On 4/30/20 10:47 AM, Andrei Warkentin wrote:
> Dear all,
>
> This is a patch set which brings in Pi 2B (v1.2), Pi 3A+
> and CM3 support. Most of this is documentation, and
> where there was some overlap I touched up RPi4 readme as well.
>
> Pi 2B v1.2 is actually a Pi 3 SoC tacked to a Pi 2 board.
> We can treat it as a WiFi- and BT- less variant of the Pi 3,
> that happens to run slower due to worse thermal design ff the Pi 2
> board.
>
> Pi 3A+ is the 512MB variant that dispensess with the USB/NIC hub.
>
> CM3 is the eMMC-bearing compute module variant, thus there is
> a MmcDxe fix to an MMC-only regression I introduced years ago. CM3L
> will probably just work (since it relies on uSD), but I don't have
> one to test with.
>
> Andrei Warkentin (4):
> RPi3/RPi4: document 3A+ support.
> RPi3: add support for the v1.2 Pi 2B.
> RPi3: add support for Compute Module 3.
> RPi3/RPi4: touch up readme's a bit.
>
Documentation changes all look fine to me, but please put the MMC bugfix
in a separate patch.
> .../RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 4 +-
> .../Drivers/ConfigDxe/ConfigDxeHii.uni | 8 +--
> .../RaspberryPi/Drivers/MmcDxe/MmcBlockIo.c | 1 +
> Platform/RaspberryPi/RPi3/Readme.md | 49 +++++++++++++------
> Platform/RaspberryPi/RPi4/Readme.md | 35 +++++++++++--
> 5 files changed, 72 insertions(+), 25 deletions(-)
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#58415): https://edk2.groups.io/g/devel/message/58415
Mute This Topic: https://groups.io/mt/73371474/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-