Add the complete build instruction for CN913x Development Board.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Platform/Marvell/Cn913xDb/Readme.md | 98 ++++++++++++++++++++
1 file changed, 98 insertions(+)
create mode 100644 Platform/Marvell/Cn913xDb/Readme.md
diff --git a/Platform/Marvell/Cn913xDb/Readme.md b/Platform/Marvell/Cn913xDb/Readme.md
new file mode 100644
index 0000000000..ecdb78302b
--- /dev/null
+++ b/Platform/Marvell/Cn913xDb/Readme.md
@@ -0,0 +1,98 @@
+Marvell CN913x Development Board
+================================
+
+# Summary
+
+This is a port of 64-bit TianoCore EDK II firmware for the Marvell CN913x Development Board.
+
+# Building the firmware
+
+## Prepare toolchain (for cross-compilation only):
+
+1. Download the toolchain:
+
+ ```
+ wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz
+ ```
+
+1. After extracting, setup the path and compiler prefix to GCC5\_AARCH64\_PREFIX variable:
+
+ ```
+ export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
+ ```
+
+## Prepare prerequisites
+
+1. Create a new folder (directory) on your local development machine
+ for use as your workspace. This example uses `/work/git/tianocore`, modify as
+ appropriate for your needs.
+
+ ```
+ $ export WORKSPACE=/work/git/tianocore
+ $ mkdir -p $WORKSPACE
+ $ cd $WORKSPACE
+ ```
+
+1. Clone the Trusted Firmware repository:
+
+ ```
+ $ cd ${WORKSPACE}
+ $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
+ ```
+1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:
+
+ ```
+ $ cd ${WORKSPACE}
+ $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
+ $ cd binaries-marvell/
+ $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
+ ```
+1. Clone the DDR training code from:
+
+ ```
+ $ cd ${WORKSPACE}
+ $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
+ ```
+## Prepare EDKII environment:
+
+Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms [Readme.md](https://github.com/tianocore/edk2-platforms#readme).
+
+## Build EDKII:
+
+1. Use below build command:
+
+ ```
+ $ cd ${WORKSPACE}
+ $ build -a AARCH64 -t GCC5 -b RELEASE -D CN9132 -D INCLUDE_TFTP_COMMAND -D CAPSULE_ENABLE -p Platform/Marvell/Cn913xDb/Cn913xDbA.dsc
+ ```
+
+## Build the final firmware image:
+
+1. Set BL33 variable to path to EDK II output binary:
+
+ ```
+ $ export BL33=${WORKSPACE}/Build/Cn9132DbA-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
+ ```
+1. Export SCP_BL2 variable:
+
+ ```
+ $ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
+ ```
+1. Export compiler variables (for cross-compilation only):
+
+ ```
+ $ export ARCH=arm64
+ $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
+ ```
+1. Build the image:
+
+ ```
+ $ cd ${WORKSPACE}/trusted-firmware-a/
+ $ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell CP_NUM=3 PLAT=t9130 all fip mrvl_flash
+
+ ```
+The firmware image `flash-image.bin` can be found in `build/t9130/release/` directory.
+
+# ARM System Ready certification.
+
+CN913x Development Board is [System Ready ES](https://developer.arm.com/architectures/system-architectures/arm-systemready/es) certified. Release binary and the firmware components' baselines list are available in a dedicated [wiki page](https://github.com/semihalf/edk2-platforms/wiki).
--
2.29.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#80933): https://edk2.groups.io/g/devel/message/80933
Mute This Topic: https://groups.io/mt/85762840/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-