From: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Add calc_mode for dirtyrate statistics retured by
virsh domstats --dirtyrate api, also add vcpu dirtyrate
if dirty-ring mode was used in last measurement.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
---
src/libvirt-domain.c | 6 +++++
src/qemu/qemu_driver.c | 22 +++++++++++++++---
src/qemu/qemu_monitor.h | 10 +++++++++
src/qemu/qemu_monitor_json.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 88 insertions(+), 3 deletions(-)
diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
index 7be4e02..a197618 100644
--- a/src/libvirt-domain.c
+++ b/src/libvirt-domain.c
@@ -11980,6 +11980,12 @@ virConnectGetDomainCapabilities(virConnectPtr conn,
* "dirtyrate.megabytes_per_second" - the calculated memory dirty rate in
* MiB/s as long long. It is produced
* only if the calc_status is measured.
+ * "dirtyrate.calc_mode" - the calculation mode used last measurement, either
+ * of these 3 'page-sampling,dirty-bitmap,dirty-ring'
+ * values returned.
+ * "dirtyrate.vcpu.<num>.megabytes_per_second" - the calculated memory dirty
+ * rate for a virtual cpu as
+ * unsigned long long.
*
* Note that entire stats groups or individual stat fields may be missing from
* the output in case they are not supported by the given hypervisor, are not
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 3297513..de2fdf7 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -18556,11 +18556,27 @@ qemuDomainGetStatsDirtyRate(virQEMUDriver *driver,
"dirtyrate.calc_period") < 0)
return -1;
- if ((info.status == VIR_DOMAIN_DIRTYRATE_MEASURED) &&
- virTypedParamListAddLLong(params, info.dirtyRate,
- "dirtyrate.megabytes_per_second") < 0)
+ if (virTypedParamListAddString(params,
+ qemuMonitorDirtyRateCalcModeTypeToString(info.mode),
+ "dirtyrate.calc_mode") < 0)
return -1;
+ if (info.status == VIR_DOMAIN_DIRTYRATE_MEASURED) {
+ if (virTypedParamListAddLLong(params, info.dirtyRate,
+ "dirtyrate.megabytes_per_second") < 0)
+ return -1;
+
+ if (info.mode == QEMU_MONITOR_DIRTYRATE_CALC_MODE_DIRTY_RING) {
+ int i;
+ for (i = 0; i < info.nvcpus; i++) {
+ if (virTypedParamListAddULLong(params, info.rates[i].value,
+ "dirtyrate.vcpu.%d.megabytes_per_second",
+ info.rates[i].index) < 0)
+ return -1;
+ }
+ }
+ }
+
return 0;
}
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index 053479b..2c0eed5 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -1553,6 +1553,12 @@ qemuMonitorStartDirtyRateCalc(qemuMonitor *mon,
int seconds,
qemuMonitorDirtyRateCalcMode mode);
+typedef struct _qemuMonitorDirtyRateVcpu qemuMonitorDirtyRateVcpu;
+struct _qemuMonitorDirtyRateVcpu {
+ int index; /* virtual cpu index */
+ unsigned long long value; /* virtual cpu dirty page rate in MB/s */
+};
+
typedef struct _qemuMonitorDirtyRateInfo qemuMonitorDirtyRateInfo;
struct _qemuMonitorDirtyRateInfo {
int status; /* the status of last dirtyrate calculation,
@@ -1560,6 +1566,10 @@ struct _qemuMonitorDirtyRateInfo {
int calcTime; /* the period of dirtyrate calculation */
long long startTime; /* the start time of dirtyrate calculation */
long long dirtyRate; /* the dirtyrate in MiB/s */
+ qemuMonitorDirtyRateCalcMode mode; /* calculation mode used in
+ last measurement */
+ size_t nvcpus; /* number of virtual cpu */
+ qemuMonitorDirtyRateVcpu *rates; /* array of dirty page rate */
};
int
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index da9a4d9..a07f8c9 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -8782,11 +8782,45 @@ VIR_ENUM_IMPL(qemuMonitorDirtyRateStatus,
"measured");
static int
+qemuMonitorJSONExtractVcpuDirtyRate(virJSONValue *data,
+ qemuMonitorDirtyRateInfo *info)
+{
+ size_t nvcpus;
+ int i;
+
+ nvcpus = virJSONValueArraySize(data);
+ info->nvcpus = nvcpus;
+ info->rates = g_new0(qemuMonitorDirtyRateVcpu, nvcpus);
+
+ for (i = 0; i < nvcpus; i++) {
+ virJSONValue *entry = virJSONValueArrayGet(data, i);
+ if (virJSONValueObjectGetNumberInt(entry, "id",
+ &info->rates[i].index) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate reply was missing 'id' data"));
+ return -1;
+ }
+
+ if (virJSONValueObjectGetNumberUlong(entry, "dirty-rate",
+ &info->rates[i].value) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate reply was missing 'dirty-rate' data"));
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int
qemuMonitorJSONExtractDirtyRateInfo(virJSONValue *data,
qemuMonitorDirtyRateInfo *info)
{
const char *statusstr;
+ const char *modestr;
int status;
+ int mode;
+ virJSONValue *rates = NULL;
if (!(statusstr = virJSONValueObjectGetString(data, "status"))) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
@@ -8823,6 +8857,25 @@ qemuMonitorJSONExtractDirtyRateInfo(virJSONValue *data,
return -1;
}
+ if ((modestr = virJSONValueObjectGetString(data, "mode"))) {
+ if ((mode = qemuMonitorDirtyRateCalcModeTypeFromString(modestr)) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Unknown dirty page rate calculation mode: %s"), modestr);
+ return -1;
+ }
+ info->mode = mode;
+ } else {
+ info->mode = QEMU_MONITOR_DIRTYRATE_CALC_MODE_PAGE_SAMPLING;
+ }
+
+ if ((rates = virJSONValueObjectGetArray(data, "vcpu-dirty-rate"))) {
+ if (qemuMonitorJSONExtractVcpuDirtyRate(rates, info) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate parsing 'vcpu-dirty-rate' in failure"));
+ return -1;
+ }
+ }
+
return 0;
}
--
1.8.3.1
On 2/20/22 14:28, huangy81@chinatelecom.cn wrote:
> From: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
>
> Add calc_mode for dirtyrate statistics retured by
> virsh domstats --dirtyrate api, also add vcpu dirtyrate
> if dirty-ring mode was used in last measurement.
>
> Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
> ---
> src/libvirt-domain.c | 6 +++++
> src/qemu/qemu_driver.c | 22 +++++++++++++++---
> src/qemu/qemu_monitor.h | 10 +++++++++
> src/qemu/qemu_monitor_json.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 88 insertions(+), 3 deletions(-)
>
> diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
> index 7be4e02..a197618 100644
> --- a/src/libvirt-domain.c
> +++ b/src/libvirt-domain.c
> @@ -11980,6 +11980,12 @@ virConnectGetDomainCapabilities(virConnectPtr conn,
> * "dirtyrate.megabytes_per_second" - the calculated memory dirty rate in
> * MiB/s as long long. It is produced
> * only if the calc_status is measured.
> + * "dirtyrate.calc_mode" - the calculation mode used last measurement, either
> + * of these 3 'page-sampling,dirty-bitmap,dirty-ring'
> + * values returned.
> + * "dirtyrate.vcpu.<num>.megabytes_per_second" - the calculated memory dirty
> + * rate for a virtual cpu as
> + * unsigned long long.
> *
> * Note that entire stats groups or individual stat fields may be missing from
> * the output in case they are not supported by the given hypervisor, are not
> diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
> index 3297513..de2fdf7 100644
> --- a/src/qemu/qemu_driver.c
> +++ b/src/qemu/qemu_driver.c
> @@ -18556,11 +18556,27 @@ qemuDomainGetStatsDirtyRate(virQEMUDriver *driver,
> "dirtyrate.calc_period") < 0)
> return -1;
>
> - if ((info.status == VIR_DOMAIN_DIRTYRATE_MEASURED) &&
> - virTypedParamListAddLLong(params, info.dirtyRate,
> - "dirtyrate.megabytes_per_second") < 0)
> + if (virTypedParamListAddString(params,
> + qemuMonitorDirtyRateCalcModeTypeToString(info.mode),
> + "dirtyrate.calc_mode") < 0)
> return -1;
>
> + if (info.status == VIR_DOMAIN_DIRTYRATE_MEASURED) {
> + if (virTypedParamListAddLLong(params, info.dirtyRate,
> + "dirtyrate.megabytes_per_second") < 0)
> + return -1;
> +
> + if (info.mode == QEMU_MONITOR_DIRTYRATE_CALC_MODE_DIRTY_RING) {
> + int i;
Since info.nvcpus is size_t so must be i. We are not guaranteed that
size_t == int.
