Enable SATA LED function on MinnowBoard3 Next pre-production board.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: zwei4 <david.wei@intel.com>
---
.../Board/MinnowBoard3Next/BoardInitPostMem/BoardGpios.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Platform/BroxtonPlatformPkg/Board/MinnowBoard3Next/BoardInitPostMem/BoardGpios.h b/Platform/BroxtonPlatformPkg/Board/MinnowBoard3Next/BoardInitPostMem/BoardGpios.h
index 49340b10f..f51274f19 100644
--- a/Platform/BroxtonPlatformPkg/Board/MinnowBoard3Next/BoardInitPostMem/BoardGpios.h
+++ b/Platform/BroxtonPlatformPkg/Board/MinnowBoard3Next/BoardInitPostMem/BoardGpios.h
@@ -89,7 +89,7 @@ BXT_GPIO_PAD_INIT mMinnow3Next_GpioInitData_N[] =
BXT_GPIO_PAD_CONF(L"GPIO_23", M0 , GPI , NA , NA , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00B8, NORTH), // BOOT_SEL1#
BXT_GPIO_PAD_CONF(L"GPIO_24", M0 , GPI , NA , NA , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00C0, NORTH), // BOOT_SEL0#
BXT_GPIO_PAD_CONF(L"GPIO_25", M0 , GPI , NA , NA , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00C8, NORTH), // TEST#
- BXT_GPIO_PAD_CONF(L"GPIO_26", M0 , GPO , NA , HI , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00D0, NORTH), // SATA_LED#
+ BXT_GPIO_PAD_CONF(L"GPIO_26", M5 , NA , NA , NA , NA , Wake_Disabled, P_20K_L, NA , NA, NA , NA, GPIO_PADBAR+0x00D0, NORTH), // SATA_LEDN
BXT_GPIO_PAD_CONF(L"GPIO_27", M0 , GPI , NA , NA , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00D8, NORTH), // NC
BXT_GPIO_PAD_CONF(L"GPIO_28", M0 , GPO , NA , HI , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00E0, NORTH), // USB2_EN
BXT_GPIO_PAD_CONF(L"GPIO_29", M0 , GPO , NA , HI , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00E8, NORTH), // USB_DRIVE_BUS_1V8
--
2.14.1.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel