1. Patchew
  2. MPTCP
  3. [PATCH mptcp-net 0/6] selftests: mptcp: join: fix flaky tests
  4. View patch

[PATCH mptcp-net 2/6] selftests: mptcp: join: rm: set backup flag

Matthieu Baerts (NGI0) posted 6 patches 3 weeks, 5 days ago
There is a newer version of this series
[PATCH mptcp-net 2/6] selftests: mptcp: join: rm: set backup flag
Posted by Matthieu Baerts (NGI0) 3 weeks, 5 days ago 
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.

To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.

Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
---
 tools/testing/selftests/net/mptcp/mptcp_join.sh | 54 ++++++++++++-------------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index e0cdb9c662aa..399805812197 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -2552,7 +2552,7 @@ remove_tests()
 	if reset "remove single subflow"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
-		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
 		addr_nr_ns2=-1 speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
@@ -2565,8 +2565,8 @@ remove_tests()
 	if reset "remove multiple subflows"; then
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
-		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
 		addr_nr_ns2=-2 speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
@@ -2577,7 +2577,7 @@ remove_tests()
 	# single address, remove
 	if reset "remove single address"; then
 		pm_nl_set_limits $ns1 0 1
-		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
 		pm_nl_set_limits $ns2 1 1
 		addr_nr_ns1=-1 speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
@@ -2590,9 +2590,9 @@ remove_tests()
 	# subflow and signal, remove
 	if reset "remove subflow and signal"; then
 		pm_nl_set_limits $ns1 0 2
-		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
 		pm_nl_set_limits $ns2 1 2
-		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
 		addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
@@ -2604,10 +2604,10 @@ remove_tests()
 	# subflows and signal, remove
 	if reset "remove subflows and signal"; then
 		pm_nl_set_limits $ns1 0 3
-		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
 		pm_nl_set_limits $ns2 1 3
-		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
+		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup
 		addr_nr_ns1=-1 addr_nr_ns2=-2 speed=10 \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3
@@ -2619,9 +2619,9 @@ remove_tests()
 	# addresses remove
 	if reset "remove addresses"; then
 		pm_nl_set_limits $ns1 3 3
-		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
-		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-		pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup id 250
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
+		pm_nl_add_endpoint $ns1 10.0.4.1 flags signal,backup
 		pm_nl_set_limits $ns2 3 3
 		addr_nr_ns1=-3 speed=10 \
 			run_tests $ns1 $ns2 10.0.1.1
@@ -2634,10 +2634,10 @@ remove_tests()
 	# invalid addresses remove
 	if reset "remove invalid addresses"; then
 		pm_nl_set_limits $ns1 3 3
-		pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.12.1 flags signal,backup
 		# broadcast IP: no packet for this address will be received on ns1
-		pm_nl_add_endpoint $ns1 224.0.0.1 flags signal
-		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+		pm_nl_add_endpoint $ns1 224.0.0.1 flags signal,backup
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
 		pm_nl_set_limits $ns2 2 2
 		addr_nr_ns1=-3 speed=10 \
 			run_tests $ns1 $ns2 10.0.1.1
@@ -2651,10 +2651,10 @@ remove_tests()
 	# subflows and signal, flush
 	if reset "flush subflows and signal"; then
 		pm_nl_set_limits $ns1 0 3
-		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
 		pm_nl_set_limits $ns2 1 3
-		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
+		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup
 		addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3
@@ -2667,9 +2667,9 @@ remove_tests()
 	if reset "flush subflows"; then
 		pm_nl_set_limits $ns1 3 3
 		pm_nl_set_limits $ns2 3 3
-		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
-		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup id 150
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
+		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup
 		addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3
@@ -2686,9 +2686,9 @@ remove_tests()
 	# addresses flush
 	if reset "flush addresses"; then
 		pm_nl_set_limits $ns1 3 3
-		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
-		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-		pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup id 250
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
+		pm_nl_add_endpoint $ns1 10.0.4.1 flags signal,backup
 		pm_nl_set_limits $ns2 3 3
 		addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
@@ -2701,9 +2701,9 @@ remove_tests()
 	# invalid addresses flush
 	if reset "flush invalid addresses"; then
 		pm_nl_set_limits $ns1 3 3
-		pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
-		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-		pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.12.1 flags signal,backup
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
+		pm_nl_add_endpoint $ns1 10.0.14.1 flags signal,backup
 		pm_nl_set_limits $ns2 3 3
 		addr_nr_ns1=-8 speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1

-- 
2.51.0

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.