Second lot of ARM changes to sneak in before freeze: * fixed version of the raspi2 sd controller patches * GICv3 save/restore * v7M QOMify I've also included the Linux header update patches stolen from Paolo's pullreq since it hasn't quite hit master yet. thanks -- PMM The following changes since commit 1bbe5dc66b770d7bedd1d51d7935da948a510dd6: Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170228' into staging (2017-02-28 14:50:17 +0000) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170228-1 for you to fetch changes up to 1eeb5c7deacbfb4d4cad17590a16a99f3d85eabb: bcm2835: add sdhost and gpio controllers (2017-02-28 17:10:00 +0000) ---------------------------------------------------------------- target-arm queue: * raspi2: add gpio controller and sdhost controller, with the wiring so the guest can switch which controller the SD card is attached to (this is sufficient to get raspbian kernels to boot) * GICv3: support state save/restore from KVM * update Linux headers to 4.11 * refactor and QOMify the ARMv7M container object ---------------------------------------------------------------- Clement Deschamps (3): hw/sd: add card-reparenting function bcm2835_gpio: add bcm2835 gpio controller bcm2835: add sdhost and gpio controllers Paolo Bonzini (2): update-linux-headers: update for 4.11 update Linux headers to 4.11 Peter Maydell (12): armv7m: Abstract out the "load kernel" code armv7m: Move NVICState struct definition into header armv7m: QOMify the armv7m container armv7m: Use QOMified armv7m object in armv7m_init() armv7m: Make ARMv7M object take memory region link armv7m: Make NVIC expose a memory region rather than mapping itself armv7m: Make bitband device take the address space to access armv7m: Don't put core v7M devices under CONFIG_STELLARIS armv7m: Split systick out from NVIC stm32f205: Create armv7m object without using armv7m_init() stm32f205: Rename 'nvic' local to 'armv7m' qdev: Have qdev_set_parent_bus() handle devices already on a bus Vijaya Kumar K (4): hw/intc/arm_gicv3_kvm: Add ICC_SRE_EL1 register to vmstate hw/intc/arm_gicv3_kvm: Implement get/put functions target-arm: Add GICv3CPUState in CPUARMState struct hw/intc/arm_gicv3_kvm: Reset GICv3 cpu interface registers hw/gpio/Makefile.objs | 1 + hw/intc/Makefile.objs | 2 +- hw/timer/Makefile.objs | 1 + hw/intc/gicv3_internal.h | 3 + include/hw/arm/arm.h | 12 + include/hw/arm/armv7m.h | 63 +++ include/hw/arm/armv7m_nvic.h | 62 ++ include/hw/arm/bcm2835_peripherals.h | 4 + include/hw/arm/stm32f205_soc.h | 4 +- include/hw/gpio/bcm2835_gpio.h | 39 ++ include/hw/intc/arm_gicv3_common.h | 1 + include/hw/sd/sd.h | 11 + include/hw/timer/armv7m_systick.h | 34 ++ include/standard-headers/asm-x86/hyperv.h | 8 + include/standard-headers/linux/input-event-codes.h | 2 +- include/standard-headers/linux/pci_regs.h | 25 + include/standard-headers/linux/virtio_ids.h | 1 + linux-headers/asm-arm/kvm.h | 15 + linux-headers/asm-arm/unistd-common.h | 357 ++++++++++++ linux-headers/asm-arm/unistd-eabi.h | 5 + linux-headers/asm-arm/unistd-oabi.h | 17 + linux-headers/asm-arm/unistd.h | 419 +------------- linux-headers/asm-arm64/kvm.h | 13 + linux-headers/asm-powerpc/kvm.h | 27 + linux-headers/asm-powerpc/unistd.h | 1 + linux-headers/asm-x86/kvm_para.h | 13 +- linux-headers/linux/kvm.h | 24 +- linux-headers/linux/kvm_para.h | 2 + linux-headers/linux/userfaultfd.h | 67 ++- linux-headers/linux/vfio.h | 10 + target/arm/cpu.h | 2 + hw/arm/armv7m.c | 379 ++++++++----- hw/arm/bcm2835_peripherals.c | 43 +- hw/arm/netduino2.c | 7 +- hw/arm/stm32f205_soc.c | 28 +- hw/core/qdev.c | 14 + hw/gpio/bcm2835_gpio.c | 353 ++++++++++++ hw/intc/arm_gicv3_common.c | 38 ++ hw/intc/arm_gicv3_cpuif.c | 8 + hw/intc/arm_gicv3_kvm.c | 629 ++++++++++++++++++++- hw/intc/armv7m_nvic.c | 214 ++----- hw/sd/core.c | 27 + hw/timer/armv7m_systick.c | 240 ++++++++ default-configs/arm-softmmu.mak | 2 + hw/timer/trace-events | 6 + scripts/update-linux-headers.sh | 13 +- 46 files changed, 2479 insertions(+), 767 deletions(-) create mode 100644 include/hw/arm/armv7m.h create mode 100644 include/hw/arm/armv7m_nvic.h create mode 100644 include/hw/gpio/bcm2835_gpio.h create mode 100644 include/hw/timer/armv7m_systick.h create mode 100644 linux-headers/asm-arm/unistd-common.h create mode 100644 linux-headers/asm-arm/unistd-eabi.h create mode 100644 linux-headers/asm-arm/unistd-oabi.h create mode 100644 hw/gpio/bcm2835_gpio.c create mode 100644 hw/timer/armv7m_systick.c Abstract the "load kernel" code out of armv7m_init() into its own function. This includes the registration of the CPU reset function, to parallel how we handle this for A profile cores. We make the function public so that boards which choose to directly instantiate an ARMv7M device object can call it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-2-git-send-email-peter.maydell@linaro.org --- include/hw/arm/arm.h | 12 ++++++++++++ hw/arm/armv7m.c | 23 ++++++++++++++++++----- 2 files changed, 30 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/arm.h b/include/hw/arm/arm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/arm.h +++ b/include/hw/arm/arm.h @@ -XXX,XX +XXX,XX @@ typedef enum { /* armv7m.c */ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, const char *kernel_filename, const char *cpu_model); +/** + * armv7m_load_kernel: + * @cpu: CPU + * @kernel_filename: file to load + * @mem_size: mem_size: maximum image size to load + * + * Load the guest image for an ARMv7M system. This must be called by + * any ARMv7M board, either directly or via armv7m_init(). (This is + * necessary to ensure that the CPU resets correctly on system reset, + * as well as for kernel loading.) + */ +void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size); /* * struct used as a parameter of the arm_load_kernel machine init diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, ARMCPU *cpu; CPUARMState *env; DeviceState *nvic; - int image_size; - uint64_t entry; - uint64_t lowaddr; - int big_endian; if (cpu_model == NULL) { cpu_model = "cortex-m3"; @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, qdev_init_nofail(nvic); sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); + armv7m_load_kernel(cpu, kernel_filename, mem_size); + return nvic; +} + +void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) +{ + int image_size; + uint64_t entry; + uint64_t lowaddr; + int big_endian; #ifdef TARGET_WORDS_BIGENDIAN big_endian = 1; @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, } } + /* CPU objects (unlike devices) are not automatically reset on system + * reset, so we must always register a handler to do so. Unlike + * A-profile CPUs, we don't need to do anything special in the + * handler to arrange that it starts correctly. + * This is arguably the wrong place to do this, but it matches the + * way A-profile does it. Note that this means that every M profile + * board must call this function! + */ qemu_register_reset(armv7m_reset, cpu); - return nvic; } static Property bitband_properties[] = { -- 2.7.4 Move the NVICState struct definition into a header, so we can embed it into other QOM objects like SoCs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-3-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m_nvic.h | 66 ++++++++++++++++++++++++++++++++++++++++++++ hw/intc/armv7m_nvic.c | 49 +------------------------------- 2 files changed, 67 insertions(+), 48 deletions(-) create mode 100644 include/hw/arm/armv7m_nvic.h diff --git a/include/hw/arm/armv7m_nvic.h b/include/hw/arm/armv7m_nvic.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M NVIC object + * + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell <peter.maydell@linaro.org> + * + * This code is licensed under the GPL version 2 or later. + */ + +#ifndef HW_ARM_ARMV7M_NVIC_H +#define HW_ARM_ARMV7M_NVIC_H + +#include "target/arm/cpu.h" +#include "hw/sysbus.h" + +#define TYPE_NVIC "armv7m_nvic" + +#define NVIC(obj) \ + OBJECT_CHECK(NVICState, (obj), TYPE_NVIC) + +/* Highest permitted number of exceptions (architectural limit) */ +#define NVIC_MAX_VECTORS 512 + +typedef struct VecInfo { + /* Exception priorities can range from -3 to 255; only the unmodifiable + * priority values for RESET, NMI and HardFault can be negative. + */ + int16_t prio; + uint8_t enabled; + uint8_t pending; + uint8_t active; + uint8_t level; /* exceptions <=15 never set level */ +} VecInfo; + +typedef struct NVICState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + ARMCPU *cpu; + + VecInfo vectors[NVIC_MAX_VECTORS]; + uint32_t prigroup; + + /* vectpending and exception_prio are both cached state that can + * be recalculated from the vectors[] array and the prigroup field. + */ + unsigned int vectpending; /* highest prio pending enabled exception */ + int exception_prio; /* group prio of the highest prio active exception */ + + struct { + uint32_t control; + uint32_t reload; + int64_t tick; + QEMUTimer *timer; + } systick; + + MemoryRegion sysregmem; + MemoryRegion container; + + uint32_t num_irq; + qemu_irq excpout; + qemu_irq sysresetreq; +} NVICState; + +#endif diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "qemu/timer.h" #include "hw/arm/arm.h" +#include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" #include "exec/address-spaces.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ * "exception" more or less interchangeably. */ #define NVIC_FIRST_IRQ 16 -#define NVIC_MAX_VECTORS 512 #define NVIC_MAX_IRQ (NVIC_MAX_VECTORS - NVIC_FIRST_IRQ) /* Effective running priority of the CPU when no exception is active @@ -XXX,XX +XXX,XX @@ */ #define NVIC_NOEXC_PRIO 0x100 -typedef struct VecInfo { - /* Exception priorities can range from -3 to 255; only the unmodifiable - * priority values for RESET, NMI and HardFault can be negative. - */ - int16_t prio; - uint8_t enabled; - uint8_t pending; - uint8_t active; - uint8_t level; /* exceptions <=15 never set level */ -} VecInfo; - -typedef struct NVICState { - /*< private >*/ - SysBusDevice parent_obj; - /*< public >*/ - - ARMCPU *cpu; - - VecInfo vectors[NVIC_MAX_VECTORS]; - uint32_t prigroup; - - /* vectpending and exception_prio are both cached state that can - * be recalculated from the vectors[] array and the prigroup field. - */ - unsigned int vectpending; /* highest prio pending enabled exception */ - int exception_prio; /* group prio of the highest prio active exception */ - - struct { - uint32_t control; - uint32_t reload; - int64_t tick; - QEMUTimer *timer; - } systick; - - MemoryRegion sysregmem; - MemoryRegion container; - - uint32_t num_irq; - qemu_irq excpout; - qemu_irq sysresetreq; -} NVICState; - -#define TYPE_NVIC "armv7m_nvic" - -#define NVIC(obj) \ - OBJECT_CHECK(NVICState, (obj), TYPE_NVIC) - static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 }; -- 2.7.4 Create a proper QOM object for the armv7m container, which holds the CPU, the NVIC and the bitband regions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-4-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 51 ++++++++++++++++++ hw/arm/armv7m.c | 139 +++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 178 insertions(+), 12 deletions(-) create mode 100644 include/hw/arm/armv7m.h diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M CPU object + * + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell <peter.maydell@linaro.org> + * + * This code is licensed under the GPL version 2 or later. + */ + +#ifndef HW_ARM_ARMV7M_H +#define HW_ARM_ARMV7M_H + +#include "hw/sysbus.h" +#include "hw/arm/armv7m_nvic.h" + +#define TYPE_BITBAND "ARM,bitband-memory" +#define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + MemoryRegion iomem; + uint32_t base; +} BitBandState; + +#define TYPE_ARMV7M "armv7m" +#define ARMV7M(obj) OBJECT_CHECK(ARMv7MState, (obj), TYPE_ARMV7M) + +#define ARMV7M_NUM_BITBANDS 2 + +/* ARMv7M container object. + * + Unnamed GPIO input lines: external IRQ lines for the NVIC + * + Named GPIO output SYSRESETREQ: signalled for guest AIRCR.SYSRESETREQ + * + Property "cpu-model": CPU model to instantiate + * + Property "num-irq": number of external IRQ lines + */ +typedef struct ARMv7MState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + NVICState nvic; + BitBandState bitband[ARMV7M_NUM_BITBANDS]; + ARMCPU *cpu; + + /* Properties */ + char *cpu_model; +} ARMv7MState; + +#endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "hw/arm/armv7m.h" #include "qapi/error.h" #include "qemu-common.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps bitband_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -#define TYPE_BITBAND "ARM,bitband-memory" -#define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) - -typedef struct { - /*< private >*/ - SysBusDevice parent_obj; - /*< public >*/ - - MemoryRegion iomem; - uint32_t base; -} BitBandState; - static void bitband_init(Object *obj) { BitBandState *s = BITBAND(obj); @@ -XXX,XX +XXX,XX @@ static void armv7m_bitband_init(void) /* Board init. */ +static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { + 0x20000000, 0x40000000 +}; + +static const hwaddr bitband_output_addr[ARMV7M_NUM_BITBANDS] = { + 0x22000000, 0x42000000 +}; + +static void armv7m_instance_init(Object *obj) +{ + ARMv7MState *s = ARMV7M(obj); + int i; + + /* Can't init the cpu here, we don't yet know which model to use */ + + object_initialize(&s->nvic, sizeof(s->nvic), "armv7m_nvic"); + qdev_set_parent_bus(DEVICE(&s->nvic), sysbus_get_default()); + object_property_add_alias(obj, "num-irq", + OBJECT(&s->nvic), "num-irq", &error_abort); + + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + object_initialize(&s->bitband[i], sizeof(s->bitband[i]), TYPE_BITBAND); + qdev_set_parent_bus(DEVICE(&s->bitband[i]), sysbus_get_default()); + } +} + +static void armv7m_realize(DeviceState *dev, Error **errp) +{ + ARMv7MState *s = ARMV7M(dev); + Error *err = NULL; + int i; + char **cpustr; + ObjectClass *oc; + const char *typename; + CPUClass *cc; + + cpustr = g_strsplit(s->cpu_model, ",", 2); + + oc = cpu_class_by_name(TYPE_ARM_CPU, cpustr[0]); + if (!oc) { + error_setg(errp, "Unknown CPU model %s", cpustr[0]); + g_strfreev(cpustr); + return; + } + + cc = CPU_CLASS(oc); + typename = object_class_get_name(oc); + cc->parse_features(typename, cpustr[1], &err); + g_strfreev(cpustr); + if (err) { + error_propagate(errp, err); + return; + } + + s->cpu = ARM_CPU(object_new(typename)); + if (!s->cpu) { + error_setg(errp, "Unknown CPU model %s", s->cpu_model); + return; + } + + object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + /* Note that we must realize the NVIC after the CPU */ + object_property_set_bool(OBJECT(&s->nvic), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + /* Alias the NVIC's input and output GPIOs as our own so the board + * code can wire them up. (We do this in realize because the + * NVIC doesn't create the input GPIO array until realize.) + */ + qdev_pass_gpios(DEVICE(&s->nvic), dev, NULL); + qdev_pass_gpios(DEVICE(&s->nvic), dev, "SYSRESETREQ"); + + /* Wire the NVIC up to the CPU */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->nvic), 0, + qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); + s->cpu->env.nvic = &s->nvic; + + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + Object *obj = OBJECT(&s->bitband[i]); + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); + + object_property_set_int(obj, bitband_input_addr[i], "base", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + object_property_set_bool(obj, true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + sysbus_mmio_map(sbd, 0, bitband_output_addr[i]); + } +} + +static Property armv7m_properties[] = { + DEFINE_PROP_STRING("cpu-model", ARMv7MState, cpu_model), + DEFINE_PROP_END_OF_LIST(), +}; + +static void armv7m_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = armv7m_realize; + dc->props = armv7m_properties; +} + +static const TypeInfo armv7m_info = { + .name = TYPE_ARMV7M, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ARMv7MState), + .instance_init = armv7m_instance_init, + .class_init = armv7m_class_init, +}; + static void armv7m_reset(void *opaque) { ARMCPU *cpu = opaque; @@ -XXX,XX +XXX,XX @@ static const TypeInfo bitband_info = { static void armv7m_register_types(void) { type_register_static(&bitband_info); + type_register_static(&armv7m_info); } type_init(armv7m_register_types) -- 2.7.4 Make the legacy armv7m_init() function use the newly QOMified armv7m object rather than doing everything by hand. We can return the armv7m object rather than the NVIC from armv7m_init() because its interface to the rest of the board (GPIOs, etc) is identical. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-5-git-send-email-peter.maydell@linaro.org --- hw/arm/armv7m.c | 49 ++++++++++++------------------------------------- 1 file changed, 12 insertions(+), 37 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void bitband_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } -static void armv7m_bitband_init(void) -{ - DeviceState *dev; - - dev = qdev_create(NULL, TYPE_BITBAND); - qdev_prop_set_uint32(dev, "base", 0x20000000); - qdev_init_nofail(dev); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x22000000); - - dev = qdev_create(NULL, TYPE_BITBAND); - qdev_prop_set_uint32(dev, "base", 0x40000000); - qdev_init_nofail(dev); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x42000000); -} - /* Board init. */ static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { @@ -XXX,XX +XXX,XX @@ static void armv7m_reset(void *opaque) /* Init CPU and memory for a v7-M based board. mem_size is in bytes. - Returns the NVIC array. */ + Returns the ARMv7M device. */ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, const char *kernel_filename, const char *cpu_model) { - ARMCPU *cpu; - CPUARMState *env; - DeviceState *nvic; + DeviceState *armv7m; if (cpu_model == NULL) { - cpu_model = "cortex-m3"; + cpu_model = "cortex-m3"; } - cpu = cpu_arm_init(cpu_model); - if (cpu == NULL) { - fprintf(stderr, "Unable to find CPU definition\n"); - exit(1); - } - env = &cpu->env; - - armv7m_bitband_init(); - - nvic = qdev_create(NULL, "armv7m_nvic"); - qdev_prop_set_uint32(nvic, "num-irq", num_irq); - env->nvic = nvic; - qdev_init_nofail(nvic); - sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, - qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); - armv7m_load_kernel(cpu, kernel_filename, mem_size); - return nvic; + + armv7m = qdev_create(NULL, "armv7m"); + qdev_prop_set_uint32(armv7m, "num-irq", num_irq); + qdev_prop_set_string(armv7m, "cpu-model", cpu_model); + /* This will exit with an error if the user passed us a bad cpu_model */ + qdev_init_nofail(armv7m); + + armv7m_load_kernel(ARM_CPU(first_cpu), kernel_filename, mem_size); + return armv7m; } void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) -- 2.7.4 Make the ARMv7M object take a memory region link which it uses to wire up the bitband rather than having them always put themselves in the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-6-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 10 ++++++++++ hw/arm/armv7m.c | 23 ++++++++++++++++++++++- 2 files changed, 32 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * + Named GPIO output SYSRESETREQ: signalled for guest AIRCR.SYSRESETREQ * + Property "cpu-model": CPU model to instantiate * + Property "num-irq": number of external IRQ lines + * + Property "memory": MemoryRegion defining the physical address space + * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal + * devices will be automatically layered on top of this view.) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { BitBandState bitband[ARMV7M_NUM_BITBANDS]; ARMCPU *cpu; + /* MemoryRegion we pass to the CPU, with our devices layered on + * top of the ones the board provides in board_memory. + */ + MemoryRegion container; + /* Properties */ char *cpu_model; + /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ + MemoryRegion *board_memory; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ #include "elf.h" #include "sysemu/qtest.h" #include "qemu/error-report.h" +#include "exec/address-spaces.h" /* Bitbanded IO. Each word corresponds to a single bit. */ @@ -XXX,XX +XXX,XX @@ static void armv7m_instance_init(Object *obj) /* Can't init the cpu here, we don't yet know which model to use */ + object_property_add_link(obj, "memory", + TYPE_MEMORY_REGION, + (Object **)&s->board_memory, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + memory_region_init(&s->container, obj, "armv7m-container", UINT64_MAX); + object_initialize(&s->nvic, sizeof(s->nvic), "armv7m_nvic"); qdev_set_parent_bus(DEVICE(&s->nvic), sysbus_get_default()); object_property_add_alias(obj, "num-irq", @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) const char *typename; CPUClass *cc; + if (!s->board_memory) { + error_setg(errp, "memory property was not set"); + return; + } + + memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); + cpustr = g_strsplit(s->cpu_model, ",", 2); oc = cpu_class_by_name(TYPE_ARM_CPU, cpustr[0]); @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } + object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory", + &error_abort); object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } - sysbus_mmio_map(sbd, 0, bitband_output_addr[i]); + memory_region_add_subregion(&s->container, bitband_output_addr[i], + sysbus_mmio_get_region(sbd, 0)); } } @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, armv7m = qdev_create(NULL, "armv7m"); qdev_prop_set_uint32(armv7m, "num-irq", num_irq); qdev_prop_set_string(armv7m, "cpu-model", cpu_model); + object_property_set_link(OBJECT(armv7m), OBJECT(get_system_memory()), + "memory", &error_abort); /* This will exit with an error if the user passed us a bad cpu_model */ qdev_init_nofail(armv7m); -- 2.7.4 Make the NVIC device expose a memory region for its users to map, rather than mapping itself into the system memory space on realize, and get the one user (the ARMv7M object) to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-7-git-send-email-peter.maydell@linaro.org --- hw/arm/armv7m.c | 7 ++++++- hw/intc/armv7m_nvic.c | 7 ++----- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_instance_init(Object *obj) static void armv7m_realize(DeviceState *dev, Error **errp) { ARMv7MState *s = ARMV7M(dev); + SysBusDevice *sbd; Error *err = NULL; int i; char **cpustr; @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) qdev_pass_gpios(DEVICE(&s->nvic), dev, "SYSRESETREQ"); /* Wire the NVIC up to the CPU */ - sysbus_connect_irq(SYS_BUS_DEVICE(&s->nvic), 0, + sbd = SYS_BUS_DEVICE(&s->nvic); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); s->cpu->env.nvic = &s->nvic; + memory_region_add_subregion(&s->container, 0xe000e000, + sysbus_mmio_get_region(sbd, 0)); + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { Object *obj = OBJECT(&s->bitband[i]); SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" -#include "exec/address-spaces.h" #include "qemu/log.h" #include "trace.h" @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) "nvic_sysregs", 0x1000); memory_region_add_subregion(&s->container, 0, &s->sysregmem); - /* Map the whole thing into system memory at the location required - * by the v7M architecture. - */ - memory_region_add_subregion(get_system_memory(), 0xe000e000, &s->container); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container); + s->systick.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); } -- 2.7.4 Instead of the bitband device doing a cpu_physical_memory_read/write, make it take a MemoryRegion which specifies where it should be accessing, and use address_space_read/write to access the corresponding AddressSpace. Since this entails pretty much a rewrite, convert away from old_mmio in the process. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-8-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 2 + hw/arm/armv7m.c | 166 +++++++++++++++++++++++------------------------- 2 files changed, 81 insertions(+), 87 deletions(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { SysBusDevice parent_obj; /*< public >*/ + AddressSpace *source_as; MemoryRegion iomem; uint32_t base; + MemoryRegion *source_memory; } BitBandState; #define TYPE_ARMV7M "armv7m" diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ /* Bitbanded IO. Each word corresponds to a single bit. */ /* Get the byte address of the real memory for a bitband access. */ -static inline uint32_t bitband_addr(void * opaque, uint32_t addr) +static inline hwaddr bitband_addr(BitBandState *s, hwaddr offset) { - uint32_t res; - - res = *(uint32_t *)opaque; - res |= (addr & 0x1ffffff) >> 5; - return res; - -} - -static uint32_t bitband_readb(void *opaque, hwaddr offset) -{ - uint8_t v; - cpu_physical_memory_read(bitband_addr(opaque, offset), &v, 1); - return (v & (1 << ((offset >> 2) & 7))) != 0; -} - -static void bitband_writeb(void *opaque, hwaddr offset, - uint32_t value) -{ - uint32_t addr; - uint8_t mask; - uint8_t v; - addr = bitband_addr(opaque, offset); - mask = (1 << ((offset >> 2) & 7)); - cpu_physical_memory_read(addr, &v, 1); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 1); -} - -static uint32_t bitband_readw(void *opaque, hwaddr offset) -{ - uint32_t addr; - uint16_t mask; - uint16_t v; - addr = bitband_addr(opaque, offset) & ~1; - mask = (1 << ((offset >> 2) & 15)); - mask = tswap16(mask); - cpu_physical_memory_read(addr, &v, 2); - return (v & mask) != 0; -} - -static void bitband_writew(void *opaque, hwaddr offset, - uint32_t value) -{ - uint32_t addr; - uint16_t mask; - uint16_t v; - addr = bitband_addr(opaque, offset) & ~1; - mask = (1 << ((offset >> 2) & 15)); - mask = tswap16(mask); - cpu_physical_memory_read(addr, &v, 2); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 2); + return s->base | (offset & 0x1ffffff) >> 5; } -static uint32_t bitband_readl(void *opaque, hwaddr offset) +static MemTxResult bitband_read(void *opaque, hwaddr offset, + uint64_t *data, unsigned size, MemTxAttrs attrs) { - uint32_t addr; - uint32_t mask; - uint32_t v; - addr = bitband_addr(opaque, offset) & ~3; - mask = (1 << ((offset >> 2) & 31)); - mask = tswap32(mask); - cpu_physical_memory_read(addr, &v, 4); - return (v & mask) != 0; + BitBandState *s = opaque; + uint8_t buf[4]; + MemTxResult res; + int bitpos, bit; + hwaddr addr; + + assert(size <= 4); + + /* Find address in underlying memory and round down to multiple of size */ + addr = bitband_addr(s, offset) & (-size); + res = address_space_read(s->source_as, addr, attrs, buf, size); + if (res) { + return res; + } + /* Bit position in the N bytes read... */ + bitpos = (offset >> 2) & ((size * 8) - 1); + /* ...converted to byte in buffer and bit in byte */ + bit = (buf[bitpos >> 3] >> (bitpos & 7)) & 1; + *data = bit; + return MEMTX_OK; } -static void bitband_writel(void *opaque, hwaddr offset, - uint32_t value) +static MemTxResult bitband_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size, MemTxAttrs attrs) { - uint32_t addr; - uint32_t mask; - uint32_t v; - addr = bitband_addr(opaque, offset) & ~3; - mask = (1 << ((offset >> 2) & 31)); - mask = tswap32(mask); - cpu_physical_memory_read(addr, &v, 4); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 4); + BitBandState *s = opaque; + uint8_t buf[4]; + MemTxResult res; + int bitpos, bit; + hwaddr addr; + + assert(size <= 4); + + /* Find address in underlying memory and round down to multiple of size */ + addr = bitband_addr(s, offset) & (-size); + res = address_space_read(s->source_as, addr, attrs, buf, size); + if (res) { + return res; + } + /* Bit position in the N bytes read... */ + bitpos = (offset >> 2) & ((size * 8) - 1); + /* ...converted to byte in buffer and bit in byte */ + bit = 1 << (bitpos & 7); + if (value & 1) { + buf[bitpos >> 3] |= bit; + } else { + buf[bitpos >> 3] &= ~bit; + } + return address_space_write(s->source_as, addr, attrs, buf, size); } static const MemoryRegionOps bitband_ops = { - .old_mmio = { - .read = { bitband_readb, bitband_readw, bitband_readl, }, - .write = { bitband_writeb, bitband_writew, bitband_writel, }, - }, + .read_with_attrs = bitband_read, + .write_with_attrs = bitband_write, .endianness = DEVICE_NATIVE_ENDIAN, + .impl.min_access_size = 1, + .impl.max_access_size = 4, + .valid.min_access_size = 1, + .valid.max_access_size = 4, }; static void bitband_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void bitband_init(Object *obj) BitBandState *s = BITBAND(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); - memory_region_init_io(&s->iomem, obj, &bitband_ops, &s->base, + object_property_add_link(obj, "source-memory", + TYPE_MEMORY_REGION, + (Object **)&s->source_memory, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + memory_region_init_io(&s->iomem, obj, &bitband_ops, s, "bitband", 0x02000000); sysbus_init_mmio(dev, &s->iomem); } +static void bitband_realize(DeviceState *dev, Error **errp) +{ + BitBandState *s = BITBAND(dev); + + if (!s->source_memory) { + error_setg(errp, "source-memory property not set"); + return; + } + + s->source_as = address_space_init_shareable(s->source_memory, + "bitband-source"); +} + /* Board init. */ static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } + object_property_set_link(obj, OBJECT(s->board_memory), + "source-memory", &error_abort); object_property_set_bool(obj, true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void bitband_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = bitband_realize; dc->props = bitband_properties; } -- 2.7.4 The NVIC is a core v7M device that exists for all v7M CPUs; put it under a CONFIG_ARM_V7M rather than hiding it under CONFIG_STELLARIS. (We'll use CONFIG_ARM_V7M for the SysTick device too when we split it out of the NVIC.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org --- hw/intc/Makefile.objs | 2 +- default-configs/arm-softmmu.mak | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Makefile.objs +++ b/hw/intc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_APIC) += apic.o apic_common.o obj-$(CONFIG_ARM_GIC_KVM) += arm_gic_kvm.o obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_kvm.o obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_its_kvm.o -obj-$(CONFIG_STELLARIS) += armv7m_nvic.o +obj-$(CONFIG_ARM_V7M) += armv7m_nvic.o obj-$(CONFIG_EXYNOS4) += exynos4210_gic.o exynos4210_combiner.o obj-$(CONFIG_GRLIB) += grlib_irqmp.o obj-$(CONFIG_IOAPIC) += ioapic.o diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ARM11MPCORE=y CONFIG_A9MPCORE=y CONFIG_A15MPCORE=y +CONFIG_ARM_V7M=y + CONFIG_ARM_GIC=y CONFIG_ARM_GIC_KVM=$(CONFIG_KVM) CONFIG_ARM_TIMER=y -- 2.7.4 The SysTick timer isn't really part of the NVIC proper; we just modelled it that way back when we couldn't easily have devices that only occupied a small chunk of a memory region. Split it out into its own device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1487604965-23220-10-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/arm/armv7m_nvic.h | 10 +- include/hw/timer/armv7m_systick.h | 34 ++++++ hw/intc/armv7m_nvic.c | 160 ++++++------------------- hw/timer/armv7m_systick.c | 240 ++++++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 6 + 6 files changed, 318 insertions(+), 133 deletions(-) create mode 100644 include/hw/timer/armv7m_systick.h create mode 100644 hw/timer/armv7m_systick.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_ARM_TIMER) += arm_timer.o common-obj-$(CONFIG_ARM_MPTIMER) += arm_mptimer.o +common-obj-$(CONFIG_ARM_V7M) += armv7m_systick.o common-obj-$(CONFIG_A9_GTIMER) += a9gtimer.o common-obj-$(CONFIG_CADENCE) += cadence_ttc.o common-obj-$(CONFIG_DS1338) += ds1338.o diff --git a/include/hw/arm/armv7m_nvic.h b/include/hw/arm/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m_nvic.h +++ b/include/hw/arm/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/sysbus.h" +#include "hw/timer/armv7m_systick.h" #define TYPE_NVIC "armv7m_nvic" @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { unsigned int vectpending; /* highest prio pending enabled exception */ int exception_prio; /* group prio of the highest prio active exception */ - struct { - uint32_t control; - uint32_t reload; - int64_t tick; - QEMUTimer *timer; - } systick; - MemoryRegion sysregmem; MemoryRegion container; uint32_t num_irq; qemu_irq excpout; qemu_irq sysresetreq; + + SysTickState systick; } NVICState; #endif diff --git a/include/hw/timer/armv7m_systick.h b/include/hw/timer/armv7m_systick.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/armv7m_systick.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M SysTick timer + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell + * + * This code is licensed under the GPL (version 2 or later). + */ + +#ifndef HW_TIMER_ARMV7M_SYSTICK_H +#define HW_TIMER_ARMV7M_SYSTICK_H + +#include "hw/sysbus.h" + +#define TYPE_SYSTICK "armv7m_systick" + +#define SYSTICK(obj) OBJECT_CHECK(SysTickState, (obj), TYPE_SYSTICK) + +typedef struct SysTickState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + uint32_t control; + uint32_t reload; + int64_t tick; + QEMUTimer *timer; + MemoryRegion iomem; + qemu_irq irq; +} SysTickState; + +#endif diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 }; -/* qemu timers run at 1GHz. We want something closer to 1MHz. */ -#define SYSTICK_SCALE 1000ULL - -#define SYSTICK_ENABLE (1 << 0) -#define SYSTICK_TICKINT (1 << 1) -#define SYSTICK_CLKSOURCE (1 << 2) -#define SYSTICK_COUNTFLAG (1 << 16) - -int system_clock_scale; - -/* Conversion factor from qemu timer to SysTick frequencies. */ -static inline int64_t systick_scale(NVICState *s) -{ - if (s->systick.control & SYSTICK_CLKSOURCE) - return system_clock_scale; - else - return 1000; -} - -static void systick_reload(NVICState *s, int reset) -{ - /* The Cortex-M3 Devices Generic User Guide says that "When the - * ENABLE bit is set to 1, the counter loads the RELOAD value from the - * SYST RVR register and then counts down". So, we need to check the - * ENABLE bit before reloading the value. - */ - if ((s->systick.control & SYSTICK_ENABLE) == 0) { - return; - } - - if (reset) - s->systick.tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - s->systick.tick += (s->systick.reload + 1) * systick_scale(s); - timer_mod(s->systick.timer, s->systick.tick); -} - -static void systick_timer_tick(void * opaque) -{ - NVICState *s = (NVICState *)opaque; - s->systick.control |= SYSTICK_COUNTFLAG; - if (s->systick.control & SYSTICK_TICKINT) { - /* Trigger the interrupt. */ - armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); - } - if (s->systick.reload == 0) { - s->systick.control &= ~SYSTICK_ENABLE; - } else { - systick_reload(s, 0); - } -} - -static void systick_reset(NVICState *s) -{ - s->systick.control = 0; - s->systick.reload = 0; - s->systick.tick = 0; - timer_del(s->systick.timer); -} - static int nvic_pending_prio(NVICState *s) { /* return the priority of the current pending interrupt, @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) switch (offset) { case 4: /* Interrupt Control Type. */ return ((s->num_irq - NVIC_FIRST_IRQ) / 32) - 1; - case 0x10: /* SysTick Control and Status. */ - val = s->systick.control; - s->systick.control &= ~SYSTICK_COUNTFLAG; - return val; - case 0x14: /* SysTick Reload Value. */ - return s->systick.reload; - case 0x18: /* SysTick Current Value. */ - { - int64_t t; - if ((s->systick.control & SYSTICK_ENABLE) == 0) - return 0; - t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (t >= s->systick.tick) - return 0; - val = ((s->systick.tick - (t + 1)) / systick_scale(s)) + 1; - /* The interrupt in triggered when the timer reaches zero. - However the counter is not reloaded until the next clock - tick. This is a hack to return zero during the first tick. */ - if (val > s->systick.reload) - val = 0; - return val; - } - case 0x1c: /* SysTick Calibration Value. */ - return 10000; case 0xd00: /* CPUID Base. */ return cpu->midr; case 0xd04: /* Interrupt Control State. */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) { ARMCPU *cpu = s->cpu; - uint32_t oldval; + switch (offset) { - case 0x10: /* SysTick Control and Status. */ - oldval = s->systick.control; - s->systick.control &= 0xfffffff8; - s->systick.control |= value & 7; - if ((oldval ^ value) & SYSTICK_ENABLE) { - int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (value & SYSTICK_ENABLE) { - if (s->systick.tick) { - s->systick.tick += now; - timer_mod(s->systick.timer, s->systick.tick); - } else { - systick_reload(s, 1); - } - } else { - timer_del(s->systick.timer); - s->systick.tick -= now; - if (s->systick.tick < 0) - s->systick.tick = 0; - } - } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { - /* This is a hack. Force the timer to be reloaded - when the reference clock is changed. */ - systick_reload(s, 1); - } - break; - case 0x14: /* SysTick Reload Value. */ - s->systick.reload = value; - break; - case 0x18: /* SysTick Current Value. Writes reload the timer. */ - systick_reload(s, 1); - s->systick.control &= ~SYSTICK_COUNTFLAG; - break; case 0xd04: /* Interrupt Control State. */ if (value & (1 << 31)) { armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_VecInfo = { static const VMStateDescription vmstate_nvic = { .name = "armv7m_nvic", - .version_id = 3, - .minimum_version_id = 3, + .version_id = 4, + .minimum_version_id = 4, .post_load = &nvic_post_load, .fields = (VMStateField[]) { VMSTATE_STRUCT_ARRAY(vectors, NVICState, NVIC_MAX_VECTORS, 1, vmstate_VecInfo, VecInfo), - VMSTATE_UINT32(systick.control, NVICState), - VMSTATE_UINT32(systick.reload, NVICState), - VMSTATE_INT64(systick.tick, NVICState), - VMSTATE_TIMER_PTR(systick.timer, NVICState), VMSTATE_UINT32(prigroup, NVICState), VMSTATE_END_OF_LIST() } @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->exception_prio = NVIC_NOEXC_PRIO; s->vectpending = 0; +} - systick_reset(s); +static void nvic_systick_trigger(void *opaque, int n, int level) +{ + NVICState *s = opaque; + + if (level) { + /* SysTick just asked us to pend its exception. + * (This is different from an external interrupt line's + * behaviour.) + */ + armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); + } } static void armv7m_nvic_realize(DeviceState *dev, Error **errp) { NVICState *s = NVIC(dev); + SysBusDevice *systick_sbd; + Error *err = NULL; s->cpu = ARM_CPU(qemu_get_cpu(0)); assert(s->cpu); @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) /* include space for internal exception vectors */ s->num_irq += NVIC_FIRST_IRQ; + object_property_set_bool(OBJECT(&s->systick), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + systick_sbd = SYS_BUS_DEVICE(&s->systick); + sysbus_connect_irq(systick_sbd, 0, + qdev_get_gpio_in_named(dev, "systick-trigger", 0)); + /* The NVIC and System Control Space (SCS) starts at 0xe000e000 * and looks like this: * 0x004 - ICTR - * 0x010 - 0x1c - systick + * 0x010 - 0xff - systick * 0x100..0x7ec - NVIC * 0x7f0..0xcff - Reserved * 0xd00..0xd3c - SCS registers @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) memory_region_init_io(&s->sysregmem, OBJECT(s), &nvic_sysreg_ops, s, "nvic_sysregs", 0x1000); memory_region_add_subregion(&s->container, 0, &s->sysregmem); + memory_region_add_subregion_overlap(&s->container, 0x10, + sysbus_mmio_get_region(systick_sbd, 0), + 1); sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container); - - s->systick.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); } static void armv7m_nvic_instance_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_instance_init(Object *obj) NVICState *nvic = NVIC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + object_initialize(&nvic->systick, sizeof(nvic->systick), TYPE_SYSTICK); + qdev_set_parent_bus(DEVICE(&nvic->systick), sysbus_get_default()); + sysbus_init_irq(sbd, &nvic->excpout); qdev_init_gpio_out_named(dev, &nvic->sysresetreq, "SYSRESETREQ", 1); + qdev_init_gpio_in_named(dev, nvic_systick_trigger, "systick-trigger", 1); } static void armv7m_nvic_class_init(ObjectClass *klass, void *data) diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/armv7m_systick.c @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M SysTick timer + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell + * + * This code is licensed under the GPL (version 2 or later). + */ + +#include "qemu/osdep.h" +#include "hw/timer/armv7m_systick.h" +#include "qemu-common.h" +#include "hw/sysbus.h" +#include "qemu/timer.h" +#include "qemu/log.h" +#include "trace.h" + +/* qemu timers run at 1GHz. We want something closer to 1MHz. */ +#define SYSTICK_SCALE 1000ULL + +#define SYSTICK_ENABLE (1 << 0) +#define SYSTICK_TICKINT (1 << 1) +#define SYSTICK_CLKSOURCE (1 << 2) +#define SYSTICK_COUNTFLAG (1 << 16) + +int system_clock_scale; + +/* Conversion factor from qemu timer to SysTick frequencies. */ +static inline int64_t systick_scale(SysTickState *s) +{ + if (s->control & SYSTICK_CLKSOURCE) { + return system_clock_scale; + } else { + return 1000; + } +} + +static void systick_reload(SysTickState *s, int reset) +{ + /* The Cortex-M3 Devices Generic User Guide says that "When the + * ENABLE bit is set to 1, the counter loads the RELOAD value from the + * SYST RVR register and then counts down". So, we need to check the + * ENABLE bit before reloading the value. + */ + trace_systick_reload(); + + if ((s->control & SYSTICK_ENABLE) == 0) { + return; + } + + if (reset) { + s->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + } + s->tick += (s->reload + 1) * systick_scale(s); + timer_mod(s->timer, s->tick); +} + +static void systick_timer_tick(void *opaque) +{ + SysTickState *s = (SysTickState *)opaque; + + trace_systick_timer_tick(); + + s->control |= SYSTICK_COUNTFLAG; + if (s->control & SYSTICK_TICKINT) { + /* Tell the NVIC to pend the SysTick exception */ + qemu_irq_pulse(s->irq); + } + if (s->reload == 0) { + s->control &= ~SYSTICK_ENABLE; + } else { + systick_reload(s, 0); + } +} + +static uint64_t systick_read(void *opaque, hwaddr addr, unsigned size) +{ + SysTickState *s = opaque; + uint32_t val; + + switch (addr) { + case 0x0: /* SysTick Control and Status. */ + val = s->control; + s->control &= ~SYSTICK_COUNTFLAG; + break; + case 0x4: /* SysTick Reload Value. */ + val = s->reload; + break; + case 0x8: /* SysTick Current Value. */ + { + int64_t t; + + if ((s->control & SYSTICK_ENABLE) == 0) { + val = 0; + break; + } + t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + if (t >= s->tick) { + val = 0; + break; + } + val = ((s->tick - (t + 1)) / systick_scale(s)) + 1; + /* The interrupt in triggered when the timer reaches zero. + However the counter is not reloaded until the next clock + tick. This is a hack to return zero during the first tick. */ + if (val > s->reload) { + val = 0; + } + break; + } + case 0xc: /* SysTick Calibration Value. */ + val = 10000; + break; + default: + val = 0; + qemu_log_mask(LOG_GUEST_ERROR, + "SysTick: Bad read offset 0x%" HWADDR_PRIx "\n", addr); + break; + } + + trace_systick_read(addr, val, size); + return val; +} + +static void systick_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + SysTickState *s = opaque; + + trace_systick_write(addr, value, size); + + switch (addr) { + case 0x0: /* SysTick Control and Status. */ + { + uint32_t oldval = s->control; + + s->control &= 0xfffffff8; + s->control |= value & 7; + if ((oldval ^ value) & SYSTICK_ENABLE) { + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + if (value & SYSTICK_ENABLE) { + if (s->tick) { + s->tick += now; + timer_mod(s->timer, s->tick); + } else { + systick_reload(s, 1); + } + } else { + timer_del(s->timer); + s->tick -= now; + if (s->tick < 0) { + s->tick = 0; + } + } + } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { + /* This is a hack. Force the timer to be reloaded + when the reference clock is changed. */ + systick_reload(s, 1); + } + break; + } + case 0x4: /* SysTick Reload Value. */ + s->reload = value; + break; + case 0x8: /* SysTick Current Value. Writes reload the timer. */ + systick_reload(s, 1); + s->control &= ~SYSTICK_COUNTFLAG; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "SysTick: Bad write offset 0x%" HWADDR_PRIx "\n", addr); + } +} + +static const MemoryRegionOps systick_ops = { + .read = systick_read, + .write = systick_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static void systick_reset(DeviceState *dev) +{ + SysTickState *s = SYSTICK(dev); + + s->control = 0; + s->reload = 0; + s->tick = 0; + timer_del(s->timer); +} + +static void systick_instance_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + SysTickState *s = SYSTICK(obj); + + memory_region_init_io(&s->iomem, obj, &systick_ops, s, "systick", 0xe0); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); + s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); +} + +static const VMStateDescription vmstate_systick = { + .name = "armv7m_systick", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(control, SysTickState), + VMSTATE_UINT32(reload, SysTickState), + VMSTATE_INT64(tick, SysTickState), + VMSTATE_TIMER_PTR(timer, SysTickState), + VMSTATE_END_OF_LIST() + } +}; + +static void systick_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_systick; + dc->reset = systick_reset; +} + +static const TypeInfo armv7m_systick_info = { + .name = TYPE_SYSTICK, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = systick_instance_init, + .instance_size = sizeof(SysTickState), + .class_init = systick_class_init, +}; + +static void armv7m_systick_register_types(void) +{ + type_register_static(&armv7m_systick_info); +} + +type_init(armv7m_systick_register_types) diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ aspeed_timer_ctrl_pulse_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" aspeed_timer_set_ctrl2(uint32_t value) "Value: 0x%" PRIx32 aspeed_timer_set_value(int timer, int reg, uint32_t value) "Timer %d register %d: 0x%" PRIx32 aspeed_timer_read(uint64_t offset, unsigned size, uint64_t value) "From 0x%" PRIx64 ": of size %u: 0x%" PRIx64 + +# hw/timer/armv7m_systick.c +systick_reload(void) "systick reload" +systick_timer_tick(void) "systick reload" +systick_read(uint64_t addr, uint32_t value, unsigned size) "systick read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" +systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" -- 2.7.4 Switch the stm32f205 SoC to create the armv7m object directly rather than via the armv7m_init() wrapper. This fits better with the SoC model's very QOMified design. In particular this means we can push loading the guest image out to the top level board code where it belongs, rather than the SoC object having a QOM property for the filename to load. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-11-git-send-email-peter.maydell@linaro.org --- include/hw/arm/stm32f205_soc.h | 4 +++- hw/arm/netduino2.c | 7 ++++--- hw/arm/stm32f205_soc.c | 16 +++++++++++++--- 3 files changed, 20 insertions(+), 7 deletions(-) diff --git a/include/hw/arm/stm32f205_soc.h b/include/hw/arm/stm32f205_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32f205_soc.h +++ b/include/hw/arm/stm32f205_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/adc/stm32f2xx_adc.h" #include "hw/or-irq.h" #include "hw/ssi/stm32f2xx_spi.h" +#include "hw/arm/armv7m.h" #define TYPE_STM32F205_SOC "stm32f205-soc" #define STM32F205_SOC(obj) \ @@ -XXX,XX +XXX,XX @@ typedef struct STM32F205State { SysBusDevice parent_obj; /*< public >*/ - char *kernel_filename; char *cpu_model; + ARMv7MState armv7m; + STM32F2XXSyscfgState syscfg; STM32F2XXUsartState usart[STM_NUM_USARTS]; STM32F2XXTimerState timer[STM_NUM_TIMERS]; diff --git a/hw/arm/netduino2.c b/hw/arm/netduino2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/netduino2.c +++ b/hw/arm/netduino2.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "qemu/error-report.h" #include "hw/arm/stm32f205_soc.h" +#include "hw/arm/arm.h" static void netduino2_init(MachineState *machine) { DeviceState *dev; dev = qdev_create(NULL, TYPE_STM32F205_SOC); - if (machine->kernel_filename) { - qdev_prop_set_string(dev, "kernel-filename", machine->kernel_filename); - } qdev_prop_set_string(dev, "cpu-model", "cortex-m3"); object_property_set_bool(OBJECT(dev), true, "realized", &error_fatal); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, + FLASH_SIZE); } static void netduino2_machine_init(MachineClass *mc) diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_initfn(Object *obj) STM32F205State *s = STM32F205_SOC(obj); int i; + object_initialize(&s->armv7m, sizeof(s->armv7m), TYPE_ARMV7M); + qdev_set_parent_bus(DEVICE(&s->armv7m), sysbus_get_default()); + object_initialize(&s->syscfg, sizeof(s->syscfg), TYPE_STM32F2XX_SYSCFG); qdev_set_parent_bus(DEVICE(&s->syscfg), sysbus_get_default()); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) vmstate_register_ram_global(sram); memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); - nvic = armv7m_init(get_system_memory(), FLASH_SIZE, 96, - s->kernel_filename, s->cpu_model); + nvic = DEVICE(&s->armv7m); + qdev_prop_set_uint32(nvic, "num-irq", 96); + qdev_prop_set_string(nvic, "cpu-model", s->cpu_model); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), + "memory", &error_abort); + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } /* System configuration controller */ dev = DEVICE(&s->syscfg); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } static Property stm32f205_soc_properties[] = { - DEFINE_PROP_STRING("kernel-filename", STM32F205State, kernel_filename), DEFINE_PROP_STRING("cpu-model", STM32F205State, cpu_model), DEFINE_PROP_END_OF_LIST(), }; -- 2.7.4 The local variable 'nvic' in stm32f205_soc_realize() no longer holds a direct pointer to the NVIC device; it is a pointer to the ARMv7M container object. Rename it 'armv7m' accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-12-git-send-email-peter.maydell@linaro.org --- hw/arm/stm32f205_soc.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_initfn(Object *obj) static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) { STM32F205State *s = STM32F205_SOC(dev_soc); - DeviceState *dev, *nvic; + DeviceState *dev, *armv7m; SysBusDevice *busdev; Error *err = NULL; int i; @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) vmstate_register_ram_global(sram); memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); - nvic = DEVICE(&s->armv7m); - qdev_prop_set_uint32(nvic, "num-irq", 96); - qdev_prop_set_string(nvic, "cpu-model", s->cpu_model); + armv7m = DEVICE(&s->armv7m); + qdev_prop_set_uint32(armv7m, "num-irq", 96); + qdev_prop_set_string(armv7m, "cpu-model", s->cpu_model); object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), "memory", &error_abort); object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, 0x40013800); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, 71)); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, 71)); /* Attach UART (uses USART registers) and USART controllers */ for (i = 0; i < STM_NUM_USARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, usart_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, usart_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, usart_irq[i])); } /* Timer 2 to 5 */ @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, timer_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, timer_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, timer_irq[i])); } /* ADC 1 to 3 */ @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) return; } qdev_connect_gpio_out(DEVICE(s->adc_irqs), 0, - qdev_get_gpio_in(nvic, ADC_IRQ)); + qdev_get_gpio_in(armv7m, ADC_IRQ)); for (i = 0; i < STM_NUM_ADCS; i++) { dev = DEVICE(&(s->adc[i])); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, spi_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, spi_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, spi_irq[i])); } } -- 2.7.4 From: Paolo Bonzini <pbonzini@redhat.com> The linux-headers/asm-arm/unistd.h file has been split in three sub-files, copy them along. However, building them requires setting ARCH rather than SRCARCH. SRCARCH defaults to $(ARCH) anyway; to avoid future occurrence of the same problem use ARCH for all architectures where SRCARCH=ARCH. Currently these are all except x86, sparc, sh and tile. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20170221122920.16245-2-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- scripts/update-linux-headers.sh | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh index XXXXXXX..XXXXXXX 100755 --- a/scripts/update-linux-headers.sh +++ b/scripts/update-linux-headers.sh @@ -XXX,XX +XXX,XX @@ for arch in $ARCHLIST; do continue fi - make -C "$linux" INSTALL_HDR_PATH="$tmpdir" SRCARCH=$arch headers_install + if [ "$arch" = x86 ]; then + arch_var=SRCARCH + else + arch_var=ARCH + fi + + make -C "$linux" INSTALL_HDR_PATH="$tmpdir" $arch_var=$arch headers_install rm -rf "$output/linux-headers/asm-$arch" mkdir -p "$output/linux-headers/asm-$arch" @@ -XXX,XX +XXX,XX @@ for arch in $ARCHLIST; do cp_portable "$tmpdir/include/asm/kvm_virtio.h" "$output/include/standard-headers/asm-s390/" cp_portable "$tmpdir/include/asm/virtio-ccw.h" "$output/include/standard-headers/asm-s390/" fi + if [ $arch = arm ]; then + cp "$tmpdir/include/asm/unistd-eabi.h" "$output/linux-headers/asm-arm/" + cp "$tmpdir/include/asm/unistd-oabi.h" "$output/linux-headers/asm-arm/" + cp "$tmpdir/include/asm/unistd-common.h" "$output/linux-headers/asm-arm/" + fi if [ $arch = x86 ]; then cp_portable "$tmpdir/include/asm/hyperv.h" "$output/include/standard-headers/asm-x86/" cp "$tmpdir/include/asm/unistd_32.h" "$output/linux-headers/asm-x86/" -- 2.7.4 From: Paolo Bonzini <pbonzini@redhat.com> virtio_mmio.h would be deleted; I am leaving it in though it was a mistake to add it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/standard-headers/asm-x86/hyperv.h | 8 + include/standard-headers/linux/input-event-codes.h | 2 +- include/standard-headers/linux/pci_regs.h | 25 ++ include/standard-headers/linux/virtio_ids.h | 1 + linux-headers/asm-arm/kvm.h | 15 + linux-headers/asm-arm/unistd-common.h | 357 ++++++++++++++++++ linux-headers/asm-arm/unistd-eabi.h | 5 + linux-headers/asm-arm/unistd-oabi.h | 17 + linux-headers/asm-arm/unistd.h | 419 +-------------------- linux-headers/asm-arm64/kvm.h | 13 + linux-headers/asm-powerpc/kvm.h | 27 ++ linux-headers/asm-powerpc/unistd.h | 1 + linux-headers/asm-x86/kvm_para.h | 13 +- linux-headers/linux/kvm.h | 24 +- linux-headers/linux/kvm_para.h | 2 + linux-headers/linux/userfaultfd.h | 67 +++- linux-headers/linux/vfio.h | 10 + 17 files changed, 577 insertions(+), 429 deletions(-) create mode 100644 linux-headers/asm-arm/unistd-common.h create mode 100644 linux-headers/asm-arm/unistd-eabi.h create mode 100644 linux-headers/asm-arm/unistd-oabi.h diff --git a/include/standard-headers/asm-x86/hyperv.h b/include/standard-headers/asm-x86/hyperv.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/asm-x86/hyperv.h +++ b/include/standard-headers/asm-x86/hyperv.h @@ -XXX,XX +XXX,XX @@ */ #define HV_X64_MSR_STAT_PAGES_AVAILABLE (1 << 8) +/* Crash MSR available */ +#define HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE (1 << 10) + /* * Feature identification: EBX indicates which flags were specified at * partition creation. The format is the same as the partition creation @@ -XXX,XX +XXX,XX @@ */ #define HV_X64_RELAXED_TIMING_RECOMMENDED (1 << 5) +/* + * Crash notification flag. + */ +#define HV_CRASH_CTL_CRASH_NOTIFY (1ULL << 63) + /* MSR used to identify the guest OS. */ #define HV_X64_MSR_GUEST_OS_ID 0x40000000 diff --git a/include/standard-headers/linux/input-event-codes.h b/include/standard-headers/linux/input-event-codes.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/input-event-codes.h +++ b/include/standard-headers/linux/input-event-codes.h @@ -XXX,XX +XXX,XX @@ * Control a data application associated with the currently viewed channel, * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.) */ -#define KEY_DATA 0x275 +#define KEY_DATA 0x277 #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -XXX,XX +XXX,XX @@ #define LINUX_PCI_REGS_H /* + * Conventional PCI and PCI-X Mode 1 devices have 256 bytes of + * configuration space. PCI-X Mode 2 and PCIe devices have 4096 bytes of + * configuration space. + */ +#define PCI_CFG_SPACE_SIZE 256 +#define PCI_CFG_SPACE_EXP_SIZE 4096 + +/* * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */ @@ -XXX,XX +XXX,XX @@ #define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ #define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ #define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */ +#define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */ #define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */ #define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PTM @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_DPC_STATUS 8 /* DPC Status */ #define PCI_EXP_DPC_STATUS_TRIGGER 0x01 /* Trigger Status */ #define PCI_EXP_DPC_STATUS_INTERRUPT 0x08 /* Interrupt Status */ +#define PCI_EXP_DPC_RP_BUSY 0x10 /* Root Port Busy */ #define PCI_EXP_DPC_SOURCE_ID 10 /* DPC Source Identifier */ @@ -XXX,XX +XXX,XX @@ #define PCI_PTM_CTRL_ENABLE 0x00000001 /* PTM enable */ #define PCI_PTM_CTRL_ROOT 0x00000002 /* Root select */ +/* L1 PM Substates */ +#define PCI_L1SS_CAP 4 /* capability register */ +#define PCI_L1SS_CAP_PCIPM_L1_2 1 /* PCI PM L1.2 Support */ +#define PCI_L1SS_CAP_PCIPM_L1_1 2 /* PCI PM L1.1 Support */ +#define PCI_L1SS_CAP_ASPM_L1_2 4 /* ASPM L1.2 Support */ +#define PCI_L1SS_CAP_ASPM_L1_1 8 /* ASPM L1.1 Support */ +#define PCI_L1SS_CAP_L1_PM_SS 16 /* L1 PM Substates Support */ +#define PCI_L1SS_CTL1 8 /* Control Register 1 */ +#define PCI_L1SS_CTL1_PCIPM_L1_2 1 /* PCI PM L1.2 Enable */ +#define PCI_L1SS_CTL1_PCIPM_L1_1 2 /* PCI PM L1.1 Support */ +#define PCI_L1SS_CTL1_ASPM_L1_2 4 /* ASPM L1.2 Support */ +#define PCI_L1SS_CTL1_ASPM_L1_1 8 /* ASPM L1.1 Support */ +#define PCI_L1SS_CTL1_L1SS_MASK 0x0000000F +#define PCI_L1SS_CTL2 0xC /* Control Register 2 */ + #endif /* LINUX_PCI_REGS_H */ diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/virtio_ids.h +++ b/include/standard-headers/linux/virtio_ids.h @@ -XXX,XX +XXX,XX @@ #define VIRTIO_ID_INPUT 18 /* virtio input */ #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ #define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ + #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/linux-headers/asm-arm/kvm.h b/linux-headers/asm-arm/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm/kvm.h +++ b/linux-headers/asm-arm/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_regs { /* Supported VGICv3 address types */ #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 +#define KVM_VGIC_ITS_ADDR_TYPE 4 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) +#define KVM_VGIC_V3_ITS_SIZE (2 * SZ_64K) #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ #define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */ @@ -XXX,XX +XXX,XX @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 #define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 +#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ + (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) #define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 #define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 +#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 +#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ + (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff +#define VGIC_LEVEL_INFO_LINE_LEVEL 0 + #define KVM_DEV_ARM_VGIC_CTRL_INIT 0 /* KVM_IRQ_LINE irq field index values */ diff --git a/linux-headers/asm-arm/unistd-common.h b/linux-headers/asm-arm/unistd-common.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-common.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_COMMON_H +#define _ASM_ARM_UNISTD_COMMON_H 1 + +#define __NR_restart_syscall (__NR_SYSCALL_BASE + 0) +#define __NR_exit (__NR_SYSCALL_BASE + 1) +#define __NR_fork (__NR_SYSCALL_BASE + 2) +#define __NR_read (__NR_SYSCALL_BASE + 3) +#define __NR_write (__NR_SYSCALL_BASE + 4) +#define __NR_open (__NR_SYSCALL_BASE + 5) +#define __NR_close (__NR_SYSCALL_BASE + 6) +#define __NR_creat (__NR_SYSCALL_BASE + 8) +#define __NR_link (__NR_SYSCALL_BASE + 9) +#define __NR_unlink (__NR_SYSCALL_BASE + 10) +#define __NR_execve (__NR_SYSCALL_BASE + 11) +#define __NR_chdir (__NR_SYSCALL_BASE + 12) +#define __NR_mknod (__NR_SYSCALL_BASE + 14) +#define __NR_chmod (__NR_SYSCALL_BASE + 15) +#define __NR_lchown (__NR_SYSCALL_BASE + 16) +#define __NR_lseek (__NR_SYSCALL_BASE + 19) +#define __NR_getpid (__NR_SYSCALL_BASE + 20) +#define __NR_mount (__NR_SYSCALL_BASE + 21) +#define __NR_setuid (__NR_SYSCALL_BASE + 23) +#define __NR_getuid (__NR_SYSCALL_BASE + 24) +#define __NR_ptrace (__NR_SYSCALL_BASE + 26) +#define __NR_pause (__NR_SYSCALL_BASE + 29) +#define __NR_access (__NR_SYSCALL_BASE + 33) +#define __NR_nice (__NR_SYSCALL_BASE + 34) +#define __NR_sync (__NR_SYSCALL_BASE + 36) +#define __NR_kill (__NR_SYSCALL_BASE + 37) +#define __NR_rename (__NR_SYSCALL_BASE + 38) +#define __NR_mkdir (__NR_SYSCALL_BASE + 39) +#define __NR_rmdir (__NR_SYSCALL_BASE + 40) +#define __NR_dup (__NR_SYSCALL_BASE + 41) +#define __NR_pipe (__NR_SYSCALL_BASE + 42) +#define __NR_times (__NR_SYSCALL_BASE + 43) +#define __NR_brk (__NR_SYSCALL_BASE + 45) +#define __NR_setgid (__NR_SYSCALL_BASE + 46) +#define __NR_getgid (__NR_SYSCALL_BASE + 47) +#define __NR_geteuid (__NR_SYSCALL_BASE + 49) +#define __NR_getegid (__NR_SYSCALL_BASE + 50) +#define __NR_acct (__NR_SYSCALL_BASE + 51) +#define __NR_umount2 (__NR_SYSCALL_BASE + 52) +#define __NR_ioctl (__NR_SYSCALL_BASE + 54) +#define __NR_fcntl (__NR_SYSCALL_BASE + 55) +#define __NR_setpgid (__NR_SYSCALL_BASE + 57) +#define __NR_umask (__NR_SYSCALL_BASE + 60) +#define __NR_chroot (__NR_SYSCALL_BASE + 61) +#define __NR_ustat (__NR_SYSCALL_BASE + 62) +#define __NR_dup2 (__NR_SYSCALL_BASE + 63) +#define __NR_getppid (__NR_SYSCALL_BASE + 64) +#define __NR_getpgrp (__NR_SYSCALL_BASE + 65) +#define __NR_setsid (__NR_SYSCALL_BASE + 66) +#define __NR_sigaction (__NR_SYSCALL_BASE + 67) +#define __NR_setreuid (__NR_SYSCALL_BASE + 70) +#define __NR_setregid (__NR_SYSCALL_BASE + 71) +#define __NR_sigsuspend (__NR_SYSCALL_BASE + 72) +#define __NR_sigpending (__NR_SYSCALL_BASE + 73) +#define __NR_sethostname (__NR_SYSCALL_BASE + 74) +#define __NR_setrlimit (__NR_SYSCALL_BASE + 75) +#define __NR_getrusage (__NR_SYSCALL_BASE + 77) +#define __NR_gettimeofday (__NR_SYSCALL_BASE + 78) +#define __NR_settimeofday (__NR_SYSCALL_BASE + 79) +#define __NR_getgroups (__NR_SYSCALL_BASE + 80) +#define __NR_setgroups (__NR_SYSCALL_BASE + 81) +#define __NR_symlink (__NR_SYSCALL_BASE + 83) +#define __NR_readlink (__NR_SYSCALL_BASE + 85) +#define __NR_uselib (__NR_SYSCALL_BASE + 86) +#define __NR_swapon (__NR_SYSCALL_BASE + 87) +#define __NR_reboot (__NR_SYSCALL_BASE + 88) +#define __NR_munmap (__NR_SYSCALL_BASE + 91) +#define __NR_truncate (__NR_SYSCALL_BASE + 92) +#define __NR_ftruncate (__NR_SYSCALL_BASE + 93) +#define __NR_fchmod (__NR_SYSCALL_BASE + 94) +#define __NR_fchown (__NR_SYSCALL_BASE + 95) +#define __NR_getpriority (__NR_SYSCALL_BASE + 96) +#define __NR_setpriority (__NR_SYSCALL_BASE + 97) +#define __NR_statfs (__NR_SYSCALL_BASE + 99) +#define __NR_fstatfs (__NR_SYSCALL_BASE + 100) +#define __NR_syslog (__NR_SYSCALL_BASE + 103) +#define __NR_setitimer (__NR_SYSCALL_BASE + 104) +#define __NR_getitimer (__NR_SYSCALL_BASE + 105) +#define __NR_stat (__NR_SYSCALL_BASE + 106) +#define __NR_lstat (__NR_SYSCALL_BASE + 107) +#define __NR_fstat (__NR_SYSCALL_BASE + 108) +#define __NR_vhangup (__NR_SYSCALL_BASE + 111) +#define __NR_wait4 (__NR_SYSCALL_BASE + 114) +#define __NR_swapoff (__NR_SYSCALL_BASE + 115) +#define __NR_sysinfo (__NR_SYSCALL_BASE + 116) +#define __NR_fsync (__NR_SYSCALL_BASE + 118) +#define __NR_sigreturn (__NR_SYSCALL_BASE + 119) +#define __NR_clone (__NR_SYSCALL_BASE + 120) +#define __NR_setdomainname (__NR_SYSCALL_BASE + 121) +#define __NR_uname (__NR_SYSCALL_BASE + 122) +#define __NR_adjtimex (__NR_SYSCALL_BASE + 124) +#define __NR_mprotect (__NR_SYSCALL_BASE + 125) +#define __NR_sigprocmask (__NR_SYSCALL_BASE + 126) +#define __NR_init_module (__NR_SYSCALL_BASE + 128) +#define __NR_delete_module (__NR_SYSCALL_BASE + 129) +#define __NR_quotactl (__NR_SYSCALL_BASE + 131) +#define __NR_getpgid (__NR_SYSCALL_BASE + 132) +#define __NR_fchdir (__NR_SYSCALL_BASE + 133) +#define __NR_bdflush (__NR_SYSCALL_BASE + 134) +#define __NR_sysfs (__NR_SYSCALL_BASE + 135) +#define __NR_personality (__NR_SYSCALL_BASE + 136) +#define __NR_setfsuid (__NR_SYSCALL_BASE + 138) +#define __NR_setfsgid (__NR_SYSCALL_BASE + 139) +#define __NR__llseek (__NR_SYSCALL_BASE + 140) +#define __NR_getdents (__NR_SYSCALL_BASE + 141) +#define __NR__newselect (__NR_SYSCALL_BASE + 142) +#define __NR_flock (__NR_SYSCALL_BASE + 143) +#define __NR_msync (__NR_SYSCALL_BASE + 144) +#define __NR_readv (__NR_SYSCALL_BASE + 145) +#define __NR_writev (__NR_SYSCALL_BASE + 146) +#define __NR_getsid (__NR_SYSCALL_BASE + 147) +#define __NR_fdatasync (__NR_SYSCALL_BASE + 148) +#define __NR__sysctl (__NR_SYSCALL_BASE + 149) +#define __NR_mlock (__NR_SYSCALL_BASE + 150) +#define __NR_munlock (__NR_SYSCALL_BASE + 151) +#define __NR_mlockall (__NR_SYSCALL_BASE + 152) +#define __NR_munlockall (__NR_SYSCALL_BASE + 153) +#define __NR_sched_setparam (__NR_SYSCALL_BASE + 154) +#define __NR_sched_getparam (__NR_SYSCALL_BASE + 155) +#define __NR_sched_setscheduler (__NR_SYSCALL_BASE + 156) +#define __NR_sched_getscheduler (__NR_SYSCALL_BASE + 157) +#define __NR_sched_yield (__NR_SYSCALL_BASE + 158) +#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE + 159) +#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE + 160) +#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE + 161) +#define __NR_nanosleep (__NR_SYSCALL_BASE + 162) +#define __NR_mremap (__NR_SYSCALL_BASE + 163) +#define __NR_setresuid (__NR_SYSCALL_BASE + 164) +#define __NR_getresuid (__NR_SYSCALL_BASE + 165) +#define __NR_poll (__NR_SYSCALL_BASE + 168) +#define __NR_nfsservctl (__NR_SYSCALL_BASE + 169) +#define __NR_setresgid (__NR_SYSCALL_BASE + 170) +#define __NR_getresgid (__NR_SYSCALL_BASE + 171) +#define __NR_prctl (__NR_SYSCALL_BASE + 172) +#define __NR_rt_sigreturn (__NR_SYSCALL_BASE + 173) +#define __NR_rt_sigaction (__NR_SYSCALL_BASE + 174) +#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE + 175) +#define __NR_rt_sigpending (__NR_SYSCALL_BASE + 176) +#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE + 177) +#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE + 178) +#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE + 179) +#define __NR_pread64 (__NR_SYSCALL_BASE + 180) +#define __NR_pwrite64 (__NR_SYSCALL_BASE + 181) +#define __NR_chown (__NR_SYSCALL_BASE + 182) +#define __NR_getcwd (__NR_SYSCALL_BASE + 183) +#define __NR_capget (__NR_SYSCALL_BASE + 184) +#define __NR_capset (__NR_SYSCALL_BASE + 185) +#define __NR_sigaltstack (__NR_SYSCALL_BASE + 186) +#define __NR_sendfile (__NR_SYSCALL_BASE + 187) +#define __NR_vfork (__NR_SYSCALL_BASE + 190) +#define __NR_ugetrlimit (__NR_SYSCALL_BASE + 191) +#define __NR_mmap2 (__NR_SYSCALL_BASE + 192) +#define __NR_truncate64 (__NR_SYSCALL_BASE + 193) +#define __NR_ftruncate64 (__NR_SYSCALL_BASE + 194) +#define __NR_stat64 (__NR_SYSCALL_BASE + 195) +#define __NR_lstat64 (__NR_SYSCALL_BASE + 196) +#define __NR_fstat64 (__NR_SYSCALL_BASE + 197) +#define __NR_lchown32 (__NR_SYSCALL_BASE + 198) +#define __NR_getuid32 (__NR_SYSCALL_BASE + 199) +#define __NR_getgid32 (__NR_SYSCALL_BASE + 200) +#define __NR_geteuid32 (__NR_SYSCALL_BASE + 201) +#define __NR_getegid32 (__NR_SYSCALL_BASE + 202) +#define __NR_setreuid32 (__NR_SYSCALL_BASE + 203) +#define __NR_setregid32 (__NR_SYSCALL_BASE + 204) +#define __NR_getgroups32 (__NR_SYSCALL_BASE + 205) +#define __NR_setgroups32 (__NR_SYSCALL_BASE + 206) +#define __NR_fchown32 (__NR_SYSCALL_BASE + 207) +#define __NR_setresuid32 (__NR_SYSCALL_BASE + 208) +#define __NR_getresuid32 (__NR_SYSCALL_BASE + 209) +#define __NR_setresgid32 (__NR_SYSCALL_BASE + 210) +#define __NR_getresgid32 (__NR_SYSCALL_BASE + 211) +#define __NR_chown32 (__NR_SYSCALL_BASE + 212) +#define __NR_setuid32 (__NR_SYSCALL_BASE + 213) +#define __NR_setgid32 (__NR_SYSCALL_BASE + 214) +#define __NR_setfsuid32 (__NR_SYSCALL_BASE + 215) +#define __NR_setfsgid32 (__NR_SYSCALL_BASE + 216) +#define __NR_getdents64 (__NR_SYSCALL_BASE + 217) +#define __NR_pivot_root (__NR_SYSCALL_BASE + 218) +#define __NR_mincore (__NR_SYSCALL_BASE + 219) +#define __NR_madvise (__NR_SYSCALL_BASE + 220) +#define __NR_fcntl64 (__NR_SYSCALL_BASE + 221) +#define __NR_gettid (__NR_SYSCALL_BASE + 224) +#define __NR_readahead (__NR_SYSCALL_BASE + 225) +#define __NR_setxattr (__NR_SYSCALL_BASE + 226) +#define __NR_lsetxattr (__NR_SYSCALL_BASE + 227) +#define __NR_fsetxattr (__NR_SYSCALL_BASE + 228) +#define __NR_getxattr (__NR_SYSCALL_BASE + 229) +#define __NR_lgetxattr (__NR_SYSCALL_BASE + 230) +#define __NR_fgetxattr (__NR_SYSCALL_BASE + 231) +#define __NR_listxattr (__NR_SYSCALL_BASE + 232) +#define __NR_llistxattr (__NR_SYSCALL_BASE + 233) +#define __NR_flistxattr (__NR_SYSCALL_BASE + 234) +#define __NR_removexattr (__NR_SYSCALL_BASE + 235) +#define __NR_lremovexattr (__NR_SYSCALL_BASE + 236) +#define __NR_fremovexattr (__NR_SYSCALL_BASE + 237) +#define __NR_tkill (__NR_SYSCALL_BASE + 238) +#define __NR_sendfile64 (__NR_SYSCALL_BASE + 239) +#define __NR_futex (__NR_SYSCALL_BASE + 240) +#define __NR_sched_setaffinity (__NR_SYSCALL_BASE + 241) +#define __NR_sched_getaffinity (__NR_SYSCALL_BASE + 242) +#define __NR_io_setup (__NR_SYSCALL_BASE + 243) +#define __NR_io_destroy (__NR_SYSCALL_BASE + 244) +#define __NR_io_getevents (__NR_SYSCALL_BASE + 245) +#define __NR_io_submit (__NR_SYSCALL_BASE + 246) +#define __NR_io_cancel (__NR_SYSCALL_BASE + 247) +#define __NR_exit_group (__NR_SYSCALL_BASE + 248) +#define __NR_lookup_dcookie (__NR_SYSCALL_BASE + 249) +#define __NR_epoll_create (__NR_SYSCALL_BASE + 250) +#define __NR_epoll_ctl (__NR_SYSCALL_BASE + 251) +#define __NR_epoll_wait (__NR_SYSCALL_BASE + 252) +#define __NR_remap_file_pages (__NR_SYSCALL_BASE + 253) +#define __NR_set_tid_address (__NR_SYSCALL_BASE + 256) +#define __NR_timer_create (__NR_SYSCALL_BASE + 257) +#define __NR_timer_settime (__NR_SYSCALL_BASE + 258) +#define __NR_timer_gettime (__NR_SYSCALL_BASE + 259) +#define __NR_timer_getoverrun (__NR_SYSCALL_BASE + 260) +#define __NR_timer_delete (__NR_SYSCALL_BASE + 261) +#define __NR_clock_settime (__NR_SYSCALL_BASE + 262) +#define __NR_clock_gettime (__NR_SYSCALL_BASE + 263) +#define __NR_clock_getres (__NR_SYSCALL_BASE + 264) +#define __NR_clock_nanosleep (__NR_SYSCALL_BASE + 265) +#define __NR_statfs64 (__NR_SYSCALL_BASE + 266) +#define __NR_fstatfs64 (__NR_SYSCALL_BASE + 267) +#define __NR_tgkill (__NR_SYSCALL_BASE + 268) +#define __NR_utimes (__NR_SYSCALL_BASE + 269) +#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE + 270) +#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE + 271) +#define __NR_pciconfig_read (__NR_SYSCALL_BASE + 272) +#define __NR_pciconfig_write (__NR_SYSCALL_BASE + 273) +#define __NR_mq_open (__NR_SYSCALL_BASE + 274) +#define __NR_mq_unlink (__NR_SYSCALL_BASE + 275) +#define __NR_mq_timedsend (__NR_SYSCALL_BASE + 276) +#define __NR_mq_timedreceive (__NR_SYSCALL_BASE + 277) +#define __NR_mq_notify (__NR_SYSCALL_BASE + 278) +#define __NR_mq_getsetattr (__NR_SYSCALL_BASE + 279) +#define __NR_waitid (__NR_SYSCALL_BASE + 280) +#define __NR_socket (__NR_SYSCALL_BASE + 281) +#define __NR_bind (__NR_SYSCALL_BASE + 282) +#define __NR_connect (__NR_SYSCALL_BASE + 283) +#define __NR_listen (__NR_SYSCALL_BASE + 284) +#define __NR_accept (__NR_SYSCALL_BASE + 285) +#define __NR_getsockname (__NR_SYSCALL_BASE + 286) +#define __NR_getpeername (__NR_SYSCALL_BASE + 287) +#define __NR_socketpair (__NR_SYSCALL_BASE + 288) +#define __NR_send (__NR_SYSCALL_BASE + 289) +#define __NR_sendto (__NR_SYSCALL_BASE + 290) +#define __NR_recv (__NR_SYSCALL_BASE + 291) +#define __NR_recvfrom (__NR_SYSCALL_BASE + 292) +#define __NR_shutdown (__NR_SYSCALL_BASE + 293) +#define __NR_setsockopt (__NR_SYSCALL_BASE + 294) +#define __NR_getsockopt (__NR_SYSCALL_BASE + 295) +#define __NR_sendmsg (__NR_SYSCALL_BASE + 296) +#define __NR_recvmsg (__NR_SYSCALL_BASE + 297) +#define __NR_semop (__NR_SYSCALL_BASE + 298) +#define __NR_semget (__NR_SYSCALL_BASE + 299) +#define __NR_semctl (__NR_SYSCALL_BASE + 300) +#define __NR_msgsnd (__NR_SYSCALL_BASE + 301) +#define __NR_msgrcv (__NR_SYSCALL_BASE + 302) +#define __NR_msgget (__NR_SYSCALL_BASE + 303) +#define __NR_msgctl (__NR_SYSCALL_BASE + 304) +#define __NR_shmat (__NR_SYSCALL_BASE + 305) +#define __NR_shmdt (__NR_SYSCALL_BASE + 306) +#define __NR_shmget (__NR_SYSCALL_BASE + 307) +#define __NR_shmctl (__NR_SYSCALL_BASE + 308) +#define __NR_add_key (__NR_SYSCALL_BASE + 309) +#define __NR_request_key (__NR_SYSCALL_BASE + 310) +#define __NR_keyctl (__NR_SYSCALL_BASE + 311) +#define __NR_semtimedop (__NR_SYSCALL_BASE + 312) +#define __NR_vserver (__NR_SYSCALL_BASE + 313) +#define __NR_ioprio_set (__NR_SYSCALL_BASE + 314) +#define __NR_ioprio_get (__NR_SYSCALL_BASE + 315) +#define __NR_inotify_init (__NR_SYSCALL_BASE + 316) +#define __NR_inotify_add_watch (__NR_SYSCALL_BASE + 317) +#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE + 318) +#define __NR_mbind (__NR_SYSCALL_BASE + 319) +#define __NR_get_mempolicy (__NR_SYSCALL_BASE + 320) +#define __NR_set_mempolicy (__NR_SYSCALL_BASE + 321) +#define __NR_openat (__NR_SYSCALL_BASE + 322) +#define __NR_mkdirat (__NR_SYSCALL_BASE + 323) +#define __NR_mknodat (__NR_SYSCALL_BASE + 324) +#define __NR_fchownat (__NR_SYSCALL_BASE + 325) +#define __NR_futimesat (__NR_SYSCALL_BASE + 326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE + 327) +#define __NR_unlinkat (__NR_SYSCALL_BASE + 328) +#define __NR_renameat (__NR_SYSCALL_BASE + 329) +#define __NR_linkat (__NR_SYSCALL_BASE + 330) +#define __NR_symlinkat (__NR_SYSCALL_BASE + 331) +#define __NR_readlinkat (__NR_SYSCALL_BASE + 332) +#define __NR_fchmodat (__NR_SYSCALL_BASE + 333) +#define __NR_faccessat (__NR_SYSCALL_BASE + 334) +#define __NR_pselect6 (__NR_SYSCALL_BASE + 335) +#define __NR_ppoll (__NR_SYSCALL_BASE + 336) +#define __NR_unshare (__NR_SYSCALL_BASE + 337) +#define __NR_set_robust_list (__NR_SYSCALL_BASE + 338) +#define __NR_get_robust_list (__NR_SYSCALL_BASE + 339) +#define __NR_splice (__NR_SYSCALL_BASE + 340) +#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE + 341) +#define __NR_tee (__NR_SYSCALL_BASE + 342) +#define __NR_vmsplice (__NR_SYSCALL_BASE + 343) +#define __NR_move_pages (__NR_SYSCALL_BASE + 344) +#define __NR_getcpu (__NR_SYSCALL_BASE + 345) +#define __NR_epoll_pwait (__NR_SYSCALL_BASE + 346) +#define __NR_kexec_load (__NR_SYSCALL_BASE + 347) +#define __NR_utimensat (__NR_SYSCALL_BASE + 348) +#define __NR_signalfd (__NR_SYSCALL_BASE + 349) +#define __NR_timerfd_create (__NR_SYSCALL_BASE + 350) +#define __NR_eventfd (__NR_SYSCALL_BASE + 351) +#define __NR_fallocate (__NR_SYSCALL_BASE + 352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE + 353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE + 354) +#define __NR_signalfd4 (__NR_SYSCALL_BASE + 355) +#define __NR_eventfd2 (__NR_SYSCALL_BASE + 356) +#define __NR_epoll_create1 (__NR_SYSCALL_BASE + 357) +#define __NR_dup3 (__NR_SYSCALL_BASE + 358) +#define __NR_pipe2 (__NR_SYSCALL_BASE + 359) +#define __NR_inotify_init1 (__NR_SYSCALL_BASE + 360) +#define __NR_preadv (__NR_SYSCALL_BASE + 361) +#define __NR_pwritev (__NR_SYSCALL_BASE + 362) +#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE + 363) +#define __NR_perf_event_open (__NR_SYSCALL_BASE + 364) +#define __NR_recvmmsg (__NR_SYSCALL_BASE + 365) +#define __NR_accept4 (__NR_SYSCALL_BASE + 366) +#define __NR_fanotify_init (__NR_SYSCALL_BASE + 367) +#define __NR_fanotify_mark (__NR_SYSCALL_BASE + 368) +#define __NR_prlimit64 (__NR_SYSCALL_BASE + 369) +#define __NR_name_to_handle_at (__NR_SYSCALL_BASE + 370) +#define __NR_open_by_handle_at (__NR_SYSCALL_BASE + 371) +#define __NR_clock_adjtime (__NR_SYSCALL_BASE + 372) +#define __NR_syncfs (__NR_SYSCALL_BASE + 373) +#define __NR_sendmmsg (__NR_SYSCALL_BASE + 374) +#define __NR_setns (__NR_SYSCALL_BASE + 375) +#define __NR_process_vm_readv (__NR_SYSCALL_BASE + 376) +#define __NR_process_vm_writev (__NR_SYSCALL_BASE + 377) +#define __NR_kcmp (__NR_SYSCALL_BASE + 378) +#define __NR_finit_module (__NR_SYSCALL_BASE + 379) +#define __NR_sched_setattr (__NR_SYSCALL_BASE + 380) +#define __NR_sched_getattr (__NR_SYSCALL_BASE + 381) +#define __NR_renameat2 (__NR_SYSCALL_BASE + 382) +#define __NR_seccomp (__NR_SYSCALL_BASE + 383) +#define __NR_getrandom (__NR_SYSCALL_BASE + 384) +#define __NR_memfd_create (__NR_SYSCALL_BASE + 385) +#define __NR_bpf (__NR_SYSCALL_BASE + 386) +#define __NR_execveat (__NR_SYSCALL_BASE + 387) +#define __NR_userfaultfd (__NR_SYSCALL_BASE + 388) +#define __NR_membarrier (__NR_SYSCALL_BASE + 389) +#define __NR_mlock2 (__NR_SYSCALL_BASE + 390) +#define __NR_copy_file_range (__NR_SYSCALL_BASE + 391) +#define __NR_preadv2 (__NR_SYSCALL_BASE + 392) +#define __NR_pwritev2 (__NR_SYSCALL_BASE + 393) +#define __NR_pkey_mprotect (__NR_SYSCALL_BASE + 394) +#define __NR_pkey_alloc (__NR_SYSCALL_BASE + 395) +#define __NR_pkey_free (__NR_SYSCALL_BASE + 396) + +#endif /* _ASM_ARM_UNISTD_COMMON_H */ diff --git a/linux-headers/asm-arm/unistd-eabi.h b/linux-headers/asm-arm/unistd-eabi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-eabi.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_EABI_H +#define _ASM_ARM_UNISTD_EABI_H 1 + + +#endif /* _ASM_ARM_UNISTD_EABI_H */ diff --git a/linux-headers/asm-arm/unistd-oabi.h b/linux-headers/asm-arm/unistd-oabi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-oabi.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_OABI_H +#define _ASM_ARM_UNISTD_OABI_H 1 + +#define __NR_time (__NR_SYSCALL_BASE + 13) +#define __NR_umount (__NR_SYSCALL_BASE + 22) +#define __NR_stime (__NR_SYSCALL_BASE + 25) +#define __NR_alarm (__NR_SYSCALL_BASE + 27) +#define __NR_utime (__NR_SYSCALL_BASE + 30) +#define __NR_getrlimit (__NR_SYSCALL_BASE + 76) +#define __NR_select (__NR_SYSCALL_BASE + 82) +#define __NR_readdir (__NR_SYSCALL_BASE + 89) +#define __NR_mmap (__NR_SYSCALL_BASE + 90) +#define __NR_socketcall (__NR_SYSCALL_BASE + 102) +#define __NR_syscall (__NR_SYSCALL_BASE + 113) +#define __NR_ipc (__NR_SYSCALL_BASE + 117) + +#endif /* _ASM_ARM_UNISTD_OABI_H */ diff --git a/linux-headers/asm-arm/unistd.h b/linux-headers/asm-arm/unistd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm/unistd.h +++ b/linux-headers/asm-arm/unistd.h @@ -XXX,XX +XXX,XX @@ #if defined(__thumb__) || defined(__ARM_EABI__) #define __NR_SYSCALL_BASE 0 +#include <asm/unistd-eabi.h> #else #define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE +#include <asm/unistd-oabi.h> #endif -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) -#define __NR_exit (__NR_SYSCALL_BASE+ 1) -#define __NR_fork (__NR_SYSCALL_BASE+ 2) -#define __NR_read (__NR_SYSCALL_BASE+ 3) -#define __NR_write (__NR_SYSCALL_BASE+ 4) -#define __NR_open (__NR_SYSCALL_BASE+ 5) -#define __NR_close (__NR_SYSCALL_BASE+ 6) - /* 7 was sys_waitpid */ -#define __NR_creat (__NR_SYSCALL_BASE+ 8) -#define __NR_link (__NR_SYSCALL_BASE+ 9) -#define __NR_unlink (__NR_SYSCALL_BASE+ 10) -#define __NR_execve (__NR_SYSCALL_BASE+ 11) -#define __NR_chdir (__NR_SYSCALL_BASE+ 12) -#define __NR_time (__NR_SYSCALL_BASE+ 13) -#define __NR_mknod (__NR_SYSCALL_BASE+ 14) -#define __NR_chmod (__NR_SYSCALL_BASE+ 15) -#define __NR_lchown (__NR_SYSCALL_BASE+ 16) - /* 17 was sys_break */ - /* 18 was sys_stat */ -#define __NR_lseek (__NR_SYSCALL_BASE+ 19) -#define __NR_getpid (__NR_SYSCALL_BASE+ 20) -#define __NR_mount (__NR_SYSCALL_BASE+ 21) -#define __NR_umount (__NR_SYSCALL_BASE+ 22) -#define __NR_setuid (__NR_SYSCALL_BASE+ 23) -#define __NR_getuid (__NR_SYSCALL_BASE+ 24) -#define __NR_stime (__NR_SYSCALL_BASE+ 25) -#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) -#define __NR_alarm (__NR_SYSCALL_BASE+ 27) - /* 28 was sys_fstat */ -#define __NR_pause (__NR_SYSCALL_BASE+ 29) -#define __NR_utime (__NR_SYSCALL_BASE+ 30) - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access (__NR_SYSCALL_BASE+ 33) -#define __NR_nice (__NR_SYSCALL_BASE+ 34) - /* 35 was sys_ftime */ -#define __NR_sync (__NR_SYSCALL_BASE+ 36) -#define __NR_kill (__NR_SYSCALL_BASE+ 37) -#define __NR_rename (__NR_SYSCALL_BASE+ 38) -#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) -#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) -#define __NR_dup (__NR_SYSCALL_BASE+ 41) -#define __NR_pipe (__NR_SYSCALL_BASE+ 42) -#define __NR_times (__NR_SYSCALL_BASE+ 43) - /* 44 was sys_prof */ -#define __NR_brk (__NR_SYSCALL_BASE+ 45) -#define __NR_setgid (__NR_SYSCALL_BASE+ 46) -#define __NR_getgid (__NR_SYSCALL_BASE+ 47) - /* 48 was sys_signal */ -#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) -#define __NR_getegid (__NR_SYSCALL_BASE+ 50) -#define __NR_acct (__NR_SYSCALL_BASE+ 51) -#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) - /* 53 was sys_lock */ -#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) -#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) - /* 56 was sys_mpx */ -#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask (__NR_SYSCALL_BASE+ 60) -#define __NR_chroot (__NR_SYSCALL_BASE+ 61) -#define __NR_ustat (__NR_SYSCALL_BASE+ 62) -#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) -#define __NR_getppid (__NR_SYSCALL_BASE+ 64) -#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) -#define __NR_setsid (__NR_SYSCALL_BASE+ 66) -#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) - /* 68 was sys_sgetmask */ - /* 69 was sys_ssetmask */ -#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) -#define __NR_setregid (__NR_SYSCALL_BASE+ 71) -#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) -#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) -#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) -#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) -#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ -#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) -#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) -#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) -#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) -#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) -#define __NR_select (__NR_SYSCALL_BASE+ 82) -#define __NR_symlink (__NR_SYSCALL_BASE+ 83) - /* 84 was sys_lstat */ -#define __NR_readlink (__NR_SYSCALL_BASE+ 85) -#define __NR_uselib (__NR_SYSCALL_BASE+ 86) -#define __NR_swapon (__NR_SYSCALL_BASE+ 87) -#define __NR_reboot (__NR_SYSCALL_BASE+ 88) -#define __NR_readdir (__NR_SYSCALL_BASE+ 89) -#define __NR_mmap (__NR_SYSCALL_BASE+ 90) -#define __NR_munmap (__NR_SYSCALL_BASE+ 91) -#define __NR_truncate (__NR_SYSCALL_BASE+ 92) -#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) -#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) -#define __NR_fchown (__NR_SYSCALL_BASE+ 95) -#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) -#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) - /* 98 was sys_profil */ -#define __NR_statfs (__NR_SYSCALL_BASE+ 99) -#define __NR_fstatfs (__NR_SYSCALL_BASE+100) - /* 101 was sys_ioperm */ -#define __NR_socketcall (__NR_SYSCALL_BASE+102) -#define __NR_syslog (__NR_SYSCALL_BASE+103) -#define __NR_setitimer (__NR_SYSCALL_BASE+104) -#define __NR_getitimer (__NR_SYSCALL_BASE+105) -#define __NR_stat (__NR_SYSCALL_BASE+106) -#define __NR_lstat (__NR_SYSCALL_BASE+107) -#define __NR_fstat (__NR_SYSCALL_BASE+108) - /* 109 was sys_uname */ - /* 110 was sys_iopl */ -#define __NR_vhangup (__NR_SYSCALL_BASE+111) - /* 112 was sys_idle */ -#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ -#define __NR_wait4 (__NR_SYSCALL_BASE+114) -#define __NR_swapoff (__NR_SYSCALL_BASE+115) -#define __NR_sysinfo (__NR_SYSCALL_BASE+116) -#define __NR_ipc (__NR_SYSCALL_BASE+117) -#define __NR_fsync (__NR_SYSCALL_BASE+118) -#define __NR_sigreturn (__NR_SYSCALL_BASE+119) -#define __NR_clone (__NR_SYSCALL_BASE+120) -#define __NR_setdomainname (__NR_SYSCALL_BASE+121) -#define __NR_uname (__NR_SYSCALL_BASE+122) - /* 123 was sys_modify_ldt */ -#define __NR_adjtimex (__NR_SYSCALL_BASE+124) -#define __NR_mprotect (__NR_SYSCALL_BASE+125) -#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) - /* 127 was sys_create_module */ -#define __NR_init_module (__NR_SYSCALL_BASE+128) -#define __NR_delete_module (__NR_SYSCALL_BASE+129) - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl (__NR_SYSCALL_BASE+131) -#define __NR_getpgid (__NR_SYSCALL_BASE+132) -#define __NR_fchdir (__NR_SYSCALL_BASE+133) -#define __NR_bdflush (__NR_SYSCALL_BASE+134) -#define __NR_sysfs (__NR_SYSCALL_BASE+135) -#define __NR_personality (__NR_SYSCALL_BASE+136) - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid (__NR_SYSCALL_BASE+138) -#define __NR_setfsgid (__NR_SYSCALL_BASE+139) -#define __NR__llseek (__NR_SYSCALL_BASE+140) -#define __NR_getdents (__NR_SYSCALL_BASE+141) -#define __NR__newselect (__NR_SYSCALL_BASE+142) -#define __NR_flock (__NR_SYSCALL_BASE+143) -#define __NR_msync (__NR_SYSCALL_BASE+144) -#define __NR_readv (__NR_SYSCALL_BASE+145) -#define __NR_writev (__NR_SYSCALL_BASE+146) -#define __NR_getsid (__NR_SYSCALL_BASE+147) -#define __NR_fdatasync (__NR_SYSCALL_BASE+148) -#define __NR__sysctl (__NR_SYSCALL_BASE+149) -#define __NR_mlock (__NR_SYSCALL_BASE+150) -#define __NR_munlock (__NR_SYSCALL_BASE+151) -#define __NR_mlockall (__NR_SYSCALL_BASE+152) -#define __NR_munlockall (__NR_SYSCALL_BASE+153) -#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) -#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) -#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) -#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) -#define __NR_sched_yield (__NR_SYSCALL_BASE+158) -#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) -#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) -#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) -#define __NR_nanosleep (__NR_SYSCALL_BASE+162) -#define __NR_mremap (__NR_SYSCALL_BASE+163) -#define __NR_setresuid (__NR_SYSCALL_BASE+164) -#define __NR_getresuid (__NR_SYSCALL_BASE+165) - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll (__NR_SYSCALL_BASE+168) -#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) -#define __NR_setresgid (__NR_SYSCALL_BASE+170) -#define __NR_getresgid (__NR_SYSCALL_BASE+171) -#define __NR_prctl (__NR_SYSCALL_BASE+172) -#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) -#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) -#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) -#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) -#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) -#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) -#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) -#define __NR_pread64 (__NR_SYSCALL_BASE+180) -#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) -#define __NR_chown (__NR_SYSCALL_BASE+182) -#define __NR_getcwd (__NR_SYSCALL_BASE+183) -#define __NR_capget (__NR_SYSCALL_BASE+184) -#define __NR_capset (__NR_SYSCALL_BASE+185) -#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) -#define __NR_sendfile (__NR_SYSCALL_BASE+187) - /* 188 reserved */ - /* 189 reserved */ -#define __NR_vfork (__NR_SYSCALL_BASE+190) -#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ -#define __NR_mmap2 (__NR_SYSCALL_BASE+192) -#define __NR_truncate64 (__NR_SYSCALL_BASE+193) -#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) -#define __NR_stat64 (__NR_SYSCALL_BASE+195) -#define __NR_lstat64 (__NR_SYSCALL_BASE+196) -#define __NR_fstat64 (__NR_SYSCALL_BASE+197) -#define __NR_lchown32 (__NR_SYSCALL_BASE+198) -#define __NR_getuid32 (__NR_SYSCALL_BASE+199) -#define __NR_getgid32 (__NR_SYSCALL_BASE+200) -#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) -#define __NR_getegid32 (__NR_SYSCALL_BASE+202) -#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) -#define __NR_setregid32 (__NR_SYSCALL_BASE+204) -#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) -#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) -#define __NR_fchown32 (__NR_SYSCALL_BASE+207) -#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) -#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) -#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) -#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) -#define __NR_chown32 (__NR_SYSCALL_BASE+212) -#define __NR_setuid32 (__NR_SYSCALL_BASE+213) -#define __NR_setgid32 (__NR_SYSCALL_BASE+214) -#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) -#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) -#define __NR_getdents64 (__NR_SYSCALL_BASE+217) -#define __NR_pivot_root (__NR_SYSCALL_BASE+218) -#define __NR_mincore (__NR_SYSCALL_BASE+219) -#define __NR_madvise (__NR_SYSCALL_BASE+220) -#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) - /* 222 for tux */ - /* 223 is unused */ -#define __NR_gettid (__NR_SYSCALL_BASE+224) -#define __NR_readahead (__NR_SYSCALL_BASE+225) -#define __NR_setxattr (__NR_SYSCALL_BASE+226) -#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) -#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) -#define __NR_getxattr (__NR_SYSCALL_BASE+229) -#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) -#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) -#define __NR_listxattr (__NR_SYSCALL_BASE+232) -#define __NR_llistxattr (__NR_SYSCALL_BASE+233) -#define __NR_flistxattr (__NR_SYSCALL_BASE+234) -#define __NR_removexattr (__NR_SYSCALL_BASE+235) -#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) -#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) -#define __NR_tkill (__NR_SYSCALL_BASE+238) -#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) -#define __NR_futex (__NR_SYSCALL_BASE+240) -#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) -#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) -#define __NR_io_setup (__NR_SYSCALL_BASE+243) -#define __NR_io_destroy (__NR_SYSCALL_BASE+244) -#define __NR_io_getevents (__NR_SYSCALL_BASE+245) -#define __NR_io_submit (__NR_SYSCALL_BASE+246) -#define __NR_io_cancel (__NR_SYSCALL_BASE+247) -#define __NR_exit_group (__NR_SYSCALL_BASE+248) -#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) -#define __NR_epoll_create (__NR_SYSCALL_BASE+250) -#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) -#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) -#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) - /* 254 for set_thread_area */ - /* 255 for get_thread_area */ -#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) -#define __NR_timer_create (__NR_SYSCALL_BASE+257) -#define __NR_timer_settime (__NR_SYSCALL_BASE+258) -#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) -#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) -#define __NR_timer_delete (__NR_SYSCALL_BASE+261) -#define __NR_clock_settime (__NR_SYSCALL_BASE+262) -#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) -#define __NR_clock_getres (__NR_SYSCALL_BASE+264) -#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) -#define __NR_statfs64 (__NR_SYSCALL_BASE+266) -#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) -#define __NR_tgkill (__NR_SYSCALL_BASE+268) -#define __NR_utimes (__NR_SYSCALL_BASE+269) -#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) -#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) -#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) -#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) -#define __NR_mq_open (__NR_SYSCALL_BASE+274) -#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) -#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) -#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) -#define __NR_mq_notify (__NR_SYSCALL_BASE+278) -#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) -#define __NR_waitid (__NR_SYSCALL_BASE+280) -#define __NR_socket (__NR_SYSCALL_BASE+281) -#define __NR_bind (__NR_SYSCALL_BASE+282) -#define __NR_connect (__NR_SYSCALL_BASE+283) -#define __NR_listen (__NR_SYSCALL_BASE+284) -#define __NR_accept (__NR_SYSCALL_BASE+285) -#define __NR_getsockname (__NR_SYSCALL_BASE+286) -#define __NR_getpeername (__NR_SYSCALL_BASE+287) -#define __NR_socketpair (__NR_SYSCALL_BASE+288) -#define __NR_send (__NR_SYSCALL_BASE+289) -#define __NR_sendto (__NR_SYSCALL_BASE+290) -#define __NR_recv (__NR_SYSCALL_BASE+291) -#define __NR_recvfrom (__NR_SYSCALL_BASE+292) -#define __NR_shutdown (__NR_SYSCALL_BASE+293) -#define __NR_setsockopt (__NR_SYSCALL_BASE+294) -#define __NR_getsockopt (__NR_SYSCALL_BASE+295) -#define __NR_sendmsg (__NR_SYSCALL_BASE+296) -#define __NR_recvmsg (__NR_SYSCALL_BASE+297) -#define __NR_semop (__NR_SYSCALL_BASE+298) -#define __NR_semget (__NR_SYSCALL_BASE+299) -#define __NR_semctl (__NR_SYSCALL_BASE+300) -#define __NR_msgsnd (__NR_SYSCALL_BASE+301) -#define __NR_msgrcv (__NR_SYSCALL_BASE+302) -#define __NR_msgget (__NR_SYSCALL_BASE+303) -#define __NR_msgctl (__NR_SYSCALL_BASE+304) -#define __NR_shmat (__NR_SYSCALL_BASE+305) -#define __NR_shmdt (__NR_SYSCALL_BASE+306) -#define __NR_shmget (__NR_SYSCALL_BASE+307) -#define __NR_shmctl (__NR_SYSCALL_BASE+308) -#define __NR_add_key (__NR_SYSCALL_BASE+309) -#define __NR_request_key (__NR_SYSCALL_BASE+310) -#define __NR_keyctl (__NR_SYSCALL_BASE+311) -#define __NR_semtimedop (__NR_SYSCALL_BASE+312) -#define __NR_vserver (__NR_SYSCALL_BASE+313) -#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) -#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) -#define __NR_inotify_init (__NR_SYSCALL_BASE+316) -#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) -#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) -#define __NR_mbind (__NR_SYSCALL_BASE+319) -#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) -#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) -#define __NR_openat (__NR_SYSCALL_BASE+322) -#define __NR_mkdirat (__NR_SYSCALL_BASE+323) -#define __NR_mknodat (__NR_SYSCALL_BASE+324) -#define __NR_fchownat (__NR_SYSCALL_BASE+325) -#define __NR_futimesat (__NR_SYSCALL_BASE+326) -#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) -#define __NR_unlinkat (__NR_SYSCALL_BASE+328) -#define __NR_renameat (__NR_SYSCALL_BASE+329) -#define __NR_linkat (__NR_SYSCALL_BASE+330) -#define __NR_symlinkat (__NR_SYSCALL_BASE+331) -#define __NR_readlinkat (__NR_SYSCALL_BASE+332) -#define __NR_fchmodat (__NR_SYSCALL_BASE+333) -#define __NR_faccessat (__NR_SYSCALL_BASE+334) -#define __NR_pselect6 (__NR_SYSCALL_BASE+335) -#define __NR_ppoll (__NR_SYSCALL_BASE+336) -#define __NR_unshare (__NR_SYSCALL_BASE+337) -#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) -#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) -#define __NR_splice (__NR_SYSCALL_BASE+340) -#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) +#include <asm/unistd-common.h> #define __NR_sync_file_range2 __NR_arm_sync_file_range -#define __NR_tee (__NR_SYSCALL_BASE+342) -#define __NR_vmsplice (__NR_SYSCALL_BASE+343) -#define __NR_move_pages (__NR_SYSCALL_BASE+344) -#define __NR_getcpu (__NR_SYSCALL_BASE+345) -#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346) -#define __NR_kexec_load (__NR_SYSCALL_BASE+347) -#define __NR_utimensat (__NR_SYSCALL_BASE+348) -#define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) -#define __NR_eventfd (__NR_SYSCALL_BASE+351) -#define __NR_fallocate (__NR_SYSCALL_BASE+352) -#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) -#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) -#define __NR_signalfd4 (__NR_SYSCALL_BASE+355) -#define __NR_eventfd2 (__NR_SYSCALL_BASE+356) -#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357) -#define __NR_dup3 (__NR_SYSCALL_BASE+358) -#define __NR_pipe2 (__NR_SYSCALL_BASE+359) -#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) -#define __NR_preadv (__NR_SYSCALL_BASE+361) -#define __NR_pwritev (__NR_SYSCALL_BASE+362) -#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363) -#define __NR_perf_event_open (__NR_SYSCALL_BASE+364) -#define __NR_recvmmsg (__NR_SYSCALL_BASE+365) -#define __NR_accept4 (__NR_SYSCALL_BASE+366) -#define __NR_fanotify_init (__NR_SYSCALL_BASE+367) -#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) -#define __NR_prlimit64 (__NR_SYSCALL_BASE+369) -#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) -#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) -#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) -#define __NR_syncfs (__NR_SYSCALL_BASE+373) -#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) -#define __NR_setns (__NR_SYSCALL_BASE+375) -#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) -#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) -#define __NR_kcmp (__NR_SYSCALL_BASE+378) -#define __NR_finit_module (__NR_SYSCALL_BASE+379) -#define __NR_sched_setattr (__NR_SYSCALL_BASE+380) -#define __NR_sched_getattr (__NR_SYSCALL_BASE+381) -#define __NR_renameat2 (__NR_SYSCALL_BASE+382) -#define __NR_seccomp (__NR_SYSCALL_BASE+383) -#define __NR_getrandom (__NR_SYSCALL_BASE+384) -#define __NR_memfd_create (__NR_SYSCALL_BASE+385) -#define __NR_bpf (__NR_SYSCALL_BASE+386) -#define __NR_execveat (__NR_SYSCALL_BASE+387) -#define __NR_userfaultfd (__NR_SYSCALL_BASE+388) -#define __NR_membarrier (__NR_SYSCALL_BASE+389) -#define __NR_mlock2 (__NR_SYSCALL_BASE+390) -#define __NR_copy_file_range (__NR_SYSCALL_BASE+391) -#define __NR_preadv2 (__NR_SYSCALL_BASE+392) -#define __NR_pwritev2 (__NR_SYSCALL_BASE+393) /* * The following SWIs are ARM private. @@ -XXX,XX +XXX,XX @@ #define __ARM_NR_usr32 (__ARM_NR_BASE+4) #define __ARM_NR_set_tls (__ARM_NR_BASE+5) -/* - * The following syscalls are obsolete and no longer available for EABI. - */ -#if defined(__ARM_EABI__) -#undef __NR_time -#undef __NR_umount -#undef __NR_stime -#undef __NR_alarm -#undef __NR_utime -#undef __NR_getrlimit -#undef __NR_select -#undef __NR_readdir -#undef __NR_mmap -#undef __NR_socketcall -#undef __NR_syscall -#undef __NR_ipc -#endif - #endif /* __ASM_ARM_UNISTD_H */ diff --git a/linux-headers/asm-arm64/kvm.h b/linux-headers/asm-arm64/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm64/kvm.h +++ b/linux-headers/asm-arm64/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 #define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 +#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ + (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) #define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 #define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 +#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 +#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ + (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff +#define VGIC_LEVEL_INFO_LINE_LEVEL 0 + #define KVM_DEV_ARM_VGIC_CTRL_INIT 0 /* Device Control API on vcpu fd */ diff --git a/linux-headers/asm-powerpc/kvm.h b/linux-headers/asm-powerpc/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/kvm.h +++ b/linux-headers/asm-powerpc/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { __u16 n_invalid; }; +/* For KVM_PPC_CONFIGURE_V3_MMU */ +struct kvm_ppc_mmuv3_cfg { + __u64 flags; + __u64 process_table; /* second doubleword of partition table entry */ +}; + +/* Flag values for KVM_PPC_CONFIGURE_V3_MMU */ +#define KVM_PPC_MMUV3_RADIX 1 /* 1 = radix mode, 0 = HPT */ +#define KVM_PPC_MMUV3_GTSE 2 /* global translation shootdown enb. */ + +/* For KVM_PPC_GET_RMMU_INFO */ +struct kvm_ppc_rmmu_info { + struct kvm_ppc_radix_geom { + __u8 page_shift; + __u8 level_bits[4]; + __u8 pad[3]; + } geometries[8]; + __u32 ap_encodings[8]; +}; + /* Per-vcpu XICS interrupt controller state */ #define KVM_REG_PPC_ICP_STATE (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8c) @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_REG_PPC_SPRG9 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xba) #define KVM_REG_PPC_DBSR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbb) +/* POWER9 registers */ +#define KVM_REG_PPC_TIDR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbc) +#define KVM_REG_PPC_PSSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd) + /* Transactional Memory checkpointed state: * This is all GPRs, all VSX regs and a subset of SPRs */ @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_REG_PPC_TM_VSCR (KVM_REG_PPC_TM | KVM_REG_SIZE_U32 | 0x67) #define KVM_REG_PPC_TM_DSCR (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x68) #define KVM_REG_PPC_TM_TAR (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x69) +#define KVM_REG_PPC_TM_XER (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x6a) /* PPC64 eXternal Interrupt Controller Specification */ #define KVM_DEV_XICS_GRP_SOURCES 1 /* 64-bit source attributes */ @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_XICS_LEVEL_SENSITIVE (1ULL << 40) #define KVM_XICS_MASKED (1ULL << 41) #define KVM_XICS_PENDING (1ULL << 42) +#define KVM_XICS_PRESENTED (1ULL << 43) +#define KVM_XICS_QUEUED (1ULL << 44) #endif /* __LINUX_KVM_POWERPC_H */ diff --git a/linux-headers/asm-powerpc/unistd.h b/linux-headers/asm-powerpc/unistd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/unistd.h +++ b/linux-headers/asm-powerpc/unistd.h @@ -XXX,XX +XXX,XX @@ #define __NR_copy_file_range 379 #define __NR_preadv2 380 #define __NR_pwritev2 381 +#define __NR_kexec_file_load 382 #endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/linux-headers/asm-x86/kvm_para.h b/linux-headers/asm-x86/kvm_para.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-x86/kvm_para.h +++ b/linux-headers/asm-x86/kvm_para.h @@ -XXX,XX +XXX,XX @@ struct kvm_steal_time { __u64 steal; __u32 version; __u32 flags; - __u32 pad[12]; + __u8 preempted; + __u8 u8_pad[3]; + __u32 pad[11]; +}; + +#define KVM_CLOCK_PAIRING_WALLCLOCK 0 +struct kvm_clock_pairing { + __s64 sec; + __s64 nsec; + __u64 tsc; + __u32 flags; + __u32 pad[9]; }; #define KVM_STEAL_ALIGNMENT_BITS 5 diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/kvm.h +++ b/linux-headers/linux/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_hyperv_exit { struct kvm_run { /* in */ __u8 request_interrupt_window; - __u8 padding1[7]; + __u8 immediate_exit; + __u8 padding1[6]; /* out */ __u32 exit_reason; @@ -XXX,XX +XXX,XX @@ struct kvm_enable_cap { }; /* for KVM_PPC_GET_PVINFO */ + +#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) + struct kvm_ppc_pvinfo { /* out */ __u32 flags; @@ -XXX,XX +XXX,XX @@ struct kvm_ppc_smmu_info { struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; }; -#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) +/* for KVM_PPC_RESIZE_HPT_{PREPARE,COMMIT} */ +struct kvm_ppc_resize_hpt { + __u64 flags; + __u32 shift; + __u32 pad; +}; #define KVMIO 0xAE @@ -XXX,XX +XXX,XX @@ struct kvm_ppc_smmu_info { #define KVM_CAP_S390_USER_INSTR0 130 #define KVM_CAP_MSI_DEVID 131 #define KVM_CAP_PPC_HTM 132 +#define KVM_CAP_SPAPR_RESIZE_HPT 133 +#define KVM_CAP_PPC_MMU_RADIX 134 +#define KVM_CAP_PPC_MMU_HASH_V3 135 +#define KVM_CAP_IMMEDIATE_EXIT 136 #ifdef KVM_CAP_IRQ_ROUTING @@ -XXX,XX +XXX,XX @@ struct kvm_s390_ucas_mapping { #define KVM_ARM_SET_DEVICE_ADDR _IOW(KVMIO, 0xab, struct kvm_arm_device_addr) /* Available with KVM_CAP_PPC_RTAS */ #define KVM_PPC_RTAS_DEFINE_TOKEN _IOW(KVMIO, 0xac, struct kvm_rtas_token_args) +/* Available with KVM_CAP_SPAPR_RESIZE_HPT */ +#define KVM_PPC_RESIZE_HPT_PREPARE _IOR(KVMIO, 0xad, struct kvm_ppc_resize_hpt) +#define KVM_PPC_RESIZE_HPT_COMMIT _IOR(KVMIO, 0xae, struct kvm_ppc_resize_hpt) +/* Available with KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 */ +#define KVM_PPC_CONFIGURE_V3_MMU _IOW(KVMIO, 0xaf, struct kvm_ppc_mmuv3_cfg) +/* Available with KVM_CAP_PPC_RADIX_MMU */ +#define KVM_PPC_GET_RMMU_INFO _IOW(KVMIO, 0xb0, struct kvm_ppc_rmmu_info) /* ioctl for vm fd */ #define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) diff --git a/linux-headers/linux/kvm_para.h b/linux-headers/linux/kvm_para.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/kvm_para.h +++ b/linux-headers/linux/kvm_para.h @@ -XXX,XX +XXX,XX @@ #define KVM_EFAULT EFAULT #define KVM_E2BIG E2BIG #define KVM_EPERM EPERM +#define KVM_EOPNOTSUPP 95 #define KVM_HC_VAPIC_POLL_IRQ 1 #define KVM_HC_MMU_OP 2 @@ -XXX,XX +XXX,XX @@ #define KVM_HC_MIPS_GET_CLOCK_FREQ 6 #define KVM_HC_MIPS_EXIT_VM 7 #define KVM_HC_MIPS_CONSOLE_OUTPUT 8 +#define KVM_HC_CLOCK_PAIRING 9 /* * hypercalls use architecture specific diff --git a/linux-headers/linux/userfaultfd.h b/linux-headers/linux/userfaultfd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/userfaultfd.h +++ b/linux-headers/linux/userfaultfd.h @@ -XXX,XX +XXX,XX @@ #include <linux/types.h> -#define UFFD_API ((__u64)0xAA) /* - * After implementing the respective features it will become: - * #define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | \ - * UFFD_FEATURE_EVENT_FORK) + * If the UFFDIO_API is upgraded someday, the UFFDIO_UNREGISTER and + * UFFDIO_WAKE ioctls should be defined as _IOW and not as _IOR. In + * userfaultfd.h we assumed the kernel was reading (instead _IOC_READ + * means the userland is reading). */ -#define UFFD_API_FEATURES (0) +#define UFFD_API ((__u64)0xAA) +#define UFFD_API_FEATURES (UFFD_FEATURE_EVENT_FORK | \ + UFFD_FEATURE_EVENT_REMAP | \ + UFFD_FEATURE_EVENT_MADVDONTNEED | \ + UFFD_FEATURE_MISSING_HUGETLBFS | \ + UFFD_FEATURE_MISSING_SHMEM) #define UFFD_API_IOCTLS \ ((__u64)1 << _UFFDIO_REGISTER | \ (__u64)1 << _UFFDIO_UNREGISTER | \ @@ -XXX,XX +XXX,XX @@ ((__u64)1 << _UFFDIO_WAKE | \ (__u64)1 << _UFFDIO_COPY | \ (__u64)1 << _UFFDIO_ZEROPAGE) +#define UFFD_API_RANGE_IOCTLS_BASIC \ + ((__u64)1 << _UFFDIO_WAKE | \ + (__u64)1 << _UFFDIO_COPY) /* * Valid ioctl command number range with this API is from 0x00 to @@ -XXX,XX +XXX,XX @@ struct uffd_msg { } pagefault; struct { + __u32 ufd; + } fork; + + struct { + __u64 from; + __u64 to; + __u64 len; + } remap; + + struct { + __u64 start; + __u64 end; + } madv_dn; + + struct { /* unused reserved fields */ __u64 reserved1; __u64 reserved2; @@ -XXX,XX +XXX,XX @@ struct uffd_msg { * Start at 0x12 and not at 0 to be more strict against bugs. */ #define UFFD_EVENT_PAGEFAULT 0x12 -#if 0 /* not available yet */ #define UFFD_EVENT_FORK 0x13 -#endif +#define UFFD_EVENT_REMAP 0x14 +#define UFFD_EVENT_MADVDONTNEED 0x15 /* flags for UFFD_EVENT_PAGEFAULT */ #define UFFD_PAGEFAULT_FLAG_WRITE (1<<0) /* If this was a write fault */ @@ -XXX,XX +XXX,XX @@ struct uffdio_api { * Note: UFFD_EVENT_PAGEFAULT and UFFD_PAGEFAULT_FLAG_WRITE * are to be considered implicitly always enabled in all kernels as * long as the uffdio_api.api requested matches UFFD_API. + * + * UFFD_FEATURE_MISSING_HUGETLBFS means an UFFDIO_REGISTER + * with UFFDIO_REGISTER_MODE_MISSING mode will succeed on + * hugetlbfs virtual memory ranges. Adding or not adding + * UFFD_FEATURE_MISSING_HUGETLBFS to uffdio_api.features has + * no real functional effect after UFFDIO_API returns, but + * it's only useful for an initial feature set probe at + * UFFDIO_API time. There are two ways to use it: + * + * 1) by adding UFFD_FEATURE_MISSING_HUGETLBFS to the + * uffdio_api.features before calling UFFDIO_API, an error + * will be returned by UFFDIO_API on a kernel without + * hugetlbfs missing support + * + * 2) the UFFD_FEATURE_MISSING_HUGETLBFS can not be added in + * uffdio_api.features and instead it will be set by the + * kernel in the uffdio_api.features if the kernel supports + * it, so userland can later check if the feature flag is + * present in uffdio_api.features after UFFDIO_API + * succeeded. + * + * UFFD_FEATURE_MISSING_SHMEM works the same as + * UFFD_FEATURE_MISSING_HUGETLBFS, but it applies to shmem + * (i.e. tmpfs and other shmem based APIs). */ -#if 0 /* not available yet */ #define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0) #define UFFD_FEATURE_EVENT_FORK (1<<1) -#endif +#define UFFD_FEATURE_EVENT_REMAP (1<<2) +#define UFFD_FEATURE_EVENT_MADVDONTNEED (1<<3) +#define UFFD_FEATURE_MISSING_HUGETLBFS (1<<4) +#define UFFD_FEATURE_MISSING_SHMEM (1<<5) __u64 features; __u64 ioctls; diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/vfio.h +++ b/linux-headers/linux/vfio.h @@ -XXX,XX +XXX,XX @@ struct vfio_device_info { }; #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) +/* + * Vendor driver using Mediated device framework should provide device_api + * attribute in supported type attribute groups. Device API string should be one + * of the following corresponding to device flags in vfio_device_info structure. + */ + +#define VFIO_DEVICE_API_PCI_STRING "vfio-pci" +#define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform" +#define VFIO_DEVICE_API_AMBA_STRING "vfio-amba" + /** * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, * struct vfio_region_info) -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> To Save and Restore ICC_SRE_EL1 register introduce vmstate subsection and load only if non-zero. Also initialize icc_sre_el1 with to 0x7 in pre_load function. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-3-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gicv3_common.h | 1 + hw/intc/arm_gicv3_common.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { uint8_t gicr_ipriorityr[GIC_INTERNAL]; /* CPU interface */ + uint64_t icc_sre_el1; uint64_t icc_ctlr_el1[2]; uint64_t icc_pmr_el1; uint64_t icc_bpr[3]; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu_virt = { } }; +static int icc_sre_el1_reg_pre_load(void *opaque) +{ + GICv3CPUState *cs = opaque; + + /* + * If the sre_el1 subsection is not transferred this + * means SRE_EL1 is 0x7 (which might not be the same as + * our reset value). + */ + cs->icc_sre_el1 = 0x7; + return 0; +} + +static bool icc_sre_el1_reg_needed(void *opaque) +{ + GICv3CPUState *cs = opaque; + + return cs->icc_sre_el1 != 7; +} + +const VMStateDescription vmstate_gicv3_cpu_sre_el1 = { + .name = "arm_gicv3_cpu/sre_el1", + .version_id = 1, + .minimum_version_id = 1, + .pre_load = icc_sre_el1_reg_pre_load, + .needed = icc_sre_el1_reg_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT64(icc_sre_el1, GICv3CPUState), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3_cpu = { .name = "arm_gicv3_cpu", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu = { .subsections = (const VMStateDescription * []) { &vmstate_gicv3_cpu_virt, NULL + }, + .subsections = (const VMStateDescription * []) { + &vmstate_gicv3_cpu_sre_el1, + NULL } }; -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> This actually implements pre_save and post_load methods for in-kernel vGICv3. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Message-id: 1487850673-26455-4-git-send-email-vijay.kilari@gmail.com [PMM: * use decimal, not 0bnnn * fixed typo in names of ICC_APR0R_EL1 and ICC_AP1R_EL1 * completely rearranged the get and put functions to read and write the state in a natural order, rather than mixing distributor and redistributor state together] Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> [Vijay: * Update macro KVM_VGIC_ATTR * Use 32 bit access for gicd and gicr * GICD_IROUTER, GICD_TYPER, GICR_PROPBASER and GICR_PENDBASER reg access are changed from 64-bit to 32-bit access * Add ICC_SRE_EL1 save and restore * Dropped translate_fn mechanism and coded functions to handle save and restore of edge_trigger and priority * Number of APnR register saved/restored based on number of priority bits supported] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 1 + hw/intc/arm_gicv3_kvm.c | 573 +++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 558 insertions(+), 16 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define ICC_CTLR_EL1_EOIMODE (1U << 1) #define ICC_CTLR_EL1_PMHE (1U << 6) #define ICC_CTLR_EL1_PRIBITS_SHIFT 8 +#define ICC_CTLR_EL1_PRIBITS_MASK (7U << ICC_CTLR_EL1_PRIBITS_SHIFT) #define ICC_CTLR_EL1_IDBITS_SHIFT 11 #define ICC_CTLR_EL1_SEIS (1U << 14) #define ICC_CTLR_EL1_A3V (1U << 15) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/sysbus.h" +#include "qemu/error-report.h" #include "sysemu/kvm.h" #include "kvm_arm.h" +#include "gicv3_internal.h" #include "vgic_common.h" #include "migration/migration.h" @@ -XXX,XX +XXX,XX @@ #define KVM_ARM_GICV3_GET_CLASS(obj) \ OBJECT_GET_CLASS(KVMARMGICv3Class, (obj), TYPE_KVM_ARM_GICV3) +#define KVM_DEV_ARM_VGIC_SYSREG(op0, op1, crn, crm, op2) \ + (ARM64_SYS_REG_SHIFT_MASK(op0, OP0) | \ + ARM64_SYS_REG_SHIFT_MASK(op1, OP1) | \ + ARM64_SYS_REG_SHIFT_MASK(crn, CRN) | \ + ARM64_SYS_REG_SHIFT_MASK(crm, CRM) | \ + ARM64_SYS_REG_SHIFT_MASK(op2, OP2)) + +#define ICC_PMR_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 4, 6, 0) +#define ICC_BPR0_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 8, 3) +#define ICC_AP0R_EL1(n) \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 8, 4 | n) +#define ICC_AP1R_EL1(n) \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 9, n) +#define ICC_BPR1_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 3) +#define ICC_CTLR_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 4) +#define ICC_SRE_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 5) +#define ICC_IGRPEN0_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 6) +#define ICC_IGRPEN1_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 7) + typedef struct KVMARMGICv3Class { ARMGICv3CommonClass parent_class; DeviceRealize parent_realize; @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_set_irq(void *opaque, int irq, int level) kvm_arm_gic_set_irq(s->num_irq, irq, level); } +#define KVM_VGIC_ATTR(reg, typer) \ + ((typer & KVM_DEV_ARM_VGIC_V3_MPIDR_MASK) | (reg)) + +static inline void kvm_gicd_access(GICv3State *s, int offset, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, + KVM_VGIC_ATTR(offset, 0), + val, write); +} + +static inline void kvm_gicr_access(GICv3State *s, int offset, int cpu, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS, + KVM_VGIC_ATTR(offset, s->cpu[cpu].gicr_typer), + val, write); +} + +static inline void kvm_gicc_access(GICv3State *s, uint64_t reg, int cpu, + uint64_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, + KVM_VGIC_ATTR(reg, s->cpu[cpu].gicr_typer), + val, write); +} + +static inline void kvm_gic_line_level_access(GICv3State *s, int irq, int cpu, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO, + KVM_VGIC_ATTR(irq, s->cpu[cpu].gicr_typer) | + (VGIC_LEVEL_INFO_LINE_LEVEL << + KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT), + val, write); +} + +/* Loop through each distributor IRQ related register; since bits + * corresponding to SPIs and PPIs are RAZ/WI when affinity routing + * is enabled, we skip those. + */ +#define for_each_dist_irq_reg(_irq, _max, _field_width) \ + for (_irq = GIC_INTERNAL; _irq < _max; _irq += (32 / _field_width)) + +static void kvm_dist_get_priority(GICv3State *s, uint32_t offset, uint8_t *bmp) +{ + uint32_t reg, *field; + int irq; + + field = (uint32_t *)bmp; + for_each_dist_irq_reg(irq, s->num_irq, 8) { + kvm_gicd_access(s, offset, &reg, false); + *field = reg; + offset += 4; + field++; + } +} + +static void kvm_dist_put_priority(GICv3State *s, uint32_t offset, uint8_t *bmp) +{ + uint32_t reg, *field; + int irq; + + field = (uint32_t *)bmp; + for_each_dist_irq_reg(irq, s->num_irq, 8) { + reg = *field; + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + field++; + } +} + +static void kvm_dist_get_edge_trigger(GICv3State *s, uint32_t offset, + uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 2) { + kvm_gicd_access(s, offset, &reg, false); + reg = half_unshuffle32(reg >> 1); + if (irq % 32 != 0) { + reg = (reg << 16); + } + *gic_bmp_ptr32(bmp, irq) |= reg; + offset += 4; + } +} + +static void kvm_dist_put_edge_trigger(GICv3State *s, uint32_t offset, + uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 2) { + reg = *gic_bmp_ptr32(bmp, irq); + if (irq % 32 != 0) { + reg = (reg & 0xffff0000) >> 16; + } else { + reg = reg & 0xffff; + } + reg = half_shuffle32(reg) << 1; + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + } +} + +static void kvm_gic_get_line_level_bmp(GICv3State *s, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + kvm_gic_line_level_access(s, irq, 0, &reg, false); + *gic_bmp_ptr32(bmp, irq) = reg; + } +} + +static void kvm_gic_put_line_level_bmp(GICv3State *s, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + reg = *gic_bmp_ptr32(bmp, irq); + kvm_gic_line_level_access(s, irq, 0, &reg, true); + } +} + +/* Read a bitmap register group from the kernel VGIC. */ +static void kvm_dist_getbmp(GICv3State *s, uint32_t offset, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + kvm_gicd_access(s, offset, &reg, false); + *gic_bmp_ptr32(bmp, irq) = reg; + offset += 4; + } +} + +static void kvm_dist_putbmp(GICv3State *s, uint32_t offset, + uint32_t clroffset, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + /* If this bitmap is a set/clear register pair, first write to the + * clear-reg to clear all bits before using the set-reg to write + * the 1 bits. + */ + if (clroffset != 0) { + reg = 0; + kvm_gicd_access(s, clroffset, &reg, true); + } + reg = *gic_bmp_ptr32(bmp, irq); + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + } +} + +static void kvm_arm_gicv3_check(GICv3State *s) +{ + uint32_t reg; + uint32_t num_irq; + + /* Sanity checking s->num_irq */ + kvm_gicd_access(s, GICD_TYPER, &reg, false); + num_irq = ((reg & 0x1f) + 1) * 32; + + if (num_irq < s->num_irq) { + error_report("Model requests %u IRQs, but kernel supports max %u", + s->num_irq, num_irq); + abort(); + } +} + static void kvm_arm_gicv3_put(GICv3State *s) { - /* TODO */ - DPRINTF("Cannot put kernel gic state, no kernel interface\n"); + uint32_t regl, regh, reg; + uint64_t reg64, redist_typer; + int ncpu, i; + + kvm_arm_gicv3_check(s); + + kvm_gicr_access(s, GICR_TYPER, 0, &regl, false); + kvm_gicr_access(s, GICR_TYPER + 4, 0, &regh, false); + redist_typer = ((uint64_t)regh << 32) | regl; + + reg = s->gicd_ctlr; + kvm_gicd_access(s, GICD_CTLR, &reg, true); + + if (redist_typer & GICR_TYPER_PLPIS) { + /* Set base addresses before LPIs are enabled by GICR_CTLR write */ + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + reg64 = c->gicr_propbaser; + regl = (uint32_t)reg64; + kvm_gicr_access(s, GICR_PROPBASER, ncpu, &regl, true); + regh = (uint32_t)(reg64 >> 32); + kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, true); + + reg64 = c->gicr_pendbaser; + if (!c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) { + /* Setting PTZ is advised if LPIs are disabled, to reduce + * GIC initialization time. + */ + reg64 |= GICR_PENDBASER_PTZ; + } + regl = (uint32_t)reg64; + kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, true); + regh = (uint32_t)(reg64 >> 32); + kvm_gicr_access(s, GICR_PENDBASER + 4, ncpu, &regh, true); + } + } + + /* Redistributor state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + reg = c->gicr_ctlr; + kvm_gicr_access(s, GICR_CTLR, ncpu, &reg, true); + + reg = c->gicr_statusr[GICV3_NS]; + kvm_gicr_access(s, GICR_STATUSR, ncpu, &reg, true); + + reg = c->gicr_waker; + kvm_gicr_access(s, GICR_WAKER, ncpu, &reg, true); + + reg = c->gicr_igroupr0; + kvm_gicr_access(s, GICR_IGROUPR0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICENABLER0, ncpu, &reg, true); + reg = c->gicr_ienabler0; + kvm_gicr_access(s, GICR_ISENABLER0, ncpu, &reg, true); + + /* Restore config before pending so we treat level/edge correctly */ + reg = half_shuffle32(c->edge_trigger >> 16) << 1; + kvm_gicr_access(s, GICR_ICFGR1, ncpu, &reg, true); + + reg = c->level; + kvm_gic_line_level_access(s, 0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICPENDR0, ncpu, &reg, true); + reg = c->gicr_ipendr0; + kvm_gicr_access(s, GICR_ISPENDR0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICACTIVER0, ncpu, &reg, true); + reg = c->gicr_iactiver0; + kvm_gicr_access(s, GICR_ISACTIVER0, ncpu, &reg, true); + + for (i = 0; i < GIC_INTERNAL; i += 4) { + reg = c->gicr_ipriorityr[i] | + (c->gicr_ipriorityr[i + 1] << 8) | + (c->gicr_ipriorityr[i + 2] << 16) | + (c->gicr_ipriorityr[i + 3] << 24); + kvm_gicr_access(s, GICR_IPRIORITYR + i, ncpu, &reg, true); + } + } + + /* Distributor state (shared between all CPUs */ + reg = s->gicd_statusr[GICV3_NS]; + kvm_gicd_access(s, GICD_STATUSR, &reg, true); + + /* s->enable bitmap -> GICD_ISENABLERn */ + kvm_dist_putbmp(s, GICD_ISENABLER, GICD_ICENABLER, s->enabled); + + /* s->group bitmap -> GICD_IGROUPRn */ + kvm_dist_putbmp(s, GICD_IGROUPR, 0, s->group); + + /* Restore targets before pending to ensure the pending state is set on + * the appropriate CPU interfaces in the kernel + */ + + /* s->gicd_irouter[irq] -> GICD_IROUTERn + * We can't use kvm_dist_put() here because the registers are 64-bit + */ + for (i = GIC_INTERNAL; i < s->num_irq; i++) { + uint32_t offset; + + offset = GICD_IROUTER + (sizeof(uint32_t) * i); + reg = (uint32_t)s->gicd_irouter[i]; + kvm_gicd_access(s, offset, &reg, true); + + offset = GICD_IROUTER + (sizeof(uint32_t) * i) + 4; + reg = (uint32_t)(s->gicd_irouter[i] >> 32); + kvm_gicd_access(s, offset, &reg, true); + } + + /* s->trigger bitmap -> GICD_ICFGRn + * (restore configuration registers before pending IRQs so we treat + * level/edge correctly) + */ + kvm_dist_put_edge_trigger(s, GICD_ICFGR, s->edge_trigger); + + /* s->level bitmap -> line_level */ + kvm_gic_put_line_level_bmp(s, s->level); + + /* s->pending bitmap -> GICD_ISPENDRn */ + kvm_dist_putbmp(s, GICD_ISPENDR, GICD_ICPENDR, s->pending); + + /* s->active bitmap -> GICD_ISACTIVERn */ + kvm_dist_putbmp(s, GICD_ISACTIVER, GICD_ICACTIVER, s->active); + + /* s->gicd_ipriority[] -> GICD_IPRIORITYRn */ + kvm_dist_put_priority(s, GICD_IPRIORITYR, s->gicd_ipriority); + + /* CPU Interface state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + int num_pri_bits; + + kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, true); + kvm_gicc_access(s, ICC_CTLR_EL1, ncpu, + &c->icc_ctlr_el1[GICV3_NS], true); + kvm_gicc_access(s, ICC_IGRPEN0_EL1, ncpu, + &c->icc_igrpen[GICV3_G0], true); + kvm_gicc_access(s, ICC_IGRPEN1_EL1, ncpu, + &c->icc_igrpen[GICV3_G1NS], true); + kvm_gicc_access(s, ICC_PMR_EL1, ncpu, &c->icc_pmr_el1, true); + kvm_gicc_access(s, ICC_BPR0_EL1, ncpu, &c->icc_bpr[GICV3_G0], true); + kvm_gicc_access(s, ICC_BPR1_EL1, ncpu, &c->icc_bpr[GICV3_G1NS], true); + + num_pri_bits = ((c->icc_ctlr_el1[GICV3_NS] & + ICC_CTLR_EL1_PRIBITS_MASK) >> + ICC_CTLR_EL1_PRIBITS_SHIFT) + 1; + + switch (num_pri_bits) { + case 7: + reg64 = c->icc_apr[GICV3_G0][3]; + kvm_gicc_access(s, ICC_AP0R_EL1(3), ncpu, &reg64, true); + reg64 = c->icc_apr[GICV3_G0][2]; + kvm_gicc_access(s, ICC_AP0R_EL1(2), ncpu, &reg64, true); + case 6: + reg64 = c->icc_apr[GICV3_G0][1]; + kvm_gicc_access(s, ICC_AP0R_EL1(1), ncpu, &reg64, true); + default: + reg64 = c->icc_apr[GICV3_G0][0]; + kvm_gicc_access(s, ICC_AP0R_EL1(0), ncpu, &reg64, true); + } + + switch (num_pri_bits) { + case 7: + reg64 = c->icc_apr[GICV3_G1NS][3]; + kvm_gicc_access(s, ICC_AP1R_EL1(3), ncpu, &reg64, true); + reg64 = c->icc_apr[GICV3_G1NS][2]; + kvm_gicc_access(s, ICC_AP1R_EL1(2), ncpu, &reg64, true); + case 6: + reg64 = c->icc_apr[GICV3_G1NS][1]; + kvm_gicc_access(s, ICC_AP1R_EL1(1), ncpu, &reg64, true); + default: + reg64 = c->icc_apr[GICV3_G1NS][0]; + kvm_gicc_access(s, ICC_AP1R_EL1(0), ncpu, &reg64, true); + } + } } static void kvm_arm_gicv3_get(GICv3State *s) { - /* TODO */ - DPRINTF("Cannot get kernel gic state, no kernel interface\n"); + uint32_t regl, regh, reg; + uint64_t reg64, redist_typer; + int ncpu, i; + + kvm_arm_gicv3_check(s); + + kvm_gicr_access(s, GICR_TYPER, 0, &regl, false); + kvm_gicr_access(s, GICR_TYPER + 4, 0, &regh, false); + redist_typer = ((uint64_t)regh << 32) | regl; + + kvm_gicd_access(s, GICD_CTLR, &reg, false); + s->gicd_ctlr = reg; + + /* Redistributor state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + kvm_gicr_access(s, GICR_CTLR, ncpu, &reg, false); + c->gicr_ctlr = reg; + + kvm_gicr_access(s, GICR_STATUSR, ncpu, &reg, false); + c->gicr_statusr[GICV3_NS] = reg; + + kvm_gicr_access(s, GICR_WAKER, ncpu, &reg, false); + c->gicr_waker = reg; + + kvm_gicr_access(s, GICR_IGROUPR0, ncpu, &reg, false); + c->gicr_igroupr0 = reg; + kvm_gicr_access(s, GICR_ISENABLER0, ncpu, &reg, false); + c->gicr_ienabler0 = reg; + kvm_gicr_access(s, GICR_ICFGR1, ncpu, &reg, false); + c->edge_trigger = half_unshuffle32(reg >> 1) << 16; + kvm_gic_line_level_access(s, 0, ncpu, &reg, false); + c->level = reg; + kvm_gicr_access(s, GICR_ISPENDR0, ncpu, &reg, false); + c->gicr_ipendr0 = reg; + kvm_gicr_access(s, GICR_ISACTIVER0, ncpu, &reg, false); + c->gicr_iactiver0 = reg; + + for (i = 0; i < GIC_INTERNAL; i += 4) { + kvm_gicr_access(s, GICR_IPRIORITYR + i, ncpu, &reg, false); + c->gicr_ipriorityr[i] = extract32(reg, 0, 8); + c->gicr_ipriorityr[i + 1] = extract32(reg, 8, 8); + c->gicr_ipriorityr[i + 2] = extract32(reg, 16, 8); + c->gicr_ipriorityr[i + 3] = extract32(reg, 24, 8); + } + } + + if (redist_typer & GICR_TYPER_PLPIS) { + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + kvm_gicr_access(s, GICR_PROPBASER, ncpu, &regl, false); + kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, false); + c->gicr_propbaser = ((uint64_t)regh << 32) | regl; + + kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, false); + kvm_gicr_access(s, GICR_PENDBASER + 4, ncpu, &regh, false); + c->gicr_pendbaser = ((uint64_t)regh << 32) | regl; + } + } + + /* Distributor state (shared between all CPUs */ + + kvm_gicd_access(s, GICD_STATUSR, &reg, false); + s->gicd_statusr[GICV3_NS] = reg; + + /* GICD_IGROUPRn -> s->group bitmap */ + kvm_dist_getbmp(s, GICD_IGROUPR, s->group); + + /* GICD_ISENABLERn -> s->enabled bitmap */ + kvm_dist_getbmp(s, GICD_ISENABLER, s->enabled); + + /* Line level of irq */ + kvm_gic_get_line_level_bmp(s, s->level); + /* GICD_ISPENDRn -> s->pending bitmap */ + kvm_dist_getbmp(s, GICD_ISPENDR, s->pending); + + /* GICD_ISACTIVERn -> s->active bitmap */ + kvm_dist_getbmp(s, GICD_ISACTIVER, s->active); + + /* GICD_ICFGRn -> s->trigger bitmap */ + kvm_dist_get_edge_trigger(s, GICD_ICFGR, s->edge_trigger); + + /* GICD_IPRIORITYRn -> s->gicd_ipriority[] */ + kvm_dist_get_priority(s, GICD_IPRIORITYR, s->gicd_ipriority); + + /* GICD_IROUTERn -> s->gicd_irouter[irq] */ + for (i = GIC_INTERNAL; i < s->num_irq; i++) { + uint32_t offset; + + offset = GICD_IROUTER + (sizeof(uint32_t) * i); + kvm_gicd_access(s, offset, &regl, false); + offset = GICD_IROUTER + (sizeof(uint32_t) * i) + 4; + kvm_gicd_access(s, offset, &regh, false); + s->gicd_irouter[i] = ((uint64_t)regh << 32) | regl; + } + + /***************************************************************** + * CPU Interface(s) State + */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + int num_pri_bits; + + kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, false); + kvm_gicc_access(s, ICC_CTLR_EL1, ncpu, + &c->icc_ctlr_el1[GICV3_NS], false); + kvm_gicc_access(s, ICC_IGRPEN0_EL1, ncpu, + &c->icc_igrpen[GICV3_G0], false); + kvm_gicc_access(s, ICC_IGRPEN1_EL1, ncpu, + &c->icc_igrpen[GICV3_G1NS], false); + kvm_gicc_access(s, ICC_PMR_EL1, ncpu, &c->icc_pmr_el1, false); + kvm_gicc_access(s, ICC_BPR0_EL1, ncpu, &c->icc_bpr[GICV3_G0], false); + kvm_gicc_access(s, ICC_BPR1_EL1, ncpu, &c->icc_bpr[GICV3_G1NS], false); + num_pri_bits = ((c->icc_ctlr_el1[GICV3_NS] & + ICC_CTLR_EL1_PRIBITS_MASK) >> + ICC_CTLR_EL1_PRIBITS_SHIFT) + 1; + + switch (num_pri_bits) { + case 7: + kvm_gicc_access(s, ICC_AP0R_EL1(3), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][3] = reg64; + kvm_gicc_access(s, ICC_AP0R_EL1(2), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][2] = reg64; + case 6: + kvm_gicc_access(s, ICC_AP0R_EL1(1), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][1] = reg64; + default: + kvm_gicc_access(s, ICC_AP0R_EL1(0), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][0] = reg64; + } + + switch (num_pri_bits) { + case 7: + kvm_gicc_access(s, ICC_AP1R_EL1(3), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][3] = reg64; + kvm_gicc_access(s, ICC_AP1R_EL1(2), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][2] = reg64; + case 6: + kvm_gicc_access(s, ICC_AP1R_EL1(1), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][1] = reg64; + default: + kvm_gicc_access(s, ICC_AP1R_EL1(0), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][0] = reg64; + } + } } static void kvm_arm_gicv3_reset(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset(DeviceState *dev) DPRINTF("Reset\n"); kgc->parent_reset(dev); + + if (s->migration_blocker) { + DPRINTF("Cannot put kernel gic state, no kernel interface\n"); + return; + } + kvm_arm_gicv3_put(s); } @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); - /* Block migration of a KVM GICv3 device: the API for saving and restoring - * the state in the kernel is not yet finalised in the kernel or - * implemented in QEMU. - */ - error_setg(&s->migration_blocker, "vGICv3 migration is not implemented"); - migrate_add_blocker(s->migration_blocker, &local_err); - if (local_err) { - error_propagate(errp, local_err); - error_free(s->migration_blocker); - return; - } - /* Try to create the device via the device control API */ s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, false); if (s->dev_fd < 0) { @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) kvm_irqchip_commit_routes(kvm_state); } + + if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, + GICD_CTLR)) { + error_setg(&s->migration_blocker, "This operating system kernel does " + "not support vGICv3 migration"); + migrate_add_blocker(s->migration_blocker, &local_err); + if (local_err) { + error_propagate(errp, local_err); + error_free(s->migration_blocker); + return; + } + } } static void kvm_arm_gicv3_class_init(ObjectClass *klass, void *data) -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Add gicv3state void pointer to CPUARMState struct to store GICv3CPUState. In case of usecase like CPU reset, we need to reset GICv3CPUState of the CPU. In such scenario, this pointer becomes handy. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-5-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 2 ++ target/arm/cpu.h | 2 ++ hw/intc/arm_gicv3_common.c | 2 ++ hw/intc/arm_gicv3_cpuif.c | 8 ++++++++ 4 files changed, 14 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ static inline void gicv3_cache_all_target_cpustates(GICv3State *s) } } +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s); + #endif /* QEMU_ARM_GICV3_INTERNAL_H */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { void *nvic; const struct arm_boot_info *boot_info; + /* Store GICv3CPUState to access from this struct */ + void *gicv3state; } CPUARMState; /** diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp) s->cpu[i].cpu = cpu; s->cpu[i].gic = s; + /* Store GICv3CPUState in CPUARMState gicv3state pointer */ + gicv3_set_gicv3state(cpu, &s->cpu[i]); /* Pre-construct the GICR_TYPER: * For our implementation: diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ #include "gicv3_internal.h" #include "cpu.h" +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + env->gicv3state = (void *)s; +}; + static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { /* Given the CPU, find the right GICv3CPUState struct. -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reset CPU interface registers of GICv3 when CPU is reset. For this, ARMCPRegInfo struct is registered with one ICC register whose resetfn is called when cpu is reset. All the ICC registers are reset under one single register reset function instead of calling resetfn for each ICC register. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-6-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_get(GICv3State *s) } } +static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu; + GICv3State *s; + GICv3CPUState *c; + + c = (GICv3CPUState *)env->gicv3state; + s = c->gic; + cpu = ARM_CPU(c->cpu); + + /* Initialize to actual HW supported configuration */ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, + KVM_VGIC_ATTR(ICC_CTLR_EL1, cpu->mp_affinity), + &c->icc_ctlr_el1[GICV3_NS], false); + + c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS]; + c->icc_pmr_el1 = 0; + c->icc_bpr[GICV3_G0] = GIC_MIN_BPR; + c->icc_bpr[GICV3_G1] = GIC_MIN_BPR; + c->icc_bpr[GICV3_G1NS] = GIC_MIN_BPR; + + c->icc_sre_el1 = 0x7; + memset(c->icc_apr, 0, sizeof(c->icc_apr)); + memset(c->icc_igrpen, 0, sizeof(c->icc_igrpen)); +} + static void kvm_arm_gicv3_reset(DeviceState *dev) { GICv3State *s = ARM_GICV3_COMMON(dev); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset(DeviceState *dev) kvm_arm_gicv3_put(s); } +/* + * CPU interface registers of GIC needs to be reset on CPU reset. + * For the calling arm_gicv3_icc_reset() on CPU reset, we register + * below ARMCPRegInfo. As we reset the whole cpu interface under single + * register reset, we define only one register of CPU interface instead + * of defining all the registers. + */ +static const ARMCPRegInfo gicv3_cpuif_reginfo[] = { + { .name = "ICC_CTLR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 4, + /* + * If ARM_CP_NOP is used, resetfn is not called, + * So ARM_CP_NO_RAW is appropriate type. + */ + .type = ARM_CP_NO_RAW, + .access = PL1_RW, + .readfn = arm_cp_read_zero, + .writefn = arm_cp_write_ignore, + /* + * We hang the whole cpu interface reset routine off here + * rather than parcelling it out into one little function + * per register + */ + .resetfn = arm_gicv3_icc_reset, + }, + REGINFO_SENTINEL +}; + static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) { GICv3State *s = KVM_ARM_GICV3(dev); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); + for (i = 0; i < s->num_cpu; i++) { + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i)); + + define_arm_cp_regs(cpu, gicv3_cpuif_reginfo); + } + /* Try to create the device via the device control API */ s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, false); if (s->dev_fd < 0) { -- 2.7.4 Instead of qdev_set_parent_bus() silently doing the wrong thing if it's handed a device that's already on a bus, have it remove the device from the old bus and add it to the new one. This is useful for the raspi2 sdcard. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1488293711-14195-2-git-send-email-peter.maydell@linaro.org --- hw/core/qdev.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void bus_add_child(BusState *bus, DeviceState *child) void qdev_set_parent_bus(DeviceState *dev, BusState *bus) { + bool replugging = dev->parent_bus != NULL; + + if (replugging) { + /* Keep a reference to the device while it's not plugged into + * any bus, to avoid it potentially evaporating when it is + * dereffed in bus_remove_child(). + */ + object_ref(OBJECT(dev)); + bus_remove_child(dev->parent_bus, dev); + object_unref(OBJECT(dev->parent_bus)); + } dev->parent_bus = bus; object_ref(OBJECT(bus)); bus_add_child(bus, dev); + if (replugging) { + object_unref(OBJECT(dev)); + } } /* Create a new device. This only initializes the device state -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> Provide a new function sdbus_reparent_card() in sd core for reparenting a card from a SDBus to another one. This function is required by the raspi platform, where the two SD controllers can be dynamically switched. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-3-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-3-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added a doc comment to the header file; changed to use new behaviour of qdev_set_parent_bus()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sd.h | 11 +++++++++++ hw/sd/core.c | 27 +++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sd.h +++ b/include/hw/sd/sd.h @@ -XXX,XX +XXX,XX @@ uint8_t sdbus_read_data(SDBus *sd); bool sdbus_data_ready(SDBus *sd); bool sdbus_get_inserted(SDBus *sd); bool sdbus_get_readonly(SDBus *sd); +/** + * sdbus_reparent_card: Reparent an SD card from one controller to another + * @from: controller bus to remove card from + * @to: controller bus to move card to + * + * Reparent an SD card, effectively unplugging it from one controller + * and inserting it into another. This is useful for SoCs like the + * bcm2835 which have two SD controllers and connect a single SD card + * to them, selected by the guest reprogramming GPIO line routing. + */ +void sdbus_reparent_card(SDBus *from, SDBus *to); /* Functions to be used by SD devices to report back to qdevified controllers */ void sdbus_set_inserted(SDBus *sd, bool inserted); diff --git a/hw/sd/core.c b/hw/sd/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/core.c +++ b/hw/sd/core.c @@ -XXX,XX +XXX,XX @@ void sdbus_set_readonly(SDBus *sdbus, bool readonly) } } +void sdbus_reparent_card(SDBus *from, SDBus *to) +{ + SDState *card = get_card(from); + SDCardClass *sc; + bool readonly; + + /* We directly reparent the card object rather than implementing this + * as a hotpluggable connection because we don't want to expose SD cards + * to users as being hotpluggable, and we can get away with it in this + * limited use case. This could perhaps be implemented more cleanly in + * future by adding support to the hotplug infrastructure for "device + * can be hotplugged only via code, not by user". + */ + + if (!card) { + return; + } + + sc = SD_CARD_GET_CLASS(card); + readonly = sc->get_readonly(card); + + sdbus_set_inserted(from, false); + qdev_set_parent_bus(DEVICE(card), &to->qbus); + sdbus_set_inserted(to, true); + sdbus_set_readonly(to, readonly); +} + static const TypeInfo sd_bus_info = { .name = TYPE_SD_BUS, .parent = TYPE_BUS, -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> This adds the BCM2835 GPIO controller. It currently implements: - The 54 GPIOs as outputs (qemu_irq) - The SD controller selection via alternate function of GPIOs 48-53 Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-4-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-4-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/Makefile.objs | 1 + include/hw/gpio/bcm2835_gpio.h | 39 +++++ hw/gpio/bcm2835_gpio.c | 353 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 393 insertions(+) create mode 100644 include/hw/gpio/bcm2835_gpio.h create mode 100644 hw/gpio/bcm2835_gpio.c diff --git a/hw/gpio/Makefile.objs b/hw/gpio/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Makefile.objs +++ b/hw/gpio/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_GPIO_KEY) += gpio_key.o obj-$(CONFIG_OMAP) += omap_gpio.o obj-$(CONFIG_IMX) += imx_gpio.o +obj-$(CONFIG_RASPI) += bcm2835_gpio.o diff --git a/include/hw/gpio/bcm2835_gpio.h b/include/hw/gpio/bcm2835_gpio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/gpio/bcm2835_gpio.h @@ -XXX,XX +XXX,XX @@ +/* + * Raspberry Pi (BCM2835) GPIO Controller + * + * Copyright (c) 2017 Antfield SAS + * + * Authors: + * Clement Deschamps <clement.deschamps@antfield.fr> + * Luc Michel <luc.michel@antfield.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef BCM2835_GPIO_H +#define BCM2835_GPIO_H + +#include "hw/sd/sd.h" + +typedef struct BCM2835GpioState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + /* SDBus selector */ + SDBus sdbus; + SDBus *sdbus_sdhci; + SDBus *sdbus_sdhost; + + uint8_t fsel[54]; + uint32_t lev0, lev1; + uint8_t sd_fsel; + qemu_irq out[54]; +} BCM2835GpioState; + +#define TYPE_BCM2835_GPIO "bcm2835_gpio" +#define BCM2835_GPIO(obj) \ + OBJECT_CHECK(BCM2835GpioState, (obj), TYPE_BCM2835_GPIO) + +#endif diff --git a/hw/gpio/bcm2835_gpio.c b/hw/gpio/bcm2835_gpio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/bcm2835_gpio.c @@ -XXX,XX +XXX,XX @@ +/* + * Raspberry Pi (BCM2835) GPIO Controller + * + * Copyright (c) 2017 Antfield SAS + * + * Authors: + * Clement Deschamps <clement.deschamps@antfield.fr> + * Luc Michel <luc.michel@antfield.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/timer.h" +#include "qapi/error.h" +#include "hw/sysbus.h" +#include "hw/sd/sd.h" +#include "hw/gpio/bcm2835_gpio.h" + +#define GPFSEL0 0x00 +#define GPFSEL1 0x04 +#define GPFSEL2 0x08 +#define GPFSEL3 0x0C +#define GPFSEL4 0x10 +#define GPFSEL5 0x14 +#define GPSET0 0x1C +#define GPSET1 0x20 +#define GPCLR0 0x28 +#define GPCLR1 0x2C +#define GPLEV0 0x34 +#define GPLEV1 0x38 +#define GPEDS0 0x40 +#define GPEDS1 0x44 +#define GPREN0 0x4C +#define GPREN1 0x50 +#define GPFEN0 0x58 +#define GPFEN1 0x5C +#define GPHEN0 0x64 +#define GPHEN1 0x68 +#define GPLEN0 0x70 +#define GPLEN1 0x74 +#define GPAREN0 0x7C +#define GPAREN1 0x80 +#define GPAFEN0 0x88 +#define GPAFEN1 0x8C +#define GPPUD 0x94 +#define GPPUDCLK0 0x98 +#define GPPUDCLK1 0x9C + +static uint32_t gpfsel_get(BCM2835GpioState *s, uint8_t reg) +{ + int i; + uint32_t value = 0; + for (i = 0; i < 10; i++) { + uint32_t index = 10 * reg + i; + if (index < sizeof(s->fsel)) { + value |= (s->fsel[index] & 0x7) << (3 * i); + } + } + return value; +} + +static void gpfsel_set(BCM2835GpioState *s, uint8_t reg, uint32_t value) +{ + int i; + for (i = 0; i < 10; i++) { + uint32_t index = 10 * reg + i; + if (index < sizeof(s->fsel)) { + int fsel = (value >> (3 * i)) & 0x7; + s->fsel[index] = fsel; + } + } + + /* SD controller selection (48-53) */ + if (s->sd_fsel != 0 + && (s->fsel[48] == 0) /* SD_CLK_R */ + && (s->fsel[49] == 0) /* SD_CMD_R */ + && (s->fsel[50] == 0) /* SD_DATA0_R */ + && (s->fsel[51] == 0) /* SD_DATA1_R */ + && (s->fsel[52] == 0) /* SD_DATA2_R */ + && (s->fsel[53] == 0) /* SD_DATA3_R */ + ) { + /* SDHCI controller selected */ + sdbus_reparent_card(s->sdbus_sdhost, s->sdbus_sdhci); + s->sd_fsel = 0; + } else if (s->sd_fsel != 4 + && (s->fsel[48] == 4) /* SD_CLK_R */ + && (s->fsel[49] == 4) /* SD_CMD_R */ + && (s->fsel[50] == 4) /* SD_DATA0_R */ + && (s->fsel[51] == 4) /* SD_DATA1_R */ + && (s->fsel[52] == 4) /* SD_DATA2_R */ + && (s->fsel[53] == 4) /* SD_DATA3_R */ + ) { + /* SDHost controller selected */ + sdbus_reparent_card(s->sdbus_sdhci, s->sdbus_sdhost); + s->sd_fsel = 4; + } +} + +static int gpfsel_is_out(BCM2835GpioState *s, int index) +{ + if (index >= 0 && index < 54) { + return s->fsel[index] == 1; + } + return 0; +} + +static void gpset(BCM2835GpioState *s, + uint32_t val, uint8_t start, uint8_t count, uint32_t *lev) +{ + uint32_t changes = val & ~*lev; + uint32_t cur = 1; + + int i; + for (i = 0; i < count; i++) { + if ((changes & cur) && (gpfsel_is_out(s, start + i))) { + qemu_set_irq(s->out[start + i], 1); + } + cur <<= 1; + } + + *lev |= val; +} + +static void gpclr(BCM2835GpioState *s, + uint32_t val, uint8_t start, uint8_t count, uint32_t *lev) +{ + uint32_t changes = val & *lev; + uint32_t cur = 1; + + int i; + for (i = 0; i < count; i++) { + if ((changes & cur) && (gpfsel_is_out(s, start + i))) { + qemu_set_irq(s->out[start + i], 0); + } + cur <<= 1; + } + + *lev &= ~val; +} + +static uint64_t bcm2835_gpio_read(void *opaque, hwaddr offset, + unsigned size) +{ + BCM2835GpioState *s = (BCM2835GpioState *)opaque; + + switch (offset) { + case GPFSEL0: + case GPFSEL1: + case GPFSEL2: + case GPFSEL3: + case GPFSEL4: + case GPFSEL5: + return gpfsel_get(s, offset / 4); + case GPSET0: + case GPSET1: + /* Write Only */ + return 0; + case GPCLR0: + case GPCLR1: + /* Write Only */ + return 0; + case GPLEV0: + return s->lev0; + case GPLEV1: + return s->lev1; + case GPEDS0: + case GPEDS1: + case GPREN0: + case GPREN1: + case GPFEN0: + case GPFEN1: + case GPHEN0: + case GPHEN1: + case GPLEN0: + case GPLEN1: + case GPAREN0: + case GPAREN1: + case GPAFEN0: + case GPAFEN1: + case GPPUD: + case GPPUDCLK0: + case GPPUDCLK1: + /* Not implemented */ + return 0; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); + break; + } + + return 0; +} + +static void bcm2835_gpio_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + BCM2835GpioState *s = (BCM2835GpioState *)opaque; + + switch (offset) { + case GPFSEL0: + case GPFSEL1: + case GPFSEL2: + case GPFSEL3: + case GPFSEL4: + case GPFSEL5: + gpfsel_set(s, offset / 4, value); + break; + case GPSET0: + gpset(s, value, 0, 32, &s->lev0); + break; + case GPSET1: + gpset(s, value, 32, 22, &s->lev1); + break; + case GPCLR0: + gpclr(s, value, 0, 32, &s->lev0); + break; + case GPCLR1: + gpclr(s, value, 32, 22, &s->lev1); + break; + case GPLEV0: + case GPLEV1: + /* Read Only */ + break; + case GPEDS0: + case GPEDS1: + case GPREN0: + case GPREN1: + case GPFEN0: + case GPFEN1: + case GPHEN0: + case GPHEN1: + case GPLEN0: + case GPLEN1: + case GPAREN0: + case GPAREN1: + case GPAFEN0: + case GPAFEN1: + case GPPUD: + case GPPUDCLK0: + case GPPUDCLK1: + /* Not implemented */ + break; + default: + goto err_out; + } + return; + +err_out: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); +} + +static void bcm2835_gpio_reset(DeviceState *dev) +{ + BCM2835GpioState *s = BCM2835_GPIO(dev); + + int i; + for (i = 0; i < 6; i++) { + gpfsel_set(s, i, 0); + } + + s->sd_fsel = 0; + + /* SDHCI is selected by default */ + sdbus_reparent_card(&s->sdbus, s->sdbus_sdhci); + + s->lev0 = 0; + s->lev1 = 0; +} + +static const MemoryRegionOps bcm2835_gpio_ops = { + .read = bcm2835_gpio_read, + .write = bcm2835_gpio_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription vmstate_bcm2835_gpio = { + .name = "bcm2835_gpio", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(fsel, BCM2835GpioState, 54), + VMSTATE_UINT32(lev0, BCM2835GpioState), + VMSTATE_UINT32(lev1, BCM2835GpioState), + VMSTATE_UINT8(sd_fsel, BCM2835GpioState), + VMSTATE_END_OF_LIST() + } +}; + +static void bcm2835_gpio_init(Object *obj) +{ + BCM2835GpioState *s = BCM2835_GPIO(obj); + DeviceState *dev = DEVICE(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), + TYPE_SD_BUS, DEVICE(s), "sd-bus"); + + memory_region_init_io(&s->iomem, obj, + &bcm2835_gpio_ops, s, "bcm2835_gpio", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); + qdev_init_gpio_out(dev, s->out, 54); +} + +static void bcm2835_gpio_realize(DeviceState *dev, Error **errp) +{ + BCM2835GpioState *s = BCM2835_GPIO(dev); + Object *obj; + Error *err = NULL; + + obj = object_property_get_link(OBJECT(dev), "sdbus-sdhci", &err); + if (obj == NULL) { + error_setg(errp, "%s: required sdhci link not found: %s", + __func__, error_get_pretty(err)); + return; + } + s->sdbus_sdhci = SD_BUS(obj); + + obj = object_property_get_link(OBJECT(dev), "sdbus-sdhost", &err); + if (obj == NULL) { + error_setg(errp, "%s: required sdhost link not found: %s", + __func__, error_get_pretty(err)); + return; + } + s->sdbus_sdhost = SD_BUS(obj); +} + +static void bcm2835_gpio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_bcm2835_gpio; + dc->realize = &bcm2835_gpio_realize; + dc->reset = &bcm2835_gpio_reset; +} + +static const TypeInfo bcm2835_gpio_info = { + .name = TYPE_BCM2835_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835GpioState), + .instance_init = bcm2835_gpio_init, + .class_init = bcm2835_gpio_class_init, +}; + +static void bcm2835_gpio_register_types(void) +{ + type_register_static(&bcm2835_gpio_info); +} + +type_init(bcm2835_gpio_register_types) -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> This adds the bcm2835_sdhost and bcm2835_gpio to the BCM2835 platform. For supporting the SD controller selection (alternate function of GPIOs 48-53), the bcm2835_gpio now exposes an sdbus. It also has a link to both the sdbus of sdhci and sdhost controllers, and the card is reparented from one bus to another when the alternate function of GPIOs 48-53 is modified. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-5-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-5-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 4 ++++ hw/arm/bcm2835_peripherals.c | 43 ++++++++++++++++++++++++++++++++++-- 2 files changed, 45 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_rng.h" #include "hw/misc/bcm2835_mbox.h" #include "hw/sd/sdhci.h" +#include "hw/sd/bcm2835_sdhost.h" +#include "hw/gpio/bcm2835_gpio.h" #define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals" #define BCM2835_PERIPHERALS(obj) \ @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { BCM2835RngState rng; BCM2835MboxState mboxes; SDHCIState sdhci; + BCM2835SDHostState sdhost; + BCM2835GpioState gpio; } BCM2835PeripheralState; #endif /* BCM2835_PERIPHERALS_H */ diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) object_property_add_child(obj, "sdhci", OBJECT(&s->sdhci), NULL); qdev_set_parent_bus(DEVICE(&s->sdhci), sysbus_get_default()); + /* SDHOST */ + object_initialize(&s->sdhost, sizeof(s->sdhost), TYPE_BCM2835_SDHOST); + object_property_add_child(obj, "sdhost", OBJECT(&s->sdhost), NULL); + qdev_set_parent_bus(DEVICE(&s->sdhost), sysbus_get_default()); + /* DMA Channels */ object_initialize(&s->dma, sizeof(s->dma), TYPE_BCM2835_DMA); object_property_add_child(obj, "dma", OBJECT(&s->dma), NULL); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) object_property_add_const_link(OBJECT(&s->dma), "dma-mr", OBJECT(&s->gpu_bus_mr), &error_abort); + + /* GPIO */ + object_initialize(&s->gpio, sizeof(s->gpio), TYPE_BCM2835_GPIO); + object_property_add_child(obj, "gpio", OBJECT(&s->gpio), NULL); + qdev_set_parent_bus(DEVICE(&s->gpio), sysbus_get_default()); + + object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhci", + OBJECT(&s->sdhci.sdbus), &error_abort); + object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost", + OBJECT(&s->sdhost.sdbus), &error_abort); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, INTERRUPT_ARASANSDIO)); - object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->sdhci), "sd-bus", - &err); + + /* SDHOST */ + object_property_set_bool(OBJECT(&s->sdhost), true, "realized", &err); if (err) { error_propagate(errp, err); return; } + memory_region_add_subregion(&s->peri_mr, MMCI0_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->sdhost), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhost), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_SDIO)); + /* DMA Channels */ object_property_set_bool(OBJECT(&s->dma), true, "realized", &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) BCM2835_IC_GPU_IRQ, INTERRUPT_DMA0 + n)); } + + /* GPIO */ + object_property_set_bool(OBJECT(&s->gpio), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, GPIO_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0)); + + object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus", + &err); + if (err) { + error_propagate(errp, err); + return; + } } static void bcm2835_peripherals_class_init(ObjectClass *oc, void *data) -- 2.7.4 First pullreq for arm of the 4.1 series, since I'm back from holiday now. This is mostly my M-profile FPU series and Philippe's devices.h cleanup. I have a pile of other patchsets to work through in my to-review folder, but 42 patches is definitely quite big enough to send now... thanks -- PMM The following changes since commit 413a99a92c13ec408dcf2adaa87918dc81e890c8: Add Nios II semihosting support. (2019-04-29 16:09:51 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190429 for you to fetch changes up to 437cc27ddfded3bbab6afd5ac1761e0e195edba7: hw/devices: Move SMSC 91C111 declaration into a new header (2019-04-29 17:57:21 +0100) ---------------------------------------------------------------- target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode ---------------------------------------------------------------- Eric Auger (1): hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell (28): hw/ssi/xilinx_spips: Avoid variable length array configure: Remove --source-path option target/arm: Make sure M-profile FPSCR RES0 bits are not settable hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers target/arm: Implement dummy versions of M-profile FP-related registers target/arm: Disable most VFP sysregs for M-profile target/arm: Honour M-profile FP enable bits target/arm: Decode FP instructions for M profile target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL target/arm/helper: don't return early for STKOF faults during stacking target/arm: Handle floating point registers in exception entry target/arm: Implement v7m_update_fpccr() target/arm: Clear CONTROL.SFPA in BXNS and BLXNS target/arm: Clean excReturn bits when tail chaining target/arm: Allow for floating point in callee stack integrity check target/arm: Handle floating point registers in exception return target/arm: Move NS TBFLAG from bit 19 to bit 6 target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags target/arm: Set FPCCR.S when executing M-profile floating point insns target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set target/arm: New helper function arm_v7m_mmu_idx_all() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: Implement M-profile lazy FP state preservation target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Philippe Mathieu-Daudé (13): hw/dma: Compile the bcm2835_dma device as common object hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/display/tc6393xb: Remove unused functions hw/devices: Move TC6393XB declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move LAN9118 declarations into a new header hw/net/ne2000-isa: Add guards to the header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/devices: Move SMSC 91C111 declaration into a new header configure | 10 +- hw/dma/Makefile.objs | 2 +- include/hw/arm/omap.h | 6 +- include/hw/arm/smmu-common.h | 8 +- include/hw/devices.h | 62 --- include/hw/display/blizzard.h | 22 ++ include/hw/display/tc6393xb.h | 24 ++ include/hw/input/gamepad.h | 19 + include/hw/input/tsc2xxx.h | 36 ++ include/hw/misc/cbus.h | 32 ++ include/hw/net/lan9118.h | 21 + include/hw/net/ne2000-isa.h | 6 + include/hw/net/smc91c111.h | 19 + include/qemu/typedefs.h | 1 - target/arm/cpu.h | 95 ++++- target/arm/helper.h | 5 + target/arm/translate.h | 3 + hw/arm/aspeed.c | 13 +- hw/arm/exynos4_boards.c | 3 +- hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/kzm.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 2 +- hw/arm/nseries.c | 7 +- hw/arm/palm.c | 2 +- hw/arm/realview.c | 3 +- hw/arm/smmu-common.c | 6 +- hw/arm/smmuv3.c | 28 +- hw/arm/stellaris.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/display/blizzard.c | 2 +- hw/display/tc6393xb.c | 18 +- hw/input/stellaris_input.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 +- hw/intc/armv7m_nvic.c | 261 +++++++++++++ hw/misc/cbus.c | 2 +- hw/net/lan9118.c | 3 +- hw/net/smc91c111.c | 2 +- hw/ssi/xilinx_spips.c | 6 +- target/arm/cpu.c | 20 + target/arm/helper.c | 873 +++++++++++++++++++++++++++++++++++++++--- target/arm/machine.c | 16 + target/arm/translate.c | 150 +++++++- target/arm/vfp_helper.c | 8 + MAINTAINERS | 7 + 50 files changed, 1595 insertions(+), 235 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/display/blizzard.h create mode 100644 include/hw/display/tc6393xb.h create mode 100644 include/hw/input/gamepad.h create mode 100644 include/hw/input/tsc2xxx.h create mode 100644 include/hw/misc/cbus.h create mode 100644 include/hw/net/lan9118.h create mode 100644 include/hw/net/smc91c111.h From: Eric Auger <eric.auger@redhat.com> The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 8 ++------ hw/arm/smmu-common.c | 6 +++--- hw/arm/smmuv3.c | 28 +++++++--------------------- 3 files changed, 12 insertions(+), 30 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUDevice { AddressSpace as; uint32_t cfg_cache_hits; uint32_t cfg_cache_misses; + QLIST_ENTRY(SMMUDevice) next; } SMMUDevice; -typedef struct SMMUNotifierNode { - SMMUDevice *sdev; - QLIST_ENTRY(SMMUNotifierNode) next; -} SMMUNotifierNode; - typedef struct SMMUPciBus { PCIBus *bus; SMMUDevice *pbdev[0]; /* Parent array is sparse, so dynamically alloc */ @@ -XXX,XX +XXX,XX @@ typedef struct SMMUState { GHashTable *iotlb; SMMUPciBus *smmu_pcibus_by_bus_num[SMMU_PCI_BUS_MAX]; PCIBus *pci_bus; - QLIST_HEAD(, SMMUNotifierNode) notifiers_list; + QLIST_HEAD(, SMMUDevice) devices_with_notifiers; uint8_t bus_num; PCIBus *primary_bus; } SMMUState; diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) /* Unmap all notifiers of all mr's */ void smmu_inv_notifiers_all(SMMUState *s) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - smmu_inv_notifiers_mr(&node->sdev->iommu); + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + smmu_inv_notifiers_mr(&sdev->iommu); } } diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr, /* invalidate an asid/iova tuple in all mr's */ static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, dma_addr_t iova) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - IOMMUMemoryRegion *mr = &node->sdev->iommu; + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + IOMMUMemoryRegion *mr = &sdev->iommu; IOMMUNotifier *n; trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, iova); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, SMMUDevice *sdev = container_of(iommu, SMMUDevice, iommu); SMMUv3State *s3 = sdev->smmu; SMMUState *s = &(s3->smmu_state); - SMMUNotifierNode *node = NULL; - SMMUNotifierNode *next_node = NULL; if (new & IOMMU_NOTIFIER_MAP) { int bus_num = pci_bus_num(sdev->bus); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, if (old == IOMMU_NOTIFIER_NONE) { trace_smmuv3_notify_flag_add(iommu->parent_obj.name); - node = g_malloc0(sizeof(*node)); - node->sdev = sdev; - QLIST_INSERT_HEAD(&s->notifiers_list, node, next); - return; - } - - /* update notifier node with new flags */ - QLIST_FOREACH_SAFE(node, &s->notifiers_list, next, next_node) { - if (node->sdev == sdev) { - if (new == IOMMU_NOTIFIER_NONE) { - trace_smmuv3_notify_flag_del(iommu->parent_obj.name); - QLIST_REMOVE(node, next); - g_free(node); - } - return; - } + QLIST_INSERT_HEAD(&s->devices_with_notifiers, sdev, next); + } else if (new == IOMMU_NOTIFIER_NONE) { + trace_smmuv3_notify_flag_del(iommu->parent_obj.name); + QLIST_REMOVE(sdev, next); } } -- 2.20.1 In the stripe8() function we use a variable length array; however we know that the maximum length required is MAX_NUM_BUSSES. Use a fixed-length array and an assert instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190328152635.2794-1-peter.maydell@linaro.org --- hw/ssi/xilinx_spips.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d) static inline void stripe8(uint8_t *x, int num, bool dir) { - uint8_t r[num]; - memset(r, 0, sizeof(uint8_t) * num); + uint8_t r[MAX_NUM_BUSSES]; int idx[2] = {0, 0}; int bit[2] = {0, 7}; int d = dir; + assert(num <= MAX_NUM_BUSSES); + memset(r, 0, sizeof(uint8_t) * num); + for (idx[0] = 0; idx[0] < num; ++idx[0]) { for (bit[0] = 7; bit[0] >= 0; bit[0]--) { r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0; -- 2.20.1 Normally configure identifies the source path by looking at the location where the configure script itself exists. We also provide a --source-path option which lets the user manually override this. There isn't really an obvious use case for the --source-path option, and in commit 927128222b0a91f56c13a in 2017 we accidentally added some logic that looks at $source_path before the command line option that overrides it has been processed. The fact that nobody complained suggests that there isn't any use of this option and we aren't testing it either; remove it. This allows us to move the "make $source_path absolute" logic up so that there is no window in the script where $source_path is set but not yet absolute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190318134019.23729-1-peter.maydell@linaro.org --- configure | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ ld_has() { # default parameters source_path=$(dirname "$0") +# make source path absolute +source_path=$(cd "$source_path"; pwd) cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" @@ -XXX,XX +XXX,XX @@ for opt do ;; --cxx=*) CXX="$optarg" ;; - --source-path=*) source_path="$optarg" - ;; --cpu=*) cpu="$optarg" ;; --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg" @@ -XXX,XX +XXX,XX @@ if test "$debug_info" = "yes"; then LDFLAGS="-g $LDFLAGS" fi -# make source path absolute -source_path=$(cd "$source_path"; pwd) - # running configure in the source tree? # we know that's the case if configure is there. if test -f "./configure"; then @@ -XXX,XX +XXX,XX @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) - ;; --cross-prefix=*) ;; --cc=*) @@ -XXX,XX +XXX,XX @@ $(echo Available targets: $default_target_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --source-path=PATH path of source code [$source_path] --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] -- 2.20.1 Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org --- target/arm/vfp_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) val &= ~FPCR_FZ16; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + /* * We don't implement trapped exception handling, so the * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) -- 2.20.1 For M-profile the MVFR* ID registers are memory mapped, in the range we implement via the NVIC. Allow them to be read. (If the CPU has no FPU, these registers are defined to be RAZ.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf40: /* MVFR0 */ + return cpu->isar.mvfr0; + case 0xf44: /* MVFR1 */ + return cpu->isar.mvfr1; + case 0xf48: /* MVFR2 */ + return cpu->isar.mvfr2; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); -- 2.20.1 The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org --- target/arm/cpu.h | 34 ++++++++++++ hw/intc/armv7m_nvic.c | 125 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 ++ target/arm/machine.c | 16 ++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t scr[M_REG_NUM_BANKS]; uint32_t msplim[M_REG_NUM_BANKS]; uint32_t psplim[M_REG_NUM_BANKS]; + uint32_t fpcar[M_REG_NUM_BANKS]; + uint32_t fpccr[M_REG_NUM_BANKS]; + uint32_t fpdscr[M_REG_NUM_BANKS]; + uint32_t cpacr[M_REG_NUM_BANKS]; + uint32_t nsacr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CSSELR, LEVEL, 1, 3) */ FIELD(V7M_CSSELR, INDEX, 0, 4) +/* v7M FPCCR bits */ +FIELD(V7M_FPCCR, LSPACT, 0, 1) +FIELD(V7M_FPCCR, USER, 1, 1) +FIELD(V7M_FPCCR, S, 2, 1) +FIELD(V7M_FPCCR, THREAD, 3, 1) +FIELD(V7M_FPCCR, HFRDY, 4, 1) +FIELD(V7M_FPCCR, MMRDY, 5, 1) +FIELD(V7M_FPCCR, BFRDY, 6, 1) +FIELD(V7M_FPCCR, SFRDY, 7, 1) +FIELD(V7M_FPCCR, MONRDY, 8, 1) +FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) +FIELD(V7M_FPCCR, UFRDY, 10, 1) +FIELD(V7M_FPCCR, RES0, 11, 15) +FIELD(V7M_FPCCR, TS, 26, 1) +FIELD(V7M_FPCCR, CLRONRETS, 27, 1) +FIELD(V7M_FPCCR, CLRONRET, 28, 1) +FIELD(V7M_FPCCR, LSPENS, 29, 1) +FIELD(V7M_FPCCR, LSPEN, 30, 1) +FIELD(V7M_FPCCR, ASPEN, 31, 1) +/* These bits are banked. Others are non-banked and live in the M_REG_S bank */ +#define R_V7M_FPCCR_BANKED_MASK \ + (R_V7M_FPCCR_LSPACT_MASK | \ + R_V7M_FPCCR_USER_MASK | \ + R_V7M_FPCCR_THREAD_MASK | \ + R_V7M_FPCCR_MMRDY_MASK | \ + R_V7M_FPCCR_SPLIMVIOL_MASK | \ + R_V7M_FPCCR_UFRDY_MASK | \ + R_V7M_FPCCR_ASPEN_MASK) + /* * System register ID fields. */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; + case 0xd88: /* CPACR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.cpacr[attrs.secure]; + case 0xd8c: /* NSACR */ + if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.nsacr; /* TODO: Implement debug registers. */ case 0xd90: /* MPU_TYPE */ /* Unified MPU; if the MPU is not present this value is zero */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf34: /* FPCCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + if (attrs.secure) { + return cpu->env.v7m.fpccr[M_REG_S]; + } else { + /* + * NS can read LSPEN, CLRONRET and MONRDY. It can read + * BFRDY and HFRDY if AIRCR.BFHFNMINS != 0; + * other non-banked bits RAZ. + * TODO: MONRDY should RAZ/WI if DEMCR.SDME is set. + */ + uint32_t value = cpu->env.v7m.fpccr[M_REG_S]; + uint32_t mask = R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_CLRONRET_MASK | + R_V7M_FPCCR_MONRDY_MASK; + + if (s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + mask |= R_V7M_FPCCR_BFRDY_MASK | R_V7M_FPCCR_HFRDY_MASK; + } + + value &= mask; + + value |= cpu->env.v7m.fpccr[M_REG_NS]; + return value; + } + case 0xf38: /* FPCAR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpcar[attrs.secure]; + case 0xf3c: /* FPDSCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpdscr[attrs.secure]; case 0xf40: /* MVFR0 */ return cpu->isar.mvfr0; case 0xf44: /* MVFR1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.csselr[attrs.secure] = value & R_V7M_CSSELR_INDEX_MASK; } break; + case 0xd88: /* CPACR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); + } + break; + case 0xd8c: /* NSACR */ + if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.nsacr = value & (3 << 10); + } + break; case 0xd90: /* MPU_TYPE */ return; /* RO */ case 0xd94: /* MPU_CTRL */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf34: /* FPCCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* Not all bits here are banked. */ + uint32_t fpccr_s; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* Don't allow setting of bits not present in v7M */ + value &= (R_V7M_FPCCR_LSPACT_MASK | + R_V7M_FPCCR_USER_MASK | + R_V7M_FPCCR_THREAD_MASK | + R_V7M_FPCCR_HFRDY_MASK | + R_V7M_FPCCR_MMRDY_MASK | + R_V7M_FPCCR_BFRDY_MASK | + R_V7M_FPCCR_MONRDY_MASK | + R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_ASPEN_MASK); + } + value &= ~R_V7M_FPCCR_RES0_MASK; + + if (!attrs.secure) { + /* Some non-banked bits are configurably writable by NS */ + fpccr_s = cpu->env.v7m.fpccr[M_REG_S]; + if (!(fpccr_s & R_V7M_FPCCR_LSPENS_MASK)) { + uint32_t lspen = FIELD_EX32(value, V7M_FPCCR, LSPEN); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, LSPEN, lspen); + } + if (!(fpccr_s & R_V7M_FPCCR_CLRONRETS_MASK)) { + uint32_t cor = FIELD_EX32(value, V7M_FPCCR, CLRONRET); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, CLRONRET, cor); + } + if ((s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + uint32_t hfrdy = FIELD_EX32(value, V7M_FPCCR, HFRDY); + uint32_t bfrdy = FIELD_EX32(value, V7M_FPCCR, BFRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + } + /* TODO MONRDY should RAZ/WI if DEMCR.SDME is set */ + { + uint32_t monrdy = FIELD_EX32(value, V7M_FPCCR, MONRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, MONRDY, monrdy); + } + + /* + * All other non-banked bits are RAZ/WI from NS; write + * just the banked bits to fpccr[M_REG_NS]. + */ + value &= R_V7M_FPCCR_BANKED_MASK; + cpu->env.v7m.fpccr[M_REG_NS] = value; + } else { + fpccr_s = value; + } + cpu->env.v7m.fpccr[M_REG_S] = fpccr_s; + } + break; + case 0xf38: /* FPCAR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= ~7; + cpu->env.v7m.fpcar[attrs.secure] = value; + } + break; + case 0xf3c: /* FPDSCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= 0x07c00000; + cpu->env.v7m.fpdscr[attrs.secure] = value; + } + break; case 0xf50: /* ICIALLU */ case 0xf58: /* ICIMVAU */ case 0xf5c: /* DCIMVAC */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; + env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | + R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_v8m = { } }; +static const VMStateDescription vmstate_m_fp = { + .name = "cpu/m/fp", + .version_id = 1, + .minimum_version_id = 1, + .needed = vfp_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(env.v7m.fpcar, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpccr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpdscr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.cpacr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32(env.v7m.nsacr, ARMCPU), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_scr, &vmstate_m_other_sp, &vmstate_m_v8m, + &vmstate_m_fp, NULL } }; -- 2.20.1 The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org --- target/arm/translate.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } } else { /* !dp */ + bool is_sysreg; + if ((insn & 0x6f) != 0x00) return 1; rn = VFP_SREG_N(insn); + + is_sysreg = extract32(insn, 21, 1); + + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* + * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. + * Writes to R15 are UNPREDICTABLE; we choose to undef. + */ + if (is_sysreg && (rd == 15 || (rn >> 1) != ARM_VFP_FPSCR)) { + return 1; + } + } + if (insn & ARM_CP_RW_BIT) { /* vfp->arm */ - if (insn & (1 << 21)) { + if (is_sysreg) { /* system register */ rn >>= 1; @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } else { /* arm->vfp */ - if (insn & (1 << 21)) { + if (is_sysreg) { rn >>= 1; /* system register */ switch (rn) { -- 2.20.1 Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org --- target/arm/helper.c | 55 +++++++++++++++++++++++++++++++++++++++--- target/arm/translate.c | 10 ++++++-- 2 files changed, 60 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +/* + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, ARMMMUIdx mmu_idx, bool ignfault) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + { + /* + * NOCP might be directed to something other than the current + * security state if this fault is because of NSACR; we indicate + * the target security state using exception.target_el. + */ + int target_secstate; + + if (env->exception.target_el == 3) { + target_secstate = M_REG_S; + } else { + target_secstate = env->v7m.secure; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); + env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; break; + } case EXCP_INVSTATE: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* CPACR can cause a NOCP UsageFault taken to current security state */ + if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { + return 1; + } + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { + if (!extract32(env->v7m.nsacr, 10, 1)) { + /* FP insns cause a NOCP UsageFault taken to Secure */ + return 3; + } + } + + return 0; + } + /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1)) { + || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) * for attempts to execute invalid vfp/neon encodings with FP disabled. */ if (s->fp_excp_el) { - gen_exception_insn(s, 4, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), + s->fp_excp_el); + } else { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), + s->fp_excp_el); + } return 0; } -- 2.20.1 Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org --- target/arm/translate.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) case 6: case 7: case 14: case 15: /* Coprocessor. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* We don't currently implement M profile FP support, - * so this entire space should give a NOCP fault, with - * the exception of the v8M VLLDM and VLSTM insns, which - * must be NOPs in Secure state and UNDEF in Nonsecure state. + /* 0b111x_11xx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx */ + if (extract32(insn, 24, 2) == 3) { + goto illegal_op; /* op0 = 0b11 : unallocated */ + } + + /* + * Decode VLLDM and VLSTM first: these are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that disas_vfp_insn() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. */ if (arm_dc_feature(s, ARM_FEATURE_V8) && (insn & 0xffa00f00) == 0xec200a00) { @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) /* Just NOP since FP support is not implemented */ break; } + if (arm_dc_feature(s, ARM_FEATURE_VFP) && + ((insn >> 8) & 0xe) == 10) { + /* FP, and the CPU supports it */ + if (disas_vfp_insn(s, insn)) { + goto illegal_op; + } + break; + } + /* All other insns: NOCP */ gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), default_exception_el(s)); -- 2.20.1 If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); env->regs[14] &= ~1; + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; -- 2.20.1 The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org --- target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return xpsr_read(env) & mask; break; case 20: /* CONTROL */ - return env->v7m.control[env->v7m.secure]; + { + uint32_t value = env->v7m.control[env->v7m.secure]; + if (!env->v7m.secure) { + /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ + value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; + } + return value; + } case 0x94: /* CONTROL_NS */ /* We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) if (!env->v7m.secure) { return 0; } - return env->v7m.control[M_REG_NS]; + return env->v7m.control[M_REG_NS] | + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); } if (el == 0) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) */ uint32_t mask = extract32(maskreg, 8, 4); uint32_t reg = extract32(maskreg, 0, 8); + int cur_el = arm_current_el(env); - if (arm_current_el(env) == 0 && reg > 7) { - /* only xPSR sub-fields may be written by unprivileged */ + if (cur_el == 0 && reg > 7 && reg != 20) { + /* + * only xPSR sub-fields and CONTROL.SFPA may be written by + * unprivileged code + */ return; } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; } + /* + * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, + * RES0 if the FPU is not present, and is stored in the S bank + */ + if (arm_feature(env, ARM_FEATURE_VFP) && + extract32(env->v7m.nsacr, 10, 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ - /* Writing to the SPSEL bit only has an effect if we are in + /* + * Writing to the SPSEL bit only has an effect if we are in * thread mode; other bits can be updated by any privileged code. * write_v7m_control_spsel() deals with updating the SPSEL bit in * env->v7m.control, so we only need update the others. * For v7M, we must just ignore explicit writes to SPSEL in handler * mode; for v8M the write is permitted but will have no effect. + * All these bits are writes-ignored from non-privileged code, + * except for SFPA. */ - if (arm_feature(env, ARM_FEATURE_V8) || - !arm_v7m_is_handler_mode(env)) { + if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || + !arm_v7m_is_handler_mode(env))) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + /* + * SFPA is RAZ/WI from NS or if no FPU. + * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. + * Both are stored in the S bank. + */ + if (env->v7m.secure) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; + } + if (cur_el > 0 && + (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || + extract32(env->v7m.nsacr, 10, 1))) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } + } break; default: bad_reg: -- 2.20.1 Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ - bool stacked_ok; + bool stacked_ok = true, limitviol = false; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->regs[13] = limit; - return true; + /* + * We won't try to perform any further memory accesses but + * we must continue through the following code to check for + * permission faults during FPU state preservation, and we + * must update FPCCR if lazy stacking is enabled. + */ + limitviol = true; + stacked_ok = false; } } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * (which may be taken in preference to the one we started with * if it has higher priority). */ - stacked_ok = + stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); - /* Update SP regardless of whether any of the stack accesses failed. */ - env->regs[13] = frameptr; + /* + * If we broke a stack limit then SP was already updated earlier; + * otherwise we update SP regardless of whether any of the stack + * accesses failed or we took some other kind of fault. + */ + if (!limitviol) { + env->regs[13] = frameptr; + } return !stacked_ok; } -- 2.20.1 Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org --- target/arm/helper.c | 98 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); arm_clear_exclusive(env); + /* Clear SFPA and FPCA (has no effect if no FPU) */ + env->v7m.control[M_REG_S] &= + ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; ARMMMUIdx mmu_idx = arm_mmu_idx(env); + uint32_t framesize; + bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); + + if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && + (env->v7m.secure || nsacr_cp10)) { + if (env->v7m.secure && + env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { + framesize = 0xa8; + } else { + framesize = 0x68; + } + } else { + framesize = 0x20; + } /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) xpsr |= XPSR_SPREALIGN; } - frameptr -= 0x20; + xpsr &= ~XPSR_SFPA; + if (env->v7m.secure && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + xpsr |= XPSR_SFPA; + } + + frameptr -= framesize; if (arm_feature(env, ARM_FEATURE_V8)) { uint32_t limit = v7m_sp_limit(env); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { + /* FPU is active, try to save its registers */ + bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; + + if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault because LSPACT and FPCA both set\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else if (!env->v7m.secure && !nsacr_cp10) { + qemu_log_mask(CPU_LOG_INT, + "...Secure UsageFault with CFSR.NOCP because " + "NSACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + } else { + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + /* Lazy stacking disabled, save registers now */ + int i; + bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, + arm_current_el(env) != 0); + + if (stacked_ok && !cpacr_pass) { + /* + * Take UsageFault if CPACR forbids access. The pseudocode + * here does a full CheckCPEnabled() but we know the NSACR + * check can never fail as we have already handled that. + */ + qemu_log_mask(CPU_LOG_INT, + "...UsageFault with CFSR.NOCP because " + "CPACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = frameptr + 0x20 + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, frameptr + 0x60, + vfp_get_fpscr(env), mmu_idx, false); + if (cpacr_pass) { + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + /* Lazy stacking enabled, save necessary info to stack later */ + /* TODO : equivalent of UpdateFPCCR() pseudocode */ + } + } + } + /* * If we broke a stack limit then SP was already updated earlier; * otherwise we update SP regardless of whether any of the stack @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | - R_V7M_EXCRET_DCRS_MASK | - R_V7M_EXCRET_FTYPE_MASK; + R_V7M_EXCRET_DCRS_MASK; /* The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (env->v7m.secure) { lr |= R_V7M_EXCRET_S_MASK; } + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } } else { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_S_MASK | -- 2.20.1 Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org --- target/arm/cpu.h | 14 +++++++++ hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++ target/arm/helper.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +{ + /* + * Return whether an exception is "ready", i.e. it is enabled and is + * configured at a priority which would allow it to interrupt the + * current execution priority. + * + * irq and secure have the same semantics as for armv7m_nvic_set_pending(): + * for non-banked exceptions secure is always false; for banked exceptions + * it indicates which of the exceptions is required. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + int running = nvic_exec_prio(s); + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + /* + * HardFault is an odd special case: we always check against -1, + * even if we're secure and HardFault has priority -3; we never + * need to check for enabled state. + */ + if (irq == ARMV7M_EXCP_HARD) { + return running > -1; + } + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + return vec->enabled && + exc_group_prio(s, vec->prio, secure) < running; +} + /* callback when external interrupt line is changed */ static void set_irq_level(void *opaque, int n, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->thumb = addr & 1; } +static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, + bool apply_splim) +{ + /* + * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR + * that we will need later in order to do lazy FP reg stacking. + */ + bool is_secure = env->v7m.secure; + void *nvic = env->nvic; + /* + * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits + * are banked and we want to update the bit in the bank for the + * current security state; and in one case we want to specifically + * update the NS banked version of a bit even if we are secure. + */ + uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; + uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; + uint32_t *fpccr = &env->v7m.fpccr[is_secure]; + bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; + + env->v7m.fpcar[is_secure] = frameptr & ~0x7; + + if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { + bool splimviol; + uint32_t splim = v7m_sp_limit(env); + bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && + (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); + + splimviol = !ign && frameptr < splim; + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); + } + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); + + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, + !arm_v7m_is_handler_mode(env)); + + hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + + bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + + mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); + + ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); + *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); + + monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); + + sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); + } +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } else { /* Lazy stacking enabled, save necessary info to stack later */ - /* TODO : equivalent of UpdateFPCCR() pseudocode */ + v7m_update_fpccr(env, frameptr + 0x20, true); } } } -- 2.20.1 For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) /* translate.c should have made BXNS UNDEF unless we're secure */ assert(env->v7m.secure); + if (!(dest & 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + } switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) */ write_v7m_exception(env, 1); } + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; -- 2.20.1 The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", targets_secure ? "secure" : "nonsecure", exc); + if (dotailchain) { + /* Sanitize LR FType and PREFIX bits */ + if (!arm_feature(env, ARM_FEATURE_VFP)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } + lr = deposit32(lr, 24, 8, 0xff); + } + if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { -- 2.20.1 The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org --- target/arm/helper.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ load_fail: return false; } +static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) +{ + /* + * Return the integrity signature value for the callee-saves + * stack frame section. @lr is the exception return payload/LR value + * whose FType bit forms bit 0 of the signature if FP is present. + */ + uint32_t sig = 0xfefa125a; + + if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + sig |= 1; + } + return sig; +} + static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool stacked_ok; uint32_t limit; bool want_psp; + uint32_t sig; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, /* Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ + sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (return_to_secure && ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { - uint32_t expected_sig = 0xfefa125b; uint32_t actual_sig; pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); - if (pop_ok && expected_sig != actual_sig) { + if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); -- 2.20.1 Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org --- target/arm/helper.c | 142 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool rettobase = false; bool exc_secure = false; bool return_to_secure; + bool ftype; + bool restore_s16_s31; /* If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) excret); } + ftype = excret & R_V7M_EXCRET_FTYPE_MASK; + + if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " + "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " + "if FPU not present\n", + excret); + ftype = true; + } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { /* EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + /* + * Clear scratch FP values left in caller saved registers; this + * must happen before any kind of tail chaining. + */ + if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " + "stackframe: error during lazy state deactivation\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else { + /* Clear s0..s15 and FPSCR */ + int i; + + for (i = 0; i < 16; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + if (!ftype) { + /* FP present and we need to handle it */ + if (!return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking SecureFault on existing stackframe: " + "Secure LSPACT set but exception return is " + "not to secure state\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + restore_s16_s31 = return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + + if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FPU is still valid, just clear LSPACT */ + env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + int i; + uint32_t fpscr; + bool cpacr_pass, nsacr_pass; + + cpacr_pass = v7m_cpacr_pass(env, return_to_secure, + return_to_priv); + nsacr_pass = return_to_secure || + extract32(env->v7m.nsacr, 10, 1); + + if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + return_to_secure); + env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking UsageFault on existing " + "stackframe: CPACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking Secure UsageFault on existing " + "stackframe: NSACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = frameptr + 0x20 + 4 * i; + + if (i >= 16) { + faddr += 8; /* Skip the slot for the FPSCR */ + } + + pop_ok = pop_ok && + v7m_stack_read(cpu, &slo, faddr, mmu_idx) && + v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); + + if (!pop_ok) { + break; + } + + dn = (uint64_t)shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + pop_ok = pop_ok && + v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); + if (pop_ok) { + vfp_set_fpscr(env, fpscr); + } + if (!pop_ok) { + /* + * These regs are 0 if security extension present; + * otherwise merely UNKNOWN. We zero always. + */ + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + } + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, FPCA, !ftype); + /* Commit to consuming the stack frame */ frameptr += 0x20; + if (!ftype) { + frameptr += 0x48; + if (restore_s16_s31) { + frameptr += 0x40; + } + } /* Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) *frame_sp_p = frameptr; } /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ - xpsr_write(env, xpsr, ~XPSR_SPREALIGN); + xpsr_write(env, xpsr, ~(XPSR_SPREALIGN | XPSR_SFPA)); + + if (env->v7m.secure) { + bool sfpa = xpsr & XPSR_SFPA; + + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, SFPA, sfpa); + } /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the -- 2.20.1 Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org --- target/arm/cpu.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * Indicates whether cp register reads and writes by guest code should access + * the secure or nonsecure bank of banked registers; note that this is not + * the same thing as the current security state of the processor! + */ +FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) * checks on the other bits at runtime */ FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) -/* Indicates whether cp register reads and writes by guest code should access - * the secure or nonsecure bank of banked registers; note that this is not - * the same thing as the current security state of the processor! - */ -FIELD(TBFLAG_A32, NS, 19, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ -- 2.20.1 We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++---- target/arm/cpu.c | 7 +++++++ target/arm/helper.c | 6 +++++- target/arm/translate.c | 9 +++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * We store the bottom two bits of the CPAR as TB flags and handle + * checks on the other bits at runtime. This shares the same bits as + * VECSTRIDE, which is OK as no XScale CPU has VFP. + */ +FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) -/* We store the bottom two bits of the CPAR as TB flags and handle - * checks on the other bits at runtime - */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_THUMB_DSP); } + /* + * We rely on no XScale CPU having VFP so we can use the same bits in the + * TB flags field for VECSTRIDE and XSCALE_CPAR. + */ + assert(!(arm_feature(env, ARM_FEATURE_VFP) && + arm_feature(env, ARM_FEATURE_XSCALE))); + if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && !arm_feature(env, ARM_FEATURE_PMSA)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); + /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } } flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->vec_stride = 0; + } else { + dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->c15_cpar = 0; + } dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); -- 2.20.1 The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 5 +++++ target/arm/translate.c | 20 ++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.S does not match current security state */ +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v7m_handler_mode; bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ + bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); } + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* Handle M-profile lazy FP state mechanics */ + + /* Update ownership of FP context: set FPCCR.S to match current state */ + if (s->v8m_fpccr_s_wrong) { + TCGv_i32 tmp; + + tmp = load_cpu_field(v7m.fpccr[M_REG_S]); + if (s->v8m_secure) { + tcg_gen_ori_i32(tmp, tmp, R_V7M_FPCCR_S_MASK); + } else { + tcg_gen_andi_i32(tmp, tmp, ~R_V7M_FPCCR_S_MASK); + } + store_cpu_field(tmp, v7m.fpccr[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v8m_fpccr_s_wrong = false; + } + } + if (extract32(insn, 28, 4) == 0xf) { /* * Encodings with T=1 (Thumb) or unconditional (ARM): @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); + dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 13 +++++++++++++ target/arm/translate.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if we must create a new FP context */ +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ + bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); } + if (arm_feature(env, ARM_FEATURE_M) && + (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no active + * FP context; we must create a new FP context before executing + * any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) /* Don't need to do this for any further FP insns in this TB */ s->v8m_fpccr_s_wrong = false; } + + if (s->v7m_new_fp_ctxt_needed) { + /* + * Create new FP context by updating CONTROL.FPCA, CONTROL.SFPA + * and the FPSCR. + */ + TCGv_i32 control, fpscr; + uint32_t bits = R_V7M_CONTROL_FPCA_MASK; + + fpscr = load_cpu_field(v7m.fpdscr[s->v8m_secure]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + /* + * We don't need to arrange to end the TB, because the only + * parts of FPSCR which we cache in the TB flags are the VECLEN + * and VECSTRIDE, and those don't exist for M-profile. + */ + + if (s->v8m_secure) { + bits |= R_V7M_CONTROL_SFPA_MASK; + } + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_ori_i32(control, control, bits); + store_cpu_field(control, v7m.control[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v7m_new_fp_ctxt_needed = false; + } } if (extract32(insn, 28, 4) == 0xf) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); + dc->v7m_new_fp_ctxt_needed = + FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } } +/* + * Return the MMU index for a v7M CPU with all relevant information + * manually specified. + */ +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri); + /* Return the MMU index for a v7M CPU in the specified security and * privilege state. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) { ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, mmu_idx |= ARM_MMU_IDX_M_PRIV; } - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + if (negpri) { mmu_idx |= ARM_MMU_IDX_M_NEGPRI; } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, return mmu_idx; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { -- 2.20.1 In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org --- target/arm/cpu.h | 12 ++++++ hw/intc/armv7m_nvic.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) do_armv7m_nvic_set_pending(opaque, irq, secure, true); } +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +{ + /* + * Pend an exception during lazy FP stacking. This differs + * from the usual exception pending because the logic for + * whether we should escalate depends on the saved context + * in the FPCCR register, not on the current state of the CPU/NVIC. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + bool targets_secure; + bool escalate = false; + /* + * We will only look at bits in fpccr if this is a banked exception + * (in which case 'secure' tells us whether it is the S or NS version). + * All the bits for the non-banked exceptions are in fpccr_s. + */ + uint32_t fpccr_s = s->cpu->env.v7m.fpccr[M_REG_S]; + uint32_t fpccr = s->cpu->env.v7m.fpccr[secure]; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + targets_secure = banked ? secure : exc_targets_secure(s, irq); + + switch (irq) { + case ARMV7M_EXCP_DEBUG: + if (!(fpccr_s & R_V7M_FPCCR_MONRDY_MASK)) { + /* Ignore DebugMonitor exception */ + return; + } + break; + case ARMV7M_EXCP_MEM: + escalate = !(fpccr & R_V7M_FPCCR_MMRDY_MASK); + break; + case ARMV7M_EXCP_USAGE: + escalate = !(fpccr & R_V7M_FPCCR_UFRDY_MASK); + break; + case ARMV7M_EXCP_BUS: + escalate = !(fpccr_s & R_V7M_FPCCR_BFRDY_MASK); + break; + case ARMV7M_EXCP_SECURE: + escalate = !(fpccr_s & R_V7M_FPCCR_SFRDY_MASK); + break; + default: + g_assert_not_reached(); + } + + if (escalate) { + /* + * Escalate to HardFault: faults that initially targeted Secure + * continue to do so, even if HF normally targets NonSecure. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (targets_secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + } + + if (!vec->enabled || + nvic_exec_prio(s) <= exc_group_prio(s, vec->prio, secure)) { + if (!(fpccr_s & R_V7M_FPCCR_HFRDY_MASK)) { + /* + * We want to escalate to HardFault but the context the + * FP state belongs to prevents the exception pre-empting. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate to HardFault during " + "lazy FP register stacking\n"); + } + } + + if (escalate) { + s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } + if (!vec->pending) { + vec->pending = 1; + /* + * We do not call nvic_irq_update(), because we know our caller + * is going to handle causing us to take the exception by + * raising EXCP_LAZYFP, so raising the IRQ line would be + * pointless extra work. We just need to recompute the + * priorities so that armv7m_nvic_can_take_pending_exception() + * returns the right answer. + */ + nvic_recompute_state(s); + } +} + /* Make pending IRQ active. */ void armv7m_nvic_acknowledge_irq(void *opaque) { -- 2.20.1 Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org --- target/arm/helper.c | 118 +++++++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 39 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) } } +/* + * What kind of stack write are we doing? This affects how exceptions + * generated during the stacking are treated. + */ +typedef enum StackingMode { + STACK_NORMAL, + STACK_IGNFAULTS, + STACK_LAZYFP, +} StackingMode; + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, - ARMMMUIdx mmu_idx, bool ignfault) + ARMMMUIdx mmu_idx, StackingMode mode) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, &attrs, &prot, &page_size, &fi, NULL)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { - qemu_log_mask(CPU_LOG_INT, - "...SecureFault with SFSR.AUVIOL during stacking\n"); - env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.LSPERR " + "during lazy stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL " + "during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; + } + env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; env->v7m.sfar = addr; exc = ARMV7M_EXCP_SECURE; exc_secure = false; } else { - qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); - env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MLSPERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + } exc = ARMV7M_EXCP_MEM; exc_secure = secure; } @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ - qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + } exc = ARMV7M_EXCP_BUS; exc_secure = false; goto pend_fault; @@ -XXX,XX +XXX,XX @@ pend_fault: * later if we have two derived exceptions. * The only case when we must not pend the exception but instead * throw it away is if we are doing the push of the callee registers - * and we've already generated a derived exception. Even in this - * case we will still update the fault status registers. + * and we've already generated a derived exception (this is indicated + * by the caller passing STACK_IGNFAULTS). Even in this case we will + * still update the fault status registers. */ - if (!ignfault) { + switch (mode) { + case STACK_NORMAL: armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + break; + case STACK_LAZYFP: + armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); + break; + case STACK_IGNFAULTS: + break; } return false; } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t limit; bool want_psp; uint32_t sig; + StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, - ignore_faults); + v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); /* Update SP regardless of whether any of the stack accesses failed. */ *frame_sp_p = frameptr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * if it has higher priority). */ stacked_ok = stacked_ok && - v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { /* FPU is active, try to save its registers */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) faddr += 8; /* skip the slot for the FPSCR */ } stacked_ok = stacked_ok && - v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && - v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + v7m_stack_write(cpu, faddr, slo, + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, faddr + 4, shi, + mmu_idx, STACK_NORMAL); } stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr + 0x60, - vfp_get_fpscr(env), mmu_idx, false); + vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); if (cpacr_pass) { for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { *aa32_vfp_dreg(env, i / 2) = 0; -- 2.20.1 The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++ target/arm/helper.h | 2 + target/arm/translate.h | 1 + target/arm/helper.c | 112 +++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 22 ++++++++ 5 files changed, 140 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ +#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.LSPACT is set */ +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* For M profile only, set if we must create a new FP context */ FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_blxns, void, env, i32) DEF_HELPER_3(v7m_tt, i32, env, i32, i32) +DEF_HELPER_1(v7m_preserve_fp_state, void, env) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ + bool v7m_lspact; /* FPCCR.LSPACT set */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) g_assert_not_reached(); } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* + * Preserve FP state (because LSPACT was set and we are about + * to execute an FP instruction). This corresponds to the + * PreserveFPState() pseudocode. + * We may throw an exception if the stacking fails. + */ + ARMCPU *cpu = arm_env_get_cpu(env); + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); + bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); + bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; + uint32_t fpcar = env->v7m.fpcar[is_secure]; + bool stacked_ok = true; + bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + bool take_exception; + + /* Take the iothread lock as we are going to touch the NVIC */ + qemu_mutex_lock_iothread(); + + /* Check the background context had access to the FPU */ + if (!v7m_cpacr_pass(env, is_secure, is_priv)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); + env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + if (!splimviol && stacked_ok) { + /* We only stack if the stack limit wasn't violated */ + int i; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fpcar + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); + } + + stacked_ok = stacked_ok && + v7m_stack_write(cpu, fpcar + 0x40, + vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); + } + + /* + * We definitely pended an exception, but it's possible that it + * might not be able to be taken now. If its priority permits us + * to take it now, then we must not update the LSPACT or FP regs, + * but instead jump out to take the exception immediately. + * If it's just pending and won't be taken until the current + * handler exits, then we do update LSPACT and the FP regs. + */ + take_exception = !stacked_ok && + armv7m_nvic_can_take_pending_exception(env->nvic); + + qemu_mutex_unlock_iothread(); + + if (take_exception) { + raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); + } + + env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + + if (ts) { + /* Clear s0 to s31 and the FPSCR */ + int i; + + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + /* + * Otherwise s0 to s15 and FPSCR are UNKNOWN; we choose to leave them + * unchanged. + */ +} + /* Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_NOCP] = "v7M NOCP UsageFault", [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } break; + case EXCP_LAZYFP: + /* + * We already pended the specific exception in the NVIC in the + * v7m_preserve_fp_state() helper function. + */ + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); } + if (arm_feature(env, ARM_FEATURE_M)) { + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { /* Handle M-profile lazy FP state mechanics */ + /* Trigger lazy-state preservation if necessary */ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount. + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } + /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { TCGv_i32 tmp; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_A32, LSPACT); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org --- target/arm/cpu.h | 2 + target/arm/helper.h | 2 + target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 15 +++++++- 4 files changed, 102 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ +#define EXCP_LSERR 21 /* v8M LSERR SecureFault */ +#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) +DEF_HELPER_2(v7m_vlstm, void, env, i32) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) g_assert_not_reached(); } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, } } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we store the FP regs to */ + bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; + + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (lspact) { + /* LSPACT should not be active when there is active FP state */ + raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); + } + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + /* + * Note that we do not use v7m_stack_write() here, because the + * accesses should not set the FSR bits for stacking errors if they + * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK + * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions + * and longjmp out. + */ + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fptr + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + cpu_stl_data(env, faddr, slo); + cpu_stl_data(env, faddr + 4, shi); + } + cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env)); + + /* + * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to + * leave them unchanged, matching our choice in v7m_preserve_fp_state. + */ + if (ts) { + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + v7m_update_fpccr(env, fptr, false); + } + + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; break; + case EXCP_LSERR: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + break; + case EXCP_UNALIGNED: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + break; case EXCP_SWI: /* The PC already points to the next instruction. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) if (!s->v8m_secure || (insn & 0x0040f0ff)) { goto illegal_op; } - /* Just NOP since FP support is not implemented */ + + if (arm_dc_feature(s, ARM_FEATURE_VFP)) { + TCGv_i32 fptr = load_reg(s, rn); + + if (extract32(insn, 20, 1)) { + /* VLLDM */ + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + } break; } if (arm_dc_feature(s, ARM_FEATURE_VFP) && -- 2.20.1 Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 54 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 2 +- 3 files changed, 56 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) DEF_HELPER_2(v7m_vlstm, void, env, i32) +DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) g_assert_not_reached(); } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we load the FP regs from */ + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FP is still valid */ + env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + uint32_t fpscr; + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = fptr + 4 * i; + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + + slo = cpu_ldl_data(env, faddr); + shi = cpu_ldl_data(env, faddr + 4); + + dn = (uint64_t) shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + fpscr = cpu_ldl_data(env, fptr + 0x40); + vfp_set_fpscr(env, fpscr); + } + + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) TCGv_i32 fptr = load_reg(s, rn); if (extract32(insn, 20, 1)) { - /* VLLDM */ + gen_helper_v7m_vlldm(cpu_env, fptr); } else { gen_helper_v7m_vlstm(cpu_env, fptr); } -- 2.20.1 Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000200; cpu->id_dfr0 = 0x00100000; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000210; cpu->id_dfr0 = 0x00200000; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This device is used by both ARM (BCM2836, for raspi2) and AArch64 (BCM2837, for raspi3) targets, and is not CPU-specific. Move it to common object, so we build it once for all targets. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190427133028.12874-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/Makefile.objs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Makefile.objs +++ b/hw/dma/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o -obj-$(CONFIG_RASPI) += bcm2835_dma.o +common-obj-$(CONFIG_RASPI) += bcm2835_dma.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), + TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, + 0x60); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, + 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" #include "hw/bt.h" @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR); + dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); qdev_connect_gpio_out(dev, 0, tmp_irq); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set() functions since their introduction in commit 88d2c950b002. Time to remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-4-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- hw/display/tc6393xb.c | 16 ---------------- 2 files changed, 19 deletions(-) diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void retu_key_event(void *retu, int state); typedef struct TC6393xbState TC6393xbState; TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, uint32_t base, qemu_irq irq); -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler); -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); qemu_irq tc6393xb_l3v_get(TC6393xbState *s); #endif diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ struct TC6393xbState { blanked : 1; }; -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s) -{ - return s->gpio_in; -} - static void tc6393xb_gpio_set(void *opaque, int line, int level) { // TC6393xbState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void tc6393xb_gpio_set(void *opaque, int line, int level) // FIXME: how does the chip reflect the GPIO input level change? } -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler) -{ - if (line >= TC6393XB_GPIOS) { - fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); - return; - } - - s->handler[line] = handler; -} - static void tc6393xb_gpio_handler_update(TC6393xbState *s) { uint32_t level, diff; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 6 ------ include/hw/display/tc6393xb.h | 24 ++++++++++++++++++++++++ hw/arm/tosa.c | 2 +- hw/display/tc6393xb.c | 2 +- MAINTAINERS | 1 + 5 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/tc6393xb.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tahvo_init(qemu_irq irq, int betty); void retu_key_event(void *retu, int state); -/* tc6393xb.c */ -typedef struct TC6393xbState TC6393xbState; -TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, - uint32_t base, qemu_irq irq); -qemu_irq tc6393xb_l3v_get(TC6393xbState *s); - #endif diff --git a/include/hw/display/tc6393xb.h b/include/hw/display/tc6393xb.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/tc6393xb.h @@ -XXX,XX +XXX,XX @@ +/* + * Toshiba TC6393XB I/O Controller. + * Found in Sharp Zaurus SL-6000 (tosa) or some + * Toshiba e-Series PDAs. + * + * Copyright (c) 2007 Hervé Poussineau + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_TC6393XB_H +#define HW_DISPLAY_TC6393XB_H + +#include "exec/memory.h" +#include "hw/irq.h" + +typedef struct TC6393xbState TC6393xbState; + +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +#endif diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "hw/arm/pxa.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" +#include "hw/display/tc6393xb.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/sysbus.h" diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/host-utils.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/display/tc6393xb.h" #include "hw/block/flash.h" #include "ui/console.h" #include "ui/pixel_ops.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/mst_fpga.c F: hw/misc/max111x.c F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h +F: include/hw/display/tc6393xb.h SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 7 ------- include/hw/display/blizzard.h | 22 ++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/display/blizzard.c | 2 +- MAINTAINERS | 2 ++ 5 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/blizzard.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* blizzard.c */ -void *s1d13745_init(qemu_irq gpio_int); -void s1d13745_write(void *opaque, int dc, uint16_t value); -void s1d13745_write_block(void *opaque, int dc, - void *buf, size_t len, int pitch); -uint16_t s1d13745_read(void *opaque, int dc); - /* cbus.c */ typedef struct { qemu_irq clk; diff --git a/include/hw/display/blizzard.h b/include/hw/display/blizzard.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/blizzard.h @@ -XXX,XX +XXX,XX @@ +/* + * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_BLIZZARD_H +#define HW_DISPLAY_BLIZZARD_H + +#include "hw/irq.h" + +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/display/blizzard.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/display/blizzard.c b/hw/display/blizzard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/blizzard.c +++ b/hw/display/blizzard.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/display/blizzard.h" #include "ui/pixel_ops.h" typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/nseries.c +F: hw/display/blizzard.c F: hw/input/lm832x.c F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c +F: include/hw/display/blizzard.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 14 -------------- include/hw/misc/cbus.h | 32 ++++++++++++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/misc/cbus.c | 2 +- MAINTAINERS | 1 + 5 files changed, 35 insertions(+), 15 deletions(-) create mode 100644 include/hw/misc/cbus.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* cbus.c */ -typedef struct { - qemu_irq clk; - qemu_irq dat; - qemu_irq sel; -} CBus; -CBus *cbus_init(qemu_irq dat_out); -void cbus_attach(CBus *bus, void *slave_opaque); - -void *retu_init(qemu_irq irq, int vilma); -void *tahvo_init(qemu_irq irq, int betty); - -void retu_key_event(void *retu, int state); - #endif diff --git a/include/hw/misc/cbus.h b/include/hw/misc/cbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/cbus.h @@ -XXX,XX +XXX,XX @@ +/* + * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma / + * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms. + * Based on reverse-engineering of a linux driver. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_MISC_CBUS_H +#define HW_MISC_CBUS_H + +#include "hw/irq.h" + +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; + +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c.h" #include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/misc/cbus.c b/hw/misc/cbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/cbus.c +++ b/hw/misc/cbus.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/devices.h" +#include "hw/misc/cbus.h" #include "sysemu/sysemu.h" //#define DEBUG diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/misc/cbus.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/input/gamepad.h | 19 +++++++++++++++++++ hw/arm/stellaris.c | 2 +- hw/input/stellaris_input.c | 2 +- MAINTAINERS | 1 + 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/hw/input/gamepad.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); -/* stellaris_input.c */ -void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); - #endif diff --git a/include/hw/input/gamepad.h b/include/hw/input/gamepad.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/gamepad.h @@ -XXX,XX +XXX,XX @@ +/* + * Gamepad style buttons connected to IRQ/GPIO lines + * + * Copyright (c) 2007 CodeSourcery. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_GAMEPAD_H +#define HW_INPUT_GAMEPAD_H + +#include "hw/irq.h" + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +#endif diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ssi/ssi.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/arm/armv7m.h" #include "hw/char/pl011.h" +#include "hw/input/gamepad.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/unimp.h" #include "cpu.h" diff --git a/hw/input/stellaris_input.c b/hw/input/stellaris_input.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/stellaris_input.c +++ b/hw/input/stellaris_input.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/input/gamepad.h" #include "ui/console.h" typedef struct { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/stellaris* +F: include/hw/input/gamepad.h Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +----- include/hw/devices.h | 15 --------------- include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 - hw/arm/nseries.c | 2 +- hw/arm/palm.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 ++-- MAINTAINERS | 2 ++ 9 files changed, 44 insertions(+), 26 deletions(-) create mode 100644 include/hw/input/tsc2xxx.h diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" # define hw_omap_h "omap.h" #include "hw/irq.h" +#include "hw/input/tsc2xxx.h" #include "target/arm/cpu-qom.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); -struct uWireSlave { - uint16_t (*receive)(void *opaque); - void (*send)(void *opaque, uint16_t data); - void *opaque; -}; struct omap_uwire_s; void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect); diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* Devices that have nowhere better to go. */ #include "hw/hw.h" -#include "ui/console.h" /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); @@ -XXX,XX +XXX,XX @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); /* lan9118.c */ void lan9118_init(NICInfo *, uint32_t, qemu_irq); -/* tsc210x.c */ -uWireSlave *tsc2102_init(qemu_irq pint); -uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); -I2SCodec *tsc210x_codec(uWireSlave *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info); -void tsc210x_key_event(uWireSlave *chip, int key, int down); - -/* tsc2005.c */ -void *tsc2005_init(qemu_irq pintdav); -uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); - #endif diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ +/* + * TI touchscreen controller + * + * Copyright (c) 2006 Andrzej Zaborowski + * Copyright (C) 2008 Nokia Corporation + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_TSC2XXX_H +#define HW_INPUT_TSC2XXX_H + +#include "hw/irq.h" +#include "ui/console.h" + +typedef struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +} uWireSlave; + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +#endif diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct RAMBlock RAMBlock; typedef struct Range Range; typedef struct SHPCDevice SHPCDevice; typedef struct SSIBus SSIBus; -typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice VirtIODevice; typedef struct Visitor Visitor; typedef void SaveStateHandler(QEMUFile *f, void *opaque); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" -#include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/input/tsc2xxx.h" #include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" #include "hw/boards.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "trace.h" #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10))) diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ -#include "hw/devices.h" +#include "hw/arm/omap.h" /* For I2SCodec */ +#include "hw/input/tsc2xxx.h" #define TSC_DATA_REGISTERS_PAGE 0x0 #define TSC_CONTROL_REGISTERS_PAGE 0x1 diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h Palm @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/palm.c F: hw/input/tsc210x.c +F: include/hw/input/tsc2xxx.h Raspberry Pi M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/net/lan9118.h | 19 +++++++++++++++++++ hw/arm/kzm.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 1 + hw/arm/vexpress.c | 2 +- hw/net/lan9118.c | 2 +- 7 files changed, 24 insertions(+), 7 deletions(-) create mode 100644 include/hw/net/lan9118.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); -/* lan9118.c */ -void lan9118_init(NICInfo *, uint32_t, qemu_irq); - #endif diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 Ethernet interface emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_H +#define HW_NET_LAN9118_H + +#include "hw/irq.h" +#include "net/net.h" + +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "exec/address-spaces.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/char/serial.h" #include "sysemu/qtest.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "net/net.h" typedef enum MPS2FPGAType { diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" #include "net/eth.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "sysemu/sysemu.h" #include "hw/ptimer.h" #include "qemu/log.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ne2000-isa.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/hw/net/ne2000-isa.h b/include/hw/net/ne2000-isa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ne2000-isa.h +++ b/include/hw/net/ne2000-isa.h @@ -XXX,XX +XXX,XX @@ * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ + +#ifndef HW_NET_NE2K_ISA_H +#define HW_NET_NE2K_ISA_H + #include "hw/hw.h" #include "hw/qdev.h" #include "hw/isa/isa.h" @@ -XXX,XX +XXX,XX @@ static inline ISADevice *isa_ne2000_init(ISABus *bus, int base, int irq, } return d; } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118.h | 2 ++ hw/arm/exynos4_boards.c | 3 ++- hw/arm/mps2-tz.c | 3 ++- hw/net/lan9118.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "net/net.h" +#define TYPE_LAN9118 "lan9118" + void lan9118_init(NICInfo *, uint32_t, qemu_irq); #endif diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" +#include "hw/net/lan9118.h" #include "hw/boards.h" #undef DEBUG @@ -XXX,XX +XXX,XX @@ static void lan9215_init(uint32_t base, qemu_irq irq) /* This should be a 9215 but the 9118 is close enough */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], "lan9118"); - dev = qdev_create(NULL, "lan9118"); + dev = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(dev, &nd_table[0]); qdev_prop_set_uint32(dev, "mode_16bit", 1); qdev_init_nofail(dev); diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, * except that it doesn't support the checksum-offload feature. */ qemu_check_nic_model(nd, "lan9118"); - mms->lan9118 = qdev_create(NULL, "lan9118"); + mms->lan9118 = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(mms->lan9118, nd); qdev_init_nofail(mms->lan9118); diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_packet = { } }; -#define TYPE_LAN9118 "lan9118" #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118) typedef struct { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 11 ----------- include/hw/net/smc91c111.h | 19 +++++++++++++++++++ hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/net/smc91c111.c | 2 +- 8 files changed, 25 insertions(+), 17 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/net/smc91c111.h diff --git a/include/hw/devices.h b/include/hw/devices.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/devices.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef QEMU_DEVICES_H -#define QEMU_DEVICES_H - -/* Devices that have nowhere better to go. */ - -#include "hw/hw.h" - -/* smc91c111.c */ -void smc91c111_init(NICInfo *, uint32_t, qemu_irq); - -#endif diff --git a/include/hw/net/smc91c111.h b/include/hw/net/smc91c111.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/smc91c111.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_SMC91C111_H +#define HW_NET_SMC91C111_H + +#include "hw/irq.h" +#include "net/net.h" + +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "net/net.h" #include "hw/block/flash.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/devices.h" #include "hw/boards.h" #include "hw/arm/arm.h" #include "hw/misc/arm_integrator_debug.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "hw/arm/arm.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "hw/block/flash.h" #include "hw/sysbus.h" diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" #include "hw/net/lan9118.h" +#include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "qemu/log.h" /* For crc32 */ #include <zlib.h> -- 2.20.1