In the DXE fw_cfg instance:
- QemuFwCfgS3Enabled() queries S3 enablement via fw_cfg. This behavior is
shared with the PEI fw_cfg instance, and the DXE fw_cfg instance already
pulls in the function from "QemuFwCfgS3PeiDxe.c".
- If QemuFwCfgS3Enabled() returns TRUE, the client module is permitted to
call QemuFwCfgS3CallWhenBootScriptReady().
We provide a fully functional implementation for
QemuFwCfgS3CallWhenBootScriptReady(). A protocol notify is installed at
TPL_CALLBACK for EFI_S3_SAVE_STATE_PROTOCOL. If / once the protocol is
available, the client module's Callback() function is called, which is
expected to produce ACPI S3 Boot Script opcodes using the helper
functions listed below. In QemuFwCfgS3CallWhenBootScriptReady(), we also
allocate a reserved memory buffer, sized & typed by the client module,
for the opcodes and (internally) the fw_cfg DMA operations to work upon,
during S3 resume.
This behavior is unique to the DXE fw_cfg instance. Thus, add the
function to "QemuFwCfgS3Dxe.c".
- The QemuFwCfgS3ScriptWriteBytes(), QemuFwCfgS3ScriptReadBytes(),
QemuFwCfgS3ScriptSkipBytes(), and QemuFwCfgS3ScriptCheckValue()
functions are also implemented usefully, since the client module's
Callback() function is expected to invoke them.
Each of the first three functions produces MEM_WRITE, IO_WRITE, and
MEM_POLL opcodes, to set up the DMA command in reserved memory, to start
the DMA transfer, and to check the DMA result, respectively.
The QemuFwCfgS3ScriptCheckValue() function produces a MEM_POLL opcode to
validate an unsigned integer field in data that was read via
QemuFwCfgS3ScriptReadBytes().
This behavior is again unique to the DXE fw_cfg instance, so add the
functions to "QemuFwCfgS3Dxe.c".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
v2:
- rename QemuFwCfgS3TransferOwnership to
QemuFwCfgS3CallWhenBootScriptReady [Jordan]
- rename FW_CFG_BOOT_SCRIPT_APPEND_FUNCTION to
FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION [Jordan]
- rename "Append" to "Callback" and "mAppend" to "mCallback" [Laszlo]
- rename QemuFwCfgS3WriteBytes, QemuFwCfgS3ReadBytes,
QemuFwCfgS3SkipBytes, and QemuFwCfgS3CheckValue to
QemuFwCfgS3ScriptWriteBytes, QemuFwCfgS3ScriptReadBytes,
QemuFwCfgS3ScriptSkipBytes, and QemuFwCfgS3ScriptCheckValue,
respectively [Jordan]
OvmfPkg/Library/QemuFwCfgS3Lib/DxeQemuFwCfgS3LibFwCfg.inf | 8 +
OvmfPkg/Library/QemuFwCfgS3Lib/QemuFwCfgS3Dxe.c | 792 ++++++++++++++++++++
2 files changed, 800 insertions(+)
diff --git a/OvmfPkg/Library/QemuFwCfgS3Lib/DxeQemuFwCfgS3LibFwCfg.inf b/OvmfPkg/Library/QemuFwCfgS3Lib/DxeQemuFwCfgS3LibFwCfg.inf
index 7016575f3dab..a0e4275cb8a5 100644
--- a/OvmfPkg/Library/QemuFwCfgS3Lib/DxeQemuFwCfgS3LibFwCfg.inf
+++ b/OvmfPkg/Library/QemuFwCfgS3Lib/DxeQemuFwCfgS3LibFwCfg.inf
@@ -28,6 +28,7 @@ [Defines]
#
[Sources]
+ QemuFwCfgS3Dxe.c
QemuFwCfgS3PeiDxe.c
[Packages]
@@ -35,4 +36,11 @@ [Packages]
OvmfPkg/OvmfPkg.dec
[LibraryClasses]
+ BaseLib
+ DebugLib
+ MemoryAllocationLib
QemuFwCfgLib
+ UefiBootServicesTableLib
+
+[Protocols]
+ gEfiS3SaveStateProtocolGuid ## SOMETIMES_CONSUMES
diff --git a/OvmfPkg/Library/QemuFwCfgS3Lib/QemuFwCfgS3Dxe.c b/OvmfPkg/Library/QemuFwCfgS3Lib/QemuFwCfgS3Dxe.c
new file mode 100644
index 000000000000..0bd6cf939904
--- /dev/null
+++ b/OvmfPkg/Library/QemuFwCfgS3Lib/QemuFwCfgS3Dxe.c
@@ -0,0 +1,792 @@
+/** @file
+ Full functionality QemuFwCfgS3Lib instance, for DXE phase modules.
+
+ Copyright (C) 2017, Red Hat, Inc.
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+ WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/QemuFwCfgLib.h>
+#include <Library/QemuFwCfgS3Lib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/S3SaveState.h>
+
+
+//
+// Event to signal when the S3SaveState protocol interface is installed.
+//
+STATIC EFI_EVENT mS3SaveStateInstalledEvent;
+
+//
+// Reference to the S3SaveState protocol interface, after it is installed.
+//
+STATIC EFI_S3_SAVE_STATE_PROTOCOL *mS3SaveState;
+
+//
+// The control structure is allocated in reserved memory, aligned at 8 bytes.
+// The client-requested ScratchBuffer will be allocated adjacently, also
+// aligned at 8 bytes.
+//
+#define RESERVED_MEM_ALIGNMENT 8
+
+STATIC FW_CFG_DMA_ACCESS *mDmaAccess;
+STATIC VOID *mScratchBuffer;
+STATIC UINTN mScratchBufferSize;
+
+//
+// Callback provided by the client, for appending ACPI S3 Boot Script opcodes.
+// To be called from S3SaveStateInstalledNotify().
+//
+STATIC FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION *mCallback;
+
+
+/**
+ Event notification function for mS3SaveStateInstalledEvent.
+**/
+STATIC
+VOID
+EFIAPI
+S3SaveStateInstalledNotify (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+
+ ASSERT (Event == mS3SaveStateInstalledEvent);
+
+ Status = gBS->LocateProtocol (&gEfiS3SaveStateProtocolGuid,
+ NULL /* Registration */, (VOID **)&mS3SaveState);
+ if (EFI_ERROR (Status)) {
+ return;
+ }
+
+ ASSERT (mCallback != NULL);
+
+ DEBUG ((DEBUG_INFO, "%a: %a: DmaAccess@0x%Lx ScratchBuffer@[0x%Lx+0x%Lx]\n",
+ gEfiCallerBaseName, __FUNCTION__, (UINT64)(UINTN)mDmaAccess,
+ (UINT64)(UINTN)mScratchBuffer, (UINT64)mScratchBufferSize));
+ mCallback (Context, mScratchBuffer);
+
+ gBS->CloseEvent (mS3SaveStateInstalledEvent);
+ mS3SaveStateInstalledEvent = NULL;
+}
+
+
+/**
+ Install the client module's FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION callback for
+ when the production of ACPI S3 Boot Script opcodes becomes possible.
+
+ Take ownership of the client-provided Context, and pass it to the callback
+ function, when the latter is invoked.
+
+ Allocate scratch space for those ACPI S3 Boot Script opcodes to work upon
+ that the client will produce in the callback function.
+
+ @param[in] Callback FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION to invoke
+ when the production of ACPI S3 Boot Script
+ opcodes becomes possible. Callback() may be
+ called immediately from
+ QemuFwCfgS3CallWhenBootScriptReady().
+
+ @param[in,out] Context Client-provided data structure for the
+ Callback() callback function to consume.
+
+ If Context points to dynamically allocated
+ memory, then Callback() must release it.
+
+ If Context points to dynamically allocated
+ memory, and
+ QemuFwCfgS3CallWhenBootScriptReady() returns
+ successfully, then the caller of
+ QemuFwCfgS3CallWhenBootScriptReady() must
+ neither dereference nor even evaluate Context
+ any longer, as ownership of the referenced area
+ has been transferred to Callback().
+
+ @param[in] ScratchBufferSize The size of the scratch buffer that will hold,
+ in reserved memory, all client data read,
+ written, and checked by the ACPI S3 Boot Script
+ opcodes produced by Callback().
+
+ @retval RETURN_UNSUPPORTED The library instance does not support this
+ function.
+
+ @retval RETURN_NOT_FOUND The fw_cfg DMA interface to QEMU is
+ unavailable.
+
+ @retval RETURN_BAD_BUFFER_SIZE ScratchBufferSize is too large.
+
+ @retval RETURN_OUT_OF_RESOURCES Memory allocation failed.
+
+ @retval RETURN_SUCCESS Callback() has been installed, and the
+ ownership of Context has been transferred.
+ Reserved memory has been allocated for the
+ scratch buffer.
+
+ A successful invocation of
+ QemuFwCfgS3CallWhenBootScriptReady() cannot
+ be rolled back.
+
+ @return Error codes from underlying functions.
+**/
+EFIAPI
+RETURN_STATUS
+QemuFwCfgS3CallWhenBootScriptReady (
+ IN FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION *Callback,
+ IN OUT VOID *Context, OPTIONAL
+ IN UINTN ScratchBufferSize
+ )
+{
+ EFI_STATUS Status;
+ VOID *Registration;
+
+ //
+ // Basic fw_cfg is certainly available, as we can only be here after a
+ // successful call to QemuFwCfgS3Enabled(). Check fw_cfg DMA availability.
+ //
+ ASSERT (QemuFwCfgIsAvailable ());
+ QemuFwCfgSelectItem (QemuFwCfgItemInterfaceVersion);
+ if ((QemuFwCfgRead32 () & FW_CFG_F_DMA) == 0) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: fw_cfg DMA unavailable\n",
+ gEfiCallerBaseName, __FUNCTION__));
+ return RETURN_NOT_FOUND;
+ }
+
+ //
+ // Allocate a reserved buffer for the DMA access control structure and the
+ // client data together.
+ //
+ if (ScratchBufferSize >
+ MAX_UINT32 - (RESERVED_MEM_ALIGNMENT - 1) - sizeof *mDmaAccess) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: ScratchBufferSize too big: %Lu\n",
+ gEfiCallerBaseName, __FUNCTION__, (UINT64)ScratchBufferSize));
+ return RETURN_BAD_BUFFER_SIZE;
+ }
+ mDmaAccess = AllocateReservedPool ((RESERVED_MEM_ALIGNMENT - 1) +
+ sizeof *mDmaAccess + ScratchBufferSize);
+ if (mDmaAccess == NULL) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: AllocateReservedPool(): out of resources\n",
+ gEfiCallerBaseName, __FUNCTION__));
+ return RETURN_OUT_OF_RESOURCES;
+ }
+ mDmaAccess = ALIGN_POINTER (mDmaAccess, RESERVED_MEM_ALIGNMENT);
+
+ //
+ // Set up a protocol notify for EFI_S3_SAVE_STATE_PROTOCOL. Forward the
+ // client's Context to the callback.
+ //
+ Status = gBS->CreateEvent (EVT_NOTIFY_SIGNAL, TPL_CALLBACK,
+ S3SaveStateInstalledNotify, Context,
+ &mS3SaveStateInstalledEvent);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: CreateEvent(): %r\n", gEfiCallerBaseName,
+ __FUNCTION__, Status));
+ goto FreeDmaAccess;
+ }
+ Status = gBS->RegisterProtocolNotify (&gEfiS3SaveStateProtocolGuid,
+ mS3SaveStateInstalledEvent, &Registration);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: RegisterProtocolNotify(): %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ goto CloseEvent;
+ }
+
+ //
+ // Set the remaining global variables. For the alignment guarantee on
+ // mScratchBuffer, we rely on the fact that *mDmaAccess has a size that is an
+ // integral multiple of RESERVED_MEM_ALIGNMENT.
+ //
+ ASSERT (sizeof *mDmaAccess % RESERVED_MEM_ALIGNMENT == 0);
+ mScratchBuffer = mDmaAccess + 1;
+ mScratchBufferSize = ScratchBufferSize;
+ mCallback = Callback;
+
+ //
+ // Kick the event; EFI_S3_SAVE_STATE_PROTOCOL could be available already.
+ //
+ Status = gBS->SignalEvent (mS3SaveStateInstalledEvent);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: SignalEvent(): %r\n", gEfiCallerBaseName,
+ __FUNCTION__, Status));
+ goto NullGlobals;
+ }
+
+ return RETURN_SUCCESS;
+
+NullGlobals:
+ mScratchBuffer = NULL;
+ mScratchBufferSize = 0;
+ mCallback = NULL;
+
+CloseEvent:
+ gBS->CloseEvent (mS3SaveStateInstalledEvent);
+ mS3SaveStateInstalledEvent = NULL;
+
+FreeDmaAccess:
+ FreePool (mDmaAccess);
+ mDmaAccess = NULL;
+
+ return (RETURN_STATUS)Status;
+}
+
+
+/**
+ Produce ACPI S3 Boot Script opcodes that (optionally) select an fw_cfg item,
+ and transfer data to it.
+
+ The opcodes produced by QemuFwCfgS3ScriptWriteBytes() will first restore
+ NumberOfBytes bytes in ScratchBuffer in-place, in reserved memory, then write
+ them to fw_cfg using DMA.
+
+ If the operation fails during S3 resume, the boot script will hang.
+
+ This function may only be called from the client module's
+ FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady() as Callback.
+
+ @param[in] FirmwareConfigItem The UINT16 selector key of the firmware config
+ item to write, expressed as INT32. If
+ FirmwareConfigItem is -1, no selection is
+ made, the write will occur to the currently
+ selected item, at its currently selected
+ offset. Otherwise, the specified item will be
+ selected, and the write will occur at offset
+ 0.
+
+ @param[in] NumberOfBytes Size of the data to restore in ScratchBuffer,
+ and to write from ScratchBuffer, during S3
+ resume. NumberOfBytes must not exceed
+ ScratchBufferSize, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady().
+
+ @retval RETURN_SUCCESS The opcodes were appended to the ACPI S3
+ Boot Script successfully. There is no way
+ to undo this action.
+
+ @retval RETURN_INVALID_PARAMETER FirmwareConfigItem is invalid.
+
+ @retval RETURN_BAD_BUFFER_SIZE NumberOfBytes is larger than
+ ScratchBufferSize.
+
+ @return Error codes from underlying functions.
+**/
+EFIAPI
+RETURN_STATUS
+QemuFwCfgS3ScriptWriteBytes (
+ IN INT32 FirmwareConfigItem,
+ IN UINTN NumberOfBytes
+ )
+{
+ UINTN Count;
+ EFI_STATUS Status;
+ UINT64 AccessAddress;
+ UINT32 ControlPollData;
+ UINT32 ControlPollMask;
+
+ ASSERT (mDmaAccess != NULL);
+ ASSERT (mS3SaveState != NULL);
+
+ if (FirmwareConfigItem < -1 || FirmwareConfigItem > MAX_UINT16) {
+ return RETURN_INVALID_PARAMETER;
+ }
+ if (NumberOfBytes > mScratchBufferSize) {
+ return RETURN_BAD_BUFFER_SIZE;
+ }
+
+ //
+ // Set up a write[+select] fw_cfg DMA command.
+ //
+ mDmaAccess->Control = FW_CFG_DMA_CTL_WRITE;
+ if (FirmwareConfigItem != -1) {
+ mDmaAccess->Control |= FW_CFG_DMA_CTL_SELECT;
+ mDmaAccess->Control |= (UINT32)FirmwareConfigItem << 16;
+ }
+ mDmaAccess->Control = SwapBytes32 (mDmaAccess->Control);
+
+ //
+ // We ensured the following constraint via mScratchBufferSize in
+ // QemuFwCfgS3CallWhenBootScriptReady().
+ //
+ ASSERT (NumberOfBytes <= MAX_UINT32);
+ mDmaAccess->Length = SwapBytes32 ((UINT32)NumberOfBytes);
+
+ mDmaAccess->Address = SwapBytes64 ((UINTN)mScratchBuffer);
+
+ //
+ // Copy mDmaAccess and NumberOfBytes bytes from mScratchBuffer into the boot
+ // script. When executed at S3 resume, this opcode will restore all of them
+ // in-place.
+ //
+ Count = (UINTN)mScratchBuffer + NumberOfBytes - (UINTN)mDmaAccess;
+ Status = mS3SaveState->Write (
+ mS3SaveState, // This
+ EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE, // OpCode
+ EfiBootScriptWidthUint8, // Width
+ (UINT64)(UINTN)mDmaAccess, // Address
+ Count, // Count
+ (VOID *)mDmaAccess // Buffer
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE: %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ return (RETURN_STATUS)Status;
+ }
+
+ //
+ // Append an opcode that will write the address of the fw_cfg DMA command to
+ // the fw_cfg DMA address register, which consists of two 32-bit IO ports.
+ // The second (highest address, least significant) write will start the
+ // transfer.
+ //
+ AccessAddress = SwapBytes64 ((UINTN)mDmaAccess);
+ Status = mS3SaveState->Write (
+ mS3SaveState, // This
+ EFI_BOOT_SCRIPT_IO_WRITE_OPCODE, // OpCode
+ EfiBootScriptWidthUint32, // Width
+ (UINT64)FW_CFG_IO_DMA_ADDRESS, // Address
+ (UINTN)2, // Count
+ (VOID *)&AccessAddress // Buffer
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: EFI_BOOT_SCRIPT_IO_WRITE_OPCODE: %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ return (RETURN_STATUS)Status;
+ }
+
+ //
+ // The following opcode will wait until the Control word reads as zero
+ // (transfer complete). As timeout we use MAX_UINT64 * 100ns, which is
+ // approximately 58494 years.
+ //
+ ControlPollData = 0;
+ ControlPollMask = MAX_UINT32;
+ Status = mS3SaveState->Write (
+ mS3SaveState, // This
+ EFI_BOOT_SCRIPT_MEM_POLL_OPCODE, // OpCode
+ EfiBootScriptWidthUint32, // Width
+ (UINT64)(UINTN)&mDmaAccess->Control, // Address
+ (VOID *)&ControlPollData, // Data
+ (VOID *)&ControlPollMask, // DataMask
+ MAX_UINT64 // Delay
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: EFI_BOOT_SCRIPT_MEM_POLL_OPCODE: %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ return (RETURN_STATUS)Status;
+ }
+
+ return RETURN_SUCCESS;
+}
+
+
+/**
+ Produce ACPI S3 Boot Script opcodes that (optionally) select an fw_cfg item,
+ and transfer data from it.
+
+ The opcodes produced by QemuFwCfgS3ScriptReadBytes() will read NumberOfBytes
+ bytes from fw_cfg using DMA, storing the result in ScratchBuffer, in reserved
+ memory.
+
+ If the operation fails during S3 resume, the boot script will hang.
+
+ This function may only be called from the client module's
+ FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady() as Callback.
+
+ @param[in] FirmwareConfigItem The UINT16 selector key of the firmware config
+ item to read, expressed as INT32. If
+ FirmwareConfigItem is -1, no selection is
+ made, the read will occur from the currently
+ selected item, from its currently selected
+ offset. Otherwise, the specified item will be
+ selected, and the read will occur from offset
+ 0.
+
+ @param[in] NumberOfBytes Size of the data to read during S3 resume.
+ NumberOfBytes must not exceed
+ ScratchBufferSize, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady().
+
+ @retval RETURN_SUCCESS The opcodes were appended to the ACPI S3
+ Boot Script successfully. There is no way
+ to undo this action.
+
+ @retval RETURN_INVALID_PARAMETER FirmwareConfigItem is invalid.
+
+ @retval RETURN_BAD_BUFFER_SIZE NumberOfBytes is larger than
+ ScratchBufferSize.
+
+ @return Error codes from underlying functions.
+**/
+EFIAPI
+RETURN_STATUS
+QemuFwCfgS3ScriptReadBytes (
+ IN INT32 FirmwareConfigItem,
+ IN UINTN NumberOfBytes
+ )
+{
+ EFI_STATUS Status;
+ UINT64 AccessAddress;
+ UINT32 ControlPollData;
+ UINT32 ControlPollMask;
+
+ ASSERT (mDmaAccess != NULL);
+ ASSERT (mS3SaveState != NULL);
+
+ if (FirmwareConfigItem < -1 || FirmwareConfigItem > MAX_UINT16) {
+ return RETURN_INVALID_PARAMETER;
+ }
+ if (NumberOfBytes > mScratchBufferSize) {
+ return RETURN_BAD_BUFFER_SIZE;
+ }
+
+ //
+ // Set up a read[+select] fw_cfg DMA command.
