MdePkg/Include/Protocol/PciOverride2.h | 37 +++++++++++++++++++++++++++++++++++++ MdePkg/Include/Protocol/PciPlatform2.h | 524 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ MdePkg/MdePkg.dec | 6 ++++++ 3 files changed, 567 insertions(+)
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1954
New interface added to PCI Platform Protocol / PCI Override Protocol to
retrieve device-specific platform policy for the following PCI standard
features, like Maximum Payload Size (MPS), Maximum Read Request Size
(MRRS),Extended Tags, Relax Order, No-Snoop, Active State Power Management
(ASPM),Latency Time Reporting (LTR), AtomicOp, Reference Clock
Configuration, Extended SYNCH, PTM support, and Completion Timeout (CTO).
New source files added with enhanced definitions are in:
MdePkg/Include/Protocol/PciPlatform2.h,
MdePkg/Include/Protocol/PciOverride2.h
Signed-off-by: Ashraf Javeed <ashraf.javeed@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
---
In V4: Redefinition of the existing interfaces in the EFI_PCI_PLATFORM_-
PROTOCOL2, to avoid type casting and to avoid further future change
In V3: License update in the header sections of source files
In V2: Correction made to header sections of source files
---
MdePkg/Include/Protocol/PciOverride2.h | 37 +++++++++++++++++++++++++++++++++++++
MdePkg/Include/Protocol/PciPlatform2.h | 524 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
MdePkg/MdePkg.dec | 6 ++++++
3 files changed, 567 insertions(+)
diff --git a/MdePkg/Include/Protocol/PciOverride2.h b/MdePkg/Include/Protocol/PciOverride2.h
new file mode 100644
index 0000000000..7e878a4f1e
--- /dev/null
+++ b/MdePkg/Include/Protocol/PciOverride2.h
@@ -0,0 +1,37 @@
+/** @file
+ This file declares EFI PCI Override protocol which provides the interface between
+ the PCI bus driver/PCI Host Bridge Resource Allocation driver and an implementation's
+ driver to describe the unique features of a platform.
+ This protocol is optional.
+
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+
+**/
+
+#ifndef _PCI_OVERRIDE2_H_
+#define _PCI_OVERRIDE2_H_
+
+///
+/// EFI_PCI_OVERRIDE_PROTOCOL has the same structure with EFI_PCI_PLATFORM_PROTOCOL
+///
+#include <Protocol/PciPlatform2.h>
+
+///
+/// Global ID for the EFI_PCI_OVERRIDE_PROTOCOL
+///
+#define EFI_PCI_OVERRIDE2_GUID \
+ { \
+ 0xb9d5ea1, 0x66cb, 0x4546, {0xb0, 0xbb, 0x5c, 0x6d, 0xae, 0xd9, 0x42, 0x47} \
+ }
+
+///
+/// Declaration for EFI_PCI_OVERRIDE_PROTOCOL
+///
+typedef EFI_PCI_PLATFORM_PROTOCOL2 EFI_PCI_OVERRIDE_PROTOCOL2;
+
+
+extern EFI_GUID gEfiPciOverrideProtocol2Guid;
+
+#endif
diff --git a/MdePkg/Include/Protocol/PciPlatform2.h b/MdePkg/Include/Protocol/PciPlatform2.h
new file mode 100644
index 0000000000..6dcae70d6d
--- /dev/null
+++ b/MdePkg/Include/Protocol/PciPlatform2.h
@@ -0,0 +1,524 @@
+/** @file
+ This file declares PCI Platform Protocol that provide the interface between
+ the PCI bus driver/PCI Host Bridge Resource Allocation driver and a platform-specific
+ driver to describe the unique features of a platform.
+ This protocol is optional.
+
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+
+**/
+
+#ifndef _PCI_PLATFORM2_H_
+#define _PCI_PLATFORM2_H_
+
+///
+/// This file must be included because the EFI_PCI_PLATFORM_PROTOCOL2 uses
+/// EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE.
+///
+#include <Protocol/PciHostBridgeResourceAllocation.h>
+
+///
+/// This file is included to reuse the existing PCI Platform data structure
+/// definitions of EFI_PCI_EXECUTION_PHASE,EFI_PCI_PLATFORM_POLICY
+///
+#include <Protocol/PciPlatform.h>
+
+///
+/// Global ID for the EFI_PCI_PLATFORM_PROTOCOL2.
+///
+#define EFI_PCI_PLATFORM_PROTOCOL2_GUID \
+ { \
+ 0x787b0367, 0xa945, 0x4d60, {0x8d, 0x34, 0xb9, 0xd1, 0x88, 0xd2, 0xd0, 0xb6} \
+ }
+
+///
+/// As per the present definition and specification of this protocol, the major
+/// version is 1, and minor version is 1. Any driver utilizing this protocol
+/// shall use these versions number to maintain the backward compatibility as
+/// per its specification changes in future.
+///
+enum EfiPciPlatformProtocolVersion {
+ EFI_PCI_PLATFORM_PROTOCOL_MAJOR_VERSION = 1,
+ EFI_PCI_PLATFORM_PROTOCOL_MINOR_VERSION = 1
+};
+
+///
+/// Forward declaration for EFI_PCI_PLATFORM_PROTOCOL2.
+///
+typedef struct _EFI_PCI_PLATFORM_PROTOCOL2 EFI_PCI_PLATFORM_PROTOCOL2;
+
+///
+/// Related Definitions
+///
+
+///
+/// Following are the data types for EFI_PCI_PLATYFORM_EXTENDED_POLICY
+/// each for the PCI standard feature and its corresponding bitmask
+/// representing the valid combinations of PCI attributes
+///
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature Maximum Payload Size (MPS). Refer to PCI Base Specification
+/// 4, (chapter 7.5.3.4) on how to translate the below EFI encodings as per the
+/// PCI hardware terminology. If this data member value is returned as 0 than
+/// there is no platform policy to override, this feature would be enabled as
+/// per its PCI specification based on the device capabilities. Below is it
+/// data type and the macro definitions which the driver uses for interpreting
+/// the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_MAX_PAYLOAD_SIZE;
+
+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_128B 0x01 //set to default 128B
+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_256B 0x02 //set to 256B if applicable
+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_512B 0x03 //set to 512B if applicable
+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_1024B 0x04 //set to 1024B if applicable
+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_2048B 0x05 //set to 2048B if applicable
+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_4096B 0x06 //set to 4096B if applicable
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature Maximum Read Request Size (MRRS). Refer to PCI Base
+/// Specification 4, (chapter 7.5.3.4) on how to translate the below EFI
+/// encodings as per the PCI hardware terminology. If this data member value
+/// is returned as 0 than there is no platform policy to override, this feature
+/// would be enabled as per its PCI specification based on the device capabilities.
+/// Below is it data type and the macro definitions which the driver uses for
+/// interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_MAX_READ_REQ_SIZE;
+
+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_128B 0x01 //set to default 128B
+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_256B 0x02 //set to 256B if applicable
+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_512B 0x03 //set to 512B if applicable
+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_1024B 0x04 //set to 1024B if applicable
+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_2048B 0x05 //set to 2048B if applicable
+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_4096B 0x06 //set to 4096B if applicable
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature Extended Tags. Refer to PCI Base Specification
+/// 4, (chapter 7.5.3.4) on how to translate the below EFI encodings as per the
+/// PCI hardware terminology. If this data member value is returned as 0 than
+/// there is no platform policy to override, this feature would be enabled as
+/// per its PCI specification based on the device capabilities. Below is it
+/// data type and the macro definitions which the driver uses for interpreting
+/// the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_EXTENDED_TAG;
+
+#define EFI_PCI_CONF_EXTENDED_TAG_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_EXTENDED_TAG_5BIT 0x01 //set to default 5-bit
+#define EFI_PCI_CONF_EXTENDED_TAG_8BIT 0x02 //set to 8-bit if applicable
+#define EFI_PCI_CONF_EXTENDED_TAG_10BIT 0x03 //set to 10-bit if applicable
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature PCIe link's Active State Power Mgmt (ASPM). Refer to PCI Base
+/// Specification 4, (chapter 7.5.3.7) on how to translate the below EFI
+/// encodings as per the PCI hardware terminology. If this data member value
+/// is returned as 0 than there is no platform policy to override, this feature
+/// would be enabled as per its PCI specification based on the device capabilities.
+/// Below is it data type and the macro definitions which the driver uses for
+/// interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_ASPM_SUPPORT;
+
+#define EFI_PCI_CONF_ASPM_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_ASPM_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_CONF_ASPM_L0s_SUPPORT 0x02 //set to L0s state
+#define EFI_PCI_CONF_ASPM_L1_SUPPORT 0x03 //set to L1 state
+#define EFI_PCI_CONF_ASPM_L0S_L1_SUPPORT 0x04 //set to L0s and L1 state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature PCIe Device's Relax Ordering enable/disable. Refer to PCI Base
+/// Specification 4, (chapter 7.5.3.4) on how to translate the below EFI
+/// encodings as per the PCI hardware terminology. If this data member value
+/// is returned as 0 than there is no platform policy to override, this feature
+/// would be enabled as per its PCI specification based on the device capabilities.
+/// Below is it data type and the macro definitions which the driver uses for
+/// interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_RELAX_ORDER;
+
+#define EFI_PCI_CONF_RO_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_RO_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_CONF_RO_ENABLE 0x02 //set to enable state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature PCIe Device's No-Snoop enable/disable. Refer to PCI Base
+/// Specification 4, (chapter 7.5.3.4) on how to translate the below EFI
+/// encodings as per the PCI hardware terminology. If this data member value
+/// is returned as 0 than there is no platform policy to override, this feature
+/// would be enabled as per its PCI specification based on the device capabilities.
+/// Below is it data type and the macro definitions which the driver uses for
+/// interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_NO_SNOOP;
+
+#define EFI_PCI_CONF_NS_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_NS_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_CONF_NS_ENABLE 0x02 //set to enable state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature PCIe link's Clock configuration is common or discrete.
+/// Refer to PCI Base Specification 4, (chapter 7.5.3.7) on how to translate the
+/// below EFI encodings as per the PCI hardware terminology. If this data member
+/// value is returned as 0 than there is no platform policy to override, this
+/// feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_COMMON_CLOCK_CFG;
+
+#define EFI_PCI_CONF_CLK_CFG_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_CLK_CFG_ASYNCH 0x01 //set to default asynchronous clock
+#define EFI_PCI_CONF_CLK_CFG_COMMON 0x02 //set to common clock
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature PCIe link's Extended Synch enable or disable.
+/// Refer to PCI Base Specification 4, (chapter 7.5.3.7) on how to translate the
+/// below EFI encodings as per the PCI hardware terminology. If this data member
+/// value is returned as 0 than there is no platform policy to override, this
+/// feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_EXTENDED_SYNCH;
+
+#define EFI_PCI_CONF_EXT_SYNCH_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_EXT_SYNCH_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_CONF_EXT_SYNCH_ENABLE 0x02 //set to enable state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature PCIe Device's AtomicOp Requester enable or disable.
+/// Refer to PCI Base Specification 4, (chapter 7.5.3.16) on how to translate the
+/// below EFI encodings as per the PCI hardware terminology. If this data member
+/// value is returned as 0 than there is no platform policy to override, this
+/// feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_ATOMIC_OP;
+
+#define EFI_PCI_CONF_ATOMIC_OP_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_ATOMIC_OP_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_CONF_ATOMIC_OP_ENABLE 0x02 //set to enable state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature PCIe Device's LTR Mechanism enable/disable.
+/// Refer to PCI Base Specification 4, (chapter 7.5.3.16) on how to translate the
+/// below EFI encodings as per the PCI hardware terminology. If this data member
+/// value is returned as 0 than there is no platform policy to override, this
+/// feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_LTR;
+
+#define EFI_PCI_CONF_LTR_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_LTR_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_CONF_LTR_ENABLE 0x02 //set to enable state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature PCIe Device's Precision Time Measurement (PTM) enable/disable.
+/// Refer to PCI Base Specification 4, (chapter 7.5.3.16) on how to translate the
+/// below EFI encodings as per the PCI hardware terminology. If this data member
+/// value is returned as 0 than there is no platform policy to override, this
+/// feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_PTM;
+
+#define EFI_PCI_CONF_PTM_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_PTM_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_CONF_PTM_ENABLE 0x02 //set to enable state only
+#define EFI_PCI_CONF_PTM_ROOT_SEL 0x02 //set to root select & enable
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI-
+/// compliant feature PCIe Device's Completion Timeout (CTO) set to supported ranges
+/// or disable. Refer to PCI Base Specification 4, (chapter 7.5.3.16) on how to
+/// translate the below EFI encodings as per the PCI hardware terminology. If this
+/// data member value is returned as 0 than there is no platform policy to override,
+/// this feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_CONF_CTO_SUPPORT;
+
+#define EFI_PCI_CONF_CTO_AUTO 0x00 //No request for override
+#define EFI_PCI_CONF_CTO_DEFAULT 0x01 //set to default range of 5us to 50ms if applicable
+#define EFI_PCI_CONF_CTO_RANGE_A1 0x02 //set to range of 50us to 100us if applicable
+#define EFI_PCI_CONF_CTO_RANGE_A2 0x03 //set to range of 1ms to 10ms if applicable
+#define EFI_PCI_CONF_CTO_RANGE_B1 0x04 //set to range of 16ms to 55ms if applicable
+#define EFI_PCI_CONF_CTO_RANGE_B2 0x05 //set to range of 65ms to 210ms if applicable
+#define EFI_PCI_CONF_CTO_RANGE_C1 0x06 //set to range of 260ms to 900ms if applicable
+#define EFI_PCI_CONF_CTO_RANGE_C2 0x07 //set to range of 1s to 3.5s if applicable
+#define EFI_PCI_CONF_CTO_RANGE_D1 0x08 //set to range of 4s to 13s if applicable
+#define EFI_PCI_CONF_CTO_RANGE_D2 0x09 //set to range of 17s to 64s if applicable
+#define EFI_PCI_CONF_CTO_DET_DISABLE 0x10 //set to CTO detection disable if applicable
+
+///
+/// Reserves for future use
+///
+typedef UINT8 EFI_PCI_CONF_RESERVES;
+
+///
+/// The EFI_PCI_PLATYFORM_EXTENDED_POLICY is altogether 128-byte size, with each
+/// byte field representing one PCI standerd feature defined in the PCI Express Base
+/// Specification 4.0, version 1.0.
+///
+typedef struct {
+ EFI_PCI_CONF_MAX_PAYLOAD_SIZE DeviceCtlMPS;
+ EFI_PCI_CONF_MAX_READ_REQ_SIZE DeviceCtlMRRS;
+ EFI_PCI_CONF_EXTENDED_TAG DeviceCtlExtTag;
+ EFI_PCI_CONF_RELAX_ORDER DeviceCtlRelaxOrder;
+ EFI_PCI_CONF_NO_SNOOP DeviceCtlNoSnoop;
+ EFI_PCI_CONF_ASPM_SUPPORT LinkCtlASPMState;
+ EFI_PCI_CONF_COMMON_CLOCK_CFG LinkCtlCommonClkCfg;
+ EFI_PCI_CONF_EXTENDED_SYNCH LinkCtlExtSynch;
+ EFI_PCI_CONF_ATOMIC_OP DeviceCtl2AtomicOp;
+ EFI_PCI_CONF_LTR DeviceCtl2LTR;
+ EFI_PCI_CONF_PTM PTMControl;
+ EFI_PCI_CONF_CTO_SUPPORT CTOsupport;
+ EFI_PCI_CONF_RESERVES Reserves[116];
+} EFI_PCI_PLATFORM_EXTENDED_POLICY;
+
+/**
+ The notification from the PCI bus enumerator to the platform that it is
+ about to enter a certain phase during the enumeration process.
+
+ The PlatformNotify() function can be used to notify the platform driver so that
+ it can perform platform-specific actions. No specific actions are required.
+ Eight notification points are defined at this time. More synchronization points
+ may be added as required in the future. The PCI bus driver calls the platform driver
+ twice for every Phase-once before the PCI Host Bridge Resource Allocation Protocol
+ driver is notified, and once after the PCI Host Bridge Resource Allocation Protocol
+ driver has been notified.
+ This member function may not perform any error checking on the input parameters. It
+ also does not return any error codes. If this member function detects any error condition,
+ it needs to handle those errors on its own because there is no way to surface any
+ errors to the caller.
+
+ @param[in] This The pointer to the EFI_PCI_PLATFORM_PROTOCOL2 instance.
+ @param[in] HostBridge The handle of the host bridge controller.
+ @param[in] Phase The phase of the PCI bus enumeration.
+ @param[in] ExecPhase Defines the execution phase of the PCI chipset driver.
+
+ @retval EFI_SUCCESS The function completed successfully.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_PLATFORM_PHASE_NOTIFY2)(
+ IN EFI_PCI_PLATFORM_PROTOCOL2 *This,
+ IN EFI_HANDLE HostBridge,
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase,
+ IN EFI_PCI_EXECUTION_PHASE ExecPhase
+ );
+
+/**
+ The notification from the PCI bus enumerator to the platform for each PCI
+ controller at several predefined points during PCI controller initialization.
+
+ The PlatformPrepController() function can be used to notify the platform driver so that
+ it can perform platform-specific actions. No specific actions are required.
+ Several notification points are defined at this time. More synchronization points may be
+ added as required in the future. The PCI bus driver calls the platform driver twice for
+ every PCI controller-once before the PCI Host Bridge Resource Allocation Protocol driver
+ is notified, and once after the PCI Host Bridge Resource Allocation Protocol driver has
+ been notified.
+ This member function may not perform any error checking on the input parameters. It also
+ does not return any error codes. If this member function detects any error condition, it
+ needs to handle those errors on its own because there is no way to surface any errors to
+ the caller.
+
+ @param[in] This The pointer to the EFI_PCI_PLATFORM_PROTOCOL2 instance.
+ @param[in] HostBridge The associated PCI host bridge handle.
+ @param[in] RootBridge The associated PCI root bridge handle.
+ @param[in] PciAddress The address of the PCI device on the PCI bus.
+ @param[in] Phase The phase of the PCI controller enumeration.
+ @param[in] ExecPhase Defines the execution phase of the PCI chipset driver.
+
+ @retval EFI_SUCCESS The function completed successfully.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_PLATFORM_PREPROCESS_CONTROLLER2)(
+ IN EFI_PCI_PLATFORM_PROTOCOL2 *This,
+ IN EFI_HANDLE HostBridge,
+ IN EFI_HANDLE RootBridge,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
+ IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase,
+ IN EFI_PCI_EXECUTION_PHASE ExecPhase
+ );
+
+/**
+ Retrieves the platform policy regarding enumeration.
+
+ The GetPlatformPolicy() function retrieves the platform policy regarding PCI
+ enumeration. The PCI bus driver and the PCI Host Bridge Resource Allocation Protocol
+ driver can call this member function to retrieve the policy.
+
+ @param[in] This The pointer to the EFI_PCI_PLATFORM_PROTOCOL2 instance.
+ @param[out] PciPolicy The platform policy with respect to VGA and ISA aliasing.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_INVALID_PARAMETER PciPolicy is NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_PLATFORM_GET_PLATFORM_POLICY2)(
+ IN CONST EFI_PCI_PLATFORM_PROTOCOL2 *This,
+ OUT EFI_PCI_PLATFORM_POLICY *PciPolicy
+ );
+
+/**
+ Gets the PCI device's option ROM from a platform-specific location.
+
+ The GetPciRom() function gets the PCI device's option ROM from a platform-specific location.
+ The option ROM will be loaded into memory. This member function is used to return an image
+ that is packaged as a PCI 2.2 option ROM. The image may contain both legacy and EFI option
+ ROMs. See the UEFI 2.0 Specification for details. This member function can be used to return
+ option ROM images for embedded controllers. Option ROMs for embedded controllers are typically
+ stored in platform-specific storage, and this member function can retrieve it from that storage
+ and return it to the PCI bus driver. The PCI bus driver will call this member function before
+ scanning the ROM that is attached to any controller, which allows a platform to specify a ROM
+ image that is different from the ROM image on a PCI card.
+
+ @param[in] This The pointer to the EFI_PCI_PLATFORM_PROTOCOL2 instance.
+ @param[in] PciHandle The handle of the PCI device.
+ @param[out] RomImage If the call succeeds, the pointer to the pointer to the option ROM image.
+ Otherwise, this field is undefined. The memory for RomImage is allocated
+ by EFI_PCI_PLATFORM_PROTOCOL2.GetPciRom() using the EFI Boot Service AllocatePool().
+ It is the caller's responsibility to free the memory using the EFI Boot Service
+ FreePool(), when the caller is done with the option ROM.
+ @param[out] RomSize If the call succeeds, a pointer to the size of the option ROM size. Otherwise,
+ this field is undefined.
+
+ @retval EFI_SUCCESS The option ROM was available for this device and loaded into memory.
+ @retval EFI_NOT_FOUND No option ROM was available for this device.
+ @retval EFI_OUT_OF_RESOURCES No memory was available to load the option ROM.
+ @retval EFI_DEVICE_ERROR An error occurred in obtaining the option ROM.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_PLATFORM_GET_PCI_ROM2)(
+ IN CONST EFI_PCI_PLATFORM_PROTOCOL2 *This,
+ IN EFI_HANDLE PciHandle,
+ OUT VOID **RomImage,
+ OUT UINTN *RomSize
+ );
+
+/**
+ Retrieves the PCI device-specific platform policy regarding enumeration.
+
+ The PCI Bus driver and PCI Host Bridge Resource Allocation Protocol drivers
+ can call this member function to retrieve the platform policies specific to
+ PCI device, regarding the PCI enumeration.
+
+ The GetDevicePolicy() function retrieves the platform policy for a particular
+ component regarding PCI enumeration. The PCI bus driver and the PCI Host Bridge
+ Resource Allocation Protocol driver can call this member function to retrieve
+ the policy.
+ The existing GetPlatformPolicy() member function is used by the PCI Bus driver
+ to program the legacy ranges, the data that is returned by that member function
+ determines the supported attributes that are returned by the
+ EFI_PCI_IO_PROTOCOL.Attributes() function.
+ The GetDevicePolicy() member function is meant to return data about other PCI
+ compliant features which would be supported by the PCI Bus driver in future;
+ like for example the MPS, MRRS, Extended Tag, ASPM, etc. The details about
+ this PCI features can be obtained from the PCI Base Specification 4.x. The
+ EFI encodings for these feature are defined in the
+ EFI_PCI_PLATFORM_EXTENDED_POLICY, see the Related Definition section for this.
+ This member function will use the associated EFI handle of the PCI IO Protocol
+ to determine the physical PCI device within the chipset, to return its
+ device-specific platform policies. It is caller's responsibility to allocate
+ the buffer and pass its pointer to this member function, to get its device-
+ specific policy data.
+
+ @param[in] This Pointer to the EFI_PCI_PLATFORM_PROTOCOL2 instance.
+ @param[in] PciDevice The associated PCI IO Protocol handle of the PCI
+ device. Type EFI_HANDLE is defined in
+ InstallProtocolInterface() in the UEFI 2.1
+ Specification
+ @param[in] PciExtPolicy The pointer to platform policy with respect to other
+ PCI features like, the MPS, MRRS, etc. Type
+ EFI_PCI_PLATFORM_EXTENDED_POLICY is defined in
+ "Related Definitions" above.
+
+
+ @retval EFI_SUCCESS The function completed successfully, may returns
+ platform policy data for the given PCI component
+ @retval EFI_UNSUPPORTED PCI component belongs to PCI topology but not
+ part of chipset to provide the platform policy
+ @retval EFI_INVALID_PARAMETER If any of the input parameters are passed with
+ invalid data
+
+ **/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_PCI_PLATFORM_GET_DEVICE_POLICY) (
+ IN CONST EFI_PCI_PLATFORM_PROTOCOL2 *This,
+ IN EFI_HANDLE PciDevice,
+ OUT EFI_PCI_PLATFORM_EXTENDED_POLICY *PciExtPolicy
+);
+
+///
+/// This protocol provides the interface between the PCI bus driver/PCI Host
+/// Bridge Resource Allocation driver and a platform-specific driver to describe
+/// the unique features of a platform.
+///
+struct _EFI_PCI_PLATFORM_PROTOCOL2 {
+ ///
+ /// The notification from the PCI bus enumerator to the platform that it is about to
+ /// enter a certain phase during the enumeration process.
+ ///
+ EFI_PCI_PLATFORM_PHASE_NOTIFY2 PlatformNotify;
+ ///
+ /// The notification from the PCI bus enumerator to the platform for each PCI
+ /// controller at several predefined points during PCI controller initialization.
+ ///
+ EFI_PCI_PLATFORM_PREPROCESS_CONTROLLER2 PlatformPrepController;
+ ///
+ /// Retrieves the platform policy regarding enumeration.
+ ///
+ EFI_PCI_PLATFORM_GET_PLATFORM_POLICY2 GetPlatformPolicy;
+ ///
+ /// Gets the PCI device's option ROM from a platform-specific location.
+ ///
+ EFI_PCI_PLATFORM_GET_PCI_ROM2 GetPciRom;
+ ///
+ /// Retrieves the PCI device-specific platform policy regarding enumeration.
+ ///
+ EFI_PCI_PLATFORM_GET_DEVICE_POLICY GetDevicePolicy;
+ ///
+ /// The major version of this PCI Platform Protocol
+ ///
+ UINT8 MajorVersion;
+ ///
+ /// The minor version of this PCI Platform Protocol
+ ///
+ UINT8 MinorVersion;
+
+};
+
+extern EFI_GUID gEfiPciPlatformProtocol2Guid;
+
+#endif
diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec
index d022cc5e3e..78180db6d2 100644
--- a/MdePkg/MdePkg.dec
+++ b/MdePkg/MdePkg.dec
@@ -1022,6 +1022,12 @@
## Include/Protocol/PciOverride.h
gEfiPciOverrideProtocolGuid = { 0xb5b35764, 0x460c, 0x4a06, {0x99, 0xfc, 0x77, 0xa1, 0x7c, 0x1b, 0x5c, 0xeb }}
+ ## Include/Protocol/PciPlatform2.h
+ gEfiPciPlatformProtocol2Guid = { 0x787b0367, 0xa945, 0x4d60, { 0x8d, 0x34, 0xb9, 0xd1, 0x88, 0xd2, 0xd0, 0xb6 }}
+
+ ## Include/Protocol/PciOverride2.h
+ gEfiPciOverrideProtocol2Guid = { 0xb9d5ea1, 0x66cb, 0x4546, { 0xb0, 0xbb, 0x5c, 0x6d, 0xae, 0xd9, 0x42, 0x47 }}
+
## Include/Protocol/PciEnumerationComplete.h
gEfiPciEnumerationCompleteProtocolGuid = { 0x30cfe3e7, 0x3de1, 0x4586, {0xbe, 0x20, 0xde, 0xab, 0xa1, 0xb3, 0xb7, 0x93}}
--
2.21.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#49189): https://edk2.groups.io/g/devel/message/49189
Mute This Topic: https://groups.io/mt/34710333/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
© 2016 - 2024 Red Hat, Inc.