[edk2] [RFC v3 02/15] OvmfPkg/ResetVector: Set C-bit when building initial page table

Brijesh Singh posted 15 patches 7 years, 6 months ago
There is a newer version of this series
[edk2] [RFC v3 02/15] OvmfPkg/ResetVector: Set C-bit when building initial page table
Posted by Brijesh Singh 7 years, 6 months ago
From: Brijesh Singh <brijesh.singh@amd.com>

SEV guest VMs have the concept of private and shared memory. Private
memory is encrypted with the guest-specific key, while shared memory
may be encrypted with hypervisor key. Certain types of memory (namely
instruction pages and guest page tables) are always treated as private
memory by the hardware. The C-bit in PTE indicate whether the page is
private or shared. The C-bit position for the PTE can be obtained from
CPUID Fn8000_001F[EBX].

When SEV is active, the BIOS is encrypted by the Qemu launch sequence,
we must set the C-bit when building the page table.


Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
---
 OvmfPkg/ResetVector/Ia32/PageTables64.asm | 70 +++++++++++++++++++-
 1 file changed, 69 insertions(+), 1 deletion(-)

diff --git a/OvmfPkg/ResetVector/Ia32/PageTables64.asm b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
index 6201cad1f5dc..3d4b04844cdf 100644
--- a/OvmfPkg/ResetVector/Ia32/PageTables64.asm
+++ b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
@@ -37,9 +37,60 @@ BITS    32
                        PAGE_READ_WRITE + \
                        PAGE_PRESENT)
 
+; Check if Secure Encrypted Virtualization (SEV) feature is enabled
+;
+; If SEV is enabled then EAX will be at least 32
+; If SEV is disabled then EAX will be zero.
+;
+CheckSevFeature:
+    ; CPUID will clobber EBX, ECX, EDX, save these registers
+    push  ebx
+    push  ecx
+    push  edx
+
+    ; Check if we have a valid (0x8000_001F) CPUID leaf
+    mov       eax, 0x80000000
+    cpuid
+
+    ; This check should fail on Intel or Non SEV AMD CPUs and in future if
+    ; Intel CPUs supports this CPUID leaf then we are guranteed to have exact
+    ; same bit definition.
+    cmp       eax, 0x8000001f
+    jl        NoSev
+
+    ; Check for memory encryption feature:
+    ;  CPUID  Fn8000_001F[EAX] - Bit 1
+    ;
+    mov       eax,  0x8000001f
+    cpuid
+    bt        eax, 1
+    jnc       NoSev
+
+    ; Check if memory encryption is enabled
+    ;  MSR_0xC0010131 - Bit 0 (SEV enabled)
+    mov       ecx, 0xc0010131
+    rdmsr
+    bt        eax, 0
+    jnc       NoSev
+
+    ; Get pte bit position to enable memory encryption
+    ; CPUID Fn8000_001F[EBX] - Bits 5:0
+    ;
+    mov       eax, ebx
+    and       eax, 0x3f
+    jmp       SevExit
+
+NoSev:
+    xor       eax, eax
+
+SevExit:
+    pop       edx
+    pop       ecx
+    pop       ebx
+    OneTimeCallRet CheckSevFeature
 
 ;
-; Modified:  EAX, ECX
+; Modified:  EAX, ECX, EDX
 ;
 SetCr3ForPageTables64:
 
@@ -60,18 +111,34 @@ clearPageTablesMemoryLoop:
     mov     dword[ecx * 4 + PT_ADDR (0) - 4], eax
     loop    clearPageTablesMemoryLoop
 
+    OneTimeCall   CheckSevFeature
+    xor     edx, edx
+    test    eax, eax
+    jz      SevNotActive
+
+    ; If SEV is enabled, Memory encryption bit is always above 31
+    sub     eax, 32
+    bts     edx, eax
+
+SevNotActive:
+
     ;
     ; Top level Page Directory Pointers (1 * 512GB entry)
     ;
     mov     dword[PT_ADDR (0)], PT_ADDR (0x1000) + PAGE_PDP_ATTR
+    mov     dword[PT_ADDR (4)], edx
 
     ;
     ; Next level Page Directory Pointers (4 * 1GB entries => 4GB)
     ;
     mov     dword[PT_ADDR (0x1000)], PT_ADDR (0x2000) + PAGE_PDP_ATTR
+    mov     dword[PT_ADDR (0x1004)], edx
     mov     dword[PT_ADDR (0x1008)], PT_ADDR (0x3000) + PAGE_PDP_ATTR
+    mov     dword[PT_ADDR (0x100C)], edx
     mov     dword[PT_ADDR (0x1010)], PT_ADDR (0x4000) + PAGE_PDP_ATTR
+    mov     dword[PT_ADDR (0x1014)], edx
     mov     dword[PT_ADDR (0x1018)], PT_ADDR (0x5000) + PAGE_PDP_ATTR
+    mov     dword[PT_ADDR (0x101C)], edx
 
     ;
     ; Page Table Entries (2048 * 2MB entries => 4GB)
@@ -83,6 +150,7 @@ pageTableEntriesLoop:
     shl     eax, 21
     add     eax, PAGE_2M_PDE_ATTR
     mov     [ecx * 8 + PT_ADDR (0x2000 - 8)], eax
+    mov     [(ecx * 8 + PT_ADDR (0x2000 - 8)) + 4], edx
     loop    pageTableEntriesLoop
 
     ;
-- 
2.7.4

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel