MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c | 85 ++++++++------------ 1 file changed, 35 insertions(+), 50 deletions(-)
Currently, the PE/COFF image memory protection code uses the same code
paths for protecting and unprotecting an image. This is strange, since
unprotecting an image involves a single call into the CPU arch protocol
to clear the permission attributes of the entire range, and there is no
need to parse the PE/COFF headers again.
So let's store the ImageRecord entries in a linked list, so we can find
it again at unprotect time, and simply clear the permissions.
Note that this fixes a DEBUG hang on an ASSERT() that occurs when the
PE/COFF image fails to load, which causes UnprotectUefiImage() to be
invoked before the image is fully loaded.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
This is an alternative fix for the issue addressed by patch
'MdeModulePkg/DxeCore: ignore PdbPointer if ImageAddress == 0'
(https://lists.01.org/pipermail/edk2-devel/2017-March/008766.html)
MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c | 85 ++++++++------------
1 file changed, 35 insertions(+), 50 deletions(-)
diff --git a/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c b/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
index 451cc35b9290..93f96f0c9502 100644
--- a/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
+++ b/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
@@ -74,6 +74,8 @@ UINT32 mImageProtectionPolicy;
extern LIST_ENTRY mGcdMemorySpaceMap;
+STATIC LIST_ENTRY mProtectedImageRecordList;
+
/**
Sort code section in image record, based upon CodeSegmentBase from low to high.
@@ -238,13 +240,10 @@ SetUefiImageMemoryAttributes (
Set UEFI image protection attributes.
@param[in] ImageRecord A UEFI image record
- @param[in] Protect TRUE: Protect the UEFI image.
- FALSE: Unprotect the UEFI image.
**/
VOID
SetUefiImageProtectionAttributes (
- IN IMAGE_PROPERTIES_RECORD *ImageRecord,
- IN BOOLEAN Protect
+ IN IMAGE_PROPERTIES_RECORD *ImageRecord
)
{
IMAGE_PROPERTIES_RECORD_CODE_SECTION *ImageRecordCodeSection;
@@ -253,7 +252,6 @@ SetUefiImageProtectionAttributes (
LIST_ENTRY *ImageRecordCodeSectionList;
UINT64 CurrentBase;
UINT64 ImageEnd;
- UINT64 Attribute;
ImageRecordCodeSectionList = &ImageRecord->CodeSegmentList;
@@ -276,29 +274,19 @@ SetUefiImageProtectionAttributes (
//
// DATA
//
- if (Protect) {
- Attribute = EFI_MEMORY_XP;
- } else {
- Attribute = 0;
- }
SetUefiImageMemoryAttributes (
CurrentBase,
ImageRecordCodeSection->CodeSegmentBase - CurrentBase,
- Attribute
+ EFI_MEMORY_XP
);
}
//
// CODE
//
- if (Protect) {
- Attribute = EFI_MEMORY_RO;
- } else {
- Attribute = 0;
- }
SetUefiImageMemoryAttributes (
ImageRecordCodeSection->CodeSegmentBase,
ImageRecordCodeSection->CodeSegmentSize,
- Attribute
+ EFI_MEMORY_RO
);
CurrentBase = ImageRecordCodeSection->CodeSegmentBase + ImageRecordCodeSection->CodeSegmentSize;
}
@@ -310,15 +298,10 @@ SetUefiImageProtectionAttributes (
//
// DATA
//
- if (Protect) {
- Attribute = EFI_MEMORY_XP;
- } else {
- Attribute = 0;
- }
SetUefiImageMemoryAttributes (
CurrentBase,
ImageEnd - CurrentBase,
- Attribute
+ EFI_MEMORY_XP
);
}
return ;
@@ -401,18 +384,15 @@ FreeImageRecord (
}
/**
- Protect or unprotect UEFI image common function.
+ Protect UEFI PE/COFF image
@param[in] LoadedImage The loaded image protocol
@param[in] LoadedImageDevicePath The loaded image device path protocol
- @param[in] Protect TRUE: Protect the UEFI image.
- FALSE: Unprotect the UEFI image.
**/
VOID
-ProtectUefiImageCommon (
+ProtectUefiImage (
IN EFI_LOADED_IMAGE_PROTOCOL *LoadedImage,
- IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath,
- IN BOOLEAN Protect
+ IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath
)
{
VOID *ImageAddress;
@@ -617,35 +597,18 @@ ProtectUefiImageCommon (
//
// CPU ARCH present. Update memory attribute directly.
//
- SetUefiImageProtectionAttributes (ImageRecord, Protect);
+ SetUefiImageProtectionAttributes (ImageRecord);
//
- // Clean up
+ // Record the image record in the list so we can undo the protections later
//
- FreeImageRecord (ImageRecord);
+ InsertTailList (&mProtectedImageRecordList, &ImageRecord->Link);
Finish:
return ;
}
/**
- Protect UEFI image.
-
- @param[in] LoadedImage The loaded image protocol
- @param[in] LoadedImageDevicePath The loaded image device path protocol
-**/
-VOID
-ProtectUefiImage (
- IN EFI_LOADED_IMAGE_PROTOCOL *LoadedImage,
- IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath
- )
-{
- if (PcdGet32(PcdImageProtectionPolicy) != 0) {
- ProtectUefiImageCommon (LoadedImage, LoadedImageDevicePath, TRUE);
- }
-}
-
-/**
Unprotect UEFI image.
@param[in] LoadedImage The loaded image protocol
@@ -657,8 +620,28 @@ UnprotectUefiImage (
IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath
)
{
+ IMAGE_PROPERTIES_RECORD *ImageRecord;
+ LIST_ENTRY *ImageRecordLink;
+
if (PcdGet32(PcdImageProtectionPolicy) != 0) {
- ProtectUefiImageCommon (LoadedImage, LoadedImageDevicePath, FALSE);
+ for (ImageRecordLink = mProtectedImageRecordList.ForwardLink;
+ ImageRecordLink != &mProtectedImageRecordList;
+ ImageRecordLink = ImageRecordLink->ForwardLink) {
+ ImageRecord = CR (
+ ImageRecordLink,
+ IMAGE_PROPERTIES_RECORD,
+ Link,
+ IMAGE_PROPERTIES_RECORD_SIGNATURE
+ );
+
+ if (ImageRecord->ImageBase == (EFI_PHYSICAL_ADDRESS)(UINTN)LoadedImage->ImageBase) {
+ SetUefiImageMemoryAttributes (ImageRecord->ImageBase,
+ ImageRecord->ImageSize,
+ 0);
+ FreeImageRecord (ImageRecord);
+ return;
+ }
+ }
}
}
@@ -1027,6 +1010,8 @@ CoreInitializeMemoryProtection (
mImageProtectionPolicy = PcdGet32(PcdImageProtectionPolicy);
+ InitializeListHead (&mProtectedImageRecordList);
+
//
// Sanity check the PcdDxeNxMemoryProtectionPolicy setting:
// - code regions should have no EFI_MEMORY_XP attribute
--
2.7.4
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Good idea.
Reviewed-by: Jiewen.yao@Intel.com
> -----Original Message-----
> From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
> Sent: Tuesday, March 21, 2017 9:49 PM
> To: edk2-devel@lists.01.org; Yao, Jiewen <jiewen.yao@intel.com>
> Cc: Zeng, Star <star.zeng@intel.com>; Tian, Feng <feng.tian@intel.com>; Gao,
> Liming <liming.gao@intel.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Subject: [PATCH] MdeModulePkg/MemoryProtection: split protect and
> unprotect paths
>
> Currently, the PE/COFF image memory protection code uses the same code
> paths for protecting and unprotecting an image. This is strange, since
> unprotecting an image involves a single call into the CPU arch protocol
> to clear the permission attributes of the entire range, and there is no
> need to parse the PE/COFF headers again.
>
> So let's store the ImageRecord entries in a linked list, so we can find
> it again at unprotect time, and simply clear the permissions.
>
> Note that this fixes a DEBUG hang on an ASSERT() that occurs when the
> PE/COFF image fails to load, which causes UnprotectUefiImage() to be
> invoked before the image is fully loaded.
>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
>
> This is an alternative fix for the issue addressed by patch
>
> 'MdeModulePkg/DxeCore: ignore PdbPointer if ImageAddress == 0'
>
> (https://lists.01.org/pipermail/edk2-devel/2017-March/008766.html)
>
> MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c | 85 ++++++++------------
> 1 file changed, 35 insertions(+), 50 deletions(-)
>
> diff --git a/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
> b/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
> index 451cc35b9290..93f96f0c9502 100644
> --- a/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
> +++ b/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
> @@ -74,6 +74,8 @@ UINT32 mImageProtectionPolicy;
>
> extern LIST_ENTRY mGcdMemorySpaceMap;
>
> +STATIC LIST_ENTRY mProtectedImageRecordList;
> +
> /**
> Sort code section in image record, based upon CodeSegmentBase from low to
> high.
>
> @@ -238,13 +240,10 @@ SetUefiImageMemoryAttributes (
> Set UEFI image protection attributes.
>
> @param[in] ImageRecord A UEFI image record
> - @param[in] Protect TRUE: Protect the UEFI image.
> - FALSE: Unprotect the UEFI image.
> **/
> VOID
> SetUefiImageProtectionAttributes (
> - IN IMAGE_PROPERTIES_RECORD *ImageRecord,
> - IN BOOLEAN Protect
> + IN IMAGE_PROPERTIES_RECORD *ImageRecord
> )
> {
> IMAGE_PROPERTIES_RECORD_CODE_SECTION
> *ImageRecordCodeSection;
> @@ -253,7 +252,6 @@ SetUefiImageProtectionAttributes (
> LIST_ENTRY
> *ImageRecordCodeSectionList;
> UINT64 CurrentBase;
> UINT64 ImageEnd;
> - UINT64 Attribute;
>
> ImageRecordCodeSectionList = &ImageRecord->CodeSegmentList;
>
> @@ -276,29 +274,19 @@ SetUefiImageProtectionAttributes (
> //
> // DATA
> //
> - if (Protect) {
> - Attribute = EFI_MEMORY_XP;
> - } else {
> - Attribute = 0;
> - }
> SetUefiImageMemoryAttributes (
> CurrentBase,
> ImageRecordCodeSection->CodeSegmentBase - CurrentBase,
> - Attribute
> + EFI_MEMORY_XP
> );
> }
> //
> // CODE
> //
> - if (Protect) {
> - Attribute = EFI_MEMORY_RO;
> - } else {
> - Attribute = 0;
> - }
> SetUefiImageMemoryAttributes (
> ImageRecordCodeSection->CodeSegmentBase,
> ImageRecordCodeSection->CodeSegmentSize,
> - Attribute
> + EFI_MEMORY_RO
> );
> CurrentBase = ImageRecordCodeSection->CodeSegmentBase +
> ImageRecordCodeSection->CodeSegmentSize;
> }
> @@ -310,15 +298,10 @@ SetUefiImageProtectionAttributes (
> //
> // DATA
> //
> - if (Protect) {
> - Attribute = EFI_MEMORY_XP;
> - } else {
> - Attribute = 0;
> - }
> SetUefiImageMemoryAttributes (
> CurrentBase,
> ImageEnd - CurrentBase,
> - Attribute
> + EFI_MEMORY_XP
> );
> }
> return ;
> @@ -401,18 +384,15 @@ FreeImageRecord (
> }
>
> /**
> - Protect or unprotect UEFI image common function.
> + Protect UEFI PE/COFF image
>
> @param[in] LoadedImage The loaded image protocol
> @param[in] LoadedImageDevicePath The loaded image device path
> protocol
> - @param[in] Protect TRUE: Protect the UEFI image.
> - FALSE: Unprotect the UEFI image.
> **/
> VOID
> -ProtectUefiImageCommon (
> +ProtectUefiImage (
> IN EFI_LOADED_IMAGE_PROTOCOL *LoadedImage,
> - IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath,
> - IN BOOLEAN Protect
> + IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath
> )
> {
> VOID *ImageAddress;
> @@ -617,35 +597,18 @@ ProtectUefiImageCommon (
> //
> // CPU ARCH present. Update memory attribute directly.
> //
> - SetUefiImageProtectionAttributes (ImageRecord, Protect);
> + SetUefiImageProtectionAttributes (ImageRecord);
>
> //
> - // Clean up
> + // Record the image record in the list so we can undo the protections later
> //
> - FreeImageRecord (ImageRecord);
> + InsertTailList (&mProtectedImageRecordList, &ImageRecord->Link);
>
> Finish:
> return ;
> }
>
> /**
> - Protect UEFI image.
> -
> - @param[in] LoadedImage The loaded image protocol
> - @param[in] LoadedImageDevicePath The loaded image device path
> protocol
> -**/
> -VOID
> -ProtectUefiImage (
> - IN EFI_LOADED_IMAGE_PROTOCOL *LoadedImage,
> - IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath
> - )
> -{
> - if (PcdGet32(PcdImageProtectionPolicy) != 0) {
> - ProtectUefiImageCommon (LoadedImage, LoadedImageDevicePath,
> TRUE);
> - }
> -}
> -
> -/**
> Unprotect UEFI image.
>
> @param[in] LoadedImage The loaded image protocol
> @@ -657,8 +620,28 @@ UnprotectUefiImage (
> IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath
> )
> {
> + IMAGE_PROPERTIES_RECORD *ImageRecord;
> + LIST_ENTRY *ImageRecordLink;
> +
> if (PcdGet32(PcdImageProtectionPolicy) != 0) {
> - ProtectUefiImageCommon (LoadedImage, LoadedImageDevicePath,
> FALSE);
> + for (ImageRecordLink = mProtectedImageRecordList.ForwardLink;
> + ImageRecordLink != &mProtectedImageRecordList;
> + ImageRecordLink = ImageRecordLink->ForwardLink) {
> + ImageRecord = CR (
> + ImageRecordLink,
> + IMAGE_PROPERTIES_RECORD,
> + Link,
> + IMAGE_PROPERTIES_RECORD_SIGNATURE
> + );
> +
> + if (ImageRecord->ImageBase ==
> (EFI_PHYSICAL_ADDRESS)(UINTN)LoadedImage->ImageBase) {
> + SetUefiImageMemoryAttributes (ImageRecord->ImageBase,
> + ImageRecord->ImageSize,
> + 0);
> + FreeImageRecord (ImageRecord);
> + return;
> + }
> + }
> }
> }
>
> @@ -1027,6 +1010,8 @@ CoreInitializeMemoryProtection (
>
> mImageProtectionPolicy = PcdGet32(PcdImageProtectionPolicy);
>
> + InitializeListHead (&mProtectedImageRecordList);
> +
> //
> // Sanity check the PcdDxeNxMemoryProtectionPolicy setting:
> // - code regions should have no EFI_MEMORY_XP attribute
> --
> 2.7.4
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
On 21 March 2017 at 14:14, Yao, Jiewen <jiewen.yao@intel.com> wrote:
> Good idea.
>
> Reviewed-by: Jiewen.yao@Intel.com
>
Pushed, thanks.
>
>
>> -----Original Message-----
>> From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
>> Sent: Tuesday, March 21, 2017 9:49 PM
>> To: edk2-devel@lists.01.org; Yao, Jiewen <jiewen.yao@intel.com>
>> Cc: Zeng, Star <star.zeng@intel.com>; Tian, Feng <feng.tian@intel.com>; Gao,
>> Liming <liming.gao@intel.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> Subject: [PATCH] MdeModulePkg/MemoryProtection: split protect and
>> unprotect paths
>>
>> Currently, the PE/COFF image memory protection code uses the same code
>> paths for protecting and unprotecting an image. This is strange, since
>> unprotecting an image involves a single call into the CPU arch protocol
>> to clear the permission attributes of the entire range, and there is no
>> need to parse the PE/COFF headers again.
>>
>> So let's store the ImageRecord entries in a linked list, so we can find
>> it again at unprotect time, and simply clear the permissions.
>>
>> Note that this fixes a DEBUG hang on an ASSERT() that occurs when the
>> PE/COFF image fails to load, which causes UnprotectUefiImage() to be
>> invoked before the image is fully loaded.
>>
>> Contributed-under: TianoCore Contribution Agreement 1.0
>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> ---
>>
>> This is an alternative fix for the issue addressed by patch
>>
>> 'MdeModulePkg/DxeCore: ignore PdbPointer if ImageAddress == 0'
>>
>> (https://lists.01.org/pipermail/edk2-devel/2017-March/008766.html)
>>
>> MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c | 85 ++++++++------------
>> 1 file changed, 35 insertions(+), 50 deletions(-)
>>
>> diff --git a/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
>> b/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
>> index 451cc35b9290..93f96f0c9502 100644
>> --- a/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
>> +++ b/MdeModulePkg/Core/Dxe/Misc/MemoryProtection.c
>> @@ -74,6 +74,8 @@ UINT32 mImageProtectionPolicy;
>>
>> extern LIST_ENTRY mGcdMemorySpaceMap;
>>
>> +STATIC LIST_ENTRY mProtectedImageRecordList;
>> +
>> /**
>> Sort code section in image record, based upon CodeSegmentBase from low to
>> high.
>>
>> @@ -238,13 +240,10 @@ SetUefiImageMemoryAttributes (
>> Set UEFI image protection attributes.
>>
>> @param[in] ImageRecord A UEFI image record
>> - @param[in] Protect TRUE: Protect the UEFI image.
>> - FALSE: Unprotect the UEFI image.
>> **/
>> VOID
>> SetUefiImageProtectionAttributes (
>> - IN IMAGE_PROPERTIES_RECORD *ImageRecord,
>> - IN BOOLEAN Protect
>> + IN IMAGE_PROPERTIES_RECORD *ImageRecord
>> )
>> {
>> IMAGE_PROPERTIES_RECORD_CODE_SECTION
>> *ImageRecordCodeSection;
>> @@ -253,7 +252,6 @@ SetUefiImageProtectionAttributes (
>> LIST_ENTRY
>> *ImageRecordCodeSectionList;
>> UINT64 CurrentBase;
>> UINT64 ImageEnd;
>> - UINT64 Attribute;
>>
>> ImageRecordCodeSectionList = &ImageRecord->CodeSegmentList;
>>
>> @@ -276,29 +274,19 @@ SetUefiImageProtectionAttributes (
>> //
>> // DATA
>> //
>> - if (Protect) {
>> - Attribute = EFI_MEMORY_XP;
>> - } else {
>> - Attribute = 0;
>> - }
>> SetUefiImageMemoryAttributes (
>> CurrentBase,
>> ImageRecordCodeSection->CodeSegmentBase - CurrentBase,
>> - Attribute
>> + EFI_MEMORY_XP
>> );
>> }
>> //
>> // CODE
>> //
>> - if (Protect) {
>> - Attribute = EFI_MEMORY_RO;
>> - } else {
>> - Attribute = 0;
>> - }
>> SetUefiImageMemoryAttributes (
>> ImageRecordCodeSection->CodeSegmentBase,
>> ImageRecordCodeSection->CodeSegmentSize,
>> - Attribute
>> + EFI_MEMORY_RO
>> );
>> CurrentBase = ImageRecordCodeSection->CodeSegmentBase +
>> ImageRecordCodeSection->CodeSegmentSize;
>> }
>> @@ -310,15 +298,10 @@ SetUefiImageProtectionAttributes (
>> //
>> // DATA
>> //
>> - if (Protect) {
>> - Attribute = EFI_MEMORY_XP;
>> - } else {
>> - Attribute = 0;
>> - }
>> SetUefiImageMemoryAttributes (
>> CurrentBase,
>> ImageEnd - CurrentBase,
>> - Attribute
>> + EFI_MEMORY_XP
>> );
>> }
>> return ;
>> @@ -401,18 +384,15 @@ FreeImageRecord (
>> }
>>
>> /**
>> - Protect or unprotect UEFI image common function.
>> + Protect UEFI PE/COFF image
>>
>> @param[in] LoadedImage The loaded image protocol
>> @param[in] LoadedImageDevicePath The loaded image device path
>> protocol
>> - @param[in] Protect TRUE: Protect the UEFI image.
>> - FALSE: Unprotect the UEFI image.
>> **/
>> VOID
>> -ProtectUefiImageCommon (
>> +ProtectUefiImage (
>> IN EFI_LOADED_IMAGE_PROTOCOL *LoadedImage,
>> - IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath,
>> - IN BOOLEAN Protect
>> + IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath
>> )
>> {
>> VOID *ImageAddress;
>> @@ -617,35 +597,18 @@ ProtectUefiImageCommon (
>> //
>> // CPU ARCH present. Update memory attribute directly.
>> //
>> - SetUefiImageProtectionAttributes (ImageRecord, Protect);
>> + SetUefiImageProtectionAttributes (ImageRecord);
>>
>> //
>> - // Clean up
>> + // Record the image record in the list so we can undo the protections later
>> //
>> - FreeImageRecord (ImageRecord);
>> + InsertTailList (&mProtectedImageRecordList, &ImageRecord->Link);
>>
>> Finish:
>> return ;
>> }
>>
>> /**
>> - Protect UEFI image.
>> -
>> - @param[in] LoadedImage The loaded image protocol
>> - @param[in] LoadedImageDevicePath The loaded image device path
>> protocol
>> -**/
>> -VOID
>> -ProtectUefiImage (
>> - IN EFI_LOADED_IMAGE_PROTOCOL *LoadedImage,
>> - IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath
>> - )
>> -{
>> - if (PcdGet32(PcdImageProtectionPolicy) != 0) {
>> - ProtectUefiImageCommon (LoadedImage, LoadedImageDevicePath,
>> TRUE);
>> - }
>> -}
>> -
>> -/**
>> Unprotect UEFI image.
>>
>> @param[in] LoadedImage The loaded image protocol
>> @@ -657,8 +620,28 @@ UnprotectUefiImage (
>> IN EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath
>> )
>> {
>> + IMAGE_PROPERTIES_RECORD *ImageRecord;
>> + LIST_ENTRY *ImageRecordLink;
>> +
>> if (PcdGet32(PcdImageProtectionPolicy) != 0) {
>> - ProtectUefiImageCommon (LoadedImage, LoadedImageDevicePath,
>> FALSE);
>> + for (ImageRecordLink = mProtectedImageRecordList.ForwardLink;
>> + ImageRecordLink != &mProtectedImageRecordList;
>> + ImageRecordLink = ImageRecordLink->ForwardLink) {
>> + ImageRecord = CR (
>> + ImageRecordLink,
>> + IMAGE_PROPERTIES_RECORD,
>> + Link,
>> + IMAGE_PROPERTIES_RECORD_SIGNATURE
>> + );
>> +
>> + if (ImageRecord->ImageBase ==
>> (EFI_PHYSICAL_ADDRESS)(UINTN)LoadedImage->ImageBase) {
>> + SetUefiImageMemoryAttributes (ImageRecord->ImageBase,
>> + ImageRecord->ImageSize,
>> + 0);
>> + FreeImageRecord (ImageRecord);
>> + return;
>> + }
>> + }
>> }
>> }
>>
>> @@ -1027,6 +1010,8 @@ CoreInitializeMemoryProtection (
>>
>> mImageProtectionPolicy = PcdGet32(PcdImageProtectionPolicy);
>>
>> + InitializeListHead (&mProtectedImageRecordList);
>> +
>> //
>> // Sanity check the PcdDxeNxMemoryProtectionPolicy setting:
>> // - code regions should have no EFI_MEMORY_XP attribute
>> --
>> 2.7.4
>
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2024 Red Hat, Inc.