If UTMI connected to USB Device, the MUX must be configured
prior to the PHY init. Add missing register update in the
relevant code.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
 Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c b/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c
index ceea74a..8ea666b 100644
--- a/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c
+++ b/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c
@@ -79,6 +79,7 @@ UtmiPhyPowerDown (
   } else {
     Data = 0x0 << UTMI_USB_CFG_DEVICE_EN_OFFSET;
   }
+  RegSet (UsbCfgAddr, Data, Mask);
 
   /* Set Test suspendm mode */
   Mask = UTMI_CTRL_STATUS0_SUSPENDM_MASK;
-- 
2.7.4


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#59700): https://edk2.groups.io/g/devel/message/59700
Mute This Topic: https://groups.io/mt/74237159/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-