> + for (i = 0; i < info.nvcpus; i++) {
> + if (virTypedParamListAddULLong(params, info.rates[i].value,
> + "dirtyrate.vcpu.%d.megabytes_per_second",
> + info.rates[i].index) < 0)
> + return -1;
> + }
> + }
> + }
> +
> return 0;
> }
>
> diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
> index 053479b..2c0eed5 100644
> --- a/src/qemu/qemu_monitor.h
> +++ b/src/qemu/qemu_monitor.h
> @@ -1553,6 +1553,12 @@ qemuMonitorStartDirtyRateCalc(qemuMonitor *mon,
> int seconds,
> qemuMonitorDirtyRateCalcMode mode);
>
> +typedef struct _qemuMonitorDirtyRateVcpu qemuMonitorDirtyRateVcpu;
> +struct _qemuMonitorDirtyRateVcpu {
> + int index; /* virtual cpu index */
This makes our syntax-check report an error, because it thinks that
'index' is used to access an array (which must then be type of size_t
because that's the only type which is guaranteed to be big enough to
address individual bytes in memory). Let me change the name to 'idx'.
> + unsigned long long value; /* virtual cpu dirty page rate in MB/s */
> +};
> +
> typedef struct _qemuMonitorDirtyRateInfo qemuMonitorDirtyRateInfo;
> struct _qemuMonitorDirtyRateInfo {
> int status; /* the status of last dirtyrate calculation,
> @@ -1560,6 +1566,10 @@ struct _qemuMonitorDirtyRateInfo {
> int calcTime; /* the period of dirtyrate calculation */
> long long startTime; /* the start time of dirtyrate calculation */
> long long dirtyRate; /* the dirtyrate in MiB/s */
> + qemuMonitorDirtyRateCalcMode mode; /* calculation mode used in
> + last measurement */
> + size_t nvcpus; /* number of virtual cpu */
> + qemuMonitorDirtyRateVcpu *rates; /* array of dirty page rate */
> };
>
> int
> diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
> index da9a4d9..a07f8c9 100644
> --- a/src/qemu/qemu_monitor_json.c
> +++ b/src/qemu/qemu_monitor_json.c
> @@ -8782,11 +8782,45 @@ VIR_ENUM_IMPL(qemuMonitorDirtyRateStatus,
> "measured");
>
> static int
> +qemuMonitorJSONExtractVcpuDirtyRate(virJSONValue *data,
> + qemuMonitorDirtyRateInfo *info)
> +{
> + size_t nvcpus;
> + int i;
Again, i has to be size_t.
> +
> + nvcpus = virJSONValueArraySize(data);
> + info->nvcpus = nvcpus;
> + info->rates = g_new0(qemuMonitorDirtyRateVcpu, nvcpus);
> +
> + for (i = 0; i < nvcpus; i++) {
> + virJSONValue *entry = virJSONValueArrayGet(data, i);
> + if (virJSONValueObjectGetNumberInt(entry, "id",
> + &info->rates[i].index) < 0) {
> + virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> + _("query-dirty-rate reply was missing 'id' data"));
> + return -1;
> + }
> +
> + if (virJSONValueObjectGetNumberUlong(entry, "dirty-rate",
> + &info->rates[i].value) < 0) {
> + virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> + _("query-dirty-rate reply was missing 'dirty-rate' data"));
> + return -1;
> + }
> + }
> +
> + return 0;
> +}
Michal
© 2016 - 2026 Red Hat, Inc.