[v2] UefiCpuPkg/MpLib.c: Set AP state after X2APIC mode enabled

[edk2] [PATCH v2] UefiCpuPkg/MpLib.c: Set AP state after X2APIC mode enabled

Posted by Jeff Fan 8 years, 9 months ago

After X2APIC mode is enabled, APs need to be set tp IDLE state, otherwise APs
cannot be waken up by MP PPI services.

https://bugzilla.tianocore.org/show_bug.cgi?id=505

Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
---
 UefiCpuPkg/Library/MpInitLib/MpLib.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index 03d6c2d..e502e36 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -434,6 +434,8 @@ CollectProcessorCount (
   IN CPU_MP_DATA         *CpuMpData
   )
 {
+  UINTN                  Index;
+
   //
   // Send 1st broadcast IPI to APs to wakeup APs
   //
@@ -465,6 +467,12 @@ CollectProcessorCount (
     // Enable x2APIC on BSP
     //
     SetApicMode (LOCAL_APIC_MODE_X2APIC);
+    //
+    // Set BSP/Aps state to IDLE
+    //
+    for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
+      SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);
+    }
   }
   DEBUG ((DEBUG_INFO, "APIC MODE is %d\n", GetApicMode ()));
   //
-- 
2.9.3.windows.2

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] [PATCH v2] UefiCpuPkg/MpLib.c: Set AP state after X2APIC mode enabled

Posted by Tian, Feng 8 years, 9 months ago

Reviewed-by: Feng Tian <feng.tian@intel.com>

-----Original Message-----
From: Fan, Jeff 
Sent: Tuesday, April 25, 2017 2:54 PM
To: edk2-devel@lists.01.org
Cc: Tian, Feng <feng.tian@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>
Subject: [PATCH v2] UefiCpuPkg/MpLib.c: Set AP state after X2APIC mode enabled

After X2APIC mode is enabled, APs need to be set tp IDLE state, otherwise APs cannot be waken up by MP PPI services.

https://bugzilla.tianocore.org/show_bug.cgi?id=505

Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
---
 UefiCpuPkg/Library/MpInitLib/MpLib.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index 03d6c2d..e502e36 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -434,6 +434,8 @@ CollectProcessorCount (
   IN CPU_MP_DATA         *CpuMpData
   )
 {
+  UINTN                  Index;
+
   //
   // Send 1st broadcast IPI to APs to wakeup APs
   //
@@ -465,6 +467,12 @@ CollectProcessorCount (
     // Enable x2APIC on BSP
     //
     SetApicMode (LOCAL_APIC_MODE_X2APIC);
+    //
+    // Set BSP/Aps state to IDLE
+    //
+    for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
+      SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);
+    }
   }
   DEBUG ((DEBUG_INFO, "APIC MODE is %d\n", GetApicMode ()));
   //
--
2.9.3.windows.2

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel