Add support for converting openvswitch interface configuration
to/from libvirt domXML and xl.cfg(5). The xl config syntax for
virtual interfaces is described in detail in the
xl-network-configuration(5) man page. The Xen Networking wiki
also contains information and examples for using openvswitch
in xl.cfg config format
https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitch
Tests are added to check conversions of openvswitch tagged and
trunked VLAN configuration.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
---
src/xenconfig/xen_common.c | 113 +++++++++++++++++-
.../test-fullvirt-ovswitch-tagged.cfg | 25 ++++
.../test-fullvirt-ovswitch-tagged.xml | 50 ++++++++
.../test-fullvirt-ovswitch-trunked.cfg | 25 ++++
.../test-fullvirt-ovswitch-trunked.xml | 51 ++++++++
tests/xlconfigtest.c | 2 +
6 files changed, 262 insertions(+), 4 deletions(-)
diff --git a/src/xenconfig/xen_common.c b/src/xenconfig/xen_common.c
index 0a9958711f..5390b933e0 100644
--- a/src/xenconfig/xen_common.c
+++ b/src/xenconfig/xen_common.c
@@ -856,6 +856,84 @@ xenParseCharDev(virConfPtr conf, virDomainDefPtr def, const char *nativeFormat)
}
+static int
+xenParseVifBridge(virDomainNetDefPtr net, char *bridge)
+{
+ char *vlanstr;
+ unsigned int tag;
+
+ /* 'bridge' string contains a bridge name and single vlan tag */
+ vlanstr = strchr(bridge, '.');
+ if (vlanstr) {
+ if (VIR_STRNDUP(net->data.bridge.brname, bridge, vlanstr - bridge) < 0)
+ return -1;
+
+ vlanstr++;
+ if (virStrToLong_ui(vlanstr, NULL, 10, &tag) < 0)
+ return -1;
+
+ if (VIR_ALLOC_N(net->vlan.tag, 1) < 0)
+ return -1;
+
+ net->vlan.tag[0] = tag;
+ net->vlan.nTags = 1;
+
+ if (VIR_ALLOC(net->virtPortProfile) < 0)
+ return -1;
+
+ net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
+ return 0;
+ }
+
+ /* 'bridge' string contains a bridge name and one or more vlan trunks */
+ vlanstr = strchr(bridge, ':');
+ if (vlanstr) {
+ size_t i;
+ size_t nvlans = 0;
+ char **vlanstr_list = virStringSplit(bridge, ":", 0);
+
+ if (!vlanstr_list)
+ return -1;
+
+ if (VIR_STRDUP(net->data.bridge.brname, vlanstr_list[0]) < 0) {
+ virStringListFree(vlanstr_list);
+ return -1;
+ }
+
+ for (i = 1; vlanstr_list[i]; i++)
+ nvlans++;
+
+ if (VIR_ALLOC_N(net->vlan.tag, nvlans) < 0) {
+ virStringListFree(vlanstr_list);
+ return -1;
+ }
+
+ for (i = 1; i <= nvlans; i++) {
+ if (virStrToLong_ui(vlanstr_list[i], NULL, 10, &tag) < 0) {
+ virStringListFree(vlanstr_list);
+ return -1;
+ }
+ net->vlan.tag[i - 1] = tag;
+ }
+ net->vlan.nTags = nvlans;
+ net->vlan.trunk = true;
+ virStringListFree(vlanstr_list);
+
+ if (VIR_ALLOC(net->virtPortProfile) < 0)
+ return -1;
+
+ net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
+ return 0;
+ }
+
+ /* 'bridge' string only contains the bridge name */
+ if (VIR_STRDUP(net->data.bridge.brname, bridge) < 0)
+ return -1;
+
+ return 0;
+}
+
+
static virDomainNetDefPtr
xenParseVif(char *entry, const char *vif_typename)
{
@@ -974,8 +1052,8 @@ xenParseVif(char *entry, const char *vif_typename)
net->type = VIR_DOMAIN_NET_TYPE_ETHERNET;
}
- if (net->type == VIR_DOMAIN_NET_TYPE_BRIDGE) {
- if (bridge[0] && VIR_STRDUP(net->data.bridge.brname, bridge) < 0)
+ if (net->type == VIR_DOMAIN_NET_TYPE_BRIDGE && bridge[0]) {
+ if (xenParseVifBridge(net, bridge) < 0)
goto cleanup;
}
if (ip[0]) {
@@ -1249,14 +1327,41 @@ xenFormatNet(virConnectPtr conn,
switch (net->type) {
case VIR_DOMAIN_NET_TYPE_BRIDGE:
+ {
+ virNetDevVPortProfilePtr port_profile = virDomainNetGetActualVirtPortProfile(net);
+ virNetDevVlanPtr virt_vlan = virDomainNetGetActualVlan(net);
+ const char *script = net->script;
+ size_t i;
+
virBufferAsprintf(&buf, ",bridge=%s", net->data.bridge.brname);
+ if (port_profile &&
+ port_profile->virtPortType == VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH) {
+ if (!script)
+ script = "vif-openvswitch";
+ /*
+ * libxl_device_nic->bridge supports an extended format for
+ * specifying VLAN tags and trunks
+ *
+ * BRIDGE_NAME[.VLAN][:TRUNK:TRUNK]
+ */
+ if (virt_vlan && virt_vlan->nTags > 0) {
+ if (virt_vlan->trunk) {
+ for (i = 0; i < virt_vlan->nTags; i++)
+ virBufferAsprintf(&buf, ":%d", virt_vlan->tag[i]);
+ } else {
+ virBufferAsprintf(&buf, ".%d", virt_vlan->tag[0]);
+ }
+ }
+ }
+
if (net->guestIP.nips > 0) {
char *ipStr = xenMakeIPList(&net->guestIP);
virBufferAsprintf(&buf, ",ip=%s", ipStr);
VIR_FREE(ipStr);
}
- virBufferAsprintf(&buf, ",script=%s", DEFAULT_VIF_SCRIPT);
- break;
+ virBufferAsprintf(&buf, ",script=%s", script ? script : DEFAULT_VIF_SCRIPT);
+ }
+ break;
case VIR_DOMAIN_NET_TYPE_ETHERNET:
if (net->script)
diff --git a/tests/xlconfigdata/test-fullvirt-ovswitch-tagged.cfg b/tests/xlconfigdata/test-fullvirt-ovswitch-tagged.cfg
new file mode 100644
index 0000000000..6a3dc3cfeb
--- /dev/null
+++ b/tests/xlconfigdata/test-fullvirt-ovswitch-tagged.cfg
@@ -0,0 +1,25 @@
+name = "XenGuest2"
+uuid = "c7a5fdb2-cdaf-9455-926a-d65c16db1809"
+maxmem = 8192
+memory = 8192
+vcpus = 8
+pae = 1
+acpi = 1
+apic = 1
+viridian = 0
+rtc_timeoffset = 0
+localtime = 0
+on_poweroff = "destroy"
+on_reboot = "restart"
+on_crash = "restart"
+device_model = "/usr/lib/xen/bin/qemu-system-i386"
+sdl = 0
+vnc = 1
+vncunused = 1
+vnclisten = "127.0.0.1"
+vif = [ "mac=00:16:3e:66:92:9c,bridge=ovsbr0.42,script=vif-openvswitch,model=e1000" ]
+parallel = "none"
+serial = "none"
+builder = "hvm"
+boot = "c"
+disk = [ "format=raw,vdev=hda,access=rw,backendtype=phy,target=/dev/HostVG/XenGuest2" ]
diff --git a/tests/xlconfigdata/test-fullvirt-ovswitch-tagged.xml b/tests/xlconfigdata/test-fullvirt-ovswitch-tagged.xml
new file mode 100644
index 0000000000..63f3258b84
--- /dev/null
+++ b/tests/xlconfigdata/test-fullvirt-ovswitch-tagged.xml
@@ -0,0 +1,50 @@
+<domain type='xen'>
+ <name>XenGuest2</name>
+ <uuid>c7a5fdb2-cdaf-9455-926a-d65c16db1809</uuid>
+ <memory unit='KiB'>8388608</memory>
+ <currentMemory unit='KiB'>8388608</currentMemory>
+ <vcpu placement='static'>8</vcpu>
+ <os>
+ <type arch='x86_64' machine='xenfv'>hvm</type>
+ <loader type='rom'>/usr/lib/xen/boot/hvmloader</loader>
+ <boot dev='hd'/>
+ </os>
+ <features>
+ <acpi/>
+ <apic/>
+ <pae/>
+ </features>
+ <clock offset='variable' adjustment='0' basis='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>restart</on_crash>
+ <devices>
+ <emulator>/usr/lib/xen/bin/qemu-system-i386</emulator>
+ <disk type='block' device='disk'>
+ <driver name='phy' type='raw'/>
+ <source dev='/dev/HostVG/XenGuest2'/>
+ <target dev='hda' bus='ide'/>
+ <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+ </disk>
+ <controller type='ide' index='0'/>
+ <interface type='bridge'>
+ <mac address='00:16:3e:66:92:9c'/>
+ <source bridge='ovsbr0'/>
+ <vlan>
+ <tag id='42'/>
