From: Geliang Tang <tanggeliang@kylinos.cn>
To unify the output formats of all test scripts, this patch adds
four more helpers:
mptcp_lib_pr_ok()
mptcp_lib_pr_skip()
mptcp_lib_pr_fail()
mptcp_lib_pr_info()
to print out [ OK ], [SKIP], [FAIL] and 'INFO: ' with colors. Use them
in all scripts to print the "ok/skip/fail/info' using the same 'format'.
Having colors helps to quickly identify issues when looking at a long
list of output logs and results.
Note that now all print the same keywords, which was not the case
before, but it is good to uniform that.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
---
tools/testing/selftests/net/mptcp/diag.sh | 12 ++--
.../selftests/net/mptcp/mptcp_connect.sh | 59 +++++++++----------
.../testing/selftests/net/mptcp/mptcp_join.sh | 6 +-
.../testing/selftests/net/mptcp/mptcp_lib.sh | 35 ++++++++---
.../selftests/net/mptcp/mptcp_sockopt.sh | 26 ++++----
.../testing/selftests/net/mptcp/pm_netlink.sh | 2 +-
.../selftests/net/mptcp/simult_flows.sh | 4 +-
.../selftests/net/mptcp/userspace_pm.sh | 18 ++----
8 files changed, 84 insertions(+), 78 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
index 4ffdd415e670..bc97ab33a00e 100755
--- a/tools/testing/selftests/net/mptcp/diag.sh
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -57,15 +57,15 @@ __chk_nr()
mptcp_lib_print_title "$msg"
if [ "$nr" != "$expected" ]; then
if [ "$nr" = "$skip" ] && ! mptcp_lib_expect_all_features; then
- echo "[ skip ] Feature probably not supported"
+ mptcp_lib_pr_skip "Feature probably not supported"
mptcp_lib_result_skip "${msg}"
else
- echo "[ fail ] expected $expected found $nr"
+ mptcp_lib_pr_fail "expected $expected found $nr"
mptcp_lib_result_fail "${msg}"
ret=${KSFT_FAIL}
fi
else
- echo "[ ok ]"
+ mptcp_lib_pr_ok
mptcp_lib_result_pass "${msg}"
fi
}
@@ -114,15 +114,15 @@ wait_msk_nr()
mptcp_lib_print_title "$msg"
if [ $i -ge $timeout ]; then
- echo "[ fail ] timeout while expecting $expected max $max last $nr"
+ mptcp_lib_pr_fail "timeout while expecting $expected max $max last $nr"
mptcp_lib_result_fail "${msg} # timeout"
ret=${KSFT_FAIL}
elif [ $nr != $expected ]; then
- echo "[ fail ] expected $expected found $nr"
+ mptcp_lib_pr_fail "expected $expected found $nr"
mptcp_lib_result_fail "${msg} # unexpected result"
ret=${KSFT_FAIL}
else
- echo "[ ok ]"
+ mptcp_lib_pr_ok
mptcp_lib_result_pass "${msg}"
fi
}
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
index a94655493cdc..bb7f1bcc570d 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -218,7 +218,7 @@ set_ethtool_flags() {
local flags="$3"
if ip netns exec $ns ethtool -K $dev $flags 2>/dev/null; then
- echo "INFO: set $ns dev $dev: ethtool -K $flags"
+ mptcp_lib_pr_info "set $ns dev $dev: ethtool -K $flags"
fi
}
@@ -261,7 +261,7 @@ check_mptcp_disabled()
print_larger_title "New MPTCP socket can be blocked via sysctl"
# net.mptcp.enabled should be enabled by default
if [ "$(ip netns exec ${disabled_ns} sysctl net.mptcp.enabled | awk '{ print $3 }')" -ne 1 ]; then
- echo -e "net.mptcp.enabled sysctl is not 1 by default\t\t[ FAIL ]"
+ mptcp_lib_pr_fail "net.mptcp.enabled sysctl is not 1 by default"
mptcp_lib_result_fail "net.mptcp.enabled sysctl is not 1 by default"
ret=1
return 1
@@ -274,13 +274,13 @@ check_mptcp_disabled()
mptcp_lib_ns_exit "${disabled_ns}"
if [ ${err} -eq 0 ]; then
- echo -e "New MPTCP socket cannot be blocked via sysctl\t\t[ FAIL ]"
+ mptcp_lib_pr_fail "New MPTCP socket cannot be blocked via sysctl"
mptcp_lib_result_fail "New MPTCP socket cannot be blocked via sysctl"
ret=1
return 1
fi
- echo "[ OK ]"
+ mptcp_lib_pr_ok
mptcp_lib_result_pass "New MPTCP socket can be blocked via sysctl"
return 0
}
@@ -301,7 +301,7 @@ do_ping()
ip netns exec ${connector_ns} ping ${ping_args} $connect_addr >/dev/null || rc=1
if [ $rc -ne 0 ] ; then
- echo "$listener_ns -> $connect_addr connectivity [ FAIL ]"
+ mptcp_lib_pr_fail "$listener_ns -> $connect_addr connectivity"
ret=1
return 1
@@ -336,7 +336,7 @@ do_transfer()
fi
if [ -n "$extra_args" ] && $options_log; then
- echo "INFO: extra options: $extra_args"
+ mptcp_lib_pr_info "extra options: $extra_args"
fi
options_log=false
@@ -433,7 +433,7 @@ do_transfer()
result_msg+=" # time=${duration}ms"
printf "(duration %05sms) " "${duration}"
if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
- echo "[ FAIL ] client exit code $retc, server $rets" 1>&2
+ mptcp_lib_pr_fail "client exit code $retc, server $rets"
echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2
ip netns exec ${listener_ns} ss -Menita 1>&2 -o "sport = :$port"
cat /tmp/${listener_ns}.out
@@ -475,14 +475,14 @@ do_transfer()
fi
if [ ${stat_synrx_now_l} -lt ${expect_synrx} ]; then
- printf "[ FAIL ] lower MPC SYN rx (%d) than expected (%d)\n" \
- "${stat_synrx_now_l}" "${expect_synrx}"
+ mptcp_lib_pr_fail "lower MPC SYN rx (${stat_synrx_now_l})" \
+ "than expected (${expect_synrx})"
retc=1
fi
if [ ${stat_ackrx_now_l} -lt ${expect_ackrx} ] && [ ${stat_ooo_now} -eq 0 ]; then
if [ ${stat_ooo_now} -eq 0 ]; then
- printf "[ FAIL ] lower MPC ACK rx (%d) than expected (%d)\n" \
- "${stat_ackrx_now_l}" "${expect_ackrx}"
+ mptcp_lib_pr_fail "lower MPC ACK rx (${stat_ackrx_now_l})" \
+ "than expected (${expect_ackrx})"
rets=1
else
printf "[ Note ] fallback due to TCP OoO"
@@ -497,19 +497,19 @@ do_transfer()
local csum_err_s_nr=$((csum_err_s - stat_csum_err_s))
if [ $csum_err_s_nr -gt 0 ]; then
- printf "[ FAIL ]\nserver got %d data checksum error[s]" ${csum_err_s_nr}
+ mptcp_lib_pr_fail "server got ${csum_err_s_nr} data checksum error[s]"
rets=1
fi
local csum_err_c_nr=$((csum_err_c - stat_csum_err_c))
if [ $csum_err_c_nr -gt 0 ]; then
- printf "[ FAIL ]\nclient got %d data checksum error[s]" ${csum_err_c_nr}
+ mptcp_lib_pr_fail "client got ${csum_err_c_nr} data checksum error[s]"
retc=1
fi
fi
if [ $retc -eq 0 ] && [ $rets -eq 0 ]; then
- printf "[ OK ]"
+ mptcp_lib_pr_ok
mptcp_lib_result_pass "${TEST_GROUP}: ${result_msg}"
else
mptcp_lib_result_fail "${TEST_GROUP}: ${result_msg}"
@@ -540,7 +540,6 @@ do_transfer()
"${expect_ackrx}" "${stat_ackrx_now_l}"
fi
- echo
cat "$capout"
[ $retc -eq 0 ] && [ $rets -eq 0 ]
}
@@ -666,7 +665,7 @@ run_test_transparent()
# following function has been exported (T). Not great but better than
# checking for a specific kernel version.
if ! mptcp_lib_kallsyms_has "T __ip_sock_set_tos$"; then
- echo "INFO: ${msg} not supported by the kernel: SKIP"
+ mptcp_lib_pr_skip "${msg} not supported by the kernel"
mptcp_lib_result_skip "${TEST_GROUP}"
return
fi
@@ -683,7 +682,7 @@ table inet mangle {
}
EOF
then
- echo "SKIP: $msg, could not load nft ruleset"
+ mptcp_lib_pr_skip "$msg, could not load nft ruleset"
mptcp_lib_fail_if_expected_feature "nft rules"
mptcp_lib_result_skip "${TEST_GROUP}"
return
@@ -699,7 +698,7 @@ EOF
if ! ip -net "$listener_ns" $r6flag rule add fwmark 1 lookup 100; then
ip netns exec "$listener_ns" nft flush ruleset
- echo "SKIP: $msg, ip $r6flag rule failed"
+ mptcp_lib_pr_skip "$msg, ip $r6flag rule failed"
mptcp_lib_fail_if_expected_feature "ip rule"
mptcp_lib_result_skip "${TEST_GROUP}"
return
@@ -708,13 +707,13 @@ EOF
if ! ip -net "$listener_ns" route add local $local_addr/0 dev lo table 100; then
ip netns exec "$listener_ns" nft flush ruleset
ip -net "$listener_ns" $r6flag rule del fwmark 1 lookup 100
- echo "SKIP: $msg, ip route add local $local_addr failed"
+ mptcp_lib_pr_skip "$msg, ip route add local $local_addr failed"
mptcp_lib_fail_if_expected_feature "ip route"
mptcp_lib_result_skip "${TEST_GROUP}"
return
fi
- echo "INFO: test $msg"
+ mptcp_lib_pr_info "test $msg"
PORT=10000
local extra_args="-o TRANSPARENT"
@@ -727,12 +726,12 @@ EOF
ip -net "$listener_ns" route del local $local_addr/0 dev lo table 100
if [ $lret -ne 0 ]; then
- echo "FAIL: $msg, mptcp connection error"
+ mptcp_lib_pr_fail "$msg, mptcp connection error"
ret=$lret
return 1
fi
- echo "PASS: $msg"
+ mptcp_lib_pr_info "$msg pass"
return 0
}
@@ -741,7 +740,7 @@ run_tests_peekmode()
local peekmode="$1"
TEST_GROUP="peek mode: ${peekmode}"
- echo "INFO: with peek mode: ${peekmode}"
+ mptcp_lib_pr_info "with peek mode: ${peekmode}"
run_tests_lo "$ns1" "$ns1" 10.0.1.1 1 "-P ${peekmode}"
run_tests_lo "$ns1" "$ns1" dead:beef:1::1 1 "-P ${peekmode}"
}
@@ -751,12 +750,12 @@ run_tests_mptfo()
TEST_GROUP="MPTFO"
if ! mptcp_lib_kallsyms_has "mptcp_fastopen_"; then
- echo "INFO: TFO not supported by the kernel: SKIP"
+ mptcp_lib_pr_skip "TFO not supported by the kernel"
mptcp_lib_result_skip "${TEST_GROUP}"
return
fi
- echo "INFO: with MPTFO start"
+ mptcp_lib_pr_info "with MPTFO start"
