From: Pierre Gondois <Pierre.Gondois@arm.com>

_PRT entries can describe interrupt mapping for Pci devices. The
object is described in ACPI 6.4 s6.2.13 "_PRT (PCI Routing Table)".

Add AmlCodeGenPrtEntry() helper function to add _PRT entries
to an existing _PRT object.

Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
---
 .../Include/Library/AmlLib/AmlLib.h           |  52 +++++
 .../Common/AmlLib/CodeGen/AmlCodeGen.c        | 210 ++++++++++++++++++
 2 files changed, 262 insertions(+)

diff --git a/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h b/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h
index 544bc670c455..4a10da8cd7bb 100644
--- a/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h
+++ b/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h
@@ -908,6 +908,58 @@ AmlCodeGenNameResourceTemplate (
   OUT       AML_OBJECT_NODE_HANDLE  * NewObjectNode   OPTIONAL
   );
 
+/** Add a _PRT entry.
+
+  AmlCodeGenPrtEntry (0x0FFFF, 0, "LNKA", 0, PrtNameNode) is
+  equivalent of the following ASL code:
+    Package (4) {
+      0x0FFFF, // Address: Device address (([Device Id] << 16) | 0xFFFF).
+      0,       // Pin: PCI pin number of the device (0-INTA, ...).
+      LNKA     // Source: Name of the device that allocates the interrupt
+               // to which the above pin is connected.
+      0        // Source Index: Source is assumed to only describe one
+               // interrupt, so let it to index 0.
+    }
+
+  The package is added at the tail of the list of the input _PRT node
+  name:
+    Name (_PRT, Package () {
+      [Pre-existing _PRT entries],
+      [Newly created _PRT entry]
+    })
+
+  Cf. ACPI 6.4, s6.2.13 "_PRT (PCI Routing Table)"
+
+  @ingroup CodeGenApis
+
+  @param [in]  Address        Address. Cf ACPI 6.4 specification, Table 6.2:
+                              "ADR Object Address Encodings":
+                              High word-Device #, Low word-Function #. (for
+                              example, device 3, function 2 is 0x00030002).
+                              To refer to all the functions on a device #,
+                              use a function number of FFFF).
+  @param [in]  Pin            PCI pin number of the device (0-INTA ... 3-INTD).
+                              Must be between 0-3.
+  @param [in]  LinkName       Link Name, i.e. device in the AML NameSpace
+                              describing the interrupt used.
+                              The input string is copied.
+  @param [in]  SourceIndex    Source index or GSIV.
+  @param [in]  PrtNameNode    Prt Named node to add the object to ....
+
+  @retval EFI_SUCCESS             Success.
+  @retval EFI_INVALID_PARAMETER   Invalid parameter.
+  @retval EFI_OUT_OF_RESOURCES    Failed to allocate memory.
+**/
+EFI_STATUS
+EFIAPI
+AmlAddPrtEntry (
+  IN        UINT32                    Address,
+  IN        UINT8                     Pin,
+  IN  CONST CHAR8                   * LinkName,
+  IN        UINT32                    SourceIndex,
+  IN        AML_OBJECT_NODE_HANDLE    PrtNameNode
+  );
+
 /** AML code generation for a Device object node.
 
   AmlCodeGenDevice ("COM0", ParentNode, NewObjectNode) is
diff --git a/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlCodeGen.c b/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlCodeGen.c
index eaa49a5834c2..9bf4e110d05c 100644
--- a/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlCodeGen.c
+++ b/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlCodeGen.c
@@ -857,6 +857,216 @@ AmlCodeGenNameResourceTemplate (
   return Status;
 }
 
+/** Add a _PRT entry.
+
+  AmlCodeGenPrtEntry (0x0FFFF, 0, "LNKA", 0, PrtNameNode) is
+  equivalent of the following ASL code:
+    Package (4) {
+      0x0FFFF, // Address: Device address (([Device Id] << 16) | 0xFFFF).
+      0,       // Pin: PCI pin number of the device (0-INTA, ...).
+      LNKA     // Source: Name of the device that allocates the interrupt
+               // to which the above pin is connected.
+      0        // Source Index: Source is assumed to only describe one
+               // interrupt, so let it to index 0.
+    }
+
+  The package is added at the tail of the list of the input _PRT node
+  name:
+    Name (_PRT, Package () {
+      [Pre-existing _PRT entries],
+      [Newly created _PRT entry]
+    })
+
+  Cf. ACPI 6.4 specification:
+   - s6.2.13 "_PRT (PCI Routing Table)"
+   - s6.1.1 "_ADR (Address)"
+
+  @param [in]  Address        Address. Cf ACPI 6.4 specification, Table 6.2:
+                              "ADR Object Address Encodings":
+                              High word-Device #, Low word-Function #. (for
+                              example, device 3, function 2 is 0x00030002).
+                              To refer to all the functions on a device #,
+                              use a function number of FFFF).
+  @param [in]  Pin            PCI pin number of the device (0-INTA ... 3-INTD).
+                              Must be between 0-3.
+  @param [in]  LinkName       Link Name, i.e. device in the AML NameSpace
+                              describing the interrupt used.
+                              The input string is copied.
+  @param [in]  SourceIndex    Source index or GSIV.
+  @param [in]  PrtNameNode    Prt Named node to add the object to ....
+
+  @retval EFI_SUCCESS             Success.
+  @retval EFI_INVALID_PARAMETER   Invalid parameter.
+  @retval EFI_OUT_OF_RESOURCES    Failed to allocate memory.
+**/
+EFI_STATUS
+EFIAPI
+AmlAddPrtEntry (
+  IN        UINT32                    Address,
+  IN        UINT8                     Pin,
+  IN  CONST CHAR8                   * LinkName,
+  IN        UINT32                    SourceIndex,
+  IN        AML_OBJECT_NODE_HANDLE    PrtNameNode
+  )
+{
+  EFI_STATUS          Status;
+  AML_OBJECT_NODE   * PrtEntryList;
+  AML_OBJECT_NODE   * PackageNode;
+  AML_OBJECT_NODE   * NewElementNode;
+
+  CHAR8             * AmlNameString;
+  UINT32              AmlNameStringSize;
+  AML_DATA_NODE     * DataNode;
+
+  if ((Pin > 3)                 ||
+      (LinkName == NULL)        ||
+      (PrtNameNode == NULL)     ||
+      (AmlGetNodeType ((AML_NODE_HANDLE)PrtNameNode) != EAmlNodeObject) ||
+      (!AmlNodeHasOpCode (PrtNameNode, AML_NAME_OP, 0))                 ||
+      !AmlNameOpCompareName (PrtNameNode, "_PRT")) {
+    ASSERT (0);
+    return EFI_INVALID_PARAMETER;
+  }
+
+  NewElementNode = NULL;
+  AmlNameString = NULL;
+  DataNode = NULL;
+
+  // Get the Package object node of the _PRT node,
+  // which is the 2nd fixed argument (i.e. index 1).
+  PrtEntryList = (AML_OBJECT_NODE_HANDLE)AmlGetFixedArgument (
+                                           PrtNameNode,
+                                           EAmlParseIndexTerm1
+                                           );
+  if ((PrtEntryList == NULL)                                              ||
+      (AmlGetNodeType ((AML_NODE_HANDLE)PrtEntryList) != EAmlNodeObject)  ||
+      (!AmlNodeHasOpCode (PrtEntryList, AML_PACKAGE_OP, 0))) {
+    ASSERT (0);
+    return EFI_INVALID_PARAMETER;
+  }
+
+  // The new _PRT entry.
+  Status = AmlCodeGenPackage (&PackageNode);
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    return Status;
+  }
+
+  Status = AmlCodeGenInteger (Address, &NewElementNode);
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  Status = AmlVarListAddTail (
+             (AML_NODE_HANDLE)PackageNode,
+             (AML_NODE_HANDLE)NewElementNode
+             );
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  NewElementNode = NULL;
+
+  Status = AmlCodeGenInteger (Pin, &NewElementNode);
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  Status = AmlVarListAddTail (
+             (AML_NODE_HANDLE)PackageNode,
+             (AML_NODE_HANDLE)NewElementNode
+             );
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  NewElementNode = NULL;
+
+  Status = ConvertAslNameToAmlName (LinkName, &AmlNameString);
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  Status = AmlGetNameStringSize (AmlNameString, &AmlNameStringSize);
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  Status = AmlCreateDataNode (
+             EAmlNodeDataTypeNameString,
+             (UINT8*)AmlNameString,
+             AmlNameStringSize,
+             &DataNode
+             );
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  // AmlNameString will be freed before returning.
+
+  Status = AmlVarListAddTail (
+             (AML_NODE_HANDLE)PackageNode,
+             (AML_NODE_HANDLE)DataNode
+             );
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  DataNode = NULL;
+
+  Status = AmlCodeGenInteger (SourceIndex, &NewElementNode);
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  Status = AmlVarListAddTail (
+             (AML_NODE_HANDLE)PackageNode,
+             (AML_NODE_HANDLE)NewElementNode
+             );
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  // Append to the the list of _PRT entries.
+  Status = AmlVarListAddTail (
+             (AML_NODE_HANDLE)PrtEntryList,
+             (AML_NODE_HANDLE)PackageNode
+             );
+  if (EFI_ERROR (Status)) {
+    ASSERT (0);
+    goto error_handler;
+  }
+
+  // Free AmlNameString before returning as it is copied
+  // in the call to AmlCreateDataNode().
+  goto exit_handler;
+
+error_handler:
+  AmlDeleteTree ((AML_NODE_HANDLE)PackageNode);
+  if (NewElementNode != NULL) {
+    AmlDeleteTree ((AML_NODE_HANDLE)NewElementNode);
+  }
+  if (DataNode != NULL) {
+    AmlDeleteTree ((AML_NODE_HANDLE)DataNode);
+  }
+
+exit_handler:
+  if (AmlNameString != NULL) {
+    FreePool (AmlNameString);
+  }
+  return Status;
+}
+
 /** AML code generation for a Device object node.
 
   AmlCodeGenDevice ("COM0", ParentNode, NewObjectNode) is
-- 
2.17.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#76962): https://edk2.groups.io/g/devel/message/76962
Mute This Topic: https://groups.io/mt/83735875/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-

Hi Pierre,

Thank you for this patch.

Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>

Regards,

Sami Mujawar


On 23/06/2021 12:58 PM, Pierre.Gondois@arm.com wrote:
> From: Pierre Gondois <Pierre.Gondois@arm.com>
>
> _PRT entries can describe interrupt mapping for Pci devices. The
> object is described in ACPI 6.4 s6.2.13 "_PRT (PCI Routing Table)".
>
> Add AmlCodeGenPrtEntry() helper function to add _PRT entries
> to an existing _PRT object.
>
> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
> ---
>   .../Include/Library/AmlLib/AmlLib.h           |  52 +++++
>   .../Common/AmlLib/CodeGen/AmlCodeGen.c        | 210 ++++++++++++++++++
>   2 files changed, 262 insertions(+)
>
> diff --git a/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h b/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h
> index 544bc670c455..4a10da8cd7bb 100644
> --- a/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h
> +++ b/DynamicTablesPkg/Include/Library/AmlLib/AmlLib.h
> @@ -908,6 +908,58 @@ AmlCodeGenNameResourceTemplate (
>     OUT       AML_OBJECT_NODE_HANDLE  * NewObjectNode   OPTIONAL
>     );
>   
> +/** Add a _PRT entry.
> +
> +  AmlCodeGenPrtEntry (0x0FFFF, 0, "LNKA", 0, PrtNameNode) is
> +  equivalent of the following ASL code:
> +    Package (4) {
> +      0x0FFFF, // Address: Device address (([Device Id] << 16) | 0xFFFF).
> +      0,       // Pin: PCI pin number of the device (0-INTA, ...).
> +      LNKA     // Source: Name of the device that allocates the interrupt
> +               // to which the above pin is connected.
> +      0        // Source Index: Source is assumed to only describe one
> +               // interrupt, so let it to index 0.
> +    }
> +
> +  The package is added at the tail of the list of the input _PRT node
> +  name:
> +    Name (_PRT, Package () {
> +      [Pre-existing _PRT entries],
> +      [Newly created _PRT entry]
> +    })
> +
> +  Cf. ACPI 6.4, s6.2.13 "_PRT (PCI Routing Table)"
> +
> +  @ingroup CodeGenApis
> +
> +  @param [in]  Address        Address. Cf ACPI 6.4 specification, Table 6.2:
> +                              "ADR Object Address Encodings":
> +                              High word-Device #, Low word-Function #. (for
> +                              example, device 3, function 2 is 0x00030002).
> +                              To refer to all the functions on a device #,
> +                              use a function number of FFFF).
> +  @param [in]  Pin            PCI pin number of the device (0-INTA ... 3-INTD).
> +                              Must be between 0-3.
> +  @param [in]  LinkName       Link Name, i.e. device in the AML NameSpace
> +                              describing the interrupt used.
> +                              The input string is copied.
> +  @param [in]  SourceIndex    Source index or GSIV.
> +  @param [in]  PrtNameNode    Prt Named node to add the object to ....
> +
> +  @retval EFI_SUCCESS             Success.
> +  @retval EFI_INVALID_PARAMETER   Invalid parameter.
> +  @retval EFI_OUT_OF_RESOURCES    Failed to allocate memory.
> +**/
> +EFI_STATUS
> +EFIAPI
> +AmlAddPrtEntry (
> +  IN        UINT32                    Address,
> +  IN        UINT8                     Pin,
> +  IN  CONST CHAR8                   * LinkName,
> +  IN        UINT32                    SourceIndex,
> +  IN        AML_OBJECT_NODE_HANDLE    PrtNameNode
> +  );
> +
>   /** AML code generation for a Device object node.
>   
>     AmlCodeGenDevice ("COM0", ParentNode, NewObjectNode) is
> diff --git a/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlCodeGen.c b/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlCodeGen.c
> index eaa49a5834c2..9bf4e110d05c 100644
> --- a/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlCodeGen.c
> +++ b/DynamicTablesPkg/Library/Common/AmlLib/CodeGen/AmlCodeGen.c
> @@ -857,6 +857,216 @@ AmlCodeGenNameResourceTemplate (
>     return Status;
>   }
>   
> +/** Add a _PRT entry.
> +
> +  AmlCodeGenPrtEntry (0x0FFFF, 0, "LNKA", 0, PrtNameNode) is
> +  equivalent of the following ASL code:
> +    Package (4) {
> +      0x0FFFF, // Address: Device address (([Device Id] << 16) | 0xFFFF).
> +      0,       // Pin: PCI pin number of the device (0-INTA, ...).
> +      LNKA     // Source: Name of the device that allocates the interrupt
> +               // to which the above pin is connected.
> +      0        // Source Index: Source is assumed to only describe one
> +               // interrupt, so let it to index 0.
> +    }
> +
> +  The package is added at the tail of the list of the input _PRT node
> +  name:
> +    Name (_PRT, Package () {
> +      [Pre-existing _PRT entries],
> +      [Newly created _PRT entry]
> +    })
> +
> +  Cf. ACPI 6.4 specification:
> +   - s6.2.13 "_PRT (PCI Routing Table)"
> +   - s6.1.1 "_ADR (Address)"
> +
> +  @param [in]  Address        Address. Cf ACPI 6.4 specification, Table 6.2:
> +                              "ADR Object Address Encodings":
> +                              High word-Device #, Low word-Function #. (for
> +                              example, device 3, function 2 is 0x00030002).
> +                              To refer to all the functions on a device #,
> +                              use a function number of FFFF).
> +  @param [in]  Pin            PCI pin number of the device (0-INTA ... 3-INTD).
> +                              Must be between 0-3.
> +  @param [in]  LinkName       Link Name, i.e. device in the AML NameSpace
> +                              describing the interrupt used.
> +                              The input string is copied.
> +  @param [in]  SourceIndex    Source index or GSIV.
> +  @param [in]  PrtNameNode    Prt Named node to add the object to ....
> +
> +  @retval EFI_SUCCESS             Success.
> +  @retval EFI_INVALID_PARAMETER   Invalid parameter.
> +  @retval EFI_OUT_OF_RESOURCES    Failed to allocate memory.
> +**/
> +EFI_STATUS
> +EFIAPI
> +AmlAddPrtEntry (
> +  IN        UINT32                    Address,
> +  IN        UINT8                     Pin,
> +  IN  CONST CHAR8                   * LinkName,
> +  IN        UINT32                    SourceIndex,
> +  IN        AML_OBJECT_NODE_HANDLE    PrtNameNode
> +  )
> +{
> +  EFI_STATUS          Status;
> +  AML_OBJECT_NODE   * PrtEntryList;
> +  AML_OBJECT_NODE   * PackageNode;
> +  AML_OBJECT_NODE   * NewElementNode;
> +
> +  CHAR8             * AmlNameString;
> +  UINT32              AmlNameStringSize;
> +  AML_DATA_NODE     * DataNode;
> +
> +  if ((Pin > 3)                 ||
> +      (LinkName == NULL)        ||
> +      (PrtNameNode == NULL)     ||
> +      (AmlGetNodeType ((AML_NODE_HANDLE)PrtNameNode) != EAmlNodeObject) ||
> +      (!AmlNodeHasOpCode (PrtNameNode, AML_NAME_OP, 0))                 ||
> +      !AmlNameOpCompareName (PrtNameNode, "_PRT")) {
> +    ASSERT (0);
> +    return EFI_INVALID_PARAMETER;
> +  }
> +
> +  NewElementNode = NULL;
> +  AmlNameString = NULL;
> +  DataNode = NULL;
> +
> +  // Get the Package object node of the _PRT node,
> +  // which is the 2nd fixed argument (i.e. index 1).
> +  PrtEntryList = (AML_OBJECT_NODE_HANDLE)AmlGetFixedArgument (
> +                                           PrtNameNode,
> +                                           EAmlParseIndexTerm1
> +                                           );
> +  if ((PrtEntryList == NULL)                                              ||
> +      (AmlGetNodeType ((AML_NODE_HANDLE)PrtEntryList) != EAmlNodeObject)  ||
> +      (!AmlNodeHasOpCode (PrtEntryList, AML_PACKAGE_OP, 0))) {
> +    ASSERT (0);
> +    return EFI_INVALID_PARAMETER;
> +  }
> +
> +  // The new _PRT entry.
> +  Status = AmlCodeGenPackage (&PackageNode);
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    return Status;
> +  }
> +
> +  Status = AmlCodeGenInteger (Address, &NewElementNode);
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  Status = AmlVarListAddTail (
> +             (AML_NODE_HANDLE)PackageNode,
> +             (AML_NODE_HANDLE)NewElementNode
> +             );
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  NewElementNode = NULL;
> +
> +  Status = AmlCodeGenInteger (Pin, &NewElementNode);
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  Status = AmlVarListAddTail (
> +             (AML_NODE_HANDLE)PackageNode,
> +             (AML_NODE_HANDLE)NewElementNode
> +             );
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  NewElementNode = NULL;
> +
> +  Status = ConvertAslNameToAmlName (LinkName, &AmlNameString);
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  Status = AmlGetNameStringSize (AmlNameString, &AmlNameStringSize);
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  Status = AmlCreateDataNode (
> +             EAmlNodeDataTypeNameString,
> +             (UINT8*)AmlNameString,
> +             AmlNameStringSize,
> +             &DataNode
> +             );
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  // AmlNameString will be freed before returning.
> +
> +  Status = AmlVarListAddTail (
> +             (AML_NODE_HANDLE)PackageNode,
> +             (AML_NODE_HANDLE)DataNode
> +             );
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  DataNode = NULL;
> +
> +  Status = AmlCodeGenInteger (SourceIndex, &NewElementNode);
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  Status = AmlVarListAddTail (
> +             (AML_NODE_HANDLE)PackageNode,
> +             (AML_NODE_HANDLE)NewElementNode
> +             );
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  // Append to the the list of _PRT entries.
> +  Status = AmlVarListAddTail (
> +             (AML_NODE_HANDLE)PrtEntryList,
> +             (AML_NODE_HANDLE)PackageNode
> +             );
> +  if (EFI_ERROR (Status)) {
> +    ASSERT (0);
> +    goto error_handler;
> +  }
> +
> +  // Free AmlNameString before returning as it is copied
> +  // in the call to AmlCreateDataNode().
> +  goto exit_handler;
> +
> +error_handler:
> +  AmlDeleteTree ((AML_NODE_HANDLE)PackageNode);
> +  if (NewElementNode != NULL) {
> +    AmlDeleteTree ((AML_NODE_HANDLE)NewElementNode);
> +  }
> +  if (DataNode != NULL) {
> +    AmlDeleteTree ((AML_NODE_HANDLE)DataNode);
> +  }
> +
> +exit_handler:
> +  if (AmlNameString != NULL) {
> +    FreePool (AmlNameString);
> +  }
> +  return Status;
> +}
> +
>   /** AML code generation for a Device object node.
>   
>     AmlCodeGenDevice ("COM0", ParentNode, NewObjectNode) is



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#81559): https://edk2.groups.io/g/devel/message/81559
Mute This Topic: https://groups.io/mt/83735875/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-