Introduces the below PPI:
struct EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
};
The GetNvmeHcMmioBar service will provide the caller with the MMIO BAR
address of each NVMe HC within the system;
The GetNvmeHcDevicePath service will provide the caller with the device
path information of each NVMe HC.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
---
MdeModulePkg/Include/Ppi/NvmExpressHostController.h | 97 ++++++++++++++++++++
MdeModulePkg/MdeModulePkg.dec | 3 +
2 files changed, 100 insertions(+)
diff --git a/MdeModulePkg/Include/Ppi/NvmExpressHostController.h b/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
new file mode 100644
index 0000000000..de9ae4a59c
--- /dev/null
+++ b/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
@@ -0,0 +1,97 @@
+/** @file
+
+ Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI_H_
+#define _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI_H_
+
+#include <Protocol/DevicePath.h>
+
+///
+/// Global ID for the EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI.
+///
+#define EDKII_NVME_EXPRESS_HOST_CONTROLLER_PPI_GUID \
+ { \
+ 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } \
+ }
+
+//
+// Forward declaration for the EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI.
+//
+typedef struct _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI;
+
+/**
+ Get the MMIO base address of NVM Express host controller.
+
+ @param[in] PeiServices Describes the list of possible PEI Services.
+ @param[in] This The PPI instance pointer.
+ @param[in] ControllerId The ID of the NVM Express host controller.
+ @param[out] MmioBar The MMIO base address of the controller.
+
+ @retval EFI_SUCCESS The operation succeeds.
+ @retval EFI_INVALID_PARAMETER The parameters are invalid.
+ @retval EFI_NOT_FOUND The specified NVM Express host controller not
+ found.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR) (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *This,
+ IN UINT8 ControllerId,
+ OUT UINTN *MmioBar
+ );
+
+/**
+ Get the device path of NVM Express host controller.
+
+ @param[in] PeiServices Describes the list of possible PEI Services.
+ @param[in] This The PPI instance pointer.
+ @param[in] ControllerId The ID of the NVM Express host controller.
+ @param[out] DevicePathLenth The length of the device path in bytes specified
+ by DevicePath.
+ @param[out] DevicePath The device path of NVM Express host controller.
+ The caller is responsible for freeing it.
+ This field re-uses EFI Device Path Protocol as
+ defined by Section 10.2 EFI Device Path Protocol
+ of UEFI 2.7 Specification.
+
+ @retval EFI_SUCCESS The operation succeeds.
+ @retval EFI_INVALID_PARAMETER The parameters are invalid.
+ @retval EFI_NOT_FOUND The specified NVM Express host controller not
+ found.
+ @retval EFI_OUT_OF_RESOURCES The operation fails due to lack of resources.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH) (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *This,
+ IN UINT8 ControllerId,
+ OUT UINTN *DevicePathLenth,
+ OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ );
+
+//
+// This PPI contains a set of services to interact with the NVM Express host
+// controller.
+//
+struct _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
+ EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
+ EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
+};
+
+extern EFI_GUID gEdkiiPeiNvmExpressHostControllerPpiGuid;
+
+#endif
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 3802b6e0b8..8d7c97ee91 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -471,6 +471,9 @@
## Include/Ppi/PlatformSpecificResetHandler.h
gEdkiiPlatformSpecificResetHandlerPpiGuid = { 0x75cf14ae, 0x3441, 0x49dc, { 0xaa, 0x10, 0xbb, 0x35, 0xa7, 0xba, 0x8b, 0xab } }
+ ## Include/Ppi/NvmExpressHostController.h
+ gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
--
2.12.0.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Thanks/Ray
> -----Original Message-----
> From: Wu, Hao A
> Sent: Friday, June 15, 2018 3:04 PM
> To: edk2-devel@lists.01.org
> Cc: Wu, Hao A <hao.a.wu@intel.com>; Zeng, Star <star.zeng@intel.com>;
> Dong, Eric <eric.dong@intel.com>; Ni, Ruiyu <ruiyu.ni@intel.com>; Yao,
> Jiewen <jiewen.yao@intel.com>
> Subject: [PATCH 1/4] MdeModulePkg: Add definitions for EDKII PEI NVME
> host controller PPI
>
> Introduces the below PPI:
>
> struct EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
> EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
> EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
> };
>
> The GetNvmeHcMmioBar service will provide the caller with the MMIO BAR
> address of each NVMe HC within the system;
>
> The GetNvmeHcDevicePath service will provide the caller with the device
> path information of each NVMe HC.
>
> Cc: Star Zeng <star.zeng@intel.com>
> Cc: Eric Dong <eric.dong@intel.com>
> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Hao Wu <hao.a.wu@intel.com>
> ---
> MdeModulePkg/Include/Ppi/NvmExpressHostController.h | 97
> ++++++++++++++++++++
> MdeModulePkg/MdeModulePkg.dec | 3 +
> 2 files changed, 100 insertions(+)
>
> diff --git a/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
> b/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
> new file mode 100644
> index 0000000000..de9ae4a59c
> --- /dev/null
> +++ b/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
> @@ -0,0 +1,97 @@
> +/** @file
> +
> + Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> This
> + program and the accompanying materials are licensed and made
> + available under the terms and conditions of the BSD License which
> + accompanies this distribution. The full text of the license may be
> + found at http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +
> +**/
> +
> +#ifndef _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI_H_
> +#define _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI_H_
> +
> +#include <Protocol/DevicePath.h>
> +
> +///
> +/// Global ID for the EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI.
> +///
> +#define EDKII_NVME_EXPRESS_HOST_CONTROLLER_PPI_GUID \
> + { \
> + 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde,
> +0x9a, 0xad } \
> + }
> +
> +//
> +// Forward declaration for the
> EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI.
> +//
> +typedef struct _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI
> +EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI;
> +
> +/**
> + Get the MMIO base address of NVM Express host controller.
> +
> + @param[in] PeiServices Describes the list of possible PEI Services.
> + @param[in] This The PPI instance pointer.
> + @param[in] ControllerId The ID of the NVM Express host controller.
> + @param[out] MmioBar The MMIO base address of the controller.
> +
> + @retval EFI_SUCCESS The operation succeeds.
> + @retval EFI_INVALID_PARAMETER The parameters are invalid.
> + @retval EFI_NOT_FOUND The specified NVM Express host controller
> not
> + found.
> +
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR) (
> + IN EFI_PEI_SERVICES **PeiServices,
1. PeiServices is not needed.
> + IN EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *This,
> + IN UINT8 ControllerId,
> + OUT UINTN *MmioBar
> + );
> +
> +/**
> + Get the device path of NVM Express host controller.
> +
> + @param[in] PeiServices Describes the list of possible PEI Services.
> + @param[in] This The PPI instance pointer.
> + @param[in] ControllerId The ID of the NVM Express host controller.
> + @param[out] DevicePathLenth The length of the device path in bytes
> specified
> + by DevicePath.
> + @param[out] DevicePath The device path of NVM Express host
> controller.
> + The caller is responsible for freeing it.
> + This field re-uses EFI Device Path Protocol as
> + defined by Section 10.2 EFI Device Path Protocol
> + of UEFI 2.7 Specification.
> +
> + @retval EFI_SUCCESS The operation succeeds.
> + @retval EFI_INVALID_PARAMETER The parameters are invalid.
> + @retval EFI_NOT_FOUND The specified NVM Express host controller
> not
> + found.
> + @retval EFI_OUT_OF_RESOURCES The operation fails due to lack of
> resources.
> +
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH) (
> + IN EFI_PEI_SERVICES **PeiServices,
> + IN EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *This,
> + IN UINT8 ControllerId,
> + OUT UINTN *DevicePathLenth,
> + OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
2. Firstly, FreePool() is not supported in PEI phase so requiring caller to free is
confusing.
Secondly, can the device path be determined at build time? If yes, then a
pointer to global variable can be returned so no need for caller to free.
> + );
> +
> +//
> +// This PPI contains a set of services to interact with the NVM Express
> +host // controller.
> +//
> +struct _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
> + EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
> + EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
> +};
> +
> +extern EFI_GUID gEdkiiPeiNvmExpressHostControllerPpiGuid;
> +
> +#endif
> diff --git a/MdeModulePkg/MdeModulePkg.dec
> b/MdeModulePkg/MdeModulePkg.dec index 3802b6e0b8..8d7c97ee91
> 100644
> --- a/MdeModulePkg/MdeModulePkg.dec
> +++ b/MdeModulePkg/MdeModulePkg.dec
> @@ -471,6 +471,9 @@
> ## Include/Ppi/PlatformSpecificResetHandler.h
> gEdkiiPlatformSpecificResetHandlerPpiGuid = { 0x75cf14ae, 0x3441, 0x49dc,
> { 0xaa, 0x10, 0xbb, 0x35, 0xa7, 0xba, 0x8b, 0xab } }
>
> + ## Include/Ppi/NvmExpressHostController.h
> + gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f,
> + 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }
> +
> [Protocols]
> ## Load File protocol provides capability to load and unload EFI image into
> memory and execute it.
> # Include/Protocol/LoadPe32Image.h
> --
> 2.12.0.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Hi Ray,
Thanks for the feedbacks.
I will propose a V2 version of the series according to your comments.
Best Regards,
Hao Wu
> -----Original Message-----
> From: Ni, Ruiyu
> Sent: Thursday, June 21, 2018 3:36 PM
> To: Wu, Hao A; edk2-devel@lists.01.org
> Cc: Zeng, Star; Dong, Eric; Yao, Jiewen
> Subject: RE: [PATCH 1/4] MdeModulePkg: Add definitions for EDKII PEI NVME
> host controller PPI
>
>
>
> Thanks/Ray
>
> > -----Original Message-----
> > From: Wu, Hao A
> > Sent: Friday, June 15, 2018 3:04 PM
> > To: edk2-devel@lists.01.org
> > Cc: Wu, Hao A <hao.a.wu@intel.com>; Zeng, Star <star.zeng@intel.com>;
> > Dong, Eric <eric.dong@intel.com>; Ni, Ruiyu <ruiyu.ni@intel.com>; Yao,
> > Jiewen <jiewen.yao@intel.com>
> > Subject: [PATCH 1/4] MdeModulePkg: Add definitions for EDKII PEI NVME
> > host controller PPI
> >
> > Introduces the below PPI:
> >
> > struct EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
> > EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
> > EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
> > };
> >
> > The GetNvmeHcMmioBar service will provide the caller with the MMIO BAR
> > address of each NVMe HC within the system;
> >
> > The GetNvmeHcDevicePath service will provide the caller with the device
> > path information of each NVMe HC.
> >
> > Cc: Star Zeng <star.zeng@intel.com>
> > Cc: Eric Dong <eric.dong@intel.com>
> > Cc: Ruiyu Ni <ruiyu.ni@intel.com>
> > Cc: Jiewen Yao <jiewen.yao@intel.com>
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Hao Wu <hao.a.wu@intel.com>
> > ---
> > MdeModulePkg/Include/Ppi/NvmExpressHostController.h | 97
> > ++++++++++++++++++++
> > MdeModulePkg/MdeModulePkg.dec | 3 +
> > 2 files changed, 100 insertions(+)
> >
> > diff --git a/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
> > b/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
> > new file mode 100644
> > index 0000000000..de9ae4a59c
> > --- /dev/null
> > +++ b/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
> > @@ -0,0 +1,97 @@
> > +/** @file
> > +
> > + Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> This
> > + program and the accompanying materials are licensed and made
> > + available under the terms and conditions of the BSD License which
> > + accompanies this distribution. The full text of the license may be
> > + found at http://opensource.org/licenses/bsd-license.php
> > +
> > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> > BASIS,
> > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > EXPRESS OR IMPLIED.
> > +
> > +**/
> > +
> > +#ifndef _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI_H_
> > +#define _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI_H_
> > +
> > +#include <Protocol/DevicePath.h>
> > +
> > +///
> > +/// Global ID for the EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI.
> > +///
> > +#define EDKII_NVME_EXPRESS_HOST_CONTROLLER_PPI_GUID \
> > + { \
> > + 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde,
> > +0x9a, 0xad } \
> > + }
> > +
> > +//
> > +// Forward declaration for the
> > EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI.
> > +//
> > +typedef struct _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI
> > +EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI;
> > +
> > +/**
> > + Get the MMIO base address of NVM Express host controller.
> > +
> > + @param[in] PeiServices Describes the list of possible PEI Services.
> > + @param[in] This The PPI instance pointer.
> > + @param[in] ControllerId The ID of the NVM Express host controller.
> > + @param[out] MmioBar The MMIO base address of the controller.
> > +
> > + @retval EFI_SUCCESS The operation succeeds.
> > + @retval EFI_INVALID_PARAMETER The parameters are invalid.
> > + @retval EFI_NOT_FOUND The specified NVM Express host controller
> > not
> > + found.
> > +
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR) (
> > + IN EFI_PEI_SERVICES **PeiServices,
>
> 1. PeiServices is not needed.
>
> > + IN EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *This,
> > + IN UINT8 ControllerId,
> > + OUT UINTN *MmioBar
> > + );
> > +
> > +/**
> > + Get the device path of NVM Express host controller.
> > +
> > + @param[in] PeiServices Describes the list of possible PEI Services.
> > + @param[in] This The PPI instance pointer.
> > + @param[in] ControllerId The ID of the NVM Express host controller.
> > + @param[out] DevicePathLenth The length of the device path in bytes
> > specified
> > + by DevicePath.
> > + @param[out] DevicePath The device path of NVM Express host
> > controller.
> > + The caller is responsible for freeing it.
> > + This field re-uses EFI Device Path Protocol as
> > + defined by Section 10.2 EFI Device Path Protocol
> > + of UEFI 2.7 Specification.
> > +
> > + @retval EFI_SUCCESS The operation succeeds.
> > + @retval EFI_INVALID_PARAMETER The parameters are invalid.
> > + @retval EFI_NOT_FOUND The specified NVM Express host controller
> > not
> > + found.
> > + @retval EFI_OUT_OF_RESOURCES The operation fails due to lack of
> > resources.
> > +
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH) (
> > + IN EFI_PEI_SERVICES **PeiServices,
> > + IN EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *This,
> > + IN UINT8 ControllerId,
> > + OUT UINTN *DevicePathLenth,
> > + OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
>
> 2. Firstly, FreePool() is not supported in PEI phase so requiring caller to free is
> confusing.
> Secondly, can the device path be determined at build time? If yes, then a
> pointer to global variable can be returned so no need for caller to free.
>
> > + );
> > +
> > +//
> > +// This PPI contains a set of services to interact with the NVM Express
> > +host // controller.
> > +//
> > +struct _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
> > + EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
> > + EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
> > +};
> > +
> > +extern EFI_GUID gEdkiiPeiNvmExpressHostControllerPpiGuid;
> > +
> > +#endif
> > diff --git a/MdeModulePkg/MdeModulePkg.dec
> > b/MdeModulePkg/MdeModulePkg.dec index 3802b6e0b8..8d7c97ee91
> > 100644
> > --- a/MdeModulePkg/MdeModulePkg.dec
> > +++ b/MdeModulePkg/MdeModulePkg.dec
> > @@ -471,6 +471,9 @@
> > ## Include/Ppi/PlatformSpecificResetHandler.h
> > gEdkiiPlatformSpecificResetHandlerPpiGuid = { 0x75cf14ae, 0x3441, 0x49dc,
> > { 0xaa, 0x10, 0xbb, 0x35, 0xa7, 0xba, 0x8b, 0xab } }
> >
> > + ## Include/Ppi/NvmExpressHostController.h
> > + gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f,
> > + 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }
> > +
> > [Protocols]
> > ## Load File protocol provides capability to load and unload EFI image into
> > memory and execute it.
> > # Include/Protocol/LoadPe32Image.h
> > --
> > 2.12.0.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Please fix typo 'DevicePathLenth' to 'DevicePathLength'.
With that, Reviewed-by: Star Zeng <star.zeng@intel.com>
Thanks,
Star
-----Original Message-----
From: Wu, Hao A
Sent: Friday, June 15, 2018 3:04 PM
To: edk2-devel@lists.01.org
Cc: Wu, Hao A <hao.a.wu@intel.com>; Zeng, Star <star.zeng@intel.com>; Dong, Eric <eric.dong@intel.com>; Ni, Ruiyu <ruiyu.ni@intel.com>; Yao, Jiewen <jiewen.yao@intel.com>
Subject: [PATCH 1/4] MdeModulePkg: Add definitions for EDKII PEI NVME host controller PPI
Introduces the below PPI:
struct EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
};
The GetNvmeHcMmioBar service will provide the caller with the MMIO BAR address of each NVMe HC within the system;
The GetNvmeHcDevicePath service will provide the caller with the device path information of each NVMe HC.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
---
MdeModulePkg/Include/Ppi/NvmExpressHostController.h | 97 ++++++++++++++++++++
MdeModulePkg/MdeModulePkg.dec | 3 +
2 files changed, 100 insertions(+)
diff --git a/MdeModulePkg/Include/Ppi/NvmExpressHostController.h b/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
new file mode 100644
index 0000000000..de9ae4a59c
--- /dev/null
+++ b/MdeModulePkg/Include/Ppi/NvmExpressHostController.h
@@ -0,0 +1,97 @@
+/** @file
+
+ Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> This
+ program and the accompanying materials are licensed and made
+ available under the terms and conditions of the BSD License which
+ accompanies this distribution. The full text of the license may be
+ found at http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI_H_
+#define _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI_H_
+
+#include <Protocol/DevicePath.h>
+
+///
+/// Global ID for the EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI.
+///
+#define EDKII_NVME_EXPRESS_HOST_CONTROLLER_PPI_GUID \
+ { \
+ 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde,
+0x9a, 0xad } \
+ }
+
+//
+// Forward declaration for the EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI.
+//
+typedef struct _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI
+EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI;
+
+/**
+ Get the MMIO base address of NVM Express host controller.
+
+ @param[in] PeiServices Describes the list of possible PEI Services.
+ @param[in] This The PPI instance pointer.
+ @param[in] ControllerId The ID of the NVM Express host controller.
+ @param[out] MmioBar The MMIO base address of the controller.
+
+ @retval EFI_SUCCESS The operation succeeds.
+ @retval EFI_INVALID_PARAMETER The parameters are invalid.
+ @retval EFI_NOT_FOUND The specified NVM Express host controller not
+ found.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR) (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *This,
+ IN UINT8 ControllerId,
+ OUT UINTN *MmioBar
+ );
+
+/**
+ Get the device path of NVM Express host controller.
+
+ @param[in] PeiServices Describes the list of possible PEI Services.
+ @param[in] This The PPI instance pointer.
+ @param[in] ControllerId The ID of the NVM Express host controller.
+ @param[out] DevicePathLenth The length of the device path in bytes specified
+ by DevicePath.
+ @param[out] DevicePath The device path of NVM Express host controller.
+ The caller is responsible for freeing it.
+ This field re-uses EFI Device Path Protocol as
+ defined by Section 10.2 EFI Device Path Protocol
+ of UEFI 2.7 Specification.
+
+ @retval EFI_SUCCESS The operation succeeds.
+ @retval EFI_INVALID_PARAMETER The parameters are invalid.
+ @retval EFI_NOT_FOUND The specified NVM Express host controller not
+ found.
+ @retval EFI_OUT_OF_RESOURCES The operation fails due to lack of resources.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH) (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *This,
+ IN UINT8 ControllerId,
+ OUT UINTN *DevicePathLenth,
+ OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ );
+
+//
+// This PPI contains a set of services to interact with the NVM Express
+host // controller.
+//
+struct _EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
+ EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
+ EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
+};
+
+extern EFI_GUID gEdkiiPeiNvmExpressHostControllerPpiGuid;
+
+#endif
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec index 3802b6e0b8..8d7c97ee91 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -471,6 +471,9 @@
## Include/Ppi/PlatformSpecificResetHandler.h
gEdkiiPlatformSpecificResetHandlerPpiGuid = { 0x75cf14ae, 0x3441, 0x49dc, { 0xaa, 0x10, 0xbb, 0x35, 0xa7, 0xba, 0x8b, 0xab } }
+ ## Include/Ppi/NvmExpressHostController.h
+ gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f,
+ 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
--
2.12.0.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2026 Red Hat, Inc.