CpuIo2Dxe only supports IO to access to CPU IO. Some ARCHs that do not
implement ports for CPU IO require MMIO to access PCI IO, and they
pretty much put the IO devices under the LPC bus, which is usually under
the PCIe/PCI bus. CpuMmio2Dxe was added to meet these needs.
CpuMmio2Dxe depends on PcdPciIoTranslation. The code is copied from
ArmPkg.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
---
UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.c | 557 +++++++++++++++++++++++++
UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.inf | 48 +++
UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.uni | 18 +
UefiCpuPkg/UefiCpuPkg.dsc | 2 +
4 files changed, 625 insertions(+)
create mode 100644 UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.c
create mode 100644 UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.inf
create mode 100644 UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.uni
diff --git a/UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.c b/UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.c
new file mode 100644
index 0000000000..32ccac1cc6
--- /dev/null
+++ b/UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.c
@@ -0,0 +1,557 @@
+/** @file
+ Produces the CPU I/O 2 Protocol.
+
+Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+Copyright (c) 2024 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiDxe.h>
+
+#include <Protocol/CpuIo2.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#define MAX_IO_PORT_ADDRESS 0xFFFF
+
+//
+// Handle for the CPU I/O 2 Protocol
+//
+STATIC EFI_HANDLE mHandle = NULL;
+
+//
+// Lookup table for increment values based on transfer widths
+//
+STATIC CONST UINT8 mInStride[] = {
+ 1, // EfiCpuIoWidthUint8
+ 2, // EfiCpuIoWidthUint16
+ 4, // EfiCpuIoWidthUint32
+ 8, // EfiCpuIoWidthUint64
+ 0, // EfiCpuIoWidthFifoUint8
+ 0, // EfiCpuIoWidthFifoUint16
+ 0, // EfiCpuIoWidthFifoUint32
+ 0, // EfiCpuIoWidthFifoUint64
+ 1, // EfiCpuIoWidthFillUint8
+ 2, // EfiCpuIoWidthFillUint16
+ 4, // EfiCpuIoWidthFillUint32
+ 8 // EfiCpuIoWidthFillUint64
+};
+
+//
+// Lookup table for increment values based on transfer widths
+//
+STATIC CONST UINT8 mOutStride[] = {
+ 1, // EfiCpuIoWidthUint8
+ 2, // EfiCpuIoWidthUint16
+ 4, // EfiCpuIoWidthUint32
+ 8, // EfiCpuIoWidthUint64
+ 1, // EfiCpuIoWidthFifoUint8
+ 2, // EfiCpuIoWidthFifoUint16
+ 4, // EfiCpuIoWidthFifoUint32
+ 8, // EfiCpuIoWidthFifoUint64
+ 0, // EfiCpuIoWidthFillUint8
+ 0, // EfiCpuIoWidthFillUint16
+ 0, // EfiCpuIoWidthFillUint32
+ 0 // EfiCpuIoWidthFillUint64
+};
+
+/**
+ Check parameters to a CPU I/O 2 Protocol service request.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ @param[in] MmioOperation TRUE for an MMIO operation, FALSE for I/O Port operation.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The parameters for this request pass the checks.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+STATIC
+EFI_STATUS
+CpuIoCheckParameter (
+ IN BOOLEAN MmioOperation,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ UINT64 MaxCount;
+ UINT64 Limit;
+
+ //
+ // Check to see if Buffer is NULL
+ //
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check to see if Width is in the valid range
+ //
+ if ((UINT32)Width >= EfiCpuIoWidthMaximum) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // For FIFO type, the target address won't increase during the access,
+ // so treat Count as 1
+ //
+ if ((Width >= EfiCpuIoWidthFifoUint8) && (Width <= EfiCpuIoWidthFifoUint64)) {
+ Count = 1;
+ }
+
+ //
+ // Check to see if Width is in the valid range for I/O Port operations
+ //
+ Width = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
+ if (!MmioOperation && (Width == EfiCpuIoWidthUint64)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check to see if Address is aligned
+ //
+ if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Check to see if any address associated with this transfer exceeds the maximum
+ // allowed address. The maximum address implied by the parameters passed in is
+ // Address + Size * Count. If the following condition is met, then the transfer
+ // is not supported.
+ //
+ // Address + Size * Count > (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS) + 1
+ //
+ // Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count
+ // can also be the maximum integer value supported by the CPU, this range
+ // check must be adjusted to avoid all overflow conditions.
+ //
+ // The following form of the range check is equivalent but assumes that
+ // MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1).
+ //
+ Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS);
+ if (Count == 0) {
+ if (Address > Limit) {
+ return EFI_UNSUPPORTED;
+ }
+ } else {
+ MaxCount = RShiftU64 (Limit, Width);
+ if (MaxCount < (Count - 1)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
+ return EFI_UNSUPPORTED;
+ }
+ }
+
+ //
+ // Check to see if Buffer is aligned
+ //
+ if (((UINTN)Buffer & ((MIN (sizeof (UINTN), mInStride[Width]) - 1))) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Reads memory-mapped registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceRead (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ *Uint8Buffer = MmioRead8 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint64) {
+ *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Writes memory-mapped registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceWrite (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ MmioWrite8 ((UINTN)Address, *Uint8Buffer);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint64) {
+ MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Reads I/O registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuIoServiceRead (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Address += PcdGet64 (PcdPciIoTranslation);
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
+
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ *Uint8Buffer = MmioRead8 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Write I/O registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuIoServiceWrite (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ //
+ // Make sure the parameters are valid
+ //
+ Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Address += PcdGet64 (PcdPciIoTranslation);
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03);
+
+ for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ MmioWrite8 ((UINTN)Address, *Uint8Buffer);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+//
+// CPU I/O 2 Protocol instance
+//
+STATIC EFI_CPU_IO2_PROTOCOL mCpuMmio2 = {
+ {
+ CpuMemoryServiceRead,
+ CpuMemoryServiceWrite
+ },
+ {
+ CpuIoServiceRead,
+ CpuIoServiceWrite
+ }
+};
+
+/**
+ The user Entry Point for module CpuIo2Dxe. The user code starts with this function.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval other Some error occurs when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuMmio2Initialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiCpuIo2ProtocolGuid);
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mHandle,
+ &gEfiCpuIo2ProtocolGuid,
+ &mCpuMmio2,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.inf b/UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.inf
new file mode 100644
index 0000000000..32577be7ea
--- /dev/null
+++ b/UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.inf
@@ -0,0 +1,48 @@
+## @file
+# Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
+#
+# Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+# Copyright (c) 2024 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 1.29
+ BASE_NAME = CpuMmio2Dxe
+ MODULE_UNI_FILE = CpuMmio2Dxe.uni
+ FILE_GUID = FBC36D76-CF22-2584-DBD8-85FF765BAEF1
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = CpuMmio2Initialize
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = ARM AARCH64 LOONGARCH64 RISCV64
+#
+
+[Sources]
+ CpuMmio2Dxe.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+ BaseLib
+ DebugLib
+ IoLib
+ PcdLib
+ UefiBootServicesTableLib
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslation
+
+[Protocols]
+ gEfiCpuIo2ProtocolGuid ## PRODUCES
+
+[Depex]
+ TRUE
diff --git a/UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.uni b/UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.uni
new file mode 100644
index 0000000000..af3b1a656f
--- /dev/null
+++ b/UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.uni
@@ -0,0 +1,18 @@
+// /** @file
+// Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
+//
+// Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
+//
+// Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+// Copyright (c) 2024 Loongson Technology Corporation Limited. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "Produces the CPU I/O 2 Protocol by using the services of the I/O Library"
+
+#string STR_MODULE_DESCRIPTION #language en-US "Produces the CPU I/O 2 Protocol by using the services of the I/O Library."
+
diff --git a/UefiCpuPkg/UefiCpuPkg.dsc b/UefiCpuPkg/UefiCpuPkg.dsc
index 178dc3c0f9..4aa1fd218b 100644
--- a/UefiCpuPkg/UefiCpuPkg.dsc
+++ b/UefiCpuPkg/UefiCpuPkg.dsc
@@ -206,8 +206,10 @@
UefiCpuPkg/Library/BaseRiscVMmuLib/BaseRiscVMmuLib.inf
UefiCpuPkg/CpuTimerDxeRiscV64/CpuTimerDxeRiscV64.inf
UefiCpuPkg/CpuDxeRiscV64/CpuDxeRiscV64.inf
+ UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.inf
[Components.LOONGARCH64]
+ UefiCpuPkg/CpuMmio2Dxe/CpuMmio2Dxe.inf
UefiCpuPkg/Library/CpuMmuLib/DxeCpuMmuLib.inf
UefiCpuPkg/Library/CpuMmuLib/PeiCpuMmuLib.inf
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#114545): https://edk2.groups.io/g/devel/message/114545
Mute This Topic: https://groups.io/mt/103971663/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-