Open PciIo protocol and use it to initialize the device. The
initialization of LSI 53C895A is simple: just set the SRST bit in
Interrupt Status Zero register to reset the device.
v2:
- Use the BITx macros for the bit constants
- Add the closing of PciIo protocol in LsiScsiControllerStop()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
---
OvmfPkg/Include/IndustryStandard/LsiScsi.h | 21 ++++
OvmfPkg/LsiScsiDxe/LsiScsi.c | 136 ++++++++++++++++++++-
OvmfPkg/LsiScsiDxe/LsiScsi.h | 3 +
3 files changed, 159 insertions(+), 1 deletion(-)
diff --git a/OvmfPkg/Include/IndustryStandard/LsiScsi.h b/OvmfPkg/Include/IndustryStandard/LsiScsi.h
index c09e864a1f39..185e553c8eb4 100644
--- a/OvmfPkg/Include/IndustryStandard/LsiScsi.h
+++ b/OvmfPkg/Include/IndustryStandard/LsiScsi.h
@@ -17,4 +17,25 @@
#define LSI_LOGIC_PCI_VENDOR_ID 0x1000
#define LSI_53C895A_PCI_DEVICE_ID 0x0012
+//
+// LSI 53C895A Registers
+//
+#define LSI_REG_DSTAT 0x0C
+#define LSI_REG_ISTAT0 0x14
+#define LSI_REG_DSP 0x2C
+#define LSI_REG_SIST0 0x42
+#define LSI_REG_SIST1 0x43
+
+//
+// The status bits for Interrupt Status Zero (ISTAT0)
+//
+#define LSI_ISTAT0_DIP BIT0
+#define LSI_ISTAT0_SIP BIT1
+#define LSI_ISTAT0_INTF BIT2
+#define LSI_ISTAT0_CON BIT3
+#define LSI_ISTAT0_SEM BIT4
+#define LSI_ISTAT0_SIGP BIT5
+#define LSI_ISTAT0_SRST BIT6
+#define LSI_ISTAT0_ABRT BIT7
+
#endif // _LSI_SCSI_H_
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.c b/OvmfPkg/LsiScsiDxe/LsiScsi.c
index 989bda88d209..b21387db6e5a 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.c
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.c
@@ -25,6 +25,33 @@
#include "LsiScsi.h"
+STATIC
+EFI_STATUS
+Out8 (
+ IN LSI_SCSI_DEV *Dev,
+ IN UINT32 Addr,
+ IN UINT8 Data
+ )
+{
+ return Dev->PciIo->Io.Write (
+ Dev->PciIo,
+ EfiPciIoWidthUint8,
+ PCI_BAR_IDX0,
+ Addr,
+ 1,
+ &Data
+ );
+}
+
+STATIC
+EFI_STATUS
+LsiScsiReset (
+ IN LSI_SCSI_DEV *Dev
+ )
+{
+ return Out8 (Dev, LSI_REG_ISTAT0, LSI_ISTAT0_SRST);
+}
+
//
// The next seven functions implement EFI_EXT_SCSI_PASS_THRU_PROTOCOL
// for the LSI 53C895A SCSI Controller. Refer to UEFI Spec 2.3.1 + Errata C,
@@ -243,6 +270,21 @@ LsiScsiGetNextTarget (
return EFI_NOT_FOUND;
}
+STATIC
+VOID
+EFIAPI
+LsiScsiExitBoot (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ LSI_SCSI_DEV *Dev;
+
+ Dev = Context;
+ DEBUG ((DEBUG_VERBOSE, "%a: Context=0x%p\n", __FUNCTION__, Context));
+ LsiScsiReset (Dev);
+}
+
//
// Probe, start and stop functions of this driver, called by the DXE core for
// specific devices.
@@ -333,6 +375,58 @@ LsiScsiControllerStart (
Dev->MaxTarget = PcdGet8 (PcdLsiScsiMaxTargetLimit);
Dev->MaxLun = PcdGet8 (PcdLsiScsiMaxLunLimit);
+ Status = gBS->OpenProtocol (
+ ControllerHandle,
+ &gEfiPciIoProtocolGuid,
+ (VOID **)&Dev->PciIo,
+ This->DriverBindingHandle,
+ ControllerHandle,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ goto FreePool;
+ }
+
+ Status = Dev->PciIo->Attributes (
+ Dev->PciIo,
+ EfiPciIoAttributeOperationGet,
+ 0,
+ &Dev->OrigPciAttrs
+ );
+ if (EFI_ERROR (Status)) {
+ goto CloseProtocol;
+ }
+
+ //
+ // Enable I/O Space & Bus-Mastering
+ //
+ Status = Dev->PciIo->Attributes (
+ Dev->PciIo,
+ EfiPciIoAttributeOperationEnable,
+ (EFI_PCI_IO_ATTRIBUTE_IO |
+ EFI_PCI_IO_ATTRIBUTE_BUS_MASTER),
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ goto CloseProtocol;
+ }
+
+ Status = LsiScsiReset (Dev);
+ if (EFI_ERROR (Status)) {
+ goto RestoreAttributes;
+ }
+
+ Status = gBS->CreateEvent (
+ EVT_SIGNAL_EXIT_BOOT_SERVICES,
+ TPL_CALLBACK,
+ &LsiScsiExitBoot,
+ Dev,
+ &Dev->ExitBoot
+ );
+ if (EFI_ERROR (Status)) {
+ goto UninitDev;
+ }
+
//
// Host adapter channel, doesn't exist
//
@@ -357,11 +451,33 @@ LsiScsiControllerStart (
&Dev->PassThru
);
if (EFI_ERROR (Status)) {
- goto FreePool;
+ goto CloseExitBoot;
}
return EFI_SUCCESS;
+CloseExitBoot:
+ gBS->CloseEvent (Dev->ExitBoot);
+
+UninitDev:
+ LsiScsiReset (Dev);
+
+RestoreAttributes:
+ Dev->PciIo->Attributes (
+ Dev->PciIo,
+ EfiPciIoAttributeOperationSet,
+ Dev->OrigPciAttrs,
+ NULL
+ );
+
+CloseProtocol:
+ gBS->CloseProtocol (
+ ControllerHandle,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ ControllerHandle
+ );
+
FreePool:
FreePool (Dev);
@@ -404,6 +520,24 @@ LsiScsiControllerStop (
return Status;
}
+ gBS->CloseEvent (Dev->ExitBoot);
+
+ LsiScsiReset (Dev);
+
+ Dev->PciIo->Attributes (
+ Dev->PciIo,
+ EfiPciIoAttributeOperationSet,
+ Dev->OrigPciAttrs,
+ NULL
+ );
+
+ gBS->CloseProtocol (
+ ControllerHandle,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ ControllerHandle
+ );
+
FreePool (Dev);
return Status;
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.h b/OvmfPkg/LsiScsiDxe/LsiScsi.h
index 6c6ed25f1c33..8c2acff6e86f 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.h
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.h
@@ -14,6 +14,9 @@
typedef struct {
UINT32 Signature;
+ UINT64 OrigPciAttrs;
+ EFI_EVENT ExitBoot;
+ EFI_PCI_IO_PROTOCOL *PciIo;
UINT8 MaxTarget;
UINT8 MaxLun;
EFI_EXT_SCSI_PASS_THRU_MODE PassThruMode;
--
2.25.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#62661): https://edk2.groups.io/g/devel/message/62661
Mute This Topic: https://groups.io/mt/75537211/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
On 07/16/20 09:46, Gary Lin wrote:
> Open PciIo protocol and use it to initialize the device. The
> initialization of LSI 53C895A is simple: just set the SRST bit in
> Interrupt Status Zero register to reset the device.
