Since we plan on toggling between XHCI and PCI the PCI
root needs to be in its own SSDT. This is all thats needed
of UEFI. The SMC conduit is provided directly to the running
OS. When the OS detects this PCIe port, on a machine without
a MADT it attempts to connect to the SMC conduit. The RPi
definition doesn't have any power mgmt, and only provides
a description of the root port.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
Platform/RaspberryPi/AcpiTables/AcpiTables.inf | 3 +
Platform/RaspberryPi/AcpiTables/Pci.asl | 237 +++++++++++++++++++++
Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 6 +
3 files changed, 246 insertions(+)
create mode 100644 Platform/RaspberryPi/AcpiTables/Pci.asl
diff --git a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
index f3e8d950c1..da2a6db85f 100644
--- a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
+++ b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
@@ -39,6 +39,7 @@
Pptt.aslc
SsdtThermal.asl
Xhci.asl
+ Pci.asl
[Packages]
ArmPkg/ArmPkg.dec
@@ -59,6 +60,8 @@
gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase
gArmTokenSpaceGuid.PcdGicDistributorBase
gBcm27xxTokenSpaceGuid.PcdBcm27xxPciCpuMmioAdr
+ gBcm27xxTokenSpaceGuid.PcdBcm27xxPciBusMmioAdr
+ gBcm27xxTokenSpaceGuid.PcdBcm27xxPciBusMmioLen
gBcm27xxTokenSpaceGuid.PcdBcm27xxPciRegBase
gBcm27xxTokenSpaceGuid.PcdBcmGenetRegistersAddress
gBcm283xTokenSpaceGuid.PcdBcm283xRegistersAddress
diff --git a/Platform/RaspberryPi/AcpiTables/Pci.asl b/Platform/RaspberryPi/AcpiTables/Pci.asl
new file mode 100644
index 0000000000..34474f13ef
--- /dev/null
+++ b/Platform/RaspberryPi/AcpiTables/Pci.asl
@@ -0,0 +1,237 @@
+/** @file
+ *
+ * Copyright (c) 2019 Linaro, Limited. All rights reserved.
+ * Copyright (c) 2021 Arm
+ *
+ * SPDX-License-Identifier: BSD-2-Clause-Patent
+ *
+ **/
+
+#include <IndustryStandard/Bcm2711.h>
+
+#include "AcpiTables.h"
+
+/*
+ * The following can be used to remove parenthesis from
+ * defined macros that the compiler complains about.
+ */
+#define ISOLATE_ARGS(...) __VA_ARGS__
+#define REMOVE_PARENTHESES(x) ISOLATE_ARGS x
+
+#define SANITIZED_PCIE_CPU_MMIO_WINDOW REMOVE_PARENTHESES(PCIE_CPU_MMIO_WINDOW)
+#define SANITIZED_PCIE_MMIO_LEN REMOVE_PARENTHESES(PCIE_BRIDGE_MMIO_LEN)
+#define SANITIZED_PCIE_PCI_MMIO_BEGIN REMOVE_PARENTHESES(PCIE_TOP_OF_MEM_WIN)
+
+/*
+ * According to UEFI boot log for the VLI device on Pi 4.
+ */
+#define RT_REG_LENGTH 0x1000
+
+// copy paste job from juno
+#define LNK_DEVICE(Unique_Id, Link_Name, irq) \
+ Device(Link_Name) { \
+ Name(_HID, EISAID("PNP0C0F")) \
+ Name(_UID, Unique_Id) \
+ Name(_PRS, ResourceTemplate() { \
+ Interrupt(ResourceProducer, Level, ActiveHigh, Exclusive) { irq } \
+ }) \
+ Method (_CRS, 0) { Return (_PRS) } \
+ Method (_SRS, 1) { } \
+ Method (_DIS) { } \
+ }
+
+#define PRT_ENTRY(Address, Pin, Link) \
+ Package (4) { \
+ Address, /* uses the same format as _ADR */ \
+ Pin, /* The PCI pin number of the device (0-INTA, 1-INTB, 2-INTC, 3-INTD). */ \
+ Link, /* Interrupt allocated via Link device. */ \
+ Zero /* global system interrupt number (no used) */ \
+ }
+#define ROOT_PRT_ENTRY(Pin, Link) PRT_ENTRY(0x0000FFFF, Pin, Link)
+
+DefinitionBlock (__FILE__, "SSDT", 5, "RPIFDN", "RPI4PCIE", 2)
+{
+ Scope (\_SB_)
+ {
+
+ Device (SCB0) {
+ Name (_HID, "ACPI0004")
+ Name (_UID, 0x0)
+ Name (_CCA, 0x0)
+
+ Method (_CRS, 0, Serialized) {
+ // Container devices with _DMA must have _CRS,
+ // meaning SCB0 to provide all resources that
+ // PCI0 consumes (except interrupts).
+ Name (RBUF, ResourceTemplate () {
+ QWordMemory (ResourceProducer,
+ ,
+ MinFixed,
+ MaxFixed,
+ NonCacheable,
+ ReadWrite,
+ 0x0,
+ SANITIZED_PCIE_CPU_MMIO_WINDOW, // MIN
+ SANITIZED_PCIE_CPU_MMIO_WINDOW, // MAX
+ 0x0,
+ 0x1, // LEN
+ ,
+ ,
+ MMIO
+ )
+ })
+ CreateQwordField (RBUF, MMIO._MAX, MMBE)
+ CreateQwordField (RBUF, MMIO._LEN, MMLE)
+ Add (MMBE, RT_REG_LENGTH - 1, MMBE)
+ Add (MMLE, RT_REG_LENGTH - 1, MMLE)
+ Return (RBUF)
+ }
+
+ Name (_DMA, ResourceTemplate() {
+ // PCIe can only DMA to first 3GB with early SOC's
+ // But we keep the restriction on the later ones
+ // To avoid DMA translation problems.
+ QWordMemory (ResourceProducer,
+ ,
+ MinFixed,
+ MaxFixed,
+ NonCacheable,
+ ReadWrite,
+ 0x0,
+ 0x0, // MIN
+ 0xbfffffff, // MAX
+ 0x0, // TRA
+ 0xc0000000, // LEN
+ ,
+ ,
+ )
+ })
+
+ //
+ // PCI Root Complex
+ //
+ LNK_DEVICE(1, LNKA, 175)
+ LNK_DEVICE(2, LNKB, 176)
+ LNK_DEVICE(3, LNKC, 177)
+ LNK_DEVICE(4, LNKD, 178)
+
+ Device(PCI0)
+ {
+ Name(_HID, EISAID("PNP0A08")) // PCI Express Root Bridge
+ Name(_CID, EISAID("PNP0A03")) // Compatible PCI Root Bridge
+ Name(_SEG, Zero) // PCI Segment Group number
+ Name(_BBN, Zero) // PCI Base Bus Number
+ Name(_CCA, 0) // Mark the PCI noncoherent
+
+ // Root Complex 0
+ Device (RP0) {
+ Name(_ADR, 0xF0000000) // Dev 0, Func 0
+ }
+
+ Name (_DMA, ResourceTemplate() {
+ QWordMemory (ResourceConsumer,
+ ,
+ MinFixed,
+ MaxFixed,
+ NonCacheable,
+ ReadWrite,
+ 0x0,
+ 0x0, // MIN
+ 0xbfffffff, // MAX
+ 0x0, // TRA
+ 0xc0000000, // LEN
+ ,
+ ,
+ )
+ })
+
+ // PCI Routing Table
+ Name(_PRT, Package() {
+ ROOT_PRT_ENTRY(0, LNKA), // INTA
+ ROOT_PRT_ENTRY(1, LNKB), // INTB
+ ROOT_PRT_ENTRY(2, LNKC), // INTC
+ ROOT_PRT_ENTRY(3, LNKD), // INTD
+ })
+ // Root complex resources
+ Method (_CRS, 0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ WordBusNumber ( // Bus numbers assigned to this root
+ ResourceProducer,
+ MinFixed, MaxFixed, PosDecode,
+ 0, // AddressGranularity
+ 0, // AddressMinimum - Minimum Bus Number
+ 255, // AddressMaximum - Maximum Bus Number
+ 0, // AddressTranslation - Set to 0
+ 256 // RangeLength - Number of Busses
+ )
+
+ QWordMemory ( // 32-bit BAR Windows in 64-bit addr
+ ResourceProducer, PosDecode,
+ MinFixed, MaxFixed,
+ NonCacheable, ReadWrite, //cacheable? is that right?
