Add logic in EjectCpu() to do the actual the CPU ejection.
On the BSP, ejection happens by first selecting the CPU via
its QemuSelector and then sending the QEMU "eject" command.
QEMU in-turn signals the remote VCPU thread which context-switches
the CPU out of the SMI handler.
Meanwhile the CPU being ejected, waits around in its holding
area until it is context-switched out. Note that it is possible
that a slow CPU gets ejected before it reaches the wait loop.
However, this would never happen before it has executed the
"AllCpusInSync" loop in SmiRendezvous().
It can mean that an ejected CPU does not execute code after
that point but given that the CPU state will be destroyed by
QEMU, the missed cleanup is no great loss.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
---
Notes:
Addresses the following comments from v8:
(1a,1b) CheckIfBsp(): get rid of ProcessorNum, document retval.
(2) Line up IsBsp and ApicBaseMsr
(3) s/ongoing SMI iteration/ongoing SMI/
(4) Get rid of the allusions to alignment in the comment in EjectCpu().
() Also reduce some of the repetitive detail in this comment.
(5) EjectCpu(): reorder logic to cleanly separate the AP and the BSP portions.
(6) Get rid of unnecessary MemoryFence() between QemuCpuhpWrite
and clearing of the eject status.
(7) Change type of QemuSelector to %Lu in DEBUG statement
(8) Get rid of the repetitive comment in SmmCpuFeaturesRendezvousExit().
The necessary parts of this got moved to patch-7.
OvmfPkg/Include/IndustryStandard/QemuCpuHotplug.h | 1 +
OvmfPkg/CpuHotplugSmm/CpuHotplug.c | 113 ++++++++++++++++++++--
2 files changed, 108 insertions(+), 6 deletions(-)
diff --git a/OvmfPkg/Include/IndustryStandard/QemuCpuHotplug.h b/OvmfPkg/Include/IndustryStandard/QemuCpuHotplug.h
index 2ec7a107a64d..d0e83102c13f 100644
--- a/OvmfPkg/Include/IndustryStandard/QemuCpuHotplug.h
+++ b/OvmfPkg/Include/IndustryStandard/QemuCpuHotplug.h
@@ -34,6 +34,7 @@
#define QEMU_CPUHP_STAT_ENABLED BIT0
#define QEMU_CPUHP_STAT_INSERT BIT1
#define QEMU_CPUHP_STAT_REMOVE BIT2
+#define QEMU_CPUHP_STAT_EJECT BIT3
#define QEMU_CPUHP_STAT_FW_REMOVE BIT4
#define QEMU_CPUHP_RW_CMD_DATA 0x8
diff --git a/OvmfPkg/CpuHotplugSmm/CpuHotplug.c b/OvmfPkg/CpuHotplugSmm/CpuHotplug.c
index 2eeb4567a262..ae3abd525900 100644
--- a/OvmfPkg/CpuHotplugSmm/CpuHotplug.c
+++ b/OvmfPkg/CpuHotplugSmm/CpuHotplug.c
@@ -18,6 +18,7 @@
#include <Pcd/CpuHotEjectData.h> // CPU_HOT_EJECT_DATA
#include <Protocol/MmCpuIo.h> // EFI_MM_CPU_IO_PROTOCOL
#include <Protocol/SmmCpuService.h> // EFI_SMM_CPU_SERVICE_PROTOCOL
+#include <Register/Intel/ArchitecturalMsr.h> // MSR_IA32_APIC_BASE_REGISTER
#include <Uefi/UefiBaseType.h> // EFI_STATUS
#include "ApicId.h" // APIC_ID
@@ -193,12 +194,40 @@ RevokeNewSlot:
}
/**
+ EjectCpu needs to know the BSP at SMI exit at a point when
+ some of the EFI_SMM_CPU_SERVICE_PROTOCOL state has been torn
+ down.
+ Reuse the logic from OvmfPkg::PlatformSmmBspElection() to
+ do that.
+
+ @retval TRUE If the CPU executing this function is the BSP.
+
+ @retval FALSE If the CPU executing this function is an AP.
+**/
+STATIC
+BOOLEAN
+CheckIfBsp (
+ VOID
+ )
+{
+ MSR_IA32_APIC_BASE_REGISTER ApicBaseMsr;
+ BOOLEAN IsBsp;
+
+ ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE);
+ IsBsp = (BOOLEAN)(ApicBaseMsr.Bits.BSP == 1);
+ return IsBsp;
+}
+
+/**
CPU Hot-eject handler, called from SmmCpuFeaturesRendezvousExit()
on each CPU at exit from SMM.
- If, the executing CPU is not being ejected, nothing to be done.
+ If, the executing CPU is neither the BSP, nor being ejected, nothing
+ to be done.
If, the executing CPU is being ejected, wait in a halted loop
until ejected.
+ If, the executing CPU is the BSP, set QEMU CPU status to eject
+ for CPUs being ejected.
@param[in] ProcessorNum ProcessorNum denotes the CPU exiting SMM,
and will be used as an index into
@@ -214,6 +243,83 @@ EjectCpu (
{
UINT64 QemuSelector;
+ if (CheckIfBsp ()) {
+ UINT32 Idx;
+
+ for (Idx = 0; Idx < mCpuHotEjectData->ArrayLength; Idx++) {
+ UINT64 QemuSelector;
+
+ QemuSelector = mCpuHotEjectData->QemuSelectorMap[Idx];
+
+ if (QemuSelector != CPU_EJECT_QEMU_SELECTOR_INVALID) {
+ //
+ // This to-be-ejected-CPU has already received the BSP's SMI exit
+ // signal and will execute SmmCpuFeaturesRendezvousExit()
+ // followed by this callback or is already penned in the
+ // CpuSleep() loop below.
+ //
+ // Tell QEMU to context-switch it out.
+ //
+ QemuCpuhpWriteCpuSelector (mMmCpuIo, (UINT32) QemuSelector);
+ QemuCpuhpWriteCpuStatus (mMmCpuIo, QEMU_CPUHP_STAT_EJECT);
+
+ //
+ // Now that we've ejected the CPU corresponding to QemuSelectorMap[Idx],
+ // clear its eject status to ensure that an invalid future SMI does
+ // not end up trying a spurious eject or a newly hotplugged CPU does
+ // not get penned in the CpuSleep() loop.
+ //
+ // Note that the QemuCpuhpWriteCpuStatus() command above is a write to
+ // a different address space and uses the EFI_MM_CPU_IO_PROTOCOL.
+ //
+ // This means that we are guaranteed that the following assignment
+ // will not be reordered before the eject. And, so we can safely
+ // do this write here.
+ //
+ mCpuHotEjectData->QemuSelectorMap[Idx] =
+ CPU_EJECT_QEMU_SELECTOR_INVALID;
+
+ DEBUG ((DEBUG_INFO, "%a: Unplugged ProcessorNum %u, "
+ "QemuSelector %Lu\n", __FUNCTION__, Idx, QemuSelector));
+ }
+ }
+
+ //
+ // We are done until the next hot-unplug; clear the handler.
+ //
+ // mCpuHotEjectData->Handler is a NOP for any CPU not under ejection.
+ // So, once we are done with all the ejections, we can safely reset it
+ // here since any CPU dereferencing it would only see either the old
+ // or the new value (since it is aligned at a natural boundary.)
+ //
+ mCpuHotEjectData->Handler = NULL;
+ return;
+ }
+
+ //
+ // Reached only on APs
+ //
+
+ //
+ // mCpuHotEjectData->QemuSelectorMap[ProcessorNum] is updated
+ // on the BSP in the ongoing SMI at two places:
+ //
+ // - UnplugCpus() where the BSP determines if a CPU is under ejection
+ // or not. As a comment in UnplugCpus() at set-up, and in
+ // SmmCpuFeaturesRendezvousExit() where it is dereferenced describe,
+ // any such updates are guaranteed to be ordered-before the
+ // dereference below.
+ //
+ // - EjectCpu() on the BSP (above) updates QemuSelectorMap[ProcessorNum]
+ // for a CPU once it's ejected.
+ //
+ // The CPU under ejection: might be executing anywhere between the
+ // AllCpusInSync loop in SmiRendezvous(), to about to dereference
+ // QemuSelectorMap[ProcessorNum].
+ // As described in the comment above where we do the reset, this
+ // is not a problem since the ejected CPU never sees the after value.
+ // CPUs not-under ejection: never see any changes so they are fine.
+ //
QemuSelector = mCpuHotEjectData->QemuSelectorMap[ProcessorNum];
if (QemuSelector == CPU_EJECT_QEMU_SELECTOR_INVALID) {
return;
@@ -495,11 +601,6 @@ CpuHotplugMmi (
if (EFI_ERROR (Status)) {
goto Fatal;
}
- if (ToUnplugCount > 0) {
- DEBUG ((DEBUG_ERROR, "%a: hot-unplug is not supported yet\n",
- __FUNCTION__));
- goto Fatal;
- }
if (PluggedCount > 0) {
Status = ProcessHotAddedCpus (mPluggedApicIds, PluggedCount);
--
2.9.3
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#72710): https://edk2.groups.io/g/devel/message/72710
Mute This Topic: https://groups.io/mt/81273610/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
On 03/12/21 07:26, Ankur Arora wrote:
> Add logic in EjectCpu() to do the actual the CPU ejection.
>
> On the BSP, ejection happens by first selecting the CPU via
> its QemuSelector and then sending the QEMU "eject" command.
> QEMU in-turn signals the remote VCPU thread which context-switches
> the CPU out of the SMI handler.
>
> Meanwhile the CPU being ejected, waits around in its holding
> area until it is context-switched out. Note that it is possible
> that a slow CPU gets ejected before it reaches the wait loop.
> However, this would never happen before it has executed the
> "AllCpusInSync" loop in SmiRendezvous().
> It can mean that an ejected CPU does not execute code after
> that point but given that the CPU state will be destroyed by
> QEMU, the missed cleanup is no great loss.
>
> Cc: Laszlo Ersek <lersek@redhat.com>
> Cc: Jordan Justen <jordan.l.justen@intel.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
> Cc: Igor Mammedov <imammedo@redhat.com>
> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> Cc: Aaron Young <aaron.young@oracle.com>
> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
> Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
> ---
>
> Notes:
> Addresses the following comments from v8:
>
> (1a,1b) CheckIfBsp(): get rid of ProcessorNum, document retval.
> (2) Line up IsBsp and ApicBaseMsr
> (3) s/ongoing SMI iteration/ongoing SMI/
> (4) Get rid of the allusions to alignment in the comment in EjectCpu().
> () Also reduce some of the repetitive detail in this comment.
> (5) EjectCpu(): reorder logic to cleanly separate the AP and the BSP portions.
> (6) Get rid of unnecessary MemoryFence() between QemuCpuhpWrite
> and clearing of the eject status.
> (7) Change type of QemuSelector to %Lu in DEBUG statement
> (8) Get rid of the repetitive comment in SmmCpuFeaturesRendezvousExit().
> The necessary parts of this got moved to patch-7.
>
> OvmfPkg/Include/IndustryStandard/QemuCpuHotplug.h | 1 +
> OvmfPkg/CpuHotplugSmm/CpuHotplug.c | 113 ++++++++++++++++++++--
> 2 files changed, 108 insertions(+), 6 deletions(-)
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Thanks
Laszlo
>
> diff --git a/OvmfPkg/Include/IndustryStandard/QemuCpuHotplug.h b/OvmfPkg/Include/IndustryStandard/QemuCpuHotplug.h
> index 2ec7a107a64d..d0e83102c13f 100644
> --- a/OvmfPkg/Include/IndustryStandard/QemuCpuHotplug.h
> +++ b/OvmfPkg/Include/IndustryStandard/QemuCpuHotplug.h
> @@ -34,6 +34,7 @@
> #define QEMU_CPUHP_STAT_ENABLED BIT0
> #define QEMU_CPUHP_STAT_INSERT BIT1
> #define QEMU_CPUHP_STAT_REMOVE BIT2
> +#define QEMU_CPUHP_STAT_EJECT BIT3
> #define QEMU_CPUHP_STAT_FW_REMOVE BIT4
>
> #define QEMU_CPUHP_RW_CMD_DATA 0x8
> diff --git a/OvmfPkg/CpuHotplugSmm/CpuHotplug.c b/OvmfPkg/CpuHotplugSmm/CpuHotplug.c
> index 2eeb4567a262..ae3abd525900 100644
> --- a/OvmfPkg/CpuHotplugSmm/CpuHotplug.c
> +++ b/OvmfPkg/CpuHotplugSmm/CpuHotplug.c
> @@ -18,6 +18,7 @@
> #include <Pcd/CpuHotEjectData.h> // CPU_HOT_EJECT_DATA
> #include <Protocol/MmCpuIo.h> // EFI_MM_CPU_IO_PROTOCOL
> #include <Protocol/SmmCpuService.h> // EFI_SMM_CPU_SERVICE_PROTOCOL
> +#include <Register/Intel/ArchitecturalMsr.h> // MSR_IA32_APIC_BASE_REGISTER
> #include <Uefi/UefiBaseType.h> // EFI_STATUS
>
> #include "ApicId.h" // APIC_ID
> @@ -193,12 +194,40 @@ RevokeNewSlot:
> }
>
> /**
> + EjectCpu needs to know the BSP at SMI exit at a point when
> + some of the EFI_SMM_CPU_SERVICE_PROTOCOL state has been torn
> + down.
> + Reuse the logic from OvmfPkg::PlatformSmmBspElection() to
> + do that.
> +
> + @retval TRUE If the CPU executing this function is the BSP.
> +
> + @retval FALSE If the CPU executing this function is an AP.
> +**/
> +STATIC
> +BOOLEAN
> +CheckIfBsp (
> + VOID
> + )
> +{
> + MSR_IA32_APIC_BASE_REGISTER ApicBaseMsr;
> + BOOLEAN IsBsp;
> +
> + ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE);
> + IsBsp = (BOOLEAN)(ApicBaseMsr.Bits.BSP == 1);
> + return IsBsp;
> +}
> +
> +/**
> CPU Hot-eject handler, called from SmmCpuFeaturesRendezvousExit()
> on each CPU at exit from SMM.
>
> - If, the executing CPU is not being ejected, nothing to be done.
> + If, the executing CPU is neither the BSP, nor being ejected, nothing
> + to be done.
> If, the executing CPU is being ejected, wait in a halted loop
> until ejected.
> + If, the executing CPU is the BSP, set QEMU CPU status to eject
> + for CPUs being ejected.
>
> @param[in] ProcessorNum ProcessorNum denotes the CPU exiting SMM,
> and will be used as an index into
> @@ -214,6 +243,83 @@ EjectCpu (
> {
> UINT64 QemuSelector;
>
> + if (CheckIfBsp ()) {
> + UINT32 Idx;
> +
> + for (Idx = 0; Idx < mCpuHotEjectData->ArrayLength; Idx++) {
> + UINT64 QemuSelector;
> +
> + QemuSelector = mCpuHotEjectData->QemuSelectorMap[Idx];
> +
> + if (QemuSelector != CPU_EJECT_QEMU_SELECTOR_INVALID) {
> + //
> + // This to-be-ejected-CPU has already received the BSP's SMI exit
> + // signal and will execute SmmCpuFeaturesRendezvousExit()
> + // followed by this callback or is already penned in the
> + // CpuSleep() loop below.
> + //
> + // Tell QEMU to context-switch it out.
> + //
> + QemuCpuhpWriteCpuSelector (mMmCpuIo, (UINT32) QemuSelector);
> + QemuCpuhpWriteCpuStatus (mMmCpuIo, QEMU_CPUHP_STAT_EJECT);
> +
> + //
> + // Now that we've ejected the CPU corresponding to QemuSelectorMap[Idx],
> + // clear its eject status to ensure that an invalid future SMI does
> + // not end up trying a spurious eject or a newly hotplugged CPU does
> + // not get penned in the CpuSleep() loop.
> + //
> + // Note that the QemuCpuhpWriteCpuStatus() command above is a write to
> + // a different address space and uses the EFI_MM_CPU_IO_PROTOCOL.
> + //
> + // This means that we are guaranteed that the following assignment
> + // will not be reordered before the eject. And, so we can safely
> + // do this write here.
> + //
> + mCpuHotEjectData->QemuSelectorMap[Idx] =
> + CPU_EJECT_QEMU_SELECTOR_INVALID;
> +
> + DEBUG ((DEBUG_INFO, "%a: Unplugged ProcessorNum %u, "
> + "QemuSelector %Lu\n", __FUNCTION__, Idx, QemuSelector));
> + }
> + }
> +
> + //
> + // We are done until the next hot-unplug; clear the handler.
> + //
> + // mCpuHotEjectData->Handler is a NOP for any CPU not under ejection.
> + // So, once we are done with all the ejections, we can safely reset it
> + // here since any CPU dereferencing it would only see either the old
> + // or the new value (since it is aligned at a natural boundary.)
> + //
> + mCpuHotEjectData->Handler = NULL;
> + return;
> + }
> +
> + //
> + // Reached only on APs
> + //
> +
> + //
> + // mCpuHotEjectData->QemuSelectorMap[ProcessorNum] is updated
> + // on the BSP in the ongoing SMI at two places:
> + //
> + // - UnplugCpus() where the BSP determines if a CPU is under ejection
> + // or not. As a comment in UnplugCpus() at set-up, and in
> + // SmmCpuFeaturesRendezvousExit() where it is dereferenced describe,
> + // any such updates are guaranteed to be ordered-before the
> + // dereference below.
> + //
> + // - EjectCpu() on the BSP (above) updates QemuSelectorMap[ProcessorNum]
> + // for a CPU once it's ejected.
> + //
> + // The CPU under ejection: might be executing anywhere between the
> + // AllCpusInSync loop in SmiRendezvous(), to about to dereference
> + // QemuSelectorMap[ProcessorNum].
> + // As described in the comment above where we do the reset, this
> + // is not a problem since the ejected CPU never sees the after value.
> + // CPUs not-under ejection: never see any changes so they are fine.
> + //
> QemuSelector = mCpuHotEjectData->QemuSelectorMap[ProcessorNum];
> if (QemuSelector == CPU_EJECT_QEMU_SELECTOR_INVALID) {
> return;
> @@ -495,11 +601,6 @@ CpuHotplugMmi (
> if (EFI_ERROR (Status)) {
> goto Fatal;
> }
> - if (ToUnplugCount > 0) {
> - DEBUG ((DEBUG_ERROR, "%a: hot-unplug is not supported yet\n",
> - __FUNCTION__));
> - goto Fatal;
> - }
>
> if (PluggedCount > 0) {
> Status = ProcessHotAddedCpus (mPluggedApicIds, PluggedCount);
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#72868): https://edk2.groups.io/g/devel/message/72868
Mute This Topic: https://groups.io/mt/81273610/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
On 03/12/21 07:26, Ankur Arora wrote:
> @@ -214,6 +243,83 @@ EjectCpu (
> {
> UINT64 QemuSelector;
>
> + if (CheckIfBsp ()) {
> + UINT32 Idx;
> +
> + for (Idx = 0; Idx < mCpuHotEjectData->ArrayLength; Idx++) {
> + UINT64 QemuSelector;
Visual Studio warns that the inner QemuSelector declaration shadows the
outer one. I'm going to remove the inner declaration, due to:
> +
> + QemuSelector = mCpuHotEjectData->QemuSelectorMap[Idx];
> +
> + if (QemuSelector != CPU_EJECT_QEMU_SELECTOR_INVALID) {
> + //
> + // This to-be-ejected-CPU has already received the BSP's SMI exit
> + // signal and will execute SmmCpuFeaturesRendezvousExit()
> + // followed by this callback or is already penned in the
> + // CpuSleep() loop below.
> + //
> + // Tell QEMU to context-switch it out.
> + //
> + QemuCpuhpWriteCpuSelector (mMmCpuIo, (UINT32) QemuSelector);
> + QemuCpuhpWriteCpuStatus (mMmCpuIo, QEMU_CPUHP_STAT_EJECT);
> +
> + //
> + // Now that we've ejected the CPU corresponding to QemuSelectorMap[Idx],
> + // clear its eject status to ensure that an invalid future SMI does
> + // not end up trying a spurious eject or a newly hotplugged CPU does
> + // not get penned in the CpuSleep() loop.
> + //
> + // Note that the QemuCpuhpWriteCpuStatus() command above is a write to
> + // a different address space and uses the EFI_MM_CPU_IO_PROTOCOL.
> + //
> + // This means that we are guaranteed that the following assignment
> + // will not be reordered before the eject. And, so we can safely
> + // do this write here.
> + //
> + mCpuHotEjectData->QemuSelectorMap[Idx] =
> + CPU_EJECT_QEMU_SELECTOR_INVALID;
> +
> + DEBUG ((DEBUG_INFO, "%a: Unplugged ProcessorNum %u, "
> + "QemuSelector %Lu\n", __FUNCTION__, Idx, QemuSelector));
> + }
> + }
> +
> + //
> + // We are done until the next hot-unplug; clear the handler.
> + //
> + // mCpuHotEjectData->Handler is a NOP for any CPU not under ejection.
> + // So, once we are done with all the ejections, we can safely reset it
> + // here since any CPU dereferencing it would only see either the old
> + // or the new value (since it is aligned at a natural boundary.)
> + //
> + mCpuHotEjectData->Handler = NULL;
> + return;
> + }
> +
> + //
> + // Reached only on APs
> + //
> +
> + //
> + // mCpuHotEjectData->QemuSelectorMap[ProcessorNum] is updated
> + // on the BSP in the ongoing SMI at two places:
> + //
> + // - UnplugCpus() where the BSP determines if a CPU is under ejection
> + // or not. As a comment in UnplugCpus() at set-up, and in
> + // SmmCpuFeaturesRendezvousExit() where it is dereferenced describe,
> + // any such updates are guaranteed to be ordered-before the
> + // dereference below.
> + //
> + // - EjectCpu() on the BSP (above) updates QemuSelectorMap[ProcessorNum]
> + // for a CPU once it's ejected.
> + //
> + // The CPU under ejection: might be executing anywhere between the
> + // AllCpusInSync loop in SmiRendezvous(), to about to dereference
> + // QemuSelectorMap[ProcessorNum].
> + // As described in the comment above where we do the reset, this
> + // is not a problem since the ejected CPU never sees the after value.
> + // CPUs not-under ejection: never see any changes so they are fine.
> + //
> QemuSelector = mCpuHotEjectData->QemuSelectorMap[ProcessorNum];
this reference being to the outer one.
Thanks
Laszlo
> if (QemuSelector == CPU_EJECT_QEMU_SELECTOR_INVALID) {
> return;
> @@ -495,11 +601,6 @@ CpuHotplugMmi (
> if (EFI_ERROR (Status)) {
> goto Fatal;
> }
> - if (ToUnplugCount > 0) {
> - DEBUG ((DEBUG_ERROR, "%a: hot-unplug is not supported yet\n",
> - __FUNCTION__));
> - goto Fatal;
> - }
>
> if (PluggedCount > 0) {
> Status = ProcessHotAddedCpus (mPluggedApicIds, PluggedCount);
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#72870): https://edk2.groups.io/g/devel/message/72870
Mute This Topic: https://groups.io/mt/81273610/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
© 2016 - 2024 Red Hat, Inc.