+ </vlan>
+ <virtualport type='openvswitch'/>
+ <script path='vif-openvswitch'/>
+ <model type='e1000'/>
+ </interface>
+ <input type='mouse' bus='ps2'/>
+ <input type='keyboard' bus='ps2'/>
+ <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
+ <listen type='address' address='127.0.0.1'/>
+ </graphics>
+ <video>
+ <model type='cirrus' vram='8192' heads='1' primary='yes'/>
+ </video>
+ <memballoon model='xen'/>
+ </devices>
+</domain>
diff --git a/tests/xlconfigdata/test-fullvirt-ovswitch-trunked.cfg b/tests/xlconfigdata/test-fullvirt-ovswitch-trunked.cfg
new file mode 100644
index 0000000000..29e9d38ae8
--- /dev/null
+++ b/tests/xlconfigdata/test-fullvirt-ovswitch-trunked.cfg
@@ -0,0 +1,25 @@
+name = "XenGuest2"
+uuid = "c7a5fdb2-cdaf-9455-926a-d65c16db1809"
+maxmem = 8192
+memory = 8192
+vcpus = 8
+pae = 1
+acpi = 1
+apic = 1
+viridian = 0
+rtc_timeoffset = 0
+localtime = 0
+on_poweroff = "destroy"
+on_reboot = "restart"
+on_crash = "restart"
+device_model = "/usr/lib/xen/bin/qemu-system-i386"
+sdl = 0
+vnc = 1
+vncunused = 1
+vnclisten = "127.0.0.1"
+vif = [ "mac=00:16:3e:66:92:9c,bridge=ovsbr0:42:43,script=vif-openvswitch,model=e1000" ]
+parallel = "none"
+serial = "none"
+builder = "hvm"
+boot = "c"
+disk = [ "format=raw,vdev=hda,access=rw,backendtype=phy,target=/dev/HostVG/XenGuest2" ]
diff --git a/tests/xlconfigdata/test-fullvirt-ovswitch-trunked.xml b/tests/xlconfigdata/test-fullvirt-ovswitch-trunked.xml
new file mode 100644
index 0000000000..72d547b2c1
--- /dev/null
+++ b/tests/xlconfigdata/test-fullvirt-ovswitch-trunked.xml
@@ -0,0 +1,51 @@
+<domain type='xen'>
+ <name>XenGuest2</name>
+ <uuid>c7a5fdb2-cdaf-9455-926a-d65c16db1809</uuid>
+ <memory unit='KiB'>8388608</memory>
+ <currentMemory unit='KiB'>8388608</currentMemory>
+ <vcpu placement='static'>8</vcpu>
+ <os>
+ <type arch='x86_64' machine='xenfv'>hvm</type>
+ <loader type='rom'>/usr/lib/xen/boot/hvmloader</loader>
+ <boot dev='hd'/>
+ </os>
+ <features>
+ <acpi/>
+ <apic/>
+ <pae/>
+ </features>
+ <clock offset='variable' adjustment='0' basis='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>restart</on_crash>
+ <devices>
+ <emulator>/usr/lib/xen/bin/qemu-system-i386</emulator>
+ <disk type='block' device='disk'>
+ <driver name='phy' type='raw'/>
+ <source dev='/dev/HostVG/XenGuest2'/>
+ <target dev='hda' bus='ide'/>
+ <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+ </disk>
+ <controller type='ide' index='0'/>
+ <interface type='bridge'>
+ <mac address='00:16:3e:66:92:9c'/>
+ <source bridge='ovsbr0'/>
+ <vlan trunk='yes'>
+ <tag id='42'/>
+ <tag id='43'/>
+ </vlan>
+ <virtualport type='openvswitch'/>
+ <script path='vif-openvswitch'/>
+ <model type='e1000'/>
+ </interface>
+ <input type='mouse' bus='ps2'/>
+ <input type='keyboard' bus='ps2'/>
+ <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
+ <listen type='address' address='127.0.0.1'/>
+ </graphics>
+ <video>
+ <model type='cirrus' vram='8192' heads='1' primary='yes'/>
+ </video>
+ <memballoon model='xen'/>
+ </devices>
+</domain>
diff --git a/tests/xlconfigtest.c b/tests/xlconfigtest.c
index b2e4591c3b..a696ce28b3 100644
--- a/tests/xlconfigtest.c
+++ b/tests/xlconfigtest.c
@@ -250,6 +250,8 @@ mymain(void)
DO_TEST_FORMAT(name, true); \
} while (0)
+ DO_TEST("fullvirt-ovswitch-tagged");
+ DO_TEST("fullvirt-ovswitch-trunked");
DO_TEST_REPLACE_VARS("fullvirt-ovmf");
DO_TEST("paravirt-maxvcpus");
DO_TEST("new-disk");
--
2.18.0
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
On 11/16/18 11:26 PM, Jim Fehlig wrote:
> Add support for converting openvswitch interface configuration
> to/from libvirt domXML and xl.cfg(5). The xl config syntax for
> virtual interfaces is described in detail in the
> xl-network-configuration(5) man page. The Xen Networking wiki
> also contains information and examples for using openvswitch
> in xl.cfg config format
>
> https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitch
>
> Tests are added to check conversions of openvswitch tagged and
> trunked VLAN configuration.
>
> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
> ---
> src/xenconfig/xen_common.c | 113 +++++++++++++++++-
> .../test-fullvirt-ovswitch-tagged.cfg | 25 ++++
> .../test-fullvirt-ovswitch-tagged.xml | 50 ++++++++
> .../test-fullvirt-ovswitch-trunked.cfg | 25 ++++
> .../test-fullvirt-ovswitch-trunked.xml | 51 ++++++++
> tests/xlconfigtest.c | 2 +
> 6 files changed, 262 insertions(+), 4 deletions(-)
>
> diff --git a/src/xenconfig/xen_common.c b/src/xenconfig/xen_common.c
> index 0a9958711f..5390b933e0 100644
> --- a/src/xenconfig/xen_common.c
> +++ b/src/xenconfig/xen_common.c
> @@ -856,6 +856,84 @@ xenParseCharDev(virConfPtr conf, virDomainDefPtr def, const char *nativeFormat)
> }
>
>
> +static int
> +xenParseVifBridge(virDomainNetDefPtr net, char *bridge)
> +{
> + char *vlanstr;
> + unsigned int tag;
> +
> + /* 'bridge' string contains a bridge name and single vlan tag */
> + vlanstr = strchr(bridge, '.');
> + if (vlanstr) {
> + if (VIR_STRNDUP(net->data.bridge.brname, bridge, vlanstr - bridge) < 0)
> + return -1;
> +
> + vlanstr++;
> + if (virStrToLong_ui(vlanstr, NULL, 10, &tag) < 0)
> + return -1;
> +
> + if (VIR_ALLOC_N(net->vlan.tag, 1) < 0)
> + return -1;
> +
> + net->vlan.tag[0] = tag;
> + net->vlan.nTags = 1;
> +
> + if (VIR_ALLOC(net->virtPortProfile) < 0)
> + return -1;
> +
> + net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
> + return 0;
> + }
> +
> + /* 'bridge' string contains a bridge name and one or more vlan trunks */
> + vlanstr = strchr(bridge, ':');
> + if (vlanstr) {
> + size_t i;
> + size_t nvlans = 0;
> + char **vlanstr_list = virStringSplit(bridge, ":", 0);
> +
> + if (!vlanstr_list)
> + return -1;
> +
> + if (VIR_STRDUP(net->data.bridge.brname, vlanstr_list[0]) < 0) {
> + virStringListFree(vlanstr_list);
> + return -1;
> + }
> +
> + for (i = 1; vlanstr_list[i]; i++)
> + nvlans++;
> +
> + if (VIR_ALLOC_N(net->vlan.tag, nvlans) < 0) {
> + virStringListFree(vlanstr_list);
> + return -1;
> + }
> +
> + for (i = 1; i <= nvlans; i++) {
> + if (virStrToLong_ui(vlanstr_list[i], NULL, 10, &tag) < 0) {
> + virStringListFree(vlanstr_list);
> + return -1;
> + }
> + net->vlan.tag[i - 1] = tag;
> + }
> + net->vlan.nTags = nvlans;
> + net->vlan.trunk = true;
> + virStringListFree(vlanstr_list);
> +
> + if (VIR_ALLOC(net->virtPortProfile) < 0)
> + return -1;
> +
> + net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
> + return 0;
> + }
> +
> + /* 'bridge' string only contains the bridge name */
> + if (VIR_STRDUP(net->data.bridge.brname, bridge) < 0)
> + return -1;
> +
> + return 0;
Not a show stopper, I just wonder if we should perhaps use:
if ((vlanstr = strchr(bridge, '.'))) {
...
