https://bugzilla.tianocore.org/show_bug.cgi?id=801

Add PerformFlashWriteWithProgress() to the PlatformFlashAccessLib.
This allows the platform to inform the user of progress when a
firmware storage device is being updated with a new firmware
image.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
---
 .../StyxPlatformFlashAccessLib.c                   | 70 +++++++++++++++++++---
 1 file changed, 63 insertions(+), 7 deletions(-)

diff --git a/Silicon/AMD/Styx/Library/StyxPlatformFlashAccessLib/StyxPlatformFlashAccessLib.c b/Silicon/AMD/Styx/Library/StyxPlatformFlashAccessLib/StyxPlatformFlashAccessLib.c
index a94373bb4b..38f1830b5c 100644
--- a/Silicon/AMD/Styx/Library/StyxPlatformFlashAccessLib/StyxPlatformFlashAccessLib.c
+++ b/Silicon/AMD/Styx/Library/StyxPlatformFlashAccessLib/StyxPlatformFlashAccessLib.c
@@ -2,6 +2,7 @@
   Platform flash device access library for AMD Styx
 
   Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR>
+  Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
 
   This program and the accompanying materials
   are licensed and made available under the terms and conditions of the BSD License
@@ -27,13 +28,29 @@ STATIC CONST UINT64 mFlashMaxSize = FixedPcdGet64 (PcdFdSize);
 STATIC CONST UINTN mBlockSize = SIZE_64KB;
 
 /**
-  Perform flash write operation.
+  Perform flash write operation with progress indicator.  The start and end
+  completion percentage values are passed into this function.  If the requested
+  flash write operation is broken up, then completion percentage between the
+  start and end values may be passed to the provided Progress function.  The
+  caller of this function is required to call the Progress function for the
+  start and end completion percentage values.  This allows the Progress,
+  StartPercentage, and EndPercentage parameters to be ignored if the requested
+  flash write operation can not be broken up
 
   @param[in] FirmwareType      The type of firmware.
   @param[in] FlashAddress      The address of flash device to be accessed.
   @param[in] FlashAddressType  The type of flash device address.
   @param[in] Buffer            The pointer to the data buffer.
   @param[in] Length            The length of data buffer in bytes.
+  @param[in] Progress          A function used report the progress of the
+                               firmware update.  This is an optional parameter
+                               that may be NULL.
+  @param[in] StartPercentage   The start completion percentage value that may
+                               be used to report progress during the flash
+                               write operation.
+  @param[in] EndPercentage     The end completion percentage value that may
+                               be used to report progress during the flash
+                               write operation.
 
   @retval EFI_SUCCESS           The operation returns successfully.
   @retval EFI_WRITE_PROTECTED   The flash device is read only.
@@ -42,12 +59,15 @@ STATIC CONST UINTN mBlockSize = SIZE_64KB;
 **/
 EFI_STATUS
 EFIAPI
-PerformFlashWrite (
-  IN PLATFORM_FIRMWARE_TYPE       FirmwareType,
-  IN EFI_PHYSICAL_ADDRESS         FlashAddress,
-  IN FLASH_ADDRESS_TYPE           FlashAddressType,
-  IN VOID                         *Buffer,
-  IN UINTN                        Length
+PerformFlashWriteWithProgress (
+  IN PLATFORM_FIRMWARE_TYPE                         FirmwareType,
+  IN EFI_PHYSICAL_ADDRESS                           FlashAddress,
+  IN FLASH_ADDRESS_TYPE                             FlashAddressType,
+  IN VOID                                           *Buffer,
+  IN UINTN                                          Length,
+  IN EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS  Progress,        OPTIONAL
+  IN UINTN                                          StartPercentage,
+  IN UINTN                                          EndPercentage
   )
 {
   EFI_STATUS                      Status;
@@ -122,3 +142,39 @@ PerformFlashWrite (
 
   return EFI_SUCCESS;
 }
+
+/**
+  Perform flash write operation.
+
+  @param[in] FirmwareType      The type of firmware.
+  @param[in] FlashAddress      The address of flash device to be accessed.
+  @param[in] FlashAddressType  The type of flash device address.
+  @param[in] Buffer            The pointer to the data buffer.
+  @param[in] Length            The length of data buffer in bytes.
+
+  @retval EFI_SUCCESS           The operation returns successfully.
+  @retval EFI_WRITE_PROTECTED   The flash device is read only.
+  @retval EFI_UNSUPPORTED       The flash device access is unsupported.
+  @retval EFI_INVALID_PARAMETER The input parameter is not valid.
+**/
+EFI_STATUS
+EFIAPI
+PerformFlashWrite (
+  IN PLATFORM_FIRMWARE_TYPE       FirmwareType,
+  IN EFI_PHYSICAL_ADDRESS         FlashAddress,
+  IN FLASH_ADDRESS_TYPE           FlashAddressType,
+  IN VOID                         *Buffer,
+  IN UINTN                        Length
+  )
+{
+  return PerformFlashWriteWithProgress (
+           FirmwareType,
+           FlashAddress,
+           FlashAddressType,
+           Buffer,
+           Length,
+           NULL,
+           0,
+           0
+           );
+}
-- 
2.14.2.windows.3

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel