[Qemu-devel] [PULL 00/12] target-arm queue
[PULL 00/35] target-arm queue
1
ARM queue: nothing particularly exciting here, but no
1
The following changes since commit 5767815218efd3cbfd409505ed824d5f356044ae:
2
reason to sit on them for another week.
3
2
4
thanks
3
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging (2024-02-14 15:45:52 +0000)
5
-- PMM
6
4
7
The following changes since commit 61eedf7aec0e2395aabd628cc055096909a3ea15:
5
are available in the Git repository at:
8
6
9
tests/prom-env: Ease time-out problems on slow hosts (2017-02-10 15:44:53 +0000)
7
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240215
10
8
11
are available in the git repository at:
9
for you to fetch changes up to f780e63fe731b058fe52d43653600d8729a1b5f2:
12
10
13
git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170210
11
docs: Add documentation for the mps3-an536 board (2024-02-15 14:32:39 +0000)
14
15
for you to fetch changes up to b4cc583f0285a2e1e78621dfba142f00ca47414a:
16
17
aspeed/smc: use a modulo to check segment limits (2017-02-10 17:40:30 +0000)
18
12
19
----------------------------------------------------------------
13
----------------------------------------------------------------
20
target-arm queue:
14
target-arm queue:
21
* aspeed: minor fixes
15
* hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC
22
* virt: declare fwcfg and virtio-mmio as DMA coherent in DT & ACPI
16
* linux-user/aarch64: Choose SYNC as the preferred MTE mode
23
* arm: enable basic TCG emulation of PMU for AArch64
17
* Fix some errors in SVE/SME handling of MTE tags
18
* hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses
19
* hw/block/tc58128: Don't emit deprecation warning under qtest
20
* tests/qtest: Fix handling of npcm7xx and GMAC tests
21
* hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ
22
* tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend
23
* Don't assert on vmload/vmsave of M-profile CPUs
24
* hw/arm/smmuv3: add support for stage 1 access fault
25
* hw/arm/stellaris: QOM cleanups
26
* Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs
27
* Improve Cortex_R52 IMPDEF sysreg modelling
28
* Allow access to SPSR_hyp from hyp mode
29
* New board model mps3-an536 (Cortex-R52)
24
30
25
----------------------------------------------------------------
31
----------------------------------------------------------------
26
Alexander Graf (4):
32
Luc Michel (1):
27
target-arm: Declare virtio-mmio as dma-coherent in dt
33
hw/arm/smmuv3: add support for stage 1 access fault
28
hw/arm/virt: Declare virtio-mmio as dma cache coherent in ACPI
29
hw/arm/virt: Declare fwcfg as dma cache coherent in ACPI
30
hw/arm/virt: Declare fwcfg as dma cache coherent in dt
31
34
32
Cédric Le Goater (4):
35
Nabih Estefan (1):
33
aspeed: check for negative values returned by blk_getlength()
36
tests/qtest: Fix GMAC test to run on a machine in upstream QEMU
34
aspeed: remove useless comment on controller segment size
35
aspeed/smc: handle dummies only in fast read mode
36
aspeed/smc: use a modulo to check segment limits
37
37
38
Wei Huang (4):
38
Peter Maydell (22):
39
target-arm: Add support for PMU register PMSELR_EL0
39
hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses
40
target-arm: Add support for AArch64 PMU register PMXEVTYPER_EL0
40
hw/block/tc58128: Don't emit deprecation warning under qtest
41
target-arm: Add support for PMU register PMINTENSET_EL1
41
tests/qtest/meson.build: Don't include qtests_npcm7xx in qtests_aarch64
42
target-arm: Enable vPMU support under TCG mode
42
tests/qtest/bios-tables-test: Allow changes to virt GTDT
43
hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ
44
tests/qtest/bios-tables-tests: Update virt golden reference
45
hw/arm/npcm7xx: Call qemu_configure_nic_device() for GMAC modules
46
tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend
47
target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU
48
target/arm: Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs
49
target/arm: The Cortex-R52 has a read-only CBAR
50
target/arm: Add Cortex-R52 IMPDEF sysregs
51
target/arm: Allow access to SPSR_hyp from hyp mode
52
hw/misc/mps2-scc: Fix condition for CFG3 register
53
hw/misc/mps2-scc: Factor out which-board conditionals
54
hw/misc/mps2-scc: Make changes needed for AN536 FPGA image
55
hw/arm/mps3r: Initial skeleton for mps3-an536 board
56
hw/arm/mps3r: Add CPUs, GIC, and per-CPU RAM
57
hw/arm/mps3r: Add UARTs
58
hw/arm/mps3r: Add GPIO, watchdog, dual-timer, I2C devices
59
hw/arm/mps3r: Add remaining devices
60
docs: Add documentation for the mps3-an536 board
43
61
44
target/arm/cpu.h | 4 +--
62
Philippe Mathieu-Daudé (5):
45
hw/arm/aspeed.c | 22 +++++++++-----
63
hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC
46
hw/arm/vexpress.c | 1 +
64
hw/arm/stellaris: Convert ADC controller to Resettable interface
47
hw/arm/virt-acpi-build.c | 2 ++
65
hw/arm/stellaris: Convert I2C controller to Resettable interface
48
hw/arm/virt.c | 4 ++-
66
hw/arm/stellaris: Add missing QOM 'machine' parent
49
hw/ssi/aspeed_smc.c | 13 +++++----
67
hw/arm/stellaris: Add missing QOM 'SoC' parent
50
target/arm/cpu.c | 2 +-
51
target/arm/helper.c | 74 ++++++++++++++++++++++++++++++++++++------------
52
8 files changed, 88 insertions(+), 34 deletions(-)
53
68
69
Richard Henderson (6):
70
linux-user/aarch64: Choose SYNC as the preferred MTE mode
71
target/arm: Fix nregs computation in do_{ld,st}_zpa
72
target/arm: Adjust and validate mtedesc sizem1
73
target/arm: Split out make_svemte_desc
74
target/arm: Handle mte in do_ldrq, do_ldro
75
target/arm: Fix SVE/SME gross MTE suppression checks
76
77
MAINTAINERS | 3 +-
78
docs/system/arm/mps2.rst | 37 +-
79
configs/devices/arm-softmmu/default.mak | 1 +
80
hw/arm/smmuv3-internal.h | 1 +
81
include/hw/arm/smmu-common.h | 1 +
82
include/hw/arm/virt.h | 2 +
83
include/hw/misc/mps2-scc.h | 1 +
84
linux-user/aarch64/target_prctl.h | 29 +-
85
target/arm/internals.h | 2 +-
86
target/arm/tcg/translate-a64.h | 2 +
87
hw/arm/mps3r.c | 640 ++++++++++++++++++++++++++++++++
88
hw/arm/npcm7xx.c | 1 +
89
hw/arm/smmu-common.c | 11 +
90
hw/arm/smmuv3.c | 1 +
91
hw/arm/stellaris.c | 47 ++-
92
hw/arm/virt-acpi-build.c | 20 +-
93
hw/arm/virt.c | 60 ++-
94
hw/arm/xilinx_zynq.c | 2 +
95
hw/block/tc58128.c | 4 +-
96
hw/misc/mps2-scc.c | 138 ++++++-
97
hw/pci-host/raven.c | 1 +
98
target/arm/helper.c | 14 +-
99
target/arm/tcg/cpu32.c | 109 ++++++
100
target/arm/tcg/op_helper.c | 43 ++-
101
target/arm/tcg/sme_helper.c | 8 +-
102
target/arm/tcg/sve_helper.c | 12 +-
103
target/arm/tcg/translate-sme.c | 15 +-
104
target/arm/tcg/translate-sve.c | 83 +++--
105
target/arm/tcg/translate.c | 19 +-
106
tests/qtest/npcm7xx_emc-test.c | 5 +-
107
tests/qtest/npcm_gmac-test.c | 84 +----
108
hw/arm/Kconfig | 5 +
109
hw/arm/meson.build | 1 +
110
tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes
111
tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes
112
tests/qtest/meson.build | 4 +-
113
36 files changed, 1184 insertions(+), 222 deletions(-)
114
create mode 100644 hw/arm/mps3r.c
115
diff view generated by jsdifflib
[Qemu-devel] [PULL 09/12] aspeed: check for negative values returned by blk_getlength()
[PULL 01/35] hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC
1
From: Cédric Le Goater <clg@kaod.org>
1
From: Philippe Mathieu-Daudé <philmd@linaro.org>
2
2
3
write_boot_rom() does not check for negative values. This is more a
3
Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards,
4
problem for coverity than the actual code as the size of the flash
4
connect FIQ output of the GIC CPU interfaces to the CPU.
5
device is checked when the m25p80 object is created. If there is
6
anything wrong with the backing file, we should not even reach that
7
path.
8
5
9
Signed-off-by: Cédric Le Goater <clg@kaod.org>
6
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
10
Message-id: 1486648058-520-2-git-send-email-clg@kaod.org
7
Message-id: 20240130152548.17855-1-philmd@linaro.org
11
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
8
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
12
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
9
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
13
---
10
---
14
hw/arm/aspeed.c | 14 ++++++++++++--
11
hw/arm/xilinx_zynq.c | 2 ++
15
1 file changed, 12 insertions(+), 2 deletions(-)
12
1 file changed, 2 insertions(+)
16
13
17
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
14
diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
18
index XXXXXXX..XXXXXXX 100644
15
index XXXXXXX..XXXXXXX 100644
19
--- a/hw/arm/aspeed.c
16
--- a/hw/arm/xilinx_zynq.c
20
+++ b/hw/arm/aspeed.c
17
+++ b/hw/arm/xilinx_zynq.c
21
@@ -XXX,XX +XXX,XX @@ static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size,
18
@@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine)
22
{
19
sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
23
BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
20
sysbus_connect_irq(busdev, 0,
24
uint8_t *storage;
21
qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ));
25
+ int64_t size;
22
+ sysbus_connect_irq(busdev, 1,
26
23
+ qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ));
27
- if (rom_size > blk_getlength(blk)) {
24
28
- rom_size = blk_getlength(blk);
25
for (n = 0; n < 64; n++) {
29
+ /* The block backend size should have already been 'validated' by
26
pic[n] = qdev_get_gpio_in(dev, n);
30
+ * the creation of the m25p80 object.
31
+ */
32
+ size = blk_getlength(blk);
33
+ if (size <= 0) {
34
+ error_setg(errp, "failed to get flash size");
35
+ return;
36
+ }
37
+
38
+ if (rom_size > size) {
39
+ rom_size = size;
40
}
41
42
storage = g_new0(uint8_t, rom_size);
43
--
27
--
44
2.7.4
28
2.34.1
45
29
46
30
diff view generated by jsdifflib
New patch
[PULL 02/35] linux-user/aarch64: Choose SYNC as the preferred MTE mode
1
From: Richard Henderson <richard.henderson@linaro.org>
1
2
3
The API does not generate an error for setting ASYNC | SYNC; that merely
4
constrains the selection vs the per-cpu default. For qemu linux-user,
5
choose SYNC as the default.
6
7
Cc: qemu-stable@nongnu.org
8
Reported-by: Gustavo Romero <gustavo.romero@linaro.org>
9
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
10
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
11
Message-id: 20240207025210.8837-2-richard.henderson@linaro.org
12
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
13
---
14
linux-user/aarch64/target_prctl.h | 29 +++++++++++++++++------------
15
1 file changed, 17 insertions(+), 12 deletions(-)
16
17
diff --git a/linux-user/aarch64/target_prctl.h b/linux-user/aarch64/target_prctl.h
18
index XXXXXXX..XXXXXXX 100644
19
--- a/linux-user/aarch64/target_prctl.h
20
+++ b/linux-user/aarch64/target_prctl.h
21
@@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_set_tagged_addr_ctrl(CPUArchState *env, abi_long arg2)
22
env->tagged_addr_enable = arg2 & PR_TAGGED_ADDR_ENABLE;
23
24
if (cpu_isar_feature(aa64_mte, cpu)) {
25
- switch (arg2 & PR_MTE_TCF_MASK) {
26
- case PR_MTE_TCF_NONE:
27
- case PR_MTE_TCF_SYNC:
28
- case PR_MTE_TCF_ASYNC:
29
- break;
30
- default:
31
- return -EINVAL;
32
- }
33
-
34
/*
35
* Write PR_MTE_TCF to SCTLR_EL1[TCF0].
36
- * Note that the syscall values are consistent with hw.
37
+ *
38
+ * The kernel has a per-cpu configuration for the sysadmin,
39
+ * /sys/devices/system/cpu/cpu<N>/mte_tcf_preferred,
40
+ * which qemu does not implement.
41
+ *
42
+ * Because there is no performance difference between the modes, and
43
+ * because SYNC is most useful for debugging MTE errors, choose SYNC
44
+ * as the preferred mode. With this preference, and the way the API
45
+ * uses only two bits, there is no way for the program to select
46
+ * ASYMM mode.
47
*/
48
- env->cp15.sctlr_el[1] =
49
- deposit64(env->cp15.sctlr_el[1], 38, 2, arg2 >> PR_MTE_TCF_SHIFT);
50
+ unsigned tcf = 0;
51
+ if (arg2 & PR_MTE_TCF_SYNC) {
52
+ tcf = 1;
53
+ } else if (arg2 & PR_MTE_TCF_ASYNC) {
54
+ tcf = 2;
55
+ }
56
+ env->cp15.sctlr_el[1] = deposit64(env->cp15.sctlr_el[1], 38, 2, tcf);
57
58
/*
59
* Write PR_MTE_TAG to GCR_EL1[Exclude].
60
--
61
2.34.1
diff view generated by jsdifflib
New patch
[PULL 03/35] target/arm: Fix nregs computation in do_{ld,st}_zpa
1
From: Richard Henderson <richard.henderson@linaro.org>
1
2
3
The field is encoded as [0-3], which is convenient for
4
indexing our array of function pointers, but the true
5
value is [1-4]. Adjust before calling do_mem_zpa.
6
7
Add an assert, and move the comment re passing ZT to
8
the helper back next to the relevant code.
9
10
Cc: qemu-stable@nongnu.org
11
Fixes: 206adacfb8d ("target/arm: Add mte helpers for sve scalar + int loads")
12
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
13
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
14
Message-id: 20240207025210.8837-3-richard.henderson@linaro.org
15
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
16
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
17
---
18
target/arm/tcg/translate-sve.c | 16 ++++++++--------
19
1 file changed, 8 insertions(+), 8 deletions(-)
20
21
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
22
index XXXXXXX..XXXXXXX 100644
23
--- a/target/arm/tcg/translate-sve.c
24
+++ b/target/arm/tcg/translate-sve.c
25
@@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr,
26
TCGv_ptr t_pg;
27
int desc = 0;
28
29
- /*
30
- * For e.g. LD4, there are not enough arguments to pass all 4
31
- * registers as pointers, so encode the regno into the data field.
32
- * For consistency, do this even for LD1.
33
- */
34
+ assert(mte_n >= 1 && mte_n <= 4);
35
if (s->mte_active[0]) {
36
int msz = dtype_msz(dtype);
37
38
@@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr,
39
addr = clean_data_tbi(s, addr);
40
}
41
42
+ /*
43
+ * For e.g. LD4, there are not enough arguments to pass all 4
44
+ * registers as pointers, so encode the regno into the data field.
45
+ * For consistency, do this even for LD1.
46
+ */
47
desc = simd_desc(vsz, vsz, zt | desc);
48
t_pg = tcg_temp_new_ptr();
49
50
@@ -XXX,XX +XXX,XX @@ static void do_ld_zpa(DisasContext *s, int zt, int pg,
51
* accessible via the instruction encoding.
52
*/
53
assert(fn != NULL);
54
- do_mem_zpa(s, zt, pg, addr, dtype, nreg, false, fn);
55
+ do_mem_zpa(s, zt, pg, addr, dtype, nreg + 1, false, fn);
56
}
57
58
static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a)
59
@@ -XXX,XX +XXX,XX @@ static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr,
60
if (nreg == 0) {
61
/* ST1 */
62
fn = fn_single[s->mte_active[0]][be][msz][esz];
63
- nreg = 1;
64
} else {
65
/* ST2, ST3, ST4 -- msz == esz, enforced by encoding */
66
assert(msz == esz);
67
fn = fn_multiple[s->mte_active[0]][be][nreg - 1][msz];
68
}
69
assert(fn != NULL);
70
- do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg, true, fn);
71
+ do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg + 1, true, fn);
72
}
73
74
static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a)
75
--
76
2.34.1
diff view generated by jsdifflib
New patch
[PULL 04/35] target/arm: Adjust and validate mtedesc sizem1
1
From: Richard Henderson <richard.henderson@linaro.org>
1
2
3
When we added SVE_MTEDESC_SHIFT, we effectively limited the
4
maximum size of MTEDESC. Adjust SIZEM1 to consume the remaining
5
bits (32 - 10 - 5 - 12 == 5). Assert that the data to be stored
6
fits within the field (expecting 8 * 4 - 1 == 31, exact fit).
7
8
Cc: qemu-stable@nongnu.org
9
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
10
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
11
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
12
Message-id: 20240207025210.8837-4-richard.henderson@linaro.org
13
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
14
---
15
target/arm/internals.h | 2 +-
16
target/arm/tcg/translate-sve.c | 7 ++++---
17
2 files changed, 5 insertions(+), 4 deletions(-)
18
19
diff --git a/target/arm/internals.h b/target/arm/internals.h
20
index XXXXXXX..XXXXXXX 100644
21
--- a/target/arm/internals.h
22
+++ b/target/arm/internals.h
23
@@ -XXX,XX +XXX,XX @@ FIELD(MTEDESC, TBI, 4, 2)
24
FIELD(MTEDESC, TCMA, 6, 2)
25
FIELD(MTEDESC, WRITE, 8, 1)
26
FIELD(MTEDESC, ALIGN, 9, 3)
27
-FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - 12) /* size - 1 */
28
+FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - SVE_MTEDESC_SHIFT - 12) /* size - 1 */
29
30
bool mte_probe(CPUARMState *env, uint32_t desc, uint64_t ptr);
31
uint64_t mte_check(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra);
32
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
33
index XXXXXXX..XXXXXXX 100644
34
--- a/target/arm/tcg/translate-sve.c
35
+++ b/target/arm/tcg/translate-sve.c
36
@@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr,
37
{
38
unsigned vsz = vec_full_reg_size(s);
39
TCGv_ptr t_pg;
40
+ uint32_t sizem1;
41
int desc = 0;
42
43
assert(mte_n >= 1 && mte_n <= 4);
44
+ sizem1 = (mte_n << dtype_msz(dtype)) - 1;
45
+ assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT);
46
if (s->mte_active[0]) {
47
- int msz = dtype_msz(dtype);
48
-
49
desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s));
50
desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid);
51
desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma);
52
desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write);
53
- desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (mte_n << msz) - 1);
54
+ desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1);
55
desc <<= SVE_MTEDESC_SHIFT;
56
} else {
57
addr = clean_data_tbi(s, addr);
58
--
59
2.34.1
diff view generated by jsdifflib
New patch
[PULL 05/35] target/arm: Split out make_svemte_desc
1
From: Richard Henderson <richard.henderson@linaro.org>
1
2
3
Share code that creates mtedesc and embeds within simd_desc.
4
5
Cc: qemu-stable@nongnu.org
6
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
7
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
8
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
9
Message-id: 20240207025210.8837-5-richard.henderson@linaro.org
10
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
11
---
12
target/arm/tcg/translate-a64.h | 2 ++
13
target/arm/tcg/translate-sme.c | 15 +++--------
14
target/arm/tcg/translate-sve.c | 47 ++++++++++++++++++----------------
15
3 files changed, 31 insertions(+), 33 deletions(-)
16
17
diff --git a/target/arm/tcg/translate-a64.h b/target/arm/tcg/translate-a64.h
18
index XXXXXXX..XXXXXXX 100644
19
--- a/target/arm/tcg/translate-a64.h
20
+++ b/target/arm/tcg/translate-a64.h
21
@@ -XXX,XX +XXX,XX @@ bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn,
22
bool sve_access_check(DisasContext *s);
23
bool sme_enabled_check(DisasContext *s);
24
bool sme_enabled_check_with_svcr(DisasContext *s, unsigned);
25
+uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs,
26
+ uint32_t msz, bool is_write, uint32_t data);
27
28
/* This function corresponds to CheckStreamingSVEEnabled. */
29
static inline bool sme_sm_enabled_check(DisasContext *s)
30
diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c
31
index XXXXXXX..XXXXXXX 100644
32
--- a/target/arm/tcg/translate-sme.c
33
+++ b/target/arm/tcg/translate-sme.c
34
@@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a)
35
36
TCGv_ptr t_za, t_pg;
37
TCGv_i64 addr;
38
- int svl, desc = 0;
39
+ uint32_t desc;
40
bool be = s->be_data == MO_BE;
41
bool mte = s->mte_active[0];
42
43
@@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a)
44
tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->esz);
45
tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn));
46
47
- if (mte) {
48
- desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s));
49
- desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid);
50
- desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma);
51
- desc = FIELD_DP32(desc, MTEDESC, WRITE, a->st);
52
- desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << a->esz) - 1);
53
- desc <<= SVE_MTEDESC_SHIFT;
54
- } else {
55
+ if (!mte) {
56
addr = clean_data_tbi(s, addr);
57
}
58
- svl = streaming_vec_reg_size(s);
59
- desc = simd_desc(svl, svl, desc);
60
+
61
+ desc = make_svemte_desc(s, streaming_vec_reg_size(s), 1, a->esz, a->st, 0);
62
63
fns[a->esz][be][a->v][mte][a->st](tcg_env, t_za, t_pg, addr,
64
tcg_constant_i32(desc));
65
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
66
index XXXXXXX..XXXXXXX 100644
67
--- a/target/arm/tcg/translate-sve.c
68
+++ b/target/arm/tcg/translate-sve.c
69
@@ -XXX,XX +XXX,XX @@ static const uint8_t dtype_esz[16] = {
70
3, 2, 1, 3
71
};
72
73
-static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr,
74
- int dtype, uint32_t mte_n, bool is_write,
75
- gen_helper_gvec_mem *fn)
76
+uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs,
77
+ uint32_t msz, bool is_write, uint32_t data)
78
{
79
- unsigned vsz = vec_full_reg_size(s);
80
- TCGv_ptr t_pg;
81
uint32_t sizem1;
82
- int desc = 0;
83
+ uint32_t desc = 0;
84
85
- assert(mte_n >= 1 && mte_n <= 4);
86
- sizem1 = (mte_n << dtype_msz(dtype)) - 1;
87
+ /* Assert all of the data fits, with or without MTE enabled. */
88
+ assert(nregs >= 1 && nregs <= 4);
89
+ sizem1 = (nregs << msz) - 1;
90
assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT);
91
+ assert(data < 1u << SVE_MTEDESC_SHIFT);
92
+
93
if (s->mte_active[0]) {
94
desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s));
95
desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid);
96
@@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr,
97
desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write);
98
desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1);
99
desc <<= SVE_MTEDESC_SHIFT;
100
- } else {
101
+ }
102
+ return simd_desc(vsz, vsz, desc | data);
103
+}
104
+
105
+static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr,
106
+ int dtype, uint32_t nregs, bool is_write,
107
+ gen_helper_gvec_mem *fn)
108
+{
109
+ TCGv_ptr t_pg;
110
+ uint32_t desc;
111
+
112
+ if (!s->mte_active[0]) {
113
addr = clean_data_tbi(s, addr);
114
}
115
116
@@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr,
117
* registers as pointers, so encode the regno into the data field.
118
* For consistency, do this even for LD1.
119
*/
120
- desc = simd_desc(vsz, vsz, zt | desc);
121
+ desc = make_svemte_desc(s, vec_full_reg_size(s), nregs,
122
+ dtype_msz(dtype), is_write, zt);
123
t_pg = tcg_temp_new_ptr();
124
125
tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg));
126
@@ -XXX,XX +XXX,XX @@ static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm,
127
int scale, TCGv_i64 scalar, int msz, bool is_write,
128
gen_helper_gvec_mem_scatter *fn)
129
{
130
- unsigned vsz = vec_full_reg_size(s);
131
TCGv_ptr t_zm = tcg_temp_new_ptr();
132
TCGv_ptr t_pg = tcg_temp_new_ptr();
133
TCGv_ptr t_zt = tcg_temp_new_ptr();
134
- int desc = 0;
135
-
136
- if (s->mte_active[0]) {
137
- desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s));
138
- desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid);
139
- desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma);
140
- desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write);
141
- desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << msz) - 1);
142
- desc <<= SVE_MTEDESC_SHIFT;
143
- }
144
- desc = simd_desc(vsz, vsz, desc | scale);
145
+ uint32_t desc;
146
147
tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg));
148
tcg_gen_addi_ptr(t_zm, tcg_env, vec_full_reg_offset(s, zm));
149
tcg_gen_addi_ptr(t_zt, tcg_env, vec_full_reg_offset(s, zt));
150
+
151
+ desc = make_svemte_desc(s, vec_full_reg_size(s), 1, msz, is_write, scale);
152
fn(tcg_env, t_zt, t_pg, t_zm, scalar, tcg_constant_i32(desc));
153
}
154
155
--
156
2.34.1
diff view generated by jsdifflib
New patch
[PULL 06/35] target/arm: Handle mte in do_ldrq, do_ldro
1
From: Richard Henderson <richard.henderson@linaro.org>
1
2
3
These functions "use the standard load helpers", but
4
fail to clean_data_tbi or populate mtedesc.
5
6
Cc: qemu-stable@nongnu.org
7
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
8
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
9
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
10
Message-id: 20240207025210.8837-6-richard.henderson@linaro.org
11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
12
---
13
target/arm/tcg/translate-sve.c | 15 +++++++++++++--
14
1 file changed, 13 insertions(+), 2 deletions(-)
15
16
diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c
17
index XXXXXXX..XXXXXXX 100644
18
--- a/target/arm/tcg/translate-sve.c
19
+++ b/target/arm/tcg/translate-sve.c
20
@@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype)
21
unsigned vsz = vec_full_reg_size(s);
22
TCGv_ptr t_pg;
23
int poff;
24
+ uint32_t desc;
25
26
/* Load the first quadword using the normal predicated load helpers. */
27
+ if (!s->mte_active[0]) {
28
+ addr = clean_data_tbi(s, addr);
29
+ }
30
+
31
poff = pred_full_reg_offset(s, pg);
32
if (vsz > 16) {
33
/*
34
@@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype)
35
36
gen_helper_gvec_mem *fn
37
= ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0];
38
- fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(16, 16, zt)));
39
+ desc = make_svemte_desc(s, 16, 1, dtype_msz(dtype), false, zt);
40
+ fn(tcg_env, t_pg, addr, tcg_constant_i32(desc));
41
42
/* Replicate that first quadword. */
43
if (vsz > 16) {
44
@@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype)
45
unsigned vsz_r32;
46
TCGv_ptr t_pg;
47
int poff, doff;
48
+ uint32_t desc;
49
50
if (vsz < 32) {
51
/*
52
@@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype)
53
}
54
55
/* Load the first octaword using the normal predicated load helpers. */
56
+ if (!s->mte_active[0]) {
57
+ addr = clean_data_tbi(s, addr);
58
+ }
59
60
poff = pred_full_reg_offset(s, pg);
61
if (vsz > 32) {
62
@@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype)
63
64
gen_helper_gvec_mem *fn
65
= ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0];
66
- fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(32, 32, zt)));
67
+ desc = make_svemte_desc(s, 32, 1, dtype_msz(dtype), false, zt);
68
+ fn(tcg_env, t_pg, addr, tcg_constant_i32(desc));
69
70
/*
71
* Replicate that first octaword.
72
--
73
2.34.1
diff view generated by jsdifflib
New patch
[PULL 07/35] target/arm: Fix SVE/SME gross MTE suppression checks
1
From: Richard Henderson <richard.henderson@linaro.org>
1
2
3
The TBI and TCMA bits are located within mtedesc, not desc.
4
5
Cc: qemu-stable@nongnu.org
6
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
7
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
8
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
9
Message-id: 20240207025210.8837-7-richard.henderson@linaro.org
10
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
11
---
12
target/arm/tcg/sme_helper.c | 8 ++++----
13
target/arm/tcg/sve_helper.c | 12 ++++++------
14
2 files changed, 10 insertions(+), 10 deletions(-)
15
16
diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c
17
index XXXXXXX..XXXXXXX 100644
18
--- a/target/arm/tcg/sme_helper.c
19
+++ b/target/arm/tcg/sme_helper.c
20
@@ -XXX,XX +XXX,XX @@ void sme_ld1_mte(CPUARMState *env, void *za, uint64_t *vg,
21
desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT);
22
23
/* Perform gross MTE suppression early. */
24
- if (!tbi_check(desc, bit55) ||
25
- tcma_check(desc, bit55, allocation_tag_from_addr(addr))) {
26
+ if (!tbi_check(mtedesc, bit55) ||
27
+ tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) {
28
mtedesc = 0;
29
}
30
31
@@ -XXX,XX +XXX,XX @@ void sme_st1_mte(CPUARMState *env, void *za, uint64_t *vg, target_ulong addr,
32
desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT);
33
34
/* Perform gross MTE suppression early. */
35
- if (!tbi_check(desc, bit55) ||
36
- tcma_check(desc, bit55, allocation_tag_from_addr(addr))) {
37
+ if (!tbi_check(mtedesc, bit55) ||
38
+ tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) {
39
mtedesc = 0;
40
}
41
42
diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
43
index XXXXXXX..XXXXXXX 100644
44
--- a/target/arm/tcg/sve_helper.c
45
+++ b/target/arm/tcg/sve_helper.c
46
@@ -XXX,XX +XXX,XX @@ void sve_ldN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr,
47
desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT);
48
49
/* Perform gross MTE suppression early. */
50
- if (!tbi_check(desc, bit55) ||
51
- tcma_check(desc, bit55, allocation_tag_from_addr(addr))) {
52
+ if (!tbi_check(mtedesc, bit55) ||
53
+ tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) {
54
mtedesc = 0;
55
}
56
57
@@ -XXX,XX +XXX,XX @@ void sve_ldnfff1_r_mte(CPUARMState *env, void *vg, target_ulong addr,
58
desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT);
59
60
/* Perform gross MTE suppression early. */
61
- if (!tbi_check(desc, bit55) ||
62
- tcma_check(desc, bit55, allocation_tag_from_addr(addr))) {
63
+ if (!tbi_check(mtedesc, bit55) ||
64
+ tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) {
65
mtedesc = 0;
66
}
67
68
@@ -XXX,XX +XXX,XX @@ void sve_stN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr,
69
desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT);
70
71
/* Perform gross MTE suppression early. */
72
- if (!tbi_check(desc, bit55) ||
73
- tcma_check(desc, bit55, allocation_tag_from_addr(addr))) {
74
+ if (!tbi_check(mtedesc, bit55) ||
75
+ tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) {
76
mtedesc = 0;
77
}
78
79
--
80
2.34.1
diff view generated by jsdifflib
[Qemu-devel] [PULL 08/12] hw/arm/virt: Declare fwcfg as dma cache coherent in dt
[PULL 08/35] hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses
1
From: Alexander Graf <agraf@suse.de>
1
The raven_io_ops MemoryRegionOps is the only one in the source tree
2
which sets .valid.unaligned to indicate that it should support
3
unaligned accesses and which does not also set .impl.unaligned to
4
indicate that its read and write functions can do the unaligned
5
handling themselves. This is a problem, because at the moment the
6
core memory system does not implement the support for handling
7
unaligned accesses by doing a series of aligned accesses and
8
combining them (system/memory.c:access_with_adjusted_size() has a
9
TODO comment noting this).
2
10
3
Fw-cfg recently learned how to directly access guest memory and does so in
11
Fortunately raven_io_read() and raven_io_write() will correctly deal
4
cache coherent fashion. Tell the guest about that fact when it's using DT.
12
with the case of being passed an unaligned address, so we can fix the
13
missing unaligned access support by setting .impl.unaligned in the
14
MemoryRegionOps struct.
5
15
6
Signed-off-by: Alexander Graf <agraf@suse.de>
16
Fixes: 9a1839164c9c8f06 ("raven: Implement non-contiguous I/O region")
7
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
8
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
9
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
10
Message-id: 1486644810-33181-5-git-send-email-agraf@suse.de
11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
17
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
18
Tested-by: Cédric Le Goater <clg@redhat.com>
19
Reviewed-by: Cédric Le Goater <clg@redhat.com>
20
Message-id: 20240112134640.1775041-1-peter.maydell@linaro.org
12
---
21
---
13
hw/arm/virt.c | 1 +
22
hw/pci-host/raven.c | 1 +
14
1 file changed, 1 insertion(+)
23
1 file changed, 1 insertion(+)
15
24
16
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
25
diff --git a/hw/pci-host/raven.c b/hw/pci-host/raven.c
17
index XXXXXXX..XXXXXXX 100644
26
index XXXXXXX..XXXXXXX 100644
18
--- a/hw/arm/virt.c
27
--- a/hw/pci-host/raven.c
19
+++ b/hw/arm/virt.c
28
+++ b/hw/pci-host/raven.c
20
@@ -XXX,XX +XXX,XX @@ static FWCfgState *create_fw_cfg(const VirtMachineState *vms, AddressSpace *as)
29
@@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps raven_io_ops = {
21
"compatible", "qemu,fw-cfg-mmio");
30
.write = raven_io_write,
22
qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
31
.endianness = DEVICE_LITTLE_ENDIAN,
23
2, base, 2, size);
32
.impl.max_access_size = 4,
24
+ qemu_fdt_setprop(vms->fdt, nodename, "dma-coherent", NULL, 0);
33
+ .impl.unaligned = true,
25
g_free(nodename);
34
.valid.unaligned = true,
26
return fw_cfg;
35
};
27
}
36
28
--
37
--
29
2.7.4
38
2.34.1
30
39
31
40
diff view generated by jsdifflib
New patch
[PULL 09/35] hw/block/tc58128: Don't emit deprecation warning under qtest
1
Suppress the deprecation warning when we're running under qtest,
2
to avoid "make check" including warning messages in its output.
1
3
4
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
6
Message-id: 20240206154151.155620-1-peter.maydell@linaro.org
7
---
8
hw/block/tc58128.c | 4 +++-
9
1 file changed, 3 insertions(+), 1 deletion(-)
10
11
diff --git a/hw/block/tc58128.c b/hw/block/tc58128.c
12
index XXXXXXX..XXXXXXX 100644
13
--- a/hw/block/tc58128.c
14
+++ b/hw/block/tc58128.c
15
@@ -XXX,XX +XXX,XX @@ static sh7750_io_device tc58128 = {
16
17
int tc58128_init(struct SH7750State *s, const char *zone1, const char *zone2)
18
{
19
- warn_report_once("The TC58128 flash device is deprecated");
20
+ if (!qtest_enabled()) {
21
+ warn_report_once("The TC58128 flash device is deprecated");
22
+ }
23
init_dev(&tc58128_devs[0], zone1);
24
init_dev(&tc58128_devs[1], zone2);
25
return sh7750_register_io_device(s, &tc58128);
26
--
27
2.34.1
28
29
diff view generated by jsdifflib
New patch
[PULL 10/35] tests/qtest/meson.build: Don't include qtests_npcm7xx in qtests_aarch64
1
We deliberately don't include qtests_npcm7xx in qtests_aarch64,
2
because we already get the coverage of those tests via qtests_arm,
3
and we don't want to use extra CI minutes testing them twice.
1
4
5
In commit 327b680877b79c4b we added it to qtests_aarch64; revert
6
that change.
7
8
Fixes: 327b680877b79c4b ("tests/qtest: Creating qtest for GMAC Module")
9
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
10
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
11
Message-id: 20240206163043.315535-1-peter.maydell@linaro.org
12
---
13
tests/qtest/meson.build | 1 -
14
1 file changed, 1 deletion(-)
15
16
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
17
index XXXXXXX..XXXXXXX 100644
18
--- a/tests/qtest/meson.build
19
+++ b/tests/qtest/meson.build
20
@@ -XXX,XX +XXX,XX @@ qtests_aarch64 = \
21
(config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \
22
(config_all_accel.has_key('CONFIG_TCG') and \
23
config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \
24
- (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \
25
['arm-cpu-features',
26
'numa-test',
27
'boot-serial-test',
28
--
29
2.34.1
30
31
diff view generated by jsdifflib
New patch
[PULL 11/35] tests/qtest/bios-tables-test: Allow changes to virt GTDT
1
Allow changes to the virt GTDT -- we are going to add the IRQ
2
entry for a new timer to it.
1
3
4
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
6
Message-id: 20240122143537.233498-2-peter.maydell@linaro.org
7
---
8
tests/qtest/bios-tables-test-allowed-diff.h | 2 ++
9
1 file changed, 2 insertions(+)
10
11
diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
12
index XXXXXXX..XXXXXXX 100644
13
--- a/tests/qtest/bios-tables-test-allowed-diff.h
14
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
15
@@ -1 +1,3 @@
16
/* List of comma-separated changed AML files to ignore */
17
+"tests/data/acpi/virt/FACP",
18
+"tests/data/acpi/virt/GTDT",
19
--
20
2.34.1
diff view generated by jsdifflib
[Qemu-devel] [PULL 07/12] hw/arm/virt: Declare fwcfg as dma cache coherent in ACPI
[PULL 12/35] hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ
1
From: Alexander Graf <agraf@suse.de>
1
Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a
2
2
non-secure EL2 virtual timer. We implemented the timer itself in the
3
Fw-cfg recently learned how to directly access guest memory and does so in
3
CPU model, but never wired up its IRQ line to the GIC.
4
cache coherent fashion. Tell the guest about that fact when it's using ACPI.
4
5
5
Wire up the IRQ line (this is always safe whether the CPU has the
6
Signed-off-by: Alexander Graf <agraf@suse.de>
6
interrupt or not, since it always creates the outbound IRQ line).
7
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
7
Report it to the guest via dtb and ACPI if the CPU has the feature.
8
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
8
9
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
9
The DTB binding is documented in the kernel's
10
Message-id: 1486644810-33181-4-git-send-email-agraf@suse.de
10
Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml
11
and the ACPI table entries are documented in the ACPI specification
12
version 6.3 or later.
13
14
Because the IRQ line ACPI binding is new in 6.3, we need to bump the
15
FADT table rev to show that we might be using 6.3 features.
16
17
Note that exposing this IRQ in the DTB will trigger a bug in EDK2
18
versions prior to edk2-stable202311, for users who use the virt board
19
with 'virtualization=on' to enable EL2 emulation and are booting an
20
EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is
21
that EDK2 will assert on bootup:
22
23
ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48
24
25
If you see that assertion you should do one of:
26
* update your EDK2 binaries to edk2-stable202311 or newer
27
* use the 'virt-8.2' versioned machine type
28
* not use 'virtualization=on'
29
30
(The versions shipped with QEMU itself have the fix.)
31
11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
33
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
34
Message-id: 20240122143537.233498-3-peter.maydell@linaro.org
12
---
35
---
13
hw/arm/virt-acpi-build.c | 1 +
36
include/hw/arm/virt.h | 2 ++
14
1 file changed, 1 insertion(+)
37
hw/arm/virt-acpi-build.c | 20 ++++++++++----
15
38
hw/arm/virt.c | 60 ++++++++++++++++++++++++++++++++++------
39
3 files changed, 67 insertions(+), 15 deletions(-)
40
41
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
42
index XXXXXXX..XXXXXXX 100644
43
--- a/include/hw/arm/virt.h
44
+++ b/include/hw/arm/virt.h
45
@@ -XXX,XX +XXX,XX @@ struct VirtMachineClass {
46
/* Machines < 6.2 have no support for describing cpu topology to guest */
47
bool no_cpu_topology;
48
bool no_tcg_lpa2;
49
+ bool no_ns_el2_virt_timer_irq;
50
};
51
52
struct VirtMachineState {
53
@@ -XXX,XX +XXX,XX @@ struct VirtMachineState {
54
PCIBus *bus;
55
char *oem_id;
56
char *oem_table_id;
57
+ bool ns_el2_virt_timer_irq;
58
};
59
60
#define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)
16
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
61
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
17
index XXXXXXX..XXXXXXX 100644
62
index XXXXXXX..XXXXXXX 100644
18
--- a/hw/arm/virt-acpi-build.c
63
--- a/hw/arm/virt-acpi-build.c
19
+++ b/hw/arm/virt-acpi-build.c
64
+++ b/hw/arm/virt-acpi-build.c
20
@@ -XXX,XX +XXX,XX @@ static void acpi_dsdt_add_fw_cfg(Aml *scope, const MemMapEntry *fw_cfg_memmap)
65
@@ -XXX,XX +XXX,XX @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
21
aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002")));
66
}
22
/* device present, functioning, decoding, not shown in UI */
67
23
aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
68
/*
24
+ aml_append(dev, aml_name_decl("_CCA", aml_int(1)));
69
- * ACPI spec, Revision 5.1
25
70
- * 5.2.24 Generic Timer Description Table (GTDT)
26
Aml *crs = aml_resource_template();
71
+ * ACPI spec, Revision 6.5
27
aml_append(crs, aml_memory32_fixed(fw_cfg_memmap->base,
72
+ * 5.2.25 Generic Timer Description Table (GTDT)
73
*/
74
static void
75
build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
76
@@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
77
uint32_t irqflags = vmc->claim_edge_triggered_timers ?
78
1 : /* Interrupt is Edge triggered */
79
0; /* Interrupt is Level triggered */
80
- AcpiTable table = { .sig = "GTDT", .rev = 2, .oem_id = vms->oem_id,
81
+ AcpiTable table = { .sig = "GTDT", .rev = 3, .oem_id = vms->oem_id,
82
.oem_table_id = vms->oem_table_id };
83
84
acpi_table_begin(&table, table_data);
85
@@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
86
build_append_int_noprefix(table_data, 0, 4);
87
/* Platform Timer Offset */
88
build_append_int_noprefix(table_data, 0, 4);
89
-
90
+ if (vms->ns_el2_virt_timer_irq) {
91
+ /* Virtual EL2 Timer GSIV */
92
+ build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_VIRT_IRQ, 4);
93
+ /* Virtual EL2 Timer Flags */
94
+ build_append_int_noprefix(table_data, irqflags, 4);
95
+ } else {
96
+ build_append_int_noprefix(table_data, 0, 4);
97
+ build_append_int_noprefix(table_data, 0, 4);
98
+ }
99
acpi_table_end(linker, &table);
100
}
101
102
@@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
103
static void build_fadt_rev6(GArray *table_data, BIOSLinker *linker,
104
VirtMachineState *vms, unsigned dsdt_tbl_offset)
105
{
106
- /* ACPI v6.0 */
107
+ /* ACPI v6.3 */
108
AcpiFadtData fadt = {
109
.rev = 6,
110
- .minor_ver = 0,
111
+ .minor_ver = 3,
112
.flags = 1 << ACPI_FADT_F_HW_REDUCED_ACPI,
113
.xdsdt_tbl_offset = &dsdt_tbl_offset,
114
};
115
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
116
index XXXXXXX..XXXXXXX 100644
117
--- a/hw/arm/virt.c
118
+++ b/hw/arm/virt.c
119
@@ -XXX,XX +XXX,XX @@ static void create_randomness(MachineState *ms, const char *node)
120
qemu_fdt_setprop(ms->fdt, node, "rng-seed", seed.rng, sizeof(seed.rng));
121
}
122
123
+/*
124
+ * The CPU object always exposes the NS EL2 virt timer IRQ line,
125
+ * but we don't want to advertise it to the guest in the dtb or ACPI
126
+ * table unless it's really going to do something.
127
+ */
128
+static bool ns_el2_virt_timer_present(void)
129
+{
130
+ ARMCPU *cpu = ARM_CPU(qemu_get_cpu(0));
131
+ CPUARMState *env = &cpu->env;
132
+
133
+ return arm_feature(env, ARM_FEATURE_AARCH64) &&
134
+ arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu);
135
+}
136
+
137
static void create_fdt(VirtMachineState *vms)
138
{
139
MachineState *ms = MACHINE(vms);
140
@@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms)
141
"arm,armv7-timer");
142
}
143
qemu_fdt_setprop(ms->fdt, "/timer", "always-on", NULL, 0);
144
- qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts",
145
- GIC_FDT_IRQ_TYPE_PPI,
146
- INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags,
147
- GIC_FDT_IRQ_TYPE_PPI,
148
- INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags,
149
- GIC_FDT_IRQ_TYPE_PPI,
150
- INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags,
151
- GIC_FDT_IRQ_TYPE_PPI,
152
- INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags);
153
+ if (vms->ns_el2_virt_timer_irq) {
154
+ qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts",
155
+ GIC_FDT_IRQ_TYPE_PPI,
156
+ INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags,
157
+ GIC_FDT_IRQ_TYPE_PPI,
158
+ INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags,
159
+ GIC_FDT_IRQ_TYPE_PPI,
160
+ INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags,
161
+ GIC_FDT_IRQ_TYPE_PPI,
162
+ INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags,
163
+ GIC_FDT_IRQ_TYPE_PPI,
164
+ INTID_TO_PPI(ARCH_TIMER_NS_EL2_VIRT_IRQ), irqflags);
165
+ } else {
166
+ qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts",
167
+ GIC_FDT_IRQ_TYPE_PPI,
168
+ INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags,
169
+ GIC_FDT_IRQ_TYPE_PPI,
170
+ INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags,
171
+ GIC_FDT_IRQ_TYPE_PPI,
172
+ INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags,
173
+ GIC_FDT_IRQ_TYPE_PPI,
174
+ INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags);
175
+ }
176
}
177
178
static void fdt_add_cpu_nodes(const VirtMachineState *vms)
179
@@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem)
180
[GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
181
[GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ,
182
[GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ,
183
+ [GTIMER_HYPVIRT] = ARCH_TIMER_NS_EL2_VIRT_IRQ,
184
};
185
186
for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
187
@@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine)
188
qdev_realize(DEVICE(cpuobj), NULL, &error_fatal);
189
object_unref(cpuobj);
190
}
191
+
192
+ /* Now we've created the CPUs we can see if they have the hypvirt timer */
193
+ vms->ns_el2_virt_timer_irq = ns_el2_virt_timer_present() &&
194
+ !vmc->no_ns_el2_virt_timer_irq;
195
+
196
fdt_add_timer_nodes(vms);
197
fdt_add_cpu_nodes(vms);
198
199
@@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(9, 0)
200
201
static void virt_machine_8_2_options(MachineClass *mc)
202
{
203
+ VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));
204
+
205
virt_machine_9_0_options(mc);
206
compat_props_add(mc->compat_props, hw_compat_8_2, hw_compat_8_2_len);
207
+ /*
208
+ * Don't expose NS_EL2_VIRT timer IRQ in DTB on ACPI on 8.2 and
209
+ * earlier machines. (Exposing it tickles a bug in older EDK2
210
+ * guest BIOS binaries.)
211
+ */
212
+ vmc->no_ns_el2_virt_timer_irq = true;
213
}
214
DEFINE_VIRT_MACHINE(8, 2)
215
28
--
216
--
29
2.7.4
217
2.34.1
30
31
diff view generated by jsdifflib
New patch
[PULL 13/35] tests/qtest/bios-tables-tests: Update virt golden reference
1
1
Update the virt golden reference files to say that the FACP is ACPI
2
v6.3, and the GTDT table is a revision 3 table with space for the
3
virtual EL2 timer.
4
5
Diffs from iasl:
6
7
@@ -XXX,XX +XXX,XX @@
8
/*
9
* Intel ACPI Component Architecture
10
* AML/ASL+ Disassembler version 20200925 (64-bit version)
11
* Copyright (c) 2000 - 2020 Intel Corporation
12
*
13
- * Disassembly of tests/data/acpi/virt/FACP, Mon Jan 22 13:48:40 2024
14
+ * Disassembly of /tmp/aml-W8RZH2, Mon Jan 22 13:48:40 2024
15
*
16
* ACPI Data Table [FACP]
17
*
18
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
19
*/
20
21
[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
22
[004h 0004 4] Table Length : 00000114
23
[008h 0008 1] Revision : 06
24
-[009h 0009 1] Checksum : 15
25
+[009h 0009 1] Checksum : 12
26
[00Ah 0010 6] Oem ID : "BOCHS "
27
[010h 0016 8] Oem Table ID : "BXPC "
28
[018h 0024 4] Oem Revision : 00000001
29
[01Ch 0028 4] Asl Compiler ID : "BXPC"
30
[020h 0032 4] Asl Compiler Revision : 00000001
31
32
[024h 0036 4] FACS Address : 00000000
33
[028h 0040 4] DSDT Address : 00000000
34
[02Ch 0044 1] Model : 00
35
[02Dh 0045 1] PM Profile : 00 [Unspecified]
36
[02Eh 0046 2] SCI Interrupt : 0000
37
[030h 0048 4] SMI Command Port : 00000000
38
[034h 0052 1] ACPI Enable Value : 00
39
[035h 0053 1] ACPI Disable Value : 00
40
[036h 0054 1] S4BIOS Command : 00
41
[037h 0055 1] P-State Control : 00
42
@@ -XXX,XX +XXX,XX @@
43
Use APIC Physical Destination Mode (V4) : 0
44
Hardware Reduced (V5) : 1
45
Low Power S0 Idle (V5) : 0
46
47
[074h 0116 12] Reset Register : [Generic Address Structure]
48
[074h 0116 1] Space ID : 00 [SystemMemory]
49
[075h 0117 1] Bit Width : 00
50
[076h 0118 1] Bit Offset : 00
51
[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy]
52
[078h 0120 8] Address : 0000000000000000
53
54
[080h 0128 1] Value to cause reset : 00
55
[081h 0129 2] ARM Flags (decoded below) : 0003
56
PSCI Compliant : 1
57
Must use HVC for PSCI : 1
58
59
-[083h 0131 1] FADT Minor Revision : 00
60
+[083h 0131 1] FADT Minor Revision : 03
61
[084h 0132 8] FACS Address : 0000000000000000
62
[08Ch 0140 8] DSDT Address : 0000000000000000
63
[094h 0148 12] PM1A Event Block : [Generic Address Structure]
64
[094h 0148 1] Space ID : 00 [SystemMemory]
65
[095h 0149 1] Bit Width : 00
66
[096h 0150 1] Bit Offset : 00
67
[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy]
68
[098h 0152 8] Address : 0000000000000000
69
70
[0A0h 0160 12] PM1B Event Block : [Generic Address Structure]
71
[0A0h 0160 1] Space ID : 00 [SystemMemory]
72
[0A1h 0161 1] Bit Width : 00
73
[0A2h 0162 1] Bit Offset : 00
74
[0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy]
75
[0A4h 0164 8] Address : 0000000000000000
76
77
@@ -XXX,XX +XXX,XX @@
78
[0F5h 0245 1] Bit Width : 00
79
[0F6h 0246 1] Bit Offset : 00
80
[0F7h 0247 1] Encoded Access Width : 00 [Undefined/Legacy]
81
[0F8h 0248 8] Address : 0000000000000000
82
83
[100h 0256 12] Sleep Status Register : [Generic Address Structure]
84
[100h 0256 1] Space ID : 00 [SystemMemory]
85
[101h 0257 1] Bit Width : 00
86
[102h 0258 1] Bit Offset : 00
87
[103h 0259 1] Encoded Access Width : 00 [Undefined/Legacy]
88
[104h 0260 8] Address : 0000000000000000
89
90
[10Ch 0268 8] Hypervisor ID : 00000000554D4551
91
92
Raw Table Data: Length 276 (0x114)
93
94
- 0000: 46 41 43 50 14 01 00 00 06 15 42 4F 43 48 53 20 // FACP......BOCHS
95
+ 0000: 46 41 43 50 14 01 00 00 06 12 42 4F 43 48 53 20 // FACP......BOCHS
96
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
97
0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
98
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
99
0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
100
0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
101
0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
102
0070: 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
103
- 0080: 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
104
+ 0080: 00 03 00 03 00 00 00 00 00 00 00 00 00 00 00 00 // ................
105
0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
106
00A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
107
00B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
108
00C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
109
00D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
110
00E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
111
00F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
112
0100: 00 00 00 00 00 00 00 00 00 00 00 00 51 45 4D 55 // ............QEMU
113
0110: 00 00 00 00 // ....
114
115
@@ -XXX,XX +XXX,XX @@
116
/*
117
* Intel ACPI Component Architecture
118
* AML/ASL+ Disassembler version 20200925 (64-bit version)
119
* Copyright (c) 2000 - 2020 Intel Corporation
120
*
121
- * Disassembly of tests/data/acpi/virt/GTDT, Mon Jan 22 13:48:40 2024
122
+ * Disassembly of /tmp/aml-XDSZH2, Mon Jan 22 13:48:40 2024
123
*
124
* ACPI Data Table [GTDT]
125
*
126
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
127
*/
128
129
[000h 0000 4] Signature : "GTDT" [Generic Timer Description Table]
130
-[004h 0004 4] Table Length : 00000060
131
-[008h 0008 1] Revision : 02
132
-[009h 0009 1] Checksum : 9C
133
+[004h 0004 4] Table Length : 00000068
134
+[008h 0008 1] Revision : 03
135
+[009h 0009 1] Checksum : 93
136
[00Ah 0010 6] Oem ID : "BOCHS "
137
[010h 0016 8] Oem Table ID : "BXPC "
138
[018h 0024 4] Oem Revision : 00000001
139
[01Ch 0028 4] Asl Compiler ID : "BXPC"
140
[020h 0032 4] Asl Compiler Revision : 00000001
141
142
[024h 0036 8] Counter Block Address : FFFFFFFFFFFFFFFF
143
[02Ch 0044 4] Reserved : 00000000
144
145
[030h 0048 4] Secure EL1 Interrupt : 0000001D
146
[034h 0052 4] EL1 Flags (decoded below) : 00000000
147
Trigger Mode : 0
148
Polarity : 0
149
Always On : 0
150
151
[038h 0056 4] Non-Secure EL1 Interrupt : 0000001E
152
@@ -XXX,XX +XXX,XX @@
153
154
[040h 0064 4] Virtual Timer Interrupt : 0000001B
155
[044h 0068 4] VT Flags (decoded below) : 00000000
156
Trigger Mode : 0
157
Polarity : 0
158
Always On : 0
159
160
[048h 0072 4] Non-Secure EL2 Interrupt : 0000001A
161
[04Ch 0076 4] NEL2 Flags (decoded below) : 00000000
162
Trigger Mode : 0
163
Polarity : 0
164
Always On : 0
165
[050h 0080 8] Counter Read Block Address : FFFFFFFFFFFFFFFF
166
167
[058h 0088 4] Platform Timer Count : 00000000
168
[05Ch 0092 4] Platform Timer Offset : 00000000
169
+[060h 0096 4] Virtual EL2 Timer GSIV : 00000000
170
+[064h 0100 4] Virtual EL2 Timer Flags : 00000000
171
172
-Raw Table Data: Length 96 (0x60)
173
+Raw Table Data: Length 104 (0x68)
174
175
- 0000: 47 54 44 54 60 00 00 00 02 9C 42 4F 43 48 53 20 // GTDT`.....BOCHS
176
+ 0000: 47 54 44 54 68 00 00 00 03 93 42 4F 43 48 53 20 // GTDTh.....BOCHS
177
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
178
0020: 01 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 00 // ................
179
0030: 1D 00 00 00 00 00 00 00 1E 00 00 00 04 00 00 00 // ................
180
0040: 1B 00 00 00 00 00 00 00 1A 00 00 00 00 00 00 00 // ................
181
0050: FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 // ................
182
+ 0060: 00 00 00 00 00 00 00 00 // ........
183
184
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
185
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
186
Message-id: 20240122143537.233498-4-peter.maydell@linaro.org
187
---
188
tests/qtest/bios-tables-test-allowed-diff.h | 2 --
189
tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes
190
tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes
191
3 files changed, 2 deletions(-)
192
193
diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
194
index XXXXXXX..XXXXXXX 100644
195
--- a/tests/qtest/bios-tables-test-allowed-diff.h
196
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
197
@@ -1,3 +1 @@
198
/* List of comma-separated changed AML files to ignore */
199
-"tests/data/acpi/virt/FACP",
200
-"tests/data/acpi/virt/GTDT",
201
diff --git a/tests/data/acpi/virt/FACP b/tests/data/acpi/virt/FACP
202
index XXXXXXX..XXXXXXX 100644
203
GIT binary patch
204
delta 25
205
gcmbQjG=+)F&CxkPgpq-PO=u!l<;2F$$vli407<0<)c^nh
206
207
delta 28
208
kcmbQjG=+)F&CxkPgpq-PO>`nx<-|!<6Akz$^DuG%0AAS!ssI20
209
210
diff --git a/tests/data/acpi/virt/GTDT b/tests/data/acpi/virt/GTDT
211
index XXXXXXX..XXXXXXX 100644
212
GIT binary patch
213
delta 25
214
bcmYeu;BpUf3CUn!U|^m+kt>V?$N&QXMtB4L
215
216
delta 16
217
Xcmc~u;BpUf2}xjJU|^avkt+-UB60)u
218
219
--
220
2.34.1
diff view generated by jsdifflib
New patch
[PULL 14/35] hw/arm/npcm7xx: Call qemu_configure_nic_device() for GMAC modules
1
The patchset adding the GMAC ethernet to this SoC crossed in the
2
mail with the patchset cleaning up the NIC handling. When we
3
create the GMAC modules we must call qemu_configure_nic_device()
4
so that the user has the opportunity to use the -nic commandline
5
option to create a network backend and connect it to the GMACs.
1
6
7
Add the missing call.
8
9
Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC")
10
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
11
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
12
Message-id: 20240206171231.396392-2-peter.maydell@linaro.org
13
---
14
hw/arm/npcm7xx.c | 1 +
15
1 file changed, 1 insertion(+)
16
17
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
18
index XXXXXXX..XXXXXXX 100644
19
--- a/hw/arm/npcm7xx.c
20
+++ b/hw/arm/npcm7xx.c
21
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
22
for (i = 0; i < ARRAY_SIZE(s->gmac); i++) {
23
SysBusDevice *sbd = SYS_BUS_DEVICE(&s->gmac[i]);
24
25
+ qemu_configure_nic_device(DEVICE(sbd), false, NULL);
26
/*
27
* The device exists regardless of whether it's connected to a QEMU
28
* netdev backend. So always instantiate it even if there is no
29
--
30
2.34.1
diff view generated by jsdifflib
New patch
[PULL 15/35] tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend
1
Currently QEMU will warn if there is a NIC on the board that
2
is not connected to a backend. By default the '-nic user' will
3
get used for all NICs, but if you manually connect a specific
4
NIC to a specific backend, then the other NICs on the board
5
have no backend and will be warned about:
1
6
7
qemu-system-arm: warning: nic npcm7xx-emc.1 has no peer
8
qemu-system-arm: warning: nic npcm-gmac.0 has no peer
9
qemu-system-arm: warning: nic npcm-gmac.1 has no peer
10
11
So suppress those warnings by manually connecting every NIC
12
on the board to some backend.
13
14
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
15
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
16
Reviewed-by: Thomas Huth <thuth@redhat.com>
17
Message-id: 20240206171231.396392-3-peter.maydell@linaro.org
18
---
19
tests/qtest/npcm7xx_emc-test.c | 5 ++++-
20
1 file changed, 4 insertions(+), 1 deletion(-)
21
22
diff --git a/tests/qtest/npcm7xx_emc-test.c b/tests/qtest/npcm7xx_emc-test.c
23
index XXXXXXX..XXXXXXX 100644
24
--- a/tests/qtest/npcm7xx_emc-test.c
25
+++ b/tests/qtest/npcm7xx_emc-test.c
26
@@ -XXX,XX +XXX,XX @@ static int *packet_test_init(int module_num, GString *cmd_line)
27
* KISS and use -nic. The driver accepts 'emc0' and 'emc1' as aliases
28
* in the 'model' field to specify the device to match.
29
*/
30
- g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d ",
31
+ g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d "
32
+ "-nic user,model=npcm7xx-emc "
33
+ "-nic user,model=npcm-gmac "
34
+ "-nic user,model=npcm-gmac",
35
test_sockets[1], module_num);
36
37
g_test_queue_destroy(packet_test_clear, test_sockets);
38
--
39
2.34.1
diff view generated by jsdifflib
[Qemu-devel] [PULL 03/12] target-arm: Add support for PMU register PMINTENSET_EL1
[PULL 16/35] target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU
1
From: Wei Huang <wei@redhat.com>
1
It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile
2
CPU, and in fact if you try to do it we will assert:
2
3
3
This patch adds access support for PMINTENSET_EL1.
4
#6 0x00007ffff4b95e96 in __GI___assert_fail
5
(assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101
6
#7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600
7
#8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595
8
#9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512
4
9
5
Signed-off-by: Wei Huang <wei@redhat.com>
10
We might call pmu_counter_enabled() on an M-profile CPU (for example
6
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
11
from the migration pre/post hooks in machine.c); this should always
7
Message-id: 1486504171-26807-4-git-send-email-wei@redhat.com
12
return false because these CPUs don't set ARM_FEATURE_PMU.
13
14
Avoid the assertion by not calling arm_mdcr_el2_eff() before we
15
have done the early return for "PMU not present".
16
17
This fixes an assertion failure if you try to do a loadvm or
18
savevm for an M-profile board.
19
20
Cc: qemu-stable@nongnu.org
21
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155
8
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
23
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
24
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
25
Message-id: 20240208153346.970021-1-peter.maydell@linaro.org
9
---
26
---
10
target/arm/cpu.h | 2 +-
27
target/arm/helper.c | 12 ++++++++++--
11
target/arm/helper.c | 10 +++++++++-
28
1 file changed, 10 insertions(+), 2 deletions(-)
12
2 files changed, 10 insertions(+), 2 deletions(-)
13
29
14
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
15
index XXXXXXX..XXXXXXX 100644
16
--- a/target/arm/cpu.h
17
+++ b/target/arm/cpu.h
18
@@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState {
19
uint32_t c9_pmovsr; /* perf monitor overflow status */
20
uint32_t c9_pmuserenr; /* perf monitor user enable */
21
uint64_t c9_pmselr; /* perf monitor counter selection register */
22
- uint32_t c9_pminten; /* perf monitor interrupt enables */
23
+ uint64_t c9_pminten; /* perf monitor interrupt enables */
24
union { /* Memory attribute redirection */
25
struct {
26
#ifdef HOST_WORDS_BIGENDIAN
27
diff --git a/target/arm/helper.c b/target/arm/helper.c
30
diff --git a/target/arm/helper.c b/target/arm/helper.c
28
index XXXXXXX..XXXXXXX 100644
31
index XXXXXXX..XXXXXXX 100644
29
--- a/target/arm/helper.c
32
--- a/target/arm/helper.c
30
+++ b/target/arm/helper.c
33
+++ b/target/arm/helper.c
31
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
34
@@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
32
.writefn = pmuserenr_write, .raw_writefn = raw_write },
35
bool enabled, prohibited = false, filtered;
33
{ .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
36
bool secure = arm_is_secure(env);
34
.access = PL1_RW, .accessfn = access_tpm,
37
int el = arm_current_el(env);
35
- .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
38
- uint64_t mdcr_el2 = arm_mdcr_el2_eff(env);
36
+ .type = ARM_CP_ALIAS,
39
- uint8_t hpmn = mdcr_el2 & MDCR_HPMN;
37
+ .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pminten),
40
+ uint64_t mdcr_el2;
38
.resetvalue = 0,
41
+ uint8_t hpmn;
39
.writefn = pmintenset_write, .raw_writefn = raw_write },
42
40
+ { .name = "PMINTENSET_EL1", .state = ARM_CP_STATE_AA64,
43
+ /*
41
+ .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 1,
44
+ * We might be called for M-profile cores where MDCR_EL2 doesn't
42
+ .access = PL1_RW, .accessfn = access_tpm,
45
+ * exist and arm_mdcr_el2_eff() will assert, so this early-exit check
43
+ .type = ARM_CP_IO,
46
+ * must be before we read that value.
44
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
47
+ */
45
+ .writefn = pmintenset_write, .raw_writefn = raw_write,
48
if (!arm_feature(env, ARM_FEATURE_PMU)) {
46
+ .resetvalue = 0x0 },
49
return false;
47
{ .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
50
}
48
.access = PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
51
49
.fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
52
+ mdcr_el2 = arm_mdcr_el2_eff(env);
53
+ hpmn = mdcr_el2 & MDCR_HPMN;
54
+
55
if (!arm_feature(env, ARM_FEATURE_EL2) ||
56
(counter < hpmn || counter == 31)) {
57
e = env->cp15.c9_pmcr & PMCRE;
50
--
58
--
51
2.7.4
59
2.34.1
52
60
53
61
diff view generated by jsdifflib
New patch
[PULL 17/35] tests/qtest: Fix GMAC test to run on a machine in upstream QEMU
1
From: Nabih Estefan <nabihestefan@google.com>
1
2
3
Fix the nocm_gmac-test.c file to run on a nuvoton 7xx machine instead
4
of 8xx. Also fix comments referencing this and values expecting 8xx.