} else if ((vlanstr = strchr(bridge, ':'))) {
...
} else {
...
}
return 0;
To me that looks a bit cleaner, but I'll leave it up to you. Don't want
to be picky.
> +}
> +
> +
> static virDomainNetDefPtr
> xenParseVif(char *entry, const char *vif_typename)
> {
> @@ -974,8 +1052,8 @@ xenParseVif(char *entry, const char *vif_typename)
> net->type = VIR_DOMAIN_NET_TYPE_ETHERNET;
> }
>
> - if (net->type == VIR_DOMAIN_NET_TYPE_BRIDGE) {
> - if (bridge[0] && VIR_STRDUP(net->data.bridge.brname, bridge) < 0)
> + if (net->type == VIR_DOMAIN_NET_TYPE_BRIDGE && bridge[0]) {
> + if (xenParseVifBridge(net, bridge) < 0)
> goto cleanup;
> }
> if (ip[0]) {
Michal
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
On 12/6/18 12:44 AM, Michal Privoznik wrote:
> On 11/16/18 11:26 PM, Jim Fehlig wrote:
>> Add support for converting openvswitch interface configuration
>> to/from libvirt domXML and xl.cfg(5). The xl config syntax for
>> virtual interfaces is described in detail in the
>> xl-network-configuration(5) man page. The Xen Networking wiki
>> also contains information and examples for using openvswitch
>> in xl.cfg config format
>>
>> https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitch
>>
>> Tests are added to check conversions of openvswitch tagged and
>> trunked VLAN configuration.
>>
>> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
>> ---
>> src/xenconfig/xen_common.c | 113 +++++++++++++++++-
>> .../test-fullvirt-ovswitch-tagged.cfg | 25 ++++
>> .../test-fullvirt-ovswitch-tagged.xml | 50 ++++++++
>> .../test-fullvirt-ovswitch-trunked.cfg | 25 ++++
>> .../test-fullvirt-ovswitch-trunked.xml | 51 ++++++++
>> tests/xlconfigtest.c | 2 +
>> 6 files changed, 262 insertions(+), 4 deletions(-)
>>
>> diff --git a/src/xenconfig/xen_common.c b/src/xenconfig/xen_common.c
>> index 0a9958711f..5390b933e0 100644
>> --- a/src/xenconfig/xen_common.c
>> +++ b/src/xenconfig/xen_common.c
>> @@ -856,6 +856,84 @@ xenParseCharDev(virConfPtr conf, virDomainDefPtr def, const char *nativeFormat)
>> }
>>
>>
>> +static int
>> +xenParseVifBridge(virDomainNetDefPtr net, char *bridge)
>> +{
>> + char *vlanstr;
>> + unsigned int tag;
>> +
>> + /* 'bridge' string contains a bridge name and single vlan tag */
>> + vlanstr = strchr(bridge, '.');
>> + if (vlanstr) {
>> + if (VIR_STRNDUP(net->data.bridge.brname, bridge, vlanstr - bridge) < 0)
>> + return -1;
>> +
>> + vlanstr++;
>> + if (virStrToLong_ui(vlanstr, NULL, 10, &tag) < 0)
>> + return -1;
>> +
>> + if (VIR_ALLOC_N(net->vlan.tag, 1) < 0)
>> + return -1;
>> +
>> + net->vlan.tag[0] = tag;
>> + net->vlan.nTags = 1;
>> +
>> + if (VIR_ALLOC(net->virtPortProfile) < 0)
>> + return -1;
>> +
>> + net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
>> + return 0;
>> + }
>> +
>> + /* 'bridge' string contains a bridge name and one or more vlan trunks */
>> + vlanstr = strchr(bridge, ':');
>> + if (vlanstr) {
>> + size_t i;
>> + size_t nvlans = 0;
>> + char **vlanstr_list = virStringSplit(bridge, ":", 0);
>> +
>> + if (!vlanstr_list)
>> + return -1;
>> +
>> + if (VIR_STRDUP(net->data.bridge.brname, vlanstr_list[0]) < 0) {
>> + virStringListFree(vlanstr_list);
>> + return -1;
>> + }
>> +
>> + for (i = 1; vlanstr_list[i]; i++)
>> + nvlans++;
>> +
>> + if (VIR_ALLOC_N(net->vlan.tag, nvlans) < 0) {
>> + virStringListFree(vlanstr_list);
>> + return -1;
>> + }
>> +
>> + for (i = 1; i <= nvlans; i++) {
>> + if (virStrToLong_ui(vlanstr_list[i], NULL, 10, &tag) < 0) {
>> + virStringListFree(vlanstr_list);
>> + return -1;
>> + }
>> + net->vlan.tag[i - 1] = tag;
>> + }
>> + net->vlan.nTags = nvlans;
>> + net->vlan.trunk = true;
>> + virStringListFree(vlanstr_list);
>> +
>> + if (VIR_ALLOC(net->virtPortProfile) < 0)
>> + return -1;
>> +
>> + net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
>> + return 0;
>> + }
>> +
>> + /* 'bridge' string only contains the bridge name */
>> + if (VIR_STRDUP(net->data.bridge.brname, bridge) < 0)
>> + return -1;
>> +
>> + return 0;
>
> Not a show stopper, I just wonder if we should perhaps use:
>
> if ((vlanstr = strchr(bridge, '.'))) {
> ...
> } else if ((vlanstr = strchr(bridge, ':'))) {
> ...
> } else {
> ...
> }
>
> return 0;
>
> To me that looks a bit cleaner, but I'll leave it up to you. Don't want
> to be picky.
It definitely looks cleaner. I'll squash in the below diff before pushing.
Thanks a lot for reviewing the patches!
Regards,
Jim
diff --git a/src/xenconfig/xen_common.c b/src/xenconfig/xen_common.c
index 83eb28cdc9..60c8d7edc8 100644
--- a/src/xenconfig/xen_common.c
+++ b/src/xenconfig/xen_common.c
@@ -862,9 +862,8 @@ xenParseVifBridge(virDomainNetDefPtr net, char *bridge)
char *vlanstr;
unsigned int tag;
- /* 'bridge' string contains a bridge name and single vlan tag */
- vlanstr = strchr(bridge, '.');
- if (vlanstr) {
+ if ((vlanstr = strchr(bridge, '.'))) {
+ /* 'bridge' string contains a bridge name and single vlan tag */
if (VIR_STRNDUP(net->data.bridge.brname, bridge, vlanstr - bridge) < 0)
return -1;
@@ -883,11 +882,8 @@ xenParseVifBridge(virDomainNetDefPtr net, char *bridge)
net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
return 0;
- }
-
- /* 'bridge' string contains a bridge name and one or more vlan trunks */
- vlanstr = strchr(bridge, ':');
- if (vlanstr) {
+ } else if ((vlanstr = strchr(bridge, ':'))) {
+ /* 'bridge' string contains a bridge name and one or more vlan trunks */
size_t i;
size_t nvlans = 0;
char **vlanstr_list = virStringSplit(bridge, ":", 0);
@@ -924,12 +920,12 @@ xenParseVifBridge(virDomainNetDefPtr net, char *bridge)
net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
return 0;
+ } else {
+ /* 'bridge' string only contains the bridge name */
+ if (VIR_STRDUP(net->data.bridge.brname, bridge) < 0)
+ return -1;
}
- /* 'bridge' string only contains the bridge name */
- if (VIR_STRDUP(net->data.bridge.brname, bridge) < 0)
- return -1;
-
return 0;
}
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
© 2016 - 2026 Red Hat, Inc.