Recent changes moved some files to build-aux and created at least
one more.
Signed-off-by: John Ferlan <jferlan@redhat.com>
---
.gitignore | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/.gitignore b/.gitignore
index 85ead5c907..30610a37c9 100644
--- a/.gitignore
+++ b/.gitignore
@@ -43,20 +43,22 @@
/autom4te.cache
/build-aux/.gitignore
/build-aux/compile
+/build-aux/config.guess
+/build-aux/config.sub
/build-aux/depcomp
+/build-aux/install-sh
+/build-aux/ltmain.sh
/build-aux/missing
/build-aux/test-driver
/build/
/ci/scratch/
/confdefs.h
/config.cache
-/config.guess
/config.h
/config.h.in
/config.log
/config.rpath
/config.status
-/config.sub
/configure
/configure.lineno
/conftest.*
@@ -96,7 +98,6 @@
/libvirt*.pc
/libvirt.spec
/ltconfig
-/ltmain.sh
/m4/*
/mingw-libvirt.spec
/mkinstalldirs
--
2.20.1
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
On Wed, Oct 16, 2019 at 08:54:26AM -0400, John Ferlan wrote: > Recent changes moved some files to build-aux and created at least > one more. Really ? I wasn't aware that we'd moved the files listed in this change. > > Signed-off-by: John Ferlan <jferlan@redhat.com> > --- > .gitignore | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/.gitignore b/.gitignore > index 85ead5c907..30610a37c9 100644 > --- a/.gitignore > +++ b/.gitignore > @@ -43,20 +43,22 @@ > /autom4te.cache > /build-aux/.gitignore > /build-aux/compile > +/build-aux/config.guess > +/build-aux/config.sub > /build-aux/depcomp > +/build-aux/install-sh > +/build-aux/ltmain.sh > /build-aux/missing > /build-aux/test-driver > /build/ > /ci/scratch/ > /confdefs.h > /config.cache > -/config.guess > /config.h > /config.h.in > /config.log > /config.rpath > /config.status > -/config.sub > /configure > /configure.lineno > /conftest.* > @@ -96,7 +98,6 @@ > /libvirt*.pc > /libvirt.spec > /ltconfig > -/ltmain.sh > /m4/* > /mingw-libvirt.spec > /mkinstalldirs > -- > 2.20.1 > > -- > libvir-list mailing list > libvir-list@redhat.com > https://www.redhat.com/mailman/listinfo/libvir-list Regards, Daniel -- |: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :| -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
On 10/16/19 10:08 AM, Daniel P. Berrangé wrote: > On Wed, Oct 16, 2019 at 08:54:26AM -0400, John Ferlan wrote: >> Recent changes moved some files to build-aux and created at least >> one more. > > Really ? I wasn't aware that we'd moved the files listed in > this change. > Well that's where they now show up... I dunno. I had to clean my environment more than once due to recent changes and these files now show up in the noted/changed locations. I also use a clean environment for my coverity builds every day and this is where they show up. If that's not right, then maybe someone else can figure out why - I was just going for the "clean" look of/for git status. If I need to change the commit message that works too. I didn't think too long about it. John >> >> Signed-off-by: John Ferlan <jferlan@redhat.com> >> --- >> .gitignore | 7 ++++--- >> 1 file changed, 4 insertions(+), 3 deletions(-) >> >> diff --git a/.gitignore b/.gitignore >> index 85ead5c907..30610a37c9 100644 >> --- a/.gitignore >> +++ b/.gitignore >> @@ -43,20 +43,22 @@ >> /autom4te.cache >> /build-aux/.gitignore >> /build-aux/compile >> +/build-aux/config.guess >> +/build-aux/config.sub >> /build-aux/depcomp >> +/build-aux/install-sh >> +/build-aux/ltmain.sh >> /build-aux/missing >> /build-aux/test-driver >> /build/ >> /ci/scratch/ >> /confdefs.h >> /config.cache >> -/config.guess >> /config.h >> /config.h.in >> /config.log >> /config.rpath >> /config.status >> -/config.sub >> /configure >> /configure.lineno >> /conftest.* >> @@ -96,7 +98,6 @@ >> /libvirt*.pc >> /libvirt.spec >> /ltconfig >> -/ltmain.sh >> /m4/* >> /mingw-libvirt.spec >> /mkinstalldirs >> -- >> 2.20.1 >> >> -- >> libvir-list mailing list >> libvir-list@redhat.com >> https://www.redhat.com/mailman/listinfo/libvir-list > > Regards, > Daniel > -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
On Wed, Oct 16, 2019 at 10:17:16AM -0400, John Ferlan wrote: > > > On 10/16/19 10:08 AM, Daniel P. Berrangé wrote: > > On Wed, Oct 16, 2019 at 08:54:26AM -0400, John Ferlan wrote: > >> Recent changes moved some files to build-aux and created at least > >> one more. > > > > Really ? I wasn't aware that we'd moved the files listed in > > this change. > > > > Well that's where they now show up... I dunno. I had to clean my > environment more than once due to recent changes and these files now > show up in the noted/changed locations. I also use a clean environment > for my coverity builds every day and this is where they show up. Oh in fact I see them in the same place build-aux, but git is not reporting them despite not being listed in gitignore. I wonder if it has some default ignore list its using ? Regards, Daniel -- |: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :| -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
On Wed, Oct 16, 2019 at 03:23:41PM +0100, Daniel P. Berrangé wrote: >On Wed, Oct 16, 2019 at 10:17:16AM -0400, John Ferlan wrote: >> >> >> On 10/16/19 10:08 AM, Daniel P. Berrangé wrote: >> > On Wed, Oct 16, 2019 at 08:54:26AM -0400, John Ferlan wrote: >> >> Recent changes moved some files to build-aux and created at least >> >> one more. >> > >> > Really ? I wasn't aware that we'd moved the files listed in >> > this change. >> > >> >> Well that's where they now show up... I dunno. I had to clean my >> environment more than once due to recent changes and these files now >> show up in the noted/changed locations. I also use a clean environment >> for my coverity builds every day and this is where they show up. > >Oh in fact I see them in the same place build-aux, but git is not >reporting them despite not being listed in gitignore. > Note that there is another .gitignore in build-aux that lists the filenames mentioned in the patch Jano >I wonder if it has some default ignore list its using ? > > >Regards, >Daniel >-- >|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| >|: https://libvirt.org -o- https://fstop138.berrange.com :| >|: https://entangle-photo.org -o- https://www.instagram.com/dberrange :| > >-- >libvir-list mailing list >libvir-list@redhat.com >https://www.redhat.com/mailman/listinfo/libvir-list -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
On 10/16/19 10:52 AM, Ján Tomko wrote: > On Wed, Oct 16, 2019 at 03:23:41PM +0100, Daniel P. Berrangé wrote: >> On Wed, Oct 16, 2019 at 10:17:16AM -0400, John Ferlan wrote: >>> >>> >>> On 10/16/19 10:08 AM, Daniel P. Berrangé wrote: >>> > On Wed, Oct 16, 2019 at 08:54:26AM -0400, John Ferlan wrote: >>> >> Recent changes moved some files to build-aux and created at least >>> >> one more. >>> > >>> > Really ? I wasn't aware that we'd moved the files listed in >>> > this change. >>> > >>> >>> Well that's where they now show up... I dunno. I had to clean my >>> environment more than once due to recent changes and these files now >>> show up in the noted/changed locations. I also use a clean environment >>> for my coverity builds every day and this is where they show up. >> >> Oh in fact I see them in the same place build-aux, but git is not >> reporting them despite not being listed in gitignore. >> > > Note that there is another .gitignore in build-aux that lists the > filenames mentioned in the patch > > Jano > $ cat build-aux/.gitignore /config.rpath /useless-if-before-free /vc-list-files $ hmm... commit 144c06d4ee4cdf9c2035b9912844ab42bcd4dd9a Author: Eric Blake <eblake@redhat.com> Date: Tue Nov 16 12:29:09 2010 -0700 maint: update to latest gnulib ... There's an 'interesting' change to build-aux/.gitignore John >> I wonder if it has some default ignore list its using ? >> >> >> Regards, >> Daniel >> -- >> |: https://berrange.com -o- >> https://www.flickr.com/photos/dberrange :| >> |: https://libvirt.org -o- >> https://fstop138.berrange.com :| >> |: https://entangle-photo.org -o- >> https://www.instagram.com/dberrange :| >> >> -- >> libvir-list mailing list >> libvir-list@redhat.com >> https://www.redhat.com/mailman/listinfo/libvir-list -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
On 10/16/19 9:23 AM, Daniel P. Berrangé wrote: > On Wed, Oct 16, 2019 at 10:17:16AM -0400, John Ferlan wrote: >> >> >> On 10/16/19 10:08 AM, Daniel P. Berrangé wrote: >>> On Wed, Oct 16, 2019 at 08:54:26AM -0400, John Ferlan wrote: >>>> Recent changes moved some files to build-aux and created at least >>>> one more. >>> >>> Really ? I wasn't aware that we'd moved the files listed in >>> this change. >>> >> >> Well that's where they now show up... I dunno. I had to clean my >> environment more than once due to recent changes and these files now >> show up in the noted/changed locations. I also use a clean environment >> for my coverity builds every day and this is where they show up. > > Oh in fact I see them in the same place build-aux, but git is not > reporting them despite not being listed in gitignore. > > I wonder if it has some default ignore list its using ? When using gnulib's bootstrap, gnulib creates or augments .gitignore as needed to cover files that it copies in or which autoconf/automake will install. But as we have been moving away from that, we have to pick up the slack and ignore the files ourselves. -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
On Wed, Oct 16, 2019 at 10:10:48AM -0500, Eric Blake wrote: > On 10/16/19 9:23 AM, Daniel P. Berrangé wrote: > > On Wed, Oct 16, 2019 at 10:17:16AM -0400, John Ferlan wrote: > > > > > > > > > On 10/16/19 10:08 AM, Daniel P. Berrangé wrote: > > > > On Wed, Oct 16, 2019 at 08:54:26AM -0400, John Ferlan wrote: > > > > > Recent changes moved some files to build-aux and created at least > > > > > one more. > > > > > > > > Really ? I wasn't aware that we'd moved the files listed in > > > > this change. > > > > > > > > > > Well that's where they now show up... I dunno. I had to clean my > > > environment more than once due to recent changes and these files now > > > show up in the noted/changed locations. I also use a clean environment > > > for my coverity builds every day and this is where they show up. > > > > Oh in fact I see them in the same place build-aux, but git is not > > reporting them despite not being listed in gitignore. > > > > I wonder if it has some default ignore list its using ? > > When using gnulib's bootstrap, gnulib creates or augments .gitignore as > needed to cover files that it copies in or which autoconf/automake will > install. But as we have been moving away from that, we have to pick up the > slack and ignore the files ourselves. I think we're fine to continue relyuing on bootstrap to create this .gitignore file until we switch to meson, at which point it won't matter anyway, as we'll isolate everything gnulib does in its own subdirectory away from the root. Regards, Daniel -- |: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :| -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
© 2016 - 2024 Red Hat, Inc.