Allow users to set a custom CPU frequency [100 - 1600 MHz]
in 'Device Manager' -> 'Raspberry Pi Configuration'.
Signed-off-by: Pete Batard <pete@akeo.ie>
---
Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c | 13 +++++++++++-
Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf | 1 +
Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni | 4 ++++
Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr | 22 ++++++++++++++++++++
Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 4 +++-
Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h | 3 ++-
Platform/RaspberryPi/RPi3/RPi3.dec | 17 ++++++++-------
Platform/RaspberryPi/RPi3/RPi3.dsc | 1 +
8 files changed, 54 insertions(+), 11 deletions(-)
diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
index d64e70adce36..fcb4ce6935b6 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
+++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
@@ -108,6 +108,14 @@ SetupVariables (
PcdSet32 (PcdCpuClock, PcdGet32 (PcdCpuClock));
}
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"CustomCpuClock",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdCustomCpuClock, PcdGet32 (PcdCustomCpuClock));
+ }
+
Size = sizeof (UINT32);
Status = gRT->GetVariable (L"SdIsArasan",
&gConfigDxeFormSetGuid,
@@ -201,6 +209,7 @@ ApplyVariables (
UINTN Gpio48Group;
EFI_STATUS Status;
UINT32 CpuClock = PcdGet32 (PcdCpuClock);
+ UINT32 CustomCpuClock = PcdGet32 (PcdCustomCpuClock);
UINT32 Rate = 0;
if (CpuClock != 0) {
@@ -213,6 +222,8 @@ ApplyVariables (
if (Status != EFI_SUCCESS) {
DEBUG ((DEBUG_ERROR, "Couldn't get the max CPU speed, leaving as is: %r\n", Status));
}
+ } else if (CpuClock == 3) {
+ Rate = CustomCpuClock * 1000000;
} else {
Rate = 600 * 1000000;
}
@@ -220,7 +231,7 @@ ApplyVariables (
if (Rate != 0) {
DEBUG ((DEBUG_INFO, "Setting CPU speed to %uHz\n", Rate));
- Status = mFwProtocol->SetClockRate (RPI_MBOX_CLOCK_RATE_ARM, Rate);
+ Status = mFwProtocol->SetClockRate (RPI_MBOX_CLOCK_RATE_ARM, Rate, 1);
if (Status != EFI_SUCCESS) {
DEBUG ((DEBUG_ERROR, "Couldn't set the CPU speed: %r\n", Status));
}
diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
index 3fee190ac41b..6d6c90b78408 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
+++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
@@ -54,6 +54,7 @@ [Protocols]
[Pcd]
gRaspberryPiTokenSpaceGuid.PcdCpuClock
+ gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock
gRaspberryPiTokenSpaceGuid.PcdSdIsArasan
gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit
gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed
diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
index a9c101433008..04f735949ba5 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
+++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
@@ -25,6 +25,10 @@
#string STR_CHIPSET_CLOCK_CPU_NA #language en-US "Don't Override"
#string STR_CHIPSET_CLOCK_CPU_600MHZ #language en-US "Min (600MHz)"
#string STR_CHIPSET_CLOCK_CPU_MAX #language en-US "Max"
+#string STR_CHIPSET_CLOCK_CPU_CUSTOM #language en-US "Custom"
+
+#string STR_CHIPSET_CUSTOM_CPU_CLOCK_PROMPT #language en-US "CPU Clock Rate (MHz)"
+#string STR_CHIPSET_CUSTOM_CPU_CLOCK_HELP #language en-US "Adjust the CPU speed.\nMin value: 100 MHz\nMax value: 1600 MHz\n\nWarning: Overclocking can make the system unbootable!"
#string STR_CHIPSET_SD_PROMPT #language en-US "uSD Routing"
#string STR_CHIPSET_SD_HELP #language en-US "Choose host controller to drive uSD slot"
diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
index 7a1824525892..217a285b5a1f 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
+++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
@@ -47,10 +47,15 @@ typedef struct {
* 0 - don't change the clock rate.
* 1 - 600MHz.
* 2 - maximum.
+ * 3 - custom.
*/
UINT32 Clock;
} CHIPSET_CPU_CLOCK_VARSTORE_DATA;
+typedef struct {
+ UINT32 Clock;
+} CHIPSET_CUSTOM_CPU_CLOCK_VARSTORE_DATA;
+
typedef struct {
/*
* 0 - uSD slot routed to Broadcom SDHOST.
@@ -116,6 +121,11 @@ formset
name = CpuClock,
guid = CONFIGDXE_FORM_SET_GUID;
+ efivarstore CHIPSET_CUSTOM_CPU_CLOCK_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = CustomCpuClock,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
efivarstore CHIPSET_SD_VARSTORE_DATA,
attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
name = SdIsArasan,
@@ -198,8 +208,20 @@ formset
option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_NA), value = 0, flags = DEFAULT;
option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_600MHZ), value = 1, flags = 0;
option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_MAX), value = 2, flags = 0;
+ option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_CUSTOM), value = 3, flags = 0;
endoneof;
+ grayoutif NOT ideqval CpuClock.Clock == 3;
+ numeric varid = CustomCpuClock.Clock,
+ prompt = STRING_TOKEN(STR_CHIPSET_CUSTOM_CPU_CLOCK_PROMPT),
+ help = STRING_TOKEN(STR_CHIPSET_CUSTOM_CPU_CLOCK_HELP),
+ flags = DISPLAY_UINT_DEC | NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ minimum = 100,
+ maximum = 1600,
+ default = 600,
+ endnumeric;
+ endif;
+
oneof varid = SdIsArasan.Routing,
prompt = STRING_TOKEN(STR_CHIPSET_SD_PROMPT),
help = STRING_TOKEN(STR_CHIPSET_SD_HELP),
diff --git a/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
index 925f5a921290..5d96c0d84181 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
+++ b/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
@@ -800,7 +800,8 @@ EFI_STATUS
EFIAPI
RpiFirmwareSetClockRate (
IN UINT32 ClockId,
- IN UINT32 ClockRate
+ IN UINT32 ClockRate,
+ IN UINT32 SkipTurbo
)
{
RPI_FW_SET_CLOCK_RATE_CMD *Cmd;
@@ -822,6 +823,7 @@ RpiFirmwareSetClockRate (
Cmd->TagHead.TagValueSize = 0;
Cmd->TagBody.ClockId = ClockId;
Cmd->TagBody.ClockRate = ClockRate;
+ Cmd->TagBody.SkipTurbo = SkipTurbo;
Cmd->EndTag = 0;
Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
diff --git a/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h b/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
index f3e3d1e99eba..cc4e2786e653 100644
--- a/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
+++ b/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
@@ -44,7 +44,8 @@ typedef
EFI_STATUS
(EFIAPI *SET_CLOCK_RATE) (
IN UINT32 ClockId,
- OUT UINT32 ClockRate
+ OUT UINT32 ClockRate,
+ IN UINT32 SkipTurbo
);
typedef
diff --git a/Platform/RaspberryPi/RPi3/RPi3.dec b/Platform/RaspberryPi/RPi3/RPi3.dec
index ab3788237861..56eac262502e 100644
--- a/Platform/RaspberryPi/RPi3/RPi3.dec
+++ b/Platform/RaspberryPi/RPi3/RPi3.dec
@@ -39,13 +39,14 @@ [PcdsFixedAtBuild.common]
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
gRaspberryPiTokenSpaceGuid.PcdCpuClock|0|UINT32|0x0000000d
- gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|0|UINT32|0x0000000e
- gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|0|UINT32|0x0000000f
- gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|0|UINT32|0x00000010
- gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|0|UINT32|0x00000011
- gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz|0|UINT32|0x00000012
- gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti|0|UINT32|0x00000013
- gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG|0|UINT32|0x00000014
- gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit|0|UINT32|0x00000015
+ gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock|0|UINT32|0x0000000e
+ gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|0|UINT32|0x0000000f
+ gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|0|UINT32|0x00000010
+ gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|0|UINT32|0x00000011
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|0|UINT32|0x00000012
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz|0|UINT32|0x00000013
+ gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti|0|UINT32|0x00000014
+ gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG|0|UINT32|0x00000015
+ gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit|0|UINT32|0x00000016
gRaspberryPiTokenSpaceGuid.PcdDisplayEnableVModes|0|UINT32|0x00000017
gRaspberryPiTokenSpaceGuid.PcdDisplayEnableSShot|0|UINT32|0x00000018
diff --git a/Platform/RaspberryPi/RPi3/RPi3.dsc b/Platform/RaspberryPi/RPi3/RPi3.dsc
index ad8fb03ab305..2b9e619ad55c 100644
--- a/Platform/RaspberryPi/RPi3/RPi3.dsc
+++ b/Platform/RaspberryPi/RPi3/RPi3.dsc
@@ -393,6 +393,7 @@ [PcdsDynamicHii.common.DEFAULT]
#
gRaspberryPiTokenSpaceGuid.PcdCpuClock|L"CpuClock"|gConfigDxeFormSetGuid|0x0|0
+ gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock|L"CustomCpuClock"|gConfigDxeFormSetGuid|0x0|600
#
# SD-related.
--
2.21.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#43173): https://edk2.groups.io/g/devel/message/43173
Mute This Topic: https://groups.io/mt/32287843/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
On Tue, Jul 02, 2019 at 05:13:41PM +0100, Pete Batard wrote:
> Allow users to set a custom CPU frequency [100 - 1600 MHz]
> in 'Device Manager' -> 'Raspberry Pi Configuration'.
>
> Signed-off-by: Pete Batard <pete@akeo.ie>
> ---
> Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c | 13 +++++++++++-
> Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf | 1 +
> Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni | 4 ++++
> Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr | 22 ++++++++++++++++++++
> Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 4 +++-
> Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h | 3 ++-
> Platform/RaspberryPi/RPi3/RPi3.dec | 17 ++++++++-------
> Platform/RaspberryPi/RPi3/RPi3.dsc | 1 +
> 8 files changed, 54 insertions(+), 11 deletions(-)
>
> diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
> index d64e70adce36..fcb4ce6935b6 100644
> --- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
> +++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
> @@ -108,6 +108,14 @@ SetupVariables (
> PcdSet32 (PcdCpuClock, PcdGet32 (PcdCpuClock));
> }
>
> + Size = sizeof (UINT32);
> + Status = gRT->GetVariable(L"CustomCpuClock",
> + &gConfigDxeFormSetGuid,
> + NULL, &Size, &Var32);
> + if (EFI_ERROR (Status)) {
> + PcdSet32 (PcdCustomCpuClock, PcdGet32 (PcdCustomCpuClock));
> + }
> +
> Size = sizeof (UINT32);
> Status = gRT->GetVariable (L"SdIsArasan",
> &gConfigDxeFormSetGuid,
> @@ -201,6 +209,7 @@ ApplyVariables (
> UINTN Gpio48Group;
> EFI_STATUS Status;
> UINT32 CpuClock = PcdGet32 (PcdCpuClock);
> + UINT32 CustomCpuClock = PcdGet32 (PcdCustomCpuClock);
> UINT32 Rate = 0;
>
> if (CpuClock != 0) {
> @@ -213,6 +222,8 @@ ApplyVariables (
> if (Status != EFI_SUCCESS) {
> DEBUG ((DEBUG_ERROR, "Couldn't get the max CPU speed, leaving as is: %r\n", Status));
> }
> + } else if (CpuClock == 3) {
> + Rate = CustomCpuClock * 1000000;
> } else {
> Rate = 600 * 1000000;
> }
> @@ -220,7 +231,7 @@ ApplyVariables (
>
> if (Rate != 0) {
> DEBUG ((DEBUG_INFO, "Setting CPU speed to %uHz\n", Rate));
> - Status = mFwProtocol->SetClockRate (RPI_MBOX_CLOCK_RATE_ARM, Rate);
> + Status = mFwProtocol->SetClockRate (RPI_MBOX_CLOCK_RATE_ARM, Rate, 1);
> if (Status != EFI_SUCCESS) {
> DEBUG ((DEBUG_ERROR, "Couldn't set the CPU speed: %r\n", Status));
> }
> diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
> index 3fee190ac41b..6d6c90b78408 100644
> --- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
> +++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
> @@ -54,6 +54,7 @@ [Protocols]
>
> [Pcd]
> gRaspberryPiTokenSpaceGuid.PcdCpuClock
> + gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock
> gRaspberryPiTokenSpaceGuid.PcdSdIsArasan
> gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit
> gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed
> diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
> index a9c101433008..04f735949ba5 100644
> --- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
> +++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
> @@ -25,6 +25,10 @@
> #string STR_CHIPSET_CLOCK_CPU_NA #language en-US "Don't Override"
> #string STR_CHIPSET_CLOCK_CPU_600MHZ #language en-US "Min (600MHz)"
> #string STR_CHIPSET_CLOCK_CPU_MAX #language en-US "Max"
> +#string STR_CHIPSET_CLOCK_CPU_CUSTOM #language en-US "Custom"
> +
> +#string STR_CHIPSET_CUSTOM_CPU_CLOCK_PROMPT #language en-US "CPU Clock Rate (MHz)"
> +#string STR_CHIPSET_CUSTOM_CPU_CLOCK_HELP #language en-US "Adjust the CPU speed.\nMin value: 100 MHz\nMax value: 1600 MHz\n\nWarning: Overclocking can make the system unbootable!"
>
> #string STR_CHIPSET_SD_PROMPT #language en-US "uSD Routing"
> #string STR_CHIPSET_SD_HELP #language en-US "Choose host controller to drive uSD slot"
> diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
> index 7a1824525892..217a285b5a1f 100644
> --- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
> +++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
> @@ -47,10 +47,15 @@ typedef struct {
> * 0 - don't change the clock rate.
> * 1 - 600MHz.
> * 2 - maximum.
> + * 3 - custom.
> */
> UINT32 Clock;
> } CHIPSET_CPU_CLOCK_VARSTORE_DATA;
>
> +typedef struct {
> + UINT32 Clock;
> +} CHIPSET_CUSTOM_CPU_CLOCK_VARSTORE_DATA;
> +
> typedef struct {
> /*
> * 0 - uSD slot routed to Broadcom SDHOST.
> @@ -116,6 +121,11 @@ formset
> name = CpuClock,
> guid = CONFIGDXE_FORM_SET_GUID;
>
> + efivarstore CHIPSET_CUSTOM_CPU_CLOCK_VARSTORE_DATA,
> + attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
Is the runtime access intentional? Are we expecting users to change
the (post reboot) frequency from within the operating system?
> + name = CustomCpuClock,
> + guid = CONFIGDXE_FORM_SET_GUID;
> +
> efivarstore CHIPSET_SD_VARSTORE_DATA,
> attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
> name = SdIsArasan,
> @@ -198,8 +208,20 @@ formset
> option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_NA), value = 0, flags = DEFAULT;
> option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_600MHZ), value = 1, flags = 0;
> option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_MAX), value = 2, flags = 0;
> + option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_CUSTOM), value = 3, flags = 0;
> endoneof;
>
> + grayoutif NOT ideqval CpuClock.Clock == 3;
> + numeric varid = CustomCpuClock.Clock,
> + prompt = STRING_TOKEN(STR_CHIPSET_CUSTOM_CPU_CLOCK_PROMPT),
> + help = STRING_TOKEN(STR_CHIPSET_CUSTOM_CPU_CLOCK_HELP),
> + flags = DISPLAY_UINT_DEC | NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
> + minimum = 100,
> + maximum = 1600,
> + default = 600,
> + endnumeric;
> + endif;
> +
> oneof varid = SdIsArasan.Routing,
> prompt = STRING_TOKEN(STR_CHIPSET_SD_PROMPT),
> help = STRING_TOKEN(STR_CHIPSET_SD_HELP),
> diff --git a/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
> index 925f5a921290..5d96c0d84181 100644
> --- a/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
> +++ b/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
> @@ -800,7 +800,8 @@ EFI_STATUS
> EFIAPI
> RpiFirmwareSetClockRate (
> IN UINT32 ClockId,
> - IN UINT32 ClockRate
> + IN UINT32 ClockRate,
> + IN UINT32 SkipTurbo
> )
> {
> RPI_FW_SET_CLOCK_RATE_CMD *Cmd;
> @@ -822,6 +823,7 @@ RpiFirmwareSetClockRate (
> Cmd->TagHead.TagValueSize = 0;
> Cmd->TagBody.ClockId = ClockId;
> Cmd->TagBody.ClockRate = ClockRate;
> + Cmd->TagBody.SkipTurbo = SkipTurbo;
I guess this is defined in some protocol defined somewhere to be a
32-bit value, since the struct is already defined before this set.
However, from the EDK2 API side, it doesn't really make sense - could
you change the function parameter to BOOL and the callers to use
TRUE/FALSE instead of 1/0?
> Cmd->EndTag = 0;
>
> Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
> diff --git a/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h b/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
> index f3e3d1e99eba..cc4e2786e653 100644
> --- a/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
> +++ b/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
> @@ -44,7 +44,8 @@ typedef
> EFI_STATUS
> (EFIAPI *SET_CLOCK_RATE) (
> IN UINT32 ClockId,
> - OUT UINT32 ClockRate
> + OUT UINT32 ClockRate,
> + IN UINT32 SkipTurbo
> );
>
> typedef
> diff --git a/Platform/RaspberryPi/RPi3/RPi3.dec b/Platform/RaspberryPi/RPi3/RPi3.dec
> index ab3788237861..56eac262502e 100644
> --- a/Platform/RaspberryPi/RPi3/RPi3.dec
> +++ b/Platform/RaspberryPi/RPi3/RPi3.dec
> @@ -39,13 +39,14 @@ [PcdsFixedAtBuild.common]
>
> [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
> gRaspberryPiTokenSpaceGuid.PcdCpuClock|0|UINT32|0x0000000d
> - gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|0|UINT32|0x0000000e
> - gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|0|UINT32|0x0000000f
> - gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|0|UINT32|0x00000010
> - gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|0|UINT32|0x00000011
> - gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz|0|UINT32|0x00000012
> - gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti|0|UINT32|0x00000013
> - gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG|0|UINT32|0x00000014
> - gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit|0|UINT32|0x00000015
> + gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock|0|UINT32|0x0000000e
> + gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|0|UINT32|0x0000000f
> + gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|0|UINT32|0x00000010
> + gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|0|UINT32|0x00000011
> + gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|0|UINT32|0x00000012
> + gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz|0|UINT32|0x00000013
> + gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti|0|UINT32|0x00000014
> + gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG|0|UINT32|0x00000015
> + gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit|0|UINT32|0x00000016
Ouch.
I think I would rather have the token ids, or the Pcds, out of order than
reindexing them when we add a new one. The tool will warn you about duplicates.
/
Leif
> gRaspberryPiTokenSpaceGuid.PcdDisplayEnableVModes|0|UINT32|0x00000017
> gRaspberryPiTokenSpaceGuid.PcdDisplayEnableSShot|0|UINT32|0x00000018
> diff --git a/Platform/RaspberryPi/RPi3/RPi3.dsc b/Platform/RaspberryPi/RPi3/RPi3.dsc
> index ad8fb03ab305..2b9e619ad55c 100644
> --- a/Platform/RaspberryPi/RPi3/RPi3.dsc
> +++ b/Platform/RaspberryPi/RPi3/RPi3.dsc
> @@ -393,6 +393,7 @@ [PcdsDynamicHii.common.DEFAULT]
> #
>
> gRaspberryPiTokenSpaceGuid.PcdCpuClock|L"CpuClock"|gConfigDxeFormSetGuid|0x0|0
> + gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock|L"CustomCpuClock"|gConfigDxeFormSetGuid|0x0|600
>
> #
> # SD-related.
> --
> 2.21.0.windows.1
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#43214): https://edk2.groups.io/g/devel/message/43214
Mute This Topic: https://groups.io/mt/32287843/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
Hi Leif,
On 2019.07.03 12:42, Leif Lindholm wrote:
> On Tue, Jul 02, 2019 at 05:13:41PM +0100, Pete Batard wrote:
>> Allow users to set a custom CPU frequency [100 - 1600 MHz]
>> in 'Device Manager' -> 'Raspberry Pi Configuration'.
>>
>> Signed-off-by: Pete Batard <pete@akeo.ie>
>> ---
>> Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c | 13 +++++++++++-
>> Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf | 1 +
>> Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni | 4 ++++
>> Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr | 22 ++++++++++++++++++++
>> Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 4 +++-
>> Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h | 3 ++-
>> Platform/RaspberryPi/RPi3/RPi3.dec | 17 ++++++++-------
>> Platform/RaspberryPi/RPi3/RPi3.dsc | 1 +
>> 8 files changed, 54 insertions(+), 11 deletions(-)
>>
>> diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
>> index d64e70adce36..fcb4ce6935b6 100644
>> --- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
>> +++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
>> @@ -108,6 +108,14 @@ SetupVariables (
>> PcdSet32 (PcdCpuClock, PcdGet32 (PcdCpuClock));
>> }
>>
>> + Size = sizeof (UINT32);
>> + Status = gRT->GetVariable(L"CustomCpuClock",
>> + &gConfigDxeFormSetGuid,
>> + NULL, &Size, &Var32);
>> + if (EFI_ERROR (Status)) {
>> + PcdSet32 (PcdCustomCpuClock, PcdGet32 (PcdCustomCpuClock));
>> + }
>> +
>> Size = sizeof (UINT32);
>> Status = gRT->GetVariable (L"SdIsArasan",
>> &gConfigDxeFormSetGuid,
>> @@ -201,6 +209,7 @@ ApplyVariables (
>> UINTN Gpio48Group;
>> EFI_STATUS Status;
>> UINT32 CpuClock = PcdGet32 (PcdCpuClock);
>> + UINT32 CustomCpuClock = PcdGet32 (PcdCustomCpuClock);
>> UINT32 Rate = 0;
>>
>> if (CpuClock != 0) {
>> @@ -213,6 +222,8 @@ ApplyVariables (
>> if (Status != EFI_SUCCESS) {
>> DEBUG ((DEBUG_ERROR, "Couldn't get the max CPU speed, leaving as is: %r\n", Status));
>> }
>> + } else if (CpuClock == 3) {
>> + Rate = CustomCpuClock * 1000000;
>> } else {
>> Rate = 600 * 1000000;
>> }
>> @@ -220,7 +231,7 @@ ApplyVariables (
>>
>> if (Rate != 0) {
>> DEBUG ((DEBUG_INFO, "Setting CPU speed to %uHz\n", Rate));
>> - Status = mFwProtocol->SetClockRate (RPI_MBOX_CLOCK_RATE_ARM, Rate);
>> + Status = mFwProtocol->SetClockRate (RPI_MBOX_CLOCK_RATE_ARM, Rate, 1);
>> if (Status != EFI_SUCCESS) {
>> DEBUG ((DEBUG_ERROR, "Couldn't set the CPU speed: %r\n", Status));
>> }
>> diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
>> index 3fee190ac41b..6d6c90b78408 100644
>> --- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
>> +++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
>> @@ -54,6 +54,7 @@ [Protocols]
>>
>> [Pcd]
>> gRaspberryPiTokenSpaceGuid.PcdCpuClock
>> + gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock
>> gRaspberryPiTokenSpaceGuid.PcdSdIsArasan
>> gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit
>> gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed
>> diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
>> index a9c101433008..04f735949ba5 100644
>> --- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
>> +++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
>> @@ -25,6 +25,10 @@
>> #string STR_CHIPSET_CLOCK_CPU_NA #language en-US "Don't Override"
>> #string STR_CHIPSET_CLOCK_CPU_600MHZ #language en-US "Min (600MHz)"
>> #string STR_CHIPSET_CLOCK_CPU_MAX #language en-US "Max"
>> +#string STR_CHIPSET_CLOCK_CPU_CUSTOM #language en-US "Custom"
>> +
>> +#string STR_CHIPSET_CUSTOM_CPU_CLOCK_PROMPT #language en-US "CPU Clock Rate (MHz)"
>> +#string STR_CHIPSET_CUSTOM_CPU_CLOCK_HELP #language en-US "Adjust the CPU speed.\nMin value: 100 MHz\nMax value: 1600 MHz\n\nWarning: Overclocking can make the system unbootable!"
>>
>> #string STR_CHIPSET_SD_PROMPT #language en-US "uSD Routing"
>> #string STR_CHIPSET_SD_HELP #language en-US "Choose host controller to drive uSD slot"
>> diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
>> index 7a1824525892..217a285b5a1f 100644
>> --- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
>> +++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
>> @@ -47,10 +47,15 @@ typedef struct {
>> * 0 - don't change the clock rate.
>> * 1 - 600MHz.
>> * 2 - maximum.
>> + * 3 - custom.
>> */
>> UINT32 Clock;
>> } CHIPSET_CPU_CLOCK_VARSTORE_DATA;
>>
>> +typedef struct {
>> + UINT32 Clock;
>> +} CHIPSET_CUSTOM_CPU_CLOCK_VARSTORE_DATA;
>> +
>> typedef struct {
>> /*
>> * 0 - uSD slot routed to Broadcom SDHOST.
>> @@ -116,6 +121,11 @@ formset
>> name = CpuClock,
>> guid = CONFIGDXE_FORM_SET_GUID;
>>
>> + efivarstore CHIPSET_CUSTOM_CPU_CLOCK_VARSTORE_DATA,
>> + attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
>
> Is the runtime access intentional? Are we expecting users to change
> the (post reboot) frequency from within the operating system?
You're right, I don't think having EFI_VARIABLE_RUNTIME_ACCESS makes
sense. Or at least, I'm not aware of any OS that would provide the
functionality to alter this custom frequency. Let me remove it.
>
>> + name = CustomCpuClock,
>> + guid = CONFIGDXE_FORM_SET_GUID;
>> +
>> efivarstore CHIPSET_SD_VARSTORE_DATA,
>> attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
>> name = SdIsArasan,
>> @@ -198,8 +208,20 @@ formset
>> option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_NA), value = 0, flags = DEFAULT;
>> option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_600MHZ), value = 1, flags = 0;
>> option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_MAX), value = 2, flags = 0;
>> + option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_CUSTOM), value = 3, flags = 0;
>> endoneof;
>>
>> + grayoutif NOT ideqval CpuClock.Clock == 3;
>> + numeric varid = CustomCpuClock.Clock,
>> + prompt = STRING_TOKEN(STR_CHIPSET_CUSTOM_CPU_CLOCK_PROMPT),
>> + help = STRING_TOKEN(STR_CHIPSET_CUSTOM_CPU_CLOCK_HELP),
>> + flags = DISPLAY_UINT_DEC | NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
>> + minimum = 100,
>> + maximum = 1600,
>> + default = 600,
>> + endnumeric;
>> + endif;
>> +
>> oneof varid = SdIsArasan.Routing,
>> prompt = STRING_TOKEN(STR_CHIPSET_SD_PROMPT),
>> help = STRING_TOKEN(STR_CHIPSET_SD_HELP),
>> diff --git a/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
>> index 925f5a921290..5d96c0d84181 100644
>> --- a/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
>> +++ b/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
>> @@ -800,7 +800,8 @@ EFI_STATUS
>> EFIAPI
>> RpiFirmwareSetClockRate (
>> IN UINT32 ClockId,
>> - IN UINT32 ClockRate
>> + IN UINT32 ClockRate,
>> + IN UINT32 SkipTurbo
>> )
>> {
>> RPI_FW_SET_CLOCK_RATE_CMD *Cmd;
>> @@ -822,6 +823,7 @@ RpiFirmwareSetClockRate (
>> Cmd->TagHead.TagValueSize = 0;
>> Cmd->TagBody.ClockId = ClockId;
>> Cmd->TagBody.ClockRate = ClockRate;
>> + Cmd->TagBody.SkipTurbo = SkipTurbo;
>
> I guess this is defined in some protocol defined somewhere to be a
> 32-bit value, since the struct is already defined before this set.
>
> However, from the EDK2 API side, it doesn't really make sense - could
> you change the function parameter to BOOL and the callers to use
> TRUE/FALSE instead of 1/0?
I'll switch to using a BOOL.
>
>> Cmd->EndTag = 0;
>>
>> Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
>> diff --git a/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h b/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
>> index f3e3d1e99eba..cc4e2786e653 100644
>> --- a/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
>> +++ b/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
>> @@ -44,7 +44,8 @@ typedef
>> EFI_STATUS
>> (EFIAPI *SET_CLOCK_RATE) (
>> IN UINT32 ClockId,
>> - OUT UINT32 ClockRate
>> + OUT UINT32 ClockRate,
>> + IN UINT32 SkipTurbo
>> );
>>
>> typedef
>> diff --git a/Platform/RaspberryPi/RPi3/RPi3.dec b/Platform/RaspberryPi/RPi3/RPi3.dec
>> index ab3788237861..56eac262502e 100644
>> --- a/Platform/RaspberryPi/RPi3/RPi3.dec
>> +++ b/Platform/RaspberryPi/RPi3/RPi3.dec
>> @@ -39,13 +39,14 @@ [PcdsFixedAtBuild.common]
>>
>> [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
>> gRaspberryPiTokenSpaceGuid.PcdCpuClock|0|UINT32|0x0000000d
>> - gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|0|UINT32|0x0000000e
>> - gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|0|UINT32|0x0000000f
>> - gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|0|UINT32|0x00000010
>> - gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|0|UINT32|0x00000011
>> - gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz|0|UINT32|0x00000012
>> - gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti|0|UINT32|0x00000013
>> - gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG|0|UINT32|0x00000014
>> - gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit|0|UINT32|0x00000015
>> + gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock|0|UINT32|0x0000000e
>> + gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|0|UINT32|0x0000000f
>> + gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|0|UINT32|0x00000010
>> + gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|0|UINT32|0x00000011
>> + gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|0|UINT32|0x00000012
>> + gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz|0|UINT32|0x00000013
>> + gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti|0|UINT32|0x00000014
>> + gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG|0|UINT32|0x00000015
>> + gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit|0|UINT32|0x00000016
>
> Ouch.
> I think I would rather have the token ids, or the Pcds, out of order than
> reindexing them when we add a new one. The tool will warn you about duplicates.
Alright then. I'll leave the existing values and only add the one we
need. I will send a v2 later that also takes into account the breaking
of the line you requested for the other patch.
Regards,
/Pete
>
> /
> Leif
>
>> gRaspberryPiTokenSpaceGuid.PcdDisplayEnableVModes|0|UINT32|0x00000017
>> gRaspberryPiTokenSpaceGuid.PcdDisplayEnableSShot|0|UINT32|0x00000018
>> diff --git a/Platform/RaspberryPi/RPi3/RPi3.dsc b/Platform/RaspberryPi/RPi3/RPi3.dsc
>> index ad8fb03ab305..2b9e619ad55c 100644
>> --- a/Platform/RaspberryPi/RPi3/RPi3.dsc
>> +++ b/Platform/RaspberryPi/RPi3/RPi3.dsc
>> @@ -393,6 +393,7 @@ [PcdsDynamicHii.common.DEFAULT]
>> #
>>
>> gRaspberryPiTokenSpaceGuid.PcdCpuClock|L"CpuClock"|gConfigDxeFormSetGuid|0x0|0
>> + gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock|L"CustomCpuClock"|gConfigDxeFormSetGuid|0x0|600
>>
>> #
>> # SD-related.
>> --
>> 2.21.0.windows.1
>>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#43216): https://edk2.groups.io/g/devel/message/43216
Mute This Topic: https://groups.io/mt/32287843/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-
© 2016 - 2026 Red Hat, Inc.