Second lot of ARM changes to sneak in before freeze: * fixed version of the raspi2 sd controller patches * GICv3 save/restore * v7M QOMify I've also included the Linux header update patches stolen from Paolo's pullreq since it hasn't quite hit master yet. thanks -- PMM The following changes since commit 1bbe5dc66b770d7bedd1d51d7935da948a510dd6: Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170228' into staging (2017-02-28 14:50:17 +0000) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170228-1 for you to fetch changes up to 1eeb5c7deacbfb4d4cad17590a16a99f3d85eabb: bcm2835: add sdhost and gpio controllers (2017-02-28 17:10:00 +0000) ---------------------------------------------------------------- target-arm queue: * raspi2: add gpio controller and sdhost controller, with the wiring so the guest can switch which controller the SD card is attached to (this is sufficient to get raspbian kernels to boot) * GICv3: support state save/restore from KVM * update Linux headers to 4.11 * refactor and QOMify the ARMv7M container object ---------------------------------------------------------------- Clement Deschamps (3): hw/sd: add card-reparenting function bcm2835_gpio: add bcm2835 gpio controller bcm2835: add sdhost and gpio controllers Paolo Bonzini (2): update-linux-headers: update for 4.11 update Linux headers to 4.11 Peter Maydell (12): armv7m: Abstract out the "load kernel" code armv7m: Move NVICState struct definition into header armv7m: QOMify the armv7m container armv7m: Use QOMified armv7m object in armv7m_init() armv7m: Make ARMv7M object take memory region link armv7m: Make NVIC expose a memory region rather than mapping itself armv7m: Make bitband device take the address space to access armv7m: Don't put core v7M devices under CONFIG_STELLARIS armv7m: Split systick out from NVIC stm32f205: Create armv7m object without using armv7m_init() stm32f205: Rename 'nvic' local to 'armv7m' qdev: Have qdev_set_parent_bus() handle devices already on a bus Vijaya Kumar K (4): hw/intc/arm_gicv3_kvm: Add ICC_SRE_EL1 register to vmstate hw/intc/arm_gicv3_kvm: Implement get/put functions target-arm: Add GICv3CPUState in CPUARMState struct hw/intc/arm_gicv3_kvm: Reset GICv3 cpu interface registers hw/gpio/Makefile.objs | 1 + hw/intc/Makefile.objs | 2 +- hw/timer/Makefile.objs | 1 + hw/intc/gicv3_internal.h | 3 + include/hw/arm/arm.h | 12 + include/hw/arm/armv7m.h | 63 +++ include/hw/arm/armv7m_nvic.h | 62 ++ include/hw/arm/bcm2835_peripherals.h | 4 + include/hw/arm/stm32f205_soc.h | 4 +- include/hw/gpio/bcm2835_gpio.h | 39 ++ include/hw/intc/arm_gicv3_common.h | 1 + include/hw/sd/sd.h | 11 + include/hw/timer/armv7m_systick.h | 34 ++ include/standard-headers/asm-x86/hyperv.h | 8 + include/standard-headers/linux/input-event-codes.h | 2 +- include/standard-headers/linux/pci_regs.h | 25 + include/standard-headers/linux/virtio_ids.h | 1 + linux-headers/asm-arm/kvm.h | 15 + linux-headers/asm-arm/unistd-common.h | 357 ++++++++++++ linux-headers/asm-arm/unistd-eabi.h | 5 + linux-headers/asm-arm/unistd-oabi.h | 17 + linux-headers/asm-arm/unistd.h | 419 +------------- linux-headers/asm-arm64/kvm.h | 13 + linux-headers/asm-powerpc/kvm.h | 27 + linux-headers/asm-powerpc/unistd.h | 1 + linux-headers/asm-x86/kvm_para.h | 13 +- linux-headers/linux/kvm.h | 24 +- linux-headers/linux/kvm_para.h | 2 + linux-headers/linux/userfaultfd.h | 67 ++- linux-headers/linux/vfio.h | 10 + target/arm/cpu.h | 2 + hw/arm/armv7m.c | 379 ++++++++----- hw/arm/bcm2835_peripherals.c | 43 +- hw/arm/netduino2.c | 7 +- hw/arm/stm32f205_soc.c | 28 +- hw/core/qdev.c | 14 + hw/gpio/bcm2835_gpio.c | 353 ++++++++++++ hw/intc/arm_gicv3_common.c | 38 ++ hw/intc/arm_gicv3_cpuif.c | 8 + hw/intc/arm_gicv3_kvm.c | 629 ++++++++++++++++++++- hw/intc/armv7m_nvic.c | 214 ++----- hw/sd/core.c | 27 + hw/timer/armv7m_systick.c | 240 ++++++++ default-configs/arm-softmmu.mak | 2 + hw/timer/trace-events | 6 + scripts/update-linux-headers.sh | 13 +- 46 files changed, 2479 insertions(+), 767 deletions(-) create mode 100644 include/hw/arm/armv7m.h create mode 100644 include/hw/arm/armv7m_nvic.h create mode 100644 include/hw/gpio/bcm2835_gpio.h create mode 100644 include/hw/timer/armv7m_systick.h create mode 100644 linux-headers/asm-arm/unistd-common.h create mode 100644 linux-headers/asm-arm/unistd-eabi.h create mode 100644 linux-headers/asm-arm/unistd-oabi.h create mode 100644 hw/gpio/bcm2835_gpio.c create mode 100644 hw/timer/armv7m_systick.c Abstract the "load kernel" code out of armv7m_init() into its own function. This includes the registration of the CPU reset function, to parallel how we handle this for A profile cores. We make the function public so that boards which choose to directly instantiate an ARMv7M device object can call it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-2-git-send-email-peter.maydell@linaro.org --- include/hw/arm/arm.h | 12 ++++++++++++ hw/arm/armv7m.c | 23 ++++++++++++++++++----- 2 files changed, 30 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/arm.h b/include/hw/arm/arm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/arm.h +++ b/include/hw/arm/arm.h @@ -XXX,XX +XXX,XX @@ typedef enum { /* armv7m.c */ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, const char *kernel_filename, const char *cpu_model); +/** + * armv7m_load_kernel: + * @cpu: CPU + * @kernel_filename: file to load + * @mem_size: mem_size: maximum image size to load + * + * Load the guest image for an ARMv7M system. This must be called by + * any ARMv7M board, either directly or via armv7m_init(). (This is + * necessary to ensure that the CPU resets correctly on system reset, + * as well as for kernel loading.) + */ +void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size); /* * struct used as a parameter of the arm_load_kernel machine init diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, ARMCPU *cpu; CPUARMState *env; DeviceState *nvic; - int image_size; - uint64_t entry; - uint64_t lowaddr; - int big_endian; if (cpu_model == NULL) { cpu_model = "cortex-m3"; @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, qdev_init_nofail(nvic); sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); + armv7m_load_kernel(cpu, kernel_filename, mem_size); + return nvic; +} + +void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) +{ + int image_size; + uint64_t entry; + uint64_t lowaddr; + int big_endian; #ifdef TARGET_WORDS_BIGENDIAN big_endian = 1; @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, } } + /* CPU objects (unlike devices) are not automatically reset on system + * reset, so we must always register a handler to do so. Unlike + * A-profile CPUs, we don't need to do anything special in the + * handler to arrange that it starts correctly. + * This is arguably the wrong place to do this, but it matches the + * way A-profile does it. Note that this means that every M profile + * board must call this function! + */ qemu_register_reset(armv7m_reset, cpu); - return nvic; } static Property bitband_properties[] = { -- 2.7.4 Move the NVICState struct definition into a header, so we can embed it into other QOM objects like SoCs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-3-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m_nvic.h | 66 ++++++++++++++++++++++++++++++++++++++++++++ hw/intc/armv7m_nvic.c | 49 +------------------------------- 2 files changed, 67 insertions(+), 48 deletions(-) create mode 100644 include/hw/arm/armv7m_nvic.h diff --git a/include/hw/arm/armv7m_nvic.h b/include/hw/arm/armv7m_nvic.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M NVIC object + * + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell <peter.maydell@linaro.org> + * + * This code is licensed under the GPL version 2 or later. + */ + +#ifndef HW_ARM_ARMV7M_NVIC_H +#define HW_ARM_ARMV7M_NVIC_H + +#include "target/arm/cpu.h" +#include "hw/sysbus.h" + +#define TYPE_NVIC "armv7m_nvic" + +#define NVIC(obj) \ + OBJECT_CHECK(NVICState, (obj), TYPE_NVIC) + +/* Highest permitted number of exceptions (architectural limit) */ +#define NVIC_MAX_VECTORS 512 + +typedef struct VecInfo { + /* Exception priorities can range from -3 to 255; only the unmodifiable + * priority values for RESET, NMI and HardFault can be negative. + */ + int16_t prio; + uint8_t enabled; + uint8_t pending; + uint8_t active; + uint8_t level; /* exceptions <=15 never set level */ +} VecInfo; + +typedef struct NVICState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + ARMCPU *cpu; + + VecInfo vectors[NVIC_MAX_VECTORS]; + uint32_t prigroup; + + /* vectpending and exception_prio are both cached state that can + * be recalculated from the vectors[] array and the prigroup field. + */ + unsigned int vectpending; /* highest prio pending enabled exception */ + int exception_prio; /* group prio of the highest prio active exception */ + + struct { + uint32_t control; + uint32_t reload; + int64_t tick; + QEMUTimer *timer; + } systick; + + MemoryRegion sysregmem; + MemoryRegion container; + + uint32_t num_irq; + qemu_irq excpout; + qemu_irq sysresetreq; +} NVICState; + +#endif diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "qemu/timer.h" #include "hw/arm/arm.h" +#include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" #include "exec/address-spaces.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ * "exception" more or less interchangeably. */ #define NVIC_FIRST_IRQ 16 -#define NVIC_MAX_VECTORS 512 #define NVIC_MAX_IRQ (NVIC_MAX_VECTORS - NVIC_FIRST_IRQ) /* Effective running priority of the CPU when no exception is active @@ -XXX,XX +XXX,XX @@ */ #define NVIC_NOEXC_PRIO 0x100 -typedef struct VecInfo { - /* Exception priorities can range from -3 to 255; only the unmodifiable - * priority values for RESET, NMI and HardFault can be negative. - */ - int16_t prio; - uint8_t enabled; - uint8_t pending; - uint8_t active; - uint8_t level; /* exceptions <=15 never set level */ -} VecInfo; - -typedef struct NVICState { - /*< private >*/ - SysBusDevice parent_obj; - /*< public >*/ - - ARMCPU *cpu; - - VecInfo vectors[NVIC_MAX_VECTORS]; - uint32_t prigroup; - - /* vectpending and exception_prio are both cached state that can - * be recalculated from the vectors[] array and the prigroup field. - */ - unsigned int vectpending; /* highest prio pending enabled exception */ - int exception_prio; /* group prio of the highest prio active exception */ - - struct { - uint32_t control; - uint32_t reload; - int64_t tick; - QEMUTimer *timer; - } systick; - - MemoryRegion sysregmem; - MemoryRegion container; - - uint32_t num_irq; - qemu_irq excpout; - qemu_irq sysresetreq; -} NVICState; - -#define TYPE_NVIC "armv7m_nvic" - -#define NVIC(obj) \ - OBJECT_CHECK(NVICState, (obj), TYPE_NVIC) - static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 }; -- 2.7.4 Create a proper QOM object for the armv7m container, which holds the CPU, the NVIC and the bitband regions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-4-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 51 ++++++++++++++++++ hw/arm/armv7m.c | 139 +++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 178 insertions(+), 12 deletions(-) create mode 100644 include/hw/arm/armv7m.h diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M CPU object + * + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell <peter.maydell@linaro.org> + * + * This code is licensed under the GPL version 2 or later. + */ + +#ifndef HW_ARM_ARMV7M_H +#define HW_ARM_ARMV7M_H + +#include "hw/sysbus.h" +#include "hw/arm/armv7m_nvic.h" + +#define TYPE_BITBAND "ARM,bitband-memory" +#define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + MemoryRegion iomem; + uint32_t base; +} BitBandState; + +#define TYPE_ARMV7M "armv7m" +#define ARMV7M(obj) OBJECT_CHECK(ARMv7MState, (obj), TYPE_ARMV7M) + +#define ARMV7M_NUM_BITBANDS 2 + +/* ARMv7M container object. + * + Unnamed GPIO input lines: external IRQ lines for the NVIC + * + Named GPIO output SYSRESETREQ: signalled for guest AIRCR.SYSRESETREQ + * + Property "cpu-model": CPU model to instantiate + * + Property "num-irq": number of external IRQ lines + */ +typedef struct ARMv7MState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + NVICState nvic; + BitBandState bitband[ARMV7M_NUM_BITBANDS]; + ARMCPU *cpu; + + /* Properties */ + char *cpu_model; +} ARMv7MState; + +#endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "hw/arm/armv7m.h" #include "qapi/error.h" #include "qemu-common.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps bitband_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -#define TYPE_BITBAND "ARM,bitband-memory" -#define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) - -typedef struct { - /*< private >*/ - SysBusDevice parent_obj; - /*< public >*/ - - MemoryRegion iomem; - uint32_t base; -} BitBandState; - static void bitband_init(Object *obj) { BitBandState *s = BITBAND(obj); @@ -XXX,XX +XXX,XX @@ static void armv7m_bitband_init(void) /* Board init. */ +static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { + 0x20000000, 0x40000000 +}; + +static const hwaddr bitband_output_addr[ARMV7M_NUM_BITBANDS] = { + 0x22000000, 0x42000000 +}; + +static void armv7m_instance_init(Object *obj) +{ + ARMv7MState *s = ARMV7M(obj); + int i; + + /* Can't init the cpu here, we don't yet know which model to use */ + + object_initialize(&s->nvic, sizeof(s->nvic), "armv7m_nvic"); + qdev_set_parent_bus(DEVICE(&s->nvic), sysbus_get_default()); + object_property_add_alias(obj, "num-irq", + OBJECT(&s->nvic), "num-irq", &error_abort); + + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + object_initialize(&s->bitband[i], sizeof(s->bitband[i]), TYPE_BITBAND); + qdev_set_parent_bus(DEVICE(&s->bitband[i]), sysbus_get_default()); + } +} + +static void armv7m_realize(DeviceState *dev, Error **errp) +{ + ARMv7MState *s = ARMV7M(dev); + Error *err = NULL; + int i; + char **cpustr; + ObjectClass *oc; + const char *typename; + CPUClass *cc; + + cpustr = g_strsplit(s->cpu_model, ",", 2); + + oc = cpu_class_by_name(TYPE_ARM_CPU, cpustr[0]); + if (!oc) { + error_setg(errp, "Unknown CPU model %s", cpustr[0]); + g_strfreev(cpustr); + return; + } + + cc = CPU_CLASS(oc); + typename = object_class_get_name(oc); + cc->parse_features(typename, cpustr[1], &err); + g_strfreev(cpustr); + if (err) { + error_propagate(errp, err); + return; + } + + s->cpu = ARM_CPU(object_new(typename)); + if (!s->cpu) { + error_setg(errp, "Unknown CPU model %s", s->cpu_model); + return; + } + + object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + /* Note that we must realize the NVIC after the CPU */ + object_property_set_bool(OBJECT(&s->nvic), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + /* Alias the NVIC's input and output GPIOs as our own so the board + * code can wire them up. (We do this in realize because the + * NVIC doesn't create the input GPIO array until realize.) + */ + qdev_pass_gpios(DEVICE(&s->nvic), dev, NULL); + qdev_pass_gpios(DEVICE(&s->nvic), dev, "SYSRESETREQ"); + + /* Wire the NVIC up to the CPU */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->nvic), 0, + qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); + s->cpu->env.nvic = &s->nvic; + + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + Object *obj = OBJECT(&s->bitband[i]); + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); + + object_property_set_int(obj, bitband_input_addr[i], "base", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + object_property_set_bool(obj, true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + sysbus_mmio_map(sbd, 0, bitband_output_addr[i]); + } +} + +static Property armv7m_properties[] = { + DEFINE_PROP_STRING("cpu-model", ARMv7MState, cpu_model), + DEFINE_PROP_END_OF_LIST(), +}; + +static void armv7m_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = armv7m_realize; + dc->props = armv7m_properties; +} + +static const TypeInfo armv7m_info = { + .name = TYPE_ARMV7M, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ARMv7MState), + .instance_init = armv7m_instance_init, + .class_init = armv7m_class_init, +}; + static void armv7m_reset(void *opaque) { ARMCPU *cpu = opaque; @@ -XXX,XX +XXX,XX @@ static const TypeInfo bitband_info = { static void armv7m_register_types(void) { type_register_static(&bitband_info); + type_register_static(&armv7m_info); } type_init(armv7m_register_types) -- 2.7.4 Make the legacy armv7m_init() function use the newly QOMified armv7m object rather than doing everything by hand. We can return the armv7m object rather than the NVIC from armv7m_init() because its interface to the rest of the board (GPIOs, etc) is identical. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-5-git-send-email-peter.maydell@linaro.org --- hw/arm/armv7m.c | 49 ++++++++++++------------------------------------- 1 file changed, 12 insertions(+), 37 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void bitband_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } -static void armv7m_bitband_init(void) -{ - DeviceState *dev; - - dev = qdev_create(NULL, TYPE_BITBAND); - qdev_prop_set_uint32(dev, "base", 0x20000000); - qdev_init_nofail(dev); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x22000000); - - dev = qdev_create(NULL, TYPE_BITBAND); - qdev_prop_set_uint32(dev, "base", 0x40000000); - qdev_init_nofail(dev); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x42000000); -} - /* Board init. */ static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { @@ -XXX,XX +XXX,XX @@ static void armv7m_reset(void *opaque) /* Init CPU and memory for a v7-M based board. mem_size is in bytes. - Returns the NVIC array. */ + Returns the ARMv7M device. */ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, const char *kernel_filename, const char *cpu_model) { - ARMCPU *cpu; - CPUARMState *env; - DeviceState *nvic; + DeviceState *armv7m; if (cpu_model == NULL) { - cpu_model = "cortex-m3"; + cpu_model = "cortex-m3"; } - cpu = cpu_arm_init(cpu_model); - if (cpu == NULL) { - fprintf(stderr, "Unable to find CPU definition\n"); - exit(1); - } - env = &cpu->env; - - armv7m_bitband_init(); - - nvic = qdev_create(NULL, "armv7m_nvic"); - qdev_prop_set_uint32(nvic, "num-irq", num_irq); - env->nvic = nvic; - qdev_init_nofail(nvic); - sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, - qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); - armv7m_load_kernel(cpu, kernel_filename, mem_size); - return nvic; + + armv7m = qdev_create(NULL, "armv7m"); + qdev_prop_set_uint32(armv7m, "num-irq", num_irq); + qdev_prop_set_string(armv7m, "cpu-model", cpu_model); + /* This will exit with an error if the user passed us a bad cpu_model */ + qdev_init_nofail(armv7m); + + armv7m_load_kernel(ARM_CPU(first_cpu), kernel_filename, mem_size); + return armv7m; } void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) -- 2.7.4 Make the ARMv7M object take a memory region link which it uses to wire up the bitband rather than having them always put themselves in the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-6-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 10 ++++++++++ hw/arm/armv7m.c | 23 ++++++++++++++++++++++- 2 files changed, 32 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * + Named GPIO output SYSRESETREQ: signalled for guest AIRCR.SYSRESETREQ * + Property "cpu-model": CPU model to instantiate * + Property "num-irq": number of external IRQ lines + * + Property "memory": MemoryRegion defining the physical address space + * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal + * devices will be automatically layered on top of this view.) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { BitBandState bitband[ARMV7M_NUM_BITBANDS]; ARMCPU *cpu; + /* MemoryRegion we pass to the CPU, with our devices layered on + * top of the ones the board provides in board_memory. + */ + MemoryRegion container; + /* Properties */ char *cpu_model; + /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ + MemoryRegion *board_memory; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ #include "elf.h" #include "sysemu/qtest.h" #include "qemu/error-report.h" +#include "exec/address-spaces.h" /* Bitbanded IO. Each word corresponds to a single bit. */ @@ -XXX,XX +XXX,XX @@ static void armv7m_instance_init(Object *obj) /* Can't init the cpu here, we don't yet know which model to use */ + object_property_add_link(obj, "memory", + TYPE_MEMORY_REGION, + (Object **)&s->board_memory, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + memory_region_init(&s->container, obj, "armv7m-container", UINT64_MAX); + object_initialize(&s->nvic, sizeof(s->nvic), "armv7m_nvic"); qdev_set_parent_bus(DEVICE(&s->nvic), sysbus_get_default()); object_property_add_alias(obj, "num-irq", @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) const char *typename; CPUClass *cc; + if (!s->board_memory) { + error_setg(errp, "memory property was not set"); + return; + } + + memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); + cpustr = g_strsplit(s->cpu_model, ",", 2); oc = cpu_class_by_name(TYPE_ARM_CPU, cpustr[0]); @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } + object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory", + &error_abort); object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } - sysbus_mmio_map(sbd, 0, bitband_output_addr[i]); + memory_region_add_subregion(&s->container, bitband_output_addr[i], + sysbus_mmio_get_region(sbd, 0)); } } @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, armv7m = qdev_create(NULL, "armv7m"); qdev_prop_set_uint32(armv7m, "num-irq", num_irq); qdev_prop_set_string(armv7m, "cpu-model", cpu_model); + object_property_set_link(OBJECT(armv7m), OBJECT(get_system_memory()), + "memory", &error_abort); /* This will exit with an error if the user passed us a bad cpu_model */ qdev_init_nofail(armv7m); -- 2.7.4 Make the NVIC device expose a memory region for its users to map, rather than mapping itself into the system memory space on realize, and get the one user (the ARMv7M object) to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-7-git-send-email-peter.maydell@linaro.org --- hw/arm/armv7m.c | 7 ++++++- hw/intc/armv7m_nvic.c | 7 ++----- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_instance_init(Object *obj) static void armv7m_realize(DeviceState *dev, Error **errp) { ARMv7MState *s = ARMV7M(dev); + SysBusDevice *sbd; Error *err = NULL; int i; char **cpustr; @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) qdev_pass_gpios(DEVICE(&s->nvic), dev, "SYSRESETREQ"); /* Wire the NVIC up to the CPU */ - sysbus_connect_irq(SYS_BUS_DEVICE(&s->nvic), 0, + sbd = SYS_BUS_DEVICE(&s->nvic); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); s->cpu->env.nvic = &s->nvic; + memory_region_add_subregion(&s->container, 0xe000e000, + sysbus_mmio_get_region(sbd, 0)); + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { Object *obj = OBJECT(&s->bitband[i]); SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" -#include "exec/address-spaces.h" #include "qemu/log.h" #include "trace.h" @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) "nvic_sysregs", 0x1000); memory_region_add_subregion(&s->container, 0, &s->sysregmem); - /* Map the whole thing into system memory at the location required - * by the v7M architecture. - */ - memory_region_add_subregion(get_system_memory(), 0xe000e000, &s->container); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container); + s->systick.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); } -- 2.7.4 Instead of the bitband device doing a cpu_physical_memory_read/write, make it take a MemoryRegion which specifies where it should be accessing, and use address_space_read/write to access the corresponding AddressSpace. Since this entails pretty much a rewrite, convert away from old_mmio in the process. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-8-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 2 + hw/arm/armv7m.c | 166 +++++++++++++++++++++++------------------------- 2 files changed, 81 insertions(+), 87 deletions(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { SysBusDevice parent_obj; /*< public >*/ + AddressSpace *source_as; MemoryRegion iomem; uint32_t base; + MemoryRegion *source_memory; } BitBandState; #define TYPE_ARMV7M "armv7m" diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ /* Bitbanded IO. Each word corresponds to a single bit. */ /* Get the byte address of the real memory for a bitband access. */ -static inline uint32_t bitband_addr(void * opaque, uint32_t addr) +static inline hwaddr bitband_addr(BitBandState *s, hwaddr offset) { - uint32_t res; - - res = *(uint32_t *)opaque; - res |= (addr & 0x1ffffff) >> 5; - return res; - -} - -static uint32_t bitband_readb(void *opaque, hwaddr offset) -{ - uint8_t v; - cpu_physical_memory_read(bitband_addr(opaque, offset), &v, 1); - return (v & (1 << ((offset >> 2) & 7))) != 0; -} - -static void bitband_writeb(void *opaque, hwaddr offset, - uint32_t value) -{ - uint32_t addr; - uint8_t mask; - uint8_t v; - addr = bitband_addr(opaque, offset); - mask = (1 << ((offset >> 2) & 7)); - cpu_physical_memory_read(addr, &v, 1); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 1); -} - -static uint32_t bitband_readw(void *opaque, hwaddr offset) -{ - uint32_t addr; - uint16_t mask; - uint16_t v; - addr = bitband_addr(opaque, offset) & ~1; - mask = (1 << ((offset >> 2) & 15)); - mask = tswap16(mask); - cpu_physical_memory_read(addr, &v, 2); - return (v & mask) != 0; -} - -static void bitband_writew(void *opaque, hwaddr offset, - uint32_t value) -{ - uint32_t addr; - uint16_t mask; - uint16_t v; - addr = bitband_addr(opaque, offset) & ~1; - mask = (1 << ((offset >> 2) & 15)); - mask = tswap16(mask); - cpu_physical_memory_read(addr, &v, 2); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 2); + return s->base | (offset & 0x1ffffff) >> 5; } -static uint32_t bitband_readl(void *opaque, hwaddr offset) +static MemTxResult bitband_read(void *opaque, hwaddr offset, + uint64_t *data, unsigned size, MemTxAttrs attrs) { - uint32_t addr; - uint32_t mask; - uint32_t v; - addr = bitband_addr(opaque, offset) & ~3; - mask = (1 << ((offset >> 2) & 31)); - mask = tswap32(mask); - cpu_physical_memory_read(addr, &v, 4); - return (v & mask) != 0; + BitBandState *s = opaque; + uint8_t buf[4]; + MemTxResult res; + int bitpos, bit; + hwaddr addr; + + assert(size <= 4); + + /* Find address in underlying memory and round down to multiple of size */ + addr = bitband_addr(s, offset) & (-size); + res = address_space_read(s->source_as, addr, attrs, buf, size); + if (res) { + return res; + } + /* Bit position in the N bytes read... */ + bitpos = (offset >> 2) & ((size * 8) - 1); + /* ...converted to byte in buffer and bit in byte */ + bit = (buf[bitpos >> 3] >> (bitpos & 7)) & 1; + *data = bit; + return MEMTX_OK; } -static void bitband_writel(void *opaque, hwaddr offset, - uint32_t value) +static MemTxResult bitband_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size, MemTxAttrs attrs) { - uint32_t addr; - uint32_t mask; - uint32_t v; - addr = bitband_addr(opaque, offset) & ~3; - mask = (1 << ((offset >> 2) & 31)); - mask = tswap32(mask); - cpu_physical_memory_read(addr, &v, 4); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 4); + BitBandState *s = opaque; + uint8_t buf[4]; + MemTxResult res; + int bitpos, bit; + hwaddr addr; + + assert(size <= 4); + + /* Find address in underlying memory and round down to multiple of size */ + addr = bitband_addr(s, offset) & (-size); + res = address_space_read(s->source_as, addr, attrs, buf, size); + if (res) { + return res; + } + /* Bit position in the N bytes read... */ + bitpos = (offset >> 2) & ((size * 8) - 1); + /* ...converted to byte in buffer and bit in byte */ + bit = 1 << (bitpos & 7); + if (value & 1) { + buf[bitpos >> 3] |= bit; + } else { + buf[bitpos >> 3] &= ~bit; + } + return address_space_write(s->source_as, addr, attrs, buf, size); } static const MemoryRegionOps bitband_ops = { - .old_mmio = { - .read = { bitband_readb, bitband_readw, bitband_readl, }, - .write = { bitband_writeb, bitband_writew, bitband_writel, }, - }, + .read_with_attrs = bitband_read, + .write_with_attrs = bitband_write, .endianness = DEVICE_NATIVE_ENDIAN, + .impl.min_access_size = 1, + .impl.max_access_size = 4, + .valid.min_access_size = 1, + .valid.max_access_size = 4, }; static void bitband_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void bitband_init(Object *obj) BitBandState *s = BITBAND(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); - memory_region_init_io(&s->iomem, obj, &bitband_ops, &s->base, + object_property_add_link(obj, "source-memory", + TYPE_MEMORY_REGION, + (Object **)&s->source_memory, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + memory_region_init_io(&s->iomem, obj, &bitband_ops, s, "bitband", 0x02000000); sysbus_init_mmio(dev, &s->iomem); } +static void bitband_realize(DeviceState *dev, Error **errp) +{ + BitBandState *s = BITBAND(dev); + + if (!s->source_memory) { + error_setg(errp, "source-memory property not set"); + return; + } + + s->source_as = address_space_init_shareable(s->source_memory, + "bitband-source"); +} + /* Board init. */ static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } + object_property_set_link(obj, OBJECT(s->board_memory), + "source-memory", &error_abort); object_property_set_bool(obj, true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void bitband_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = bitband_realize; dc->props = bitband_properties; } -- 2.7.4 The NVIC is a core v7M device that exists for all v7M CPUs; put it under a CONFIG_ARM_V7M rather than hiding it under CONFIG_STELLARIS. (We'll use CONFIG_ARM_V7M for the SysTick device too when we split it out of the NVIC.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org --- hw/intc/Makefile.objs | 2 +- default-configs/arm-softmmu.mak | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Makefile.objs +++ b/hw/intc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_APIC) += apic.o apic_common.o obj-$(CONFIG_ARM_GIC_KVM) += arm_gic_kvm.o obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_kvm.o obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_its_kvm.o -obj-$(CONFIG_STELLARIS) += armv7m_nvic.o +obj-$(CONFIG_ARM_V7M) += armv7m_nvic.o obj-$(CONFIG_EXYNOS4) += exynos4210_gic.o exynos4210_combiner.o obj-$(CONFIG_GRLIB) += grlib_irqmp.o obj-$(CONFIG_IOAPIC) += ioapic.o diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ARM11MPCORE=y CONFIG_A9MPCORE=y CONFIG_A15MPCORE=y +CONFIG_ARM_V7M=y + CONFIG_ARM_GIC=y CONFIG_ARM_GIC_KVM=$(CONFIG_KVM) CONFIG_ARM_TIMER=y -- 2.7.4 The SysTick timer isn't really part of the NVIC proper; we just modelled it that way back when we couldn't easily have devices that only occupied a small chunk of a memory region. Split it out into its own device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1487604965-23220-10-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/arm/armv7m_nvic.h | 10 +- include/hw/timer/armv7m_systick.h | 34 ++++++ hw/intc/armv7m_nvic.c | 160 ++++++------------------- hw/timer/armv7m_systick.c | 240 ++++++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 6 + 6 files changed, 318 insertions(+), 133 deletions(-) create mode 100644 include/hw/timer/armv7m_systick.h create mode 100644 hw/timer/armv7m_systick.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_ARM_TIMER) += arm_timer.o common-obj-$(CONFIG_ARM_MPTIMER) += arm_mptimer.o +common-obj-$(CONFIG_ARM_V7M) += armv7m_systick.o common-obj-$(CONFIG_A9_GTIMER) += a9gtimer.o common-obj-$(CONFIG_CADENCE) += cadence_ttc.o common-obj-$(CONFIG_DS1338) += ds1338.o diff --git a/include/hw/arm/armv7m_nvic.h b/include/hw/arm/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m_nvic.h +++ b/include/hw/arm/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/sysbus.h" +#include "hw/timer/armv7m_systick.h" #define TYPE_NVIC "armv7m_nvic" @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { unsigned int vectpending; /* highest prio pending enabled exception */ int exception_prio; /* group prio of the highest prio active exception */ - struct { - uint32_t control; - uint32_t reload; - int64_t tick; - QEMUTimer *timer; - } systick; - MemoryRegion sysregmem; MemoryRegion container; uint32_t num_irq; qemu_irq excpout; qemu_irq sysresetreq; + + SysTickState systick; } NVICState; #endif diff --git a/include/hw/timer/armv7m_systick.h b/include/hw/timer/armv7m_systick.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/armv7m_systick.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M SysTick timer + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell + * + * This code is licensed under the GPL (version 2 or later). + */ + +#ifndef HW_TIMER_ARMV7M_SYSTICK_H +#define HW_TIMER_ARMV7M_SYSTICK_H + +#include "hw/sysbus.h" + +#define TYPE_SYSTICK "armv7m_systick" + +#define SYSTICK(obj) OBJECT_CHECK(SysTickState, (obj), TYPE_SYSTICK) + +typedef struct SysTickState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + uint32_t control; + uint32_t reload; + int64_t tick; + QEMUTimer *timer; + MemoryRegion iomem; + qemu_irq irq; +} SysTickState; + +#endif diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 }; -/* qemu timers run at 1GHz. We want something closer to 1MHz. */ -#define SYSTICK_SCALE 1000ULL - -#define SYSTICK_ENABLE (1 << 0) -#define SYSTICK_TICKINT (1 << 1) -#define SYSTICK_CLKSOURCE (1 << 2) -#define SYSTICK_COUNTFLAG (1 << 16) - -int system_clock_scale; - -/* Conversion factor from qemu timer to SysTick frequencies. */ -static inline int64_t systick_scale(NVICState *s) -{ - if (s->systick.control & SYSTICK_CLKSOURCE) - return system_clock_scale; - else - return 1000; -} - -static void systick_reload(NVICState *s, int reset) -{ - /* The Cortex-M3 Devices Generic User Guide says that "When the - * ENABLE bit is set to 1, the counter loads the RELOAD value from the - * SYST RVR register and then counts down". So, we need to check the - * ENABLE bit before reloading the value. - */ - if ((s->systick.control & SYSTICK_ENABLE) == 0) { - return; - } - - if (reset) - s->systick.tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - s->systick.tick += (s->systick.reload + 1) * systick_scale(s); - timer_mod(s->systick.timer, s->systick.tick); -} - -static void systick_timer_tick(void * opaque) -{ - NVICState *s = (NVICState *)opaque; - s->systick.control |= SYSTICK_COUNTFLAG; - if (s->systick.control & SYSTICK_TICKINT) { - /* Trigger the interrupt. */ - armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); - } - if (s->systick.reload == 0) { - s->systick.control &= ~SYSTICK_ENABLE; - } else { - systick_reload(s, 0); - } -} - -static void systick_reset(NVICState *s) -{ - s->systick.control = 0; - s->systick.reload = 0; - s->systick.tick = 0; - timer_del(s->systick.timer); -} - static int nvic_pending_prio(NVICState *s) { /* return the priority of the current pending interrupt, @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) switch (offset) { case 4: /* Interrupt Control Type. */ return ((s->num_irq - NVIC_FIRST_IRQ) / 32) - 1; - case 0x10: /* SysTick Control and Status. */ - val = s->systick.control; - s->systick.control &= ~SYSTICK_COUNTFLAG; - return val; - case 0x14: /* SysTick Reload Value. */ - return s->systick.reload; - case 0x18: /* SysTick Current Value. */ - { - int64_t t; - if ((s->systick.control & SYSTICK_ENABLE) == 0) - return 0; - t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (t >= s->systick.tick) - return 0; - val = ((s->systick.tick - (t + 1)) / systick_scale(s)) + 1; - /* The interrupt in triggered when the timer reaches zero. - However the counter is not reloaded until the next clock - tick. This is a hack to return zero during the first tick. */ - if (val > s->systick.reload) - val = 0; - return val; - } - case 0x1c: /* SysTick Calibration Value. */ - return 10000; case 0xd00: /* CPUID Base. */ return cpu->midr; case 0xd04: /* Interrupt Control State. */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) { ARMCPU *cpu = s->cpu; - uint32_t oldval; + switch (offset) { - case 0x10: /* SysTick Control and Status. */ - oldval = s->systick.control; - s->systick.control &= 0xfffffff8; - s->systick.control |= value & 7; - if ((oldval ^ value) & SYSTICK_ENABLE) { - int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (value & SYSTICK_ENABLE) { - if (s->systick.tick) { - s->systick.tick += now; - timer_mod(s->systick.timer, s->systick.tick); - } else { - systick_reload(s, 1); - } - } else { - timer_del(s->systick.timer); - s->systick.tick -= now; - if (s->systick.tick < 0) - s->systick.tick = 0; - } - } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { - /* This is a hack. Force the timer to be reloaded - when the reference clock is changed. */ - systick_reload(s, 1); - } - break; - case 0x14: /* SysTick Reload Value. */ - s->systick.reload = value; - break; - case 0x18: /* SysTick Current Value. Writes reload the timer. */ - systick_reload(s, 1); - s->systick.control &= ~SYSTICK_COUNTFLAG; - break; case 0xd04: /* Interrupt Control State. */ if (value & (1 << 31)) { armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_VecInfo = { static const VMStateDescription vmstate_nvic = { .name = "armv7m_nvic", - .version_id = 3, - .minimum_version_id = 3, + .version_id = 4, + .minimum_version_id = 4, .post_load = &nvic_post_load, .fields = (VMStateField[]) { VMSTATE_STRUCT_ARRAY(vectors, NVICState, NVIC_MAX_VECTORS, 1, vmstate_VecInfo, VecInfo), - VMSTATE_UINT32(systick.control, NVICState), - VMSTATE_UINT32(systick.reload, NVICState), - VMSTATE_INT64(systick.tick, NVICState), - VMSTATE_TIMER_PTR(systick.timer, NVICState), VMSTATE_UINT32(prigroup, NVICState), VMSTATE_END_OF_LIST() } @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->exception_prio = NVIC_NOEXC_PRIO; s->vectpending = 0; +} - systick_reset(s); +static void nvic_systick_trigger(void *opaque, int n, int level) +{ + NVICState *s = opaque; + + if (level) { + /* SysTick just asked us to pend its exception. + * (This is different from an external interrupt line's + * behaviour.) + */ + armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); + } } static void armv7m_nvic_realize(DeviceState *dev, Error **errp) { NVICState *s = NVIC(dev); + SysBusDevice *systick_sbd; + Error *err = NULL; s->cpu = ARM_CPU(qemu_get_cpu(0)); assert(s->cpu); @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) /* include space for internal exception vectors */ s->num_irq += NVIC_FIRST_IRQ; + object_property_set_bool(OBJECT(&s->systick), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + systick_sbd = SYS_BUS_DEVICE(&s->systick); + sysbus_connect_irq(systick_sbd, 0, + qdev_get_gpio_in_named(dev, "systick-trigger", 0)); + /* The NVIC and System Control Space (SCS) starts at 0xe000e000 * and looks like this: * 0x004 - ICTR - * 0x010 - 0x1c - systick + * 0x010 - 0xff - systick * 0x100..0x7ec - NVIC * 0x7f0..0xcff - Reserved * 0xd00..0xd3c - SCS registers @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) memory_region_init_io(&s->sysregmem, OBJECT(s), &nvic_sysreg_ops, s, "nvic_sysregs", 0x1000); memory_region_add_subregion(&s->container, 0, &s->sysregmem); + memory_region_add_subregion_overlap(&s->container, 0x10, + sysbus_mmio_get_region(systick_sbd, 0), + 1); sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container); - - s->systick.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); } static void armv7m_nvic_instance_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_instance_init(Object *obj) NVICState *nvic = NVIC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + object_initialize(&nvic->systick, sizeof(nvic->systick), TYPE_SYSTICK); + qdev_set_parent_bus(DEVICE(&nvic->systick), sysbus_get_default()); + sysbus_init_irq(sbd, &nvic->excpout); qdev_init_gpio_out_named(dev, &nvic->sysresetreq, "SYSRESETREQ", 1); + qdev_init_gpio_in_named(dev, nvic_systick_trigger, "systick-trigger", 1); } static void armv7m_nvic_class_init(ObjectClass *klass, void *data) diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/armv7m_systick.c @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M SysTick timer + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell + * + * This code is licensed under the GPL (version 2 or later). + */ + +#include "qemu/osdep.h" +#include "hw/timer/armv7m_systick.h" +#include "qemu-common.h" +#include "hw/sysbus.h" +#include "qemu/timer.h" +#include "qemu/log.h" +#include "trace.h" + +/* qemu timers run at 1GHz. We want something closer to 1MHz. */ +#define SYSTICK_SCALE 1000ULL + +#define SYSTICK_ENABLE (1 << 0) +#define SYSTICK_TICKINT (1 << 1) +#define SYSTICK_CLKSOURCE (1 << 2) +#define SYSTICK_COUNTFLAG (1 << 16) + +int system_clock_scale; + +/* Conversion factor from qemu timer to SysTick frequencies. */ +static inline int64_t systick_scale(SysTickState *s) +{ + if (s->control & SYSTICK_CLKSOURCE) { + return system_clock_scale; + } else { + return 1000; + } +} + +static void systick_reload(SysTickState *s, int reset) +{ + /* The Cortex-M3 Devices Generic User Guide says that "When the + * ENABLE bit is set to 1, the counter loads the RELOAD value from the + * SYST RVR register and then counts down". So, we need to check the + * ENABLE bit before reloading the value. + */ + trace_systick_reload(); + + if ((s->control & SYSTICK_ENABLE) == 0) { + return; + } + + if (reset) { + s->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + } + s->tick += (s->reload + 1) * systick_scale(s); + timer_mod(s->timer, s->tick); +} + +static void systick_timer_tick(void *opaque) +{ + SysTickState *s = (SysTickState *)opaque; + + trace_systick_timer_tick(); + + s->control |= SYSTICK_COUNTFLAG; + if (s->control & SYSTICK_TICKINT) { + /* Tell the NVIC to pend the SysTick exception */ + qemu_irq_pulse(s->irq); + } + if (s->reload == 0) { + s->control &= ~SYSTICK_ENABLE; + } else { + systick_reload(s, 0); + } +} + +static uint64_t systick_read(void *opaque, hwaddr addr, unsigned size) +{ + SysTickState *s = opaque; + uint32_t val; + + switch (addr) { + case 0x0: /* SysTick Control and Status. */ + val = s->control; + s->control &= ~SYSTICK_COUNTFLAG; + break; + case 0x4: /* SysTick Reload Value. */ + val = s->reload; + break; + case 0x8: /* SysTick Current Value. */ + { + int64_t t; + + if ((s->control & SYSTICK_ENABLE) == 0) { + val = 0; + break; + } + t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + if (t >= s->tick) { + val = 0; + break; + } + val = ((s->tick - (t + 1)) / systick_scale(s)) + 1; + /* The interrupt in triggered when the timer reaches zero. + However the counter is not reloaded until the next clock + tick. This is a hack to return zero during the first tick. */ + if (val > s->reload) { + val = 0; + } + break; + } + case 0xc: /* SysTick Calibration Value. */ + val = 10000; + break; + default: + val = 0; + qemu_log_mask(LOG_GUEST_ERROR, + "SysTick: Bad read offset 0x%" HWADDR_PRIx "\n", addr); + break; + } + + trace_systick_read(addr, val, size); + return val; +} + +static void systick_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + SysTickState *s = opaque; + + trace_systick_write(addr, value, size); + + switch (addr) { + case 0x0: /* SysTick Control and Status. */ + { + uint32_t oldval = s->control; + + s->control &= 0xfffffff8; + s->control |= value & 7; + if ((oldval ^ value) & SYSTICK_ENABLE) { + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + if (value & SYSTICK_ENABLE) { + if (s->tick) { + s->tick += now; + timer_mod(s->timer, s->tick); + } else { + systick_reload(s, 1); + } + } else { + timer_del(s->timer); + s->tick -= now; + if (s->tick < 0) { + s->tick = 0; + } + } + } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { + /* This is a hack. Force the timer to be reloaded + when the reference clock is changed. */ + systick_reload(s, 1); + } + break; + } + case 0x4: /* SysTick Reload Value. */ + s->reload = value; + break; + case 0x8: /* SysTick Current Value. Writes reload the timer. */ + systick_reload(s, 1); + s->control &= ~SYSTICK_COUNTFLAG; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "SysTick: Bad write offset 0x%" HWADDR_PRIx "\n", addr); + } +} + +static const MemoryRegionOps systick_ops = { + .read = systick_read, + .write = systick_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static void systick_reset(DeviceState *dev) +{ + SysTickState *s = SYSTICK(dev); + + s->control = 0; + s->reload = 0; + s->tick = 0; + timer_del(s->timer); +} + +static void systick_instance_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + SysTickState *s = SYSTICK(obj); + + memory_region_init_io(&s->iomem, obj, &systick_ops, s, "systick", 0xe0); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); + s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); +} + +static const VMStateDescription vmstate_systick = { + .name = "armv7m_systick", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(control, SysTickState), + VMSTATE_UINT32(reload, SysTickState), + VMSTATE_INT64(tick, SysTickState), + VMSTATE_TIMER_PTR(timer, SysTickState), + VMSTATE_END_OF_LIST() + } +}; + +static void systick_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_systick; + dc->reset = systick_reset; +} + +static const TypeInfo armv7m_systick_info = { + .name = TYPE_SYSTICK, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = systick_instance_init, + .instance_size = sizeof(SysTickState), + .class_init = systick_class_init, +}; + +static void armv7m_systick_register_types(void) +{ + type_register_static(&armv7m_systick_info); +} + +type_init(armv7m_systick_register_types) diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ aspeed_timer_ctrl_pulse_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" aspeed_timer_set_ctrl2(uint32_t value) "Value: 0x%" PRIx32 aspeed_timer_set_value(int timer, int reg, uint32_t value) "Timer %d register %d: 0x%" PRIx32 aspeed_timer_read(uint64_t offset, unsigned size, uint64_t value) "From 0x%" PRIx64 ": of size %u: 0x%" PRIx64 + +# hw/timer/armv7m_systick.c +systick_reload(void) "systick reload" +systick_timer_tick(void) "systick reload" +systick_read(uint64_t addr, uint32_t value, unsigned size) "systick read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" +systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" -- 2.7.4 Switch the stm32f205 SoC to create the armv7m object directly rather than via the armv7m_init() wrapper. This fits better with the SoC model's very QOMified design. In particular this means we can push loading the guest image out to the top level board code where it belongs, rather than the SoC object having a QOM property for the filename to load. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-11-git-send-email-peter.maydell@linaro.org --- include/hw/arm/stm32f205_soc.h | 4 +++- hw/arm/netduino2.c | 7 ++++--- hw/arm/stm32f205_soc.c | 16 +++++++++++++--- 3 files changed, 20 insertions(+), 7 deletions(-) diff --git a/include/hw/arm/stm32f205_soc.h b/include/hw/arm/stm32f205_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32f205_soc.h +++ b/include/hw/arm/stm32f205_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/adc/stm32f2xx_adc.h" #include "hw/or-irq.h" #include "hw/ssi/stm32f2xx_spi.h" +#include "hw/arm/armv7m.h" #define TYPE_STM32F205_SOC "stm32f205-soc" #define STM32F205_SOC(obj) \ @@ -XXX,XX +XXX,XX @@ typedef struct STM32F205State { SysBusDevice parent_obj; /*< public >*/ - char *kernel_filename; char *cpu_model; + ARMv7MState armv7m; + STM32F2XXSyscfgState syscfg; STM32F2XXUsartState usart[STM_NUM_USARTS]; STM32F2XXTimerState timer[STM_NUM_TIMERS]; diff --git a/hw/arm/netduino2.c b/hw/arm/netduino2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/netduino2.c +++ b/hw/arm/netduino2.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "qemu/error-report.h" #include "hw/arm/stm32f205_soc.h" +#include "hw/arm/arm.h" static void netduino2_init(MachineState *machine) { DeviceState *dev; dev = qdev_create(NULL, TYPE_STM32F205_SOC); - if (machine->kernel_filename) { - qdev_prop_set_string(dev, "kernel-filename", machine->kernel_filename); - } qdev_prop_set_string(dev, "cpu-model", "cortex-m3"); object_property_set_bool(OBJECT(dev), true, "realized", &error_fatal); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, + FLASH_SIZE); } static void netduino2_machine_init(MachineClass *mc) diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_initfn(Object *obj) STM32F205State *s = STM32F205_SOC(obj); int i; + object_initialize(&s->armv7m, sizeof(s->armv7m), TYPE_ARMV7M); + qdev_set_parent_bus(DEVICE(&s->armv7m), sysbus_get_default()); + object_initialize(&s->syscfg, sizeof(s->syscfg), TYPE_STM32F2XX_SYSCFG); qdev_set_parent_bus(DEVICE(&s->syscfg), sysbus_get_default()); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) vmstate_register_ram_global(sram); memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); - nvic = armv7m_init(get_system_memory(), FLASH_SIZE, 96, - s->kernel_filename, s->cpu_model); + nvic = DEVICE(&s->armv7m); + qdev_prop_set_uint32(nvic, "num-irq", 96); + qdev_prop_set_string(nvic, "cpu-model", s->cpu_model); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), + "memory", &error_abort); + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } /* System configuration controller */ dev = DEVICE(&s->syscfg); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } static Property stm32f205_soc_properties[] = { - DEFINE_PROP_STRING("kernel-filename", STM32F205State, kernel_filename), DEFINE_PROP_STRING("cpu-model", STM32F205State, cpu_model), DEFINE_PROP_END_OF_LIST(), }; -- 2.7.4 The local variable 'nvic' in stm32f205_soc_realize() no longer holds a direct pointer to the NVIC device; it is a pointer to the ARMv7M container object. Rename it 'armv7m' accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-12-git-send-email-peter.maydell@linaro.org --- hw/arm/stm32f205_soc.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_initfn(Object *obj) static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) { STM32F205State *s = STM32F205_SOC(dev_soc); - DeviceState *dev, *nvic; + DeviceState *dev, *armv7m; SysBusDevice *busdev; Error *err = NULL; int i; @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) vmstate_register_ram_global(sram); memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); - nvic = DEVICE(&s->armv7m); - qdev_prop_set_uint32(nvic, "num-irq", 96); - qdev_prop_set_string(nvic, "cpu-model", s->cpu_model); + armv7m = DEVICE(&s->armv7m); + qdev_prop_set_uint32(armv7m, "num-irq", 96); + qdev_prop_set_string(armv7m, "cpu-model", s->cpu_model); object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), "memory", &error_abort); object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, 0x40013800); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, 71)); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, 71)); /* Attach UART (uses USART registers) and USART controllers */ for (i = 0; i < STM_NUM_USARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, usart_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, usart_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, usart_irq[i])); } /* Timer 2 to 5 */ @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, timer_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, timer_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, timer_irq[i])); } /* ADC 1 to 3 */ @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) return; } qdev_connect_gpio_out(DEVICE(s->adc_irqs), 0, - qdev_get_gpio_in(nvic, ADC_IRQ)); + qdev_get_gpio_in(armv7m, ADC_IRQ)); for (i = 0; i < STM_NUM_ADCS; i++) { dev = DEVICE(&(s->adc[i])); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, spi_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, spi_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, spi_irq[i])); } } -- 2.7.4 From: Paolo Bonzini <pbonzini@redhat.com> The linux-headers/asm-arm/unistd.h file has been split in three sub-files, copy them along. However, building them requires setting ARCH rather than SRCARCH. SRCARCH defaults to $(ARCH) anyway; to avoid future occurrence of the same problem use ARCH for all architectures where SRCARCH=ARCH. Currently these are all except x86, sparc, sh and tile. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20170221122920.16245-2-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- scripts/update-linux-headers.sh | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh index XXXXXXX..XXXXXXX 100755 --- a/scripts/update-linux-headers.sh +++ b/scripts/update-linux-headers.sh @@ -XXX,XX +XXX,XX @@ for arch in $ARCHLIST; do continue fi - make -C "$linux" INSTALL_HDR_PATH="$tmpdir" SRCARCH=$arch headers_install + if [ "$arch" = x86 ]; then + arch_var=SRCARCH + else + arch_var=ARCH + fi + + make -C "$linux" INSTALL_HDR_PATH="$tmpdir" $arch_var=$arch headers_install rm -rf "$output/linux-headers/asm-$arch" mkdir -p "$output/linux-headers/asm-$arch" @@ -XXX,XX +XXX,XX @@ for arch in $ARCHLIST; do cp_portable "$tmpdir/include/asm/kvm_virtio.h" "$output/include/standard-headers/asm-s390/" cp_portable "$tmpdir/include/asm/virtio-ccw.h" "$output/include/standard-headers/asm-s390/" fi + if [ $arch = arm ]; then + cp "$tmpdir/include/asm/unistd-eabi.h" "$output/linux-headers/asm-arm/" + cp "$tmpdir/include/asm/unistd-oabi.h" "$output/linux-headers/asm-arm/" + cp "$tmpdir/include/asm/unistd-common.h" "$output/linux-headers/asm-arm/" + fi if [ $arch = x86 ]; then cp_portable "$tmpdir/include/asm/hyperv.h" "$output/include/standard-headers/asm-x86/" cp "$tmpdir/include/asm/unistd_32.h" "$output/linux-headers/asm-x86/" -- 2.7.4 From: Paolo Bonzini <pbonzini@redhat.com> virtio_mmio.h would be deleted; I am leaving it in though it was a mistake to add it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/standard-headers/asm-x86/hyperv.h | 8 + include/standard-headers/linux/input-event-codes.h | 2 +- include/standard-headers/linux/pci_regs.h | 25 ++ include/standard-headers/linux/virtio_ids.h | 1 + linux-headers/asm-arm/kvm.h | 15 + linux-headers/asm-arm/unistd-common.h | 357 ++++++++++++++++++ linux-headers/asm-arm/unistd-eabi.h | 5 + linux-headers/asm-arm/unistd-oabi.h | 17 + linux-headers/asm-arm/unistd.h | 419 +-------------------- linux-headers/asm-arm64/kvm.h | 13 + linux-headers/asm-powerpc/kvm.h | 27 ++ linux-headers/asm-powerpc/unistd.h | 1 + linux-headers/asm-x86/kvm_para.h | 13 +- linux-headers/linux/kvm.h | 24 +- linux-headers/linux/kvm_para.h | 2 + linux-headers/linux/userfaultfd.h | 67 +++- linux-headers/linux/vfio.h | 10 + 17 files changed, 577 insertions(+), 429 deletions(-) create mode 100644 linux-headers/asm-arm/unistd-common.h create mode 100644 linux-headers/asm-arm/unistd-eabi.h create mode 100644 linux-headers/asm-arm/unistd-oabi.h diff --git a/include/standard-headers/asm-x86/hyperv.h b/include/standard-headers/asm-x86/hyperv.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/asm-x86/hyperv.h +++ b/include/standard-headers/asm-x86/hyperv.h @@ -XXX,XX +XXX,XX @@ */ #define HV_X64_MSR_STAT_PAGES_AVAILABLE (1 << 8) +/* Crash MSR available */ +#define HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE (1 << 10) + /* * Feature identification: EBX indicates which flags were specified at * partition creation. The format is the same as the partition creation @@ -XXX,XX +XXX,XX @@ */ #define HV_X64_RELAXED_TIMING_RECOMMENDED (1 << 5) +/* + * Crash notification flag. + */ +#define HV_CRASH_CTL_CRASH_NOTIFY (1ULL << 63) + /* MSR used to identify the guest OS. */ #define HV_X64_MSR_GUEST_OS_ID 0x40000000 diff --git a/include/standard-headers/linux/input-event-codes.h b/include/standard-headers/linux/input-event-codes.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/input-event-codes.h +++ b/include/standard-headers/linux/input-event-codes.h @@ -XXX,XX +XXX,XX @@ * Control a data application associated with the currently viewed channel, * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.) */ -#define KEY_DATA 0x275 +#define KEY_DATA 0x277 #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -XXX,XX +XXX,XX @@ #define LINUX_PCI_REGS_H /* + * Conventional PCI and PCI-X Mode 1 devices have 256 bytes of + * configuration space. PCI-X Mode 2 and PCIe devices have 4096 bytes of + * configuration space. + */ +#define PCI_CFG_SPACE_SIZE 256 +#define PCI_CFG_SPACE_EXP_SIZE 4096 + +/* * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */ @@ -XXX,XX +XXX,XX @@ #define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ #define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ #define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */ +#define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */ #define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */ #define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PTM @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_DPC_STATUS 8 /* DPC Status */ #define PCI_EXP_DPC_STATUS_TRIGGER 0x01 /* Trigger Status */ #define PCI_EXP_DPC_STATUS_INTERRUPT 0x08 /* Interrupt Status */ +#define PCI_EXP_DPC_RP_BUSY 0x10 /* Root Port Busy */ #define PCI_EXP_DPC_SOURCE_ID 10 /* DPC Source Identifier */ @@ -XXX,XX +XXX,XX @@ #define PCI_PTM_CTRL_ENABLE 0x00000001 /* PTM enable */ #define PCI_PTM_CTRL_ROOT 0x00000002 /* Root select */ +/* L1 PM Substates */ +#define PCI_L1SS_CAP 4 /* capability register */ +#define PCI_L1SS_CAP_PCIPM_L1_2 1 /* PCI PM L1.2 Support */ +#define PCI_L1SS_CAP_PCIPM_L1_1 2 /* PCI PM L1.1 Support */ +#define PCI_L1SS_CAP_ASPM_L1_2 4 /* ASPM L1.2 Support */ +#define PCI_L1SS_CAP_ASPM_L1_1 8 /* ASPM L1.1 Support */ +#define PCI_L1SS_CAP_L1_PM_SS 16 /* L1 PM Substates Support */ +#define PCI_L1SS_CTL1 8 /* Control Register 1 */ +#define PCI_L1SS_CTL1_PCIPM_L1_2 1 /* PCI PM L1.2 Enable */ +#define PCI_L1SS_CTL1_PCIPM_L1_1 2 /* PCI PM L1.1 Support */ +#define PCI_L1SS_CTL1_ASPM_L1_2 4 /* ASPM L1.2 Support */ +#define PCI_L1SS_CTL1_ASPM_L1_1 8 /* ASPM L1.1 Support */ +#define PCI_L1SS_CTL1_L1SS_MASK 0x0000000F +#define PCI_L1SS_CTL2 0xC /* Control Register 2 */ + #endif /* LINUX_PCI_REGS_H */ diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/virtio_ids.h +++ b/include/standard-headers/linux/virtio_ids.h @@ -XXX,XX +XXX,XX @@ #define VIRTIO_ID_INPUT 18 /* virtio input */ #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ #define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ + #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/linux-headers/asm-arm/kvm.h b/linux-headers/asm-arm/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm/kvm.h +++ b/linux-headers/asm-arm/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_regs { /* Supported VGICv3 address types */ #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 +#define KVM_VGIC_ITS_ADDR_TYPE 4 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) +#define KVM_VGIC_V3_ITS_SIZE (2 * SZ_64K) #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ #define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */ @@ -XXX,XX +XXX,XX @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 #define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 +#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ + (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) #define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 #define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 +#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 +#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ + (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff +#define VGIC_LEVEL_INFO_LINE_LEVEL 0 + #define KVM_DEV_ARM_VGIC_CTRL_INIT 0 /* KVM_IRQ_LINE irq field index values */ diff --git a/linux-headers/asm-arm/unistd-common.h b/linux-headers/asm-arm/unistd-common.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-common.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_COMMON_H +#define _ASM_ARM_UNISTD_COMMON_H 1 + +#define __NR_restart_syscall (__NR_SYSCALL_BASE + 0) +#define __NR_exit (__NR_SYSCALL_BASE + 1) +#define __NR_fork (__NR_SYSCALL_BASE + 2) +#define __NR_read (__NR_SYSCALL_BASE + 3) +#define __NR_write (__NR_SYSCALL_BASE + 4) +#define __NR_open (__NR_SYSCALL_BASE + 5) +#define __NR_close (__NR_SYSCALL_BASE + 6) +#define __NR_creat (__NR_SYSCALL_BASE + 8) +#define __NR_link (__NR_SYSCALL_BASE + 9) +#define __NR_unlink (__NR_SYSCALL_BASE + 10) +#define __NR_execve (__NR_SYSCALL_BASE + 11) +#define __NR_chdir (__NR_SYSCALL_BASE + 12) +#define __NR_mknod (__NR_SYSCALL_BASE + 14) +#define __NR_chmod (__NR_SYSCALL_BASE + 15) +#define __NR_lchown (__NR_SYSCALL_BASE + 16) +#define __NR_lseek (__NR_SYSCALL_BASE + 19) +#define __NR_getpid (__NR_SYSCALL_BASE + 20) +#define __NR_mount (__NR_SYSCALL_BASE + 21) +#define __NR_setuid (__NR_SYSCALL_BASE + 23) +#define __NR_getuid (__NR_SYSCALL_BASE + 24) +#define __NR_ptrace (__NR_SYSCALL_BASE + 26) +#define __NR_pause (__NR_SYSCALL_BASE + 29) +#define __NR_access (__NR_SYSCALL_BASE + 33) +#define __NR_nice (__NR_SYSCALL_BASE + 34) +#define __NR_sync (__NR_SYSCALL_BASE + 36) +#define __NR_kill (__NR_SYSCALL_BASE + 37) +#define __NR_rename (__NR_SYSCALL_BASE + 38) +#define __NR_mkdir (__NR_SYSCALL_BASE + 39) +#define __NR_rmdir (__NR_SYSCALL_BASE + 40) +#define __NR_dup (__NR_SYSCALL_BASE + 41) +#define __NR_pipe (__NR_SYSCALL_BASE + 42) +#define __NR_times (__NR_SYSCALL_BASE + 43) +#define __NR_brk (__NR_SYSCALL_BASE + 45) +#define __NR_setgid (__NR_SYSCALL_BASE + 46) +#define __NR_getgid (__NR_SYSCALL_BASE + 47) +#define __NR_geteuid (__NR_SYSCALL_BASE + 49) +#define __NR_getegid (__NR_SYSCALL_BASE + 50) +#define __NR_acct (__NR_SYSCALL_BASE + 51) +#define __NR_umount2 (__NR_SYSCALL_BASE + 52) +#define __NR_ioctl (__NR_SYSCALL_BASE + 54) +#define __NR_fcntl (__NR_SYSCALL_BASE + 55) +#define __NR_setpgid (__NR_SYSCALL_BASE + 57) +#define __NR_umask (__NR_SYSCALL_BASE + 60) +#define __NR_chroot (__NR_SYSCALL_BASE + 61) +#define __NR_ustat (__NR_SYSCALL_BASE + 62) +#define __NR_dup2 (__NR_SYSCALL_BASE + 63) +#define __NR_getppid (__NR_SYSCALL_BASE + 64) +#define __NR_getpgrp (__NR_SYSCALL_BASE + 65) +#define __NR_setsid (__NR_SYSCALL_BASE + 66) +#define __NR_sigaction (__NR_SYSCALL_BASE + 67) +#define __NR_setreuid (__NR_SYSCALL_BASE + 70) +#define __NR_setregid (__NR_SYSCALL_BASE + 71) +#define __NR_sigsuspend (__NR_SYSCALL_BASE + 72) +#define __NR_sigpending (__NR_SYSCALL_BASE + 73) +#define __NR_sethostname (__NR_SYSCALL_BASE + 74) +#define __NR_setrlimit (__NR_SYSCALL_BASE + 75) +#define __NR_getrusage (__NR_SYSCALL_BASE + 77) +#define __NR_gettimeofday (__NR_SYSCALL_BASE + 78) +#define __NR_settimeofday (__NR_SYSCALL_BASE + 79) +#define __NR_getgroups (__NR_SYSCALL_BASE + 80) +#define __NR_setgroups (__NR_SYSCALL_BASE + 81) +#define __NR_symlink (__NR_SYSCALL_BASE + 83) +#define __NR_readlink (__NR_SYSCALL_BASE + 85) +#define __NR_uselib (__NR_SYSCALL_BASE + 86) +#define __NR_swapon (__NR_SYSCALL_BASE + 87) +#define __NR_reboot (__NR_SYSCALL_BASE + 88) +#define __NR_munmap (__NR_SYSCALL_BASE + 91) +#define __NR_truncate (__NR_SYSCALL_BASE + 92) +#define __NR_ftruncate (__NR_SYSCALL_BASE + 93) +#define __NR_fchmod (__NR_SYSCALL_BASE + 94) +#define __NR_fchown (__NR_SYSCALL_BASE + 95) +#define __NR_getpriority (__NR_SYSCALL_BASE + 96) +#define __NR_setpriority (__NR_SYSCALL_BASE + 97) +#define __NR_statfs (__NR_SYSCALL_BASE + 99) +#define __NR_fstatfs (__NR_SYSCALL_BASE + 100) +#define __NR_syslog (__NR_SYSCALL_BASE + 103) +#define __NR_setitimer (__NR_SYSCALL_BASE + 104) +#define __NR_getitimer (__NR_SYSCALL_BASE + 105) +#define __NR_stat (__NR_SYSCALL_BASE + 106) +#define __NR_lstat (__NR_SYSCALL_BASE + 107) +#define __NR_fstat (__NR_SYSCALL_BASE + 108) +#define __NR_vhangup (__NR_SYSCALL_BASE + 111) +#define __NR_wait4 (__NR_SYSCALL_BASE + 114) +#define __NR_swapoff (__NR_SYSCALL_BASE + 115) +#define __NR_sysinfo (__NR_SYSCALL_BASE + 116) +#define __NR_fsync (__NR_SYSCALL_BASE + 118) +#define __NR_sigreturn (__NR_SYSCALL_BASE + 119) +#define __NR_clone (__NR_SYSCALL_BASE + 120) +#define __NR_setdomainname (__NR_SYSCALL_BASE + 121) +#define __NR_uname (__NR_SYSCALL_BASE + 122) +#define __NR_adjtimex (__NR_SYSCALL_BASE + 124) +#define __NR_mprotect (__NR_SYSCALL_BASE + 125) +#define __NR_sigprocmask (__NR_SYSCALL_BASE + 126) +#define __NR_init_module (__NR_SYSCALL_BASE + 128) +#define __NR_delete_module (__NR_SYSCALL_BASE + 129) +#define __NR_quotactl (__NR_SYSCALL_BASE + 131) +#define __NR_getpgid (__NR_SYSCALL_BASE + 132) +#define __NR_fchdir (__NR_SYSCALL_BASE + 133) +#define __NR_bdflush (__NR_SYSCALL_BASE + 134) +#define __NR_sysfs (__NR_SYSCALL_BASE + 135) +#define __NR_personality (__NR_SYSCALL_BASE + 136) +#define __NR_setfsuid (__NR_SYSCALL_BASE + 138) +#define __NR_setfsgid (__NR_SYSCALL_BASE + 139) +#define __NR__llseek (__NR_SYSCALL_BASE + 140) +#define __NR_getdents (__NR_SYSCALL_BASE + 141) +#define __NR__newselect (__NR_SYSCALL_BASE + 142) +#define __NR_flock (__NR_SYSCALL_BASE + 143) +#define __NR_msync (__NR_SYSCALL_BASE + 144) +#define __NR_readv (__NR_SYSCALL_BASE + 145) +#define __NR_writev (__NR_SYSCALL_BASE + 146) +#define __NR_getsid (__NR_SYSCALL_BASE + 147) +#define __NR_fdatasync (__NR_SYSCALL_BASE + 148) +#define __NR__sysctl (__NR_SYSCALL_BASE + 149) +#define __NR_mlock (__NR_SYSCALL_BASE + 150) +#define __NR_munlock (__NR_SYSCALL_BASE + 151) +#define __NR_mlockall (__NR_SYSCALL_BASE + 152) +#define __NR_munlockall (__NR_SYSCALL_BASE + 153) +#define __NR_sched_setparam (__NR_SYSCALL_BASE + 154) +#define __NR_sched_getparam (__NR_SYSCALL_BASE + 155) +#define __NR_sched_setscheduler (__NR_SYSCALL_BASE + 156) +#define __NR_sched_getscheduler (__NR_SYSCALL_BASE + 157) +#define __NR_sched_yield (__NR_SYSCALL_BASE + 158) +#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE + 159) +#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE + 160) +#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE + 161) +#define __NR_nanosleep (__NR_SYSCALL_BASE + 162) +#define __NR_mremap (__NR_SYSCALL_BASE + 163) +#define __NR_setresuid (__NR_SYSCALL_BASE + 164) +#define __NR_getresuid (__NR_SYSCALL_BASE + 165) +#define __NR_poll (__NR_SYSCALL_BASE + 168) +#define __NR_nfsservctl (__NR_SYSCALL_BASE + 169) +#define __NR_setresgid (__NR_SYSCALL_BASE + 170) +#define __NR_getresgid (__NR_SYSCALL_BASE + 171) +#define __NR_prctl (__NR_SYSCALL_BASE + 172) +#define __NR_rt_sigreturn (__NR_SYSCALL_BASE + 173) +#define __NR_rt_sigaction (__NR_SYSCALL_BASE + 174) +#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE + 175) +#define __NR_rt_sigpending (__NR_SYSCALL_BASE + 176) +#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE + 177) +#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE + 178) +#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE + 179) +#define __NR_pread64 (__NR_SYSCALL_BASE + 180) +#define __NR_pwrite64 (__NR_SYSCALL_BASE + 181) +#define __NR_chown (__NR_SYSCALL_BASE + 182) +#define __NR_getcwd (__NR_SYSCALL_BASE + 183) +#define __NR_capget (__NR_SYSCALL_BASE + 184) +#define __NR_capset (__NR_SYSCALL_BASE + 185) +#define __NR_sigaltstack (__NR_SYSCALL_BASE + 186) +#define __NR_sendfile (__NR_SYSCALL_BASE + 187) +#define __NR_vfork (__NR_SYSCALL_BASE + 190) +#define __NR_ugetrlimit (__NR_SYSCALL_BASE + 191) +#define __NR_mmap2 (__NR_SYSCALL_BASE + 192) +#define __NR_truncate64 (__NR_SYSCALL_BASE + 193) +#define __NR_ftruncate64 (__NR_SYSCALL_BASE + 194) +#define __NR_stat64 (__NR_SYSCALL_BASE + 195) +#define __NR_lstat64 (__NR_SYSCALL_BASE + 196) +#define __NR_fstat64 (__NR_SYSCALL_BASE + 197) +#define __NR_lchown32 (__NR_SYSCALL_BASE + 198) +#define __NR_getuid32 (__NR_SYSCALL_BASE + 199) +#define __NR_getgid32 (__NR_SYSCALL_BASE + 200) +#define __NR_geteuid32 (__NR_SYSCALL_BASE + 201) +#define __NR_getegid32 (__NR_SYSCALL_BASE + 202) +#define __NR_setreuid32 (__NR_SYSCALL_BASE + 203) +#define __NR_setregid32 (__NR_SYSCALL_BASE + 204) +#define __NR_getgroups32 (__NR_SYSCALL_BASE + 205) +#define __NR_setgroups32 (__NR_SYSCALL_BASE + 206) +#define __NR_fchown32 (__NR_SYSCALL_BASE + 207) +#define __NR_setresuid32 (__NR_SYSCALL_BASE + 208) +#define __NR_getresuid32 (__NR_SYSCALL_BASE + 209) +#define __NR_setresgid32 (__NR_SYSCALL_BASE + 210) +#define __NR_getresgid32 (__NR_SYSCALL_BASE + 211) +#define __NR_chown32 (__NR_SYSCALL_BASE + 212) +#define __NR_setuid32 (__NR_SYSCALL_BASE + 213) +#define __NR_setgid32 (__NR_SYSCALL_BASE + 214) +#define __NR_setfsuid32 (__NR_SYSCALL_BASE + 215) +#define __NR_setfsgid32 (__NR_SYSCALL_BASE + 216) +#define __NR_getdents64 (__NR_SYSCALL_BASE + 217) +#define __NR_pivot_root (__NR_SYSCALL_BASE + 218) +#define __NR_mincore (__NR_SYSCALL_BASE + 219) +#define __NR_madvise (__NR_SYSCALL_BASE + 220) +#define __NR_fcntl64 (__NR_SYSCALL_BASE + 221) +#define __NR_gettid (__NR_SYSCALL_BASE + 224) +#define __NR_readahead (__NR_SYSCALL_BASE + 225) +#define __NR_setxattr (__NR_SYSCALL_BASE + 226) +#define __NR_lsetxattr (__NR_SYSCALL_BASE + 227) +#define __NR_fsetxattr (__NR_SYSCALL_BASE + 228) +#define __NR_getxattr (__NR_SYSCALL_BASE + 229) +#define __NR_lgetxattr (__NR_SYSCALL_BASE + 230) +#define __NR_fgetxattr (__NR_SYSCALL_BASE + 231) +#define __NR_listxattr (__NR_SYSCALL_BASE + 232) +#define __NR_llistxattr (__NR_SYSCALL_BASE + 233) +#define __NR_flistxattr (__NR_SYSCALL_BASE + 234) +#define __NR_removexattr (__NR_SYSCALL_BASE + 235) +#define __NR_lremovexattr (__NR_SYSCALL_BASE + 236) +#define __NR_fremovexattr (__NR_SYSCALL_BASE + 237) +#define __NR_tkill (__NR_SYSCALL_BASE + 238) +#define __NR_sendfile64 (__NR_SYSCALL_BASE + 239) +#define __NR_futex (__NR_SYSCALL_BASE + 240) +#define __NR_sched_setaffinity (__NR_SYSCALL_BASE + 241) +#define __NR_sched_getaffinity (__NR_SYSCALL_BASE + 242) +#define __NR_io_setup (__NR_SYSCALL_BASE + 243) +#define __NR_io_destroy (__NR_SYSCALL_BASE + 244) +#define __NR_io_getevents (__NR_SYSCALL_BASE + 245) +#define __NR_io_submit (__NR_SYSCALL_BASE + 246) +#define __NR_io_cancel (__NR_SYSCALL_BASE + 247) +#define __NR_exit_group (__NR_SYSCALL_BASE + 248) +#define __NR_lookup_dcookie (__NR_SYSCALL_BASE + 249) +#define __NR_epoll_create (__NR_SYSCALL_BASE + 250) +#define __NR_epoll_ctl (__NR_SYSCALL_BASE + 251) +#define __NR_epoll_wait (__NR_SYSCALL_BASE + 252) +#define __NR_remap_file_pages (__NR_SYSCALL_BASE + 253) +#define __NR_set_tid_address (__NR_SYSCALL_BASE + 256) +#define __NR_timer_create (__NR_SYSCALL_BASE + 257) +#define __NR_timer_settime (__NR_SYSCALL_BASE + 258) +#define __NR_timer_gettime (__NR_SYSCALL_BASE + 259) +#define __NR_timer_getoverrun (__NR_SYSCALL_BASE + 260) +#define __NR_timer_delete (__NR_SYSCALL_BASE + 261) +#define __NR_clock_settime (__NR_SYSCALL_BASE + 262) +#define __NR_clock_gettime (__NR_SYSCALL_BASE + 263) +#define __NR_clock_getres (__NR_SYSCALL_BASE + 264) +#define __NR_clock_nanosleep (__NR_SYSCALL_BASE + 265) +#define __NR_statfs64 (__NR_SYSCALL_BASE + 266) +#define __NR_fstatfs64 (__NR_SYSCALL_BASE + 267) +#define __NR_tgkill (__NR_SYSCALL_BASE + 268) +#define __NR_utimes (__NR_SYSCALL_BASE + 269) +#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE + 270) +#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE + 271) +#define __NR_pciconfig_read (__NR_SYSCALL_BASE + 272) +#define __NR_pciconfig_write (__NR_SYSCALL_BASE + 273) +#define __NR_mq_open (__NR_SYSCALL_BASE + 274) +#define __NR_mq_unlink (__NR_SYSCALL_BASE + 275) +#define __NR_mq_timedsend (__NR_SYSCALL_BASE + 276) +#define __NR_mq_timedreceive (__NR_SYSCALL_BASE + 277) +#define __NR_mq_notify (__NR_SYSCALL_BASE + 278) +#define __NR_mq_getsetattr (__NR_SYSCALL_BASE + 279) +#define __NR_waitid (__NR_SYSCALL_BASE + 280) +#define __NR_socket (__NR_SYSCALL_BASE + 281) +#define __NR_bind (__NR_SYSCALL_BASE + 282) +#define __NR_connect (__NR_SYSCALL_BASE + 283) +#define __NR_listen (__NR_SYSCALL_BASE + 284) +#define __NR_accept (__NR_SYSCALL_BASE + 285) +#define __NR_getsockname (__NR_SYSCALL_BASE + 286) +#define __NR_getpeername (__NR_SYSCALL_BASE + 287) +#define __NR_socketpair (__NR_SYSCALL_BASE + 288) +#define __NR_send (__NR_SYSCALL_BASE + 289) +#define __NR_sendto (__NR_SYSCALL_BASE + 290) +#define __NR_recv (__NR_SYSCALL_BASE + 291) +#define __NR_recvfrom (__NR_SYSCALL_BASE + 292) +#define __NR_shutdown (__NR_SYSCALL_BASE + 293) +#define __NR_setsockopt (__NR_SYSCALL_BASE + 294) +#define __NR_getsockopt (__NR_SYSCALL_BASE + 295) +#define __NR_sendmsg (__NR_SYSCALL_BASE + 296) +#define __NR_recvmsg (__NR_SYSCALL_BASE + 297) +#define __NR_semop (__NR_SYSCALL_BASE + 298) +#define __NR_semget (__NR_SYSCALL_BASE + 299) +#define __NR_semctl (__NR_SYSCALL_BASE + 300) +#define __NR_msgsnd (__NR_SYSCALL_BASE + 301) +#define __NR_msgrcv (__NR_SYSCALL_BASE + 302) +#define __NR_msgget (__NR_SYSCALL_BASE + 303) +#define __NR_msgctl (__NR_SYSCALL_BASE + 304) +#define __NR_shmat (__NR_SYSCALL_BASE + 305) +#define __NR_shmdt (__NR_SYSCALL_BASE + 306) +#define __NR_shmget (__NR_SYSCALL_BASE + 307) +#define __NR_shmctl (__NR_SYSCALL_BASE + 308) +#define __NR_add_key (__NR_SYSCALL_BASE + 309) +#define __NR_request_key (__NR_SYSCALL_BASE + 310) +#define __NR_keyctl (__NR_SYSCALL_BASE + 311) +#define __NR_semtimedop (__NR_SYSCALL_BASE + 312) +#define __NR_vserver (__NR_SYSCALL_BASE + 313) +#define __NR_ioprio_set (__NR_SYSCALL_BASE + 314) +#define __NR_ioprio_get (__NR_SYSCALL_BASE + 315) +#define __NR_inotify_init (__NR_SYSCALL_BASE + 316) +#define __NR_inotify_add_watch (__NR_SYSCALL_BASE + 317) +#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE + 318) +#define __NR_mbind (__NR_SYSCALL_BASE + 319) +#define __NR_get_mempolicy (__NR_SYSCALL_BASE + 320) +#define __NR_set_mempolicy (__NR_SYSCALL_BASE + 321) +#define __NR_openat (__NR_SYSCALL_BASE + 322) +#define __NR_mkdirat (__NR_SYSCALL_BASE + 323) +#define __NR_mknodat (__NR_SYSCALL_BASE + 324) +#define __NR_fchownat (__NR_SYSCALL_BASE + 325) +#define __NR_futimesat (__NR_SYSCALL_BASE + 326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE + 327) +#define __NR_unlinkat (__NR_SYSCALL_BASE + 328) +#define __NR_renameat (__NR_SYSCALL_BASE + 329) +#define __NR_linkat (__NR_SYSCALL_BASE + 330) +#define __NR_symlinkat (__NR_SYSCALL_BASE + 331) +#define __NR_readlinkat (__NR_SYSCALL_BASE + 332) +#define __NR_fchmodat (__NR_SYSCALL_BASE + 333) +#define __NR_faccessat (__NR_SYSCALL_BASE + 334) +#define __NR_pselect6 (__NR_SYSCALL_BASE + 335) +#define __NR_ppoll (__NR_SYSCALL_BASE + 336) +#define __NR_unshare (__NR_SYSCALL_BASE + 337) +#define __NR_set_robust_list (__NR_SYSCALL_BASE + 338) +#define __NR_get_robust_list (__NR_SYSCALL_BASE + 339) +#define __NR_splice (__NR_SYSCALL_BASE + 340) +#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE + 341) +#define __NR_tee (__NR_SYSCALL_BASE + 342) +#define __NR_vmsplice (__NR_SYSCALL_BASE + 343) +#define __NR_move_pages (__NR_SYSCALL_BASE + 344) +#define __NR_getcpu (__NR_SYSCALL_BASE + 345) +#define __NR_epoll_pwait (__NR_SYSCALL_BASE + 346) +#define __NR_kexec_load (__NR_SYSCALL_BASE + 347) +#define __NR_utimensat (__NR_SYSCALL_BASE + 348) +#define __NR_signalfd (__NR_SYSCALL_BASE + 349) +#define __NR_timerfd_create (__NR_SYSCALL_BASE + 350) +#define __NR_eventfd (__NR_SYSCALL_BASE + 351) +#define __NR_fallocate (__NR_SYSCALL_BASE + 352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE + 353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE + 354) +#define __NR_signalfd4 (__NR_SYSCALL_BASE + 355) +#define __NR_eventfd2 (__NR_SYSCALL_BASE + 356) +#define __NR_epoll_create1 (__NR_SYSCALL_BASE + 357) +#define __NR_dup3 (__NR_SYSCALL_BASE + 358) +#define __NR_pipe2 (__NR_SYSCALL_BASE + 359) +#define __NR_inotify_init1 (__NR_SYSCALL_BASE + 360) +#define __NR_preadv (__NR_SYSCALL_BASE + 361) +#define __NR_pwritev (__NR_SYSCALL_BASE + 362) +#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE + 363) +#define __NR_perf_event_open (__NR_SYSCALL_BASE + 364) +#define __NR_recvmmsg (__NR_SYSCALL_BASE + 365) +#define __NR_accept4 (__NR_SYSCALL_BASE + 366) +#define __NR_fanotify_init (__NR_SYSCALL_BASE + 367) +#define __NR_fanotify_mark (__NR_SYSCALL_BASE + 368) +#define __NR_prlimit64 (__NR_SYSCALL_BASE + 369) +#define __NR_name_to_handle_at (__NR_SYSCALL_BASE + 370) +#define __NR_open_by_handle_at (__NR_SYSCALL_BASE + 371) +#define __NR_clock_adjtime (__NR_SYSCALL_BASE + 372) +#define __NR_syncfs (__NR_SYSCALL_BASE + 373) +#define __NR_sendmmsg (__NR_SYSCALL_BASE + 374) +#define __NR_setns (__NR_SYSCALL_BASE + 375) +#define __NR_process_vm_readv (__NR_SYSCALL_BASE + 376) +#define __NR_process_vm_writev (__NR_SYSCALL_BASE + 377) +#define __NR_kcmp (__NR_SYSCALL_BASE + 378) +#define __NR_finit_module (__NR_SYSCALL_BASE + 379) +#define __NR_sched_setattr (__NR_SYSCALL_BASE + 380) +#define __NR_sched_getattr (__NR_SYSCALL_BASE + 381) +#define __NR_renameat2 (__NR_SYSCALL_BASE + 382) +#define __NR_seccomp (__NR_SYSCALL_BASE + 383) +#define __NR_getrandom (__NR_SYSCALL_BASE + 384) +#define __NR_memfd_create (__NR_SYSCALL_BASE + 385) +#define __NR_bpf (__NR_SYSCALL_BASE + 386) +#define __NR_execveat (__NR_SYSCALL_BASE + 387) +#define __NR_userfaultfd (__NR_SYSCALL_BASE + 388) +#define __NR_membarrier (__NR_SYSCALL_BASE + 389) +#define __NR_mlock2 (__NR_SYSCALL_BASE + 390) +#define __NR_copy_file_range (__NR_SYSCALL_BASE + 391) +#define __NR_preadv2 (__NR_SYSCALL_BASE + 392) +#define __NR_pwritev2 (__NR_SYSCALL_BASE + 393) +#define __NR_pkey_mprotect (__NR_SYSCALL_BASE + 394) +#define __NR_pkey_alloc (__NR_SYSCALL_BASE + 395) +#define __NR_pkey_free (__NR_SYSCALL_BASE + 396) + +#endif /* _ASM_ARM_UNISTD_COMMON_H */ diff --git a/linux-headers/asm-arm/unistd-eabi.h b/linux-headers/asm-arm/unistd-eabi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-eabi.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_EABI_H +#define _ASM_ARM_UNISTD_EABI_H 1 + + +#endif /* _ASM_ARM_UNISTD_EABI_H */ diff --git a/linux-headers/asm-arm/unistd-oabi.h b/linux-headers/asm-arm/unistd-oabi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-oabi.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_OABI_H +#define _ASM_ARM_UNISTD_OABI_H 1 + +#define __NR_time (__NR_SYSCALL_BASE + 13) +#define __NR_umount (__NR_SYSCALL_BASE + 22) +#define __NR_stime (__NR_SYSCALL_BASE + 25) +#define __NR_alarm (__NR_SYSCALL_BASE + 27) +#define __NR_utime (__NR_SYSCALL_BASE + 30) +#define __NR_getrlimit (__NR_SYSCALL_BASE + 76) +#define __NR_select (__NR_SYSCALL_BASE + 82) +#define __NR_readdir (__NR_SYSCALL_BASE + 89) +#define __NR_mmap (__NR_SYSCALL_BASE + 90) +#define __NR_socketcall (__NR_SYSCALL_BASE + 102) +#define __NR_syscall (__NR_SYSCALL_BASE + 113) +#define __NR_ipc (__NR_SYSCALL_BASE + 117) + +#endif /* _ASM_ARM_UNISTD_OABI_H */ diff --git a/linux-headers/asm-arm/unistd.h b/linux-headers/asm-arm/unistd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm/unistd.h +++ b/linux-headers/asm-arm/unistd.h @@ -XXX,XX +XXX,XX @@ #if defined(__thumb__) || defined(__ARM_EABI__) #define __NR_SYSCALL_BASE 0 +#include <asm/unistd-eabi.h> #else #define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE +#include <asm/unistd-oabi.h> #endif -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) -#define __NR_exit (__NR_SYSCALL_BASE+ 1) -#define __NR_fork (__NR_SYSCALL_BASE+ 2) -#define __NR_read (__NR_SYSCALL_BASE+ 3) -#define __NR_write (__NR_SYSCALL_BASE+ 4) -#define __NR_open (__NR_SYSCALL_BASE+ 5) -#define __NR_close (__NR_SYSCALL_BASE+ 6) - /* 7 was sys_waitpid */ -#define __NR_creat (__NR_SYSCALL_BASE+ 8) -#define __NR_link (__NR_SYSCALL_BASE+ 9) -#define __NR_unlink (__NR_SYSCALL_BASE+ 10) -#define __NR_execve (__NR_SYSCALL_BASE+ 11) -#define __NR_chdir (__NR_SYSCALL_BASE+ 12) -#define __NR_time (__NR_SYSCALL_BASE+ 13) -#define __NR_mknod (__NR_SYSCALL_BASE+ 14) -#define __NR_chmod (__NR_SYSCALL_BASE+ 15) -#define __NR_lchown (__NR_SYSCALL_BASE+ 16) - /* 17 was sys_break */ - /* 18 was sys_stat */ -#define __NR_lseek (__NR_SYSCALL_BASE+ 19) -#define __NR_getpid (__NR_SYSCALL_BASE+ 20) -#define __NR_mount (__NR_SYSCALL_BASE+ 21) -#define __NR_umount (__NR_SYSCALL_BASE+ 22) -#define __NR_setuid (__NR_SYSCALL_BASE+ 23) -#define __NR_getuid (__NR_SYSCALL_BASE+ 24) -#define __NR_stime (__NR_SYSCALL_BASE+ 25) -#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) -#define __NR_alarm (__NR_SYSCALL_BASE+ 27) - /* 28 was sys_fstat */ -#define __NR_pause (__NR_SYSCALL_BASE+ 29) -#define __NR_utime (__NR_SYSCALL_BASE+ 30) - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access (__NR_SYSCALL_BASE+ 33) -#define __NR_nice (__NR_SYSCALL_BASE+ 34) - /* 35 was sys_ftime */ -#define __NR_sync (__NR_SYSCALL_BASE+ 36) -#define __NR_kill (__NR_SYSCALL_BASE+ 37) -#define __NR_rename (__NR_SYSCALL_BASE+ 38) -#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) -#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) -#define __NR_dup (__NR_SYSCALL_BASE+ 41) -#define __NR_pipe (__NR_SYSCALL_BASE+ 42) -#define __NR_times (__NR_SYSCALL_BASE+ 43) - /* 44 was sys_prof */ -#define __NR_brk (__NR_SYSCALL_BASE+ 45) -#define __NR_setgid (__NR_SYSCALL_BASE+ 46) -#define __NR_getgid (__NR_SYSCALL_BASE+ 47) - /* 48 was sys_signal */ -#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) -#define __NR_getegid (__NR_SYSCALL_BASE+ 50) -#define __NR_acct (__NR_SYSCALL_BASE+ 51) -#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) - /* 53 was sys_lock */ -#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) -#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) - /* 56 was sys_mpx */ -#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask (__NR_SYSCALL_BASE+ 60) -#define __NR_chroot (__NR_SYSCALL_BASE+ 61) -#define __NR_ustat (__NR_SYSCALL_BASE+ 62) -#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) -#define __NR_getppid (__NR_SYSCALL_BASE+ 64) -#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) -#define __NR_setsid (__NR_SYSCALL_BASE+ 66) -#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) - /* 68 was sys_sgetmask */ - /* 69 was sys_ssetmask */ -#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) -#define __NR_setregid (__NR_SYSCALL_BASE+ 71) -#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) -#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) -#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) -#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) -#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ -#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) -#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) -#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) -#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) -#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) -#define __NR_select (__NR_SYSCALL_BASE+ 82) -#define __NR_symlink (__NR_SYSCALL_BASE+ 83) - /* 84 was sys_lstat */ -#define __NR_readlink (__NR_SYSCALL_BASE+ 85) -#define __NR_uselib (__NR_SYSCALL_BASE+ 86) -#define __NR_swapon (__NR_SYSCALL_BASE+ 87) -#define __NR_reboot (__NR_SYSCALL_BASE+ 88) -#define __NR_readdir (__NR_SYSCALL_BASE+ 89) -#define __NR_mmap (__NR_SYSCALL_BASE+ 90) -#define __NR_munmap (__NR_SYSCALL_BASE+ 91) -#define __NR_truncate (__NR_SYSCALL_BASE+ 92) -#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) -#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) -#define __NR_fchown (__NR_SYSCALL_BASE+ 95) -#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) -#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) - /* 98 was sys_profil */ -#define __NR_statfs (__NR_SYSCALL_BASE+ 99) -#define __NR_fstatfs (__NR_SYSCALL_BASE+100) - /* 101 was sys_ioperm */ -#define __NR_socketcall (__NR_SYSCALL_BASE+102) -#define __NR_syslog (__NR_SYSCALL_BASE+103) -#define __NR_setitimer (__NR_SYSCALL_BASE+104) -#define __NR_getitimer (__NR_SYSCALL_BASE+105) -#define __NR_stat (__NR_SYSCALL_BASE+106) -#define __NR_lstat (__NR_SYSCALL_BASE+107) -#define __NR_fstat (__NR_SYSCALL_BASE+108) - /* 109 was sys_uname */ - /* 110 was sys_iopl */ -#define __NR_vhangup (__NR_SYSCALL_BASE+111) - /* 112 was sys_idle */ -#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ -#define __NR_wait4 (__NR_SYSCALL_BASE+114) -#define __NR_swapoff (__NR_SYSCALL_BASE+115) -#define __NR_sysinfo (__NR_SYSCALL_BASE+116) -#define __NR_ipc (__NR_SYSCALL_BASE+117) -#define __NR_fsync (__NR_SYSCALL_BASE+118) -#define __NR_sigreturn (__NR_SYSCALL_BASE+119) -#define __NR_clone (__NR_SYSCALL_BASE+120) -#define __NR_setdomainname (__NR_SYSCALL_BASE+121) -#define __NR_uname (__NR_SYSCALL_BASE+122) - /* 123 was sys_modify_ldt */ -#define __NR_adjtimex (__NR_SYSCALL_BASE+124) -#define __NR_mprotect (__NR_SYSCALL_BASE+125) -#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) - /* 127 was sys_create_module */ -#define __NR_init_module (__NR_SYSCALL_BASE+128) -#define __NR_delete_module (__NR_SYSCALL_BASE+129) - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl (__NR_SYSCALL_BASE+131) -#define __NR_getpgid (__NR_SYSCALL_BASE+132) -#define __NR_fchdir (__NR_SYSCALL_BASE+133) -#define __NR_bdflush (__NR_SYSCALL_BASE+134) -#define __NR_sysfs (__NR_SYSCALL_BASE+135) -#define __NR_personality (__NR_SYSCALL_BASE+136) - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid (__NR_SYSCALL_BASE+138) -#define __NR_setfsgid (__NR_SYSCALL_BASE+139) -#define __NR__llseek (__NR_SYSCALL_BASE+140) -#define __NR_getdents (__NR_SYSCALL_BASE+141) -#define __NR__newselect (__NR_SYSCALL_BASE+142) -#define __NR_flock (__NR_SYSCALL_BASE+143) -#define __NR_msync (__NR_SYSCALL_BASE+144) -#define __NR_readv (__NR_SYSCALL_BASE+145) -#define __NR_writev (__NR_SYSCALL_BASE+146) -#define __NR_getsid (__NR_SYSCALL_BASE+147) -#define __NR_fdatasync (__NR_SYSCALL_BASE+148) -#define __NR__sysctl (__NR_SYSCALL_BASE+149) -#define __NR_mlock (__NR_SYSCALL_BASE+150) -#define __NR_munlock (__NR_SYSCALL_BASE+151) -#define __NR_mlockall (__NR_SYSCALL_BASE+152) -#define __NR_munlockall (__NR_SYSCALL_BASE+153) -#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) -#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) -#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) -#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) -#define __NR_sched_yield (__NR_SYSCALL_BASE+158) -#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) -#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) -#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) -#define __NR_nanosleep (__NR_SYSCALL_BASE+162) -#define __NR_mremap (__NR_SYSCALL_BASE+163) -#define __NR_setresuid (__NR_SYSCALL_BASE+164) -#define __NR_getresuid (__NR_SYSCALL_BASE+165) - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll (__NR_SYSCALL_BASE+168) -#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) -#define __NR_setresgid (__NR_SYSCALL_BASE+170) -#define __NR_getresgid (__NR_SYSCALL_BASE+171) -#define __NR_prctl (__NR_SYSCALL_BASE+172) -#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) -#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) -#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) -#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) -#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) -#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) -#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) -#define __NR_pread64 (__NR_SYSCALL_BASE+180) -#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) -#define __NR_chown (__NR_SYSCALL_BASE+182) -#define __NR_getcwd (__NR_SYSCALL_BASE+183) -#define __NR_capget (__NR_SYSCALL_BASE+184) -#define __NR_capset (__NR_SYSCALL_BASE+185) -#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) -#define __NR_sendfile (__NR_SYSCALL_BASE+187) - /* 188 reserved */ - /* 189 reserved */ -#define __NR_vfork (__NR_SYSCALL_BASE+190) -#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ -#define __NR_mmap2 (__NR_SYSCALL_BASE+192) -#define __NR_truncate64 (__NR_SYSCALL_BASE+193) -#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) -#define __NR_stat64 (__NR_SYSCALL_BASE+195) -#define __NR_lstat64 (__NR_SYSCALL_BASE+196) -#define __NR_fstat64 (__NR_SYSCALL_BASE+197) -#define __NR_lchown32 (__NR_SYSCALL_BASE+198) -#define __NR_getuid32 (__NR_SYSCALL_BASE+199) -#define __NR_getgid32 (__NR_SYSCALL_BASE+200) -#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) -#define __NR_getegid32 (__NR_SYSCALL_BASE+202) -#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) -#define __NR_setregid32 (__NR_SYSCALL_BASE+204) -#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) -#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) -#define __NR_fchown32 (__NR_SYSCALL_BASE+207) -#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) -#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) -#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) -#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) -#define __NR_chown32 (__NR_SYSCALL_BASE+212) -#define __NR_setuid32 (__NR_SYSCALL_BASE+213) -#define __NR_setgid32 (__NR_SYSCALL_BASE+214) -#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) -#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) -#define __NR_getdents64 (__NR_SYSCALL_BASE+217) -#define __NR_pivot_root (__NR_SYSCALL_BASE+218) -#define __NR_mincore (__NR_SYSCALL_BASE+219) -#define __NR_madvise (__NR_SYSCALL_BASE+220) -#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) - /* 222 for tux */ - /* 223 is unused */ -#define __NR_gettid (__NR_SYSCALL_BASE+224) -#define __NR_readahead (__NR_SYSCALL_BASE+225) -#define __NR_setxattr (__NR_SYSCALL_BASE+226) -#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) -#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) -#define __NR_getxattr (__NR_SYSCALL_BASE+229) -#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) -#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) -#define __NR_listxattr (__NR_SYSCALL_BASE+232) -#define __NR_llistxattr (__NR_SYSCALL_BASE+233) -#define __NR_flistxattr (__NR_SYSCALL_BASE+234) -#define __NR_removexattr (__NR_SYSCALL_BASE+235) -#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) -#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) -#define __NR_tkill (__NR_SYSCALL_BASE+238) -#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) -#define __NR_futex (__NR_SYSCALL_BASE+240) -#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) -#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) -#define __NR_io_setup (__NR_SYSCALL_BASE+243) -#define __NR_io_destroy (__NR_SYSCALL_BASE+244) -#define __NR_io_getevents (__NR_SYSCALL_BASE+245) -#define __NR_io_submit (__NR_SYSCALL_BASE+246) -#define __NR_io_cancel (__NR_SYSCALL_BASE+247) -#define __NR_exit_group (__NR_SYSCALL_BASE+248) -#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) -#define __NR_epoll_create (__NR_SYSCALL_BASE+250) -#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) -#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) -#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) - /* 254 for set_thread_area */ - /* 255 for get_thread_area */ -#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) -#define __NR_timer_create (__NR_SYSCALL_BASE+257) -#define __NR_timer_settime (__NR_SYSCALL_BASE+258) -#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) -#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) -#define __NR_timer_delete (__NR_SYSCALL_BASE+261) -#define __NR_clock_settime (__NR_SYSCALL_BASE+262) -#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) -#define __NR_clock_getres (__NR_SYSCALL_BASE+264) -#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) -#define __NR_statfs64 (__NR_SYSCALL_BASE+266) -#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) -#define __NR_tgkill (__NR_SYSCALL_BASE+268) -#define __NR_utimes (__NR_SYSCALL_BASE+269) -#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) -#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) -#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) -#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) -#define __NR_mq_open (__NR_SYSCALL_BASE+274) -#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) -#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) -#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) -#define __NR_mq_notify (__NR_SYSCALL_BASE+278) -#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) -#define __NR_waitid (__NR_SYSCALL_BASE+280) -#define __NR_socket (__NR_SYSCALL_BASE+281) -#define __NR_bind (__NR_SYSCALL_BASE+282) -#define __NR_connect (__NR_SYSCALL_BASE+283) -#define __NR_listen (__NR_SYSCALL_BASE+284) -#define __NR_accept (__NR_SYSCALL_BASE+285) -#define __NR_getsockname (__NR_SYSCALL_BASE+286) -#define __NR_getpeername (__NR_SYSCALL_BASE+287) -#define __NR_socketpair (__NR_SYSCALL_BASE+288) -#define __NR_send (__NR_SYSCALL_BASE+289) -#define __NR_sendto (__NR_SYSCALL_BASE+290) -#define __NR_recv (__NR_SYSCALL_BASE+291) -#define __NR_recvfrom (__NR_SYSCALL_BASE+292) -#define __NR_shutdown (__NR_SYSCALL_BASE+293) -#define __NR_setsockopt (__NR_SYSCALL_BASE+294) -#define __NR_getsockopt (__NR_SYSCALL_BASE+295) -#define __NR_sendmsg (__NR_SYSCALL_BASE+296) -#define __NR_recvmsg (__NR_SYSCALL_BASE+297) -#define __NR_semop (__NR_SYSCALL_BASE+298) -#define __NR_semget (__NR_SYSCALL_BASE+299) -#define __NR_semctl (__NR_SYSCALL_BASE+300) -#define __NR_msgsnd (__NR_SYSCALL_BASE+301) -#define __NR_msgrcv (__NR_SYSCALL_BASE+302) -#define __NR_msgget (__NR_SYSCALL_BASE+303) -#define __NR_msgctl (__NR_SYSCALL_BASE+304) -#define __NR_shmat (__NR_SYSCALL_BASE+305) -#define __NR_shmdt (__NR_SYSCALL_BASE+306) -#define __NR_shmget (__NR_SYSCALL_BASE+307) -#define __NR_shmctl (__NR_SYSCALL_BASE+308) -#define __NR_add_key (__NR_SYSCALL_BASE+309) -#define __NR_request_key (__NR_SYSCALL_BASE+310) -#define __NR_keyctl (__NR_SYSCALL_BASE+311) -#define __NR_semtimedop (__NR_SYSCALL_BASE+312) -#define __NR_vserver (__NR_SYSCALL_BASE+313) -#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) -#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) -#define __NR_inotify_init (__NR_SYSCALL_BASE+316) -#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) -#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) -#define __NR_mbind (__NR_SYSCALL_BASE+319) -#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) -#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) -#define __NR_openat (__NR_SYSCALL_BASE+322) -#define __NR_mkdirat (__NR_SYSCALL_BASE+323) -#define __NR_mknodat (__NR_SYSCALL_BASE+324) -#define __NR_fchownat (__NR_SYSCALL_BASE+325) -#define __NR_futimesat (__NR_SYSCALL_BASE+326) -#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) -#define __NR_unlinkat (__NR_SYSCALL_BASE+328) -#define __NR_renameat (__NR_SYSCALL_BASE+329) -#define __NR_linkat (__NR_SYSCALL_BASE+330) -#define __NR_symlinkat (__NR_SYSCALL_BASE+331) -#define __NR_readlinkat (__NR_SYSCALL_BASE+332) -#define __NR_fchmodat (__NR_SYSCALL_BASE+333) -#define __NR_faccessat (__NR_SYSCALL_BASE+334) -#define __NR_pselect6 (__NR_SYSCALL_BASE+335) -#define __NR_ppoll (__NR_SYSCALL_BASE+336) -#define __NR_unshare (__NR_SYSCALL_BASE+337) -#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) -#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) -#define __NR_splice (__NR_SYSCALL_BASE+340) -#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) +#include <asm/unistd-common.h> #define __NR_sync_file_range2 __NR_arm_sync_file_range -#define __NR_tee (__NR_SYSCALL_BASE+342) -#define __NR_vmsplice (__NR_SYSCALL_BASE+343) -#define __NR_move_pages (__NR_SYSCALL_BASE+344) -#define __NR_getcpu (__NR_SYSCALL_BASE+345) -#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346) -#define __NR_kexec_load (__NR_SYSCALL_BASE+347) -#define __NR_utimensat (__NR_SYSCALL_BASE+348) -#define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) -#define __NR_eventfd (__NR_SYSCALL_BASE+351) -#define __NR_fallocate (__NR_SYSCALL_BASE+352) -#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) -#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) -#define __NR_signalfd4 (__NR_SYSCALL_BASE+355) -#define __NR_eventfd2 (__NR_SYSCALL_BASE+356) -#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357) -#define __NR_dup3 (__NR_SYSCALL_BASE+358) -#define __NR_pipe2 (__NR_SYSCALL_BASE+359) -#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) -#define __NR_preadv (__NR_SYSCALL_BASE+361) -#define __NR_pwritev (__NR_SYSCALL_BASE+362) -#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363) -#define __NR_perf_event_open (__NR_SYSCALL_BASE+364) -#define __NR_recvmmsg (__NR_SYSCALL_BASE+365) -#define __NR_accept4 (__NR_SYSCALL_BASE+366) -#define __NR_fanotify_init (__NR_SYSCALL_BASE+367) -#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) -#define __NR_prlimit64 (__NR_SYSCALL_BASE+369) -#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) -#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) -#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) -#define __NR_syncfs (__NR_SYSCALL_BASE+373) -#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) -#define __NR_setns (__NR_SYSCALL_BASE+375) -#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) -#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) -#define __NR_kcmp (__NR_SYSCALL_BASE+378) -#define __NR_finit_module (__NR_SYSCALL_BASE+379) -#define __NR_sched_setattr (__NR_SYSCALL_BASE+380) -#define __NR_sched_getattr (__NR_SYSCALL_BASE+381) -#define __NR_renameat2 (__NR_SYSCALL_BASE+382) -#define __NR_seccomp (__NR_SYSCALL_BASE+383) -#define __NR_getrandom (__NR_SYSCALL_BASE+384) -#define __NR_memfd_create (__NR_SYSCALL_BASE+385) -#define __NR_bpf (__NR_SYSCALL_BASE+386) -#define __NR_execveat (__NR_SYSCALL_BASE+387) -#define __NR_userfaultfd (__NR_SYSCALL_BASE+388) -#define __NR_membarrier (__NR_SYSCALL_BASE+389) -#define __NR_mlock2 (__NR_SYSCALL_BASE+390) -#define __NR_copy_file_range (__NR_SYSCALL_BASE+391) -#define __NR_preadv2 (__NR_SYSCALL_BASE+392) -#define __NR_pwritev2 (__NR_SYSCALL_BASE+393) /* * The following SWIs are ARM private. @@ -XXX,XX +XXX,XX @@ #define __ARM_NR_usr32 (__ARM_NR_BASE+4) #define __ARM_NR_set_tls (__ARM_NR_BASE+5) -/* - * The following syscalls are obsolete and no longer available for EABI. - */ -#if defined(__ARM_EABI__) -#undef __NR_time -#undef __NR_umount -#undef __NR_stime -#undef __NR_alarm -#undef __NR_utime -#undef __NR_getrlimit -#undef __NR_select -#undef __NR_readdir -#undef __NR_mmap -#undef __NR_socketcall -#undef __NR_syscall -#undef __NR_ipc -#endif - #endif /* __ASM_ARM_UNISTD_H */ diff --git a/linux-headers/asm-arm64/kvm.h b/linux-headers/asm-arm64/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm64/kvm.h +++ b/linux-headers/asm-arm64/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 #define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 +#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ + (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) #define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 #define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 +#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 +#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ + (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff +#define VGIC_LEVEL_INFO_LINE_LEVEL 0 + #define KVM_DEV_ARM_VGIC_CTRL_INIT 0 /* Device Control API on vcpu fd */ diff --git a/linux-headers/asm-powerpc/kvm.h b/linux-headers/asm-powerpc/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/kvm.h +++ b/linux-headers/asm-powerpc/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { __u16 n_invalid; }; +/* For KVM_PPC_CONFIGURE_V3_MMU */ +struct kvm_ppc_mmuv3_cfg { + __u64 flags; + __u64 process_table; /* second doubleword of partition table entry */ +}; + +/* Flag values for KVM_PPC_CONFIGURE_V3_MMU */ +#define KVM_PPC_MMUV3_RADIX 1 /* 1 = radix mode, 0 = HPT */ +#define KVM_PPC_MMUV3_GTSE 2 /* global translation shootdown enb. */ + +/* For KVM_PPC_GET_RMMU_INFO */ +struct kvm_ppc_rmmu_info { + struct kvm_ppc_radix_geom { + __u8 page_shift; + __u8 level_bits[4]; + __u8 pad[3]; + } geometries[8]; + __u32 ap_encodings[8]; +}; + /* Per-vcpu XICS interrupt controller state */ #define KVM_REG_PPC_ICP_STATE (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8c) @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_REG_PPC_SPRG9 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xba) #define KVM_REG_PPC_DBSR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbb) +/* POWER9 registers */ +#define KVM_REG_PPC_TIDR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbc) +#define KVM_REG_PPC_PSSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd) + /* Transactional Memory checkpointed state: * This is all GPRs, all VSX regs and a subset of SPRs */ @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_REG_PPC_TM_VSCR (KVM_REG_PPC_TM | KVM_REG_SIZE_U32 | 0x67) #define KVM_REG_PPC_TM_DSCR (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x68) #define KVM_REG_PPC_TM_TAR (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x69) +#define KVM_REG_PPC_TM_XER (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x6a) /* PPC64 eXternal Interrupt Controller Specification */ #define KVM_DEV_XICS_GRP_SOURCES 1 /* 64-bit source attributes */ @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_XICS_LEVEL_SENSITIVE (1ULL << 40) #define KVM_XICS_MASKED (1ULL << 41) #define KVM_XICS_PENDING (1ULL << 42) +#define KVM_XICS_PRESENTED (1ULL << 43) +#define KVM_XICS_QUEUED (1ULL << 44) #endif /* __LINUX_KVM_POWERPC_H */ diff --git a/linux-headers/asm-powerpc/unistd.h b/linux-headers/asm-powerpc/unistd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/unistd.h +++ b/linux-headers/asm-powerpc/unistd.h @@ -XXX,XX +XXX,XX @@ #define __NR_copy_file_range 379 #define __NR_preadv2 380 #define __NR_pwritev2 381 +#define __NR_kexec_file_load 382 #endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/linux-headers/asm-x86/kvm_para.h b/linux-headers/asm-x86/kvm_para.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-x86/kvm_para.h +++ b/linux-headers/asm-x86/kvm_para.h @@ -XXX,XX +XXX,XX @@ struct kvm_steal_time { __u64 steal; __u32 version; __u32 flags; - __u32 pad[12]; + __u8 preempted; + __u8 u8_pad[3]; + __u32 pad[11]; +}; + +#define KVM_CLOCK_PAIRING_WALLCLOCK 0 +struct kvm_clock_pairing { + __s64 sec; + __s64 nsec; + __u64 tsc; + __u32 flags; + __u32 pad[9]; }; #define KVM_STEAL_ALIGNMENT_BITS 5 diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/kvm.h +++ b/linux-headers/linux/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_hyperv_exit { struct kvm_run { /* in */ __u8 request_interrupt_window; - __u8 padding1[7]; + __u8 immediate_exit; + __u8 padding1[6]; /* out */ __u32 exit_reason; @@ -XXX,XX +XXX,XX @@ struct kvm_enable_cap { }; /* for KVM_PPC_GET_PVINFO */ + +#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) + struct kvm_ppc_pvinfo { /* out */ __u32 flags; @@ -XXX,XX +XXX,XX @@ struct kvm_ppc_smmu_info { struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; }; -#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) +/* for KVM_PPC_RESIZE_HPT_{PREPARE,COMMIT} */ +struct kvm_ppc_resize_hpt { + __u64 flags; + __u32 shift; + __u32 pad; +}; #define KVMIO 0xAE @@ -XXX,XX +XXX,XX @@ struct kvm_ppc_smmu_info { #define KVM_CAP_S390_USER_INSTR0 130 #define KVM_CAP_MSI_DEVID 131 #define KVM_CAP_PPC_HTM 132 +#define KVM_CAP_SPAPR_RESIZE_HPT 133 +#define KVM_CAP_PPC_MMU_RADIX 134 +#define KVM_CAP_PPC_MMU_HASH_V3 135 +#define KVM_CAP_IMMEDIATE_EXIT 136 #ifdef KVM_CAP_IRQ_ROUTING @@ -XXX,XX +XXX,XX @@ struct kvm_s390_ucas_mapping { #define KVM_ARM_SET_DEVICE_ADDR _IOW(KVMIO, 0xab, struct kvm_arm_device_addr) /* Available with KVM_CAP_PPC_RTAS */ #define KVM_PPC_RTAS_DEFINE_TOKEN _IOW(KVMIO, 0xac, struct kvm_rtas_token_args) +/* Available with KVM_CAP_SPAPR_RESIZE_HPT */ +#define KVM_PPC_RESIZE_HPT_PREPARE _IOR(KVMIO, 0xad, struct kvm_ppc_resize_hpt) +#define KVM_PPC_RESIZE_HPT_COMMIT _IOR(KVMIO, 0xae, struct kvm_ppc_resize_hpt) +/* Available with KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 */ +#define KVM_PPC_CONFIGURE_V3_MMU _IOW(KVMIO, 0xaf, struct kvm_ppc_mmuv3_cfg) +/* Available with KVM_CAP_PPC_RADIX_MMU */ +#define KVM_PPC_GET_RMMU_INFO _IOW(KVMIO, 0xb0, struct kvm_ppc_rmmu_info) /* ioctl for vm fd */ #define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) diff --git a/linux-headers/linux/kvm_para.h b/linux-headers/linux/kvm_para.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/kvm_para.h +++ b/linux-headers/linux/kvm_para.h @@ -XXX,XX +XXX,XX @@ #define KVM_EFAULT EFAULT #define KVM_E2BIG E2BIG #define KVM_EPERM EPERM +#define KVM_EOPNOTSUPP 95 #define KVM_HC_VAPIC_POLL_IRQ 1 #define KVM_HC_MMU_OP 2 @@ -XXX,XX +XXX,XX @@ #define KVM_HC_MIPS_GET_CLOCK_FREQ 6 #define KVM_HC_MIPS_EXIT_VM 7 #define KVM_HC_MIPS_CONSOLE_OUTPUT 8 +#define KVM_HC_CLOCK_PAIRING 9 /* * hypercalls use architecture specific diff --git a/linux-headers/linux/userfaultfd.h b/linux-headers/linux/userfaultfd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/userfaultfd.h +++ b/linux-headers/linux/userfaultfd.h @@ -XXX,XX +XXX,XX @@ #include <linux/types.h> -#define UFFD_API ((__u64)0xAA) /* - * After implementing the respective features it will become: - * #define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | \ - * UFFD_FEATURE_EVENT_FORK) + * If the UFFDIO_API is upgraded someday, the UFFDIO_UNREGISTER and + * UFFDIO_WAKE ioctls should be defined as _IOW and not as _IOR. In + * userfaultfd.h we assumed the kernel was reading (instead _IOC_READ + * means the userland is reading). */ -#define UFFD_API_FEATURES (0) +#define UFFD_API ((__u64)0xAA) +#define UFFD_API_FEATURES (UFFD_FEATURE_EVENT_FORK | \ + UFFD_FEATURE_EVENT_REMAP | \ + UFFD_FEATURE_EVENT_MADVDONTNEED | \ + UFFD_FEATURE_MISSING_HUGETLBFS | \ + UFFD_FEATURE_MISSING_SHMEM) #define UFFD_API_IOCTLS \ ((__u64)1 << _UFFDIO_REGISTER | \ (__u64)1 << _UFFDIO_UNREGISTER | \ @@ -XXX,XX +XXX,XX @@ ((__u64)1 << _UFFDIO_WAKE | \ (__u64)1 << _UFFDIO_COPY | \ (__u64)1 << _UFFDIO_ZEROPAGE) +#define UFFD_API_RANGE_IOCTLS_BASIC \ + ((__u64)1 << _UFFDIO_WAKE | \ + (__u64)1 << _UFFDIO_COPY) /* * Valid ioctl command number range with this API is from 0x00 to @@ -XXX,XX +XXX,XX @@ struct uffd_msg { } pagefault; struct { + __u32 ufd; + } fork; + + struct { + __u64 from; + __u64 to; + __u64 len; + } remap; + + struct { + __u64 start; + __u64 end; + } madv_dn; + + struct { /* unused reserved fields */ __u64 reserved1; __u64 reserved2; @@ -XXX,XX +XXX,XX @@ struct uffd_msg { * Start at 0x12 and not at 0 to be more strict against bugs. */ #define UFFD_EVENT_PAGEFAULT 0x12 -#if 0 /* not available yet */ #define UFFD_EVENT_FORK 0x13 -#endif +#define UFFD_EVENT_REMAP 0x14 +#define UFFD_EVENT_MADVDONTNEED 0x15 /* flags for UFFD_EVENT_PAGEFAULT */ #define UFFD_PAGEFAULT_FLAG_WRITE (1<<0) /* If this was a write fault */ @@ -XXX,XX +XXX,XX @@ struct uffdio_api { * Note: UFFD_EVENT_PAGEFAULT and UFFD_PAGEFAULT_FLAG_WRITE * are to be considered implicitly always enabled in all kernels as * long as the uffdio_api.api requested matches UFFD_API. + * + * UFFD_FEATURE_MISSING_HUGETLBFS means an UFFDIO_REGISTER + * with UFFDIO_REGISTER_MODE_MISSING mode will succeed on + * hugetlbfs virtual memory ranges. Adding or not adding + * UFFD_FEATURE_MISSING_HUGETLBFS to uffdio_api.features has + * no real functional effect after UFFDIO_API returns, but + * it's only useful for an initial feature set probe at + * UFFDIO_API time. There are two ways to use it: + * + * 1) by adding UFFD_FEATURE_MISSING_HUGETLBFS to the + * uffdio_api.features before calling UFFDIO_API, an error + * will be returned by UFFDIO_API on a kernel without + * hugetlbfs missing support + * + * 2) the UFFD_FEATURE_MISSING_HUGETLBFS can not be added in + * uffdio_api.features and instead it will be set by the + * kernel in the uffdio_api.features if the kernel supports + * it, so userland can later check if the feature flag is + * present in uffdio_api.features after UFFDIO_API + * succeeded. + * + * UFFD_FEATURE_MISSING_SHMEM works the same as + * UFFD_FEATURE_MISSING_HUGETLBFS, but it applies to shmem + * (i.e. tmpfs and other shmem based APIs). */ -#if 0 /* not available yet */ #define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0) #define UFFD_FEATURE_EVENT_FORK (1<<1) -#endif +#define UFFD_FEATURE_EVENT_REMAP (1<<2) +#define UFFD_FEATURE_EVENT_MADVDONTNEED (1<<3) +#define UFFD_FEATURE_MISSING_HUGETLBFS (1<<4) +#define UFFD_FEATURE_MISSING_SHMEM (1<<5) __u64 features; __u64 ioctls; diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/vfio.h +++ b/linux-headers/linux/vfio.h @@ -XXX,XX +XXX,XX @@ struct vfio_device_info { }; #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) +/* + * Vendor driver using Mediated device framework should provide device_api + * attribute in supported type attribute groups. Device API string should be one + * of the following corresponding to device flags in vfio_device_info structure. + */ + +#define VFIO_DEVICE_API_PCI_STRING "vfio-pci" +#define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform" +#define VFIO_DEVICE_API_AMBA_STRING "vfio-amba" + /** * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, * struct vfio_region_info) -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> To Save and Restore ICC_SRE_EL1 register introduce vmstate subsection and load only if non-zero. Also initialize icc_sre_el1 with to 0x7 in pre_load function. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-3-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gicv3_common.h | 1 + hw/intc/arm_gicv3_common.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { uint8_t gicr_ipriorityr[GIC_INTERNAL]; /* CPU interface */ + uint64_t icc_sre_el1; uint64_t icc_ctlr_el1[2]; uint64_t icc_pmr_el1; uint64_t icc_bpr[3]; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu_virt = { } }; +static int icc_sre_el1_reg_pre_load(void *opaque) +{ + GICv3CPUState *cs = opaque; + + /* + * If the sre_el1 subsection is not transferred this + * means SRE_EL1 is 0x7 (which might not be the same as + * our reset value). + */ + cs->icc_sre_el1 = 0x7; + return 0; +} + +static bool icc_sre_el1_reg_needed(void *opaque) +{ + GICv3CPUState *cs = opaque; + + return cs->icc_sre_el1 != 7; +} + +const VMStateDescription vmstate_gicv3_cpu_sre_el1 = { + .name = "arm_gicv3_cpu/sre_el1", + .version_id = 1, + .minimum_version_id = 1, + .pre_load = icc_sre_el1_reg_pre_load, + .needed = icc_sre_el1_reg_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT64(icc_sre_el1, GICv3CPUState), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3_cpu = { .name = "arm_gicv3_cpu", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu = { .subsections = (const VMStateDescription * []) { &vmstate_gicv3_cpu_virt, NULL + }, + .subsections = (const VMStateDescription * []) { + &vmstate_gicv3_cpu_sre_el1, + NULL } }; -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> This actually implements pre_save and post_load methods for in-kernel vGICv3. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Message-id: 1487850673-26455-4-git-send-email-vijay.kilari@gmail.com [PMM: * use decimal, not 0bnnn * fixed typo in names of ICC_APR0R_EL1 and ICC_AP1R_EL1 * completely rearranged the get and put functions to read and write the state in a natural order, rather than mixing distributor and redistributor state together] Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> [Vijay: * Update macro KVM_VGIC_ATTR * Use 32 bit access for gicd and gicr * GICD_IROUTER, GICD_TYPER, GICR_PROPBASER and GICR_PENDBASER reg access are changed from 64-bit to 32-bit access * Add ICC_SRE_EL1 save and restore * Dropped translate_fn mechanism and coded functions to handle save and restore of edge_trigger and priority * Number of APnR register saved/restored based on number of priority bits supported] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 1 + hw/intc/arm_gicv3_kvm.c | 573 +++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 558 insertions(+), 16 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define ICC_CTLR_EL1_EOIMODE (1U << 1) #define ICC_CTLR_EL1_PMHE (1U << 6) #define ICC_CTLR_EL1_PRIBITS_SHIFT 8 +#define ICC_CTLR_EL1_PRIBITS_MASK (7U << ICC_CTLR_EL1_PRIBITS_SHIFT) #define ICC_CTLR_EL1_IDBITS_SHIFT 11 #define ICC_CTLR_EL1_SEIS (1U << 14) #define ICC_CTLR_EL1_A3V (1U << 15) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/sysbus.h" +#include "qemu/error-report.h" #include "sysemu/kvm.h" #include "kvm_arm.h" +#include "gicv3_internal.h" #include "vgic_common.h" #include "migration/migration.h" @@ -XXX,XX +XXX,XX @@ #define KVM_ARM_GICV3_GET_CLASS(obj) \ OBJECT_GET_CLASS(KVMARMGICv3Class, (obj), TYPE_KVM_ARM_GICV3) +#define KVM_DEV_ARM_VGIC_SYSREG(op0, op1, crn, crm, op2) \ + (ARM64_SYS_REG_SHIFT_MASK(op0, OP0) | \ + ARM64_SYS_REG_SHIFT_MASK(op1, OP1) | \ + ARM64_SYS_REG_SHIFT_MASK(crn, CRN) | \ + ARM64_SYS_REG_SHIFT_MASK(crm, CRM) | \ + ARM64_SYS_REG_SHIFT_MASK(op2, OP2)) + +#define ICC_PMR_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 4, 6, 0) +#define ICC_BPR0_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 8, 3) +#define ICC_AP0R_EL1(n) \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 8, 4 | n) +#define ICC_AP1R_EL1(n) \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 9, n) +#define ICC_BPR1_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 3) +#define ICC_CTLR_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 4) +#define ICC_SRE_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 5) +#define ICC_IGRPEN0_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 6) +#define ICC_IGRPEN1_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 7) + typedef struct KVMARMGICv3Class { ARMGICv3CommonClass parent_class; DeviceRealize parent_realize; @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_set_irq(void *opaque, int irq, int level) kvm_arm_gic_set_irq(s->num_irq, irq, level); } +#define KVM_VGIC_ATTR(reg, typer) \ + ((typer & KVM_DEV_ARM_VGIC_V3_MPIDR_MASK) | (reg)) + +static inline void kvm_gicd_access(GICv3State *s, int offset, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, + KVM_VGIC_ATTR(offset, 0), + val, write); +} + +static inline void kvm_gicr_access(GICv3State *s, int offset, int cpu, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS, + KVM_VGIC_ATTR(offset, s->cpu[cpu].gicr_typer), + val, write); +} + +static inline void kvm_gicc_access(GICv3State *s, uint64_t reg, int cpu, + uint64_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, + KVM_VGIC_ATTR(reg, s->cpu[cpu].gicr_typer), + val, write); +} + +static inline void kvm_gic_line_level_access(GICv3State *s, int irq, int cpu, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO, + KVM_VGIC_ATTR(irq, s->cpu[cpu].gicr_typer) | + (VGIC_LEVEL_INFO_LINE_LEVEL << + KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT), + val, write); +} + +/* Loop through each distributor IRQ related register; since bits + * corresponding to SPIs and PPIs are RAZ/WI when affinity routing + * is enabled, we skip those. + */ +#define for_each_dist_irq_reg(_irq, _max, _field_width) \ + for (_irq = GIC_INTERNAL; _irq < _max; _irq += (32 / _field_width)) + +static void kvm_dist_get_priority(GICv3State *s, uint32_t offset, uint8_t *bmp) +{ + uint32_t reg, *field; + int irq; + + field = (uint32_t *)bmp; + for_each_dist_irq_reg(irq, s->num_irq, 8) { + kvm_gicd_access(s, offset, &reg, false); + *field = reg; + offset += 4; + field++; + } +} + +static void kvm_dist_put_priority(GICv3State *s, uint32_t offset, uint8_t *bmp) +{ + uint32_t reg, *field; + int irq; + + field = (uint32_t *)bmp; + for_each_dist_irq_reg(irq, s->num_irq, 8) { + reg = *field; + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + field++; + } +} + +static void kvm_dist_get_edge_trigger(GICv3State *s, uint32_t offset, + uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 2) { + kvm_gicd_access(s, offset, &reg, false); + reg = half_unshuffle32(reg >> 1); + if (irq % 32 != 0) { + reg = (reg << 16); + } + *gic_bmp_ptr32(bmp, irq) |= reg; + offset += 4; + } +} + +static void kvm_dist_put_edge_trigger(GICv3State *s, uint32_t offset, + uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 2) { + reg = *gic_bmp_ptr32(bmp, irq); + if (irq % 32 != 0) { + reg = (reg & 0xffff0000) >> 16; + } else { + reg = reg & 0xffff; + } + reg = half_shuffle32(reg) << 1; + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + } +} + +static void kvm_gic_get_line_level_bmp(GICv3State *s, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + kvm_gic_line_level_access(s, irq, 0, &reg, false); + *gic_bmp_ptr32(bmp, irq) = reg; + } +} + +static void kvm_gic_put_line_level_bmp(GICv3State *s, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + reg = *gic_bmp_ptr32(bmp, irq); + kvm_gic_line_level_access(s, irq, 0, &reg, true); + } +} + +/* Read a bitmap register group from the kernel VGIC. */ +static void kvm_dist_getbmp(GICv3State *s, uint32_t offset, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + kvm_gicd_access(s, offset, &reg, false); + *gic_bmp_ptr32(bmp, irq) = reg; + offset += 4; + } +} + +static void kvm_dist_putbmp(GICv3State *s, uint32_t offset, + uint32_t clroffset, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + /* If this bitmap is a set/clear register pair, first write to the + * clear-reg to clear all bits before using the set-reg to write + * the 1 bits. + */ + if (clroffset != 0) { + reg = 0; + kvm_gicd_access(s, clroffset, &reg, true); + } + reg = *gic_bmp_ptr32(bmp, irq); + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + } +} + +static void kvm_arm_gicv3_check(GICv3State *s) +{ + uint32_t reg; + uint32_t num_irq; + + /* Sanity checking s->num_irq */ + kvm_gicd_access(s, GICD_TYPER, &reg, false); + num_irq = ((reg & 0x1f) + 1) * 32; + + if (num_irq < s->num_irq) { + error_report("Model requests %u IRQs, but kernel supports max %u", + s->num_irq, num_irq); + abort(); + } +} + static void kvm_arm_gicv3_put(GICv3State *s) { - /* TODO */ - DPRINTF("Cannot put kernel gic state, no kernel interface\n"); + uint32_t regl, regh, reg; + uint64_t reg64, redist_typer; + int ncpu, i; + + kvm_arm_gicv3_check(s); + + kvm_gicr_access(s, GICR_TYPER, 0, &regl, false); + kvm_gicr_access(s, GICR_TYPER + 4, 0, &regh, false); + redist_typer = ((uint64_t)regh << 32) | regl; + + reg = s->gicd_ctlr; + kvm_gicd_access(s, GICD_CTLR, &reg, true); + + if (redist_typer & GICR_TYPER_PLPIS) { + /* Set base addresses before LPIs are enabled by GICR_CTLR write */ + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + reg64 = c->gicr_propbaser; + regl = (uint32_t)reg64; + kvm_gicr_access(s, GICR_PROPBASER, ncpu, &regl, true); + regh = (uint32_t)(reg64 >> 32); + kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, true); + + reg64 = c->gicr_pendbaser; + if (!c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) { + /* Setting PTZ is advised if LPIs are disabled, to reduce + * GIC initialization time. + */ + reg64 |= GICR_PENDBASER_PTZ; + } + regl = (uint32_t)reg64; + kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, true); + regh = (uint32_t)(reg64 >> 32); + kvm_gicr_access(s, GICR_PENDBASER + 4, ncpu, &regh, true); + } + } + + /* Redistributor state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + reg = c->gicr_ctlr; + kvm_gicr_access(s, GICR_CTLR, ncpu, &reg, true); + + reg = c->gicr_statusr[GICV3_NS]; + kvm_gicr_access(s, GICR_STATUSR, ncpu, &reg, true); + + reg = c->gicr_waker; + kvm_gicr_access(s, GICR_WAKER, ncpu, &reg, true); + + reg = c->gicr_igroupr0; + kvm_gicr_access(s, GICR_IGROUPR0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICENABLER0, ncpu, &reg, true); + reg = c->gicr_ienabler0; + kvm_gicr_access(s, GICR_ISENABLER0, ncpu, &reg, true); + + /* Restore config before pending so we treat level/edge correctly */ + reg = half_shuffle32(c->edge_trigger >> 16) << 1; + kvm_gicr_access(s, GICR_ICFGR1, ncpu, &reg, true); + + reg = c->level; + kvm_gic_line_level_access(s, 0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICPENDR0, ncpu, &reg, true); + reg = c->gicr_ipendr0; + kvm_gicr_access(s, GICR_ISPENDR0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICACTIVER0, ncpu, &reg, true); + reg = c->gicr_iactiver0; + kvm_gicr_access(s, GICR_ISACTIVER0, ncpu, &reg, true); + + for (i = 0; i < GIC_INTERNAL; i += 4) { + reg = c->gicr_ipriorityr[i] | + (c->gicr_ipriorityr[i + 1] << 8) | + (c->gicr_ipriorityr[i + 2] << 16) | + (c->gicr_ipriorityr[i + 3] << 24); + kvm_gicr_access(s, GICR_IPRIORITYR + i, ncpu, &reg, true); + } + } + + /* Distributor state (shared between all CPUs */ + reg = s->gicd_statusr[GICV3_NS]; + kvm_gicd_access(s, GICD_STATUSR, &reg, true); + + /* s->enable bitmap -> GICD_ISENABLERn */ + kvm_dist_putbmp(s, GICD_ISENABLER, GICD_ICENABLER, s->enabled); + + /* s->group bitmap -> GICD_IGROUPRn */ + kvm_dist_putbmp(s, GICD_IGROUPR, 0, s->group); + + /* Restore targets before pending to ensure the pending state is set on + * the appropriate CPU interfaces in the kernel + */ + + /* s->gicd_irouter[irq] -> GICD_IROUTERn + * We can't use kvm_dist_put() here because the registers are 64-bit + */ + for (i = GIC_INTERNAL; i < s->num_irq; i++) { + uint32_t offset; + + offset = GICD_IROUTER + (sizeof(uint32_t) * i); + reg = (uint32_t)s->gicd_irouter[i]; + kvm_gicd_access(s, offset, &reg, true); + + offset = GICD_IROUTER + (sizeof(uint32_t) * i) + 4; + reg = (uint32_t)(s->gicd_irouter[i] >> 32); + kvm_gicd_access(s, offset, &reg, true); + } + + /* s->trigger bitmap -> GICD_ICFGRn + * (restore configuration registers before pending IRQs so we treat + * level/edge correctly) + */ + kvm_dist_put_edge_trigger(s, GICD_ICFGR, s->edge_trigger); + + /* s->level bitmap -> line_level */ + kvm_gic_put_line_level_bmp(s, s->level); + + /* s->pending bitmap -> GICD_ISPENDRn */ + kvm_dist_putbmp(s, GICD_ISPENDR, GICD_ICPENDR, s->pending); + + /* s->active bitmap -> GICD_ISACTIVERn */ + kvm_dist_putbmp(s, GICD_ISACTIVER, GICD_ICACTIVER, s->active); + + /* s->gicd_ipriority[] -> GICD_IPRIORITYRn */ + kvm_dist_put_priority(s, GICD_IPRIORITYR, s->gicd_ipriority); + + /* CPU Interface state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + int num_pri_bits; + + kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, true); + kvm_gicc_access(s, ICC_CTLR_EL1, ncpu, + &c->icc_ctlr_el1[GICV3_NS], true); + kvm_gicc_access(s, ICC_IGRPEN0_EL1, ncpu, + &c->icc_igrpen[GICV3_G0], true); + kvm_gicc_access(s, ICC_IGRPEN1_EL1, ncpu, + &c->icc_igrpen[GICV3_G1NS], true); + kvm_gicc_access(s, ICC_PMR_EL1, ncpu, &c->icc_pmr_el1, true); + kvm_gicc_access(s, ICC_BPR0_EL1, ncpu, &c->icc_bpr[GICV3_G0], true); + kvm_gicc_access(s, ICC_BPR1_EL1, ncpu, &c->icc_bpr[GICV3_G1NS], true); + + num_pri_bits = ((c->icc_ctlr_el1[GICV3_NS] & + ICC_CTLR_EL1_PRIBITS_MASK) >> + ICC_CTLR_EL1_PRIBITS_SHIFT) + 1; + + switch (num_pri_bits) { + case 7: + reg64 = c->icc_apr[GICV3_G0][3]; + kvm_gicc_access(s, ICC_AP0R_EL1(3), ncpu, &reg64, true); + reg64 = c->icc_apr[GICV3_G0][2]; + kvm_gicc_access(s, ICC_AP0R_EL1(2), ncpu, &reg64, true); + case 6: + reg64 = c->icc_apr[GICV3_G0][1]; + kvm_gicc_access(s, ICC_AP0R_EL1(1), ncpu, &reg64, true); + default: + reg64 = c->icc_apr[GICV3_G0][0]; + kvm_gicc_access(s, ICC_AP0R_EL1(0), ncpu, &reg64, true); + } + + switch (num_pri_bits) { + case 7: + reg64 = c->icc_apr[GICV3_G1NS][3]; + kvm_gicc_access(s, ICC_AP1R_EL1(3), ncpu, &reg64, true); + reg64 = c->icc_apr[GICV3_G1NS][2]; + kvm_gicc_access(s, ICC_AP1R_EL1(2), ncpu, &reg64, true); + case 6: + reg64 = c->icc_apr[GICV3_G1NS][1]; + kvm_gicc_access(s, ICC_AP1R_EL1(1), ncpu, &reg64, true); + default: + reg64 = c->icc_apr[GICV3_G1NS][0]; + kvm_gicc_access(s, ICC_AP1R_EL1(0), ncpu, &reg64, true); + } + } } static void kvm_arm_gicv3_get(GICv3State *s) { - /* TODO */ - DPRINTF("Cannot get kernel gic state, no kernel interface\n"); + uint32_t regl, regh, reg; + uint64_t reg64, redist_typer; + int ncpu, i; + + kvm_arm_gicv3_check(s); + + kvm_gicr_access(s, GICR_TYPER, 0, &regl, false); + kvm_gicr_access(s, GICR_TYPER + 4, 0, &regh, false); + redist_typer = ((uint64_t)regh << 32) | regl; + + kvm_gicd_access(s, GICD_CTLR, &reg, false); + s->gicd_ctlr = reg; + + /* Redistributor state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + kvm_gicr_access(s, GICR_CTLR, ncpu, &reg, false); + c->gicr_ctlr = reg; + + kvm_gicr_access(s, GICR_STATUSR, ncpu, &reg, false); + c->gicr_statusr[GICV3_NS] = reg; + + kvm_gicr_access(s, GICR_WAKER, ncpu, &reg, false); + c->gicr_waker = reg; + + kvm_gicr_access(s, GICR_IGROUPR0, ncpu, &reg, false); + c->gicr_igroupr0 = reg; + kvm_gicr_access(s, GICR_ISENABLER0, ncpu, &reg, false); + c->gicr_ienabler0 = reg; + kvm_gicr_access(s, GICR_ICFGR1, ncpu, &reg, false); + c->edge_trigger = half_unshuffle32(reg >> 1) << 16; + kvm_gic_line_level_access(s, 0, ncpu, &reg, false); + c->level = reg; + kvm_gicr_access(s, GICR_ISPENDR0, ncpu, &reg, false); + c->gicr_ipendr0 = reg; + kvm_gicr_access(s, GICR_ISACTIVER0, ncpu, &reg, false); + c->gicr_iactiver0 = reg; + + for (i = 0; i < GIC_INTERNAL; i += 4) { + kvm_gicr_access(s, GICR_IPRIORITYR + i, ncpu, &reg, false); + c->gicr_ipriorityr[i] = extract32(reg, 0, 8); + c->gicr_ipriorityr[i + 1] = extract32(reg, 8, 8); + c->gicr_ipriorityr[i + 2] = extract32(reg, 16, 8); + c->gicr_ipriorityr[i + 3] = extract32(reg, 24, 8); + } + } + + if (redist_typer & GICR_TYPER_PLPIS) { + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + kvm_gicr_access(s, GICR_PROPBASER, ncpu, &regl, false); + kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, false); + c->gicr_propbaser = ((uint64_t)regh << 32) | regl; + + kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, false); + kvm_gicr_access(s, GICR_PENDBASER + 4, ncpu, &regh, false); + c->gicr_pendbaser = ((uint64_t)regh << 32) | regl; + } + } + + /* Distributor state (shared between all CPUs */ + + kvm_gicd_access(s, GICD_STATUSR, &reg, false); + s->gicd_statusr[GICV3_NS] = reg; + + /* GICD_IGROUPRn -> s->group bitmap */ + kvm_dist_getbmp(s, GICD_IGROUPR, s->group); + + /* GICD_ISENABLERn -> s->enabled bitmap */ + kvm_dist_getbmp(s, GICD_ISENABLER, s->enabled); + + /* Line level of irq */ + kvm_gic_get_line_level_bmp(s, s->level); + /* GICD_ISPENDRn -> s->pending bitmap */ + kvm_dist_getbmp(s, GICD_ISPENDR, s->pending); + + /* GICD_ISACTIVERn -> s->active bitmap */ + kvm_dist_getbmp(s, GICD_ISACTIVER, s->active); + + /* GICD_ICFGRn -> s->trigger bitmap */ + kvm_dist_get_edge_trigger(s, GICD_ICFGR, s->edge_trigger); + + /* GICD_IPRIORITYRn -> s->gicd_ipriority[] */ + kvm_dist_get_priority(s, GICD_IPRIORITYR, s->gicd_ipriority); + + /* GICD_IROUTERn -> s->gicd_irouter[irq] */ + for (i = GIC_INTERNAL; i < s->num_irq; i++) { + uint32_t offset; + + offset = GICD_IROUTER + (sizeof(uint32_t) * i); + kvm_gicd_access(s, offset, &regl, false); + offset = GICD_IROUTER + (sizeof(uint32_t) * i) + 4; + kvm_gicd_access(s, offset, &regh, false); + s->gicd_irouter[i] = ((uint64_t)regh << 32) | regl; + } + + /***************************************************************** + * CPU Interface(s) State + */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + int num_pri_bits; + + kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, false); + kvm_gicc_access(s, ICC_CTLR_EL1, ncpu, + &c->icc_ctlr_el1[GICV3_NS], false); + kvm_gicc_access(s, ICC_IGRPEN0_EL1, ncpu, + &c->icc_igrpen[GICV3_G0], false); + kvm_gicc_access(s, ICC_IGRPEN1_EL1, ncpu, + &c->icc_igrpen[GICV3_G1NS], false); + kvm_gicc_access(s, ICC_PMR_EL1, ncpu, &c->icc_pmr_el1, false); + kvm_gicc_access(s, ICC_BPR0_EL1, ncpu, &c->icc_bpr[GICV3_G0], false); + kvm_gicc_access(s, ICC_BPR1_EL1, ncpu, &c->icc_bpr[GICV3_G1NS], false); + num_pri_bits = ((c->icc_ctlr_el1[GICV3_NS] & + ICC_CTLR_EL1_PRIBITS_MASK) >> + ICC_CTLR_EL1_PRIBITS_SHIFT) + 1; + + switch (num_pri_bits) { + case 7: + kvm_gicc_access(s, ICC_AP0R_EL1(3), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][3] = reg64; + kvm_gicc_access(s, ICC_AP0R_EL1(2), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][2] = reg64; + case 6: + kvm_gicc_access(s, ICC_AP0R_EL1(1), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][1] = reg64; + default: + kvm_gicc_access(s, ICC_AP0R_EL1(0), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][0] = reg64; + } + + switch (num_pri_bits) { + case 7: + kvm_gicc_access(s, ICC_AP1R_EL1(3), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][3] = reg64; + kvm_gicc_access(s, ICC_AP1R_EL1(2), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][2] = reg64; + case 6: + kvm_gicc_access(s, ICC_AP1R_EL1(1), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][1] = reg64; + default: + kvm_gicc_access(s, ICC_AP1R_EL1(0), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][0] = reg64; + } + } } static void kvm_arm_gicv3_reset(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset(DeviceState *dev) DPRINTF("Reset\n"); kgc->parent_reset(dev); + + if (s->migration_blocker) { + DPRINTF("Cannot put kernel gic state, no kernel interface\n"); + return; + } + kvm_arm_gicv3_put(s); } @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); - /* Block migration of a KVM GICv3 device: the API for saving and restoring - * the state in the kernel is not yet finalised in the kernel or - * implemented in QEMU. - */ - error_setg(&s->migration_blocker, "vGICv3 migration is not implemented"); - migrate_add_blocker(s->migration_blocker, &local_err); - if (local_err) { - error_propagate(errp, local_err); - error_free(s->migration_blocker); - return; - } - /* Try to create the device via the device control API */ s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, false); if (s->dev_fd < 0) { @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) kvm_irqchip_commit_routes(kvm_state); } + + if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, + GICD_CTLR)) { + error_setg(&s->migration_blocker, "This operating system kernel does " + "not support vGICv3 migration"); + migrate_add_blocker(s->migration_blocker, &local_err); + if (local_err) { + error_propagate(errp, local_err); + error_free(s->migration_blocker); + return; + } + } } static void kvm_arm_gicv3_class_init(ObjectClass *klass, void *data) -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Add gicv3state void pointer to CPUARMState struct to store GICv3CPUState. In case of usecase like CPU reset, we need to reset GICv3CPUState of the CPU. In such scenario, this pointer becomes handy. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-5-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 2 ++ target/arm/cpu.h | 2 ++ hw/intc/arm_gicv3_common.c | 2 ++ hw/intc/arm_gicv3_cpuif.c | 8 ++++++++ 4 files changed, 14 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ static inline void gicv3_cache_all_target_cpustates(GICv3State *s) } } +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s); + #endif /* QEMU_ARM_GICV3_INTERNAL_H */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { void *nvic; const struct arm_boot_info *boot_info; + /* Store GICv3CPUState to access from this struct */ + void *gicv3state; } CPUARMState; /** diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp) s->cpu[i].cpu = cpu; s->cpu[i].gic = s; + /* Store GICv3CPUState in CPUARMState gicv3state pointer */ + gicv3_set_gicv3state(cpu, &s->cpu[i]); /* Pre-construct the GICR_TYPER: * For our implementation: diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ #include "gicv3_internal.h" #include "cpu.h" +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + env->gicv3state = (void *)s; +}; + static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { /* Given the CPU, find the right GICv3CPUState struct. -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reset CPU interface registers of GICv3 when CPU is reset. For this, ARMCPRegInfo struct is registered with one ICC register whose resetfn is called when cpu is reset. All the ICC registers are reset under one single register reset function instead of calling resetfn for each ICC register. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-6-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_get(GICv3State *s) } } +static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu; + GICv3State *s; + GICv3CPUState *c; + + c = (GICv3CPUState *)env->gicv3state; + s = c->gic; + cpu = ARM_CPU(c->cpu); + + /* Initialize to actual HW supported configuration */ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, + KVM_VGIC_ATTR(ICC_CTLR_EL1, cpu->mp_affinity), + &c->icc_ctlr_el1[GICV3_NS], false); + + c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS]; + c->icc_pmr_el1 = 0; + c->icc_bpr[GICV3_G0] = GIC_MIN_BPR; + c->icc_bpr[GICV3_G1] = GIC_MIN_BPR; + c->icc_bpr[GICV3_G1NS] = GIC_MIN_BPR; + + c->icc_sre_el1 = 0x7; + memset(c->icc_apr, 0, sizeof(c->icc_apr)); + memset(c->icc_igrpen, 0, sizeof(c->icc_igrpen)); +} + static void kvm_arm_gicv3_reset(DeviceState *dev) { GICv3State *s = ARM_GICV3_COMMON(dev); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset(DeviceState *dev) kvm_arm_gicv3_put(s); } +/* + * CPU interface registers of GIC needs to be reset on CPU reset. + * For the calling arm_gicv3_icc_reset() on CPU reset, we register + * below ARMCPRegInfo. As we reset the whole cpu interface under single + * register reset, we define only one register of CPU interface instead + * of defining all the registers. + */ +static const ARMCPRegInfo gicv3_cpuif_reginfo[] = { + { .name = "ICC_CTLR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 4, + /* + * If ARM_CP_NOP is used, resetfn is not called, + * So ARM_CP_NO_RAW is appropriate type. + */ + .type = ARM_CP_NO_RAW, + .access = PL1_RW, + .readfn = arm_cp_read_zero, + .writefn = arm_cp_write_ignore, + /* + * We hang the whole cpu interface reset routine off here + * rather than parcelling it out into one little function + * per register + */ + .resetfn = arm_gicv3_icc_reset, + }, + REGINFO_SENTINEL +}; + static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) { GICv3State *s = KVM_ARM_GICV3(dev); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); + for (i = 0; i < s->num_cpu; i++) { + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i)); + + define_arm_cp_regs(cpu, gicv3_cpuif_reginfo); + } + /* Try to create the device via the device control API */ s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, false); if (s->dev_fd < 0) { -- 2.7.4 Instead of qdev_set_parent_bus() silently doing the wrong thing if it's handed a device that's already on a bus, have it remove the device from the old bus and add it to the new one. This is useful for the raspi2 sdcard. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1488293711-14195-2-git-send-email-peter.maydell@linaro.org --- hw/core/qdev.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void bus_add_child(BusState *bus, DeviceState *child) void qdev_set_parent_bus(DeviceState *dev, BusState *bus) { + bool replugging = dev->parent_bus != NULL; + + if (replugging) { + /* Keep a reference to the device while it's not plugged into + * any bus, to avoid it potentially evaporating when it is + * dereffed in bus_remove_child(). + */ + object_ref(OBJECT(dev)); + bus_remove_child(dev->parent_bus, dev); + object_unref(OBJECT(dev->parent_bus)); + } dev->parent_bus = bus; object_ref(OBJECT(bus)); bus_add_child(bus, dev); + if (replugging) { + object_unref(OBJECT(dev)); + } } /* Create a new device. This only initializes the device state -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> Provide a new function sdbus_reparent_card() in sd core for reparenting a card from a SDBus to another one. This function is required by the raspi platform, where the two SD controllers can be dynamically switched. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-3-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-3-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added a doc comment to the header file; changed to use new behaviour of qdev_set_parent_bus()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sd.h | 11 +++++++++++ hw/sd/core.c | 27 +++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sd.h +++ b/include/hw/sd/sd.h @@ -XXX,XX +XXX,XX @@ uint8_t sdbus_read_data(SDBus *sd); bool sdbus_data_ready(SDBus *sd); bool sdbus_get_inserted(SDBus *sd); bool sdbus_get_readonly(SDBus *sd); +/** + * sdbus_reparent_card: Reparent an SD card from one controller to another + * @from: controller bus to remove card from + * @to: controller bus to move card to + * + * Reparent an SD card, effectively unplugging it from one controller + * and inserting it into another. This is useful for SoCs like the + * bcm2835 which have two SD controllers and connect a single SD card + * to them, selected by the guest reprogramming GPIO line routing. + */ +void sdbus_reparent_card(SDBus *from, SDBus *to); /* Functions to be used by SD devices to report back to qdevified controllers */ void sdbus_set_inserted(SDBus *sd, bool inserted); diff --git a/hw/sd/core.c b/hw/sd/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/core.c +++ b/hw/sd/core.c @@ -XXX,XX +XXX,XX @@ void sdbus_set_readonly(SDBus *sdbus, bool readonly) } } +void sdbus_reparent_card(SDBus *from, SDBus *to) +{ + SDState *card = get_card(from); + SDCardClass *sc; + bool readonly; + + /* We directly reparent the card object rather than implementing this + * as a hotpluggable connection because we don't want to expose SD cards + * to users as being hotpluggable, and we can get away with it in this + * limited use case. This could perhaps be implemented more cleanly in + * future by adding support to the hotplug infrastructure for "device + * can be hotplugged only via code, not by user". + */ + + if (!card) { + return; + } + + sc = SD_CARD_GET_CLASS(card); + readonly = sc->get_readonly(card); + + sdbus_set_inserted(from, false); + qdev_set_parent_bus(DEVICE(card), &to->qbus); + sdbus_set_inserted(to, true); + sdbus_set_readonly(to, readonly); +} + static const TypeInfo sd_bus_info = { .name = TYPE_SD_BUS, .parent = TYPE_BUS, -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> This adds the BCM2835 GPIO controller. It currently implements: - The 54 GPIOs as outputs (qemu_irq) - The SD controller selection via alternate function of GPIOs 48-53 Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-4-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-4-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/Makefile.objs | 1 + include/hw/gpio/bcm2835_gpio.h | 39 +++++ hw/gpio/bcm2835_gpio.c | 353 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 393 insertions(+) create mode 100644 include/hw/gpio/bcm2835_gpio.h create mode 100644 hw/gpio/bcm2835_gpio.c diff --git a/hw/gpio/Makefile.objs b/hw/gpio/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Makefile.objs +++ b/hw/gpio/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_GPIO_KEY) += gpio_key.o obj-$(CONFIG_OMAP) += omap_gpio.o obj-$(CONFIG_IMX) += imx_gpio.o +obj-$(CONFIG_RASPI) += bcm2835_gpio.o diff --git a/include/hw/gpio/bcm2835_gpio.h b/include/hw/gpio/bcm2835_gpio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/gpio/bcm2835_gpio.h @@ -XXX,XX +XXX,XX @@ +/* + * Raspberry Pi (BCM2835) GPIO Controller + * + * Copyright (c) 2017 Antfield SAS + * + * Authors: + * Clement Deschamps <clement.deschamps@antfield.fr> + * Luc Michel <luc.michel@antfield.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef BCM2835_GPIO_H +#define BCM2835_GPIO_H + +#include "hw/sd/sd.h" + +typedef struct BCM2835GpioState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + /* SDBus selector */ + SDBus sdbus; + SDBus *sdbus_sdhci; + SDBus *sdbus_sdhost; + + uint8_t fsel[54]; + uint32_t lev0, lev1; + uint8_t sd_fsel; + qemu_irq out[54]; +} BCM2835GpioState; + +#define TYPE_BCM2835_GPIO "bcm2835_gpio" +#define BCM2835_GPIO(obj) \ + OBJECT_CHECK(BCM2835GpioState, (obj), TYPE_BCM2835_GPIO) + +#endif diff --git a/hw/gpio/bcm2835_gpio.c b/hw/gpio/bcm2835_gpio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/bcm2835_gpio.c @@ -XXX,XX +XXX,XX @@ +/* + * Raspberry Pi (BCM2835) GPIO Controller + * + * Copyright (c) 2017 Antfield SAS + * + * Authors: + * Clement Deschamps <clement.deschamps@antfield.fr> + * Luc Michel <luc.michel@antfield.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/timer.h" +#include "qapi/error.h" +#include "hw/sysbus.h" +#include "hw/sd/sd.h" +#include "hw/gpio/bcm2835_gpio.h" + +#define GPFSEL0 0x00 +#define GPFSEL1 0x04 +#define GPFSEL2 0x08 +#define GPFSEL3 0x0C +#define GPFSEL4 0x10 +#define GPFSEL5 0x14 +#define GPSET0 0x1C +#define GPSET1 0x20 +#define GPCLR0 0x28 +#define GPCLR1 0x2C +#define GPLEV0 0x34 +#define GPLEV1 0x38 +#define GPEDS0 0x40 +#define GPEDS1 0x44 +#define GPREN0 0x4C +#define GPREN1 0x50 +#define GPFEN0 0x58 +#define GPFEN1 0x5C +#define GPHEN0 0x64 +#define GPHEN1 0x68 +#define GPLEN0 0x70 +#define GPLEN1 0x74 +#define GPAREN0 0x7C +#define GPAREN1 0x80 +#define GPAFEN0 0x88 +#define GPAFEN1 0x8C +#define GPPUD 0x94 +#define GPPUDCLK0 0x98 +#define GPPUDCLK1 0x9C + +static uint32_t gpfsel_get(BCM2835GpioState *s, uint8_t reg) +{ + int i; + uint32_t value = 0; + for (i = 0; i < 10; i++) { + uint32_t index = 10 * reg + i; + if (index < sizeof(s->fsel)) { + value |= (s->fsel[index] & 0x7) << (3 * i); + } + } + return value; +} + +static void gpfsel_set(BCM2835GpioState *s, uint8_t reg, uint32_t value) +{ + int i; + for (i = 0; i < 10; i++) { + uint32_t index = 10 * reg + i; + if (index < sizeof(s->fsel)) { + int fsel = (value >> (3 * i)) & 0x7; + s->fsel[index] = fsel; + } + } + + /* SD controller selection (48-53) */ + if (s->sd_fsel != 0 + && (s->fsel[48] == 0) /* SD_CLK_R */ + && (s->fsel[49] == 0) /* SD_CMD_R */ + && (s->fsel[50] == 0) /* SD_DATA0_R */ + && (s->fsel[51] == 0) /* SD_DATA1_R */ + && (s->fsel[52] == 0) /* SD_DATA2_R */ + && (s->fsel[53] == 0) /* SD_DATA3_R */ + ) { + /* SDHCI controller selected */ + sdbus_reparent_card(s->sdbus_sdhost, s->sdbus_sdhci); + s->sd_fsel = 0; + } else if (s->sd_fsel != 4 + && (s->fsel[48] == 4) /* SD_CLK_R */ + && (s->fsel[49] == 4) /* SD_CMD_R */ + && (s->fsel[50] == 4) /* SD_DATA0_R */ + && (s->fsel[51] == 4) /* SD_DATA1_R */ + && (s->fsel[52] == 4) /* SD_DATA2_R */ + && (s->fsel[53] == 4) /* SD_DATA3_R */ + ) { + /* SDHost controller selected */ + sdbus_reparent_card(s->sdbus_sdhci, s->sdbus_sdhost); + s->sd_fsel = 4; + } +} + +static int gpfsel_is_out(BCM2835GpioState *s, int index) +{ + if (index >= 0 && index < 54) { + return s->fsel[index] == 1; + } + return 0; +} + +static void gpset(BCM2835GpioState *s, + uint32_t val, uint8_t start, uint8_t count, uint32_t *lev) +{ + uint32_t changes = val & ~*lev; + uint32_t cur = 1; + + int i; + for (i = 0; i < count; i++) { + if ((changes & cur) && (gpfsel_is_out(s, start + i))) { + qemu_set_irq(s->out[start + i], 1); + } + cur <<= 1; + } + + *lev |= val; +} + +static void gpclr(BCM2835GpioState *s, + uint32_t val, uint8_t start, uint8_t count, uint32_t *lev) +{ + uint32_t changes = val & *lev; + uint32_t cur = 1; + + int i; + for (i = 0; i < count; i++) { + if ((changes & cur) && (gpfsel_is_out(s, start + i))) { + qemu_set_irq(s->out[start + i], 0); + } + cur <<= 1; + } + + *lev &= ~val; +} + +static uint64_t bcm2835_gpio_read(void *opaque, hwaddr offset, + unsigned size) +{ + BCM2835GpioState *s = (BCM2835GpioState *)opaque; + + switch (offset) { + case GPFSEL0: + case GPFSEL1: + case GPFSEL2: + case GPFSEL3: + case GPFSEL4: + case GPFSEL5: + return gpfsel_get(s, offset / 4); + case GPSET0: + case GPSET1: + /* Write Only */ + return 0; + case GPCLR0: + case GPCLR1: + /* Write Only */ + return 0; + case GPLEV0: + return s->lev0; + case GPLEV1: + return s->lev1; + case GPEDS0: + case GPEDS1: + case GPREN0: + case GPREN1: + case GPFEN0: + case GPFEN1: + case GPHEN0: + case GPHEN1: + case GPLEN0: + case GPLEN1: + case GPAREN0: + case GPAREN1: + case GPAFEN0: + case GPAFEN1: + case GPPUD: + case GPPUDCLK0: + case GPPUDCLK1: + /* Not implemented */ + return 0; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); + break; + } + + return 0; +} + +static void bcm2835_gpio_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + BCM2835GpioState *s = (BCM2835GpioState *)opaque; + + switch (offset) { + case GPFSEL0: + case GPFSEL1: + case GPFSEL2: + case GPFSEL3: + case GPFSEL4: + case GPFSEL5: + gpfsel_set(s, offset / 4, value); + break; + case GPSET0: + gpset(s, value, 0, 32, &s->lev0); + break; + case GPSET1: + gpset(s, value, 32, 22, &s->lev1); + break; + case GPCLR0: + gpclr(s, value, 0, 32, &s->lev0); + break; + case GPCLR1: + gpclr(s, value, 32, 22, &s->lev1); + break; + case GPLEV0: + case GPLEV1: + /* Read Only */ + break; + case GPEDS0: + case GPEDS1: + case GPREN0: + case GPREN1: + case GPFEN0: + case GPFEN1: + case GPHEN0: + case GPHEN1: + case GPLEN0: + case GPLEN1: + case GPAREN0: + case GPAREN1: + case GPAFEN0: + case GPAFEN1: + case GPPUD: + case GPPUDCLK0: + case GPPUDCLK1: + /* Not implemented */ + break; + default: + goto err_out; + } + return; + +err_out: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); +} + +static void bcm2835_gpio_reset(DeviceState *dev) +{ + BCM2835GpioState *s = BCM2835_GPIO(dev); + + int i; + for (i = 0; i < 6; i++) { + gpfsel_set(s, i, 0); + } + + s->sd_fsel = 0; + + /* SDHCI is selected by default */ + sdbus_reparent_card(&s->sdbus, s->sdbus_sdhci); + + s->lev0 = 0; + s->lev1 = 0; +} + +static const MemoryRegionOps bcm2835_gpio_ops = { + .read = bcm2835_gpio_read, + .write = bcm2835_gpio_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription vmstate_bcm2835_gpio = { + .name = "bcm2835_gpio", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(fsel, BCM2835GpioState, 54), + VMSTATE_UINT32(lev0, BCM2835GpioState), + VMSTATE_UINT32(lev1, BCM2835GpioState), + VMSTATE_UINT8(sd_fsel, BCM2835GpioState), + VMSTATE_END_OF_LIST() + } +}; + +static void bcm2835_gpio_init(Object *obj) +{ + BCM2835GpioState *s = BCM2835_GPIO(obj); + DeviceState *dev = DEVICE(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), + TYPE_SD_BUS, DEVICE(s), "sd-bus"); + + memory_region_init_io(&s->iomem, obj, + &bcm2835_gpio_ops, s, "bcm2835_gpio", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); + qdev_init_gpio_out(dev, s->out, 54); +} + +static void bcm2835_gpio_realize(DeviceState *dev, Error **errp) +{ + BCM2835GpioState *s = BCM2835_GPIO(dev); + Object *obj; + Error *err = NULL; + + obj = object_property_get_link(OBJECT(dev), "sdbus-sdhci", &err); + if (obj == NULL) { + error_setg(errp, "%s: required sdhci link not found: %s", + __func__, error_get_pretty(err)); + return; + } + s->sdbus_sdhci = SD_BUS(obj); + + obj = object_property_get_link(OBJECT(dev), "sdbus-sdhost", &err); + if (obj == NULL) { + error_setg(errp, "%s: required sdhost link not found: %s", + __func__, error_get_pretty(err)); + return; + } + s->sdbus_sdhost = SD_BUS(obj); +} + +static void bcm2835_gpio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_bcm2835_gpio; + dc->realize = &bcm2835_gpio_realize; + dc->reset = &bcm2835_gpio_reset; +} + +static const TypeInfo bcm2835_gpio_info = { + .name = TYPE_BCM2835_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835GpioState), + .instance_init = bcm2835_gpio_init, + .class_init = bcm2835_gpio_class_init, +}; + +static void bcm2835_gpio_register_types(void) +{ + type_register_static(&bcm2835_gpio_info); +} + +type_init(bcm2835_gpio_register_types) -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> This adds the bcm2835_sdhost and bcm2835_gpio to the BCM2835 platform. For supporting the SD controller selection (alternate function of GPIOs 48-53), the bcm2835_gpio now exposes an sdbus. It also has a link to both the sdbus of sdhci and sdhost controllers, and the card is reparented from one bus to another when the alternate function of GPIOs 48-53 is modified. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-5-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-5-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 4 ++++ hw/arm/bcm2835_peripherals.c | 43 ++++++++++++++++++++++++++++++++++-- 2 files changed, 45 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_rng.h" #include "hw/misc/bcm2835_mbox.h" #include "hw/sd/sdhci.h" +#include "hw/sd/bcm2835_sdhost.h" +#include "hw/gpio/bcm2835_gpio.h" #define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals" #define BCM2835_PERIPHERALS(obj) \ @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { BCM2835RngState rng; BCM2835MboxState mboxes; SDHCIState sdhci; + BCM2835SDHostState sdhost; + BCM2835GpioState gpio; } BCM2835PeripheralState; #endif /* BCM2835_PERIPHERALS_H */ diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) object_property_add_child(obj, "sdhci", OBJECT(&s->sdhci), NULL); qdev_set_parent_bus(DEVICE(&s->sdhci), sysbus_get_default()); + /* SDHOST */ + object_initialize(&s->sdhost, sizeof(s->sdhost), TYPE_BCM2835_SDHOST); + object_property_add_child(obj, "sdhost", OBJECT(&s->sdhost), NULL); + qdev_set_parent_bus(DEVICE(&s->sdhost), sysbus_get_default()); + /* DMA Channels */ object_initialize(&s->dma, sizeof(s->dma), TYPE_BCM2835_DMA); object_property_add_child(obj, "dma", OBJECT(&s->dma), NULL); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) object_property_add_const_link(OBJECT(&s->dma), "dma-mr", OBJECT(&s->gpu_bus_mr), &error_abort); + + /* GPIO */ + object_initialize(&s->gpio, sizeof(s->gpio), TYPE_BCM2835_GPIO); + object_property_add_child(obj, "gpio", OBJECT(&s->gpio), NULL); + qdev_set_parent_bus(DEVICE(&s->gpio), sysbus_get_default()); + + object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhci", + OBJECT(&s->sdhci.sdbus), &error_abort); + object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost", + OBJECT(&s->sdhost.sdbus), &error_abort); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, INTERRUPT_ARASANSDIO)); - object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->sdhci), "sd-bus", - &err); + + /* SDHOST */ + object_property_set_bool(OBJECT(&s->sdhost), true, "realized", &err); if (err) { error_propagate(errp, err); return; } + memory_region_add_subregion(&s->peri_mr, MMCI0_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->sdhost), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhost), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_SDIO)); + /* DMA Channels */ object_property_set_bool(OBJECT(&s->dma), true, "realized", &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) BCM2835_IC_GPU_IRQ, INTERRUPT_DMA0 + n)); } + + /* GPIO */ + object_property_set_bool(OBJECT(&s->gpio), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, GPIO_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0)); + + object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus", + &err); + if (err) { + error_propagate(errp, err); + return; + } } static void bcm2835_peripherals_class_init(ObjectClass *oc, void *data) -- 2.7.4 Arm queue; some of the simpler stuff, things other have reviewed (thanks!), etc. -- PMM The following changes since commit 5d2f557b47dfbf8f23277a5bdd8473d4607c681a: Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200605-pull-request' into staging (2020-06-05 13:53:05 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200605 for you to fetch changes up to 2c35a39eda0b16c2ed85c94cec204bf5efb97812: target/arm: Convert Neon one-register-and-immediate insns to decodetree (2020-06-05 17:23:10 +0100) ---------------------------------------------------------------- target-arm queue: hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace printf() call by qemu_log_mask() target/arm: Convert crypto insns to gvec hw/adc/stm32f2xx_adc: Correct memory region size and access size tests/acceptance: Add a boot test for the xlnx-versal-virt machine docs/system: Document Aspeed boards raspi: Add model of the USB controller target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree ---------------------------------------------------------------- Cédric Le Goater (1): docs/system: Document Aspeed boards Eden Mikitas (2): hw/ssi/imx_spi: changed while statement to prevent underflow hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave Paul Zimmerman (7): raspi: add BCM2835 SOC MPHI emulation dwc-hsotg (dwc2) USB host controller register definitions dwc-hsotg (dwc2) USB host controller state definitions dwc-hsotg (dwc2) USB host controller emulation usb: add short-packet handling to usb-storage driver wire in the dwc-hsotg (dwc2) USB host controller emulation raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host Peter Maydell (9): target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree target/arm: Convert Neon narrowing shifts with op==8 to decodetree target/arm: Convert Neon narrowing shifts with op==9 to decodetree target/arm: Convert Neon VSHLL, VMOVL to decodetree target/arm: Convert VCVT fixed-point ops to decodetree target/arm: Convert Neon one-register-and-immediate insns to decodetree Philippe Mathieu-Daudé (3): hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace printf() call by qemu_log_mask() hw/adc/stm32f2xx_adc: Correct memory region size and access size Richard Henderson (6): target/arm: Convert aes and sm4 to gvec helpers target/arm: Convert rax1 to gvec helpers target/arm: Convert sha512 and sm3 to gvec helpers target/arm: Convert sha1 and sha256 to gvec helpers target/arm: Split helper_crypto_sha1_3reg target/arm: Split helper_crypto_sm3tt Thomas Huth (1): tests/acceptance: Add a boot test for the xlnx-versal-virt machine docs/system/arm/aspeed.rst | 85 ++ docs/system/target-arm.rst | 1 + hw/usb/hcd-dwc2.h | 190 +++++ include/hw/arm/bcm2835_peripherals.h | 5 +- include/hw/misc/bcm2835_mphi.h | 44 + include/hw/usb/dwc2-regs.h | 899 ++++++++++++++++++++ target/arm/helper.h | 45 +- target/arm/translate-a64.h | 3 + target/arm/vec_internal.h | 33 + target/arm/neon-dp.decode | 214 ++++- hw/adc/stm32f2xx_adc.c | 4 +- hw/arm/bcm2835_peripherals.c | 38 +- hw/arm/pxa2xx.c | 66 +- hw/input/pxa2xx_keypad.c | 10 +- hw/misc/bcm2835_mphi.c | 191 +++++ hw/ssi/imx_spi.c | 4 +- hw/usb/dev-storage.c | 15 +- hw/usb/hcd-dwc2.c | 1417 ++++++++++++++++++++++++++++++++ target/arm/crypto_helper.c | 267 ++++-- target/arm/translate-a64.c | 198 ++--- target/arm/translate-neon.inc.c | 796 ++++++++++++++---- target/arm/translate.c | 539 +----------- target/arm/vec_helper.c | 12 +- hw/misc/Makefile.objs | 1 + hw/usb/Kconfig | 5 + hw/usb/Makefile.objs | 1 + hw/usb/trace-events | 50 ++ tests/acceptance/boot_linux_console.py | 35 +- 28 files changed, 4258 insertions(+), 910 deletions(-) create mode 100644 docs/system/arm/aspeed.rst create mode 100644 hw/usb/hcd-dwc2.h create mode 100644 include/hw/misc/bcm2835_mphi.h create mode 100644 include/hw/usb/dwc2-regs.h create mode 100644 target/arm/vec_internal.h create mode 100644 hw/misc/bcm2835_mphi.c create mode 100644 hw/usb/hcd-dwc2.c From: Eden Mikitas <e.mikitas@gmail.com> The while statement in question only checked if tx_burst is not 0. tx_burst is a signed int, which is assigned the value put by the guest driver in ECSPI_CONREG. The burst length can be anywhere between 1 and 4096, and since tx_burst is always decremented by 8 it could possibly underflow, causing an infinite loop. Signed-off-by: Eden Mikitas <e.mikitas@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) rx = 0; - while (tx_burst) { + while (tx_burst > 0) { uint8_t byte = tx & 0xff; DPRINTF("writing 0x%02x\n", (uint32_t)byte); -- 2.20.1 From: Eden Mikitas <e.mikitas@gmail.com> When inserting the value retrieved (rx) from the spi slave, rx is pushed to rx_fifo after being cast to uint8_t. rx_fifo is a fifo32, and the rx register the driver uses is also 32 bit. This zeroes the 24 most significant bits of rx. This proved problematic with devices that expect to use the whole 32 bits of the rx register. Signed-off-by: Eden Mikitas <e.mikitas@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) if (fifo32_is_full(&s->rx_fifo)) { s->regs[ECSPI_STATREG] |= ECSPI_STATREG_RO; } else { - fifo32_push(&s->rx_fifo, (uint8_t)rx); + fifo32_push(&s->rx_fifo, rx); } if (s->burst_length <= 0) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask() (missed in commit 5a0001ec7e). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200525114123.21317-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/input/pxa2xx_keypad.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/hw/input/pxa2xx_keypad.c b/hw/input/pxa2xx_keypad.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/pxa2xx_keypad.c +++ b/hw/input/pxa2xx_keypad.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "migration/vmstate.h" #include "hw/arm/pxa.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_keypad_read(void *opaque, hwaddr offset, return s->kpkdi; break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, offset); } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_keypad_write(void *opaque, hwaddr offset, break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, offset); } } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Replace printf() calls by qemu_log_mask(), which is disabled by default. This avoid flooding the terminal when fuzzing the device. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200525114123.21317-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx.c | 66 ++++++++++++++++++++++++++++++++++++------------- 1 file changed, 49 insertions(+), 17 deletions(-) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/blockdev.h" #include "sysemu/qtest.h" #include "qemu/cutils.h" +#include "qemu/log.h" static struct { hwaddr io_base; @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_pm_read(void *opaque, hwaddr addr, return s->pm_regs[addr >> 2]; default: fail: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_pm_write(void *opaque, hwaddr addr, s->pm_regs[addr >> 2] = value; break; } - - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_cm_read(void *opaque, hwaddr addr, return s->cm_regs[CCCR >> 2] | (3 << 28); default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_cm_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_mm_read(void *opaque, hwaddr addr, return s->mm_regs[addr >> 2]; /* fall through */ default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_mm_write(void *opaque, hwaddr addr, } default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_ssp_read(void *opaque, hwaddr addr, case SSACD: return s->ssacd; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_ssp_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_rtc_read(void *opaque, hwaddr addr, else return s->last_swcr; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_rtc_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_i2c_read(void *opaque, hwaddr addr, s->ibmr = 0; return s->ibmr; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_i2c_write(void *opaque, hwaddr addr, break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_i2s_read(void *opaque, hwaddr addr, } return 0; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_i2s_write(void *opaque, hwaddr addr, } break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_fir_read(void *opaque, hwaddr addr, case ICFOR: return s->rx_len; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad read offset 0x%"HWADDR_PRIx"\n", + __func__, addr); break; } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_fir_write(void *opaque, hwaddr addr, case ICFOR: break; default: - printf("%s: Bad register " REG_FMT "\n", __func__, addr); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad write offset 0x%"HWADDR_PRIx"\n", + __func__, addr); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> With this conversion, we will be able to use the same helpers with sve. In particular, pass 3 vector parameters for the 3-operand operations; for advsimd the destination register is also an input. This also fixes a bug in which we failed to clear the high bits of the SVE register after an AdvSIMD operation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 6 ++-- target/arm/vec_internal.h | 33 +++++++++++++++++ target/arm/crypto_helper.c | 72 +++++++++++++++++++++++++++----------- target/arm/translate-a64.c | 55 ++++++++++++++++++----------- target/arm/translate.c | 27 +++++++------- target/arm/vec_helper.c | 12 +------ 6 files changed, 138 insertions(+), 67 deletions(-) create mode 100644 target/arm/vec_internal.h diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(neon_qzip8, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_2(neon_qzip16, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_2(neon_qzip32, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) diff --git a/target/arm/vec_internal.h b/target/arm/vec_internal.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/vec_internal.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM AdvSIMD / SVE Vector Helpers + * + * Copyright (c) 2020 Linaro + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef TARGET_ARM_VEC_INTERNALS_H +#define TARGET_ARM_VEC_INTERNALS_H + +static inline void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) +{ + uint64_t *d = vd + opr_sz; + uintptr_t i; + + for (i = opr_sz; i < max_sz; i += 8) { + *d++ = 0; + } +} + +#endif /* TARGET_ARM_VEC_INTERNALS_H */ diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "exec/helper-proto.h" +#include "tcg/tcg-gvec-desc.h" #include "crypto/aes.h" +#include "vec_internal.h" union CRYPTO_STATE { uint8_t bytes[16]; @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { #define CR_ST_WORD(state, i) (state.words[i]) #endif -void HELPER(crypto_aese)(void *vd, void *vm, uint32_t decrypt) +static void do_crypto_aese(uint64_t *rd, uint64_t *rn, + uint64_t *rm, bool decrypt) { static uint8_t const * const sbox[2] = { AES_sbox, AES_isbox }; static uint8_t const * const shift[2] = { AES_shifts, AES_ishifts }; - uint64_t *rd = vd; - uint64_t *rm = vm; union CRYPTO_STATE rk = { .l = { rm[0], rm[1] } }; - union CRYPTO_STATE st = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE st = { .l = { rn[0], rn[1] } }; int i; - assert(decrypt < 2); - /* xor state vector with round key */ rk.l[0] ^= st.l[0]; rk.l[1] ^= st.l[1]; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aese)(void *vd, void *vm, uint32_t decrypt) rd[1] = st.l[1]; } -void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) +void HELPER(crypto_aese)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + bool decrypt = simd_data(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_aese(vd + i, vn + i, vm + i, decrypt); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + +static void do_crypto_aesmc(uint64_t *rd, uint64_t *rm, bool decrypt) { static uint32_t const mc[][256] = { { /* MixColumns lookup table */ @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) 0xbe805d9f, 0xb58d5491, 0xa89a4f83, 0xa397468d, } }; - uint64_t *rd = vd; - uint64_t *rm = vm; union CRYPTO_STATE st = { .l = { rm[0], rm[1] } }; int i; - assert(decrypt < 2); - for (i = 0; i < 16; i += 4) { CR_ST_WORD(st, i >> 2) = mc[decrypt][CR_ST_BYTE(st, i)] ^ @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t decrypt) rd[1] = st.l[1]; } +void HELPER(crypto_aesmc)(void *vd, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + bool decrypt = simd_data(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_aesmc(vd + i, vm + i, decrypt); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + /* * SHA-1 logical functions */ @@ -XXX,XX +XXX,XX @@ static uint8_t const sm4_sbox[] = { 0x79, 0xee, 0x5f, 0x3e, 0xd7, 0xcb, 0x39, 0x48, }; -void HELPER(crypto_sm4e)(void *vd, void *vn) +static void do_crypto_sm4e(uint64_t *rd, uint64_t *rn, uint64_t *rm) { - uint64_t *rd = vd; - uint64_t *rn = vn; - union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; - union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE d = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE n = { .l = { rm[0], rm[1] } }; uint32_t t, i; for (i = 0; i < 4; i++) { @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4e)(void *vd, void *vn) rd[1] = d.l[1]; } -void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm) +void HELPER(crypto_sm4e)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_sm4e(vd + i, vn + i, vm + i); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} + +static void do_crypto_sm4ekey(uint64_t *rd, uint64_t *rn, uint64_t *rm) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm) rd[0] = d.l[0]; rd[1] = d.l[1]; } + +void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + + for (i = 0; i < opr_sz; i += 16) { + do_crypto_sm4ekey(vd + i, vn + i, vm + i); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_fn4(DisasContext *s, bool is_q, int rd, int rn, int rm, is_q ? 16 : 8, vec_full_reg_size(s)); } +/* Expand a 2-operand operation using an out-of-line helper. */ +static void gen_gvec_op2_ool(DisasContext *s, bool is_q, int rd, + int rn, int data, gen_helper_gvec_2 *fn) +{ + tcg_gen_gvec_2_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + is_q ? 16 : 8, vec_full_reg_size(s), data, fn); +} + /* Expand a 3-operand operation using an out-of-line helper. */ static void gen_gvec_op3_ool(DisasContext *s, bool is_q, int rd, int rn, int rm, int data, gen_helper_gvec_3 *fn) @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); int decrypt; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; - TCGv_i32 tcg_decrypt; - CryptoThreeOpIntFn *genfn; + gen_helper_gvec_2 *genfn2 = NULL; + gen_helper_gvec_3 *genfn3 = NULL; if (!dc_isar_feature(aa64_aes, s) || size != 0) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) switch (opcode) { case 0x4: /* AESE */ decrypt = 0; - genfn = gen_helper_crypto_aese; + genfn3 = gen_helper_crypto_aese; break; case 0x6: /* AESMC */ decrypt = 0; - genfn = gen_helper_crypto_aesmc; + genfn2 = gen_helper_crypto_aesmc; break; case 0x5: /* AESD */ decrypt = 1; - genfn = gen_helper_crypto_aese; + genfn3 = gen_helper_crypto_aese; break; case 0x7: /* AESIMC */ decrypt = 1; - genfn = gen_helper_crypto_aesmc; + genfn2 = gen_helper_crypto_aesmc; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_decrypt = tcg_const_i32(decrypt); - - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_decrypt); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_i32(tcg_decrypt); + if (genfn2) { + gen_gvec_op2_ool(s, true, rd, rn, decrypt, genfn2); + } else { + gen_gvec_op3_ool(s, true, rd, rd, rn, decrypt, genfn3); + } } /* Crypto three-reg SHA @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool feature; - CryptoThreeOpFn *genfn; + CryptoThreeOpFn *genfn = NULL; + gen_helper_gvec_3 *oolfn = NULL; if (o == 0) { switch (opcode) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) break; case 2: /* SM4EKEY */ feature = dc_isar_feature(aa64_sm4, s); - genfn = gen_helper_crypto_sm4ekey; + oolfn = gen_helper_crypto_sm4ekey; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) return; } + if (oolfn) { + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); + return; + } + if (genfn) { TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; bool feature; CryptoTwoOpFn *genfn; + gen_helper_gvec_3 *oolfn = NULL; switch (opcode) { case 0: /* SHA512SU0 */ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) break; case 1: /* SM4E */ feature = dc_isar_feature(aa64_sm4, s); - genfn = gen_helper_crypto_sm4e; + oolfn = gen_helper_crypto_sm4e; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) return; } + if (oolfn) { + gen_gvec_op3_ool(s, true, rd, rd, rn, 0, oolfn); + return; + } + tcg_rd_ptr = vec_full_reg_ptr(s, rd); tcg_rn_ptr = vec_full_reg_ptr(s, rn); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (!dc_isar_feature(aa32_aes, s) || ((rm | rd) & 1)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - - /* Bit 6 is the lowest opcode bit; it distinguishes between - * encryption (AESE/AESMC) and decryption (AESD/AESIMC) - */ - tmp3 = tcg_const_i32(extract32(insn, 6, 1)); - + /* + * Bit 6 is the lowest opcode bit; it distinguishes + * between encryption (AESE/AESMC) and decryption + * (AESD/AESIMC). + */ if (op == NEON_2RM_AESE) { - gen_helper_crypto_aese(ptr1, ptr2, tmp3); + tcg_gen_gvec_3_ool(vfp_reg_offset(true, rd), + vfp_reg_offset(true, rd), + vfp_reg_offset(true, rm), + 16, 16, extract32(insn, 6, 1), + gen_helper_crypto_aese); } else { - gen_helper_crypto_aesmc(ptr1, ptr2, tmp3); + tcg_gen_gvec_2_ool(vfp_reg_offset(true, rd), + vfp_reg_offset(true, rm), + 16, 16, extract32(insn, 6, 1), + gen_helper_crypto_aesmc); } - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_i32(tmp3); break; case NEON_2RM_SHA1H: if (!dc_isar_feature(aa32_sha1, s) || ((rm | rd) & 1)) { diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/helper-proto.h" #include "tcg/tcg-gvec-desc.h" #include "fpu/softfloat.h" - +#include "vec_internal.h" /* Note that vector data is stored in host-endian 64-bit chunks, so addressing units smaller than that needs a host-endian fixup. */ @@ -XXX,XX +XXX,XX @@ #define H4(x) (x) #endif -static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) -{ - uint64_t *d = vd + opr_sz; - uintptr_t i; - - for (i = opr_sz; i < max_sz; i += 8) { - *d++ = 0; - } -} - /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ static int16_t inl_qrdmlah_s16(int16_t src1, int16_t src2, int16_t src3, uint32_t *sat) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> With this conversion, we will be able to use the same helpers with sve. This also fixes a bug in which we failed to clear the high bits of the SVE register after an AdvSIMD operation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 2 ++ target/arm/translate-a64.h | 3 ++ target/arm/crypto_helper.c | 11 +++++++ target/arm/translate-a64.c | 59 ++++++++++++++++++++------------------ 4 files changed, 47 insertions(+), 28 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_rax1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ static inline int vec_full_reg_size(DisasContext *s) bool disas_sve(DisasContext *, uint32_t); +void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, + uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz); + #endif /* TARGET_ARM_TRANSLATE_A64_H */ diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm, uint32_t desc) } clear_tail(vd, opr_sz, simd_maxsz(desc)); } + +void HELPER(crypto_rax1)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + uint64_t *d = vd, *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 8; ++i) { + d[i] = n[i] ^ rol64(m[i], 1); + } + clear_tail(vd, opr_sz, simd_maxsz(desc)); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rn_ptr); } +static void gen_rax1_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m) +{ + tcg_gen_rotli_i64(d, m, 1); + tcg_gen_xor_i64(d, d, n); +} + +static void gen_rax1_vec(unsigned vece, TCGv_vec d, TCGv_vec n, TCGv_vec m) +{ + tcg_gen_rotli_vec(vece, d, m, 1); + tcg_gen_xor_vec(vece, d, d, n); +} + +void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, + uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz) +{ + static const TCGOpcode vecop_list[] = { INDEX_op_rotli_vec, 0 }; + static const GVecGen3 op = { + .fni8 = gen_rax1_i64, + .fniv = gen_rax1_vec, + .opt_opc = vecop_list, + .fno = gen_helper_crypto_rax1, + .vece = MO_64, + }; + tcg_gen_gvec_3(rd_ofs, rn_ofs, rm_ofs, opr_sz, max_sz, &op); +} + /* Crypto three-reg SHA512 * 31 21 20 16 15 14 13 12 11 10 9 5 4 0 * +-----------------------+------+---+---+-----+--------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) bool feature; CryptoThreeOpFn *genfn = NULL; gen_helper_gvec_3 *oolfn = NULL; + GVecGen3Fn *gvecfn = NULL; if (o == 0) { switch (opcode) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) break; case 3: /* RAX1 */ feature = dc_isar_feature(aa64_sha3, s); - genfn = NULL; + gvecfn = gen_gvec_rax1; break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) if (oolfn) { gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); - return; - } - - if (genfn) { + } else if (gvecfn) { + gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); + } else { TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; tcg_rd_ptr = vec_full_reg_ptr(s, rd); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rd_ptr); tcg_temp_free_ptr(tcg_rn_ptr); tcg_temp_free_ptr(tcg_rm_ptr); - } else { - TCGv_i64 tcg_op1, tcg_op2, tcg_res[2]; - int pass; - - tcg_op1 = tcg_temp_new_i64(); - tcg_op2 = tcg_temp_new_i64(); - tcg_res[0] = tcg_temp_new_i64(); - tcg_res[1] = tcg_temp_new_i64(); - - for (pass = 0; pass < 2; pass++) { - read_vec_element(s, tcg_op1, rn, pass, MO_64); - read_vec_element(s, tcg_op2, rm, pass, MO_64); - - tcg_gen_rotli_i64(tcg_res[pass], tcg_op2, 1); - tcg_gen_xor_i64(tcg_res[pass], tcg_res[pass], tcg_op1); - } - write_vec_element(s, tcg_res[0], rd, 0, MO_64); - write_vec_element(s, tcg_res[1], rd, 1, MO_64); - - tcg_temp_free_i64(tcg_op1); - tcg_temp_free_i64(tcg_op2); - tcg_temp_free_i64(tcg_res[0]); - tcg_temp_free_i64(tcg_res[1]); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not yet convert the helpers to loop over opr_sz, but the descriptor allows the vector tail to be cleared. Which fixes an existing bug vs SVE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 15 +++++++----- target/arm/crypto_helper.c | 37 +++++++++++++++++++++++----- target/arm/translate-a64.c | 50 ++++++++++++-------------------------- 3 files changed, 55 insertions(+), 47 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_2(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha512su1, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) -DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sm3partw1, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3partw2, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { #define CR_ST_WORD(state, i) (state.words[i]) #endif +/* + * The caller has not been converted to full gvec, and so only + * modifies the low 16 bytes of the vector register. + */ +static void clear_tail_16(void *vd, uint32_t desc) +{ + int opr_sz = simd_oprsz(desc); + int max_sz = simd_maxsz(desc); + + assert(opr_sz == 16); + clear_tail(vd, opr_sz, max_sz); +} + static void do_crypto_aese(uint64_t *rd, uint64_t *rn, uint64_t *rm, bool decrypt) { @@ -XXX,XX +XXX,XX @@ static uint64_t s1_512(uint64_t x) return ror64(x, 19) ^ ror64(x, 61) ^ (x >> 6); } -void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512su0)(void *vd, void *vn) +void HELPER(crypto_sha512su0)(void *vd, void *vn, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512su0)(void *vd, void *vn) rd[0] = d0; rd[1] = d1; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) rd[0] += s1_512(rn[0]) + rm[0]; rd[1] += s1_512(rn[1]) + rm[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool feature; - CryptoThreeOpFn *genfn = NULL; gen_helper_gvec_3 *oolfn = NULL; GVecGen3Fn *gvecfn = NULL; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SHA512H */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512h; + oolfn = gen_helper_crypto_sha512h; break; case 1: /* SHA512H2 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512h2; + oolfn = gen_helper_crypto_sha512h2; break; case 2: /* SHA512SU1 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512su1; + oolfn = gen_helper_crypto_sha512su1; break; case 3: /* RAX1 */ feature = dc_isar_feature(aa64_sha3, s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SM3PARTW1 */ feature = dc_isar_feature(aa64_sm3, s); - genfn = gen_helper_crypto_sm3partw1; + oolfn = gen_helper_crypto_sm3partw1; break; case 1: /* SM3PARTW2 */ feature = dc_isar_feature(aa64_sm3, s); - genfn = gen_helper_crypto_sm3partw2; + oolfn = gen_helper_crypto_sm3partw2; break; case 2: /* SM4EKEY */ feature = dc_isar_feature(aa64_sm4, s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) if (oolfn) { gen_gvec_op3_ool(s, true, rd, rn, rm, 0, oolfn); - } else if (gvecfn) { - gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); } else { - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); + gen_gvec_fn3(s, true, rd, rn, rm, gvecfn, MO_64); } } @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) int opcode = extract32(insn, 10, 2); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; bool feature; - CryptoTwoOpFn *genfn; - gen_helper_gvec_3 *oolfn = NULL; switch (opcode) { case 0: /* SHA512SU0 */ feature = dc_isar_feature(aa64_sha512, s); - genfn = gen_helper_crypto_sha512su0; break; case 1: /* SM4E */ feature = dc_isar_feature(aa64_sm4, s); - oolfn = gen_helper_crypto_sm4e; break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) return; } - if (oolfn) { - gen_gvec_op3_ool(s, true, rd, rd, rn, 0, oolfn); - return; + switch (opcode) { + case 0: /* SHA512SU0 */ + gen_gvec_op2_ool(s, true, rd, rn, 0, gen_helper_crypto_sha512su0); + break; + case 1: /* SM4E */ + gen_gvec_op3_ool(s, true, rd, rd, rn, 0, gen_helper_crypto_sm4e); + break; + default: + g_assert_not_reached(); } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - - genfn(tcg_rd_ptr, tcg_rn_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); } /* Crypto four-register -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not yet convert the helpers to loop over opr_sz, but the descriptor allows the vector tail to be cleared. Which fixes an existing bug vs SVE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 12 ++-- target/arm/neon-dp.decode | 12 ++-- target/arm/crypto_helper.c | 24 +++++-- target/arm/translate-a64.c | 34 ++++----- target/arm/translate-neon.inc.c | 124 +++++--------------------------- target/arm/translate.c | 24 ++----- 6 files changed, 67 insertions(+), 163 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) -DEF_HELPER_FLAGS_2(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_3(crypto_sha256h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) -DEF_HELPER_FLAGS_2(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr) -DEF_HELPER_FLAGS_3(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_4(crypto_sha256h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VPADD_3s 1111 001 0 0 . .. .... .... 1011 . . . 1 .... @3same_q0 VQRDMLAH_3s 1111 001 1 0 . .. .... .... 1011 ... 1 .... @3same +@3same_crypto .... .... .... .... .... .... .... .... \ + &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp size=0 q=1 + SHA1_3s 1111 001 0 0 . optype:2 .... .... 1100 . 1 . 0 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp -SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto VFMA_fp_3s 1111 001 0 0 . 0 . .... .... 1100 ... 1 .... @3same_fp VFMS_fp_3s 1111 001 0 0 . 1 . .... .... 1100 ... 1 .... @3same_fp diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1_3reg)(void *vd, void *vn, void *vm, uint32_t op) rd[1] = d.l[1]; } -void HELPER(crypto_sha1h)(void *vd, void *vm) +void HELPER(crypto_sha1h)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1h)(void *vd, void *vm) rd[0] = m.l[0]; rd[1] = m.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha1su1)(void *vd, void *vm) +void HELPER(crypto_sha1su1)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha1su1)(void *vd, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } /* @@ -XXX,XX +XXX,XX @@ static uint32_t s1(uint32_t x) return ror32(x, 17) ^ ror32(x, 19) ^ (x >> 10); } -void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256h)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256h2)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256su0)(void *vd, void *vm) +void HELPER(crypto_sha256su0)(void *vd, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rm = vm; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256su0)(void *vd, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } -void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm) +void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm, uint32_t desc) { uint64_t *rd = vd; uint64_t *rn = vn; @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(vd, desc); } /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) int rm = extract32(insn, 16, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - CryptoThreeOpFn *genfn; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; + gen_helper_gvec_3 *genfn; bool feature; if (size != 0) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) return; } - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - if (genfn) { - genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr); + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); } else { TCGv_i32 tcg_opcode = tcg_const_i32(opcode); + TCGv_ptr tcg_rd_ptr = vec_full_reg_ptr(s, rd); + TCGv_ptr tcg_rn_ptr = vec_full_reg_ptr(s, rn); + TCGv_ptr tcg_rm_ptr = vec_full_reg_ptr(s, rm); gen_helper_crypto_sha1_3reg(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr, tcg_opcode); - tcg_temp_free_i32(tcg_opcode); - } - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); + tcg_temp_free_i32(tcg_opcode); + tcg_temp_free_ptr(tcg_rd_ptr); + tcg_temp_free_ptr(tcg_rn_ptr); + tcg_temp_free_ptr(tcg_rm_ptr); + } } /* Crypto two-reg SHA @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) int opcode = extract32(insn, 12, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - CryptoTwoOpFn *genfn; + gen_helper_gvec_2 *genfn; bool feature; - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; if (size != 0) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - - genfn(tcg_rd_ptr, tcg_rn_ptr); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); + gen_gvec_op2_ool(s, true, rd, rn, 0, genfn); } static void gen_rax1_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m) diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_3SAME_CMP(VCGE_S, TCG_COND_GE) DO_3SAME_CMP(VCGE_U, TCG_COND_GEU) DO_3SAME_CMP(VCEQ, TCG_COND_EQ) -static void gen_VMUL_p_3s(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, - uint32_t rm_ofs, uint32_t oprsz, uint32_t maxsz) -{ - tcg_gen_gvec_3_ool(rd_ofs, rn_ofs, rm_ofs, oprsz, maxsz, - 0, gen_helper_gvec_pmul_b); -} +#define WRAP_OOL_FN(WRAPNAME, FUNC) \ + static void WRAPNAME(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, \ + uint32_t rm_ofs, uint32_t oprsz, uint32_t maxsz) \ + { \ + tcg_gen_gvec_3_ool(rd_ofs, rn_ofs, rm_ofs, oprsz, maxsz, 0, FUNC); \ + } + +WRAP_OOL_FN(gen_VMUL_p_3s, gen_helper_gvec_pmul_b) static bool trans_VMUL_p_3s(DisasContext *s, arg_3same *a) { @@ -XXX,XX +XXX,XX @@ static bool trans_SHA1_3s(DisasContext *s, arg_SHA1_3s *a) return true; } -static bool trans_SHA256H_3s(DisasContext *s, arg_SHA256H_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; +#define DO_SHA2(NAME, FUNC) \ + WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ + static bool trans_##NAME##_3s(DisasContext *s, arg_3same *a) \ + { \ + if (!dc_isar_feature(aa32_sha2, s)) { \ + return false; \ + } \ + return do_3same(s, a, gen_##NAME##_3s); \ } - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256h(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} - -static bool trans_SHA256H2_3s(DisasContext *s, arg_SHA256H2_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; - } - - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256h2(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} - -static bool trans_SHA256SU1_3s(DisasContext *s, arg_SHA256SU1_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha2, s)) { - return false; - } - - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - gen_helper_crypto_sha256su1(ptr1, ptr2, ptr3); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} +DO_SHA2(SHA256H, gen_helper_crypto_sha256h) +DO_SHA2(SHA256H2, gen_helper_crypto_sha256h2) +DO_SHA2(SHA256SU1, gen_helper_crypto_sha256su1) #define DO_3SAME_64(INSN, FUNC) \ static void gen_##INSN##_3s(unsigned vece, uint32_t rd_ofs, \ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int vec_size; uint32_t imm; TCGv_i32 tmp, tmp2, tmp3, tmp4, tmp5; - TCGv_ptr ptr1, ptr2; + TCGv_ptr ptr1; TCGv_i64 tmp64; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (!dc_isar_feature(aa32_sha1, s) || ((rm | rd) & 1)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - - gen_helper_crypto_sha1h(ptr1, ptr2); - - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); + tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, + gen_helper_crypto_sha1h); break; case NEON_2RM_SHA1SU1: if ((rm | rd) & 1) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } else if (!dc_isar_feature(aa32_sha1, s)) { return 1; } - ptr1 = vfp_reg_ptr(true, rd); - ptr2 = vfp_reg_ptr(true, rm); - if (q) { - gen_helper_crypto_sha256su0(ptr1, ptr2); - } else { - gen_helper_crypto_sha1su1(ptr1, ptr2); - } - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); + tcg_gen_gvec_2_ool(rd_ofs, rm_ofs, 16, 16, 0, + q ? gen_helper_crypto_sha256su0 + : gen_helper_crypto_sha1su1); break; - case NEON_2RM_VMVN: tcg_gen_gvec_not(0, rd_ofs, rm_ofs, vec_size, vec_size); break; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rather than passing an opcode to a helper, fully decode the operation at translate time. Use clear_tail_16 to zap the balance of the SVE register with the AdvSIMD write. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 5 +- target/arm/neon-dp.decode | 6 +- target/arm/crypto_helper.c | 99 +++++++++++++++++++++------------ target/arm/translate-a64.c | 29 ++++------ target/arm/translate-neon.inc.c | 46 ++++----------- 5 files changed, 93 insertions(+), 92 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(neon_qzip32, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_4(crypto_aese, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_aesmc, TCG_CALL_NO_RWG, void, ptr, ptr, i32) -DEF_HELPER_FLAGS_4(crypto_sha1_3reg, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1su0, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1c, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1p, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sha1m, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_sha1h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_3(crypto_sha1su1, TCG_CALL_NO_RWG, void, ptr, ptr, i32) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VQRDMLAH_3s 1111 001 1 0 . .. .... .... 1011 ... 1 .... @3same @3same_crypto .... .... .... .... .... .... .... .... \ &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp size=0 q=1 -SHA1_3s 1111 001 0 0 . optype:2 .... .... 1100 . 1 . 0 .... \ - vm=%vm_dp vn=%vn_dp vd=%vd_dp +SHA1C_3s 1111 001 0 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1P_3s 1111 001 0 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1M_3s 1111 001 0 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto +SHA1SU0_3s 1111 001 0 0 . 11 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256H_3s 1111 001 1 0 . 00 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256H2_3s 1111 001 1 0 . 01 .... .... 1100 . 1 . 0 .... @3same_crypto SHA256SU1_3s 1111 001 1 0 . 10 .... .... 1100 . 1 . 0 .... @3same_crypto diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ union CRYPTO_STATE { }; #ifdef HOST_WORDS_BIGENDIAN -#define CR_ST_BYTE(state, i) (state.bytes[(15 - (i)) ^ 8]) -#define CR_ST_WORD(state, i) (state.words[(3 - (i)) ^ 2]) +#define CR_ST_BYTE(state, i) ((state).bytes[(15 - (i)) ^ 8]) +#define CR_ST_WORD(state, i) ((state).words[(3 - (i)) ^ 2]) #else -#define CR_ST_BYTE(state, i) (state.bytes[i]) -#define CR_ST_WORD(state, i) (state.words[i]) +#define CR_ST_BYTE(state, i) ((state).bytes[i]) +#define CR_ST_WORD(state, i) ((state).words[i]) #endif /* @@ -XXX,XX +XXX,XX @@ static uint32_t maj(uint32_t x, uint32_t y, uint32_t z) return (x & y) | ((x | y) & z); } -void HELPER(crypto_sha1_3reg)(void *vd, void *vn, void *vm, uint32_t op) +void HELPER(crypto_sha1su0)(void *vd, void *vn, void *vm, uint32_t desc) +{ + uint64_t *d = vd, *n = vn, *m = vm; + uint64_t d0, d1; + + d0 = d[1] ^ d[0] ^ m[0]; + d1 = n[0] ^ d[1] ^ m[1]; + d[0] = d0; + d[1] = d1; + + clear_tail_16(vd, desc); +} + +static inline void crypto_sha1_3reg(uint64_t *rd, uint64_t *rn, + uint64_t *rm, uint32_t desc, + uint32_t (*fn)(union CRYPTO_STATE *d)) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + int i; - if (op == 3) { /* sha1su0 */ - d.l[0] ^= d.l[1] ^ m.l[0]; - d.l[1] ^= n.l[0] ^ m.l[1]; - } else { - int i; + for (i = 0; i < 4; i++) { + uint32_t t = fn(&d); - for (i = 0; i < 4; i++) { - uint32_t t; + t += rol32(CR_ST_WORD(d, 0), 5) + CR_ST_WORD(n, 0) + + CR_ST_WORD(m, i); - switch (op) { - case 0: /* sha1c */ - t = cho(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - case 1: /* sha1p */ - t = par(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - case 2: /* sha1m */ - t = maj(CR_ST_WORD(d, 1), CR_ST_WORD(d, 2), CR_ST_WORD(d, 3)); - break; - default: - g_assert_not_reached(); - } - t += rol32(CR_ST_WORD(d, 0), 5) + CR_ST_WORD(n, 0) - + CR_ST_WORD(m, i); - - CR_ST_WORD(n, 0) = CR_ST_WORD(d, 3); - CR_ST_WORD(d, 3) = CR_ST_WORD(d, 2); - CR_ST_WORD(d, 2) = ror32(CR_ST_WORD(d, 1), 2); - CR_ST_WORD(d, 1) = CR_ST_WORD(d, 0); - CR_ST_WORD(d, 0) = t; - } + CR_ST_WORD(n, 0) = CR_ST_WORD(d, 3); + CR_ST_WORD(d, 3) = CR_ST_WORD(d, 2); + CR_ST_WORD(d, 2) = ror32(CR_ST_WORD(d, 1), 2); + CR_ST_WORD(d, 1) = CR_ST_WORD(d, 0); + CR_ST_WORD(d, 0) = t; } rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(rd, desc); +} + +static uint32_t do_sha1c(union CRYPTO_STATE *d) +{ + return cho(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1c)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1c); +} + +static uint32_t do_sha1p(union CRYPTO_STATE *d) +{ + return par(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1p)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1p); +} + +static uint32_t do_sha1m(union CRYPTO_STATE *d) +{ + return maj(CR_ST_WORD(*d, 1), CR_ST_WORD(*d, 2), CR_ST_WORD(*d, 3)); +} + +void HELPER(crypto_sha1m)(void *vd, void *vn, void *vm, uint32_t desc) +{ + crypto_sha1_3reg(vd, vn, vm, desc, do_sha1m); } void HELPER(crypto_sha1h)(void *vd, void *vm, uint32_t desc) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) switch (opcode) { case 0: /* SHA1C */ + genfn = gen_helper_crypto_sha1c; + feature = dc_isar_feature(aa64_sha1, s); + break; case 1: /* SHA1P */ + genfn = gen_helper_crypto_sha1p; + feature = dc_isar_feature(aa64_sha1, s); + break; case 2: /* SHA1M */ + genfn = gen_helper_crypto_sha1m; + feature = dc_isar_feature(aa64_sha1, s); + break; case 3: /* SHA1SU0 */ - genfn = NULL; + genfn = gen_helper_crypto_sha1su0; feature = dc_isar_feature(aa64_sha1, s); break; case 4: /* SHA256H */ @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) if (!fp_access_check(s)) { return; } - - if (genfn) { - gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); - } else { - TCGv_i32 tcg_opcode = tcg_const_i32(opcode); - TCGv_ptr tcg_rd_ptr = vec_full_reg_ptr(s, rd); - TCGv_ptr tcg_rn_ptr = vec_full_reg_ptr(s, rn); - TCGv_ptr tcg_rm_ptr = vec_full_reg_ptr(s, rm); - - gen_helper_crypto_sha1_3reg(tcg_rd_ptr, tcg_rn_ptr, - tcg_rm_ptr, tcg_opcode); - - tcg_temp_free_i32(tcg_opcode); - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); - } + gen_gvec_op3_ool(s, true, rd, rn, rm, 0, genfn); } /* Crypto two-reg SHA diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VMUL_p_3s(DisasContext *s, arg_3same *a) DO_VQRDMLAH(VQRDMLAH, gen_gvec_sqrdmlah_qc) DO_VQRDMLAH(VQRDMLSH, gen_gvec_sqrdmlsh_qc) -static bool trans_SHA1_3s(DisasContext *s, arg_SHA1_3s *a) -{ - TCGv_ptr ptr1, ptr2, ptr3; - TCGv_i32 tmp; - - if (!arm_dc_feature(s, ARM_FEATURE_NEON) || - !dc_isar_feature(aa32_sha1, s)) { - return false; +#define DO_SHA1(NAME, FUNC) \ + WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ + static bool trans_##NAME##_3s(DisasContext *s, arg_3same *a) \ + { \ + if (!dc_isar_feature(aa32_sha1, s)) { \ + return false; \ + } \ + return do_3same(s, a, gen_##NAME##_3s); \ } - /* UNDEF accesses to D16-D31 if they don't exist. */ - if (!dc_isar_feature(aa32_simd_r32, s) && - ((a->vd | a->vn | a->vm) & 0x10)) { - return false; - } - - if ((a->vn | a->vm | a->vd) & 1) { - return false; - } - - if (!vfp_access_check(s)) { - return true; - } - - ptr1 = vfp_reg_ptr(true, a->vd); - ptr2 = vfp_reg_ptr(true, a->vn); - ptr3 = vfp_reg_ptr(true, a->vm); - tmp = tcg_const_i32(a->optype); - gen_helper_crypto_sha1_3reg(ptr1, ptr2, ptr3, tmp); - tcg_temp_free_i32(tmp); - tcg_temp_free_ptr(ptr1); - tcg_temp_free_ptr(ptr2); - tcg_temp_free_ptr(ptr3); - - return true; -} +DO_SHA1(SHA1C, gen_helper_crypto_sha1c) +DO_SHA1(SHA1P, gen_helper_crypto_sha1p) +DO_SHA1(SHA1M, gen_helper_crypto_sha1m) +DO_SHA1(SHA1SU0, gen_helper_crypto_sha1su0) #define DO_SHA2(NAME, FUNC) \ WRAP_OOL_FN(gen_##NAME##_3s, FUNC) \ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rather than passing an opcode to a helper, fully decode the operation at translate time. Use clear_tail_16 to zap the balance of the SVE register with the AdvSIMD write. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200514212831.31248-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 5 ++++- target/arm/crypto_helper.c | 24 ++++++++++++++++++------ target/arm/translate-a64.c | 21 +++++---------------- 3 files changed, 27 insertions(+), 23 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) -DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt1a, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt1b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt2a, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(crypto_sm3tt2b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(crypto_sm3partw2, TCG_CALL_NO_RWG, diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm, uint32_t desc) clear_tail_16(vd, desc); } -void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, - uint32_t opcode) +static inline void QEMU_ALWAYS_INLINE +crypto_sm3tt(uint64_t *rd, uint64_t *rn, uint64_t *rm, + uint32_t desc, uint32_t opcode) { - uint64_t *rd = vd; - uint64_t *rn = vn; - uint64_t *rm = vm; union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t imm2 = simd_data(desc); uint32_t t; assert(imm2 < 4); @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, /* SM3TT2B */ t = cho(CR_ST_WORD(d, 3), CR_ST_WORD(d, 2), CR_ST_WORD(d, 1)); } else { - g_assert_not_reached(); + qemu_build_not_reached(); } t += CR_ST_WORD(d, 0) + CR_ST_WORD(m, imm2); @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, rd[0] = d.l[0]; rd[1] = d.l[1]; + + clear_tail_16(rd, desc); } +#define DO_SM3TT(NAME, OPCODE) \ + void HELPER(NAME)(void *vd, void *vn, void *vm, uint32_t desc) \ + { crypto_sm3tt(vd, vn, vm, desc, OPCODE); } + +DO_SM3TT(crypto_sm3tt1a, 0) +DO_SM3TT(crypto_sm3tt1b, 1) +DO_SM3TT(crypto_sm3tt2a, 2) +DO_SM3TT(crypto_sm3tt2b, 3) + +#undef DO_SM3TT + static uint8_t const sm4_sbox[] = { 0xd6, 0x90, 0xe9, 0xfe, 0xcc, 0xe1, 0x3d, 0xb7, 0x16, 0xb6, 0x14, 0xc2, 0x28, 0xfb, 0x2c, 0x05, diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_xar(DisasContext *s, uint32_t insn) */ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) { + static gen_helper_gvec_3 * const fns[4] = { + gen_helper_crypto_sm3tt1a, gen_helper_crypto_sm3tt1b, + gen_helper_crypto_sm3tt2a, gen_helper_crypto_sm3tt2b, + }; int opcode = extract32(insn, 10, 2); int imm2 = extract32(insn, 12, 2); int rm = extract32(insn, 16, 5); int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); - TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; - TCGv_i32 tcg_imm2, tcg_opcode; if (!dc_isar_feature(aa64_sm3, s)) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) return; } - tcg_rd_ptr = vec_full_reg_ptr(s, rd); - tcg_rn_ptr = vec_full_reg_ptr(s, rn); - tcg_rm_ptr = vec_full_reg_ptr(s, rm); - tcg_imm2 = tcg_const_i32(imm2); - tcg_opcode = tcg_const_i32(opcode); - - gen_helper_crypto_sm3tt(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr, tcg_imm2, - tcg_opcode); - - tcg_temp_free_ptr(tcg_rd_ptr); - tcg_temp_free_ptr(tcg_rn_ptr); - tcg_temp_free_ptr(tcg_rm_ptr); - tcg_temp_free_i32(tcg_imm2); - tcg_temp_free_i32(tcg_opcode); + gen_gvec_op3_ool(s, true, rd, rn, rm, imm2, fns[opcode]); } /* C3.6 Data processing - SIMD, inc Crypto -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The ADC region size is 256B, split as: - [0x00 - 0x4f] defined - [0x50 - 0xff] reserved All registers are 32-bit (thus when the datasheet mentions the last defined register is 0x4c, it means its address range is 0x4c .. 0x4f. This model implementation is also 32-bit. Set MemoryRegionOps 'impl' fields. See: 'RM0033 Reference manual Rev 8', Table 10.13.18 "ADC register map". Reported-by: Seth Kintigh <skintigh@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200603055915.17678-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/adc/stm32f2xx_adc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/adc/stm32f2xx_adc.c b/hw/adc/stm32f2xx_adc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/adc/stm32f2xx_adc.c +++ b/hw/adc/stm32f2xx_adc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps stm32f2xx_adc_ops = { .read = stm32f2xx_adc_read, .write = stm32f2xx_adc_write, .endianness = DEVICE_NATIVE_ENDIAN, + .impl.min_access_size = 4, + .impl.max_access_size = 4, }; static const VMStateDescription vmstate_stm32f2xx_adc = { @@ -XXX,XX +XXX,XX @@ static void stm32f2xx_adc_init(Object *obj) sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); memory_region_init_io(&s->mmio, obj, &stm32f2xx_adc_ops, s, - TYPE_STM32F2XX_ADC, 0xFF); + TYPE_STM32F2XX_ADC, 0x100); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); } -- 2.20.1 From: Thomas Huth <thuth@redhat.com> As described by Edgar here: https://www.mail-archive.com/qemu-devel@nongnu.org/msg605124.html we can use the Ubuntu kernel for testing the xlnx-versal-virt machine. So let's add a boot test for this now. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200525141237.15243-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(LinuxKernelTest): console_pattern = 'Kernel command line: %s' % kernel_command_line self.wait_for_console_pattern(console_pattern) + def test_aarch64_xlnx_versal_virt(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:xlnx-versal-virt + :avocado: tags=device:pl011 + :avocado: tags=device:arm_gicv3 + """ + kernel_url = ('http://ports.ubuntu.com/ubuntu-ports/dists/' + 'bionic-updates/main/installer-arm64/current/images/' + 'netboot/ubuntu-installer/arm64/linux') + kernel_hash = '5bfc54cf7ed8157d93f6e5b0241e727b6dc22c50' + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) + + initrd_url = ('http://ports.ubuntu.com/ubuntu-ports/dists/' + 'bionic-updates/main/installer-arm64/current/images/' + 'netboot/ubuntu-installer/arm64/initrd.gz') + initrd_hash = 'd385d3e88d53e2004c5d43cbe668b458a094f772' + initrd_path = self.fetch_asset(initrd_url, asset_hash=initrd_hash) + + self.vm.set_console() + self.vm.add_args('-m', '2G', + '-kernel', kernel_path, + '-initrd', initrd_path) + self.vm.launch() + self.wait_for_console_pattern('Checked W+X mappings: passed') + def test_arm_virt(self): """ :avocado: tags=arch:arm -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200602135050.593692-1-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 85 ++++++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + 2 files changed, 86 insertions(+) create mode 100644 docs/system/arm/aspeed.rst diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ +Aspeed family boards (``*-bmc``, ``ast2500-evb``, ``ast2600-evb``) +================================================================== + +The QEMU Aspeed machines model BMCs of various OpenPOWER systems and +Aspeed evaluation boards. They are based on different releases of the +Aspeed SoC : the AST2400 integrating an ARM926EJ-S CPU (400MHz), the +AST2500 with an ARM1176JZS CPU (800MHz) and more recently the AST2600 +with dual cores ARM Cortex A7 CPUs (1.2GHz). + +The SoC comes with RAM, Gigabit ethernet, USB, SD/MMC, USB, SPI, I2C, +etc. + +AST2400 SoC based machines : + +- ``palmetto-bmc`` OpenPOWER Palmetto POWER8 BMC + +AST2500 SoC based machines : + +- ``ast2500-evb`` Aspeed AST2500 Evaluation board +- ``romulus-bmc`` OpenPOWER Romulus POWER9 BMC +- ``witherspoon-bmc`` OpenPOWER Witherspoon POWER9 BMC +- ``sonorapass-bmc`` OCP SonoraPass BMC +- ``swift-bmc`` OpenPOWER Swift BMC POWER9 + +AST2600 SoC based machines : + +- ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex A7) +- ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC + +Supported devices +----------------- + + * SMP (for the AST2600 Cortex-A7) + * Interrupt Controller (VIC) + * Timer Controller + * RTC Controller + * I2C Controller + * System Control Unit (SCU) + * SRAM mapping + * X-DMA Controller (basic interface) + * Static Memory Controller (SMC or FMC) - Only SPI Flash support + * SPI Memory Controller + * USB 2.0 Controller + * SD/MMC storage controllers + * SDRAM controller (dummy interface for basic settings and training) + * Watchdog Controller + * GPIO Controller (Master only) + * UART + * Ethernet controllers + + +Missing devices +--------------- + + * Coprocessor support + * ADC (out of tree implementation) + * PWM and Fan Controller + * LPC Bus Controller + * Slave GPIO Controller + * Super I/O Controller + * Hash/Crypto Engine + * PCI-Express 1 Controller + * Graphic Display Controller + * PECI Controller + * MCTP Controller + * Mailbox Controller + * Virtual UART + * eSPI Controller + * I3C Controller + +Boot options +------------ + +The Aspeed machines can be started using the -kernel option to load a +Linux kernel or from a firmare image which can be downloaded from the +OpenPOWER jenkins : + + https://openpower.xyz/ + +The image should be attached as an MTD drive. Run : + +.. code-block:: bash + + $ qemu-system-arm -M romulus-bmc -nic user \ + -drive file=flash-romulus,format=raw,if=mtd -nographic diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/realview arm/versatile arm/vexpress + arm/aspeed arm/musicpal arm/nseries arm/orangepi -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add BCM2835 SOC MPHI (Message-based Parallel Host Interface) emulation. It is very basic, only providing the FIQ interrupt needed to allow the dwc-otg USB host controller driver in the Raspbian kernel to function. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200520235349.21215-2-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 2 + include/hw/misc/bcm2835_mphi.h | 44 ++++++ hw/arm/bcm2835_peripherals.c | 17 +++ hw/misc/bcm2835_mphi.c | 191 +++++++++++++++++++++++++++ hw/misc/Makefile.objs | 1 + 5 files changed, 255 insertions(+) create mode 100644 include/hw/misc/bcm2835_mphi.h create mode 100644 hw/misc/bcm2835_mphi.c diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_property.h" #include "hw/misc/bcm2835_rng.h" #include "hw/misc/bcm2835_mbox.h" +#include "hw/misc/bcm2835_mphi.h" #include "hw/misc/bcm2835_thermal.h" #include "hw/sd/sdhci.h" #include "hw/sd/bcm2835_sdhost.h" @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { qemu_irq irq, fiq; BCM2835SystemTimerState systmr; + BCM2835MphiState mphi; UnimplementedDeviceState armtmr; UnimplementedDeviceState cprman; UnimplementedDeviceState a2w; diff --git a/include/hw/misc/bcm2835_mphi.h b/include/hw/misc/bcm2835_mphi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/bcm2835_mphi.h @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 SOC MPHI state definitions + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef HW_MISC_BCM2835_MPHI_H +#define HW_MISC_BCM2835_MPHI_H + +#include "hw/irq.h" +#include "hw/sysbus.h" + +#define MPHI_MMIO_SIZE 0x1000 + +typedef struct BCM2835MphiState BCM2835MphiState; + +struct BCM2835MphiState { + SysBusDevice parent_obj; + qemu_irq irq; + MemoryRegion iomem; + + uint32_t outdda; + uint32_t outddb; + uint32_t ctrl; + uint32_t intstat; + uint32_t swirq; +}; + +#define TYPE_BCM2835_MPHI "bcm2835-mphi" + +#define BCM2835_MPHI(obj) \ + OBJECT_CHECK(BCM2835MphiState, (obj), TYPE_BCM2835_MPHI) + +#endif diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) OBJECT(&s->sdhci.sdbus)); object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost", OBJECT(&s->sdhost.sdbus)); + + /* Mphi */ + sysbus_init_child_obj(obj, "mphi", &s->mphi, sizeof(s->mphi), + TYPE_BCM2835_MPHI); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus"); + /* Mphi */ + object_property_set_bool(OBJECT(&s->mphi), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, MPHI_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->mphi), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->mphi), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_HOSTPORT)); + create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); diff --git a/hw/misc/bcm2835_mphi.c b/hw/misc/bcm2835_mphi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/bcm2835_mphi.c @@ -XXX,XX +XXX,XX @@ +/* + * BCM2835 SOC MPHI emulation + * + * Very basic emulation, only providing the FIQ interrupt needed to + * allow the dwc-otg USB host controller driver in the Raspbian kernel + * to function. + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/misc/bcm2835_mphi.h" +#include "migration/vmstate.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" + +static inline void mphi_raise_irq(BCM2835MphiState *s) +{ + qemu_set_irq(s->irq, 1); +} + +static inline void mphi_lower_irq(BCM2835MphiState *s) +{ + qemu_set_irq(s->irq, 0); +} + +static uint64_t mphi_reg_read(void *ptr, hwaddr addr, unsigned size) +{ + BCM2835MphiState *s = ptr; + uint32_t val = 0; + + switch (addr) { + case 0x28: /* outdda */ + val = s->outdda; + break; + case 0x2c: /* outddb */ + val = s->outddb; + break; + case 0x4c: /* ctrl */ + val = s->ctrl; + val |= 1 << 17; + break; + case 0x50: /* intstat */ + val = s->intstat; + break; + case 0x1f0: /* swirq_set */ + val = s->swirq; + break; + case 0x1f4: /* swirq_clr */ + val = s->swirq; + break; + default: + qemu_log_mask(LOG_UNIMP, "read from unknown register"); + break; + } + + return val; +} + +static void mphi_reg_write(void *ptr, hwaddr addr, uint64_t val, unsigned size) +{ + BCM2835MphiState *s = ptr; + int do_irq = 0; + + switch (addr) { + case 0x28: /* outdda */ + s->outdda = val; + break; + case 0x2c: /* outddb */ + s->outddb = val; + if (val & (1 << 29)) { + do_irq = 1; + } + break; + case 0x4c: /* ctrl */ + s->ctrl = val; + if (val & (1 << 16)) { + do_irq = -1; + } + break; + case 0x50: /* intstat */ + s->intstat = val; + if (val & ((1 << 16) | (1 << 29))) { + do_irq = -1; + } + break; + case 0x1f0: /* swirq_set */ + s->swirq |= val; + do_irq = 1; + break; + case 0x1f4: /* swirq_clr */ + s->swirq &= ~val; + do_irq = -1; + break; + default: + qemu_log_mask(LOG_UNIMP, "write to unknown register"); + return; + } + + if (do_irq > 0) { + mphi_raise_irq(s); + } else if (do_irq < 0) { + mphi_lower_irq(s); + } +} + +static const MemoryRegionOps mphi_mmio_ops = { + .read = mphi_reg_read, + .write = mphi_reg_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void mphi_reset(DeviceState *dev) +{ + BCM2835MphiState *s = BCM2835_MPHI(dev); + + s->outdda = 0; + s->outddb = 0; + s->ctrl = 0; + s->intstat = 0; + s->swirq = 0; +} + +static void mphi_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + BCM2835MphiState *s = BCM2835_MPHI(dev); + + sysbus_init_irq(sbd, &s->irq); +} + +static void mphi_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + BCM2835MphiState *s = BCM2835_MPHI(obj); + + memory_region_init_io(&s->iomem, obj, &mphi_mmio_ops, s, "mphi", MPHI_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +const VMStateDescription vmstate_mphi_state = { + .name = "mphi", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(outdda, BCM2835MphiState), + VMSTATE_UINT32(outddb, BCM2835MphiState), + VMSTATE_UINT32(ctrl, BCM2835MphiState), + VMSTATE_UINT32(intstat, BCM2835MphiState), + VMSTATE_UINT32(swirq, BCM2835MphiState), + VMSTATE_END_OF_LIST() + } +}; + +static void mphi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = mphi_realize; + dc->reset = mphi_reset; + dc->vmsd = &vmstate_mphi_state; +} + +static const TypeInfo bcm2835_mphi_type_info = { + .name = TYPE_BCM2835_MPHI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835MphiState), + .instance_init = mphi_init, + .class_init = mphi_class_init, +}; + +static void bcm2835_mphi_register_types(void) +{ + type_register_static(&bcm2835_mphi_type_info); +} + +type_init(bcm2835_mphi_register_types) diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_OMAP) += omap_l4.o common-obj-$(CONFIG_OMAP) += omap_sdrc.o common-obj-$(CONFIG_OMAP) += omap_tap.o common-obj-$(CONFIG_RASPI) += bcm2835_mbox.o +common-obj-$(CONFIG_RASPI) += bcm2835_mphi.o common-obj-$(CONFIG_RASPI) += bcm2835_property.o common-obj-$(CONFIG_RASPI) += bcm2835_rng.o common-obj-$(CONFIG_RASPI) += bcm2835_thermal.o -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Import the dwc-hsotg (dwc2) register definitions file from the Linux kernel. This is a copy of drivers/usb/dwc2/hw.h from the mainline Linux kernel, the only changes being to the header, and two instances of 'u32' changed to 'uint32_t' to allow it to compile. Checkpatch throws a boatload of errors due to the tab indentation, but I would rather import it as-is than reformat it. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-3-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/usb/dwc2-regs.h | 899 +++++++++++++++++++++++++++++++++++++ 1 file changed, 899 insertions(+) create mode 100644 include/hw/usb/dwc2-regs.h diff --git a/include/hw/usb/dwc2-regs.h b/include/hw/usb/dwc2-regs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/usb/dwc2-regs.h @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Imported from the Linux kernel file drivers/usb/dwc2/hw.h, commit + * a89bae709b3492b478480a2c9734e7e9393b279c ("usb: dwc2: Move + * UTMI_PHY_DATA defines closer") + * + * hw.h - DesignWare HS OTG Controller hardware definitions + * + * Copyright 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DWC2_HW_H__ +#define __DWC2_HW_H__ + +#define HSOTG_REG(x) (x) + +#define GOTGCTL HSOTG_REG(0x000) +#define GOTGCTL_CHIRPEN BIT(27) +#define GOTGCTL_MULT_VALID_BC_MASK (0x1f << 22) +#define GOTGCTL_MULT_VALID_BC_SHIFT 22 +#define GOTGCTL_OTGVER BIT(20) +#define GOTGCTL_BSESVLD BIT(19) +#define GOTGCTL_ASESVLD BIT(18) +#define GOTGCTL_DBNC_SHORT BIT(17) +#define GOTGCTL_CONID_B BIT(16) +#define GOTGCTL_DBNCE_FLTR_BYPASS BIT(15) +#define GOTGCTL_DEVHNPEN BIT(11) +#define GOTGCTL_HSTSETHNPEN BIT(10) +#define GOTGCTL_HNPREQ BIT(9) +#define GOTGCTL_HSTNEGSCS BIT(8) +#define GOTGCTL_SESREQ BIT(1) +#define GOTGCTL_SESREQSCS BIT(0) + +#define GOTGINT HSOTG_REG(0x004) +#define GOTGINT_DBNCE_DONE BIT(19) +#define GOTGINT_A_DEV_TOUT_CHG BIT(18) +#define GOTGINT_HST_NEG_DET BIT(17) +#define GOTGINT_HST_NEG_SUC_STS_CHNG BIT(9) +#define GOTGINT_SES_REQ_SUC_STS_CHNG BIT(8) +#define GOTGINT_SES_END_DET BIT(2) + +#define GAHBCFG HSOTG_REG(0x008) +#define GAHBCFG_AHB_SINGLE BIT(23) +#define GAHBCFG_NOTI_ALL_DMA_WRIT BIT(22) +#define GAHBCFG_REM_MEM_SUPP BIT(21) +#define GAHBCFG_P_TXF_EMP_LVL BIT(8) +#define GAHBCFG_NP_TXF_EMP_LVL BIT(7) +#define GAHBCFG_DMA_EN BIT(5) +#define GAHBCFG_HBSTLEN_MASK (0xf << 1) +#define GAHBCFG_HBSTLEN_SHIFT 1 +#define GAHBCFG_HBSTLEN_SINGLE 0 +#define GAHBCFG_HBSTLEN_INCR 1 +#define GAHBCFG_HBSTLEN_INCR4 3 +#define GAHBCFG_HBSTLEN_INCR8 5 +#define GAHBCFG_HBSTLEN_INCR16 7 +#define GAHBCFG_GLBL_INTR_EN BIT(0) +#define GAHBCFG_CTRL_MASK (GAHBCFG_P_TXF_EMP_LVL | \ + GAHBCFG_NP_TXF_EMP_LVL | \ + GAHBCFG_DMA_EN | \ + GAHBCFG_GLBL_INTR_EN) + +#define GUSBCFG HSOTG_REG(0x00C) +#define GUSBCFG_FORCEDEVMODE BIT(30) +#define GUSBCFG_FORCEHOSTMODE BIT(29) +#define GUSBCFG_TXENDDELAY BIT(28) +#define GUSBCFG_ICTRAFFICPULLREMOVE BIT(27) +#define GUSBCFG_ICUSBCAP BIT(26) +#define GUSBCFG_ULPI_INT_PROT_DIS BIT(25) +#define GUSBCFG_INDICATORPASSTHROUGH BIT(24) +#define GUSBCFG_INDICATORCOMPLEMENT BIT(23) +#define GUSBCFG_TERMSELDLPULSE BIT(22) +#define GUSBCFG_ULPI_INT_VBUS_IND BIT(21) +#define GUSBCFG_ULPI_EXT_VBUS_DRV BIT(20) +#define GUSBCFG_ULPI_CLK_SUSP_M BIT(19) +#define GUSBCFG_ULPI_AUTO_RES BIT(18) +#define GUSBCFG_ULPI_FS_LS BIT(17) +#define GUSBCFG_OTG_UTMI_FS_SEL BIT(16) +#define GUSBCFG_PHY_LP_CLK_SEL BIT(15) +#define GUSBCFG_USBTRDTIM_MASK (0xf << 10) +#define GUSBCFG_USBTRDTIM_SHIFT 10 +#define GUSBCFG_HNPCAP BIT(9) +#define GUSBCFG_SRPCAP BIT(8) +#define GUSBCFG_DDRSEL BIT(7) +#define GUSBCFG_PHYSEL BIT(6) +#define GUSBCFG_FSINTF BIT(5) +#define GUSBCFG_ULPI_UTMI_SEL BIT(4) +#define GUSBCFG_PHYIF16 BIT(3) +#define GUSBCFG_PHYIF8 (0 << 3) +#define GUSBCFG_TOUTCAL_MASK (0x7 << 0) +#define GUSBCFG_TOUTCAL_SHIFT 0 +#define GUSBCFG_TOUTCAL_LIMIT 0x7 +#define GUSBCFG_TOUTCAL(_x) ((_x) << 0) + +#define GRSTCTL HSOTG_REG(0x010) +#define GRSTCTL_AHBIDLE BIT(31) +#define GRSTCTL_DMAREQ BIT(30) +#define GRSTCTL_TXFNUM_MASK (0x1f << 6) +#define GRSTCTL_TXFNUM_SHIFT 6 +#define GRSTCTL_TXFNUM_LIMIT 0x1f +#define GRSTCTL_TXFNUM(_x) ((_x) << 6) +#define GRSTCTL_TXFFLSH BIT(5) +#define GRSTCTL_RXFFLSH BIT(4) +#define GRSTCTL_IN_TKNQ_FLSH BIT(3) +#define GRSTCTL_FRMCNTRRST BIT(2) +#define GRSTCTL_HSFTRST BIT(1) +#define GRSTCTL_CSFTRST BIT(0) + +#define GINTSTS HSOTG_REG(0x014) +#define GINTMSK HSOTG_REG(0x018) +#define GINTSTS_WKUPINT BIT(31) +#define GINTSTS_SESSREQINT BIT(30) +#define GINTSTS_DISCONNINT BIT(29) +#define GINTSTS_CONIDSTSCHNG BIT(28) +#define GINTSTS_LPMTRANRCVD BIT(27) +#define GINTSTS_PTXFEMP BIT(26) +#define GINTSTS_HCHINT BIT(25) +#define GINTSTS_PRTINT BIT(24) +#define GINTSTS_RESETDET BIT(23) +#define GINTSTS_FET_SUSP BIT(22) +#define GINTSTS_INCOMPL_IP BIT(21) +#define GINTSTS_INCOMPL_SOOUT BIT(21) +#define GINTSTS_INCOMPL_SOIN BIT(20) +#define GINTSTS_OEPINT BIT(19) +#define GINTSTS_IEPINT BIT(18) +#define GINTSTS_EPMIS BIT(17) +#define GINTSTS_RESTOREDONE BIT(16) +#define GINTSTS_EOPF BIT(15) +#define GINTSTS_ISOUTDROP BIT(14) +#define GINTSTS_ENUMDONE BIT(13) +#define GINTSTS_USBRST BIT(12) +#define GINTSTS_USBSUSP BIT(11) +#define GINTSTS_ERLYSUSP BIT(10) +#define GINTSTS_I2CINT BIT(9) +#define GINTSTS_ULPI_CK_INT BIT(8) +#define GINTSTS_GOUTNAKEFF BIT(7) +#define GINTSTS_GINNAKEFF BIT(6) +#define GINTSTS_NPTXFEMP BIT(5) +#define GINTSTS_RXFLVL BIT(4) +#define GINTSTS_SOF BIT(3) +#define GINTSTS_OTGINT BIT(2) +#define GINTSTS_MODEMIS BIT(1) +#define GINTSTS_CURMODE_HOST BIT(0) + +#define GRXSTSR HSOTG_REG(0x01C) +#define GRXSTSP HSOTG_REG(0x020) +#define GRXSTS_FN_MASK (0x7f << 25) +#define GRXSTS_FN_SHIFT 25 +#define GRXSTS_PKTSTS_MASK (0xf << 17) +#define GRXSTS_PKTSTS_SHIFT 17 +#define GRXSTS_PKTSTS_GLOBALOUTNAK 1 +#define GRXSTS_PKTSTS_OUTRX 2 +#define GRXSTS_PKTSTS_HCHIN 2 +#define GRXSTS_PKTSTS_OUTDONE 3 +#define GRXSTS_PKTSTS_HCHIN_XFER_COMP 3 +#define GRXSTS_PKTSTS_SETUPDONE 4 +#define GRXSTS_PKTSTS_DATATOGGLEERR 5 +#define GRXSTS_PKTSTS_SETUPRX 6 +#define GRXSTS_PKTSTS_HCHHALTED 7 +#define GRXSTS_HCHNUM_MASK (0xf << 0) +#define GRXSTS_HCHNUM_SHIFT 0 +#define GRXSTS_DPID_MASK (0x3 << 15) +#define GRXSTS_DPID_SHIFT 15 +#define GRXSTS_BYTECNT_MASK (0x7ff << 4) +#define GRXSTS_BYTECNT_SHIFT 4 +#define GRXSTS_EPNUM_MASK (0xf << 0) +#define GRXSTS_EPNUM_SHIFT 0 + +#define GRXFSIZ HSOTG_REG(0x024) +#define GRXFSIZ_DEPTH_MASK (0xffff << 0) +#define GRXFSIZ_DEPTH_SHIFT 0 + +#define GNPTXFSIZ HSOTG_REG(0x028) +/* Use FIFOSIZE_* constants to access this register */ + +#define GNPTXSTS HSOTG_REG(0x02C) +#define GNPTXSTS_NP_TXQ_TOP_MASK (0x7f << 24) +#define GNPTXSTS_NP_TXQ_TOP_SHIFT 24 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK (0xff << 16) +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT 16 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v) (((_v) >> 16) & 0xff) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK (0xffff << 0) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT 0 +#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v) (((_v) >> 0) & 0xffff) + +#define GI2CCTL HSOTG_REG(0x0030) +#define GI2CCTL_BSYDNE BIT(31) +#define GI2CCTL_RW BIT(30) +#define GI2CCTL_I2CDATSE0 BIT(28) +#define GI2CCTL_I2CDEVADDR_MASK (0x3 << 26) +#define GI2CCTL_I2CDEVADDR_SHIFT 26 +#define GI2CCTL_I2CSUSPCTL BIT(25) +#define GI2CCTL_ACK BIT(24) +#define GI2CCTL_I2CEN BIT(23) +#define GI2CCTL_ADDR_MASK (0x7f << 16) +#define GI2CCTL_ADDR_SHIFT 16 +#define GI2CCTL_REGADDR_MASK (0xff << 8) +#define GI2CCTL_REGADDR_SHIFT 8 +#define GI2CCTL_RWDATA_MASK (0xff << 0) +#define GI2CCTL_RWDATA_SHIFT 0 + +#define GPVNDCTL HSOTG_REG(0x0034) +#define GGPIO HSOTG_REG(0x0038) +#define GGPIO_STM32_OTG_GCCFG_PWRDWN BIT(16) + +#define GUID HSOTG_REG(0x003c) +#define GSNPSID HSOTG_REG(0x0040) +#define GHWCFG1 HSOTG_REG(0x0044) +#define GSNPSID_ID_MASK GENMASK(31, 16) + +#define GHWCFG2 HSOTG_REG(0x0048) +#define GHWCFG2_OTG_ENABLE_IC_USB BIT(31) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1f << 26) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT 26 +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24) +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT 24 +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22) +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT 22 +#define GHWCFG2_MULTI_PROC_INT BIT(20) +#define GHWCFG2_DYNAMIC_FIFO BIT(19) +#define GHWCFG2_PERIO_EP_SUPPORTED BIT(18) +#define GHWCFG2_NUM_HOST_CHAN_MASK (0xf << 14) +#define GHWCFG2_NUM_HOST_CHAN_SHIFT 14 +#define GHWCFG2_NUM_DEV_EP_MASK (0xf << 10) +#define GHWCFG2_NUM_DEV_EP_SHIFT 10 +#define GHWCFG2_FS_PHY_TYPE_MASK (0x3 << 8) +#define GHWCFG2_FS_PHY_TYPE_SHIFT 8 +#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_FS_PHY_TYPE_DEDICATED 1 +#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI 2 +#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI 3 +#define GHWCFG2_HS_PHY_TYPE_MASK (0x3 << 6) +#define GHWCFG2_HS_PHY_TYPE_SHIFT 6 +#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_HS_PHY_TYPE_UTMI 1 +#define GHWCFG2_HS_PHY_TYPE_ULPI 2 +#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 +#define GHWCFG2_POINT2POINT BIT(5) +#define GHWCFG2_ARCHITECTURE_MASK (0x3 << 3) +#define GHWCFG2_ARCHITECTURE_SHIFT 3 +#define GHWCFG2_SLAVE_ONLY_ARCH 0 +#define GHWCFG2_EXT_DMA_ARCH 1 +#define GHWCFG2_INT_DMA_ARCH 2 +#define GHWCFG2_OP_MODE_MASK (0x7 << 0) +#define GHWCFG2_OP_MODE_SHIFT 0 +#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE 0 +#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE 1 +#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE 2 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 +#define GHWCFG2_OP_MODE_UNDEFINED 7 + +#define GHWCFG3 HSOTG_REG(0x004c) +#define GHWCFG3_DFIFO_DEPTH_MASK (0xffff << 16) +#define GHWCFG3_DFIFO_DEPTH_SHIFT 16 +#define GHWCFG3_OTG_LPM_EN BIT(15) +#define GHWCFG3_BC_SUPPORT BIT(14) +#define GHWCFG3_OTG_ENABLE_HSIC BIT(13) +#define GHWCFG3_ADP_SUPP BIT(12) +#define GHWCFG3_SYNCH_RESET_TYPE BIT(11) +#define GHWCFG3_OPTIONAL_FEATURES BIT(10) +#define GHWCFG3_VENDOR_CTRL_IF BIT(9) +#define GHWCFG3_I2C BIT(8) +#define GHWCFG3_OTG_FUNC BIT(7) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT 4 +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xf << 0) +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT 0 + +#define GHWCFG4 HSOTG_REG(0x0050) +#define GHWCFG4_DESC_DMA_DYN BIT(31) +#define GHWCFG4_DESC_DMA BIT(30) +#define GHWCFG4_NUM_IN_EPS_MASK (0xf << 26) +#define GHWCFG4_NUM_IN_EPS_SHIFT 26 +#define GHWCFG4_DED_FIFO_EN BIT(25) +#define GHWCFG4_DED_FIFO_SHIFT 25 +#define GHWCFG4_SESSION_END_FILT_EN BIT(24) +#define GHWCFG4_B_VALID_FILT_EN BIT(23) +#define GHWCFG4_A_VALID_FILT_EN BIT(22) +#define GHWCFG4_VBUS_VALID_FILT_EN BIT(21) +#define GHWCFG4_IDDIG_FILT_EN BIT(20) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xf << 16) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT 16 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14) +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2 +#define GHWCFG4_ACG_SUPPORTED BIT(12) +#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11) +#define GHWCFG4_SERVICE_INTERVAL_SUPPORTED BIT(10) +#define GHWCFG4_XHIBER BIT(7) +#define GHWCFG4_HIBER BIT(6) +#define GHWCFG4_MIN_AHB_FREQ BIT(5) +#define GHWCFG4_POWER_OPTIMIZ BIT(4) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xf << 0) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT 0 + +#define GLPMCFG HSOTG_REG(0x0054) +#define GLPMCFG_INVSELHSIC BIT(31) +#define GLPMCFG_HSICCON BIT(30) +#define GLPMCFG_RSTRSLPSTS BIT(29) +#define GLPMCFG_ENBESL BIT(28) +#define GLPMCFG_LPM_RETRYCNT_STS_MASK (0x7 << 25) +#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT 25 +#define GLPMCFG_SNDLPM BIT(24) +#define GLPMCFG_RETRY_CNT_MASK (0x7 << 21) +#define GLPMCFG_RETRY_CNT_SHIFT 21 +#define GLPMCFG_LPM_REJECT_CTRL_CONTROL BIT(21) +#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22) +#define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17) +#define GLPMCFG_LPM_CHNL_INDX_SHIFT 17 +#define GLPMCFG_L1RESUMEOK BIT(16) +#define GLPMCFG_SLPSTS BIT(15) +#define GLPMCFG_COREL1RES_MASK (0x3 << 13) +#define GLPMCFG_COREL1RES_SHIFT 13 +#define GLPMCFG_HIRD_THRES_MASK (0x1f << 8) +#define GLPMCFG_HIRD_THRES_SHIFT 8 +#define GLPMCFG_HIRD_THRES_EN (0x10 << 8) +#define GLPMCFG_ENBLSLPM BIT(7) +#define GLPMCFG_BREMOTEWAKE BIT(6) +#define GLPMCFG_HIRD_MASK (0xf << 2) +#define GLPMCFG_HIRD_SHIFT 2 +#define GLPMCFG_APPL1RES BIT(1) +#define GLPMCFG_LPMCAP BIT(0) + +#define GPWRDN HSOTG_REG(0x0058) +#define GPWRDN_MULT_VAL_ID_BC_MASK (0x1f << 24) +#define GPWRDN_MULT_VAL_ID_BC_SHIFT 24 +#define GPWRDN_ADP_INT BIT(23) +#define GPWRDN_BSESSVLD BIT(22) +#define GPWRDN_IDSTS BIT(21) +#define GPWRDN_LINESTATE_MASK (0x3 << 19) +#define GPWRDN_LINESTATE_SHIFT 19 +#define GPWRDN_STS_CHGINT_MSK BIT(18) +#define GPWRDN_STS_CHGINT BIT(17) +#define GPWRDN_SRP_DET_MSK BIT(16) +#define GPWRDN_SRP_DET BIT(15) +#define GPWRDN_CONNECT_DET_MSK BIT(14) +#define GPWRDN_CONNECT_DET BIT(13) +#define GPWRDN_DISCONN_DET_MSK BIT(12) +#define GPWRDN_DISCONN_DET BIT(11) +#define GPWRDN_RST_DET_MSK BIT(10) +#define GPWRDN_RST_DET BIT(9) +#define GPWRDN_LNSTSCHG_MSK BIT(8) +#define GPWRDN_LNSTSCHG BIT(7) +#define GPWRDN_DIS_VBUS BIT(6) +#define GPWRDN_PWRDNSWTCH BIT(5) +#define GPWRDN_PWRDNRSTN BIT(4) +#define GPWRDN_PWRDNCLMP BIT(3) +#define GPWRDN_RESTORE BIT(2) +#define GPWRDN_PMUACTV BIT(1) +#define GPWRDN_PMUINTSEL BIT(0) + +#define GDFIFOCFG HSOTG_REG(0x005c) +#define GDFIFOCFG_EPINFOBASE_MASK (0xffff << 16) +#define GDFIFOCFG_EPINFOBASE_SHIFT 16 +#define GDFIFOCFG_GDFIFOCFG_MASK (0xffff << 0) +#define GDFIFOCFG_GDFIFOCFG_SHIFT 0 + +#define ADPCTL HSOTG_REG(0x0060) +#define ADPCTL_AR_MASK (0x3 << 27) +#define ADPCTL_AR_SHIFT 27 +#define ADPCTL_ADP_TMOUT_INT_MSK BIT(26) +#define ADPCTL_ADP_SNS_INT_MSK BIT(25) +#define ADPCTL_ADP_PRB_INT_MSK BIT(24) +#define ADPCTL_ADP_TMOUT_INT BIT(23) +#define ADPCTL_ADP_SNS_INT BIT(22) +#define ADPCTL_ADP_PRB_INT BIT(21) +#define ADPCTL_ADPENA BIT(20) +#define ADPCTL_ADPRES BIT(19) +#define ADPCTL_ENASNS BIT(18) +#define ADPCTL_ENAPRB BIT(17) +#define ADPCTL_RTIM_MASK (0x7ff << 6) +#define ADPCTL_RTIM_SHIFT 6 +#define ADPCTL_PRB_PER_MASK (0x3 << 4) +#define ADPCTL_PRB_PER_SHIFT 4 +#define ADPCTL_PRB_DELTA_MASK (0x3 << 2) +#define ADPCTL_PRB_DELTA_SHIFT 2 +#define ADPCTL_PRB_DSCHRG_MASK (0x3 << 0) +#define ADPCTL_PRB_DSCHRG_SHIFT 0 + +#define GREFCLK HSOTG_REG(0x0064) +#define GREFCLK_REFCLKPER_MASK (0x1ffff << 15) +#define GREFCLK_REFCLKPER_SHIFT 15 +#define GREFCLK_REF_CLK_MODE BIT(14) +#define GREFCLK_SOF_CNT_WKUP_ALERT_MASK (0x3ff) +#define GREFCLK_SOF_CNT_WKUP_ALERT_SHIFT 0 + +#define GINTMSK2 HSOTG_REG(0x0068) +#define GINTMSK2_WKUP_ALERT_INT_MSK BIT(0) + +#define GINTSTS2 HSOTG_REG(0x006c) +#define GINTSTS2_WKUP_ALERT_INT BIT(0) + +#define HPTXFSIZ HSOTG_REG(0x100) +/* Use FIFOSIZE_* constants to access this register */ + +#define DPTXFSIZN(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) +/* Use FIFOSIZE_* constants to access this register */ + +/* These apply to the GNPTXFSIZ, HPTXFSIZ and DPTXFSIZN registers */ +#define FIFOSIZE_DEPTH_MASK (0xffff << 16) +#define FIFOSIZE_DEPTH_SHIFT 16 +#define FIFOSIZE_STARTADDR_MASK (0xffff << 0) +#define FIFOSIZE_STARTADDR_SHIFT 0 +#define FIFOSIZE_DEPTH_GET(_x) (((_x) >> 16) & 0xffff) + +/* Device mode registers */ + +#define DCFG HSOTG_REG(0x800) +#define DCFG_DESCDMA_EN BIT(23) +#define DCFG_EPMISCNT_MASK (0x1f << 18) +#define DCFG_EPMISCNT_SHIFT 18 +#define DCFG_EPMISCNT_LIMIT 0x1f +#define DCFG_EPMISCNT(_x) ((_x) << 18) +#define DCFG_IPG_ISOC_SUPPORDED BIT(17) +#define DCFG_PERFRINT_MASK (0x3 << 11) +#define DCFG_PERFRINT_SHIFT 11 +#define DCFG_PERFRINT_LIMIT 0x3 +#define DCFG_PERFRINT(_x) ((_x) << 11) +#define DCFG_DEVADDR_MASK (0x7f << 4) +#define DCFG_DEVADDR_SHIFT 4 +#define DCFG_DEVADDR_LIMIT 0x7f +#define DCFG_DEVADDR(_x) ((_x) << 4) +#define DCFG_NZ_STS_OUT_HSHK BIT(2) +#define DCFG_DEVSPD_MASK (0x3 << 0) +#define DCFG_DEVSPD_SHIFT 0 +#define DCFG_DEVSPD_HS 0 +#define DCFG_DEVSPD_FS 1 +#define DCFG_DEVSPD_LS 2 +#define DCFG_DEVSPD_FS48 3 + +#define DCTL HSOTG_REG(0x804) +#define DCTL_SERVICE_INTERVAL_SUPPORTED BIT(19) +#define DCTL_PWRONPRGDONE BIT(11) +#define DCTL_CGOUTNAK BIT(10) +#define DCTL_SGOUTNAK BIT(9) +#define DCTL_CGNPINNAK BIT(8) +#define DCTL_SGNPINNAK BIT(7) +#define DCTL_TSTCTL_MASK (0x7 << 4) +#define DCTL_TSTCTL_SHIFT 4 +#define DCTL_GOUTNAKSTS BIT(3) +#define DCTL_GNPINNAKSTS BIT(2) +#define DCTL_SFTDISCON BIT(1) +#define DCTL_RMTWKUPSIG BIT(0) + +#define DSTS HSOTG_REG(0x808) +#define DSTS_SOFFN_MASK (0x3fff << 8) +#define DSTS_SOFFN_SHIFT 8 +#define DSTS_SOFFN_LIMIT 0x3fff +#define DSTS_SOFFN(_x) ((_x) << 8) +#define DSTS_ERRATICERR BIT(3) +#define DSTS_ENUMSPD_MASK (0x3 << 1) +#define DSTS_ENUMSPD_SHIFT 1 +#define DSTS_ENUMSPD_HS 0 +#define DSTS_ENUMSPD_FS 1 +#define DSTS_ENUMSPD_LS 2 +#define DSTS_ENUMSPD_FS48 3 +#define DSTS_SUSPSTS BIT(0) + +#define DIEPMSK HSOTG_REG(0x810) +#define DIEPMSK_NAKMSK BIT(13) +#define DIEPMSK_BNAININTRMSK BIT(9) +#define DIEPMSK_TXFIFOUNDRNMSK BIT(8) +#define DIEPMSK_TXFIFOEMPTY BIT(7) +#define DIEPMSK_INEPNAKEFFMSK BIT(6) +#define DIEPMSK_INTKNEPMISMSK BIT(5) +#define DIEPMSK_INTKNTXFEMPMSK BIT(4) +#define DIEPMSK_TIMEOUTMSK BIT(3) +#define DIEPMSK_AHBERRMSK BIT(2) +#define DIEPMSK_EPDISBLDMSK BIT(1) +#define DIEPMSK_XFERCOMPLMSK BIT(0) + +#define DOEPMSK HSOTG_REG(0x814) +#define DOEPMSK_BNAMSK BIT(9) +#define DOEPMSK_BACK2BACKSETUP BIT(6) +#define DOEPMSK_STSPHSERCVDMSK BIT(5) +#define DOEPMSK_OUTTKNEPDISMSK BIT(4) +#define DOEPMSK_SETUPMSK BIT(3) +#define DOEPMSK_AHBERRMSK BIT(2) +#define DOEPMSK_EPDISBLDMSK BIT(1) +#define DOEPMSK_XFERCOMPLMSK BIT(0) + +#define DAINT HSOTG_REG(0x818) +#define DAINTMSK HSOTG_REG(0x81C) +#define DAINT_OUTEP_SHIFT 16 +#define DAINT_OUTEP(_x) (1 << ((_x) + 16)) +#define DAINT_INEP(_x) (1 << (_x)) + +#define DTKNQR1 HSOTG_REG(0x820) +#define DTKNQR2 HSOTG_REG(0x824) +#define DTKNQR3 HSOTG_REG(0x830) +#define DTKNQR4 HSOTG_REG(0x834) +#define DIEPEMPMSK HSOTG_REG(0x834) + +#define DVBUSDIS HSOTG_REG(0x828) +#define DVBUSPULSE HSOTG_REG(0x82C) + +#define DIEPCTL0 HSOTG_REG(0x900) +#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) + +#define DOEPCTL0 HSOTG_REG(0xB00) +#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting different for EP0 + */ +#define D0EPCTL_MPS_MASK (0x3 << 0) +#define D0EPCTL_MPS_SHIFT 0 +#define D0EPCTL_MPS_64 0 +#define D0EPCTL_MPS_32 1 +#define D0EPCTL_MPS_16 2 +#define D0EPCTL_MPS_8 3 + +#define DXEPCTL_EPENA BIT(31) +#define DXEPCTL_EPDIS BIT(30) +#define DXEPCTL_SETD1PID BIT(29) +#define DXEPCTL_SETODDFR BIT(29) +#define DXEPCTL_SETD0PID BIT(28) +#define DXEPCTL_SETEVENFR BIT(28) +#define DXEPCTL_SNAK BIT(27) +#define DXEPCTL_CNAK BIT(26) +#define DXEPCTL_TXFNUM_MASK (0xf << 22) +#define DXEPCTL_TXFNUM_SHIFT 22 +#define DXEPCTL_TXFNUM_LIMIT 0xf +#define DXEPCTL_TXFNUM(_x) ((_x) << 22) +#define DXEPCTL_STALL BIT(21) +#define DXEPCTL_SNP BIT(20) +#define DXEPCTL_EPTYPE_MASK (0x3 << 18) +#define DXEPCTL_EPTYPE_CONTROL (0x0 << 18) +#define DXEPCTL_EPTYPE_ISO (0x1 << 18) +#define DXEPCTL_EPTYPE_BULK (0x2 << 18) +#define DXEPCTL_EPTYPE_INTERRUPT (0x3 << 18) + +#define DXEPCTL_NAKSTS BIT(17) +#define DXEPCTL_DPID BIT(16) +#define DXEPCTL_EOFRNUM BIT(16) +#define DXEPCTL_USBACTEP BIT(15) +#define DXEPCTL_NEXTEP_MASK (0xf << 11) +#define DXEPCTL_NEXTEP_SHIFT 11 +#define DXEPCTL_NEXTEP_LIMIT 0xf +#define DXEPCTL_NEXTEP(_x) ((_x) << 11) +#define DXEPCTL_MPS_MASK (0x7ff << 0) +#define DXEPCTL_MPS_SHIFT 0 +#define DXEPCTL_MPS_LIMIT 0x7ff +#define DXEPCTL_MPS(_x) ((_x) << 0) + +#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) +#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) +#define DXEPINT_SETUP_RCVD BIT(15) +#define DXEPINT_NYETINTRPT BIT(14) +#define DXEPINT_NAKINTRPT BIT(13) +#define DXEPINT_BBLEERRINTRPT BIT(12) +#define DXEPINT_PKTDRPSTS BIT(11) +#define DXEPINT_BNAINTR BIT(9) +#define DXEPINT_TXFIFOUNDRN BIT(8) +#define DXEPINT_OUTPKTERR BIT(8) +#define DXEPINT_TXFEMP BIT(7) +#define DXEPINT_INEPNAKEFF BIT(6) +#define DXEPINT_BACK2BACKSETUP BIT(6) +#define DXEPINT_INTKNEPMIS BIT(5) +#define DXEPINT_STSPHSERCVD BIT(5) +#define DXEPINT_INTKNTXFEMP BIT(4) +#define DXEPINT_OUTTKNEPDIS BIT(4) +#define DXEPINT_TIMEOUT BIT(3) +#define DXEPINT_SETUP BIT(3) +#define DXEPINT_AHBERR BIT(2) +#define DXEPINT_EPDISBLD BIT(1) +#define DXEPINT_XFERCOMPL BIT(0) + +#define DIEPTSIZ0 HSOTG_REG(0x910) +#define DIEPTSIZ0_PKTCNT_MASK (0x3 << 19) +#define DIEPTSIZ0_PKTCNT_SHIFT 19 +#define DIEPTSIZ0_PKTCNT_LIMIT 0x3 +#define DIEPTSIZ0_PKTCNT(_x) ((_x) << 19) +#define DIEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DIEPTSIZ0_XFERSIZE_SHIFT 0 +#define DIEPTSIZ0_XFERSIZE_LIMIT 0x7f +#define DIEPTSIZ0_XFERSIZE(_x) ((_x) << 0) + +#define DOEPTSIZ0 HSOTG_REG(0xB10) +#define DOEPTSIZ0_SUPCNT_MASK (0x3 << 29) +#define DOEPTSIZ0_SUPCNT_SHIFT 29 +#define DOEPTSIZ0_SUPCNT_LIMIT 0x3 +#define DOEPTSIZ0_SUPCNT(_x) ((_x) << 29) +#define DOEPTSIZ0_PKTCNT BIT(19) +#define DOEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DOEPTSIZ0_XFERSIZE_SHIFT 0 + +#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) +#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) +#define DXEPTSIZ_MC_MASK (0x3 << 29) +#define DXEPTSIZ_MC_SHIFT 29 +#define DXEPTSIZ_MC_LIMIT 0x3 +#define DXEPTSIZ_MC(_x) ((_x) << 29) +#define DXEPTSIZ_PKTCNT_MASK (0x3ff << 19) +#define DXEPTSIZ_PKTCNT_SHIFT 19 +#define DXEPTSIZ_PKTCNT_LIMIT 0x3ff +#define DXEPTSIZ_PKTCNT_GET(_v) (((_v) >> 19) & 0x3ff) +#define DXEPTSIZ_PKTCNT(_x) ((_x) << 19) +#define DXEPTSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define DXEPTSIZ_XFERSIZE_SHIFT 0 +#define DXEPTSIZ_XFERSIZE_LIMIT 0x7ffff +#define DXEPTSIZ_XFERSIZE_GET(_v) (((_v) >> 0) & 0x7ffff) +#define DXEPTSIZ_XFERSIZE(_x) ((_x) << 0) + +#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) +#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) + +#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define PCGCTL HSOTG_REG(0x0e00) +#define PCGCTL_IF_DEV_MODE BIT(31) +#define PCGCTL_P2HD_PRT_SPD_MASK (0x3 << 29) +#define PCGCTL_P2HD_PRT_SPD_SHIFT 29 +#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK (0x3 << 27) +#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT 27 +#define PCGCTL_MAC_DEV_ADDR_MASK (0x7f << 20) +#define PCGCTL_MAC_DEV_ADDR_SHIFT 20 +#define PCGCTL_MAX_TERMSEL BIT(19) +#define PCGCTL_MAX_XCVRSELECT_MASK (0x3 << 17) +#define PCGCTL_MAX_XCVRSELECT_SHIFT 17 +#define PCGCTL_PORT_POWER BIT(16) +#define PCGCTL_PRT_CLK_SEL_MASK (0x3 << 14) +#define PCGCTL_PRT_CLK_SEL_SHIFT 14 +#define PCGCTL_ESS_REG_RESTORED BIT(13) +#define PCGCTL_EXTND_HIBER_SWITCH BIT(12) +#define PCGCTL_EXTND_HIBER_PWRCLMP BIT(11) +#define PCGCTL_ENBL_EXTND_HIBER BIT(10) +#define PCGCTL_RESTOREMODE BIT(9) +#define PCGCTL_RESETAFTSUSP BIT(8) +#define PCGCTL_DEEP_SLEEP BIT(7) +#define PCGCTL_PHY_IN_SLEEP BIT(6) +#define PCGCTL_ENBL_SLEEP_GATING BIT(5) +#define PCGCTL_RSTPDWNMODULE BIT(3) +#define PCGCTL_PWRCLMP BIT(2) +#define PCGCTL_GATEHCLK BIT(1) +#define PCGCTL_STOPPCLK BIT(0) + +#define PCGCCTL1 HSOTG_REG(0xe04) +#define PCGCCTL1_TIMER (0x3 << 1) +#define PCGCCTL1_GATEEN BIT(0) + +#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +/* Host Mode Registers */ + +#define HCFG HSOTG_REG(0x0400) +#define HCFG_MODECHTIMEN BIT(31) +#define HCFG_PERSCHEDENA BIT(26) +#define HCFG_FRLISTEN_MASK (0x3 << 24) +#define HCFG_FRLISTEN_SHIFT 24 +#define HCFG_FRLISTEN_8 (0 << 24) +#define FRLISTEN_8_SIZE 8 +#define HCFG_FRLISTEN_16 BIT(24) +#define FRLISTEN_16_SIZE 16 +#define HCFG_FRLISTEN_32 (2 << 24) +#define FRLISTEN_32_SIZE 32 +#define HCFG_FRLISTEN_64 (3 << 24) +#define FRLISTEN_64_SIZE 64 +#define HCFG_DESCDMA BIT(23) +#define HCFG_RESVALID_MASK (0xff << 8) +#define HCFG_RESVALID_SHIFT 8 +#define HCFG_ENA32KHZ BIT(7) +#define HCFG_FSLSSUPP BIT(2) +#define HCFG_FSLSPCLKSEL_MASK (0x3 << 0) +#define HCFG_FSLSPCLKSEL_SHIFT 0 +#define HCFG_FSLSPCLKSEL_30_60_MHZ 0 +#define HCFG_FSLSPCLKSEL_48_MHZ 1 +#define HCFG_FSLSPCLKSEL_6_MHZ 2 + +#define HFIR HSOTG_REG(0x0404) +#define HFIR_FRINT_MASK (0xffff << 0) +#define HFIR_FRINT_SHIFT 0 +#define HFIR_RLDCTRL BIT(16) + +#define HFNUM HSOTG_REG(0x0408) +#define HFNUM_FRREM_MASK (0xffff << 16) +#define HFNUM_FRREM_SHIFT 16 +#define HFNUM_FRNUM_MASK (0xffff << 0) +#define HFNUM_FRNUM_SHIFT 0 +#define HFNUM_MAX_FRNUM 0x3fff + +#define HPTXSTS HSOTG_REG(0x0410) +#define TXSTS_QTOP_ODD BIT(31) +#define TXSTS_QTOP_CHNEP_MASK (0xf << 27) +#define TXSTS_QTOP_CHNEP_SHIFT 27 +#define TXSTS_QTOP_TOKEN_MASK (0x3 << 25) +#define TXSTS_QTOP_TOKEN_SHIFT 25 +#define TXSTS_QTOP_TERMINATE BIT(24) +#define TXSTS_QSPCAVAIL_MASK (0xff << 16) +#define TXSTS_QSPCAVAIL_SHIFT 16 +#define TXSTS_FSPCAVAIL_MASK (0xffff << 0) +#define TXSTS_FSPCAVAIL_SHIFT 0 + +#define HAINT HSOTG_REG(0x0414) +#define HAINTMSK HSOTG_REG(0x0418) +#define HFLBADDR HSOTG_REG(0x041c) + +#define HPRT0 HSOTG_REG(0x0440) +#define HPRT0_SPD_MASK (0x3 << 17) +#define HPRT0_SPD_SHIFT 17 +#define HPRT0_SPD_HIGH_SPEED 0 +#define HPRT0_SPD_FULL_SPEED 1 +#define HPRT0_SPD_LOW_SPEED 2 +#define HPRT0_TSTCTL_MASK (0xf << 13) +#define HPRT0_TSTCTL_SHIFT 13 +#define HPRT0_PWR BIT(12) +#define HPRT0_LNSTS_MASK (0x3 << 10) +#define HPRT0_LNSTS_SHIFT 10 +#define HPRT0_RST BIT(8) +#define HPRT0_SUSP BIT(7) +#define HPRT0_RES BIT(6) +#define HPRT0_OVRCURRCHG BIT(5) +#define HPRT0_OVRCURRACT BIT(4) +#define HPRT0_ENACHG BIT(3) +#define HPRT0_ENA BIT(2) +#define HPRT0_CONNDET BIT(1) +#define HPRT0_CONNSTS BIT(0) + +#define HCCHAR(_ch) HSOTG_REG(0x0500 + 0x20 * (_ch)) +#define HCCHAR_CHENA BIT(31) +#define HCCHAR_CHDIS BIT(30) +#define HCCHAR_ODDFRM BIT(29) +#define HCCHAR_DEVADDR_MASK (0x7f << 22) +#define HCCHAR_DEVADDR_SHIFT 22 +#define HCCHAR_MULTICNT_MASK (0x3 << 20) +#define HCCHAR_MULTICNT_SHIFT 20 +#define HCCHAR_EPTYPE_MASK (0x3 << 18) +#define HCCHAR_EPTYPE_SHIFT 18 +#define HCCHAR_LSPDDEV BIT(17) +#define HCCHAR_EPDIR BIT(15) +#define HCCHAR_EPNUM_MASK (0xf << 11) +#define HCCHAR_EPNUM_SHIFT 11 +#define HCCHAR_MPS_MASK (0x7ff << 0) +#define HCCHAR_MPS_SHIFT 0 + +#define HCSPLT(_ch) HSOTG_REG(0x0504 + 0x20 * (_ch)) +#define HCSPLT_SPLTENA BIT(31) +#define HCSPLT_COMPSPLT BIT(16) +#define HCSPLT_XACTPOS_MASK (0x3 << 14) +#define HCSPLT_XACTPOS_SHIFT 14 +#define HCSPLT_XACTPOS_MID 0 +#define HCSPLT_XACTPOS_END 1 +#define HCSPLT_XACTPOS_BEGIN 2 +#define HCSPLT_XACTPOS_ALL 3 +#define HCSPLT_HUBADDR_MASK (0x7f << 7) +#define HCSPLT_HUBADDR_SHIFT 7 +#define HCSPLT_PRTADDR_MASK (0x7f << 0) +#define HCSPLT_PRTADDR_SHIFT 0 + +#define HCINT(_ch) HSOTG_REG(0x0508 + 0x20 * (_ch)) +#define HCINTMSK(_ch) HSOTG_REG(0x050c + 0x20 * (_ch)) +#define HCINTMSK_RESERVED14_31 (0x3ffff << 14) +#define HCINTMSK_FRM_LIST_ROLL BIT(13) +#define HCINTMSK_XCS_XACT BIT(12) +#define HCINTMSK_BNA BIT(11) +#define HCINTMSK_DATATGLERR BIT(10) +#define HCINTMSK_FRMOVRUN BIT(9) +#define HCINTMSK_BBLERR BIT(8) +#define HCINTMSK_XACTERR BIT(7) +#define HCINTMSK_NYET BIT(6) +#define HCINTMSK_ACK BIT(5) +#define HCINTMSK_NAK BIT(4) +#define HCINTMSK_STALL BIT(3) +#define HCINTMSK_AHBERR BIT(2) +#define HCINTMSK_CHHLTD BIT(1) +#define HCINTMSK_XFERCOMPL BIT(0) + +#define HCTSIZ(_ch) HSOTG_REG(0x0510 + 0x20 * (_ch)) +#define TSIZ_DOPNG BIT(31) +#define TSIZ_SC_MC_PID_MASK (0x3 << 29) +#define TSIZ_SC_MC_PID_SHIFT 29 +#define TSIZ_SC_MC_PID_DATA0 0 +#define TSIZ_SC_MC_PID_DATA2 1 +#define TSIZ_SC_MC_PID_DATA1 2 +#define TSIZ_SC_MC_PID_MDATA 3 +#define TSIZ_SC_MC_PID_SETUP 3 +#define TSIZ_PKTCNT_MASK (0x3ff << 19) +#define TSIZ_PKTCNT_SHIFT 19 +#define TSIZ_NTD_MASK (0xff << 8) +#define TSIZ_NTD_SHIFT 8 +#define TSIZ_SCHINFO_MASK (0xff << 0) +#define TSIZ_SCHINFO_SHIFT 0 +#define TSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define TSIZ_XFERSIZE_SHIFT 0 + +#define HCDMA(_ch) HSOTG_REG(0x0514 + 0x20 * (_ch)) + +#define HCDMAB(_ch) HSOTG_REG(0x051c + 0x20 * (_ch)) + +#define HCFIFO(_ch) HSOTG_REG(0x1000 + 0x1000 * (_ch)) + +/** + * struct dwc2_dma_desc - DMA descriptor structure, + * used for both host and gadget modes + * + * @status: DMA descriptor status quadlet + * @buf: DMA descriptor data buffer pointer + * + * DMA Descriptor structure contains two quadlets: + * Status quadlet and Data buffer pointer. + */ +struct dwc2_dma_desc { + uint32_t status; + uint32_t buf; +} __packed; + +/* Host Mode DMA descriptor status quadlet */ + +#define HOST_DMA_A BIT(31) +#define HOST_DMA_STS_MASK (0x3 << 28) +#define HOST_DMA_STS_SHIFT 28 +#define HOST_DMA_STS_PKTERR BIT(28) +#define HOST_DMA_EOL BIT(26) +#define HOST_DMA_IOC BIT(25) +#define HOST_DMA_SUP BIT(24) +#define HOST_DMA_ALT_QTD BIT(23) +#define HOST_DMA_QTD_OFFSET_MASK (0x3f << 17) +#define HOST_DMA_QTD_OFFSET_SHIFT 17 +#define HOST_DMA_ISOC_NBYTES_MASK (0xfff << 0) +#define HOST_DMA_ISOC_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_MASK (0x1ffff << 0) +#define HOST_DMA_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_LIMIT 131071 + +/* Device Mode DMA descriptor status quadlet */ + +#define DEV_DMA_BUFF_STS_MASK (0x3 << 30) +#define DEV_DMA_BUFF_STS_SHIFT 30 +#define DEV_DMA_BUFF_STS_HREADY 0 +#define DEV_DMA_BUFF_STS_DMABUSY 1 +#define DEV_DMA_BUFF_STS_DMADONE 2 +#define DEV_DMA_BUFF_STS_HBUSY 3 +#define DEV_DMA_STS_MASK (0x3 << 28) +#define DEV_DMA_STS_SHIFT 28 +#define DEV_DMA_STS_SUCC 0 +#define DEV_DMA_STS_BUFF_FLUSH 1 +#define DEV_DMA_STS_BUFF_ERR 3 +#define DEV_DMA_L BIT(27) +#define DEV_DMA_SHORT BIT(26) +#define DEV_DMA_IOC BIT(25) +#define DEV_DMA_SR BIT(24) +#define DEV_DMA_MTRF BIT(23) +#define DEV_DMA_ISOC_PID_MASK (0x3 << 23) +#define DEV_DMA_ISOC_PID_SHIFT 23 +#define DEV_DMA_ISOC_PID_DATA0 0 +#define DEV_DMA_ISOC_PID_DATA2 1 +#define DEV_DMA_ISOC_PID_DATA1 2 +#define DEV_DMA_ISOC_PID_MDATA 3 +#define DEV_DMA_ISOC_FRNUM_MASK (0x7ff << 12) +#define DEV_DMA_ISOC_FRNUM_SHIFT 12 +#define DEV_DMA_ISOC_TX_NBYTES_MASK (0xfff << 0) +#define DEV_DMA_ISOC_TX_NBYTES_LIMIT 0xfff +#define DEV_DMA_ISOC_RX_NBYTES_MASK (0x7ff << 0) +#define DEV_DMA_ISOC_RX_NBYTES_LIMIT 0x7ff +#define DEV_DMA_ISOC_NBYTES_SHIFT 0 +#define DEV_DMA_NBYTES_MASK (0xffff << 0) +#define DEV_DMA_NBYTES_SHIFT 0 +#define DEV_DMA_NBYTES_LIMIT 0xffff + +#define MAX_DMA_DESC_NUM_GENERIC 64 +#define MAX_DMA_DESC_NUM_HS_ISOC 256 + +#endif /* __DWC2_HW_H__ */ -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add the dwc-hsotg (dwc2) USB host controller state definitions. Mostly based on hw/usb/hcd-ehci.h. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-4-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-dwc2.h | 190 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 hw/usb/hcd-dwc2.h diff --git a/hw/usb/hcd-dwc2.h b/hw/usb/hcd-dwc2.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/hcd-dwc2.h @@ -XXX,XX +XXX,XX @@ +/* + * dwc-hsotg (dwc2) USB host controller state definitions + * + * Based on hw/usb/hcd-ehci.h + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef HW_USB_DWC2_H +#define HW_USB_DWC2_H + +#include "qemu/timer.h" +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "hw/usb.h" +#include "sysemu/dma.h" + +#define DWC2_MMIO_SIZE 0x11000 + +#define DWC2_NB_CHAN 8 /* Number of host channels */ +#define DWC2_MAX_XFER_SIZE 65536 /* Max transfer size expected in HCTSIZ */ + +typedef struct DWC2Packet DWC2Packet; +typedef struct DWC2State DWC2State; +typedef struct DWC2Class DWC2Class; + +enum async_state { + DWC2_ASYNC_NONE = 0, + DWC2_ASYNC_INITIALIZED, + DWC2_ASYNC_INFLIGHT, + DWC2_ASYNC_FINISHED, +}; + +struct DWC2Packet { + USBPacket packet; + uint32_t devadr; + uint32_t epnum; + uint32_t epdir; + uint32_t mps; + uint32_t pid; + uint32_t index; + uint32_t pcnt; + uint32_t len; + int32_t async; + bool small; + bool needs_service; +}; + +struct DWC2State { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + USBBus bus; + qemu_irq irq; + MemoryRegion *dma_mr; + AddressSpace dma_as; + MemoryRegion container; + MemoryRegion hsotg; + MemoryRegion fifos; + + union { +#define DWC2_GLBREG_SIZE 0x70 + uint32_t glbreg[DWC2_GLBREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t gotgctl; /* 00 */ + uint32_t gotgint; /* 04 */ + uint32_t gahbcfg; /* 08 */ + uint32_t gusbcfg; /* 0c */ + uint32_t grstctl; /* 10 */ + uint32_t gintsts; /* 14 */ + uint32_t gintmsk; /* 18 */ + uint32_t grxstsr; /* 1c */ + uint32_t grxstsp; /* 20 */ + uint32_t grxfsiz; /* 24 */ + uint32_t gnptxfsiz; /* 28 */ + uint32_t gnptxsts; /* 2c */ + uint32_t gi2cctl; /* 30 */ + uint32_t gpvndctl; /* 34 */ + uint32_t ggpio; /* 38 */ + uint32_t guid; /* 3c */ + uint32_t gsnpsid; /* 40 */ + uint32_t ghwcfg1; /* 44 */ + uint32_t ghwcfg2; /* 48 */ + uint32_t ghwcfg3; /* 4c */ + uint32_t ghwcfg4; /* 50 */ + uint32_t glpmcfg; /* 54 */ + uint32_t gpwrdn; /* 58 */ + uint32_t gdfifocfg; /* 5c */ + uint32_t gadpctl; /* 60 */ + uint32_t grefclk; /* 64 */ + uint32_t gintmsk2; /* 68 */ + uint32_t gintsts2; /* 6c */ + }; + }; + + union { +#define DWC2_FSZREG_SIZE 0x04 + uint32_t fszreg[DWC2_FSZREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t hptxfsiz; /* 100 */ + }; + }; + + union { +#define DWC2_HREG0_SIZE 0x44 + uint32_t hreg0[DWC2_HREG0_SIZE / sizeof(uint32_t)]; + struct { + uint32_t hcfg; /* 400 */ + uint32_t hfir; /* 404 */ + uint32_t hfnum; /* 408 */ + uint32_t rsvd0; /* 40c */ + uint32_t hptxsts; /* 410 */ + uint32_t haint; /* 414 */ + uint32_t haintmsk; /* 418 */ + uint32_t hflbaddr; /* 41c */ + uint32_t rsvd1[8]; /* 420-43c */ + uint32_t hprt0; /* 440 */ + }; + }; + +#define DWC2_HREG1_SIZE (0x20 * DWC2_NB_CHAN) + uint32_t hreg1[DWC2_HREG1_SIZE / sizeof(uint32_t)]; + +#define hcchar(_ch) hreg1[((_ch) << 3) + 0] /* 500, 520, ... */ +#define hcsplt(_ch) hreg1[((_ch) << 3) + 1] /* 504, 524, ... */ +#define hcint(_ch) hreg1[((_ch) << 3) + 2] /* 508, 528, ... */ +#define hcintmsk(_ch) hreg1[((_ch) << 3) + 3] /* 50c, 52c, ... */ +#define hctsiz(_ch) hreg1[((_ch) << 3) + 4] /* 510, 530, ... */ +#define hcdma(_ch) hreg1[((_ch) << 3) + 5] /* 514, 534, ... */ +#define hcdmab(_ch) hreg1[((_ch) << 3) + 7] /* 51c, 53c, ... */ + + union { +#define DWC2_PCGREG_SIZE 0x08 + uint32_t pcgreg[DWC2_PCGREG_SIZE / sizeof(uint32_t)]; + struct { + uint32_t pcgctl; /* e00 */ + uint32_t pcgcctl1; /* e04 */ + }; + }; + + /* TODO - implement FIFO registers for slave mode */ +#define DWC2_HFIFO_SIZE (0x1000 * DWC2_NB_CHAN) + + /* + * Internal state + */ + QEMUTimer *eof_timer; + QEMUTimer *frame_timer; + QEMUBH *async_bh; + int64_t sof_time; + int64_t usb_frame_time; + int64_t usb_bit_time; + uint32_t usb_version; + uint16_t frame_number; + uint16_t fi; + uint16_t next_chan; + bool working; + USBPort uport; + DWC2Packet packet[DWC2_NB_CHAN]; /* one packet per chan */ + uint8_t usb_buf[DWC2_NB_CHAN][DWC2_MAX_XFER_SIZE]; /* one buffer per chan */ +}; + +struct DWC2Class { + /*< private >*/ + SysBusDeviceClass parent_class; + ResettablePhases parent_phases; + + /*< public >*/ +}; + +#define TYPE_DWC2_USB "dwc2-usb" +#define DWC2_USB(obj) \ + OBJECT_CHECK(DWC2State, (obj), TYPE_DWC2_USB) +#define DWC2_CLASS(klass) \ + OBJECT_CLASS_CHECK(DWC2Class, (klass), TYPE_DWC2_USB) +#define DWC2_GET_CLASS(obj) \ + OBJECT_GET_CLASS(DWC2Class, (obj), TYPE_DWC2_USB) + +#endif -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add the dwc-hsotg (dwc2) USB host controller emulation code. Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c. Note that to use this with the dwc-otg driver in the Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on the kernel command line. Emulation of slave mode and of descriptor-DMA mode has not been implemented yet. These modes are seldom used. I have used some on-line sources of information while developing this emulation, including: http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf which has a pretty complete description of the controller starting on page 370. https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf which has a description of the controller registers starting on page 130. Thanks to Felippe Mathieu-Daude for providing a cleaner method of implementing the memory regions for the controller registers. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-5-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-dwc2.c | 1417 ++++++++++++++++++++++++++++++++++++++++++ hw/usb/Kconfig | 5 + hw/usb/Makefile.objs | 1 + hw/usb/trace-events | 50 ++ 4 files changed, 1473 insertions(+) create mode 100644 hw/usb/hcd-dwc2.c diff --git a/hw/usb/hcd-dwc2.c b/hw/usb/hcd-dwc2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/hcd-dwc2.c @@ -XXX,XX +XXX,XX @@ +/* + * dwc-hsotg (dwc2) USB host controller emulation + * + * Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c + * + * Note that to use this emulation with the dwc-otg driver in the + * Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" + * on the kernel command line. + * + * Some useful documentation used to develop this emulation can be + * found online (as of April 2020) at: + * + * http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf + * which has a pretty complete description of the controller starting + * on page 370. + * + * https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf + * which has a description of the controller registers starting on + * page 130. + * + * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "hw/usb/dwc2-regs.h" +#include "hw/usb/hcd-dwc2.h" +#include "migration/vmstate.h" +#include "trace.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "qemu/main-loop.h" +#include "hw/qdev-properties.h" + +#define USB_HZ_FS 12000000 +#define USB_HZ_HS 96000000 +#define USB_FRMINTVL 12000 + +/* nifty macros from Arnon's EHCI version */ +#define get_field(data, field) \ + (((data) & field##_MASK) >> field##_SHIFT) + +#define set_field(data, newval, field) do { \ + uint32_t val = *(data); \ + val &= ~field##_MASK; \ + val |= ((newval) << field##_SHIFT) & field##_MASK; \ + *(data) = val; \ +} while (0) + +#define get_bit(data, bitmask) \ + (!!((data) & (bitmask))) + +/* update irq line */ +static inline void dwc2_update_irq(DWC2State *s) +{ + static int oldlevel; + int level = 0; + + if ((s->gintsts & s->gintmsk) && (s->gahbcfg & GAHBCFG_GLBL_INTR_EN)) { + level = 1; + } + if (level != oldlevel) { + oldlevel = level; + trace_usb_dwc2_update_irq(level); + qemu_set_irq(s->irq, level); + } +} + +/* flag interrupt condition */ +static inline void dwc2_raise_global_irq(DWC2State *s, uint32_t intr) +{ + if (!(s->gintsts & intr)) { + s->gintsts |= intr; + trace_usb_dwc2_raise_global_irq(intr); + dwc2_update_irq(s); + } +} + +static inline void dwc2_lower_global_irq(DWC2State *s, uint32_t intr) +{ + if (s->gintsts & intr) { + s->gintsts &= ~intr; + trace_usb_dwc2_lower_global_irq(intr); + dwc2_update_irq(s); + } +} + +static inline void dwc2_raise_host_irq(DWC2State *s, uint32_t host_intr) +{ + if (!(s->haint & host_intr)) { + s->haint |= host_intr; + s->haint &= 0xffff; + trace_usb_dwc2_raise_host_irq(host_intr); + if (s->haint & s->haintmsk) { + dwc2_raise_global_irq(s, GINTSTS_HCHINT); + } + } +} + +static inline void dwc2_lower_host_irq(DWC2State *s, uint32_t host_intr) +{ + if (s->haint & host_intr) { + s->haint &= ~host_intr; + trace_usb_dwc2_lower_host_irq(host_intr); + if (!(s->haint & s->haintmsk)) { + dwc2_lower_global_irq(s, GINTSTS_HCHINT); + } + } +} + +static inline void dwc2_update_hc_irq(DWC2State *s, int index) +{ + uint32_t host_intr = 1 << (index >> 3); + + if (s->hreg1[index + 2] & s->hreg1[index + 3]) { + dwc2_raise_host_irq(s, host_intr); + } else { + dwc2_lower_host_irq(s, host_intr); + } +} + +/* set a timer for EOF */ +static void dwc2_eof_timer(DWC2State *s) +{ + timer_mod(s->eof_timer, s->sof_time + s->usb_frame_time); +} + +/* Set a timer for EOF and generate SOF event */ +static void dwc2_sof(DWC2State *s) +{ + s->sof_time += s->usb_frame_time; + trace_usb_dwc2_sof(s->sof_time); + dwc2_eof_timer(s); + dwc2_raise_global_irq(s, GINTSTS_SOF); +} + +/* Do frame processing on frame boundary */ +static void dwc2_frame_boundary(void *opaque) +{ + DWC2State *s = opaque; + int64_t now; + uint16_t frcnt; + + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + /* Frame boundary, so do EOF stuff here */ + + /* Increment frame number */ + frcnt = (uint16_t)((now - s->sof_time) / s->fi); + s->frame_number = (s->frame_number + frcnt) & 0xffff; + s->hfnum = s->frame_number & HFNUM_MAX_FRNUM; + + /* Do SOF stuff here */ + dwc2_sof(s); +} + +/* Start sending SOF tokens on the USB bus */ +static void dwc2_bus_start(DWC2State *s) +{ + trace_usb_dwc2_bus_start(); + s->sof_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + dwc2_eof_timer(s); +} + +/* Stop sending SOF tokens on the USB bus */ +static void dwc2_bus_stop(DWC2State *s) +{ + trace_usb_dwc2_bus_stop(); + timer_del(s->eof_timer); +} + +static USBDevice *dwc2_find_device(DWC2State *s, uint8_t addr) +{ + USBDevice *dev; + + trace_usb_dwc2_find_device(addr); + + if (!(s->hprt0 & HPRT0_ENA)) { + trace_usb_dwc2_port_disabled(0); + } else { + dev = usb_find_device(&s->uport, addr); + if (dev != NULL) { + trace_usb_dwc2_device_found(0); + return dev; + } + } + + trace_usb_dwc2_device_not_found(); + return NULL; +} + +static const char *pstatus[] = { + "USB_RET_SUCCESS", "USB_RET_NODEV", "USB_RET_NAK", "USB_RET_STALL", + "USB_RET_BABBLE", "USB_RET_IOERROR", "USB_RET_ASYNC", + "USB_RET_ADD_TO_QUEUE", "USB_RET_REMOVE_FROM_QUEUE" +}; + +static uint32_t pintr[] = { + HCINTMSK_XFERCOMPL, HCINTMSK_XACTERR, HCINTMSK_NAK, HCINTMSK_STALL, + HCINTMSK_BBLERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, + HCINTMSK_XACTERR +}; + +static const char *types[] = { + "Ctrl", "Isoc", "Bulk", "Intr" +}; + +static const char *dirs[] = { + "Out", "In" +}; + +static void dwc2_handle_packet(DWC2State *s, uint32_t devadr, USBDevice *dev, + USBEndpoint *ep, uint32_t index, bool send) +{ + DWC2Packet *p; + uint32_t hcchar = s->hreg1[index]; + uint32_t hctsiz = s->hreg1[index + 4]; + uint32_t hcdma = s->hreg1[index + 5]; + uint32_t chan, epnum, epdir, eptype, mps, pid, pcnt, len, tlen, intr = 0; + uint32_t tpcnt, stsidx, actual = 0; + bool do_intr = false, done = false; + + epnum = get_field(hcchar, HCCHAR_EPNUM); + epdir = get_bit(hcchar, HCCHAR_EPDIR); + eptype = get_field(hcchar, HCCHAR_EPTYPE); + mps = get_field(hcchar, HCCHAR_MPS); + pid = get_field(hctsiz, TSIZ_SC_MC_PID); + pcnt = get_field(hctsiz, TSIZ_PKTCNT); + len = get_field(hctsiz, TSIZ_XFERSIZE); + assert(len <= DWC2_MAX_XFER_SIZE); + chan = index >> 3; + p = &s->packet[chan]; + + trace_usb_dwc2_handle_packet(chan, dev, &p->packet, epnum, types[eptype], + dirs[epdir], mps, len, pcnt); + + if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) { + pid = USB_TOKEN_SETUP; + } else { + pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT; + } + + if (send) { + tlen = len; + if (p->small) { + if (tlen > mps) { + tlen = mps; + } + } + + if (pid != USB_TOKEN_IN) { + trace_usb_dwc2_memory_read(hcdma, tlen); + if (dma_memory_read(&s->dma_as, hcdma, + s->usb_buf[chan], tlen) != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_read failed\n", + __func__); + } + } + + usb_packet_init(&p->packet); + usb_packet_setup(&p->packet, pid, ep, 0, hcdma, + pid != USB_TOKEN_IN, true); + usb_packet_addbuf(&p->packet, s->usb_buf[chan], tlen); + p->async = DWC2_ASYNC_NONE; + usb_handle_packet(dev, &p->packet); + } else { + tlen = p->len; + } + + stsidx = -p->packet.status; + assert(stsidx < sizeof(pstatus) / sizeof(*pstatus)); + actual = p->packet.actual_length; + trace_usb_dwc2_packet_status(pstatus[stsidx], actual); + +babble: + if (p->packet.status != USB_RET_SUCCESS && + p->packet.status != USB_RET_NAK && + p->packet.status != USB_RET_STALL && + p->packet.status != USB_RET_ASYNC) { + trace_usb_dwc2_packet_error(pstatus[stsidx]); + } + + if (p->packet.status == USB_RET_ASYNC) { + trace_usb_dwc2_async_packet(&p->packet, chan, dev, epnum, + dirs[epdir], tlen); + usb_device_flush_ep_queue(dev, ep); + assert(p->async != DWC2_ASYNC_INFLIGHT); + p->devadr = devadr; + p->epnum = epnum; + p->epdir = epdir; + p->mps = mps; + p->pid = pid; + p->index = index; + p->pcnt = pcnt; + p->len = tlen; + p->async = DWC2_ASYNC_INFLIGHT; + p->needs_service = false; + return; + } + + if (p->packet.status == USB_RET_SUCCESS) { + if (actual > tlen) { + p->packet.status = USB_RET_BABBLE; + goto babble; + } + + if (pid == USB_TOKEN_IN) { + trace_usb_dwc2_memory_write(hcdma, actual); + if (dma_memory_write(&s->dma_as, hcdma, s->usb_buf[chan], + actual) != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_write failed\n", + __func__); + } + } + + tpcnt = actual / mps; + if (actual % mps) { + tpcnt++; + if (pid == USB_TOKEN_IN) { + done = true; + } + } + + pcnt -= tpcnt < pcnt ? tpcnt : pcnt; + set_field(&hctsiz, pcnt, TSIZ_PKTCNT); + len -= actual < len ? actual : len; + set_field(&hctsiz, len, TSIZ_XFERSIZE); + s->hreg1[index + 4] = hctsiz; + hcdma += actual; + s->hreg1[index + 5] = hcdma; + + if (!pcnt || len == 0 || actual == 0) { + done = true; + } + } else { + intr |= pintr[stsidx]; + if (p->packet.status == USB_RET_NAK && + (eptype == USB_ENDPOINT_XFER_CONTROL || + eptype == USB_ENDPOINT_XFER_BULK)) { + /* + * for ctrl/bulk, automatically retry on NAK, + * but send the interrupt anyway + */ + intr &= ~HCINTMSK_RESERVED14_31; + s->hreg1[index + 2] |= intr; + do_intr = true; + } else { + intr |= HCINTMSK_CHHLTD; + done = true; + } + } + + usb_packet_cleanup(&p->packet); + + if (done) { + hcchar &= ~HCCHAR_CHENA; + s->hreg1[index] = hcchar; + if (!(intr & HCINTMSK_CHHLTD)) { + intr |= HCINTMSK_CHHLTD | HCINTMSK_XFERCOMPL; + } + intr &= ~HCINTMSK_RESERVED14_31; + s->hreg1[index + 2] |= intr; + p->needs_service = false; + trace_usb_dwc2_packet_done(pstatus[stsidx], actual, len, pcnt); + dwc2_update_hc_irq(s, index); + return; + } + + p->devadr = devadr; + p->epnum = epnum; + p->epdir = epdir; + p->mps = mps; + p->pid = pid; + p->index = index; + p->pcnt = pcnt; + p->len = len; + p->needs_service = true; + trace_usb_dwc2_packet_next(pstatus[stsidx], len, pcnt); + if (do_intr) { + dwc2_update_hc_irq(s, index); + } +} + +/* Attach or detach a device on root hub */ + +static const char *speeds[] = { + "low", "full", "high" +}; + +static void dwc2_attach(USBPort *port) +{ + DWC2State *s = port->opaque; + int hispd = 0; + + trace_usb_dwc2_attach(port); + assert(port->index == 0); + + if (!port->dev || !port->dev->attached) { + return; + } + + assert(port->dev->speed <= USB_SPEED_HIGH); + trace_usb_dwc2_attach_speed(speeds[port->dev->speed]); + s->hprt0 &= ~HPRT0_SPD_MASK; + + switch (port->dev->speed) { + case USB_SPEED_LOW: + s->hprt0 |= HPRT0_SPD_LOW_SPEED << HPRT0_SPD_SHIFT; + break; + case USB_SPEED_FULL: + s->hprt0 |= HPRT0_SPD_FULL_SPEED << HPRT0_SPD_SHIFT; + break; + case USB_SPEED_HIGH: + s->hprt0 |= HPRT0_SPD_HIGH_SPEED << HPRT0_SPD_SHIFT; + hispd = 1; + break; + } + + if (hispd) { + s->usb_frame_time = NANOSECONDS_PER_SECOND / 8000; /* 125000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_HS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_HS; /* 10.4 */ + } else { + s->usb_bit_time = 1; + } + } else { + s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000; /* 1000000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */ + } else { + s->usb_bit_time = 1; + } + } + + s->fi = USB_FRMINTVL - 1; + s->hprt0 |= HPRT0_CONNDET | HPRT0_CONNSTS; + + dwc2_bus_start(s); + dwc2_raise_global_irq(s, GINTSTS_PRTINT); +} + +static void dwc2_detach(USBPort *port) +{ + DWC2State *s = port->opaque; + + trace_usb_dwc2_detach(port); + assert(port->index == 0); + + dwc2_bus_stop(s); + + s->hprt0 &= ~(HPRT0_SPD_MASK | HPRT0_SUSP | HPRT0_ENA | HPRT0_CONNSTS); + s->hprt0 |= HPRT0_CONNDET | HPRT0_ENACHG; + + dwc2_raise_global_irq(s, GINTSTS_PRTINT); +} + +static void dwc2_child_detach(USBPort *port, USBDevice *child) +{ + trace_usb_dwc2_child_detach(port, child); + assert(port->index == 0); +} + +static void dwc2_wakeup(USBPort *port) +{ + DWC2State *s = port->opaque; + + trace_usb_dwc2_wakeup(port); + assert(port->index == 0); + + if (s->hprt0 & HPRT0_SUSP) { + s->hprt0 |= HPRT0_RES; + dwc2_raise_global_irq(s, GINTSTS_PRTINT); + } + + qemu_bh_schedule(s->async_bh); +} + +static void dwc2_async_packet_complete(USBPort *port, USBPacket *packet) +{ + DWC2State *s = port->opaque; + DWC2Packet *p; + USBDevice *dev; + USBEndpoint *ep; + + assert(port->index == 0); + p = container_of(packet, DWC2Packet, packet); + dev = dwc2_find_device(s, p->devadr); + ep = usb_ep_get(dev, p->pid, p->epnum); + trace_usb_dwc2_async_packet_complete(port, packet, p->index >> 3, dev, + p->epnum, dirs[p->epdir], p->len); + assert(p->async == DWC2_ASYNC_INFLIGHT); + + if (packet->status == USB_RET_REMOVE_FROM_QUEUE) { + usb_cancel_packet(packet); + usb_packet_cleanup(packet); + return; + } + + dwc2_handle_packet(s, p->devadr, dev, ep, p->index, false); + + p->async = DWC2_ASYNC_FINISHED; + qemu_bh_schedule(s->async_bh); +} + +static USBPortOps dwc2_port_ops = { + .attach = dwc2_attach, + .detach = dwc2_detach, + .child_detach = dwc2_child_detach, + .wakeup = dwc2_wakeup, + .complete = dwc2_async_packet_complete, +}; + +static uint32_t dwc2_get_frame_remaining(DWC2State *s) +{ + uint32_t fr = 0; + int64_t tks; + + tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - s->sof_time; + if (tks < 0) { + tks = 0; + } + + /* avoid muldiv if possible */ + if (tks >= s->usb_frame_time) { + goto out; + } + if (tks < s->usb_bit_time) { + fr = s->fi; + goto out; + } + + /* tks = number of ns since SOF, divided by 83 (fs) or 10 (hs) */ + tks = tks / s->usb_bit_time; + if (tks >= (int64_t)s->fi) { + goto out; + } + + /* remaining = frame interval minus tks */ + fr = (uint32_t)((int64_t)s->fi - tks); + +out: + return fr; +} + +static void dwc2_work_bh(void *opaque) +{ + DWC2State *s = opaque; + DWC2Packet *p; + USBDevice *dev; + USBEndpoint *ep; + int64_t t_now, expire_time; + int chan; + bool found = false; + + trace_usb_dwc2_work_bh(); + if (s->working) { + return; + } + s->working = true; + + t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + chan = s->next_chan; + + do { + p = &s->packet[chan]; + if (p->needs_service) { + dev = dwc2_find_device(s, p->devadr); + ep = usb_ep_get(dev, p->pid, p->epnum); + trace_usb_dwc2_work_bh_service(s->next_chan, chan, dev, p->epnum); + dwc2_handle_packet(s, p->devadr, dev, ep, p->index, true); + found = true; + } + if (++chan == DWC2_NB_CHAN) { + chan = 0; + } + if (found) { + s->next_chan = chan; + trace_usb_dwc2_work_bh_next(chan); + } + } while (chan != s->next_chan); + + if (found) { + expire_time = t_now + NANOSECONDS_PER_SECOND / 4000; + timer_mod(s->frame_timer, expire_time); + } + s->working = false; +} + +static void dwc2_enable_chan(DWC2State *s, uint32_t index) +{ + USBDevice *dev; + USBEndpoint *ep; + uint32_t hcchar; + uint32_t hctsiz; + uint32_t devadr, epnum, epdir, eptype, pid, len; + DWC2Packet *p; + + assert((index >> 3) < DWC2_NB_CHAN); + p = &s->packet[index >> 3]; + hcchar = s->hreg1[index]; + hctsiz = s->hreg1[index + 4]; + devadr = get_field(hcchar, HCCHAR_DEVADDR); + epnum = get_field(hcchar, HCCHAR_EPNUM); + epdir = get_bit(hcchar, HCCHAR_EPDIR); + eptype = get_field(hcchar, HCCHAR_EPTYPE); + pid = get_field(hctsiz, TSIZ_SC_MC_PID); + len = get_field(hctsiz, TSIZ_XFERSIZE); + + dev = dwc2_find_device(s, devadr); + + trace_usb_dwc2_enable_chan(index >> 3, dev, &p->packet, epnum); + if (dev == NULL) { + return; + } + + if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) { + pid = USB_TOKEN_SETUP; + } else { + pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT; + } + + ep = usb_ep_get(dev, pid, epnum); + + /* + * Hack: Networking doesn't like us delivering large transfers, it kind + * of works but the latency is horrible. So if the transfer is <= the mtu + * size, we take that as a hint that this might be a network transfer, + * and do the transfer packet-by-packet. + */ + if (len > 1536) { + p->small = false; + } else { + p->small = true; + } + + dwc2_handle_packet(s, devadr, dev, ep, index, true); + qemu_bh_schedule(s->async_bh); +} + +static const char *glbregnm[] = { + "GOTGCTL ", "GOTGINT ", "GAHBCFG ", "GUSBCFG ", "GRSTCTL ", + "GINTSTS ", "GINTMSK ", "GRXSTSR ", "GRXSTSP ", "GRXFSIZ ", + "GNPTXFSIZ", "GNPTXSTS ", "GI2CCTL ", "GPVNDCTL ", "GGPIO ", + "GUID ", "GSNPSID ", "GHWCFG1 ", "GHWCFG2 ", "GHWCFG3 ", + "GHWCFG4 ", "GLPMCFG ", "GPWRDN ", "GDFIFOCFG", "GADPCTL ", + "GREFCLK ", "GINTMSK2 ", "GINTSTS2 " +}; + +static uint64_t dwc2_glbreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr <= GINTSTS2); + val = s->glbreg[index]; + + switch (addr) { + case GRSTCTL: + /* clear any self-clearing bits that were set */ + val &= ~(GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | GRSTCTL_IN_TKNQ_FLSH | + GRSTCTL_FRMCNTRRST | GRSTCTL_HSFTRST | GRSTCTL_CSFTRST); + s->glbreg[index] = val; + break; + default: + break; + } + + trace_usb_dwc2_glbreg_read(addr, glbregnm[index], val); + return val; +} + +static void dwc2_glbreg_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + int iflg = 0; + + assert(addr <= GINTSTS2); + mmio = &s->glbreg[index]; + old = *mmio; + + switch (addr) { + case GOTGCTL: + /* don't allow setting of read-only bits */ + val &= ~(GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD | + GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B | + GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS); + /* don't allow clearing of read-only bits */ + val |= old & (GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD | + GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B | + GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS); + break; + case GAHBCFG: + if ((val & GAHBCFG_GLBL_INTR_EN) && !(old & GAHBCFG_GLBL_INTR_EN)) { + iflg = 1; + } + break; + case GRSTCTL: + val |= GRSTCTL_AHBIDLE; + val &= ~GRSTCTL_DMAREQ; + if (!(old & GRSTCTL_TXFFLSH) && (val & GRSTCTL_TXFFLSH)) { + /* TODO - TX fifo flush */ + qemu_log_mask(LOG_UNIMP, "Tx FIFO flush not implemented\n"); + } + if (!(old & GRSTCTL_RXFFLSH) && (val & GRSTCTL_RXFFLSH)) { + /* TODO - RX fifo flush */ + qemu_log_mask(LOG_UNIMP, "Rx FIFO flush not implemented\n"); + } + if (!(old & GRSTCTL_IN_TKNQ_FLSH) && (val & GRSTCTL_IN_TKNQ_FLSH)) { + /* TODO - device IN token queue flush */ + qemu_log_mask(LOG_UNIMP, "Token queue flush not implemented\n"); + } + if (!(old & GRSTCTL_FRMCNTRRST) && (val & GRSTCTL_FRMCNTRRST)) { + /* TODO - host frame counter reset */ + qemu_log_mask(LOG_UNIMP, "Frame counter reset not implemented\n"); + } + if (!(old & GRSTCTL_HSFTRST) && (val & GRSTCTL_HSFTRST)) { + /* TODO - host soft reset */ + qemu_log_mask(LOG_UNIMP, "Host soft reset not implemented\n"); + } + if (!(old & GRSTCTL_CSFTRST) && (val & GRSTCTL_CSFTRST)) { + /* TODO - core soft reset */ + qemu_log_mask(LOG_UNIMP, "Core soft reset not implemented\n"); + } + /* don't allow clearing of self-clearing bits */ + val |= old & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | + GRSTCTL_IN_TKNQ_FLSH | GRSTCTL_FRMCNTRRST | + GRSTCTL_HSFTRST | GRSTCTL_CSFTRST); + break; + case GINTSTS: + /* clear the write-1-to-clear bits */ + val |= ~old; + val = ~val; + /* don't allow clearing of read-only bits */ + val |= old & (GINTSTS_PTXFEMP | GINTSTS_HCHINT | GINTSTS_PRTINT | + GINTSTS_OEPINT | GINTSTS_IEPINT | GINTSTS_GOUTNAKEFF | + GINTSTS_GINNAKEFF | GINTSTS_NPTXFEMP | GINTSTS_RXFLVL | + GINTSTS_OTGINT | GINTSTS_CURMODE_HOST); + iflg = 1; + break; + case GINTMSK: + iflg = 1; + break; + default: + break; + } + + trace_usb_dwc2_glbreg_write(addr, glbregnm[index], orig, old, val); + *mmio = val; + + if (iflg) { + dwc2_update_irq(s); + } +} + +static uint64_t dwc2_fszreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr == HPTXFSIZ); + val = s->fszreg[index]; + + trace_usb_dwc2_fszreg_read(addr, val); + return val; +} + +static void dwc2_fszreg_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + + assert(addr == HPTXFSIZ); + mmio = &s->fszreg[index]; + old = *mmio; + + trace_usb_dwc2_fszreg_write(addr, orig, old, val); + *mmio = val; +} + +static const char *hreg0nm[] = { + "HCFG ", "HFIR ", "HFNUM ", "<rsvd> ", "HPTXSTS ", + "HAINT ", "HAINTMSK ", "HFLBADDR ", "<rsvd> ", "<rsvd> ", + "<rsvd> ", "<rsvd> ", "<rsvd> ", "<rsvd> ", "<rsvd> ", + "<rsvd> ", "HPRT0 " +}; + +static uint64_t dwc2_hreg0_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= HCFG && addr <= HPRT0); + val = s->hreg0[index]; + + switch (addr) { + case HFNUM: + val = (dwc2_get_frame_remaining(s) << HFNUM_FRREM_SHIFT) | + (s->hfnum << HFNUM_FRNUM_SHIFT); + break; + default: + break; + } + + trace_usb_dwc2_hreg0_read(addr, hreg0nm[index], val); + return val; +} + +static void dwc2_hreg0_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + USBDevice *dev = s->uport.dev; + uint64_t orig = val; + uint32_t *mmio; + uint32_t tval, told, old; + int prst = 0; + int iflg = 0; + + assert(addr >= HCFG && addr <= HPRT0); + mmio = &s->hreg0[index]; + old = *mmio; + + switch (addr) { + case HFIR: + break; + case HFNUM: + case HPTXSTS: + case HAINT: + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n", + __func__); + return; + case HAINTMSK: + val &= 0xffff; + break; + case HPRT0: + /* don't allow clearing of read-only bits */ + val |= old & (HPRT0_SPD_MASK | HPRT0_LNSTS_MASK | HPRT0_OVRCURRACT | + HPRT0_CONNSTS); + /* don't allow clearing of self-clearing bits */ + val |= old & (HPRT0_SUSP | HPRT0_RES); + /* don't allow setting of self-setting bits */ + if (!(old & HPRT0_ENA) && (val & HPRT0_ENA)) { + val &= ~HPRT0_ENA; + } + /* clear the write-1-to-clear bits */ + tval = val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + told = old & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + tval |= ~told; + tval = ~tval; + tval &= (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + val &= ~(HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | + HPRT0_CONNDET); + val |= tval; + if (!(val & HPRT0_RST) && (old & HPRT0_RST)) { + if (dev && dev->attached) { + val |= HPRT0_ENA | HPRT0_ENACHG; + prst = 1; + } + } + if (val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_CONNDET)) { + iflg = 1; + } else { + iflg = -1; + } + break; + default: + break; + } + + if (prst) { + trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, + val & ~HPRT0_CONNDET); + trace_usb_dwc2_hreg0_action("call usb_port_reset"); + usb_port_reset(&s->uport); + val &= ~HPRT0_CONNDET; + } else { + trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, val); + } + + *mmio = val; + + if (iflg > 0) { + trace_usb_dwc2_hreg0_action("enable PRTINT"); + dwc2_raise_global_irq(s, GINTSTS_PRTINT); + } else if (iflg < 0) { + trace_usb_dwc2_hreg0_action("disable PRTINT"); + dwc2_lower_global_irq(s, GINTSTS_PRTINT); + } +} + +static const char *hreg1nm[] = { + "HCCHAR ", "HCSPLT ", "HCINT ", "HCINTMSK", "HCTSIZ ", "HCDMA ", + "<rsvd> ", "HCDMAB " +}; + +static uint64_t dwc2_hreg1_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1)); + val = s->hreg1[index]; + + trace_usb_dwc2_hreg1_read(addr, hreg1nm[index & 7], addr >> 5, val); + return val; +} + +static void dwc2_hreg1_write(void *ptr, hwaddr addr, int index, uint64_t val, + unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + int iflg = 0; + int enflg = 0; + int disflg = 0; + + assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1)); + mmio = &s->hreg1[index]; + old = *mmio; + + switch (HSOTG_REG(0x500) + (addr & 0x1c)) { + case HCCHAR(0): + if ((val & HCCHAR_CHDIS) && !(old & HCCHAR_CHDIS)) { + val &= ~(HCCHAR_CHENA | HCCHAR_CHDIS); + disflg = 1; + } else { + val |= old & HCCHAR_CHDIS; + if ((val & HCCHAR_CHENA) && !(old & HCCHAR_CHENA)) { + val &= ~HCCHAR_CHDIS; + enflg = 1; + } else { + val |= old & HCCHAR_CHENA; + } + } + break; + case HCINT(0): + /* clear the write-1-to-clear bits */ + val |= ~old; + val = ~val; + val &= ~HCINTMSK_RESERVED14_31; + iflg = 1; + break; + case HCINTMSK(0): + val &= ~HCINTMSK_RESERVED14_31; + iflg = 1; + break; + case HCDMAB(0): + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n", + __func__); + return; + default: + break; + } + + trace_usb_dwc2_hreg1_write(addr, hreg1nm[index & 7], index >> 3, orig, + old, val); + *mmio = val; + + if (disflg) { + /* set ChHltd in HCINT */ + s->hreg1[(index & ~7) + 2] |= HCINTMSK_CHHLTD; + iflg = 1; + } + + if (enflg) { + dwc2_enable_chan(s, index & ~7); + } + + if (iflg) { + dwc2_update_hc_irq(s, index & ~7); + } +} + +static const char *pcgregnm[] = { + "PCGCTL ", "PCGCCTL1 " +}; + +static uint64_t dwc2_pcgreg_read(void *ptr, hwaddr addr, int index, + unsigned size) +{ + DWC2State *s = ptr; + uint32_t val; + + assert(addr >= PCGCTL && addr <= PCGCCTL1); + val = s->pcgreg[index]; + + trace_usb_dwc2_pcgreg_read(addr, pcgregnm[index], val); + return val; +} + +static void dwc2_pcgreg_write(void *ptr, hwaddr addr, int index, + uint64_t val, unsigned size) +{ + DWC2State *s = ptr; + uint64_t orig = val; + uint32_t *mmio; + uint32_t old; + + assert(addr >= PCGCTL && addr <= PCGCCTL1); + mmio = &s->pcgreg[index]; + old = *mmio; + + trace_usb_dwc2_pcgreg_write(addr, pcgregnm[index], orig, old, val); + *mmio = val; +} + +static uint64_t dwc2_hsotg_read(void *ptr, hwaddr addr, unsigned size) +{ + uint64_t val; + + switch (addr) { + case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc): + val = dwc2_glbreg_read(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, size); + break; + case HSOTG_REG(0x100): + val = dwc2_fszreg_read(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, size); + break; + case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc): + /* Gadget-mode registers, just return 0 for now */ + val = 0; + break; + case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc): + val = dwc2_hreg0_read(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, size); + break; + case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc): + val = dwc2_hreg1_read(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, size); + break; + case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc): + /* Gadget-mode registers, just return 0 for now */ + val = 0; + break; + case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc): + val = dwc2_pcgreg_read(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, size); + break; + default: + g_assert_not_reached(); + } + + return val; +} + +static void dwc2_hsotg_write(void *ptr, hwaddr addr, uint64_t val, + unsigned size) +{ + switch (addr) { + case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc): + dwc2_glbreg_write(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, val, size); + break; + case HSOTG_REG(0x100): + dwc2_fszreg_write(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, val, size); + break; + case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc): + /* Gadget-mode registers, do nothing for now */ + break; + case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc): + dwc2_hreg0_write(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, val, size); + break; + case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc): + dwc2_hreg1_write(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, val, size); + break; + case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc): + /* Gadget-mode registers, do nothing for now */ + break; + case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc): + dwc2_pcgreg_write(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, val, size); + break; + default: + g_assert_not_reached(); + } +} + +static const MemoryRegionOps dwc2_mmio_hsotg_ops = { + .read = dwc2_hsotg_read, + .write = dwc2_hsotg_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static uint64_t dwc2_hreg2_read(void *ptr, hwaddr addr, unsigned size) +{ + /* TODO - implement FIFOs to support slave mode */ + trace_usb_dwc2_hreg2_read(addr, addr >> 12, 0); + qemu_log_mask(LOG_UNIMP, "FIFO read not implemented\n"); + return 0; +} + +static void dwc2_hreg2_write(void *ptr, hwaddr addr, uint64_t val, + unsigned size) +{ + uint64_t orig = val; + + /* TODO - implement FIFOs to support slave mode */ + trace_usb_dwc2_hreg2_write(addr, addr >> 12, orig, 0, val); + qemu_log_mask(LOG_UNIMP, "FIFO write not implemented\n"); +} + +static const MemoryRegionOps dwc2_mmio_hreg2_ops = { + .read = dwc2_hreg2_read, + .write = dwc2_hreg2_write, + .impl.min_access_size = 4, + .impl.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void dwc2_wakeup_endpoint(USBBus *bus, USBEndpoint *ep, + unsigned int stream) +{ + DWC2State *s = container_of(bus, DWC2State, bus); + + trace_usb_dwc2_wakeup_endpoint(ep, stream); + + /* TODO - do something here? */ + qemu_bh_schedule(s->async_bh); +} + +static USBBusOps dwc2_bus_ops = { + .wakeup_endpoint = dwc2_wakeup_endpoint, +}; + +static void dwc2_work_timer(void *opaque) +{ + DWC2State *s = opaque; + + trace_usb_dwc2_work_timer(); + qemu_bh_schedule(s->async_bh); +} + +static void dwc2_reset_enter(Object *obj, ResetType type) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + int i; + + trace_usb_dwc2_reset_enter(); + + if (c->parent_phases.enter) { + c->parent_phases.enter(obj, type); + } + + timer_del(s->frame_timer); + qemu_bh_cancel(s->async_bh); + + if (s->uport.dev && s->uport.dev->attached) { + usb_detach(&s->uport); + } + + dwc2_bus_stop(s); + + s->gotgctl = GOTGCTL_BSESVLD | GOTGCTL_ASESVLD | GOTGCTL_CONID_B; + s->gotgint = 0; + s->gahbcfg = 0; + s->gusbcfg = 5 << GUSBCFG_USBTRDTIM_SHIFT; + s->grstctl = GRSTCTL_AHBIDLE; + s->gintsts = GINTSTS_CONIDSTSCHNG | GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | + GINTSTS_CURMODE_HOST; + s->gintmsk = 0; + s->grxstsr = 0; + s->grxstsp = 0; + s->grxfsiz = 1024; + s->gnptxfsiz = 1024 << FIFOSIZE_DEPTH_SHIFT; + s->gnptxsts = (4 << FIFOSIZE_DEPTH_SHIFT) | 1024; + s->gi2cctl = GI2CCTL_I2CDATSE0 | GI2CCTL_ACK; + s->gpvndctl = 0; + s->ggpio = 0; + s->guid = 0; + s->gsnpsid = 0x4f54294a; + s->ghwcfg1 = 0; + s->ghwcfg2 = (8 << GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT) | + (4 << GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT) | + (4 << GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT) | + GHWCFG2_DYNAMIC_FIFO | + GHWCFG2_PERIO_EP_SUPPORTED | + ((DWC2_NB_CHAN - 1) << GHWCFG2_NUM_HOST_CHAN_SHIFT) | + (GHWCFG2_INT_DMA_ARCH << GHWCFG2_ARCHITECTURE_SHIFT) | + (GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST << GHWCFG2_OP_MODE_SHIFT); + s->ghwcfg3 = (4096 << GHWCFG3_DFIFO_DEPTH_SHIFT) | + (4 << GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT) | + (4 << GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT); + s->ghwcfg4 = 0; + s->glpmcfg = 0; + s->gpwrdn = GPWRDN_PWRDNRSTN; + s->gdfifocfg = 0; + s->gadpctl = 0; + s->grefclk = 0; + s->gintmsk2 = 0; + s->gintsts2 = 0; + + s->hptxfsiz = 500 << FIFOSIZE_DEPTH_SHIFT; + + s->hcfg = 2 << HCFG_RESVALID_SHIFT; + s->hfir = 60000; + s->hfnum = 0x3fff; + s->hptxsts = (16 << TXSTS_QSPCAVAIL_SHIFT) | 32768; + s->haint = 0; + s->haintmsk = 0; + s->hprt0 = 0; + + memset(s->hreg1, 0, sizeof(s->hreg1)); + memset(s->pcgreg, 0, sizeof(s->pcgreg)); + + s->sof_time = 0; + s->frame_number = 0; + s->fi = USB_FRMINTVL - 1; + s->next_chan = 0; + s->working = false; + + for (i = 0; i < DWC2_NB_CHAN; i++) { + s->packet[i].needs_service = false; + } +} + +static void dwc2_reset_hold(Object *obj) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + + trace_usb_dwc2_reset_hold(); + + if (c->parent_phases.hold) { + c->parent_phases.hold(obj); + } + + dwc2_update_irq(s); +} + +static void dwc2_reset_exit(Object *obj) +{ + DWC2Class *c = DWC2_GET_CLASS(obj); + DWC2State *s = DWC2_USB(obj); + + trace_usb_dwc2_reset_exit(); + + if (c->parent_phases.exit) { + c->parent_phases.exit(obj); + } + + s->hprt0 = HPRT0_PWR; + if (s->uport.dev && s->uport.dev->attached) { + usb_attach(&s->uport); + usb_device_reset(s->uport.dev); + } +} + +static void dwc2_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + DWC2State *s = DWC2_USB(dev); + Object *obj; + Error *err = NULL; + + obj = object_property_get_link(OBJECT(dev), "dma-mr", &err); + if (err) { + error_setg(errp, "dwc2: required dma-mr link not found: %s", + error_get_pretty(err)); + return; + } + assert(obj != NULL); + + s->dma_mr = MEMORY_REGION(obj); + address_space_init(&s->dma_as, s->dma_mr, "dwc2"); + + usb_bus_new(&s->bus, sizeof(s->bus), &dwc2_bus_ops, dev); + usb_register_port(&s->bus, &s->uport, s, 0, &dwc2_port_ops, + USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL | + (s->usb_version == 2 ? USB_SPEED_MASK_HIGH : 0)); + s->uport.dev = 0; + + s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000; /* 1000000 */ + if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) { + s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */ + } else { + s->usb_bit_time = 1; + } + + s->fi = USB_FRMINTVL - 1; + s->eof_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_frame_boundary, s); + s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_work_timer, s); + s->async_bh = qemu_bh_new(dwc2_work_bh, s); + + sysbus_init_irq(sbd, &s->irq); +} + +static void dwc2_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + DWC2State *s = DWC2_USB(obj); + + memory_region_init(&s->container, obj, "dwc2", DWC2_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->container); + + memory_region_init_io(&s->hsotg, obj, &dwc2_mmio_hsotg_ops, s, + "dwc2-io", 4 * KiB); + memory_region_add_subregion(&s->container, 0x0000, &s->hsotg); + + memory_region_init_io(&s->fifos, obj, &dwc2_mmio_hreg2_ops, s, + "dwc2-fifo", 64 * KiB); + memory_region_add_subregion(&s->container, 0x1000, &s->fifos); +} + +static const VMStateDescription vmstate_dwc2_state_packet = { + .name = "dwc2/packet", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(devadr, DWC2Packet), + VMSTATE_UINT32(epnum, DWC2Packet), + VMSTATE_UINT32(epdir, DWC2Packet), + VMSTATE_UINT32(mps, DWC2Packet), + VMSTATE_UINT32(pid, DWC2Packet), + VMSTATE_UINT32(index, DWC2Packet), + VMSTATE_UINT32(pcnt, DWC2Packet), + VMSTATE_UINT32(len, DWC2Packet), + VMSTATE_INT32(async, DWC2Packet), + VMSTATE_BOOL(small, DWC2Packet), + VMSTATE_BOOL(needs_service, DWC2Packet), + VMSTATE_END_OF_LIST() + }, +}; + +const VMStateDescription vmstate_dwc2_state = { + .name = "dwc2", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(glbreg, DWC2State, + DWC2_GLBREG_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(fszreg, DWC2State, + DWC2_FSZREG_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(hreg0, DWC2State, + DWC2_HREG0_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(hreg1, DWC2State, + DWC2_HREG1_SIZE / sizeof(uint32_t)), + VMSTATE_UINT32_ARRAY(pcgreg, DWC2State, + DWC2_PCGREG_SIZE / sizeof(uint32_t)), + + VMSTATE_TIMER_PTR(eof_timer, DWC2State), + VMSTATE_TIMER_PTR(frame_timer, DWC2State), + VMSTATE_INT64(sof_time, DWC2State), + VMSTATE_INT64(usb_frame_time, DWC2State), + VMSTATE_INT64(usb_bit_time, DWC2State), + VMSTATE_UINT32(usb_version, DWC2State), + VMSTATE_UINT16(frame_number, DWC2State), + VMSTATE_UINT16(fi, DWC2State), + VMSTATE_UINT16(next_chan, DWC2State), + VMSTATE_BOOL(working, DWC2State), + + VMSTATE_STRUCT_ARRAY(packet, DWC2State, DWC2_NB_CHAN, 1, + vmstate_dwc2_state_packet, DWC2Packet), + VMSTATE_UINT8_2DARRAY(usb_buf, DWC2State, DWC2_NB_CHAN, + DWC2_MAX_XFER_SIZE), + + VMSTATE_END_OF_LIST() + } +}; + +static Property dwc2_usb_properties[] = { + DEFINE_PROP_UINT32("usb_version", DWC2State, usb_version, 2), + DEFINE_PROP_END_OF_LIST(), +}; + +static void dwc2_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + DWC2Class *c = DWC2_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->realize = dwc2_realize; + dc->vmsd = &vmstate_dwc2_state; + set_bit(DEVICE_CATEGORY_USB, dc->categories); + device_class_set_props(dc, dwc2_usb_properties); + resettable_class_set_parent_phases(rc, dwc2_reset_enter, dwc2_reset_hold, + dwc2_reset_exit, &c->parent_phases); +} + +static const TypeInfo dwc2_usb_type_info = { + .name = TYPE_DWC2_USB, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(DWC2State), + .instance_init = dwc2_init, + .class_size = sizeof(DWC2Class), + .class_init = dwc2_class_init, +}; + +static void dwc2_usb_register_types(void) +{ + type_register_static(&dwc2_usb_type_info); +} + +type_init(dwc2_usb_register_types) diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Kconfig +++ b/hw/usb/Kconfig @@ -XXX,XX +XXX,XX @@ config USB_MUSB bool select USB +config USB_DWC2 + bool + default y + select USB + config TUSB6010 bool select USB_MUSB diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Makefile.objs +++ b/hw/usb/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_USB_EHCI_SYSBUS) += hcd-ehci-sysbus.o common-obj-$(CONFIG_USB_XHCI) += hcd-xhci.o common-obj-$(CONFIG_USB_XHCI_NEC) += hcd-xhci-nec.o common-obj-$(CONFIG_USB_MUSB) += hcd-musb.o +common-obj-$(CONFIG_USB_DWC2) += hcd-dwc2.o common-obj-$(CONFIG_TUSB6010) += tusb6010.o common-obj-$(CONFIG_IMX) += chipidea.o diff --git a/hw/usb/trace-events b/hw/usb/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/trace-events +++ b/hw/usb/trace-events @@ -XXX,XX +XXX,XX @@ usb_xhci_xfer_error(void *xfer, uint32_t ret) "%p: ret %d" usb_xhci_unimplemented(const char *item, int nr) "%s (0x%x)" usb_xhci_enforced_limit(const char *item) "%s" +# hcd-dwc2.c +usb_dwc2_update_irq(uint32_t level) "level=%d" +usb_dwc2_raise_global_irq(uint32_t intr) "0x%08x" +usb_dwc2_lower_global_irq(uint32_t intr) "0x%08x" +usb_dwc2_raise_host_irq(uint32_t intr) "0x%04x" +usb_dwc2_lower_host_irq(uint32_t intr) "0x%04x" +usb_dwc2_sof(int64_t next) "next SOF %" PRId64 +usb_dwc2_bus_start(void) "start SOFs" +usb_dwc2_bus_stop(void) "stop SOFs" +usb_dwc2_find_device(uint8_t addr) "%d" +usb_dwc2_port_disabled(uint32_t pnum) "port %d disabled" +usb_dwc2_device_found(uint32_t pnum) "device found on port %d" +usb_dwc2_device_not_found(void) "device not found" +usb_dwc2_handle_packet(uint32_t chan, void *dev, void *pkt, uint32_t ep, const char *type, const char *dir, uint32_t mps, uint32_t len, uint32_t pcnt) "ch %d dev %p pkt %p ep %d type %s dir %s mps %d len %d pcnt %d" +usb_dwc2_memory_read(uint32_t addr, uint32_t len) "addr %d len %d" +usb_dwc2_packet_status(const char *status, uint32_t len) "status %s len %d" +usb_dwc2_packet_error(const char *status) "ERROR %s" +usb_dwc2_async_packet(void *pkt, uint32_t chan, void *dev, uint32_t ep, const char *dir, uint32_t len) "pkt %p ch %d dev %p ep %d %s len %d" +usb_dwc2_memory_write(uint32_t addr, uint32_t len) "addr %d len %d" +usb_dwc2_packet_done(const char *status, uint32_t actual, uint32_t len, uint32_t pcnt) "status %s actual %d len %d pcnt %d" +usb_dwc2_packet_next(const char *status, uint32_t len, uint32_t pcnt) "status %s len %d pcnt %d" +usb_dwc2_attach(void *port) "port %p" +usb_dwc2_attach_speed(const char *speed) "%s-speed device attached" +usb_dwc2_detach(void *port) "port %p" +usb_dwc2_child_detach(void *port, void *child) "port %p child %p" +usb_dwc2_wakeup(void *port) "port %p" +usb_dwc2_async_packet_complete(void *port, void *pkt, uint32_t chan, void *dev, uint32_t ep, const char *dir, uint32_t len) "port %p packet %p ch %d dev %p ep %d %s len %d" +usb_dwc2_work_bh(void) "" +usb_dwc2_work_bh_service(uint32_t first, uint32_t current, void *dev, uint32_t ep) "first %d servicing %d dev %p ep %d" +usb_dwc2_work_bh_next(uint32_t chan) "next %d" +usb_dwc2_enable_chan(uint32_t chan, void *dev, void *pkt, uint32_t ep) "ch %d dev %p pkt %p ep %d" +usb_dwc2_glbreg_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_glbreg_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_fszreg_read(uint64_t addr, uint32_t val) " 0x%04" PRIx64 " HPTXFSIZ val 0x%08x" +usb_dwc2_fszreg_write(uint64_t addr, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " HPTXFSIZ val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg0_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_hreg0_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg1_read(uint64_t addr, const char *reg, uint64_t chan, uint32_t val) " 0x%04" PRIx64 " %s%" PRId64 " val 0x%08x" +usb_dwc2_hreg1_write(uint64_t addr, const char *reg, uint64_t chan, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " %s%" PRId64 " val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_pcgreg_read(uint64_t addr, const char *reg, uint32_t val) " 0x%04" PRIx64 " %s val 0x%08x" +usb_dwc2_pcgreg_write(uint64_t addr, const char *reg, uint64_t val, uint32_t old, uint64_t result) "0x%04" PRIx64 " %s val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg2_read(uint64_t addr, uint64_t fifo, uint32_t val) " 0x%04" PRIx64 " FIFO%" PRId64 " val 0x%08x" +usb_dwc2_hreg2_write(uint64_t addr, uint64_t fifo, uint64_t val, uint32_t old, uint64_t result) " 0x%04" PRIx64 " FIFO%" PRId64 " val 0x%08" PRIx64 " old 0x%08x result 0x%08" PRIx64 +usb_dwc2_hreg0_action(const char *s) "%s" +usb_dwc2_wakeup_endpoint(void *ep, uint32_t stream) "endp %p stream %d" +usb_dwc2_work_timer(void) "" +usb_dwc2_reset_enter(void) "=== RESET enter ===" +usb_dwc2_reset_hold(void) "=== RESET hold ===" +usb_dwc2_reset_exit(void) "=== RESET exit ===" + # desc.c usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d" usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d" -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> The dwc-hsotg (dwc2) USB host depends on a short packet to indicate the end of an IN transfer. The usb-storage driver currently doesn't provide this, so fix it. I have tested this change rather extensively using a PC emulation with xhci, ehci, and uhci controllers, and have not observed any regressions. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-6-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/dev-storage.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/usb/dev-storage.c b/hw/usb/dev-storage.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/dev-storage.c +++ b/hw/usb/dev-storage.c @@ -XXX,XX +XXX,XX @@ static void usb_msd_copy_data(MSDState *s, USBPacket *p) usb_packet_copy(p, scsi_req_get_buf(s->req) + s->scsi_off, len); s->scsi_len -= len; s->scsi_off += len; + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->scsi_len == 0 || s->data_len == 0) { scsi_req_continue(s->req); @@ -XXX,XX +XXX,XX @@ static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t r if (s->data_len) { int len = (p->iov.size - p->actual_length); usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; } if (s->data_len == 0) { @@ -XXX,XX +XXX,XX @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p) int len = p->iov.size - p->actual_length; if (len) { usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->data_len == 0) { s->mode = USB_MSDM_CSW; @@ -XXX,XX +XXX,XX @@ static void usb_msd_handle_data(USBDevice *dev, USBPacket *p) int len = p->iov.size - p->actual_length; if (len) { usb_packet_skip(p, len); + if (len > s->data_len) { + len = s->data_len; + } s->data_len -= len; if (s->data_len == 0) { s->mode = USB_MSDM_CSW; } } } - if (p->actual_length < p->iov.size) { + if (p->actual_length < p->iov.size && (p->short_not_ok || + s->scsi_len >= p->ep->max_packet_size)) { DPRINTF("Deferring packet %p [wait data-in]\n", p); s->packet = p; p->status = USB_RET_ASYNC; -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Wire the dwc-hsotg (dwc2) emulation into Qemu Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org> Message-id: 20200520235349.21215-7-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 3 ++- hw/arm/bcm2835_peripherals.c | 21 ++++++++++++++++++++- 2 files changed, 22 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/bcm2835_sdhost.h" #include "hw/gpio/bcm2835_gpio.h" #include "hw/timer/bcm2835_systmr.h" +#include "hw/usb/hcd-dwc2.h" #include "hw/misc/unimp.h" #define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals" @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { UnimplementedDeviceState ave0; UnimplementedDeviceState bscsl; UnimplementedDeviceState smi; - UnimplementedDeviceState dwc2; + DWC2State dwc2; UnimplementedDeviceState sdramc; } BCM2835PeripheralState; diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) /* Mphi */ sysbus_init_child_obj(obj, "mphi", &s->mphi, sizeof(s->mphi), TYPE_BCM2835_MPHI); + + /* DWC2 */ + sysbus_init_child_obj(obj, "dwc2", &s->dwc2, sizeof(s->dwc2), + TYPE_DWC2_USB); + + object_property_add_const_link(OBJECT(&s->dwc2), "dma-mr", + OBJECT(&s->gpu_bus_mr)); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, INTERRUPT_HOSTPORT)); + /* DWC2 */ + object_property_set_bool(OBJECT(&s->dwc2), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, USB_OTG_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dwc2), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->dwc2), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_USB)); + create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) create_unimp(s, &s->otp, "bcm2835-otp", OTP_OFFSET, 0x80); create_unimp(s, &s->dbus, "bcm2835-dbus", DBUS_OFFSET, 0x8000); create_unimp(s, &s->ave0, "bcm2835-ave0", AVE0_OFFSET, 0x8000); - create_unimp(s, &s->dwc2, "dwc-usb2", USB_OTG_OFFSET, 0x1000); create_unimp(s, &s->sdramc, "bcm2835-sdramc", SDRAMC_OFFSET, 0x100); } -- 2.20.1 From: Paul Zimmerman <pauldzim@gmail.com> Add a check for functional dwc-hsotg (dwc2) USB host emulation to the Raspi 2 acceptance test Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org> Message-id: 20200520235349.21215-8-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(LinuxKernelTest): self.vm.set_console() kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + - serial_kernel_cmdline[uart_id]) + serial_kernel_cmdline[uart_id] + + ' root=/dev/mmcblk0p2 rootwait ' + + 'dwc_otg.fiq_fsm_enable=0') self.vm.add_args('-kernel', kernel_path, '-dtb', dtb_path, - '-append', kernel_command_line) + '-append', kernel_command_line, + '-device', 'usb-kbd') self.vm.launch() console_pattern = 'Kernel command line: %s' % kernel_command_line self.wait_for_console_pattern(console_pattern) + console_pattern = 'Product: QEMU USB Keyboard' + self.wait_for_console_pattern(console_pattern) def test_arm_raspi2_uart0(self): """ -- 2.20.1 Convert the VSHL and VSLI insns from the Neon 2-registers-and-a-shift group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-2-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 25 ++++++++++++++++++++++ target/arm/translate-neon.inc.c | 38 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 18 +++++++--------- 3 files changed, 71 insertions(+), 10 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VRECPS_fp_3s 1111 001 0 0 . 0 . .... .... 1111 ... 1 .... @3same_fp VRSQRTS_fp_3s 1111 001 0 0 . 1 . .... .... 1111 ... 1 .... @3same_fp VMAXNM_fp_3s 1111 001 1 0 . 0 . .... .... 1111 ... 1 .... @3same_fp VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp + +###################################################################### +# 2-reg-and-shift grouping: +# 1111 001 U 1 D immH:3 immL:3 Vd:4 opc:4 L Q M 1 Vm:4 +###################################################################### +&2reg_shift vm vd q shift size + +@2reg_shl_d .... ... . . . shift:6 .... .... 1 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 +@2reg_shl_s .... ... . . . 1 shift:5 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 +@2reg_shl_h .... ... . . . 01 shift:4 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 +@2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 + +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h +VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b + +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h +VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_3same_fp_pair(DisasContext *s, arg_3same *a, VFPGen3OpSPFn *fn) DO_3S_FP_PAIR(VPADD, gen_helper_vfp_adds) DO_3S_FP_PAIR(VPMAX, gen_helper_vfp_maxs) DO_3S_FP_PAIR(VPMIN, gen_helper_vfp_mins) + +static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) +{ + /* Handle a 2-reg-shift insn which can be vectorized. */ + int vec_size = a->q ? 16 : 8; + int rd_ofs = neon_reg_offset(a->vd, 0); + int rm_ofs = neon_reg_offset(a->vm, 0); + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fn(a->size, rd_ofs, rm_ofs, a->shift, vec_size, vec_size); + return true; +} + +#define DO_2SH(INSN, FUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_vector_2sh(s, a, FUNC); \ + } \ + +DO_2SH(VSHL, tcg_gen_gvec_shli) +DO_2SH(VSLI, gen_gvec_sli) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if ((insn & 0x00380080) != 0) { /* Two registers and shift. */ op = (insn >> 8) & 0xf; + + switch (op) { + case 5: /* VSHL, VSLI */ + return 1; /* handled by decodetree */ + default: + break; + } + if (insn & (1 << 7)) { /* 64-bit shift. */ if (op > 7) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) gen_gvec_sri(size, rd_ofs, rm_ofs, shift, vec_size, vec_size); return 0; - - case 5: /* VSHL, VSLI */ - if (u) { /* VSLI */ - gen_gvec_sli(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { /* VSHL */ - tcg_gen_gvec_shli(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; } if (size == 3) { -- 2.20.1 Convert the VSHR 2-reg-shift insns to decodetree. Note that unlike the legacy decoder, we present the right shift amount to the trans_ function as a positive integer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-3-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 25 ++++++++++++++++++++ target/arm/translate-neon.inc.c | 41 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 21 +---------------- 3 files changed, 67 insertions(+), 20 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp ###################################################################### &2reg_shift vm vd q shift size +# Right shifts are encoded as N - shift, where N is the element size in bits. +%neon_rshift_i6 16:6 !function=rsub_64 +%neon_rshift_i5 16:5 !function=rsub_32 +%neon_rshift_i4 16:4 !function=rsub_16 +%neon_rshift_i3 16:3 !function=rsub_8 + +@2reg_shr_d .... ... . . . ...... .... .... 1 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 shift=%neon_rshift_i6 +@2reg_shr_s .... ... . . . 1 ..... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 shift=%neon_rshift_i5 +@2reg_shr_h .... ... . . . 01 .... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 shift=%neon_rshift_i4 +@2reg_shr_b .... ... . . . 001 ... .... .... 0 q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 shift=%neon_rshift_i3 + @2reg_shl_d .... ... . . . shift:6 .... .... 1 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=3 @2reg_shl_s .... ... . . . 1 shift:5 .... .... 