[PATCH net] net: mptcp: fix unreleased socket in accept queue

menglong8.dong@gmail.com posted 1 patch 3 weeks, 2 days ago
Patches applied successfully (tree, apply log)
git fetch https://github.com/multipath-tcp/mptcp_net-next tags/patchew/20220905050400.1136241-1-imagedong@tencent.com
There is a newer version of this series
Maintainers: Eric Dumazet <edumazet@google.com>, Matthieu Baerts <matthieu.baerts@tessares.net>, Jakub Kicinski <kuba@kernel.org>, Mat Martineau <mathew.j.martineau@linux.intel.com>, Paolo Abeni <pabeni@redhat.com>, "David S. Miller" <davem@davemloft.net>
net/mptcp/subflow.c | 4 ++++
1 file changed, 4 insertions(+)
[PATCH net] net: mptcp: fix unreleased socket in accept queue
Posted by menglong8.dong@gmail.com 3 weeks, 2 days ago
From: Menglong Dong <imagedong@tencent.com>

The mptcp socket and its subflow sockets in accept queue can't be
released after the process exit.

While the release of a mptcp socket in listening state, the
corresponding tcp socket will be released too. Meanwhile, the tcp
socket in the unaccept queue will be released too. However, only init
subflow is in the unaccept queue, and the joined subflow is not in the
unaccept queue, which makes the joined subflow won't be released, and
therefore the corresponding unaccepted mptcp socket will not be released
to.

This can be reproduced easily with following steps:

1. create 2 namespace and veth:
   $ ip netns add mptcp-client
   $ ip netns add mptcp-server
   $ sysctl -w net.ipv4.conf.all.rp_filter=0
   $ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
   $ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
   $ ip link add red-client netns mptcp-client type veth peer red-server \
     netns mptcp-server
   $ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
   $ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
   $ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
   $ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
   $ ip -n mptcp-server link set red-server up
   $ ip -n mptcp-client link set red-client up

2. configure the endpoint and limit for client and server:
   $ ip -n mptcp-server mptcp endpoint flush
   $ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
   $ ip -n mptcp-client mptcp endpoint flush
   $ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
   $ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
     1 subflow

3. listen and accept on a port, such as 9999. The nc command we used
   here is modified, which makes it uses mptcp protocol by default.
   And the default backlog is 1:
   ip netns exec mptcp-server nc -l -k -p 9999

4. open another *two* terminal and connect to the server with the
   following command:
   $ ip netns exec mptcp-client nc 10.0.0.1 9999
   input something after connect, to triger the connection of the second
   subflow

5. exit all the nc command, and check the tcp socket in server namespace.
   And you will find that there is one tcp socket in CLOSE_WAIT state
   and can't release forever.

There are some solutions that I thought:

1. release all unaccepted mptcp socket with mptcp_close() while the
   listening tcp socket release in mptcp_subflow_queue_clean(). This is
   what we do in this commit.
2. release the mptcp socket with mptcp_close() in subflow_ulp_release().
3. etc

Signed-off-by: Menglong Dong <imagedong@tencent.com>
---
 net/mptcp/subflow.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index c7d49fb6e7bd..e39dff5d5d84 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -1770,6 +1770,10 @@ void mptcp_subflow_queue_clean(struct sock *listener_ssk)
 		msk->first = NULL;
 		msk->dl_next = NULL;
 		unlock_sock_fast(sk, slow);
+
+		/*  */
+		sock_hold(sk);
+		sk->sk_prot->close(sk);
 	}
 
 	/* we are still under the listener msk socket lock */
-- 
2.37.2
Re: [PATCH net] net: mptcp: fix unreleased socket in accept queue
Posted by Paolo Abeni 3 weeks, 2 days ago
Hello,

On Mon, 2022-09-05 at 13:04 +0800, menglong8.dong@gmail.com wrote:
> From: Menglong Dong <imagedong@tencent.com>
> 
> The mptcp socket and its subflow sockets in accept queue can't be
> released after the process exit.
> 
> While the release of a mptcp socket in listening state, the
> corresponding tcp socket will be released too. Meanwhile, the tcp
> socket in the unaccept queue will be released too. However, only init
> subflow is in the unaccept queue, and the joined subflow is not in the
> unaccept queue, which makes the joined subflow won't be released, and
> therefore the corresponding unaccepted mptcp socket will not be released
> to.
> 
> This can be reproduced easily with following steps:
> 
> 1. create 2 namespace and veth:
>    $ ip netns add mptcp-client
>    $ ip netns add mptcp-server
>    $ sysctl -w net.ipv4.conf.all.rp_filter=0
>    $ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
>    $ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
>    $ ip link add red-client netns mptcp-client type veth peer red-server \
>      netns mptcp-server
>    $ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
>    $ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
>    $ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
>    $ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
>    $ ip -n mptcp-server link set red-server up
>    $ ip -n mptcp-client link set red-client up
> 
> 2. configure the endpoint and limit for client and server:
>    $ ip -n mptcp-server mptcp endpoint flush
>    $ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
>    $ ip -n mptcp-client mptcp endpoint flush
>    $ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
>    $ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
>      1 subflow
> 
> 3. listen and accept on a port, such as 9999. The nc command we used
>    here is modified, which makes it uses mptcp protocol by default.
>    And the default backlog is 1:
>    ip netns exec mptcp-server nc -l -k -p 9999
> 
> 4. open another *two* terminal and connect to the server with the
>    following command:
>    $ ip netns exec mptcp-client nc 10.0.0.1 9999
>    input something after connect, to triger the connection of the second
>    subflow
> 
> 5. exit all the nc command, and check the tcp socket in server namespace.
>    And you will find that there is one tcp socket in CLOSE_WAIT state
>    and can't release forever.

Thank you for the report! 

I have a doubt WRT the above scenario: AFAICS 'nc' will accept the
incoming sockets ASAP, so the unaccepted queue should be empty at
shutdown, but that does not fit with your description?!?

> There are some solutions that I thought:
> 
> 1. release all unaccepted mptcp socket with mptcp_close() while the
>    listening tcp socket release in mptcp_subflow_queue_clean(). This is
>    what we do in this commit.
> 2. release the mptcp socket with mptcp_close() in subflow_ulp_release().
> 3. etc
> 

Can you please point to a commit introducing the issue?

> Signed-off-by: Menglong Dong <imagedong@tencent.com>
> ---
>  net/mptcp/subflow.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
> index c7d49fb6e7bd..e39dff5d5d84 100644
> --- a/net/mptcp/subflow.c
> +++ b/net/mptcp/subflow.c
> @@ -1770,6 +1770,10 @@ void mptcp_subflow_queue_clean(struct sock *listener_ssk)
>  		msk->first = NULL;
>  		msk->dl_next = NULL;
>  		unlock_sock_fast(sk, slow);
> +
> +		/*  */
> +		sock_hold(sk);
> +		sk->sk_prot->close(sk);

You can call mptcp_close() directly here.

Perhaps we could as well drop the mptcp_sock_destruct() hack?

Perhpas even providing a __mptcp_close() variant not acquiring the
socket lock and move such close call inside the existing sk socket lock
above?

Thanks,

Paolo


Re: [PATCH net] net: mptcp: fix unreleased socket in accept queue
Posted by Menglong Dong 3 weeks, 2 days ago
On Mon, Sep 5, 2022 at 4:26 PM Paolo Abeni <pabeni@redhat.com> wrote:
>
> Hello,
>
> On Mon, 2022-09-05 at 13:04 +0800, menglong8.dong@gmail.com wrote:
> > From: Menglong Dong <imagedong@tencent.com>
> >
> > The mptcp socket and its subflow sockets in accept queue can't be
> > released after the process exit.
> >
> > While the release of a mptcp socket in listening state, the
> > corresponding tcp socket will be released too. Meanwhile, the tcp
> > socket in the unaccept queue will be released too. However, only init
> > subflow is in the unaccept queue, and the joined subflow is not in the
> > unaccept queue, which makes the joined subflow won't be released, and
> > therefore the corresponding unaccepted mptcp socket will not be released
> > to.
> >
> > This can be reproduced easily with following steps:
> >
> > 1. create 2 namespace and veth:
> >    $ ip netns add mptcp-client
> >    $ ip netns add mptcp-server
> >    $ sysctl -w net.ipv4.conf.all.rp_filter=0
> >    $ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
> >    $ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
> >    $ ip link add red-client netns mptcp-client type veth peer red-server \
> >      netns mptcp-server
> >    $ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
> >    $ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
> >    $ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
> >    $ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
> >    $ ip -n mptcp-server link set red-server up
> >    $ ip -n mptcp-client link set red-client up
> >
> > 2. configure the endpoint and limit for client and server:
> >    $ ip -n mptcp-server mptcp endpoint flush
> >    $ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
> >    $ ip -n mptcp-client mptcp endpoint flush
> >    $ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
> >    $ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
> >      1 subflow
> >
> > 3. listen and accept on a port, such as 9999. The nc command we used
> >    here is modified, which makes it uses mptcp protocol by default.
> >    And the default backlog is 1:
> >    ip netns exec mptcp-server nc -l -k -p 9999
> >
> > 4. open another *two* terminal and connect to the server with the
> >    following command:
> >    $ ip netns exec mptcp-client nc 10.0.0.1 9999
> >    input something after connect, to triger the connection of the second
> >    subflow
> >
> > 5. exit all the nc command, and check the tcp socket in server namespace.
> >    And you will find that there is one tcp socket in CLOSE_WAIT state
> >    and can't release forever.
>
> Thank you for the report!
>
> I have a doubt WRT the above scenario: AFAICS 'nc' will accept the
> incoming sockets ASAP, so the unaccepted queue should be empty at
> shutdown, but that does not fit with your description?!?
>

By default, as far as in my case, nc won't accept the new connection
until the first connection closes with the '-k' set. Therefor, the second
connection will stay in the unaccepted queue.

> > There are some solutions that I thought:
> >
> > 1. release all unaccepted mptcp socket with mptcp_close() while the
> >    listening tcp socket release in mptcp_subflow_queue_clean(). This is
> >    what we do in this commit.
> > 2. release the mptcp socket with mptcp_close() in subflow_ulp_release().
> > 3. etc
> >
>
> Can you please point to a commit introducing the issue?
>

In fact, I'm not sure. In my case, I found this issue in kernel 5.10.
And I wanted to find the solution in the upstream, but find that
upstream has this issue too.

Hmm...I am curious if this issue exists in the beginning? I
can't find the opportunity that the joined subflow which are
unaccepted can be released.

> > Signed-off-by: Menglong Dong <imagedong@tencent.com>
> > ---
> >  net/mptcp/subflow.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
> > index c7d49fb6e7bd..e39dff5d5d84 100644
> > --- a/net/mptcp/subflow.c
> > +++ b/net/mptcp/subflow.c
> > @@ -1770,6 +1770,10 @@ void mptcp_subflow_queue_clean(struct sock *listener_ssk)
> >               msk->first = NULL;
> >               msk->dl_next = NULL;
> >               unlock_sock_fast(sk, slow);
> > +
> > +             /*  */
> > +             sock_hold(sk);
> > +             sk->sk_prot->close(sk);
>
> You can call mptcp_close() directly here.
>
> Perhaps we could as well drop the mptcp_sock_destruct() hack?

Do you mean to call mptcp_sock_destruct() directly here?

>
> Perhpas even providing a __mptcp_close() variant not acquiring the
> socket lock and move such close call inside the existing sk socket lock
> above?
>

Yeah, sounds nice.

Thanks!
Menglong Dong

> Thanks,
>
> Paolo
>
Re: [PATCH net] net: mptcp: fix unreleased socket in accept queue
Posted by Paolo Abeni 3 weeks, 1 day ago
On Mon, 2022-09-05 at 17:03 +0800, Menglong Dong wrote:
> On Mon, Sep 5, 2022 at 4:26 PM Paolo Abeni <pabeni@redhat.com> wrote:
> > 
> > Hello,
> > 
> > On Mon, 2022-09-05 at 13:04 +0800, menglong8.dong@gmail.com wrote:
> > > From: Menglong Dong <imagedong@tencent.com>
> > > 
> > > The mptcp socket and its subflow sockets in accept queue can't be
> > > released after the process exit.
> > > 
> > > While the release of a mptcp socket in listening state, the
> > > corresponding tcp socket will be released too. Meanwhile, the tcp
> > > socket in the unaccept queue will be released too. However, only init
> > > subflow is in the unaccept queue, and the joined subflow is not in the
> > > unaccept queue, which makes the joined subflow won't be released, and
> > > therefore the corresponding unaccepted mptcp socket will not be released
> > > to.
> > > 
> > > This can be reproduced easily with following steps:
> > > 
> > > 1. create 2 namespace and veth:
> > >    $ ip netns add mptcp-client
> > >    $ ip netns add mptcp-server
> > >    $ sysctl -w net.ipv4.conf.all.rp_filter=0
> > >    $ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
> > >    $ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
> > >    $ ip link add red-client netns mptcp-client type veth peer red-server \
> > >      netns mptcp-server
> > >    $ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
> > >    $ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
> > >    $ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
> > >    $ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
> > >    $ ip -n mptcp-server link set red-server up
> > >    $ ip -n mptcp-client link set red-client up
> > > 
> > > 2. configure the endpoint and limit for client and server:
> > >    $ ip -n mptcp-server mptcp endpoint flush
> > >    $ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
> > >    $ ip -n mptcp-client mptcp endpoint flush
> > >    $ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
> > >    $ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
> > >      1 subflow
> > > 
> > > 3. listen and accept on a port, such as 9999. The nc command we used
> > >    here is modified, which makes it uses mptcp protocol by default.
> > >    And the default backlog is 1:
> > >    ip netns exec mptcp-server nc -l -k -p 9999
> > > 
> > > 4. open another *two* terminal and connect to the server with the
> > >    following command:
> > >    $ ip netns exec mptcp-client nc 10.0.0.1 9999
> > >    input something after connect, to triger the connection of the second
> > >    subflow
> > > 
> > > 5. exit all the nc command, and check the tcp socket in server namespace.
> > >    And you will find that there is one tcp socket in CLOSE_WAIT state
> > >    and can't release forever.
> > 
> > Thank you for the report!
> > 
> > I have a doubt WRT the above scenario: AFAICS 'nc' will accept the
> > incoming sockets ASAP, so the unaccepted queue should be empty at
> > shutdown, but that does not fit with your description?!?
> > 
> 
> By default, as far as in my case, nc won't accept the new connection
> until the first connection closes with the '-k' set. Therefor, the second
> connection will stay in the unaccepted queue.

I missed the fact you opened 2 connections. I guess that is point 4
above. Please rephrase that sentence with something alike:

---
4. open another *two* terminal and use each of them to connect to the
server with the following command:
...
So that there are two established mptcp connections, with the second
one still unaccepted.
---
> 
> > > There are some solutions that I thought:
> > > 
> > > 1. release all unaccepted mptcp socket with mptcp_close() while the
> > >    listening tcp socket release in mptcp_subflow_queue_clean(). This is
> > >    what we do in this commit.
> > > 2. release the mptcp socket with mptcp_close() in subflow_ulp_release().
> > > 3. etc
> > > 
> > 
> > Can you please point to a commit introducing the issue?
> > 
> 
> In fact, I'm not sure. In my case, I found this issue in kernel 5.10.
> And I wanted to find the solution in the upstream, but find that
> upstream has this issue too.
> 
> Hmm...I am curious if this issue exists in the beginning? I
> can't find the opportunity that the joined subflow which are
> unaccepted can be released.

It looks like the problem is there since MPJ support, commit
f296234c98a8fcec94eec80304a873f635d350ea

> 
> > > Signed-off-by: Menglong Dong <imagedong@tencent.com>
> > > ---
> > >  net/mptcp/subflow.c | 4 ++++
> > >  1 file changed, 4 insertions(+)
> > > 
> > > diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
> > > index c7d49fb6e7bd..e39dff5d5d84 100644
> > > --- a/net/mptcp/subflow.c
> > > +++ b/net/mptcp/subflow.c
> > > @@ -1770,6 +1770,10 @@ void mptcp_subflow_queue_clean(struct sock *listener_ssk)
> > >               msk->first = NULL;
> > >               msk->dl_next = NULL;
> > >               unlock_sock_fast(sk, slow);
> > > +
> > > +             /*  */
> > > +             sock_hold(sk);
> > > +             sk->sk_prot->close(sk);
> > 
> > You can call mptcp_close() directly here.
> > 
> > Perhaps we could as well drop the mptcp_sock_destruct() hack?
> 
> Do you mean to call mptcp_sock_destruct() directly here?

I suspect that with this change setting msk->sk_destruct to
mptcp_sock_destruct in subflow_syn_recv_sock() is not needed anymore,
and the relevant intialization (and callback definition) could be
removed.

> 
Cheers,

Paolo
Re: [PATCH net] net: mptcp: fix unreleased socket in accept queue
Posted by Menglong Dong 3 weeks ago
On Tue, Sep 6, 2022 at 3:02 PM Paolo Abeni <pabeni@redhat.com> wrote:
>
> On Mon, 2022-09-05 at 17:03 +0800, Menglong Dong wrote:
> > On Mon, Sep 5, 2022 at 4:26 PM Paolo Abeni <pabeni@redhat.com> wrote:
> > >
> > > Hello,
> > >
> > > On Mon, 2022-09-05 at 13:04 +0800, menglong8.dong@gmail.com wrote:
> > > > From: Menglong Dong <imagedong@tencent.com>
> > > >
> > > > The mptcp socket and its subflow sockets in accept queue can't be
> > > > released after the process exit.
> > > >
> > > > While the release of a mptcp socket in listening state, the
> > > > corresponding tcp socket will be released too. Meanwhile, the tcp
> > > > socket in the unaccept queue will be released too. However, only init
> > > > subflow is in the unaccept queue, and the joined subflow is not in the
> > > > unaccept queue, which makes the joined subflow won't be released, and
> > > > therefore the corresponding unaccepted mptcp socket will not be released
> > > > to.
> > > >
> > > > This can be reproduced easily with following steps:
> > > >
> > > > 1. create 2 namespace and veth:
> > > >    $ ip netns add mptcp-client
> > > >    $ ip netns add mptcp-server
> > > >    $ sysctl -w net.ipv4.conf.all.rp_filter=0
> > > >    $ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
> > > >    $ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
> > > >    $ ip link add red-client netns mptcp-client type veth peer red-server \
> > > >      netns mptcp-server
> > > >    $ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
> > > >    $ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
> > > >    $ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
> > > >    $ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
> > > >    $ ip -n mptcp-server link set red-server up
> > > >    $ ip -n mptcp-client link set red-client up
> > > >
> > > > 2. configure the endpoint and limit for client and server:
> > > >    $ ip -n mptcp-server mptcp endpoint flush
> > > >    $ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
> > > >    $ ip -n mptcp-client mptcp endpoint flush
> > > >    $ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
> > > >    $ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
> > > >      1 subflow
> > > >
> > > > 3. listen and accept on a port, such as 9999. The nc command we used
> > > >    here is modified, which makes it uses mptcp protocol by default.
> > > >    And the default backlog is 1:
> > > >    ip netns exec mptcp-server nc -l -k -p 9999
> > > >
> > > > 4. open another *two* terminal and connect to the server with the
> > > >    following command:
> > > >    $ ip netns exec mptcp-client nc 10.0.0.1 9999
> > > >    input something after connect, to triger the connection of the second
> > > >    subflow
> > > >
> > > > 5. exit all the nc command, and check the tcp socket in server namespace.
> > > >    And you will find that there is one tcp socket in CLOSE_WAIT state
> > > >    and can't release forever.
> > >
> > > Thank you for the report!
> > >
> > > I have a doubt WRT the above scenario: AFAICS 'nc' will accept the
> > > incoming sockets ASAP, so the unaccepted queue should be empty at
> > > shutdown, but that does not fit with your description?!?
> > >
> >
> > By default, as far as in my case, nc won't accept the new connection
> > until the first connection closes with the '-k' set. Therefor, the second
> > connection will stay in the unaccepted queue.
>
> I missed the fact you opened 2 connections. I guess that is point 4
> above. Please rephrase that sentence with something alike:
>
> ---
> 4. open another *two* terminal and use each of them to connect to the
> server with the following command:
> ...
> So that there are two established mptcp connections, with the second
> one still unaccepted.
> ---

Sounds nice! Thanks~

> >
> > > > There are some solutions that I thought:
> > > >
> > > > 1. release all unaccepted mptcp socket with mptcp_close() while the
> > > >    listening tcp socket release in mptcp_subflow_queue_clean(). This is
> > > >    what we do in this commit.
> > > > 2. release the mptcp socket with mptcp_close() in subflow_ulp_release().
> > > > 3. etc
> > > >
> > >
> > > Can you please point to a commit introducing the issue?
> > >
> >
> > In fact, I'm not sure. In my case, I found this issue in kernel 5.10.
> > And I wanted to find the solution in the upstream, but find that
> > upstream has this issue too.
> >
> > Hmm...I am curious if this issue exists in the beginning? I
> > can't find the opportunity that the joined subflow which are
> > unaccepted can be released.
>
> It looks like the problem is there since MPJ support, commit
> f296234c98a8fcec94eec80304a873f635d350ea
>

Yeah, I'll add a Fixes tag for this commit.

> >
> > > > Signed-off-by: Menglong Dong <imagedong@tencent.com>
> > > > ---
> > > >  net/mptcp/subflow.c | 4 ++++
> > > >  1 file changed, 4 insertions(+)
> > > >
> > > > diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
> > > > index c7d49fb6e7bd..e39dff5d5d84 100644
> > > > --- a/net/mptcp/subflow.c
> > > > +++ b/net/mptcp/subflow.c
> > > > @@ -1770,6 +1770,10 @@ void mptcp_subflow_queue_clean(struct sock *listener_ssk)
> > > >               msk->first = NULL;
> > > >               msk->dl_next = NULL;
> > > >               unlock_sock_fast(sk, slow);
> > > > +
> > > > +             /*  */
> > > > +             sock_hold(sk);
> > > > +             sk->sk_prot->close(sk);
> > >
> > > You can call mptcp_close() directly here.
> > >
> > > Perhaps we could as well drop the mptcp_sock_destruct() hack?
> >
> > Do you mean to call mptcp_sock_destruct() directly here?
>
> I suspect that with this change setting msk->sk_destruct to
> mptcp_sock_destruct in subflow_syn_recv_sock() is not needed anymore,
> and the relevant intialization (and callback definition) could be
> removed.

Your suspect should be right. The mptcp_subflow_queue_clean()
should always be called before unaccepted tcp socket and the
corresponding mptcp socket release.
Therefore this change can ensure that the mptcp socket will be
CLOSE state when it is released. I'll remove
mptcp_sock_destruct(), BTW.

Thanks!
Menglong Dong

>
> >
> Cheers,
>
> Paolo
>
Re: [PATCH net] net: mptcp: fix unreleased socket in accept queue
Posted by kernel test robot 3 weeks, 2 days ago
Hi,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on net/master]

url:    https://github.com/intel-lab-lkp/linux/commits/menglong8-dong-gmail-com/net-mptcp-fix-unreleased-socket-in-accept-queue/20220905-130457
base:   https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git c90714017cb3f197e71c7ff1317335b96d4d19e8
config: s390-randconfig-r015-20220905
compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project c55b41d5199d2394dd6cdb8f52180d8b81d809d4)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install s390 cross compiling tool for clang build
        # apt-get install binutils-s390x-linux-gnu
        # https://github.com/intel-lab-lkp/linux/commit/496c680afa6c8a180858e88ba2b5a6aa6d262bed
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review menglong8-dong-gmail-com/net-mptcp-fix-unreleased-socket-in-accept-queue/20220905-130457
        git checkout 496c680afa6c8a180858e88ba2b5a6aa6d262bed
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=s390 SHELL=/bin/bash net/

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   In file included from net/mptcp/subflow.c:11:
   In file included from include/linux/netdevice.h:38:
   In file included from include/net/net_namespace.h:43:
   In file included from include/linux/skbuff.h:31:
   In file included from include/linux/dma-mapping.h:10:
   In file included from include/linux/scatterlist.h:9:
   In file included from arch/s390/include/asm/io.h:75:
   include/asm-generic/io.h:547:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __raw_readb(PCI_IOBASE + addr);
                             ~~~~~~~~~~ ^
   include/asm-generic/io.h:560:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/big_endian.h:37:59: note: expanded from macro '__le16_to_cpu'
   #define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
                                                             ^
   include/uapi/linux/swab.h:102:54: note: expanded from macro '__swab16'
   #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
                                                        ^
   In file included from net/mptcp/subflow.c:11:
   In file included from include/linux/netdevice.h:38:
   In file included from include/net/net_namespace.h:43:
   In file included from include/linux/skbuff.h:31:
   In file included from include/linux/dma-mapping.h:10:
   In file included from include/linux/scatterlist.h:9:
   In file included from arch/s390/include/asm/io.h:75:
   include/asm-generic/io.h:573:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/big_endian.h:35:59: note: expanded from macro '__le32_to_cpu'
   #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
                                                             ^
   include/uapi/linux/swab.h:115:54: note: expanded from macro '__swab32'
   #define __swab32(x) (__u32)__builtin_bswap32((__u32)(x))
                                                        ^
   In file included from net/mptcp/subflow.c:11:
   In file included from include/linux/netdevice.h:38:
   In file included from include/net/net_namespace.h:43:
   In file included from include/linux/skbuff.h:31:
   In file included from include/linux/dma-mapping.h:10:
   In file included from include/linux/scatterlist.h:9:
   In file included from arch/s390/include/asm/io.h:75:
   include/asm-generic/io.h:584:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writeb(value, PCI_IOBASE + addr);
                               ~~~~~~~~~~ ^
   include/asm-generic/io.h:594:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
                                                         ~~~~~~~~~~ ^
   include/asm-generic/io.h:604:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
                                                         ~~~~~~~~~~ ^
   include/asm-generic/io.h:692:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           readsb(PCI_IOBASE + addr, buffer, count);
                  ~~~~~~~~~~ ^
   include/asm-generic/io.h:700:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           readsw(PCI_IOBASE + addr, buffer, count);
                  ~~~~~~~~~~ ^
   include/asm-generic/io.h:708:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           readsl(PCI_IOBASE + addr, buffer, count);
                  ~~~~~~~~~~ ^
   include/asm-generic/io.h:717:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           writesb(PCI_IOBASE + addr, buffer, count);
                   ~~~~~~~~~~ ^
   include/asm-generic/io.h:726:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           writesw(PCI_IOBASE + addr, buffer, count);
                   ~~~~~~~~~~ ^
   include/asm-generic/io.h:735:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           writesl(PCI_IOBASE + addr, buffer, count);
                   ~~~~~~~~~~ ^
>> net/mptcp/subflow.c:1776:24: error: too few arguments to function call, expected 2, have 1
                   sk->sk_prot->close(sk);
                   ~~~~~~~~~~~~~~~~~~   ^
   12 warnings and 1 error generated.


vim +1776 net/mptcp/subflow.c

  1726	
  1727	void mptcp_subflow_queue_clean(struct sock *listener_ssk)
  1728	{
  1729		struct request_sock_queue *queue = &inet_csk(listener_ssk)->icsk_accept_queue;
  1730		struct mptcp_sock *msk, *next, *head = NULL;
  1731		struct request_sock *req;
  1732	
  1733		/* build a list of all unaccepted mptcp sockets */
  1734		spin_lock_bh(&queue->rskq_lock);
  1735		for (req = queue->rskq_accept_head; req; req = req->dl_next) {
  1736			struct mptcp_subflow_context *subflow;
  1737			struct sock *ssk = req->sk;
  1738			struct mptcp_sock *msk;
  1739	
  1740			if (!sk_is_mptcp(ssk))
  1741				continue;
  1742	
  1743			subflow = mptcp_subflow_ctx(ssk);
  1744			if (!subflow || !subflow->conn)
  1745				continue;
  1746	
  1747			/* skip if already in list */
  1748			msk = mptcp_sk(subflow->conn);
  1749			if (msk->dl_next || msk == head)
  1750				continue;
  1751	
  1752			msk->dl_next = head;
  1753			head = msk;
  1754		}
  1755		spin_unlock_bh(&queue->rskq_lock);
  1756		if (!head)
  1757			return;
  1758	
  1759		/* can't acquire the msk socket lock under the subflow one,
  1760		 * or will cause ABBA deadlock
  1761		 */
  1762		release_sock(listener_ssk);
  1763	
  1764		for (msk = head; msk; msk = next) {
  1765			struct sock *sk = (struct sock *)msk;
  1766			bool slow;
  1767	
  1768			slow = lock_sock_fast_nested(sk);
  1769			next = msk->dl_next;
  1770			msk->first = NULL;
  1771			msk->dl_next = NULL;
  1772			unlock_sock_fast(sk, slow);
  1773	
  1774			/*  */
  1775			sock_hold(sk);
> 1776			sk->sk_prot->close(sk);
  1777		}
  1778	
  1779		/* we are still under the listener msk socket lock */
  1780		lock_sock_nested(listener_ssk, SINGLE_DEPTH_NESTING);
  1781	}
  1782	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp
#
# Automatically generated file; DO NOT EDIT.
# Linux/s390 6.0.0-rc3 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 16.0.0 (git://gitmirror/llvm_project c55b41d5199d2394dd6cdb8f52180d8b81d809d4)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=160000
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=160000
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_HAVE_KERNEL_UNCOMPRESSED=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_KERNEL_ZSTD=y
# CONFIG_KERNEL_UNCOMPRESSED is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
CONFIG_USERMODE_DRIVER=y
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting

# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
# CONFIG_FORCE_TASKS_RCU is not set
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
CONFIG_TASKS_RUDE_RCU=y
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
CONFIG_IKHEADERS=m
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_CGROUP_FAVOR_DYNMODS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_MISC is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_TIME_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
# CONFIG_EXPERT is not set
CONFIG_MULTIUSER=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters

CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_MMU=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_PGSTE=y
CONFIG_AUDIT_ARCH=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_KASAN_SHADOW_OFFSET=0x1C000000000000
CONFIG_S390=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_HAVE_LIVEPATCH=y

#
# Processor type and features
#
CONFIG_HAVE_MARCH_Z10_FEATURES=y
CONFIG_HAVE_MARCH_Z196_FEATURES=y
CONFIG_HAVE_MARCH_ZEC12_FEATURES=y
CONFIG_HAVE_MARCH_Z13_FEATURES=y
CONFIG_HAVE_MARCH_Z14_FEATURES=y
CONFIG_HAVE_MARCH_Z15_FEATURES=y
# CONFIG_MARCH_Z10 is not set
# CONFIG_MARCH_Z196 is not set
# CONFIG_MARCH_ZEC12 is not set
# CONFIG_MARCH_Z13 is not set
# CONFIG_MARCH_Z14 is not set
CONFIG_MARCH_Z15=y
# CONFIG_MARCH_Z16 is not set
CONFIG_MARCH_ZEC12_TUNE=y
# CONFIG_TUNE_DEFAULT is not set
# CONFIG_TUNE_Z10 is not set
# CONFIG_TUNE_Z196 is not set
CONFIG_TUNE_ZEC12=y
# CONFIG_TUNE_Z13 is not set
# CONFIG_TUNE_Z14 is not set
# CONFIG_TUNE_Z15 is not set
# CONFIG_TUNE_Z16 is not set
CONFIG_64BIT=y
CONFIG_COMMAND_LINE_SIZE=4096
CONFIG_SMP=y
CONFIG_NR_CPUS=64
CONFIG_HOTPLUG_CPU=y
# CONFIG_SCHED_TOPOLOGY is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KERNEL_NOBP=y
# CONFIG_RELOCATABLE is not set
# end of Processor type and features

#
# Memory setup
#
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_MAX_PHYSMEM_BITS=46
# CONFIG_CHECK_STACK is not set
# end of Memory setup

#
# I/O subsystem
#
CONFIG_QDIO=m
CONFIG_CHSC_SCH=m
CONFIG_SCM_BUS=y
CONFIG_EADM_SCH=m
# end of I/O subsystem

#
# Dump support
#
CONFIG_CRASH_DUMP=y
# end of Dump support

CONFIG_CCW=y

#
# Virtualization
#
# CONFIG_PROTECTED_VIRTUALIZATION_GUEST is not set
# CONFIG_PFAULT is not set
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
CONFIG_APPLDATA_MEM=m
CONFIG_APPLDATA_OS=m
# CONFIG_APPLDATA_NET_SUM is not set
CONFIG_S390_HYPFS_FS=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_KVM_ASYNC_PF_SYNC=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_HAVE_KVM_INVALID_WAKEUPS=y
CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_S390_UCONTROL is not set
# CONFIG_S390_GUEST is not set
# end of Virtualization

#
# Selftests
#
# end of Selftests

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_ARCH_32BIT_USTAT_F_TINODE=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_MMU_GATHER_NO_GATHER=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_IDLE=y
CONFIG_ARCH_HAS_SCALED_CPUTIME=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ALTERNATE_USER_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_CLONE_BACKWARDS2=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_HAS_VDSO_DATA=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS_NONE is not set
CONFIG_MODULE_COMPRESS_GZIP=y
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_DECOMPRESS=y
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_MQ is not set
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
CONFIG_MQ_IOSCHED_KYBER=m
CONFIG_IOSCHED_BFQ=m
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK=y
CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_READ_TRYLOCK=y
CONFIG_ARCH_INLINE_READ_LOCK=y
CONFIG_ARCH_INLINE_READ_LOCK_BH=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_READ_UNLOCK=y
CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_WRITE_TRYLOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_SPIN_TRYLOCK=y
CONFIG_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_INLINE_SPIN_LOCK=y
CONFIG_INLINE_SPIN_LOCK_BH=y
CONFIG_INLINE_SPIN_LOCK_IRQ=y
CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_INLINE_SPIN_UNLOCK_BH=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_READ_TRYLOCK=y
CONFIG_INLINE_READ_LOCK=y
CONFIG_INLINE_READ_LOCK_BH=y
CONFIG_INLINE_READ_LOCK_IRQ=y
CONFIG_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_BH=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_WRITE_TRYLOCK=y
CONFIG_INLINE_WRITE_LOCK=y
CONFIG_INLINE_WRITE_LOCK_BH=y
CONFIG_INLINE_WRITE_LOCK_IRQ=y
CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_BH=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lz4"
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="z3fold"
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=m
CONFIG_ZSMALLOC_STAT=y

#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_PHYS_MAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_READ_ONLY_THP_FOR_FS=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
# CONFIG_MEM_SOFT_DIRTY is not set
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
CONFIG_TLS_TOE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_ESPINTCP=y
CONFIG_IUCV=y
CONFIG_AFIUCV=m
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=y
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE_COMMON=y
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_ESPINTCP=y
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
# CONFIG_IPV6_PIMSM_V2 is not set
CONFIG_IPV6_SEG6_LWTUNNEL=y
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
CONFIG_MPTCP=y
CONFIG_MPTCP_IPV6=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
CONFIG_BPFILTER=y
CONFIG_IP_DCCP=y

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
# end of DCCP CCIDs Configuration

CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE=y
# CONFIG_SCTP_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_RDS=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
# CONFIG_TIPC is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=m
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
# CONFIG_6LOWPAN_NHC_FRAGMENT is not set
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
# CONFIG_6LOWPAN_NHC_ROUTING is not set
CONFIG_6LOWPAN_NHC_UDP=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
# CONFIG_6LOWPAN_GHC_ICMPV6 is not set
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
# CONFIG_IEEE802154_SOCKET is not set
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=m
# CONFIG_VSOCKETS_LOOPBACK is not set
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
# CONFIG_MPLS_IPTUNNEL is not set
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=m
# CONFIG_QRTR_SMD is not set
CONFIG_QRTR_TUN=m
# CONFIG_QRTR_MHI is not set
# CONFIG_NET_NCSI is not set
# CONFIG_PCPU_DEV_REFCNT is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options

CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
# CONFIG_CAN_GW is not set
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
# CONFIG_AF_RXRPC is not set
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=m
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=m
# CONFIG_NFC_NCI_UART is not set
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_VIRTUAL_NCI is not set
CONFIG_NFC_FDP=m
CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_I2C=m
# CONFIG_NFC_PN532_UART is not set
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
CONFIG_NFC_ST21NFCA=m
CONFIG_NFC_ST21NFCA_I2C=m
# CONFIG_NFC_ST_NCI_I2C is not set
# CONFIG_NFC_NXP_NCI is not set
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
CONFIG_NFC_S3FWRN82_UART=m
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
# CONFIG_LWTUNNEL_BPF is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
# CONFIG_FAILOVER is not set
# CONFIG_ETHTOOL_NETLINK is not set

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y

#
# PC-card bridges
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_IRQ=y
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_EP=y
# end of Bus devices

CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=y
# CONFIG_GNSS_MTK_SERIAL is not set
CONFIG_GNSS_SIRF_SERIAL=y
# CONFIG_GNSS_UBX_SERIAL is not set
CONFIG_MTD=y
CONFIG_MTD_TESTS=m

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=m
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=y

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=m
CONFIG_NFTL=y
# CONFIG_NFTL_RW is not set
CONFIG_INFTL=m
CONFIG_RFD_FTL=y
CONFIG_SSFDC=m
CONFIG_SM_FTL=m
# CONFIG_MTD_OOPS is not set
CONFIG_MTD_SWAP=y
CONFIG_MTD_PARTITIONED_MASTER=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_RAW_NAND=m

#
# Raw/parallel NAND flash controllers
#

#
# Misc
#
CONFIG_MTD_NAND_NANDSIM=m

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_UBI is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_CDROM=m
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEF_COMP_LZORLE is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
CONFIG_ZRAM_DEF_COMP_LZO=y
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="lzo"
# CONFIG_ZRAM_WRITEBACK is not set
CONFIG_ZRAM_MEMORY_TRACKING=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=m
CONFIG_DRBD_FAULT_INJECTION=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# S/390 block device drivers
#
# CONFIG_DCSSBLK is not set
# CONFIG_DASD is not set
CONFIG_SCM_BLOCK=m
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_UBLK=m

#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_TCP=y
# CONFIG_NVME_AUTH is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
# CONFIG_DUMMY_IRQ is not set
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
# CONFIG_OPEN_DICE is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=m
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module (requires I2C)
#
CONFIG_ALTERA_STAPL=m
# CONFIG_ECHO is not set
CONFIG_PVPANIC=y
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
CONFIG_CHR_DEV_ST=m
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports

# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

# CONFIG_MD is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
# CONFIG_TCM_PSCSI is not set
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
# CONFIG_ISCSI_TARGET is not set
# CONFIG_NETDEVICES is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=m

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=m
CONFIG_KEYBOARD_ADP5588=m
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_QT1050=m
CONFIG_KEYBOARD_QT1070=m
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=m
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=m
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_CAP11XX=m
CONFIG_KEYBOARD_CYPRESS_SF=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADC is not set
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_QWIIC=m
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_ADC=y
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_BU21029=m
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
CONFIG_TOUCHSCREEN_CY8CTMA140=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
# CONFIG_TOUCHSCREEN_EXC3000 is not set
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GOODIX is not set
CONFIG_TOUCHSCREEN_HIDEEP=m
CONFIG_TOUCHSCREEN_HYCON_HY46XX=m
# CONFIG_TOUCHSCREEN_ILI210X is not set
CONFIG_TOUCHSCREEN_ILITEK=m
CONFIG_TOUCHSCREEN_S6SY761=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MSG2638 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_IMAGIS is not set
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
CONFIG_TOUCHSCREEN_RM_TS=m
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMFTS=m
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_TOUCHSCREEN_IQS5XX=m
CONFIG_TOUCHSCREEN_ZINITIX=m
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=m
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=m
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=m
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LDISC_AUTOLOAD is not set
CONFIG_N_GSM=y
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_IUCV is not set
CONFIG_RPMSG_TTY=m
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
# CONFIG_CARDMAN_4040 is not set
CONFIG_SCR24X=m
# end of PCMCIA character devices

CONFIG_DEVMEM=y
# CONFIG_HANGCHECK_TIMER is not set

#
# S/390 character device drivers
#
CONFIG_TN3270=y
CONFIG_TN3270_TTY=m
CONFIG_TN3270_FS=m
CONFIG_TN3215=y
# CONFIG_TN3215_CONSOLE is not set
# CONFIG_SCLP_TTY is not set
CONFIG_SCLP_VT220_TTY=y
CONFIG_SCLP_VT220_CONSOLE=y
# CONFIG_HMC_DRV is not set
CONFIG_SCLP_OFB=y
CONFIG_S390_UV_UAPI=m
CONFIG_S390_TAPE=y

#
# S/390 tape hardware support
#
CONFIG_S390_TAPE_34XX=m
# CONFIG_S390_TAPE_3590 is not set
CONFIG_VMLOGRDR=y
CONFIG_VMCP=y
CONFIG_VMCP_CMA_SIZE=4
# CONFIG_MONREADER is not set
# CONFIG_MONWRITER is not set
# CONFIG_S390_VMUR is not set
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_OF=m
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_GPMUX=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_DEMUX_PINCTRL=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=m
# end of I2C Algorithms

CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# end of I2C support

CONFIG_I3C=m
CONFIG_SPMI=m
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=m
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08=m

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_MAX730X=m

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=m
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# end of MFD GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers

CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_GENERIC_ADC_BATTERY is not set
CONFIG_IP5XXX_POWER=m
CONFIG_TEST_POWER=m
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_CW2015=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=m
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_MAX17040=m
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
CONFIG_CHARGER_MAX77976=m
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=m
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_BQ25980=m
# CONFIG_CHARGER_BQ256XX is not set
CONFIG_BATTERY_GAUGE_LTC2941=m
# CONFIG_BATTERY_RT5033 is not set
CONFIG_CHARGER_RT9455=m
CONFIG_CHARGER_BD99954=m
# CONFIG_BATTERY_UG3105 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_GOV_STEP_WISE is not set
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CPU_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
CONFIG_THERMAL_EMULATION=y
# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ZIIRAVE_WATCHDOG=m
CONFIG_MEN_A21_WDT=y
CONFIG_DIAG288_WATCHDOG=y
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

#
# Graphics support
#

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
CONFIG_UHID=m
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_COUGAR=y
CONFIG_HID_MACALLY=m
CONFIG_HID_CMEDIA=y
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=y
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=y
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_VIVALDI is not set
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=m
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_XIAOMI=y
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=m
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=m
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
CONFIG_HID_LENOVO=y
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
# CONFIG_NINTENDO_FF is not set
CONFIG_HID_NTI=y
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PLAYSTATION=y
# CONFIG_PLAYSTATION_FF is not set
CONFIG_HID_RAZER=m
CONFIG_HID_PRIMAX=y
CONFIG_HID_SAITEK=m
CONFIG_HID_SEMITEK=m
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=m
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
# CONFIG_HID_THINGM is not set
CONFIG_HID_UDRAW_PS3=y
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=m
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_ALPS=y
# end of Special HID drivers

#
# I2C HID support
#
CONFIG_I2C_HID_OF=m
# CONFIG_I2C_HID_OF_ELAN is not set
CONFIG_I2C_HID_OF_GOODIX=m
# end of I2C HID support

CONFIG_I2C_HID_CORE=m
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFS_BSG=y
# CONFIG_SCSI_UFS_CRYPTO is not set
# CONFIG_SCSI_UFS_HPB is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_AN30259A=m
CONFIG_LEDS_AW2013=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
# CONFIG_LEDS_LP55XX_COMMON is not set
CONFIG_LEDS_LP8860=m
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_IS31FL319X=m
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=y
# CONFIG_LEDS_TI_LMU_COMMON is not set

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=m
CONFIG_LEDS_AS3645A=m
CONFIG_LEDS_KTD2692=m
CONFIG_LEDS_LM3601X=m
# CONFIG_LEDS_RT4505 is not set
# CONFIG_LEDS_RT8515 is not set
CONFIG_LEDS_SGM3140=m

#
# RGB LED drivers
#

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set

#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_FSL_EDMA=y
CONFIG_INTEL_IDMA64=y
CONFIG_QCOM_HIDMA=y

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_VDPA is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=m
CONFIG_VDPA=y
CONFIG_VDPA_SIM=y
CONFIG_VDPA_SIM_NET=y
CONFIG_VDPA_SIM_BLOCK=m
CONFIG_VDPA_USER=m
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST_RING=y
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

CONFIG_IOMMU_DEBUGFS=y
# CONFIG_S390_CCW_IOMMU is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CHAR=m
CONFIG_RPMSG_CTRL=m
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=m
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=m

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_FSA9480=m
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_USBC_TUSB320=m
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=m
# CONFIG_IIO_BUFFER_DMAENGINE is not set
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=m
# CONFIG_IIO_TRIGGERED_EVENT is not set

#
# Accelerometers
#
CONFIG_ADXL313=m
CONFIG_ADXL313_I2C=m
CONFIG_ADXL345=m
CONFIG_ADXL345_I2C=m
# CONFIG_ADXL355_I2C is not set
CONFIG_ADXL367=m
CONFIG_ADXL367_I2C=m
CONFIG_ADXL372=m
CONFIG_ADXL372_I2C=m
CONFIG_BMA180=m
# CONFIG_BMA400 is not set
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_DA280=m
CONFIG_DA311=m
CONFIG_DMARD06=m
# CONFIG_DMARD09 is not set
CONFIG_DMARD10=m
# CONFIG_FXLS8962AF_I2C is not set
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_KXSD9=m
CONFIG_KXSD9_I2C=m
CONFIG_KXCJK1013=m
# CONFIG_MC3230 is not set
# CONFIG_MMA7455_I2C is not set
CONFIG_MMA7660=m
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MXC4005=m
# CONFIG_MXC6255 is not set
# CONFIG_STK8312 is not set
CONFIG_STK8BA50=m
# end of Accelerometers

#
# Analog to digital converters
#
# CONFIG_AD7091R5 is not set
CONFIG_AD7291=m
CONFIG_AD799X=m
# CONFIG_ENVELOPE_DETECTOR is not set
# CONFIG_HX711 is not set
CONFIG_INA2XX_ADC=m
CONFIG_LTC2471=m
# CONFIG_LTC2485 is not set
# CONFIG_LTC2497 is not set
CONFIG_MAX1363=m
CONFIG_MAX9611=m
CONFIG_MCP3422=m
CONFIG_NAU7802=m
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_SPMI_IADC=m
# CONFIG_QCOM_SPMI_VADC is not set
CONFIG_QCOM_SPMI_ADC5=m
CONFIG_SD_ADC_MODULATOR=y
# CONFIG_TI_ADC081C is not set
CONFIG_TI_ADS1015=m
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends

#
# Amplifiers
#
# CONFIG_HMC425 is not set
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=m
# end of Capacitance to digital converters

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_ATLAS_EZO_SENSOR is not set
CONFIG_BME680=m
CONFIG_BME680_I2C=m
# CONFIG_CCS811 is not set
# CONFIG_IAQCORE is not set
CONFIG_PMS7003=m
# CONFIG_SCD30_CORE is not set
CONFIG_SCD4X=m
CONFIG_SENSIRION_SGP30=m
CONFIG_SENSIRION_SGP40=m
CONFIG_SPS30=y
CONFIG_SPS30_I2C=m
CONFIG_SPS30_SERIAL=y
CONFIG_SENSEAIR_SUNRISE_CO2=m
CONFIG_VZ89X=m
# end of Chemical Sensors

#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common

#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Digital to analog converters
#
CONFIG_AD5064=m
# CONFIG_AD5380 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5593R is not set
CONFIG_AD5686=m
CONFIG_AD5696_I2C=m
# CONFIG_DPOT_DAC is not set
# CONFIG_DS4424 is not set
CONFIG_M62332=m
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
CONFIG_TI_DAC5571=m
# end of Digital to analog converters

#
# IIO dummy driver
#
CONFIG_IIO_SIMPLE_DUMMY=m
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
# end of IIO dummy driver

#
# Filters
#
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
# CONFIG_IIO_ST_GYRO_3AXIS is not set
CONFIG_ITG3200=m
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4404 is not set
CONFIG_MAX30100=m
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
# CONFIG_AM2315 is not set
CONFIG_DHT11=m
CONFIG_HDC100X=m
CONFIG_HDC2010=m
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
# CONFIG_HTU21 is not set
CONFIG_SI7005=m
CONFIG_SI7020=m
# end of Humidity sensors

#
# Inertial measurement units
#
# CONFIG_BMI160_I2C is not set
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
# CONFIG_KMX61 is not set
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_IIO_ST_LSM6DSX is not set
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units

#
# Light sensors
#
CONFIG_ADJD_S311=m
CONFIG_ADUX1020=m
CONFIG_AL3010=m
CONFIG_AL3320A=m
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
# CONFIG_AS73211 is not set
# CONFIG_BH1750 is not set
CONFIG_BH1780=m
# CONFIG_CM32181 is not set
CONFIG_CM3232=m
CONFIG_CM3323=m
CONFIG_CM3605=m
# CONFIG_CM36651 is not set
# CONFIG_GP2AP002 is not set
CONFIG_GP2AP020A00F=m
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
# CONFIG_ISL29125 is not set
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_LTR501=m
# CONFIG_LV0104CS is not set
CONFIG_MAX44000=m
# CONFIG_MAX44009 is not set
CONFIG_NOA1305=m
# CONFIG_OPT3001 is not set
CONFIG_PA12203001=m
# CONFIG_SI1133 is not set
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
# CONFIG_SENSORS_TSL2563 is not set
CONFIG_TSL2583=m
# CONFIG_TSL2591 is not set
# CONFIG_TSL2772 is not set
CONFIG_TSL4531=m
CONFIG_US5182D=m
# CONFIG_VCNL4000 is not set
CONFIG_VCNL4035=m
# CONFIG_VEML6030 is not set
CONFIG_VEML6070=m
CONFIG_VL6180=m
CONFIG_ZOPT2201=m
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8974=m
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_MAG3110=m
# CONFIG_MMC35240 is not set
CONFIG_IIO_ST_MAGN_3AXIS=m
# CONFIG_IIO_ST_MAGN_I2C_3AXIS is not set
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_RM3100_I2C is not set
CONFIG_YAMAHA_YAS530=m
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=m
# end of Multiplexers

#
# Inclinometer sensors
#
# end of Inclinometer sensors

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone

#
# Linear and angular position sensors
#
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5110=m
CONFIG_AD5272=m
CONFIG_DS1803=m
# CONFIG_MAX5432 is not set
CONFIG_MCP4018=m
CONFIG_MCP4531=m
# CONFIG_TPL0102 is not set
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_DLHL60D=m
# CONFIG_DPS310 is not set
CONFIG_HP03=m
CONFIG_ICP10100=m
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
CONFIG_MPL3115=m
# CONFIG_MS5611 is not set
# CONFIG_MS5637 is not set
CONFIG_IIO_ST_PRESS=m
# CONFIG_IIO_ST_PRESS_I2C is not set
# CONFIG_T5403 is not set
CONFIG_HP206C=m
# CONFIG_ZPA2326 is not set
# end of Pressure sensors

#
# Lightning sensors
#
# end of Lightning sensors

#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
CONFIG_LIDAR_LITE_V2=m
CONFIG_MB1232=m
CONFIG_PING=m
CONFIG_RFD77402=m
# CONFIG_SRF04 is not set
CONFIG_SX_COMMON=m
CONFIG_SX9310=m
CONFIG_SX9324=m
CONFIG_SX9360=m
CONFIG_SX9500=m
CONFIG_SRF08=m
# CONFIG_VCNL3020 is not set
CONFIG_VL53L0X_I2C=m
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# end of Resolver to digital converters

#
# Temperature sensors
#
# CONFIG_MLX90614 is not set
# CONFIG_MLX90632 is not set
# CONFIG_TMP006 is not set
CONFIG_TMP007=m
# CONFIG_TMP117 is not set
# CONFIG_TSYS01 is not set
# CONFIG_TSYS02D is not set
# end of Temperature sensors

# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
# end of IRQ chip support

# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_CAN_TRANSCEIVER=y

#
# PHY drivers for Broadcom platforms
#
# end of PHY drivers for Broadcom platforms
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_DTPM=y
CONFIG_RAS=y

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_DAX=y
CONFIG_DEV_DAX=m
# CONFIG_DEV_DAX_KMEM is not set
# CONFIG_NVMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# end of HW tracing support

CONFIG_FPGA=y
# CONFIG_ALTERA_PR_IP_CORE is not set
CONFIG_FPGA_BRIDGE=y
CONFIG_FPGA_REGION=y
# CONFIG_OF_FPGA_REGION is not set
# CONFIG_FSI is not set
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=m
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=m
CONFIG_SIOX_BUS_GPIO=m
CONFIG_SLIMBUS=y
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=m
CONFIG_INTERRUPT_CNT=m
# CONFIG_MOST is not set
# CONFIG_PECI is not set
CONFIG_HTE=y
# end of Device Drivers

#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=m
# CONFIG_F2FS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_ERROR_INJECTION=y
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
CONFIG_NTFS3_FS=y
# CONFIG_NTFS3_64BIT_CLUSTER is not set
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=m
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y

#
# No trust source selected!
#
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_KEY_NOTIFICATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization

CONFIG_CC_HAS_RANDSTRUCT=y
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=m

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_SM2 is not set
CONFIG_CRYPTO_CURVE25519=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XCTR=y
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_NHPOLY1305=m
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_HCTR2=y
CONFIG_CRYPTO_ESSIV=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_S390=m
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA512_S390=y
CONFIG_CRYPTO_SHA1_S390=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA256_S390=m
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SHA3_256_S390 is not set
# CONFIG_CRYPTO_SHA3_512_S390 is not set
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_GHASH_S390=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_AES_S390=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES_S390 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA_S390=m
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_SM4=m
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_ZCRYPT is not set
CONFIG_S390_PRNG=m
CONFIG_CRYPTO_DEV_ATMEL_I2C=m
CONFIG_CRYPTO_DEV_ATMEL_ECC=m
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_CRYPTO_DEV_CCREE=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
# CONFIG_PKCS7_MESSAGE_PARSER is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_LINEAR_RANGES=m
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=m
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=m
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_ZLIB_DFLTCC is not set
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
CONFIG_DMA_RESTRICTED_POOL=y
CONFIG_DMA_CMA=y
CONFIG_DMA_PERNUMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_PERCENTAGE=10
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CMA_SIZE_SEL_MIN=y
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMA_API_DEBUG_SG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_SG_POOL=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_SBITMAP=y
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
# CONFIG_SYMBOLIC_ERRNAME is not set
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

# CONFIG_DEBUG_KERNEL is not set

#
# Compile-time checks and compiler options
#
CONFIG_FRAME_WARN=8192
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
CONFIG_DEBUG_FS_DISALLOW_MOUNT=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_CC_HAS_UBSAN_ARRAY_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ARRAY_BOUNDS=y
CONFIG_UBSAN_LOCAL_BOUNDS=y
# CONFIG_UBSAN_SHIFT is not set
CONFIG_UBSAN_UNREACHABLE=y
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
CONFIG_TEST_UBSAN=m
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_SHRINKER_DEBUG=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
CONFIG_KASAN_OUTLINE=y
# CONFIG_KASAN_INLINE is not set
CONFIG_KASAN_STACK=y
CONFIG_KASAN_VMALLOC=y
CONFIG_KASAN_MODULE_TEST=m
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_WW_MUTEX_SELFTEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set

#
# Debug kernel data structures
#
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures

#
# RCU Debugging
#
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# end of RCU Debugging

CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_NOP_MCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_HWLAT_TRACER=y
CONFIG_OSNOISE_TRACER=y
CONFIG_TIMERLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_BRANCH_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_KPROBE_EVENTS is not set
CONFIG_DYNAMIC_EVENTS=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_SYNTH_EVENTS=y
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_FTRACE_RECORD_RECURSION=y
CONFIG_FTRACE_RECORD_RECURSION_SIZE=128
# CONFIG_RING_BUFFER_RECORD_RECURSION is not set
# CONFIG_GCOV_PROFILE_FTRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_STARTUP_TEST=y
CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS=y
CONFIG_PREEMPTIRQ_DELAY_TEST=m
CONFIG_SYNTH_EVENT_GEN_TEST=y
CONFIG_DA_MON_EVENTS=y
CONFIG_DA_MON_EVENTS_ID=y
CONFIG_RV=y
CONFIG_RV_MON_WWNR=y
CONFIG_RV_REACTORS=y
CONFIG_RV_REACT_PRINTK=y
# CONFIG_RV_REACT_PANIC is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set

#
# s390 Debugging
#
CONFIG_EARLY_PRINTK=y
# end of s390 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=m
# CONFIG_TEST_MIN_HEAP is not set
CONFIG_TEST_DIV64=m
CONFIG_REED_SOLOMON_TEST=m
CONFIG_ATOMIC64_SELFTEST=m
CONFIG_TEST_HEXDUMP=m
CONFIG_STRING_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_STRSCPY=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
CONFIG_TEST_BITMAP=y
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_SIPHASH=y
CONFIG_TEST_IDA=m
# CONFIG_TEST_LKM is not set
CONFIG_TEST_BITOPS=m
# CONFIG_TEST_VMALLOC is not set
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_MEMCAT_P=y
# CONFIG_TEST_MEMINIT is not set
CONFIG_TEST_FREE_PAGES=y
# end of Kernel Testing and Coverage
# end of Kernel hacking
Re: net: mptcp: fix unreleased socket in accept queue: Tests Results
Posted by MPTCP CI 3 weeks, 2 days ago
Hi Menglong,

Thank you for your modifications, that's great!

Our CI did some validations and here is its report:

- KVM Validation: Script error! ❓:
  - :
  - Task: https://cirrus-ci.com/task/4644571920465920
  - Summary: https://api.cirrus-ci.com/v1/artifact/task/4644571920465920/summary/summary.txt

- KVM Validation: Script error! ❓:
  - :
  - Task: https://cirrus-ci.com/task/5770471827308544
  - Summary: https://api.cirrus-ci.com/v1/artifact/task/5770471827308544/summary/summary.txt

Initiator: Patchew Applier
Commits: https://github.com/multipath-tcp/mptcp_net-next/commits/447ae1cfe0f8


If there are some issues, you can reproduce them using the same environment as
the one used by the CI thanks to a docker image, e.g.:

    $ cd [kernel source code]
    $ docker run -v "${PWD}:${PWD}:rw" -w "${PWD}" --privileged --rm -it \
        --pull always mptcp/mptcp-upstream-virtme-docker:latest \
        auto-debug

For more details:

    https://github.com/multipath-tcp/mptcp-upstream-virtme-docker


Please note that despite all the efforts that have been already done to have a
stable tests suite when executed on a public CI like here, it is possible some
reported issues are not due to your modifications. Still, do not hesitate to
help us improve that ;-)

Cheers,
MPTCP GH Action bot
Bot operated by Matthieu Baerts (Tessares)
Re: net: mptcp: fix unreleased socket in accept queue: Build Failure
Posted by MPTCP CI 3 weeks, 2 days ago
Hi Menglong,

Thank you for your modifications, that's great!

But sadly, our CI spotted some issues with it when trying to build it.

You can find more details there:

  https://patchwork.kernel.org/project/mptcp/patch/20220905050400.1136241-1-imagedong@tencent.com/
  https://github.com/multipath-tcp/mptcp_net-next/actions/runs/2990914235

Status: failure
Initiator: MPTCPimporter
Commits: https://github.com/multipath-tcp/mptcp_net-next/commits/447ae1cfe0f8

Feel free to reply to this email if you cannot access logs, if you need
some support to fix the error, if this doesn't seem to be caused by your
modifications or if the error is a false positive one.

Cheers,
MPTCP GH Action bot
Bot operated by Matthieu Baerts (Tessares)