>
> v2:
> - Use the BITx macros for the bit constants
> - Add the closing of PciIo protocol in LsiScsiControllerStop()
>
> Cc: Jordan Justen <jordan.l.justen@intel.com>
> Cc: Laszlo Ersek <lersek@redhat.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
> Signed-off-by: Gary Lin <glin@suse.com>
> ---
> OvmfPkg/Include/IndustryStandard/LsiScsi.h | 21 ++++
> OvmfPkg/LsiScsiDxe/LsiScsi.c | 136 ++++++++++++++++++++-
> OvmfPkg/LsiScsiDxe/LsiScsi.h | 3 +
> 3 files changed, 159 insertions(+), 1 deletion(-)
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Thanks
Laszlo
>
> diff --git a/OvmfPkg/Include/IndustryStandard/LsiScsi.h b/OvmfPkg/Include/IndustryStandard/LsiScsi.h
> index c09e864a1f39..185e553c8eb4 100644
> --- a/OvmfPkg/Include/IndustryStandard/LsiScsi.h
> +++ b/OvmfPkg/Include/IndustryStandard/LsiScsi.h
> @@ -17,4 +17,25 @@
> #define LSI_LOGIC_PCI_VENDOR_ID 0x1000
> #define LSI_53C895A_PCI_DEVICE_ID 0x0012
>
> +//
> +// LSI 53C895A Registers
> +//
> +#define LSI_REG_DSTAT 0x0C
> +#define LSI_REG_ISTAT0 0x14
> +#define LSI_REG_DSP 0x2C
> +#define LSI_REG_SIST0 0x42
> +#define LSI_REG_SIST1 0x43
> +
> +//
> +// The status bits for Interrupt Status Zero (ISTAT0)
> +//
> +#define LSI_ISTAT0_DIP BIT0
> +#define LSI_ISTAT0_SIP BIT1
> +#define LSI_ISTAT0_INTF BIT2
> +#define LSI_ISTAT0_CON BIT3
> +#define LSI_ISTAT0_SEM BIT4
> +#define LSI_ISTAT0_SIGP BIT5
> +#define LSI_ISTAT0_SRST BIT6
> +#define LSI_ISTAT0_ABRT BIT7
> +
> #endif // _LSI_SCSI_H_
> diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.c b/OvmfPkg/LsiScsiDxe/LsiScsi.c
> index 989bda88d209..b21387db6e5a 100644
> --- a/OvmfPkg/LsiScsiDxe/LsiScsi.c
> +++ b/OvmfPkg/LsiScsiDxe/LsiScsi.c
> @@ -25,6 +25,33 @@
>
> #include "LsiScsi.h"
>
> +STATIC
> +EFI_STATUS
> +Out8 (
> + IN LSI_SCSI_DEV *Dev,
> + IN UINT32 Addr,
> + IN UINT8 Data
> + )
> +{
> + return Dev->PciIo->Io.Write (
> + Dev->PciIo,
> + EfiPciIoWidthUint8,
> + PCI_BAR_IDX0,
> + Addr,
> + 1,
> + &Data
> + );
> +}
> +
> +STATIC
> +EFI_STATUS
> +LsiScsiReset (
> + IN LSI_SCSI_DEV *Dev
> + )
> +{
> + return Out8 (Dev, LSI_REG_ISTAT0, LSI_ISTAT0_SRST);
> +}
> +
> //
> // The next seven functions implement EFI_EXT_SCSI_PASS_THRU_PROTOCOL
> // for the LSI 53C895A SCSI Controller. Refer to UEFI Spec 2.3.1 + Errata C,
> @@ -243,6 +270,21 @@ LsiScsiGetNextTarget (
> return EFI_NOT_FOUND;
> }
>
> +STATIC
> +VOID
> +EFIAPI
> +LsiScsiExitBoot (
> + IN EFI_EVENT Event,
> + IN VOID *Context
> + )
> +{
> + LSI_SCSI_DEV *Dev;
> +
> + Dev = Context;
> + DEBUG ((DEBUG_VERBOSE, "%a: Context=0x%p\n", __FUNCTION__, Context));
> + LsiScsiReset (Dev);
> +}
> +
> //
> // Probe, start and stop functions of this driver, called by the DXE core for
> // specific devices.
> @@ -333,6 +375,58 @@ LsiScsiControllerStart (
> Dev->MaxTarget = PcdGet8 (PcdLsiScsiMaxTargetLimit);
> Dev->MaxLun = PcdGet8 (PcdLsiScsiMaxLunLimit);
>
> + Status = gBS->OpenProtocol (
> + ControllerHandle,
> + &gEfiPciIoProtocolGuid,
> + (VOID **)&Dev->PciIo,
> + This->DriverBindingHandle,
> + ControllerHandle,
> + EFI_OPEN_PROTOCOL_BY_DRIVER
> + );
> + if (EFI_ERROR (Status)) {
> + goto FreePool;
> + }
> +
> + Status = Dev->PciIo->Attributes (
> + Dev->PciIo,
> + EfiPciIoAttributeOperationGet,
> + 0,
> + &Dev->OrigPciAttrs
> + );
> + if (EFI_ERROR (Status)) {
> + goto CloseProtocol;
> + }
> +
> + //
> + // Enable I/O Space & Bus-Mastering
> + //
> + Status = Dev->PciIo->Attributes (
> + Dev->PciIo,
> + EfiPciIoAttributeOperationEnable,
> + (EFI_PCI_IO_ATTRIBUTE_IO |
> + EFI_PCI_IO_ATTRIBUTE_BUS_MASTER),
> + NULL
> + );
> + if (EFI_ERROR (Status)) {
> + goto CloseProtocol;
> + }
> +
> + Status = LsiScsiReset (Dev);
> + if (EFI_ERROR (Status)) {
> + goto RestoreAttributes;
> + }
> +
> + Status = gBS->CreateEvent (
> + EVT_SIGNAL_EXIT_BOOT_SERVICES,
> + TPL_CALLBACK,
> + &LsiScsiExitBoot,
> + Dev,
> + &Dev->ExitBoot
> + );
> + if (EFI_ERROR (Status)) {
> + goto UninitDev;
> + }
> +
> //
> // Host adapter channel, doesn't exist
> //
> @@ -357,11 +451,33 @@ LsiScsiControllerStart (
> &Dev->PassThru
> );
> if (EFI_ERROR (Status)) {
> - goto FreePool;
> + goto CloseExitBoot;
> }
>
> return EFI_SUCCESS;
>
> +CloseExitBoot:
> + gBS->CloseEvent (Dev->ExitBoot);
> +
> +UninitDev:
> + LsiScsiReset (Dev);
> +
> +RestoreAttributes:
> + Dev->PciIo->Attributes (
> + Dev->PciIo,
> + EfiPciIoAttributeOperationSet,
> + Dev->OrigPciAttrs,
> + NULL
> + );
> +
> +CloseProtocol:
> + gBS->CloseProtocol (
> + ControllerHandle,
> + &gEfiPciIoProtocolGuid,
> + This->DriverBindingHandle,
> + ControllerHandle
> + );
> +
> FreePool:
> FreePool (Dev);
>
> @@ -404,6 +520,24 @@ LsiScsiControllerStop (
> return Status;
> }
>
> + gBS->CloseEvent (Dev->ExitBoot);
> +
> + LsiScsiReset (Dev);
> +
> + Dev->PciIo->Attributes (
> + Dev->PciIo,
> + EfiPciIoAttributeOperationSet,
> + Dev->OrigPciAttrs,
> + NULL
> + );
> +
> + gBS->CloseProtocol (
> + ControllerHandle,
> + &gEfiPciIoProtocolGuid,
> + This->DriverBindingHandle,
> + ControllerHandle
> + );
> +
> FreePool (Dev);
>
> return Status;
> diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.h b/OvmfPkg/LsiScsiDxe/LsiScsi.h
> index 6c6ed25f1c33..8c2acff6e86f 100644
> --- a/OvmfPkg/LsiScsiDxe/LsiScsi.h
> +++ b/OvmfPkg/LsiScsiDxe/LsiScsi.h
> @@ -14,6 +14,9 @@
>
> typedef struct {
> UINT32 Signature;
> + UINT64 OrigPciAttrs;
> + EFI_EVENT ExitBoot;
> + EFI_PCI_IO_PROTOCOL *PciIo;
> UINT8 MaxTarget;
> UINT8 MaxLun;
> EFI_EXT_SCSI_PASS_THRU_MODE PassThruMode;
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#62704): https://edk2.groups.io/g/devel/message/62704
Mute This Topic: https://groups.io/mt/75537211/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
© 2016 - 2026 Red Hat, Inc.