Silicon/Marvell/Armada7k8k/AcpiTables/Armada70x0Db/Dsdt.asl | 24 +++++++++ Silicon/Marvell/Armada7k8k/AcpiTables/Armada80x0Db/Dsdt.asl | 38 ++++++++++++++ Silicon/Marvell/Armada7k8k/AcpiTables/Armada80x0McBin/Dsdt.asl | 53 ++++++++++++++++++++ Silicon/Marvell/OcteonTx/AcpiTables/T91/Cn9131DbA/Ssdt.asl | 1 + Silicon/Marvell/OcteonTx/AcpiTables/T91/Cn913xDbA/Dsdt.asl | 24 +++++++++ 5 files changed, 140 insertions(+)
Hi, The MDIO ACPI binding has been established and merged to the Linux tree, hence it is now possible to update the ACPI description of the platforms that base on the Marvell SoCs. For convenience, the code is exposed in the public github branch: https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613 There is also MacchiatoBin firmware binary avaialable for testing: https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0 I'm looking forward to the comments or remarks. Best regards, Marcin Marcin Wojtas (4): SolidRun/Armada80x0McBin: Add ACPI MDIO description Marvell/Cn913xDb: Add ACPI MDIO description Marvell/Armada70x0Db: Add ACPI MDIO description Marvell/Armada80x0Db: Add ACPI MDIO description Silicon/Marvell/Armada7k8k/AcpiTables/Armada70x0Db/Dsdt.asl | 24 +++++++++ Silicon/Marvell/Armada7k8k/AcpiTables/Armada80x0Db/Dsdt.asl | 38 ++++++++++++++ Silicon/Marvell/Armada7k8k/AcpiTables/Armada80x0McBin/Dsdt.asl | 53 ++++++++++++++++++++ Silicon/Marvell/OcteonTx/AcpiTables/T91/Cn9131DbA/Ssdt.asl | 1 + Silicon/Marvell/OcteonTx/AcpiTables/T91/Cn913xDbA/Dsdt.asl | 24 +++++++++ 5 files changed, 140 insertions(+) -- 2.29.0 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#76446): https://edk2.groups.io/g/devel/message/76446 Mute This Topic: https://groups.io/mt/83513508/1787277 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org] -=-=-=-=-=-=-=-=-=-=-=-
Hi Marcin, On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote: > Hi, > > The MDIO ACPI binding has been established and merged to the > Linux tree, Congratulations! :) Is FreeBSD expected to follow suit? > hence it is now possible to update the ACPI > description of the platforms that base on the Marvell SoCs. > > For convenience, the code is exposed in the public github branch: > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613 > There is also MacchiatoBin firmware binary avaialable for testing: > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0 > > I'm looking forward to the comments or remarks. The patches themselves look straightforward enough. I *would* prefer some tested-by, for these sources rather than the binary, before merging though. Best Regards, Leif > Best regards, > Marcin > > Marcin Wojtas (4): > SolidRun/Armada80x0McBin: Add ACPI MDIO description > Marvell/Cn913xDb: Add ACPI MDIO description > Marvell/Armada70x0Db: Add ACPI MDIO description > Marvell/Armada80x0Db: Add ACPI MDIO description > > Silicon/Marvell/Armada7k8k/AcpiTables/Armada70x0Db/Dsdt.asl | 24 +++++++++ > Silicon/Marvell/Armada7k8k/AcpiTables/Armada80x0Db/Dsdt.asl | 38 ++++++++++++++ > Silicon/Marvell/Armada7k8k/AcpiTables/Armada80x0McBin/Dsdt.asl | 53 ++++++++++++++++++++ > Silicon/Marvell/OcteonTx/AcpiTables/T91/Cn9131DbA/Ssdt.asl | 1 + > Silicon/Marvell/OcteonTx/AcpiTables/T91/Cn913xDbA/Dsdt.asl | 24 +++++++++ > 5 files changed, 140 insertions(+) > > -- > 2.29.0 > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#76490): https://edk2.groups.io/g/devel/message/76490 Mute This Topic: https://groups.io/mt/83513508/1787277 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org] -=-=-=-=-=-=-=-=-=-=-=-
On Mon, Jun 14, 2021 at 11:55 PM Leif Lindholm <leif@nuviainc.com> wrote: > > Hi Marcin, > > On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote: > > Hi, > > > > The MDIO ACPI binding has been established and merged to the > > Linux tree, > > Congratulations! :) > > Is FreeBSD expected to follow suit? > > > hence it is now possible to update the ACPI > > description of the platforms that base on the Marvell SoCs. > > > > For convenience, the code is exposed in the public github branch: > > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613 > > There is also MacchiatoBin firmware binary avaialable for testing: > > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0 > > > > I'm looking forward to the comments or remarks. > > The patches themselves look straightforward enough. > I *would* prefer some tested-by, for these sources rather than the > binary, before merging though. I will get the ACPI changes from Marcin and put a Tested-By on from SolidRun's side. Jon > > Best Regards, > > Leif > > > Best regards, > > Marcin > > > > Marcin Wojtas (4): > > SolidRun/Armada80x0McBin: Add ACPI MDIO description > > Marvell/Cn913xDb: Add ACPI MDIO description > > Marvell/Armada70x0Db: Add ACPI MDIO description > > Marvell/Armada80x0Db: Add ACPI MDIO description > > > > Silicon/Marvell/Armada7k8k/AcpiTables/Armada70x0Db/Dsdt.asl | 24 +++++++++ > > Silicon/Marvell/Armada7k8k/AcpiTables/Armada80x0Db/Dsdt.asl | 38 ++++++++++++++ > > Silicon/Marvell/Armada7k8k/AcpiTables/Armada80x0McBin/Dsdt.asl | 53 ++++++++++++++++++++ > > Silicon/Marvell/OcteonTx/AcpiTables/T91/Cn9131DbA/Ssdt.asl | 1 + > > Silicon/Marvell/OcteonTx/AcpiTables/T91/Cn913xDbA/Dsdt.asl | 24 +++++++++ > > 5 files changed, 140 insertions(+) > > > > -- > > 2.29.0 > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#76498): https://edk2.groups.io/g/devel/message/76498 Mute This Topic: https://groups.io/mt/83513508/1787277 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org] -=-=-=-=-=-=-=-=-=-=-=-
Hi Leif, pon., 14 cze 2021 o 23:55 Leif Lindholm <leif@nuviainc.com> napisał(a): > > Hi Marcin, > > On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote: > > Hi, > > > > The MDIO ACPI binding has been established and merged to the > > Linux tree, > > Congratulations! :) > > Is FreeBSD expected to follow suit? There's no driver yet, but once it's finally created I will make sure it supports ACPI properly. > > > hence it is now possible to update the ACPI > > description of the platforms that base on the Marvell SoCs. > > > > For convenience, the code is exposed in the public github branch: > > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613 > > There is also MacchiatoBin firmware binary avaialable for testing: > > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0 > > > > I'm looking forward to the comments or remarks. > > The patches themselves look straightforward enough. > I *would* prefer some tested-by, for these sources rather than the > binary, before merging though. > I have some our patches queued, that are blocked by this patchset. In case no time is found for external testers - if this may help to get it pushed through, please see below logs from the next-20210628 tag and unchanged firmware. All network ports of MacchiatoBin and CN913x-DB work properly, with full 1G/10G PHY support via X/MDIO interfaces: MacchiatoBin # uname -a Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 09:14:07 CEST 2021 aarch64 GNU/Linux # dmesg | grep MRVL0101 [ 1.829659] mv88x3340 MRVL0101:00-mii:00: Firmware version 0.3.3.0 [ 1.839622] mv88x3340 MRVL0101:00-mii:08: Firmware version 0.3.3.0 [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver [mv88x3340] (irq=POLL) [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver [mv88x3340] (irq=POLL) # dmesg | grep MRVL0100 [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver [Marvell 88E1510] (irq=POLL) # dmesg | grep mvpp2 [...] [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver [mv88x3340] (irq=POLL) [ 2.756701] mvpp2 MRVL0110:00 eth1: configuring for phy/10gbase-r link mode [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver [mv88x3340] (irq=POLL) [ 2.775834] mvpp2 MRVL0110:01 eth2: configuring for phy/10gbase-r link mode [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver [Marvell 88E1510] (irq=POLL) [ 2.928285] mvpp2 MRVL0110:01 eth3: configuring for phy/sgmii link mode [ 2.936351] mvpp2 MRVL0110:01 eth4: configuring for inband/2500base-x link mode [ 5.987259] mvpp2 MRVL0110:01 eth3: Link is Up - 1Gbps/Full - flow control off # CN913x-DB # uname -a Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 09:14:07 CEST 2021 aarch64 GNU/Linux # dmesg | grep MRVL0100 [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver [Marvell 88E1510] (irq=POLL) [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver [Marvell 88E1510] (irq=POLL) # dmesg | grep mvpp2 [...] [ 2.544917] mvpp2 MRVL0110:00 eth1: configuring for inband/10gbase-r link mode [ 2.552480] mvpp2 MRVL0110:00 eth1: Link is Up - 10Gbps/Full - flow control rx [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver [Marvell 88E1510] (irq=POLL) [ 2.630060] mvpp2 MRVL0110:00 eth2: configuring for phy/rgmii-id link mode [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver [Marvell 88E1510] (irq=POLL) [ 2.750056] mvpp2 MRVL0110:00 eth3: configuring for phy/rgmii-id link mode [ 2.810169] mvpp2 MRVL0110:01 eth4: configuring for inband/10gbase-r link mode [ 2.817471] mvpp2 MRVL0110:01 eth4: Link is Up - 10Gbps/Full - flow control rx [ 5.693231] mvpp2 MRVL0110:00 eth2: Link is Up - 1Gbps/Full - flow control off [ 10.840942] mvpp2 MRVL0110:00 eth1: Link is Down [ 10.864124] mvpp2 MRVL0110:01 eth4: Link is Down # Best regards, Marcin -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#77274): https://edk2.groups.io/g/devel/message/77274 Mute This Topic: https://groups.io/mt/83513508/1787277 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org] -=-=-=-=-=-=-=-=-=-=-=-
Hi, wt., 29 cze 2021 o 16:17 Marcin Wojtas <mw@semihalf.com> napisał(a): > > Hi Leif, > > pon., 14 cze 2021 o 23:55 Leif Lindholm <leif@nuviainc.com> napisał(a): > > > > Hi Marcin, > > > > On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote: > > > Hi, > > > > > > The MDIO ACPI binding has been established and merged to the > > > Linux tree, > > > > Congratulations! :) > > > > Is FreeBSD expected to follow suit? > > There's no driver yet, but once it's finally created I will make sure > it supports ACPI properly. > > > > > > hence it is now possible to update the ACPI > > > description of the platforms that base on the Marvell SoCs. > > > > > > For convenience, the code is exposed in the public github branch: > > > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613 > > > There is also MacchiatoBin firmware binary avaialable for testing: > > > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0 > > > > > > I'm looking forward to the comments or remarks. > > > > The patches themselves look straightforward enough. > > I *would* prefer some tested-by, for these sources rather than the > > binary, before merging though. > > > > I have some our patches queued, that are blocked by this patchset. In > case no time is found for external testers - if this may help to get > it pushed through, please see below logs from the next-20210628 tag > and unchanged firmware. All network ports of MacchiatoBin and > CN913x-DB work properly, with full 1G/10G PHY support via X/MDIO > interfaces: > > MacchiatoBin > # uname -a > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 > 09:14:07 CEST 2021 aarch64 GNU/Linux > # dmesg | grep MRVL0101 > [ 1.829659] mv88x3340 MRVL0101:00-mii:00: Firmware version 0.3.3.0 > [ 1.839622] mv88x3340 MRVL0101:00-mii:08: Firmware version 0.3.3.0 > [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver > [mv88x3340] (irq=POLL) > [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver > [mv88x3340] (irq=POLL) > # dmesg | grep MRVL0100 > [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver > [Marvell 88E1510] (irq=POLL) > # dmesg | grep mvpp2 > [...] > [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver > [mv88x3340] (irq=POLL) > [ 2.756701] mvpp2 MRVL0110:00 eth1: configuring for phy/10gbase-r link mode > [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver > [mv88x3340] (irq=POLL) > [ 2.775834] mvpp2 MRVL0110:01 eth2: configuring for phy/10gbase-r link mode > [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver > [Marvell 88E1510] (irq=POLL) > [ 2.928285] mvpp2 MRVL0110:01 eth3: configuring for phy/sgmii link mode > [ 2.936351] mvpp2 MRVL0110:01 eth4: configuring for > inband/2500base-x link mode > [ 5.987259] mvpp2 MRVL0110:01 eth3: Link is Up - 1Gbps/Full - flow > control off > # > > CN913x-DB > # uname -a > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 > 09:14:07 CEST 2021 aarch64 GNU/Linux > # dmesg | grep MRVL0100 > [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver > [Marvell 88E1510] (irq=POLL) > [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver > [Marvell 88E1510] (irq=POLL) > # dmesg | grep mvpp2 > [...] > [ 2.544917] mvpp2 MRVL0110:00 eth1: configuring for > inband/10gbase-r link mode > [ 2.552480] mvpp2 MRVL0110:00 eth1: Link is Up - 10Gbps/Full - flow > control rx > [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver > [Marvell 88E1510] (irq=POLL) > [ 2.630060] mvpp2 MRVL0110:00 eth2: configuring for phy/rgmii-id link mode > [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver > [Marvell 88E1510] (irq=POLL) > [ 2.750056] mvpp2 MRVL0110:00 eth3: configuring for phy/rgmii-id link mode > [ 2.810169] mvpp2 MRVL0110:01 eth4: configuring for > inband/10gbase-r link mode > [ 2.817471] mvpp2 MRVL0110:01 eth4: Link is Up - 10Gbps/Full - flow > control rx > [ 5.693231] mvpp2 MRVL0110:00 eth2: Link is Up - 1Gbps/Full - flow > control off > [ 10.840942] mvpp2 MRVL0110:00 eth1: Link is Down > [ 10.864124] mvpp2 MRVL0110:01 eth4: Link is Down > # > Both platforms were have been additionally tested by Greg, do you have any comments/objections to merging this patchset? Thanks, Marcin -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#77691): https://edk2.groups.io/g/devel/message/77691 Mute This Topic: https://groups.io/mt/83513508/1787277 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org] -=-=-=-=-=-=-=-=-=-=-=-
On Mon, Jul 12, 2021 at 12:52 PM Marcin Wojtas <mw@semihalf.com> wrote: > > Hi, > > wt., 29 cze 2021 o 16:17 Marcin Wojtas <mw@semihalf.com> napisał(a): > > > > Hi Leif, > > > > pon., 14 cze 2021 o 23:55 Leif Lindholm <leif@nuviainc.com> napisał(a): > > > > > > Hi Marcin, > > > > > > On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote: > > > > Hi, > > > > > > > > The MDIO ACPI binding has been established and merged to the > > > > Linux tree, > > > > > > Congratulations! :) > > > > > > Is FreeBSD expected to follow suit? > > > > There's no driver yet, but once it's finally created I will make sure > > it supports ACPI properly. > > > > > > > > > hence it is now possible to update the ACPI > > > > description of the platforms that base on the Marvell SoCs. > > > > > > > > For convenience, the code is exposed in the public github branch: > > > > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613 > > > > There is also MacchiatoBin firmware binary avaialable for testing: > > > > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0 > > > > > > > > I'm looking forward to the comments or remarks. > > > > > > The patches themselves look straightforward enough. > > > I *would* prefer some tested-by, for these sources rather than the > > > binary, before merging though. > > > > > > > I have some our patches queued, that are blocked by this patchset. In > > case no time is found for external testers - if this may help to get > > it pushed through, please see below logs from the next-20210628 tag > > and unchanged firmware. All network ports of MacchiatoBin and > > CN913x-DB work properly, with full 1G/10G PHY support via X/MDIO > > interfaces: > > > > MacchiatoBin > > # uname -a > > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 > > 09:14:07 CEST 2021 aarch64 GNU/Linux > > # dmesg | grep MRVL0101 > > [ 1.829659] mv88x3340 MRVL0101:00-mii:00: Firmware version 0.3.3.0 > > [ 1.839622] mv88x3340 MRVL0101:00-mii:08: Firmware version 0.3.3.0 > > [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver > > [mv88x3340] (irq=POLL) > > [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver > > [mv88x3340] (irq=POLL) > > # dmesg | grep MRVL0100 > > [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver > > [Marvell 88E1510] (irq=POLL) > > # dmesg | grep mvpp2 > > [...] > > [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver > > [mv88x3340] (irq=POLL) > > [ 2.756701] mvpp2 MRVL0110:00 eth1: configuring for phy/10gbase-r link mode > > [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver > > [mv88x3340] (irq=POLL) > > [ 2.775834] mvpp2 MRVL0110:01 eth2: configuring for phy/10gbase-r link mode > > [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver > > [Marvell 88E1510] (irq=POLL) > > [ 2.928285] mvpp2 MRVL0110:01 eth3: configuring for phy/sgmii link mode > > [ 2.936351] mvpp2 MRVL0110:01 eth4: configuring for > > inband/2500base-x link mode > > [ 5.987259] mvpp2 MRVL0110:01 eth3: Link is Up - 1Gbps/Full - flow > > control off > > # > > > > CN913x-DB > > # uname -a > > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 > > 09:14:07 CEST 2021 aarch64 GNU/Linux > > # dmesg | grep MRVL0100 > > [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver > > [Marvell 88E1510] (irq=POLL) > > [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver > > [Marvell 88E1510] (irq=POLL) > > # dmesg | grep mvpp2 > > [...] > > [ 2.544917] mvpp2 MRVL0110:00 eth1: configuring for > > inband/10gbase-r link mode > > [ 2.552480] mvpp2 MRVL0110:00 eth1: Link is Up - 10Gbps/Full - flow > > control rx > > [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver > > [Marvell 88E1510] (irq=POLL) > > [ 2.630060] mvpp2 MRVL0110:00 eth2: configuring for phy/rgmii-id link mode > > [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver > > [Marvell 88E1510] (irq=POLL) > > [ 2.750056] mvpp2 MRVL0110:00 eth3: configuring for phy/rgmii-id link mode > > [ 2.810169] mvpp2 MRVL0110:01 eth4: configuring for > > inband/10gbase-r link mode > > [ 2.817471] mvpp2 MRVL0110:01 eth4: Link is Up - 10Gbps/Full - flow > > control rx > > [ 5.693231] mvpp2 MRVL0110:00 eth2: Link is Up - 1Gbps/Full - flow > > control off > > [ 10.840942] mvpp2 MRVL0110:00 eth1: Link is Down > > [ 10.864124] mvpp2 MRVL0110:01 eth4: Link is Down > > # > > > > Both platforms were have been additionally tested by Greg, do you have > any comments/objections to merging this patchset? > > Thanks, > Marcin You can add my Tested-by as well. Finally got time over the weekend to verify on all my Marvell platforms this effects. -Jon -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#77692): https://edk2.groups.io/g/devel/message/77692 Mute This Topic: https://groups.io/mt/83513508/1787277 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org] -=-=-=-=-=-=-=-=-=-=-=-
On Mon, 12 Jul 2021 at 13:17, Jon Nettleton <jon@solid-run.com> wrote: > > On Mon, Jul 12, 2021 at 12:52 PM Marcin Wojtas <mw@semihalf.com> wrote: > > > > Hi, > > > > wt., 29 cze 2021 o 16:17 Marcin Wojtas <mw@semihalf.com> napisał(a): > > > > > > Hi Leif, > > > > > > pon., 14 cze 2021 o 23:55 Leif Lindholm <leif@nuviainc.com> napisał(a): > > > > > > > > Hi Marcin, > > > > > > > > On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote: > > > > > Hi, > > > > > > > > > > The MDIO ACPI binding has been established and merged to the > > > > > Linux tree, > > > > > > > > Congratulations! :) > > > > > > > > Is FreeBSD expected to follow suit? > > > > > > There's no driver yet, but once it's finally created I will make sure > > > it supports ACPI properly. > > > > > > > > > > > > hence it is now possible to update the ACPI > > > > > description of the platforms that base on the Marvell SoCs. > > > > > > > > > > For convenience, the code is exposed in the public github branch: > > > > > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613 > > > > > There is also MacchiatoBin firmware binary avaialable for testing: > > > > > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0 > > > > > > > > > > I'm looking forward to the comments or remarks. > > > > > > > > The patches themselves look straightforward enough. > > > > I *would* prefer some tested-by, for these sources rather than the > > > > binary, before merging though. > > > > > > > > > > I have some our patches queued, that are blocked by this patchset. In > > > case no time is found for external testers - if this may help to get > > > it pushed through, please see below logs from the next-20210628 tag > > > and unchanged firmware. All network ports of MacchiatoBin and > > > CN913x-DB work properly, with full 1G/10G PHY support via X/MDIO > > > interfaces: > > > > > > MacchiatoBin > > > # uname -a > > > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 > > > 09:14:07 CEST 2021 aarch64 GNU/Linux > > > # dmesg | grep MRVL0101 > > > [ 1.829659] mv88x3340 MRVL0101:00-mii:00: Firmware version 0.3.3.0 > > > [ 1.839622] mv88x3340 MRVL0101:00-mii:08: Firmware version 0.3.3.0 > > > [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver > > > [mv88x3340] (irq=POLL) > > > [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver > > > [mv88x3340] (irq=POLL) > > > # dmesg | grep MRVL0100 > > > [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver > > > [Marvell 88E1510] (irq=POLL) > > > # dmesg | grep mvpp2 > > > [...] > > > [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver > > > [mv88x3340] (irq=POLL) > > > [ 2.756701] mvpp2 MRVL0110:00 eth1: configuring for phy/10gbase-r link mode > > > [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver > > > [mv88x3340] (irq=POLL) > > > [ 2.775834] mvpp2 MRVL0110:01 eth2: configuring for phy/10gbase-r link mode > > > [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver > > > [Marvell 88E1510] (irq=POLL) > > > [ 2.928285] mvpp2 MRVL0110:01 eth3: configuring for phy/sgmii link mode > > > [ 2.936351] mvpp2 MRVL0110:01 eth4: configuring for > > > inband/2500base-x link mode > > > [ 5.987259] mvpp2 MRVL0110:01 eth3: Link is Up - 1Gbps/Full - flow > > > control off > > > # > > > > > > CN913x-DB > > > # uname -a > > > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 > > > 09:14:07 CEST 2021 aarch64 GNU/Linux > > > # dmesg | grep MRVL0100 > > > [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver > > > [Marvell 88E1510] (irq=POLL) > > > [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver > > > [Marvell 88E1510] (irq=POLL) > > > # dmesg | grep mvpp2 > > > [...] > > > [ 2.544917] mvpp2 MRVL0110:00 eth1: configuring for > > > inband/10gbase-r link mode > > > [ 2.552480] mvpp2 MRVL0110:00 eth1: Link is Up - 10Gbps/Full - flow > > > control rx > > > [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver > > > [Marvell 88E1510] (irq=POLL) > > > [ 2.630060] mvpp2 MRVL0110:00 eth2: configuring for phy/rgmii-id link mode > > > [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver > > > [Marvell 88E1510] (irq=POLL) > > > [ 2.750056] mvpp2 MRVL0110:00 eth3: configuring for phy/rgmii-id link mode > > > [ 2.810169] mvpp2 MRVL0110:01 eth4: configuring for > > > inband/10gbase-r link mode > > > [ 2.817471] mvpp2 MRVL0110:01 eth4: Link is Up - 10Gbps/Full - flow > > > control rx > > > [ 5.693231] mvpp2 MRVL0110:00 eth2: Link is Up - 1Gbps/Full - flow > > > control off > > > [ 10.840942] mvpp2 MRVL0110:00 eth1: Link is Down > > > [ 10.864124] mvpp2 MRVL0110:01 eth4: Link is Down > > > # > > > > > > > Both platforms were have been additionally tested by Greg, do you have > > any comments/objections to merging this patchset? > > > > Thanks, > > Marcin > > You can add my Tested-by as well. Finally got time over the weekend > to verify on all my Marvell platforms this effects. > Thanks all. I will get to this shortly - apologies for the delay. -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#77839): https://edk2.groups.io/g/devel/message/77839 Mute This Topic: https://groups.io/mt/83513508/1787277 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org] -=-=-=-=-=-=-=-=-=-=-=-
On Fri, 16 Jul 2021 at 19:32, Ard Biesheuvel <ardb@kernel.org> wrote: > > On Mon, 12 Jul 2021 at 13:17, Jon Nettleton <jon@solid-run.com> wrote: > > > > On Mon, Jul 12, 2021 at 12:52 PM Marcin Wojtas <mw@semihalf.com> wrote: > > > > > > Hi, > > > > > > wt., 29 cze 2021 o 16:17 Marcin Wojtas <mw@semihalf.com> napisał(a): > > > > > > > > Hi Leif, > > > > > > > > pon., 14 cze 2021 o 23:55 Leif Lindholm <leif@nuviainc.com> napisał(a): > > > > > > > > > > Hi Marcin, > > > > > > > > > > On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote: > > > > > > Hi, > > > > > > > > > > > > The MDIO ACPI binding has been established and merged to the > > > > > > Linux tree, > > > > > > > > > > Congratulations! :) > > > > > > > > > > Is FreeBSD expected to follow suit? > > > > > > > > There's no driver yet, but once it's finally created I will make sure > > > > it supports ACPI properly. > > > > > > > > > > > > > > > hence it is now possible to update the ACPI > > > > > > description of the platforms that base on the Marvell SoCs. > > > > > > > > > > > > For convenience, the code is exposed in the public github branch: > > > > > > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613 > > > > > > There is also MacchiatoBin firmware binary avaialable for testing: > > > > > > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0 > > > > > > > > > > > > I'm looking forward to the comments or remarks. > > > > > > > > > > The patches themselves look straightforward enough. > > > > > I *would* prefer some tested-by, for these sources rather than the > > > > > binary, before merging though. > > > > > > > > > > > > > I have some our patches queued, that are blocked by this patchset. In > > > > case no time is found for external testers - if this may help to get > > > > it pushed through, please see below logs from the next-20210628 tag > > > > and unchanged firmware. All network ports of MacchiatoBin and > > > > CN913x-DB work properly, with full 1G/10G PHY support via X/MDIO > > > > interfaces: > > > > > > > > MacchiatoBin > > > > # uname -a > > > > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 > > > > 09:14:07 CEST 2021 aarch64 GNU/Linux > > > > # dmesg | grep MRVL0101 > > > > [ 1.829659] mv88x3340 MRVL0101:00-mii:00: Firmware version 0.3.3.0 > > > > [ 1.839622] mv88x3340 MRVL0101:00-mii:08: Firmware version 0.3.3.0 > > > > [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver > > > > [mv88x3340] (irq=POLL) > > > > [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver > > > > [mv88x3340] (irq=POLL) > > > > # dmesg | grep MRVL0100 > > > > [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver > > > > [Marvell 88E1510] (irq=POLL) > > > > # dmesg | grep mvpp2 > > > > [...] > > > > [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver > > > > [mv88x3340] (irq=POLL) > > > > [ 2.756701] mvpp2 MRVL0110:00 eth1: configuring for phy/10gbase-r link mode > > > > [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver > > > > [mv88x3340] (irq=POLL) > > > > [ 2.775834] mvpp2 MRVL0110:01 eth2: configuring for phy/10gbase-r link mode > > > > [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver > > > > [Marvell 88E1510] (irq=POLL) > > > > [ 2.928285] mvpp2 MRVL0110:01 eth3: configuring for phy/sgmii link mode > > > > [ 2.936351] mvpp2 MRVL0110:01 eth4: configuring for > > > > inband/2500base-x link mode > > > > [ 5.987259] mvpp2 MRVL0110:01 eth3: Link is Up - 1Gbps/Full - flow > > > > control off > > > > # > > > > > > > > CN913x-DB > > > > # uname -a > > > > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 > > > > 09:14:07 CEST 2021 aarch64 GNU/Linux > > > > # dmesg | grep MRVL0100 > > > > [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver > > > > [Marvell 88E1510] (irq=POLL) > > > > [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver > > > > [Marvell 88E1510] (irq=POLL) > > > > # dmesg | grep mvpp2 > > > > [...] > > > > [ 2.544917] mvpp2 MRVL0110:00 eth1: configuring for > > > > inband/10gbase-r link mode > > > > [ 2.552480] mvpp2 MRVL0110:00 eth1: Link is Up - 10Gbps/Full - flow > > > > control rx > > > > [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver > > > > [Marvell 88E1510] (irq=POLL) > > > > [ 2.630060] mvpp2 MRVL0110:00 eth2: configuring for phy/rgmii-id link mode > > > > [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver > > > > [Marvell 88E1510] (irq=POLL) > > > > [ 2.750056] mvpp2 MRVL0110:00 eth3: configuring for phy/rgmii-id link mode > > > > [ 2.810169] mvpp2 MRVL0110:01 eth4: configuring for > > > > inband/10gbase-r link mode > > > > [ 2.817471] mvpp2 MRVL0110:01 eth4: Link is Up - 10Gbps/Full - flow > > > > control rx > > > > [ 5.693231] mvpp2 MRVL0110:00 eth2: Link is Up - 1Gbps/Full - flow > > > > control off > > > > [ 10.840942] mvpp2 MRVL0110:00 eth1: Link is Down > > > > [ 10.864124] mvpp2 MRVL0110:01 eth4: Link is Down > > > > # > > > > > > > > > > Both platforms were have been additionally tested by Greg, do you have > > > any comments/objections to merging this patchset? > > > > > > Thanks, > > > Marcin > > > > You can add my Tested-by as well. Finally got time over the weekend > > to verify on all my Marvell platforms this effects. > > > > Thanks all. I will get to this shortly - apologies for the delay. Pushed as bfabeef4c9a6..955187a12a8b Thanks all. -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#77871): https://edk2.groups.io/g/devel/message/77871 Mute This Topic: https://groups.io/mt/83513508/1787277 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org] -=-=-=-=-=-=-=-=-=-=-=-
Hi Ard, pon., 19 lip 2021 o 09:28 Ard Biesheuvel <ardb@kernel.org> napisał(a): > > On Fri, 16 Jul 2021 at 19:32, Ard Biesheuvel <ardb@kernel.org> wrote: > > > > On Mon, 12 Jul 2021 at 13:17, Jon Nettleton <jon@solid-run.com> wrote: > > > > > > On Mon, Jul 12, 2021 at 12:52 PM Marcin Wojtas <mw@semihalf.com> wrote: > > > > > > > > Hi, > > > > > > > > wt., 29 cze 2021 o 16:17 Marcin Wojtas <mw@semihalf.com> napisał(a): > > > > > > > > > > Hi Leif, > > > > > > > > > > pon., 14 cze 2021 o 23:55 Leif Lindholm <leif@nuviainc.com> napisał(a): > > > > > > > > > > > > Hi Marcin, > > > > > > > > > > > > On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote: > > > > > > > Hi, > > > > > > > > > > > > > > The MDIO ACPI binding has been established and merged to the > > > > > > > Linux tree, > > > > > > > > > > > > Congratulations! :) > > > > > > > > > > > > Is FreeBSD expected to follow suit? > > > > > > > > > > There's no driver yet, but once it's finally created I will make sure > > > > > it supports ACPI properly. > > > > > > > > > > > > > > > > > > hence it is now possible to update the ACPI > > > > > > > description of the platforms that base on the Marvell SoCs. > > > > > > > > > > > > > > For convenience, the code is exposed in the public github branch: > > > > > > > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613 > > > > > > > There is also MacchiatoBin firmware binary avaialable for testing: > > > > > > > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0 > > > > > > > > > > > > > > I'm looking forward to the comments or remarks. > > > > > > > > > > > > The patches themselves look straightforward enough. > > > > > > I *would* prefer some tested-by, for these sources rather than the > > > > > > binary, before merging though. > > > > > > > > > > > > > > > > I have some our patches queued, that are blocked by this patchset. In > > > > > case no time is found for external testers - if this may help to get > > > > > it pushed through, please see below logs from the next-20210628 tag > > > > > and unchanged firmware. All network ports of MacchiatoBin and > > > > > CN913x-DB work properly, with full 1G/10G PHY support via X/MDIO > > > > > interfaces: > > > > > > > > > > MacchiatoBin > > > > > # uname -a > > > > > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 > > > > > 09:14:07 CEST 2021 aarch64 GNU/Linux > > > > > # dmesg | grep MRVL0101 > > > > > [ 1.829659] mv88x3340 MRVL0101:00-mii:00: Firmware version 0.3.3.0 > > > > > [ 1.839622] mv88x3340 MRVL0101:00-mii:08: Firmware version 0.3.3.0 > > > > > [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver > > > > > [mv88x3340] (irq=POLL) > > > > > [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver > > > > > [mv88x3340] (irq=POLL) > > > > > # dmesg | grep MRVL0100 > > > > > [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver > > > > > [Marvell 88E1510] (irq=POLL) > > > > > # dmesg | grep mvpp2 > > > > > [...] > > > > > [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver > > > > > [mv88x3340] (irq=POLL) > > > > > [ 2.756701] mvpp2 MRVL0110:00 eth1: configuring for phy/10gbase-r link mode > > > > > [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver > > > > > [mv88x3340] (irq=POLL) > > > > > [ 2.775834] mvpp2 MRVL0110:01 eth2: configuring for phy/10gbase-r link mode > > > > > [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver > > > > > [Marvell 88E1510] (irq=POLL) > > > > > [ 2.928285] mvpp2 MRVL0110:01 eth3: configuring for phy/sgmii link mode > > > > > [ 2.936351] mvpp2 MRVL0110:01 eth4: configuring for > > > > > inband/2500base-x link mode > > > > > [ 5.987259] mvpp2 MRVL0110:01 eth3: Link is Up - 1Gbps/Full - flow > > > > > control off > > > > > # > > > > > > > > > > CN913x-DB > > > > > # uname -a > > > > > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 > > > > > 09:14:07 CEST 2021 aarch64 GNU/Linux > > > > > # dmesg | grep MRVL0100 > > > > > [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver > > > > > [Marvell 88E1510] (irq=POLL) > > > > > [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver > > > > > [Marvell 88E1510] (irq=POLL) > > > > > # dmesg | grep mvpp2 > > > > > [...] > > > > > [ 2.544917] mvpp2 MRVL0110:00 eth1: configuring for > > > > > inband/10gbase-r link mode > > > > > [ 2.552480] mvpp2 MRVL0110:00 eth1: Link is Up - 10Gbps/Full - flow > > > > > control rx > > > > > [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver > > > > > [Marvell 88E1510] (irq=POLL) > > > > > [ 2.630060] mvpp2 MRVL0110:00 eth2: configuring for phy/rgmii-id link mode > > > > > [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver > > > > > [Marvell 88E1510] (irq=POLL) > > > > > [ 2.750056] mvpp2 MRVL0110:00 eth3: configuring for phy/rgmii-id link mode > > > > > [ 2.810169] mvpp2 MRVL0110:01 eth4: configuring for > > > > > inband/10gbase-r link mode > > > > > [ 2.817471] mvpp2 MRVL0110:01 eth4: Link is Up - 10Gbps/Full - flow > > > > > control rx > > > > > [ 5.693231] mvpp2 MRVL0110:00 eth2: Link is Up - 1Gbps/Full - flow > > > > > control off > > > > > [ 10.840942] mvpp2 MRVL0110:00 eth1: Link is Down > > > > > [ 10.864124] mvpp2 MRVL0110:01 eth4: Link is Down > > > > > # > > > > > > > > > > > > > Both platforms were have been additionally tested by Greg, do you have > > > > any comments/objections to merging this patchset? > > > > > > > > Thanks, > > > > Marcin > > > > > > You can add my Tested-by as well. Finally got time over the weekend > > > to verify on all my Marvell platforms this effects. > > > > > > > Thanks all. I will get to this shortly - apologies for the delay. > > Pushed as bfabeef4c9a6..955187a12a8b > > Thanks all. Thanks a lot! I'd appreciate if you were able to take a look at our new patchset I just submitted on top of the merged changes. Best regards, Marcin -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#77887): https://edk2.groups.io/g/devel/message/77887 Mute This Topic: https://groups.io/mt/83513508/1787277 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org] -=-=-=-=-=-=-=-=-=-=-=-
© 2016 - 2024 Red Hat, Inc.