+ 0x00000000, // Granularity
+ 0, // SANITIZED_PCIE_PCI_MMIO_BEGIN
+ 1, // SANITIZED_PCIE_MMIO_LEN + SANITIZED_PCIE_PCI_MMIO_BEGIN
+ SANITIZED_PCIE_CPU_MMIO_WINDOW, // SANITIZED_PCIE_PCI_MMIO_BEGIN - SANITIZED_PCIE_CPU_MMIO_WINDOW
+ 2 // SANITIZED_PCIE_MMIO_LEN + 1
+ ,,,MMI1,,TypeTranslation
+ )
+ }) // end Name(RBUF)
+
+ // Work around ASL's inability to add in a resource definition
+ // or for that matter compute the min,max,len properly
+ CreateQwordField (RBUF, MMI1._MIN, MMIB)
+ CreateQwordField (RBUF, MMI1._MAX, MMIE)
+ CreateQwordField (RBUF, MMI1._TRA, MMIT)
+ CreateQwordField (RBUF, MMI1._LEN, MMIL)
+ Add (MMIB, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIB)
+ Add (SANITIZED_PCIE_MMIO_LEN, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIE)
+ Subtract (MMIT, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIT)
+ Add (SANITIZED_PCIE_MMIO_LEN, 1 , MMIL)
+
+ Return (RBUF)
+ } // end Method(_CRS)
+ //
+ // OS Control Handoff
+ //
+ Name(SUPP, Zero) // PCI _OSC Support Field value
+ Name(CTRL, Zero) // PCI _OSC Control Field value
+
+ // See [1] 6.2.10, [2] 4.5
+ Method(_OSC,4) {
+ // Note, This code is very similar to the code in the PCIe firmware
+ // specification which can be used as a reference
+ // Check for proper UUID
+ If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) {
+ // Create DWord-adressable fields from the Capabilities Buffer
+ CreateDWordField(Arg3,0,CDW1)
+ CreateDWordField(Arg3,4,CDW2)
+ CreateDWordField(Arg3,8,CDW3)
+ // Save Capabilities DWord2 & 3
+ Store(CDW2,SUPP)
+ Store(CDW3,CTRL)
+ // Mask out Native HotPlug
+ And(CTRL,0x1E,CTRL)
+ // Always allow native PME, AER (no dependencies)
+ // Never allow SHPC (no SHPC controller in this system)
+ And(CTRL,0x1D,CTRL)
+
+ If(LNotEqual(Arg1,One)) { // Unknown revision
+ Or(CDW1,0x08,CDW1)
+ }
+
+ If(LNotEqual(CDW3,CTRL)) { // Capabilities bits were masked
+ Or(CDW1,0x10,CDW1)
+ }
+ // Update DWORD3 in the buffer
+ Store(CTRL,CDW3)
+ Return(Arg3)
+ } Else {
+ Or(CDW1,4,CDW1) // Unrecognized UUID
+ Return(Arg3)
+ }
+ } // End _OSC
+ } // PCI0
+ } //end SCB0
+ } //end scope sb
+} //end definition block
diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
index 7c5786303d..4c40820858 100644
--- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
+++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
@@ -821,6 +821,12 @@ STATIC CONST NAMESPACE_TABLES SdtTables[] = {
PcdToken(PcdXhciPci),
NULL
},
+ {
+ SIGNATURE_64 ('R', 'P', 'I', '4', 'P', 'C', 'I', 'E'),
+ PcdToken(PcdXhciPci),
+ 0,
+ NULL
+ },
#endif
{ // DSDT
SIGNATURE_64 ('R', 'P', 'I', 0, 0, 0, 0, 0),
--
2.13.7
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#78737): https://edk2.groups.io/g/devel/message/78737
Mute This Topic: https://groups.io/mt/84688699/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
On Thu, 5 Aug 2021 at 18:36, Jeremy Linton <jeremy.linton@arm.com> wrote:
>
> Since we plan on toggling between XHCI and PCI the PCI
> root needs to be in its own SSDT. This is all thats needed
> of UEFI. The SMC conduit is provided directly to the running
> OS. When the OS detects this PCIe port, on a machine without
> a MADT it attempts to connect to the SMC conduit. The RPi
> definition doesn't have any power mgmt, and only provides
> a description of the root port.
>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
> Platform/RaspberryPi/AcpiTables/AcpiTables.inf | 3 +
> Platform/RaspberryPi/AcpiTables/Pci.asl | 237 +++++++++++++++++++++
> Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 6 +
> 3 files changed, 246 insertions(+)
> create mode 100644 Platform/RaspberryPi/AcpiTables/Pci.asl
>
> diff --git a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
> index f3e8d950c1..da2a6db85f 100644
> --- a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
> +++ b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
> @@ -39,6 +39,7 @@
> Pptt.aslc
> SsdtThermal.asl
> Xhci.asl
> + Pci.asl
>
> [Packages]
> ArmPkg/ArmPkg.dec
> @@ -59,6 +60,8 @@
> gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase
> gArmTokenSpaceGuid.PcdGicDistributorBase
> gBcm27xxTokenSpaceGuid.PcdBcm27xxPciCpuMmioAdr
> + gBcm27xxTokenSpaceGuid.PcdBcm27xxPciBusMmioAdr
> + gBcm27xxTokenSpaceGuid.PcdBcm27xxPciBusMmioLen
> gBcm27xxTokenSpaceGuid.PcdBcm27xxPciRegBase
> gBcm27xxTokenSpaceGuid.PcdBcmGenetRegistersAddress
> gBcm283xTokenSpaceGuid.PcdBcm283xRegistersAddress
> diff --git a/Platform/RaspberryPi/AcpiTables/Pci.asl b/Platform/RaspberryPi/AcpiTables/Pci.asl
> new file mode 100644
> index 0000000000..34474f13ef
> --- /dev/null
> +++ b/Platform/RaspberryPi/AcpiTables/Pci.asl
> @@ -0,0 +1,237 @@
> +/** @file
> + *
> + * Copyright (c) 2019 Linaro, Limited. All rights reserved.
> + * Copyright (c) 2021 Arm
> + *
> + * SPDX-License-Identifier: BSD-2-Clause-Patent
> + *
> + **/
> +
> +#include <IndustryStandard/Bcm2711.h>
> +
> +#include "AcpiTables.h"
> +
> +/*
> + * The following can be used to remove parenthesis from
> + * defined macros that the compiler complains about.
> + */
> +#define ISOLATE_ARGS(...) __VA_ARGS__
> +#define REMOVE_PARENTHESES(x) ISOLATE_ARGS x
> +
> +#define SANITIZED_PCIE_CPU_MMIO_WINDOW REMOVE_PARENTHESES(PCIE_CPU_MMIO_WINDOW)
> +#define SANITIZED_PCIE_MMIO_LEN REMOVE_PARENTHESES(PCIE_BRIDGE_MMIO_LEN)
> +#define SANITIZED_PCIE_PCI_MMIO_BEGIN REMOVE_PARENTHESES(PCIE_TOP_OF_MEM_WIN)
> +
> +/*
> + * According to UEFI boot log for the VLI device on Pi 4.
> + */
> +#define RT_REG_LENGTH 0x1000
> +
> +// copy paste job from juno
> +#define LNK_DEVICE(Unique_Id, Link_Name, irq) \
> + Device(Link_Name) { \
> + Name(_HID, EISAID("PNP0C0F")) \
> + Name(_UID, Unique_Id) \
> + Name(_PRS, ResourceTemplate() { \
> + Interrupt(ResourceProducer, Level, ActiveHigh, Exclusive) { irq } \
> + }) \
> + Method (_CRS, 0) { Return (_PRS) } \
> + Method (_SRS, 1) { } \
> + Method (_DIS) { } \
> + }
> +
> +#define PRT_ENTRY(Address, Pin, Link) \
> + Package (4) { \
> + Address, /* uses the same format as _ADR */ \
> + Pin, /* The PCI pin number of the device (0-INTA, 1-INTB, 2-INTC, 3-INTD). */ \
> + Link, /* Interrupt allocated via Link device. */ \
> + Zero /* global system interrupt number (no used) */ \
> + }
> +#define ROOT_PRT_ENTRY(Pin, Link) PRT_ENTRY(0x0000FFFF, Pin, Link)
> +
This can be done in a much simpler way - SynQuacer uses this, for instance
Name (_PRT, Package () {
Package () { 0xFFFF, 0, Zero, 222 }, // INTA
Package () { 0xFFFF, 1, Zero, 222 }, // INTB
Package () { 0xFFFF, 2, Zero, 222 }, // INTC
Package () { 0xFFFF, 3, Zero, 222 }, // INTD
})
> +DefinitionBlock (__FILE__, "SSDT", 5, "RPIFDN", "RPI4PCIE", 2)
> +{
> + Scope (\_SB_)
> + {
> +
> + Device (SCB0) {
> + Name (_HID, "ACPI0004")
> + Name (_UID, 0x0)
Even if this file and the xhci one should never be exposed to the OS
at the same time, can we please use unique UIDs?
> + Name (_CCA, 0x0)
> +
> + Method (_CRS, 0, Serialized) {
> + // Container devices with _DMA must have _CRS,
> + // meaning SCB0 to provide all resources that
> + // PCI0 consumes (except interrupts).
> + Name (RBUF, ResourceTemplate () {
> + QWordMemory (ResourceProducer,
> + ,
> + MinFixed,
> + MaxFixed,
> + NonCacheable,
> + ReadWrite,
> + 0x0,
> + SANITIZED_PCIE_CPU_MMIO_WINDOW, // MIN
> + SANITIZED_PCIE_CPU_MMIO_WINDOW, // MAX
> + 0x0,
> + 0x1, // LEN
> + ,
> + ,
> + MMIO
> + )
> + })
> + CreateQwordField (RBUF, MMIO._MAX, MMBE)
> + CreateQwordField (RBUF, MMIO._LEN, MMLE)
> + Add (MMBE, RT_REG_LENGTH - 1, MMBE)
> + Add (MMLE, RT_REG_LENGTH - 1, MMLE)
> + Return (RBUF)
> + }
> +
> + Name (_DMA, ResourceTemplate() {
> + // PCIe can only DMA to first 3GB with early SOC's
> + // But we keep the restriction on the later ones
> + // To avoid DMA translation problems.
> + QWordMemory (ResourceProducer,
> + ,
> + MinFixed,
> + MaxFixed,
> + NonCacheable,
> + ReadWrite,
> + 0x0,
> + 0x0, // MIN
> + 0xbfffffff, // MAX
> + 0x0, // TRA
> + 0xc0000000, // LEN
> + ,
> + ,
> + )
> + })
> +
> + //
> + // PCI Root Complex
> + //
> + LNK_DEVICE(1, LNKA, 175)
> + LNK_DEVICE(2, LNKB, 176)
> + LNK_DEVICE(3, LNKC, 177)
> + LNK_DEVICE(4, LNKD, 178)
> +
> + Device(PCI0)
> + {
> + Name(_HID, EISAID("PNP0A08")) // PCI Express Root Bridge
> + Name(_CID, EISAID("PNP0A03")) // Compatible PCI Root Bridge
> + Name(_SEG, Zero) // PCI Segment Group number
> + Name(_BBN, Zero) // PCI Base Bus Number
> + Name(_CCA, 0) // Mark the PCI noncoherent
> +
> + // Root Complex 0
> + Device (RP0) {
> + Name(_ADR, 0xF0000000) // Dev 0, Func 0
> + }
> +
Can we just drop this?
> + Name (_DMA, ResourceTemplate() {
> + QWordMemory (ResourceConsumer,
> + ,
> + MinFixed,
> + MaxFixed,
> + NonCacheable,
> + ReadWrite,
> + 0x0,
> + 0x0, // MIN
> + 0xbfffffff, // MAX
> + 0x0, // TRA
> + 0xc0000000, // LEN
> + ,
> + ,
> + )
> + })
> +
Do we need this method on the host bridge device as well as on the container?
> + // PCI Routing Table
> + Name(_PRT, Package() {
> + ROOT_PRT_ENTRY(0, LNKA), // INTA
> + ROOT_PRT_ENTRY(1, LNKB), // INTB
> + ROOT_PRT_ENTRY(2, LNKC), // INTC
> + ROOT_PRT_ENTRY(3, LNKD), // INTD
> + })
> + // Root complex resources
> + Method (_CRS, 0, Serialized) {
> + Name (RBUF, ResourceTemplate () {
> + WordBusNumber ( // Bus numbers assigned to this root
> + ResourceProducer,
> + MinFixed, MaxFixed, PosDecode,
> + 0, // AddressGranularity
> + 0, // AddressMinimum - Minimum Bus Number
> + 255, // AddressMaximum - Maximum Bus Number
> + 0, // AddressTranslation - Set to 0
> + 256 // RangeLength - Number of Busses
> + )
> +
> + QWordMemory ( // 32-bit BAR Windows in 64-bit addr
> + ResourceProducer, PosDecode,
> + MinFixed, MaxFixed,
> + NonCacheable, ReadWrite, //cacheable? is that right?
> + 0x00000000, // Granularity
> + 0, // SANITIZED_PCIE_PCI_MMIO_BEGIN
> + 1, // SANITIZED_PCIE_MMIO_LEN + SANITIZED_PCIE_PCI_MMIO_BEGIN
> + SANITIZED_PCIE_CPU_MMIO_WINDOW, // SANITIZED_PCIE_PCI_MMIO_BEGIN - SANITIZED_PCIE_CPU_MMIO_WINDOW
> + 2 // SANITIZED_PCIE_MMIO_LEN + 1
> + ,,,MMI1,,TypeTranslation
> + )
> + }) // end Name(RBUF)
> +
> + // Work around ASL's inability to add in a resource definition
> + // or for that matter compute the min,max,len properly
> + CreateQwordField (RBUF, MMI1._MIN, MMIB)
> + CreateQwordField (RBUF, MMI1._MAX, MMIE)
> + CreateQwordField (RBUF, MMI1._TRA, MMIT)
> + CreateQwordField (RBUF, MMI1._LEN, MMIL)
> + Add (MMIB, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIB)
> + Add (SANITIZED_PCIE_MMIO_LEN, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIE)
> + Subtract (MMIT, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIT)
> + Add (SANITIZED_PCIE_MMIO_LEN, 1 , MMIL)
> +
> + Return (RBUF)
> + } // end Method(_CRS)
> + //
> + // OS Control Handoff
> + //
> + Name(SUPP, Zero) // PCI _OSC Support Field value
> + Name(CTRL, Zero) // PCI _OSC Control Field value
> +
> + // See [1] 6.2.10, [2] 4.5
> + Method(_OSC,4) {
> + // Note, This code is very similar to the code in the PCIe firmware
> + // specification which can be used as a reference
> + // Check for proper UUID
> + If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) {
> + // Create DWord-adressable fields from the Capabilities Buffer
> + CreateDWordField(Arg3,0,CDW1)
> + CreateDWordField(Arg3,4,CDW2)
> + CreateDWordField(Arg3,8,CDW3)
> + // Save Capabilities DWord2 & 3
> + Store(CDW2,SUPP)
> + Store(CDW3,CTRL)
> + // Mask out Native HotPlug
> + And(CTRL,0x1E,CTRL)
> + // Always allow native PME, AER (no dependencies)
> + // Never allow SHPC (no SHPC controller in this system)
> + And(CTRL,0x1D,CTRL)
> +
> + If(LNotEqual(Arg1,One)) { // Unknown revision
> + Or(CDW1,0x08,CDW1)
> + }
> +
> + If(LNotEqual(CDW3,CTRL)) { // Capabilities bits were masked
> + Or(CDW1,0x10,CDW1)
> + }
> + // Update DWORD3 in the buffer
> + Store(CTRL,CDW3)
> + Return(Arg3)
> + } Else {
> + Or(CDW1,4,CDW1) // Unrecognized UUID
> + Return(Arg3)
> + }
> + } // End _OSC
> + } // PCI0
> + } //end SCB0
> + } //end scope sb
> +} //end definition block
> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> index 7c5786303d..4c40820858 100644
> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> @@ -821,6 +821,12 @@ STATIC CONST NAMESPACE_TABLES SdtTables[] = {
> PcdToken(PcdXhciPci),
> NULL
> },
> + {
> + SIGNATURE_64 ('R', 'P', 'I', '4', 'P', 'C', 'I', 'E'),
> + PcdToken(PcdXhciPci),
> + 0,
> + NULL
> + },
> #endif
> { // DSDT
> SIGNATURE_64 ('R', 'P', 'I', 0, 0, 0, 0, 0),
> --
> 2.13.7
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#78799): https://edk2.groups.io/g/devel/message/78799
Mute This Topic: https://groups.io/mt/84688699/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
Hi,
So I've tested with all the comments below and everything seems to be
working fine, so no issues there. I will re-post RSN.