+ //
+ mDmaAccess->Control = FW_CFG_DMA_CTL_READ;
+ if (FirmwareConfigItem != -1) {
+ mDmaAccess->Control |= FW_CFG_DMA_CTL_SELECT;
+ mDmaAccess->Control |= (UINT32)FirmwareConfigItem << 16;
+ }
+ mDmaAccess->Control = SwapBytes32 (mDmaAccess->Control);
+
+ //
+ // We ensured the following constraint via mScratchBufferSize in
+ // QemuFwCfgS3CallWhenBootScriptReady().
+ //
+ ASSERT (NumberOfBytes <= MAX_UINT32);
+ mDmaAccess->Length = SwapBytes32 ((UINT32)NumberOfBytes);
+
+ mDmaAccess->Address = SwapBytes64 ((UINTN)mScratchBuffer);
+
+ //
+ // Copy mDmaAccess into the boot script. When executed at S3 resume, this
+ // opcode will restore it in-place.
+ //
+ Status = mS3SaveState->Write (
+ mS3SaveState, // This
+ EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE, // OpCode
+ EfiBootScriptWidthUint8, // Width
+ (UINT64)(UINTN)mDmaAccess, // Address
+ sizeof *mDmaAccess, // Count
+ (VOID *)mDmaAccess // Buffer
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE: %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ return (RETURN_STATUS)Status;
+ }
+
+ //
+ // Append an opcode that will write the address of the fw_cfg DMA command to
+ // the fw_cfg DMA address register, which consists of two 32-bit IO ports.
+ // The second (highest address, least significant) write will start the
+ // transfer.
+ //
+ AccessAddress = SwapBytes64 ((UINTN)mDmaAccess);
+ Status = mS3SaveState->Write (
+ mS3SaveState, // This
+ EFI_BOOT_SCRIPT_IO_WRITE_OPCODE, // OpCode
+ EfiBootScriptWidthUint32, // Width
+ (UINT64)FW_CFG_IO_DMA_ADDRESS, // Address
+ (UINTN)2, // Count
+ (VOID *)&AccessAddress // Buffer
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: EFI_BOOT_SCRIPT_IO_WRITE_OPCODE: %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ return (RETURN_STATUS)Status;
+ }
+
+ //
+ // The following opcode will wait until the Control word reads as zero
+ // (transfer complete). As timeout we use MAX_UINT64 * 100ns, which is
+ // approximately 58494 years.
+ //
+ ControlPollData = 0;
+ ControlPollMask = MAX_UINT32;
+ Status = mS3SaveState->Write (
+ mS3SaveState, // This
+ EFI_BOOT_SCRIPT_MEM_POLL_OPCODE, // OpCode
+ EfiBootScriptWidthUint32, // Width
+ (UINT64)(UINTN)&mDmaAccess->Control, // Address
+ (VOID *)&ControlPollData, // Data
+ (VOID *)&ControlPollMask, // DataMask
+ MAX_UINT64 // Delay
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: EFI_BOOT_SCRIPT_MEM_POLL_OPCODE: %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ return (RETURN_STATUS)Status;
+ }
+
+ return RETURN_SUCCESS;
+}
+
+
+/**
+ Produce ACPI S3 Boot Script opcodes that (optionally) select an fw_cfg item,
+ and increase its offset.
+
+ If the operation fails during S3 resume, the boot script will hang.
+
+ This function may only be called from the client module's
+ FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady() as Callback.
+
+ @param[in] FirmwareConfigItem The UINT16 selector key of the firmware config
+ item to advance the offset of, expressed as
+ INT32. If FirmwareConfigItem is -1, no
+ selection is made, and the offset for the
+ currently selected item is increased.
+ Otherwise, the specified item will be
+ selected, and the offset increment will occur
+ from offset 0.
+
+ @param[in] NumberOfBytes The number of bytes to skip in the subject
+ fw_cfg item.
+
+ @retval RETURN_SUCCESS The opcodes were appended to the ACPI S3
+ Boot Script successfully. There is no way
+ to undo this action.
+
+ @retval RETURN_INVALID_PARAMETER FirmwareConfigItem is invalid.
+
+ @retval RETURN_BAD_BUFFER_SIZE NumberOfBytes is too large.
+
+ @return Error codes from underlying functions.
+**/
+EFIAPI
+RETURN_STATUS
+QemuFwCfgS3ScriptSkipBytes (
+ IN INT32 FirmwareConfigItem,
+ IN UINTN NumberOfBytes
+ )
+{
+ EFI_STATUS Status;
+ UINT64 AccessAddress;
+ UINT32 ControlPollData;
+ UINT32 ControlPollMask;
+
+ ASSERT (mDmaAccess != NULL);
+ ASSERT (mS3SaveState != NULL);
+
+ if (FirmwareConfigItem < -1 || FirmwareConfigItem > MAX_UINT16) {
+ return RETURN_INVALID_PARAMETER;
+ }
+ if (NumberOfBytes > MAX_UINT32) {
+ return RETURN_BAD_BUFFER_SIZE;
+ }
+
+ //
+ // Set up a skip[+select] fw_cfg DMA command.
+ //
+ mDmaAccess->Control = FW_CFG_DMA_CTL_SKIP;
+ if (FirmwareConfigItem != -1) {
+ mDmaAccess->Control |= FW_CFG_DMA_CTL_SELECT;
+ mDmaAccess->Control |= (UINT32)FirmwareConfigItem << 16;
+ }
+ mDmaAccess->Control = SwapBytes32 (mDmaAccess->Control);
+
+ mDmaAccess->Length = SwapBytes32 ((UINT32)NumberOfBytes);
+ mDmaAccess->Address = 0;
+
+ //
+ // Copy mDmaAccess into the boot script. When executed at S3 resume, this
+ // opcode will restore it in-place.
+ //
+ Status = mS3SaveState->Write (
+ mS3SaveState, // This
+ EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE, // OpCode
+ EfiBootScriptWidthUint8, // Width
+ (UINT64)(UINTN)mDmaAccess, // Address
+ sizeof *mDmaAccess, // Count
+ (VOID *)mDmaAccess // Buffer
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE: %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ return (RETURN_STATUS)Status;
+ }
+
+ //
+ // Append an opcode that will write the address of the fw_cfg DMA command to
+ // the fw_cfg DMA address register, which consists of two 32-bit IO ports.
+ // The second (highest address, least significant) write will start the
+ // transfer.
+ //
+ AccessAddress = SwapBytes64 ((UINTN)mDmaAccess);
+ Status = mS3SaveState->Write (
+ mS3SaveState, // This
+ EFI_BOOT_SCRIPT_IO_WRITE_OPCODE, // OpCode
+ EfiBootScriptWidthUint32, // Width
+ (UINT64)FW_CFG_IO_DMA_ADDRESS, // Address
+ (UINTN)2, // Count
+ (VOID *)&AccessAddress // Buffer
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: EFI_BOOT_SCRIPT_IO_WRITE_OPCODE: %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ return (RETURN_STATUS)Status;
+ }
+
+ //
+ // The following opcode will wait until the Control word reads as zero
+ // (transfer complete). As timeout we use MAX_UINT64 * 100ns, which is
+ // approximately 58494 years.
+ //
+ ControlPollData = 0;
+ ControlPollMask = MAX_UINT32;
+ Status = mS3SaveState->Write (
+ mS3SaveState, // This
+ EFI_BOOT_SCRIPT_MEM_POLL_OPCODE, // OpCode
+ EfiBootScriptWidthUint32, // Width
+ (UINT64)(UINTN)&mDmaAccess->Control, // Address
+ (VOID *)&ControlPollData, // Data
+ (VOID *)&ControlPollMask, // DataMask
+ MAX_UINT64 // Delay
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: EFI_BOOT_SCRIPT_MEM_POLL_OPCODE: %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ return (RETURN_STATUS)Status;
+ }
+
+ return RETURN_SUCCESS;
+}
+
+
+/**
+ Produce ACPI S3 Boot Script opcodes that check a value in ScratchBuffer.
+
+ If the check fails during S3 resume, the boot script will hang.
+
+ This function may only be called from the client module's
+ FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady() as Callback.
+
+ @param[in] ScratchData Pointer to the UINT8, UINT16, UINT32 or UINT64 field
+ in ScratchBuffer that should be checked. The caller
+ is responsible for populating the field during S3
+ resume, by calling QemuFwCfgS3ScriptReadBytes() ahead
+ of QemuFwCfgS3ScriptCheckValue().
+
+ ScratchData must point into ScratchBuffer, which was
+ allocated, and passed to Callback(), by
+ QemuFwCfgS3CallWhenBootScriptReady().
+
+ ScratchData must be aligned at ValueSize bytes.
+
+ @param[in] ValueSize One of 1, 2, 4 or 8, specifying the size of the field
+ to check.
+
+ @param[in] ValueMask The value read from ScratchData is binarily AND-ed
+ with ValueMask, and the result is compared against
+ Value. If the masked data equals Value, the check
+ passes, and the boot script can proceed. Otherwise,
+ the check fails, and the boot script hangs.
+
+ @param[in] Value Refer to ValueMask.
+
+ @retval RETURN_SUCCESS The opcodes were appended to the ACPI S3
+ Boot Script successfully. There is no way
+ to undo this action.
+
+ @retval RETURN_INVALID_PARAMETER ValueSize is invalid.
+
+ @retval RETURN_INVALID_PARAMETER ValueMask or Value cannot be represented in
+ ValueSize bytes.
+
+ @retval RETURN_INVALID_PARAMETER ScratchData is not aligned at ValueSize
+ bytes.
+
+ @retval RETURN_BAD_BUFFER_SIZE The ValueSize bytes at ScratchData aren't
+ wholly contained in the ScratchBufferSize
+ bytes at ScratchBuffer.
+
+ @return Error codes from underlying functions.
+**/
+EFIAPI
+RETURN_STATUS
+QemuFwCfgS3ScriptCheckValue (
+ IN VOID *ScratchData,
+ IN UINT8 ValueSize,
+ IN UINT64 ValueMask,
+ IN UINT64 Value
+ )
+{
+ EFI_BOOT_SCRIPT_WIDTH Width;
+ EFI_STATUS Status;
+
+ ASSERT (mS3SaveState != NULL);
+
+ switch (ValueSize) {
+ case 1:
+ Width = EfiBootScriptWidthUint8;
+ break;
+
+ case 2:
+ Width = EfiBootScriptWidthUint16;
+ break;
+
+ case 4:
+ Width = EfiBootScriptWidthUint32;
+ break;
+
+ case 8:
+ Width = EfiBootScriptWidthUint64;
+ break;
+
+ default:
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ if (ValueSize < 8 &&
+ (RShiftU64 (ValueMask, ValueSize * 8) > 0 ||
+ RShiftU64 (Value, ValueSize * 8) > 0)) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ if ((UINTN)ScratchData % ValueSize > 0) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ if (((UINTN)ScratchData < (UINTN)mScratchBuffer) ||
+ ((UINTN)ScratchData > MAX_UINTN - ValueSize) ||
+ ((UINTN)ScratchData + ValueSize >
+ (UINTN)mScratchBuffer + mScratchBufferSize)) {
+ return RETURN_BAD_BUFFER_SIZE;
+ }
+
+ //
+ // The following opcode will wait "until" (*ScratchData & ValueMask) reads as
+ // Value, considering the least significant ValueSize bytes. As timeout we
+ // use MAX_UINT64 * 100ns, which is approximately 58494 years.
+ //
+ Status = mS3SaveState->Write (
+ mS3SaveState, // This
+ EFI_BOOT_SCRIPT_MEM_POLL_OPCODE, // OpCode
+ Width, // Width
+ (UINT64)(UINTN)ScratchData, // Address
+ (VOID *)&Value, // Data
+ (VOID *)&ValueMask, // DataMask
+ MAX_UINT64 // Delay
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %a: EFI_BOOT_SCRIPT_MEM_POLL_OPCODE: %r\n",
+ gEfiCallerBaseName, __FUNCTION__, Status));
+ return (RETURN_STATUS)Status;
+ }
+
+ return RETURN_SUCCESS;
+}
--
2.9.3
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2024 Red Hat, Inc.