On Thu, Jan 25, 2018 at 12:27:34PM +0000, Ard Biesheuvel wrote:
> Align the UART DT nodes:
> - use 'uart' not 'fuart' as node name for the second serial port
> - create an alias 'serial1' for the second serial port
> - use UART clock reference instead of hardcoded frequency
> - split 'clocks' property into 1 cell per phandle
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> ---
> Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
> index 37a3981f0360..7c3518facb98 100644
> --- a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
> +++ b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
> @@ -32,6 +32,7 @@
>
> aliases {
> serial0 = &soc_uart0;
> + serial1 = &fuart;
> };
>
> chosen {
> @@ -436,15 +437,16 @@
> compatible = "arm,pl011", "arm,primecell";
> reg = <0x0 0x2a400000 0x0 0x1000>;
> interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk_uart &clk_apb>;
> + clocks = <&clk_uart>, <&clk_apb>;
> clock-names = "uartclk", "apb_pclk";
> };
>
> - fuart: fuart@51040000 {
> + fuart: uart@51040000 {
> compatible = "snps,dw-apb-uart";
> reg = <0x0 0x51040000 0x0 0x1000>;
> interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
> - clock-frequency = <62500000>;
> + clocks = <&clk_uart>, <&clk_apb>;
> + clock-names = "baudclk", "apb_pclk";
> reg-io-width = <4>;
> reg-shift = <2>;
> };
> --
> 2.11.0
>
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel