bcm2835_gpio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_bcm2835_gpio; + dc->realize = &bcm2835_gpio_realize; + dc->reset = &bcm2835_gpio_reset; +} + +static const TypeInfo bcm2835_gpio_info = { + .name = TYPE_BCM2835_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835GpioState), + .instance_init = bcm2835_gpio_init, + .class_init = bcm2835_gpio_class_init, +}; + +static void bcm2835_gpio_register_types(void) +{ + type_register_static(&bcm2835_gpio_info); +} + +type_init(bcm2835_gpio_register_types) -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> This adds the bcm2835_sdhost and bcm2835_gpio to the BCM2835 platform. For supporting the SD controller selection (alternate function of GPIOs 48-53), the bcm2835_gpio now exposes an sdbus. It also has a link to both the sdbus of sdhci and sdhost controllers, and the card is reparented from one bus to another when the alternate function of GPIOs 48-53 is modified. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-5-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-5-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 4 ++++ hw/arm/bcm2835_peripherals.c | 43 ++++++++++++++++++++++++++++++++++-- 2 files changed, 45 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_rng.h" #include "hw/misc/bcm2835_mbox.h" #include "hw/sd/sdhci.h" +#include "hw/sd/bcm2835_sdhost.h" +#include "hw/gpio/bcm2835_gpio.h" #define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals" #define BCM2835_PERIPHERALS(obj) \ @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { BCM2835RngState rng; BCM2835MboxState mboxes; SDHCIState sdhci; + BCM2835SDHostState sdhost; + BCM2835GpioState gpio; } BCM2835PeripheralState; #endif /* BCM2835_PERIPHERALS_H */ diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) object_property_add_child(obj, "sdhci", OBJECT(&s->sdhci), NULL); qdev_set_parent_bus(DEVICE(&s->sdhci), sysbus_get_default()); + /* SDHOST */ + object_initialize(&s->sdhost, sizeof(s->sdhost), TYPE_BCM2835_SDHOST); + object_property_add_child(obj, "sdhost", OBJECT(&s->sdhost), NULL); + qdev_set_parent_bus(DEVICE(&s->sdhost), sysbus_get_default()); + /* DMA Channels */ object_initialize(&s->dma, sizeof(s->dma), TYPE_BCM2835_DMA); object_property_add_child(obj, "dma", OBJECT(&s->dma), NULL); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) object_property_add_const_link(OBJECT(&s->dma), "dma-mr", OBJECT(&s->gpu_bus_mr), &error_abort); + + /* GPIO */ + object_initialize(&s->gpio, sizeof(s->gpio), TYPE_BCM2835_GPIO); + object_property_add_child(obj, "gpio", OBJECT(&s->gpio), NULL); + qdev_set_parent_bus(DEVICE(&s->gpio), sysbus_get_default()); + + object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhci", + OBJECT(&s->sdhci.sdbus), &error_abort); + object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost", + OBJECT(&s->sdhost.sdbus), &error_abort); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, INTERRUPT_ARASANSDIO)); - object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->sdhci), "sd-bus", - &err); + + /* SDHOST */ + object_property_set_bool(OBJECT(&s->sdhost), true, "realized", &err); if (err) { error_propagate(errp, err); return; } + memory_region_add_subregion(&s->peri_mr, MMCI0_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->sdhost), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhost), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_SDIO)); + /* DMA Channels */ object_property_set_bool(OBJECT(&s->dma), true, "realized", &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) BCM2835_IC_GPU_IRQ, INTERRUPT_DMA0 + n)); } + + /* GPIO */ + object_property_set_bool(OBJECT(&s->gpio), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, GPIO_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0)); + + object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus", + &err); + if (err) { + error_propagate(errp, err); + return; + } } static void bcm2835_peripherals_class_init(ObjectClass *oc, void *data) -- 2.7.4 Hi; here's the first target-arm pullreq for the 7.0 cycle. thanks -- PMM The following changes since commit 76b56fdfc9fa43ec6e5986aee33f108c6c6a511e: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2021-12-14 12:46:18 -0800) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20211215 for you to fetch changes up to aed176558806674d030a8305d989d4e6a5073359: tests/acpi: add expected blob for VIOT test on virt machine (2021-12-15 10:35:26 +0000) ---------------------------------------------------------------- target-arm queue: * ITS: error reporting cleanup * aspeed: improve documentation * Fix STM32F2XX USART data register readout * allow emulated GICv3 to be disabled in non-TCG builds * fix exception priority for singlestep, misaligned PC, bp, etc * Correct calculation of tlb range invalidate length * npcm7xx_emc: fix missing queue_flush * virt: Add VIOT ACPI table for virtio-iommu * target/i386: Use assert() to sanity-check b1 in SSE decode * Don't include qemu-common unnecessarily ---------------------------------------------------------------- Alex Bennée (1): hw/intc: clean-up error reporting for failed ITS cmd Jean-Philippe Brucker (8): hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu hw/arm/virt: Remove device tree restriction for virtio-iommu hw/arm/virt: Reject instantiation of multiple IOMMUs hw/arm/virt: Use object_property_set instead of qdev_prop_set tests/acpi: allow updates of VIOT expected data files tests/acpi: add test case for VIOT tests/acpi: add expected blobs for VIOT test on q35 machine tests/acpi: add expected blob for VIOT test on virt machine Joel Stanley (4): docs: aspeed: Add new boards docs: aspeed: Update OpenBMC image URL docs: aspeed: Give an example of booting a kernel docs: aspeed: ADC is now modelled Olivier Hériveaux (1): Fix STM32F2XX USART data register readout Patrick Venture (1): hw/net: npcm7xx_emc fix missing queue_flush Peter Maydell (6): target/i386: Use assert() to sanity-check b1 in SSE decode include/hw/i386: Don't include qemu-common.h in .h files target/hexagon/cpu.h: don't include qemu-common.h target/rx/cpu.h: Don't include qemu-common.h hw/arm: Don't include qemu-common.h unnecessarily target/arm: Correct calculation of tlb range invalidate length Philippe Mathieu-Daudé (2): hw/intc/arm_gicv3: Extract gicv3_set_gicv3state from arm_gicv3_cpuif.c hw/intc/arm_gicv3: Introduce CONFIG_ARM_GIC_TCG Kconfig selector Richard Henderson (10): target/arm: Hoist pc_next to a local variable in aarch64_tr_translate_insn target/arm: Hoist pc_next to a local variable in arm_tr_translate_insn target/arm: Hoist pc_next to a local variable in thumb_tr_translate_insn target/arm: Split arm_pre_translate_insn target/arm: Advance pc for arch single-step exception target/arm: Split compute_fsr_fsc out of arm_deliver_fault target/arm: Take an exception if PC is misaligned target/arm: Assert thumb pc is aligned target/arm: Suppress bp for exceptions with more priority tests/tcg: Add arm and aarch64 pc alignment tests docs/system/arm/aspeed.rst | 26 ++++++++++++---- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - target/arm/helper.h | 1 + target/arm/syndrome.h | 5 +++ target/hexagon/cpu.h | 1 - target/rx/cpu.h | 1 - hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt-acpi-build.c | 7 +++++ hw/arm/virt.c | 21 ++++++------- hw/char/stm32f2xx_usart.c | 3 +- hw/intc/arm_gicv3.c | 2 +- hw/intc/arm_gicv3_cpuif.c | 10 +----- hw/intc/arm_gicv3_cpuif_common.c | 22 +++++++++++++ hw/intc/arm_gicv3_its.c | 39 +++++++++++++++-------- hw/net/npcm7xx_emc.c | 18 +++++------ hw/virtio/virtio-iommu-pci.c | 12 ++------ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++------------ linux-user/hexagon/cpu_loop.c | 1 + target/arm/debug_helper.c | 23 ++++++++++++++ target/arm/gdbstub.c | 9 ++++-- target/arm/helper.c | 6 ++-- target/arm/machine.c | 10 ++++++ target/arm/tlb_helper.c | 63 ++++++++++++++++++++++++++++---------- target/arm/translate-a64.c | 23 ++++++++++++-- target/arm/translate.c | 58 ++++++++++++++++++++++++++--------- target/i386/tcg/translate.c | 12 ++------ tests/qtest/bios-tables-test.c | 38 +++++++++++++++++++++++ tests/tcg/aarch64/pcalign-a64.c | 37 ++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/intc/Kconfig | 5 +++ hw/intc/meson.build | 11 ++++--- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 44 files changed, 429 insertions(+), 145 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT From: Alex Bennée <alex.bennee@linaro.org> While trying to debug a GIC ITS failure I saw some guest errors that had poor formatting as well as leaving me confused as to what failed. As most of the checks aren't possible without a valid dte split that check apart and then check the other conditions in steps. This avoids us relying on undefined data. I still get a failure with the current kvm-unit-tests but at least I know (partially) why now: Exception return from AArch64 EL1 to AArch64 EL1 PC 0x40080588 PASS: gicv3: its-trigger: inv/invall: dev2/eventid=20 now triggers an LPI ITS: MAPD devid=2 size = 0x8 itt=0x40430000 valid=0 INT dev_id=2 event_id=20 process_its_cmd: invalid command attributes: invalid dte: 0 for 2 (MEM_TX: 0) PASS: gicv3: its-trigger: mapd valid=false: no LPI after device unmap SUMMARY: 6 tests, 1 unexpected failures Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211112170454.3158925-1-alex.bennee@linaro.org Cc: Shashi Mallela <shashi.mallela@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_its.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, if (res != MEMTX_OK) { return result; } + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "invalid dte: %"PRIx64" for %d (MEM_TX: %d)\n", + __func__, dte, devid, res); + return result; } - if ((devid > s->dt.maxids.max_devids) || !dte_valid || !ite_valid || - !cte_valid || (eventid > max_eventid)) { + + /* + * In this implementation, in case of guest errors we ignore the + * command and move onto the next command in the queue. + */ + if (devid > s->dt.maxids.max_devids) { qemu_log_mask(LOG_GUEST_ERROR, - "%s: invalid command attributes " - "devid %d or eventid %d or invalid dte %d or" - "invalid cte %d or invalid ite %d\n", - __func__, devid, eventid, dte_valid, cte_valid, - ite_valid); - /* - * in this implementation, in case of error - * we ignore this command and move onto the next - * command in the queue - */ + "%s: invalid command attributes: devid %d>%d", + __func__, devid, s->dt.maxids.max_devids); + + } else if (!dte_valid || !ite_valid || !cte_valid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "dte: %s, ite: %s, cte: %s\n", + __func__, + dte_valid ? "valid" : "invalid", + ite_valid ? "valid" : "invalid", + cte_valid ? "valid" : "invalid"); + } else if (eventid > max_eventid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: eventid %d > %d\n", + __func__, eventid, max_eventid); } else { /* * Current implementation only supports rdbase == procnum -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Add X11, FP5280G2, G220A, Rainier and Fuji. Mention that Swift will be removed in v7.0. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20211117065752.330632-2-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ AST2400 SoC based machines : - ``palmetto-bmc`` OpenPOWER Palmetto POWER8 BMC - ``quanta-q71l-bmc`` OpenBMC Quanta BMC +- ``supermicrox11-bmc`` Supermicro X11 BMC AST2500 SoC based machines : @@ -XXX,XX +XXX,XX @@ AST2500 SoC based machines : - ``romulus-bmc`` OpenPOWER Romulus POWER9 BMC - ``witherspoon-bmc`` OpenPOWER Witherspoon POWER9 BMC - ``sonorapass-bmc`` OCP SonoraPass BMC -- ``swift-bmc`` OpenPOWER Swift BMC POWER9 +- ``swift-bmc`` OpenPOWER Swift BMC POWER9 (to be removed in v7.0) +- ``fp5280g2-bmc`` Inspur FP5280G2 BMC +- ``g220a-bmc`` Bytedance G220A BMC AST2600 SoC based machines : - ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex-A7) - ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC +- ``rainier-bmc`` IBM Rainier POWER10 BMC +- ``fuji-bmc`` Facebook Fuji BMC Supported devices ----------------- -- 2.25.1 From: Joel Stanley <joel@jms.id.au> This is the latest URL for the OpenBMC CI. The old URL still works, but redirects. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-3-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ The Aspeed machines can be started using the ``-kernel`` option to load a Linux kernel or from a firmware. Images can be downloaded from the OpenBMC jenkins : - https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/distro=ubuntu,label=docker-builder + https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ or directly from the OpenBMC GitHub release repository : -- 2.25.1 From: Joel Stanley <joel@jms.id.au> A common use case for the ASPEED machine is to boot a Linux kernel. Provide a full example command line. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-4-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Missing devices Boot options ------------ -The Aspeed machines can be started using the ``-kernel`` option to -load a Linux kernel or from a firmware. Images can be downloaded from -the OpenBMC jenkins : +The Aspeed machines can be started using the ``-kernel`` and ``-dtb`` options +to load a Linux kernel or from a firmware. Images can be downloaded from the +OpenBMC jenkins : https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ @@ -XXX,XX +XXX,XX @@ or directly from the OpenBMC GitHub release repository : https://github.com/openbmc/openbmc/releases +To boot a kernel directly from a Linux build tree: + +.. code-block:: bash + + $ qemu-system-arm -M ast2600-evb -nographic \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/aspeed-ast2600-evb.dtb \ + -initrd rootfs.cpio + The image should be attached as an MTD drive. Run : .. code-block:: bash -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Move it to the supported list. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-5-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Front LEDs (PCA9552 on I2C bus) * LPC Peripheral Controller (a subset of subdevices are supported) * Hash/Crypto Engine (HACE) - Hash support only. TODO: HMAC and RSA + * ADC Missing devices --------------- * Coprocessor support - * ADC (out of tree implementation) * PWM and Fan Controller * Slave GPIO Controller * Super I/O Controller -- 2.25.1 From: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Fix issue where the data register may be overwritten by next character reception before being read and returned. Signed-off-by: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211128120723.4053-1-olivier.heriveaux@ledger.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/stm32f2xx_usart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32f2xx_usart.c +++ b/hw/char/stm32f2xx_usart.c @@ -XXX,XX +XXX,XX @@ static uint64_t stm32f2xx_usart_read(void *opaque, hwaddr addr, return retvalue; case USART_DR: DB_PRINT("Value: 0x%" PRIx32 ", %c\n", s->usart_dr, (char) s->usart_dr); + retvalue = s->usart_dr & 0x3FF; s->usart_sr &= ~USART_SR_RXNE; qemu_chr_fe_accept_input(&s->chr); qemu_set_irq(s->irq, 0); - return s->usart_dr & 0x3FF; + return retvalue; case USART_BRR: return s->usart_brr; case USART_CR1: -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> gicv3_set_gicv3state() is used by arm_gicv3_common.c in arm_gicv3_common_realize(). Since we want to restrict arm_gicv3_cpuif.c to TCG, extract gicv3_set_gicv3state() to a new file. Add this file to the meson 'specific' source set, since it needs access to "cpu.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 10 +--------- hw/intc/arm_gicv3_cpuif_common.c | 22 ++++++++++++++++++++++ hw/intc/meson.build | 1 + 3 files changed, 24 insertions(+), 9 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2016 Linaro Limited * Written by Peter Maydell @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "cpu.h" -void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) -{ - ARMCPU *arm_cpu = ARM_CPU(cpu); - CPUARMState *env = &arm_cpu->env; - - env->gicv3state = (void *)s; -}; - static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { return env->gicv3state; diff --git a/hw/intc/arm_gicv3_cpuif_common.c b/hw/intc/arm_gicv3_cpuif_common.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/intc/arm_gicv3_cpuif_common.c @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * ARM Generic Interrupt Controller v3 + * + * Copyright (c) 2016 Linaro Limited + * Written by Peter Maydell + * + * This code is licensed under the GPL, version 2 or (at your option) + * any later version. + */ + +#include "qemu/osdep.h" +#include "gicv3_internal.h" +#include "cpu.h" + +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + env->gicv3state = (void *)s; +}; diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The TYPE_ARM_GICV3 device is an emulated one. When using KVM, it is recommended to use the TYPE_KVM_ARM_GICV3 device (which uses in-kernel support). When using --with-devices-FOO, it is possible to build a binary with a specific set of devices. When this binary is restricted to KVM accelerator, the TYPE_ARM_GICV3 device is irrelevant, and it is desirable to remove it from the binary. Therefore introduce the CONFIG_ARM_GIC_TCG Kconfig selector which select the files required to have the TYPE_ARM_GICV3 device, but also allowing to de-select this device. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3.c | 2 +- hw/intc/Kconfig | 5 +++++ hw/intc/meson.build | 10 ++++++---- 3 files changed, 12 insertions(+), 5 deletions(-) diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2015 Huawei. * Copyright (c) 2016 Linaro Limited diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Kconfig +++ b/hw/intc/Kconfig @@ -XXX,XX +XXX,XX @@ config APIC select MSI_NONBROKEN select I8259 +config ARM_GIC_TCG + bool + default y + depends on ARM_GIC && TCG + config ARM_GIC_KVM bool default y diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files( 'arm_gic.c', 'arm_gic_common.c', 'arm_gicv2m.c', - 'arm_gicv3.c', 'arm_gicv3_common.c', - 'arm_gicv3_dist.c', 'arm_gicv3_its_common.c', - 'arm_gicv3_redist.c', +)) +softmmu_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files( + 'arm_gicv3.c', + 'arm_gicv3_dist.c', 'arm_gicv3_its.c', + 'arm_gicv3_redist.c', )) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c')) softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) -specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) specific_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_nvic.c')) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *s = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint64_t pc = s->base.pc_next; uint32_t insn; if (s->ss_active && !s->pstate_ss) { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } - s->pc_curr = s->base.pc_next; - insn = arm_ldl_code(env, &s->base, s->base.pc_next, s->sctlr_b); + s->pc_curr = pc; + insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; - s->base.pc_next += 4; + s->base.pc_next = pc + 4; s->fp_access_checked = false; s->sve_access_checked = false; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; unsigned int insn; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_ldl_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_ldl_code(env, &dc->base, pc, dc->sctlr_b); dc->insn = insn; - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; disas_arm_insn(dc, insn); arm_post_translate_insn(dc); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; uint32_t insn; bool is_16bit; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 2; + dc->base.pc_next = pc + 2; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_lduw_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); is_16bit = thumb_insn_is_16bit(dc, dc->base.pc_next, insn); - dc->base.pc_next += 2; + pc += 2; if (!is_16bit) { - uint32_t insn2 = arm_lduw_code(env, &dc->base, dc->base.pc_next, - dc->sctlr_b); - + uint32_t insn2 = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); insn = insn << 16 | insn2; - dc->base.pc_next += 2; + pc += 2; } + dc->base.pc_next = pc; dc->insn = insn; if (dc->pstate_il) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Create arm_check_ss_active and arm_check_kernelpage. Reverse the order of the tests. While it doesn't matter in practice, because only user-only has a kernel page and user-only never sets ss_active, ss_active has priority over execution exceptions and it is best to keep them in the proper order. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_insn_start(DisasContextBase *dcbase, CPUState *cpu) dc->insn_start = tcg_last_op(); } -static bool arm_pre_translate_insn(DisasContext *dc) +static bool arm_check_kernelpage(DisasContext *dc) { #ifdef CONFIG_USER_ONLY /* Intercept jump to the magic kernel page. */ @@ -XXX,XX +XXX,XX @@ static bool arm_pre_translate_insn(DisasContext *dc) return true; } #endif + return false; +} +static bool arm_check_ss_active(DisasContext *dc) +{ if (dc->ss_active && !dc->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The size of the code covered by a TranslationBlock cannot be 0; this is checked via assert in tb_gen_code. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) assert(s->base.num_insns == 1); gen_swstep_exception(s, 0, 0); s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We will reuse this section of arm_deliver_fault for raising pc alignment faults. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tlb_helper.c | 45 +++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 17 deletions(-) diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn, return syn; } -static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, - MMUAccessType access_type, - int mmu_idx, ARMMMUFaultInfo *fi) +static uint32_t compute_fsr_fsc(CPUARMState *env, ARMMMUFaultInfo *fi, + int target_el, int mmu_idx, uint32_t *ret_fsc) { - CPUARMState *env = &cpu->env; - int target_el; - bool same_el; - uint32_t syn, exc, fsr, fsc; ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); - - target_el = exception_target_el(env); - if (fi->stage2) { - target_el = 2; - env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; - if (arm_is_secure_below_el3(env) && fi->s1ns) { - env->cp15.hpfar_el2 |= HPFAR_NS; - } - } - same_el = (arm_current_el(env) == target_el); + uint32_t fsr, fsc; if (target_el == 2 || arm_el_is_aa64(env, target_el) || arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { @@ -XXX,XX +XXX,XX @@ static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, fsc = 0x3f; } + *ret_fsc = fsc; + return fsr; +} + +static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, + MMUAccessType access_type, + int mmu_idx, ARMMMUFaultInfo *fi) +{ + CPUARMState *env = &cpu->env; + int target_el; + bool same_el; + uint32_t syn, exc, fsr, fsc; + + target_el = exception_target_el(env); + if (fi->stage2) { + target_el = 2; + env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; + if (arm_is_secure_below_el3(env) && fi->s1ns) { + env->cp15.hpfar_el2 |= HPFAR_NS; + } + } + same_el = (arm_current_el(env) == target_el); + + fsr = compute_fsr_fsc(env, fi, target_el, mmu_idx, &fsc); + if (access_type == MMU_INST_FETCH) { syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc); exc = EXCP_PREFETCH_ABORT; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> For A64, any input to an indirect branch can cause this. For A32, many indirect branch paths force the branch to be aligned, but BXWritePC does not. This includes the BX instruction but also other interworking changes to PC. Prior to v8, this case is UNDEFINED. With v8, this is CONSTRAINED UNPREDICTABLE and may either raise an exception or force align the PC. We choose to raise an exception because we have the infrastructure, it makes the generated code for gen_bx simpler, and it has the possibility of catching more guest bugs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/syndrome.h | 5 ++++ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++++++--------------- target/arm/tlb_helper.c | 18 ++++++++++++++ target/arm/translate-a64.c | 15 ++++++++++++ target/arm/translate.c | 22 ++++++++++++++++- 6 files changed, 87 insertions(+), 20 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, DEF_HELPER_2(exception_internal, void, env, i32) DEF_HELPER_4(exception_with_syndrome, void, env, i32, i32, i32) DEF_HELPER_2(exception_bkpt_insn, void, env, i32) +DEF_HELPER_2(exception_pc_alignment, noreturn, env, tl) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_illegalstate(void) return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; } +static inline uint32_t syn_pcalignment(void) +{ + return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* We should only arrive here with EC in {DATAABORT, INSNABORT}. */ ec = syn_get_ec(env->exception.syndrome); - assert(ec == EC_DATAABORT || ec == EC_INSNABORT); - - /* Both EC have the same format for FSC, or close enough. */ - fsc = extract32(env->exception.syndrome, 0, 6); - switch (fsc) { - case 0x04 ... 0x07: /* Translation fault, level {0-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MAPERR; + switch (ec) { + case EC_DATAABORT: + case EC_INSNABORT: + /* Both EC have the same format for FSC, or close enough. */ + fsc = extract32(env->exception.syndrome, 0, 6); + switch (fsc) { + case 0x04 ... 0x07: /* Translation fault, level {0-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MAPERR; + break; + case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ + case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_ACCERR; + break; + case 0x11: /* Synchronous Tag Check Fault */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MTESERR; + break; + case 0x21: /* Alignment fault */ + si_signo = TARGET_SIGBUS; + si_code = TARGET_BUS_ADRALN; + break; + default: + g_assert_not_reached(); + } break; - case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ - case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_ACCERR; - break; - case 0x11: /* Synchronous Tag Check Fault */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MTESERR; - break; - case 0x21: /* Alignment fault */ + case EC_PCALIGNMENT: si_signo = TARGET_SIGBUS; si_code = TARGET_BUS_ADRALN; break; diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "internals.h" #include "exec/exec-all.h" +#include "exec/helper-proto.h" static inline uint32_t merge_syn_data_abort(uint32_t template_syn, unsigned int target_el, @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); } +void helper_exception_pc_alignment(CPUARMState *env, target_ulong pc) +{ + ARMMMUFaultInfo fi = { .type = ARMFault_Alignment }; + int target_el = exception_target_el(env); + int mmu_idx = cpu_mmu_index(env, true); + uint32_t fsc; + + env->exception.vaddress = pc; + + /* + * Note that the fsc is not applicable to this exception, + * since any syndrome is pcalignment not insn_abort. + */ + env->exception.fsr = compute_fsr_fsc(env, &fi, target_el, mmu_idx, &fsc); + raise_exception(env, EXCP_PREFETCH_ABORT, syn_pcalignment(), target_el); +} + #if !defined(CONFIG_USER_ONLY) /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint64_t pc = s->base.pc_next; uint32_t insn; + /* Singlestep exceptions have the highest priority. */ if (s->ss_active && !s->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code. + * This should only be possible after an indirect branch, at the + * start of the TB. + */ + assert(s->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + s->pc_curr = pc; insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { + /* Singlestep exceptions have the highest priority. */ + if (arm_check_ss_active(dc)) { + dc->base.pc_next = pc + 4; + return; + } + + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code + * (or the execution of the kernelpage entrypoint). This should only + * be possible after an indirect branch, at the start of the TB. + */ + assert(dc->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + dc->base.is_jmp = DISAS_NORETURN; + dc->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + + if (arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Misaligned thumb PC is architecturally impossible. Assert is better than proceeding, in case we've missed something somewhere. Expand a comment about aligning the pc in gdbstub. Fail an incoming migrate if a thumb pc is misaligned. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/gdbstub.c | 9 +++++++-- target/arm/machine.c | 10 ++++++++++ target/arm/translate.c | 3 +++ 3 files changed, 20 insertions(+), 2 deletions(-) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ int arm_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n) tmp = ldl_p(mem_buf); - /* Mask out low bit of PC to workaround gdb bugs. This will probably - cause problems if we ever implement the Jazelle DBX extensions. */ + /* + * Mask out low bits of PC to workaround gdb bugs. + * This avoids an assert in thumb_tr_translate_insn, because it is + * architecturally impossible to misalign the pc. + * This will probably cause problems if we ever implement the + * Jazelle DBX extensions. + */ if (n == 15) { tmp &= ~1; } diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) return -1; } } + + /* + * Misaligned thumb pc is architecturally impossible. + * We have an assert in thumb_tr_translate_insn to verify this. + * Fail an incoming migrate to avoid this assert. + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; + /* Misaligned thumb PC is architecturally impossible. */ + assert((dc->base.pc_next & 1) == 0); + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Both single-step and pc alignment faults have priority over breakpoint exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; + target_ulong pc; int n; /* @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) return false; } + /* + * Single-step exceptions have priority over breakpoint exceptions. + * If single-step state is active-pending, suppress the bp. + */ + if (arm_singlestep_active(env) && !(env->pstate & PSTATE_SS)) { + return false; + } + + /* + * PC alignment faults have priority over breakpoint exceptions. + */ + pc = is_a64(env) ? env->pc : env->regs[15]; + if ((is_a64(env) || !env->thumb) && (pc & 3) != 0) { + return false; + } + + /* + * Instruction aborts have priority over breakpoint exceptions. + * TODO: We would need to look up the page for PC and verify that + * it is present and executable. + */ + for (n = 0; n < ARRAY_SIZE(env->cpu_breakpoint); n++) { if (bp_wp_matches(cpu, n, false)) { return true; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/pcalign-a64.c | 37 +++++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 4 files changed, 89 insertions(+), 2 deletions(-) create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c diff --git a/tests/tcg/aarch64/pcalign-a64.c b/tests/tcg/aarch64/pcalign-a64.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/pcalign-a64.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 1\n\t" + "str %0, %1\n\t" + "br %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + abort(); +} diff --git a/tests/tcg/arm/pcalign-a32.c b/tests/tcg/arm/pcalign-a32.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/arm/pcalign-a32.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#ifdef __thumb__ +#error "This test must be compiled for ARM" +#endif + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 2\n\t" + "str %0, %1\n\t" + "bx %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + + /* + * From v8, it is CONSTRAINED UNPREDICTABLE whether BXWritePC aligns + * the address or not. If so, we can legitimately fall through. + */ + return EXIT_SUCCESS; +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ VPATH += $(ARM_SRC) AARCH64_SRC=$(SRC_PATH)/tests/tcg/aarch64 VPATH += $(AARCH64_SRC) -# Float-convert Tests -AARCH64_TESTS=fcvt +# Base architecture tests +AARCH64_TESTS=fcvt pcalign-a64 fcvt: LDFLAGS+=-lm diff --git a/tests/tcg/arm/Makefile.target b/tests/tcg/arm/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/arm/Makefile.target +++ b/tests/tcg/arm/Makefile.target @@ -XXX,XX +XXX,XX @@ run-fcvt: fcvt $(call run-test,fcvt,$(QEMU) $<,"$< on $(TARGET_NAME)") $(call diff-out,fcvt,$(ARM_SRC)/fcvt.ref) +# PC alignment test +ARM_TESTS += pcalign-a32 +pcalign-a32: CFLAGS+=-marm + ifeq ($(CONFIG_ARM_COMPATIBLE_SEMIHOSTING),y) # Semihosting smoke test for linux-user -- 2.25.1 In the SSE decode function gen_sse(), we combine a byte 'b' and a value 'b1' which can be [0..3], and switch on them: b |= (b1 << 8); switch (b) { ... default: unknown_op: gen_unknown_opcode(env, s); return; } In three cases inside this switch, we were then also checking for "if (b1 >= 2) { goto unknown_op; }". However, this can never happen, because the 'case' values in each place are 0x0nn or 0x1nn and the switch will have directed the b1 == (2, 3) cases to the default already. This check was added in commit c045af25a52e9 in 2010; the added code was unnecessary then as well, and was apparently intended only to ensure that we never accidentally ended up indexing off the end of an sse_op_table with only 2 entries as a result of future bugs in the decode logic. Change the checks to assert() instead, and make sure they're always immediately before the array access they are protecting. Fixes: Coverity CID 1460207 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/i386/tcg/translate.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/translate.c +++ b/target/i386/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, case 0x171: /* shift xmm, im */ case 0x172: case 0x173: - if (b1 >= 2) { - goto unknown_op; - } val = x86_ldub_code(env, s); if (is_xmm) { tcg_gen_movi_tl(s->T0, val); @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, offsetof(CPUX86State, mmx_t0.MMX_L(1))); op1_offset = offsetof(CPUX86State,mmx_t0); } + assert(b1 < 2); sse_fn_epp = sse_op_table2[((b - 1) & 3) * 8 + (((modrm >> 3)) & 7)][b1]; if (!sse_fn_epp) { @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_epp = sse_op_table6[b].op[b1]; if (!sse_fn_epp) { goto unknown_op; @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_eppi = sse_op_table7[b].op[b1]; if (!sse_fn_eppi) { goto unknown_op; -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). include/hw/i386/x86.h and include/hw/i386/microvm.h break this rule. In fact, the include is not required at all, so we can just drop it from both files. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211129200510.1233037-2-peter.maydell@linaro.org --- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - 2 files changed, 2 deletions(-) diff --git a/include/hw/i386/microvm.h b/include/hw/i386/microvm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/microvm.h +++ b/include/hw/i386/microvm.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_MICROVM_H #define HW_I386_MICROVM_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" diff --git a/include/hw/i386/x86.h b/include/hw/i386/x86.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/x86.h +++ b/include/hw/i386/x86.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_X86_H #define HW_I386_X86_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Move the include to linux-user/hexagon/cpu_loop.c, which needs it for the declaration of cpu_exec_step_atomic(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-id: 20211129200510.1233037-3-peter.maydell@linaro.org --- target/hexagon/cpu.h | 1 - linux-user/hexagon/cpu_loop.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/target/hexagon/cpu.h b/target/hexagon/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.h +++ b/target/hexagon/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUHexagonState CPUHexagonState; #include "fpu/softfloat-types.h" -#include "qemu-common.h" #include "exec/cpu-defs.h" #include "hex_regs.h" #include "mmvec/mmvec.h" diff --git a/linux-user/hexagon/cpu_loop.c b/linux-user/hexagon/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/hexagon/cpu_loop.c +++ b/linux-user/hexagon/cpu_loop.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu-common.h" #include "qemu.h" #include "user-internals.h" #include "cpu_loop-common.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Nothing actually relies on target/rx/cpu.h including it, so we can just drop the include. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-4-peter.maydell@linaro.org --- target/rx/cpu.h | 1 - 1 file changed, 1 deletion(-) diff --git a/target/rx/cpu.h b/target/rx/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.h +++ b/target/rx/cpu.h @@ -XXX,XX +XXX,XX @@ #define RX_CPU_H #include "qemu/bitops.h" -#include "qemu-common.h" #include "hw/registerfields.h" #include "cpu-qom.h" -- 2.25.1 A lot of C files in hw/arm include qemu-common.h when they don't need anything from it. Drop the include lines. omap1.c, pxa2xx.c and strongarm.c retain the include because they use it for the prototype of qemu_get_timedate(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-5-peter.maydell@linaro.org --- hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt.c | 1 - 8 files changed, 8 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/error-report.h" #include "qapi/error.h" diff --git a/hw/arm/digic_boards.c b/hw/arm/digic_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/digic_boards.c +++ b/hw/arm/digic_boards.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "hw/boards.h" #include "qemu/error-report.h" diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "hw/sysbus.h" diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-core.h" #include "hw/qdev-properties.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "sysemu/blockdev.h" diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "qemu/error-report.h" diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" #include "hw/arm/stm32f405_soc.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "cpu.h" #include "hw/sysbus.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "qemu/option.h" -- 2.25.1 The calculation of the length of TLB range invalidate operations in tlbi_aa64_range_get_length() is incorrect in two ways: * the NUM field is 5 bits, but we read only 4 bits * we miscalculate the page_shift value, because of an off-by-one error: TG 0b00 is invalid TG 0b01 is 4K granule size == 4096 == 2^12 TG 0b10 is 16K granule size == 16384 == 2^14 TG 0b11 is 64K granule size == 65536 == 2^16 so page_shift should be (TG - 1) * 2 + 12 Thanks to the bug report submitter Cha HyunSoo for identifying both these errors. Fixes: 84940ed82552d3c ("target/arm: Add support for FEAT_TLBIRANGE") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/734 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211130173257.1274194-1-peter.maydell@linaro.org --- target/arm/helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t tlbi_aa64_range_get_length(CPUARMState *env, uint64_t exponent; uint64_t length; - num = extract64(value, 39, 4); + num = extract64(value, 39, 5); scale = extract64(value, 44, 2); page_size_granule = extract64(value, 46, 2); - page_shift = page_size_granule * 2 + 12; - if (page_size_granule == 0) { qemu_log_mask(LOG_GUEST_ERROR, "Invalid page size granule %d\n", page_size_granule); return 0; } + page_shift = (page_size_granule - 1) * 2 + 12; + exponent = (5 * scale) + 1; length = (num + 1) << (exponent + page_shift); -- 2.25.1 From: Patrick Venture <venture@google.com> The rx_active boolean change to true should always trigger a try_read call that flushes the queue. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211203221002.1719306-1-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/npcm7xx_emc.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/hw/net/npcm7xx_emc.c b/hw/net/npcm7xx_emc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/npcm7xx_emc.c +++ b/hw/net/npcm7xx_emc.c @@ -XXX,XX +XXX,XX @@ static void emc_halt_rx(NPCM7xxEMCState *emc, uint32_t mista_flag) emc_set_mista(emc, mista_flag); } +static void emc_enable_rx_and_flush(NPCM7xxEMCState *emc) +{ + emc->rx_active = true; + qemu_flush_queued_packets(qemu_get_queue(emc->nic)); +} + static void emc_set_next_tx_descriptor(NPCM7xxEMCState *emc, const NPCM7xxEMCTxDesc *tx_desc, uint32_t desc_addr) @@ -XXX,XX +XXX,XX @@ static ssize_t emc_receive(NetClientState *nc, const uint8_t *buf, size_t len1) return len; } -static void emc_try_receive_next_packet(NPCM7xxEMCState *emc) -{ - if (emc_can_receive(qemu_get_queue(emc->nic))) { - qemu_flush_queued_packets(qemu_get_queue(emc->nic)); - } -} - static uint64_t npcm7xx_emc_read(void *opaque, hwaddr offset, unsigned size) { NPCM7xxEMCState *emc = opaque; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, emc->regs[REG_MGSTA] |= REG_MGSTA_RXHA; } if (value & REG_MCMDR_RXON) { - emc->rx_active = true; + emc_enable_rx_and_flush(emc); } else { emc_halt_rx(emc, 0); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, break; case REG_RSDR: if (emc->regs[REG_MCMDR] & REG_MCMDR_RXON) { - emc->rx_active = true; - emc_try_receive_next_packet(emc); + emc_enable_rx_and_flush(emc); } break; case REG_MIIDA: -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> When a virtio-iommu is instantiated, describe it using the ACPI VIOT table. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 7 +++++++ hw/arm/Kconfig | 1 + 2 files changed, 8 insertions(+) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #include "kvm_arm.h" #include "migration/vmstate.h" #include "hw/acpi/ghes.h" +#include "hw/acpi/viot.h" #define ARM_SPI_BASE 32 @@ -XXX,XX +XXX,XX @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) } #endif + if (vms->iommu == VIRT_IOMMU_VIRTIO) { + acpi_add_table(table_offsets, tables_blob); + build_viot(ms, tables_blob, tables->linker, vms->virtio_iommu_bdf, + vms->oem_id, vms->oem_table_id); + } + /* XSDT is pointed to by RSDP */ xsdt = tables_blob->len; build_xsdt(tables_blob, tables->linker, table_offsets, vms->oem_id, diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select DIMM select ACPI_HW_REDUCED select ACPI_APEI + select ACPI_VIOT config CHEETAH bool -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> virtio-iommu is now supported with ACPI VIOT as well as device tree. Remove the restriction that prevents from instantiating a virtio-iommu device under ACPI. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 10 ++-------- hw/virtio/virtio-iommu-pci.c | 12 ++---------- 2 files changed, 4 insertions(+), 18 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine, MachineClass *mc = MACHINE_GET_CLASS(machine); if (device_is_dynamic_sysbus(mc, dev) || - (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM))) { + object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || + object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { return HOTPLUG_HANDLER(machine); } - if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { - VirtMachineState *vms = VIRT_MACHINE(machine); - - if (!vms->bootinfo.firmware_loaded || !virt_is_acpi_enabled(vms)) { - return HOTPLUG_HANDLER(machine); - } - } return NULL; } diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu-pci.c +++ b/hw/virtio/virtio-iommu-pci.c @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); if (!qdev_get_machine_hotplug_handler(DEVICE(vpci_dev))) { - MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); - - error_setg(errp, - "%s machine fails to create iommu-map device tree bindings", - mc->name); - error_append_hint(errp, - "Check your machine implements a hotplug handler " - "for the virtio-iommu-pci device\n"); - error_append_hint(errp, "Check the guest is booted without FW or with " - "-no-acpi\n"); + error_setg(errp, "Check your machine implements a hotplug handler " + "for the virtio-iommu-pci device"); return; } for (int i = 0; i < s->nb_reserved_regions; i++) { -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> We do not support instantiating multiple IOMMUs. Before adding a virtio-iommu, check that no other IOMMU is present. This will detect both "iommu=smmuv3" machine parameter and another virtio-iommu instance. Fixes: 70e89132c9 ("hw/arm/virt: Add the virtio-iommu device tree mappings") Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-4-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, hwaddr db_start = 0, db_end = 0; char *resv_prop_str; + if (vms->iommu != VIRT_IOMMU_NONE) { + error_setg(errp, "virt machine does not support multiple IOMMUs"); + return; + } + switch (vms->msi_controller) { case VIRT_MSI_CTRL_NONE: return; -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> To propagate errors to the caller of the pre_plug callback, use the object_poperty_set*() functions directly instead of the qdev_prop_set*() helpers. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-5-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, db_start, db_end, VIRTIO_IOMMU_RESV_MEM_T_MSI); - qdev_prop_set_uint32(dev, "len-reserved-regions", 1); - qdev_prop_set_string(dev, "reserved-regions[0]", resv_prop_str); + object_property_set_uint(OBJECT(dev), "len-reserved-regions", 1, errp); + object_property_set_str(OBJECT(dev), "reserved-regions[0]", + resv_prop_str, errp); g_free(resv_prop_str); } } -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Create empty data files and allow updates for the upcoming VIOT tests. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-6-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 +++ tests/data/acpi/q35/DSDT.viot | 0 tests/data/acpi/q35/VIOT.viot | 0 tests/data/acpi/virt/VIOT | 0 4 files changed, 3 insertions(+) create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,4 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/VIOT", +"tests/data/acpi/q35/DSDT.viot", +"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT new file mode 100644 index XXXXXXX..XXXXXXX -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add two test cases for VIOT, one on the q35 machine and the other on virt. To test complex topologies the q35 test has two PCIe buses that bypass the IOMMU (and are therefore not described by VIOT), and two buses that are translated by virtio-iommu. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-7-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test.c | 38 ++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test.c +++ b/tests/qtest/bios-tables-test.c @@ -XXX,XX +XXX,XX @@ static void test_acpi_virt_tcg(void) free_test_data(&data); } +static void test_acpi_q35_viot(void) +{ + test_data data = { + .machine = MACHINE_Q35, + .variant = ".viot", + }; + + /* + * To keep things interesting, two buses bypass the IOMMU. + * VIOT should only describes the other two buses. + */ + test_acpi_one("-machine default_bus_bypass_iommu=on " + "-device virtio-iommu-pci " + "-device pxb-pcie,bus_nr=0x10,id=pcie.100,bus=pcie.0 " + "-device pxb-pcie,bus_nr=0x20,id=pcie.200,bus=pcie.0,bypass_iommu=on " + "-device pxb-pcie,bus_nr=0x30,id=pcie.300,bus=pcie.0", + &data); + free_test_data(&data); +} + +static void test_acpi_virt_viot(void) +{ + test_data data = { + .machine = "virt", + .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd", + .uefi_fl2 = "pc-bios/edk2-arm-vars.fd", + .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2", + .ram_start = 0x40000000ULL, + .scan_len = 128ULL * 1024 * 1024, + }; + + test_acpi_one("-cpu cortex-a57 " + "-device virtio-iommu-pci", &data); + free_test_data(&data); +} + static void test_oem_fields(test_data *data) { int i; @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/q35/kvm/xapic", test_acpi_q35_kvm_xapic); qtest_add_func("acpi/q35/kvm/dmar", test_acpi_q35_kvm_dmar); } + qtest_add_func("acpi/q35/viot", test_acpi_q35_viot); } else if (strcmp(arch, "aarch64") == 0) { if (has_tcg) { qtest_add_func("acpi/virt", test_acpi_virt_tcg); @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/virt/memhp", test_acpi_virt_tcg_memhp); qtest_add_func("acpi/virt/pxb", test_acpi_virt_tcg_pxb); qtest_add_func("acpi/virt/oem-fields", test_acpi_oem_fields_virt); + qtest_add_func("acpi/virt/viot", test_acpi_virt_viot); } } ret = g_test_run(); -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add expected blobs of the VIOT and DSDT table for the VIOT test on the q35 machine. Since the test instantiates a virtio device and two PCIe expander bridges, DSDT.viot has more blocks than the base DSDT. The VIOT table generated for the q35 test is: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000070 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 3D [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0003 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0010 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00003000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 3000 [04Eh 0078 2] PCI BDF end : 30FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 [058h 0088 1] Type : 01 [PCI Range] [059h 0089 1] Reserved : 00 [05Ah 0090 2] Length : 0018 [05Ch 0092 4] Endpoint start : 00001000 [060h 0096 2] PCI Segment start : 0000 [062h 0098 2] PCI Segment end : 0000 [064h 0100 2] PCI BDF start : 1000 [066h 0102 2] PCI BDF end : 10FF [068h 0104 2] Output node : 0030 [06Ah 0106 6] Reserved : 000000000000 And the DSDT diff is: @@ -XXX,XX +XXX,XX @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/q35/DSDT, Fri Dec 10 15:03:08 2021 + * Disassembly of /tmp/aml-H9Y5D1, Fri Dec 10 15:02:27 2021 * * Original Table Header: * Signature "DSDT" - * Length 0x00002061 (8289) + * Length 0x000024B6 (9398) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0xFA + * Checksum 0xA7 * OEM ID "BOCHS " * OEM Table ID "BXPC " * OEM Revision 0x00000001 (1) @@ -XXX,XX +XXX,XX @@ } } + Scope (\_SB) + { + Device (PC30) + { + Name (_UID, 0x30) // _UID: Unique ID + Name (_BBN, 0x30) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC30._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0030, // Range Minimum + 0x0030, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC20) + { + Name (_UID, 0x20) // _UID: Unique ID + Name (_BBN, 0x20) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC20._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0020, // Range Minimum + 0x0020, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC10) + { + Name (_UID, 0x10) // _UID: Unique ID + Name (_BBN, 0x10) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC10._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0010, // Range Minimum + 0x0010, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + Scope (\_SB.PCI0) { Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings @@ -XXX,XX +XXX,XX @@ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum - 0x00FF, // Range Maximum + 0x000F, // Range Maximum 0x0000, // Translation Offset - 0x0100, // Length + 0x0010, // Length ,, ) IO (Decode16, 0x0CF8, // Range Minimum @@ -XXX,XX +XXX,XX @@ } } + Device (S10) + { + Name (_ADR, 0x00020000) // _ADR: Address + } + + Device (S18) + { + Name (_ADR, 0x00030000) // _ADR: Address + } + + Device (S20) + { + Name (_ADR, 0x00040000) // _ADR: Address + } + + Device (S28) + { + Name (_ADR, 0x00050000) // _ADR: Address + } + Method (PCNT, 0, NotSerialized) { } Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-8-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -XXX,XX +XXX,XX @@ /* List of comma-separated changed AML files to ignore */ "tests/data/acpi/virt/VIOT", -"tests/data/acpi/q35/DSDT.viot", -"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 9398 zcmeHNO>7&-8J*>iv|O&FB}G~Oi$yp||57BBoWHhc5OS9yDTx$CQgH$r;8Idr*-4Q_ z5(9Az1F`}niVsB-)<KW7p`g9Br(A2Gm-gmc1N78GFS!;)e2V(MnH_0{q<{#yMgn&C zn|*J-d9yqFhO_H6z19~`FlPL*u<DkZ*}|)JH;X@mF-FI<cPg<fti9tEN*yB^i5czN zNq&q?!OZ;BE3B7{KWzJ-`Tn~f`9?Qj8~2^N8{Oc8J%57{==w%rS#;nOCp*nTr@iZ1 zb+?i;JLQUJ=O0?8*>S~D)a>NF1~WVB6^~_B#yhJ`H+JU@=6aXs`?Yv)J2h=N?drcS zeLZ*n<<Bm^n}6`jfBx#u8&(W}1?)}iF9o#mZ~E2+zwdn7yK3AbIzKnxpZ>JRPm3~# z&ICS{+_OayRW-l=Mtk=~uaS3o8z<_udd|(wqg`&JnVPfCe>BUOO`Su3e>pff_^UW% z&JE^NO`)=Amg~iqRB1pPscP?(>#ZuY8GHCmlEvD$9g3%4Db~Dfz2SATnddvrR-Oe^ z;s;dJec!hnzi)ri^I6YN9vtkm{^TdUF8h7gX8-<Qe4p)GQ=)AtYx2VcwdLVAEXEjG z^Mj|UHPqkj-LsWuzQem1>F3atdZn=zv3$#RmZzSHN+6-yyU#8cJb=YDilX&sl}vNm znkgAR^O<3kj4if>{ly5fwRfMWuC5=lrlvKPX~i#654Cp}R_d*JS$9laZ$ra6)<ns8 zFZy28G%xP(nit&F>LDi%G<tIc=TY=gl$jSD&Uv!Yat~XR46h%rI$!}a%!|xG7u8Zn zeY8_|n=K>xz_v_W8VX$W-Fg-qFWcT}7MCyz{%%{ia7hZ>Law-k6NOr}VI&_48U=2l zwqDKFE8eTwwozDdms#e?x?5a|v>&JF;2_v0L~z5n%BYU^52<*cWuD4|GYUm@1+?)) zte^45>Rz)t*<T5V#={r>@t@{%?^i#W{i=HAZ*Dc9y59Va-+#P!jrGs;u38a{fLr`N zvT@rUu>DljxJ?^&Z?-?vyJn3C>3D=qux{Y*bs5|5n)Qmi$TD^Zdn4GU$ocJS2Hh-< z`xPI^^+v0nUVdjMos8k`WGl7hA`{03ju%<lrgAHSpd^DRf-*}_#Ly0mB!LSfVgWcQ z&T$@~G9)JI=hz5m0vkrel+Xy{Oh7pkAu-V!j*W7rY(bO}Q$nMH2`FbGB&N)QaV4<4 zo)~9JXiP9=;}NPl<C@MmXG&;XFlFNrsyfFsonxFSp<}vEgsRSQP3O3#b6nSnP}ON_ zI!#Tdsp~|j>ckUB>FI=~GokB5sOq#dotCE4(sd$KbtW~PNlj-`*NIToiD#j5J#9^= zt?NXn>YUJYPG~wObe#xQos*i*NloXZt`niEb4t@WrRki~bs|)CI+{*L)9L6s5vn>< zn$DD_Go|Z9sOn5>I@6lYw5}7Os&iV?Ij!lO)^#FOb!If38BJ$K*NIToIiu;E(R9w} zIuWWmPiZ<&X*y5oIuWWmF_XaEC!a&Jn$B5WCqh-{X-(&8P3LJ{Cqh-{8P3dyPr@^t zSqL9?X9Uwd3W@23*s~h*tj0X6GZCuHa~kuU#yqDp5vt7d8uPryJg+kms?5hU=3^T3 zF`bD}WnSP+=`t5MQ$FJ_2&Q~+BP6E0f^%BVIW6a$o)e+SX~IDBih-7z6{O~7YTy`& zLjy&Cv?7QikV#>n0>>@MV8oK`Gmun34-FKdlm-J8SZSaNlnhir4-FI{S|bfqV8e)V zss<{chX#reE#g=hsKAC%sF6d-Km}BWs!kZFsFpKfpbC@>6rprQGEjt4Ck#|zITHq| zK*>M_l;<P^MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=xY&!axO< zGhv_#lnhirIg<<&q0|Wj6<E%MfhtfkPyyvkGEjt4Ck#|zITHq|K*>M_lrzad5lWpf zP=V!47^ngz0~JutBm+e#b;3XemNQ|X3X}{~Ksl2P6rt1!0~J`#gn=qhGEf2KOfpb} zQYQ>lU^x>8szAv=1(Y+%KoLrvFi?TzOc<yFB?A>u&LjgxD0RX>1(q{mpbC@>R6seC z3>2Z%2?G^a&V+#~P%=;f<xDbAgi<FARA4z12C6{GKn0XD$v_cGoiI>=<xCi;0wn_# zP|hR+MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=rz^3{+q_69%e4 z$v_2^Gs!>^N}VuJf#pmXr~)Me6;RG314Srx!axxz28u{EP=u<1B2)}iVZuNaCK;&0 zBm-5LFi?dF167!0pbC==RAItE6($T+VUmF=Ofpb~2?JG_Fi?d_2C6X0Kouqo6p_5T zFi=FeV!SiSKoR0H$dH(_Z(*Q_WZ%L-5y`$K14StNmJAdjmWs}HV4<vU_xO+1efmLq zZ;W>N_U)fP6Qy6Nw5mbt9Y(#emWSi66=>tq#xoh#Ue=0qyhxi8ZOUe5y0V7VfPUhp zwX=;ymc+i5%sg9Ja~lZ&8oAV@mHc>&CHP9v4R(jhtT?un;O4e9#pno)Xkh7OWgK&a zyj=3Iv0OuoK_;5rOr5f(Kb~ZXDBO+V`OWYo#_C08imwChQxnjdd?wZLDou8aj;$SD zGDYiA3<$Tu<JnHL(KPOChi#zrR32t83}naR$+ym4P_h?z_5#|cW-nw$XD_sOtE62l zrD3@*)NVyiklt0&yF9%+klsBey&I<Y2E<!f(E8TuJte)z(|ZHyy<^gQVfx}=`q&B5 z7nSryp1wGczIaUfVwiq$Fn#<4=@*ssi#+|}K>EdF(l3VTOM~ghPLRH&q%ZOGrGfON zW73zx^yR_y<0nX8R??Sw`tm^f@-gYlNFSp|*<gA{q?Zp5Oe-+l#rmyYmKozi9y=P> zVReJU*h=ZuVXiS$ohTbw-O#v9>(yZbGE|)?8(H1ZIKvV!jWa0>vy!3eMA^vdhQ>`s zuMSg{q3T50$m)j1!HixV<}X9liL#N^4c*tL^y)CF8LCc{jjV3yKAqL8!%SzWI#H%q z=bSrQ&)%JCRttF5g4Zf`6l?y@>PzD7MA^D>wBlcH6r1ucwJ<p0O%rZ?JzIY3-QdmZ zzs|n>`a5r3e|z)wcUaqS>nqFQ-8x}eCF4u`OWUxqst-@1rSmUs%WmKP5e0dcb?e2N z;Z|x*!);VwF|Yuhqs^khqOM!@u*jY!WYldISF(V6`BoNd&6Qfk3>X#SuD^7J>p_D= zBPa51y^_n#=cpOt#Zf$ya$Ae9Mfz56n|<i!a=ELS@)%a{^NIH3SDuN<R~sah1km#P zU@?*f%<rG=4W1wgfi;C?_n|W@%lm$&8YfvNOJodIg&IcIpIJQRHr<+ej11GQ6)&eF z2Lam*jIH}#y0>KnY%4JQfOYS$*uU%f#@$U6`N8I3N-lV?5ErFCdv~xDmu2(wexld4 z4v^;aVAT2k6GJ^m*FD(Wqc(Qg^)6a<?}h$zLoj}4;PP!+(O{@!a1y-hoAhF_7!z+6 zslpAmNtYbjHrw-~#SPVk_FUf>-Obg6yV`8o$8_`PyJe_;bY5_EMBfBfWU!Q=*9HsG z%_Cda{@_Krr!oHVhv9+y+T5qR8zZ2aZ>5r!$*|f$^U%yBUYfR&B!+EYy_PwL!BeUi zJH^}r3r9Q+B)X@Z)fk=P13w&7x#wBtXTZ)g>WITPg5r&pQc!nmyrmk#S(>>b9xnNr zx_b#v9Xv-Y><Wb%?S^0Xe&<)bbKl_=Z|3C$tf|F<bYzE*mfHB;uC)`q-?buaBe?l? zcLTpK*k<49Z32`K?|nSBMFqxTK^_IE-li2fEGdK~(ZdoKBl6ab4a;Hler#`xvEXJG zb?<E%EZExfX>jcOVhS*0rS~RS1dA#xhkv@Nct@#q?LyeKS<$uFec!bw>{@uu$gZ6a zyVen1i{1BKd%~`D7|m$;U0a<I*3I7%^N%N%lGYdU_GS!gaR8T$NA@GzFi~z`l7hdl zarZy6590|88pi(1zq;V(>38zM0sT&<zX;R5$1w3;`_JMG`;&I&0Y23DMx1%@(w(R9 z4M$j;D5J+Gy%fijRQsctzFKf&cv|BAz#YLq3CZJWDdtL4u1u1|mkdcUp7|sxJC+?Y z_@@s`v3j}Q7*z>6X~cwUxUL8G1KT)_XTp!KAbs;vCp{K3&~_X@+ew=-D}v`2MbFV0 zQsVsL=rXi-pI*G|iiz;VTCutgUs)hDzV1+4?8KcoP3xROf<M%qC6lgVdpFt4<-|uM z=#rl_b1#YjSIl6Toj2z_hOZcKupkdE(LozC(fN=FY(x|sk)ym|;Rq2E1xJWD%Z!ol Gu>S+TT-130 literal 0 HcmV?d00001 diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 112 zcmWIZ^baXu00LVle`k+i1*eDrX9XZ&1PX!JAex!M0Hgv8m>C3sGzdcgBZCA3T-xBj Q0Zb)W9Hva*zW_`e0M!8s0RR91 literal 0 HcmV?d00001 -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> The VIOT blob contains the following: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000058 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 66 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0002 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0008 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00000000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 0000 [04Eh 0078 2] PCI BDF end : 00FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 Acked-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-9-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 1 - tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes 2 files changed, 1 deletion(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,2 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/VIOT", diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 88 zcmWIZ^bd((0D?3pe`k+i1*eDrX9XZ&1PX!JAexE60Hgv8m>C3sGzXN&z`)2L0cSHX I{D-Rq0Q5fy0RR91 literal 0 HcmV?d00001 -- 2.25.1