ip netns exec "$ns1" sysctl -q net.ipv4.tcp_fastopen=2
ip netns exec "$ns2" sysctl -q net.ipv4.tcp_fastopen=1
@@ -768,7 +767,7 @@ run_tests_mptfo()
ip netns exec "$ns1" sysctl -q net.ipv4.tcp_fastopen=0
ip netns exec "$ns2" sysctl -q net.ipv4.tcp_fastopen=0
- echo "INFO: with MPTFO end"
+ mptcp_lib_pr_info "with MPTFO end"
}
run_tests_disconnect()
@@ -779,7 +778,7 @@ run_tests_disconnect()
TEST_GROUP="full disconnect"
if ! mptcp_lib_kallsyms_has "mptcp_pm_data_reset$"; then
- echo "INFO: Full disconnect not supported: SKIP"
+ mptcp_lib_pr_skip "Full disconnect not supported"
mptcp_lib_result_skip "${TEST_GROUP}"
return
fi
@@ -792,7 +791,7 @@ run_tests_disconnect()
cin_disconnect="$old_cin"
connect_per_transfer=3
- echo "INFO: disconnect"
+ mptcp_lib_pr_info "disconnect"
run_tests_lo "$ns1" "$ns1" 10.0.1.1 1 "-I 3 -i $old_cin"
run_tests_lo "$ns1" "$ns1" dead:beef:1::1 1 "-I 3 -i $old_cin"
@@ -816,7 +815,7 @@ log_if_error()
local msg="$1"
if [ ${ret} -ne 0 ]; then
- echo "FAIL: ${msg}"
+ mptcp_lib_pr_fail "${msg}"
final_ret=${ret}
ret=0
@@ -863,7 +862,7 @@ done
mptcp_lib_result_code "${ret}" "ping tests"
stop_if_error "Could not even run ping tests"
-echo "[ OK ]"
+mptcp_lib_pr_ok
[ -n "$tc_loss" ] && tc -net "$ns2" qdisc add dev ns2eth3 root netem loss random $tc_loss delay ${tc_delay}ms
echo -n "INFO: Using loss of $tc_loss "
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 2f34e2b9a1c4..cecf09d14f46 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -185,17 +185,17 @@ print_info()
print_ok()
{
- mptcp_lib_print_ok "[ ok ]${1:+ ${*}}"
+ mptcp_lib_pr_ok "${@}"
}
print_fail()
{
- mptcp_lib_print_err "[fail]${1:+ ${*}}"
+ mptcp_lib_pr_fail "${@}"
}
print_skip()
{
- mptcp_lib_print_warn "[skip]${1:+ ${*}}"
+ mptcp_lib_pr_skip "${@}"
}
# [ $1: fail msg ]
diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
index 459e90258f37..1427f89df318 100644
--- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
@@ -50,6 +50,23 @@ mptcp_lib_print_err() {
mptcp_lib_print_color "${MPTCP_LIB_COLOR_RED}${*}"
}
+# shellcheck disable=SC2120 # parameters are optional
+mptcp_lib_pr_ok() {
+ mptcp_lib_print_ok "[ OK ]${1:+ ${*}}"
+}
+
+mptcp_lib_pr_skip() {
+ mptcp_lib_print_warn "[SKIP]${1:+ ${*}}"
+}
+
+mptcp_lib_pr_fail() {
+ mptcp_lib_print_err "[FAIL]${1:+ ${*}}"
+}
+
+mptcp_lib_pr_info() {
+ mptcp_lib_print_info "INFO: ${*}"
+}
+
# SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var can be set when validating all
# features using the last version of the kernel and the selftests to make sure
# a test is not being skipped by mistake.
@@ -80,14 +97,14 @@ mptcp_lib_has_file() {
mptcp_lib_check_mptcp() {
if ! mptcp_lib_has_file "/proc/sys/net/mptcp/enabled"; then
- echo "SKIP: MPTCP support is not available"
+ mptcp_lib_pr_skip "MPTCP support is not available"
exit ${KSFT_SKIP}
fi
}
mptcp_lib_check_kallsyms() {
if ! mptcp_lib_has_file "/proc/kallsyms"; then
- echo "SKIP: CONFIG_KALLSYMS is missing"
+ mptcp_lib_pr_skip "CONFIG_KALLSYMS is missing"
exit ${KSFT_SKIP}
fi
}
@@ -294,7 +311,7 @@ mptcp_lib_check_transfer() {
local what="${3}"
if ! cmp "$in" "$out" > /dev/null 2>&1; then
- echo "[ FAIL ] $what does not match (in, out):"
+ mptcp_lib_pr_fail "$what does not match (in, out):"
mptcp_lib_print_file_err "$in"
mptcp_lib_print_file_err "$out"
@@ -329,24 +346,24 @@ mptcp_lib_check_tools() {
case "${tool}" in
"ip")
if ! ip -Version &> /dev/null; then
- mptcp_lib_print_warn "SKIP: Could not run test without ip tool"
+ mptcp_lib_pr_skip "Could not run test without ip tool"
exit ${KSFT_SKIP}
fi
;;
"ss")
if ! ss -h | grep -q MPTCP; then
- mptcp_lib_print_warn "SKIP: ss tool does not support MPTCP"
+ mptcp_lib_pr_skip "ss tool does not support MPTCP"
exit ${KSFT_SKIP}
fi
;;
"iptables"* | "ip6tables"*)
if ! "${tool}" -V &> /dev/null; then
- mptcp_lib_print_warn "SKIP: Could not run all tests without ${tool}"
+ mptcp_lib_pr_skip "Could not run all tests without ${tool}"
exit ${KSFT_SKIP}
fi
;;
*)
- mptcp_lib_print_err "Internal error: unsupported tool: ${tool}"
+ mptcp_lib_pr_fail "Internal error: unsupported tool: ${tool}"
exit ${KSFT_FAIL}
;;
esac
@@ -365,13 +382,13 @@ mptcp_lib_check_output() {
fi
if [ ${cmd_ret} -ne 0 ]; then
- mptcp_lib_print_err "[FAIL] command execution '${cmd}' stderr"
+ mptcp_lib_pr_fail "command execution '${cmd}' stderr"
cat "${err}"
return 2
elif [ "${out}" = "${expected}" ]; then
return 0
else
- mptcp_lib_print_err "[FAIL] expected '${expected}' got '${out}'"
+ mptcp_lib_pr_fail "expected '${expected}' got '${out}'"
return 1
fi
}
diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
index 4aa60e8b2db1..8b3b50246182 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
@@ -103,8 +103,8 @@ check_mark()
local v
for v in $values; do
if [ $v -ne 0 ]; then
- echo "FAIL: got $tables $values in ns $ns," \
- "not 0 - not all expected packets marked"
+ mptcp_lib_pr_fail "got $tables $values in ns $ns," \
+ "not 0 - not all expected packets marked"
ret=1
return 1
fi
@@ -176,7 +176,7 @@ do_transfer()
ret=1
return 1
fi
- echo "[ OK ]"
+ mptcp_lib_pr_ok
mptcp_lib_print_title "Mark ${ip:2}"
if [ $local_addr = "::" ];then
@@ -194,10 +194,10 @@ do_transfer()
mptcp_lib_result_code "${rets}" "transfer ${ip}"
if [ $retc -eq 0 ] && [ $rets -eq 0 ];then
- echo "[ OK ]"
+ mptcp_lib_pr_ok
return 0
fi
- echo "[FAIL]"
+ mptcp_lib_pr_fail
return 1
}
@@ -218,7 +218,7 @@ do_mptcp_sockopt_tests()
local lret=0
if ! mptcp_lib_kallsyms_has "mptcp_diag_fill_info$"; then
- echo "INFO: MPTCP sockopt not supported: SKIP"
+ mptcp_lib_pr_skip "MPTCP sockopt not supported"
mptcp_lib_result_skip "sockopt"
return
fi
@@ -228,12 +228,12 @@ do_mptcp_sockopt_tests()
mptcp_lib_print_title "SOL_MPTCP sockopt v4"
if [ $lret -ne 0 ]; then
- echo "[FAIL]"
+ mptcp_lib_pr_fail
mptcp_lib_result_fail "sockopt v4"
ret=$lret
return
fi
- echo "[ OK ]"
+ mptcp_lib_pr_ok
mptcp_lib_result_pass "sockopt v4"
ip netns exec "$ns_sbox" ./mptcp_sockopt -6
@@ -241,12 +241,12 @@ do_mptcp_sockopt_tests()
mptcp_lib_print_title "SOL_MPTCP sockopt v6"
if [ $lret -ne 0 ]; then
- echo "[FAIL]"
+ mptcp_lib_pr_fail
mptcp_lib_result_fail "sockopt v6"
ret=$lret
return
fi
- echo "[ OK ]"
+ mptcp_lib_pr_ok
mptcp_lib_result_pass "sockopt v6"
}
@@ -274,12 +274,12 @@ do_tcpinq_test()
local lret=$?
if [ $lret -ne 0 ];then
ret=$lret
- echo "[FAIL]"
+ mptcp_lib_pr_fail
mptcp_lib_result_fail "TCP_INQ: $*"
return $lret
fi
- echo "[ OK ]"
+ mptcp_lib_pr_ok
mptcp_lib_result_pass "TCP_INQ: $*"
return $lret
}
@@ -289,7 +289,7 @@ do_tcpinq_tests()
local lret=0
if ! mptcp_lib_kallsyms_has "mptcp_ioctl$"; then
- echo "INFO: TCP_INQ not supported: SKIP"
+ mptcp_lib_pr_skip "TCP_INQ not supported"
mptcp_lib_result_skip "TCP_INQ"
return
fi
diff --git a/tools/testing/selftests/net/mptcp/pm_netlink.sh b/tools/testing/selftests/net/mptcp/pm_netlink.sh
index 5b9bc25dfef4..69ffff8b076b 100755
--- a/tools/testing/selftests/net/mptcp/pm_netlink.sh
+++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh
@@ -190,7 +190,7 @@ else
for st in fullmesh nofullmesh backup,fullmesh; do
st=" (${st})"
mptcp_lib_print_title "${st}"
- echo "[SKIP]"
+ mptcp_lib_pr_skip
mptcp_lib_result_skip "${st}"
done
fi
diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh
index 03fd08e8e044..4ee18406ee50 100755
--- a/tools/testing/selftests/net/mptcp/simult_flows.sh
+++ b/tools/testing/selftests/net/mptcp/simult_flows.sh
@@ -187,12 +187,12 @@ do_transfer()
printf "%-16s" " max $max_time "
if [ $retc -eq 0 ] && [ $rets -eq 0 ] && \
[ $cmpc -eq 0 ] && [ $cmps -eq 0 ]; then
- echo "[ OK ]"
+ mptcp_lib_pr_ok
cat "$capout"
return 0
fi
- echo " [ fail ]"
+ mptcp_lib_pr_fail
echo "client exit code $retc, server $rets" 1>&2
echo -e "\nnetns ${ns3} socket stat for $port:" 1>&2
ip netns exec ${ns3} ss -nita 1>&2 -o "sport = :$port"
diff --git a/tools/testing/selftests/net/mptcp/userspace_pm.sh b/tools/testing/selftests/net/mptcp/userspace_pm.sh
index ca238592baee..0eaf11b0b0bc 100755
--- a/tools/testing/selftests/net/mptcp/userspace_pm.sh
+++ b/tools/testing/selftests/net/mptcp/userspace_pm.sh
@@ -63,7 +63,7 @@ _printf() {
print_title()
{
- _printf "INFO: %s\n" "${1}"
+ mptcp_lib_pr_info "${1}"
}
# $1: test name
@@ -74,33 +74,23 @@ print_test()
mptcp_lib_print_title "${test_name}"
}
-print_results()
-{
- _printf "[%s]\n" "${1}"
-}
-
test_pass()
{
- print_results " OK "
+ mptcp_lib_pr_ok
mptcp_lib_result_pass "${test_name}"
}
test_skip()
{
- print_results "SKIP"
+ mptcp_lib_pr_skip
mptcp_lib_result_skip "${test_name}"
}
# $1: msg
test_fail()
{
- print_results "FAIL"
+ mptcp_lib_pr_fail "${@}"
ret=1
-
- if [ -n "${1}" ]; then
- _printf "\t%s\n" "${1}"
- fi
-
mptcp_lib_result_fail "${test_name}"
}
--
2.40.1© 2016 - 2026 Red Hat, Inc.