This series adds M and HS-mode virtual interrupt and IRQ filtering support.
This allows inserting virtual interrupts from M/HS-mode into S/VS-mode
using mvien/hvien and mvip/hvip csrs. IRQ filtering is a use case of
this change, i-e M-mode can stop delegating an interrupt to S-mode and
instead enable it in MIE and receive those interrupts in M-mode and then
selectively inject the interrupt using mvien and mvip.

Also, the spec doesn't mandate the interrupt to be actually supported
in hardware. Which allows M/HS-mode to assert virtual interrupts to
S/VS-mode that have no connection to any real interrupt events.

This is defined as part of the AIA specification [0], "5.3 Interrupt
filtering and virtual interrupts for supervisor level" and "6.3.2 Virtual
interrupts for VS level".

Most of the testing is done by hacking around OpenSBI and linux host.
The changes for those can be found at [1] and [2].

It's my first touch on RISC-V qemu IRQ subsystem. Any feedback would
be much appreciated.

The change can also be found on github [3].

TODO: This change doesn't support delegating virtual interrupts injected
by M-mode to VS-mode by the Hypervisor. This is true for bits 13:63 only.

Thanks
Rajnesh

[0]: https://github.com/riscv/riscv-aia/releases/download/1.0-RC4/riscv-interrupts-1.0-RC4.pdf
[1]: https://github.com/rajnesh-kanwal/opensbi/tree/dev/rkanwal/irq_filter
[2]: https://github.com/rajnesh-kanwal/linux/commits/dev/rkanwal/aia_irq_filter
[3]: https://github.com/rajnesh-kanwal/qemu/tree/dev/rkanwal/riscv_irq_filter

v3:
 * Rebased the patches and added reviewed-by tags.

v2:
 * Move RISCV_EXCP_SEMIHOST to switch case and remove special handling.
 * Fix linux-user build.

Rajnesh Kanwal (6):
  target/riscv: Without H-mode mask all HS mode inturrupts in mie.
  target/riscv: Check for async flag in case of RISCV_EXCP_SEMIHOST.
  target/riscv: Set VS* bits to one in mideleg when H-Ext is enabled
  target/riscv: Split interrupt logic from riscv_cpu_update_mip.
  target/riscv: Add M-mode virtual interrupt and IRQ filtering support.
  target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.

 target/riscv/cpu.c        |  11 +-
 target/riscv/cpu.h        |  23 ++
 target/riscv/cpu_bits.h   |   6 +
 target/riscv/cpu_helper.c |  99 +++++---
 target/riscv/csr.c        | 477 ++++++++++++++++++++++++++++++++++----
 target/riscv/machine.c    |   6 +
 6 files changed, 547 insertions(+), 75 deletions(-)

-- 
2.34.1