.../VTd/IntelVTdDmarPei/IntelVTdDmar.c | 157 +++++++++++----- .../Feature/VTd/IntelVTdDxe/IntelVTdDxe.inf | 1 + .../Feature/VTd/IntelVTdDxe/VtdReg.c | 169 +++++++++++++----- .../Intel/IntelSiliconPkg/IntelSiliconPkg.dec | 12 +- 4 files changed, 245 insertions(+), 94 deletions(-)
In Abort DMA Mode(ADM), hardware will abort all DMA operations without
the need to set up a roottable. Enable Abort DMA Mode, when change
Translation Table Mode(TTM)
Change-Id: I74207fe96ef7a57d89a355d40dfbdd36186f06c3
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Robert Kowalewski <robert.kowalewski@intel.com>
---
.../VTd/IntelVTdDmarPei/IntelVTdDmar.c | 157 +++++++++++-----
.../Feature/VTd/IntelVTdDxe/IntelVTdDxe.inf | 1 +
.../Feature/VTd/IntelVTdDxe/VtdReg.c | 169 +++++++++++++-----
.../Intel/IntelSiliconPkg/IntelSiliconPkg.dec | 12 +-
4 files changed, 245 insertions(+), 94 deletions(-)
diff --git a/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDmarPei/IntelVTdDmar.c b/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDmarPei/IntelVTdDmar.c
index b5b78f779..24beccd26 100644
--- a/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDmarPei/IntelVTdDmar.c
+++ b/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDmarPei/IntelVTdDmar.c
@@ -361,6 +361,68 @@ InvalidateIOTLB (
return EFI_SUCCESS;
}
+/**
+ Clear Global Command Register Bits
+
+ @param[in] VtdUnitBaseAddress The base address of the VTd engine.
+ @param[in] BitMask Bit mask.
+**/
+VOID
+ClearGlobalCommandRegisterBits (
+ IN UINTN VtdUnitBaseAddress,
+ IN UINT32 BitMask
+ )
+{
+ UINT32 Reg32;
+ UINT32 Status;
+ UINT32 Command;
+
+ Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
+ Status = (Reg32 & 0x96FFFFFF); // Reset the one-shot bits
+ Command = (Status & (~BitMask));
+ MmioWrite32 (VtdUnitBaseAddress + R_GCMD_REG, Command);
+
+ DEBUG((DEBUG_INFO, "Clear GCMD_REG bits 0x%x.\n", BitMask));
+
+ //
+ // Poll on Status bit of Global status register to become zero
+ //
+ do {
+ Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
+ } while ((Reg32 & BitMask) == BitMask);
+}
+
+/**
+ Set Global Command Register Bits
+
+ @param[in] VtdUnitBaseAddress The base address of the VTd engine.
+ @param[in] BitMask Bit mask.
+**/
+VOID
+SetGlobalCommandRegisterBits (
+ IN UINTN VtdUnitBaseAddress,
+ IN UINT32 BitMask
+ )
+{
+ UINT32 Reg32;
+ UINT32 Status;
+ UINT32 Command;
+
+ Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
+ Status = (Reg32 & 0x96FFFFFF); // Reset the one-shot bits
+ Command = (Status | BitMask);
+ MmioWrite32 (VtdUnitBaseAddress + R_GCMD_REG, Command);
+
+ DEBUG((DEBUG_INFO, "Set GCMD_REG bits 0x%x.\n", BitMask));
+
+ //
+ // Poll on Status bit of Global status register to become not zero
+ //
+ do {
+ Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
+ } while ((Reg32 & BitMask) == 0);
+}
+
/**
Enable DMAR translation in pre-mem phase.
@@ -383,13 +445,10 @@ EnableDmarPreMem (
DEBUG ((DEBUG_INFO, "RTADDR_REG : 0x%016lx \n", RtaddrRegValue));
MmioWrite64 (VtdUnitBaseAddress + R_RTADDR_REG, RtaddrRegValue);
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- MmioWrite32 (VtdUnitBaseAddress + R_GCMD_REG, Reg32 | B_GMCD_REG_SRTP);
-
DEBUG ((DEBUG_INFO, "EnableDmarPreMem: waiting for RTPS bit to be set... \n"));
- do {
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- } while((Reg32 & B_GSTS_REG_RTPS) == 0);
+ SetGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_SRTP);
+
+ Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
DEBUG ((DEBUG_INFO, "EnableDmarPreMem: R_GSTS_REG = 0x%x \n", Reg32));
//
@@ -405,12 +464,7 @@ EnableDmarPreMem (
//
// Enable VTd
//
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- MmioWrite32 (VtdUnitBaseAddress + R_GCMD_REG, Reg32 | B_GMCD_REG_TE);
- DEBUG ((DEBUG_INFO, "EnableDmarPreMem: Waiting B_GSTS_REG_TE ...\n"));
- do {
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- } while ((Reg32 & B_GSTS_REG_TE) == 0);
+ SetGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_TE);
DEBUG ((DEBUG_INFO, "VTD () enabled!<<<<<<\n"));
@@ -434,22 +488,43 @@ EnableDmar (
{
UINT32 Reg32;
UINTN VtdUnitBaseAddress;
+ BOOLEAN TEWasEnabled;
VtdUnitBaseAddress = VTdUnitInfo->VtdUnitBaseAddress;
DEBUG ((DEBUG_INFO, ">>>>>>EnableDmar() for engine [%x] \n", VtdUnitBaseAddress));
- DEBUG ((DEBUG_INFO, "RootEntryTable 0x%x \n", RootEntryTable));
- MmioWrite64 (VtdUnitBaseAddress + R_RTADDR_REG, (UINT64) RootEntryTable);
+ //
+ // Check TE was enabled or not.
+ //
+ TEWasEnabled = ((MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG) & B_GSTS_REG_TE) == B_GSTS_REG_TE);
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- MmioWrite32 (VtdUnitBaseAddress + R_GCMD_REG, Reg32 | B_GMCD_REG_SRTP);
+ if (TEWasEnabled && (VTdUnitInfo->ECapReg.Bits.ADMS == 1) && PcdGetBool (PcdVTdSupportAbortDmaMode)) {
+ //
+ // For implementations reporting Enhanced SRTP Support (ESRTPS) field as
+ // Clear in the Capability register, software must not modify this field while
+ // DMA remapping is active (TES=1 in Global Status register).
+ //
+ if (VTdUnitInfo->CapReg.Bits.ESRTPS == 0) {
+ ClearGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_TE);
+ }
+
+ //
+ // Enable ADM
+ //
+ MmioWrite64 (VtdUnitBaseAddress + R_RTADDR_REG, (UINT64) (RootEntryTable | V_RTADDR_REG_TTM_ADM));
+
+ DEBUG((DEBUG_INFO, "Enable Abort DMA Mode...\n"));
+ SetGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_TE);
+
+ } else {
+ DEBUG ((DEBUG_INFO, "RootEntryTable 0x%x \n", RootEntryTable));
+ MmioWrite64 (VtdUnitBaseAddress + R_RTADDR_REG, (UINT64) RootEntryTable);
+
+ }
DEBUG ((DEBUG_INFO, "EnableDmar: waiting for RTPS bit to be set... \n"));
- do {
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- } while((Reg32 & B_GSTS_REG_RTPS) == 0);
- DEBUG ((DEBUG_INFO, "EnableDmar: R_GSTS_REG = 0x%x \n", Reg32));
+ SetGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_SRTP);
//
// Init DMAr Fault Event and Data registers
@@ -471,15 +546,19 @@ EnableDmar (
//
InvalidateIOTLB (VTdUnitInfo);
+ if (TEWasEnabled && (VTdUnitInfo->ECapReg.Bits.ADMS == 1) && PcdGetBool (PcdVTdSupportAbortDmaMode)) {
+ if (VTdUnitInfo->CapReg.Bits.ESRTPS == 0) {
+ ClearGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_TE);
+ }
+
+ DEBUG ((DEBUG_INFO, "RootEntryTable 0x%x \n", RootEntryTable));
+ MmioWrite64 (VtdUnitBaseAddress + R_RTADDR_REG, (UINT64) RootEntryTable);
+ }
+
//
// Enable VTd
//
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- MmioWrite32 (VtdUnitBaseAddress + R_GCMD_REG, Reg32 | B_GMCD_REG_TE);
- DEBUG ((DEBUG_INFO, "EnableDmar: Waiting B_GSTS_REG_TE ...\n"));
- do {
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- } while ((Reg32 & B_GSTS_REG_TE) == 0);
+ SetGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_TE);
DEBUG ((DEBUG_INFO, "VTD () enabled!<<<<<<\n"));
@@ -500,8 +579,6 @@ DisableDmar (
)
{
UINT32 Reg32;
- UINT32 Status;
- UINT32 Command;
DEBUG ((DEBUG_INFO, ">>>>>>DisableDmar() for engine [%x] \n", VtdUnitBaseAddress));
@@ -516,28 +593,12 @@ DisableDmar (
//
// Set TE (Translation Enable: BIT31) of Global command register to zero
//
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- Status = (Reg32 & 0x96FFFFFF); // Reset the one-shot bits
- Command = (Status & ~B_GMCD_REG_TE);
- MmioWrite32 (VtdUnitBaseAddress + R_GCMD_REG, Command);
-
- //
- // Poll on TE Status bit of Global status register to become zero
- //
- do {
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- } while ((Reg32 & B_GSTS_REG_TE) == B_GSTS_REG_TE);
+ ClearGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_TE);
//
// Set SRTP (Set Root Table Pointer: BIT30) of Global command register in order to update the root table pointerDisable VTd
//
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- Status = (Reg32 & 0x96FFFFFF); // Reset the one-shot bits
- Command = (Status | B_GMCD_REG_SRTP);
- MmioWrite32 (VtdUnitBaseAddress + R_GCMD_REG, Command);
- do {
- Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
- } while((Reg32 & B_GSTS_REG_RTPS) == 0);
+ SetGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_SRTP);
Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
DEBUG((DEBUG_INFO, "DisableDmar: GSTS_REG - 0x%08x\n", Reg32));
@@ -568,12 +629,12 @@ EnableVTdTranslationProtectionBlockDma (
DEBUG ((DEBUG_INFO, "EnableVTdTranslationProtectionBlockDma - 0x%08x\n", VtdUnitBaseAddress));
- DEBUG ((DEBUG_INFO, "PcdVTdSupportAbortDmaMode : %d\n", FixedPcdGetBool (PcdVTdSupportAbortDmaMode)));
+ DEBUG ((DEBUG_INFO, "PcdVTdSupportAbortDmaMode : %d\n", PcdGetBool (PcdVTdSupportAbortDmaMode)));
ECapReg.Uint64 = MmioRead64 (VtdUnitBaseAddress + R_ECAP_REG);
DEBUG ((DEBUG_INFO, "ECapReg.ADMS : %d\n", ECapReg.Bits.ADMS));
- if ((ECapReg.Bits.ADMS == 1) && FixedPcdGetBool (PcdVTdSupportAbortDmaMode)) {
+ if ((ECapReg.Bits.ADMS == 1) && PcdGetBool (PcdVTdSupportAbortDmaMode)) {
//
// Use Abort DMA Mode
//
diff --git a/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/IntelVTdDxe.inf b/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/IntelVTdDxe.inf
index 387f90e37..b152831c0 100644
--- a/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/IntelVTdDxe.inf
+++ b/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/IntelVTdDxe.inf
@@ -75,6 +75,7 @@
[Pcd]
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPolicyPropertyMask ## CONSUMES
gIntelSiliconPkgTokenSpaceGuid.PcdErrorCodeVTdError ## CONSUMES
+ gIntelSiliconPkgTokenSpaceGuid.PcdVTdSupportAbortDmaMode ## CONSUMES
[Depex]
gEfiPciRootBridgeIoProtocolGuid
diff --git a/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/VtdReg.c b/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/VtdReg.c
index c7a56cf57..396aa4a70 100644
--- a/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/VtdReg.c
+++ b/Silicon/Intel/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/VtdReg.c
@@ -475,6 +475,92 @@ DisablePmr (
return ;
}
+/**
+ Clear Global Command Register Bits
+
+ @param[in] VtdUnitBaseAddress The base address of the VTd engine.
+ @param[in] BitMask Bit mask.
+**/
+VOID
+ClearGlobalCommandRegisterBits (
+ IN UINTN VtdUnitBaseAddress,
+ IN UINT32 BitMask
+ )
+{
+ UINT32 Reg32;
+ UINT32 Status;
+ UINT32 Command;
+
+ Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
+ Status = (Reg32 & 0x96FFFFFF); // Reset the one-shot bits
+ Command = (Status & (~BitMask));
+ MmioWrite32 (VtdUnitBaseAddress + R_GCMD_REG, Command);
+
+ DEBUG((DEBUG_INFO, "Clear GCMD_REG bits 0x%x.\n", BitMask));
+
+ //
+ // Poll on Status bit of Global status register to become zero
+ //
+ do {
+ Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
+ } while ((Reg32 & BitMask) == BitMask);
+}
+
+/**
+ Set Global Command Register Bits
+
+ @param[in] VtdUnitBaseAddress The base address of the VTd engine.
+ @param[in] BitMask Bit mask.
+**/
+VOID
+SetGlobalCommandRegisterBits (
+ IN UINTN VtdUnitBaseAddress,
+ IN UINT32 BitMask
+ )
+{
+ UINT32 Reg32;
+ UINT32 Status;
+ UINT32 Command;
+
+ Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
+ Status = (Reg32 & 0x96FFFFFF); // Reset the one-shot bits
+ Command = (Status | BitMask);
+ MmioWrite32 (VtdUnitBaseAddress + R_GCMD_REG, Command);
+
+ DEBUG((DEBUG_INFO, "Set GCMD_REG bits 0x%x.\n", BitMask));
+
+ //
+ // Poll on Status bit of Global status register to become not zero
+ //
+ do {
+ Reg32 = MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG);
+ } while ((Reg32 & BitMask) == 0);
+}
+
+/**
+ Update Root Table Address Register
+
+ @param[in] VtdIndex The index used to identify a VTd engine.
