Second lot of ARM changes to sneak in before freeze: * fixed version of the raspi2 sd controller patches * GICv3 save/restore * v7M QOMify I've also included the Linux header update patches stolen from Paolo's pullreq since it hasn't quite hit master yet. thanks -- PMM The following changes since commit 1bbe5dc66b770d7bedd1d51d7935da948a510dd6: Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170228' into staging (2017-02-28 14:50:17 +0000) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170228-1 for you to fetch changes up to 1eeb5c7deacbfb4d4cad17590a16a99f3d85eabb: bcm2835: add sdhost and gpio controllers (2017-02-28 17:10:00 +0000) ---------------------------------------------------------------- target-arm queue: * raspi2: add gpio controller and sdhost controller, with the wiring so the guest can switch which controller the SD card is attached to (this is sufficient to get raspbian kernels to boot) * GICv3: support state save/restore from KVM * update Linux headers to 4.11 * refactor and QOMify the ARMv7M container object ---------------------------------------------------------------- Clement Deschamps (3): hw/sd: add card-reparenting function bcm2835_gpio: add bcm2835 gpio controller bcm2835: add sdhost and gpio controllers Paolo Bonzini (2): update-linux-headers: update for 4.11 update Linux headers to 4.11 Peter Maydell (12): armv7m: Abstract out the "load kernel" code armv7m: Move NVICState struct definition into header armv7m: QOMify the armv7m container armv7m: Use QOMified armv7m object in armv7m_init() armv7m: Make ARMv7M object take memory region link armv7m: Make NVIC expose a memory region rather than mapping itself armv7m: Make bitband device take the address space to access armv7m: Don't put core v7M devices under CONFIG_STELLARIS armv7m: Split systick out from NVIC stm32f205: Create armv7m object without using armv7m_init() stm32f205: Rename 'nvic' local to 'armv7m' qdev: Have qdev_set_parent_bus() handle devices already on a bus Vijaya Kumar K (4): hw/intc/arm_gicv3_kvm: Add ICC_SRE_EL1 register to vmstate hw/intc/arm_gicv3_kvm: Implement get/put functions target-arm: Add GICv3CPUState in CPUARMState struct hw/intc/arm_gicv3_kvm: Reset GICv3 cpu interface registers hw/gpio/Makefile.objs | 1 + hw/intc/Makefile.objs | 2 +- hw/timer/Makefile.objs | 1 + hw/intc/gicv3_internal.h | 3 + include/hw/arm/arm.h | 12 + include/hw/arm/armv7m.h | 63 +++ include/hw/arm/armv7m_nvic.h | 62 ++ include/hw/arm/bcm2835_peripherals.h | 4 + include/hw/arm/stm32f205_soc.h | 4 +- include/hw/gpio/bcm2835_gpio.h | 39 ++ include/hw/intc/arm_gicv3_common.h | 1 + include/hw/sd/sd.h | 11 + include/hw/timer/armv7m_systick.h | 34 ++ include/standard-headers/asm-x86/hyperv.h | 8 + include/standard-headers/linux/input-event-codes.h | 2 +- include/standard-headers/linux/pci_regs.h | 25 + include/standard-headers/linux/virtio_ids.h | 1 + linux-headers/asm-arm/kvm.h | 15 + linux-headers/asm-arm/unistd-common.h | 357 ++++++++++++ linux-headers/asm-arm/unistd-eabi.h | 5 + linux-headers/asm-arm/unistd-oabi.h | 17 + linux-headers/asm-arm/unistd.h | 419 +------------- linux-headers/asm-arm64/kvm.h | 13 + linux-headers/asm-powerpc/kvm.h | 27 + linux-headers/asm-powerpc/unistd.h | 1 + linux-headers/asm-x86/kvm_para.h | 13 +- linux-headers/linux/kvm.h | 24 +- linux-headers/linux/kvm_para.h | 2 + linux-headers/linux/userfaultfd.h | 67 ++- linux-headers/linux/vfio.h | 10 + target/arm/cpu.h | 2 + hw/arm/armv7m.c | 379 ++++++++----- hw/arm/bcm2835_peripherals.c | 43 +- hw/arm/netduino2.c | 7 +- hw/arm/stm32f205_soc.c | 28 +- hw/core/qdev.c | 14 + hw/gpio/bcm2835_gpio.c | 353 ++++++++++++ hw/intc/arm_gicv3_common.c | 38 ++ hw/intc/arm_gicv3_cpuif.c | 8 + hw/intc/arm_gicv3_kvm.c | 629 ++++++++++++++++++++- hw/intc/armv7m_nvic.c | 214 ++----- hw/sd/core.c | 27 + hw/timer/armv7m_systick.c | 240 ++++++++ default-configs/arm-softmmu.mak | 2 + hw/timer/trace-events | 6 + scripts/update-linux-headers.sh | 13 +- 46 files changed, 2479 insertions(+), 767 deletions(-) create mode 100644 include/hw/arm/armv7m.h create mode 100644 include/hw/arm/armv7m_nvic.h create mode 100644 include/hw/gpio/bcm2835_gpio.h create mode 100644 include/hw/timer/armv7m_systick.h create mode 100644 linux-headers/asm-arm/unistd-common.h create mode 100644 linux-headers/asm-arm/unistd-eabi.h create mode 100644 linux-headers/asm-arm/unistd-oabi.h create mode 100644 hw/gpio/bcm2835_gpio.c create mode 100644 hw/timer/armv7m_systick.c Abstract the "load kernel" code out of armv7m_init() into its own function. This includes the registration of the CPU reset function, to parallel how we handle this for A profile cores. We make the function public so that boards which choose to directly instantiate an ARMv7M device object can call it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-2-git-send-email-peter.maydell@linaro.org --- include/hw/arm/arm.h | 12 ++++++++++++ hw/arm/armv7m.c | 23 ++++++++++++++++++----- 2 files changed, 30 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/arm.h b/include/hw/arm/arm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/arm.h +++ b/include/hw/arm/arm.h @@ -XXX,XX +XXX,XX @@ typedef enum { /* armv7m.c */ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, const char *kernel_filename, const char *cpu_model); +/** + * armv7m_load_kernel: + * @cpu: CPU + * @kernel_filename: file to load + * @mem_size: mem_size: maximum image size to load + * + * Load the guest image for an ARMv7M system. This must be called by + * any ARMv7M board, either directly or via armv7m_init(). (This is + * necessary to ensure that the CPU resets correctly on system reset, + * as well as for kernel loading.) + */ +void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size); /* * struct used as a parameter of the arm_load_kernel machine init diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, ARMCPU *cpu; CPUARMState *env; DeviceState *nvic; - int image_size; - uint64_t entry; - uint64_t lowaddr; - int big_endian; if (cpu_model == NULL) { cpu_model = "cortex-m3"; @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, qdev_init_nofail(nvic); sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); + armv7m_load_kernel(cpu, kernel_filename, mem_size); + return nvic; +} + +void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) +{ + int image_size; + uint64_t entry; + uint64_t lowaddr; + int big_endian; #ifdef TARGET_WORDS_BIGENDIAN big_endian = 1; @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, } } + /* CPU objects (unlike devices) are not automatically reset on system + * reset, so we must always register a handler to do so. Unlike + * A-profile CPUs, we don't need to do anything special in the + * handler to arrange that it starts correctly. + * This is arguably the wrong place to do this, but it matches the + * way A-profile does it. Note that this means that every M profile + * board must call this function! + */ qemu_register_reset(armv7m_reset, cpu); - return nvic; } static Property bitband_properties[] = { -- 2.7.4 Move the NVICState struct definition into a header, so we can embed it into other QOM objects like SoCs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-3-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m_nvic.h | 66 ++++++++++++++++++++++++++++++++++++++++++++ hw/intc/armv7m_nvic.c | 49 +------------------------------- 2 files changed, 67 insertions(+), 48 deletions(-) create mode 100644 include/hw/arm/armv7m_nvic.h diff --git a/include/hw/arm/armv7m_nvic.h b/include/hw/arm/armv7m_nvic.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M NVIC object + * + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell <peter.maydell@linaro.org> + * + * This code is licensed under the GPL version 2 or later. + */ + +#ifndef HW_ARM_ARMV7M_NVIC_H +#define HW_ARM_ARMV7M_NVIC_H + +#include "target/arm/cpu.h" +#include "hw/sysbus.h" + +#define TYPE_NVIC "armv7m_nvic" + +#define NVIC(obj) \ + OBJECT_CHECK(NVICState, (obj), TYPE_NVIC) + +/* Highest permitted number of exceptions (architectural limit) */ +#define NVIC_MAX_VECTORS 512 + +typedef struct VecInfo { + /* Exception priorities can range from -3 to 255; only the unmodifiable + * priority values for RESET, NMI and HardFault can be negative. + */ + int16_t prio; + uint8_t enabled; + uint8_t pending; + uint8_t active; + uint8_t level; /* exceptions <=15 never set level */ +} VecInfo; + +typedef struct NVICState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + ARMCPU *cpu; + + VecInfo vectors[NVIC_MAX_VECTORS]; + uint32_t prigroup; + + /* vectpending and exception_prio are both cached state that can + * be recalculated from the vectors[] array and the prigroup field. + */ + unsigned int vectpending; /* highest prio pending enabled exception */ + int exception_prio; /* group prio of the highest prio active exception */ + + struct { + uint32_t control; + uint32_t reload; + int64_t tick; + QEMUTimer *timer; + } systick; + + MemoryRegion sysregmem; + MemoryRegion container; + + uint32_t num_irq; + qemu_irq excpout; + qemu_irq sysresetreq; +} NVICState; + +#endif diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "qemu/timer.h" #include "hw/arm/arm.h" +#include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" #include "exec/address-spaces.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ * "exception" more or less interchangeably. */ #define NVIC_FIRST_IRQ 16 -#define NVIC_MAX_VECTORS 512 #define NVIC_MAX_IRQ (NVIC_MAX_VECTORS - NVIC_FIRST_IRQ) /* Effective running priority of the CPU when no exception is active @@ -XXX,XX +XXX,XX @@ */ #define NVIC_NOEXC_PRIO 0x100 -typedef struct VecInfo { - /* Exception priorities can range from -3 to 255; only the unmodifiable - * priority values for RESET, NMI and HardFault can be negative. - */ - int16_t prio; - uint8_t enabled; - uint8_t pending; - uint8_t active; - uint8_t level; /* exceptions <=15 never set level */ -} VecInfo; - -typedef struct NVICState { - /*< private >*/ - SysBusDevice parent_obj; - /*< public >*/ - - ARMCPU *cpu; - - VecInfo vectors[NVIC_MAX_VECTORS]; - uint32_t prigroup; - - /* vectpending and exception_prio are both cached state that can - * be recalculated from the vectors[] array and the prigroup field. - */ - unsigned int vectpending; /* highest prio pending enabled exception */ - int exception_prio; /* group prio of the highest prio active exception */ - - struct { - uint32_t control; - uint32_t reload; - int64_t tick; - QEMUTimer *timer; - } systick; - - MemoryRegion sysregmem; - MemoryRegion container; - - uint32_t num_irq; - qemu_irq excpout; - qemu_irq sysresetreq; -} NVICState; - -#define TYPE_NVIC "armv7m_nvic" - -#define NVIC(obj) \ - OBJECT_CHECK(NVICState, (obj), TYPE_NVIC) - static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 }; -- 2.7.4 Create a proper QOM object for the armv7m container, which holds the CPU, the NVIC and the bitband regions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-4-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 51 ++++++++++++++++++ hw/arm/armv7m.c | 139 +++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 178 insertions(+), 12 deletions(-) create mode 100644 include/hw/arm/armv7m.h diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M CPU object + * + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell <peter.maydell@linaro.org> + * + * This code is licensed under the GPL version 2 or later. + */ + +#ifndef HW_ARM_ARMV7M_H +#define HW_ARM_ARMV7M_H + +#include "hw/sysbus.h" +#include "hw/arm/armv7m_nvic.h" + +#define TYPE_BITBAND "ARM,bitband-memory" +#define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + MemoryRegion iomem; + uint32_t base; +} BitBandState; + +#define TYPE_ARMV7M "armv7m" +#define ARMV7M(obj) OBJECT_CHECK(ARMv7MState, (obj), TYPE_ARMV7M) + +#define ARMV7M_NUM_BITBANDS 2 + +/* ARMv7M container object. + * + Unnamed GPIO input lines: external IRQ lines for the NVIC + * + Named GPIO output SYSRESETREQ: signalled for guest AIRCR.SYSRESETREQ + * + Property "cpu-model": CPU model to instantiate + * + Property "num-irq": number of external IRQ lines + */ +typedef struct ARMv7MState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + NVICState nvic; + BitBandState bitband[ARMV7M_NUM_BITBANDS]; + ARMCPU *cpu; + + /* Properties */ + char *cpu_model; +} ARMv7MState; + +#endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "hw/arm/armv7m.h" #include "qapi/error.h" #include "qemu-common.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps bitband_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -#define TYPE_BITBAND "ARM,bitband-memory" -#define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) - -typedef struct { - /*< private >*/ - SysBusDevice parent_obj; - /*< public >*/ - - MemoryRegion iomem; - uint32_t base; -} BitBandState; - static void bitband_init(Object *obj) { BitBandState *s = BITBAND(obj); @@ -XXX,XX +XXX,XX @@ static void armv7m_bitband_init(void) /* Board init. */ +static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { + 0x20000000, 0x40000000 +}; + +static const hwaddr bitband_output_addr[ARMV7M_NUM_BITBANDS] = { + 0x22000000, 0x42000000 +}; + +static void armv7m_instance_init(Object *obj) +{ + ARMv7MState *s = ARMV7M(obj); + int i; + + /* Can't init the cpu here, we don't yet know which model to use */ + + object_initialize(&s->nvic, sizeof(s->nvic), "armv7m_nvic"); + qdev_set_parent_bus(DEVICE(&s->nvic), sysbus_get_default()); + object_property_add_alias(obj, "num-irq", + OBJECT(&s->nvic), "num-irq", &error_abort); + + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + object_initialize(&s->bitband[i], sizeof(s->bitband[i]), TYPE_BITBAND); + qdev_set_parent_bus(DEVICE(&s->bitband[i]), sysbus_get_default()); + } +} + +static void armv7m_realize(DeviceState *dev, Error **errp) +{ + ARMv7MState *s = ARMV7M(dev); + Error *err = NULL; + int i; + char **cpustr; + ObjectClass *oc; + const char *typename; + CPUClass *cc; + + cpustr = g_strsplit(s->cpu_model, ",", 2); + + oc = cpu_class_by_name(TYPE_ARM_CPU, cpustr[0]); + if (!oc) { + error_setg(errp, "Unknown CPU model %s", cpustr[0]); + g_strfreev(cpustr); + return; + } + + cc = CPU_CLASS(oc); + typename = object_class_get_name(oc); + cc->parse_features(typename, cpustr[1], &err); + g_strfreev(cpustr); + if (err) { + error_propagate(errp, err); + return; + } + + s->cpu = ARM_CPU(object_new(typename)); + if (!s->cpu) { + error_setg(errp, "Unknown CPU model %s", s->cpu_model); + return; + } + + object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + /* Note that we must realize the NVIC after the CPU */ + object_property_set_bool(OBJECT(&s->nvic), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + /* Alias the NVIC's input and output GPIOs as our own so the board + * code can wire them up. (We do this in realize because the + * NVIC doesn't create the input GPIO array until realize.) + */ + qdev_pass_gpios(DEVICE(&s->nvic), dev, NULL); + qdev_pass_gpios(DEVICE(&s->nvic), dev, "SYSRESETREQ"); + + /* Wire the NVIC up to the CPU */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->nvic), 0, + qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); + s->cpu->env.nvic = &s->nvic; + + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + Object *obj = OBJECT(&s->bitband[i]); + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); + + object_property_set_int(obj, bitband_input_addr[i], "base", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + object_property_set_bool(obj, true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + sysbus_mmio_map(sbd, 0, bitband_output_addr[i]); + } +} + +static Property armv7m_properties[] = { + DEFINE_PROP_STRING("cpu-model", ARMv7MState, cpu_model), + DEFINE_PROP_END_OF_LIST(), +}; + +static void armv7m_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = armv7m_realize; + dc->props = armv7m_properties; +} + +static const TypeInfo armv7m_info = { + .name = TYPE_ARMV7M, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ARMv7MState), + .instance_init = armv7m_instance_init, + .class_init = armv7m_class_init, +}; + static void armv7m_reset(void *opaque) { ARMCPU *cpu = opaque; @@ -XXX,XX +XXX,XX @@ static const TypeInfo bitband_info = { static void armv7m_register_types(void) { type_register_static(&bitband_info); + type_register_static(&armv7m_info); } type_init(armv7m_register_types) -- 2.7.4 Make the legacy armv7m_init() function use the newly QOMified armv7m object rather than doing everything by hand. We can return the armv7m object rather than the NVIC from armv7m_init() because its interface to the rest of the board (GPIOs, etc) is identical. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-5-git-send-email-peter.maydell@linaro.org --- hw/arm/armv7m.c | 49 ++++++++++++------------------------------------- 1 file changed, 12 insertions(+), 37 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void bitband_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } -static void armv7m_bitband_init(void) -{ - DeviceState *dev; - - dev = qdev_create(NULL, TYPE_BITBAND); - qdev_prop_set_uint32(dev, "base", 0x20000000); - qdev_init_nofail(dev); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x22000000); - - dev = qdev_create(NULL, TYPE_BITBAND); - qdev_prop_set_uint32(dev, "base", 0x40000000); - qdev_init_nofail(dev); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x42000000); -} - /* Board init. */ static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { @@ -XXX,XX +XXX,XX @@ static void armv7m_reset(void *opaque) /* Init CPU and memory for a v7-M based board. mem_size is in bytes. - Returns the NVIC array. */ + Returns the ARMv7M device. */ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, const char *kernel_filename, const char *cpu_model) { - ARMCPU *cpu; - CPUARMState *env; - DeviceState *nvic; + DeviceState *armv7m; if (cpu_model == NULL) { - cpu_model = "cortex-m3"; + cpu_model = "cortex-m3"; } - cpu = cpu_arm_init(cpu_model); - if (cpu == NULL) { - fprintf(stderr, "Unable to find CPU definition\n"); - exit(1); - } - env = &cpu->env; - - armv7m_bitband_init(); - - nvic = qdev_create(NULL, "armv7m_nvic"); - qdev_prop_set_uint32(nvic, "num-irq", num_irq); - env->nvic = nvic; - qdev_init_nofail(nvic); - sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, - qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); - armv7m_load_kernel(cpu, kernel_filename, mem_size); - return nvic; + + armv7m = qdev_create(NULL, "armv7m"); + qdev_prop_set_uint32(armv7m, "num-irq", num_irq); + qdev_prop_set_string(armv7m, "cpu-model", cpu_model); + /* This will exit with an error if the user passed us a bad cpu_model */ + qdev_init_nofail(armv7m); + + armv7m_load_kernel(ARM_CPU(first_cpu), kernel_filename, mem_size); + return armv7m; } void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) -- 2.7.4 Make the ARMv7M object take a memory region link which it uses to wire up the bitband rather than having them always put themselves in the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-6-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 10 ++++++++++ hw/arm/armv7m.c | 23 ++++++++++++++++++++++- 2 files changed, 32 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * + Named GPIO output SYSRESETREQ: signalled for guest AIRCR.SYSRESETREQ * + Property "cpu-model": CPU model to instantiate * + Property "num-irq": number of external IRQ lines + * + Property "memory": MemoryRegion defining the physical address space + * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal + * devices will be automatically layered on top of this view.) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { BitBandState bitband[ARMV7M_NUM_BITBANDS]; ARMCPU *cpu; + /* MemoryRegion we pass to the CPU, with our devices layered on + * top of the ones the board provides in board_memory. + */ + MemoryRegion container; + /* Properties */ char *cpu_model; + /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ + MemoryRegion *board_memory; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ #include "elf.h" #include "sysemu/qtest.h" #include "qemu/error-report.h" +#include "exec/address-spaces.h" /* Bitbanded IO. Each word corresponds to a single bit. */ @@ -XXX,XX +XXX,XX @@ static void armv7m_instance_init(Object *obj) /* Can't init the cpu here, we don't yet know which model to use */ + object_property_add_link(obj, "memory", + TYPE_MEMORY_REGION, + (Object **)&s->board_memory, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + memory_region_init(&s->container, obj, "armv7m-container", UINT64_MAX); + object_initialize(&s->nvic, sizeof(s->nvic), "armv7m_nvic"); qdev_set_parent_bus(DEVICE(&s->nvic), sysbus_get_default()); object_property_add_alias(obj, "num-irq", @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) const char *typename; CPUClass *cc; + if (!s->board_memory) { + error_setg(errp, "memory property was not set"); + return; + } + + memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); + cpustr = g_strsplit(s->cpu_model, ",", 2); oc = cpu_class_by_name(TYPE_ARM_CPU, cpustr[0]); @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } + object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory", + &error_abort); object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } - sysbus_mmio_map(sbd, 0, bitband_output_addr[i]); + memory_region_add_subregion(&s->container, bitband_output_addr[i], + sysbus_mmio_get_region(sbd, 0)); } } @@ -XXX,XX +XXX,XX @@ DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, armv7m = qdev_create(NULL, "armv7m"); qdev_prop_set_uint32(armv7m, "num-irq", num_irq); qdev_prop_set_string(armv7m, "cpu-model", cpu_model); + object_property_set_link(OBJECT(armv7m), OBJECT(get_system_memory()), + "memory", &error_abort); /* This will exit with an error if the user passed us a bad cpu_model */ qdev_init_nofail(armv7m); -- 2.7.4 Make the NVIC device expose a memory region for its users to map, rather than mapping itself into the system memory space on realize, and get the one user (the ARMv7M object) to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-7-git-send-email-peter.maydell@linaro.org --- hw/arm/armv7m.c | 7 ++++++- hw/intc/armv7m_nvic.c | 7 ++----- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_instance_init(Object *obj) static void armv7m_realize(DeviceState *dev, Error **errp) { ARMv7MState *s = ARMV7M(dev); + SysBusDevice *sbd; Error *err = NULL; int i; char **cpustr; @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) qdev_pass_gpios(DEVICE(&s->nvic), dev, "SYSRESETREQ"); /* Wire the NVIC up to the CPU */ - sysbus_connect_irq(SYS_BUS_DEVICE(&s->nvic), 0, + sbd = SYS_BUS_DEVICE(&s->nvic); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); s->cpu->env.nvic = &s->nvic; + memory_region_add_subregion(&s->container, 0xe000e000, + sysbus_mmio_get_region(sbd, 0)); + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { Object *obj = OBJECT(&s->bitband[i]); SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/armv7m_nvic.h" #include "target/arm/cpu.h" -#include "exec/address-spaces.h" #include "qemu/log.h" #include "trace.h" @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) "nvic_sysregs", 0x1000); memory_region_add_subregion(&s->container, 0, &s->sysregmem); - /* Map the whole thing into system memory at the location required - * by the v7M architecture. - */ - memory_region_add_subregion(get_system_memory(), 0xe000e000, &s->container); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container); + s->systick.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); } -- 2.7.4 Instead of the bitband device doing a cpu_physical_memory_read/write, make it take a MemoryRegion which specifies where it should be accessing, and use address_space_read/write to access the corresponding AddressSpace. Since this entails pretty much a rewrite, convert away from old_mmio in the process. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-8-git-send-email-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 2 + hw/arm/armv7m.c | 166 +++++++++++++++++++++++------------------------- 2 files changed, 81 insertions(+), 87 deletions(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { SysBusDevice parent_obj; /*< public >*/ + AddressSpace *source_as; MemoryRegion iomem; uint32_t base; + MemoryRegion *source_memory; } BitBandState; #define TYPE_ARMV7M "armv7m" diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ /* Bitbanded IO. Each word corresponds to a single bit. */ /* Get the byte address of the real memory for a bitband access. */ -static inline uint32_t bitband_addr(void * opaque, uint32_t addr) +static inline hwaddr bitband_addr(BitBandState *s, hwaddr offset) { - uint32_t res; - - res = *(uint32_t *)opaque; - res |= (addr & 0x1ffffff) >> 5; - return res; - -} - -static uint32_t bitband_readb(void *opaque, hwaddr offset) -{ - uint8_t v; - cpu_physical_memory_read(bitband_addr(opaque, offset), &v, 1); - return (v & (1 << ((offset >> 2) & 7))) != 0; -} - -static void bitband_writeb(void *opaque, hwaddr offset, - uint32_t value) -{ - uint32_t addr; - uint8_t mask; - uint8_t v; - addr = bitband_addr(opaque, offset); - mask = (1 << ((offset >> 2) & 7)); - cpu_physical_memory_read(addr, &v, 1); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 1); -} - -static uint32_t bitband_readw(void *opaque, hwaddr offset) -{ - uint32_t addr; - uint16_t mask; - uint16_t v; - addr = bitband_addr(opaque, offset) & ~1; - mask = (1 << ((offset >> 2) & 15)); - mask = tswap16(mask); - cpu_physical_memory_read(addr, &v, 2); - return (v & mask) != 0; -} - -static void bitband_writew(void *opaque, hwaddr offset, - uint32_t value) -{ - uint32_t addr; - uint16_t mask; - uint16_t v; - addr = bitband_addr(opaque, offset) & ~1; - mask = (1 << ((offset >> 2) & 15)); - mask = tswap16(mask); - cpu_physical_memory_read(addr, &v, 2); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 2); + return s->base | (offset & 0x1ffffff) >> 5; } -static uint32_t bitband_readl(void *opaque, hwaddr offset) +static MemTxResult bitband_read(void *opaque, hwaddr offset, + uint64_t *data, unsigned size, MemTxAttrs attrs) { - uint32_t addr; - uint32_t mask; - uint32_t v; - addr = bitband_addr(opaque, offset) & ~3; - mask = (1 << ((offset >> 2) & 31)); - mask = tswap32(mask); - cpu_physical_memory_read(addr, &v, 4); - return (v & mask) != 0; + BitBandState *s = opaque; + uint8_t buf[4]; + MemTxResult res; + int bitpos, bit; + hwaddr addr; + + assert(size <= 4); + + /* Find address in underlying memory and round down to multiple of size */ + addr = bitband_addr(s, offset) & (-size); + res = address_space_read(s->source_as, addr, attrs, buf, size); + if (res) { + return res; + } + /* Bit position in the N bytes read... */ + bitpos = (offset >> 2) & ((size * 8) - 1); + /* ...converted to byte in buffer and bit in byte */ + bit = (buf[bitpos >> 3] >> (bitpos & 7)) & 1; + *data = bit; + return MEMTX_OK; } -static void bitband_writel(void *opaque, hwaddr offset, - uint32_t value) +static MemTxResult bitband_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size, MemTxAttrs attrs) { - uint32_t addr; - uint32_t mask; - uint32_t v; - addr = bitband_addr(opaque, offset) & ~3; - mask = (1 << ((offset >> 2) & 31)); - mask = tswap32(mask); - cpu_physical_memory_read(addr, &v, 4); - if (value & 1) - v |= mask; - else - v &= ~mask; - cpu_physical_memory_write(addr, &v, 4); + BitBandState *s = opaque; + uint8_t buf[4]; + MemTxResult res; + int bitpos, bit; + hwaddr addr; + + assert(size <= 4); + + /* Find address in underlying memory and round down to multiple of size */ + addr = bitband_addr(s, offset) & (-size); + res = address_space_read(s->source_as, addr, attrs, buf, size); + if (res) { + return res; + } + /* Bit position in the N bytes read... */ + bitpos = (offset >> 2) & ((size * 8) - 1); + /* ...converted to byte in buffer and bit in byte */ + bit = 1 << (bitpos & 7); + if (value & 1) { + buf[bitpos >> 3] |= bit; + } else { + buf[bitpos >> 3] &= ~bit; + } + return address_space_write(s->source_as, addr, attrs, buf, size); } static const MemoryRegionOps bitband_ops = { - .old_mmio = { - .read = { bitband_readb, bitband_readw, bitband_readl, }, - .write = { bitband_writeb, bitband_writew, bitband_writel, }, - }, + .read_with_attrs = bitband_read, + .write_with_attrs = bitband_write, .endianness = DEVICE_NATIVE_ENDIAN, + .impl.min_access_size = 1, + .impl.max_access_size = 4, + .valid.min_access_size = 1, + .valid.max_access_size = 4, }; static void bitband_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void bitband_init(Object *obj) BitBandState *s = BITBAND(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); - memory_region_init_io(&s->iomem, obj, &bitband_ops, &s->base, + object_property_add_link(obj, "source-memory", + TYPE_MEMORY_REGION, + (Object **)&s->source_memory, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + memory_region_init_io(&s->iomem, obj, &bitband_ops, s, "bitband", 0x02000000); sysbus_init_mmio(dev, &s->iomem); } +static void bitband_realize(DeviceState *dev, Error **errp) +{ + BitBandState *s = BITBAND(dev); + + if (!s->source_memory) { + error_setg(errp, "source-memory property not set"); + return; + } + + s->source_as = address_space_init_shareable(s->source_memory, + "bitband-source"); +} + /* Board init. */ static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = { @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } + object_property_set_link(obj, OBJECT(s->board_memory), + "source-memory", &error_abort); object_property_set_bool(obj, true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void bitband_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = bitband_realize; dc->props = bitband_properties; } -- 2.7.4 The NVIC is a core v7M device that exists for all v7M CPUs; put it under a CONFIG_ARM_V7M rather than hiding it under CONFIG_STELLARIS. (We'll use CONFIG_ARM_V7M for the SysTick device too when we split it out of the NVIC.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org --- hw/intc/Makefile.objs | 2 +- default-configs/arm-softmmu.mak | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Makefile.objs +++ b/hw/intc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_APIC) += apic.o apic_common.o obj-$(CONFIG_ARM_GIC_KVM) += arm_gic_kvm.o obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_kvm.o obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_its_kvm.o -obj-$(CONFIG_STELLARIS) += armv7m_nvic.o +obj-$(CONFIG_ARM_V7M) += armv7m_nvic.o obj-$(CONFIG_EXYNOS4) += exynos4210_gic.o exynos4210_combiner.o obj-$(CONFIG_GRLIB) += grlib_irqmp.o obj-$(CONFIG_IOAPIC) += ioapic.o diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ARM11MPCORE=y CONFIG_A9MPCORE=y CONFIG_A15MPCORE=y +CONFIG_ARM_V7M=y + CONFIG_ARM_GIC=y CONFIG_ARM_GIC_KVM=$(CONFIG_KVM) CONFIG_ARM_TIMER=y -- 2.7.4 The SysTick timer isn't really part of the NVIC proper; we just modelled it that way back when we couldn't easily have devices that only occupied a small chunk of a memory region. Split it out into its own device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1487604965-23220-10-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/arm/armv7m_nvic.h | 10 +- include/hw/timer/armv7m_systick.h | 34 ++++++ hw/intc/armv7m_nvic.c | 160 ++++++------------------- hw/timer/armv7m_systick.c | 240 ++++++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 6 + 6 files changed, 318 insertions(+), 133 deletions(-) create mode 100644 include/hw/timer/armv7m_systick.h create mode 100644 hw/timer/armv7m_systick.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_ARM_TIMER) += arm_timer.o common-obj-$(CONFIG_ARM_MPTIMER) += arm_mptimer.o +common-obj-$(CONFIG_ARM_V7M) += armv7m_systick.o common-obj-$(CONFIG_A9_GTIMER) += a9gtimer.o common-obj-$(CONFIG_CADENCE) += cadence_ttc.o common-obj-$(CONFIG_DS1338) += ds1338.o diff --git a/include/hw/arm/armv7m_nvic.h b/include/hw/arm/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m_nvic.h +++ b/include/hw/arm/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "target/arm/cpu.h" #include "hw/sysbus.h" +#include "hw/timer/armv7m_systick.h" #define TYPE_NVIC "armv7m_nvic" @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { unsigned int vectpending; /* highest prio pending enabled exception */ int exception_prio; /* group prio of the highest prio active exception */ - struct { - uint32_t control; - uint32_t reload; - int64_t tick; - QEMUTimer *timer; - } systick; - MemoryRegion sysregmem; MemoryRegion container; uint32_t num_irq; qemu_irq excpout; qemu_irq sysresetreq; + + SysTickState systick; } NVICState; #endif diff --git a/include/hw/timer/armv7m_systick.h b/include/hw/timer/armv7m_systick.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/armv7m_systick.h @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M SysTick timer + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell + * + * This code is licensed under the GPL (version 2 or later). + */ + +#ifndef HW_TIMER_ARMV7M_SYSTICK_H +#define HW_TIMER_ARMV7M_SYSTICK_H + +#include "hw/sysbus.h" + +#define TYPE_SYSTICK "armv7m_systick" + +#define SYSTICK(obj) OBJECT_CHECK(SysTickState, (obj), TYPE_SYSTICK) + +typedef struct SysTickState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + uint32_t control; + uint32_t reload; + int64_t tick; + QEMUTimer *timer; + MemoryRegion iomem; + qemu_irq irq; +} SysTickState; + +#endif diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 }; -/* qemu timers run at 1GHz. We want something closer to 1MHz. */ -#define SYSTICK_SCALE 1000ULL - -#define SYSTICK_ENABLE (1 << 0) -#define SYSTICK_TICKINT (1 << 1) -#define SYSTICK_CLKSOURCE (1 << 2) -#define SYSTICK_COUNTFLAG (1 << 16) - -int system_clock_scale; - -/* Conversion factor from qemu timer to SysTick frequencies. */ -static inline int64_t systick_scale(NVICState *s) -{ - if (s->systick.control & SYSTICK_CLKSOURCE) - return system_clock_scale; - else - return 1000; -} - -static void systick_reload(NVICState *s, int reset) -{ - /* The Cortex-M3 Devices Generic User Guide says that "When the - * ENABLE bit is set to 1, the counter loads the RELOAD value from the - * SYST RVR register and then counts down". So, we need to check the - * ENABLE bit before reloading the value. - */ - if ((s->systick.control & SYSTICK_ENABLE) == 0) { - return; - } - - if (reset) - s->systick.tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - s->systick.tick += (s->systick.reload + 1) * systick_scale(s); - timer_mod(s->systick.timer, s->systick.tick); -} - -static void systick_timer_tick(void * opaque) -{ - NVICState *s = (NVICState *)opaque; - s->systick.control |= SYSTICK_COUNTFLAG; - if (s->systick.control & SYSTICK_TICKINT) { - /* Trigger the interrupt. */ - armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); - } - if (s->systick.reload == 0) { - s->systick.control &= ~SYSTICK_ENABLE; - } else { - systick_reload(s, 0); - } -} - -static void systick_reset(NVICState *s) -{ - s->systick.control = 0; - s->systick.reload = 0; - s->systick.tick = 0; - timer_del(s->systick.timer); -} - static int nvic_pending_prio(NVICState *s) { /* return the priority of the current pending interrupt, @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) switch (offset) { case 4: /* Interrupt Control Type. */ return ((s->num_irq - NVIC_FIRST_IRQ) / 32) - 1; - case 0x10: /* SysTick Control and Status. */ - val = s->systick.control; - s->systick.control &= ~SYSTICK_COUNTFLAG; - return val; - case 0x14: /* SysTick Reload Value. */ - return s->systick.reload; - case 0x18: /* SysTick Current Value. */ - { - int64_t t; - if ((s->systick.control & SYSTICK_ENABLE) == 0) - return 0; - t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (t >= s->systick.tick) - return 0; - val = ((s->systick.tick - (t + 1)) / systick_scale(s)) + 1; - /* The interrupt in triggered when the timer reaches zero. - However the counter is not reloaded until the next clock - tick. This is a hack to return zero during the first tick. */ - if (val > s->systick.reload) - val = 0; - return val; - } - case 0x1c: /* SysTick Calibration Value. */ - return 10000; case 0xd00: /* CPUID Base. */ return cpu->midr; case 0xd04: /* Interrupt Control State. */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset) static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value) { ARMCPU *cpu = s->cpu; - uint32_t oldval; + switch (offset) { - case 0x10: /* SysTick Control and Status. */ - oldval = s->systick.control; - s->systick.control &= 0xfffffff8; - s->systick.control |= value & 7; - if ((oldval ^ value) & SYSTICK_ENABLE) { - int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (value & SYSTICK_ENABLE) { - if (s->systick.tick) { - s->systick.tick += now; - timer_mod(s->systick.timer, s->systick.tick); - } else { - systick_reload(s, 1); - } - } else { - timer_del(s->systick.timer); - s->systick.tick -= now; - if (s->systick.tick < 0) - s->systick.tick = 0; - } - } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { - /* This is a hack. Force the timer to be reloaded - when the reference clock is changed. */ - systick_reload(s, 1); - } - break; - case 0x14: /* SysTick Reload Value. */ - s->systick.reload = value; - break; - case 0x18: /* SysTick Current Value. Writes reload the timer. */ - systick_reload(s, 1); - s->systick.control &= ~SYSTICK_COUNTFLAG; - break; case 0xd04: /* Interrupt Control State. */ if (value & (1 << 31)) { armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_VecInfo = { static const VMStateDescription vmstate_nvic = { .name = "armv7m_nvic", - .version_id = 3, - .minimum_version_id = 3, + .version_id = 4, + .minimum_version_id = 4, .post_load = &nvic_post_load, .fields = (VMStateField[]) { VMSTATE_STRUCT_ARRAY(vectors, NVICState, NVIC_MAX_VECTORS, 1, vmstate_VecInfo, VecInfo), - VMSTATE_UINT32(systick.control, NVICState), - VMSTATE_UINT32(systick.reload, NVICState), - VMSTATE_INT64(systick.tick, NVICState), - VMSTATE_TIMER_PTR(systick.timer, NVICState), VMSTATE_UINT32(prigroup, NVICState), VMSTATE_END_OF_LIST() } @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->exception_prio = NVIC_NOEXC_PRIO; s->vectpending = 0; +} - systick_reset(s); +static void nvic_systick_trigger(void *opaque, int n, int level) +{ + NVICState *s = opaque; + + if (level) { + /* SysTick just asked us to pend its exception. + * (This is different from an external interrupt line's + * behaviour.) + */ + armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); + } } static void armv7m_nvic_realize(DeviceState *dev, Error **errp) { NVICState *s = NVIC(dev); + SysBusDevice *systick_sbd; + Error *err = NULL; s->cpu = ARM_CPU(qemu_get_cpu(0)); assert(s->cpu); @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) /* include space for internal exception vectors */ s->num_irq += NVIC_FIRST_IRQ; + object_property_set_bool(OBJECT(&s->systick), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + systick_sbd = SYS_BUS_DEVICE(&s->systick); + sysbus_connect_irq(systick_sbd, 0, + qdev_get_gpio_in_named(dev, "systick-trigger", 0)); + /* The NVIC and System Control Space (SCS) starts at 0xe000e000 * and looks like this: * 0x004 - ICTR - * 0x010 - 0x1c - systick + * 0x010 - 0xff - systick * 0x100..0x7ec - NVIC * 0x7f0..0xcff - Reserved * 0xd00..0xd3c - SCS registers @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_realize(DeviceState *dev, Error **errp) memory_region_init_io(&s->sysregmem, OBJECT(s), &nvic_sysreg_ops, s, "nvic_sysregs", 0x1000); memory_region_add_subregion(&s->container, 0, &s->sysregmem); + memory_region_add_subregion_overlap(&s->container, 0x10, + sysbus_mmio_get_region(systick_sbd, 0), + 1); sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container); - - s->systick.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); } static void armv7m_nvic_instance_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_instance_init(Object *obj) NVICState *nvic = NVIC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + object_initialize(&nvic->systick, sizeof(nvic->systick), TYPE_SYSTICK); + qdev_set_parent_bus(DEVICE(&nvic->systick), sysbus_get_default()); + sysbus_init_irq(sbd, &nvic->excpout); qdev_init_gpio_out_named(dev, &nvic->sysresetreq, "SYSRESETREQ", 1); + qdev_init_gpio_in_named(dev, nvic_systick_trigger, "systick-trigger", 1); } static void armv7m_nvic_class_init(ObjectClass *klass, void *data) diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/armv7m_systick.c @@ -XXX,XX +XXX,XX @@ +/* + * ARMv7M SysTick timer + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * Copyright (c) 2017 Linaro Ltd + * Written by Peter Maydell + * + * This code is licensed under the GPL (version 2 or later). + */ + +#include "qemu/osdep.h" +#include "hw/timer/armv7m_systick.h" +#include "qemu-common.h" +#include "hw/sysbus.h" +#include "qemu/timer.h" +#include "qemu/log.h" +#include "trace.h" + +/* qemu timers run at 1GHz. We want something closer to 1MHz. */ +#define SYSTICK_SCALE 1000ULL + +#define SYSTICK_ENABLE (1 << 0) +#define SYSTICK_TICKINT (1 << 1) +#define SYSTICK_CLKSOURCE (1 << 2) +#define SYSTICK_COUNTFLAG (1 << 16) + +int system_clock_scale; + +/* Conversion factor from qemu timer to SysTick frequencies. */ +static inline int64_t systick_scale(SysTickState *s) +{ + if (s->control & SYSTICK_CLKSOURCE) { + return system_clock_scale; + } else { + return 1000; + } +} + +static void systick_reload(SysTickState *s, int reset) +{ + /* The Cortex-M3 Devices Generic User Guide says that "When the + * ENABLE bit is set to 1, the counter loads the RELOAD value from the + * SYST RVR register and then counts down". So, we need to check the + * ENABLE bit before reloading the value. + */ + trace_systick_reload(); + + if ((s->control & SYSTICK_ENABLE) == 0) { + return; + } + + if (reset) { + s->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + } + s->tick += (s->reload + 1) * systick_scale(s); + timer_mod(s->timer, s->tick); +} + +static void systick_timer_tick(void *opaque) +{ + SysTickState *s = (SysTickState *)opaque; + + trace_systick_timer_tick(); + + s->control |= SYSTICK_COUNTFLAG; + if (s->control & SYSTICK_TICKINT) { + /* Tell the NVIC to pend the SysTick exception */ + qemu_irq_pulse(s->irq); + } + if (s->reload == 0) { + s->control &= ~SYSTICK_ENABLE; + } else { + systick_reload(s, 0); + } +} + +static uint64_t systick_read(void *opaque, hwaddr addr, unsigned size) +{ + SysTickState *s = opaque; + uint32_t val; + + switch (addr) { + case 0x0: /* SysTick Control and Status. */ + val = s->control; + s->control &= ~SYSTICK_COUNTFLAG; + break; + case 0x4: /* SysTick Reload Value. */ + val = s->reload; + break; + case 0x8: /* SysTick Current Value. */ + { + int64_t t; + + if ((s->control & SYSTICK_ENABLE) == 0) { + val = 0; + break; + } + t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + if (t >= s->tick) { + val = 0; + break; + } + val = ((s->tick - (t + 1)) / systick_scale(s)) + 1; + /* The interrupt in triggered when the timer reaches zero. + However the counter is not reloaded until the next clock + tick. This is a hack to return zero during the first tick. */ + if (val > s->reload) { + val = 0; + } + break; + } + case 0xc: /* SysTick Calibration Value. */ + val = 10000; + break; + default: + val = 0; + qemu_log_mask(LOG_GUEST_ERROR, + "SysTick: Bad read offset 0x%" HWADDR_PRIx "\n", addr); + break; + } + + trace_systick_read(addr, val, size); + return val; +} + +static void systick_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + SysTickState *s = opaque; + + trace_systick_write(addr, value, size); + + switch (addr) { + case 0x0: /* SysTick Control and Status. */ + { + uint32_t oldval = s->control; + + s->control &= 0xfffffff8; + s->control |= value & 7; + if ((oldval ^ value) & SYSTICK_ENABLE) { + int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + if (value & SYSTICK_ENABLE) { + if (s->tick) { + s->tick += now; + timer_mod(s->timer, s->tick); + } else { + systick_reload(s, 1); + } + } else { + timer_del(s->timer); + s->tick -= now; + if (s->tick < 0) { + s->tick = 0; + } + } + } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { + /* This is a hack. Force the timer to be reloaded + when the reference clock is changed. */ + systick_reload(s, 1); + } + break; + } + case 0x4: /* SysTick Reload Value. */ + s->reload = value; + break; + case 0x8: /* SysTick Current Value. Writes reload the timer. */ + systick_reload(s, 1); + s->control &= ~SYSTICK_COUNTFLAG; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "SysTick: Bad write offset 0x%" HWADDR_PRIx "\n", addr); + } +} + +static const MemoryRegionOps systick_ops = { + .read = systick_read, + .write = systick_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static void systick_reset(DeviceState *dev) +{ + SysTickState *s = SYSTICK(dev); + + s->control = 0; + s->reload = 0; + s->tick = 0; + timer_del(s->timer); +} + +static void systick_instance_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + SysTickState *s = SYSTICK(obj); + + memory_region_init_io(&s->iomem, obj, &systick_ops, s, "systick", 0xe0); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); + s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); +} + +static const VMStateDescription vmstate_systick = { + .name = "armv7m_systick", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(control, SysTickState), + VMSTATE_UINT32(reload, SysTickState), + VMSTATE_INT64(tick, SysTickState), + VMSTATE_TIMER_PTR(timer, SysTickState), + VMSTATE_END_OF_LIST() + } +}; + +static void systick_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_systick; + dc->reset = systick_reset; +} + +static const TypeInfo armv7m_systick_info = { + .name = TYPE_SYSTICK, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = systick_instance_init, + .instance_size = sizeof(SysTickState), + .class_init = systick_class_init, +}; + +static void armv7m_systick_register_types(void) +{ + type_register_static(&armv7m_systick_info); +} + +type_init(armv7m_systick_register_types) diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ aspeed_timer_ctrl_pulse_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" aspeed_timer_set_ctrl2(uint32_t value) "Value: 0x%" PRIx32 aspeed_timer_set_value(int timer, int reg, uint32_t value) "Timer %d register %d: 0x%" PRIx32 aspeed_timer_read(uint64_t offset, unsigned size, uint64_t value) "From 0x%" PRIx64 ": of size %u: 0x%" PRIx64 + +# hw/timer/armv7m_systick.c +systick_reload(void) "systick reload" +systick_timer_tick(void) "systick reload" +systick_read(uint64_t addr, uint32_t value, unsigned size) "systick read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" +systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" -- 2.7.4 Switch the stm32f205 SoC to create the armv7m object directly rather than via the armv7m_init() wrapper. This fits better with the SoC model's very QOMified design. In particular this means we can push loading the guest image out to the top level board code where it belongs, rather than the SoC object having a QOM property for the filename to load. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-11-git-send-email-peter.maydell@linaro.org --- include/hw/arm/stm32f205_soc.h | 4 +++- hw/arm/netduino2.c | 7 ++++--- hw/arm/stm32f205_soc.c | 16 +++++++++++++--- 3 files changed, 20 insertions(+), 7 deletions(-) diff --git a/include/hw/arm/stm32f205_soc.h b/include/hw/arm/stm32f205_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32f205_soc.h +++ b/include/hw/arm/stm32f205_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/adc/stm32f2xx_adc.h" #include "hw/or-irq.h" #include "hw/ssi/stm32f2xx_spi.h" +#include "hw/arm/armv7m.h" #define TYPE_STM32F205_SOC "stm32f205-soc" #define STM32F205_SOC(obj) \ @@ -XXX,XX +XXX,XX @@ typedef struct STM32F205State { SysBusDevice parent_obj; /*< public >*/ - char *kernel_filename; char *cpu_model; + ARMv7MState armv7m; + STM32F2XXSyscfgState syscfg; STM32F2XXUsartState usart[STM_NUM_USARTS]; STM32F2XXTimerState timer[STM_NUM_TIMERS]; diff --git a/hw/arm/netduino2.c b/hw/arm/netduino2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/netduino2.c +++ b/hw/arm/netduino2.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "qemu/error-report.h" #include "hw/arm/stm32f205_soc.h" +#include "hw/arm/arm.h" static void netduino2_init(MachineState *machine) { DeviceState *dev; dev = qdev_create(NULL, TYPE_STM32F205_SOC); - if (machine->kernel_filename) { - qdev_prop_set_string(dev, "kernel-filename", machine->kernel_filename); - } qdev_prop_set_string(dev, "cpu-model", "cortex-m3"); object_property_set_bool(OBJECT(dev), true, "realized", &error_fatal); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, + FLASH_SIZE); } static void netduino2_machine_init(MachineClass *mc) diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_initfn(Object *obj) STM32F205State *s = STM32F205_SOC(obj); int i; + object_initialize(&s->armv7m, sizeof(s->armv7m), TYPE_ARMV7M); + qdev_set_parent_bus(DEVICE(&s->armv7m), sysbus_get_default()); + object_initialize(&s->syscfg, sizeof(s->syscfg), TYPE_STM32F2XX_SYSCFG); qdev_set_parent_bus(DEVICE(&s->syscfg), sysbus_get_default()); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) vmstate_register_ram_global(sram); memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); - nvic = armv7m_init(get_system_memory(), FLASH_SIZE, 96, - s->kernel_filename, s->cpu_model); + nvic = DEVICE(&s->armv7m); + qdev_prop_set_uint32(nvic, "num-irq", 96); + qdev_prop_set_string(nvic, "cpu-model", s->cpu_model); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), + "memory", &error_abort); + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } /* System configuration controller */ dev = DEVICE(&s->syscfg); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } static Property stm32f205_soc_properties[] = { - DEFINE_PROP_STRING("kernel-filename", STM32F205State, kernel_filename), DEFINE_PROP_STRING("cpu-model", STM32F205State, cpu_model), DEFINE_PROP_END_OF_LIST(), }; -- 2.7.4 The local variable 'nvic' in stm32f205_soc_realize() no longer holds a direct pointer to the NVIC device; it is a pointer to the ARMv7M container object. Rename it 'armv7m' accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-12-git-send-email-peter.maydell@linaro.org --- hw/arm/stm32f205_soc.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_initfn(Object *obj) static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) { STM32F205State *s = STM32F205_SOC(dev_soc); - DeviceState *dev, *nvic; + DeviceState *dev, *armv7m; SysBusDevice *busdev; Error *err = NULL; int i; @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) vmstate_register_ram_global(sram); memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); - nvic = DEVICE(&s->armv7m); - qdev_prop_set_uint32(nvic, "num-irq", 96); - qdev_prop_set_string(nvic, "cpu-model", s->cpu_model); + armv7m = DEVICE(&s->armv7m); + qdev_prop_set_uint32(armv7m, "num-irq", 96); + qdev_prop_set_string(armv7m, "cpu-model", s->cpu_model); object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), "memory", &error_abort); object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, 0x40013800); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, 71)); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, 71)); /* Attach UART (uses USART registers) and USART controllers */ for (i = 0; i < STM_NUM_USARTS; i++) { @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, usart_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, usart_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, usart_irq[i])); } /* Timer 2 to 5 */ @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, timer_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, timer_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, timer_irq[i])); } /* ADC 1 to 3 */ @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) return; } qdev_connect_gpio_out(DEVICE(s->adc_irqs), 0, - qdev_get_gpio_in(nvic, ADC_IRQ)); + qdev_get_gpio_in(armv7m, ADC_IRQ)); for (i = 0; i < STM_NUM_ADCS; i++) { dev = DEVICE(&(s->adc[i])); @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) } busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, spi_addr[i]); - sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, spi_irq[i])); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, spi_irq[i])); } } -- 2.7.4 From: Paolo Bonzini <pbonzini@redhat.com> The linux-headers/asm-arm/unistd.h file has been split in three sub-files, copy them along. However, building them requires setting ARCH rather than SRCARCH. SRCARCH defaults to $(ARCH) anyway; to avoid future occurrence of the same problem use ARCH for all architectures where SRCARCH=ARCH. Currently these are all except x86, sparc, sh and tile. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20170221122920.16245-2-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- scripts/update-linux-headers.sh | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh index XXXXXXX..XXXXXXX 100755 --- a/scripts/update-linux-headers.sh +++ b/scripts/update-linux-headers.sh @@ -XXX,XX +XXX,XX @@ for arch in $ARCHLIST; do continue fi - make -C "$linux" INSTALL_HDR_PATH="$tmpdir" SRCARCH=$arch headers_install + if [ "$arch" = x86 ]; then + arch_var=SRCARCH + else + arch_var=ARCH + fi + + make -C "$linux" INSTALL_HDR_PATH="$tmpdir" $arch_var=$arch headers_install rm -rf "$output/linux-headers/asm-$arch" mkdir -p "$output/linux-headers/asm-$arch" @@ -XXX,XX +XXX,XX @@ for arch in $ARCHLIST; do cp_portable "$tmpdir/include/asm/kvm_virtio.h" "$output/include/standard-headers/asm-s390/" cp_portable "$tmpdir/include/asm/virtio-ccw.h" "$output/include/standard-headers/asm-s390/" fi + if [ $arch = arm ]; then + cp "$tmpdir/include/asm/unistd-eabi.h" "$output/linux-headers/asm-arm/" + cp "$tmpdir/include/asm/unistd-oabi.h" "$output/linux-headers/asm-arm/" + cp "$tmpdir/include/asm/unistd-common.h" "$output/linux-headers/asm-arm/" + fi if [ $arch = x86 ]; then cp_portable "$tmpdir/include/asm/hyperv.h" "$output/include/standard-headers/asm-x86/" cp "$tmpdir/include/asm/unistd_32.h" "$output/linux-headers/asm-x86/" -- 2.7.4 From: Paolo Bonzini <pbonzini@redhat.com> virtio_mmio.h would be deleted; I am leaving it in though it was a mistake to add it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/standard-headers/asm-x86/hyperv.h | 8 + include/standard-headers/linux/input-event-codes.h | 2 +- include/standard-headers/linux/pci_regs.h | 25 ++ include/standard-headers/linux/virtio_ids.h | 1 + linux-headers/asm-arm/kvm.h | 15 + linux-headers/asm-arm/unistd-common.h | 357 ++++++++++++++++++ linux-headers/asm-arm/unistd-eabi.h | 5 + linux-headers/asm-arm/unistd-oabi.h | 17 + linux-headers/asm-arm/unistd.h | 419 +-------------------- linux-headers/asm-arm64/kvm.h | 13 + linux-headers/asm-powerpc/kvm.h | 27 ++ linux-headers/asm-powerpc/unistd.h | 1 + linux-headers/asm-x86/kvm_para.h | 13 +- linux-headers/linux/kvm.h | 24 +- linux-headers/linux/kvm_para.h | 2 + linux-headers/linux/userfaultfd.h | 67 +++- linux-headers/linux/vfio.h | 10 + 17 files changed, 577 insertions(+), 429 deletions(-) create mode 100644 linux-headers/asm-arm/unistd-common.h create mode 100644 linux-headers/asm-arm/unistd-eabi.h create mode 100644 linux-headers/asm-arm/unistd-oabi.h diff --git a/include/standard-headers/asm-x86/hyperv.h b/include/standard-headers/asm-x86/hyperv.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/asm-x86/hyperv.h +++ b/include/standard-headers/asm-x86/hyperv.h @@ -XXX,XX +XXX,XX @@ */ #define HV_X64_MSR_STAT_PAGES_AVAILABLE (1 << 8) +/* Crash MSR available */ +#define HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE (1 << 10) + /* * Feature identification: EBX indicates which flags were specified at * partition creation. The format is the same as the partition creation @@ -XXX,XX +XXX,XX @@ */ #define HV_X64_RELAXED_TIMING_RECOMMENDED (1 << 5) +/* + * Crash notification flag. + */ +#define HV_CRASH_CTL_CRASH_NOTIFY (1ULL << 63) + /* MSR used to identify the guest OS. */ #define HV_X64_MSR_GUEST_OS_ID 0x40000000 diff --git a/include/standard-headers/linux/input-event-codes.h b/include/standard-headers/linux/input-event-codes.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/input-event-codes.h +++ b/include/standard-headers/linux/input-event-codes.h @@ -XXX,XX +XXX,XX @@ * Control a data application associated with the currently viewed channel, * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.) */ -#define KEY_DATA 0x275 +#define KEY_DATA 0x277 #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -XXX,XX +XXX,XX @@ #define LINUX_PCI_REGS_H /* + * Conventional PCI and PCI-X Mode 1 devices have 256 bytes of + * configuration space. PCI-X Mode 2 and PCIe devices have 4096 bytes of + * configuration space. + */ +#define PCI_CFG_SPACE_SIZE 256 +#define PCI_CFG_SPACE_EXP_SIZE 4096 + +/* * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */ @@ -XXX,XX +XXX,XX @@ #define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ #define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ #define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */ +#define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */ #define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */ #define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PTM @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_DPC_STATUS 8 /* DPC Status */ #define PCI_EXP_DPC_STATUS_TRIGGER 0x01 /* Trigger Status */ #define PCI_EXP_DPC_STATUS_INTERRUPT 0x08 /* Interrupt Status */ +#define PCI_EXP_DPC_RP_BUSY 0x10 /* Root Port Busy */ #define PCI_EXP_DPC_SOURCE_ID 10 /* DPC Source Identifier */ @@ -XXX,XX +XXX,XX @@ #define PCI_PTM_CTRL_ENABLE 0x00000001 /* PTM enable */ #define PCI_PTM_CTRL_ROOT 0x00000002 /* Root select */ +/* L1 PM Substates */ +#define PCI_L1SS_CAP 4 /* capability register */ +#define PCI_L1SS_CAP_PCIPM_L1_2 1 /* PCI PM L1.2 Support */ +#define PCI_L1SS_CAP_PCIPM_L1_1 2 /* PCI PM L1.1 Support */ +#define PCI_L1SS_CAP_ASPM_L1_2 4 /* ASPM L1.2 Support */ +#define PCI_L1SS_CAP_ASPM_L1_1 8 /* ASPM L1.1 Support */ +#define PCI_L1SS_CAP_L1_PM_SS 16 /* L1 PM Substates Support */ +#define PCI_L1SS_CTL1 8 /* Control Register 1 */ +#define PCI_L1SS_CTL1_PCIPM_L1_2 1 /* PCI PM L1.2 Enable */ +#define PCI_L1SS_CTL1_PCIPM_L1_1 2 /* PCI PM L1.1 Support */ +#define PCI_L1SS_CTL1_ASPM_L1_2 4 /* ASPM L1.2 Support */ +#define PCI_L1SS_CTL1_ASPM_L1_1 8 /* ASPM L1.1 Support */ +#define PCI_L1SS_CTL1_L1SS_MASK 0x0000000F +#define PCI_L1SS_CTL2 0xC /* Control Register 2 */ + #endif /* LINUX_PCI_REGS_H */ diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/virtio_ids.h +++ b/include/standard-headers/linux/virtio_ids.h @@ -XXX,XX +XXX,XX @@ #define VIRTIO_ID_INPUT 18 /* virtio input */ #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ #define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ + #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/linux-headers/asm-arm/kvm.h b/linux-headers/asm-arm/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm/kvm.h +++ b/linux-headers/asm-arm/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_regs { /* Supported VGICv3 address types */ #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 +#define KVM_VGIC_ITS_ADDR_TYPE 4 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) +#define KVM_VGIC_V3_ITS_SIZE (2 * SZ_64K) #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ #define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */ @@ -XXX,XX +XXX,XX @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 #define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 +#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ + (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) #define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 #define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 +#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 +#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ + (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff +#define VGIC_LEVEL_INFO_LINE_LEVEL 0 + #define KVM_DEV_ARM_VGIC_CTRL_INIT 0 /* KVM_IRQ_LINE irq field index values */ diff --git a/linux-headers/asm-arm/unistd-common.h b/linux-headers/asm-arm/unistd-common.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-common.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_COMMON_H +#define _ASM_ARM_UNISTD_COMMON_H 1 + +#define __NR_restart_syscall (__NR_SYSCALL_BASE + 0) +#define __NR_exit (__NR_SYSCALL_BASE + 1) +#define __NR_fork (__NR_SYSCALL_BASE + 2) +#define __NR_read (__NR_SYSCALL_BASE + 3) +#define __NR_write (__NR_SYSCALL_BASE + 4) +#define __NR_open (__NR_SYSCALL_BASE + 5) +#define __NR_close (__NR_SYSCALL_BASE + 6) +#define __NR_creat (__NR_SYSCALL_BASE + 8) +#define __NR_link (__NR_SYSCALL_BASE + 9) +#define __NR_unlink (__NR_SYSCALL_BASE + 10) +#define __NR_execve (__NR_SYSCALL_BASE + 11) +#define __NR_chdir (__NR_SYSCALL_BASE + 12) +#define __NR_mknod (__NR_SYSCALL_BASE + 14) +#define __NR_chmod (__NR_SYSCALL_BASE + 15) +#define __NR_lchown (__NR_SYSCALL_BASE + 16) +#define __NR_lseek (__NR_SYSCALL_BASE + 19) +#define __NR_getpid (__NR_SYSCALL_BASE + 20) +#define __NR_mount (__NR_SYSCALL_BASE + 21) +#define __NR_setuid (__NR_SYSCALL_BASE + 23) +#define __NR_getuid (__NR_SYSCALL_BASE + 24) +#define __NR_ptrace (__NR_SYSCALL_BASE + 26) +#define __NR_pause (__NR_SYSCALL_BASE + 29) +#define __NR_access (__NR_SYSCALL_BASE + 33) +#define __NR_nice (__NR_SYSCALL_BASE + 34) +#define __NR_sync (__NR_SYSCALL_BASE + 36) +#define __NR_kill (__NR_SYSCALL_BASE + 37) +#define __NR_rename (__NR_SYSCALL_BASE + 38) +#define __NR_mkdir (__NR_SYSCALL_BASE + 39) +#define __NR_rmdir (__NR_SYSCALL_BASE + 40) +#define __NR_dup (__NR_SYSCALL_BASE + 41) +#define __NR_pipe (__NR_SYSCALL_BASE + 42) +#define __NR_times (__NR_SYSCALL_BASE + 43) +#define __NR_brk (__NR_SYSCALL_BASE + 45) +#define __NR_setgid (__NR_SYSCALL_BASE + 46) +#define __NR_getgid (__NR_SYSCALL_BASE + 47) +#define __NR_geteuid (__NR_SYSCALL_BASE + 49) +#define __NR_getegid (__NR_SYSCALL_BASE + 50) +#define __NR_acct (__NR_SYSCALL_BASE + 51) +#define __NR_umount2 (__NR_SYSCALL_BASE + 52) +#define __NR_ioctl (__NR_SYSCALL_BASE + 54) +#define __NR_fcntl (__NR_SYSCALL_BASE + 55) +#define __NR_setpgid (__NR_SYSCALL_BASE + 57) +#define __NR_umask (__NR_SYSCALL_BASE + 60) +#define __NR_chroot (__NR_SYSCALL_BASE + 61) +#define __NR_ustat (__NR_SYSCALL_BASE + 62) +#define __NR_dup2 (__NR_SYSCALL_BASE + 63) +#define __NR_getppid (__NR_SYSCALL_BASE + 64) +#define __NR_getpgrp (__NR_SYSCALL_BASE + 65) +#define __NR_setsid (__NR_SYSCALL_BASE + 66) +#define __NR_sigaction (__NR_SYSCALL_BASE + 67) +#define __NR_setreuid (__NR_SYSCALL_BASE + 70) +#define __NR_setregid (__NR_SYSCALL_BASE + 71) +#define __NR_sigsuspend (__NR_SYSCALL_BASE + 72) +#define __NR_sigpending (__NR_SYSCALL_BASE + 73) +#define __NR_sethostname (__NR_SYSCALL_BASE + 74) +#define __NR_setrlimit (__NR_SYSCALL_BASE + 75) +#define __NR_getrusage (__NR_SYSCALL_BASE + 77) +#define __NR_gettimeofday (__NR_SYSCALL_BASE + 78) +#define __NR_settimeofday (__NR_SYSCALL_BASE + 79) +#define __NR_getgroups (__NR_SYSCALL_BASE + 80) +#define __NR_setgroups (__NR_SYSCALL_BASE + 81) +#define __NR_symlink (__NR_SYSCALL_BASE + 83) +#define __NR_readlink (__NR_SYSCALL_BASE + 85) +#define __NR_uselib (__NR_SYSCALL_BASE + 86) +#define __NR_swapon (__NR_SYSCALL_BASE + 87) +#define __NR_reboot (__NR_SYSCALL_BASE + 88) +#define __NR_munmap (__NR_SYSCALL_BASE + 91) +#define __NR_truncate (__NR_SYSCALL_BASE + 92) +#define __NR_ftruncate (__NR_SYSCALL_BASE + 93) +#define __NR_fchmod (__NR_SYSCALL_BASE + 94) +#define __NR_fchown (__NR_SYSCALL_BASE + 95) +#define __NR_getpriority (__NR_SYSCALL_BASE + 96) +#define __NR_setpriority (__NR_SYSCALL_BASE + 97) +#define __NR_statfs (__NR_SYSCALL_BASE + 99) +#define __NR_fstatfs (__NR_SYSCALL_BASE + 100) +#define __NR_syslog (__NR_SYSCALL_BASE + 103) +#define __NR_setitimer (__NR_SYSCALL_BASE + 104) +#define __NR_getitimer (__NR_SYSCALL_BASE + 105) +#define __NR_stat (__NR_SYSCALL_BASE + 106) +#define __NR_lstat (__NR_SYSCALL_BASE + 107) +#define __NR_fstat (__NR_SYSCALL_BASE + 108) +#define __NR_vhangup (__NR_SYSCALL_BASE + 111) +#define __NR_wait4 (__NR_SYSCALL_BASE + 114) +#define __NR_swapoff (__NR_SYSCALL_BASE + 115) +#define __NR_sysinfo (__NR_SYSCALL_BASE + 116) +#define __NR_fsync (__NR_SYSCALL_BASE + 118) +#define __NR_sigreturn (__NR_SYSCALL_BASE + 119) +#define __NR_clone (__NR_SYSCALL_BASE + 120) +#define __NR_setdomainname (__NR_SYSCALL_BASE + 121) +#define __NR_uname (__NR_SYSCALL_BASE + 122) +#define __NR_adjtimex (__NR_SYSCALL_BASE + 124) +#define __NR_mprotect (__NR_SYSCALL_BASE + 125) +#define __NR_sigprocmask (__NR_SYSCALL_BASE + 126) +#define __NR_init_module (__NR_SYSCALL_BASE + 128) +#define __NR_delete_module (__NR_SYSCALL_BASE + 129) +#define __NR_quotactl (__NR_SYSCALL_BASE + 131) +#define __NR_getpgid (__NR_SYSCALL_BASE + 132) +#define __NR_fchdir (__NR_SYSCALL_BASE + 133) +#define __NR_bdflush (__NR_SYSCALL_BASE + 134) +#define __NR_sysfs (__NR_SYSCALL_BASE + 135) +#define __NR_personality (__NR_SYSCALL_BASE + 136) +#define __NR_setfsuid (__NR_SYSCALL_BASE + 138) +#define __NR_setfsgid (__NR_SYSCALL_BASE + 139) +#define __NR__llseek (__NR_SYSCALL_BASE + 140) +#define __NR_getdents (__NR_SYSCALL_BASE + 141) +#define __NR__newselect (__NR_SYSCALL_BASE + 142) +#define __NR_flock (__NR_SYSCALL_BASE + 143) +#define __NR_msync (__NR_SYSCALL_BASE + 144) +#define __NR_readv (__NR_SYSCALL_BASE + 145) +#define __NR_writev (__NR_SYSCALL_BASE + 146) +#define __NR_getsid (__NR_SYSCALL_BASE + 147) +#define __NR_fdatasync (__NR_SYSCALL_BASE + 148) +#define __NR__sysctl (__NR_SYSCALL_BASE + 149) +#define __NR_mlock (__NR_SYSCALL_BASE + 150) +#define __NR_munlock (__NR_SYSCALL_BASE + 151) +#define __NR_mlockall (__NR_SYSCALL_BASE + 152) +#define __NR_munlockall (__NR_SYSCALL_BASE + 153) +#define __NR_sched_setparam (__NR_SYSCALL_BASE + 154) +#define __NR_sched_getparam (__NR_SYSCALL_BASE + 155) +#define __NR_sched_setscheduler (__NR_SYSCALL_BASE + 156) +#define __NR_sched_getscheduler (__NR_SYSCALL_BASE + 157) +#define __NR_sched_yield (__NR_SYSCALL_BASE + 158) +#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE + 159) +#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE + 160) +#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE + 161) +#define __NR_nanosleep (__NR_SYSCALL_BASE + 162) +#define __NR_mremap (__NR_SYSCALL_BASE + 163) +#define __NR_setresuid (__NR_SYSCALL_BASE + 164) +#define __NR_getresuid (__NR_SYSCALL_BASE + 165) +#define __NR_poll (__NR_SYSCALL_BASE + 168) +#define __NR_nfsservctl (__NR_SYSCALL_BASE + 169) +#define __NR_setresgid (__NR_SYSCALL_BASE + 170) +#define __NR_getresgid (__NR_SYSCALL_BASE + 171) +#define __NR_prctl (__NR_SYSCALL_BASE + 172) +#define __NR_rt_sigreturn (__NR_SYSCALL_BASE + 173) +#define __NR_rt_sigaction (__NR_SYSCALL_BASE + 174) +#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE + 175) +#define __NR_rt_sigpending (__NR_SYSCALL_BASE + 176) +#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE + 177) +#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE + 178) +#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE + 179) +#define __NR_pread64 (__NR_SYSCALL_BASE + 180) +#define __NR_pwrite64 (__NR_SYSCALL_BASE + 181) +#define __NR_chown (__NR_SYSCALL_BASE + 182) +#define __NR_getcwd (__NR_SYSCALL_BASE + 183) +#define __NR_capget (__NR_SYSCALL_BASE + 184) +#define __NR_capset (__NR_SYSCALL_BASE + 185) +#define __NR_sigaltstack (__NR_SYSCALL_BASE + 186) +#define __NR_sendfile (__NR_SYSCALL_BASE + 187) +#define __NR_vfork (__NR_SYSCALL_BASE + 190) +#define __NR_ugetrlimit (__NR_SYSCALL_BASE + 191) +#define __NR_mmap2 (__NR_SYSCALL_BASE + 192) +#define __NR_truncate64 (__NR_SYSCALL_BASE + 193) +#define __NR_ftruncate64 (__NR_SYSCALL_BASE + 194) +#define __NR_stat64 (__NR_SYSCALL_BASE + 195) +#define __NR_lstat64 (__NR_SYSCALL_BASE + 196) +#define __NR_fstat64 (__NR_SYSCALL_BASE + 197) +#define __NR_lchown32 (__NR_SYSCALL_BASE + 198) +#define __NR_getuid32 (__NR_SYSCALL_BASE + 199) +#define __NR_getgid32 (__NR_SYSCALL_BASE + 200) +#define __NR_geteuid32 (__NR_SYSCALL_BASE + 201) +#define __NR_getegid32 (__NR_SYSCALL_BASE + 202) +#define __NR_setreuid32 (__NR_SYSCALL_BASE + 203) +#define __NR_setregid32 (__NR_SYSCALL_BASE + 204) +#define __NR_getgroups32 (__NR_SYSCALL_BASE + 205) +#define __NR_setgroups32 (__NR_SYSCALL_BASE + 206) +#define __NR_fchown32 (__NR_SYSCALL_BASE + 207) +#define __NR_setresuid32 (__NR_SYSCALL_BASE + 208) +#define __NR_getresuid32 (__NR_SYSCALL_BASE + 209) +#define __NR_setresgid32 (__NR_SYSCALL_BASE + 210) +#define __NR_getresgid32 (__NR_SYSCALL_BASE + 211) +#define __NR_chown32 (__NR_SYSCALL_BASE + 212) +#define __NR_setuid32 (__NR_SYSCALL_BASE + 213) +#define __NR_setgid32 (__NR_SYSCALL_BASE + 214) +#define __NR_setfsuid32 (__NR_SYSCALL_BASE + 215) +#define __NR_setfsgid32 (__NR_SYSCALL_BASE + 216) +#define __NR_getdents64 (__NR_SYSCALL_BASE + 217) +#define __NR_pivot_root (__NR_SYSCALL_BASE + 218) +#define __NR_mincore (__NR_SYSCALL_BASE + 219) +#define __NR_madvise (__NR_SYSCALL_BASE + 220) +#define __NR_fcntl64 (__NR_SYSCALL_BASE + 221) +#define __NR_gettid (__NR_SYSCALL_BASE + 224) +#define __NR_readahead (__NR_SYSCALL_BASE + 225) +#define __NR_setxattr (__NR_SYSCALL_BASE + 226) +#define __NR_lsetxattr (__NR_SYSCALL_BASE + 227) +#define __NR_fsetxattr (__NR_SYSCALL_BASE + 228) +#define __NR_getxattr (__NR_SYSCALL_BASE + 229) +#define __NR_lgetxattr (__NR_SYSCALL_BASE + 230) +#define __NR_fgetxattr (__NR_SYSCALL_BASE + 231) +#define __NR_listxattr (__NR_SYSCALL_BASE + 232) +#define __NR_llistxattr (__NR_SYSCALL_BASE + 233) +#define __NR_flistxattr (__NR_SYSCALL_BASE + 234) +#define __NR_removexattr (__NR_SYSCALL_BASE + 235) +#define __NR_lremovexattr (__NR_SYSCALL_BASE + 236) +#define __NR_fremovexattr (__NR_SYSCALL_BASE + 237) +#define __NR_tkill (__NR_SYSCALL_BASE + 238) +#define __NR_sendfile64 (__NR_SYSCALL_BASE + 239) +#define __NR_futex (__NR_SYSCALL_BASE + 240) +#define __NR_sched_setaffinity (__NR_SYSCALL_BASE + 241) +#define __NR_sched_getaffinity (__NR_SYSCALL_BASE + 242) +#define __NR_io_setup (__NR_SYSCALL_BASE + 243) +#define __NR_io_destroy (__NR_SYSCALL_BASE + 244) +#define __NR_io_getevents (__NR_SYSCALL_BASE + 245) +#define __NR_io_submit (__NR_SYSCALL_BASE + 246) +#define __NR_io_cancel (__NR_SYSCALL_BASE + 247) +#define __NR_exit_group (__NR_SYSCALL_BASE + 248) +#define __NR_lookup_dcookie (__NR_SYSCALL_BASE + 249) +#define __NR_epoll_create (__NR_SYSCALL_BASE + 250) +#define __NR_epoll_ctl (__NR_SYSCALL_BASE + 251) +#define __NR_epoll_wait (__NR_SYSCALL_BASE + 252) +#define __NR_remap_file_pages (__NR_SYSCALL_BASE + 253) +#define __NR_set_tid_address (__NR_SYSCALL_BASE + 256) +#define __NR_timer_create (__NR_SYSCALL_BASE + 257) +#define __NR_timer_settime (__NR_SYSCALL_BASE + 258) +#define __NR_timer_gettime (__NR_SYSCALL_BASE + 259) +#define __NR_timer_getoverrun (__NR_SYSCALL_BASE + 260) +#define __NR_timer_delete (__NR_SYSCALL_BASE + 261) +#define __NR_clock_settime (__NR_SYSCALL_BASE + 262) +#define __NR_clock_gettime (__NR_SYSCALL_BASE + 263) +#define __NR_clock_getres (__NR_SYSCALL_BASE + 264) +#define __NR_clock_nanosleep (__NR_SYSCALL_BASE + 265) +#define __NR_statfs64 (__NR_SYSCALL_BASE + 266) +#define __NR_fstatfs64 (__NR_SYSCALL_BASE + 267) +#define __NR_tgkill (__NR_SYSCALL_BASE + 268) +#define __NR_utimes (__NR_SYSCALL_BASE + 269) +#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE + 270) +#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE + 271) +#define __NR_pciconfig_read (__NR_SYSCALL_BASE + 272) +#define __NR_pciconfig_write (__NR_SYSCALL_BASE + 273) +#define __NR_mq_open (__NR_SYSCALL_BASE + 274) +#define __NR_mq_unlink (__NR_SYSCALL_BASE + 275) +#define __NR_mq_timedsend (__NR_SYSCALL_BASE + 276) +#define __NR_mq_timedreceive (__NR_SYSCALL_BASE + 277) +#define __NR_mq_notify (__NR_SYSCALL_BASE + 278) +#define __NR_mq_getsetattr (__NR_SYSCALL_BASE + 279) +#define __NR_waitid (__NR_SYSCALL_BASE + 280) +#define __NR_socket (__NR_SYSCALL_BASE + 281) +#define __NR_bind (__NR_SYSCALL_BASE + 282) +#define __NR_connect (__NR_SYSCALL_BASE + 283) +#define __NR_listen (__NR_SYSCALL_BASE + 284) +#define __NR_accept (__NR_SYSCALL_BASE + 285) +#define __NR_getsockname (__NR_SYSCALL_BASE + 286) +#define __NR_getpeername (__NR_SYSCALL_BASE + 287) +#define __NR_socketpair (__NR_SYSCALL_BASE + 288) +#define __NR_send (__NR_SYSCALL_BASE + 289) +#define __NR_sendto (__NR_SYSCALL_BASE + 290) +#define __NR_recv (__NR_SYSCALL_BASE + 291) +#define __NR_recvfrom (__NR_SYSCALL_BASE + 292) +#define __NR_shutdown (__NR_SYSCALL_BASE + 293) +#define __NR_setsockopt (__NR_SYSCALL_BASE + 294) +#define __NR_getsockopt (__NR_SYSCALL_BASE + 295) +#define __NR_sendmsg (__NR_SYSCALL_BASE + 296) +#define __NR_recvmsg (__NR_SYSCALL_BASE + 297) +#define __NR_semop (__NR_SYSCALL_BASE + 298) +#define __NR_semget (__NR_SYSCALL_BASE + 299) +#define __NR_semctl (__NR_SYSCALL_BASE + 300) +#define __NR_msgsnd (__NR_SYSCALL_BASE + 301) +#define __NR_msgrcv (__NR_SYSCALL_BASE + 302) +#define __NR_msgget (__NR_SYSCALL_BASE + 303) +#define __NR_msgctl (__NR_SYSCALL_BASE + 304) +#define __NR_shmat (__NR_SYSCALL_BASE + 305) +#define __NR_shmdt (__NR_SYSCALL_BASE + 306) +#define __NR_shmget (__NR_SYSCALL_BASE + 307) +#define __NR_shmctl (__NR_SYSCALL_BASE + 308) +#define __NR_add_key (__NR_SYSCALL_BASE + 309) +#define __NR_request_key (__NR_SYSCALL_BASE + 310) +#define __NR_keyctl (__NR_SYSCALL_BASE + 311) +#define __NR_semtimedop (__NR_SYSCALL_BASE + 312) +#define __NR_vserver (__NR_SYSCALL_BASE + 313) +#define __NR_ioprio_set (__NR_SYSCALL_BASE + 314) +#define __NR_ioprio_get (__NR_SYSCALL_BASE + 315) +#define __NR_inotify_init (__NR_SYSCALL_BASE + 316) +#define __NR_inotify_add_watch (__NR_SYSCALL_BASE + 317) +#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE + 318) +#define __NR_mbind (__NR_SYSCALL_BASE + 319) +#define __NR_get_mempolicy (__NR_SYSCALL_BASE + 320) +#define __NR_set_mempolicy (__NR_SYSCALL_BASE + 321) +#define __NR_openat (__NR_SYSCALL_BASE + 322) +#define __NR_mkdirat (__NR_SYSCALL_BASE + 323) +#define __NR_mknodat (__NR_SYSCALL_BASE + 324) +#define __NR_fchownat (__NR_SYSCALL_BASE + 325) +#define __NR_futimesat (__NR_SYSCALL_BASE + 326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE + 327) +#define __NR_unlinkat (__NR_SYSCALL_BASE + 328) +#define __NR_renameat (__NR_SYSCALL_BASE + 329) +#define __NR_linkat (__NR_SYSCALL_BASE + 330) +#define __NR_symlinkat (__NR_SYSCALL_BASE + 331) +#define __NR_readlinkat (__NR_SYSCALL_BASE + 332) +#define __NR_fchmodat (__NR_SYSCALL_BASE + 333) +#define __NR_faccessat (__NR_SYSCALL_BASE + 334) +#define __NR_pselect6 (__NR_SYSCALL_BASE + 335) +#define __NR_ppoll (__NR_SYSCALL_BASE + 336) +#define __NR_unshare (__NR_SYSCALL_BASE + 337) +#define __NR_set_robust_list (__NR_SYSCALL_BASE + 338) +#define __NR_get_robust_list (__NR_SYSCALL_BASE + 339) +#define __NR_splice (__NR_SYSCALL_BASE + 340) +#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE + 341) +#define __NR_tee (__NR_SYSCALL_BASE + 342) +#define __NR_vmsplice (__NR_SYSCALL_BASE + 343) +#define __NR_move_pages (__NR_SYSCALL_BASE + 344) +#define __NR_getcpu (__NR_SYSCALL_BASE + 345) +#define __NR_epoll_pwait (__NR_SYSCALL_BASE + 346) +#define __NR_kexec_load (__NR_SYSCALL_BASE + 347) +#define __NR_utimensat (__NR_SYSCALL_BASE + 348) +#define __NR_signalfd (__NR_SYSCALL_BASE + 349) +#define __NR_timerfd_create (__NR_SYSCALL_BASE + 350) +#define __NR_eventfd (__NR_SYSCALL_BASE + 351) +#define __NR_fallocate (__NR_SYSCALL_BASE + 352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE + 353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE + 354) +#define __NR_signalfd4 (__NR_SYSCALL_BASE + 355) +#define __NR_eventfd2 (__NR_SYSCALL_BASE + 356) +#define __NR_epoll_create1 (__NR_SYSCALL_BASE + 357) +#define __NR_dup3 (__NR_SYSCALL_BASE + 358) +#define __NR_pipe2 (__NR_SYSCALL_BASE + 359) +#define __NR_inotify_init1 (__NR_SYSCALL_BASE + 360) +#define __NR_preadv (__NR_SYSCALL_BASE + 361) +#define __NR_pwritev (__NR_SYSCALL_BASE + 362) +#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE + 363) +#define __NR_perf_event_open (__NR_SYSCALL_BASE + 364) +#define __NR_recvmmsg (__NR_SYSCALL_BASE + 365) +#define __NR_accept4 (__NR_SYSCALL_BASE + 366) +#define __NR_fanotify_init (__NR_SYSCALL_BASE + 367) +#define __NR_fanotify_mark (__NR_SYSCALL_BASE + 368) +#define __NR_prlimit64 (__NR_SYSCALL_BASE + 369) +#define __NR_name_to_handle_at (__NR_SYSCALL_BASE + 370) +#define __NR_open_by_handle_at (__NR_SYSCALL_BASE + 371) +#define __NR_clock_adjtime (__NR_SYSCALL_BASE + 372) +#define __NR_syncfs (__NR_SYSCALL_BASE + 373) +#define __NR_sendmmsg (__NR_SYSCALL_BASE + 374) +#define __NR_setns (__NR_SYSCALL_BASE + 375) +#define __NR_process_vm_readv (__NR_SYSCALL_BASE + 376) +#define __NR_process_vm_writev (__NR_SYSCALL_BASE + 377) +#define __NR_kcmp (__NR_SYSCALL_BASE + 378) +#define __NR_finit_module (__NR_SYSCALL_BASE + 379) +#define __NR_sched_setattr (__NR_SYSCALL_BASE + 380) +#define __NR_sched_getattr (__NR_SYSCALL_BASE + 381) +#define __NR_renameat2 (__NR_SYSCALL_BASE + 382) +#define __NR_seccomp (__NR_SYSCALL_BASE + 383) +#define __NR_getrandom (__NR_SYSCALL_BASE + 384) +#define __NR_memfd_create (__NR_SYSCALL_BASE + 385) +#define __NR_bpf (__NR_SYSCALL_BASE + 386) +#define __NR_execveat (__NR_SYSCALL_BASE + 387) +#define __NR_userfaultfd (__NR_SYSCALL_BASE + 388) +#define __NR_membarrier (__NR_SYSCALL_BASE + 389) +#define __NR_mlock2 (__NR_SYSCALL_BASE + 390) +#define __NR_copy_file_range (__NR_SYSCALL_BASE + 391) +#define __NR_preadv2 (__NR_SYSCALL_BASE + 392) +#define __NR_pwritev2 (__NR_SYSCALL_BASE + 393) +#define __NR_pkey_mprotect (__NR_SYSCALL_BASE + 394) +#define __NR_pkey_alloc (__NR_SYSCALL_BASE + 395) +#define __NR_pkey_free (__NR_SYSCALL_BASE + 396) + +#endif /* _ASM_ARM_UNISTD_COMMON_H */ diff --git a/linux-headers/asm-arm/unistd-eabi.h b/linux-headers/asm-arm/unistd-eabi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-eabi.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_EABI_H +#define _ASM_ARM_UNISTD_EABI_H 1 + + +#endif /* _ASM_ARM_UNISTD_EABI_H */ diff --git a/linux-headers/asm-arm/unistd-oabi.h b/linux-headers/asm-arm/unistd-oabi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/linux-headers/asm-arm/unistd-oabi.h @@ -XXX,XX +XXX,XX @@ +#ifndef _ASM_ARM_UNISTD_OABI_H +#define _ASM_ARM_UNISTD_OABI_H 1 + +#define __NR_time (__NR_SYSCALL_BASE + 13) +#define __NR_umount (__NR_SYSCALL_BASE + 22) +#define __NR_stime (__NR_SYSCALL_BASE + 25) +#define __NR_alarm (__NR_SYSCALL_BASE + 27) +#define __NR_utime (__NR_SYSCALL_BASE + 30) +#define __NR_getrlimit (__NR_SYSCALL_BASE + 76) +#define __NR_select (__NR_SYSCALL_BASE + 82) +#define __NR_readdir (__NR_SYSCALL_BASE + 89) +#define __NR_mmap (__NR_SYSCALL_BASE + 90) +#define __NR_socketcall (__NR_SYSCALL_BASE + 102) +#define __NR_syscall (__NR_SYSCALL_BASE + 113) +#define __NR_ipc (__NR_SYSCALL_BASE + 117) + +#endif /* _ASM_ARM_UNISTD_OABI_H */ diff --git a/linux-headers/asm-arm/unistd.h b/linux-headers/asm-arm/unistd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm/unistd.h +++ b/linux-headers/asm-arm/unistd.h @@ -XXX,XX +XXX,XX @@ #if defined(__thumb__) || defined(__ARM_EABI__) #define __NR_SYSCALL_BASE 0 +#include <asm/unistd-eabi.h> #else #define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE +#include <asm/unistd-oabi.h> #endif -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) -#define __NR_exit (__NR_SYSCALL_BASE+ 1) -#define __NR_fork (__NR_SYSCALL_BASE+ 2) -#define __NR_read (__NR_SYSCALL_BASE+ 3) -#define __NR_write (__NR_SYSCALL_BASE+ 4) -#define __NR_open (__NR_SYSCALL_BASE+ 5) -#define __NR_close (__NR_SYSCALL_BASE+ 6) - /* 7 was sys_waitpid */ -#define __NR_creat (__NR_SYSCALL_BASE+ 8) -#define __NR_link (__NR_SYSCALL_BASE+ 9) -#define __NR_unlink (__NR_SYSCALL_BASE+ 10) -#define __NR_execve (__NR_SYSCALL_BASE+ 11) -#define __NR_chdir (__NR_SYSCALL_BASE+ 12) -#define __NR_time (__NR_SYSCALL_BASE+ 13) -#define __NR_mknod (__NR_SYSCALL_BASE+ 14) -#define __NR_chmod (__NR_SYSCALL_BASE+ 15) -#define __NR_lchown (__NR_SYSCALL_BASE+ 16) - /* 17 was sys_break */ - /* 18 was sys_stat */ -#define __NR_lseek (__NR_SYSCALL_BASE+ 19) -#define __NR_getpid (__NR_SYSCALL_BASE+ 20) -#define __NR_mount (__NR_SYSCALL_BASE+ 21) -#define __NR_umount (__NR_SYSCALL_BASE+ 22) -#define __NR_setuid (__NR_SYSCALL_BASE+ 23) -#define __NR_getuid (__NR_SYSCALL_BASE+ 24) -#define __NR_stime (__NR_SYSCALL_BASE+ 25) -#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) -#define __NR_alarm (__NR_SYSCALL_BASE+ 27) - /* 28 was sys_fstat */ -#define __NR_pause (__NR_SYSCALL_BASE+ 29) -#define __NR_utime (__NR_SYSCALL_BASE+ 30) - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access (__NR_SYSCALL_BASE+ 33) -#define __NR_nice (__NR_SYSCALL_BASE+ 34) - /* 35 was sys_ftime */ -#define __NR_sync (__NR_SYSCALL_BASE+ 36) -#define __NR_kill (__NR_SYSCALL_BASE+ 37) -#define __NR_rename (__NR_SYSCALL_BASE+ 38) -#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) -#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) -#define __NR_dup (__NR_SYSCALL_BASE+ 41) -#define __NR_pipe (__NR_SYSCALL_BASE+ 42) -#define __NR_times (__NR_SYSCALL_BASE+ 43) - /* 44 was sys_prof */ -#define __NR_brk (__NR_SYSCALL_BASE+ 45) -#define __NR_setgid (__NR_SYSCALL_BASE+ 46) -#define __NR_getgid (__NR_SYSCALL_BASE+ 47) - /* 48 was sys_signal */ -#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) -#define __NR_getegid (__NR_SYSCALL_BASE+ 50) -#define __NR_acct (__NR_SYSCALL_BASE+ 51) -#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) - /* 53 was sys_lock */ -#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) -#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) - /* 56 was sys_mpx */ -#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask (__NR_SYSCALL_BASE+ 60) -#define __NR_chroot (__NR_SYSCALL_BASE+ 61) -#define __NR_ustat (__NR_SYSCALL_BASE+ 62) -#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) -#define __NR_getppid (__NR_SYSCALL_BASE+ 64) -#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) -#define __NR_setsid (__NR_SYSCALL_BASE+ 66) -#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) - /* 68 was sys_sgetmask */ - /* 69 was sys_ssetmask */ -#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) -#define __NR_setregid (__NR_SYSCALL_BASE+ 71) -#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) -#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) -#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) -#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) -#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ -#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) -#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) -#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) -#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) -#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) -#define __NR_select (__NR_SYSCALL_BASE+ 82) -#define __NR_symlink (__NR_SYSCALL_BASE+ 83) - /* 84 was sys_lstat */ -#define __NR_readlink (__NR_SYSCALL_BASE+ 85) -#define __NR_uselib (__NR_SYSCALL_BASE+ 86) -#define __NR_swapon (__NR_SYSCALL_BASE+ 87) -#define __NR_reboot (__NR_SYSCALL_BASE+ 88) -#define __NR_readdir (__NR_SYSCALL_BASE+ 89) -#define __NR_mmap (__NR_SYSCALL_BASE+ 90) -#define __NR_munmap (__NR_SYSCALL_BASE+ 91) -#define __NR_truncate (__NR_SYSCALL_BASE+ 92) -#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) -#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) -#define __NR_fchown (__NR_SYSCALL_BASE+ 95) -#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) -#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) - /* 98 was sys_profil */ -#define __NR_statfs (__NR_SYSCALL_BASE+ 99) -#define __NR_fstatfs (__NR_SYSCALL_BASE+100) - /* 101 was sys_ioperm */ -#define __NR_socketcall (__NR_SYSCALL_BASE+102) -#define __NR_syslog (__NR_SYSCALL_BASE+103) -#define __NR_setitimer (__NR_SYSCALL_BASE+104) -#define __NR_getitimer (__NR_SYSCALL_BASE+105) -#define __NR_stat (__NR_SYSCALL_BASE+106) -#define __NR_lstat (__NR_SYSCALL_BASE+107) -#define __NR_fstat (__NR_SYSCALL_BASE+108) - /* 109 was sys_uname */ - /* 110 was sys_iopl */ -#define __NR_vhangup (__NR_SYSCALL_BASE+111) - /* 112 was sys_idle */ -#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ -#define __NR_wait4 (__NR_SYSCALL_BASE+114) -#define __NR_swapoff (__NR_SYSCALL_BASE+115) -#define __NR_sysinfo (__NR_SYSCALL_BASE+116) -#define __NR_ipc (__NR_SYSCALL_BASE+117) -#define __NR_fsync (__NR_SYSCALL_BASE+118) -#define __NR_sigreturn (__NR_SYSCALL_BASE+119) -#define __NR_clone (__NR_SYSCALL_BASE+120) -#define __NR_setdomainname (__NR_SYSCALL_BASE+121) -#define __NR_uname (__NR_SYSCALL_BASE+122) - /* 123 was sys_modify_ldt */ -#define __NR_adjtimex (__NR_SYSCALL_BASE+124) -#define __NR_mprotect (__NR_SYSCALL_BASE+125) -#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) - /* 127 was sys_create_module */ -#define __NR_init_module (__NR_SYSCALL_BASE+128) -#define __NR_delete_module (__NR_SYSCALL_BASE+129) - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl (__NR_SYSCALL_BASE+131) -#define __NR_getpgid (__NR_SYSCALL_BASE+132) -#define __NR_fchdir (__NR_SYSCALL_BASE+133) -#define __NR_bdflush (__NR_SYSCALL_BASE+134) -#define __NR_sysfs (__NR_SYSCALL_BASE+135) -#define __NR_personality (__NR_SYSCALL_BASE+136) - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid (__NR_SYSCALL_BASE+138) -#define __NR_setfsgid (__NR_SYSCALL_BASE+139) -#define __NR__llseek (__NR_SYSCALL_BASE+140) -#define __NR_getdents (__NR_SYSCALL_BASE+141) -#define __NR__newselect (__NR_SYSCALL_BASE+142) -#define __NR_flock (__NR_SYSCALL_BASE+143) -#define __NR_msync (__NR_SYSCALL_BASE+144) -#define __NR_readv (__NR_SYSCALL_BASE+145) -#define __NR_writev (__NR_SYSCALL_BASE+146) -#define __NR_getsid (__NR_SYSCALL_BASE+147) -#define __NR_fdatasync (__NR_SYSCALL_BASE+148) -#define __NR__sysctl (__NR_SYSCALL_BASE+149) -#define __NR_mlock (__NR_SYSCALL_BASE+150) -#define __NR_munlock (__NR_SYSCALL_BASE+151) -#define __NR_mlockall (__NR_SYSCALL_BASE+152) -#define __NR_munlockall (__NR_SYSCALL_BASE+153) -#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) -#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) -#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) -#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) -#define __NR_sched_yield (__NR_SYSCALL_BASE+158) -#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) -#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) -#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) -#define __NR_nanosleep (__NR_SYSCALL_BASE+162) -#define __NR_mremap (__NR_SYSCALL_BASE+163) -#define __NR_setresuid (__NR_SYSCALL_BASE+164) -#define __NR_getresuid (__NR_SYSCALL_BASE+165) - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll (__NR_SYSCALL_BASE+168) -#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) -#define __NR_setresgid (__NR_SYSCALL_BASE+170) -#define __NR_getresgid (__NR_SYSCALL_BASE+171) -#define __NR_prctl (__NR_SYSCALL_BASE+172) -#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) -#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) -#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) -#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) -#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) -#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) -#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) -#define __NR_pread64 (__NR_SYSCALL_BASE+180) -#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) -#define __NR_chown (__NR_SYSCALL_BASE+182) -#define __NR_getcwd (__NR_SYSCALL_BASE+183) -#define __NR_capget (__NR_SYSCALL_BASE+184) -#define __NR_capset (__NR_SYSCALL_BASE+185) -#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) -#define __NR_sendfile (__NR_SYSCALL_BASE+187) - /* 188 reserved */ - /* 189 reserved */ -#define __NR_vfork (__NR_SYSCALL_BASE+190) -#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ -#define __NR_mmap2 (__NR_SYSCALL_BASE+192) -#define __NR_truncate64 (__NR_SYSCALL_BASE+193) -#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) -#define __NR_stat64 (__NR_SYSCALL_BASE+195) -#define __NR_lstat64 (__NR_SYSCALL_BASE+196) -#define __NR_fstat64 (__NR_SYSCALL_BASE+197) -#define __NR_lchown32 (__NR_SYSCALL_BASE+198) -#define __NR_getuid32 (__NR_SYSCALL_BASE+199) -#define __NR_getgid32 (__NR_SYSCALL_BASE+200) -#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) -#define __NR_getegid32 (__NR_SYSCALL_BASE+202) -#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) -#define __NR_setregid32 (__NR_SYSCALL_BASE+204) -#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) -#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) -#define __NR_fchown32 (__NR_SYSCALL_BASE+207) -#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) -#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) -#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) -#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) -#define __NR_chown32 (__NR_SYSCALL_BASE+212) -#define __NR_setuid32 (__NR_SYSCALL_BASE+213) -#define __NR_setgid32 (__NR_SYSCALL_BASE+214) -#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) -#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) -#define __NR_getdents64 (__NR_SYSCALL_BASE+217) -#define __NR_pivot_root (__NR_SYSCALL_BASE+218) -#define __NR_mincore (__NR_SYSCALL_BASE+219) -#define __NR_madvise (__NR_SYSCALL_BASE+220) -#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) - /* 222 for tux */ - /* 223 is unused */ -#define __NR_gettid (__NR_SYSCALL_BASE+224) -#define __NR_readahead (__NR_SYSCALL_BASE+225) -#define __NR_setxattr (__NR_SYSCALL_BASE+226) -#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) -#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) -#define __NR_getxattr (__NR_SYSCALL_BASE+229) -#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) -#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) -#define __NR_listxattr (__NR_SYSCALL_BASE+232) -#define __NR_llistxattr (__NR_SYSCALL_BASE+233) -#define __NR_flistxattr (__NR_SYSCALL_BASE+234) -#define __NR_removexattr (__NR_SYSCALL_BASE+235) -#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) -#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) -#define __NR_tkill (__NR_SYSCALL_BASE+238) -#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) -#define __NR_futex (__NR_SYSCALL_BASE+240) -#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) -#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) -#define __NR_io_setup (__NR_SYSCALL_BASE+243) -#define __NR_io_destroy (__NR_SYSCALL_BASE+244) -#define __NR_io_getevents (__NR_SYSCALL_BASE+245) -#define __NR_io_submit (__NR_SYSCALL_BASE+246) -#define __NR_io_cancel (__NR_SYSCALL_BASE+247) -#define __NR_exit_group (__NR_SYSCALL_BASE+248) -#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) -#define __NR_epoll_create (__NR_SYSCALL_BASE+250) -#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) -#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) -#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) - /* 254 for set_thread_area */ - /* 255 for get_thread_area */ -#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) -#define __NR_timer_create (__NR_SYSCALL_BASE+257) -#define __NR_timer_settime (__NR_SYSCALL_BASE+258) -#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) -#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) -#define __NR_timer_delete (__NR_SYSCALL_BASE+261) -#define __NR_clock_settime (__NR_SYSCALL_BASE+262) -#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) -#define __NR_clock_getres (__NR_SYSCALL_BASE+264) -#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) -#define __NR_statfs64 (__NR_SYSCALL_BASE+266) -#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) -#define __NR_tgkill (__NR_SYSCALL_BASE+268) -#define __NR_utimes (__NR_SYSCALL_BASE+269) -#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) -#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) -#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) -#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) -#define __NR_mq_open (__NR_SYSCALL_BASE+274) -#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) -#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) -#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) -#define __NR_mq_notify (__NR_SYSCALL_BASE+278) -#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) -#define __NR_waitid (__NR_SYSCALL_BASE+280) -#define __NR_socket (__NR_SYSCALL_BASE+281) -#define __NR_bind (__NR_SYSCALL_BASE+282) -#define __NR_connect (__NR_SYSCALL_BASE+283) -#define __NR_listen (__NR_SYSCALL_BASE+284) -#define __NR_accept (__NR_SYSCALL_BASE+285) -#define __NR_getsockname (__NR_SYSCALL_BASE+286) -#define __NR_getpeername (__NR_SYSCALL_BASE+287) -#define __NR_socketpair (__NR_SYSCALL_BASE+288) -#define __NR_send (__NR_SYSCALL_BASE+289) -#define __NR_sendto (__NR_SYSCALL_BASE+290) -#define __NR_recv (__NR_SYSCALL_BASE+291) -#define __NR_recvfrom (__NR_SYSCALL_BASE+292) -#define __NR_shutdown (__NR_SYSCALL_BASE+293) -#define __NR_setsockopt (__NR_SYSCALL_BASE+294) -#define __NR_getsockopt (__NR_SYSCALL_BASE+295) -#define __NR_sendmsg (__NR_SYSCALL_BASE+296) -#define __NR_recvmsg (__NR_SYSCALL_BASE+297) -#define __NR_semop (__NR_SYSCALL_BASE+298) -#define __NR_semget (__NR_SYSCALL_BASE+299) -#define __NR_semctl (__NR_SYSCALL_BASE+300) -#define __NR_msgsnd (__NR_SYSCALL_BASE+301) -#define __NR_msgrcv (__NR_SYSCALL_BASE+302) -#define __NR_msgget (__NR_SYSCALL_BASE+303) -#define __NR_msgctl (__NR_SYSCALL_BASE+304) -#define __NR_shmat (__NR_SYSCALL_BASE+305) -#define __NR_shmdt (__NR_SYSCALL_BASE+306) -#define __NR_shmget (__NR_SYSCALL_BASE+307) -#define __NR_shmctl (__NR_SYSCALL_BASE+308) -#define __NR_add_key (__NR_SYSCALL_BASE+309) -#define __NR_request_key (__NR_SYSCALL_BASE+310) -#define __NR_keyctl (__NR_SYSCALL_BASE+311) -#define __NR_semtimedop (__NR_SYSCALL_BASE+312) -#define __NR_vserver (__NR_SYSCALL_BASE+313) -#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) -#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) -#define __NR_inotify_init (__NR_SYSCALL_BASE+316) -#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) -#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) -#define __NR_mbind (__NR_SYSCALL_BASE+319) -#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) -#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) -#define __NR_openat (__NR_SYSCALL_BASE+322) -#define __NR_mkdirat (__NR_SYSCALL_BASE+323) -#define __NR_mknodat (__NR_SYSCALL_BASE+324) -#define __NR_fchownat (__NR_SYSCALL_BASE+325) -#define __NR_futimesat (__NR_SYSCALL_BASE+326) -#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) -#define __NR_unlinkat (__NR_SYSCALL_BASE+328) -#define __NR_renameat (__NR_SYSCALL_BASE+329) -#define __NR_linkat (__NR_SYSCALL_BASE+330) -#define __NR_symlinkat (__NR_SYSCALL_BASE+331) -#define __NR_readlinkat (__NR_SYSCALL_BASE+332) -#define __NR_fchmodat (__NR_SYSCALL_BASE+333) -#define __NR_faccessat (__NR_SYSCALL_BASE+334) -#define __NR_pselect6 (__NR_SYSCALL_BASE+335) -#define __NR_ppoll (__NR_SYSCALL_BASE+336) -#define __NR_unshare (__NR_SYSCALL_BASE+337) -#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) -#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) -#define __NR_splice (__NR_SYSCALL_BASE+340) -#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) +#include <asm/unistd-common.h> #define __NR_sync_file_range2 __NR_arm_sync_file_range -#define __NR_tee (__NR_SYSCALL_BASE+342) -#define __NR_vmsplice (__NR_SYSCALL_BASE+343) -#define __NR_move_pages (__NR_SYSCALL_BASE+344) -#define __NR_getcpu (__NR_SYSCALL_BASE+345) -#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346) -#define __NR_kexec_load (__NR_SYSCALL_BASE+347) -#define __NR_utimensat (__NR_SYSCALL_BASE+348) -#define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) -#define __NR_eventfd (__NR_SYSCALL_BASE+351) -#define __NR_fallocate (__NR_SYSCALL_BASE+352) -#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) -#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) -#define __NR_signalfd4 (__NR_SYSCALL_BASE+355) -#define __NR_eventfd2 (__NR_SYSCALL_BASE+356) -#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357) -#define __NR_dup3 (__NR_SYSCALL_BASE+358) -#define __NR_pipe2 (__NR_SYSCALL_BASE+359) -#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) -#define __NR_preadv (__NR_SYSCALL_BASE+361) -#define __NR_pwritev (__NR_SYSCALL_BASE+362) -#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363) -#define __NR_perf_event_open (__NR_SYSCALL_BASE+364) -#define __NR_recvmmsg (__NR_SYSCALL_BASE+365) -#define __NR_accept4 (__NR_SYSCALL_BASE+366) -#define __NR_fanotify_init (__NR_SYSCALL_BASE+367) -#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) -#define __NR_prlimit64 (__NR_SYSCALL_BASE+369) -#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) -#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) -#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) -#define __NR_syncfs (__NR_SYSCALL_BASE+373) -#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) -#define __NR_setns (__NR_SYSCALL_BASE+375) -#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) -#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) -#define __NR_kcmp (__NR_SYSCALL_BASE+378) -#define __NR_finit_module (__NR_SYSCALL_BASE+379) -#define __NR_sched_setattr (__NR_SYSCALL_BASE+380) -#define __NR_sched_getattr (__NR_SYSCALL_BASE+381) -#define __NR_renameat2 (__NR_SYSCALL_BASE+382) -#define __NR_seccomp (__NR_SYSCALL_BASE+383) -#define __NR_getrandom (__NR_SYSCALL_BASE+384) -#define __NR_memfd_create (__NR_SYSCALL_BASE+385) -#define __NR_bpf (__NR_SYSCALL_BASE+386) -#define __NR_execveat (__NR_SYSCALL_BASE+387) -#define __NR_userfaultfd (__NR_SYSCALL_BASE+388) -#define __NR_membarrier (__NR_SYSCALL_BASE+389) -#define __NR_mlock2 (__NR_SYSCALL_BASE+390) -#define __NR_copy_file_range (__NR_SYSCALL_BASE+391) -#define __NR_preadv2 (__NR_SYSCALL_BASE+392) -#define __NR_pwritev2 (__NR_SYSCALL_BASE+393) /* * The following SWIs are ARM private. @@ -XXX,XX +XXX,XX @@ #define __ARM_NR_usr32 (__ARM_NR_BASE+4) #define __ARM_NR_set_tls (__ARM_NR_BASE+5) -/* - * The following syscalls are obsolete and no longer available for EABI. - */ -#if defined(__ARM_EABI__) -#undef __NR_time -#undef __NR_umount -#undef __NR_stime -#undef __NR_alarm -#undef __NR_utime -#undef __NR_getrlimit -#undef __NR_select -#undef __NR_readdir -#undef __NR_mmap -#undef __NR_socketcall -#undef __NR_syscall -#undef __NR_ipc -#endif - #endif /* __ASM_ARM_UNISTD_H */ diff --git a/linux-headers/asm-arm64/kvm.h b/linux-headers/asm-arm64/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm64/kvm.h +++ b/linux-headers/asm-arm64/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 #define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 +#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ + (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) #define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 #define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 +#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 +#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ + (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff +#define VGIC_LEVEL_INFO_LINE_LEVEL 0 + #define KVM_DEV_ARM_VGIC_CTRL_INIT 0 /* Device Control API on vcpu fd */ diff --git a/linux-headers/asm-powerpc/kvm.h b/linux-headers/asm-powerpc/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/kvm.h +++ b/linux-headers/asm-powerpc/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { __u16 n_invalid; }; +/* For KVM_PPC_CONFIGURE_V3_MMU */ +struct kvm_ppc_mmuv3_cfg { + __u64 flags; + __u64 process_table; /* second doubleword of partition table entry */ +}; + +/* Flag values for KVM_PPC_CONFIGURE_V3_MMU */ +#define KVM_PPC_MMUV3_RADIX 1 /* 1 = radix mode, 0 = HPT */ +#define KVM_PPC_MMUV3_GTSE 2 /* global translation shootdown enb. */ + +/* For KVM_PPC_GET_RMMU_INFO */ +struct kvm_ppc_rmmu_info { + struct kvm_ppc_radix_geom { + __u8 page_shift; + __u8 level_bits[4]; + __u8 pad[3]; + } geometries[8]; + __u32 ap_encodings[8]; +}; + /* Per-vcpu XICS interrupt controller state */ #define KVM_REG_PPC_ICP_STATE (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8c) @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_REG_PPC_SPRG9 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xba) #define KVM_REG_PPC_DBSR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbb) +/* POWER9 registers */ +#define KVM_REG_PPC_TIDR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbc) +#define KVM_REG_PPC_PSSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd) + /* Transactional Memory checkpointed state: * This is all GPRs, all VSX regs and a subset of SPRs */ @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_REG_PPC_TM_VSCR (KVM_REG_PPC_TM | KVM_REG_SIZE_U32 | 0x67) #define KVM_REG_PPC_TM_DSCR (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x68) #define KVM_REG_PPC_TM_TAR (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x69) +#define KVM_REG_PPC_TM_XER (KVM_REG_PPC_TM | KVM_REG_SIZE_U64 | 0x6a) /* PPC64 eXternal Interrupt Controller Specification */ #define KVM_DEV_XICS_GRP_SOURCES 1 /* 64-bit source attributes */ @@ -XXX,XX +XXX,XX @@ struct kvm_get_htab_header { #define KVM_XICS_LEVEL_SENSITIVE (1ULL << 40) #define KVM_XICS_MASKED (1ULL << 41) #define KVM_XICS_PENDING (1ULL << 42) +#define KVM_XICS_PRESENTED (1ULL << 43) +#define KVM_XICS_QUEUED (1ULL << 44) #endif /* __LINUX_KVM_POWERPC_H */ diff --git a/linux-headers/asm-powerpc/unistd.h b/linux-headers/asm-powerpc/unistd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/unistd.h +++ b/linux-headers/asm-powerpc/unistd.h @@ -XXX,XX +XXX,XX @@ #define __NR_copy_file_range 379 #define __NR_preadv2 380 #define __NR_pwritev2 381 +#define __NR_kexec_file_load 382 #endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/linux-headers/asm-x86/kvm_para.h b/linux-headers/asm-x86/kvm_para.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-x86/kvm_para.h +++ b/linux-headers/asm-x86/kvm_para.h @@ -XXX,XX +XXX,XX @@ struct kvm_steal_time { __u64 steal; __u32 version; __u32 flags; - __u32 pad[12]; + __u8 preempted; + __u8 u8_pad[3]; + __u32 pad[11]; +}; + +#define KVM_CLOCK_PAIRING_WALLCLOCK 0 +struct kvm_clock_pairing { + __s64 sec; + __s64 nsec; + __u64 tsc; + __u32 flags; + __u32 pad[9]; }; #define KVM_STEAL_ALIGNMENT_BITS 5 diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/kvm.h +++ b/linux-headers/linux/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_hyperv_exit { struct kvm_run { /* in */ __u8 request_interrupt_window; - __u8 padding1[7]; + __u8 immediate_exit; + __u8 padding1[6]; /* out */ __u32 exit_reason; @@ -XXX,XX +XXX,XX @@ struct kvm_enable_cap { }; /* for KVM_PPC_GET_PVINFO */ + +#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) + struct kvm_ppc_pvinfo { /* out */ __u32 flags; @@ -XXX,XX +XXX,XX @@ struct kvm_ppc_smmu_info { struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; }; -#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) +/* for KVM_PPC_RESIZE_HPT_{PREPARE,COMMIT} */ +struct kvm_ppc_resize_hpt { + __u64 flags; + __u32 shift; + __u32 pad; +}; #define KVMIO 0xAE @@ -XXX,XX +XXX,XX @@ struct kvm_ppc_smmu_info { #define KVM_CAP_S390_USER_INSTR0 130 #define KVM_CAP_MSI_DEVID 131 #define KVM_CAP_PPC_HTM 132 +#define KVM_CAP_SPAPR_RESIZE_HPT 133 +#define KVM_CAP_PPC_MMU_RADIX 134 +#define KVM_CAP_PPC_MMU_HASH_V3 135 +#define KVM_CAP_IMMEDIATE_EXIT 136 #ifdef KVM_CAP_IRQ_ROUTING @@ -XXX,XX +XXX,XX @@ struct kvm_s390_ucas_mapping { #define KVM_ARM_SET_DEVICE_ADDR _IOW(KVMIO, 0xab, struct kvm_arm_device_addr) /* Available with KVM_CAP_PPC_RTAS */ #define KVM_PPC_RTAS_DEFINE_TOKEN _IOW(KVMIO, 0xac, struct kvm_rtas_token_args) +/* Available with KVM_CAP_SPAPR_RESIZE_HPT */ +#define KVM_PPC_RESIZE_HPT_PREPARE _IOR(KVMIO, 0xad, struct kvm_ppc_resize_hpt) +#define KVM_PPC_RESIZE_HPT_COMMIT _IOR(KVMIO, 0xae, struct kvm_ppc_resize_hpt) +/* Available with KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 */ +#define KVM_PPC_CONFIGURE_V3_MMU _IOW(KVMIO, 0xaf, struct kvm_ppc_mmuv3_cfg) +/* Available with KVM_CAP_PPC_RADIX_MMU */ +#define KVM_PPC_GET_RMMU_INFO _IOW(KVMIO, 0xb0, struct kvm_ppc_rmmu_info) /* ioctl for vm fd */ #define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) diff --git a/linux-headers/linux/kvm_para.h b/linux-headers/linux/kvm_para.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/kvm_para.h +++ b/linux-headers/linux/kvm_para.h @@ -XXX,XX +XXX,XX @@ #define KVM_EFAULT EFAULT #define KVM_E2BIG E2BIG #define KVM_EPERM EPERM +#define KVM_EOPNOTSUPP 95 #define KVM_HC_VAPIC_POLL_IRQ 1 #define KVM_HC_MMU_OP 2 @@ -XXX,XX +XXX,XX @@ #define KVM_HC_MIPS_GET_CLOCK_FREQ 6 #define KVM_HC_MIPS_EXIT_VM 7 #define KVM_HC_MIPS_CONSOLE_OUTPUT 8 +#define KVM_HC_CLOCK_PAIRING 9 /* * hypercalls use architecture specific diff --git a/linux-headers/linux/userfaultfd.h b/linux-headers/linux/userfaultfd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/userfaultfd.h +++ b/linux-headers/linux/userfaultfd.h @@ -XXX,XX +XXX,XX @@ #include <linux/types.h> -#define UFFD_API ((__u64)0xAA) /* - * After implementing the respective features it will become: - * #define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | \ - * UFFD_FEATURE_EVENT_FORK) + * If the UFFDIO_API is upgraded someday, the UFFDIO_UNREGISTER and + * UFFDIO_WAKE ioctls should be defined as _IOW and not as _IOR. In + * userfaultfd.h we assumed the kernel was reading (instead _IOC_READ + * means the userland is reading). */ -#define UFFD_API_FEATURES (0) +#define UFFD_API ((__u64)0xAA) +#define UFFD_API_FEATURES (UFFD_FEATURE_EVENT_FORK | \ + UFFD_FEATURE_EVENT_REMAP | \ + UFFD_FEATURE_EVENT_MADVDONTNEED | \ + UFFD_FEATURE_MISSING_HUGETLBFS | \ + UFFD_FEATURE_MISSING_SHMEM) #define UFFD_API_IOCTLS \ ((__u64)1 << _UFFDIO_REGISTER | \ (__u64)1 << _UFFDIO_UNREGISTER | \ @@ -XXX,XX +XXX,XX @@ ((__u64)1 << _UFFDIO_WAKE | \ (__u64)1 << _UFFDIO_COPY | \ (__u64)1 << _UFFDIO_ZEROPAGE) +#define UFFD_API_RANGE_IOCTLS_BASIC \ + ((__u64)1 << _UFFDIO_WAKE | \ + (__u64)1 << _UFFDIO_COPY) /* * Valid ioctl command number range with this API is from 0x00 to @@ -XXX,XX +XXX,XX @@ struct uffd_msg { } pagefault; struct { + __u32 ufd; + } fork; + + struct { + __u64 from; + __u64 to; + __u64 len; + } remap; + + struct { + __u64 start; + __u64 end; + } madv_dn; + + struct { /* unused reserved fields */ __u64 reserved1; __u64 reserved2; @@ -XXX,XX +XXX,XX @@ struct uffd_msg { * Start at 0x12 and not at 0 to be more strict against bugs. */ #define UFFD_EVENT_PAGEFAULT 0x12 -#if 0 /* not available yet */ #define UFFD_EVENT_FORK 0x13 -#endif +#define UFFD_EVENT_REMAP 0x14 +#define UFFD_EVENT_MADVDONTNEED 0x15 /* flags for UFFD_EVENT_PAGEFAULT */ #define UFFD_PAGEFAULT_FLAG_WRITE (1<<0) /* If this was a write fault */ @@ -XXX,XX +XXX,XX @@ struct uffdio_api { * Note: UFFD_EVENT_PAGEFAULT and UFFD_PAGEFAULT_FLAG_WRITE * are to be considered implicitly always enabled in all kernels as * long as the uffdio_api.api requested matches UFFD_API. + * + * UFFD_FEATURE_MISSING_HUGETLBFS means an UFFDIO_REGISTER + * with UFFDIO_REGISTER_MODE_MISSING mode will succeed on + * hugetlbfs virtual memory ranges. Adding or not adding + * UFFD_FEATURE_MISSING_HUGETLBFS to uffdio_api.features has + * no real functional effect after UFFDIO_API returns, but + * it's only useful for an initial feature set probe at + * UFFDIO_API time. There are two ways to use it: + * + * 1) by adding UFFD_FEATURE_MISSING_HUGETLBFS to the + * uffdio_api.features before calling UFFDIO_API, an error + * will be returned by UFFDIO_API on a kernel without + * hugetlbfs missing support + * + * 2) the UFFD_FEATURE_MISSING_HUGETLBFS can not be added in + * uffdio_api.features and instead it will be set by the + * kernel in the uffdio_api.features if the kernel supports + * it, so userland can later check if the feature flag is + * present in uffdio_api.features after UFFDIO_API + * succeeded. + * + * UFFD_FEATURE_MISSING_SHMEM works the same as + * UFFD_FEATURE_MISSING_HUGETLBFS, but it applies to shmem + * (i.e. tmpfs and other shmem based APIs). */ -#if 0 /* not available yet */ #define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0) #define UFFD_FEATURE_EVENT_FORK (1<<1) -#endif +#define UFFD_FEATURE_EVENT_REMAP (1<<2) +#define UFFD_FEATURE_EVENT_MADVDONTNEED (1<<3) +#define UFFD_FEATURE_MISSING_HUGETLBFS (1<<4) +#define UFFD_FEATURE_MISSING_SHMEM (1<<5) __u64 features; __u64 ioctls; diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/vfio.h +++ b/linux-headers/linux/vfio.h @@ -XXX,XX +XXX,XX @@ struct vfio_device_info { }; #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) +/* + * Vendor driver using Mediated device framework should provide device_api + * attribute in supported type attribute groups. Device API string should be one + * of the following corresponding to device flags in vfio_device_info structure. + */ + +#define VFIO_DEVICE_API_PCI_STRING "vfio-pci" +#define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform" +#define VFIO_DEVICE_API_AMBA_STRING "vfio-amba" + /** * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, * struct vfio_region_info) -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> To Save and Restore ICC_SRE_EL1 register introduce vmstate subsection and load only if non-zero. Also initialize icc_sre_el1 with to 0x7 in pre_load function. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-3-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gicv3_common.h | 1 + hw/intc/arm_gicv3_common.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { uint8_t gicr_ipriorityr[GIC_INTERNAL]; /* CPU interface */ + uint64_t icc_sre_el1; uint64_t icc_ctlr_el1[2]; uint64_t icc_pmr_el1; uint64_t icc_bpr[3]; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu_virt = { } }; +static int icc_sre_el1_reg_pre_load(void *opaque) +{ + GICv3CPUState *cs = opaque; + + /* + * If the sre_el1 subsection is not transferred this + * means SRE_EL1 is 0x7 (which might not be the same as + * our reset value). + */ + cs->icc_sre_el1 = 0x7; + return 0; +} + +static bool icc_sre_el1_reg_needed(void *opaque) +{ + GICv3CPUState *cs = opaque; + + return cs->icc_sre_el1 != 7; +} + +const VMStateDescription vmstate_gicv3_cpu_sre_el1 = { + .name = "arm_gicv3_cpu/sre_el1", + .version_id = 1, + .minimum_version_id = 1, + .pre_load = icc_sre_el1_reg_pre_load, + .needed = icc_sre_el1_reg_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT64(icc_sre_el1, GICv3CPUState), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3_cpu = { .name = "arm_gicv3_cpu", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu = { .subsections = (const VMStateDescription * []) { &vmstate_gicv3_cpu_virt, NULL + }, + .subsections = (const VMStateDescription * []) { + &vmstate_gicv3_cpu_sre_el1, + NULL } }; -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> This actually implements pre_save and post_load methods for in-kernel vGICv3. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Message-id: 1487850673-26455-4-git-send-email-vijay.kilari@gmail.com [PMM: * use decimal, not 0bnnn * fixed typo in names of ICC_APR0R_EL1 and ICC_AP1R_EL1 * completely rearranged the get and put functions to read and write the state in a natural order, rather than mixing distributor and redistributor state together] Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> [Vijay: * Update macro KVM_VGIC_ATTR * Use 32 bit access for gicd and gicr * GICD_IROUTER, GICD_TYPER, GICR_PROPBASER and GICR_PENDBASER reg access are changed from 64-bit to 32-bit access * Add ICC_SRE_EL1 save and restore * Dropped translate_fn mechanism and coded functions to handle save and restore of edge_trigger and priority * Number of APnR register saved/restored based on number of priority bits supported] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 1 + hw/intc/arm_gicv3_kvm.c | 573 +++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 558 insertions(+), 16 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define ICC_CTLR_EL1_EOIMODE (1U << 1) #define ICC_CTLR_EL1_PMHE (1U << 6) #define ICC_CTLR_EL1_PRIBITS_SHIFT 8 +#define ICC_CTLR_EL1_PRIBITS_MASK (7U << ICC_CTLR_EL1_PRIBITS_SHIFT) #define ICC_CTLR_EL1_IDBITS_SHIFT 11 #define ICC_CTLR_EL1_SEIS (1U << 14) #define ICC_CTLR_EL1_A3V (1U << 15) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/intc/arm_gicv3_common.h" #include "hw/sysbus.h" +#include "qemu/error-report.h" #include "sysemu/kvm.h" #include "kvm_arm.h" +#include "gicv3_internal.h" #include "vgic_common.h" #include "migration/migration.h" @@ -XXX,XX +XXX,XX @@ #define KVM_ARM_GICV3_GET_CLASS(obj) \ OBJECT_GET_CLASS(KVMARMGICv3Class, (obj), TYPE_KVM_ARM_GICV3) +#define KVM_DEV_ARM_VGIC_SYSREG(op0, op1, crn, crm, op2) \ + (ARM64_SYS_REG_SHIFT_MASK(op0, OP0) | \ + ARM64_SYS_REG_SHIFT_MASK(op1, OP1) | \ + ARM64_SYS_REG_SHIFT_MASK(crn, CRN) | \ + ARM64_SYS_REG_SHIFT_MASK(crm, CRM) | \ + ARM64_SYS_REG_SHIFT_MASK(op2, OP2)) + +#define ICC_PMR_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 4, 6, 0) +#define ICC_BPR0_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 8, 3) +#define ICC_AP0R_EL1(n) \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 8, 4 | n) +#define ICC_AP1R_EL1(n) \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 9, n) +#define ICC_BPR1_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 3) +#define ICC_CTLR_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 4) +#define ICC_SRE_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 5) +#define ICC_IGRPEN0_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 6) +#define ICC_IGRPEN1_EL1 \ + KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 7) + typedef struct KVMARMGICv3Class { ARMGICv3CommonClass parent_class; DeviceRealize parent_realize; @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_set_irq(void *opaque, int irq, int level) kvm_arm_gic_set_irq(s->num_irq, irq, level); } +#define KVM_VGIC_ATTR(reg, typer) \ + ((typer & KVM_DEV_ARM_VGIC_V3_MPIDR_MASK) | (reg)) + +static inline void kvm_gicd_access(GICv3State *s, int offset, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, + KVM_VGIC_ATTR(offset, 0), + val, write); +} + +static inline void kvm_gicr_access(GICv3State *s, int offset, int cpu, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS, + KVM_VGIC_ATTR(offset, s->cpu[cpu].gicr_typer), + val, write); +} + +static inline void kvm_gicc_access(GICv3State *s, uint64_t reg, int cpu, + uint64_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, + KVM_VGIC_ATTR(reg, s->cpu[cpu].gicr_typer), + val, write); +} + +static inline void kvm_gic_line_level_access(GICv3State *s, int irq, int cpu, + uint32_t *val, bool write) +{ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO, + KVM_VGIC_ATTR(irq, s->cpu[cpu].gicr_typer) | + (VGIC_LEVEL_INFO_LINE_LEVEL << + KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT), + val, write); +} + +/* Loop through each distributor IRQ related register; since bits + * corresponding to SPIs and PPIs are RAZ/WI when affinity routing + * is enabled, we skip those. + */ +#define for_each_dist_irq_reg(_irq, _max, _field_width) \ + for (_irq = GIC_INTERNAL; _irq < _max; _irq += (32 / _field_width)) + +static void kvm_dist_get_priority(GICv3State *s, uint32_t offset, uint8_t *bmp) +{ + uint32_t reg, *field; + int irq; + + field = (uint32_t *)bmp; + for_each_dist_irq_reg(irq, s->num_irq, 8) { + kvm_gicd_access(s, offset, &reg, false); + *field = reg; + offset += 4; + field++; + } +} + +static void kvm_dist_put_priority(GICv3State *s, uint32_t offset, uint8_t *bmp) +{ + uint32_t reg, *field; + int irq; + + field = (uint32_t *)bmp; + for_each_dist_irq_reg(irq, s->num_irq, 8) { + reg = *field; + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + field++; + } +} + +static void kvm_dist_get_edge_trigger(GICv3State *s, uint32_t offset, + uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 2) { + kvm_gicd_access(s, offset, &reg, false); + reg = half_unshuffle32(reg >> 1); + if (irq % 32 != 0) { + reg = (reg << 16); + } + *gic_bmp_ptr32(bmp, irq) |= reg; + offset += 4; + } +} + +static void kvm_dist_put_edge_trigger(GICv3State *s, uint32_t offset, + uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 2) { + reg = *gic_bmp_ptr32(bmp, irq); + if (irq % 32 != 0) { + reg = (reg & 0xffff0000) >> 16; + } else { + reg = reg & 0xffff; + } + reg = half_shuffle32(reg) << 1; + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + } +} + +static void kvm_gic_get_line_level_bmp(GICv3State *s, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + kvm_gic_line_level_access(s, irq, 0, &reg, false); + *gic_bmp_ptr32(bmp, irq) = reg; + } +} + +static void kvm_gic_put_line_level_bmp(GICv3State *s, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + reg = *gic_bmp_ptr32(bmp, irq); + kvm_gic_line_level_access(s, irq, 0, &reg, true); + } +} + +/* Read a bitmap register group from the kernel VGIC. */ +static void kvm_dist_getbmp(GICv3State *s, uint32_t offset, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + kvm_gicd_access(s, offset, &reg, false); + *gic_bmp_ptr32(bmp, irq) = reg; + offset += 4; + } +} + +static void kvm_dist_putbmp(GICv3State *s, uint32_t offset, + uint32_t clroffset, uint32_t *bmp) +{ + uint32_t reg; + int irq; + + for_each_dist_irq_reg(irq, s->num_irq, 1) { + /* If this bitmap is a set/clear register pair, first write to the + * clear-reg to clear all bits before using the set-reg to write + * the 1 bits. + */ + if (clroffset != 0) { + reg = 0; + kvm_gicd_access(s, clroffset, &reg, true); + } + reg = *gic_bmp_ptr32(bmp, irq); + kvm_gicd_access(s, offset, &reg, true); + offset += 4; + } +} + +static void kvm_arm_gicv3_check(GICv3State *s) +{ + uint32_t reg; + uint32_t num_irq; + + /* Sanity checking s->num_irq */ + kvm_gicd_access(s, GICD_TYPER, &reg, false); + num_irq = ((reg & 0x1f) + 1) * 32; + + if (num_irq < s->num_irq) { + error_report("Model requests %u IRQs, but kernel supports max %u", + s->num_irq, num_irq); + abort(); + } +} + static void kvm_arm_gicv3_put(GICv3State *s) { - /* TODO */ - DPRINTF("Cannot put kernel gic state, no kernel interface\n"); + uint32_t regl, regh, reg; + uint64_t reg64, redist_typer; + int ncpu, i; + + kvm_arm_gicv3_check(s); + + kvm_gicr_access(s, GICR_TYPER, 0, &regl, false); + kvm_gicr_access(s, GICR_TYPER + 4, 0, &regh, false); + redist_typer = ((uint64_t)regh << 32) | regl; + + reg = s->gicd_ctlr; + kvm_gicd_access(s, GICD_CTLR, &reg, true); + + if (redist_typer & GICR_TYPER_PLPIS) { + /* Set base addresses before LPIs are enabled by GICR_CTLR write */ + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + reg64 = c->gicr_propbaser; + regl = (uint32_t)reg64; + kvm_gicr_access(s, GICR_PROPBASER, ncpu, &regl, true); + regh = (uint32_t)(reg64 >> 32); + kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, true); + + reg64 = c->gicr_pendbaser; + if (!c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) { + /* Setting PTZ is advised if LPIs are disabled, to reduce + * GIC initialization time. + */ + reg64 |= GICR_PENDBASER_PTZ; + } + regl = (uint32_t)reg64; + kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, true); + regh = (uint32_t)(reg64 >> 32); + kvm_gicr_access(s, GICR_PENDBASER + 4, ncpu, &regh, true); + } + } + + /* Redistributor state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + reg = c->gicr_ctlr; + kvm_gicr_access(s, GICR_CTLR, ncpu, &reg, true); + + reg = c->gicr_statusr[GICV3_NS]; + kvm_gicr_access(s, GICR_STATUSR, ncpu, &reg, true); + + reg = c->gicr_waker; + kvm_gicr_access(s, GICR_WAKER, ncpu, &reg, true); + + reg = c->gicr_igroupr0; + kvm_gicr_access(s, GICR_IGROUPR0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICENABLER0, ncpu, &reg, true); + reg = c->gicr_ienabler0; + kvm_gicr_access(s, GICR_ISENABLER0, ncpu, &reg, true); + + /* Restore config before pending so we treat level/edge correctly */ + reg = half_shuffle32(c->edge_trigger >> 16) << 1; + kvm_gicr_access(s, GICR_ICFGR1, ncpu, &reg, true); + + reg = c->level; + kvm_gic_line_level_access(s, 0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICPENDR0, ncpu, &reg, true); + reg = c->gicr_ipendr0; + kvm_gicr_access(s, GICR_ISPENDR0, ncpu, &reg, true); + + reg = ~0; + kvm_gicr_access(s, GICR_ICACTIVER0, ncpu, &reg, true); + reg = c->gicr_iactiver0; + kvm_gicr_access(s, GICR_ISACTIVER0, ncpu, &reg, true); + + for (i = 0; i < GIC_INTERNAL; i += 4) { + reg = c->gicr_ipriorityr[i] | + (c->gicr_ipriorityr[i + 1] << 8) | + (c->gicr_ipriorityr[i + 2] << 16) | + (c->gicr_ipriorityr[i + 3] << 24); + kvm_gicr_access(s, GICR_IPRIORITYR + i, ncpu, &reg, true); + } + } + + /* Distributor state (shared between all CPUs */ + reg = s->gicd_statusr[GICV3_NS]; + kvm_gicd_access(s, GICD_STATUSR, &reg, true); + + /* s->enable bitmap -> GICD_ISENABLERn */ + kvm_dist_putbmp(s, GICD_ISENABLER, GICD_ICENABLER, s->enabled); + + /* s->group bitmap -> GICD_IGROUPRn */ + kvm_dist_putbmp(s, GICD_IGROUPR, 0, s->group); + + /* Restore targets before pending to ensure the pending state is set on + * the appropriate CPU interfaces in the kernel + */ + + /* s->gicd_irouter[irq] -> GICD_IROUTERn + * We can't use kvm_dist_put() here because the registers are 64-bit + */ + for (i = GIC_INTERNAL; i < s->num_irq; i++) { + uint32_t offset; + + offset = GICD_IROUTER + (sizeof(uint32_t) * i); + reg = (uint32_t)s->gicd_irouter[i]; + kvm_gicd_access(s, offset, &reg, true); + + offset = GICD_IROUTER + (sizeof(uint32_t) * i) + 4; + reg = (uint32_t)(s->gicd_irouter[i] >> 32); + kvm_gicd_access(s, offset, &reg, true); + } + + /* s->trigger bitmap -> GICD_ICFGRn + * (restore configuration registers before pending IRQs so we treat + * level/edge correctly) + */ + kvm_dist_put_edge_trigger(s, GICD_ICFGR, s->edge_trigger); + + /* s->level bitmap -> line_level */ + kvm_gic_put_line_level_bmp(s, s->level); + + /* s->pending bitmap -> GICD_ISPENDRn */ + kvm_dist_putbmp(s, GICD_ISPENDR, GICD_ICPENDR, s->pending); + + /* s->active bitmap -> GICD_ISACTIVERn */ + kvm_dist_putbmp(s, GICD_ISACTIVER, GICD_ICACTIVER, s->active); + + /* s->gicd_ipriority[] -> GICD_IPRIORITYRn */ + kvm_dist_put_priority(s, GICD_IPRIORITYR, s->gicd_ipriority); + + /* CPU Interface state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + int num_pri_bits; + + kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, true); + kvm_gicc_access(s, ICC_CTLR_EL1, ncpu, + &c->icc_ctlr_el1[GICV3_NS], true); + kvm_gicc_access(s, ICC_IGRPEN0_EL1, ncpu, + &c->icc_igrpen[GICV3_G0], true); + kvm_gicc_access(s, ICC_IGRPEN1_EL1, ncpu, + &c->icc_igrpen[GICV3_G1NS], true); + kvm_gicc_access(s, ICC_PMR_EL1, ncpu, &c->icc_pmr_el1, true); + kvm_gicc_access(s, ICC_BPR0_EL1, ncpu, &c->icc_bpr[GICV3_G0], true); + kvm_gicc_access(s, ICC_BPR1_EL1, ncpu, &c->icc_bpr[GICV3_G1NS], true); + + num_pri_bits = ((c->icc_ctlr_el1[GICV3_NS] & + ICC_CTLR_EL1_PRIBITS_MASK) >> + ICC_CTLR_EL1_PRIBITS_SHIFT) + 1; + + switch (num_pri_bits) { + case 7: + reg64 = c->icc_apr[GICV3_G0][3]; + kvm_gicc_access(s, ICC_AP0R_EL1(3), ncpu, &reg64, true); + reg64 = c->icc_apr[GICV3_G0][2]; + kvm_gicc_access(s, ICC_AP0R_EL1(2), ncpu, &reg64, true); + case 6: + reg64 = c->icc_apr[GICV3_G0][1]; + kvm_gicc_access(s, ICC_AP0R_EL1(1), ncpu, &reg64, true); + default: + reg64 = c->icc_apr[GICV3_G0][0]; + kvm_gicc_access(s, ICC_AP0R_EL1(0), ncpu, &reg64, true); + } + + switch (num_pri_bits) { + case 7: + reg64 = c->icc_apr[GICV3_G1NS][3]; + kvm_gicc_access(s, ICC_AP1R_EL1(3), ncpu, &reg64, true); + reg64 = c->icc_apr[GICV3_G1NS][2]; + kvm_gicc_access(s, ICC_AP1R_EL1(2), ncpu, &reg64, true); + case 6: + reg64 = c->icc_apr[GICV3_G1NS][1]; + kvm_gicc_access(s, ICC_AP1R_EL1(1), ncpu, &reg64, true); + default: + reg64 = c->icc_apr[GICV3_G1NS][0]; + kvm_gicc_access(s, ICC_AP1R_EL1(0), ncpu, &reg64, true); + } + } } static void kvm_arm_gicv3_get(GICv3State *s) { - /* TODO */ - DPRINTF("Cannot get kernel gic state, no kernel interface\n"); + uint32_t regl, regh, reg; + uint64_t reg64, redist_typer; + int ncpu, i; + + kvm_arm_gicv3_check(s); + + kvm_gicr_access(s, GICR_TYPER, 0, &regl, false); + kvm_gicr_access(s, GICR_TYPER + 4, 0, &regh, false); + redist_typer = ((uint64_t)regh << 32) | regl; + + kvm_gicd_access(s, GICD_CTLR, &reg, false); + s->gicd_ctlr = reg; + + /* Redistributor state (one per CPU) */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + kvm_gicr_access(s, GICR_CTLR, ncpu, &reg, false); + c->gicr_ctlr = reg; + + kvm_gicr_access(s, GICR_STATUSR, ncpu, &reg, false); + c->gicr_statusr[GICV3_NS] = reg; + + kvm_gicr_access(s, GICR_WAKER, ncpu, &reg, false); + c->gicr_waker = reg; + + kvm_gicr_access(s, GICR_IGROUPR0, ncpu, &reg, false); + c->gicr_igroupr0 = reg; + kvm_gicr_access(s, GICR_ISENABLER0, ncpu, &reg, false); + c->gicr_ienabler0 = reg; + kvm_gicr_access(s, GICR_ICFGR1, ncpu, &reg, false); + c->edge_trigger = half_unshuffle32(reg >> 1) << 16; + kvm_gic_line_level_access(s, 0, ncpu, &reg, false); + c->level = reg; + kvm_gicr_access(s, GICR_ISPENDR0, ncpu, &reg, false); + c->gicr_ipendr0 = reg; + kvm_gicr_access(s, GICR_ISACTIVER0, ncpu, &reg, false); + c->gicr_iactiver0 = reg; + + for (i = 0; i < GIC_INTERNAL; i += 4) { + kvm_gicr_access(s, GICR_IPRIORITYR + i, ncpu, &reg, false); + c->gicr_ipriorityr[i] = extract32(reg, 0, 8); + c->gicr_ipriorityr[i + 1] = extract32(reg, 8, 8); + c->gicr_ipriorityr[i + 2] = extract32(reg, 16, 8); + c->gicr_ipriorityr[i + 3] = extract32(reg, 24, 8); + } + } + + if (redist_typer & GICR_TYPER_PLPIS) { + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + + kvm_gicr_access(s, GICR_PROPBASER, ncpu, &regl, false); + kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, false); + c->gicr_propbaser = ((uint64_t)regh << 32) | regl; + + kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, false); + kvm_gicr_access(s, GICR_PENDBASER + 4, ncpu, &regh, false); + c->gicr_pendbaser = ((uint64_t)regh << 32) | regl; + } + } + + /* Distributor state (shared between all CPUs */ + + kvm_gicd_access(s, GICD_STATUSR, &reg, false); + s->gicd_statusr[GICV3_NS] = reg; + + /* GICD_IGROUPRn -> s->group bitmap */ + kvm_dist_getbmp(s, GICD_IGROUPR, s->group); + + /* GICD_ISENABLERn -> s->enabled bitmap */ + kvm_dist_getbmp(s, GICD_ISENABLER, s->enabled); + + /* Line level of irq */ + kvm_gic_get_line_level_bmp(s, s->level); + /* GICD_ISPENDRn -> s->pending bitmap */ + kvm_dist_getbmp(s, GICD_ISPENDR, s->pending); + + /* GICD_ISACTIVERn -> s->active bitmap */ + kvm_dist_getbmp(s, GICD_ISACTIVER, s->active); + + /* GICD_ICFGRn -> s->trigger bitmap */ + kvm_dist_get_edge_trigger(s, GICD_ICFGR, s->edge_trigger); + + /* GICD_IPRIORITYRn -> s->gicd_ipriority[] */ + kvm_dist_get_priority(s, GICD_IPRIORITYR, s->gicd_ipriority); + + /* GICD_IROUTERn -> s->gicd_irouter[irq] */ + for (i = GIC_INTERNAL; i < s->num_irq; i++) { + uint32_t offset; + + offset = GICD_IROUTER + (sizeof(uint32_t) * i); + kvm_gicd_access(s, offset, &regl, false); + offset = GICD_IROUTER + (sizeof(uint32_t) * i) + 4; + kvm_gicd_access(s, offset, &regh, false); + s->gicd_irouter[i] = ((uint64_t)regh << 32) | regl; + } + + /***************************************************************** + * CPU Interface(s) State + */ + + for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { + GICv3CPUState *c = &s->cpu[ncpu]; + int num_pri_bits; + + kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, false); + kvm_gicc_access(s, ICC_CTLR_EL1, ncpu, + &c->icc_ctlr_el1[GICV3_NS], false); + kvm_gicc_access(s, ICC_IGRPEN0_EL1, ncpu, + &c->icc_igrpen[GICV3_G0], false); + kvm_gicc_access(s, ICC_IGRPEN1_EL1, ncpu, + &c->icc_igrpen[GICV3_G1NS], false); + kvm_gicc_access(s, ICC_PMR_EL1, ncpu, &c->icc_pmr_el1, false); + kvm_gicc_access(s, ICC_BPR0_EL1, ncpu, &c->icc_bpr[GICV3_G0], false); + kvm_gicc_access(s, ICC_BPR1_EL1, ncpu, &c->icc_bpr[GICV3_G1NS], false); + num_pri_bits = ((c->icc_ctlr_el1[GICV3_NS] & + ICC_CTLR_EL1_PRIBITS_MASK) >> + ICC_CTLR_EL1_PRIBITS_SHIFT) + 1; + + switch (num_pri_bits) { + case 7: + kvm_gicc_access(s, ICC_AP0R_EL1(3), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][3] = reg64; + kvm_gicc_access(s, ICC_AP0R_EL1(2), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][2] = reg64; + case 6: + kvm_gicc_access(s, ICC_AP0R_EL1(1), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][1] = reg64; + default: + kvm_gicc_access(s, ICC_AP0R_EL1(0), ncpu, &reg64, false); + c->icc_apr[GICV3_G0][0] = reg64; + } + + switch (num_pri_bits) { + case 7: + kvm_gicc_access(s, ICC_AP1R_EL1(3), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][3] = reg64; + kvm_gicc_access(s, ICC_AP1R_EL1(2), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][2] = reg64; + case 6: + kvm_gicc_access(s, ICC_AP1R_EL1(1), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][1] = reg64; + default: + kvm_gicc_access(s, ICC_AP1R_EL1(0), ncpu, &reg64, false); + c->icc_apr[GICV3_G1NS][0] = reg64; + } + } } static void kvm_arm_gicv3_reset(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset(DeviceState *dev) DPRINTF("Reset\n"); kgc->parent_reset(dev); + + if (s->migration_blocker) { + DPRINTF("Cannot put kernel gic state, no kernel interface\n"); + return; + } + kvm_arm_gicv3_put(s); } @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); - /* Block migration of a KVM GICv3 device: the API for saving and restoring - * the state in the kernel is not yet finalised in the kernel or - * implemented in QEMU. - */ - error_setg(&s->migration_blocker, "vGICv3 migration is not implemented"); - migrate_add_blocker(s->migration_blocker, &local_err); - if (local_err) { - error_propagate(errp, local_err); - error_free(s->migration_blocker); - return; - } - /* Try to create the device via the device control API */ s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, false); if (s->dev_fd < 0) { @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) kvm_irqchip_commit_routes(kvm_state); } + + if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, + GICD_CTLR)) { + error_setg(&s->migration_blocker, "This operating system kernel does " + "not support vGICv3 migration"); + migrate_add_blocker(s->migration_blocker, &local_err); + if (local_err) { + error_propagate(errp, local_err); + error_free(s->migration_blocker); + return; + } + } } static void kvm_arm_gicv3_class_init(ObjectClass *klass, void *data) -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Add gicv3state void pointer to CPUARMState struct to store GICv3CPUState. In case of usecase like CPU reset, we need to reset GICv3CPUState of the CPU. In such scenario, this pointer becomes handy. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-5-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 2 ++ target/arm/cpu.h | 2 ++ hw/intc/arm_gicv3_common.c | 2 ++ hw/intc/arm_gicv3_cpuif.c | 8 ++++++++ 4 files changed, 14 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ static inline void gicv3_cache_all_target_cpustates(GICv3State *s) } } +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s); + #endif /* QEMU_ARM_GICV3_INTERNAL_H */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { void *nvic; const struct arm_boot_info *boot_info; + /* Store GICv3CPUState to access from this struct */ + void *gicv3state; } CPUARMState; /** diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp) s->cpu[i].cpu = cpu; s->cpu[i].gic = s; + /* Store GICv3CPUState in CPUARMState gicv3state pointer */ + gicv3_set_gicv3state(cpu, &s->cpu[i]); /* Pre-construct the GICR_TYPER: * For our implementation: diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ #include "gicv3_internal.h" #include "cpu.h" +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + env->gicv3state = (void *)s; +}; + static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { /* Given the CPU, find the right GICv3CPUState struct. -- 2.7.4 From: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reset CPU interface registers of GICv3 when CPU is reset. For this, ARMCPRegInfo struct is registered with one ICC register whose resetfn is called when cpu is reset. All the ICC registers are reset under one single register reset function instead of calling resetfn for each ICC register. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487850673-26455-6-git-send-email-vijay.kilari@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_get(GICv3State *s) } } +static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu; + GICv3State *s; + GICv3CPUState *c; + + c = (GICv3CPUState *)env->gicv3state; + s = c->gic; + cpu = ARM_CPU(c->cpu); + + /* Initialize to actual HW supported configuration */ + kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, + KVM_VGIC_ATTR(ICC_CTLR_EL1, cpu->mp_affinity), + &c->icc_ctlr_el1[GICV3_NS], false); + + c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS]; + c->icc_pmr_el1 = 0; + c->icc_bpr[GICV3_G0] = GIC_MIN_BPR; + c->icc_bpr[GICV3_G1] = GIC_MIN_BPR; + c->icc_bpr[GICV3_G1NS] = GIC_MIN_BPR; + + c->icc_sre_el1 = 0x7; + memset(c->icc_apr, 0, sizeof(c->icc_apr)); + memset(c->icc_igrpen, 0, sizeof(c->icc_igrpen)); +} + static void kvm_arm_gicv3_reset(DeviceState *dev) { GICv3State *s = ARM_GICV3_COMMON(dev); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset(DeviceState *dev) kvm_arm_gicv3_put(s); } +/* + * CPU interface registers of GIC needs to be reset on CPU reset. + * For the calling arm_gicv3_icc_reset() on CPU reset, we register + * below ARMCPRegInfo. As we reset the whole cpu interface under single + * register reset, we define only one register of CPU interface instead + * of defining all the registers. + */ +static const ARMCPRegInfo gicv3_cpuif_reginfo[] = { + { .name = "ICC_CTLR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 4, + /* + * If ARM_CP_NOP is used, resetfn is not called, + * So ARM_CP_NO_RAW is appropriate type. + */ + .type = ARM_CP_NO_RAW, + .access = PL1_RW, + .readfn = arm_cp_read_zero, + .writefn = arm_cp_write_ignore, + /* + * We hang the whole cpu interface reset routine off here + * rather than parcelling it out into one little function + * per register + */ + .resetfn = arm_gicv3_icc_reset, + }, + REGINFO_SENTINEL +}; + static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) { GICv3State *s = KVM_ARM_GICV3(dev); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); + for (i = 0; i < s->num_cpu; i++) { + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i)); + + define_arm_cp_regs(cpu, gicv3_cpuif_reginfo); + } + /* Try to create the device via the device control API */ s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, false); if (s->dev_fd < 0) { -- 2.7.4 Instead of qdev_set_parent_bus() silently doing the wrong thing if it's handed a device that's already on a bus, have it remove the device from the old bus and add it to the new one. This is useful for the raspi2 sdcard. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1488293711-14195-2-git-send-email-peter.maydell@linaro.org --- hw/core/qdev.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void bus_add_child(BusState *bus, DeviceState *child) void qdev_set_parent_bus(DeviceState *dev, BusState *bus) { + bool replugging = dev->parent_bus != NULL; + + if (replugging) { + /* Keep a reference to the device while it's not plugged into + * any bus, to avoid it potentially evaporating when it is + * dereffed in bus_remove_child(). + */ + object_ref(OBJECT(dev)); + bus_remove_child(dev->parent_bus, dev); + object_unref(OBJECT(dev->parent_bus)); + } dev->parent_bus = bus; object_ref(OBJECT(bus)); bus_add_child(bus, dev); + if (replugging) { + object_unref(OBJECT(dev)); + } } /* Create a new device. This only initializes the device state -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> Provide a new function sdbus_reparent_card() in sd core for reparenting a card from a SDBus to another one. This function is required by the raspi platform, where the two SD controllers can be dynamically switched. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-3-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-3-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added a doc comment to the header file; changed to use new behaviour of qdev_set_parent_bus()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sd.h | 11 +++++++++++ hw/sd/core.c | 27 +++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sd.h +++ b/include/hw/sd/sd.h @@ -XXX,XX +XXX,XX @@ uint8_t sdbus_read_data(SDBus *sd); bool sdbus_data_ready(SDBus *sd); bool sdbus_get_inserted(SDBus *sd); bool sdbus_get_readonly(SDBus *sd); +/** + * sdbus_reparent_card: Reparent an SD card from one controller to another + * @from: controller bus to remove card from + * @to: controller bus to move card to + * + * Reparent an SD card, effectively unplugging it from one controller + * and inserting it into another. This is useful for SoCs like the + * bcm2835 which have two SD controllers and connect a single SD card + * to them, selected by the guest reprogramming GPIO line routing. + */ +void sdbus_reparent_card(SDBus *from, SDBus *to); /* Functions to be used by SD devices to report back to qdevified controllers */ void sdbus_set_inserted(SDBus *sd, bool inserted); diff --git a/hw/sd/core.c b/hw/sd/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/core.c +++ b/hw/sd/core.c @@ -XXX,XX +XXX,XX @@ void sdbus_set_readonly(SDBus *sdbus, bool readonly) } } +void sdbus_reparent_card(SDBus *from, SDBus *to) +{ + SDState *card = get_card(from); + SDCardClass *sc; + bool readonly; + + /* We directly reparent the card object rather than implementing this + * as a hotpluggable connection because we don't want to expose SD cards + * to users as being hotpluggable, and we can get away with it in this + * limited use case. This could perhaps be implemented more cleanly in + * future by adding support to the hotplug infrastructure for "device + * can be hotplugged only via code, not by user". + */ + + if (!card) { + return; + } + + sc = SD_CARD_GET_CLASS(card); + readonly = sc->get_readonly(card); + + sdbus_set_inserted(from, false); + qdev_set_parent_bus(DEVICE(card), &to->qbus); + sdbus_set_inserted(to, true); + sdbus_set_readonly(to, readonly); +} + static const TypeInfo sd_bus_info = { .name = TYPE_SD_BUS, .parent = TYPE_BUS, -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> This adds the BCM2835 GPIO controller. It currently implements: - The 54 GPIOs as outputs (qemu_irq) - The SD controller selection via alternate function of GPIOs 48-53 Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-4-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-4-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/Makefile.objs | 1 + include/hw/gpio/bcm2835_gpio.h | 39 +++++ hw/gpio/bcm2835_gpio.c | 353 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 393 insertions(+) create mode 100644 include/hw/gpio/bcm2835_gpio.h create mode 100644 hw/gpio/bcm2835_gpio.c diff --git a/hw/gpio/Makefile.objs b/hw/gpio/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Makefile.objs +++ b/hw/gpio/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_GPIO_KEY) += gpio_key.o obj-$(CONFIG_OMAP) += omap_gpio.o obj-$(CONFIG_IMX) += imx_gpio.o +obj-$(CONFIG_RASPI) += bcm2835_gpio.o diff --git a/include/hw/gpio/bcm2835_gpio.h b/include/hw/gpio/bcm2835_gpio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/gpio/bcm2835_gpio.h @@ -XXX,XX +XXX,XX @@ +/* + * Raspberry Pi (BCM2835) GPIO Controller + * + * Copyright (c) 2017 Antfield SAS + * + * Authors: + * Clement Deschamps <clement.deschamps@antfield.fr> + * Luc Michel <luc.michel@antfield.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef BCM2835_GPIO_H +#define BCM2835_GPIO_H + +#include "hw/sd/sd.h" + +typedef struct BCM2835GpioState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + /* SDBus selector */ + SDBus sdbus; + SDBus *sdbus_sdhci; + SDBus *sdbus_sdhost; + + uint8_t fsel[54]; + uint32_t lev0, lev1; + uint8_t sd_fsel; + qemu_irq out[54]; +} BCM2835GpioState; + +#define TYPE_BCM2835_GPIO "bcm2835_gpio" +#define BCM2835_GPIO(obj) \ + OBJECT_CHECK(BCM2835GpioState, (obj), TYPE_BCM2835_GPIO) + +#endif diff --git a/hw/gpio/bcm2835_gpio.c b/hw/gpio/bcm2835_gpio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/bcm2835_gpio.c @@ -XXX,XX +XXX,XX @@ +/* + * Raspberry Pi (BCM2835) GPIO Controller + * + * Copyright (c) 2017 Antfield SAS + * + * Authors: + * Clement Deschamps <clement.deschamps@antfield.fr> + * Luc Michel <luc.michel@antfield.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/timer.h" +#include "qapi/error.h" +#include "hw/sysbus.h" +#include "hw/sd/sd.h" +#include "hw/gpio/bcm2835_gpio.h" + +#define GPFSEL0 0x00 +#define GPFSEL1 0x04 +#define GPFSEL2 0x08 +#define GPFSEL3 0x0C +#define GPFSEL4 0x10 +#define GPFSEL5 0x14 +#define GPSET0 0x1C +#define GPSET1 0x20 +#define GPCLR0 0x28 +#define GPCLR1 0x2C +#define GPLEV0 0x34 +#define GPLEV1 0x38 +#define GPEDS0 0x40 +#define GPEDS1 0x44 +#define GPREN0 0x4C +#define GPREN1 0x50 +#define GPFEN0 0x58 +#define GPFEN1 0x5C +#define GPHEN0 0x64 +#define GPHEN1 0x68 +#define GPLEN0 0x70 +#define GPLEN1 0x74 +#define GPAREN0 0x7C +#define GPAREN1 0x80 +#define GPAFEN0 0x88 +#define GPAFEN1 0x8C +#define GPPUD 0x94 +#define GPPUDCLK0 0x98 +#define GPPUDCLK1 0x9C + +static uint32_t gpfsel_get(BCM2835GpioState *s, uint8_t reg) +{ + int i; + uint32_t value = 0; + for (i = 0; i < 10; i++) { + uint32_t index = 10 * reg + i; + if (index < sizeof(s->fsel)) { + value |= (s->fsel[index] & 0x7) << (3 * i); + } + } + return value; +} + +static void gpfsel_set(BCM2835GpioState *s, uint8_t reg, uint32_t value) +{ + int i; + for (i = 0; i < 10; i++) { + uint32_t index = 10 * reg + i; + if (index < sizeof(s->fsel)) { + int fsel = (value >> (3 * i)) & 0x7; + s->fsel[index] = fsel; + } + } + + /* SD controller selection (48-53) */ + if (s->sd_fsel != 0 + && (s->fsel[48] == 0) /* SD_CLK_R */ + && (s->fsel[49] == 0) /* SD_CMD_R */ + && (s->fsel[50] == 0) /* SD_DATA0_R */ + && (s->fsel[51] == 0) /* SD_DATA1_R */ + && (s->fsel[52] == 0) /* SD_DATA2_R */ + && (s->fsel[53] == 0) /* SD_DATA3_R */ + ) { + /* SDHCI controller selected */ + sdbus_reparent_card(s->sdbus_sdhost, s->sdbus_sdhci); + s->sd_fsel = 0; + } else if (s->sd_fsel != 4 + && (s->fsel[48] == 4) /* SD_CLK_R */ + && (s->fsel[49] == 4) /* SD_CMD_R */ + && (s->fsel[50] == 4) /* SD_DATA0_R */ + && (s->fsel[51] == 4) /* SD_DATA1_R */ + && (s->fsel[52] == 4) /* SD_DATA2_R */ + && (s->fsel[53] == 4) /* SD_DATA3_R */ + ) { + /* SDHost controller selected */ + sdbus_reparent_card(s->sdbus_sdhci, s->sdbus_sdhost); + s->sd_fsel = 4; + } +} + +static int gpfsel_is_out(BCM2835GpioState *s, int index) +{ + if (index >= 0 && index < 54) { + return s->fsel[index] == 1; + } + return 0; +} + +static void gpset(BCM2835GpioState *s, + uint32_t val, uint8_t start, uint8_t count, uint32_t *lev) +{ + uint32_t changes = val & ~*lev; + uint32_t cur = 1; + + int i; + for (i = 0; i < count; i++) { + if ((changes & cur) && (gpfsel_is_out(s, start + i))) { + qemu_set_irq(s->out[start + i], 1); + } + cur <<= 1; + } + + *lev |= val; +} + +static void gpclr(BCM2835GpioState *s, + uint32_t val, uint8_t start, uint8_t count, uint32_t *lev) +{ + uint32_t changes = val & *lev; + uint32_t cur = 1; + + int i; + for (i = 0; i < count; i++) { + if ((changes & cur) && (gpfsel_is_out(s, start + i))) { + qemu_set_irq(s->out[start + i], 0); + } + cur <<= 1; + } + + *lev &= ~val; +} + +static uint64_t bcm2835_gpio_read(void *opaque, hwaddr offset, + unsigned size) +{ + BCM2835GpioState *s = (BCM2835GpioState *)opaque; + + switch (offset) { + case GPFSEL0: + case GPFSEL1: + case GPFSEL2: + case GPFSEL3: + case GPFSEL4: + case GPFSEL5: + return gpfsel_get(s, offset / 4); + case GPSET0: + case GPSET1: + /* Write Only */ + return 0; + case GPCLR0: + case GPCLR1: + /* Write Only */ + return 0; + case GPLEV0: + return s->lev0; + case GPLEV1: + return s->lev1; + case GPEDS0: + case GPEDS1: + case GPREN0: + case GPREN1: + case GPFEN0: + case GPFEN1: + case GPHEN0: + case GPHEN1: + case GPLEN0: + case GPLEN1: + case GPAREN0: + case GPAREN1: + case GPAFEN0: + case GPAFEN1: + case GPPUD: + case GPPUDCLK0: + case GPPUDCLK1: + /* Not implemented */ + return 0; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); + break; + } + + return 0; +} + +static void bcm2835_gpio_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + BCM2835GpioState *s = (BCM2835GpioState *)opaque; + + switch (offset) { + case GPFSEL0: + case GPFSEL1: + case GPFSEL2: + case GPFSEL3: + case GPFSEL4: + case GPFSEL5: + gpfsel_set(s, offset / 4, value); + break; + case GPSET0: + gpset(s, value, 0, 32, &s->lev0); + break; + case GPSET1: + gpset(s, value, 32, 22, &s->lev1); + break; + case GPCLR0: + gpclr(s, value, 0, 32, &s->lev0); + break; + case GPCLR1: + gpclr(s, value, 32, 22, &s->lev1); + break; + case GPLEV0: + case GPLEV1: + /* Read Only */ + break; + case GPEDS0: + case GPEDS1: + case GPREN0: + case GPREN1: + case GPFEN0: + case GPFEN1: + case GPHEN0: + case GPHEN1: + case GPLEN0: + case GPLEN1: + case GPAREN0: + case GPAREN1: + case GPAFEN0: + case GPAFEN1: + case GPPUD: + case GPPUDCLK0: + case GPPUDCLK1: + /* Not implemented */ + break; + default: + goto err_out; + } + return; + +err_out: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); +} + +static void bcm2835_gpio_reset(DeviceState *dev) +{ + BCM2835GpioState *s = BCM2835_GPIO(dev); + + int i; + for (i = 0; i < 6; i++) { + gpfsel_set(s, i, 0); + } + + s->sd_fsel = 0; + + /* SDHCI is selected by default */ + sdbus_reparent_card(&s->sdbus, s->sdbus_sdhci); + + s->lev0 = 0; + s->lev1 = 0; +} + +static const MemoryRegionOps bcm2835_gpio_ops = { + .read = bcm2835_gpio_read, + .write = bcm2835_gpio_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription vmstate_bcm2835_gpio = { + .name = "bcm2835_gpio", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(fsel, BCM2835GpioState, 54), + VMSTATE_UINT32(lev0, BCM2835GpioState), + VMSTATE_UINT32(lev1, BCM2835GpioState), + VMSTATE_UINT8(sd_fsel, BCM2835GpioState), + VMSTATE_END_OF_LIST() + } +}; + +static void bcm2835_gpio_init(Object *obj) +{ + BCM2835GpioState *s = BCM2835_GPIO(obj); + DeviceState *dev = DEVICE(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), + TYPE_SD_BUS, DEVICE(s), "sd-bus"); + + memory_region_init_io(&s->iomem, obj, + &bcm2835_gpio_ops, s, "bcm2835_gpio", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); + qdev_init_gpio_out(dev, s->out, 54); +} + +static void bcm2835_gpio_realize(DeviceState *dev, Error **errp) +{ + BCM2835GpioState *s = BCM2835_GPIO(dev); + Object *obj; + Error *err = NULL; + + obj = object_property_get_link(OBJECT(dev), "sdbus-sdhci", &err); + if (obj == NULL) { + error_setg(errp, "%s: required sdhci link not found: %s", + __func__, error_get_pretty(err)); + return; + } + s->sdbus_sdhci = SD_BUS(obj); + + obj = object_property_get_link(OBJECT(dev), "sdbus-sdhost", &err); + if (obj == NULL) { + error_setg(errp, "%s: required sdhost link not found: %s", + __func__, error_get_pretty(err)); + return; + } + s->sdbus_sdhost = SD_BUS(obj); +} + +static void bcm2835_gpio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_bcm2835_gpio; + dc->realize = &bcm2835_gpio_realize; + dc->reset = &bcm2835_gpio_reset; +} + +static const TypeInfo bcm2835_gpio_info = { + .name = TYPE_BCM2835_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835GpioState), + .instance_init = bcm2835_gpio_init, + .class_init = bcm2835_gpio_class_init, +}; + +static void bcm2835_gpio_register_types(void) +{ + type_register_static(&bcm2835_gpio_info); +} + +type_init(bcm2835_gpio_register_types) -- 2.7.4 From: Clement Deschamps <clement.deschamps@antfield.fr> This adds the bcm2835_sdhost and bcm2835_gpio to the BCM2835 platform. For supporting the SD controller selection (alternate function of GPIOs 48-53), the bcm2835_gpio now exposes an sdbus. It also has a link to both the sdbus of sdhci and sdhost controllers, and the card is reparented from one bus to another when the alternate function of GPIOs 48-53 is modified. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-5-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-5-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 4 ++++ hw/arm/bcm2835_peripherals.c | 43 ++++++++++++++++++++++++++++++++++-- 2 files changed, 45 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/bcm2835_rng.h" #include "hw/misc/bcm2835_mbox.h" #include "hw/sd/sdhci.h" +#include "hw/sd/bcm2835_sdhost.h" +#include "hw/gpio/bcm2835_gpio.h" #define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals" #define BCM2835_PERIPHERALS(obj) \ @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { BCM2835RngState rng; BCM2835MboxState mboxes; SDHCIState sdhci; + BCM2835SDHostState sdhost; + BCM2835GpioState gpio; } BCM2835PeripheralState; #endif /* BCM2835_PERIPHERALS_H */ diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) object_property_add_child(obj, "sdhci", OBJECT(&s->sdhci), NULL); qdev_set_parent_bus(DEVICE(&s->sdhci), sysbus_get_default()); + /* SDHOST */ + object_initialize(&s->sdhost, sizeof(s->sdhost), TYPE_BCM2835_SDHOST); + object_property_add_child(obj, "sdhost", OBJECT(&s->sdhost), NULL); + qdev_set_parent_bus(DEVICE(&s->sdhost), sysbus_get_default()); + /* DMA Channels */ object_initialize(&s->dma, sizeof(s->dma), TYPE_BCM2835_DMA); object_property_add_child(obj, "dma", OBJECT(&s->dma), NULL); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_init(Object *obj) object_property_add_const_link(OBJECT(&s->dma), "dma-mr", OBJECT(&s->gpu_bus_mr), &error_abort); + + /* GPIO */ + object_initialize(&s->gpio, sizeof(s->gpio), TYPE_BCM2835_GPIO); + object_property_add_child(obj, "gpio", OBJECT(&s->gpio), NULL); + qdev_set_parent_bus(DEVICE(&s->gpio), sysbus_get_default()); + + object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhci", + OBJECT(&s->sdhci.sdbus), &error_abort); + object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost", + OBJECT(&s->sdhost.sdbus), &error_abort); } static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, INTERRUPT_ARASANSDIO)); - object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->sdhci), "sd-bus", - &err); + + /* SDHOST */ + object_property_set_bool(OBJECT(&s->sdhost), true, "realized", &err); if (err) { error_propagate(errp, err); return; } + memory_region_add_subregion(&s->peri_mr, MMCI0_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->sdhost), 0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhost), 0, + qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, + INTERRUPT_SDIO)); + /* DMA Channels */ object_property_set_bool(OBJECT(&s->dma), true, "realized", &err); if (err) { @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) BCM2835_IC_GPU_IRQ, INTERRUPT_DMA0 + n)); } + + /* GPIO */ + object_property_set_bool(OBJECT(&s->gpio), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + memory_region_add_subregion(&s->peri_mr, GPIO_OFFSET, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0)); + + object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus", + &err); + if (err) { + error_propagate(errp, err); + return; + } } static void bcm2835_peripherals_class_init(ObjectClass *oc, void *data) -- 2.7.4 Second pull request of the week; mostly RTH's support for some new-in-v8.1/v8.3 instructions, and my v8M board model. thanks -- PMM The following changes since commit 427cbc7e4136a061628cb4315cc8182ea36d772f: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2018-03-01 18:46:41 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180302 for you to fetch changes up to e66a67bf28e1b4fce2e3d72a2610dbd48d9d3078: target/arm: Enable ARM_FEATURE_V8_FCMA (2018-03-02 11:03:45 +0000) ---------------------------------------------------------------- target-arm queue: * implement FCMA and RDM v8.1 and v8.3 instructions * enable Cortex-M33 v8M core, and provide new mps2-an505 board model that uses it * decodetree: Propagate return value from translate subroutines * xlnx-zynqmp: Implement the RTC device ---------------------------------------------------------------- Alistair Francis (3): xlnx-zynqmp-rtc: Initial commit xlnx-zynqmp-rtc: Add basic time support xlnx-zynqmp: Connect the RTC device Peter Maydell (19): loader: Add new load_ramdisk_as() hw/arm/boot: Honour CPU's address space for image loads hw/arm/armv7m: Honour CPU's address space for image loads target/arm: Define an IDAU interface armv7m: Forward idau property to CPU object target/arm: Define init-svtor property for the reset secure VTOR value armv7m: Forward init-svtor property to CPU object target/arm: Add Cortex-M33 hw/misc/unimp: Move struct to header file include/hw/or-irq.h: Add missing include guard qdev: Add new qdev_init_gpio_in_named_with_opaque() hw/core/split-irq: Device that splits IRQ lines hw/misc/mps2-fpgaio: FPGA control block for MPS2 AN505 hw/misc/tz-ppc: Model TrustZone peripheral protection controller hw/misc/iotkit-secctl: Arm IoT Kit security controller initial skeleton hw/misc/iotkit-secctl: Add handling for PPCs hw/misc/iotkit-secctl: Add remaining simple registers hw/arm/iotkit: Model Arm IOT Kit mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA image Richard Henderson (17): decodetree: Propagate return value from translate subroutines target/arm: Add ARM_FEATURE_V8_RDM target/arm: Refactor disas_simd_indexed decode target/arm: Refactor disas_simd_indexed size checks target/arm: Decode aa64 armv8.1 scalar three same extra target/arm: Decode aa64 armv8.1 three same extra target/arm: Decode aa64 armv8.1 scalar/vector x indexed element target/arm: Decode aa32 armv8.1 three same target/arm: Decode aa32 armv8.1 two reg and a scalar target/arm: Enable ARM_FEATURE_V8_RDM target/arm: Add ARM_FEATURE_V8_FCMA target/arm: Decode aa64 armv8.3 fcadd target/arm: Decode aa64 armv8.3 fcmla target/arm: Decode aa32 armv8.3 3-same target/arm: Decode aa32 armv8.3 2-reg-index target/arm: Decode t32 simd 3reg and 2reg_scalar extension target/arm: Enable ARM_FEATURE_V8_FCMA hw/arm/Makefile.objs | 2 + hw/core/Makefile.objs | 1 + hw/misc/Makefile.objs | 4 + hw/timer/Makefile.objs | 1 + target/arm/Makefile.objs | 2 +- include/hw/arm/armv7m.h | 5 + include/hw/arm/iotkit.h | 109 ++++++ include/hw/arm/xlnx-zynqmp.h | 2 + include/hw/core/split-irq.h | 57 +++ include/hw/irq.h | 4 +- include/hw/loader.h | 12 +- include/hw/misc/iotkit-secctl.h | 103 ++++++ include/hw/misc/mps2-fpgaio.h | 43 +++ include/hw/misc/tz-ppc.h | 101 ++++++ include/hw/misc/unimp.h | 10 + include/hw/or-irq.h | 5 + include/hw/qdev-core.h | 30 +- include/hw/timer/xlnx-zynqmp-rtc.h | 86 +++++ target/arm/cpu.h | 8 + target/arm/helper.h | 31 ++ target/arm/idau.h | 61 ++++ hw/arm/armv7m.c | 35 +- hw/arm/boot.c | 119 ++++--- hw/arm/iotkit.c | 598 +++++++++++++++++++++++++++++++ hw/arm/mps2-tz.c | 503 ++++++++++++++++++++++++++ hw/arm/xlnx-zynqmp.c | 14 + hw/core/loader.c | 8 +- hw/core/qdev.c | 8 +- hw/core/split-irq.c | 89 +++++ hw/misc/iotkit-secctl.c | 704 +++++++++++++++++++++++++++++++++++++ hw/misc/mps2-fpgaio.c | 176 ++++++++++ hw/misc/tz-ppc.c | 302 ++++++++++++++++ hw/misc/unimp.c | 10 - hw/timer/xlnx-zynqmp-rtc.c | 272 ++++++++++++++ linux-user/elfload.c | 2 + target/arm/cpu.c | 66 +++- target/arm/cpu64.c | 2 + target/arm/helper.c | 28 +- target/arm/translate-a64.c | 514 +++++++++++++++++++++------ target/arm/translate.c | 275 +++++++++++++-- target/arm/vec_helper.c | 429 ++++++++++++++++++++++ default-configs/arm-softmmu.mak | 5 + hw/misc/trace-events | 24 ++ hw/timer/trace-events | 3 + scripts/decodetree.py | 5 +- 45 files changed, 4668 insertions(+), 200 deletions(-) create mode 100644 include/hw/arm/iotkit.h create mode 100644 include/hw/core/split-irq.h create mode 100644 include/hw/misc/iotkit-secctl.h create mode 100644 include/hw/misc/mps2-fpgaio.h create mode 100644 include/hw/misc/tz-ppc.h create mode 100644 include/hw/timer/xlnx-zynqmp-rtc.h create mode 100644 target/arm/idau.h create mode 100644 hw/arm/iotkit.c create mode 100644 hw/arm/mps2-tz.c create mode 100644 hw/core/split-irq.c create mode 100644 hw/misc/iotkit-secctl.c create mode 100644 hw/misc/mps2-fpgaio.c create mode 100644 hw/misc/tz-ppc.c create mode 100644 hw/timer/xlnx-zynqmp-rtc.c create mode 100644 target/arm/vec_helper.c From: Alistair Francis <alistair.francis@xilinx.com> Initial commit of the ZynqMP RTC device. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/timer/xlnx-zynqmp-rtc.h | 84 +++++++++++++++ hw/timer/xlnx-zynqmp-rtc.c | 214 +++++++++++++++++++++++++++++++++++++ 3 files changed, 299 insertions(+) create mode 100644 include/hw/timer/xlnx-zynqmp-rtc.h create mode 100644 hw/timer/xlnx-zynqmp-rtc.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IMX) += imx_epit.o common-obj-$(CONFIG_IMX) += imx_gpt.o common-obj-$(CONFIG_LM32) += lm32_timer.o common-obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o +common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-rtc.o obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o obj-$(CONFIG_EXYNOS4) += exynos4210_mct.o diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw/register.h" + +#define TYPE_XLNX_ZYNQMP_RTC "xlnx-zynmp.rtc" + +#define XLNX_ZYNQMP_RTC(obj) \ + OBJECT_CHECK(XlnxZynqMPRTC, (obj), TYPE_XLNX_ZYNQMP_RTC) + +REG32(SET_TIME_WRITE, 0x0) +REG32(SET_TIME_READ, 0x4) +REG32(CALIB_WRITE, 0x8) + FIELD(CALIB_WRITE, FRACTION_EN, 20, 1) + FIELD(CALIB_WRITE, FRACTION_DATA, 16, 4) + FIELD(CALIB_WRITE, MAX_TICK, 0, 16) +REG32(CALIB_READ, 0xc) + FIELD(CALIB_READ, FRACTION_EN, 20, 1) + FIELD(CALIB_READ, FRACTION_DATA, 16, 4) + FIELD(CALIB_READ, MAX_TICK, 0, 16) +REG32(CURRENT_TIME, 0x10) +REG32(CURRENT_TICK, 0x14) + FIELD(CURRENT_TICK, VALUE, 0, 16) +REG32(ALARM, 0x18) +REG32(RTC_INT_STATUS, 0x20) + FIELD(RTC_INT_STATUS, ALARM, 1, 1) + FIELD(RTC_INT_STATUS, SECONDS, 0, 1) +REG32(RTC_INT_MASK, 0x24) + FIELD(RTC_INT_MASK, ALARM, 1, 1) + FIELD(RTC_INT_MASK, SECONDS, 0, 1) +REG32(RTC_INT_EN, 0x28) + FIELD(RTC_INT_EN, ALARM, 1, 1) + FIELD(RTC_INT_EN, SECONDS, 0, 1) +REG32(RTC_INT_DIS, 0x2c) + FIELD(RTC_INT_DIS, ALARM, 1, 1) + FIELD(RTC_INT_DIS, SECONDS, 0, 1) +REG32(ADDR_ERROR, 0x30) + FIELD(ADDR_ERROR, STATUS, 0, 1) +REG32(ADDR_ERROR_INT_MASK, 0x34) + FIELD(ADDR_ERROR_INT_MASK, MASK, 0, 1) +REG32(ADDR_ERROR_INT_EN, 0x38) + FIELD(ADDR_ERROR_INT_EN, MASK, 0, 1) +REG32(ADDR_ERROR_INT_DIS, 0x3c) + FIELD(ADDR_ERROR_INT_DIS, MASK, 0, 1) +REG32(CONTROL, 0x40) + FIELD(CONTROL, BATTERY_DISABLE, 31, 1) + FIELD(CONTROL, OSC_CNTRL, 24, 4) + FIELD(CONTROL, SLVERR_ENABLE, 0, 1) +REG32(SAFETY_CHK, 0x50) + +#define XLNX_ZYNQMP_RTC_R_MAX (R_SAFETY_CHK + 1) + +typedef struct XlnxZynqMPRTC { + SysBusDevice parent_obj; + MemoryRegion iomem; + qemu_irq irq_rtc_int; + qemu_irq irq_addr_error_int; + + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; + RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; +} XlnxZynqMPRTC; diff --git a/hw/timer/xlnx-zynqmp-rtc.c b/hw/timer/xlnx-zynqmp-rtc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/xlnx-zynqmp-rtc.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/register.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" + +#ifndef XLNX_ZYNQMP_RTC_ERR_DEBUG +#define XLNX_ZYNQMP_RTC_ERR_DEBUG 0 +#endif + +static void rtc_int_update_irq(XlnxZynqMPRTC *s) +{ + bool pending = s->regs[R_RTC_INT_STATUS] & ~s->regs[R_RTC_INT_MASK]; + qemu_set_irq(s->irq_rtc_int, pending); +} + +static void addr_error_int_update_irq(XlnxZynqMPRTC *s) +{ + bool pending = s->regs[R_ADDR_ERROR] & ~s->regs[R_ADDR_ERROR_INT_MASK]; + qemu_set_irq(s->irq_addr_error_int, pending); +} + +static void rtc_int_status_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + rtc_int_update_irq(s); +} + +static uint64_t rtc_int_en_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_RTC_INT_MASK] &= (uint32_t) ~val64; + rtc_int_update_irq(s); + return 0; +} + +static uint64_t rtc_int_dis_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_RTC_INT_MASK] |= (uint32_t) val64; + rtc_int_update_irq(s); + return 0; +} + +static void addr_error_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + addr_error_int_update_irq(s); +} + +static uint64_t addr_error_int_en_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_ADDR_ERROR_INT_MASK] &= (uint32_t) ~val64; + addr_error_int_update_irq(s); + return 0; +} + +static uint64_t addr_error_int_dis_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_ADDR_ERROR_INT_MASK] |= (uint32_t) val64; + addr_error_int_update_irq(s); + return 0; +} + +static const RegisterAccessInfo rtc_regs_info[] = { + { .name = "SET_TIME_WRITE", .addr = A_SET_TIME_WRITE, + },{ .name = "SET_TIME_READ", .addr = A_SET_TIME_READ, + .ro = 0xffffffff, + },{ .name = "CALIB_WRITE", .addr = A_CALIB_WRITE, + },{ .name = "CALIB_READ", .addr = A_CALIB_READ, + .ro = 0x1fffff, + },{ .name = "CURRENT_TIME", .addr = A_CURRENT_TIME, + .ro = 0xffffffff, + },{ .name = "CURRENT_TICK", .addr = A_CURRENT_TICK, + .ro = 0xffff, + },{ .name = "ALARM", .addr = A_ALARM, + },{ .name = "RTC_INT_STATUS", .addr = A_RTC_INT_STATUS, + .w1c = 0x3, + .post_write = rtc_int_status_postw, + },{ .name = "RTC_INT_MASK", .addr = A_RTC_INT_MASK, + .reset = 0x3, + .ro = 0x3, + },{ .name = "RTC_INT_EN", .addr = A_RTC_INT_EN, + .pre_write = rtc_int_en_prew, + },{ .name = "RTC_INT_DIS", .addr = A_RTC_INT_DIS, + .pre_write = rtc_int_dis_prew, + },{ .name = "ADDR_ERROR", .addr = A_ADDR_ERROR, + .w1c = 0x1, + .post_write = addr_error_postw, + },{ .name = "ADDR_ERROR_INT_MASK", .addr = A_ADDR_ERROR_INT_MASK, + .reset = 0x1, + .ro = 0x1, + },{ .name = "ADDR_ERROR_INT_EN", .addr = A_ADDR_ERROR_INT_EN, + .pre_write = addr_error_int_en_prew, + },{ .name = "ADDR_ERROR_INT_DIS", .addr = A_ADDR_ERROR_INT_DIS, + .pre_write = addr_error_int_dis_prew, + },{ .name = "CONTROL", .addr = A_CONTROL, + .reset = 0x1000000, + .rsvd = 0x70fffffe, + },{ .name = "SAFETY_CHK", .addr = A_SAFETY_CHK, + } +}; + +static void rtc_reset(DeviceState *dev) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(dev); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + register_reset(&s->regs_info[i]); + } + + rtc_int_update_irq(s); + addr_error_int_update_irq(s); +} + +static const MemoryRegionOps rtc_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void rtc_init(Object *obj) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + RegisterInfoArray *reg_array; + + memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_RTC, + XLNX_ZYNQMP_RTC_R_MAX * 4); + reg_array = + register_init_block32(DEVICE(obj), rtc_regs_info, + ARRAY_SIZE(rtc_regs_info), + s->regs_info, s->regs, + &rtc_ops, + XLNX_ZYNQMP_RTC_ERR_DEBUG, + XLNX_ZYNQMP_RTC_R_MAX * 4); + memory_region_add_subregion(&s->iomem, + 0x0, + &reg_array->mem); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq_rtc_int); + sysbus_init_irq(sbd, &s->irq_addr_error_int); +} + +static const VMStateDescription vmstate_rtc = { + .name = TYPE_XLNX_ZYNQMP_RTC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPRTC, XLNX_ZYNQMP_RTC_R_MAX), + VMSTATE_END_OF_LIST(), + } +}; + +static void rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = rtc_reset; + dc->vmsd = &vmstate_rtc; +} + +static const TypeInfo rtc_info = { + .name = TYPE_XLNX_ZYNQMP_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxZynqMPRTC), + .class_init = rtc_class_init, + .instance_init = rtc_init, +}; + +static void rtc_register_types(void) +{ + type_register_static(&rtc_info); +} + +type_init(rtc_register_types) -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> Allow the guest to determine the time set from the QEMU command line. This includes adding a trace event to debug the new time. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/xlnx-zynqmp-rtc.h | 2 ++ hw/timer/xlnx-zynqmp-rtc.c | 58 ++++++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 3 ++ 3 files changed, 63 insertions(+) diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/xlnx-zynqmp-rtc.h +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPRTC { qemu_irq irq_rtc_int; qemu_irq irq_addr_error_int; + uint32_t tick_offset; + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; } XlnxZynqMPRTC; diff --git a/hw/timer/xlnx-zynqmp-rtc.c b/hw/timer/xlnx-zynqmp-rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xlnx-zynqmp-rtc.c +++ b/hw/timer/xlnx-zynqmp-rtc.c @@ -XXX,XX +XXX,XX @@ #include "hw/register.h" #include "qemu/bitops.h" #include "qemu/log.h" +#include "hw/ptimer.h" +#include "qemu/cutils.h" +#include "sysemu/sysemu.h" +#include "trace.h" #include "hw/timer/xlnx-zynqmp-rtc.h" #ifndef XLNX_ZYNQMP_RTC_ERR_DEBUG @@ -XXX,XX +XXX,XX @@ static void addr_error_int_update_irq(XlnxZynqMPRTC *s) qemu_set_irq(s->irq_addr_error_int, pending); } +static uint32_t rtc_get_count(XlnxZynqMPRTC *s) +{ + int64_t now = qemu_clock_get_ns(rtc_clock); + return s->tick_offset + now / NANOSECONDS_PER_SECOND; +} + +static uint64_t current_time_postr(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + return rtc_get_count(s); +} + static void rtc_int_status_postw(RegisterInfo *reg, uint64_t val64) { XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); @@ -XXX,XX +XXX,XX @@ static uint64_t addr_error_int_dis_prew(RegisterInfo *reg, uint64_t val64) static const RegisterAccessInfo rtc_regs_info[] = { { .name = "SET_TIME_WRITE", .addr = A_SET_TIME_WRITE, + .unimp = MAKE_64BIT_MASK(0, 32), },{ .name = "SET_TIME_READ", .addr = A_SET_TIME_READ, .ro = 0xffffffff, + .post_read = current_time_postr, },{ .name = "CALIB_WRITE", .addr = A_CALIB_WRITE, + .unimp = MAKE_64BIT_MASK(0, 32), },{ .name = "CALIB_READ", .addr = A_CALIB_READ, .ro = 0x1fffff, },{ .name = "CURRENT_TIME", .addr = A_CURRENT_TIME, .ro = 0xffffffff, + .post_read = current_time_postr, },{ .name = "CURRENT_TICK", .addr = A_CURRENT_TICK, .ro = 0xffff, },{ .name = "ALARM", .addr = A_ALARM, @@ -XXX,XX +XXX,XX @@ static void rtc_init(Object *obj) XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); RegisterInfoArray *reg_array; + struct tm current_tm; memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_RTC, XLNX_ZYNQMP_RTC_R_MAX * 4); @@ -XXX,XX +XXX,XX @@ static void rtc_init(Object *obj) sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq_rtc_int); sysbus_init_irq(sbd, &s->irq_addr_error_int); + + qemu_get_timedate(&current_tm, 0); + s->tick_offset = mktimegm(&current_tm) - + qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + trace_xlnx_zynqmp_rtc_gettime(current_tm.tm_year, current_tm.tm_mon, + current_tm.tm_mday, current_tm.tm_hour, + current_tm.tm_min, current_tm.tm_sec); +} + +static int rtc_pre_save(void *opaque) +{ + XlnxZynqMPRTC *s = opaque; + int64_t now = qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + /* Add the time at migration */ + s->tick_offset = s->tick_offset + now; + + return 0; +} + +static int rtc_post_load(void *opaque, int version_id) +{ + XlnxZynqMPRTC *s = opaque; + int64_t now = qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + /* Subtract the time after migration. This combined with the pre_save + * action results in us having subtracted the time that the guest was + * stopped to the offset. + */ + s->tick_offset = s->tick_offset - now; + + return 0; } static const VMStateDescription vmstate_rtc = { .name = TYPE_XLNX_ZYNQMP_RTC, .version_id = 1, .minimum_version_id = 1, + .pre_save = rtc_pre_save, + .post_load = rtc_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPRTC, XLNX_ZYNQMP_RTC_R_MAX), + VMSTATE_UINT32(tick_offset, XlnxZynqMPRTC), VMSTATE_END_OF_LIST(), } }; diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr cmsdk_apb_timer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_timer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_timer_reset(void) "CMSDK APB timer: reset" + +# hw/timer/xlnx-zynqmp-rtc.c +xlnx_zynqmp_rtc_gettime(int year, int month, int day, int hour, int min, int sec) "Get time from host: %d-%d-%d %2d:%02d:%02d" -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 2 ++ hw/arm/xlnx-zynqmp.c | 14 ++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #include "hw/dma/xlnx_dpdma.h" #include "hw/display/xlnx_dp.h" #include "hw/intc/xlnx-zynqmp-ipi.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp" #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \ @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPState { XlnxDPState dp; XlnxDPDMAState dpdma; XlnxZynqMPIPI ipi; + XlnxZynqMPRTC rtc; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #define IPI_ADDR 0xFF300000 #define IPI_IRQ 64 +#define RTC_ADDR 0xffa60000 +#define RTC_IRQ 26 + #define SDHCI_CAPABILITIES 0x280737ec6481 /* Datasheet: UG1085 (v1.7) */ static const uint64_t gem_addr[XLNX_ZYNQMP_NUM_GEMS] = { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(Object *obj) object_initialize(&s->ipi, sizeof(s->ipi), TYPE_XLNX_ZYNQMP_IPI); qdev_set_parent_bus(DEVICE(&s->ipi), sysbus_get_default()); + + object_initialize(&s->rtc, sizeof(s->rtc), TYPE_XLNX_ZYNQMP_RTC); + qdev_set_parent_bus(DEVICE(&s->rtc), sysbus_get_default()); } static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->ipi), 0, IPI_ADDR); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ipi), 0, gic_spi[IPI_IRQ]); + + object_property_set_bool(OBJECT(&s->rtc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]); } static Property xlnx_zynqmp_props[] = { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Allow the translate subroutines to return false for invalid insns. At present we can of course invoke an invalid insn exception from within the translate subroutine, but in the short term this consolidates code. In the long term it would allow the decodetree language to support overlapping patterns for ISA extensions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227232618.2908-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- scripts/decodetree.py | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/scripts/decodetree.py b/scripts/decodetree.py index XXXXXXX..XXXXXXX 100755 --- a/scripts/decodetree.py +++ b/scripts/decodetree.py @@ -XXX,XX +XXX,XX @@ class Pattern(General): global translate_prefix output('typedef ', self.base.base.struct_name(), ' arg_', self.name, ';\n') - output(translate_scope, 'void ', translate_prefix, '_', self.name, + output(translate_scope, 'bool ', translate_prefix, '_', self.name, '(DisasContext *ctx, arg_', self.name, ' *a, ', insntype, ' insn);\n') @@ -XXX,XX +XXX,XX @@ class Pattern(General): output(ind, self.base.extract_name(), '(&u.f_', arg, ', insn);\n') for n, f in self.fields.items(): output(ind, 'u.f_', arg, '.', n, ' = ', f.str_extract(), ';\n') - output(ind, translate_prefix, '_', self.name, + output(ind, 'return ', translate_prefix, '_', self.name, '(ctx, &u.f_', arg, ', insn);\n') - output(ind, 'return true;\n') # end Pattern -- 2.16.2 Add a function load_ramdisk_as() which behaves like the existing load_ramdisk() but allows the caller to specify the AddressSpace to use. This matches the pattern we have already for various other loader functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-2-peter.maydell@linaro.org --- include/hw/loader.h | 12 +++++++++++- hw/core/loader.c | 8 +++++++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ int load_uimage(const char *filename, hwaddr *ep, void *translate_opaque); /** - * load_ramdisk: + * load_ramdisk_as: * @filename: Path to the ramdisk image * @addr: Memory address to load the ramdisk to * @max_sz: Maximum allowed ramdisk size (for non-u-boot ramdisks) + * @as: The AddressSpace to load the ELF to. The value of address_space_memory + * is used if nothing is supplied here. * * Load a ramdisk image with U-Boot header to the specified memory * address. * * Returns the size of the loaded image on success, -1 otherwise. */ +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as); + +/** + * load_ramdisk: + * Same as load_ramdisk_as(), but doesn't allow the caller to specify + * an AddressSpace. + */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz); ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen); diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ int load_uimage_as(const char *filename, hwaddr *ep, hwaddr *loadaddr, /* Load a ramdisk. */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz) +{ + return load_ramdisk_as(filename, addr, max_sz, NULL); +} + +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as) { return load_uboot_image(filename, NULL, &addr, NULL, IH_TYPE_RAMDISK, - NULL, NULL, NULL); + NULL, NULL, as); } /* Load a gzip-compressed kernel to a dynamically allocated buffer. */ -- 2.16.2 Instead of loading kernels, device trees, and the like to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-3-peter.maydell@linaro.org --- hw/arm/boot.c | 119 +++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 76 insertions(+), 43 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ #define ARM64_TEXT_OFFSET_OFFSET 8 #define ARM64_MAGIC_OFFSET 56 +static AddressSpace *arm_boot_address_space(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* Return the address space to use for bootloader reads and writes. + * We prefer the secure address space if the CPU has it and we're + * going to boot the guest into it. + */ + int asidx; + CPUState *cs = CPU(cpu); + + if (arm_feature(&cpu->env, ARM_FEATURE_EL3) && info->secure_boot) { + asidx = ARMASIdx_S; + } else { + asidx = ARMASIdx_NS; + } + + return cpu_get_address_space(cs, asidx); +} + typedef enum { FIXUP_NONE = 0, /* do nothing */ FIXUP_TERMINATOR, /* end of insns */ @@ -XXX,XX +XXX,XX @@ static const ARMInsnFixup smpboot[] = { }; static void write_bootloader(const char *name, hwaddr addr, - const ARMInsnFixup *insns, uint32_t *fixupcontext) + const ARMInsnFixup *insns, uint32_t *fixupcontext, + AddressSpace *as) { /* Fix up the specified bootloader fragment and write it into * guest memory using rom_add_blob_fixed(). fixupcontext is @@ -XXX,XX +XXX,XX @@ static void write_bootloader(const char *name, hwaddr addr, code[i] = tswap32(insn); } - rom_add_blob_fixed(name, code, len * sizeof(uint32_t), addr); + rom_add_blob_fixed_as(name, code, len * sizeof(uint32_t), addr, as); g_free(code); } @@ -XXX,XX +XXX,XX @@ static void default_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { uint32_t fixupcontext[FIXUP_MAX]; + AddressSpace *as = arm_boot_address_space(cpu, info); fixupcontext[FIXUP_GIC_CPU_IF] = info->gic_cpu_if_addr; fixupcontext[FIXUP_BOOTREG] = info->smp_bootreg_addr; @@ -XXX,XX +XXX,XX @@ static void default_write_secondary(ARMCPU *cpu, } write_bootloader("smpboot", info->smp_loader_start, - smpboot, fixupcontext); + smpboot, fixupcontext, as); } void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, const struct arm_boot_info *info, hwaddr mvbar_addr) { + AddressSpace *as = arm_boot_address_space(cpu, info); int n; uint32_t mvbar_blob[] = { /* mvbar_addr: secure monitor vectors @@ -XXX,XX +XXX,XX @@ void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, for (n = 0; n < ARRAY_SIZE(mvbar_blob); n++) { mvbar_blob[n] = tswap32(mvbar_blob[n]); } - rom_add_blob_fixed("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), - mvbar_addr); + rom_add_blob_fixed_as("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), + mvbar_addr, as); for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) { board_setup_blob[n] = tswap32(board_setup_blob[n]); } - rom_add_blob_fixed("board-setup", board_setup_blob, - sizeof(board_setup_blob), info->board_setup_addr); + rom_add_blob_fixed_as("board-setup", board_setup_blob, + sizeof(board_setup_blob), info->board_setup_addr, as); } static void default_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { + AddressSpace *as = arm_boot_address_space(cpu, info); CPUState *cs = CPU(cpu); - address_space_stl_notdirty(&address_space_memory, info->smp_bootreg_addr, + address_space_stl_notdirty(as, info->smp_bootreg_addr, 0, MEMTXATTRS_UNSPECIFIED, NULL); cpu_set_pc(cs, info->smp_loader_start); } @@ -XXX,XX +XXX,XX @@ static inline bool have_dtb(const struct arm_boot_info *info) } #define WRITE_WORD(p, value) do { \ - address_space_stl_notdirty(&address_space_memory, p, value, \ + address_space_stl_notdirty(as, p, value, \ MEMTXATTRS_UNSPECIFIED, NULL); \ p += 4; \ } while (0) -static void set_kernel_args(const struct arm_boot_info *info) +static void set_kernel_args(const struct arm_boot_info *info, AddressSpace *as) { int initrd_size = info->initrd_size; hwaddr base = info->loader_start; @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) int cmdline_size; cmdline_size = strlen(info->kernel_cmdline); - cpu_physical_memory_write(p + 8, info->kernel_cmdline, - cmdline_size + 1); + address_space_write(as, p + 8, MEMTXATTRS_UNSPECIFIED, + (const uint8_t *)info->kernel_cmdline, + cmdline_size + 1); cmdline_size = (cmdline_size >> 2) + 1; WRITE_WORD(p, cmdline_size + 2); WRITE_WORD(p, 0x54410009); @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) atag_board_len = (info->atag_board(info, atag_board_buf) + 3) & ~3; WRITE_WORD(p, (atag_board_len + 8) >> 2); WRITE_WORD(p, 0x414f4d50); - cpu_physical_memory_write(p, atag_board_buf, atag_board_len); + address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, + atag_board_buf, atag_board_len); p += atag_board_len; } /* ATAG_END */ @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) WRITE_WORD(p, 0); } -static void set_kernel_args_old(const struct arm_boot_info *info) +static void set_kernel_args_old(const struct arm_boot_info *info, + AddressSpace *as) { hwaddr p; const char *s; @@ -XXX,XX +XXX,XX @@ static void set_kernel_args_old(const struct arm_boot_info *info) } s = info->kernel_cmdline; if (s) { - cpu_physical_memory_write(p, s, strlen(s) + 1); + address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, + (const uint8_t *)s, strlen(s) + 1); } else { WRITE_WORD(p, 0); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_psci_node(void *fdt) * @addr: the address to load the image at * @binfo: struct describing the boot environment * @addr_limit: upper limit of the available memory area at @addr + * @as: address space to load image to * * Load a device tree supplied by the machine or by the user with the * '-dtb' command line option, and put it at offset @addr in target @@ -XXX,XX +XXX,XX @@ static void fdt_add_psci_node(void *fdt) * Note: Must not be called unless have_dtb(binfo) is true. */ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, - hwaddr addr_limit) + hwaddr addr_limit, AddressSpace *as) { void *fdt = NULL; int size, rc; @@ -XXX,XX +XXX,XX @@ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, /* Put the DTB into the memory map as a ROM image: this will ensure * the DTB is copied again upon reset, even if addr points into RAM. */ - rom_add_blob_fixed("dtb", fdt, size, addr); + rom_add_blob_fixed_as("dtb", fdt, size, addr, as); g_free(fdt); @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) } if (cs == first_cpu) { + AddressSpace *as = arm_boot_address_space(cpu, info); + cpu_set_pc(cs, info->loader_start); if (!have_dtb(info)) { if (old_param) { - set_kernel_args_old(info); + set_kernel_args_old(info, as); } else { - set_kernel_args(info); + set_kernel_args(info, as); } } } else { @@ -XXX,XX +XXX,XX @@ static int do_arm_linux_init(Object *obj, void *opaque) static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine) + int elf_machine, AddressSpace *as) { bool elf_is64; union { @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } } - ret = load_elf(info->kernel_filename, NULL, NULL, - pentry, lowaddr, highaddr, big_endian, elf_machine, - 1, data_swab); + ret = load_elf_as(info->kernel_filename, NULL, NULL, + pentry, lowaddr, highaddr, big_endian, elf_machine, + 1, data_swab, as); if (ret <= 0) { /* The header loaded but the image didn't */ exit(1); @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, - hwaddr *entry) + hwaddr *entry, AddressSpace *as) { hwaddr kernel_load_offset = KERNEL64_LOAD_ADDR; uint8_t *buffer; @@ -XXX,XX +XXX,XX @@ static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, } *entry = mem_base + kernel_load_offset; - rom_add_blob_fixed(filename, buffer, size, *entry); + rom_add_blob_fixed_as(filename, buffer, size, *entry, as); g_free(buffer); @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) ARMCPU *cpu = n->cpu; struct arm_boot_info *info = container_of(n, struct arm_boot_info, load_kernel_notifier); + AddressSpace *as = arm_boot_address_space(cpu, info); /* The board code is not supposed to set secure_board_setup unless * running its code in secure mode is actually possible, and KVM @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) * the kernel is supposed to be loaded by the bootloader), copy the * DTB to the base of RAM for the bootloader to pick up. */ - if (load_dtb(info->loader_start, info, 0) < 0) { + if (load_dtb(info->loader_start, info, 0, as) < 0) { exit(1); } } @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) /* Assume that raw images are linux kernels, and ELF images are not. */ kernel_size = arm_load_elf(info, &elf_entry, &elf_low_addr, - &elf_high_addr, elf_machine); + &elf_high_addr, elf_machine, as); if (kernel_size > 0 && have_dtb(info)) { /* If there is still some room left at the base of RAM, try and put * the DTB there like we do for images loaded with -bios or -pflash. @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) if (elf_low_addr < info->loader_start) { elf_low_addr = 0; } - if (load_dtb(info->loader_start, info, elf_low_addr) < 0) { + if (load_dtb(info->loader_start, info, elf_low_addr, as) < 0) { exit(1); } } } entry = elf_entry; if (kernel_size < 0) { - kernel_size = load_uimage(info->kernel_filename, &entry, NULL, - &is_linux, NULL, NULL); + kernel_size = load_uimage_as(info->kernel_filename, &entry, NULL, + &is_linux, NULL, NULL, as); } if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) { kernel_size = load_aarch64_image(info->kernel_filename, - info->loader_start, &entry); + info->loader_start, &entry, as); is_linux = 1; } else if (kernel_size < 0) { /* 32-bit ARM */ entry = info->loader_start + KERNEL_LOAD_ADDR; - kernel_size = load_image_targphys(info->kernel_filename, entry, - info->ram_size - KERNEL_LOAD_ADDR); + kernel_size = load_image_targphys_as(info->kernel_filename, entry, + info->ram_size - KERNEL_LOAD_ADDR, + as); is_linux = 1; } if (kernel_size < 0) { @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) uint32_t fixupcontext[FIXUP_MAX]; if (info->initrd_filename) { - initrd_size = load_ramdisk(info->initrd_filename, - info->initrd_start, - info->ram_size - - info->initrd_start); + initrd_size = load_ramdisk_as(info->initrd_filename, + info->initrd_start, + info->ram_size - info->initrd_start, + as); if (initrd_size < 0) { - initrd_size = load_image_targphys(info->initrd_filename, - info->initrd_start, - info->ram_size - - info->initrd_start); + initrd_size = load_image_targphys_as(info->initrd_filename, + info->initrd_start, + info->ram_size - + info->initrd_start, + as); } if (initrd_size < 0) { error_report("could not load initrd '%s'", @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) /* Place the DTB after the initrd in memory with alignment. */ dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, align); - if (load_dtb(dtb_start, info, 0) < 0) { + if (load_dtb(dtb_start, info, 0, as) < 0) { exit(1); } fixupcontext[FIXUP_ARGPTR] = dtb_start; @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) fixupcontext[FIXUP_ENTRYPOINT] = entry; write_bootloader("bootloader", info->loader_start, - primary_loader, fixupcontext); + primary_loader, fixupcontext, as); if (info->nb_cpus > 1) { info->write_secondary_boot(cpu, info); -- 2.16.2 Instead of loading guest images to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-4-peter.maydell@linaro.org --- hw/arm/armv7m.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) uint64_t entry; uint64_t lowaddr; int big_endian; + AddressSpace *as; + int asidx; + CPUState *cs = CPU(cpu); #ifdef TARGET_WORDS_BIGENDIAN big_endian = 1; @@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) exit(1); } + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + asidx = ARMASIdx_S; + } else { + asidx = ARMASIdx_NS; + } + as = cpu_get_address_space(cs, asidx); + if (kernel_filename) { - image_size = load_elf(kernel_filename, NULL, NULL, &entry, &lowaddr, - NULL, big_endian, EM_ARM, 1, 0); + image_size = load_elf_as(kernel_filename, NULL, NULL, &entry, &lowaddr, + NULL, big_endian, EM_ARM, 1, 0, as); if (image_size < 0) { - image_size = load_image_targphys(kernel_filename, 0, mem_size); + image_size = load_image_targphys_as(kernel_filename, 0, + mem_size, as); lowaddr = 0; } if (image_size < 0) { -- 2.16.2 In v8M, the Implementation Defined Attribution Unit (IDAU) is a small piece of hardware typically implemented in the SoC which provides board or SoC specific security attribution information for each address that the CPU performs MPU/SAU checks on. For QEMU, we model this with a QOM interface which is implemented by the board or SoC object and connected to the CPU using a link property. This commit defines the new interface class, adds the link property to the CPU object, and makes the SAU checking code call the IDAU interface if one is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-5-peter.maydell@linaro.org --- target/arm/cpu.h | 3 +++ target/arm/idau.h | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 15 +++++++++++++ target/arm/helper.c | 28 +++++++++++++++++++++--- 4 files changed, 104 insertions(+), 3 deletions(-) create mode 100644 target/arm/idau.h diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* MemoryRegion to use for secure physical accesses */ MemoryRegion *secure_memory; + /* For v8M, pointer to the IDAU interface provided by board/SoC */ + Object *idau; + /* 'compatible' string for this CPU for Linux device trees */ const char *dtb_compatible; diff --git a/target/arm/idau.h b/target/arm/idau.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/idau.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU ARM CPU -- interface for the Arm v8M IDAU + * + * Copyright (c) 2018 Linaro Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * In the v8M architecture, the IDAU is a small piece of hardware + * typically implemented in the SoC which provides board or SoC + * specific security attribution information for each address that + * the CPU performs MPU/SAU checks on. For QEMU, we model this with a + * QOM interface which is implemented by the board or SoC object and + * connected to the CPU using a link property. + */ + +#ifndef TARGET_ARM_IDAU_H +#define TARGET_ARM_IDAU_H + +#include "qom/object.h" + +#define TYPE_IDAU_INTERFACE "idau-interface" +#define IDAU_INTERFACE(obj) \ + INTERFACE_CHECK(IDAUInterface, (obj), TYPE_IDAU_INTERFACE) +#define IDAU_INTERFACE_CLASS(class) \ + OBJECT_CLASS_CHECK(IDAUInterfaceClass, (class), TYPE_IDAU_INTERFACE) +#define IDAU_INTERFACE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(IDAUInterfaceClass, (obj), TYPE_IDAU_INTERFACE) + +typedef struct IDAUInterface { + Object parent; +} IDAUInterface; + +#define IREGION_NOTVALID -1 + +typedef struct IDAUInterfaceClass { + InterfaceClass parent; + + /* Check the specified address and return the IDAU security information + * for it by filling in iregion, exempt, ns and nsc: + * iregion: IDAU region number, or IREGION_NOTVALID if not valid + * exempt: true if address is exempt from security attribution + * ns: true if the address is NonSecure + * nsc: true if the address is NonSecure-callable + */ + void (*check)(IDAUInterface *ii, uint32_t address, int *iregion, + bool *exempt, bool *ns, bool *nsc); +} IDAUInterfaceClass; + +#endif diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "target/arm/idau.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) } } + if (arm_feature(&cpu->env, ARM_FEATURE_M_SECURITY)) { + object_property_add_link(obj, "idau", TYPE_IDAU_INTERFACE, &cpu->idau, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + } + qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, &error_abort); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo arm_cpu_type_info = { .class_init = arm_cpu_class_init, }; +static const TypeInfo idau_interface_type_info = { + .name = TYPE_IDAU_INTERFACE, + .parent = TYPE_INTERFACE, + .class_size = sizeof(IDAUInterfaceClass), +}; + static void arm_cpu_register_types(void) { const ARMCPUInfo *info = arm_cpus; type_register_static(&arm_cpu_type_info); + type_register_static(&idau_interface_type_info); while (info->name) { cpu_register(info); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" +#include "target/arm/idau.h" #include "trace.h" #include "cpu.h" #include "internals.h" @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, */ ARMCPU *cpu = arm_env_get_cpu(env); int r; + bool idau_exempt = false, idau_ns = true, idau_nsc = true; + int idau_region = IREGION_NOTVALID; - /* TODO: implement IDAU */ + if (cpu->idau) { + IDAUInterfaceClass *iic = IDAU_INTERFACE_GET_CLASS(cpu->idau); + IDAUInterface *ii = IDAU_INTERFACE(cpu->idau); + + iic->check(ii, address, &idau_region, &idau_exempt, &idau_ns, + &idau_nsc); + } if (access_type == MMU_INST_FETCH && extract32(address, 28, 4) == 0xf) { /* 0xf0000000..0xffffffff is always S for insn fetches */ return; } - if (v8m_is_sau_exempt(env, address, access_type)) { + if (idau_exempt || v8m_is_sau_exempt(env, address, access_type)) { sattrs->ns = !regime_is_secure(env, mmu_idx); return; } + if (idau_region != IREGION_NOTVALID) { + sattrs->irvalid = true; + sattrs->iregion = idau_region; + } + switch (env->sau.ctrl & 3) { case 0: /* SAU.ENABLE == 0, SAU.ALLNS == 0 */ break; @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, } } - /* TODO when we support the IDAU then it may override the result here */ + /* The IDAU will override the SAU lookup results if it specifies + * higher security than the SAU does. + */ + if (!idau_ns) { + if (sattrs->ns || (!idau_nsc && sattrs->nsc)) { + sattrs->ns = false; + sattrs->nsc = idau_nsc; + } + } break; } } -- 2.16.2 Create an "idau" property on the armv7m container object which we can forward to the CPU object. Annoyingly, we can't use object_property_add_alias() because the CPU object we want to forward to doesn't exist until the armv7m container is realized. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-6-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 3 +++ hw/arm/armv7m.c | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/intc/armv7m_nvic.h" +#include "target/arm/idau.h" #define TYPE_BITBAND "ARM,bitband-memory" #define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) @@ -XXX,XX +XXX,XX @@ typedef struct { * + Property "memory": MemoryRegion defining the physical address space * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) + * + Property "idau": IDAU interface (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { char *cpu_type; /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; + Object *idau; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "qemu/error-report.h" #include "exec/address-spaces.h" +#include "target/arm/idau.h" /* Bitbanded IO. Each word corresponds to a single bit. */ @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory", &error_abort); + if (object_property_find(OBJECT(s->cpu), "idau", NULL)) { + object_property_set_link(OBJECT(s->cpu), s->idau, "idau", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_STRING("cpu-type", ARMv7MState, cpu_type), DEFINE_PROP_LINK("memory", ARMv7MState, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), DEFINE_PROP_END_OF_LIST(), }; -- 2.16.2 The Cortex-M33 allows the system to specify the reset value of the secure Vector Table Offset Register (VTOR) by asserting config signals. In particular, guest images for the MPS2 AN505 board rely on the MPS2's initial VTOR being correct for that board. Implement a QEMU property so board and SoC code can set the reset value to the correct value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-7-peter.maydell@linaro.org --- target/arm/cpu.h | 3 +++ target/arm/cpu.c | 18 ++++++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { */ uint32_t psci_conduit; + /* For v8M, initial value of the Secure VTOR */ + uint32_t init_svtor; + /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type. */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) uint32_t initial_msp; /* Loaded from 0x0 */ uint32_t initial_pc; /* Loaded from 0x4 */ uint8_t *rom; + uint32_t vecbase; if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { env->v7m.secure = true; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; - /* Load the initial SP and PC from the vector table at address 0 */ - rom = rom_ptr(0); + env->v7m.vecbase[M_REG_S] = cpu->init_svtor & 0xffffff80; + + /* Load the initial SP and PC from offset 0 and 4 in the vector table */ + vecbase = env->v7m.vecbase[env->v7m.secure]; + rom = rom_ptr(vecbase); if (rom) { /* Address zero is covered by ROM which hasn't yet been * copied into physical memory. @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) * it got copied into memory. In the latter case, rom_ptr * will return a NULL pointer and we should use ldl_phys instead. */ - initial_msp = ldl_phys(s->as, 0); - initial_pc = ldl_phys(s->as, 4); + initial_msp = ldl_phys(s->as, vecbase); + initial_pc = ldl_phys(s->as, vecbase + 4); } env->regs[13] = initial_msp & 0xFFFFFFFC; @@ -XXX,XX +XXX,XX @@ static Property arm_cpu_pmsav7_dregion_property = pmsav7_dregion, qdev_prop_uint32, uint32_t); +/* M profile: initial value of the Secure VTOR */ +static Property arm_cpu_initsvtor_property = + DEFINE_PROP_UINT32("init-svtor", ARMCPU, init_svtor, 0); + static void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) qdev_prop_allow_set_link_before_realize, OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort); + qdev_property_add_static(DEVICE(obj), &arm_cpu_initsvtor_property, + &error_abort); } qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, -- 2.16.2 Create an "init-svtor" property on the armv7m container object which we can forward to the CPU object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-8-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 2 ++ hw/arm/armv7m.c | 9 +++++++++ 2 files changed, 11 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) * + Property "idau": IDAU interface (forwarded to CPU object) + * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; Object *idau; + uint32_t init_svtor; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } } + if (object_property_find(OBJECT(s->cpu), "init-svtor", NULL)) { + object_property_set_uint(OBJECT(s->cpu), s->init_svtor, + "init-svtor", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_LINK("memory", ARMv7MState, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), + DEFINE_PROP_UINT32("init-svtor", ARMv7MState, init_svtor, 0), DEFINE_PROP_END_OF_LIST(), }; -- 2.16.2 Add a Cortex-M33 definition. The M33 is an M profile CPU which implements the ARM v8M architecture, including the M profile Security Extension. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-9-peter.maydell@linaro.org --- target/arm/cpu.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) cpu->id_isar5 = 0x00000000; } +static void cortex_m33_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd213; /* r0p3 */ + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + cpu->id_pfr0 = 0x00000030; + cpu->id_pfr1 = 0x00000210; + cpu->id_dfr0 = 0x00200000; + cpu->id_afr0 = 0x00000000; + cpu->id_mmfr0 = 0x00101F40; + cpu->id_mmfr1 = 0x00000000; + cpu->id_mmfr2 = 0x01000000; + cpu->id_mmfr3 = 0x00000000; + cpu->id_isar0 = 0x01101110; + cpu->id_isar1 = 0x02212000; + cpu->id_isar2 = 0x20232232; + cpu->id_isar3 = 0x01111131; + cpu->id_isar4 = 0x01310132; + cpu->id_isar5 = 0x00000000; + cpu->clidr = 0x00000000; + cpu->ctr = 0x8000c000; +} + static void arm_v7m_class_init(ObjectClass *oc, void *data) { CPUClass *cc = CPU_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m4", .initfn = cortex_m4_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m33", .initfn = cortex_m33_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-a7", .initfn = cortex_a7_initfn }, { .name = "cortex-a8", .initfn = cortex_a8_initfn }, -- 2.16.2 Move the definition of the struct for the unimplemented-device from unimp.c to unimp.h, so that users can embed the struct in their own device structs if they prefer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-10-peter.maydell@linaro.org --- include/hw/misc/unimp.h | 10 ++++++++++ hw/misc/unimp.c | 10 ---------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/include/hw/misc/unimp.h b/include/hw/misc/unimp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/unimp.h +++ b/include/hw/misc/unimp.h @@ -XXX,XX +XXX,XX @@ #define TYPE_UNIMPLEMENTED_DEVICE "unimplemented-device" +#define UNIMPLEMENTED_DEVICE(obj) \ + OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) + +typedef struct { + SysBusDevice parent_obj; + MemoryRegion iomem; + char *name; + uint64_t size; +} UnimplementedDeviceState; + /** * create_unimplemented_device: create and map a dummy device * @name: name of the device for debug logging diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qapi/error.h" -#define UNIMPLEMENTED_DEVICE(obj) \ - OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) - -typedef struct { - SysBusDevice parent_obj; - MemoryRegion iomem; - char *name; - uint64_t size; -} UnimplementedDeviceState; - static uint64_t unimp_read(void *opaque, hwaddr offset, unsigned size) { UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); -- 2.16.2 The or-irq.h header file is missing the customary guard against multiple inclusion, which means compilation fails if it gets included twice. Fix the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-11-peter.maydell@linaro.org --- include/hw/or-irq.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/hw/or-irq.h b/include/hw/or-irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/or-irq.h +++ b/include/hw/or-irq.h @@ -XXX,XX +XXX,XX @@ * THE SOFTWARE. */ +#ifndef HW_OR_IRQ_H +#define HW_OR_IRQ_H + #include "hw/irq.h" #include "hw/sysbus.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct OrIRQState { bool levels[MAX_OR_LINES]; uint16_t num_lines; }; + +#endif -- 2.16.2 The function qdev_init_gpio_in_named() passes the DeviceState pointer as the opaque data pointor for the irq handler function. Usually this is what you want, but in some cases it would be helpful to use some other data pointer. Add a new function qdev_init_gpio_in_named_with_opaque() which allows the caller to specify the data pointer they want. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-12-peter.maydell@linaro.org --- include/hw/qdev-core.h | 30 ++++++++++++++++++++++++++++-- hw/core/qdev.c | 8 +++++--- 2 files changed, 33 insertions(+), 5 deletions(-) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ BusState *qdev_get_child_bus(DeviceState *dev, const char *name); /* GPIO inputs also double as IRQ sinks. */ void qdev_init_gpio_in(DeviceState *dev, qemu_irq_handler handler, int n); void qdev_init_gpio_out(DeviceState *dev, qemu_irq *pins, int n); -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n); void qdev_init_gpio_out_named(DeviceState *dev, qemu_irq *pins, const char *name, int n); +/** + * qdev_init_gpio_in_named_with_opaque: create an array of input GPIO lines + * for the specified device + * + * @dev: Device to create input GPIOs for + * @handler: Function to call when GPIO line value is set + * @opaque: Opaque data pointer to pass to @handler + * @name: Name of the GPIO input (must be unique for this device) + * @n: Number of GPIO lines in this input set + */ +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n); + +/** + * qdev_init_gpio_in_named: create an array of input GPIO lines + * for the specified device + * + * Like qdev_init_gpio_in_named_with_opaque(), but the opaque pointer + * passed to the handler is @dev (which is the most commonly desired behaviour). + */ +static inline void qdev_init_gpio_in_named(DeviceState *dev, + qemu_irq_handler handler, + const char *name, int n) +{ + qdev_init_gpio_in_named_with_opaque(dev, handler, dev, name, n); +} void qdev_pass_gpios(DeviceState *dev, DeviceState *container, const char *name); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static NamedGPIOList *qdev_get_named_gpio_list(DeviceState *dev, return ngl; } -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n) +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n) { int i; NamedGPIOList *gpio_list = qdev_get_named_gpio_list(dev, name); assert(gpio_list->num_out == 0 || !name); gpio_list->in = qemu_extend_irqs(gpio_list->in, gpio_list->num_in, handler, - dev, n); + opaque, n); if (!name) { name = "unnamed-gpio-in"; -- 2.16.2 In some board or SoC models it is necessary to split a qemu_irq line so that one input can feed multiple outputs. We currently have qemu_irq_split() for this, but that has several deficiencies: * it can only handle splitting a line into two * it unavoidably leaks memory, so it can't be used in a device that can be deleted Implement a qdev device that encapsulates splitting of IRQs, with a configurable number of outputs. (This is in some ways the inverse of the TYPE_OR_IRQ device.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-13-peter.maydell@linaro.org --- hw/core/Makefile.objs | 1 + include/hw/core/split-irq.h | 57 +++++++++++++++++++++++++++++ include/hw/irq.h | 4 +- hw/core/split-irq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 150 insertions(+), 1 deletion(-) create mode 100644 include/hw/core/split-irq.h create mode 100644 hw/core/split-irq.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_FITLOADER) += loader-fit.o common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o common-obj-$(CONFIG_SOFTMMU) += register.o common-obj-$(CONFIG_SOFTMMU) += or-irq.o +common-obj-$(CONFIG_SOFTMMU) += split-irq.o common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o obj-$(CONFIG_SOFTMMU) += generic-loader.o diff --git a/include/hw/core/split-irq.h b/include/hw/core/split-irq.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/core/split-irq.h @@ -XXX,XX +XXX,XX @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* This is a simple device which has one GPIO input line and multiple + * GPIO output lines. Any change on the input line is forwarded to all + * of the outputs. + * + * QEMU interface: + * + one unnamed GPIO input: the input line + * + N unnamed GPIO outputs: the output lines + * + QOM property "num-lines": sets the number of output lines + */ +#ifndef HW_SPLIT_IRQ_H +#define HW_SPLIT_IRQ_H + +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_SPLIT_IRQ "split-irq" + +#define MAX_SPLIT_LINES 16 + +typedef struct SplitIRQ SplitIRQ; + +#define SPLIT_IRQ(obj) OBJECT_CHECK(SplitIRQ, (obj), TYPE_SPLIT_IRQ) + +struct SplitIRQ { + DeviceState parent_obj; + + qemu_irq out_irq[MAX_SPLIT_LINES]; + uint16_t num_lines; +}; + +#endif diff --git a/include/hw/irq.h b/include/hw/irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/irq.h +++ b/include/hw/irq.h @@ -XXX,XX +XXX,XX @@ void qemu_free_irq(qemu_irq irq); /* Returns a new IRQ with opposite polarity. */ qemu_irq qemu_irq_invert(qemu_irq irq); -/* Returns a new IRQ which feeds into both the passed IRQs */ +/* Returns a new IRQ which feeds into both the passed IRQs. + * It's probably better to use the TYPE_SPLIT_IRQ device instead. + */ qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2); /* Returns a new IRQ set which connects 1:1 to another IRQ set, which diff --git a/hw/core/split-irq.c b/hw/core/split-irq.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/split-irq.c @@ -XXX,XX +XXX,XX @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/core/split-irq.h" +#include "qapi/error.h" + +static void split_irq_handler(void *opaque, int n, int level) +{ + SplitIRQ *s = SPLIT_IRQ(opaque); + int i; + + for (i = 0; i < s->num_lines; i++) { + qemu_set_irq(s->out_irq[i], level); + } +} + +static void split_irq_init(Object *obj) +{ + qdev_init_gpio_in(DEVICE(obj), split_irq_handler, 1); +} + +static void split_irq_realize(DeviceState *dev, Error **errp) +{ + SplitIRQ *s = SPLIT_IRQ(dev); + + if (s->num_lines < 1 || s->num_lines >= MAX_SPLIT_LINES) { + error_setg(errp, + "IRQ splitter number of lines %d is not between 1 and %d", + s->num_lines, MAX_SPLIT_LINES); + return; + } + + qdev_init_gpio_out(dev, s->out_irq, s->num_lines); +} + +static Property split_irq_properties[] = { + DEFINE_PROP_UINT16("num-lines", SplitIRQ, num_lines, 1), + DEFINE_PROP_END_OF_LIST(), +}; + +static void split_irq_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + /* No state to reset or migrate */ + dc->props = split_irq_properties; + dc->realize = split_irq_realize; + + /* Reason: Needs to be wired up to work */ + dc->user_creatable = false; +} + +static const TypeInfo split_irq_type_info = { + .name = TYPE_SPLIT_IRQ, + .parent = TYPE_DEVICE, + .instance_size = sizeof(SplitIRQ), + .instance_init = split_irq_init, + .class_init = split_irq_class_init, +}; + +static void split_irq_register_types(void) +{ + type_register_static(&split_irq_type_info); +} + +type_init(split_irq_register_types) -- 2.16.2 The MPS2 AN505 FPGA image includes a "FPGA control block" which is a small set of registers handling LEDs, buttons and some counters. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-14-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/mps2-fpgaio.h | 43 ++++++++++ hw/misc/mps2-fpgaio.c | 176 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 6 ++ 5 files changed, 227 insertions(+) create mode 100644 include/hw/misc/mps2-fpgaio.h create mode 100644 hw/misc/mps2-fpgaio.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_STM32F2XX_SYSCFG) += stm32f2xx_syscfg.o obj-$(CONFIG_MIPS_CPS) += mips_cmgcr.o obj-$(CONFIG_MIPS_CPS) += mips_cpc.o obj-$(CONFIG_MIPS_ITU) += mips_itu.o +obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o obj-$(CONFIG_PVPANIC) += pvpanic.o diff --git a/include/hw/misc/mps2-fpgaio.h b/include/hw/misc/mps2-fpgaio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/mps2-fpgaio.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM MPS2 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the FPGAIO register block in the AN505 + * FPGA image for the MPS2 dev board; it is documented in the + * application note: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * QEMU interface: + * + sysbus MMIO region 0: the register bank + */ + +#ifndef MPS2_FPGAIO_H +#define MPS2_FPGAIO_H + +#include "hw/sysbus.h" + +#define TYPE_MPS2_FPGAIO "mps2-fpgaio" +#define MPS2_FPGAIO(obj) OBJECT_CHECK(MPS2FPGAIO, (obj), TYPE_MPS2_FPGAIO) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t led0; + uint32_t prescale; + uint32_t misc; + + uint32_t prescale_clk; +} MPS2FPGAIO; + +#endif diff --git a/hw/misc/mps2-fpgaio.c b/hw/misc/mps2-fpgaio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/mps2-fpgaio.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM MPS2 AN505 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the "FPGA system control and I/O" block found + * in the AN505 FPGA image for the MPS2 devboard. + * It is documented in AN505: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/mps2-fpgaio.h" + +REG32(LED0, 0) +REG32(BUTTON, 8) +REG32(CLK1HZ, 0x10) +REG32(CLK100HZ, 0x14) +REG32(COUNTER, 0x18) +REG32(PRESCALE, 0x1c) +REG32(PSCNTR, 0x20) +REG32(MISC, 0x4c) + +static uint64_t mps2_fpgaio_read(void *opaque, hwaddr offset, unsigned size) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(opaque); + uint64_t r; + + switch (offset) { + case A_LED0: + r = s->led0; + break; + case A_BUTTON: + /* User-pressable board buttons. We don't model that, so just return + * zeroes. + */ + r = 0; + break; + case A_PRESCALE: + r = s->prescale; + break; + case A_MISC: + r = s->misc; + break; + case A_CLK1HZ: + case A_CLK100HZ: + case A_COUNTER: + case A_PSCNTR: + /* These are all upcounters of various frequencies. */ + qemu_log_mask(LOG_UNIMP, "MPS2 FPGAIO: counters unimplemented\n"); + r = 0; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "MPS2 FPGAIO read: bad offset %x\n", (int) offset); + r = 0; + break; + } + + trace_mps2_fpgaio_read(offset, r, size); + return r; +} + +static void mps2_fpgaio_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(opaque); + + trace_mps2_fpgaio_write(offset, value, size); + + switch (offset) { + case A_LED0: + /* LED bits [1:0] control board LEDs. We don't currently have + * a mechanism for displaying this graphically, so use a trace event. + */ + trace_mps2_fpgaio_leds(value & 0x02 ? '*' : '.', + value & 0x01 ? '*' : '.'); + s->led0 = value & 0x3; + break; + case A_PRESCALE: + s->prescale = value; + break; + case A_MISC: + /* These are control bits for some of the other devices on the + * board (SPI, CLCD, etc). We don't implement that yet, so just + * make the bits read as written. + */ + qemu_log_mask(LOG_UNIMP, + "MPS2 FPGAIO: MISC control bits unimplemented\n"); + s->misc = value; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "MPS2 FPGAIO write: bad offset 0x%x\n", (int) offset); + break; + } +} + +static const MemoryRegionOps mps2_fpgaio_ops = { + .read = mps2_fpgaio_read, + .write = mps2_fpgaio_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void mps2_fpgaio_reset(DeviceState *dev) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(dev); + + trace_mps2_fpgaio_reset(); + s->led0 = 0; + s->prescale = 0; + s->misc = 0; +} + +static void mps2_fpgaio_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + MPS2FPGAIO *s = MPS2_FPGAIO(obj); + + memory_region_init_io(&s->iomem, obj, &mps2_fpgaio_ops, s, + "mps2-fpgaio", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription mps2_fpgaio_vmstate = { + .name = "mps2-fpgaio", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(led0, MPS2FPGAIO), + VMSTATE_UINT32(prescale, MPS2FPGAIO), + VMSTATE_UINT32(misc, MPS2FPGAIO), + VMSTATE_END_OF_LIST() + } +}; + +static Property mps2_fpgaio_properties[] = { + /* Frequency of the prescale counter */ + DEFINE_PROP_UINT32("prescale-clk", MPS2FPGAIO, prescale_clk, 20000000), + DEFINE_PROP_END_OF_LIST(), +}; + +static void mps2_fpgaio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &mps2_fpgaio_vmstate; + dc->reset = mps2_fpgaio_reset; + dc->props = mps2_fpgaio_properties; +} + +static const TypeInfo mps2_fpgaio_info = { + .name = TYPE_MPS2_FPGAIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MPS2FPGAIO), + .instance_init = mps2_fpgaio_init, + .class_init = mps2_fpgaio_class_init, +}; + +static void mps2_fpgaio_register_types(void) +{ + type_register_static(&mps2_fpgaio_info); +} + +type_init(mps2_fpgaio_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_STM32F205_SOC=y CONFIG_CMSDK_APB_TIMER=y CONFIG_CMSDK_APB_UART=y +CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_VERSATILE_PCI=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32 mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32 +# hw/misc/mps2_fpgaio.c +mps2_fpgaio_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +mps2_fpgaio_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +mps2_fpgaio_reset(void) "MPS2 FPGAIO: reset" +mps2_fpgaio_leds(char led1, char led0) "MPS2 FPGAIO LEDs: %c%c" + # hw/misc/msf2-sysreg.c msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" HWADDR_PRIx " data 0x%" PRIx32 " prev 0x%" PRIx32 msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" HWADDR_PRIx " data 0x%08" PRIx32 -- 2.16.2 Add a model of the TrustZone peripheral protection controller (PPC), which is used to gate transactions to non-TZ-aware peripherals so that secure software can configure them to not be accessible to non-secure software. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-15-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 2 + include/hw/misc/tz-ppc.h | 101 ++++++++++++++ hw/misc/tz-ppc.c | 302 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 2 + hw/misc/trace-events | 11 ++ 5 files changed, 418 insertions(+) create mode 100644 include/hw/misc/tz-ppc.h create mode 100644 hw/misc/tz-ppc.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MIPS_ITU) += mips_itu.o obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o +obj-$(CONFIG_TZ_PPC) += tz-ppc.o + obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o obj-$(CONFIG_AUX) += auxbus.o diff --git a/include/hw/misc/tz-ppc.h b/include/hw/misc/tz-ppc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/tz-ppc.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the TrustZone peripheral protection controller (PPC). + * It is documented in the ARM CoreLink SIE-200 System IP for Embedded TRM + * (DDI 0571G): + * https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g + * + * The PPC sits in front of peripherals and allows secure software to + * configure it to either pass through or reject transactions. + * Rejected transactions may be configured to either be aborted, or to + * behave as RAZ/WI. An interrupt can be signalled for a rejected transaction. + * + * The PPC has no register interface -- it is configured purely by a + * collection of input signals from other hardware in the system. Typically + * they are either hardwired or exposed in an ad-hoc register interface by + * the SoC that uses the PPC. + * + * This QEMU model can be used to model either the AHB5 or APB4 TZ PPC, + * since the only difference between them is that the AHB version has a + * "default" port which has no security checks applied. In QEMU the default + * port can be emulated simply by wiring its downstream devices directly + * into the parent address space, since the PPC does not need to intercept + * transactions there. + * + * In the hardware, selection of which downstream port to use is done by + * the user's decode logic asserting one of the hsel[] signals. In QEMU, + * we provide 16 MMIO regions, one per port, and the user maps these into + * the desired addresses to implement the address decode. + * + * QEMU interface: + * + sysbus MMIO regions 0..15: MemoryRegions defining the upstream end + * of each of the 16 ports of the PPC + * + Property "port[0..15]": MemoryRegion defining the downstream device(s) + * for each of the 16 ports of the PPC + * + Named GPIO inputs "cfg_nonsec[0..15]": set to 1 if the port should be + * accessible to NonSecure transactions + * + Named GPIO inputs "cfg_ap[0..15]": set to 1 if the port should be + * accessible to non-privileged transactions + * + Named GPIO input "cfg_sec_resp": set to 1 if a rejected transaction should + * result in a transaction error, or 0 for the transaction to RAZ/WI + * + Named GPIO input "irq_enable": set to 1 to enable interrupts + * + Named GPIO input "irq_clear": set to 1 to clear a pending interrupt + * + Named GPIO output "irq": set for a transaction-failed interrupt + * + Property "NONSEC_MASK": if a bit is set in this mask then accesses to + * the associated port do not have the TZ security check performed. (This + * corresponds to the hardware allowing this to be set as a Verilog + * parameter.) + */ + +#ifndef TZ_PPC_H +#define TZ_PPC_H + +#include "hw/sysbus.h" + +#define TYPE_TZ_PPC "tz-ppc" +#define TZ_PPC(obj) OBJECT_CHECK(TZPPC, (obj), TYPE_TZ_PPC) + +#define TZ_NUM_PORTS 16 + +typedef struct TZPPC TZPPC; + +typedef struct TZPPCPort { + TZPPC *ppc; + MemoryRegion upstream; + AddressSpace downstream_as; + MemoryRegion *downstream; +} TZPPCPort; + +struct TZPPC { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + /* State: these just track the values of our input signals */ + bool cfg_nonsec[TZ_NUM_PORTS]; + bool cfg_ap[TZ_NUM_PORTS]; + bool cfg_sec_resp; + bool irq_enable; + bool irq_clear; + /* State: are we asserting irq ? */ + bool irq_status; + + qemu_irq irq; + + /* Properties */ + uint32_t nonsec_mask; + + TZPPCPort port[TZ_NUM_PORTS]; +}; + +#endif diff --git a/hw/misc/tz-ppc.c b/hw/misc/tz-ppc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/tz-ppc.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/tz-ppc.h" + +static void tz_ppc_update_irq(TZPPC *s) +{ + bool level = s->irq_status && s->irq_enable; + + trace_tz_ppc_update_irq(level); + qemu_set_irq(s->irq, level); +} + +static void tz_ppc_cfg_nonsec(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + assert(n < TZ_NUM_PORTS); + trace_tz_ppc_cfg_nonsec(n, level); + s->cfg_nonsec[n] = level; +} + +static void tz_ppc_cfg_ap(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + assert(n < TZ_NUM_PORTS); + trace_tz_ppc_cfg_ap(n, level); + s->cfg_ap[n] = level; +} + +static void tz_ppc_cfg_sec_resp(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_cfg_sec_resp(level); + s->cfg_sec_resp = level; +} + +static void tz_ppc_irq_enable(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_irq_enable(level); + s->irq_enable = level; + tz_ppc_update_irq(s); +} + +static void tz_ppc_irq_clear(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_irq_clear(level); + + s->irq_clear = level; + if (level) { + s->irq_status = false; + tz_ppc_update_irq(s); + } +} + +static bool tz_ppc_check(TZPPC *s, int n, MemTxAttrs attrs) +{ + /* Check whether to allow an access to port n; return true if + * the check passes, and false if the transaction must be blocked. + * If the latter, the caller must check cfg_sec_resp to determine + * whether to abort or RAZ/WI the transaction. + * The checks are: + * + nonsec_mask suppresses any check of the secure attribute + * + otherwise, block if cfg_nonsec is 1 and transaction is secure, + * or if cfg_nonsec is 0 and transaction is non-secure + * + block if transaction is usermode and cfg_ap is 0 + */ + if ((attrs.secure == s->cfg_nonsec[n] && !(s->nonsec_mask & (1 << n))) || + (attrs.user && !s->cfg_ap[n])) { + /* Block the transaction. */ + if (!s->irq_clear) { + /* Note that holding irq_clear high suppresses interrupts */ + s->irq_status = true; + tz_ppc_update_irq(s); + } + return false; + } + return true; +} + +static MemTxResult tz_ppc_read(void *opaque, hwaddr addr, uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + TZPPCPort *p = opaque; + TZPPC *s = p->ppc; + int n = p - s->port; + AddressSpace *as = &p->downstream_as; + uint64_t data; + MemTxResult res; + + if (!tz_ppc_check(s, n, attrs)) { + trace_tz_ppc_read_blocked(n, addr, attrs.secure, attrs.user); + if (s->cfg_sec_resp) { + return MEMTX_ERROR; + } else { + *pdata = 0; + return MEMTX_OK; + } + } + + switch (size) { + case 1: + data = address_space_ldub(as, addr, attrs, &res); + break; + case 2: + data = address_space_lduw_le(as, addr, attrs, &res); + break; + case 4: + data = address_space_ldl_le(as, addr, attrs, &res); + break; + case 8: + data = address_space_ldq_le(as, addr, attrs, &res); + break; + default: + g_assert_not_reached(); + } + *pdata = data; + return res; +} + +static MemTxResult tz_ppc_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size, MemTxAttrs attrs) +{ + TZPPCPort *p = opaque; + TZPPC *s = p->ppc; + AddressSpace *as = &p->downstream_as; + int n = p - s->port; + MemTxResult res; + + if (!tz_ppc_check(s, n, attrs)) { + trace_tz_ppc_write_blocked(n, addr, attrs.secure, attrs.user); + if (s->cfg_sec_resp) { + return MEMTX_ERROR; + } else { + return MEMTX_OK; + } + } + + switch (size) { + case 1: + address_space_stb(as, addr, val, attrs, &res); + break; + case 2: + address_space_stw_le(as, addr, val, attrs, &res); + break; + case 4: + address_space_stl_le(as, addr, val, attrs, &res); + break; + case 8: + address_space_stq_le(as, addr, val, attrs, &res); + break; + default: + g_assert_not_reached(); + } + return res; +} + +static const MemoryRegionOps tz_ppc_ops = { + .read_with_attrs = tz_ppc_read, + .write_with_attrs = tz_ppc_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void tz_ppc_reset(DeviceState *dev) +{ + TZPPC *s = TZ_PPC(dev); + + trace_tz_ppc_reset(); + s->cfg_sec_resp = false; + memset(s->cfg_nonsec, 0, sizeof(s->cfg_nonsec)); + memset(s->cfg_ap, 0, sizeof(s->cfg_ap)); +} + +static void tz_ppc_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + TZPPC *s = TZ_PPC(obj); + + qdev_init_gpio_in_named(dev, tz_ppc_cfg_nonsec, "cfg_nonsec", TZ_NUM_PORTS); + qdev_init_gpio_in_named(dev, tz_ppc_cfg_ap, "cfg_ap", TZ_NUM_PORTS); + qdev_init_gpio_in_named(dev, tz_ppc_cfg_sec_resp, "cfg_sec_resp", 1); + qdev_init_gpio_in_named(dev, tz_ppc_irq_enable, "irq_enable", 1); + qdev_init_gpio_in_named(dev, tz_ppc_irq_clear, "irq_clear", 1); + qdev_init_gpio_out_named(dev, &s->irq, "irq", 1); +} + +static void tz_ppc_realize(DeviceState *dev, Error **errp) +{ + Object *obj = OBJECT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + TZPPC *s = TZ_PPC(dev); + int i; + + /* We can't create the upstream end of the port until realize, + * as we don't know the size of the MR used as the downstream until then. + */ + for (i = 0; i < TZ_NUM_PORTS; i++) { + TZPPCPort *port = &s->port[i]; + char *name; + uint64_t size; + + if (!port->downstream) { + continue; + } + + name = g_strdup_printf("tz-ppc-port[%d]", i); + + port->ppc = s; + address_space_init(&port->downstream_as, port->downstream, name); + + size = memory_region_size(port->downstream); + memory_region_init_io(&port->upstream, obj, &tz_ppc_ops, + port, name, size); + sysbus_init_mmio(sbd, &port->upstream); + g_free(name); + } +} + +static const VMStateDescription tz_ppc_vmstate = { + .name = "tz-ppc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_BOOL_ARRAY(cfg_nonsec, TZPPC, 16), + VMSTATE_BOOL_ARRAY(cfg_ap, TZPPC, 16), + VMSTATE_BOOL(cfg_sec_resp, TZPPC), + VMSTATE_BOOL(irq_enable, TZPPC), + VMSTATE_BOOL(irq_clear, TZPPC), + VMSTATE_BOOL(irq_status, TZPPC), + VMSTATE_END_OF_LIST() + } +}; + +#define DEFINE_PORT(N) \ + DEFINE_PROP_LINK("port[" #N "]", TZPPC, port[N].downstream, \ + TYPE_MEMORY_REGION, MemoryRegion *) + +static Property tz_ppc_properties[] = { + DEFINE_PROP_UINT32("NONSEC_MASK", TZPPC, nonsec_mask, 0), + DEFINE_PORT(0), + DEFINE_PORT(1), + DEFINE_PORT(2), + DEFINE_PORT(3), + DEFINE_PORT(4), + DEFINE_PORT(5), + DEFINE_PORT(6), + DEFINE_PORT(7), + DEFINE_PORT(8), + DEFINE_PORT(9), + DEFINE_PORT(10), + DEFINE_PORT(11), + DEFINE_PORT(12), + DEFINE_PORT(13), + DEFINE_PORT(14), + DEFINE_PORT(15), + DEFINE_PROP_END_OF_LIST(), +}; + +static void tz_ppc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = tz_ppc_realize; + dc->vmsd = &tz_ppc_vmstate; + dc->reset = tz_ppc_reset; + dc->props = tz_ppc_properties; +} + +static const TypeInfo tz_ppc_info = { + .name = TYPE_TZ_PPC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(TZPPC), + .instance_init = tz_ppc_init, + .class_init = tz_ppc_class_init, +}; + +static void tz_ppc_register_types(void) +{ + type_register_static(&tz_ppc_info); +} + +type_init(tz_ppc_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_CMSDK_APB_UART=y CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y +CONFIG_TZ_PPC=y + CONFIG_VERSATILE_PCI=y CONFIG_VERSATILE_I2C=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mos6522_get_next_irq_time(uint16_t latch, int64_t d, int64_t delta) "latch=%d co mos6522_set_sr_int(void) "set sr_int" mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64 mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x" + +# hw/misc/tz-ppc.c +tz_ppc_reset(void) "TZ PPC: reset" +tz_ppc_cfg_nonsec(int n, int level) "TZ PPC: cfg_nonsec[%d] = %d" +tz_ppc_cfg_ap(int n, int level) "TZ PPC: cfg_ap[%d] = %d" +tz_ppc_cfg_sec_resp(int level) "TZ PPC: cfg_sec_resp = %d" +tz_ppc_irq_enable(int level) "TZ PPC: int_enable = %d" +tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d" +tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d" +tz_ppc_read_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " read (secure %d user %d) blocked" +tz_ppc_write_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " write (secure %d user %d) blocked" -- 2.16.2 The Arm IoT Kit includes a "security controller" which is largely a collection of registers for controlling the PPCs and other bits of glue in the system. This commit provides the initial skeleton of the device, implementing just the ID registers, and a couple of read-only read-as-zero registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-16-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/iotkit-secctl.h | 39 ++++ hw/misc/iotkit-secctl.c | 448 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 7 + 5 files changed, 496 insertions(+) create mode 100644 include/hw/misc/iotkit-secctl.h create mode 100644 hw/misc/iotkit-secctl.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o obj-$(CONFIG_TZ_PPC) += tz-ppc.o +obj-$(CONFIG_IOTKIT_SECCTL) += iotkit-secctl.o obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the security controller which is part of the + * Arm IoT Kit and documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * + * QEMU interface: + * + sysbus MMIO region 0 is the "secure privilege control block" registers + * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + */ + +#ifndef IOTKIT_SECCTL_H +#define IOTKIT_SECCTL_H + +#include "hw/sysbus.h" + +#define TYPE_IOTKIT_SECCTL "iotkit-secctl" +#define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) + +typedef struct IoTKitSecCtl { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + MemoryRegion s_regs; + MemoryRegion ns_regs; +} IoTKitSecCtl; + +#endif diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/iotkit-secctl.h" + +/* Registers in the secure privilege control block */ +REG32(SECRESPCFG, 0x10) +REG32(NSCCFG, 0x14) +REG32(SECMPCINTSTATUS, 0x1c) +REG32(SECPPCINTSTAT, 0x20) +REG32(SECPPCINTCLR, 0x24) +REG32(SECPPCINTEN, 0x28) +REG32(SECMSCINTSTAT, 0x30) +REG32(SECMSCINTCLR, 0x34) +REG32(SECMSCINTEN, 0x38) +REG32(BRGINTSTAT, 0x40) +REG32(BRGINTCLR, 0x44) +REG32(BRGINTEN, 0x48) +REG32(AHBNSPPC0, 0x50) +REG32(AHBNSPPCEXP0, 0x60) +REG32(AHBNSPPCEXP1, 0x64) +REG32(AHBNSPPCEXP2, 0x68) +REG32(AHBNSPPCEXP3, 0x6c) +REG32(APBNSPPC0, 0x70) +REG32(APBNSPPC1, 0x74) +REG32(APBNSPPCEXP0, 0x80) +REG32(APBNSPPCEXP1, 0x84) +REG32(APBNSPPCEXP2, 0x88) +REG32(APBNSPPCEXP3, 0x8c) +REG32(AHBSPPPC0, 0x90) +REG32(AHBSPPPCEXP0, 0xa0) +REG32(AHBSPPPCEXP1, 0xa4) +REG32(AHBSPPPCEXP2, 0xa8) +REG32(AHBSPPPCEXP3, 0xac) +REG32(APBSPPPC0, 0xb0) +REG32(APBSPPPC1, 0xb4) +REG32(APBSPPPCEXP0, 0xc0) +REG32(APBSPPPCEXP1, 0xc4) +REG32(APBSPPPCEXP2, 0xc8) +REG32(APBSPPPCEXP3, 0xcc) +REG32(NSMSCEXP, 0xd0) +REG32(PID4, 0xfd0) +REG32(PID5, 0xfd4) +REG32(PID6, 0xfd8) +REG32(PID7, 0xfdc) +REG32(PID0, 0xfe0) +REG32(PID1, 0xfe4) +REG32(PID2, 0xfe8) +REG32(PID3, 0xfec) +REG32(CID0, 0xff0) +REG32(CID1, 0xff4) +REG32(CID2, 0xff8) +REG32(CID3, 0xffc) + +/* Registers in the non-secure privilege control block */ +REG32(AHBNSPPPC0, 0x90) +REG32(AHBNSPPPCEXP0, 0xa0) +REG32(AHBNSPPPCEXP1, 0xa4) +REG32(AHBNSPPPCEXP2, 0xa8) +REG32(AHBNSPPPCEXP3, 0xac) +REG32(APBNSPPPC0, 0xb0) +REG32(APBNSPPPC1, 0xb4) +REG32(APBNSPPPCEXP0, 0xc0) +REG32(APBNSPPPCEXP1, 0xc4) +REG32(APBNSPPPCEXP2, 0xc8) +REG32(APBNSPPPCEXP3, 0xcc) +/* PID and CID registers are also present in the NS block */ + +static const uint8_t iotkit_secctl_s_idregs[] = { + 0x04, 0x00, 0x00, 0x00, + 0x52, 0xb8, 0x0b, 0x00, + 0x0d, 0xf0, 0x05, 0xb1, +}; + +static const uint8_t iotkit_secctl_ns_idregs[] = { + 0x04, 0x00, 0x00, 0x00, + 0x53, 0xb8, 0x0b, 0x00, + 0x0d, 0xf0, 0x05, 0xb1, +}; + +static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, + uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + uint64_t r; + uint32_t offset = addr & ~0x3; + + switch (offset) { + case A_AHBNSPPC0: + case A_AHBSPPPC0: + r = 0; + break; + case A_SECRESPCFG: + case A_NSCCFG: + case A_SECMPCINTSTATUS: + case A_SECPPCINTSTAT: + case A_SECPPCINTEN: + case A_SECMSCINTSTAT: + case A_SECMSCINTEN: + case A_BRGINTSTAT: + case A_BRGINTEN: + case A_AHBNSPPCEXP0: + case A_AHBNSPPCEXP1: + case A_AHBNSPPCEXP2: + case A_AHBNSPPCEXP3: + case A_APBNSPPC0: + case A_APBNSPPC1: + case A_APBNSPPCEXP0: + case A_APBNSPPCEXP1: + case A_APBNSPPCEXP2: + case A_APBNSPPCEXP3: + case A_AHBSPPPCEXP0: + case A_AHBSPPPCEXP1: + case A_AHBSPPPCEXP2: + case A_AHBSPPPCEXP3: + case A_APBSPPPC0: + case A_APBSPPPC1: + case A_APBSPPPCEXP0: + case A_APBSPPPCEXP1: + case A_APBSPPPCEXP2: + case A_APBSPPPCEXP3: + case A_NSMSCEXP: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl S block read: " + "unimplemented offset 0x%x\n", offset); + r = 0; + break; + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + r = iotkit_secctl_s_idregs[(offset - A_PID4) / 4]; + break; + case A_SECPPCINTCLR: + case A_SECMSCINTCLR: + case A_BRGINTCLR: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block read: write-only offset 0x%x\n", + offset); + r = 0; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block read: bad offset 0x%x\n", offset); + r = 0; + break; + } + + if (size != 4) { + /* None of our registers are access-sensitive, so just pull the right + * byte out of the word read result. + */ + r = extract32(r, (addr & 3) * 8, size * 8); + } + + trace_iotkit_secctl_s_read(offset, r, size); + *pdata = r; + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, + uint64_t value, + unsigned size, MemTxAttrs attrs) +{ + uint32_t offset = addr; + + trace_iotkit_secctl_s_write(offset, value, size); + + if (size != 4) { + /* Byte and halfword writes are ignored */ + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block write: bad size, ignored\n"); + return MEMTX_OK; + } + + switch (offset) { + case A_SECRESPCFG: + case A_NSCCFG: + case A_SECPPCINTCLR: + case A_SECPPCINTEN: + case A_SECMSCINTCLR: + case A_SECMSCINTEN: + case A_BRGINTCLR: + case A_BRGINTEN: + case A_AHBNSPPCEXP0: + case A_AHBNSPPCEXP1: + case A_AHBNSPPCEXP2: + case A_AHBNSPPCEXP3: + case A_APBNSPPC0: + case A_APBNSPPC1: + case A_APBNSPPCEXP0: + case A_APBNSPPCEXP1: + case A_APBNSPPCEXP2: + case A_APBNSPPCEXP3: + case A_AHBSPPPCEXP0: + case A_AHBSPPPCEXP1: + case A_AHBSPPPCEXP2: + case A_AHBSPPPCEXP3: + case A_APBSPPPC0: + case A_APBSPPPC1: + case A_APBSPPPCEXP0: + case A_APBSPPPCEXP1: + case A_APBSPPPCEXP2: + case A_APBSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl S block write: " + "unimplemented offset 0x%x\n", offset); + break; + case A_SECMPCINTSTATUS: + case A_SECPPCINTSTAT: + case A_SECMSCINTSTAT: + case A_BRGINTSTAT: + case A_AHBNSPPC0: + case A_AHBSPPPC0: + case A_NSMSCEXP: + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + qemu_log_mask(LOG_GUEST_ERROR, + "IoTKit SecCtl S block write: " + "read-only offset 0x%x\n", offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block write: bad offset 0x%x\n", + offset); + break; + } + + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, + uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + uint64_t r; + uint32_t offset = addr & ~0x3; + + switch (offset) { + case A_AHBNSPPPC0: + r = 0; + break; + case A_AHBNSPPPCEXP0: + case A_AHBNSPPPCEXP1: + case A_AHBNSPPPCEXP2: + case A_AHBNSPPPCEXP3: + case A_APBNSPPPC0: + case A_APBNSPPPC1: + case A_APBNSPPPCEXP0: + case A_APBNSPPPCEXP1: + case A_APBNSPPPCEXP2: + case A_APBNSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl NS block read: " + "unimplemented offset 0x%x\n", offset); + break; + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + r = iotkit_secctl_ns_idregs[(offset - A_PID4) / 4]; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad offset 0x%x\n", + offset); + r = 0; + break; + } + + if (size != 4) { + /* None of our registers are access-sensitive, so just pull the right + * byte out of the word read result. + */ + r = extract32(r, (addr & 3) * 8, size * 8); + } + + trace_iotkit_secctl_ns_read(offset, r, size); + *pdata = r; + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, + uint64_t value, + unsigned size, MemTxAttrs attrs) +{ + uint32_t offset = addr; + + trace_iotkit_secctl_ns_write(offset, value, size); + + if (size != 4) { + /* Byte and halfword writes are ignored */ + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad size, ignored\n"); + return MEMTX_OK; + } + + switch (offset) { + case A_AHBNSPPPCEXP0: + case A_AHBNSPPPCEXP1: + case A_AHBNSPPPCEXP2: + case A_AHBNSPPPCEXP3: + case A_APBNSPPPC0: + case A_APBNSPPPC1: + case A_APBNSPPPCEXP0: + case A_APBNSPPPCEXP1: + case A_APBNSPPPCEXP2: + case A_APBNSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl NS block write: " + "unimplemented offset 0x%x\n", offset); + break; + case A_AHBNSPPPC0: + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + qemu_log_mask(LOG_GUEST_ERROR, + "IoTKit SecCtl NS block write: " + "read-only offset 0x%x\n", offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad offset 0x%x\n", + offset); + break; + } + + return MEMTX_OK; +} + +static const MemoryRegionOps iotkit_secctl_s_ops = { + .read_with_attrs = iotkit_secctl_s_read, + .write_with_attrs = iotkit_secctl_s_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .impl.min_access_size = 1, + .impl.max_access_size = 4, +}; + +static const MemoryRegionOps iotkit_secctl_ns_ops = { + .read_with_attrs = iotkit_secctl_ns_read, + .write_with_attrs = iotkit_secctl_ns_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .impl.min_access_size = 1, + .impl.max_access_size = 4, +}; + +static void iotkit_secctl_reset(DeviceState *dev) +{ + +} + +static void iotkit_secctl_init(Object *obj) +{ + IoTKitSecCtl *s = IOTKIT_SECCTL(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, + s, "iotkit-secctl-s-regs", 0x1000); + memory_region_init_io(&s->ns_regs, obj, &iotkit_secctl_ns_ops, + s, "iotkit-secctl-ns-regs", 0x1000); + sysbus_init_mmio(sbd, &s->s_regs); + sysbus_init_mmio(sbd, &s->ns_regs); +} + +static const VMStateDescription iotkit_secctl_vmstate = { + .name = "iotkit-secctl", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_END_OF_LIST() + } +}; + +static void iotkit_secctl_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &iotkit_secctl_vmstate; + dc->reset = iotkit_secctl_reset; +} + +static const TypeInfo iotkit_secctl_info = { + .name = TYPE_IOTKIT_SECCTL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IoTKitSecCtl), + .instance_init = iotkit_secctl_init, + .class_init = iotkit_secctl_class_init, +}; + +static void iotkit_secctl_register_types(void) +{ + type_register_static(&iotkit_secctl_info); +} + +type_init(iotkit_secctl_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_TZ_PPC=y +CONFIG_IOTKIT_SECCTL=y CONFIG_VERSATILE_PCI=y CONFIG_VERSATILE_I2C=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d" tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d" tz_ppc_read_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " read (secure %d user %d) blocked" tz_ppc_write_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " write (secure %d user %d) blocked" + +# hw/misc/iotkit-secctl.c +iotkit_secctl_s_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs read: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_s_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs write: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_ns_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs read: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_ns_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs write: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_reset(void) "IoTKit SecCtl: reset" -- 2.16.2 The IoTKit Security Controller includes various registers that expose to software the controls for the Peripheral Protection Controllers in the system. Implement these. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-17-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 64 +++++++++- hw/misc/iotkit-secctl.c | 270 +++++++++++++++++++++++++++++++++++++--- 2 files changed, 315 insertions(+), 19 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + sysbus MMIO region 0 is the "secure privilege control block" registers * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses + * should RAZ/WI or bus error + * Controlling the 2 APB PPCs in the IoTKit: + * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec + * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap + * + named GPIO outputs apb_ppc{0,1}_irq_enable + * + named GPIO outputs apb_ppc{0,1}_irq_clear + * + named GPIO inputs apb_ppc{0,1}_irq_status + * Controlling each of the 4 expansion APB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status */ #ifndef IOTKIT_SECCTL_H @@ -XXX,XX +XXX,XX @@ #define TYPE_IOTKIT_SECCTL "iotkit-secctl" #define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) -typedef struct IoTKitSecCtl { +#define IOTS_APB_PPC0_NUM_PORTS 3 +#define IOTS_APB_PPC1_NUM_PORTS 1 +#define IOTS_PPC_NUM_PORTS 16 +#define IOTS_NUM_APB_PPC 2 +#define IOTS_NUM_APB_EXP_PPC 4 +#define IOTS_NUM_AHB_EXP_PPC 4 + +typedef struct IoTKitSecCtl IoTKitSecCtl; + +/* State and IRQ lines relating to a PPC. For the + * PPCs in the IoTKit not all the IRQ lines are used. + */ +typedef struct IoTKitSecCtlPPC { + qemu_irq nonsec[IOTS_PPC_NUM_PORTS]; + qemu_irq ap[IOTS_PPC_NUM_PORTS]; + qemu_irq irq_enable; + qemu_irq irq_clear; + + uint32_t ns; + uint32_t sp; + uint32_t nsp; + + /* Number of ports actually present */ + int numports; + /* Offset of this PPC's interrupt bits in SECPPCINTSTAT */ + int irq_bit_offset; + IoTKitSecCtl *parent; +} IoTKitSecCtlPPC; + +struct IoTKitSecCtl { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ + qemu_irq sec_resp_cfg; MemoryRegion s_regs; MemoryRegion ns_regs; -} IoTKitSecCtl; + + uint32_t secppcintstat; + uint32_t secppcinten; + uint32_t secrespcfg; + + IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; + IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; + IoTKitSecCtlPPC ahbexp[IOTS_NUM_APB_EXP_PPC]; +}; #endif diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static const uint8_t iotkit_secctl_ns_idregs[] = { 0x0d, 0xf0, 0x05, 0xb1, }; +/* The register sets for the various PPCs (AHB internal, APB internal, + * AHB expansion, APB expansion) are all set up so that they are + * in 16-aligned blocks so offsets 0xN0, 0xN4, 0xN8, 0xNC are PPCs + * 0, 1, 2, 3 of that type, so we can convert a register address offset + * into an an index into a PPC array easily. + */ +static inline int offset_to_ppc_idx(uint32_t offset) +{ + return extract32(offset, 2, 2); +} + +typedef void PerPPCFunction(IoTKitSecCtlPPC *ppc); + +static void foreach_ppc(IoTKitSecCtl *s, PerPPCFunction *fn) +{ + int i; + + for (i = 0; i < IOTS_NUM_APB_PPC; i++) { + fn(&s->apb[i]); + } + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + fn(&s->apbexp[i]); + } + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + fn(&s->ahbexp[i]); + } +} + static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { uint64_t r; uint32_t offset = addr & ~0x3; + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); switch (offset) { case A_AHBNSPPC0: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, r = 0; break; case A_SECRESPCFG: - case A_NSCCFG: - case A_SECMPCINTSTATUS: + r = s->secrespcfg; + break; case A_SECPPCINTSTAT: + r = s->secppcintstat; + break; case A_SECPPCINTEN: - case A_SECMSCINTSTAT: - case A_SECMSCINTEN: - case A_BRGINTSTAT: - case A_BRGINTEN: + r = s->secppcinten; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: case A_AHBNSPPCEXP3: + r = s->ahbexp[offset_to_ppc_idx(offset)].ns; + break; case A_APBNSPPC0: case A_APBNSPPC1: + r = s->apb[offset_to_ppc_idx(offset)].ns; + break; case A_APBNSPPCEXP0: case A_APBNSPPCEXP1: case A_APBNSPPCEXP2: case A_APBNSPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].ns; + break; case A_AHBSPPPCEXP0: case A_AHBSPPPCEXP1: case A_AHBSPPPCEXP2: case A_AHBSPPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].sp; + break; case A_APBSPPPC0: case A_APBSPPPC1: + r = s->apb[offset_to_ppc_idx(offset)].sp; + break; case A_APBSPPPCEXP0: case A_APBSPPPCEXP1: case A_APBSPPPCEXP2: case A_APBSPPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].sp; + break; + case A_NSCCFG: + case A_SECMPCINTSTATUS: + case A_SECMSCINTSTAT: + case A_SECMSCINTEN: + case A_BRGINTSTAT: + case A_BRGINTEN: case A_NSMSCEXP: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block read: " @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, return MEMTX_OK; } +static void iotkit_secctl_update_ppc_ap(IoTKitSecCtlPPC *ppc) +{ + int i; + + for (i = 0; i < ppc->numports; i++) { + bool v; + + if (extract32(ppc->ns, i, 1)) { + v = extract32(ppc->nsp, i, 1); + } else { + v = extract32(ppc->sp, i, 1); + } + qemu_set_irq(ppc->ap[i], v); + } +} + +static void iotkit_secctl_ppc_ns_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + int i; + + ppc->ns = value & MAKE_64BIT_MASK(0, ppc->numports); + for (i = 0; i < ppc->numports; i++) { + qemu_set_irq(ppc->nonsec[i], extract32(ppc->ns, i, 1)); + } + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_sp_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + ppc->sp = value & MAKE_64BIT_MASK(0, ppc->numports); + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_nsp_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + ppc->nsp = value & MAKE_64BIT_MASK(0, ppc->numports); + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_update_irq_clear(IoTKitSecCtlPPC *ppc) +{ + uint32_t value = ppc->parent->secppcintstat; + + qemu_set_irq(ppc->irq_clear, extract32(value, ppc->irq_bit_offset, 1)); +} + +static void iotkit_secctl_ppc_update_irq_enable(IoTKitSecCtlPPC *ppc) +{ + uint32_t value = ppc->parent->secppcinten; + + qemu_set_irq(ppc->irq_enable, extract32(value, ppc->irq_bit_offset, 1)); +} + static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint32_t offset = addr; + IoTKitSecCtlPPC *ppc; trace_iotkit_secctl_s_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, switch (offset) { case A_SECRESPCFG: - case A_NSCCFG: + value &= 1; + s->secrespcfg = value; + qemu_set_irq(s->sec_resp_cfg, s->secrespcfg); + break; case A_SECPPCINTCLR: + value &= 0x00f000f3; + foreach_ppc(s, iotkit_secctl_ppc_update_irq_clear); + break; case A_SECPPCINTEN: - case A_SECMSCINTCLR: - case A_SECMSCINTEN: - case A_BRGINTCLR: - case A_BRGINTEN: + s->secppcinten = value & 0x00f000f3; + foreach_ppc(s, iotkit_secctl_ppc_update_irq_enable); + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: case A_AHBNSPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_APBNSPPC0: case A_APBNSPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_APBNSPPCEXP0: case A_APBNSPPCEXP1: case A_APBNSPPCEXP2: case A_APBNSPPCEXP3: + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_AHBSPPPCEXP0: case A_AHBSPPPCEXP1: case A_AHBSPPPCEXP2: case A_AHBSPPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; case A_APBSPPPC0: case A_APBSPPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; case A_APBSPPPCEXP0: case A_APBSPPPCEXP1: case A_APBSPPPCEXP2: case A_APBSPPPCEXP3: + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; + case A_NSCCFG: + case A_SECMSCINTCLR: + case A_SECMSCINTEN: + case A_BRGINTCLR: + case A_BRGINTEN: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block write: " "unimplemented offset 0x%x\n", offset); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint64_t r; uint32_t offset = addr & ~0x3; @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, case A_AHBNSPPPCEXP1: case A_AHBNSPPPCEXP2: case A_AHBNSPPPCEXP3: + r = s->ahbexp[offset_to_ppc_idx(offset)].nsp; + break; case A_APBNSPPPC0: case A_APBNSPPPC1: + r = s->apb[offset_to_ppc_idx(offset)].nsp; + break; case A_APBNSPPPCEXP0: case A_APBNSPPPCEXP1: case A_APBNSPPPCEXP2: case A_APBNSPPPCEXP3: - qemu_log_mask(LOG_UNIMP, - "IoTKit SecCtl NS block read: " - "unimplemented offset 0x%x\n", offset); + r = s->apbexp[offset_to_ppc_idx(offset)].nsp; break; case A_PID4: case A_PID5: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint32_t offset = addr; + IoTKitSecCtlPPC *ppc; trace_iotkit_secctl_ns_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, case A_AHBNSPPPCEXP1: case A_AHBNSPPPCEXP2: case A_AHBNSPPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); + break; case A_APBNSPPPC0: case A_APBNSPPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); + break; case A_APBNSPPPCEXP0: case A_APBNSPPPCEXP1: case A_APBNSPPPCEXP2: case A_APBNSPPPCEXP3: - qemu_log_mask(LOG_UNIMP, - "IoTKit SecCtl NS block write: " - "unimplemented offset 0x%x\n", offset); + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); break; case A_AHBNSPPPC0: case A_PID4: @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps iotkit_secctl_ns_ops = { .impl.max_access_size = 4, }; +static void iotkit_secctl_reset_ppc(IoTKitSecCtlPPC *ppc) +{ + ppc->ns = 0; + ppc->sp = 0; + ppc->nsp = 0; +} + static void iotkit_secctl_reset(DeviceState *dev) { + IoTKitSecCtl *s = IOTKIT_SECCTL(dev); + s->secppcintstat = 0; + s->secppcinten = 0; + s->secrespcfg = 0; + + foreach_ppc(s, iotkit_secctl_reset_ppc); +} + +static void iotkit_secctl_ppc_irqstatus(void *opaque, int n, int level) +{ + IoTKitSecCtlPPC *ppc = opaque; + IoTKitSecCtl *s = IOTKIT_SECCTL(ppc->parent); + int irqbit = ppc->irq_bit_offset + n; + + s->secppcintstat = deposit32(s->secppcintstat, irqbit, 1, level); +} + +static void iotkit_secctl_init_ppc(IoTKitSecCtl *s, + IoTKitSecCtlPPC *ppc, + const char *name, + int numports, + int irq_bit_offset) +{ + char *gpioname; + DeviceState *dev = DEVICE(s); + + ppc->numports = numports; + ppc->irq_bit_offset = irq_bit_offset; + ppc->parent = s; + + gpioname = g_strdup_printf("%s_nonsec", name); + qdev_init_gpio_out_named(dev, ppc->nonsec, gpioname, numports); + g_free(gpioname); + gpioname = g_strdup_printf("%s_ap", name); + qdev_init_gpio_out_named(dev, ppc->ap, gpioname, numports); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_enable", name); + qdev_init_gpio_out_named(dev, &ppc->irq_enable, gpioname, 1); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_clear", name); + qdev_init_gpio_out_named(dev, &ppc->irq_clear, gpioname, 1); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_status", name); + qdev_init_gpio_in_named_with_opaque(dev, iotkit_secctl_ppc_irqstatus, + ppc, gpioname, 1); + g_free(gpioname); } static void iotkit_secctl_init(Object *obj) { IoTKitSecCtl *s = IOTKIT_SECCTL(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + DeviceState *dev = DEVICE(obj); + int i; + + iotkit_secctl_init_ppc(s, &s->apb[0], "apb_ppc0", + IOTS_APB_PPC0_NUM_PORTS, 0); + iotkit_secctl_init_ppc(s, &s->apb[1], "apb_ppc1", + IOTS_APB_PPC1_NUM_PORTS, 1); + + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + IoTKitSecCtlPPC *ppc = &s->apbexp[i]; + char *ppcname = g_strdup_printf("apb_ppcexp%d", i); + iotkit_secctl_init_ppc(s, ppc, ppcname, IOTS_PPC_NUM_PORTS, 4 + i); + g_free(ppcname); + } + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + IoTKitSecCtlPPC *ppc = &s->ahbexp[i]; + char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); + iotkit_secctl_init_ppc(s, ppc, ppcname, IOTS_PPC_NUM_PORTS, 20 + i); + g_free(ppcname); + } + + qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, s, "iotkit-secctl-s-regs", 0x1000); @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) sysbus_init_mmio(sbd, &s->ns_regs); } +static const VMStateDescription iotkit_secctl_ppc_vmstate = { + .name = "iotkit-secctl-ppc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(ns, IoTKitSecCtlPPC), + VMSTATE_UINT32(sp, IoTKitSecCtlPPC), + VMSTATE_UINT32(nsp, IoTKitSecCtlPPC), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription iotkit_secctl_vmstate = { .name = "iotkit-secctl", .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { + VMSTATE_UINT32(secppcintstat, IoTKitSecCtl), + VMSTATE_UINT32(secppcinten, IoTKitSecCtl), + VMSTATE_UINT32(secrespcfg, IoTKitSecCtl), + VMSTATE_STRUCT_ARRAY(apb, IoTKitSecCtl, IOTS_NUM_APB_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), + VMSTATE_STRUCT_ARRAY(apbexp, IoTKitSecCtl, IOTS_NUM_APB_EXP_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), + VMSTATE_STRUCT_ARRAY(ahbexp, IoTKitSecCtl, IOTS_NUM_AHB_EXP_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), VMSTATE_END_OF_LIST() } }; -- 2.16.2 Add remaining easy registers to iotkit-secctl: * NSCCFG just routes its two bits out to external GPIO lines * BRGINSTAT/BRGINTCLR/BRGINTEN can be dummies, because QEMU's bus fabric can never report errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180220180325.29818-18-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 4 ++++ hw/misc/iotkit-secctl.c | 32 ++++++++++++++++++++++++++------ 2 files changed, 30 insertions(+), 6 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * + sysbus MMIO region 1 is the "non-secure privilege control block" registers * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses * should RAZ/WI or bus error + * + named GPIO output "nsc_cfg" whose value tracks the NSCCFG register value * Controlling the 2 APB PPCs in the IoTKit: * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap @@ -XXX,XX +XXX,XX @@ struct IoTKitSecCtl { /*< public >*/ qemu_irq sec_resp_cfg; + qemu_irq nsc_cfg_irq; MemoryRegion s_regs; MemoryRegion ns_regs; @@ -XXX,XX +XXX,XX @@ struct IoTKitSecCtl { uint32_t secppcintstat; uint32_t secppcinten; uint32_t secrespcfg; + uint32_t nsccfg; + uint32_t brginten; IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, case A_SECRESPCFG: r = s->secrespcfg; break; + case A_NSCCFG: + r = s->nsccfg; + break; case A_SECPPCINTSTAT: r = s->secppcintstat; break; case A_SECPPCINTEN: r = s->secppcinten; break; + case A_BRGINTSTAT: + /* QEMU's bus fabric can never report errors as it doesn't buffer + * writes, so we never report bridge interrupts. + */ + r = 0; + break; + case A_BRGINTEN: + r = s->brginten; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, case A_APBSPPPCEXP3: r = s->apbexp[offset_to_ppc_idx(offset)].sp; break; - case A_NSCCFG: case A_SECMPCINTSTATUS: case A_SECMSCINTSTAT: case A_SECMSCINTEN: - case A_BRGINTSTAT: - case A_BRGINTEN: case A_NSMSCEXP: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block read: " @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, } switch (offset) { + case A_NSCCFG: + s->nsccfg = value & 3; + qemu_set_irq(s->nsc_cfg_irq, s->nsccfg); + break; case A_SECRESPCFG: value &= 1; s->secrespcfg = value; @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, s->secppcinten = value & 0x00f000f3; foreach_ppc(s, iotkit_secctl_ppc_update_irq_enable); break; + case A_BRGINTCLR: + break; + case A_BRGINTEN: + s->brginten = value & 0xffff0000; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, ppc = &s->apbexp[offset_to_ppc_idx(offset)]; iotkit_secctl_ppc_sp_write(ppc, value); break; - case A_NSCCFG: case A_SECMSCINTCLR: case A_SECMSCINTEN: - case A_BRGINTCLR: - case A_BRGINTEN: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block write: " "unimplemented offset 0x%x\n", offset); @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_reset(DeviceState *dev) s->secppcintstat = 0; s->secppcinten = 0; s->secrespcfg = 0; + s->nsccfg = 0; + s->brginten = 0; foreach_ppc(s, iotkit_secctl_reset_ppc); } @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) } qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); + qdev_init_gpio_out_named(dev, &s->nsc_cfg_irq, "nsc_cfg", 1); memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, s, "iotkit-secctl-s-regs", 0x1000); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription iotkit_secctl_vmstate = { VMSTATE_UINT32(secppcintstat, IoTKitSecCtl), VMSTATE_UINT32(secppcinten, IoTKitSecCtl), VMSTATE_UINT32(secrespcfg, IoTKitSecCtl), + VMSTATE_UINT32(nsccfg, IoTKitSecCtl), + VMSTATE_UINT32(brginten, IoTKitSecCtl), VMSTATE_STRUCT_ARRAY(apb, IoTKitSecCtl, IOTS_NUM_APB_PPC, 1, iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), VMSTATE_STRUCT_ARRAY(apbexp, IoTKitSecCtl, IOTS_NUM_APB_EXP_PPC, 1, -- 2.16.2 Model the Arm IoT Kit documented in http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html The Arm IoT Kit is a subsystem which includes a CPU and some devices, and is intended be extended by adding extra devices to form a complete system. It is used in the MPS2 board's AN505 image for the Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-19-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 1 + include/hw/arm/iotkit.h | 109 ++++++++ hw/arm/iotkit.c | 598 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 4 files changed, 709 insertions(+) create mode 100644 include/hw/arm/iotkit.h create mode 100644 hw/arm/iotkit.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o +obj-$(CONFIG_IOTKIT) += iotkit.o diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/iotkit.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the Arm IoT Kit which is documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * It contains: + * a Cortex-M33 + * the IDAU + * some timers and watchdogs + * two peripheral protection controllers + * a memory protection controller + * a security controller + * a bus fabric which arranges that some parts of the address + * space are secure and non-secure aliases of each other + * + * QEMU interface: + * + QOM property "memory" is a MemoryRegion containing the devices provided + * by the board model. + * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts + * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts, which + * are wired to the NVIC lines 32 .. n+32 + * Controlling up to 4 AHB expansion PPBs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status + */ + +#ifndef IOTKIT_H +#define IOTKIT_H + +#include "hw/sysbus.h" +#include "hw/arm/armv7m.h" +#include "hw/misc/iotkit-secctl.h" +#include "hw/misc/tz-ppc.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/unimp.h" +#include "hw/or-irq.h" +#include "hw/core/split-irq.h" + +#define TYPE_IOTKIT "iotkit" +#define IOTKIT(obj) OBJECT_CHECK(IoTKit, (obj), TYPE_IOTKIT) + +/* We have an IRQ splitter and an OR gate input for each external PPC + * and the 2 internal PPCs + */ +#define NUM_EXTERNAL_PPCS (IOTS_NUM_AHB_EXP_PPC + IOTS_NUM_APB_EXP_PPC) +#define NUM_PPCS (NUM_EXTERNAL_PPCS + 2) + +typedef struct IoTKit { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + ARMv7MState armv7m; + IoTKitSecCtl secctl; + TZPPC apb_ppc0; + TZPPC apb_ppc1; + CMSDKAPBTIMER timer0; + CMSDKAPBTIMER timer1; + qemu_or_irq ppc_irq_orgate; + SplitIRQ sec_resp_splitter; + SplitIRQ ppc_irq_splitter[NUM_PPCS]; + + UnimplementedDeviceState dualtimer; + UnimplementedDeviceState s32ktimer; + + MemoryRegion container; + MemoryRegion alias1; + MemoryRegion alias2; + MemoryRegion alias3; + MemoryRegion sram0; + + qemu_irq *exp_irqs; + qemu_irq ppc0_irq; + qemu_irq ppc1_irq; + qemu_irq sec_resp_cfg; + qemu_irq sec_resp_cfg_in; + qemu_irq nsc_cfg_in; + + qemu_irq irq_status_in[NUM_EXTERNAL_PPCS]; + + uint32_t nsccfg; + + /* Properties */ + MemoryRegion *board_memory; + uint32_t exp_numirq; + uint32_t mainclk_frq; +} IoTKit; + +#endif diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/iotkit.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/arm/iotkit.h" +#include "hw/misc/unimp.h" +#include "hw/arm/arm.h" + +/* Create an alias region of @size bytes starting at @base + * which mirrors the memory starting at @orig. + */ +static void make_alias(IoTKit *s, MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size, hwaddr orig) +{ + memory_region_init_alias(mr, NULL, name, &s->container, orig, size); + /* The alias is even lower priority than unimplemented_device regions */ + memory_region_add_subregion_overlap(&s->container, base, mr, -1500); +} + +static void init_sysbus_child(Object *parent, const char *childname, + void *child, size_t childsize, + const char *childtype) +{ + object_initialize(child, childsize, childtype); + object_property_add_child(parent, childname, OBJECT(child), &error_abort); + qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); +} + +static void irq_status_forwarder(void *opaque, int n, int level) +{ + qemu_irq destirq = opaque; + + qemu_set_irq(destirq, level); +} + +static void nsccfg_handler(void *opaque, int n, int level) +{ + IoTKit *s = IOTKIT(opaque); + + s->nsccfg = level; +} + +static void iotkit_forward_ppc(IoTKit *s, const char *ppcname, int ppcnum) +{ + /* Each of the 4 AHB and 4 APB PPCs that might be present in a + * system using the IoTKit has a collection of control lines which + * are provided by the security controller and which we want to + * expose as control lines on the IoTKit device itself, so the + * code using the IoTKit can wire them up to the PPCs. + */ + SplitIRQ *splitter = &s->ppc_irq_splitter[ppcnum]; + DeviceState *iotkitdev = DEVICE(s); + DeviceState *dev_secctl = DEVICE(&s->secctl); + DeviceState *dev_splitter = DEVICE(splitter); + char *name; + + name = g_strdup_printf("%s_nonsec", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_ap", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_irq_enable", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_irq_clear", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + + /* irq_status is a little more tricky, because we need to + * split it so we can send it both to the security controller + * and to our OR gate for the NVIC interrupt line. + * Connect up the splitter's outputs, and create a GPIO input + * which will pass the line state to the input splitter. + */ + name = g_strdup_printf("%s_irq_status", ppcname); + qdev_connect_gpio_out(dev_splitter, 0, + qdev_get_gpio_in_named(dev_secctl, + name, 0)); + qdev_connect_gpio_out(dev_splitter, 1, + qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), ppcnum)); + s->irq_status_in[ppcnum] = qdev_get_gpio_in(dev_splitter, 0); + qdev_init_gpio_in_named_with_opaque(iotkitdev, irq_status_forwarder, + s->irq_status_in[ppcnum], name, 1); + g_free(name); +} + +static void iotkit_forward_sec_resp_cfg(IoTKit *s) +{ + /* Forward the 3rd output from the splitter device as a + * named GPIO output of the iotkit object. + */ + DeviceState *dev = DEVICE(s); + DeviceState *dev_splitter = DEVICE(&s->sec_resp_splitter); + + qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); + s->sec_resp_cfg_in = qemu_allocate_irq(irq_status_forwarder, + s->sec_resp_cfg, 1); + qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); +} + +static void iotkit_init(Object *obj) +{ + IoTKit *s = IOTKIT(obj); + int i; + + memory_region_init(&s->container, obj, "iotkit-container", UINT64_MAX); + + init_sysbus_child(obj, "armv7m", &s->armv7m, sizeof(s->armv7m), + TYPE_ARMV7M); + qdev_prop_set_string(DEVICE(&s->armv7m), "cpu-type", + ARM_CPU_TYPE_NAME("cortex-m33")); + + init_sysbus_child(obj, "secctl", &s->secctl, sizeof(s->secctl), + TYPE_IOTKIT_SECCTL); + init_sysbus_child(obj, "apb-ppc0", &s->apb_ppc0, sizeof(s->apb_ppc0), + TYPE_TZ_PPC); + init_sysbus_child(obj, "apb-ppc1", &s->apb_ppc1, sizeof(s->apb_ppc1), + TYPE_TZ_PPC); + init_sysbus_child(obj, "timer0", &s->timer0, sizeof(s->timer0), + TYPE_CMSDK_APB_TIMER); + init_sysbus_child(obj, "timer1", &s->timer1, sizeof(s->timer1), + TYPE_CMSDK_APB_TIMER); + init_sysbus_child(obj, "dualtimer", &s->dualtimer, sizeof(s->dualtimer), + TYPE_UNIMPLEMENTED_DEVICE); + object_initialize(&s->ppc_irq_orgate, sizeof(s->ppc_irq_orgate), + TYPE_OR_IRQ); + object_property_add_child(obj, "ppc-irq-orgate", + OBJECT(&s->ppc_irq_orgate), &error_abort); + object_initialize(&s->sec_resp_splitter, sizeof(s->sec_resp_splitter), + TYPE_SPLIT_IRQ); + object_property_add_child(obj, "sec-resp-splitter", + OBJECT(&s->sec_resp_splitter), &error_abort); + for (i = 0; i < ARRAY_SIZE(s->ppc_irq_splitter); i++) { + char *name = g_strdup_printf("ppc-irq-splitter-%d", i); + SplitIRQ *splitter = &s->ppc_irq_splitter[i]; + + object_initialize(splitter, sizeof(*splitter), TYPE_SPLIT_IRQ); + object_property_add_child(obj, name, OBJECT(splitter), &error_abort); + } + init_sysbus_child(obj, "s32ktimer", &s->s32ktimer, sizeof(s->s32ktimer), + TYPE_UNIMPLEMENTED_DEVICE); +} + +static void iotkit_exp_irq(void *opaque, int n, int level) +{ + IoTKit *s = IOTKIT(opaque); + + qemu_set_irq(s->exp_irqs[n], level); +} + +static void iotkit_realize(DeviceState *dev, Error **errp) +{ + IoTKit *s = IOTKIT(dev); + int i; + MemoryRegion *mr; + Error *err = NULL; + SysBusDevice *sbd_apb_ppc0; + SysBusDevice *sbd_secctl; + DeviceState *dev_apb_ppc0; + DeviceState *dev_apb_ppc1; + DeviceState *dev_secctl; + DeviceState *dev_splitter; + + if (!s->board_memory) { + error_setg(errp, "memory property was not set"); + return; + } + + if (!s->mainclk_frq) { + error_setg(errp, "MAINCLK property was not set"); + return; + } + + /* Handling of which devices should be available only to secure + * code is usually done differently for M profile than for A profile. + * Instead of putting some devices only into the secure address space, + * devices exist in both address spaces but with hard-wired security + * permissions that will cause the CPU to fault for non-secure accesses. + * + * The IoTKit has an IDAU (Implementation Defined Access Unit), + * which specifies hard-wired security permissions for different + * areas of the physical address space. For the IoTKit IDAU, the + * top 4 bits of the physical address are the IDAU region ID, and + * if bit 28 (ie the lowest bit of the ID) is 0 then this is an NS + * region, otherwise it is an S region. + * + * The various devices and RAMs are generally all mapped twice, + * once into a region that the IDAU defines as secure and once + * into a non-secure region. They sit behind either a Memory + * Protection Controller (for RAM) or a Peripheral Protection + * Controller (for devices), which allow a more fine grained + * configuration of whether non-secure accesses are permitted. + * + * (The other place that guest software can configure security + * permissions is in the architected SAU (Security Attribution + * Unit), which is entirely inside the CPU. The IDAU can upgrade + * the security attributes for a region to more restrictive than + * the SAU specifies, but cannot downgrade them.) + * + * 0x10000000..0x1fffffff alias of 0x00000000..0x0fffffff + * 0x20000000..0x2007ffff 32KB FPGA block RAM + * 0x30000000..0x3fffffff alias of 0x20000000..0x2fffffff + * 0x40000000..0x4000ffff base peripheral region 1 + * 0x40010000..0x4001ffff CPU peripherals (none for IoTKit) + * 0x40020000..0x4002ffff system control element peripherals + * 0x40080000..0x400fffff base peripheral region 2 + * 0x50000000..0x5fffffff alias of 0x40000000..0x4fffffff + */ + + memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); + + qdev_prop_set_uint32(DEVICE(&s->armv7m), "num-irq", s->exp_numirq + 32); + /* In real hardware the initial Secure VTOR is set from the INITSVTOR0 + * register in the IoT Kit System Control Register block, and the + * initial value of that is in turn specifiable by the FPGA that + * instantiates the IoT Kit. In QEMU we don't implement this wrinkle, + * and simply set the CPU's init-svtor to the IoT Kit default value. + */ + qdev_prop_set_uint32(DEVICE(&s->armv7m), "init-svtor", 0x10000000); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(&s->container), + "memory", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_link(OBJECT(&s->armv7m), OBJECT(s), "idau", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + /* Connect our EXP_IRQ GPIOs to the NVIC's lines 32 and up. */ + s->exp_irqs = g_new(qemu_irq, s->exp_numirq); + for (i = 0; i < s->exp_numirq; i++) { + s->exp_irqs[i] = qdev_get_gpio_in(DEVICE(&s->armv7m), i + 32); + } + qdev_init_gpio_in_named(dev, iotkit_exp_irq, "EXP_IRQ", s->exp_numirq); + + /* Set up the big aliases first */ + make_alias(s, &s->alias1, "alias 1", 0x10000000, 0x10000000, 0x00000000); + make_alias(s, &s->alias2, "alias 2", 0x30000000, 0x10000000, 0x20000000); + /* The 0x50000000..0x5fffffff region is not a pure alias: it has + * a few extra devices that only appear there (generally the + * control interfaces for the protection controllers). + * We implement this by mapping those devices over the top of this + * alias MR at a higher priority. + */ + make_alias(s, &s->alias3, "alias 3", 0x50000000, 0x10000000, 0x40000000); + + /* This RAM should be behind a Memory Protection Controller, but we + * don't implement that yet. + */ + memory_region_init_ram(&s->sram0, NULL, "iotkit.sram0", 0x00008000, &err); + if (err) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(&s->container, 0x20000000, &s->sram0); + + /* Security controller */ + object_property_set_bool(OBJECT(&s->secctl), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sbd_secctl = SYS_BUS_DEVICE(&s->secctl); + dev_secctl = DEVICE(&s->secctl); + sysbus_mmio_map(sbd_secctl, 0, 0x50080000); + sysbus_mmio_map(sbd_secctl, 1, 0x40080000); + + s->nsc_cfg_in = qemu_allocate_irq(nsccfg_handler, s, 1); + qdev_connect_gpio_out_named(dev_secctl, "nsc_cfg", 0, s->nsc_cfg_in); + + /* The sec_resp_cfg output from the security controller must be split into + * multiple lines, one for each of the PPCs within the IoTKit and one + * that will be an output from the IoTKit to the system. + */ + object_property_set_int(OBJECT(&s->sec_resp_splitter), 3, + "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->sec_resp_splitter), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + dev_splitter = DEVICE(&s->sec_resp_splitter); + qdev_connect_gpio_out_named(dev_secctl, "sec_resp_cfg", 0, + qdev_get_gpio_in(dev_splitter, 0)); + + /* Devices behind APB PPC0: + * 0x40000000: timer0 + * 0x40001000: timer1 + * 0x40002000: dual timer + * We must configure and realize each downstream device and connect + * it to the appropriate PPC port; then we can realize the PPC and + * map its upstream ends to the right place in the container. + */ + qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + object_property_set_bool(OBJECT(&s->timer0), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer0), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer0), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[0]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + object_property_set_bool(OBJECT(&s->timer1), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer1), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer1), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[1]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + qdev_prop_set_string(DEVICE(&s->dualtimer), "name", "Dual timer"); + qdev_prop_set_uint64(DEVICE(&s->dualtimer), "size", 0x1000); + object_property_set_bool(OBJECT(&s->dualtimer), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dualtimer), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[2]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->apb_ppc0), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + sbd_apb_ppc0 = SYS_BUS_DEVICE(&s->apb_ppc0); + dev_apb_ppc0 = DEVICE(&s->apb_ppc0); + + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 0); + memory_region_add_subregion(&s->container, 0x40000000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 1); + memory_region_add_subregion(&s->container, 0x40001000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 2); + memory_region_add_subregion(&s->container, 0x40002000, mr); + for (i = 0; i < IOTS_APB_PPC0_NUM_PORTS; i++) { + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_nonsec", i, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_nonsec", i)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_ap", i, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_ap", i)); + } + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_irq_enable", 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "irq_enable", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_irq_clear", 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "irq_clear", 0)); + qdev_connect_gpio_out(dev_splitter, 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_sec_resp", 0)); + + /* All the PPC irq lines (from the 2 internal PPCs and the 8 external + * ones) are sent individually to the security controller, and also + * ORed together to give a single combined PPC interrupt to the NVIC. + */ + object_property_set_int(OBJECT(&s->ppc_irq_orgate), + NUM_PPCS, "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->ppc_irq_orgate), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + qdev_connect_gpio_out(DEVICE(&s->ppc_irq_orgate), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 10)); + + /* 0x40010000 .. 0x4001ffff: private CPU region: unused in IoTKit */ + + /* 0x40020000 .. 0x4002ffff : IoTKit system control peripheral region */ + /* Devices behind APB PPC1: + * 0x4002f000: S32K timer + */ + qdev_prop_set_string(DEVICE(&s->s32ktimer), "name", "S32KTIMER"); + qdev_prop_set_uint64(DEVICE(&s->s32ktimer), "size", 0x1000); + object_property_set_bool(OBJECT(&s->s32ktimer), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->s32ktimer), 0); + object_property_set_link(OBJECT(&s->apb_ppc1), OBJECT(mr), "port[0]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->apb_ppc1), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->apb_ppc1), 0); + memory_region_add_subregion(&s->container, 0x4002f000, mr); + + dev_apb_ppc1 = DEVICE(&s->apb_ppc1); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_nonsec", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_nonsec", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_ap", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_ap", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_irq_enable", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "irq_enable", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_irq_clear", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "irq_clear", 0)); + qdev_connect_gpio_out(dev_splitter, 1, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_sec_resp", 0)); + + /* Using create_unimplemented_device() maps the stub into the + * system address space rather than into our container, but the + * overall effect to the guest is the same. + */ + create_unimplemented_device("SYSINFO", 0x40020000, 0x1000); + + create_unimplemented_device("SYSCONTROL", 0x50021000, 0x1000); + create_unimplemented_device("S32KWATCHDOG", 0x5002e000, 0x1000); + + /* 0x40080000 .. 0x4008ffff : IoTKit second Base peripheral region */ + + create_unimplemented_device("NS watchdog", 0x40081000, 0x1000); + create_unimplemented_device("S watchdog", 0x50081000, 0x1000); + + create_unimplemented_device("SRAM0 MPC", 0x50083000, 0x1000); + + for (i = 0; i < ARRAY_SIZE(s->ppc_irq_splitter); i++) { + Object *splitter = OBJECT(&s->ppc_irq_splitter[i]); + + object_property_set_int(splitter, 2, "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(splitter, true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + } + + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); + + iotkit_forward_ppc(s, ppcname, i); + g_free(ppcname); + } + + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + char *ppcname = g_strdup_printf("apb_ppcexp%d", i); + + iotkit_forward_ppc(s, ppcname, i + IOTS_NUM_AHB_EXP_PPC); + g_free(ppcname); + } + + for (i = NUM_EXTERNAL_PPCS; i < NUM_PPCS; i++) { + /* Wire up IRQ splitter for internal PPCs */ + DeviceState *devs = DEVICE(&s->ppc_irq_splitter[i]); + char *gpioname = g_strdup_printf("apb_ppc%d_irq_status", + i - NUM_EXTERNAL_PPCS); + TZPPC *ppc = (i == NUM_EXTERNAL_PPCS) ? &s->apb_ppc0 : &s->apb_ppc1; + + qdev_connect_gpio_out(devs, 0, + qdev_get_gpio_in_named(dev_secctl, gpioname, 0)); + qdev_connect_gpio_out(devs, 1, + qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), i)); + qdev_connect_gpio_out_named(DEVICE(ppc), "irq", 0, + qdev_get_gpio_in(devs, 0)); + } + + iotkit_forward_sec_resp_cfg(s); + + system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; +} + +static void iotkit_idau_check(IDAUInterface *ii, uint32_t address, + int *iregion, bool *exempt, bool *ns, bool *nsc) +{ + /* For IoTKit systems the IDAU responses are simple logical functions + * of the address bits. The NSC attribute is guest-adjustable via the + * NSCCFG register in the security controller. + */ + IoTKit *s = IOTKIT(ii); + int region = extract32(address, 28, 4); + + *ns = !(region & 1); + *nsc = (region == 1 && (s->nsccfg & 1)) || (region == 3 && (s->nsccfg & 2)); + /* 0xe0000000..0xe00fffff and 0xf0000000..0xf00fffff are exempt */ + *exempt = (address & 0xeff00000) == 0xe0000000; + *iregion = region; +} + +static const VMStateDescription iotkit_vmstate = { + .name = "iotkit", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(nsccfg, IoTKit), + VMSTATE_END_OF_LIST() + } +}; + +static Property iotkit_properties[] = { + DEFINE_PROP_LINK("memory", IoTKit, board_memory, TYPE_MEMORY_REGION, + MemoryRegion *), + DEFINE_PROP_UINT32("EXP_NUMIRQ", IoTKit, exp_numirq, 64), + DEFINE_PROP_UINT32("MAINCLK", IoTKit, mainclk_frq, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void iotkit_reset(DeviceState *dev) +{ + IoTKit *s = IOTKIT(dev); + + s->nsccfg = 0; +} + +static void iotkit_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(klass); + + dc->realize = iotkit_realize; + dc->vmsd = &iotkit_vmstate; + dc->props = iotkit_properties; + dc->reset = iotkit_reset; + iic->check = iotkit_idau_check; +} + +static const TypeInfo iotkit_info = { + .name = TYPE_IOTKIT, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IoTKit), + .instance_init = iotkit_init, + .class_init = iotkit_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_IDAU_INTERFACE }, + { } + } +}; + +static void iotkit_register_types(void) +{ + type_register_static(&iotkit_info); +} + +type_init(iotkit_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_TZ_PPC=y +CONFIG_IOTKIT=y CONFIG_IOTKIT_SECCTL=y CONFIG_VERSATILE_PCI=y -- 2.16.2 Define a new board model for the MPS2 with an AN505 FPGA image containing a Cortex-M33. Since the FPGA images for TrustZone cores (AN505, and the similar AN519 for Cortex-M23) have a significantly different layout of devices to the non-TrustZone images, we use a new source file rather than shoehorning them into the existing mps2.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-20-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 1 + hw/arm/mps2-tz.c | 503 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 504 insertions(+) create mode 100644 hw/arm/mps2-tz.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o +obj-$(CONFIG_MPS2) += mps2-tz.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM V2M MPS2 board emulation, trustzone aware FPGA images + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger + * FPGA but is otherwise the same as the 2). Since the CPU itself + * and most of the devices are in the FPGA, the details of the board + * as seen by the guest depend significantly on the FPGA image. + * This source file covers the following FPGA images, for TrustZone cores: + * "mps2-an505" -- Cortex-M33 as documented in ARM Application Note AN505 + * + * Links to the TRM for the board itself and to the various Application + * Notes which document the FPGA images can be found here: + * https://developer.arm.com/products/system-design/development-boards/fpga-prototyping-boards/mps2 + * + * Board TRM: + * http://infocenter.arm.com/help/topic/com.arm.doc.100112_0200_06_en/versatile_express_cortex_m_prototyping_systems_v2m_mps2_and_v2m_mps2plus_technical_reference_100112_0200_06_en.pdf + * Application Note AN505: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * The AN505 defers to the Cortex-M33 processor ARMv8M IoT Kit FVP User Guide + * (ARM ECM0601256) for the details of some of the device layout: + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/arm/arm.h" +#include "hw/arm/armv7m.h" +#include "hw/or-irq.h" +#include "hw/boards.h" +#include "exec/address-spaces.h" +#include "sysemu/sysemu.h" +#include "hw/misc/unimp.h" +#include "hw/char/cmsdk-apb-uart.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" +#include "hw/arm/iotkit.h" +#include "hw/devices.h" +#include "net/net.h" +#include "hw/core/split-irq.h" + +typedef enum MPS2TZFPGAType { + FPGA_AN505, +} MPS2TZFPGAType; + +typedef struct { + MachineClass parent; + MPS2TZFPGAType fpga_type; + uint32_t scc_id; +} MPS2TZMachineClass; + +typedef struct { + MachineState parent; + + IoTKit iotkit; + MemoryRegion psram; + MemoryRegion ssram1; + MemoryRegion ssram1_m; + MemoryRegion ssram23; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + TZPPC ppc[5]; + UnimplementedDeviceState ssram_mpc[3]; + UnimplementedDeviceState spi[5]; + UnimplementedDeviceState i2c[4]; + UnimplementedDeviceState i2s_audio; + UnimplementedDeviceState gpio[5]; + UnimplementedDeviceState dma[4]; + UnimplementedDeviceState gfx; + CMSDKAPBUART uart[5]; + SplitIRQ sec_resp_splitter; + qemu_or_irq uart_irq_orgate; +} MPS2TZMachineState; + +#define TYPE_MPS2TZ_MACHINE "mps2tz" +#define TYPE_MPS2TZ_AN505_MACHINE MACHINE_TYPE_NAME("mps2-an505") + +#define MPS2TZ_MACHINE(obj) \ + OBJECT_CHECK(MPS2TZMachineState, obj, TYPE_MPS2TZ_MACHINE) +#define MPS2TZ_MACHINE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(MPS2TZMachineClass, obj, TYPE_MPS2TZ_MACHINE) +#define MPS2TZ_MACHINE_CLASS(klass) \ + OBJECT_CLASS_CHECK(MPS2TZMachineClass, klass, TYPE_MPS2TZ_MACHINE) + +/* Main SYSCLK frequency in Hz */ +#define SYSCLK_FRQ 20000000 + +/* Initialize the auxiliary RAM region @mr and map it into + * the memory map at @base. + */ +static void make_ram(MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size) +{ + memory_region_init_ram(mr, NULL, name, size, &error_fatal); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +/* Create an alias of an entire original MemoryRegion @orig + * located at @base in the memory map. + */ +static void make_ram_alias(MemoryRegion *mr, const char *name, + MemoryRegion *orig, hwaddr base) +{ + memory_region_init_alias(mr, NULL, name, orig, 0, + memory_region_size(orig)); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +static void init_sysbus_child(Object *parent, const char *childname, + void *child, size_t childsize, + const char *childtype) +{ + object_initialize(child, childsize, childtype); + object_property_add_child(parent, childname, OBJECT(child), &error_abort); + qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); + +} + +/* Most of the devices in the AN505 FPGA image sit behind + * Peripheral Protection Controllers. These data structures + * define the layout of which devices sit behind which PPCs. + * The devfn for each port is a function which creates, configures + * and initializes the device, returning the MemoryRegion which + * needs to be plugged into the downstream end of the PPC port. + */ +typedef MemoryRegion *MakeDevFn(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size); + +typedef struct PPCPortInfo { + const char *name; + MakeDevFn *devfn; + void *opaque; + hwaddr addr; + hwaddr size; +} PPCPortInfo; + +typedef struct PPCInfo { + const char *name; + PPCPortInfo ports[TZ_NUM_PORTS]; +} PPCInfo; + +static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms, + void *opaque, + const char *name, hwaddr size) +{ + /* Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE, + * and return a pointer to its MemoryRegion. + */ + UnimplementedDeviceState *uds = opaque; + + init_sysbus_child(OBJECT(mms), name, uds, + sizeof(UnimplementedDeviceState), + TYPE_UNIMPLEMENTED_DEVICE); + qdev_prop_set_string(DEVICE(uds), "name", name); + qdev_prop_set_uint64(DEVICE(uds), "size", size); + object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(uds), 0); +} + +static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + CMSDKAPBUART *uart = opaque; + int i = uart - &mms->uart[0]; + Chardev *uartchr = i < MAX_SERIAL_PORTS ? serial_hds[i] : NULL; + int rxirqno = i * 2; + int txirqno = i * 2 + 1; + int combirqno = i + 10; + SysBusDevice *s; + DeviceState *iotkitdev = DEVICE(&mms->iotkit); + DeviceState *orgate_dev = DEVICE(&mms->uart_irq_orgate); + + init_sysbus_child(OBJECT(mms), name, uart, + sizeof(mms->uart[0]), TYPE_CMSDK_APB_UART); + qdev_prop_set_chr(DEVICE(uart), "chardev", uartchr); + qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", SYSCLK_FRQ); + object_property_set_bool(OBJECT(uart), true, "realized", &error_fatal); + s = SYS_BUS_DEVICE(uart); + sysbus_connect_irq(s, 0, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", txirqno)); + sysbus_connect_irq(s, 1, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", rxirqno)); + sysbus_connect_irq(s, 2, qdev_get_gpio_in(orgate_dev, i * 2)); + sysbus_connect_irq(s, 3, qdev_get_gpio_in(orgate_dev, i * 2 + 1)); + sysbus_connect_irq(s, 4, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", combirqno)); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(uart), 0); +} + +static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + MPS2SCC *scc = opaque; + DeviceState *sccdev; + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms); + + object_initialize(scc, sizeof(mms->scc), TYPE_MPS2_SCC); + sccdev = DEVICE(scc); + qdev_set_parent_bus(sccdev, sysbus_get_default()); + qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2); + qdev_prop_set_uint32(sccdev, "scc-aid", 0x02000008); + qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id); + object_property_set_bool(OBJECT(scc), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(sccdev), 0); +} + +static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + MPS2FPGAIO *fpgaio = opaque; + + object_initialize(fpgaio, sizeof(mms->fpgaio), TYPE_MPS2_FPGAIO); + qdev_set_parent_bus(DEVICE(fpgaio), sysbus_get_default()); + object_property_set_bool(OBJECT(fpgaio), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(fpgaio), 0); +} + +static void mps2tz_common_init(MachineState *machine) +{ + MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine); + MachineClass *mc = MACHINE_GET_CLASS(machine); + MemoryRegion *system_memory = get_system_memory(); + DeviceState *iotkitdev; + DeviceState *dev_splitter; + int i; + + if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { + error_report("This board can only be used with CPU %s", + mc->default_cpu_type); + exit(1); + } + + init_sysbus_child(OBJECT(machine), "iotkit", &mms->iotkit, + sizeof(mms->iotkit), TYPE_IOTKIT); + iotkitdev = DEVICE(&mms->iotkit); + object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory), + "memory", &error_abort); + qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", 92); + qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + object_property_set_bool(OBJECT(&mms->iotkit), true, "realized", + &error_fatal); + + /* The sec_resp_cfg output from the IoTKit must be split into multiple + * lines, one for each of the PPCs we create here. + */ + object_initialize(&mms->sec_resp_splitter, sizeof(mms->sec_resp_splitter), + TYPE_SPLIT_IRQ); + object_property_add_child(OBJECT(machine), "sec-resp-splitter", + OBJECT(&mms->sec_resp_splitter), &error_abort); + object_property_set_int(OBJECT(&mms->sec_resp_splitter), 5, + "num-lines", &error_fatal); + object_property_set_bool(OBJECT(&mms->sec_resp_splitter), true, + "realized", &error_fatal); + dev_splitter = DEVICE(&mms->sec_resp_splitter); + qdev_connect_gpio_out_named(iotkitdev, "sec_resp_cfg", 0, + qdev_get_gpio_in(dev_splitter, 0)); + + /* The IoTKit sets up much of the memory layout, including + * the aliases between secure and non-secure regions in the + * address space. The FPGA itself contains: + * + * 0x00000000..0x003fffff SSRAM1 + * 0x00400000..0x007fffff alias of SSRAM1 + * 0x28000000..0x283fffff 4MB SSRAM2 + SSRAM3 + * 0x40100000..0x4fffffff AHB Master Expansion 1 interface devices + * 0x80000000..0x80ffffff 16MB PSRAM + */ + + /* The FPGA images have an odd combination of different RAMs, + * because in hardware they are different implementations and + * connected to different buses, giving varying performance/size + * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily + * call the 16MB our "system memory", as it's the largest lump. + */ + memory_region_allocate_system_memory(&mms->psram, + NULL, "mps.ram", 0x01000000); + memory_region_add_subregion(system_memory, 0x80000000, &mms->psram); + + /* The SSRAM memories should all be behind Memory Protection Controllers, + * but we don't implement that yet. + */ + make_ram(&mms->ssram1, "mps.ssram1", 0x00000000, 0x00400000); + make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x00400000); + + make_ram(&mms->ssram23, "mps.ssram23", 0x28000000, 0x00400000); + + /* The overflow IRQs for all UARTs are ORed together. + * Tx, Rx and "combined" IRQs are sent to the NVIC separately. + * Create the OR gate for this. + */ + object_initialize(&mms->uart_irq_orgate, sizeof(mms->uart_irq_orgate), + TYPE_OR_IRQ); + object_property_add_child(OBJECT(mms), "uart-irq-orgate", + OBJECT(&mms->uart_irq_orgate), &error_abort); + object_property_set_int(OBJECT(&mms->uart_irq_orgate), 10, "num-lines", + &error_fatal); + object_property_set_bool(OBJECT(&mms->uart_irq_orgate), true, + "realized", &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_irq_orgate), 0, + qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 15)); + + /* Most of the devices in the FPGA are behind Peripheral Protection + * Controllers. The required order for initializing things is: + * + initialize the PPC + * + initialize, configure and realize downstream devices + * + connect downstream device MemoryRegions to the PPC + * + realize the PPC + * + map the PPC's MemoryRegions to the places in the address map + * where the downstream devices should appear + * + wire up the PPC's control lines to the IoTKit object + */ + + const PPCInfo ppcs[] = { { + .name = "apb_ppcexp0", + .ports = { + { "ssram-mpc0", make_unimp_dev, &mms->ssram_mpc[0], + 0x58007000, 0x1000 }, + { "ssram-mpc1", make_unimp_dev, &mms->ssram_mpc[1], + 0x58008000, 0x1000 }, + { "ssram-mpc2", make_unimp_dev, &mms->ssram_mpc[2], + 0x58009000, 0x1000 }, + }, + }, { + .name = "apb_ppcexp1", + .ports = { + { "spi0", make_unimp_dev, &mms->spi[0], 0x40205000, 0x1000 }, + { "spi1", make_unimp_dev, &mms->spi[1], 0x40206000, 0x1000 }, + { "spi2", make_unimp_dev, &mms->spi[2], 0x40209000, 0x1000 }, + { "spi3", make_unimp_dev, &mms->spi[3], 0x4020a000, 0x1000 }, + { "spi4", make_unimp_dev, &mms->spi[4], 0x4020b000, 0x1000 }, + { "uart0", make_uart, &mms->uart[0], 0x40200000, 0x1000 }, + { "uart1", make_uart, &mms->uart[1], 0x40201000, 0x1000 }, + { "uart2", make_uart, &mms->uart[2], 0x40202000, 0x1000 }, + { "uart3", make_uart, &mms->uart[3], 0x40203000, 0x1000 }, + { "uart4", make_uart, &mms->uart[4], 0x40204000, 0x1000 }, + { "i2c0", make_unimp_dev, &mms->i2c[0], 0x40207000, 0x1000 }, + { "i2c1", make_unimp_dev, &mms->i2c[1], 0x40208000, 0x1000 }, + { "i2c2", make_unimp_dev, &mms->i2c[2], 0x4020c000, 0x1000 }, + { "i2c3", make_unimp_dev, &mms->i2c[3], 0x4020d000, 0x1000 }, + }, + }, { + .name = "apb_ppcexp2", + .ports = { + { "scc", make_scc, &mms->scc, 0x40300000, 0x1000 }, + { "i2s-audio", make_unimp_dev, &mms->i2s_audio, + 0x40301000, 0x1000 }, + { "fpgaio", make_fpgaio, &mms->fpgaio, 0x40302000, 0x1000 }, + }, + }, { + .name = "ahb_ppcexp0", + .ports = { + { "gfx", make_unimp_dev, &mms->gfx, 0x41000000, 0x140000 }, + { "gpio0", make_unimp_dev, &mms->gpio[0], 0x40100000, 0x1000 }, + { "gpio1", make_unimp_dev, &mms->gpio[1], 0x40101000, 0x1000 }, + { "gpio2", make_unimp_dev, &mms->gpio[2], 0x40102000, 0x1000 }, + { "gpio3", make_unimp_dev, &mms->gpio[3], 0x40103000, 0x1000 }, + { "gpio4", make_unimp_dev, &mms->gpio[4], 0x40104000, 0x1000 }, + }, + }, { + .name = "ahb_ppcexp1", + .ports = { + { "dma0", make_unimp_dev, &mms->dma[0], 0x40110000, 0x1000 }, + { "dma1", make_unimp_dev, &mms->dma[1], 0x40111000, 0x1000 }, + { "dma2", make_unimp_dev, &mms->dma[2], 0x40112000, 0x1000 }, + { "dma3", make_unimp_dev, &mms->dma[3], 0x40113000, 0x1000 }, + }, + }, + }; + + for (i = 0; i < ARRAY_SIZE(ppcs); i++) { + const PPCInfo *ppcinfo = &ppcs[i]; + TZPPC *ppc = &mms->ppc[i]; + DeviceState *ppcdev; + int port; + char *gpioname; + + init_sysbus_child(OBJECT(machine), ppcinfo->name, ppc, + sizeof(TZPPC), TYPE_TZ_PPC); + ppcdev = DEVICE(ppc); + + for (port = 0; port < TZ_NUM_PORTS; port++) { + const PPCPortInfo *pinfo = &ppcinfo->ports[port]; + MemoryRegion *mr; + char *portname; + + if (!pinfo->devfn) { + continue; + } + + mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size); + portname = g_strdup_printf("port[%d]", port); + object_property_set_link(OBJECT(ppc), OBJECT(mr), + portname, &error_fatal); + g_free(portname); + } + + object_property_set_bool(OBJECT(ppc), true, "realized", &error_fatal); + + for (port = 0; port < TZ_NUM_PORTS; port++) { + const PPCPortInfo *pinfo = &ppcinfo->ports[port]; + + if (!pinfo->devfn) { + continue; + } + sysbus_mmio_map(SYS_BUS_DEVICE(ppc), port, pinfo->addr); + + gpioname = g_strdup_printf("%s_nonsec", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, port, + qdev_get_gpio_in_named(ppcdev, + "cfg_nonsec", + port)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_ap", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, port, + qdev_get_gpio_in_named(ppcdev, + "cfg_ap", port)); + g_free(gpioname); + } + + gpioname = g_strdup_printf("%s_irq_enable", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, 0, + qdev_get_gpio_in_named(ppcdev, + "irq_enable", 0)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_clear", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, 0, + qdev_get_gpio_in_named(ppcdev, + "irq_clear", 0)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_status", ppcinfo->name); + qdev_connect_gpio_out_named(ppcdev, "irq", 0, + qdev_get_gpio_in_named(iotkitdev, + gpioname, 0)); + g_free(gpioname); + + qdev_connect_gpio_out(dev_splitter, i, + qdev_get_gpio_in_named(ppcdev, + "cfg_sec_resp", 0)); + } + + /* In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + * The ethernet controller is not behind a PPC. + */ + lan9118_init(&nd_table[0], 0x42000000, + qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 16)); + + create_unimplemented_device("FPGA NS PC", 0x48007000, 0x1000); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, 0x400000); +} + +static void mps2tz_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps2tz_common_init; + mc->max_cpus = 1; +} + +static void mps2tz_an505_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); + + mc->desc = "ARM MPS2 with AN505 FPGA image for Cortex-M33"; + mmc->fpga_type = FPGA_AN505; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m33"); + mmc->scc_id = 0x41040000 | (505 << 4); +} + +static const TypeInfo mps2tz_info = { + .name = TYPE_MPS2TZ_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS2TZMachineState), + .class_size = sizeof(MPS2TZMachineClass), + .class_init = mps2tz_class_init, +}; + +static const TypeInfo mps2tz_an505_info = { + .name = TYPE_MPS2TZ_AN505_MACHINE, + .parent = TYPE_MPS2TZ_MACHINE, + .class_init = mps2tz_an505_class_init, +}; + +static void mps2tz_machine_init(void) +{ + type_register_static(&mps2tz_info); + type_register_static(&mps2tz_an505_info); +} + +type_init(mps2tz_machine_init); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ }; diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_SHA512, ARM_HWCAP_A64_SHA512); GET_FEATURE(ARM_FEATURE_V8_FP16, ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); + GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Include the U bit in the switches rather than testing separately. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 129 +++++++++++++++++++++------------------------ 1 file changed, 61 insertions(+), 68 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int index; TCGv_ptr fpst; - switch (opcode) { - case 0x0: /* MLA */ - case 0x4: /* MLS */ - if (!u || is_scalar) { + switch (16 * u + opcode) { + case 0x08: /* MUL */ + case 0x10: /* MLA */ + case 0x14: /* MLS */ + if (is_scalar) { unallocated_encoding(s); return; } break; - case 0x2: /* SMLAL, SMLAL2, UMLAL, UMLAL2 */ - case 0x6: /* SMLSL, SMLSL2, UMLSL, UMLSL2 */ - case 0xa: /* SMULL, SMULL2, UMULL, UMULL2 */ + case 0x02: /* SMLAL, SMLAL2 */ + case 0x12: /* UMLAL, UMLAL2 */ + case 0x06: /* SMLSL, SMLSL2 */ + case 0x16: /* UMLSL, UMLSL2 */ + case 0x0a: /* SMULL, SMULL2 */ + case 0x1a: /* UMULL, UMULL2 */ if (is_scalar) { unallocated_encoding(s); return; } is_long = true; break; - case 0x3: /* SQDMLAL, SQDMLAL2 */ - case 0x7: /* SQDMLSL, SQDMLSL2 */ - case 0xb: /* SQDMULL, SQDMULL2 */ + case 0x03: /* SQDMLAL, SQDMLAL2 */ + case 0x07: /* SQDMLSL, SQDMLSL2 */ + case 0x0b: /* SQDMULL, SQDMULL2 */ is_long = true; - /* fall through */ - case 0xc: /* SQDMULH */ - case 0xd: /* SQRDMULH */ - if (u) { - unallocated_encoding(s); - return; - } break; - case 0x8: /* MUL */ - if (u || is_scalar) { - unallocated_encoding(s); - return; - } + case 0x0c: /* SQDMULH */ + case 0x0d: /* SQRDMULH */ break; - case 0x1: /* FMLA */ - case 0x5: /* FMLS */ - if (u) { - unallocated_encoding(s); - return; - } - /* fall through */ - case 0x9: /* FMUL, FMULX */ + case 0x01: /* FMLA */ + case 0x05: /* FMLS */ + case 0x09: /* FMUL */ + case 0x19: /* FMULX */ if (size == 1) { unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) read_vec_element(s, tcg_op, rn, pass, MO_64); - switch (opcode) { - case 0x5: /* FMLS */ + switch (16 * u + opcode) { + case 0x05: /* FMLS */ /* As usual for ARM, separate negation for fused multiply-add */ gen_helper_vfp_negd(tcg_op, tcg_op); /* fall through */ - case 0x1: /* FMLA */ + case 0x01: /* FMLA */ read_vec_element(s, tcg_res, rd, pass, MO_64); gen_helper_vfp_muladdd(tcg_res, tcg_op, tcg_idx, tcg_res, fpst); break; - case 0x9: /* FMUL, FMULX */ - if (u) { - gen_helper_vfp_mulxd(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muld(tcg_res, tcg_op, tcg_idx, fpst); - } + case 0x09: /* FMUL */ + gen_helper_vfp_muld(tcg_res, tcg_op, tcg_idx, fpst); + break; + case 0x19: /* FMULX */ + gen_helper_vfp_mulxd(tcg_res, tcg_op, tcg_idx, fpst); break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) read_vec_element_i32(s, tcg_op, rn, pass, is_scalar ? size : MO_32); - switch (opcode) { - case 0x0: /* MLA */ - case 0x4: /* MLS */ - case 0x8: /* MUL */ + switch (16 * u + opcode) { + case 0x08: /* MUL */ + case 0x10: /* MLA */ + case 0x14: /* MLS */ { static NeonGenTwoOpFn * const fns[2][2] = { { gen_helper_neon_add_u16, gen_helper_neon_sub_u16 }, @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) genfn(tcg_res, tcg_op, tcg_res); break; } - case 0x5: /* FMLS */ - case 0x1: /* FMLA */ + case 0x05: /* FMLS */ + case 0x01: /* FMLA */ read_vec_element_i32(s, tcg_res, rd, pass, is_scalar ? size : MO_32); switch (size) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) g_assert_not_reached(); } break; - case 0x9: /* FMUL, FMULX */ + case 0x09: /* FMUL */ switch (size) { case 1: - if (u) { - if (is_scalar) { - gen_helper_advsimd_mulxh(tcg_res, tcg_op, - tcg_idx, fpst); - } else { - gen_helper_advsimd_mulx2h(tcg_res, tcg_op, - tcg_idx, fpst); - } + if (is_scalar) { + gen_helper_advsimd_mulh(tcg_res, tcg_op, + tcg_idx, fpst); } else { - if (is_scalar) { - gen_helper_advsimd_mulh(tcg_res, tcg_op, - tcg_idx, fpst); - } else { - gen_helper_advsimd_mul2h(tcg_res, tcg_op, - tcg_idx, fpst); - } + gen_helper_advsimd_mul2h(tcg_res, tcg_op, + tcg_idx, fpst); } break; case 2: - if (u) { - gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); - } + gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); break; default: g_assert_not_reached(); } break; - case 0xc: /* SQDMULH */ + case 0x19: /* FMULX */ + switch (size) { + case 1: + if (is_scalar) { + gen_helper_advsimd_mulxh(tcg_res, tcg_op, + tcg_idx, fpst); + } else { + gen_helper_advsimd_mulx2h(tcg_res, tcg_op, + tcg_idx, fpst); + } + break; + case 2: + gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); + break; + default: + g_assert_not_reached(); + } + break; + case 0x0c: /* SQDMULH */ if (size == 1) { gen_helper_neon_qdmulh_s16(tcg_res, cpu_env, tcg_op, tcg_idx); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) tcg_op, tcg_idx); } break; - case 0xd: /* SQRDMULH */ + case 0x0d: /* SQRDMULH */ if (size == 1) { gen_helper_neon_qrdmulh_s16(tcg_res, cpu_env, tcg_op, tcg_idx); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> The integer size check was already outside of the opcode switch; move the floating-point size check outside as well. Unify the size vs index adjustment between fp and integer paths. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 65 +++++++++++++++++++++++----------------------- 1 file changed, 32 insertions(+), 33 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x05: /* FMLS */ case 0x09: /* FMUL */ case 0x19: /* FMULX */ - if (size == 1) { - unallocated_encoding(s); - return; - } is_fp = true; break; default: @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) if (is_fp) { /* convert insn encoded size to TCGMemOp size */ switch (size) { - case 2: /* single precision */ - size = MO_32; - index = h << 1 | l; - rm |= (m << 4); - break; - case 3: /* double precision */ - size = MO_64; - if (l || !is_q) { + case 0: /* half-precision */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { unallocated_encoding(s); return; } - index = h; - rm |= (m << 4); - break; - case 0: /* half precision */ size = MO_16; - index = h << 2 | l << 1 | m; - is_fp16 = true; - if (arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { - break; - } - /* fallthru */ - default: /* unallocated */ - unallocated_encoding(s); - return; - } - } else { - switch (size) { - case 1: - index = h << 2 | l << 1 | m; break; - case 2: - index = h << 1 | l; - rm |= (m << 4); + case MO_32: /* single precision */ + case MO_64: /* double precision */ break; default: unallocated_encoding(s); return; } + } else { + switch (size) { + case MO_8: + case MO_64: + unallocated_encoding(s); + return; + } + } + + /* Given TCGMemOp size, adjust register and indexing. */ + switch (size) { + case MO_16: + index = h << 2 | l << 1 | m; + break; + case MO_32: + index = h << 1 | l; + rm |= m << 4; + break; + case MO_64: + if (l || !is_q) { + unallocated_encoding(s); + return; + } + index = h; + rm |= m << 4; + break; + default: + g_assert_not_reached(); } if (!fp_access_check(s)) { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 2 +- target/arm/helper.h | 4 ++ target/arm/translate-a64.c | 84 ++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 109 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 198 insertions(+), 1 deletion(-) create mode 100644 target/arm/vec_helper.c diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o obj-y += translate.o op_helper.o helper.o cpu.o -obj-y += neon_helper.o iwmmxt_helper.o +obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o obj-y += gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o translate-a64.o helper-a64.o gdbstub64.o obj-y += crypto_helper.o diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(neon_rbit_u8, TCG_CALL_NO_RWG_SE, i32, i32) DEF_HELPER_3(neon_qdmulh_s16, i32, env, i32, i32) DEF_HELPER_3(neon_qrdmulh_s16, i32, env, i32, i32) +DEF_HELPER_4(neon_qrdmlah_s16, i32, env, i32, i32, i32) +DEF_HELPER_4(neon_qrdmlsh_s16, i32, env, i32, i32, i32) DEF_HELPER_3(neon_qdmulh_s32, i32, env, i32, i32) DEF_HELPER_3(neon_qrdmulh_s32, i32, env, i32, i32) +DEF_HELPER_4(neon_qrdmlah_s32, i32, env, s32, s32, s32) +DEF_HELPER_4(neon_qrdmlsh_s32, i32, env, s32, s32, s32) DEF_HELPER_1(neon_narrow_u8, i32, i64) DEF_HELPER_1(neon_narrow_u16, i32, i64) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_three_reg_same_fp16(DisasContext *s, tcg_temp_free_ptr(fpst); } +/* AdvSIMD scalar three same extra + * 31 30 29 28 24 23 22 21 20 16 15 14 11 10 9 5 4 0 + * +-----+---+-----------+------+---+------+---+--------+---+----+----+ + * | 0 1 | U | 1 1 1 1 0 | size | 0 | Rm | 1 | opcode | 1 | Rn | Rd | + * +-----+---+-----------+------+---+------+---+--------+---+----+----+ + */ +static void disas_simd_scalar_three_reg_same_extra(DisasContext *s, + uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 4); + int rm = extract32(insn, 16, 5); + int size = extract32(insn, 22, 2); + bool u = extract32(insn, 29, 1); + TCGv_i32 ele1, ele2, ele3; + TCGv_i64 res; + int feature; + + switch (u * 16 + opcode) { + case 0x10: /* SQRDMLAH (vector) */ + case 0x11: /* SQRDMLSH (vector) */ + if (size != 1 && size != 2) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_RDM; + break; + default: + unallocated_encoding(s); + return; + } + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + + /* Do a single operation on the lowest element in the vector. + * We use the standard Neon helpers and rely on 0 OP 0 == 0 + * with no side effects for all these operations. + * OPTME: special-purpose helpers would avoid doing some + * unnecessary work in the helper for the 16 bit cases. + */ + ele1 = tcg_temp_new_i32(); + ele2 = tcg_temp_new_i32(); + ele3 = tcg_temp_new_i32(); + + read_vec_element_i32(s, ele1, rn, 0, size); + read_vec_element_i32(s, ele2, rm, 0, size); + read_vec_element_i32(s, ele3, rd, 0, size); + + switch (opcode) { + case 0x0: /* SQRDMLAH */ + if (size == 1) { + gen_helper_neon_qrdmlah_s16(ele3, cpu_env, ele1, ele2, ele3); + } else { + gen_helper_neon_qrdmlah_s32(ele3, cpu_env, ele1, ele2, ele3); + } + break; + case 0x1: /* SQRDMLSH */ + if (size == 1) { + gen_helper_neon_qrdmlsh_s16(ele3, cpu_env, ele1, ele2, ele3); + } else { + gen_helper_neon_qrdmlsh_s32(ele3, cpu_env, ele1, ele2, ele3); + } + break; + default: + g_assert_not_reached(); + } + tcg_temp_free_i32(ele1); + tcg_temp_free_i32(ele2); + + res = tcg_temp_new_i64(); + tcg_gen_extu_i32_i64(res, ele3); + tcg_temp_free_i32(ele3); + + write_fp_dreg(s, rd, res); + tcg_temp_free_i64(res); +} + static void handle_2misc_64(DisasContext *s, int opcode, bool u, TCGv_i64 tcg_rd, TCGv_i64 tcg_rn, TCGv_i32 tcg_rmode, TCGv_ptr tcg_fpstatus) @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0x0e000800, 0xbf208c00, disas_simd_zip_trn }, { 0x2e000000, 0xbf208400, disas_simd_ext }, { 0x5e200400, 0xdf200400, disas_simd_scalar_three_reg_same }, + { 0x5e008400, 0xdf208400, disas_simd_scalar_three_reg_same_extra }, { 0x5e200000, 0xdf200c00, disas_simd_scalar_three_reg_diff }, { 0x5e200800, 0xdf3e0c00, disas_simd_scalar_two_reg_misc }, { 0x5e300800, 0xdf3e0c00, disas_simd_scalar_pairwise }, diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM AdvSIMD / SVE Vector Operations + * + * Copyright (c) 2018 Linaro + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "exec/exec-all.h" +#include "exec/helper-proto.h" +#include "tcg/tcg-gvec-desc.h" + + +#define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q + +/* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ +static uint16_t inl_qrdmlah_s16(CPUARMState *env, int16_t src1, + int16_t src2, int16_t src3) +{ + /* Simplify: + * = ((a3 << 16) + ((e1 * e2) << 1) + (1 << 15)) >> 16 + * = ((a3 << 15) + (e1 * e2) + (1 << 14)) >> 15 + */ + int32_t ret = (int32_t)src1 * src2; + ret = ((int32_t)src3 << 15) + ret + (1 << 14); + ret >>= 15; + if (ret != (int16_t)ret) { + SET_QC(); + ret = (ret < 0 ? -0x8000 : 0x7fff); + } + return ret; +} + +uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, + uint32_t src2, uint32_t src3) +{ + uint16_t e1 = inl_qrdmlah_s16(env, src1, src2, src3); + uint16_t e2 = inl_qrdmlah_s16(env, src1 >> 16, src2 >> 16, src3 >> 16); + return deposit32(e1, 16, 16, e2); +} + +/* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ +static uint16_t inl_qrdmlsh_s16(CPUARMState *env, int16_t src1, + int16_t src2, int16_t src3) +{ + /* Similarly, using subtraction: + * = ((a3 << 16) - ((e1 * e2) << 1) + (1 << 15)) >> 16 + * = ((a3 << 15) - (e1 * e2) + (1 << 14)) >> 15 + */ + int32_t ret = (int32_t)src1 * src2; + ret = ((int32_t)src3 << 15) - ret + (1 << 14); + ret >>= 15; + if (ret != (int16_t)ret) { + SET_QC(); + ret = (ret < 0 ? -0x8000 : 0x7fff); + } + return ret; +} + +uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, + uint32_t src2, uint32_t src3) +{ + uint16_t e1 = inl_qrdmlsh_s16(env, src1, src2, src3); + uint16_t e2 = inl_qrdmlsh_s16(env, src1 >> 16, src2 >> 16, src3 >> 16); + return deposit32(e1, 16, 16, e2); +} + +/* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ +uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, + int32_t src2, int32_t src3) +{ + /* Simplify similarly to int_qrdmlah_s16 above. */ + int64_t ret = (int64_t)src1 * src2; + ret = ((int64_t)src3 << 31) + ret + (1 << 30); + ret >>= 31; + if (ret != (int32_t)ret) { + SET_QC(); + ret = (ret < 0 ? INT32_MIN : INT32_MAX); + } + return ret; +} + +/* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ +uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, + int32_t src2, int32_t src3) +{ + /* Simplify similarly to int_qrdmlsh_s16 above. */ + int64_t ret = (int64_t)src1 * src2; + ret = ((int64_t)src3 << 31) - ret + (1 << 30); + ret >>= 31; + if (ret != (int32_t)ret) { + SET_QC(); + ret = (ret < 0 ? INT32_MIN : INT32_MAX); + } + return ret; +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 9 +++++ target/arm/translate-a64.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 74 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 166 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_2(neon_pmull_64_lo, TCG_CALL_NO_RWG_SE, i64, i64, i64) DEF_HELPER_FLAGS_2(neon_pmull_64_hi, TCG_CALL_NO_RWG_SE, i64, i64, i64) +DEF_HELPER_FLAGS_5(gvec_qrdmlah_s16, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s16, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3(DisasContext *s, bool is_q, int rd, vec_full_reg_size(s), gvec_op); } +/* Expand a 3-operand + env pointer operation using + * an out-of-line helper. + */ +static void gen_gvec_op3_env(DisasContext *s, bool is_q, int rd, + int rn, int rm, gen_helper_gvec_3_ptr *fn) +{ + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), cpu_env, + is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) clear_vec_high(s, is_q, rd); } +/* AdvSIMD three same extra + * 31 30 29 28 24 23 22 21 20 16 15 14 11 10 9 5 4 0 + * +---+---+---+-----------+------+---+------+---+--------+---+----+----+ + * | 0 | Q | U | 0 1 1 1 0 | size | 0 | Rm | 1 | opcode | 1 | Rn | Rd | + * +---+---+---+-----------+------+---+------+---+--------+---+----+----+ + */ +static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 4); + int rm = extract32(insn, 16, 5); + int size = extract32(insn, 22, 2); + bool u = extract32(insn, 29, 1); + bool is_q = extract32(insn, 30, 1); + int feature; + + switch (u * 16 + opcode) { + case 0x10: /* SQRDMLAH (vector) */ + case 0x11: /* SQRDMLSH (vector) */ + if (size != 1 && size != 2) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_RDM; + break; + default: + unallocated_encoding(s); + return; + } + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + + switch (opcode) { + case 0x0: /* SQRDMLAH (vector) */ + switch (size) { + case 1: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlah_s16); + break; + case 2: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlah_s32); + break; + default: + g_assert_not_reached(); + } + return; + + case 0x1: /* SQRDMLSH (vector) */ + switch (size) { + case 1: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlsh_s16); + break; + case 2: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlsh_s32); + break; + default: + g_assert_not_reached(); + } + return; + + default: + g_assert_not_reached(); + } +} + static void handle_2misc_widening(DisasContext *s, int opcode, bool is_q, int size, int rn, int rd) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) static const AArch64DecodeTable data_proc_simd[] = { /* pattern , mask , fn */ { 0x0e200400, 0x9f200400, disas_simd_three_reg_same }, + { 0x0e008400, 0x9f208400, disas_simd_three_reg_same_extra }, { 0x0e200000, 0x9f200c00, disas_simd_three_reg_diff }, { 0x0e200800, 0x9f3e0c00, disas_simd_two_reg_misc }, { 0x0e300800, 0x9f3e0c00, disas_simd_across_lanes }, diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q +static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) +{ + uint64_t *d = vd + opr_sz; + uintptr_t i; + + for (i = opr_sz; i < max_sz; i += 8) { + *d++ = 0; + } +} + /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ static uint16_t inl_qrdmlah_s16(CPUARMState *env, int16_t src1, int16_t src2, int16_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, return deposit32(e1, 16, 16, e2); } +void HELPER(gvec_qrdmlah_s16)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int16_t *d = vd; + int16_t *n = vn; + int16_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = inl_qrdmlah_s16(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ static uint16_t inl_qrdmlsh_s16(CPUARMState *env, int16_t src1, int16_t src2, int16_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, return deposit32(e1, 16, 16, e2); } +void HELPER(gvec_qrdmlsh_s16)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int16_t *d = vd; + int16_t *n = vn; + int16_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = inl_qrdmlsh_s16(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, return ret; } +void HELPER(gvec_qrdmlah_s32)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int32_t *d = vd; + int32_t *n = vn; + int32_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = helper_neon_qrdmlah_s32(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, } return ret; } + +void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int32_t *d = vd; + int32_t *n = vn; + int32_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = helper_neon_qrdmlsh_s32(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x19: /* FMULX */ is_fp = true; break; + case 0x1d: /* SQRDMLAH */ + case 0x1f: /* SQRDMLSH */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + unallocated_encoding(s); + return; + } + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) tcg_op, tcg_idx); } break; + case 0x1d: /* SQRDMLAH */ + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + if (size == 1) { + gen_helper_neon_qrdmlah_s16(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } else { + gen_helper_neon_qrdmlah_s32(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } + break; + case 0x1f: /* SQRDMLSH */ + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + if (size == 1) { + gen_helper_neon_qrdmlsh_s16(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } else { + gen_helper_neon_qrdmlsh_s32(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } + break; default: g_assert_not_reached(); } -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 86 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 19 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ #include "disas/disas.h" #include "exec/exec-all.h" #include "tcg-op.h" +#include "tcg-op-gvec.h" #include "qemu/log.h" #include "qemu/bitops.h" #include "arm_ldst.h" @@ -XXX,XX +XXX,XX @@ static void gen_neon_narrow_op(int op, int u, int size, #define NEON_3R_VPMAX 20 #define NEON_3R_VPMIN 21 #define NEON_3R_VQDMULH_VQRDMULH 22 -#define NEON_3R_VPADD 23 +#define NEON_3R_VPADD_VQRDMLAH 23 #define NEON_3R_SHA 24 /* SHA1C,SHA1P,SHA1M,SHA1SU0,SHA256H{2},SHA256SU1 */ -#define NEON_3R_VFM 25 /* VFMA, VFMS : float fused multiply-add */ +#define NEON_3R_VFM_VQRDMLSH 25 /* VFMA, VFMS, VQRDMLSH */ #define NEON_3R_FLOAT_ARITH 26 /* float VADD, VSUB, VPADD, VABD */ #define NEON_3R_FLOAT_MULTIPLY 27 /* float VMLA, VMLS, VMUL */ #define NEON_3R_FLOAT_CMP 28 /* float VCEQ, VCGE, VCGT */ @@ -XXX,XX +XXX,XX @@ static const uint8_t neon_3r_sizes[] = { [NEON_3R_VPMAX] = 0x7, [NEON_3R_VPMIN] = 0x7, [NEON_3R_VQDMULH_VQRDMULH] = 0x6, - [NEON_3R_VPADD] = 0x7, + [NEON_3R_VPADD_VQRDMLAH] = 0x7, [NEON_3R_SHA] = 0xf, /* size field encodes op type */ - [NEON_3R_VFM] = 0x5, /* size bit 1 encodes op */ + [NEON_3R_VFM_VQRDMLSH] = 0x7, /* For VFM, size bit 1 encodes op */ [NEON_3R_FLOAT_ARITH] = 0x5, /* size bit 1 encodes op */ [NEON_3R_FLOAT_MULTIPLY] = 0x5, /* size bit 1 encodes op */ [NEON_3R_FLOAT_CMP] = 0x5, /* size bit 1 encodes op */ @@ -XXX,XX +XXX,XX @@ static const uint8_t neon_2rm_sizes[] = { [NEON_2RM_VCVT_UF] = 0x4, }; + +/* Expand v8.1 simd helper. */ +static int do_v81_helper(DisasContext *s, gen_helper_gvec_3_ptr *fn, + int q, int rd, int rn, int rm) +{ + if (arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + int opr_sz = (1 + q) * 8; + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), cpu_env, + opr_sz, opr_sz, 0, fn); + return 0; + } + return 1; +} + /* Translate a NEON data processing instruction. Return nonzero if the instruction is invalid. We process data in a mixture of 32-bit and 64-bit chunks. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (q && ((rd | rn | rm) & 1)) { return 1; } - /* - * The SHA-1/SHA-256 3-register instructions require special treatment - * here, as their size field is overloaded as an op type selector, and - * they all consume their input in a single pass. - */ - if (op == NEON_3R_SHA) { + switch (op) { + case NEON_3R_SHA: + /* The SHA-1/SHA-256 3-register instructions require special + * treatment here, as their size field is overloaded as an + * op type selector, and they all consume their input in a + * single pass. + */ if (!q) { return 1; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(ptr2); tcg_temp_free_ptr(ptr3); return 0; + + case NEON_3R_VPADD_VQRDMLAH: + if (!u) { + break; /* VPADD */ + } + /* VQRDMLAH */ + switch (size) { + case 1: + return do_v81_helper(s, gen_helper_gvec_qrdmlah_s16, + q, rd, rn, rm); + case 2: + return do_v81_helper(s, gen_helper_gvec_qrdmlah_s32, + q, rd, rn, rm); + } + return 1; + + case NEON_3R_VFM_VQRDMLSH: + if (!u) { + /* VFM, VFMS */ + if (size == 1) { + return 1; + } + break; + } + /* VQRDMLSH */ + switch (size) { + case 1: + return do_v81_helper(s, gen_helper_gvec_qrdmlsh_s16, + q, rd, rn, rm); + case 2: + return do_v81_helper(s, gen_helper_gvec_qrdmlsh_s32, + q, rd, rn, rm); + } + return 1; } if (size == 3 && op != NEON_3R_LOGIC) { /* 64-bit element instructions. */ @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) rm = rtmp; } break; - case NEON_3R_VPADD: - if (u) { - return 1; - } - /* Fall through */ + case NEON_3R_VPADD_VQRDMLAH: case NEON_3R_VPMAX: case NEON_3R_VPMIN: pairwise = 1; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 1; } break; - case NEON_3R_VFM: - if (!arm_dc_feature(s, ARM_FEATURE_VFP4) || u) { + case NEON_3R_VFM_VQRDMLSH: + if (!arm_dc_feature(s, ARM_FEATURE_VFP4)) { return 1; } break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } } break; - case NEON_3R_VPADD: + case NEON_3R_VPADD_VQRDMLAH: switch (size) { case 0: gen_helper_neon_padd_u8(tmp, tmp, tmp2); break; case 1: gen_helper_neon_padd_u16(tmp, tmp, tmp2); break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } } break; - case NEON_3R_VFM: + case NEON_3R_VFM_VQRDMLSH: { /* VFMA, VFMS: fused multiply-add */ TCGv_ptr fpstatus = get_fpstatus_ptr(1); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 46 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 42 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static const char *regnames[] = { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12", "r13", "r14", "pc" }; +/* Function prototypes for gen_ functions calling Neon helpers. */ +typedef void NeonGenThreeOpEnvFn(TCGv_i32, TCGv_env, TCGv_i32, + TCGv_i32, TCGv_i32); + /* initialize TCG globals. */ void arm_translate_init(void) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } neon_store_reg64(cpu_V0, rd + pass); } - - break; - default: /* 14 and 15 are RESERVED */ - return 1; + case 14: /* VQRDMLAH scalar */ + case 15: /* VQRDMLSH scalar */ + { + NeonGenThreeOpEnvFn *fn; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + return 1; + } + if (u && ((rd | rn) & 1)) { + return 1; + } + if (op == 14) { + if (size == 1) { + fn = gen_helper_neon_qrdmlah_s16; + } else { + fn = gen_helper_neon_qrdmlah_s32; + } + } else { + if (size == 1) { + fn = gen_helper_neon_qrdmlsh_s16; + } else { + fn = gen_helper_neon_qrdmlsh_s32; + } + } + + tmp2 = neon_get_scalar(size, rm); + for (pass = 0; pass < (u ? 4 : 2); pass++) { + tmp = neon_load_reg(rn, pass); + tmp3 = neon_load_reg(rd, pass); + fn(tmp, cpu_env, tmp, tmp2, tmp3); + tcg_temp_free_i32(tmp3); + neon_store_reg(rd, pass, tmp); + } + tcg_temp_free_i32(tmp2); + } + break; + default: + g_assert_not_reached(); } } } else { /* size == 3 */ -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SHA256); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_RDM); cpu->midr = 0xffffffff; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SM4); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ + ARM_FEATURE_V8_FCMA, /* has complex number part of v8.3 extensions. */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_FP16, ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); + GET_FEATURE(ARM_FEATURE_V8_FCMA, ARM_HWCAP_A64_FCMA); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 7 ++++ target/arm/translate-a64.c | 48 ++++++++++++++++++++++- target/arm/vec_helper.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 151 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcaddh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcaddd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3_env(DisasContext *s, bool is_q, int rd, is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); } +/* Expand a 3-operand + fpstatus pointer + simd data value operation using + * an out-of-line helper. + */ +static void gen_gvec_op3_fpst(DisasContext *s, bool is_q, int rd, int rn, + int rm, bool is_fp16, int data, + gen_helper_gvec_3_ptr *fn) +{ + TCGv_ptr fpst = get_fpstatus_ptr(is_fp16); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), data, fn); + tcg_temp_free_ptr(fpst); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) int size = extract32(insn, 22, 2); bool u = extract32(insn, 29, 1); bool is_q = extract32(insn, 30, 1); - int feature; + int feature, rot; switch (u * 16 + opcode) { case 0x10: /* SQRDMLAH (vector) */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0xc: /* FCADD, #90 */ + case 0xe: /* FCADD, #270 */ + if (size == 0 + || (size == 1 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) + || (size == 3 && !is_q)) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_FCMA; + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0xc: /* FCADD, #90 */ + case 0xe: /* FCADD, #270 */ + rot = extract32(opcode, 1, 1); + switch (size) { + case 1: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcaddh); + break; + case 2: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcadds); + break; + case 3: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcaddd); + break; + default: + g_assert_not_reached(); + } + return; + default: g_assert_not_reached(); } diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/exec-all.h" #include "exec/helper-proto.h" #include "tcg/tcg-gvec-desc.h" +#include "fpu/softfloat.h" +/* Note that vector data is stored in host-endian 64-bit chunks, + so addressing units smaller than that needs a host-endian fixup. */ +#ifdef HOST_WORDS_BIGENDIAN +#define H1(x) ((x) ^ 7) +#define H2(x) ((x) ^ 3) +#define H4(x) ((x) ^ 1) +#else +#define H1(x) (x) +#define H2(x) (x) +#define H4(x) (x) +#endif + #define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_fcaddh)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + uint32_t neg_real = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e0 = n[H2(i)]; + float16 e1 = m[H2(i + 1)] ^ neg_imag; + float16 e2 = n[H2(i + 1)]; + float16 e3 = m[H2(i)] ^ neg_real; + + d[H2(i)] = float16_add(e0, e1, fpst); + d[H2(i + 1)] = float16_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcadds)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + uint32_t neg_real = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e0 = n[H4(i)]; + float32 e1 = m[H4(i + 1)] ^ neg_imag; + float32 e2 = n[H4(i + 1)]; + float32 e3 = m[H4(i)] ^ neg_real; + + d[H4(i)] = float32_add(e0, e1, fpst); + d[H4(i + 1)] = float32_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcaddd)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float64 *d = vd; + float64 *n = vn; + float64 *m = vm; + float_status *fpst = vfpst; + uint64_t neg_real = extract64(desc, SIMD_DATA_SHIFT, 1); + uint64_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 63; + neg_imag <<= 63; + + for (i = 0; i < opr_sz / 8; i += 2) { + float64 e0 = n[i]; + float64 e1 = m[i + 1] ^ neg_imag; + float64 e2 = n[i + 1]; + float64 e3 = m[i] ^ neg_real; + + d[i] = float64_add(e0, e1, fpst); + d[i + 1] = float64_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [PMM: renamed e1/e2/e3/e4 to use the same naming as the version of the pseudocode in the Arm ARM] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 11 ++++ target/arm/translate-a64.c | 94 +++++++++++++++++++++++++--- target/arm/vec_helper.c | 149 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_fcaddd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlah, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlah_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlas, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlas_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlad, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0x8: /* FCMLA, #0 */ + case 0x9: /* FCMLA, #90 */ + case 0xa: /* FCMLA, #180 */ + case 0xb: /* FCMLA, #270 */ case 0xc: /* FCADD, #90 */ case 0xe: /* FCADD, #270 */ if (size == 0 @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0x8: /* FCMLA, #0 */ + case 0x9: /* FCMLA, #90 */ + case 0xa: /* FCMLA, #180 */ + case 0xb: /* FCMLA, #270 */ + rot = extract32(opcode, 0, 2); + switch (size) { + case 1: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, true, rot, + gen_helper_gvec_fcmlah); + break; + case 2: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, false, rot, + gen_helper_gvec_fcmlas); + break; + case 3: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, false, rot, + gen_helper_gvec_fcmlad); + break; + default: + g_assert_not_reached(); + } + return; + case 0xc: /* FCADD, #90 */ case 0xe: /* FCADD, #270 */ rot = extract32(opcode, 1, 1); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool is_long = false; - bool is_fp = false; + int is_fp = 0; bool is_fp16 = false; int index; TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x05: /* FMLS */ case 0x09: /* FMUL */ case 0x19: /* FMULX */ - is_fp = true; + is_fp = 1; break; case 0x1d: /* SQRDMLAH */ case 0x1f: /* SQRDMLSH */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) return; } break; + case 0x11: /* FCMLA #0 */ + case 0x13: /* FCMLA #90 */ + case 0x15: /* FCMLA #180 */ + case 0x17: /* FCMLA #270 */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA)) { + unallocated_encoding(s); + return; + } + is_fp = 2; + break; default: unallocated_encoding(s); return; } - if (is_fp) { + switch (is_fp) { + case 1: /* normal fp */ /* convert insn encoded size to TCGMemOp size */ switch (size) { case 0: /* half-precision */ - if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { - unallocated_encoding(s); - return; - } size = MO_16; + is_fp16 = true; break; case MO_32: /* single precision */ case MO_64: /* double precision */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) unallocated_encoding(s); return; } - } else { + break; + + case 2: /* complex fp */ + /* Each indexable element is a complex pair. */ + size <<= 1; + switch (size) { + case MO_32: + if (h && !is_q) { + unallocated_encoding(s); + return; + } + is_fp16 = true; + break; + case MO_64: + break; + default: + unallocated_encoding(s); + return; + } + break; + + default: /* integer */ switch (size) { case MO_8: case MO_64: unallocated_encoding(s); return; } + break; + } + if (is_fp16 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; } /* Given TCGMemOp size, adjust register and indexing. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) fpst = NULL; } + switch (16 * u + opcode) { + case 0x11: /* FCMLA #0 */ + case 0x13: /* FCMLA #90 */ + case 0x15: /* FCMLA #180 */ + case 0x17: /* FCMLA #270 */ + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_reg_offset(s, rm, index, size), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), + extract32(insn, 13, 2), /* rot */ + size == MO_64 + ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + return; + } + if (size == 3) { TCGv_i64 tcg_idx = tcg_temp_new_i64(); int pass; diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcaddd)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_fcmlah)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e2 = n[H2(i + flip)]; + float16 e1 = m[H2(i + flip)] ^ neg_real; + float16 e4 = e2; + float16 e3 = m[H2(i + 1 - flip)] ^ neg_imag; + + d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); + d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlah_idx)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + float16 e1 = m[H2(flip)]; + float16 e3 = m[H2(1 - flip)]; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + e1 ^= neg_real; + e3 ^= neg_imag; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e2 = n[H2(i + flip)]; + float16 e4 = e2; + + d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); + d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlas)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e2 = n[H4(i + flip)]; + float32 e1 = m[H4(i + flip)] ^ neg_real; + float32 e4 = e2; + float32 e3 = m[H4(i + 1 - flip)] ^ neg_imag; + + d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); + d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlas_idx)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + float32 e1 = m[H4(flip)]; + float32 e3 = m[H4(1 - flip)]; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + e1 ^= neg_real; + e3 ^= neg_imag; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e2 = n[H4(i + flip)]; + float32 e4 = e2; + + d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); + d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlad)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float64 *d = vd; + float64 *n = vn; + float64 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint64_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint64_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 63; + neg_imag <<= 63; + + for (i = 0; i < opr_sz / 8; i += 2) { + float64 e2 = n[i + flip]; + float64 e1 = m[i + flip] ^ neg_real; + float64 e4 = e2; + float64 e3 = m[i + 1 - flip] ^ neg_imag; + + d[i] = float64_muladd(e2, e1, d[i], 0, fpst); + d[i + 1] = float64_muladd(e4, e3, d[i + 1], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 0; } +/* Advanced SIMD three registers of the same length extension. + * 31 25 23 22 20 16 12 11 10 9 8 3 0 + * +---------------+-----+---+-----+----+----+---+----+---+----+---------+----+ + * | 1 1 1 1 1 1 0 | op1 | D | op2 | Vn | Vd | 1 | o3 | 0 | o4 | N Q M U | Vm | + * +---------------+-----+---+-----+----+----+---+----+---+----+---------+----+ + */ +static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) +{ + gen_helper_gvec_3_ptr *fn_gvec_ptr; + int rd, rn, rm, rot, size, opr_sz; + TCGv_ptr fpst; + bool q; + + q = extract32(insn, 6, 1); + VFP_DREG_D(rd, insn); + VFP_DREG_N(rn, insn); + VFP_DREG_M(rm, insn); + if ((rd | rn | rm) & q) { + return 1; + } + + if ((insn & 0xfe200f10) == 0xfc200800) { + /* VCMLA -- 1111 110R R.1S .... .... 1000 ...0 .... */ + size = extract32(insn, 20, 1); + rot = extract32(insn, 23, 2); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + fn_gvec_ptr = size ? gen_helper_gvec_fcmlas : gen_helper_gvec_fcmlah; + } else if ((insn & 0xfea00f10) == 0xfc800800) { + /* VCADD -- 1111 110R 1.0S .... .... 1000 ...0 .... */ + size = extract32(insn, 20, 1); + rot = extract32(insn, 24, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + fn_gvec_ptr = size ? gen_helper_gvec_fcadds : gen_helper_gvec_fcaddh; + } else { + return 1; + } + + if (s->fp_excp_el) { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return 0; + } + if (!s->vfp_enabled) { + return 1; + } + + opr_sz = (1 + q) * 8; + fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, rot, fn_gvec_ptr); + tcg_temp_free_ptr(fpst); + return 0; +} + static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) } } } + } else if ((insn & 0x0e000a00) == 0x0c000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + if (disas_neon_insn_3same_ext(s, insn)) { + goto illegal_op; + } + return; } else if ((insn & 0x0fe00000) == 0x0c400000) { /* Coprocessor double register transfer. */ ARCH(5TE); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-15-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) return 0; } +/* Advanced SIMD two registers and a scalar extension. + * 31 24 23 22 20 16 12 11 10 9 8 3 0 + * +-----------------+----+---+----+----+----+---+----+---+----+---------+----+ + * | 1 1 1 1 1 1 1 0 | o1 | D | o2 | Vn | Vd | 1 | o3 | 0 | o4 | N Q M U | Vm | + * +-----------------+----+---+----+----+----+---+----+---+----+---------+----+ + * + */ + +static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn) +{ + int rd, rn, rm, rot, size, opr_sz; + TCGv_ptr fpst; + bool q; + + q = extract32(insn, 6, 1); + VFP_DREG_D(rd, insn); + VFP_DREG_N(rn, insn); + VFP_DREG_M(rm, insn); + if ((rd | rn) & q) { + return 1; + } + + if ((insn & 0xff000f10) == 0xfe000800) { + /* VCMLA (indexed) -- 1111 1110 S.RR .... .... 1000 ...0 .... */ + rot = extract32(insn, 20, 2); + size = extract32(insn, 23, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + } else { + return 1; + } + + if (s->fp_excp_el) { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return 0; + } + if (!s->vfp_enabled) { + return 1; + } + + opr_sz = (1 + q) * 8; + fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, rot, + size ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + return 0; +} + static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) goto illegal_op; } return; + } else if ((insn & 0x0f000a00) == 0x0e000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + if (disas_neon_insn_2reg_scalar_ext(s, insn)) { + goto illegal_op; + } + return; } else if ((insn & 0x0fe00000) == 0x0c400000) { /* Coprocessor double register transfer. */ ARCH(5TE); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Happily, the bits are in the same places compared to a32. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-16-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) default_exception_el(s)); break; } - if (((insn >> 24) & 3) == 3) { + if ((insn & 0xfe000a00) == 0xfc000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + /* The Thumb2 and ARM encodings are identical. */ + if (disas_neon_insn_3same_ext(s, insn)) { + goto illegal_op; + } + } else if ((insn & 0xff000a00) == 0xfe000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + /* The Thumb2 and ARM encodings are identical. */ + if (disas_neon_insn_2reg_scalar_ext(s, insn)) { + goto illegal_op; + } + } else if (((insn >> 24) & 3) == 3) { /* Translate into the equivalent ARM encoding. */ insn = (insn & 0xe2ffffff) | ((insn & (1 << 28)) >> 4) | (1 << 28); if (disas_neon_data_insn(s, insn)) { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); + set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); cpu->midr = 0xffffffff; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); + set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ } -- 2.16.2