[PATCH iproute2-next v6] mptcp: add the fullmesh flag setting support

Geliang Tang posted 1 patch 1 week, 3 days ago
Failed in applying to current master (apply log)
ip/ipmptcp.c        | 18 +++++++++++++-----
man/man8/ip-mptcp.8 |  8 ++++++--
2 files changed, 19 insertions(+), 7 deletions(-)

[PATCH iproute2-next v6] mptcp: add the fullmesh flag setting support

Posted by Geliang Tang 1 week, 3 days ago
This patch added the fullmesh flag setting support.

 ip mptcp endpoint change id 1 fullmesh
 ip mptcp endpoint change id 1 nofullmesh
 ip mptcp endpoint change id 1 backup fullmesh
 ip mptcp endpoint change id 1 nobackup nofullmesh

Added the fullmesh flag check for the adding address too.

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
---
 v6:
 - update the flags check as Mat suggested.

 v5:
 - support to set backup and fullmesh flags together.
---
 ip/ipmptcp.c        | 18 +++++++++++++-----
 man/man8/ip-mptcp.8 |  8 ++++++--
 2 files changed, 19 insertions(+), 7 deletions(-)

diff --git a/ip/ipmptcp.c b/ip/ipmptcp.c
index 4363e753..5c8b1627 100644
--- a/ip/ipmptcp.c
+++ b/ip/ipmptcp.c
@@ -25,7 +25,8 @@ static void usage(void)
 		"Usage:	ip mptcp endpoint add ADDRESS [ dev NAME ] [ id ID ]\n"
 		"				      [ port NR ] [ FLAG-LIST ]\n"
 		"	ip mptcp endpoint delete id ID [ ADDRESS ]\n"
-		"	ip mptcp endpoint change id ID [ backup | nobackup ]\n"
+		"	ip mptcp endpoint change id ID [ backup | nobackup |\n"
+		"					 fullmesh | nofullmesh ]\n"
 		"	ip mptcp endpoint show [ id ID ]\n"
 		"	ip mptcp endpoint flush\n"
 		"	ip mptcp limits set [ subflows NR ] [ add_addr_accepted NR ]\n"
@@ -46,7 +47,7 @@ static int genl_family = -1;
 	GENL_REQUEST(_req, MPTCP_BUFLEN, genl_family, 0,	\
 		     MPTCP_PM_VER, _cmd, _flags)
 
-#define MPTCP_PM_ADDR_FLAG_NOBACKUP 0x0
+#define MPTCP_PM_ADDR_FLAG_NONE 0x0
 
 /* Mapping from argument to address flag mask */
 static const struct {
@@ -57,7 +58,8 @@ static const struct {
 	{ "subflow",		MPTCP_PM_ADDR_FLAG_SUBFLOW },
 	{ "backup",		MPTCP_PM_ADDR_FLAG_BACKUP },
 	{ "fullmesh",		MPTCP_PM_ADDR_FLAG_FULLMESH },
-	{ "nobackup",		MPTCP_PM_ADDR_FLAG_NOBACKUP }
+	{ "nobackup",		MPTCP_PM_ADDR_FLAG_NONE },
+	{ "nofullmesh",		MPTCP_PM_ADDR_FLAG_NONE }
 };
 
 static void print_mptcp_addr_flags(unsigned int flags)
@@ -116,9 +118,15 @@ static int mptcp_parse_opt(int argc, char **argv, struct nlmsghdr *n, int cmd)
 	ll_init_map(&rth);
 	while (argc > 0) {
 		if (get_flags(*argv, &flags) == 0) {
-			/* allow changing the 'backup' flag only */
+			if (adding &&
+			    (flags & MPTCP_PM_ADDR_FLAG_SIGNAL) &&
+			    (flags & MPTCP_PM_ADDR_FLAG_FULLMESH))
+				invarg("invalid flags\n", *argv);
+
+			/* allow changing the 'backup' and 'fullmesh' flags only */
 			if (cmd == MPTCP_PM_CMD_SET_FLAGS &&
-			    (flags & ~MPTCP_PM_ADDR_FLAG_BACKUP))
+			    (flags & ~(MPTCP_PM_ADDR_FLAG_BACKUP |
+				       MPTCP_PM_ADDR_FLAG_FULLMESH)))
 				invarg("invalid flags\n", *argv);
 
 		} else if (matches(*argv, "id") == 0) {
diff --git a/man/man8/ip-mptcp.8 b/man/man8/ip-mptcp.8
index 0e789225..bddbff3c 100644
--- a/man/man8/ip-mptcp.8
+++ b/man/man8/ip-mptcp.8
@@ -41,7 +41,7 @@ ip-mptcp \- MPTCP path manager configuration
 .BR "ip mptcp endpoint change id "
 .I ID
 .RB "[ "
-.I BACKUP-OPT
+.I CHANGE-OPT
 .RB "] "
 
 .ti -8
@@ -68,10 +68,14 @@ ip-mptcp \- MPTCP path manager configuration
 .RB  "]"
 
 .ti -8
-.IR BACKUP-OPT " := ["
+.IR CHANGE-OPT " := ["
 .B backup
 .RB "|"
 .B nobackup
+.RB "|"
+.B fullmesh
+.RB "|"
+.B nofullmesh
 .RB  "]"
 
 .ti -8
-- 
2.31.1


Re: [PATCH iproute2-next v6] mptcp: add the fullmesh flag setting support

Posted by Mat Martineau 1 week, 3 days ago
On Sat, 15 Jan 2022, Geliang Tang wrote:

> This patch added the fullmesh flag setting support.
>
> ip mptcp endpoint change id 1 fullmesh
> ip mptcp endpoint change id 1 nofullmesh
> ip mptcp endpoint change id 1 backup fullmesh
> ip mptcp endpoint change id 1 nobackup nofullmesh
>
> Added the fullmesh flag check for the adding address too.
>
> Signed-off-by: Geliang Tang <geliang.tang@suse.com>
> ---
> v6:
> - update the flags check as Mat suggested.

Thanks Geliang, v6 looks good to me:

Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>


>
> v5:
> - support to set backup and fullmesh flags together.
> ---
> ip/ipmptcp.c        | 18 +++++++++++++-----
> man/man8/ip-mptcp.8 |  8 ++++++--
> 2 files changed, 19 insertions(+), 7 deletions(-)
>
> diff --git a/ip/ipmptcp.c b/ip/ipmptcp.c
> index 4363e753..5c8b1627 100644
> --- a/ip/ipmptcp.c
> +++ b/ip/ipmptcp.c
> @@ -25,7 +25,8 @@ static void usage(void)
> 		"Usage:	ip mptcp endpoint add ADDRESS [ dev NAME ] [ id ID ]\n"
> 		"				      [ port NR ] [ FLAG-LIST ]\n"
> 		"	ip mptcp endpoint delete id ID [ ADDRESS ]\n"
> -		"	ip mptcp endpoint change id ID [ backup | nobackup ]\n"
> +		"	ip mptcp endpoint change id ID [ backup | nobackup |\n"
> +		"					 fullmesh | nofullmesh ]\n"
> 		"	ip mptcp endpoint show [ id ID ]\n"
> 		"	ip mptcp endpoint flush\n"
> 		"	ip mptcp limits set [ subflows NR ] [ add_addr_accepted NR ]\n"
> @@ -46,7 +47,7 @@ static int genl_family = -1;
> 	GENL_REQUEST(_req, MPTCP_BUFLEN, genl_family, 0,	\
> 		     MPTCP_PM_VER, _cmd, _flags)
>
> -#define MPTCP_PM_ADDR_FLAG_NOBACKUP 0x0
> +#define MPTCP_PM_ADDR_FLAG_NONE 0x0
>
> /* Mapping from argument to address flag mask */
> static const struct {
> @@ -57,7 +58,8 @@ static const struct {
> 	{ "subflow",		MPTCP_PM_ADDR_FLAG_SUBFLOW },
> 	{ "backup",		MPTCP_PM_ADDR_FLAG_BACKUP },
> 	{ "fullmesh",		MPTCP_PM_ADDR_FLAG_FULLMESH },
> -	{ "nobackup",		MPTCP_PM_ADDR_FLAG_NOBACKUP }
> +	{ "nobackup",		MPTCP_PM_ADDR_FLAG_NONE },
> +	{ "nofullmesh",		MPTCP_PM_ADDR_FLAG_NONE }
> };
>
> static void print_mptcp_addr_flags(unsigned int flags)
> @@ -116,9 +118,15 @@ static int mptcp_parse_opt(int argc, char **argv, struct nlmsghdr *n, int cmd)
> 	ll_init_map(&rth);
> 	while (argc > 0) {
> 		if (get_flags(*argv, &flags) == 0) {
> -			/* allow changing the 'backup' flag only */
> +			if (adding &&
> +			    (flags & MPTCP_PM_ADDR_FLAG_SIGNAL) &&
> +			    (flags & MPTCP_PM_ADDR_FLAG_FULLMESH))
> +				invarg("invalid flags\n", *argv);
> +
> +			/* allow changing the 'backup' and 'fullmesh' flags only */
> 			if (cmd == MPTCP_PM_CMD_SET_FLAGS &&
> -			    (flags & ~MPTCP_PM_ADDR_FLAG_BACKUP))
> +			    (flags & ~(MPTCP_PM_ADDR_FLAG_BACKUP |
> +				       MPTCP_PM_ADDR_FLAG_FULLMESH)))
> 				invarg("invalid flags\n", *argv);
>
> 		} else if (matches(*argv, "id") == 0) {
> diff --git a/man/man8/ip-mptcp.8 b/man/man8/ip-mptcp.8
> index 0e789225..bddbff3c 100644
> --- a/man/man8/ip-mptcp.8
> +++ b/man/man8/ip-mptcp.8
> @@ -41,7 +41,7 @@ ip-mptcp \- MPTCP path manager configuration
> .BR "ip mptcp endpoint change id "
> .I ID
> .RB "[ "
> -.I BACKUP-OPT
> +.I CHANGE-OPT
> .RB "] "
>
> .ti -8
> @@ -68,10 +68,14 @@ ip-mptcp \- MPTCP path manager configuration
> .RB  "]"
>
> .ti -8
> -.IR BACKUP-OPT " := ["
> +.IR CHANGE-OPT " := ["
> .B backup
> .RB "|"
> .B nobackup
> +.RB "|"
> +.B fullmesh
> +.RB "|"
> +.B nofullmesh
> .RB  "]"
>
> .ti -8
> -- 
> 2.31.1
>
>
>

--
Mat Martineau
Intel