5
6
Change-Id: Iabd0fba14910c3f1e883c4a9521350f3db9ffab8
7
Signed-Off-By: Nabih Estefan <nabihestefan@google.com>
8
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
9
Message-id: 20240208194759.2858582-2-nabihestefan@google.com
10
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
11
[PMM: commit message tweaks]
12
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
13
---
14
tests/qtest/npcm_gmac-test.c | 84 +-----------------------------------
15
tests/qtest/meson.build | 3 +-
16
2 files changed, 4 insertions(+), 83 deletions(-)
17
18
diff --git a/tests/qtest/npcm_gmac-test.c b/tests/qtest/npcm_gmac-test.c
19
index XXXXXXX..XXXXXXX 100644
20
--- a/tests/qtest/npcm_gmac-test.c
21
+++ b/tests/qtest/npcm_gmac-test.c
22
@@ -XXX,XX +XXX,XX @@ typedef struct TestData {
23
const GMACModule *module;
24
} TestData;
25
26
-/* Values extracted from hw/arm/npcm8xx.c */
27
+/* Values extracted from hw/arm/npcm7xx.c */
28
static const GMACModule gmac_module_list[] = {
29
{
30
.irq = 14,
31
@@ -XXX,XX +XXX,XX @@ static const GMACModule gmac_module_list[] = {
32
.irq = 15,
33
.base_addr = 0xf0804000
34
},
35
- {
36
- .irq = 16,
37
- .base_addr = 0xf0806000
38
- },
39
- {
40
- .irq = 17,
41
- .base_addr = 0xf0808000
42
- }
43
};
44
45
/* Returns the index of the GMAC module. */
46
@@ -XXX,XX +XXX,XX @@ static uint32_t gmac_read(QTestState *qts, const GMACModule *mod,
47
return qtest_readl(qts, mod->base_addr + regno);
48
}
49
50
-static uint16_t pcs_read(QTestState *qts, const GMACModule *mod,
51
- NPCMRegister regno)
52
-{
53
- uint32_t write_value = (regno & 0x3ffe00) >> 9;
54
- qtest_writel(qts, PCS_BASE_ADDRESS + NPCM_PCS_IND_AC_BA, write_value);
55
- uint32_t read_offset = regno & 0x1ff;
56
- return qtest_readl(qts, PCS_BASE_ADDRESS + read_offset);
57
-}
58
-
59
/* Check that GMAC registers are reset to default value */
60
static void test_init(gconstpointer test_data)
61
{
62
const TestData *td = test_data;
63
const GMACModule *mod = td->module;
64
- QTestState *qts = qtest_init("-machine npcm845-evb");
65
+ QTestState *qts = qtest_init("-machine npcm750-evb");
66
67
#define CHECK_REG32(regno, value) \
68
do { \
69
g_assert_cmphex(gmac_read(qts, mod, (regno)), ==, (value)); \
70
} while (0)
71
72
-#define CHECK_REG_PCS(regno, value) \
73
- do { \
74
- g_assert_cmphex(pcs_read(qts, mod, (regno)), ==, (value)); \
75
- } while (0)
76
-
77
CHECK_REG32(NPCM_DMA_BUS_MODE, 0x00020100);
78
CHECK_REG32(NPCM_DMA_XMT_POLL_DEMAND, 0);
79
CHECK_REG32(NPCM_DMA_RCV_POLL_DEMAND, 0);
80
@@ -XXX,XX +XXX,XX @@ static void test_init(gconstpointer test_data)
81
CHECK_REG32(NPCM_GMAC_PTP_TAR, 0);
82
CHECK_REG32(NPCM_GMAC_PTP_TTSR, 0);
83
84
- /* TODO Add registers PCS */
85
- if (mod->base_addr == 0xf0802000) {
86
- CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID1, 0x699e);
87
- CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID2, 0);
88
- CHECK_REG_PCS(NPCM_PCS_SR_CTL_STS, 0x8000);
89
-
90
- CHECK_REG_PCS(NPCM_PCS_SR_MII_CTRL, 0x1140);
91
- CHECK_REG_PCS(NPCM_PCS_SR_MII_STS, 0x0109);
92
- CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID1, 0x699e);
93
- CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID2, 0x0ced0);
94
- CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_ADV, 0x0020);
95
- CHECK_REG_PCS(NPCM_PCS_SR_MII_LP_BABL, 0);
96
- CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_EXPN, 0);
97
- CHECK_REG_PCS(NPCM_PCS_SR_MII_EXT_STS, 0xc000);
98
-
99
- CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_ABL, 0x0003);
100
- CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_LWR, 0x0038);
101
- CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_UPR, 0);
102
- CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_LWR, 0x0038);
103
- CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_UPR, 0);
104
- CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_LWR, 0x0058);
105
- CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_UPR, 0);
106
- CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_LWR, 0x0048);
107
- CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_UPR, 0);
108
-
109
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MMD_DIG_CTRL1, 0x2400);
110
- CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_CTRL, 0);
111
- CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_INTR_STS, 0x000a);
112
- CHECK_REG_PCS(NPCM_PCS_VR_MII_TC, 0);
113
- CHECK_REG_PCS(NPCM_PCS_VR_MII_DBG_CTRL, 0);
114
- CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL0, 0x899c);
115
- CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_TXTIMER, 0);
116
- CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_RXTIMER, 0);
117
- CHECK_REG_PCS(NPCM_PCS_VR_MII_LINK_TIMER_CTRL, 0);
118
- CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL1, 0);
119
- CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_STS, 0x0010);
120
- CHECK_REG_PCS(NPCM_PCS_VR_MII_ICG_ERRCNT1, 0);
121
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MISC_STS, 0);
122
- CHECK_REG_PCS(NPCM_PCS_VR_MII_RX_LSTS, 0);
123
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_BSTCTRL0, 0x00a);
124
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_LVLCTRL0, 0x007f);
125
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL0, 0x0001);
126
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL1, 0);
127
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_STS, 0);
128
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL0, 0x0100);
129
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL1, 0x1100);
130
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_LOS_CTRL0, 0x000e);
131
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL0, 0x0100);
132
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL1, 0x0032);
133
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_STS, 0x0001);
134
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL2, 0);
135
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_LVL_CTRL, 0x0019);
136
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL0, 0);
137
- CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL1, 0);
138
- CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_CTRL2, 0);
139
- CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_ERRCNT_SEL, 0);
140
- }
141
-
142
qtest_quit(qts);
143
}
144
145
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
146
index XXXXXXX..XXXXXXX 100644
147
--- a/tests/qtest/meson.build
148
+++ b/tests/qtest/meson.build
149
@@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \
150
'npcm7xx_sdhci-test',
151
'npcm7xx_smbus-test',
152
'npcm7xx_timer-test',
153
- 'npcm7xx_watchdog_timer-test'] + \
154
+ 'npcm7xx_watchdog_timer-test',
155
+ 'npcm_gmac-test'] + \
156
(slirp.found() ? ['npcm7xx_emc-test'] : [])
157
qtests_aspeed = \
158
['aspeed_hace-test',
159
--
160
2.34.1
diff view generated by jsdifflib
New patch
[PULL 18/35] hw/arm/smmuv3: add support for stage 1 access fault
1
From: Luc Michel <luc.michel@amd.com>
1
2
3
An access fault is raised when the Access Flag is not set in the
4
looked-up PTE and the AFFD field is not set in the corresponding context
5
descriptor. This was already implemented for stage 2. Implement it for
6
stage 1 as well.
7
8
Signed-off-by: Luc Michel <luc.michel@amd.com>
9
Reviewed-by: Mostafa Saleh <smostafa@google.com>
10
Reviewed-by: Eric Auger <eric.auger@redhat.com>
11
Tested-by: Mostafa Saleh <smostafa@google.com>
12
Message-id: 20240213082211.3330400-1-luc.michel@amd.com
13
[PMM: tweaked comment text]
14
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
15
---
16
hw/arm/smmuv3-internal.h | 1 +
17
include/hw/arm/smmu-common.h | 1 +
18
hw/arm/smmu-common.c | 11 +++++++++++
19
hw/arm/smmuv3.c | 1 +
20
4 files changed, 14 insertions(+)
21
22
diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h
23
index XXXXXXX..XXXXXXX 100644
24
--- a/hw/arm/smmuv3-internal.h
25
+++ b/hw/arm/smmuv3-internal.h
26
@@ -XXX,XX +XXX,XX @@ static inline int pa_range(STE *ste)
27
#define CD_EPD(x, sel) extract32((x)->word[0], (16 * (sel)) + 14, 1)
28
#define CD_ENDI(x) extract32((x)->word[0], 15, 1)
29
#define CD_IPS(x) extract32((x)->word[1], 0 , 3)
30
+#define CD_AFFD(x) extract32((x)->word[1], 3 , 1)
31
#define CD_TBI(x) extract32((x)->word[1], 6 , 2)
32
#define CD_HD(x) extract32((x)->word[1], 10 , 1)
33
#define CD_HA(x) extract32((x)->word[1], 11 , 1)
34
diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h
35
index XXXXXXX..XXXXXXX 100644
36
--- a/include/hw/arm/smmu-common.h
37
+++ b/include/hw/arm/smmu-common.h
38
@@ -XXX,XX +XXX,XX @@ typedef struct SMMUTransCfg {
39
bool disabled; /* smmu is disabled */
40
bool bypassed; /* translation is bypassed */
41
bool aborted; /* translation is aborted */
42
+ bool affd; /* AF fault disable */
43
uint32_t iotlb_hits; /* counts IOTLB hits */
44
uint32_t iotlb_misses; /* counts IOTLB misses*/
45
/* Used by stage-1 only. */
46
diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c
47
index XXXXXXX..XXXXXXX 100644
48
--- a/hw/arm/smmu-common.c
49
+++ b/hw/arm/smmu-common.c
50
@@ -XXX,XX +XXX,XX @@ static int smmu_ptw_64_s1(SMMUTransCfg *cfg,
51
pte_addr, pte, iova, gpa,
52
block_size >> 20);
53
}
54
+
55
+ /*
56
+ * QEMU does not currently implement HTTU, so if AFFD and PTE.AF
57
+ * are 0 we take an Access flag fault. (5.4. Context Descriptor)
58
+ * An Access flag fault takes priority over a Permission fault.
59
+ */
60
+ if (!PTE_AF(pte) && !cfg->affd) {
61
+ info->type = SMMU_PTW_ERR_ACCESS;
62
+ goto error;
63
+ }
64
+
65
ap = PTE_AP(pte);
66
if (is_permission_fault(ap, perm)) {
67
info->type = SMMU_PTW_ERR_PERMISSION;
68
diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c
69
index XXXXXXX..XXXXXXX 100644
70
--- a/hw/arm/smmuv3.c
71
+++ b/hw/arm/smmuv3.c
72
@@ -XXX,XX +XXX,XX @@ static int decode_cd(SMMUTransCfg *cfg, CD *cd, SMMUEventInfo *event)
73
cfg->oas = MIN(oas2bits(SMMU_IDR5_OAS), cfg->oas);
74
cfg->tbi = CD_TBI(cd);
75
cfg->asid = CD_ASID(cd);
76
+ cfg->affd = CD_AFFD(cd);
77
78
trace_smmuv3_decode_cd(cfg->oas);
79
80
--
81
2.34.1
diff view generated by jsdifflib
[Qemu-devel] [PULL 05/12] target-arm: Declare virtio-mmio as dma-coherent in dt
[PULL 19/35] hw/arm/stellaris: Convert ADC controller to Resettable interface
1
From: Alexander Graf <agraf@suse.de>
1
From: Philippe Mathieu-Daudé <philmd@linaro.org>
2
2
3
QEMU emulated hardware is always dma coherent with its guest. We do
3
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
4
annotate that correctly on the PCI host controller, but left out
4
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
5
virtio-mmio.
5
Message-id: 20240213155214.13619-2-philmd@linaro.org
6
7
Recent kernels have started to interpret that flag rather than take
8
dma coherency as granted with virtio-mmio. While that is considered
9
a kernel bug, as it breaks previously working systems, it showed that
10
our dt description is incomplete.
11
12
This patch adds the respective marker that allows guest OSs to evaluate
13
that our virtio-mmio devices are indeed cache coherent.
14
15
Signed-off-by: Alexander Graf <agraf@suse.de>
16
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
17
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
18
Message-id: 1486644810-33181-2-git-send-email-agraf@suse.de
19
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
6
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
20
---
7
---
21
hw/arm/vexpress.c | 1 +
8
hw/arm/stellaris.c | 6 ++++--
22
hw/arm/virt.c | 1 +
9
1 file changed, 4 insertions(+), 2 deletions(-)
23
2 files changed, 2 insertions(+)
24
10
25
diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
11
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
26
index XXXXXXX..XXXXXXX 100644
12
index XXXXXXX..XXXXXXX 100644
27
--- a/hw/arm/vexpress.c
13
--- a/hw/arm/stellaris.c
28
+++ b/hw/arm/vexpress.c
14
+++ b/hw/arm/stellaris.c
29
@@ -XXX,XX +XXX,XX @@ static int add_virtio_mmio_node(void *fdt, uint32_t acells, uint32_t scells,
15
@@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level)
30
acells, addr, scells, size);
31
qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", intc);
32
qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 0, irq, 1);
33
+ qemu_fdt_setprop(fdt, nodename, "dma-coherent", NULL, 0);
34
g_free(nodename);
35
if (rc) {
36
return -1;
37
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
38
index XXXXXXX..XXXXXXX 100644
39
--- a/hw/arm/virt.c
40
+++ b/hw/arm/virt.c
41
@@ -XXX,XX +XXX,XX @@ static void create_virtio_devices(const VirtMachineState *vms, qemu_irq *pic)
42
qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts",
43
GIC_FDT_IRQ_TYPE_SPI, irq,
44
GIC_FDT_IRQ_FLAGS_EDGE_LO_HI);
45
+ qemu_fdt_setprop(vms->fdt, nodename, "dma-coherent", NULL, 0);
46
g_free(nodename);
47
}
16
}
48
}
17
}
18
19
-static void stellaris_adc_reset(StellarisADCState *s)
20
+static void stellaris_adc_reset_hold(Object *obj)
21
{
22
+ StellarisADCState *s = STELLARIS_ADC(obj);
23
int n;
24
25
for (n = 0; n < 4; n++) {
26
@@ -XXX,XX +XXX,XX @@ static void stellaris_adc_init(Object *obj)
27
memory_region_init_io(&s->iomem, obj, &stellaris_adc_ops, s,
28
"adc", 0x1000);
29
sysbus_init_mmio(sbd, &s->iomem);
30
- stellaris_adc_reset(s);
31
qdev_init_gpio_in(dev, stellaris_adc_trigger, 1);
32
}
33
34
@@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_i2c_info = {
35
static void stellaris_adc_class_init(ObjectClass *klass, void *data)
36
{
37
DeviceClass *dc = DEVICE_CLASS(klass);
38
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
39
40
+ rc->phases.hold = stellaris_adc_reset_hold;
41
dc->vmsd = &vmstate_stellaris_adc;
42
}
43
49
--
44
--
50
2.7.4
45
2.34.1
51
46
52
47
diff view generated by jsdifflib
[Qemu-devel] [PULL 02/12] target-arm: Add support for AArch64 PMU register PMXEVTYPER_EL0
[PULL 20/35] hw/arm/stellaris: Convert I2C controller to Resettable interface
1
From: Wei Huang <wei@redhat.com>
1
From: Philippe Mathieu-Daudé <philmd@linaro.org>
2
2
3
In order to support Linux perf, which uses PMXEVTYPER register,
3
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
4
this patch adds read/write access support for PMXEVTYPER. The access
4
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
5
is CONSTRAINED UNPREDICTABLE when PMSELR is not 0x1f. Additionally
5
Message-id: 20240213155214.13619-3-philmd@linaro.org
6
this patch adds support for PMXEVTYPER_EL0.
7
8
Signed-off-by: Wei Huang <wei@redhat.com>
9
Message-id: 1486504171-26807-3-git-send-email-wei@redhat.com
10
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
6
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
12
---
8
---
13
target/arm/cpu.h | 1 -
9
hw/arm/stellaris.c | 26 ++++++++++++++++++++++----
14
target/arm/helper.c | 30 +++++++++++++++++++++++++-----
10
1 file changed, 22 insertions(+), 4 deletions(-)
15
2 files changed, 25 insertions(+), 6 deletions(-)
16
11
17
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
12
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
18
index XXXXXXX..XXXXXXX 100644
13
index XXXXXXX..XXXXXXX 100644
19
--- a/target/arm/cpu.h
14
--- a/hw/arm/stellaris.c
20
+++ b/target/arm/cpu.h
15
+++ b/hw/arm/stellaris.c
21
@@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState {
16
@@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj)
22
uint64_t c9_pmcr; /* performance monitor control register */
17
s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK");
23
uint64_t c9_pmcnten; /* perf monitor counter enables */
18
}
24
uint32_t c9_pmovsr; /* perf monitor overflow status */
19
25
- uint32_t c9_pmxevtyper; /* perf monitor event type */
20
-/* I2C controller. */
26
uint32_t c9_pmuserenr; /* perf monitor user enable */
21
+/*
27
uint64_t c9_pmselr; /* perf monitor counter selection register */
22
+ * I2C controller.
28
uint32_t c9_pminten; /* perf monitor interrupt enables */
23
+ * ??? For now we only implement the master interface.
29
diff --git a/target/arm/helper.c b/target/arm/helper.c
24
+ */
30
index XXXXXXX..XXXXXXX 100644
25
31
--- a/target/arm/helper.c
26
#define TYPE_STELLARIS_I2C "stellaris-i2c"
32
+++ b/target/arm/helper.c
27
OBJECT_DECLARE_SIMPLE_TYPE(stellaris_i2c_state, STELLARIS_I2C)
33
@@ -XXX,XX +XXX,XX @@ static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
28
@@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_write(void *opaque, hwaddr offset,
34
static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
29
stellaris_i2c_update(s);
35
uint64_t value)
30
}
31
32
-static void stellaris_i2c_reset(stellaris_i2c_state *s)
33
+static void stellaris_i2c_reset_enter(Object *obj, ResetType type)
36
{
34
{
37
- env->cp15.c9_pmxevtyper = value & 0xff;
35
+ stellaris_i2c_state *s = STELLARIS_I2C(obj);
38
+ /* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when
36
+
39
+ * PMSELR value is equal to or greater than the number of implemented
37
if (s->mcs & STELLARIS_I2C_MCS_BUSBSY)
40
+ * counters, but not equal to 0x1f. We opt to behave as a RAZ/WI.
38
i2c_end_transfer(s->bus);
41
+ */
42
+ if (env->cp15.c9_pmselr == 0x1f) {
43
+ pmccfiltr_write(env, ri, value);
44
+ }
45
+}
39
+}
46
+
40
+
47
+static uint64_t pmxevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri)
41
+static void stellaris_i2c_reset_hold(Object *obj)
48
+{
42
+{
49
+ /* We opt to behave as a RAZ/WI when attempts to access PMXEVTYPER
43
+ stellaris_i2c_state *s = STELLARIS_I2C(obj);
50
+ * are CONSTRAINED UNPREDICTABLE. See comments in pmxevtyper_write().
44
51
+ */
45
s->msa = 0;
52
+ if (env->cp15.c9_pmselr == 0x1f) {
46
s->mcs = 0;
53
+ return env->cp15.pmccfiltr_el0;
47
@@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset(stellaris_i2c_state *s)
54
+ } else {
48
s->mimr = 0;
55
+ return 0;
49
s->mris = 0;
56
+ }
50
s->mcr = 0;
51
+}
52
+
53
+static void stellaris_i2c_reset_exit(Object *obj)
54
+{
55
+ stellaris_i2c_state *s = STELLARIS_I2C(obj);
56
+
57
stellaris_i2c_update(s);
57
}
58
}
58
59
59
static void pmuserenr_write(CPUARMState *env, const ARMCPRegInfo *ri,
60
@@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj)
60
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
61
memory_region_init_io(&s->iomem, obj, &stellaris_i2c_ops, s,
61
.fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0),
62
"i2c", 0x1000);
62
.resetvalue = 0, },
63
sysbus_init_mmio(sbd, &s->iomem);
63
{ .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 1,
64
- /* ??? For now we only implement the master interface. */
64
- .access = PL0_RW,
65
- stellaris_i2c_reset(s);
65
- .fieldoffset = offsetof(CPUARMState, cp15.c9_pmxevtyper),
66
}
66
- .accessfn = pmreg_access, .writefn = pmxevtyper_write,
67
67
- .raw_writefn = raw_write },
68
/* Analogue to Digital Converter. This is only partially implemented,
68
+ .access = PL0_RW, .type = ARM_CP_NO_RAW, .accessfn = pmreg_access,
69
@@ -XXX,XX +XXX,XX @@ type_init(stellaris_machine_init)
69
+ .writefn = pmxevtyper_write, .readfn = pmxevtyper_read },
70
static void stellaris_i2c_class_init(ObjectClass *klass, void *data)
70
+ { .name = "PMXEVTYPER_EL0", .state = ARM_CP_STATE_AA64,
71
{
71
+ .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 1,
72
DeviceClass *dc = DEVICE_CLASS(klass);
72
+ .access = PL0_RW, .type = ARM_CP_NO_RAW, .accessfn = pmreg_access,
73
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
73
+ .writefn = pmxevtyper_write, .readfn = pmxevtyper_read },
74
74
/* Unimplemented, RAZ/WI. */
75
+ rc->phases.enter = stellaris_i2c_reset_enter;
75
{ .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2,
76
+ rc->phases.hold = stellaris_i2c_reset_hold;
76
.access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
77
+ rc->phases.exit = stellaris_i2c_reset_exit;
78
dc->vmsd = &vmstate_stellaris_i2c;
79
}
80
77
--
81
--
78
2.7.4
82
2.34.1
79
83
80
84
diff view generated by jsdifflib
[Qemu-devel] [PULL 11/12] aspeed/smc: handle dummies only in fast read mode
[PULL 21/35] hw/arm/stellaris: Add missing QOM 'machine' parent
1
From: Cédric Le Goater <clg@kaod.org>
1
From: Philippe Mathieu-Daudé <philmd@linaro.org>
2
2
3
HW works fine in normal read mode with dummy bytes being set. So let's
3
QDev objects created with qdev_new() need to manually add
4
check this case to not transfer bytes.
4
their parent relationship with object_property_add_child().
5
5
6
Signed-off-by: Cédric Le Goater <clg@kaod.org>
6
This commit plug the devices which aren't part of the SoC;
7
Message-id: 1486648058-520-4-git-send-email-clg@kaod.org
7
they will be plugged into a SoC container in the next one.
8
9
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
10
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
11
Message-id: 20240213155214.13619-4-philmd@linaro.org
8
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
12
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
9
---
13
---
10
hw/ssi/aspeed_smc.c | 9 ++++++---
14
hw/arm/stellaris.c | 4 ++++
11
1 file changed, 6 insertions(+), 3 deletions(-)
15
1 file changed, 4 insertions(+)
12
16
13
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
17
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
14
index XXXXXXX..XXXXXXX 100644
18
index XXXXXXX..XXXXXXX 100644
15
--- a/hw/ssi/aspeed_smc.c
19
--- a/hw/arm/stellaris.c
16
+++ b/hw/ssi/aspeed_smc.c
20
+++ b/hw/arm/stellaris.c
17
@@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size)
21
@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
18
/*
22
&error_fatal);
19
* Use fake transfers to model dummy bytes. The value should
23
20
* be configured to some non-zero value in fast read mode and
24
ssddev = qdev_new("ssd0323");
21
- * zero in read mode.
25
+ object_property_add_child(OBJECT(ms), "oled", OBJECT(ssddev));
22
+ * zero in read mode. But, as the HW allows inconsistent
26
qdev_prop_set_uint8(ssddev, "cs", 1);
23
+ * settings, let's check for fast read mode.
27
qdev_realize_and_unref(ssddev, bus, &error_fatal);
24
*/
28
25
- for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) {
29
gpio_d_splitter = qdev_new(TYPE_SPLIT_IRQ);
26
- ssi_transfer(fl->controller->spi, 0xFF);
30
+ object_property_add_child(OBJECT(ms), "splitter",
27
+ if (aspeed_smc_flash_mode(fl) == CTRL_FREADMODE) {
31
+ OBJECT(gpio_d_splitter));
28
+ for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) {
32
qdev_prop_set_uint32(gpio_d_splitter, "num-lines", 2);
29
+ ssi_transfer(fl->controller->spi, 0xFF);
33
qdev_realize_and_unref(gpio_d_splitter, NULL, &error_fatal);
30
+ }
34
qdev_connect_gpio_out(
35
@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
36
DeviceState *gpad;
37
38
gpad = qdev_new(TYPE_STELLARIS_GAMEPAD);
39
+ object_property_add_child(OBJECT(ms), "gamepad", OBJECT(gpad));
40
for (i = 0; i < ARRAY_SIZE(gpad_keycode); i++) {
41
qlist_append_int(gpad_keycode_list, gpad_keycode[i]);
31
}
42
}
32
33
for (i = 0; i < size; i++) {
34
--
43
--
35
2.7.4
44
2.34.1
36
45
37
46
diff view generated by jsdifflib
[Qemu-devel] [PULL 10/12] aspeed: remove useless comment on controller segment size
[PULL 22/35] hw/arm/stellaris: Add missing QOM 'SoC' parent
1
From: Cédric Le Goater <clg@kaod.org>
1
From: Philippe Mathieu-Daudé <philmd@linaro.org>
2
2
3
The flash devices used for the FMC controller (BMC firmware) are well
3
QDev objects created with qdev_new() need to manually add
4
defined for each Aspeed machine and are all smaller than the default
4
their parent relationship with object_property_add_child().
5
mapping window size, at least for CE0 which is the chip the SoC boots
6
from.
7
5
8
Signed-off-by: Cédric Le Goater <clg@kaod.org>
6
Since we don't model the SoC, just use a QOM container.
9
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
7
10
Message-id: 1486648058-520-3-git-send-email-clg@kaod.org
8
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
9
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
10
Message-id: 20240213155214.13619-5-philmd@linaro.org
11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
12
---
12
---
13
hw/arm/aspeed.c | 8 +++-----
13
hw/arm/stellaris.c | 11 ++++++++++-
14
1 file changed, 3 insertions(+), 5 deletions(-)
14
1 file changed, 10 insertions(+), 1 deletion(-)
15
15
16
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
16
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
17
index XXXXXXX..XXXXXXX 100644
17
index XXXXXXX..XXXXXXX 100644
18
--- a/hw/arm/aspeed.c
18
--- a/hw/arm/stellaris.c
19
+++ b/hw/arm/aspeed.c
19
+++ b/hw/arm/stellaris.c
20
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
20
@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
21
DriveInfo *dinfo = drive_get_next(IF_MTD);
21
* 400fe000 system control
22
qemu_irq cs_line;
22
*/
23
23
24
- /*
24
+ Object *soc_container;
25
- * FIXME: check that we are not using a flash module exceeding
25
DeviceState *gpio_dev[7], *nvic;
26
- * the controller segment size
26
qemu_irq gpio_in[7][8];
27
- */
27
qemu_irq gpio_out[7][8];
28
fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
28
@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
29
if (dinfo) {
29
flash_size = (((board->dc0 & 0xffff) + 1) << 1) * 1024;
30
qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
30
sram_size = ((board->dc0 >> 18) + 1) * 1024;
31
@@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine,
31
32
32
+ soc_container = object_new("container");
33
/*
33
+ object_property_add_child(OBJECT(ms), "soc", soc_container);
34
* create a ROM region using the default mapping window size of
34
+
35
- * the flash module.
35
/* Flash programming is done via the SCU, so pretend it is ROM. */
36
+ * the flash module. The window size is 64MB for the AST2400
36
memory_region_init_rom(flash, NULL, "stellaris.flash", flash_size,
37
+ * SoC and 128MB for the AST2500 SoC, which is twice as big as
37
&error_fatal);
38
+ * needed by the flash modules of the Aspeed machines.
38
@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
39
*/
39
* need its sysclk output.
40
memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom",
40
*/
41
fl->size, &error_abort);
41
ssys_dev = qdev_new(TYPE_STELLARIS_SYS);
42
+ object_property_add_child(soc_container, "sys", OBJECT(ssys_dev));
43
44
/*
45
* Most devices come preprogrammed with a MAC address in the user data.
46
@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
47
sysbus_realize_and_unref(SYS_BUS_DEVICE(ssys_dev), &error_fatal);
48
49
nvic = qdev_new(TYPE_ARMV7M);
50
+ object_property_add_child(soc_container, "v7m", OBJECT(nvic));
51
qdev_prop_set_uint32(nvic, "num-irq", NUM_IRQ_LINES);
52
qdev_prop_set_uint8(nvic, "num-prio-bits", NUM_PRIO_BITS);
53
qdev_prop_set_string(nvic, "cpu-type", ms->cpu_type);
54
@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
55
56
dev = qdev_new(TYPE_STELLARIS_GPTM);
57
sbd = SYS_BUS_DEVICE(dev);
58
+ object_property_add_child(soc_container, "gptm[*]", OBJECT(dev));
59
qdev_connect_clock_in(dev, "clk",
60
qdev_get_clock_out(ssys_dev, "SYSCLK"));
61
sysbus_realize_and_unref(sbd, &error_fatal);
62
@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
63
64
if (board->dc1 & (1 << 3)) { /* watchdog present */
65
dev = qdev_new(TYPE_LUMINARY_WATCHDOG);
66
-
67
+ object_property_add_child(soc_container, "wdg", OBJECT(dev));
68
qdev_connect_clock_in(dev, "WDOGCLK",
69
qdev_get_clock_out(ssys_dev, "SYSCLK"));
70
71
@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
72
SysBusDevice *sbd;
73
74
dev = qdev_new("pl011_luminary");
75
+ object_property_add_child(soc_container, "uart[*]", OBJECT(dev));
76
sbd = SYS_BUS_DEVICE(dev);
77
qdev_prop_set_chr(dev, "chardev", serial_hd(i));
78
sysbus_realize_and_unref(sbd, &error_fatal);
79
@@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
80
DeviceState *enet;
81
82
enet = qdev_new("stellaris_enet");
83
+ object_property_add_child(soc_container, "enet", OBJECT(enet));
84
if (nd) {
85
qdev_set_nic_properties(enet, nd);
86
} else {
42
--
87
--
43
2.7.4
88
2.34.1
44
89
45
90
diff view generated by jsdifflib
[Qemu-devel] [PULL 04/12] target-arm: Enable vPMU support under TCG mode
[PULL 23/35] target/arm: Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs
1
From: Wei Huang <wei@redhat.com>
1
We support two different encodings for the AArch32 IMPDEF
2
CBAR register -- older cores like the Cortex A9, A7, A15
3
have this at 4, c15, c0, 0; newer cores like the
4
Cortex A35, A53, A57 and A72 have it at 1 c15 c0 0.
2
5
3
This patch contains several fixes to enable vPMU under TCG mode. It
6
When we implemented this we picked which encoding to
4
first removes the checking of kvm_enabled() while unsetting
7
use based on whether the CPU set ARM_FEATURE_AARCH64.
5
ARM_FEATURE_PMU. With it, the .pmu option can be used to turn on/off vPMU
8
However this isn't right for three cases:
6
under TCG mode. Secondly the PMU node of DT table is now created under TCG.
9
* the qemu-system-arm 'max' CPU, which is supposed to be
7
The last fix is to disable the masking of PMUver field of ID_AA64DFR0_EL1.
10
a variant on a Cortex-A57; it ought to use the same
11
encoding the A57 does and which the AArch64 'max'
12
exposes to AArch32 guest code
13
* the Cortex-R52, which is AArch32-only but has the CBAR
14
at the newer encoding (and where we incorrectly are
15
not yet setting ARM_FEATURE_CBAR_RO anyway)
16
* any possible future support for other v8 AArch32
17
only CPUs, or for supporting "boot the CPU into
18
AArch32 mode" on our existing cores like the A57 etc
8
19
9
Signed-off-by: Wei Huang <wei@redhat.com>
20
Make the decision of the encoding be based on whether
10
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
21
the CPU implements the ARM_FEATURE_V8 flag instead.
11
Message-id: 1486504171-26807-5-git-send-email-wei@redhat.com
22
23
This changes the behaviour only for the qemu-system-arm
24
'-cpu max'. We don't expect anybody to be relying on the
25
old behaviour because:
26
* it's not what the real hardware Cortex-A57 does
27
(and that's what our ID register claims we are)
28
* we don't implement the memory-mapped GICv3 support
29
which is the only thing that exists at the peripheral
30
base address pointed to by the register
31
12
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
33
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
34
Message-id: 20240206132931.38376-2-peter.maydell@linaro.org
13
---
35
---
14
hw/arm/virt.c | 2 +-
36
target/arm/helper.c | 2 +-
15
target/arm/cpu.c | 2 +-
37
1 file changed, 1 insertion(+), 1 deletion(-)
16
target/arm/helper.c | 7 +------
17
3 files changed, 3 insertions(+), 8 deletions(-)
18
38
19
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
20
index XXXXXXX..XXXXXXX 100644
21
--- a/hw/arm/virt.c
22
+++ b/hw/arm/virt.c
23
@@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms)
24
CPU_FOREACH(cpu) {
25
armcpu = ARM_CPU(cpu);
26
if (!arm_feature(&armcpu->env, ARM_FEATURE_PMU) ||
27
- !kvm_arm_pmu_create(cpu, PPI(VIRTUAL_PMU_IRQ))) {
28
+ (kvm_enabled() && !kvm_arm_pmu_create(cpu, PPI(VIRTUAL_PMU_IRQ)))) {
29
return;
30
}
31
}
32
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
33
index XXXXXXX..XXXXXXX 100644
34
--- a/target/arm/cpu.c
35
+++ b/target/arm/cpu.c
36
@@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
37
unset_feature(env, ARM_FEATURE_EL2);
38
}
39
40
- if (!cpu->has_pmu || !kvm_enabled()) {
41
+ if (!cpu->has_pmu) {
42
cpu->has_pmu = false;
43
unset_feature(env, ARM_FEATURE_PMU);
44
}
45
diff --git a/target/arm/helper.c b/target/arm/helper.c
39
diff --git a/target/arm/helper.c b/target/arm/helper.c
46
index XXXXXXX..XXXXXXX 100644
40
index XXXXXXX..XXXXXXX 100644
47
--- a/target/arm/helper.c
41
--- a/target/arm/helper.c
48
+++ b/target/arm/helper.c
42
+++ b/target/arm/helper.c
49
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
43
@@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu)
50
{ .name = "ID_AA64DFR0_EL1", .state = ARM_CP_STATE_AA64,
44
* AArch64 cores we might need to add a specific feature flag
51
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 0,
45
* to indicate cores with "flavour 2" CBAR.
52
.access = PL1_R, .type = ARM_CP_CONST,
46
*/
53
- /* We mask out the PMUVer field, because we don't currently
47
- if (arm_feature(env, ARM_FEATURE_AARCH64)) {
54
- * implement the PMU. Not advertising it prevents the guest
48
+ if (arm_feature(env, ARM_FEATURE_V8)) {
55
- * from trying to use it and getting UNDEFs on registers we
49
/* 32 bit view is [31:18] 0...0 [43:32]. */
56
- * don't implement.
50
uint32_t cbar32 = (extract64(cpu->reset_cbar, 18, 14) << 18)
57
- */
51
| extract64(cpu->reset_cbar, 32, 12);
58
- .resetvalue = cpu->id_aa64dfr0 & ~0xf00 },
59
+ .resetvalue = cpu->id_aa64dfr0 },
60
{ .name = "ID_AA64DFR1_EL1", .state = ARM_CP_STATE_AA64,
61
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 1,
62
.access = PL1_R, .type = ARM_CP_CONST,
63
--
52
--
64
2.7.4
53
2.34.1
65
66
diff view generated by jsdifflib
New patch
[PULL 24/35] target/arm: The Cortex-R52 has a read-only CBAR
1
The Cortex-R52 implements the Configuration Base Address Register
2
(CBAR), as a read-only register. Add ARM_FEATURE_CBAR_RO to this CPU
3
type, so that our implementation provides the register and the
4
associated qdev property.
1
5
6
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
8
Message-id: 20240206132931.38376-3-peter.maydell@linaro.org
9
---
10
target/arm/tcg/cpu32.c | 1 +
11
1 file changed, 1 insertion(+)
12
13
diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c
14
index XXXXXXX..XXXXXXX 100644
15
--- a/target/arm/tcg/cpu32.c
16
+++ b/target/arm/tcg/cpu32.c
17
@@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj)
18
set_feature(&cpu->env, ARM_FEATURE_PMSA);
19
set_feature(&cpu->env, ARM_FEATURE_NEON);
20
set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
21
+ set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
22
cpu->midr = 0x411fd133; /* r1p3 */
23
cpu->revidr = 0x00000000;
24
cpu->reset_fpsid = 0x41034023;
25
--
26
2.34.1
diff view generated by jsdifflib
New patch
[PULL 25/35] target/arm: Add Cortex-R52 IMPDEF sysregs
1
Add the Cortex-R52 IMPDEF sysregs, by defining them here and
2
also by enabling the AUXCR feature which defines the ACTLR
3
and HACTLR registers. As is our usual practice, we make these
4
simple reads-as-zero stubs for now.
1
5
6
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
8
Message-id: 20240206132931.38376-4-peter.maydell@linaro.org
9
---
10
target/arm/tcg/cpu32.c | 108 +++++++++++++++++++++++++++++++++++++++++
11
1 file changed, 108 insertions(+)
12
13
diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c
14
index XXXXXXX..XXXXXXX 100644
15
--- a/target/arm/tcg/cpu32.c
16
+++ b/target/arm/tcg/cpu32.c
17
@@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj)
18
define_arm_cp_regs(cpu, cortexr5_cp_reginfo);
19
}
20
21
+static const ARMCPRegInfo cortex_r52_cp_reginfo[] = {
22
+ { .name = "CPUACTLR", .cp = 15, .opc1 = 0, .crm = 15,
23
+ .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
24
+ { .name = "IMP_ATCMREGIONR",
25
+ .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0,
26
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
27
+ { .name = "IMP_BTCMREGIONR",
28
+ .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1,
29
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
30
+ { .name = "IMP_CTCMREGIONR",
31
+ .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 2,
32
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
33
+ { .name = "IMP_CSCTLR",
34
+ .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 0,
35
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
36
+ { .name = "IMP_BPCTLR",
37
+ .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 1,
38
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
39
+ { .name = "IMP_MEMPROTCLR",
40
+ .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 2,
41
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
42
+ { .name = "IMP_SLAVEPCTLR",
43
+ .cp = 15, .opc1 = 0, .crn = 11, .crm = 0, .opc2 = 0,
44
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
45
+ { .name = "IMP_PERIPHREGIONR",
46
+ .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 0,
47
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
48
+ { .name = "IMP_FLASHIFREGIONR",
49
+ .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 1,
50
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
51
+ { .name = "IMP_BUILDOPTR",
52
+ .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0,
53
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
54
+ { .name = "IMP_PINOPTR",
55
+ .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7,
56
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
57
+ { .name = "IMP_QOSR",
58
+ .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 1,
59
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
60
+ { .name = "IMP_BUSTIMEOUTR",
61
+ .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 2,
62
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
63
+ { .name = "IMP_INTMONR",
64
+ .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 4,
65
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
66
+ { .name = "IMP_ICERR0",
67
+ .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 0,
68
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
69
+ { .name = "IMP_ICERR1",
70
+ .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 1,
71
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
72
+ { .name = "IMP_DCERR0",
73
+ .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 0,
74
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
75
+ { .name = "IMP_DCERR1",
76
+ .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 1,
77
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
78
+ { .name = "IMP_TCMERR0",
79
+ .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 0,
80
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
81
+ { .name = "IMP_TCMERR1",
82
+ .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 1,
83
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
84
+ { .name = "IMP_TCMSYNDR0",
85
+ .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 2,
86
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
87
+ { .name = "IMP_TCMSYNDR1",
88
+ .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 3,
89
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
90
+ { .name = "IMP_FLASHERR0",
91
+ .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 0,
92
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
93
+ { .name = "IMP_FLASHERR1",
94
+ .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 1,
95
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
96
+ { .name = "IMP_CDBGDR0",
97
+ .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 0,
98
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
99
+ { .name = "IMP_CBDGBR1",
100
+ .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 1,
101
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
102
+ { .name = "IMP_TESTR0",
103
+ .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 0,
104
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
105
+ { .name = "IMP_TESTR1",
106
+ .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 1,
107
+ .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 },
108
+ { .name = "IMP_CDBGDCI",
109
+ .cp = 15, .opc1 = 0, .crn = 15, .crm = 15, .opc2 = 0,
110
+ .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 },
111
+ { .name = "IMP_CDBGDCT",
112
+ .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 0,
113
+ .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 },
114
+ { .name = "IMP_CDBGICT",
115
+ .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 1,
116
+ .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 },
117
+ { .name = "IMP_CDBGDCD",
118
+ .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 0,
119
+ .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 },
120
+ { .name = "IMP_CDBGICD",
121
+ .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 1,
122
+ .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 },
123
+};
124
+
125
+
126
static void cortex_r52_initfn(Object *obj)
127
{
128
ARMCPU *cpu = ARM_CPU(obj);
129
@@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj)
130
set_feature(&cpu->env, ARM_FEATURE_NEON);
131
set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
132
set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
133
+ set_feature(&cpu->env, ARM_FEATURE_AUXCR);
134
cpu->midr = 0x411fd133; /* r1p3 */
135
cpu->revidr = 0x00000000;
136
cpu->reset_fpsid = 0x41034023;
137
@@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj)
138
139
cpu->pmsav7_dregion = 16;
140
cpu->pmsav8r_hdregion = 16;
141
+
142
+ define_arm_cp_regs(cpu, cortex_r52_cp_reginfo);
143
}
144
145
static void cortex_r5f_initfn(Object *obj)
146
--
147
2.34.1
diff view generated by jsdifflib
New patch
[PULL 26/35] target/arm: Allow access to SPSR_hyp from hyp mode
1
Architecturally, the AArch32 MSR/MRS to/from banked register
2
instructions are UNPREDICTABLE for attempts to access a banked
3
register that the guest could access in a more direct way (e.g.
4
using this insn to access r8_fiq when already in FIQ mode). QEMU has
5
chosen to UNDEF on all of these.
1
6
7
However, for the case of accessing SPSR_hyp from hyp mode, it turns
8
out that real hardware permits this, with the same effect as if the
9
guest had directly written to SPSR. Further, there is some
10
guest code out there that assumes it can do this, because it
11
happens to work on hardware: an example Cortex-R52 startup code
12
fragment uses this, and it got copied into various other places,
13
including Zephyr. Zephyr was fixed to not use this:
14
https://github.com/zephyrproject-rtos/zephyr/issues/47330
15
but other examples are still out there, like the selftest
16
binary for the MPS3-AN536.
17
18
For convenience of being able to run guest code, permit
19
this UNPREDICTABLE access instead of UNDEFing it.
20
21
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
23
Message-id: 20240206132931.38376-5-peter.maydell@linaro.org
24
---
25
target/arm/tcg/op_helper.c | 43 ++++++++++++++++++++++++++------------
26
target/arm/tcg/translate.c | 19 +++++++++++------
27
2 files changed, 43 insertions(+), 19 deletions(-)
28
29
diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c
30
index XXXXXXX..XXXXXXX 100644
31
--- a/target/arm/tcg/op_helper.c
32
+++ b/target/arm/tcg/op_helper.c
33
@@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode,
34
*/
35
int curmode = env->uncached_cpsr & CPSR_M;
36
37
- if (regno == 17) {
38
- /* ELR_Hyp: a special case because access from tgtmode is OK */
39
- if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) {
40
- goto undef;
41
+ if (tgtmode == ARM_CPU_MODE_HYP) {
42
+ /*
43
+ * Handle Hyp target regs first because some are special cases
44
+ * which don't want the usual "not accessible from tgtmode" check.
45
+ */
46
+ switch (regno) {
47
+ case 16 ... 17: /* ELR_Hyp, SPSR_Hyp */
48
+ if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) {
49
+ goto undef;
50
+ }
51
+ break;
52
+ case 13:
53
+ if (curmode != ARM_CPU_MODE_MON) {
54
+ goto undef;
55
+ }
56
+ break;
57
+ default:
58
+ g_assert_not_reached();
59
}
60
return;
61
}
62
@@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode,
63
}
64
}
65
66
- if (tgtmode == ARM_CPU_MODE_HYP) {
67
- /* SPSR_Hyp, r13_hyp: accessible from Monitor mode only */
68
- if (curmode != ARM_CPU_MODE_MON) {
69
- goto undef;
70
- }
71
- }
72
-
73
return;
74
75
undef:
76
@@ -XXX,XX +XXX,XX @@ void HELPER(msr_banked)(CPUARMState *env, uint32_t value, uint32_t tgtmode,
77
78
switch (regno) {
79
case 16: /* SPSRs */
80
- env->banked_spsr[bank_number(tgtmode)] = value;
81
+ if (tgtmode == (env->uncached_cpsr & CPSR_M)) {
82
+ /* Only happens for SPSR_Hyp access in Hyp mode */
83
+ env->spsr = value;
84
+ } else {
85
+ env->banked_spsr[bank_number(tgtmode)] = value;
86
+ }
87
break;
88
case 17: /* ELR_Hyp */
89
env->elr_el[2] = value;
90
@@ -XXX,XX +XXX,XX @@ uint32_t HELPER(mrs_banked)(CPUARMState *env, uint32_t tgtmode, uint32_t regno)
91
92
switch (regno) {
93
case 16: /* SPSRs */
94
- return env->banked_spsr[bank_number(tgtmode)];
95
+ if (tgtmode == (env->uncached_cpsr & CPSR_M)) {
96
+ /* Only happens for SPSR_Hyp access in Hyp mode */
97
+ return env->spsr;
98
+ } else {
99
+ return env->banked_spsr[bank_number(tgtmode)];
100
+ }
101
case 17: /* ELR_Hyp */
102
return env->elr_el[2];
103
case 13:
104
diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c
105
index XXXXXXX..XXXXXXX 100644
106
--- a/target/arm/tcg/translate.c
107
+++ b/target/arm/tcg/translate.c
108
@@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn,
109
break;
110
case ARM_CPU_MODE_HYP:
111
/*
112
- * SPSR_hyp and r13_hyp can only be accessed from Monitor mode
113
- * (and so we can forbid accesses from EL2 or below). elr_hyp
114
- * can be accessed also from Hyp mode, so forbid accesses from
115
- * EL0 or EL1.
116
+ * r13_hyp can only be accessed from Monitor mode, and so we
117
+ * can forbid accesses from EL2 or below.
118
+ * elr_hyp can be accessed also from Hyp mode, so forbid
119
+ * accesses from EL0 or EL1.
120
+ * SPSR_hyp is supposed to be in the same category as r13_hyp
121
+ * and UNPREDICTABLE if accessed from anything except Monitor
122
+ * mode. However there is some real-world code that will do
123
+ * it because at least some hardware happens to permit the
124
+ * access. (Notably a standard Cortex-R52 startup code fragment
125
+ * does this.) So we permit SPSR_hyp from Hyp mode also, to allow
126
+ * this (incorrect) guest code to run.
127
*/
128
- if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 ||
129
- (s->current_el < 3 && *regno != 17)) {
130
+ if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2
131
+ || (s->current_el < 3 && *regno != 16 && *regno != 17)) {
132
goto undef;
133
}
134
break;
135
--
136
2.34.1
diff view generated by jsdifflib
New patch
[PULL 27/35] hw/misc/mps2-scc: Fix condition for CFG3 register
1
We currently guard the CFG3 register read with
2
(scc_partno(s) == 0x524 && scc_partno(s) == 0x547)
3
which is clearly wrong as it is never true.
1
4
5
This register is present on all board types except AN524
6
and AN527; correct the condition.
7
8
Fixes: 6ac80818941829c0 ("hw/misc/mps2-scc: Implement changes for AN547")
9
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
10
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
11
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
12
Message-id: 20240206132931.38376-6-peter.maydell@linaro.org
13
---
14
hw/misc/mps2-scc.c | 2 +-
15
1 file changed, 1 insertion(+), 1 deletion(-)
16
17
diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c
18
index XXXXXXX..XXXXXXX 100644
19
--- a/hw/misc/mps2-scc.c
20
+++ b/hw/misc/mps2-scc.c
21
@@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size)
22
r = s->cfg2;
23
break;
24
case A_CFG3:
25
- if (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) {
26
+ if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) {
27
/* CFG3 reserved on AN524 */
28
goto bad_offset;
29
}
30
--
31
2.34.1
32
33
diff view generated by jsdifflib
New patch
[PULL 28/35] hw/misc/mps2-scc: Factor out which-board conditionals
1
The MPS SCC device has a lot of different flavours for the various
2
different MPS FPGA images, which look mostly similar but have
3
differences in how particular registers are handled. Currently we
4
deal with this with a lot of open-coded checks on scc_partno(), but
5
as we add more board types this is getting a bit hard to read.
1
6
7
Factor out the conditions into some functions which we can
8
give more descriptive names to.
9
10
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
11
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
12
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
13
Message-id: 20240206132931.38376-7-peter.maydell@linaro.org
14
---
15
hw/misc/mps2-scc.c | 45 +++++++++++++++++++++++++++++++--------------
16
1 file changed, 31 insertions(+), 14 deletions(-)
17
18
diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c
19
index XXXXXXX..XXXXXXX 100644
20
--- a/hw/misc/mps2-scc.c
21
+++ b/hw/misc/mps2-scc.c
22
@@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s)
23
return extract32(s->id, 4, 8);
24
}
25
26
+/* Is CFG_REG2 present? */
27
+static bool have_cfg2(MPS2SCC *s)
28
+{
29
+ return scc_partno(s) == 0x524 || scc_partno(s) == 0x547;
30
+}
31
+
32
+/* Is CFG_REG3 present? */
33
+static bool have_cfg3(MPS2SCC *s)
34
+{
35
+ return scc_partno(s) != 0x524 && scc_partno(s) != 0x547;
36
+}
37
+
38
+/* Is CFG_REG5 present? */
39
+static bool have_cfg5(MPS2SCC *s)
40
+{
41
+ return scc_partno(s) == 0x524 || scc_partno(s) == 0x547;
42
+}
43
+
44
+/* Is CFG_REG6 present? */
45
+static bool have_cfg6(MPS2SCC *s)
46
+{
47
+ return scc_partno(s) == 0x524;
48
+}
49
+
50
/* Handle a write via the SYS_CFG channel to the specified function/device.
51
* Return false on error (reported to guest via SYS_CFGCTRL ERROR bit).
52
*/
53
@@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size)
54
r = s->cfg1;
55
break;
56
case A_CFG2:
57
- if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) {
58
- /* CFG2 reserved on other boards */
59
+ if (!have_cfg2(s)) {
60
goto bad_offset;
61
}
62
r = s->cfg2;
63
break;
64
case A_CFG3:
65
- if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) {
66
- /* CFG3 reserved on AN524 */
67
+ if (!have_cfg3(s)) {
68
goto bad_offset;
69
}
70
/* These are user-settable DIP switches on the board. We don't
71
@@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size)
72
r = s->cfg4;
73
break;
74
case A_CFG5:
75
- if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) {
76
- /* CFG5 reserved on other boards */
77
+ if (!have_cfg5(s)) {
78
goto bad_offset;
79
}
80
r = s->cfg5;
81
break;
82
case A_CFG6:
83
- if (scc_partno(s) != 0x524) {
84
- /* CFG6 reserved on other boards */
85
+ if (!have_cfg6(s)) {
86
goto bad_offset;
87
}
88
r = s->cfg6;
89
@@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value,
90
}
91
break;
92
case A_CFG2:
93
- if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) {
94
- /* CFG2 reserved on other boards */
95
+ if (!have_cfg2(s)) {
96
goto bad_offset;
97
}
98
/* AN524: QSPI Select signal */
99
s->cfg2 = value;
100
break;
101
case A_CFG5:
102
- if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) {
103
- /* CFG5 reserved on other boards */
104
+ if (!have_cfg5(s)) {
105
goto bad_offset;
106
}
107
/* AN524: ACLK frequency in Hz */
108
s->cfg5 = value;
109
break;
110
case A_CFG6:
111
- if (scc_partno(s) != 0x524) {
112
- /* CFG6 reserved on other boards */
113
+ if (!have_cfg6(s)) {
114
goto bad_offset;
115
}
116
/* AN524: Clock divider for BRAM */
117
--
118
2.34.1
119
120
diff view generated by jsdifflib
New patch
[PULL 29/35] hw/misc/mps2-scc: Make changes needed for AN536 FPGA image
1
1
The MPS2 SCC device is broadly the same for all FPGA images, but has
2
minor differences in the behaviour of the CFG registers depending on
3
the image. In many cases we don't really care about the functionality
4
controlled by these registers and a reads-as-written or similar
5
behaviour is sufficient for the moment.
6
7
For the AN536 the required behaviour is:
8
9
* A_CFG0 has CPU reset and halt bits
10
- implement as reads-as-written for the moment
11
* A_CFG1 has flash or ATCM address 0 remap handling
12
- QEMU doesn't model this; implement as reads-as-written
13
* A_CFG2 has QSPI select (like AN524)
14
- implemented (no behaviour, as with AN524)
15
* A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits"
16
- QEMU doesn't care about these, so use the existing
17
RAZ behaviour for convenience
18
* A_CFG4 is board rev (like all other images)
19
- no change needed
20
* A_CFG5 is ACLK frq in hz (like AN524)
21
- implemented as reads-as-written, as for other boards
22
* A_CFG6 is core 0 vector table base address
23
- implemented as reads-as-written for the moment
24
* A_CFG7 is core 1 vector table base address
25
- implemented as reads-as-written for the moment
26
27
Make the changes necessary for this; leave TODO comments where
28
appropriate to indicate where we might want to come back and
29
implement things like CPU reset.
30
31
The other aspects of the device specific to this FPGA image (like the
32
values of the board ID and similar registers) will be set via the
33
device's qdev properties.
34
35
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
36
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
37
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
38
Message-id: 20240206132931.38376-8-peter.maydell@linaro.org
39
---
40
include/hw/misc/mps2-scc.h | 1 +
41
hw/misc/mps2-scc.c | 101 +++++++++++++++++++++++++++++++++----
42
2 files changed, 92 insertions(+), 10 deletions(-)
43
44
diff --git a/include/hw/misc/mps2-scc.h b/include/hw/misc/mps2-scc.h
45
index XXXXXXX..XXXXXXX 100644
46
--- a/include/hw/misc/mps2-scc.h
47
+++ b/include/hw/misc/mps2-scc.h
48
@@ -XXX,XX +XXX,XX @@ struct MPS2SCC {
49
uint32_t cfg4;
50
uint32_t cfg5;
51
uint32_t cfg6;
52
+ uint32_t cfg7;
53
uint32_t cfgdata_rtn;
54
uint32_t cfgdata_out;
55
uint32_t cfgctrl;
56
diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c
57
index XXXXXXX..XXXXXXX 100644
58
--- a/hw/misc/mps2-scc.c
59
+++ b/hw/misc/mps2-scc.c
60
@@ -XXX,XX +XXX,XX @@ REG32(CFG3, 0xc)
61
REG32(CFG4, 0x10)
62
REG32(CFG5, 0x14)
63
REG32(CFG6, 0x18)
64
+REG32(CFG7, 0x1c)
65
REG32(CFGDATA_RTN, 0xa0)
66
REG32(CFGDATA_OUT, 0xa4)
67
REG32(CFGCTRL, 0xa8)
68
@@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s)
69
/* Is CFG_REG2 present? */
70
static bool have_cfg2(MPS2SCC *s)
71
{
72
- return scc_partno(s) == 0x524 || scc_partno(s) == 0x547;
73
+ return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 ||
74
+ scc_partno(s) == 0x536;
75
}
76
77
/* Is CFG_REG3 present? */
78
static bool have_cfg3(MPS2SCC *s)
79
{
80
- return scc_partno(s) != 0x524 && scc_partno(s) != 0x547;
81
+ return scc_partno(s) != 0x524 && scc_partno(s) != 0x547 &&
82
+ scc_partno(s) != 0x536;
83
}
84
85
/* Is CFG_REG5 present? */
86
static bool have_cfg5(MPS2SCC *s)
87
{
88
- return scc_partno(s) == 0x524 || scc_partno(s) == 0x547;
89
+ return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 ||
90
+ scc_partno(s) == 0x536;
91
}
92
93
/* Is CFG_REG6 present? */
94
static bool have_cfg6(MPS2SCC *s)
95
{
96
- return scc_partno(s) == 0x524;
97
+ return scc_partno(s) == 0x524 || scc_partno(s) == 0x536;
98
+}
99
+
100
+/* Is CFG_REG7 present? */
101
+static bool have_cfg7(MPS2SCC *s)
102
+{
103
+ return scc_partno(s) == 0x536;
104
+}
105
+
106
+/* Does CFG_REG0 drive the 'remap' GPIO output? */
107
+static bool cfg0_is_remap(MPS2SCC *s)
108
+{
109
+ return scc_partno(s) != 0x536;
110
+}
111
+
112
+/* Is CFG_REG1 driving a set of LEDs? */
113
+static bool cfg1_is_leds(MPS2SCC *s)
114
+{
115
+ return scc_partno(s) != 0x536;
116
}
117
118
/* Handle a write via the SYS_CFG channel to the specified function/device.
119
@@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size)
120
if (!have_cfg3(s)) {
121
goto bad_offset;
122
}
123
- /* These are user-settable DIP switches on the board. We don't
124
+ /*
125
+ * These are user-settable DIP switches on the board. We don't
126
* model that, so just return zeroes.
127
+ *
128
+ * TODO: for AN536 this is MCC_MSB_ADDR "additional MCC addressing
129
+ * bits". These change which part of the DDR4 the motherboard
130
+ * configuration controller can see in its memory map (see the
131
+ * appnote section 2.4). QEMU doesn't model the MCC at all, so these
132
+ * bits are not interesting to us; read-as-zero is as good as anything
133
+ * else.
134
*/
135
r = 0;
136
break;
137
@@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size)
138
}
139
r = s->cfg6;
140
break;
141
+ case A_CFG7:
142
+ if (!have_cfg7(s)) {
143
+ goto bad_offset;
144
+ }
145
+ r = s->cfg7;
146
+ break;
147
case A_CFGDATA_RTN:
148
r = s->cfgdata_rtn;
149
break;
150
@@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value,
151
* we always reflect bit 0 in the 'remap' GPIO output line,
152
* and let the board wire it up or not as it chooses.
153
* TODO on some boards bit 1 is CPU_WAIT.
154
+ *
155
+ * TODO: on the AN536 this register controls reset and halt
156
+ * for both CPUs. For the moment we don't implement this, so the
157
+ * register just reads as written.
158
*/
159
s->cfg0 = value;
160
- qemu_set_irq(s->remap, s->cfg0 & 1);
161
+ if (cfg0_is_remap(s)) {
162
+ qemu_set_irq(s->remap, s->cfg0 & 1);
163
+ }
164
break;
165
case A_CFG1:
166
s->cfg1 = value;
167
- for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) {
168
- led_set_state(s->led[i], extract32(value, i, 1));
169
+ /*
170
+ * On most boards this register drives LEDs.
171
+ *
172
+ * TODO: for AN536 this controls whether flash and ATCM are
173
+ * enabled or disabled on reset. QEMU doesn't model this, and
174
+ * always wires up RAM in the ATCM area and ROM in the flash area.
175
+ */
176
+ if (cfg1_is_leds(s)) {
177
+ for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) {
178
+ led_set_state(s->led[i], extract32(value, i, 1));
179
+ }
180
}
181
break;
182
case A_CFG2:
183
if (!have_cfg2(s)) {
184
goto bad_offset;
185
}
186
- /* AN524: QSPI Select signal */
187
+ /* AN524, AN536: QSPI Select signal */
188
s->cfg2 = value;
189
break;
190
case A_CFG5:
191
if (!have_cfg5(s)) {
192
goto bad_offset;
193
}
194
- /* AN524: ACLK frequency in Hz */
195
+ /* AN524, AN536: ACLK frequency in Hz */
196
s->cfg5 = value;
197
break;
198
case A_CFG6:
199
@@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value,
200
goto bad_offset;
201
}
202
/* AN524: Clock divider for BRAM */
203
+ /* AN536: Core 0 vector table base address */
204
+ s->cfg6 = value;
205
+ break;
206
+ case A_CFG7:
207
+ if (!have_cfg7(s)) {
208
+ goto bad_offset;
209
+ }
210
+ /* AN536: Core 1 vector table base address */
211
s->cfg6 = value;
212
break;
213
case A_CFGDATA_OUT:
214
@@ -XXX,XX +XXX,XX @@ static void mps2_scc_finalize(Object *obj)
215
g_free(s->oscclk_reset);
216
}
217
218
+static bool cfg7_needed(void *opaque)
219
+{
220
+ MPS2SCC *s = opaque;
221
+
222
+ return have_cfg7(s);
223
+}
224
+
225
+static const VMStateDescription vmstate_cfg7 = {
226
+ .name = "mps2-scc/cfg7",
227
+ .version_id = 1,
228
+ .minimum_version_id = 1,
229
+ .needed = cfg7_needed,
230
+ .fields = (const VMStateField[]) {
231
+ VMSTATE_UINT32(cfg7, MPS2SCC),
232
+ VMSTATE_END_OF_LIST()
233
+ }
234
+};
235
+
236
static const VMStateDescription mps2_scc_vmstate = {
237
.name = "mps2-scc",
238
.version_id = 3,
239
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription mps2_scc_vmstate = {
240
VMSTATE_VARRAY_UINT32(oscclk, MPS2SCC, num_oscclk,
241
0, vmstate_info_uint32, uint32_t),
242
VMSTATE_END_OF_LIST()
243
+ },
244
+ .subsections = (const VMStateDescription * const []) {
245
+ &vmstate_cfg7,
246
+ NULL
247
}
248
};
249
250
--
251
2.34.1
252
253
diff view generated by jsdifflib
New patch
[PULL 30/35] hw/arm/mps3r: Initial skeleton for mps3-an536 board
1
1
The AN536 is another FPGA image for the MPS3 development board. Unlike
2
the existing FPGA images we already model, this board uses a Cortex-R
3
family CPU, and it does not use any equivalent to the M-profile
4
"Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c.
5
It's therefore more convenient for us to model it as a completely
6
separate C file.
7
8
This commit adds the basic skeleton of the board model, and the
9
code to create all the RAM and ROM. We assume that we're probably
10
going to want to add more images in future, so use the same
11
base class/subclass setup that mps2-tz.c uses, even though at
12
the moment there's only a single subclass.
13
14
Following commits will add the CPUs and the peripherals.
15
16
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
17
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
18
Message-id: 20240206132931.38376-9-peter.maydell@linaro.org
19
---
20
MAINTAINERS | 3 +-
21
configs/devices/arm-softmmu/default.mak | 1 +
22
hw/arm/mps3r.c | 239 ++++++++++++++++++++++++
23
hw/arm/Kconfig | 5 +
24
hw/arm/meson.build | 1 +
25
5 files changed, 248 insertions(+), 1 deletion(-)
26
create mode 100644 hw/arm/mps3r.c
27
28
diff --git a/MAINTAINERS b/MAINTAINERS
29
index XXXXXXX..XXXXXXX 100644
30
--- a/MAINTAINERS
31
+++ b/MAINTAINERS
32
@@ -XXX,XX +XXX,XX @@ F: include/hw/misc/imx7_*.h
33
F: hw/pci-host/designware.c
34
F: include/hw/pci-host/designware.h
35
36
-MPS2
37
+MPS2 / MPS3
38
M: Peter Maydell <peter.maydell@linaro.org>
39
L: qemu-arm@nongnu.org
40
S: Maintained
41
F: hw/arm/mps2.c
42
F: hw/arm/mps2-tz.c
43
+F: hw/arm/mps3r.c
44
F: hw/misc/mps2-*.c
45
F: include/hw/misc/mps2-*.h
46
F: hw/arm/armsse.c
47
diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak
48
index XXXXXXX..XXXXXXX 100644
49
--- a/configs/devices/arm-softmmu/default.mak
50
+++ b/configs/devices/arm-softmmu/default.mak
51
@@ -XXX,XX +XXX,XX @@ CONFIG_ARM_VIRT=y
52
# CONFIG_INTEGRATOR=n
53
# CONFIG_FSL_IMX31=n
54
# CONFIG_MUSICPAL=n
55
+# CONFIG_MPS3R=n
56
# CONFIG_MUSCA=n
57
# CONFIG_CHEETAH=n
58
# CONFIG_SX1=n
59
diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c
60
new file mode 100644
61
index XXXXXXX..XXXXXXX
62
--- /dev/null
63
+++ b/hw/arm/mps3r.c
64
@@ -XXX,XX +XXX,XX @@
65
+/*
66
+ * Arm MPS3 board emulation for Cortex-R-based FPGA images.
67
+ * (For M-profile images see mps2.c and mps2tz.c.)
68
+ *
69
+ * Copyright (c) 2017 Linaro Limited
70
+ * Written by Peter Maydell
71
+ *
72
+ * This program is free software; you can redistribute it and/or modify
73
+ * it under the terms of the GNU General Public License version 2 or
74
+ * (at your option) any later version.
75
+ */
76
+
77
+/*
78
+ * The MPS3 is an FPGA based dev board. This file handles FPGA images
79
+ * which use the Cortex-R CPUs. We model these separately from the
80
+ * M-profile images, because on M-profile the FPGA image is based on
81
+ * a "Subsystem for Embedded" which is similar to an SoC, whereas
82
+ * the R-profile FPGA images don't have that abstraction layer.
83
+ *
84
+ * We model the following FPGA images here:
85
+ * "mps3-an536" -- dual Cortex-R52 as documented in Arm Application Note AN536
86
+ *
87
+ * Application Note AN536:
88
+ * https://developer.arm.com/documentation/dai0536/latest/
89
+ */
90
+
91
+#include "qemu/osdep.h"
92
+#include "qemu/units.h"
93
+#include "qapi/error.h"
94
+#include "exec/address-spaces.h"
95
+#include "cpu.h"
96
+#include "hw/boards.h"
97
+#include "hw/arm/boot.h"
98
+
99
+/* Define the layout of RAM and ROM in a board */
100
+typedef struct RAMInfo {
101
+ const char *name;
102
+ hwaddr base;
103
+ hwaddr size;
104
+ int mrindex; /* index into rams[]; -1 for the system RAM block */
105
+ int flags;
106
+} RAMInfo;
107
+
108
+/*
109
+ * The MPS3 DDR is 3GiB, but on a 32-bit host QEMU doesn't permit
110
+ * emulation of that much guest RAM, so artificially make it smaller.
111
+ */
112
+#if HOST_LONG_BITS == 32
113
+#define MPS3_DDR_SIZE (1 * GiB)
114
+#else
115
+#define MPS3_DDR_SIZE (3 * GiB)
116
+#endif
117
+
118
+/*
119
+ * Flag values:
120
+ * IS_MAIN: this is the main machine RAM
121
+ * IS_ROM: this area is read-only
122
+ */
123
+#define IS_MAIN 1
124
+#define IS_ROM 2
125
+
126
+#define MPS3R_RAM_MAX 9
127
+
128
+typedef enum MPS3RFPGAType {
129
+ FPGA_AN536,
130
+} MPS3RFPGAType;
131
+
132
+struct MPS3RMachineClass {
133
+ MachineClass parent;
134
+ MPS3RFPGAType fpga_type;
135
+ const RAMInfo *raminfo;
136
+};
137
+
138
+struct MPS3RMachineState {
139
+ MachineState parent;
140
+ MemoryRegion ram[MPS3R_RAM_MAX];
141
+};
142
+
143
+#define TYPE_MPS3R_MACHINE "mps3r"
144
+#define TYPE_MPS3R_AN536_MACHINE MACHINE_TYPE_NAME("mps3-an536")
145
+
146
+OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE)
147
+
148
+static const RAMInfo an536_raminfo[] = {
149
+ {
150
+ .name = "ATCM",
151
+ .base = 0x00000000,
152
+ .size = 0x00008000,
153
+ .mrindex = 0,
154
+ }, {
155
+ /* We model the QSPI flash as simple ROM for now */
156
+ .name = "QSPI",
157
+ .base = 0x08000000,
158
+ .size = 0x00800000,
159
+ .flags = IS_ROM,
160
+ .mrindex = 1,
161
+ }, {
162
+ .name = "BRAM",
163
+ .base = 0x10000000,
164
+ .size = 0x00080000,
165
+ .mrindex = 2,
166
+ }, {
167
+ .name = "DDR",
168
+ .base = 0x20000000,
169
+ .size = MPS3_DDR_SIZE,
170
+ .mrindex = -1,
171
+ }, {
172
+ .name = "ATCM0",
173
+ .base = 0xee000000,
174
+ .size = 0x00008000,
175
+ .mrindex = 3,
176
+ }, {
177
+ .name = "BTCM0",
178
+ .base = 0xee100000,
179
+ .size = 0x00008000,
180
+ .mrindex = 4,
181
+ }, {
182
+ .name = "CTCM0",
183
+ .base = 0xee200000,
184
+ .size = 0x00008000,
185
+ .mrindex = 5,
186
+ }, {
187
+ .name = "ATCM1",
188
+ .base = 0xee400000,
189
+ .size = 0x00008000,
190
+ .mrindex = 6,
191
+ }, {
192
+ .name = "BTCM1",
193
+ .base = 0xee500000,
194
+ .size = 0x00008000,
195
+ .mrindex = 7,
196
+ }, {
197
+ .name = "CTCM1",
198
+ .base = 0xee600000,
199
+ .size = 0x00008000,
200
+ .mrindex = 8,
201
+ }, {
202
+ .name = NULL,
203
+ }
204
+};
205
+
206
+static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms,
207
+ const RAMInfo *raminfo)
208
+{
209
+ /* Return an initialized MemoryRegion for the RAMInfo. */
210
+ MemoryRegion *ram;
211
+
212
+ if (raminfo->mrindex < 0) {
213
+ /* Means this RAMInfo is for QEMU's "system memory" */
214
+ MachineState *machine = MACHINE(mms);
215
+ assert(!(raminfo->flags & IS_ROM));
216
+ return machine->ram;
217
+ }
218
+
219
+ assert(raminfo->mrindex < MPS3R_RAM_MAX);
220
+ ram = &mms->ram[raminfo->mrindex];
221
+
222
+ memory_region_init_ram(ram, NULL, raminfo->name,
223
+ raminfo->size, &error_fatal);
224
+ if (raminfo->flags & IS_ROM) {
225
+ memory_region_set_readonly(ram, true);
226
+ }
227
+ return ram;
228
+}
229
+
230
+static void mps3r_common_init(MachineState *machine)
231
+{
232
+ MPS3RMachineState *mms = MPS3R_MACHINE(machine);
233
+ MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms);
234
+ MemoryRegion *sysmem = get_system_memory();
235
+
236
+ for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) {
237
+ MemoryRegion *mr = mr_for_raminfo(mms, ri);
238
+ memory_region_add_subregion(sysmem, ri->base, mr);
239
+ }
240
+}
241
+
242
+static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc)
243
+{
244
+ /*
245
+ * Set mc->default_ram_size and default_ram_id from the
246
+ * information in mmc->raminfo.
247
+ */
248
+ MachineClass *mc = MACHINE_CLASS(mmc);
249
+ const RAMInfo *p;
250
+
251
+ for (p = mmc->raminfo; p->name; p++) {
252
+ if (p->mrindex < 0) {
253
+ /* Found the entry for "system memory" */
254
+ mc->default_ram_size = p->size;
255
+ mc->default_ram_id = p->name;
256
+ return;
257
+ }
258
+ }
259
+ g_assert_not_reached();
260
+}
261
+
262
+static void mps3r_class_init(ObjectClass *oc, void *data)
263
+{
264
+ MachineClass *mc = MACHINE_CLASS(oc);
265
+
266
+ mc->init = mps3r_common_init;
267
+}
268
+
269
+static void mps3r_an536_class_init(ObjectClass *oc, void *data)
270
+{
271
+ MachineClass *mc = MACHINE_CLASS(oc);
272
+ MPS3RMachineClass *mmc = MPS3R_MACHINE_CLASS(oc);
273
+ static const char * const valid_cpu_types[] = {
274
+ ARM_CPU_TYPE_NAME("cortex-r52"),
275
+ NULL
276
+ };
277
+
278
+ mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52";
279
+ mc->default_cpus = 2;
280
+ mc->min_cpus = mc->default_cpus;
281
+ mc->max_cpus = mc->default_cpus;
282
+ mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52");
283
+ mc->valid_cpu_types = valid_cpu_types;
284
+ mmc->raminfo = an536_raminfo;
285
+ mps3r_set_default_ram_info(mmc);
286
+}
287
+
288
+static const TypeInfo mps3r_machine_types[] = {
289
+ {
290
+ .name = TYPE_MPS3R_MACHINE,
291
+ .parent = TYPE_MACHINE,
292
+ .abstract = true,
293
+ .instance_size = sizeof(MPS3RMachineState),
294
+ .class_size = sizeof(MPS3RMachineClass),
295
+ .class_init = mps3r_class_init,
296
+ }, {
297
+ .name = TYPE_MPS3R_AN536_MACHINE,
298
+ .parent = TYPE_MPS3R_MACHINE,
299
+ .class_init = mps3r_an536_class_init,
300
+ },
301
+};
302
+
303
+DEFINE_TYPES(mps3r_machine_types);
304
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
305
index XXXXXXX..XXXXXXX 100644
306
--- a/hw/arm/Kconfig
307
+++ b/hw/arm/Kconfig
308
@@ -XXX,XX +XXX,XX @@ config MAINSTONE
309
select PFLASH_CFI01
310
select SMC91C111
311
312
+config MPS3R
313
+ bool
314
+ default y
315
+ depends on TCG && ARM
316
+
317
config MUSCA
318
bool
319
default y
320
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
321
index XXXXXXX..XXXXXXX 100644
322
--- a/hw/arm/meson.build
323
+++ b/hw/arm/meson.build
324
@@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_HIGHBANK', if_true: files('highbank.c'))
325
arm_ss.add(when: 'CONFIG_INTEGRATOR', if_true: files('integratorcp.c'))
326
arm_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mainstone.c'))
327
arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c'))
328
+arm_ss.add(when: 'CONFIG_MPS3R', if_true: files('mps3r.c'))
329
arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c'))
330
arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c'))
331
arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c'))
332
--
333
2.34.1
334
335
diff view generated by jsdifflib
New patch
[PULL 31/35] hw/arm/mps3r: Add CPUs, GIC, and per-CPU RAM
1
Create the CPUs, the GIC, and the per-CPU RAM block for
2
the mps3-an536 board.
1
3
4
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5
Message-id: 20240206132931.38376-10-peter.maydell@linaro.org
6
---
7
hw/arm/mps3r.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++++-
8
1 file changed, 177 insertions(+), 3 deletions(-)
9
10
diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c
11
index XXXXXXX..XXXXXXX 100644
12
--- a/hw/arm/mps3r.c
13
+++ b/hw/arm/mps3r.c
14
@@ -XXX,XX +XXX,XX @@
15
#include "qemu/osdep.h"
16
#include "qemu/units.h"
17
#include "qapi/error.h"
18
+#include "qapi/qmp/qlist.h"
19
#include "exec/address-spaces.h"
20
#include "cpu.h"
21
#include "hw/boards.h"
22
+#include "hw/qdev-properties.h"
23
#include "hw/arm/boot.h"
24
+#include "hw/arm/bsa.h"
25
+#include "hw/intc/arm_gicv3.h"
26
27
/* Define the layout of RAM and ROM in a board */
28
typedef struct RAMInfo {
29
@@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo {
30
#define IS_ROM 2
31
32
#define MPS3R_RAM_MAX 9
33
+#define MPS3R_CPU_MAX 2
34
+
35
+#define PERIPHBASE 0xf0000000
36
+#define NUM_SPIS 96
37
38
typedef enum MPS3RFPGAType {
39
FPGA_AN536,
40
@@ -XXX,XX +XXX,XX @@ struct MPS3RMachineClass {
41
MachineClass parent;
42
MPS3RFPGAType fpga_type;
43
const RAMInfo *raminfo;
44
+ hwaddr loader_start;
45
};
46
47
struct MPS3RMachineState {
48
MachineState parent;
49
+ struct arm_boot_info bootinfo;
50
MemoryRegion ram[MPS3R_RAM_MAX];
51
+ Object *cpu[MPS3R_CPU_MAX];
52
+ MemoryRegion cpu_sysmem[MPS3R_CPU_MAX];
53
+ MemoryRegion sysmem_alias[MPS3R_CPU_MAX];
54
+ MemoryRegion cpu_ram[MPS3R_CPU_MAX];
55
+ GICv3State gic;
56
};
57
58
#define TYPE_MPS3R_MACHINE "mps3r"
59
@@ -XXX,XX +XXX,XX @@ static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms,
60
return ram;
61
}
62
63
+/*
64
+ * There is no defined secondary boot protocol for Linux for the AN536,
65
+ * because real hardware has a restriction that atomic operations between
66
+ * the two CPUs do not function correctly, and so true SMP is not
67
+ * possible. Therefore for cases where the user is directly booting
68
+ * a kernel, we treat the system as essentially uniprocessor, and
69
+ * put the secondary CPU into power-off state (as if the user on the
70
+ * real hardware had configured the secondary to be halted via the
71
+ * SCC config registers).
72
+ *
73
+ * Note that the default secondary boot code would not work here anyway
74
+ * as it assumes a GICv2, and we have a GICv3.
75
+ */
76
+static void mps3r_write_secondary_boot(ARMCPU *cpu,
77
+ const struct arm_boot_info *info)
78
+{
79
+ /*
80
+ * Power the secondary CPU off. This means we don't need to write any
81
+ * boot code into guest memory. Note that the 'cpu' argument to this
82
+ * function is the primary CPU we passed to arm_load_kernel(), not
83
+ * the secondary. Loop around all the other CPUs, as the boot.c
84
+ * code does for the "disable secondaries if PSCI is enabled" case.
85
+ */
86
+ for (CPUState *cs = first_cpu; cs; cs = CPU_NEXT(cs)) {
87
+ if (cs != first_cpu) {
88
+ object_property_set_bool(OBJECT(cs), "start-powered-off", true,
89
+ &error_abort);
90
+ }
91
+ }
92
+}
93
+
94
+static void mps3r_secondary_cpu_reset(ARMCPU *cpu,
95
+ const struct arm_boot_info *info)
96
+{
97
+ /* We don't need to do anything here because the CPU will be off */
98
+}
99
+
100
+static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem)
101
+{
102
+ MachineState *machine = MACHINE(mms);
103
+ DeviceState *gicdev;
104
+ QList *redist_region_count;
105
+
106
+ object_initialize_child(OBJECT(mms), "gic", &mms->gic, TYPE_ARM_GICV3);
107
+ gicdev = DEVICE(&mms->gic);
108
+ qdev_prop_set_uint32(gicdev, "num-cpu", machine->smp.cpus);
109
+ qdev_prop_set_uint32(gicdev, "num-irq", NUM_SPIS + GIC_INTERNAL);
110
+ redist_region_count = qlist_new();
111
+ qlist_append_int(redist_region_count, machine->smp.cpus);
112
+ qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count);
113
+ object_property_set_link(OBJECT(&mms->gic), "sysmem",
114
+ OBJECT(sysmem), &error_fatal);
115
+ sysbus_realize(SYS_BUS_DEVICE(&mms->gic), &error_fatal);
116
+ sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 0, PERIPHBASE);
117
+ sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 1, PERIPHBASE + 0x100000);
118
+ /*
119
+ * Wire the outputs from each CPU's generic timer and the GICv3
120
+ * maintenance interrupt signal to the appropriate GIC PPI inputs,
121
+ * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs.
122
+ */
123
+ for (int i = 0; i < machine->smp.cpus; i++) {
124
+ DeviceState *cpudev = DEVICE(mms->cpu[i]);
125
+ SysBusDevice *gicsbd = SYS_BUS_DEVICE(&mms->gic);
126
+ int intidbase = NUM_SPIS + i * GIC_INTERNAL;
127
+ int irq;
128
+ /*
129
+ * Mapping from the output timer irq lines from the CPU to the
130
+ * GIC PPI inputs used for this board. This isn't a BSA board,
131
+ * but it uses the standard convention for the PPI numbers.
132
+ */
133
+ const int timer_irq[] = {
134
+ [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
135
+ [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
136
+ [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ,
137
+ };
138
+
139
+ for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
140
+ qdev_connect_gpio_out(cpudev, irq,
141
+ qdev_get_gpio_in(gicdev,
142
+ intidbase + timer_irq[irq]));
143
+ }
144
+
145
+ qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0,
146
+ qdev_get_gpio_in(gicdev,
147
+ intidbase + ARCH_GIC_MAINT_IRQ));
148
+
149
+ qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
150
+ qdev_get_gpio_in(gicdev,
151
+ intidbase + VIRTUAL_PMU_IRQ));
152
+
153
+ sysbus_connect_irq(gicsbd, i,
154
+ qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
155
+ sysbus_connect_irq(gicsbd, i + machine->smp.cpus,
156
+ qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
157
+ sysbus_connect_irq(gicsbd, i + 2 * machine->smp.cpus,
158
+ qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
159
+ sysbus_connect_irq(gicsbd, i + 3 * machine->smp.cpus,
160
+ qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
161
+ }
162
+}
163
+
164
static void mps3r_common_init(MachineState *machine)
165
{
166
MPS3RMachineState *mms = MPS3R_MACHINE(machine);
167
@@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine)
168
MemoryRegion *mr = mr_for_raminfo(mms, ri);
169
memory_region_add_subregion(sysmem, ri->base, mr);
170
}
171
+
172
+ assert(machine->smp.cpus <= MPS3R_CPU_MAX);
173
+ for (int i = 0; i < machine->smp.cpus; i++) {
174
+ g_autofree char *sysmem_name = g_strdup_printf("cpu-%d-memory", i);
175
+ g_autofree char *ramname = g_strdup_printf("cpu-%d-memory", i);
176
+ g_autofree char *alias_name = g_strdup_printf("sysmem-alias-%d", i);
177
+
178
+ /*
179
+ * Each CPU has some private RAM/peripherals, so create the container
180
+ * which will house those, with the whole-machine system memory being
181
+ * used where there's no CPU-specific device. Note that we need the
182
+ * sysmem_alias aliases because we can't put one MR (the original
183
+ * 'sysmem') into more than one other MR.
184
+ */
185
+ memory_region_init(&mms->cpu_sysmem[i], OBJECT(machine),
186
+ sysmem_name, UINT64_MAX);
187
+ memory_region_init_alias(&mms->sysmem_alias[i], OBJECT(machine),
188
+ alias_name, sysmem, 0, UINT64_MAX);
189
+ memory_region_add_subregion_overlap(&mms->cpu_sysmem[i], 0,
190
+ &mms->sysmem_alias[i], -1);
191
+
192
+ mms->cpu[i] = object_new(machine->cpu_type);
193
+ object_property_set_link(mms->cpu[i], "memory",
194
+ OBJECT(&mms->cpu_sysmem[i]), &error_abort);
195
+ object_property_set_int(mms->cpu[i], "reset-cbar",
196
+ PERIPHBASE, &error_abort);
197
+ qdev_realize(DEVICE(mms->cpu[i]), NULL, &error_fatal);
198
+ object_unref(mms->cpu[i]);
199
+
200
+ /* Per-CPU RAM */
201
+ memory_region_init_ram(&mms->cpu_ram[i], NULL, ramname,
202
+ 0x1000, &error_fatal);
203
+ memory_region_add_subregion(&mms->cpu_sysmem[i], 0xe7c01000,
204
+ &mms->cpu_ram[i]);
205
+ }
206
+
207
+ create_gic(mms, sysmem);
208
+
209
+ mms->bootinfo.ram_size = machine->ram_size;
210
+ mms->bootinfo.board_id = -1;
211
+ mms->bootinfo.loader_start = mmc->loader_start;
212
+ mms->bootinfo.write_secondary_boot = mps3r_write_secondary_boot;
213
+ mms->bootinfo.secondary_cpu_reset_hook = mps3r_secondary_cpu_reset;
214
+ arm_load_kernel(ARM_CPU(mms->cpu[0]), machine, &mms->bootinfo);
215
}
216
217
static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc)
218
@@ -XXX,XX +XXX,XX @@ static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc)
219
/* Found the entry for "system memory" */
220
mc->default_ram_size = p->size;
221
mc->default_ram_id = p->name;
222
+ mmc->loader_start = p->base;
223
return;
224
}
225
}
226
@@ -XXX,XX +XXX,XX @@ static void mps3r_an536_class_init(ObjectClass *oc, void *data)
227
};
228
229
mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52";
230
- mc->default_cpus = 2;
231
- mc->min_cpus = mc->default_cpus;
232
- mc->max_cpus = mc->default_cpus;
233
+ /*
234
+ * In the real FPGA image there are always two cores, but the standard
235
+ * initial setting for the SCC SYSCON 0x000 register is 0x21, meaning
236
+ * that the second core is held in reset and halted. Many images built for
237
+ * the board do not expect the second core to run at startup (especially
238
+ * since on the real FPGA image it is not possible to use LDREX/STREX
239
+ * in RAM between the two cores, so a true SMP setup isn't supported).
240
+ *
241
+ * As QEMU's equivalent of this, we support both -smp 1 and -smp 2,
242
+ * with the default being -smp 1. This seems a more intuitive UI for
243
+ * QEMU users than, for instance, having a machine property to allow
244
+ * the user to set the initial value of the SYSCON 0x000 register.
245
+ */
246
+ mc->default_cpus = 1;
247
+ mc->min_cpus = 1;
248
+ mc->max_cpus = 2;
249
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52");
250
mc->valid_cpu_types = valid_cpu_types;
251
mmc->raminfo = an536_raminfo;
252
--
253
2.34.1
diff view generated by jsdifflib
[Qemu-devel] [PULL 01/12] target-arm: Add support for PMU register PMSELR_EL0
[PULL 32/35] hw/arm/mps3r: Add UARTs
1
From: Wei Huang <wei@redhat.com>
1
This board has a lot of UARTs: there is one UART per CPU in the
2
per-CPU peripheral part of the address map, whose interrupts are
3
connected as per-CPU interrupt lines. Then there are 4 UARTs in the
4
normal part of the peripheral space, whose interrupts are shared
5
peripheral interrupts.
2
6
3
This patch adds support for AArch64 register PMSELR_EL0. The existing
7
Connect and wire them all up; this involves some OR gates where
4
PMSELR definition is revised accordingly.
8
multiple overflow interrupts are wired into one GIC input.
5
9
6
Signed-off-by: Wei Huang <wei@redhat.com>
7
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
8
[PMM: Moved #ifndef CONFIG_USER_ONLY to cover new regdefs]
9
Message-id: 1486504171-26807-2-git-send-email-wei@redhat.com
10
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
10
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
11
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
12
Message-id: 20240206132931.38376-11-peter.maydell@linaro.org
11
---
13
---
12
target/arm/cpu.h | 1 +
14
hw/arm/mps3r.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++
13
target/arm/helper.c | 27 +++++++++++++++++++++------
15
1 file changed, 94 insertions(+)
14
2 files changed, 22 insertions(+), 6 deletions(-)
15
16
16
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
17
diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c
17
index XXXXXXX..XXXXXXX 100644
18
index XXXXXXX..XXXXXXX 100644
18
--- a/target/arm/cpu.h
19
--- a/hw/arm/mps3r.c
19
+++ b/target/arm/cpu.h
20
+++ b/hw/arm/mps3r.c
20
@@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState {
21
@@ -XXX,XX +XXX,XX @@
21
uint32_t c9_pmovsr; /* perf monitor overflow status */
22
#include "qapi/qmp/qlist.h"
22
uint32_t c9_pmxevtyper; /* perf monitor event type */
23
#include "exec/address-spaces.h"
23
uint32_t c9_pmuserenr; /* perf monitor user enable */
24
#include "cpu.h"
24
+ uint64_t c9_pmselr; /* perf monitor counter selection register */
25
+#include "sysemu/sysemu.h"
25
uint32_t c9_pminten; /* perf monitor interrupt enables */
26
#include "hw/boards.h"
26
union { /* Memory attribute redirection */
27
+#include "hw/or-irq.h"
27
struct {
28
#include "hw/qdev-properties.h"
28
diff --git a/target/arm/helper.c b/target/arm/helper.c
29
#include "hw/arm/boot.h"
29
index XXXXXXX..XXXXXXX 100644
30
#include "hw/arm/bsa.h"
30
--- a/target/arm/helper.c
31
+#include "hw/char/cmsdk-apb-uart.h"
31
+++ b/target/arm/helper.c
32
#include "hw/intc/arm_gicv3.h"
32
@@ -XXX,XX +XXX,XX @@ static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
33
33
return total_ticks - env->cp15.c15_ccnt;
34
/* Define the layout of RAM and ROM in a board */
35
@@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo {
36
37
#define MPS3R_RAM_MAX 9
38
#define MPS3R_CPU_MAX 2
39
+#define MPS3R_UART_MAX 4 /* shared UART count */
40
41
#define PERIPHBASE 0xf0000000
42
#define NUM_SPIS 96
43
@@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState {
44
MemoryRegion sysmem_alias[MPS3R_CPU_MAX];
45
MemoryRegion cpu_ram[MPS3R_CPU_MAX];
46
GICv3State gic;
47
+ /* per-CPU UARTs followed by the shared UARTs */
48
+ CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX];
49
+ OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX];
50
+ OrIRQState uart_oflow;
51
};
52
53
#define TYPE_MPS3R_MACHINE "mps3r"
54
@@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState {
55
56
OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE)
57
58
+/*
59
+ * Main clock frequency CLK in Hz (50MHz). In the image there are also
60
+ * ACLK, MCLK, GPUCLK and PERIPHCLK at the same frequency; for our
61
+ * model we just roll them all into one.
62
+ */
63
+#define CLK_FRQ 50000000
64
+
65
static const RAMInfo an536_raminfo[] = {
66
{
67
.name = "ATCM",
68
@@ -XXX,XX +XXX,XX @@ static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem)
69
}
34
}
70
}
35
71
36
+static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
72
+/*
37
+ uint64_t value)
73
+ * Create UART uartno, and map it into the MemoryRegion mem at address baseaddr.
74
+ * The qemu_irq arguments are where we connect the various IRQs from the UART.
75
+ */
76
+static void create_uart(MPS3RMachineState *mms, int uartno, MemoryRegion *mem,
77
+ hwaddr baseaddr, qemu_irq txirq, qemu_irq rxirq,
78
+ qemu_irq txoverirq, qemu_irq rxoverirq,
79
+ qemu_irq combirq)
38
+{
80
+{
39
+ /* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and
81
+ g_autofree char *s = g_strdup_printf("uart%d", uartno);
40
+ * PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the
82
+ SysBusDevice *sbd;
41
+ * meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are
83
+
42
+ * accessed.
84
+ assert(uartno < ARRAY_SIZE(mms->uart));
43
+ */
85
+ object_initialize_child(OBJECT(mms), s, &mms->uart[uartno],
44
+ env->cp15.c9_pmselr = value & 0x1f;
86
+ TYPE_CMSDK_APB_UART);
87
+ qdev_prop_set_uint32(DEVICE(&mms->uart[uartno]), "pclk-frq", CLK_FRQ);
88
+ qdev_prop_set_chr(DEVICE(&mms->uart[uartno]), "chardev", serial_hd(uartno));
89
+ sbd = SYS_BUS_DEVICE(&mms->uart[uartno]);
90
+ sysbus_realize(sbd, &error_fatal);
91
+ memory_region_add_subregion(mem, baseaddr,
92
+ sysbus_mmio_get_region(sbd, 0));
93
+ sysbus_connect_irq(sbd, 0, txirq);
94
+ sysbus_connect_irq(sbd, 1, rxirq);
95
+ sysbus_connect_irq(sbd, 2, txoverirq);
96
+ sysbus_connect_irq(sbd, 3, rxoverirq);
97
+ sysbus_connect_irq(sbd, 4, combirq);
45
+}
98
+}
46
+
99
+
47
static void pmccntr_write(CPUARMState *env, const ARMCPRegInfo *ri,
100
static void mps3r_common_init(MachineState *machine)
48
uint64_t value)
49
{
101
{
50
@@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
102
MPS3RMachineState *mms = MPS3R_MACHINE(machine);
51
/* Unimplemented so WI. */
103
MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms);
52
{ .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
104
MemoryRegion *sysmem = get_system_memory();
53
.access = PL0_W, .accessfn = pmreg_access, .type = ARM_CP_NOP },
105
+ DeviceState *gicdev;
54
- /* Since we don't implement any events, writing to PMSELR is UNPREDICTABLE.
106
55
- * We choose to RAZ/WI.
107
for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) {
56
- */
108
MemoryRegion *mr = mr_for_raminfo(mms, ri);
57
- { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
109
@@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine)
58
- .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
110
}
59
- .accessfn = pmreg_access },
111
60
#ifndef CONFIG_USER_ONLY
112
create_gic(mms, sysmem);
61
+ { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
113
+ gicdev = DEVICE(&mms->gic);
62
+ .access = PL0_RW, .type = ARM_CP_ALIAS,
114
+
63
+ .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
115
+ /*
64
+ .accessfn = pmreg_access, .writefn = pmselr_write,
116
+ * UARTs 0 and 1 are per-CPU; their interrupts are wired to
65
+ .raw_writefn = raw_write},
117
+ * the relevant CPU's PPI 0..3, aka INTID 16..19
66
+ { .name = "PMSELR_EL0", .state = ARM_CP_STATE_AA64,
118
+ */
67
+ .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 5,
119
+ for (int i = 0; i < machine->smp.cpus; i++) {
68
+ .access = PL0_RW, .accessfn = pmreg_access,
120
+ int intidbase = NUM_SPIS + i * GIC_INTERNAL;
69
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pmselr),
121
+ g_autofree char *s = g_strdup_printf("cpu-uart-oflow-orgate%d", i);
70
+ .writefn = pmselr_write, .raw_writefn = raw_write, },
122
+ DeviceState *orgate;
71
{ .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0,
123
+
72
.access = PL0_RW, .resetvalue = 0, .type = ARM_CP_IO,
124
+ /* The two overflow IRQs from the UART are ORed together into PPI 3 */
73
.readfn = pmccntr_read, .writefn = pmccntr_write32,
125
+ object_initialize_child(OBJECT(mms), s, &mms->cpu_uart_oflow[i],
126
+ TYPE_OR_IRQ);
127
+ orgate = DEVICE(&mms->cpu_uart_oflow[i]);
128
+ qdev_prop_set_uint32(orgate, "num-lines", 2);
129
+ qdev_realize(orgate, NULL, &error_fatal);
130
+ qdev_connect_gpio_out(orgate, 0,
131
+ qdev_get_gpio_in(gicdev, intidbase + 19));
132
+
133
+ create_uart(mms, i, &mms->cpu_sysmem[i], 0xe7c00000,
134
+ qdev_get_gpio_in(gicdev, intidbase + 17), /* tx */
135
+ qdev_get_gpio_in(gicdev, intidbase + 16), /* rx */
136
+ qdev_get_gpio_in(orgate, 0), /* txover */
137
+ qdev_get_gpio_in(orgate, 1), /* rxover */
138
+ qdev_get_gpio_in(gicdev, intidbase + 18) /* combined */);
139
+ }
140
+ /*
141
+ * UARTs 2 to 5 are whole-system; all overflow IRQs are ORed
142
+ * together into IRQ 17
143
+ */
144
+ object_initialize_child(OBJECT(mms), "uart-oflow-orgate",
145
+ &mms->uart_oflow, TYPE_OR_IRQ);
146
+ qdev_prop_set_uint32(DEVICE(&mms->uart_oflow), "num-lines",
147
+ MPS3R_UART_MAX * 2);
148
+ qdev_realize(DEVICE(&mms->uart_oflow), NULL, &error_fatal);
149
+ qdev_connect_gpio_out(DEVICE(&mms->uart_oflow), 0,
150
+ qdev_get_gpio_in(gicdev, 17));
151
+
152
+ for (int i = 0; i < MPS3R_UART_MAX; i++) {
153
+ hwaddr baseaddr = 0xe0205000 + i * 0x1000;
154
+ int rxirq = 5 + i * 2, txirq = 6 + i * 2, combirq = 13 + i;
155
+
156
+ create_uart(mms, i + MPS3R_CPU_MAX, sysmem, baseaddr,
157
+ qdev_get_gpio_in(gicdev, txirq),
158
+ qdev_get_gpio_in(gicdev, rxirq),
159
+ qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2),
160
+ qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2 + 1),
161
+ qdev_get_gpio_in(gicdev, combirq));
162
+ }
163
164
mms->bootinfo.ram_size = machine->ram_size;
165
mms->bootinfo.board_id = -1;
74
--
166
--
75
2.7.4
167
2.34.1
76
168
77
169
diff view generated by jsdifflib
[Qemu-devel] [PULL 12/12] aspeed/smc: use a modulo to check segment limits
[PULL 33/35] hw/arm/mps3r: Add GPIO, watchdog, dual-timer, I2C devices
1
From: Cédric Le Goater <clg@kaod.org>
1
Add the GPIO, watchdog, dual-timer and I2C devices to the mps3-an536
2
board. These are all simple devices that just need to be created and
3
wired up.
2
4
3
The size of a segment is not necessarily a power of 2.
5
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
6
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
7
Message-id: 20240206132931.38376-12-peter.maydell@linaro.org
8
---
9
hw/arm/mps3r.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++
10
1 file changed, 59 insertions(+)
4
11
5
Signed-off-by: Cédric Le Goater <clg@kaod.org>
12
diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c
6
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
7
Message-id: 1486648058-520-5-git-send-email-clg@kaod.org
8
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
9
---
10
hw/ssi/aspeed_smc.c | 4 ++--
11
1 file changed, 2 insertions(+), 2 deletions(-)
12
13
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
14
index XXXXXXX..XXXXXXX 100644
13
index XXXXXXX..XXXXXXX 100644
15
--- a/hw/ssi/aspeed_smc.c
14
--- a/hw/arm/mps3r.c
16
+++ b/hw/ssi/aspeed_smc.c
15
+++ b/hw/arm/mps3r.c
17
@@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl,
16
@@ -XXX,XX +XXX,XX @@
18
AspeedSegments seg;
17
#include "sysemu/sysemu.h"
19
18
#include "hw/boards.h"
20
aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + fl->id], &seg);
19
#include "hw/or-irq.h"
21
- if ((addr & (seg.size - 1)) != addr) {
20
+#include "hw/qdev-clock.h"
22
+ if ((addr % seg.size) != addr) {
21
#include "hw/qdev-properties.h"
23
qemu_log_mask(LOG_GUEST_ERROR,
22
#include "hw/arm/boot.h"
24
"%s: invalid address 0x%08x for CS%d segment : "
23
#include "hw/arm/bsa.h"
25
"[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
24
#include "hw/char/cmsdk-apb-uart.h"
26
s->ctrl->name, addr, fl->id, seg.addr,
25
+#include "hw/i2c/arm_sbcon_i2c.h"
27
seg.addr + seg.size);
26
#include "hw/intc/arm_gicv3.h"
28
+ addr %= seg.size;
27
+#include "hw/misc/unimp.h"
28
+#include "hw/timer/cmsdk-apb-dualtimer.h"
29
+#include "hw/watchdog/cmsdk-apb-watchdog.h"
30
31
/* Define the layout of RAM and ROM in a board */
32
typedef struct RAMInfo {
33
@@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState {
34
CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX];
35
OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX];
36
OrIRQState uart_oflow;
37
+ CMSDKAPBWatchdog watchdog;
38
+ CMSDKAPBDualTimer dualtimer;
39
+ ArmSbconI2CState i2c[5];
40
+ Clock *clk;
41
};
42
43
#define TYPE_MPS3R_MACHINE "mps3r"
44
@@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine)
45
MemoryRegion *sysmem = get_system_memory();
46
DeviceState *gicdev;
47
48
+ mms->clk = clock_new(OBJECT(machine), "CLK");
49
+ clock_set_hz(mms->clk, CLK_FRQ);
50
+
51
for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) {
52
MemoryRegion *mr = mr_for_raminfo(mms, ri);
53
memory_region_add_subregion(sysmem, ri->base, mr);
54
@@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine)
55
qdev_get_gpio_in(gicdev, combirq));
29
}
56
}
30
57
31
- addr &= seg.size - 1;
58
+ for (int i = 0; i < 4; i++) {
32
return addr;
59
+ /* CMSDK GPIO controllers */
33
}
60
+ g_autofree char *s = g_strdup_printf("gpio%d", i);
34
61
+ create_unimplemented_device(s, 0xe0000000 + i * 0x1000, 0x1000);
62
+ }
63
+
64
+ object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog,
65
+ TYPE_CMSDK_APB_WATCHDOG);
66
+ qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->clk);
67
+ sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal);
68
+ sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0,
69
+ qdev_get_gpio_in(gicdev, 0));
70
+ sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0xe0100000);
71
+
72
+ object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer,
73
+ TYPE_CMSDK_APB_DUALTIMER);
74
+ qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->clk);
75
+ sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal);
76
+ sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0,
77
+ qdev_get_gpio_in(gicdev, 3));
78
+ sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 1,
79
+ qdev_get_gpio_in(gicdev, 1));
80
+ sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 2,
81
+ qdev_get_gpio_in(gicdev, 2));
82
+ sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0xe0101000);
83
+
84
+ for (int i = 0; i < ARRAY_SIZE(mms->i2c); i++) {
85
+ static const hwaddr i2cbase[] = {0xe0102000, /* Touch */
86
+ 0xe0103000, /* Audio */
87
+ 0xe0107000, /* Shield0 */
88
+ 0xe0108000, /* Shield1 */
89
+ 0xe0109000}; /* DDR4 EEPROM */
90
+ g_autofree char *s = g_strdup_printf("i2c%d", i);
91
+
92
+ object_initialize_child(OBJECT(mms), s, &mms->i2c[i],
93
+ TYPE_ARM_SBCON_I2C);
94
+ sysbus_realize(SYS_BUS_DEVICE(&mms->i2c[i]), &error_fatal);
95
+ sysbus_mmio_map(SYS_BUS_DEVICE(&mms->i2c[i]), 0, i2cbase[i]);
96
+ if (i != 2 && i != 3) {
97
+ /*
98
+ * internal-only bus: mark it full to avoid user-created
99
+ * i2c devices being plugged into it.
100
+ */
101
+ qbus_mark_full(qdev_get_child_bus(DEVICE(&mms->i2c[i]), "i2c"));
102
+ }
103
+ }
104
+
105
mms->bootinfo.ram_size = machine->ram_size;
106
mms->bootinfo.board_id = -1;
107
mms->bootinfo.loader_start = mmc->loader_start;
35
--
108
--
36
2.7.4
109
2.34.1
37
110
38
111
diff view generated by jsdifflib
New patch
[PULL 34/35] hw/arm/mps3r: Add remaining devices
1
Add the remaining devices (or unimplemented-device stubs) for
2
this board: SPI controllers, SCC, FPGAIO, I2S, RTC, the
3
QSPI write-config block, and ethernet.
1
4
5
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
6
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
7
Message-id: 20240206132931.38376-13-peter.maydell@linaro.org
8
---
9
hw/arm/mps3r.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++
10
1 file changed, 74 insertions(+)
11
12
diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c
13
index XXXXXXX..XXXXXXX 100644
14
--- a/hw/arm/mps3r.c
15
+++ b/hw/arm/mps3r.c
16
@@ -XXX,XX +XXX,XX @@
17
#include "hw/char/cmsdk-apb-uart.h"
18
#include "hw/i2c/arm_sbcon_i2c.h"
19
#include "hw/intc/arm_gicv3.h"
20
+#include "hw/misc/mps2-scc.h"
21
+#include "hw/misc/mps2-fpgaio.h"
22
#include "hw/misc/unimp.h"
23
+#include "hw/net/lan9118.h"
24
+#include "hw/rtc/pl031.h"
25
+#include "hw/ssi/pl022.h"
26
#include "hw/timer/cmsdk-apb-dualtimer.h"
27
#include "hw/watchdog/cmsdk-apb-watchdog.h"
28
29
@@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState {
30
CMSDKAPBWatchdog watchdog;
31
CMSDKAPBDualTimer dualtimer;
32
ArmSbconI2CState i2c[5];
33
+ PL022State spi[3];
34
+ MPS2SCC scc;
35
+ MPS2FPGAIO fpgaio;
36
+ UnimplementedDeviceState i2s_audio;
37
+ PL031State rtc;
38
Clock *clk;
39
};
40
41
@@ -XXX,XX +XXX,XX @@ static const RAMInfo an536_raminfo[] = {
42
}
43
};
44
45
+static const int an536_oscclk[] = {
46
+ 24000000, /* 24MHz reference for RTC and timers */
47
+ 50000000, /* 50MHz ACLK */
48
+ 50000000, /* 50MHz MCLK */
49
+ 50000000, /* 50MHz GPUCLK */
50
+ 24576000, /* 24.576MHz AUDCLK */
51
+ 23750000, /* 23.75MHz HDLCDCLK */
52
+ 100000000, /* 100MHz DDR4_REF_CLK */
53
+};
54
+
55
static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms,
56
const RAMInfo *raminfo)
57
{
58
@@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine)
59
MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms);
60
MemoryRegion *sysmem = get_system_memory();
61
DeviceState *gicdev;
62
+ QList *oscclk;
63
64
mms->clk = clock_new(OBJECT(machine), "CLK");
65
clock_set_hz(mms->clk, CLK_FRQ);
66
@@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine)
67
}
68
}
69
70
+ for (int i = 0; i < ARRAY_SIZE(mms->spi); i++) {
71
+ g_autofree char *s = g_strdup_printf("spi%d", i);
72
+ hwaddr baseaddr = 0xe0104000 + i * 0x1000;
73
+
74
+ object_initialize_child(OBJECT(mms), s, &mms->spi[i], TYPE_PL022);
75
+ sysbus_realize(SYS_BUS_DEVICE(&mms->spi[i]), &error_fatal);
76
+ sysbus_mmio_map(SYS_BUS_DEVICE(&mms->spi[i]), 0, baseaddr);
77
+ sysbus_connect_irq(SYS_BUS_DEVICE(&mms->spi[i]), 0,
78
+ qdev_get_gpio_in(gicdev, 22 + i));
79
+ }
80
+
81
+ object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC);
82
+ qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg0", 0);
83
+ qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg4", 0x2);
84
+ qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-aid", 0x00200008);
85
+ qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-id", 0x41055360);
86
+ oscclk = qlist_new();
87
+ for (int i = 0; i < ARRAY_SIZE(an536_oscclk); i++) {
88
+ qlist_append_int(oscclk, an536_oscclk[i]);
89
+ }
90
+ qdev_prop_set_array(DEVICE(&mms->scc), "oscclk", oscclk);
91
+ sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal);
92
+ sysbus_mmio_map(SYS_BUS_DEVICE(&mms->scc), 0, 0xe0200000);
93
+
94
+ create_unimplemented_device("i2s-audio", 0xe0201000, 0x1000);
95
+
96
+ object_initialize_child(OBJECT(mms), "fpgaio", &mms->fpgaio,
97
+ TYPE_MPS2_FPGAIO);
98
+ qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", an536_oscclk[1]);
99
+ qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "num-leds", 10);
100
+ qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-switches", true);
101
+ qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-dbgctrl", false);
102
+ sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal);
103
+ sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0xe0202000);
104
+
105
+ create_unimplemented_device("clcd", 0xe0209000, 0x1000);
106
+
107
+ object_initialize_child(OBJECT(mms), "rtc", &mms->rtc, TYPE_PL031);
108
+ sysbus_realize(SYS_BUS_DEVICE(&mms->rtc), &error_fatal);
109
+ sysbus_mmio_map(SYS_BUS_DEVICE(&mms->rtc), 0, 0xe020a000);
110
+ sysbus_connect_irq(SYS_BUS_DEVICE(&mms->rtc), 0,
111
+ qdev_get_gpio_in(gicdev, 4));
112
+
113
+ /*
114
+ * In hardware this is a LAN9220; the LAN9118 is software compatible
115
+ * except that it doesn't support the checksum-offload feature.
116
+ */
117
+ lan9118_init(0xe0300000,
118
+ qdev_get_gpio_in(gicdev, 18));
119
+
120
+ create_unimplemented_device("usb", 0xe0301000, 0x1000);
121
+ create_unimplemented_device("qspi-write-config", 0xe0600000, 0x1000);
122
+
123
mms->bootinfo.ram_size = machine->ram_size;
124
mms->bootinfo.board_id = -1;
125
mms->bootinfo.loader_start = mmc->loader_start;
126
--
127
2.34.1
128
129
diff view generated by jsdifflib
[Qemu-devel] [PULL 06/12] hw/arm/virt: Declare virtio-mmio as dma cache coherent in ACPI
[PULL 35/35] docs: Add documentation for the mps3-an536 board
1
From: Alexander Graf <agraf@suse.de>
1
Add documentation for the mps3-an536 board type.
2
2
3
Virtio-mmio devices can directly access guest memory and do so in cache
3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4
coherent fashion. Tell the guest about that fact when it's using ACPI.
4
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
5
Message-id: 20240206132931.38376-14-peter.maydell@linaro.org
6
---
7
docs/system/arm/mps2.rst | 37 ++++++++++++++++++++++++++++++++++---
8
1 file changed, 34 insertions(+), 3 deletions(-)
5
9
6
Signed-off-by: Alexander Graf <agraf@suse.de>
10
diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst
7
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
8
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
9
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
10
Message-id: 1486644810-33181-3-git-send-email-agraf@suse.de
11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
12
---
13
hw/arm/virt-acpi-build.c | 1 +
14
1 file changed, 1 insertion(+)
15
16
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
17
index XXXXXXX..XXXXXXX 100644
11
index XXXXXXX..XXXXXXX 100644
18
--- a/hw/arm/virt-acpi-build.c
12
--- a/docs/system/arm/mps2.rst
19
+++ b/hw/arm/virt-acpi-build.c
13
+++ b/docs/system/arm/mps2.rst
20
@@ -XXX,XX +XXX,XX @@ static void acpi_dsdt_add_virtio(Aml *scope,
14
@@ -XXX,XX +XXX,XX @@
21
Aml *dev = aml_device("VR%02u", i);
15
-Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an547``)
22
aml_append(dev, aml_name_decl("_HID", aml_string("LNRO0005")));
16
-=========================================================================================================================================================
23
aml_append(dev, aml_name_decl("_UID", aml_int(i)));
17
+Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an536``, ``mps3-an547``)
24
+ aml_append(dev, aml_name_decl("_CCA", aml_int(1)));
18
+=========================================================================================================================================================================
25
19
26
Aml *crs = aml_resource_template();
20
-These board models all use Arm M-profile CPUs.
27
aml_append(crs, aml_memory32_fixed(base, size, AML_READ_WRITE));
21
+These board models use Arm M-profile or R-profile CPUs.
22
23
The Arm MPS2, MPS2+ and MPS3 dev boards are FPGA based (the 2+ has a
24
bigger FPGA but is otherwise the same as the 2; the 3 has a bigger
25
@@ -XXX,XX +XXX,XX @@ FPGA image.
26
27
QEMU models the following FPGA images:
28
29
+FPGA images using M-profile CPUs:
30
+
31
``mps2-an385``
32
Cortex-M3 as documented in Arm Application Note AN385
33
``mps2-an386``
34
@@ -XXX,XX +XXX,XX @@ QEMU models the following FPGA images:
35
``mps3-an547``
36
Cortex-M55 on an MPS3, as documented in Arm Application Note AN547
37
38
+FPGA images using R-profile CPUs:
39
+
40
+``mps3-an536``
41
+ Dual Cortex-R52 on an MPS3, as documented in Arm Application Note AN536
42
+
43
Differences between QEMU and real hardware:
44
45
- AN385/AN386 remapping of low 16K of memory to either ZBT SSRAM1 or to
46
@@ -XXX,XX +XXX,XX @@ Differences between QEMU and real hardware:
47
flash, but only as simple ROM, so attempting to rewrite the flash
48
from the guest will fail
49
- QEMU does not model the USB controller in MPS3 boards
50
+- AN536 does not support runtime control of CPU reset and halt via
51
+ the SCC CFG_REG0 register.
52
+- AN536 does not support enabling or disabling the flash and ATCM
53
+ interfaces via the SCC CFG_REG1 register.
54
+- AN536 does not support setting of the initial vector table
55
+ base address via the SCC CFG_REG6 and CFG_REG7 register config,
56
+ and does not provide a mechanism for specifying these values at
57
+ startup, so all guest images must be built to start from TCM
58
+ (i.e. to expect the interrupt vector base at 0 from reset).
59
+- AN536 defaults to only creating a single CPU; this is the equivalent
60
+ of the way the real FPGA image usually runs with the second Cortex-R52
61
+ held in halt via the initial SCC CFG_REG0 register setting. You can
62
+ create the second CPU with ``-smp 2``; both CPUs will then start
63
+ execution immediately on startup.
64
+
65
+Note that for the AN536 the first UART is accessible only by
66
+CPU0, and the second UART is accessible only by CPU1. The
67
+first UART accessible shared between both CPUs is the third
68
+UART. Guest software might therefore be built to use either
69
+the first UART or the third UART; if you don't see any output
70
+from the UART you are looking at, try one of the others.
71
+(Even if the AN536 machine is started with a single CPU and so
72
+no "CPU1-only UART", the UART numbering remains the same,
73
+with the third UART being the first of the shared ones.)
74
75
Machine-specific options
76
""""""""""""""""""""""""
28
--
77
--
29
2.7.4
78
2.34.1
30
79
31
80
diff view generated by jsdifflib

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.