From: "Kinney, Michael D" <michael.d.kinney@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Add PerformFlashWriteWithProgress() to the PlatformFlashAccessLib.
This allows the platform to inform the user of progress when a
firmware storage device is being updated with a new firmware
image.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
---
.../PlatformFlashAccessLibDxe.c | 71 +++++++++++++++++++---
1 file changed, 63 insertions(+), 8 deletions(-)
diff --git a/Silicon/Hisilicon/Library/PlatformFlashAccessLib/PlatformFlashAccessLibDxe.c b/Silicon/Hisilicon/Library/PlatformFlashAccessLib/PlatformFlashAccessLibDxe.c
index 62da61c79b..585f7ef0e8 100644
--- a/Silicon/Hisilicon/Library/PlatformFlashAccessLib/PlatformFlashAccessLibDxe.c
+++ b/Silicon/Hisilicon/Library/PlatformFlashAccessLib/PlatformFlashAccessLibDxe.c
@@ -3,7 +3,7 @@
Copyright (c) 2018, Hisilicon Limited. All rights reserved.
Copyright (c) 2018, Linaro Limited. All rights reserved.
- Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -30,13 +30,29 @@ STATIC EFI_PHYSICAL_ADDRESS mSFCMEM0BaseAddress;
STATIC HISI_SPI_FLASH_PROTOCOL *mSpiProtocol;
/**
- Perform flash write opreation.
+ Perform flash write operation with progress indicator. The start and end
+ completion percentage values are passed into this function. If the requested
+ flash write operation is broken up, then completion percentage between the
+ start and end values may be passed to the provided Progress function. The
+ caller of this function is required to call the Progress function for the
+ start and end completion percentage values. This allows the Progress,
+ StartPercentage, and EndPercentage parameters to be ignored if the requested
+ flash write operation can not be broken up
@param[in] FirmwareType The type of firmware.
@param[in] FlashAddress The address of flash device to be accessed.
@param[in] FlashAddressType The type of flash device address.
@param[in] Buffer The pointer to the data buffer.
@param[in] Length The length of data buffer in bytes.
+ @param[in] Progress A function used report the progress of the
+ firmware update. This is an optional parameter
+ that may be NULL.
+ @param[in] StartPercentage The start completion percentage value that may
+ be used to report progress during the flash
+ write operation.
+ @param[in] EndPercentage The end completion percentage value that may
+ be used to report progress during the flash
+ write operation.
@retval EFI_SUCCESS The operation returns successfully.
@retval EFI_WRITE_PROTECTED The flash device is read only.
@@ -45,12 +61,15 @@ STATIC HISI_SPI_FLASH_PROTOCOL *mSpiProtocol;
**/
EFI_STATUS
EFIAPI
-PerformFlashWrite (
- IN PLATFORM_FIRMWARE_TYPE FirmwareType,
- IN EFI_PHYSICAL_ADDRESS FlashAddress,
- IN FLASH_ADDRESS_TYPE FlashAddressType,
- IN VOID *Buffer,
- IN UINTN Length
+PerformFlashWriteWithProgress (
+ IN PLATFORM_FIRMWARE_TYPE FirmwareType,
+ IN EFI_PHYSICAL_ADDRESS FlashAddress,
+ IN FLASH_ADDRESS_TYPE FlashAddressType,
+ IN VOID *Buffer,
+ IN UINTN Length,
+ IN EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS Progress, OPTIONAL
+ IN UINTN StartPercentage,
+ IN UINTN EndPercentage
)
{
UINT32 RomAddress;
@@ -83,6 +102,42 @@ PerformFlashWrite (
return Status;
}
+/**
+ Perform flash write operation.
+
+ @param[in] FirmwareType The type of firmware.
+ @param[in] FlashAddress The address of flash device to be accessed.
+ @param[in] FlashAddressType The type of flash device address.
+ @param[in] Buffer The pointer to the data buffer.
+ @param[in] Length The length of data buffer in bytes.
+
+ @retval EFI_SUCCESS The operation returns successfully.
+ @retval EFI_WRITE_PROTECTED The flash device is read only.
+ @retval EFI_UNSUPPORTED The flash device access is unsupported.
+ @retval EFI_INVALID_PARAMETER The input parameter is not valid.
+**/
+EFI_STATUS
+EFIAPI
+PerformFlashWrite (
+ IN PLATFORM_FIRMWARE_TYPE FirmwareType,
+ IN EFI_PHYSICAL_ADDRESS FlashAddress,
+ IN FLASH_ADDRESS_TYPE FlashAddressType,
+ IN VOID *Buffer,
+ IN UINTN Length
+ )
+{
+ return PerformFlashWriteWithProgress (
+ FirmwareType,
+ FlashAddress,
+ FlashAddressType,
+ Buffer,
+ Length,
+ NULL,
+ 0,
+ 0
+ );
+}
+
/**
Platform Flash Access Lib Constructor.
--
2.14.2.windows.3
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel