ArmPlatformPkg: Add support to generate HEST ACPI table

[edk2-devel] [PATCH v2 0/4] ArmPlatformPkg: Add support to generate HEST ACPI table

Posted by Omkar Anand Kulkarni 2 years, 9 months ago

Changes since v1:
- Helper added for HEST ACPI table generation.
- Rebased to the latest upstream code.

Hardware Error Source Table (HEST)[1] and Software Delegated Exception Interface
(SDEI)[2] ACPI tables are used to acomplish firmware first error handling.This
patch series introduces a framework to build and install the HEST ACPI table
dynamically.

The following figure illustrates the possible usage of the dyanamic
generation of HEST ACPI table.

                                    NS | S
+--------------------------------------+--------------------------------------+
|                                      |                                      |
|+-------------------------------------+---------------------+                |
||               +---------------------+--------------------+|                |
||               |                     |                    ||                |
|| +-----------+ |+------------------+ | +-----------------+|| +-------------+|
|| |HestTable  | ||  HestErrorSource | | | HestErrorSource ||| | DMC-620     ||
|| |  DXE      | ||        DXE       | | |  StandaloneMM   ||| |Standalone MM||
|| +-----------+ |+------------------+ | +-----------------+|| +-------------+|
||               |GHESv2               |                    ||                |
||               +---------------------+--------------------+|                |
||          +--------------------+     |                     |                |
||          |PlatformErrorHandler|     |                     |                |
||          |        DXE         |     |                     |                |
||          +--------------------+     |                     |                |
||FF FWK                               |                     |                |
|+-------------------------------------+---------------------+                |
|                                      |                                      |
+--------------------------------------+--------------------------------------+
                                       |
                   Figure: Firmware First Error Handling approach.

All the hardware error sources are added to HEST table as GHESv2[3] error source
descriptors. The framework comprises of following DXE and MM drivers:

- HestTableDxe:
  Builds HEST table header and allows appending error source descriptors to the
  HEST table. Also provides protocol interface to install the built HEST table.

- HestErrorSourceDxe & HestErrorSourceStandaloneMM:
  These two drivers together retrieve all possible error source descriptors of
  type GHESv2 from the MM drivers implementing HEST Error Source Descriptor
  protocol. Once all the descriptors are collected HestErrorSourceDxe appends
  it to HEST table using HestTableDxe driver.
  
- PlatformErrorHandlerDxe:
  Builds and installs SDEI ACPI table. This driver does not initialize(load)
  until HestErrorSourceDxe driver has finished appending all possible GHESv2
  error source descriptors to the HEST table. Once that is complete using the
  HestTableDxe driver it installs the HEST table.

This patch series provides reference implementation for DMC-620 Dynamic Memory
Controller[4] that has RAS feature enabled. This is platform code
implemented as Standalone MM driver in edk2-platforms.

References:
[1] : ACPI 6.3, Table 18-382, Hardware Error Source Table
[2] : SDEI Platform Design Document, revision b, 10 Appendix C, ACPI table
      definitions for SDEI
[3] : ACPI Reference Specification 6.3, Table 18-393 GHESv2 Structure
[4] : DMC620 Dynamic Memory Controller, revision r1p0
[5] : UEFI Reference Specification 2.8, Appendix N - Common Platform Error
      Record
[6] : UEFI Reference Specification 2.8, Section N.2.5 Memory Error Section

Link to github branch with the patches in this series -
https://github.com/omkkul01/edk2/tree/ras_firmware_first_edk2

Omkar Anand Kulkarni (4):
  ArmPlatformPkg: Allow dynamic generation of HEST ACPI table
  ArmPlatformPkg: add definition for MM_HEST_ERROR_SOURCE_DESC_PROTOCOL
  ArmPlatformPkg: retreive error source descriptors from MM
  ArmPlatformPkg: Add helpers for HEST table generation

 ArmPlatformPkg/ArmPlatformPkg.dec             |  12 +
 .../Drivers/Apei/HestDxe/HestDxe.inf          |  49 +++
 .../HestMmErrorSources/HestErrorSourceDxe.inf |  44 +++
 .../HestErrorSourceStandaloneMm.inf           |  51 +++
 .../HestMmErrorSourceCommon.h                 |  37 ++
 ArmPlatformPkg/Include/HestAcpiHeader.h       |  49 +++
 .../Include/Protocol/HestErrorSourceInfo.h    |  64 ++++
 ArmPlatformPkg/Include/Protocol/HestTable.h   |  71 ++++
 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.c | 354 ++++++++++++++++++
 .../HestMmErrorSources/HestErrorSourceDxe.c   | 308 +++++++++++++++
 .../HestErrorSourceStandaloneMm.c             | 312 +++++++++++++++
 11 files changed, 1351 insertions(+)
 create mode 100644 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.inf
 create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.inf
 create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandaloneMm.inf
 create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestMmErrorSourceCommon.h
 create mode 100644 ArmPlatformPkg/Include/HestAcpiHeader.h
 create mode 100644 ArmPlatformPkg/Include/Protocol/HestErrorSourceInfo.h
 create mode 100644 ArmPlatformPkg/Include/Protocol/HestTable.h
 create mode 100644 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.c
 create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.c
 create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandaloneMm.c

-- 
2.17.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#77667): https://edk2.groups.io/g/devel/message/77667
Mute This Topic: https://groups.io/mt/84115237/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [edk2-devel] [PATCH v2 0/4] ArmPlatformPkg: Add support to generate HEST ACPI table

Posted by Sami Mujawar 2 years, 8 months ago

Hi Omkar,

Thank you for this patch series and for the clear explaination below.

The explaination below is very useful for anyone who is trying to 
understand the code.

Since the cover letter will not be part of the patch commit messages, 
would it be possible to include this explanation:

1.  as part of a commit message for one of the patches in this series 
(patch 2/4 or 3/4).

Or

2. in a Readme.md file

Regards,

Sami Mujawar


On 10/07/2021 05:18 PM, Omkar Anand Kulkarni wrote:
> Changes since v1:
> - Helper added for HEST ACPI table generation.
> - Rebased to the latest upstream code.
>
> Hardware Error Source Table (HEST)[1] and Software Delegated Exception Interface
> (SDEI)[2] ACPI tables are used to acomplish firmware first error handling.This
> patch series introduces a framework to build and install the HEST ACPI table
> dynamically.
>
> The following figure illustrates the possible usage of the dyanamic
> generation of HEST ACPI table.
>
>                                      NS | S
> +--------------------------------------+--------------------------------------+
> |                                      |                                      |
> |+-------------------------------------+---------------------+                |
> ||               +---------------------+--------------------+|                |
> ||               |                     |                    ||                |
> || +-----------+ |+------------------+ | +-----------------+|| +-------------+|
> || |HestTable  | ||  HestErrorSource | | | HestErrorSource ||| | DMC-620     ||
> || |  DXE      | ||        DXE       | | |  StandaloneMM   ||| |Standalone MM||
> || +-----------+ |+------------------+ | +-----------------+|| +-------------+|
> ||               |GHESv2               |                    ||                |
> ||               +---------------------+--------------------+|                |
> ||          +--------------------+     |                     |                |
> ||          |PlatformErrorHandler|     |                     |                |
> ||          |        DXE         |     |                     |                |
> ||          +--------------------+     |                     |                |
> ||FF FWK                               |                     |                |
> |+-------------------------------------+---------------------+                |
> |                                      |                                      |
> +--------------------------------------+--------------------------------------+
>                                         |
>                     Figure: Firmware First Error Handling approach.
>
> All the hardware error sources are added to HEST table as GHESv2[3] error source
> descriptors. The framework comprises of following DXE and MM drivers:
>
> - HestTableDxe:
>    Builds HEST table header and allows appending error source descriptors to the
>    HEST table. Also provides protocol interface to install the built HEST table.
>
> - HestErrorSourceDxe & HestErrorSourceStandaloneMM:
>    These two drivers together retrieve all possible error source descriptors of
>    type GHESv2 from the MM drivers implementing HEST Error Source Descriptor
>    protocol. Once all the descriptors are collected HestErrorSourceDxe appends
>    it to HEST table using HestTableDxe driver.
>    
> - PlatformErrorHandlerDxe:
>    Builds and installs SDEI ACPI table. This driver does not initialize(load)
>    until HestErrorSourceDxe driver has finished appending all possible GHESv2
>    error source descriptors to the HEST table. Once that is complete using the
>    HestTableDxe driver it installs the HEST table.
>
> This patch series provides reference implementation for DMC-620 Dynamic Memory
> Controller[4] that has RAS feature enabled. This is platform code
> implemented as Standalone MM driver in edk2-platforms.
>
> References:
> [1] : ACPI 6.3, Table 18-382, Hardware Error Source Table
> [2] : SDEI Platform Design Document, revision b, 10 Appendix C, ACPI table
>        definitions for SDEI
> [3] : ACPI Reference Specification 6.3, Table 18-393 GHESv2 Structure
> [4] : DMC620 Dynamic Memory Controller, revision r1p0
> [5] : UEFI Reference Specification 2.8, Appendix N - Common Platform Error
>        Record
> [6] : UEFI Reference Specification 2.8, Section N.2.5 Memory Error Section
>
> Link to github branch with the patches in this series -
> https://github.com/omkkul01/edk2/tree/ras_firmware_first_edk2
>
> Omkar Anand Kulkarni (4):
>    ArmPlatformPkg: Allow dynamic generation of HEST ACPI table
>    ArmPlatformPkg: add definition for MM_HEST_ERROR_SOURCE_DESC_PROTOCOL
>    ArmPlatformPkg: retreive error source descriptors from MM
>    ArmPlatformPkg: Add helpers for HEST table generation
>
>   ArmPlatformPkg/ArmPlatformPkg.dec             |  12 +
>   .../Drivers/Apei/HestDxe/HestDxe.inf          |  49 +++
>   .../HestMmErrorSources/HestErrorSourceDxe.inf |  44 +++
>   .../HestErrorSourceStandaloneMm.inf           |  51 +++
>   .../HestMmErrorSourceCommon.h                 |  37 ++
>   ArmPlatformPkg/Include/HestAcpiHeader.h       |  49 +++
>   .../Include/Protocol/HestErrorSourceInfo.h    |  64 ++++
>   ArmPlatformPkg/Include/Protocol/HestTable.h   |  71 ++++
>   ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.c | 354 ++++++++++++++++++
>   .../HestMmErrorSources/HestErrorSourceDxe.c   | 308 +++++++++++++++
>   .../HestErrorSourceStandaloneMm.c             | 312 +++++++++++++++
>   11 files changed, 1351 insertions(+)
>   create mode 100644 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.inf
>   create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.inf
>   create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandaloneMm.inf
>   create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestMmErrorSourceCommon.h
>   create mode 100644 ArmPlatformPkg/Include/HestAcpiHeader.h
>   create mode 100644 ArmPlatformPkg/Include/Protocol/HestErrorSourceInfo.h
>   create mode 100644 ArmPlatformPkg/Include/Protocol/HestTable.h
>   create mode 100644 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.c
>   create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.c
>   create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandaloneMm.c
>



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#78523): https://edk2.groups.io/g/devel/message/78523
Mute This Topic: https://groups.io/mt/84115237/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [edk2-devel] [PATCH v2 0/4] ArmPlatformPkg: Add support to generate HEST ACPI table

Posted by Sami Mujawar 2 years, 8 months ago

Hi Omkar,

How did you check that the HEST table is populated correctly?

There is no HEST parser in Acpiview at the moment. Do you plan to add an 
HEST parser to Acpiview?

Regards,

Sami Mujawar


On 02/08/2021 01:49 PM, Sami Mujawar wrote:
> Hi Omkar,
>
> Thank you for this patch series and for the clear explaination below.
>
> The explaination below is very useful for anyone who is trying to 
> understand the code.
>
> Since the cover letter will not be part of the patch commit messages, 
> would it be possible to include this explanation:
>
> 1.  as part of a commit message for one of the patches in this series 
> (patch 2/4 or 3/4).
>
> Or
>
> 2. in a Readme.md file
>
> Regards,
>
> Sami Mujawar
>
>
> On 10/07/2021 05:18 PM, Omkar Anand Kulkarni wrote:
>> Changes since v1:
>> - Helper added for HEST ACPI table generation.
>> - Rebased to the latest upstream code.
>>
>> Hardware Error Source Table (HEST)[1] and Software Delegated 
>> Exception Interface
>> (SDEI)[2] ACPI tables are used to acomplish firmware first error 
>> handling.This
>> patch series introduces a framework to build and install the HEST 
>> ACPI table
>> dynamically.
>>
>> The following figure illustrates the possible usage of the dyanamic
>> generation of HEST ACPI table.
>>
>>                                      NS | S
>> +--------------------------------------+--------------------------------------+ 
>>
>> | |                                      |
>> |+-------------------------------------+---------------------+ |
>> || +---------------------+--------------------+|                |
>> ||               |                     | ||                |
>> || +-----------+ |+------------------+ | +-----------------+|| 
>> +-------------+|
>> || |HestTable  | ||  HestErrorSource | | | HestErrorSource ||| | 
>> DMC-620     ||
>> || |  DXE      | ||        DXE       | | |  StandaloneMM   ||| 
>> |Standalone MM||
>> || +-----------+ |+------------------+ | +-----------------+|| 
>> +-------------+|
>> ||               |GHESv2               | ||                |
>> || +---------------------+--------------------+|                |
>> ||          +--------------------+     | |                |
>> ||          |PlatformErrorHandler|     | |                |
>> ||          |        DXE         |     | |                |
>> ||          +--------------------+     | |                |
>> ||FF FWK                               | |                |
>> |+-------------------------------------+---------------------+ |
>> | |                                      |
>> +--------------------------------------+--------------------------------------+ 
>>
>>                                         |
>>                     Figure: Firmware First Error Handling approach.
>>
>> All the hardware error sources are added to HEST table as GHESv2[3] 
>> error source
>> descriptors. The framework comprises of following DXE and MM drivers:
>>
>> - HestTableDxe:
>>    Builds HEST table header and allows appending error source 
>> descriptors to the
>>    HEST table. Also provides protocol interface to install the built 
>> HEST table.
>>
>> - HestErrorSourceDxe & HestErrorSourceStandaloneMM:
>>    These two drivers together retrieve all possible error source 
>> descriptors of
>>    type GHESv2 from the MM drivers implementing HEST Error Source 
>> Descriptor
>>    protocol. Once all the descriptors are collected 
>> HestErrorSourceDxe appends
>>    it to HEST table using HestTableDxe driver.
>>    - PlatformErrorHandlerDxe:
>>    Builds and installs SDEI ACPI table. This driver does not 
>> initialize(load)
>>    until HestErrorSourceDxe driver has finished appending all 
>> possible GHESv2
>>    error source descriptors to the HEST table. Once that is complete 
>> using the
>>    HestTableDxe driver it installs the HEST table.
>>
>> This patch series provides reference implementation for DMC-620 
>> Dynamic Memory
>> Controller[4] that has RAS feature enabled. This is platform code
>> implemented as Standalone MM driver in edk2-platforms.
>>
>> References:
>> [1] : ACPI 6.3, Table 18-382, Hardware Error Source Table
>> [2] : SDEI Platform Design Document, revision b, 10 Appendix C, ACPI 
>> table
>>        definitions for SDEI
>> [3] : ACPI Reference Specification 6.3, Table 18-393 GHESv2 Structure
>> [4] : DMC620 Dynamic Memory Controller, revision r1p0
>> [5] : UEFI Reference Specification 2.8, Appendix N - Common Platform 
>> Error
>>        Record
>> [6] : UEFI Reference Specification 2.8, Section N.2.5 Memory Error 
>> Section
>>
>> Link to github branch with the patches in this series -
>> https://github.com/omkkul01/edk2/tree/ras_firmware_first_edk2
>>
>> Omkar Anand Kulkarni (4):
>>    ArmPlatformPkg: Allow dynamic generation of HEST ACPI table
>>    ArmPlatformPkg: add definition for MM_HEST_ERROR_SOURCE_DESC_PROTOCOL
>>    ArmPlatformPkg: retreive error source descriptors from MM
>>    ArmPlatformPkg: Add helpers for HEST table generation
>>
>>   ArmPlatformPkg/ArmPlatformPkg.dec             |  12 +
>>   .../Drivers/Apei/HestDxe/HestDxe.inf          |  49 +++
>>   .../HestMmErrorSources/HestErrorSourceDxe.inf |  44 +++
>>   .../HestErrorSourceStandaloneMm.inf           |  51 +++
>>   .../HestMmErrorSourceCommon.h                 |  37 ++
>>   ArmPlatformPkg/Include/HestAcpiHeader.h       |  49 +++
>>   .../Include/Protocol/HestErrorSourceInfo.h    |  64 ++++
>>   ArmPlatformPkg/Include/Protocol/HestTable.h   |  71 ++++
>>   ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.c | 354 ++++++++++++++++++
>>   .../HestMmErrorSources/HestErrorSourceDxe.c   | 308 +++++++++++++++
>>   .../HestErrorSourceStandaloneMm.c             | 312 +++++++++++++++
>>   11 files changed, 1351 insertions(+)
>>   create mode 100644 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.inf
>>   create mode 100644 
>> ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.inf
>>   create mode 100644 
>> ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandaloneMm.inf
>>   create mode 100644 
>> ArmPlatformPkg/Drivers/HestMmErrorSources/HestMmErrorSourceCommon.h
>>   create mode 100644 ArmPlatformPkg/Include/HestAcpiHeader.h
>>   create mode 100644 
>> ArmPlatformPkg/Include/Protocol/HestErrorSourceInfo.h
>>   create mode 100644 ArmPlatformPkg/Include/Protocol/HestTable.h
>>   create mode 100644 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.c
>>   create mode 100644 
>> ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.c
>>   create mode 100644 
>> ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandaloneMm.c
>>
>



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#78611): https://edk2.groups.io/g/devel/message/78611
Mute This Topic: https://groups.io/mt/84115237/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [edk2-devel] [PATCH v2 0/4] ArmPlatformPkg: Add support to generate HEST ACPI table

Posted by Omkar Anand Kulkarni 2 years, 7 months ago

Hi Sami,

Thanks for reviewing this patch series. Please find my response inline.

Regards,
Omkar

> Hi Omkar,
> 
> How did you check that the HEST table is populated correctly?
> 
> There is no HEST parser in Acpiview at the moment. Do you plan to add an
> HEST parser to Acpiview?
> 
> Regards,
> 
> Sami Mujawar
> 

Yes, we will follow up on the HEST parser patch and post it soon.

- Omkar

> 
> On 02/08/2021 01:49 PM, Sami Mujawar wrote:
> > Hi Omkar,
> >
> > Thank you for this patch series and for the clear explaination below.
> >
> > The explaination below is very useful for anyone who is trying to
> > understand the code.
> >
> > Since the cover letter will not be part of the patch commit messages,
> > would it be possible to include this explanation:
> >
> > 1.  as part of a commit message for one of the patches in this series
> > (patch 2/4 or 3/4).
> >
> > Or
> >
> > 2. in a Readme.md file
> >
> > Regards,
> >
> > Sami Mujawar
> >

Ack.

- Omkar

> >
> > On 10/07/2021 05:18 PM, Omkar Anand Kulkarni wrote:
> >> Changes since v1:
> >> - Helper added for HEST ACPI table generation.
> >> - Rebased to the latest upstream code.
> >>
> >> Hardware Error Source Table (HEST)[1] and Software Delegated
> >> Exception Interface (SDEI)[2] ACPI tables are used to acomplish
> >> firmware first error handling.This patch series introduces a
> >> framework to build and install the HEST ACPI table dynamically.
> >>
> >> The following figure illustrates the possible usage of the dyanamic
> >> generation of HEST ACPI table.
> >>
> >>                                      NS | S
> >> +--------------------------------------+--------------------------------------+
> >>
> >> | |                                      |
> >> |+-------------------------------------+---------------------+ |
> >> || +---------------------+--------------------+|                |
> >> ||               |                     | ||                |
> >> || +-----------+ |+------------------+ | +-----------------+||
> >> +-------------+|
> >> || |HestTable  | ||  HestErrorSource | | | HestErrorSource ||| |
> >> DMC-620     ||
> >> || |  DXE      | ||        DXE       | | |  StandaloneMM   |||
> >> |Standalone MM||
> >> || +-----------+ |+------------------+ | +-----------------+||
> >> +-------------+|
> >> ||               |GHESv2               | ||                |
> >> || +---------------------+--------------------+|                |
> >> ||          +--------------------+     | |                |
> >> ||          |PlatformErrorHandler|     | |                |
> >> ||          |        DXE         |     | |                |
> >> ||          +--------------------+     | |                |
> >> ||FF FWK                               | |                |
> >> |+-------------------------------------+---------------------+ |
> >> | |                                      |
> >> +--------------------------------------+--------------------------------------+
> >>
> >>                                         |
> >>                     Figure: Firmware First Error Handling approach.
> >>
> >> All the hardware error sources are added to HEST table as GHESv2[3]
> >> error source descriptors. The framework comprises of following DXE
> >> and MM drivers:
> >>
> >> - HestTableDxe:
> >>    Builds HEST table header and allows appending error source
> >> descriptors to the
> >>    HEST table. Also provides protocol interface to install the built
> >> HEST table.
> >>
> >> - HestErrorSourceDxe & HestErrorSourceStandaloneMM:
> >>    These two drivers together retrieve all possible error source
> >> descriptors of
> >>    type GHESv2 from the MM drivers implementing HEST Error Source
> >> Descriptor
> >>    protocol. Once all the descriptors are collected
> >> HestErrorSourceDxe appends
> >>    it to HEST table using HestTableDxe driver.
> >>    - PlatformErrorHandlerDxe:
> >>    Builds and installs SDEI ACPI table. This driver does not
> >> initialize(load)
> >>    until HestErrorSourceDxe driver has finished appending all
> >> possible GHESv2
> >>    error source descriptors to the HEST table. Once that is complete
> >> using the
> >>    HestTableDxe driver it installs the HEST table.
> >>
> >> This patch series provides reference implementation for DMC-620
> >> Dynamic Memory Controller[4] that has RAS feature enabled. This is
> >> platform code implemented as Standalone MM driver in edk2-platforms.
> >>
> >> References:
> >> [1] : ACPI 6.3, Table 18-382, Hardware Error Source Table [2] : SDEI
> >> Platform Design Document, revision b, 10 Appendix C, ACPI table
> >>        definitions for SDEI
> >> [3] : ACPI Reference Specification 6.3, Table 18-393 GHESv2 Structure
> >> [4] : DMC620 Dynamic Memory Controller, revision r1p0 [5] : UEFI
> >> Reference Specification 2.8, Appendix N - Common Platform Error
> >>        Record
> >> [6] : UEFI Reference Specification 2.8, Section N.2.5 Memory Error
> >> Section
> >>
> >> Link to github branch with the patches in this series -
> >> https://github.com/omkkul01/edk2/tree/ras_firmware_first_edk2
> >>
> >> Omkar Anand Kulkarni (4):
> >>    ArmPlatformPkg: Allow dynamic generation of HEST ACPI table
> >>    ArmPlatformPkg: add definition for
> MM_HEST_ERROR_SOURCE_DESC_PROTOCOL
> >>    ArmPlatformPkg: retreive error source descriptors from MM
> >>    ArmPlatformPkg: Add helpers for HEST table generation
> >>
> >>   ArmPlatformPkg/ArmPlatformPkg.dec             |  12 +
> >>   .../Drivers/Apei/HestDxe/HestDxe.inf          |  49 +++
> >>   .../HestMmErrorSources/HestErrorSourceDxe.inf |  44 +++
> >>   .../HestErrorSourceStandaloneMm.inf           |  51 +++
> >>   .../HestMmErrorSourceCommon.h                 |  37 ++
> >>   ArmPlatformPkg/Include/HestAcpiHeader.h       |  49 +++
> >>   .../Include/Protocol/HestErrorSourceInfo.h    |  64 ++++
> >>   ArmPlatformPkg/Include/Protocol/HestTable.h   |  71 ++++
> >>   ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.c | 354
> ++++++++++++++++++
> >>   .../HestMmErrorSources/HestErrorSourceDxe.c   | 308 +++++++++++++++
> >>   .../HestErrorSourceStandaloneMm.c             | 312 +++++++++++++++
> >>   11 files changed, 1351 insertions(+)
> >>   create mode 100644 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.inf
> >>   create mode 100644
> >> ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.inf
> >>   create mode 100644
> >>
> ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandalone
> Mm.inf
> >>   create mode 100644
> >>
> ArmPlatformPkg/Drivers/HestMmErrorSources/HestMmErrorSourceCommo
> n.h
> >>   create mode 100644 ArmPlatformPkg/Include/HestAcpiHeader.h
> >>   create mode 100644
> >> ArmPlatformPkg/Include/Protocol/HestErrorSourceInfo.h
> >>   create mode 100644 ArmPlatformPkg/Include/Protocol/HestTable.h
> >>   create mode 100644 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.c
> >>   create mode 100644
> >> ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.c
> >>   create mode 100644
> >>
> ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandalone
> Mm
> >> .c
> >>
> >



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#79736): https://edk2.groups.io/g/devel/message/79736
Mute This Topic: https://groups.io/mt/84115237/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-