Thanks,
On 8/6/21 8:42 AM, Ard Biesheuvel via groups.io wrote:
> On Thu, 5 Aug 2021 at 18:36, Jeremy Linton <jeremy.linton@arm.com> wrote:
>>
>> Since we plan on toggling between XHCI and PCI the PCI
>> root needs to be in its own SSDT. This is all thats needed
>> of UEFI. The SMC conduit is provided directly to the running
>> OS. When the OS detects this PCIe port, on a machine without
>> a MADT it attempts to connect to the SMC conduit. The RPi
>> definition doesn't have any power mgmt, and only provides
>> a description of the root port.
>>
>> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
>> ---
>> Platform/RaspberryPi/AcpiTables/AcpiTables.inf | 3 +
>> Platform/RaspberryPi/AcpiTables/Pci.asl | 237 +++++++++++++++++++++
>> Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 6 +
>> 3 files changed, 246 insertions(+)
>> create mode 100644 Platform/RaspberryPi/AcpiTables/Pci.asl
>>
>> diff --git a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
>> index f3e8d950c1..da2a6db85f 100644
>> --- a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
>> +++ b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
>> @@ -39,6 +39,7 @@
>> Pptt.aslc
>> SsdtThermal.asl
>> Xhci.asl
>> + Pci.asl
>>
>> [Packages]
>> ArmPkg/ArmPkg.dec
>> @@ -59,6 +60,8 @@
>> gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase
>> gArmTokenSpaceGuid.PcdGicDistributorBase
>> gBcm27xxTokenSpaceGuid.PcdBcm27xxPciCpuMmioAdr
>> + gBcm27xxTokenSpaceGuid.PcdBcm27xxPciBusMmioAdr
>> + gBcm27xxTokenSpaceGuid.PcdBcm27xxPciBusMmioLen
>> gBcm27xxTokenSpaceGuid.PcdBcm27xxPciRegBase
>> gBcm27xxTokenSpaceGuid.PcdBcmGenetRegistersAddress
>> gBcm283xTokenSpaceGuid.PcdBcm283xRegistersAddress
>> diff --git a/Platform/RaspberryPi/AcpiTables/Pci.asl b/Platform/RaspberryPi/AcpiTables/Pci.asl
>> new file mode 100644
>> index 0000000000..34474f13ef
>> --- /dev/null
>> +++ b/Platform/RaspberryPi/AcpiTables/Pci.asl
>> @@ -0,0 +1,237 @@
>> +/** @file
>> + *
>> + * Copyright (c) 2019 Linaro, Limited. All rights reserved.
>> + * Copyright (c) 2021 Arm
>> + *
>> + * SPDX-License-Identifier: BSD-2-Clause-Patent
>> + *
>> + **/
>> +
>> +#include <IndustryStandard/Bcm2711.h>
>> +
>> +#include "AcpiTables.h"
>> +
>> +/*
>> + * The following can be used to remove parenthesis from
>> + * defined macros that the compiler complains about.
>> + */
>> +#define ISOLATE_ARGS(...) __VA_ARGS__
>> +#define REMOVE_PARENTHESES(x) ISOLATE_ARGS x
>> +
>> +#define SANITIZED_PCIE_CPU_MMIO_WINDOW REMOVE_PARENTHESES(PCIE_CPU_MMIO_WINDOW)
>> +#define SANITIZED_PCIE_MMIO_LEN REMOVE_PARENTHESES(PCIE_BRIDGE_MMIO_LEN)
>> +#define SANITIZED_PCIE_PCI_MMIO_BEGIN REMOVE_PARENTHESES(PCIE_TOP_OF_MEM_WIN)
>> +
>> +/*
>> + * According to UEFI boot log for the VLI device on Pi 4.
>> + */
>> +#define RT_REG_LENGTH 0x1000
>> +
>> +// copy paste job from juno
>> +#define LNK_DEVICE(Unique_Id, Link_Name, irq) \
>> + Device(Link_Name) { \
>> + Name(_HID, EISAID("PNP0C0F")) \
>> + Name(_UID, Unique_Id) \
>> + Name(_PRS, ResourceTemplate() { \
>> + Interrupt(ResourceProducer, Level, ActiveHigh, Exclusive) { irq } \
>> + }) \
>> + Method (_CRS, 0) { Return (_PRS) } \
>> + Method (_SRS, 1) { } \
>> + Method (_DIS) { } \
>> + }
>> +
>> +#define PRT_ENTRY(Address, Pin, Link) \
>> + Package (4) { \
>> + Address, /* uses the same format as _ADR */ \
>> + Pin, /* The PCI pin number of the device (0-INTA, 1-INTB, 2-INTC, 3-INTD). */ \
>> + Link, /* Interrupt allocated via Link device. */ \
>> + Zero /* global system interrupt number (no used) */ \
>> + }
>> +#define ROOT_PRT_ENTRY(Pin, Link) PRT_ENTRY(0x0000FFFF, Pin, Link)
>> +
>
> This can be done in a much simpler way - SynQuacer uses this, for instance
>
> Name (_PRT, Package () {
> Package () { 0xFFFF, 0, Zero, 222 }, // INTA
> Package () { 0xFFFF, 1, Zero, 222 }, // INTB
> Package () { 0xFFFF, 2, Zero, 222 }, // INTC
> Package () { 0xFFFF, 3, Zero, 222 }, // INTD
> })
>
>> +DefinitionBlock (__FILE__, "SSDT", 5, "RPIFDN", "RPI4PCIE", 2)
>> +{
>> + Scope (\_SB_)
>> + {
>> +
>> + Device (SCB0) {
>> + Name (_HID, "ACPI0004")
>> + Name (_UID, 0x0)
>
> Even if this file and the xhci one should never be exposed to the OS
> at the same time, can we please use unique UIDs?
>
>
>> + Name (_CCA, 0x0)
>> +
>> + Method (_CRS, 0, Serialized) {
>> + // Container devices with _DMA must have _CRS,
>> + // meaning SCB0 to provide all resources that
>> + // PCI0 consumes (except interrupts).
>> + Name (RBUF, ResourceTemplate () {
>> + QWordMemory (ResourceProducer,
>> + ,
>> + MinFixed,
>> + MaxFixed,
>> + NonCacheable,
>> + ReadWrite,
>> + 0x0,
>> + SANITIZED_PCIE_CPU_MMIO_WINDOW, // MIN
>> + SANITIZED_PCIE_CPU_MMIO_WINDOW, // MAX
>> + 0x0,
>> + 0x1, // LEN
>> + ,
>> + ,
>> + MMIO
>> + )
>> + })
>> + CreateQwordField (RBUF, MMIO._MAX, MMBE)
>> + CreateQwordField (RBUF, MMIO._LEN, MMLE)
>> + Add (MMBE, RT_REG_LENGTH - 1, MMBE)
>> + Add (MMLE, RT_REG_LENGTH - 1, MMLE)
>> + Return (RBUF)
>> + }
>> +
>> + Name (_DMA, ResourceTemplate() {
>> + // PCIe can only DMA to first 3GB with early SOC's
>> + // But we keep the restriction on the later ones
>> + // To avoid DMA translation problems.
>> + QWordMemory (ResourceProducer,
>> + ,
>> + MinFixed,
>> + MaxFixed,
>> + NonCacheable,
>> + ReadWrite,
>> + 0x0,
>> + 0x0, // MIN
>> + 0xbfffffff, // MAX
>> + 0x0, // TRA
>> + 0xc0000000, // LEN
>> + ,
>> + ,
>> + )
>> + })
>> +
>> + //
>> + // PCI Root Complex
>> + //
>> + LNK_DEVICE(1, LNKA, 175)
>> + LNK_DEVICE(2, LNKB, 176)
>> + LNK_DEVICE(3, LNKC, 177)
>> + LNK_DEVICE(4, LNKD, 178)
>> +
>> + Device(PCI0)
>> + {
>> + Name(_HID, EISAID("PNP0A08")) // PCI Express Root Bridge
>> + Name(_CID, EISAID("PNP0A03")) // Compatible PCI Root Bridge
>> + Name(_SEG, Zero) // PCI Segment Group number
>> + Name(_BBN, Zero) // PCI Base Bus Number
>> + Name(_CCA, 0) // Mark the PCI noncoherent
>> +
>> + // Root Complex 0
>> + Device (RP0) {
>> + Name(_ADR, 0xF0000000) // Dev 0, Func 0
>> + }
>> +
>
> Can we just drop this?
>
>> + Name (_DMA, ResourceTemplate() {
>> + QWordMemory (ResourceConsumer,
>> + ,
>> + MinFixed,
>> + MaxFixed,
>> + NonCacheable,
>> + ReadWrite,
>> + 0x0,
>> + 0x0, // MIN
>> + 0xbfffffff, // MAX
>> + 0x0, // TRA
>> + 0xc0000000, // LEN
>> + ,
>> + ,
>> + )
>> + })
>> +
>
> Do we need this method on the host bridge device as well as on the container?
>
>> + // PCI Routing Table
>> + Name(_PRT, Package() {
>> + ROOT_PRT_ENTRY(0, LNKA), // INTA
>> + ROOT_PRT_ENTRY(1, LNKB), // INTB
>> + ROOT_PRT_ENTRY(2, LNKC), // INTC
>> + ROOT_PRT_ENTRY(3, LNKD), // INTD
>> + })
>> + // Root complex resources
>> + Method (_CRS, 0, Serialized) {
>> + Name (RBUF, ResourceTemplate () {
>> + WordBusNumber ( // Bus numbers assigned to this root
>> + ResourceProducer,
>> + MinFixed, MaxFixed, PosDecode,
>> + 0, // AddressGranularity
>> + 0, // AddressMinimum - Minimum Bus Number
>> + 255, // AddressMaximum - Maximum Bus Number
>> + 0, // AddressTranslation - Set to 0
>> + 256 // RangeLength - Number of Busses
>> + )
>> +
>> + QWordMemory ( // 32-bit BAR Windows in 64-bit addr
>> + ResourceProducer, PosDecode,
>> + MinFixed, MaxFixed,
>> + NonCacheable, ReadWrite, //cacheable? is that right?
>> + 0x00000000, // Granularity
>> + 0, // SANITIZED_PCIE_PCI_MMIO_BEGIN
>> + 1, // SANITIZED_PCIE_MMIO_LEN + SANITIZED_PCIE_PCI_MMIO_BEGIN
>> + SANITIZED_PCIE_CPU_MMIO_WINDOW, // SANITIZED_PCIE_PCI_MMIO_BEGIN - SANITIZED_PCIE_CPU_MMIO_WINDOW
>> + 2 // SANITIZED_PCIE_MMIO_LEN + 1
>> + ,,,MMI1,,TypeTranslation
>> + )
>> + }) // end Name(RBUF)
>> +
>> + // Work around ASL's inability to add in a resource definition
>> + // or for that matter compute the min,max,len properly
>> + CreateQwordField (RBUF, MMI1._MIN, MMIB)
>> + CreateQwordField (RBUF, MMI1._MAX, MMIE)
>> + CreateQwordField (RBUF, MMI1._TRA, MMIT)
>> + CreateQwordField (RBUF, MMI1._LEN, MMIL)
>> + Add (MMIB, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIB)
>> + Add (SANITIZED_PCIE_MMIO_LEN, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIE)
>> + Subtract (MMIT, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIT)
>> + Add (SANITIZED_PCIE_MMIO_LEN, 1 , MMIL)
>> +
>> + Return (RBUF)
>> + } // end Method(_CRS)
>> + //
>> + // OS Control Handoff
>> + //
>> + Name(SUPP, Zero) // PCI _OSC Support Field value
>> + Name(CTRL, Zero) // PCI _OSC Control Field value
>> +
>> + // See [1] 6.2.10, [2] 4.5
>> + Method(_OSC,4) {
>> + // Note, This code is very similar to the code in the PCIe firmware
>> + // specification which can be used as a reference
>> + // Check for proper UUID
>> + If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) {
>> + // Create DWord-adressable fields from the Capabilities Buffer
>> + CreateDWordField(Arg3,0,CDW1)
>> + CreateDWordField(Arg3,4,CDW2)
>> + CreateDWordField(Arg3,8,CDW3)
>> + // Save Capabilities DWord2 & 3
>> + Store(CDW2,SUPP)
>> + Store(CDW3,CTRL)
>> + // Mask out Native HotPlug
>> + And(CTRL,0x1E,CTRL)
>> + // Always allow native PME, AER (no dependencies)
>> + // Never allow SHPC (no SHPC controller in this system)
>> + And(CTRL,0x1D,CTRL)
>> +
>> + If(LNotEqual(Arg1,One)) { // Unknown revision
>> + Or(CDW1,0x08,CDW1)
>> + }
>> +
>> + If(LNotEqual(CDW3,CTRL)) { // Capabilities bits were masked
>> + Or(CDW1,0x10,CDW1)
>> + }
>> + // Update DWORD3 in the buffer
>> + Store(CTRL,CDW3)
>> + Return(Arg3)
>> + } Else {
>> + Or(CDW1,4,CDW1) // Unrecognized UUID
>> + Return(Arg3)
>> + }
>> + } // End _OSC
>> + } // PCI0
>> + } //end SCB0
>> + } //end scope sb
>> +} //end definition block
>> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> index 7c5786303d..4c40820858 100644
>> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> @@ -821,6 +821,12 @@ STATIC CONST NAMESPACE_TABLES SdtTables[] = {Yah, I will fix that.
>> PcdToken(PcdXhciPci),
>> NULL
>> },
>> + {
>> + SIGNATURE_64 ('R', 'P', 'I', '4', 'P', 'C', 'I', 'E'),
>> + PcdToken(PcdXhciPci),
>> + 0,
>> + NULL
>> + },
>> #endif
>> { // DSDT
>> SIGNATURE_64 ('R', 'P', 'I', 0, 0, 0, 0, 0),
>> --
>> 2.13.7
>>
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#78833): https://edk2.groups.io/g/devel/message/78833
Mute This Topic: https://groups.io/mt/84688699/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
Hi Jeremy,
MADT -> MCFG (and in other patches as well, where you refer to MADT)
The other feedback that Ard provided makes sense to me as well.
A
--
Andrei Warkentin,
Arm Enablement Architect,
Cloud Platform Business Unit, VMware
________________________________
From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
Sent: Thursday, August 5, 2021 7:35 PM
To: devel@edk2.groups.io <devel@edk2.groups.io>
Cc: pete@akeo.ie <pete@akeo.ie>; ardb+tianocore@kernel.org <ardb+tianocore@kernel.org>; Andrei Warkentin <awarkentin@vmware.com>; Sunny.Wang@arm.com <Sunny.Wang@arm.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
Subject: [edk2-devel] [PATCH 3/5] Platform/RaspberryPi: Add PCIe SSDT
Since we plan on toggling between XHCI and PCI the PCI
root needs to be in its own SSDT. This is all thats needed
of UEFI. The SMC conduit is provided directly to the running
OS. When the OS detects this PCIe port, on a machine without
a MADT it attempts to connect to the SMC conduit. The RPi
definition doesn't have any power mgmt, and only provides
a description of the root port.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
Platform/RaspberryPi/AcpiTables/AcpiTables.inf | 3 +
Platform/RaspberryPi/AcpiTables/Pci.asl | 237 +++++++++++++++++++++
Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 6 +
3 files changed, 246 insertions(+)
create mode 100644 Platform/RaspberryPi/AcpiTables/Pci.asl
diff --git a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
index f3e8d950c1..da2a6db85f 100644
--- a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
+++ b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
@@ -39,6 +39,7 @@
Pptt.aslc
SsdtThermal.asl
Xhci.asl
+ Pci.asl
[Packages]
ArmPkg/ArmPkg.dec
@@ -59,6 +60,8 @@
gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase
gArmTokenSpaceGuid.PcdGicDistributorBase
gBcm27xxTokenSpaceGuid.PcdBcm27xxPciCpuMmioAdr
+ gBcm27xxTokenSpaceGuid.PcdBcm27xxPciBusMmioAdr
+ gBcm27xxTokenSpaceGuid.PcdBcm27xxPciBusMmioLen
gBcm27xxTokenSpaceGuid.PcdBcm27xxPciRegBase
gBcm27xxTokenSpaceGuid.PcdBcmGenetRegistersAddress
gBcm283xTokenSpaceGuid.PcdBcm283xRegistersAddress
diff --git a/Platform/RaspberryPi/AcpiTables/Pci.asl b/Platform/RaspberryPi/AcpiTables/Pci.asl
new file mode 100644
index 0000000000..34474f13ef
--- /dev/null
+++ b/Platform/RaspberryPi/AcpiTables/Pci.asl
@@ -0,0 +1,237 @@
+/** @file
+ *
+ * Copyright (c) 2019 Linaro, Limited. All rights reserved.
+ * Copyright (c) 2021 Arm
+ *
+ * SPDX-License-Identifier: BSD-2-Clause-Patent
+ *
+ **/
+
+#include <IndustryStandard/Bcm2711.h>
+
+#include "AcpiTables.h"
+
+/*
+ * The following can be used to remove parenthesis from
+ * defined macros that the compiler complains about.
+ */
+#define ISOLATE_ARGS(...) __VA_ARGS__
+#define REMOVE_PARENTHESES(x) ISOLATE_ARGS x
+
+#define SANITIZED_PCIE_CPU_MMIO_WINDOW REMOVE_PARENTHESES(PCIE_CPU_MMIO_WINDOW)
+#define SANITIZED_PCIE_MMIO_LEN REMOVE_PARENTHESES(PCIE_BRIDGE_MMIO_LEN)
+#define SANITIZED_PCIE_PCI_MMIO_BEGIN REMOVE_PARENTHESES(PCIE_TOP_OF_MEM_WIN)
+
+/*
+ * According to UEFI boot log for the VLI device on Pi 4.
+ */
+#define RT_REG_LENGTH 0x1000
+
+// copy paste job from juno
+#define LNK_DEVICE(Unique_Id, Link_Name, irq) \
+ Device(Link_Name) { \
+ Name(_HID, EISAID("PNP0C0F")) \
+ Name(_UID, Unique_Id) \
+ Name(_PRS, ResourceTemplate() { \
+ Interrupt(ResourceProducer, Level, ActiveHigh, Exclusive) { irq } \
+ }) \
+ Method (_CRS, 0) { Return (_PRS) } \
+ Method (_SRS, 1) { } \
+ Method (_DIS) { } \
+ }
+
+#define PRT_ENTRY(Address, Pin, Link) \
+ Package (4) { \
+ Address, /* uses the same format as _ADR */ \
+ Pin, /* The PCI pin number of the device (0-INTA, 1-INTB, 2-INTC, 3-INTD). */ \
+ Link, /* Interrupt allocated via Link device. */ \
+ Zero /* global system interrupt number (no used) */ \
+ }
+#define ROOT_PRT_ENTRY(Pin, Link) PRT_ENTRY(0x0000FFFF, Pin, Link)
+
+DefinitionBlock (__FILE__, "SSDT", 5, "RPIFDN", "RPI4PCIE", 2)
+{
+ Scope (\_SB_)
+ {
+
+ Device (SCB0) {
+ Name (_HID, "ACPI0004")
+ Name (_UID, 0x0)
+ Name (_CCA, 0x0)
+
+ Method (_CRS, 0, Serialized) {
+ // Container devices with _DMA must have _CRS,
+ // meaning SCB0 to provide all resources that
+ // PCI0 consumes (except interrupts).
+ Name (RBUF, ResourceTemplate () {
+ QWordMemory (ResourceProducer,
+ ,
+ MinFixed,
+ MaxFixed,
+ NonCacheable,
+ ReadWrite,
+ 0x0,
+ SANITIZED_PCIE_CPU_MMIO_WINDOW, // MIN
+ SANITIZED_PCIE_CPU_MMIO_WINDOW, // MAX
+ 0x0,
+ 0x1, // LEN
+ ,
+ ,
+ MMIO
+ )
+ })
+ CreateQwordField (RBUF, MMIO._MAX, MMBE)
+ CreateQwordField (RBUF, MMIO._LEN, MMLE)
+ Add (MMBE, RT_REG_LENGTH - 1, MMBE)
+ Add (MMLE, RT_REG_LENGTH - 1, MMLE)
+ Return (RBUF)
+ }
+
+ Name (_DMA, ResourceTemplate() {
+ // PCIe can only DMA to first 3GB with early SOC's
+ // But we keep the restriction on the later ones
+ // To avoid DMA translation problems.
+ QWordMemory (ResourceProducer,
+ ,
+ MinFixed,
+ MaxFixed,
+ NonCacheable,
+ ReadWrite,
+ 0x0,
+ 0x0, // MIN
+ 0xbfffffff, // MAX
+ 0x0, // TRA
+ 0xc0000000, // LEN
+ ,
+ ,
+ )
+ })
+
+ //
+ // PCI Root Complex
+ //
+ LNK_DEVICE(1, LNKA, 175)
+ LNK_DEVICE(2, LNKB, 176)
+ LNK_DEVICE(3, LNKC, 177)
+ LNK_DEVICE(4, LNKD, 178)
+
+ Device(PCI0)
+ {
+ Name(_HID, EISAID("PNP0A08")) // PCI Express Root Bridge
+ Name(_CID, EISAID("PNP0A03")) // Compatible PCI Root Bridge
+ Name(_SEG, Zero) // PCI Segment Group number
+ Name(_BBN, Zero) // PCI Base Bus Number
+ Name(_CCA, 0) // Mark the PCI noncoherent
+
+ // Root Complex 0
+ Device (RP0) {
+ Name(_ADR, 0xF0000000) // Dev 0, Func 0
+ }
+
+ Name (_DMA, ResourceTemplate() {
+ QWordMemory (ResourceConsumer,
+ ,
+ MinFixed,
+ MaxFixed,
+ NonCacheable,
+ ReadWrite,
+ 0x0,
+ 0x0, // MIN
+ 0xbfffffff, // MAX
+ 0x0, // TRA
+ 0xc0000000, // LEN
+ ,
+ ,
+ )
+ })
+
+ // PCI Routing Table
+ Name(_PRT, Package() {
+ ROOT_PRT_ENTRY(0, LNKA), // INTA
+ ROOT_PRT_ENTRY(1, LNKB), // INTB
+ ROOT_PRT_ENTRY(2, LNKC), // INTC
+ ROOT_PRT_ENTRY(3, LNKD), // INTD
+ })
+ // Root complex resources
+ Method (_CRS, 0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ WordBusNumber ( // Bus numbers assigned to this root
+ ResourceProducer,
+ MinFixed, MaxFixed, PosDecode,
+ 0, // AddressGranularity
+ 0, // AddressMinimum - Minimum Bus Number
+ 255, // AddressMaximum - Maximum Bus Number
+ 0, // AddressTranslation - Set to 0
+ 256 // RangeLength - Number of Busses
+ )
+
+ QWordMemory ( // 32-bit BAR Windows in 64-bit addr
+ ResourceProducer, PosDecode,
+ MinFixed, MaxFixed,
+ NonCacheable, ReadWrite, //cacheable? is that right?
+ 0x00000000, // Granularity
+ 0, // SANITIZED_PCIE_PCI_MMIO_BEGIN
+ 1, // SANITIZED_PCIE_MMIO_LEN + SANITIZED_PCIE_PCI_MMIO_BEGIN
+ SANITIZED_PCIE_CPU_MMIO_WINDOW, // SANITIZED_PCIE_PCI_MMIO_BEGIN - SANITIZED_PCIE_CPU_MMIO_WINDOW
+ 2 // SANITIZED_PCIE_MMIO_LEN + 1
+ ,,,MMI1,,TypeTranslation
+ )
+ }) // end Name(RBUF)
+
+ // Work around ASL's inability to add in a resource definition
+ // or for that matter compute the min,max,len properly
+ CreateQwordField (RBUF, MMI1._MIN, MMIB)
+ CreateQwordField (RBUF, MMI1._MAX, MMIE)
+ CreateQwordField (RBUF, MMI1._TRA, MMIT)
+ CreateQwordField (RBUF, MMI1._LEN, MMIL)
+ Add (MMIB, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIB)
+ Add (SANITIZED_PCIE_MMIO_LEN, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIE)
+ Subtract (MMIT, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIT)
+ Add (SANITIZED_PCIE_MMIO_LEN, 1 , MMIL)
+
+ Return (RBUF)
+ } // end Method(_CRS)
+ //
+ // OS Control Handoff
+ //
+ Name(SUPP, Zero) // PCI _OSC Support Field value
+ Name(CTRL, Zero) // PCI _OSC Control Field value
+
+ // See [1] 6.2.10, [2] 4.5
+ Method(_OSC,4) {
+ // Note, This code is very similar to the code in the PCIe firmware
+ // specification which can be used as a reference
+ // Check for proper UUID
+ If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) {
+ // Create DWord-adressable fields from the Capabilities Buffer
+ CreateDWordField(Arg3,0,CDW1)
+ CreateDWordField(Arg3,4,CDW2)
+ CreateDWordField(Arg3,8,CDW3)
+ // Save Capabilities DWord2 & 3
+ Store(CDW2,SUPP)
+ Store(CDW3,CTRL)
+ // Mask out Native HotPlug
+ And(CTRL,0x1E,CTRL)
+ // Always allow native PME, AER (no dependencies)
+ // Never allow SHPC (no SHPC controller in this system)
+ And(CTRL,0x1D,CTRL)
+
+ If(LNotEqual(Arg1,One)) { // Unknown revision
+ Or(CDW1,0x08,CDW1)
+ }
+
+ If(LNotEqual(CDW3,CTRL)) { // Capabilities bits were masked
+ Or(CDW1,0x10,CDW1)
+ }
+ // Update DWORD3 in the buffer
+ Store(CTRL,CDW3)
+ Return(Arg3)
+ } Else {
+ Or(CDW1,4,CDW1) // Unrecognized UUID
+ Return(Arg3)
+ }
+ } // End _OSC
+ } // PCI0
+ } //end SCB0
+ } //end scope sb
+} //end definition block
diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
index 7c5786303d..4c40820858 100644
--- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
+++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
@@ -821,6 +821,12 @@ STATIC CONST NAMESPACE_TABLES SdtTables[] = {
PcdToken(PcdXhciPci),
NULL
},
+ {
+ SIGNATURE_64 ('R', 'P', 'I', '4', 'P', 'C', 'I', 'E'),
+ PcdToken(PcdXhciPci),
+ 0,
+ NULL
+ },
#endif
{ // DSDT
SIGNATURE_64 ('R', 'P', 'I', 0, 0, 0, 0, 0),
--
2.13.7
-=-=-=-=-=-=
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#78737): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F78737&data=04%7C01%7Cawarkentin%40vmware.com%7C991285544b1540eaa12908d9582f2169%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637637781724835660%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=OE2b%2FCjUQIDZcMX%2BrrijX30WNaNI5GyS6h2O9gfPs94%3D&reserved=0
Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F84688699%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C991285544b1540eaa12908d9582f2169%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637637781724835660%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Sg96lV58XqE6pN%2BeL8QXmQnX%2Bc%2BN02lLNHkMVXZpfi4%3D&reserved=0
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C991285544b1540eaa12908d9582f2169%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637637781724835660%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=yRoA%2FnUZ1u8Q1Xryo2r1%2BjWLhYJFk76nvx0aGR36VG8%3D&reserved=0 [awarkentin@vmware.com]
-=-=-=-=-=-=
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#78811): https://edk2.groups.io/g/devel/message/78811
Mute This Topic: https://groups.io/mt/84688699/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
Hi,
On 8/6/21 10:37 AM, Andrei Warkentin wrote:
> Hi Jeremy,
>
> MADT -> MCFG (and in other patches as well, where you refer to MADT)
I will take 4 letter acronyms that start with an M... <chuckle>
Thanks,
> The other feedback that Ard provided makes sense to me as well.
>
> A
>
> --
> Andrei Warkentin,
> Arm Enablement Architect,
> Cloud Platform Business Unit, VMware
> ________________________________
> From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com@groups.io>
> Sent: Thursday, August 5, 2021 7:35 PM
> To: devel@edk2.groups.io <devel@edk2.groups.io>
> Cc: pete@akeo.ie <pete@akeo.ie>; ardb+tianocore@kernel.org <ardb+tianocore@kernel.org>; Andrei Warkentin <awarkentin@vmware.com>; Sunny.Wang@arm.com <Sunny.Wang@arm.com>; samer.el-haj-mahmoud@arm.com <samer.el-haj-mahmoud@arm.com>; Jeremy Linton <jeremy.linton@arm.com>
> Subject: [edk2-devel] [PATCH 3/5] Platform/RaspberryPi: Add PCIe SSDT
>
> Since we plan on toggling between XHCI and PCI the PCI
> root needs to be in its own SSDT. This is all thats needed
> of UEFI. The SMC conduit is provided directly to the running
> OS. When the OS detects this PCIe port, on a machine without
> a MADT it attempts to connect to the SMC conduit. The RPi
> definition doesn't have any power mgmt, and only provides
> a description of the root port.
>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
> Platform/RaspberryPi/AcpiTables/AcpiTables.inf | 3 +
> Platform/RaspberryPi/AcpiTables/Pci.asl | 237 +++++++++++++++++++++
> Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 6 +
> 3 files changed, 246 insertions(+)
> create mode 100644 Platform/RaspberryPi/AcpiTables/Pci.asl
>
> diff --git a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
> index f3e8d950c1..da2a6db85f 100644
> --- a/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
> +++ b/Platform/RaspberryPi/AcpiTables/AcpiTables.inf
> @@ -39,6 +39,7 @@
> Pptt.aslc
> SsdtThermal.asl
> Xhci.asl
> + Pci.asl
>
> [Packages]
> ArmPkg/ArmPkg.dec
> @@ -59,6 +60,8 @@
> gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase
> gArmTokenSpaceGuid.PcdGicDistributorBase
> gBcm27xxTokenSpaceGuid.PcdBcm27xxPciCpuMmioAdr
> + gBcm27xxTokenSpaceGuid.PcdBcm27xxPciBusMmioAdr
> + gBcm27xxTokenSpaceGuid.PcdBcm27xxPciBusMmioLen
> gBcm27xxTokenSpaceGuid.PcdBcm27xxPciRegBase
> gBcm27xxTokenSpaceGuid.PcdBcmGenetRegistersAddress
> gBcm283xTokenSpaceGuid.PcdBcm283xRegistersAddress
> diff --git a/Platform/RaspberryPi/AcpiTables/Pci.asl b/Platform/RaspberryPi/AcpiTables/Pci.asl
> new file mode 100644
> index 0000000000..34474f13ef
> --- /dev/null
> +++ b/Platform/RaspberryPi/AcpiTables/Pci.asl
> @@ -0,0 +1,237 @@
> +/** @file
> + *
> + * Copyright (c) 2019 Linaro, Limited. All rights reserved.
> + * Copyright (c) 2021 Arm
> + *
> + * SPDX-License-Identifier: BSD-2-Clause-Patent
> + *
> + **/
> +
> +#include <IndustryStandard/Bcm2711.h>
> +
> +#include "AcpiTables.h"
> +
> +/*
> + * The following can be used to remove parenthesis from
> + * defined macros that the compiler complains about.
> + */
> +#define ISOLATE_ARGS(...) __VA_ARGS__
> +#define REMOVE_PARENTHESES(x) ISOLATE_ARGS x
> +
> +#define SANITIZED_PCIE_CPU_MMIO_WINDOW REMOVE_PARENTHESES(PCIE_CPU_MMIO_WINDOW)
> +#define SANITIZED_PCIE_MMIO_LEN REMOVE_PARENTHESES(PCIE_BRIDGE_MMIO_LEN)
> +#define SANITIZED_PCIE_PCI_MMIO_BEGIN REMOVE_PARENTHESES(PCIE_TOP_OF_MEM_WIN)
> +
> +/*
> + * According to UEFI boot log for the VLI device on Pi 4.
> + */
> +#define RT_REG_LENGTH 0x1000
> +
> +// copy paste job from juno
> +#define LNK_DEVICE(Unique_Id, Link_Name, irq) \
> + Device(Link_Name) { \
> + Name(_HID, EISAID("PNP0C0F")) \
> + Name(_UID, Unique_Id) \
> + Name(_PRS, ResourceTemplate() { \
> + Interrupt(ResourceProducer, Level, ActiveHigh, Exclusive) { irq } \
> + }) \
> + Method (_CRS, 0) { Return (_PRS) } \
> + Method (_SRS, 1) { } \
> + Method (_DIS) { } \
> + }
> +
> +#define PRT_ENTRY(Address, Pin, Link) \
> + Package (4) { \
> + Address, /* uses the same format as _ADR */ \
> + Pin, /* The PCI pin number of the device (0-INTA, 1-INTB, 2-INTC, 3-INTD). */ \
> + Link, /* Interrupt allocated via Link device. */ \
> + Zero /* global system interrupt number (no used) */ \
> + }
> +#define ROOT_PRT_ENTRY(Pin, Link) PRT_ENTRY(0x0000FFFF, Pin, Link)
> +
> +DefinitionBlock (__FILE__, "SSDT", 5, "RPIFDN", "RPI4PCIE", 2)
> +{
> + Scope (\_SB_)
> + {
> +
> + Device (SCB0) {
> + Name (_HID, "ACPI0004")
> + Name (_UID, 0x0)
> + Name (_CCA, 0x0)
> +
> + Method (_CRS, 0, Serialized) {
> + // Container devices with _DMA must have _CRS,
> + // meaning SCB0 to provide all resources that
> + // PCI0 consumes (except interrupts).
> + Name (RBUF, ResourceTemplate () {
> + QWordMemory (ResourceProducer,
> + ,
> + MinFixed,
> + MaxFixed,
> + NonCacheable,
> + ReadWrite,
> + 0x0,
> + SANITIZED_PCIE_CPU_MMIO_WINDOW, // MIN
> + SANITIZED_PCIE_CPU_MMIO_WINDOW, // MAX
> + 0x0,
> + 0x1, // LEN
> + ,
> + ,
> + MMIO
> + )
> + })
> + CreateQwordField (RBUF, MMIO._MAX, MMBE)
> + CreateQwordField (RBUF, MMIO._LEN, MMLE)
> + Add (MMBE, RT_REG_LENGTH - 1, MMBE)
> + Add (MMLE, RT_REG_LENGTH - 1, MMLE)
> + Return (RBUF)
> + }
> +
> + Name (_DMA, ResourceTemplate() {
> + // PCIe can only DMA to first 3GB with early SOC's
> + // But we keep the restriction on the later ones
> + // To avoid DMA translation problems.
> + QWordMemory (ResourceProducer,
> + ,
> + MinFixed,
> + MaxFixed,
> + NonCacheable,
> + ReadWrite,
> + 0x0,
> + 0x0, // MIN
> + 0xbfffffff, // MAX
> + 0x0, // TRA
> + 0xc0000000, // LEN
> + ,
> + ,
> + )
> + })
> +
> + //
> + // PCI Root Complex
> + //
> + LNK_DEVICE(1, LNKA, 175)
> + LNK_DEVICE(2, LNKB, 176)
> + LNK_DEVICE(3, LNKC, 177)
> + LNK_DEVICE(4, LNKD, 178)
> +
> + Device(PCI0)
> + {
> + Name(_HID, EISAID("PNP0A08")) // PCI Express Root Bridge
> + Name(_CID, EISAID("PNP0A03")) // Compatible PCI Root Bridge
> + Name(_SEG, Zero) // PCI Segment Group number
> + Name(_BBN, Zero) // PCI Base Bus Number
> + Name(_CCA, 0) // Mark the PCI noncoherent
> +
> + // Root Complex 0
> + Device (RP0) {
> + Name(_ADR, 0xF0000000) // Dev 0, Func 0
> + }
> +
> + Name (_DMA, ResourceTemplate() {
> + QWordMemory (ResourceConsumer,
> + ,
> + MinFixed,
> + MaxFixed,
> + NonCacheable,
> + ReadWrite,
> + 0x0,
> + 0x0, // MIN
> + 0xbfffffff, // MAX
> + 0x0, // TRA
> + 0xc0000000, // LEN
> + ,
> + ,
> + )
> + })
> +
> + // PCI Routing Table
> + Name(_PRT, Package() {
> + ROOT_PRT_ENTRY(0, LNKA), // INTA
> + ROOT_PRT_ENTRY(1, LNKB), // INTB
> + ROOT_PRT_ENTRY(2, LNKC), // INTC
> + ROOT_PRT_ENTRY(3, LNKD), // INTD
> + })
> + // Root complex resources
> + Method (_CRS, 0, Serialized) {
> + Name (RBUF, ResourceTemplate () {
> + WordBusNumber ( // Bus numbers assigned to this root
> + ResourceProducer,
> + MinFixed, MaxFixed, PosDecode,
> + 0, // AddressGranularity
> + 0, // AddressMinimum - Minimum Bus Number
> + 255, // AddressMaximum - Maximum Bus Number
> + 0, // AddressTranslation - Set to 0
> + 256 // RangeLength - Number of Busses
> + )
> +
> + QWordMemory ( // 32-bit BAR Windows in 64-bit addr
> + ResourceProducer, PosDecode,
> + MinFixed, MaxFixed,
> + NonCacheable, ReadWrite, //cacheable? is that right?
> + 0x00000000, // Granularity
> + 0, // SANITIZED_PCIE_PCI_MMIO_BEGIN
> + 1, // SANITIZED_PCIE_MMIO_LEN + SANITIZED_PCIE_PCI_MMIO_BEGIN
> + SANITIZED_PCIE_CPU_MMIO_WINDOW, // SANITIZED_PCIE_PCI_MMIO_BEGIN - SANITIZED_PCIE_CPU_MMIO_WINDOW
> + 2 // SANITIZED_PCIE_MMIO_LEN + 1
> + ,,,MMI1,,TypeTranslation
> + )
> + }) // end Name(RBUF)
> +
> + // Work around ASL's inability to add in a resource definition
> + // or for that matter compute the min,max,len properly
> + CreateQwordField (RBUF, MMI1._MIN, MMIB)
> + CreateQwordField (RBUF, MMI1._MAX, MMIE)
> + CreateQwordField (RBUF, MMI1._TRA, MMIT)
> + CreateQwordField (RBUF, MMI1._LEN, MMIL)
> + Add (MMIB, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIB)
> + Add (SANITIZED_PCIE_MMIO_LEN, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIE)
> + Subtract (MMIT, SANITIZED_PCIE_PCI_MMIO_BEGIN, MMIT)
> + Add (SANITIZED_PCIE_MMIO_LEN, 1 , MMIL)
> +
> + Return (RBUF)
> + } // end Method(_CRS)
> + //
> + // OS Control Handoff
> + //
> + Name(SUPP, Zero) // PCI _OSC Support Field value
> + Name(CTRL, Zero) // PCI _OSC Control Field value
> +
> + // See [1] 6.2.10, [2] 4.5
> + Method(_OSC,4) {
> + // Note, This code is very similar to the code in the PCIe firmware
> + // specification which can be used as a reference
> + // Check for proper UUID
> + If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) {
> + // Create DWord-adressable fields from the Capabilities Buffer
> + CreateDWordField(Arg3,0,CDW1)
> + CreateDWordField(Arg3,4,CDW2)
> + CreateDWordField(Arg3,8,CDW3)
> + // Save Capabilities DWord2 & 3
> + Store(CDW2,SUPP)
> + Store(CDW3,CTRL)
> + // Mask out Native HotPlug
> + And(CTRL,0x1E,CTRL)
> + // Always allow native PME, AER (no dependencies)
> + // Never allow SHPC (no SHPC controller in this system)
> + And(CTRL,0x1D,CTRL)
> +
> + If(LNotEqual(Arg1,One)) { // Unknown revision
> + Or(CDW1,0x08,CDW1)
> + }
> +
> + If(LNotEqual(CDW3,CTRL)) { // Capabilities bits were masked
> + Or(CDW1,0x10,CDW1)
> + }
> + // Update DWORD3 in the buffer
> + Store(CTRL,CDW3)
> + Return(Arg3)
> + } Else {
> + Or(CDW1,4,CDW1) // Unrecognized UUID
> + Return(Arg3)
> + }
> + } // End _OSC
> + } // PCI0
> + } //end SCB0
> + } //end scope sb
> +} //end definition block
> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> index 7c5786303d..4c40820858 100644
> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> @@ -821,6 +821,12 @@ STATIC CONST NAMESPACE_TABLES SdtTables[] = {
> PcdToken(PcdXhciPci),
> NULL
> },
> + {
> + SIGNATURE_64 ('R', 'P', 'I', '4', 'P', 'C', 'I', 'E'),
> + PcdToken(PcdXhciPci),
> + 0,
> + NULL
> + },
> #endif
> { // DSDT
> SIGNATURE_64 ('R', 'P', 'I', 0, 0, 0, 0, 0),
> --
> 2.13.7
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#78737): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F78737&data=04%7C01%7Cawarkentin%40vmware.com%7C991285544b1540eaa12908d9582f2169%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637637781724835660%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=OE2b%2FCjUQIDZcMX%2BrrijX30WNaNI5GyS6h2O9gfPs94%3D&reserved=0
> Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F84688699%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C991285544b1540eaa12908d9582f2169%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637637781724835660%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Sg96lV58XqE6pN%2BeL8QXmQnX%2Bc%2BN02lLNHkMVXZpfi4%3D&reserved=0
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C991285544b1540eaa12908d9582f2169%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637637781724835660%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=yRoA%2FnUZ1u8Q1Xryo2r1%2BjWLhYJFk76nvx0aGR36VG8%3D&reserved=0 [awarkentin@vmware.com]
> -=-=-=-=-=-=
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#78832): https://edk2.groups.io/g/devel/message/78832
Mute This Topic: https://groups.io/mt/84688699/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
© 2016 - 2024 Red Hat, Inc.