0 q:1 . . .... \ @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h +VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b + +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h +VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b + VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static inline int plus1(DisasContext *s, int x) return x + 1; } +static inline int rsub_64(DisasContext *s, int x) +{ + return 64 - x; +} + +static inline int rsub_32(DisasContext *s, int x) +{ + return 32 - x; +} +static inline int rsub_16(DisasContext *s, int x) +{ + return 16 - x; +} +static inline int rsub_8(DisasContext *s, int x) +{ + return 8 - x; +} + /* Include the generated Neon decoder */ #include "decode-neon-dp.inc.c" #include "decode-neon-ls.inc.c" @@ -XXX,XX +XXX,XX @@ static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) DO_2SH(VSHL, tcg_gen_gvec_shli) DO_2SH(VSLI, gen_gvec_sli) + +static bool trans_VSHR_S_2sh(DisasContext *s, arg_2reg_shift *a) +{ + /* Signed shift out of range results in all-sign-bits */ + a->shift = MIN(a->shift, (8 << a->size) - 1); + return do_vector_2sh(s, a, tcg_gen_gvec_sari); +} + +static void gen_zero_rd_2sh(unsigned vece, uint32_t rd_ofs, uint32_t rm_ofs, + int64_t shift, uint32_t oprsz, uint32_t maxsz) +{ + tcg_gen_gvec_dup_imm(vece, rd_ofs, oprsz, maxsz, 0); +} + +static bool trans_VSHR_U_2sh(DisasContext *s, arg_2reg_shift *a) +{ + /* Shift out of range is architecturally valid and results in zero. */ + if (a->shift >= (8 << a->size)) { + return do_vector_2sh(s, a, gen_zero_rd_2sh); + } else { + return do_vector_2sh(s, a, tcg_gen_gvec_shri); + } +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) op = (insn >> 8) & 0xf; switch (op) { + case 0: /* VSHR */ case 5: /* VSHL, VSLI */ return 1; /* handled by decodetree */ default: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } switch (op) { - case 0: /* VSHR */ - /* Right shift comes here negative. */ - shift = -shift; - /* Shifts larger than the element size are architecturally - * valid. Unsigned results in all zeros; signed results - * in all sign bits. - */ - if (!u) { - tcg_gen_gvec_sari(size, rd_ofs, rm_ofs, - MIN(shift, (8 << size) - 1), - vec_size, vec_size); - } else if (shift >= 8 << size) { - tcg_gen_gvec_dup_imm(MO_8, rd_ofs, vec_size, - vec_size, 0); - } else { - tcg_gen_gvec_shri(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - case 1: /* VSRA */ /* Right shift comes here negative. */ shift = -shift; -- 2.20.1 Convert the VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree. (These are the last instructions in the group that are vectorized; the rest all require looping over each element.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-4-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 35 ++++++++++++++++++++++ target/arm/translate-neon.inc.c | 7 +++++ target/arm/translate.c | 52 +++------------------------------ 3 files changed, 46 insertions(+), 48 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h VSHR_U_2sh 1111 001 1 1 . ...... .... 0000 . . . 1 .... @2reg_shr_b +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_d +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_s +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_h +VSRA_S_2sh 1111 001 0 1 . ...... .... 0001 . . . 1 .... @2reg_shr_b + +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_d +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_s +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_h +VSRA_U_2sh 1111 001 1 1 . ...... .... 0001 . . . 1 .... @2reg_shr_b + +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_d +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_s +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_h +VRSHR_S_2sh 1111 001 0 1 . ...... .... 0010 . . . 1 .... @2reg_shr_b + +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_d +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_s +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_h +VRSHR_U_2sh 1111 001 1 1 . ...... .... 0010 . . . 1 .... @2reg_shr_b + +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_d +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_s +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_h +VRSRA_S_2sh 1111 001 0 1 . ...... .... 0011 . . . 1 .... @2reg_shr_b + +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_d +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_s +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_h +VRSRA_U_2sh 1111 001 1 1 . ...... .... 0011 . . . 1 .... @2reg_shr_b + +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_d +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_s +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_h +VSRI_2sh 1111 001 1 1 . ...... .... 0100 . . . 1 .... @2reg_shr_b + VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSHL_2sh 1111 001 0 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) DO_2SH(VSHL, tcg_gen_gvec_shli) DO_2SH(VSLI, gen_gvec_sli) +DO_2SH(VSRI, gen_gvec_sri) +DO_2SH(VSRA_S, gen_gvec_ssra) +DO_2SH(VSRA_U, gen_gvec_usra) +DO_2SH(VRSHR_S, gen_gvec_srshr) +DO_2SH(VRSHR_U, gen_gvec_urshr) +DO_2SH(VRSRA_S, gen_gvec_srsra) +DO_2SH(VRSRA_U, gen_gvec_ursra) static bool trans_VSHR_S_2sh(DisasContext *s, arg_2reg_shift *a) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) switch (op) { case 0: /* VSHR */ + case 1: /* VSRA */ + case 2: /* VRSHR */ + case 3: /* VRSRA */ + case 4: /* VSRI */ case 5: /* VSHL, VSLI */ return 1; /* handled by decodetree */ default: @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) shift = shift - (1 << (size + 3)); } - switch (op) { - case 1: /* VSRA */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_usra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_ssra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 2: /* VRSHR */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_urshr(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_srshr(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 3: /* VRSRA */ - /* Right shift comes here negative. */ - shift = -shift; - if (u) { - gen_gvec_ursra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } else { - gen_gvec_srsra(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - } - return 0; - - case 4: /* VSRI */ - if (!u) { - return 1; - } - /* Right shift comes here negative. */ - shift = -shift; - gen_gvec_sri(size, rd_ofs, rm_ofs, shift, - vec_size, vec_size); - return 0; - } - if (size == 3) { count = q + 1; } else { -- 2.20.1 Convert the VQSHLU and QVSHL 2-reg-shift insns to decodetree. These are the last of the simple shift-by-immediate insns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-5-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 15 +++++ target/arm/translate-neon.inc.c | 108 +++++++++++++++++++++++++++++++ target/arm/translate.c | 110 +------------------------------- 3 files changed, 126 insertions(+), 107 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_d VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_s VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_h VSLI_2sh 1111 001 1 1 . ...... .... 0101 . . . 1 .... @2reg_shl_b + +VQSHLU_64_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_d +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_s +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_h +VQSHLU_2sh 1111 001 1 1 . ...... .... 0110 . . . 1 .... @2reg_shl_b + +VQSHL_S_64_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h +VQSHL_S_2sh 1111 001 0 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b + +VQSHL_U_64_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h +VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHR_U_2sh(DisasContext *s, arg_2reg_shift *a) return do_vector_2sh(s, a, tcg_gen_gvec_shri); } } + +static bool do_2shift_env_64(DisasContext *s, arg_2reg_shift *a, + NeonGenTwo64OpEnvFn *fn) +{ + /* + * 2-reg-and-shift operations, size == 3 case, where the + * function needs to be passed cpu_env. + */ + TCGv_i64 constimm; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * To avoid excessive duplication of ops we implement shift + * by immediate using the variable shift operations. + */ + constimm = tcg_const_i64(dup_const(a->size, a->shift)); + + for (pass = 0; pass < a->q + 1; pass++) { + TCGv_i64 tmp = tcg_temp_new_i64(); + + neon_load_reg64(tmp, a->vm + pass); + fn(tmp, cpu_env, tmp, constimm); + neon_store_reg64(tmp, a->vd + pass); + } + tcg_temp_free_i64(constimm); + return true; +} + +static bool do_2shift_env_32(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoOpEnvFn *fn) +{ + /* + * 2-reg-and-shift operations, size < 3 case, where the + * helper needs to be passed cpu_env. + */ + TCGv_i32 constimm; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * To avoid excessive duplication of ops we implement shift + * by immediate using the variable shift operations. + */ + constimm = tcg_const_i32(dup_const(a->size, a->shift)); + + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + TCGv_i32 tmp = neon_load_reg(a->vm, pass); + fn(tmp, cpu_env, tmp, constimm); + neon_store_reg(a->vd, pass, tmp); + } + tcg_temp_free_i32(constimm); + return true; +} + +#define DO_2SHIFT_ENV(INSN, FUNC) \ + static bool trans_##INSN##_64_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_env_64(s, a, gen_helper_neon_##FUNC##64); \ + } \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + static NeonGenTwoOpEnvFn * const fns[] = { \ + gen_helper_neon_##FUNC##8, \ + gen_helper_neon_##FUNC##16, \ + gen_helper_neon_##FUNC##32, \ + }; \ + assert(a->size < ARRAY_SIZE(fns)); \ + return do_2shift_env_32(s, a, fns[a->size]); \ + } + +DO_2SHIFT_ENV(VQSHLU, qshlu_s) +DO_2SHIFT_ENV(VQSHL_U, qshl_u) +DO_2SHIFT_ENV(VQSHL_S, qshl_s) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_rsb(int size, TCGv_i32 t0, TCGv_i32 t1) } } -#define GEN_NEON_INTEGER_OP_ENV(name) do { \ - switch ((size << 1) | u) { \ - case 0: \ - gen_helper_neon_##name##_s8(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 1: \ - gen_helper_neon_##name##_u8(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 2: \ - gen_helper_neon_##name##_s16(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 3: \ - gen_helper_neon_##name##_u16(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 4: \ - gen_helper_neon_##name##_s32(tmp, cpu_env, tmp, tmp2); \ - break; \ - case 5: \ - gen_helper_neon_##name##_u32(tmp, cpu_env, tmp, tmp2); \ - break; \ - default: return 1; \ - }} while (0) - static TCGv_i32 neon_load_scratch(int scratch) { TCGv_i32 tmp = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int size; int shift; int pass; - int count; int u; int vec_size; uint32_t imm; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 3: /* VRSRA */ case 4: /* VSRI */ case 5: /* VSHL, VSLI */ + case 6: /* VQSHLU */ + case 7: /* VQSHL */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op < 8) { - /* Shift by immediate: - VSHR, VSRA, VRSHR, VRSRA, VSRI, VSHL, VQSHL, VQSHLU. */ - if (q && ((rd | rm) & 1)) { - return 1; - } - if (!u && (op == 4 || op == 6)) { - return 1; - } - /* Right shifts are encoded as N - shift, where N is the - element size in bits. */ - if (op <= 4) { - shift = shift - (1 << (size + 3)); - } - - if (size == 3) { - count = q + 1; - } else { - count = q ? 4: 2; - } - - /* To avoid excessive duplication of ops we implement shift - * by immediate using the variable shift operations. - */ - imm = dup_const(size, shift); - - for (pass = 0; pass < count; pass++) { - if (size == 3) { - neon_load_reg64(cpu_V0, rm + pass); - tcg_gen_movi_i64(cpu_V1, imm); - switch (op) { - case 6: /* VQSHLU */ - gen_helper_neon_qshlu_s64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - break; - case 7: /* VQSHL */ - if (u) { - gen_helper_neon_qshl_u64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - } else { - gen_helper_neon_qshl_s64(cpu_V0, cpu_env, - cpu_V0, cpu_V1); - } - break; - default: - g_assert_not_reached(); - } - neon_store_reg64(cpu_V0, rd + pass); - } else { /* size < 3 */ - /* Operands in T0 and T1. */ - tmp = neon_load_reg(rm, pass); - tmp2 = tcg_temp_new_i32(); - tcg_gen_movi_i32(tmp2, imm); - switch (op) { - case 6: /* VQSHLU */ - switch (size) { - case 0: - gen_helper_neon_qshlu_s8(tmp, cpu_env, - tmp, tmp2); - break; - case 1: - gen_helper_neon_qshlu_s16(tmp, cpu_env, - tmp, tmp2); - break; - case 2: - gen_helper_neon_qshlu_s32(tmp, cpu_env, - tmp, tmp2); - break; - default: - abort(); - } - break; - case 7: /* VQSHL */ - GEN_NEON_INTEGER_OP_ENV(qshl); - break; - default: - g_assert_not_reached(); - } - tcg_temp_free_i32(tmp2); - neon_store_reg(rd, pass, tmp); - } - } /* for pass */ - } else if (op < 10) { + if (op < 10) { /* Shift by immediate and narrow: VSHRN, VRSHRN, VQSHRN, VQRSHRN. */ int input_unsigned = (op == 8) ? !u : u; -- 2.20.1 Convert the Neon narrowing shifts where op==8 to decodetree: * VSHRN * VRSHRN * VQSHRUN * VQRSHRUN Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-6-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 27 ++++++ target/arm/translate-neon.inc.c | 167 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 1 + 3 files changed, 195 insertions(+) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shl_b .... ... . . . 001 shift:3 .... .... 0 q:1 . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 +# Narrowing right shifts: here the Q bit is part of the opcode decode +@2reg_shrn_d .... ... . . . 1 ..... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=3 q=0 \ + shift=%neon_rshift_i5 +@2reg_shrn_s .... ... . . . 01 .... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 q=0 \ + shift=%neon_rshift_i4 +@2reg_shrn_h .... ... . . . 001 ... .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 \ + shift=%neon_rshift_i3 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VQSHL_U_64_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_d VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_s VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_h VQSHL_U_2sh 1111 001 1 1 . ...... .... 0111 . . . 1 .... @2reg_shl_b + +VSHRN_64_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_d +VSHRN_32_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_s +VSHRN_16_2sh 1111 001 0 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h + +VRSHRN_64_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d +VRSHRN_32_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s +VRSHRN_16_2sh 1111 001 0 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h + +VQSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_d +VQSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_s +VQSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h + +VQRSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d +VQRSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s +VQRSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool do_2shift_env_32(DisasContext *s, arg_2reg_shift *a, DO_2SHIFT_ENV(VQSHLU, qshlu_s) DO_2SHIFT_ENV(VQSHL_U, qshl_u) DO_2SHIFT_ENV(VQSHL_S, qshl_s) + +static bool do_2shift_narrow_64(DisasContext *s, arg_2reg_shift *a, + NeonGenTwo64OpFn *shiftfn, + NeonGenNarrowEnvFn *narrowfn) +{ + /* 2-reg-and-shift narrowing-shift operations, size == 3 case */ + TCGv_i64 constimm, rm1, rm2; + TCGv_i32 rd; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vm & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is always a right shift, and the shiftfn is always a + * left-shift helper, which thus needs the negated shift count. + */ + constimm = tcg_const_i64(-a->shift); + rm1 = tcg_temp_new_i64(); + rm2 = tcg_temp_new_i64(); + + /* Load both inputs first to avoid potential overwrite if rm == rd */ + neon_load_reg64(rm1, a->vm); + neon_load_reg64(rm2, a->vm + 1); + + shiftfn(rm1, rm1, constimm); + rd = tcg_temp_new_i32(); + narrowfn(rd, cpu_env, rm1); + neon_store_reg(a->vd, 0, rd); + + shiftfn(rm2, rm2, constimm); + rd = tcg_temp_new_i32(); + narrowfn(rd, cpu_env, rm2); + neon_store_reg(a->vd, 1, rd); + + tcg_temp_free_i64(rm1); + tcg_temp_free_i64(rm2); + tcg_temp_free_i64(constimm); + + return true; +} + +static bool do_2shift_narrow_32(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoOpFn *shiftfn, + NeonGenNarrowEnvFn *narrowfn) +{ + /* 2-reg-and-shift narrowing-shift operations, size < 3 case */ + TCGv_i32 constimm, rm1, rm2, rm3, rm4; + TCGv_i64 rtmp; + uint32_t imm; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vm & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is always a right shift, and the shiftfn is always a + * left-shift helper, which thus needs the negated shift count + * duplicated into each lane of the immediate value. + */ + if (a->size == 1) { + imm = (uint16_t)(-a->shift); + imm |= imm << 16; + } else { + /* size == 2 */ + imm = -a->shift; + } + constimm = tcg_const_i32(imm); + + /* Load all inputs first to avoid potential overwrite */ + rm1 = neon_load_reg(a->vm, 0); + rm2 = neon_load_reg(a->vm, 1); + rm3 = neon_load_reg(a->vm + 1, 0); + rm4 = neon_load_reg(a->vm + 1, 1); + rtmp = tcg_temp_new_i64(); + + shiftfn(rm1, rm1, constimm); + shiftfn(rm2, rm2, constimm); + + tcg_gen_concat_i32_i64(rtmp, rm1, rm2); + tcg_temp_free_i32(rm2); + + narrowfn(rm1, cpu_env, rtmp); + neon_store_reg(a->vd, 0, rm1); + + shiftfn(rm3, rm3, constimm); + shiftfn(rm4, rm4, constimm); + tcg_temp_free_i32(constimm); + + tcg_gen_concat_i32_i64(rtmp, rm3, rm4); + tcg_temp_free_i32(rm4); + + narrowfn(rm3, cpu_env, rtmp); + tcg_temp_free_i64(rtmp); + neon_store_reg(a->vd, 1, rm3); + return true; +} + +#define DO_2SN_64(INSN, FUNC, NARROWFUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_narrow_64(s, a, FUNC, NARROWFUNC); \ + } +#define DO_2SN_32(INSN, FUNC, NARROWFUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_2shift_narrow_32(s, a, FUNC, NARROWFUNC); \ + } + +static void gen_neon_narrow_u32(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + tcg_gen_extrl_i64_i32(dest, src); +} + +static void gen_neon_narrow_u16(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + gen_helper_neon_narrow_u16(dest, src); +} + +static void gen_neon_narrow_u8(TCGv_i32 dest, TCGv_ptr env, TCGv_i64 src) +{ + gen_helper_neon_narrow_u8(dest, src); +} + +DO_2SN_64(VSHRN_64, gen_ushl_i64, gen_neon_narrow_u32) +DO_2SN_32(VSHRN_32, gen_ushl_i32, gen_neon_narrow_u16) +DO_2SN_32(VSHRN_16, gen_helper_neon_shl_u16, gen_neon_narrow_u8) + +DO_2SN_64(VRSHRN_64, gen_helper_neon_rshl_u64, gen_neon_narrow_u32) +DO_2SN_32(VRSHRN_32, gen_helper_neon_rshl_u32, gen_neon_narrow_u16) +DO_2SN_32(VRSHRN_16, gen_helper_neon_rshl_u16, gen_neon_narrow_u8) + +DO_2SN_64(VQSHRUN_64, gen_sshl_i64, gen_helper_neon_unarrow_sat32) +DO_2SN_32(VQSHRUN_32, gen_sshl_i32, gen_helper_neon_unarrow_sat16) +DO_2SN_32(VQSHRUN_16, gen_helper_neon_shl_s16, gen_helper_neon_unarrow_sat8) + +DO_2SN_64(VQRSHRUN_64, gen_helper_neon_rshl_s64, gen_helper_neon_unarrow_sat32) +DO_2SN_32(VQRSHRUN_32, gen_helper_neon_rshl_s32, gen_helper_neon_unarrow_sat16) +DO_2SN_32(VQRSHRUN_16, gen_helper_neon_rshl_s16, gen_helper_neon_unarrow_sat8) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 5: /* VSHL, VSLI */ case 6: /* VQSHLU */ case 7: /* VQSHL */ + case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ return 1; /* handled by decodetree */ default: break; -- 2.20.1 Convert the remaining Neon narrowing shifts to decodetree: * VQSHRN * VQRSHRN Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-7-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 20 ++++++ target/arm/translate-neon.inc.c | 15 +++++ target/arm/translate.c | 110 +------------------------------- 3 files changed, 37 insertions(+), 108 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VQSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 0 . 1 .... @2reg_shrn_h VQRSHRUN_64_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_d VQRSHRUN_32_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_s VQRSHRUN_16_2sh 1111 001 1 1 . ...... .... 1000 . 1 . 1 .... @2reg_shrn_h + +# VQSHRN with signed input +VQSHRN_S64_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_d +VQSHRN_S32_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_s +VQSHRN_S16_2sh 1111 001 0 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h + +# VQRSHRN with signed input +VQRSHRN_S64_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d +VQRSHRN_S32_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s +VQRSHRN_S16_2sh 1111 001 0 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h + +# VQSHRN with unsigned input +VQSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_d +VQSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_s +VQSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h + +# VQRSHRN with unsigned input +VQRSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d +VQRSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s +VQRSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_2SN_32(VQSHRUN_16, gen_helper_neon_shl_s16, gen_helper_neon_unarrow_sat8) DO_2SN_64(VQRSHRUN_64, gen_helper_neon_rshl_s64, gen_helper_neon_unarrow_sat32) DO_2SN_32(VQRSHRUN_32, gen_helper_neon_rshl_s32, gen_helper_neon_unarrow_sat16) DO_2SN_32(VQRSHRUN_16, gen_helper_neon_rshl_s16, gen_helper_neon_unarrow_sat8) +DO_2SN_64(VQSHRN_S64, gen_sshl_i64, gen_helper_neon_narrow_sat_s32) +DO_2SN_32(VQSHRN_S32, gen_sshl_i32, gen_helper_neon_narrow_sat_s16) +DO_2SN_32(VQSHRN_S16, gen_helper_neon_shl_s16, gen_helper_neon_narrow_sat_s8) + +DO_2SN_64(VQRSHRN_S64, gen_helper_neon_rshl_s64, gen_helper_neon_narrow_sat_s32) +DO_2SN_32(VQRSHRN_S32, gen_helper_neon_rshl_s32, gen_helper_neon_narrow_sat_s16) +DO_2SN_32(VQRSHRN_S16, gen_helper_neon_rshl_s16, gen_helper_neon_narrow_sat_s8) + +DO_2SN_64(VQSHRN_U64, gen_ushl_i64, gen_helper_neon_narrow_sat_u32) +DO_2SN_32(VQSHRN_U32, gen_ushl_i32, gen_helper_neon_narrow_sat_u16) +DO_2SN_32(VQSHRN_U16, gen_helper_neon_shl_u16, gen_helper_neon_narrow_sat_u8) + +DO_2SN_64(VQRSHRN_U64, gen_helper_neon_rshl_u64, gen_helper_neon_narrow_sat_u32) +DO_2SN_32(VQRSHRN_U32, gen_helper_neon_rshl_u32, gen_helper_neon_narrow_sat_u16) +DO_2SN_32(VQRSHRN_U16, gen_helper_neon_rshl_u16, gen_helper_neon_narrow_sat_u8) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_unarrow_sats(int size, TCGv_i32 dest, TCGv_i64 src) } } -static inline void gen_neon_shift_narrow(int size, TCGv_i32 var, TCGv_i32 shift, - int q, int u) -{ - if (q) { - if (u) { - switch (size) { - case 1: gen_helper_neon_rshl_u16(var, var, shift); break; - case 2: gen_helper_neon_rshl_u32(var, var, shift); break; - default: abort(); - } - } else { - switch (size) { - case 1: gen_helper_neon_rshl_s16(var, var, shift); break; - case 2: gen_helper_neon_rshl_s32(var, var, shift); break; - default: abort(); - } - } - } else { - if (u) { - switch (size) { - case 1: gen_helper_neon_shl_u16(var, var, shift); break; - case 2: gen_ushl_i32(var, var, shift); break; - default: abort(); - } - } else { - switch (size) { - case 1: gen_helper_neon_shl_s16(var, var, shift); break; - case 2: gen_sshl_i32(var, var, shift); break; - default: abort(); - } - } - } -} - static inline void gen_neon_widen(TCGv_i64 dest, TCGv_i32 src, int size, int u) { if (u) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 6: /* VQSHLU */ case 7: /* VQSHL */ case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ + case 9: /* VQSHRN, VQRSHRN */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op < 10) { - /* Shift by immediate and narrow: - VSHRN, VRSHRN, VQSHRN, VQRSHRN. */ - int input_unsigned = (op == 8) ? !u : u; - if (rm & 1) { - return 1; - } - shift = shift - (1 << (size + 3)); - size++; - if (size == 3) { - tmp64 = tcg_const_i64(shift); - neon_load_reg64(cpu_V0, rm); - neon_load_reg64(cpu_V1, rm + 1); - for (pass = 0; pass < 2; pass++) { - TCGv_i64 in; - if (pass == 0) { - in = cpu_V0; - } else { - in = cpu_V1; - } - if (q) { - if (input_unsigned) { - gen_helper_neon_rshl_u64(cpu_V0, in, tmp64); - } else { - gen_helper_neon_rshl_s64(cpu_V0, in, tmp64); - } - } else { - if (input_unsigned) { - gen_ushl_i64(cpu_V0, in, tmp64); - } else { - gen_sshl_i64(cpu_V0, in, tmp64); - } - } - tmp = tcg_temp_new_i32(); - gen_neon_narrow_op(op == 8, u, size - 1, tmp, cpu_V0); - neon_store_reg(rd, pass, tmp); - } /* for pass */ - tcg_temp_free_i64(tmp64); - } else { - if (size == 1) { - imm = (uint16_t)shift; - imm |= imm << 16; - } else { - /* size == 2 */ - imm = (uint32_t)shift; - } - tmp2 = tcg_const_i32(imm); - tmp4 = neon_load_reg(rm + 1, 0); - tmp5 = neon_load_reg(rm + 1, 1); - for (pass = 0; pass < 2; pass++) { - if (pass == 0) { - tmp = neon_load_reg(rm, 0); - } else { - tmp = tmp4; - } - gen_neon_shift_narrow(size, tmp, tmp2, q, - input_unsigned); - if (pass == 0) { - tmp3 = neon_load_reg(rm, 1); - } else { - tmp3 = tmp5; - } - gen_neon_shift_narrow(size, tmp3, tmp2, q, - input_unsigned); - tcg_gen_concat_i32_i64(cpu_V0, tmp, tmp3); - tcg_temp_free_i32(tmp); - tcg_temp_free_i32(tmp3); - tmp = tcg_temp_new_i32(); - gen_neon_narrow_op(op == 8, u, size - 1, tmp, cpu_V0); - neon_store_reg(rd, pass, tmp); - } /* for pass */ - tcg_temp_free_i32(tmp2); - } - } else if (op == 10) { + if (op == 10) { /* VSHLL, VMOVL */ if (q || (rd & 1)) { return 1; -- 2.20.1 Convert the VSHLL and VMOVL insns from the 2-reg-shift group to decodetree. Since the loop always has two passes, we unroll it to avoid the awkward reassignment of one TCGv to another. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-8-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 16 +++++++ target/arm/translate-neon.inc.c | 81 +++++++++++++++++++++++++++++++++ target/arm/translate.c | 46 +------------------ 3 files changed, 99 insertions(+), 44 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 \ shift=%neon_rshift_i3 +# Long left shifts: again Q is part of opcode decode +@2reg_shll_s .... ... . . . 1 shift:5 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=2 q=0 +@2reg_shll_h .... ... . . . 01 shift:4 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=1 q=0 +@2reg_shll_b .... ... . . . 001 shift:3 .... .... 0 . . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 q=0 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VQSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 0 . 1 .... @2reg_shrn_h VQRSHRN_U64_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_d VQRSHRN_U32_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_s VQRSHRN_U16_2sh 1111 001 1 1 . ...... .... 1001 . 1 . 1 .... @2reg_shrn_h + +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h +VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b + +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h +VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_2SN_32(VQSHRN_U16, gen_helper_neon_shl_u16, gen_helper_neon_narrow_sat_u8) DO_2SN_64(VQRSHRN_U64, gen_helper_neon_rshl_u64, gen_helper_neon_narrow_sat_u32) DO_2SN_32(VQRSHRN_U32, gen_helper_neon_rshl_u32, gen_helper_neon_narrow_sat_u16) DO_2SN_32(VQRSHRN_U16, gen_helper_neon_rshl_u16, gen_helper_neon_narrow_sat_u8) + +static bool do_vshll_2sh(DisasContext *s, arg_2reg_shift *a, + NeonGenWidenFn *widenfn, bool u) +{ + TCGv_i64 tmp; + TCGv_i32 rm0, rm1; + uint64_t widen_mask = 0; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if (a->vd & 1) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + /* + * This is a widen-and-shift operation. The shift is always less + * than the width of the source type, so after widening the input + * vector we can simply shift the whole 64-bit widened register, + * and then clear the potential overflow bits resulting from left + * bits of the narrow input appearing as right bits of the left + * neighbour narrow input. Calculate a mask of bits to clear. + */ + if ((a->shift != 0) && (a->size < 2 || u)) { + int esize = 8 << a->size; + widen_mask = MAKE_64BIT_MASK(0, esize); + widen_mask >>= esize - a->shift; + widen_mask = dup_const(a->size + 1, widen_mask); + } + + rm0 = neon_load_reg(a->vm, 0); + rm1 = neon_load_reg(a->vm, 1); + tmp = tcg_temp_new_i64(); + + widenfn(tmp, rm0); + if (a->shift != 0) { + tcg_gen_shli_i64(tmp, tmp, a->shift); + tcg_gen_andi_i64(tmp, tmp, ~widen_mask); + } + neon_store_reg64(tmp, a->vd); + + widenfn(tmp, rm1); + if (a->shift != 0) { + tcg_gen_shli_i64(tmp, tmp, a->shift); + tcg_gen_andi_i64(tmp, tmp, ~widen_mask); + } + neon_store_reg64(tmp, a->vd + 1); + tcg_temp_free_i64(tmp); + return true; +} + +static bool trans_VSHLL_S_2sh(DisasContext *s, arg_2reg_shift *a) +{ + NeonGenWidenFn *widenfn[] = { + gen_helper_neon_widen_s8, + gen_helper_neon_widen_s16, + tcg_gen_ext_i32_i64, + }; + return do_vshll_2sh(s, a, widenfn[a->size], false); +} + +static bool trans_VSHLL_U_2sh(DisasContext *s, arg_2reg_shift *a) +{ + NeonGenWidenFn *widenfn[] = { + gen_helper_neon_widen_u8, + gen_helper_neon_widen_u16, + tcg_gen_extu_i32_i64, + }; + return do_vshll_2sh(s, a, widenfn[a->size], true); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) case 7: /* VQSHL */ case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ case 9: /* VQSHRN, VQRSHRN */ + case 10: /* VSHLL, including VMOVL */ return 1; /* handled by decodetree */ default: break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) size--; } shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op == 10) { - /* VSHLL, VMOVL */ - if (q || (rd & 1)) { - return 1; - } - tmp = neon_load_reg(rm, 0); - tmp2 = neon_load_reg(rm, 1); - for (pass = 0; pass < 2; pass++) { - if (pass == 1) - tmp = tmp2; - - gen_neon_widen(cpu_V0, tmp, size, u); - - if (shift != 0) { - /* The shift is less than the width of the source - type, so we can just shift the whole register. */ - tcg_gen_shli_i64(cpu_V0, cpu_V0, shift); - /* Widen the result of shift: we need to clear - * the potential overflow bits resulting from - * left bits of the narrow input appearing as - * right bits of left the neighbour narrow - * input. */ - if (size < 2 || !u) { - uint64_t imm64; - if (size == 0) { - imm = (0xffu >> (8 - shift)); - imm |= imm << 16; - } else if (size == 1) { - imm = 0xffff >> (16 - shift); - } else { - /* size == 2 */ - imm = 0xffffffff >> (32 - shift); - } - if (size < 2) { - imm64 = imm | (((uint64_t)imm) << 32); - } else { - imm64 = imm; - } - tcg_gen_andi_i64(cpu_V0, cpu_V0, ~imm64); - } - } - neon_store_reg64(cpu_V0, rd + pass); - } - } else if (op >= 14) { + if (op >= 14) { /* VCVT fixed-point. */ TCGv_ptr fpst; TCGv_i32 shiftv; -- 2.20.1 Convert the VCVT fixed-point conversion operations in the Neon 2-regs-and-shift group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-9-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 11 +++++ target/arm/translate-neon.inc.c | 49 +++++++++++++++++++++ target/arm/translate.c | 75 +-------------------------------- 3 files changed, 62 insertions(+), 73 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp @2reg_shll_b .... ... . . . 001 shift:3 .... .... 0 . . . .... \ &2reg_shift vm=%vm_dp vd=%vd_dp size=0 q=0 +# We use size=0 for fp32 and size=1 for fp16 to match the 3-same encodings. +@2reg_vcvt .... ... . . . 1 ..... .... .... . q:1 . . .... \ + &2reg_shift vm=%vm_dp vd=%vd_dp size=0 shift=%neon_rshift_i5 + VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_d VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_s VSHR_S_2sh 1111 001 0 1 . ...... .... 0000 . . . 1 .... @2reg_shr_h @@ -XXX,XX +XXX,XX @@ VSHLL_S_2sh 1111 001 0 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_s VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_h VSHLL_U_2sh 1111 001 1 1 . ...... .... 1010 . 0 . 1 .... @2reg_shll_b + +# VCVT fixed<->float conversions +# TODO: FP16 fixed<->float conversions are opc==0b1100 and 0b1101 +VCVT_SF_2sh 1111 001 0 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt +VCVT_UF_2sh 1111 001 1 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt +VCVT_FS_2sh 1111 001 0 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt +VCVT_FU_2sh 1111 001 1 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL_U_2sh(DisasContext *s, arg_2reg_shift *a) }; return do_vshll_2sh(s, a, widenfn[a->size], true); } + +static bool do_fp_2sh(DisasContext *s, arg_2reg_shift *a, + NeonGenTwoSingleOPFn *fn) +{ + /* FP operations in 2-reg-and-shift group */ + TCGv_i32 tmp, shiftv; + TCGv_ptr fpstatus; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && + ((a->vd | a->vm) & 0x10)) { + return false; + } + + if ((a->vm | a->vd) & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + fpstatus = get_fpstatus_ptr(1); + shiftv = tcg_const_i32(a->shift); + for (pass = 0; pass < (a->q ? 4 : 2); pass++) { + tmp = neon_load_reg(a->vm, pass); + fn(tmp, tmp, shiftv, fpstatus); + neon_store_reg(a->vd, pass, tmp); + } + tcg_temp_free_ptr(fpstatus); + tcg_temp_free_i32(shiftv); + return true; +} + +#define DO_FP_2SH(INSN, FUNC) \ + static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \ + { \ + return do_fp_2sh(s, a, FUNC); \ + } + +DO_FP_2SH(VCVT_SF, gen_helper_vfp_sltos) +DO_FP_2SH(VCVT_UF, gen_helper_vfp_ultos) +DO_FP_2SH(VCVT_FS, gen_helper_vfp_tosls_round_to_zero) +DO_FP_2SH(VCVT_FU, gen_helper_vfp_touls_round_to_zero) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) int q; int rd, rn, rm, rd_ofs, rn_ofs, rm_ofs; int size; - int shift; int pass; int u; int vec_size; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 1; } else if (insn & (1 << 4)) { if ((insn & 0x00380080) != 0) { - /* Two registers and shift. */ - op = (insn >> 8) & 0xf; - - switch (op) { - case 0: /* VSHR */ - case 1: /* VSRA */ - case 2: /* VRSHR */ - case 3: /* VRSRA */ - case 4: /* VSRI */ - case 5: /* VSHL, VSLI */ - case 6: /* VQSHLU */ - case 7: /* VQSHL */ - case 8: /* VSHRN, VRSHRN, VQSHRUN, VQRSHRUN */ - case 9: /* VQSHRN, VQRSHRN */ - case 10: /* VSHLL, including VMOVL */ - return 1; /* handled by decodetree */ - default: - break; - } - - if (insn & (1 << 7)) { - /* 64-bit shift. */ - if (op > 7) { - return 1; - } - size = 3; - } else { - size = 2; - while ((insn & (1 << (size + 19))) == 0) - size--; - } - shift = (insn >> 16) & ((1 << (3 + size)) - 1); - if (op >= 14) { - /* VCVT fixed-point. */ - TCGv_ptr fpst; - TCGv_i32 shiftv; - VFPGenFixPointFn *fn; - - if (!(insn & (1 << 21)) || (q && ((rd | rm) & 1))) { - return 1; - } - - if (!(op & 1)) { - if (u) { - fn = gen_helper_vfp_ultos; - } else { - fn = gen_helper_vfp_sltos; - } - } else { - if (u) { - fn = gen_helper_vfp_touls_round_to_zero; - } else { - fn = gen_helper_vfp_tosls_round_to_zero; - } - } - - /* We have already masked out the must-be-1 top bit of imm6, - * hence this 32-shift where the ARM ARM has 64-imm6. - */ - shift = 32 - shift; - fpst = get_fpstatus_ptr(1); - shiftv = tcg_const_i32(shift); - for (pass = 0; pass < (q ? 4 : 2); pass++) { - TCGv_i32 tmpf = neon_load_reg(rm, pass); - fn(tmpf, tmpf, shiftv, fpst); - neon_store_reg(rd, pass, tmpf); - } - tcg_temp_free_ptr(fpst); - tcg_temp_free_i32(shiftv); - } else { - return 1; - } + /* Two registers and shift: handled by decodetree */ + return 1; } else { /* (insn & 0x00380080) == 0 */ int invert, reg_ofs, vec_size; -- 2.20.1 Convert the insns in the one-register-and-immediate group to decodetree. In the new decode, our asimd_imm_const() function returns a 64-bit value rather than a 32-bit one, which means we don't need to treat cmode=14 op=1 as a special case in the decoder (it is the only encoding where the two halves of the 64-bit value are different). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200522145520.6778-10-peter.maydell@linaro.org --- target/arm/neon-dp.decode | 22 ++++++ target/arm/translate-neon.inc.c | 118 ++++++++++++++++++++++++++++++++ target/arm/translate.c | 101 +-------------------------- 3 files changed, 142 insertions(+), 99 deletions(-) diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-dp.decode +++ b/target/arm/neon-dp.decode @@ -XXX,XX +XXX,XX @@ VCVT_SF_2sh 1111 001 0 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt VCVT_UF_2sh 1111 001 1 1 . ...... .... 1110 0 . . 1 .... @2reg_vcvt VCVT_FS_2sh 1111 001 0 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt VCVT_FU_2sh 1111 001 1 1 . ...... .... 1111 0 . . 1 .... @2reg_vcvt + +###################################################################### +# 1-reg-and-modified-immediate grouping: +# 1111 001 i 1 D 000 imm:3 Vd:4 cmode:4 0 Q op 1 Vm:4 +###################################################################### + +&1reg_imm vd q imm cmode op + +%asimd_imm_value 24:1 16:3 0:4 + +@1reg_imm .... ... . . . ... ... .... .... . q:1 . . .... \ + &1reg_imm imm=%asimd_imm_value vd=%vd_dp + +# The cmode/op bits here decode VORR/VBIC/VMOV/VMNV, but +# not in a way we can conveniently represent in decodetree without +# a lot of repetition: +# VORR: op=0, (cmode & 1) && cmode < 12 +# VBIC: op=1, (cmode & 1) && cmode < 12 +# VMOV: everything else +# So we have a single decode line and check the cmode/op in the +# trans function. +Vimm_1r 1111 001 . 1 . 000 ... .... cmode:4 0 . op:1 1 .... @1reg_imm diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.inc.c +++ b/target/arm/translate-neon.inc.c @@ -XXX,XX +XXX,XX @@ DO_FP_2SH(VCVT_SF, gen_helper_vfp_sltos) DO_FP_2SH(VCVT_UF, gen_helper_vfp_ultos) DO_FP_2SH(VCVT_FS, gen_helper_vfp_tosls_round_to_zero) DO_FP_2SH(VCVT_FU, gen_helper_vfp_touls_round_to_zero) + +static uint64_t asimd_imm_const(uint32_t imm, int cmode, int op) +{ + /* + * Expand the encoded constant. + * Note that cmode = 2,3,4,5,6,7,10,11,12,13 imm=0 is UNPREDICTABLE. + * We choose to not special-case this and will behave as if a + * valid constant encoding of 0 had been given. + * cmode = 15 op = 1 must UNDEF; we assume decode has handled that. + */ + switch (cmode) { + case 0: case 1: + /* no-op */ + break; + case 2: case 3: + imm <<= 8; + break; + case 4: case 5: + imm <<= 16; + break; + case 6: case 7: + imm <<= 24; + break; + case 8: case 9: + imm |= imm << 16; + break; + case 10: case 11: + imm = (imm << 8) | (imm << 24); + break; + case 12: + imm = (imm << 8) | 0xff; + break; + case 13: + imm = (imm << 16) | 0xffff; + break; + case 14: + if (op) { + /* + * This is the only case where the top and bottom 32 bits + * of the encoded constant differ. + */ + uint64_t imm64 = 0; + int n; + + for (n = 0; n < 8; n++) { + if (imm & (1 << n)) { + imm64 |= (0xffULL << (n * 8)); + } + } + return imm64; + } + imm |= (imm << 8) | (imm << 16) | (imm << 24); + break; + case 15: + imm = ((imm & 0x80) << 24) | ((imm & 0x3f) << 19) + | ((imm & 0x40) ? (0x1f << 25) : (1 << 30)); + break; + } + if (op) { + imm = ~imm; + } + return dup_const(MO_32, imm); +} + +static bool do_1reg_imm(DisasContext *s, arg_1reg_imm *a, + GVecGen2iFn *fn) +{ + uint64_t imm; + int reg_ofs, vec_size; + + if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { + return false; + } + + /* UNDEF accesses to D16-D31 if they don't exist. */ + if (!dc_isar_feature(aa32_simd_r32, s) && (a->vd & 0x10)) { + return false; + } + + if (a->vd & a->q) { + return false; + } + + if (!vfp_access_check(s)) { + return true; + } + + reg_ofs = neon_reg_offset(a->vd, 0); + vec_size = a->q ? 16 : 8; + imm = asimd_imm_const(a->imm, a->cmode, a->op); + + fn(MO_64, reg_ofs, reg_ofs, imm, vec_size, vec_size); + return true; +} + +static void gen_VMOV_1r(unsigned vece, uint32_t dofs, uint32_t aofs, + int64_t c, uint32_t oprsz, uint32_t maxsz) +{ + tcg_gen_gvec_dup_imm(MO_64, dofs, oprsz, maxsz, c); +} + +static bool trans_Vimm_1r(DisasContext *s, arg_1reg_imm *a) +{ + /* Handle decode of cmode/op here between VORR/VBIC/VMOV */ + GVecGen2iFn *fn; + + if ((a->cmode & 1) && a->cmode < 12) { + /* for op=1, the imm will be inverted, so BIC becomes AND. */ + fn = a->op ? tcg_gen_gvec_andi : tcg_gen_gvec_ori; + } else { + /* There is one unallocated cmode/op combination in this space */ + if (a->cmode == 15 && a->op == 1) { + return false; + } + fn = gen_VMOV_1r; + } + return do_1reg_imm(s, a, fn); +} diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) /* Three register same length: handled by decodetree */ return 1; } else if (insn & (1 << 4)) { - if ((insn & 0x00380080) != 0) { - /* Two registers and shift: handled by decodetree */ - return 1; - } else { /* (insn & 0x00380080) == 0 */ - int invert, reg_ofs, vec_size; - - if (q && (rd & 1)) { - return 1; - } - - op = (insn >> 8) & 0xf; - /* One register and immediate. */ - imm = (u << 7) | ((insn >> 12) & 0x70) | (insn & 0xf); - invert = (insn & (1 << 5)) != 0; - /* Note that op = 2,3,4,5,6,7,10,11,12,13 imm=0 is UNPREDICTABLE. - * We choose to not special-case this and will behave as if a - * valid constant encoding of 0 had been given. - */ - switch (op) { - case 0: case 1: - /* no-op */ - break; - case 2: case 3: - imm <<= 8; - break; - case 4: case 5: - imm <<= 16; - break; - case 6: case 7: - imm <<= 24; - break; - case 8: case 9: - imm |= imm << 16; - break; - case 10: case 11: - imm = (imm << 8) | (imm << 24); - break; - case 12: - imm = (imm << 8) | 0xff; - break; - case 13: - imm = (imm << 16) | 0xffff; - break; - case 14: - imm |= (imm << 8) | (imm << 16) | (imm << 24); - if (invert) { - imm = ~imm; - } - break; - case 15: - if (invert) { - return 1; - } - imm = ((imm & 0x80) << 24) | ((imm & 0x3f) << 19) - | ((imm & 0x40) ? (0x1f << 25) : (1 << 30)); - break; - } - if (invert) { - imm = ~imm; - } - - reg_ofs = neon_reg_offset(rd, 0); - vec_size = q ? 16 : 8; - - if (op & 1 && op < 12) { - if (invert) { - /* The immediate value has already been inverted, - * so BIC becomes AND. - */ - tcg_gen_gvec_andi(MO_32, reg_ofs, reg_ofs, imm, - vec_size, vec_size); - } else { - tcg_gen_gvec_ori(MO_32, reg_ofs, reg_ofs, imm, - vec_size, vec_size); - } - } else { - /* VMOV, VMVN. */ - if (op == 14 && invert) { - TCGv_i64 t64 = tcg_temp_new_i64(); - - for (pass = 0; pass <= q; ++pass) { - uint64_t val = 0; - int n; - - for (n = 0; n < 8; n++) { - if (imm & (1 << (n + pass * 8))) { - val |= 0xffull << (n * 8); - } - } - tcg_gen_movi_i64(t64, val); - neon_store_reg64(t64, rd + pass); - } - tcg_temp_free_i64(t64); - } else { - tcg_gen_gvec_dup_imm(MO_32, reg_ofs, vec_size, - vec_size, imm); - } - } - } + /* Two registers and shift or reg and imm: handled by decodetree */ + return 1; } else { /* (insn & 0x00800010 == 0x00800000) */ if (size != 3) { op = (insn >> 8) & 0xf; -- 2.20.1