+ @param[in] EnableADM TRUE - Enable ADM in TTM bits
+**/
+VOID
+UpdateRootTableAddressRegister (
+ IN UINTN VtdIndex,
+ IN BOOLEAN EnableADM
+ )
+{
+ UINT64 Reg64;
+
+ if (mVtdUnitInformation[VtdIndex].ExtRootEntryTable != NULL) {
+ DEBUG((DEBUG_INFO, "ExtRootEntryTable 0x%x \n", mVtdUnitInformation[VtdIndex].ExtRootEntryTable));
+ Reg64 = (UINT64)(UINTN)mVtdUnitInformation[VtdIndex].ExtRootEntryTable | (EnableADM ? V_RTADDR_REG_TTM_ADM : BIT11);
+ } else {
+ DEBUG((DEBUG_INFO, "RootEntryTable 0x%x \n", mVtdUnitInformation[VtdIndex].RootEntryTable));
+ Reg64 = (UINT64)(UINTN)mVtdUnitInformation[VtdIndex].RootEntryTable | (EnableADM ? V_RTADDR_REG_TTM_ADM : 0);
+ }
+ MmioWrite64 (mVtdUnitInformation[VtdIndex].VtdUnitBaseAddress + R_RTADDR_REG, Reg64);
+}
+
/**
Enable DMAR translation.
@@ -488,25 +574,43 @@ EnableDmar (
{
UINTN Index;
UINT32 Reg32;
+ UINTN VtdUnitBaseAddress;
+ BOOLEAN TEWasEnabled;
for (Index = 0; Index < mVtdUnitNumber; Index++) {
- DEBUG((DEBUG_INFO, ">>>>>>EnableDmar() for engine [%d] \n", Index));
+ VtdUnitBaseAddress = mVtdUnitInformation[Index].VtdUnitBaseAddress;
+ DEBUG((DEBUG_INFO, ">>>>>>EnableDmar() for engine [%d] BAR [0x%x]\n", Index, VtdUnitBaseAddress));
+
+ //
+ // Check TE was enabled or not.
+ //
+ TEWasEnabled = ((MmioRead32 (VtdUnitBaseAddress + R_GSTS_REG) & B_GSTS_REG_TE) == B_GSTS_REG_TE);
+
+ if (TEWasEnabled && (mVtdUnitInformation[Index].ECapReg.Bits.ADMS == 1) && PcdGetBool (PcdVTdSupportAbortDmaMode)) {
+ //
+ // For implementations reporting Enhanced SRTP Support (ESRTPS) field as
+ // Clear in the Capability register, software must not modify this field while
+ // DMA remapping is active (TES=1 in Global Status register).
+ //
+ if (mVtdUnitInformation[Index].CapReg.Bits.ESRTPS == 0) {
+ ClearGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_TE);
+ }
+
+ //
+ // Enable ADM
+ //
+ UpdateRootTableAddressRegister (Index, TRUE);
+
+ DEBUG((DEBUG_INFO, "Enable Abort DMA Mode...\n"));
+ SetGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_TE);
- if (mVtdUnitInformation[Index].ExtRootEntryTable != NULL) {
- DEBUG((DEBUG_INFO, "ExtRootEntryTable 0x%x \n", mVtdUnitInformation[Index].ExtRootEntryTable));
- MmioWrite64 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_RTADDR_REG, (UINT64)(UINTN)mVtdUnitInformation[Index].ExtRootEntryTable | BIT11);
} else {
- DEBUG((DEBUG_INFO, "RootEntryTable 0x%x \n", mVtdUnitInformation[Index].RootEntryTable));
- MmioWrite64 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_RTADDR_REG, (UINT64)(UINTN)mVtdUnitInformation[Index].RootEntryTable);
- }
+ UpdateRootTableAddressRegister (Index, FALSE);
- Reg32 = MmioRead32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GSTS_REG);
- MmioWrite32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GCMD_REG, Reg32 | B_GMCD_REG_SRTP);
+ }
DEBUG((DEBUG_INFO, "EnableDmar: waiting for RTPS bit to be set... \n"));
- do {
- Reg32 = MmioRead32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GSTS_REG);
- } while((Reg32 & B_GSTS_REG_RTPS) == 0);
+ SetGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_SRTP);
//
// Init DMAr Fault Event and Data registers
@@ -528,15 +632,19 @@ EnableDmar (
//
InvalidateIOTLB (Index);
+ if (TEWasEnabled && (mVtdUnitInformation[Index].ECapReg.Bits.ADMS == 1) && PcdGetBool (PcdVTdSupportAbortDmaMode)) {
+ if (mVtdUnitInformation[Index].CapReg.Bits.ESRTPS == 0) {
+ ClearGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_TE);
+ }
+
+ UpdateRootTableAddressRegister (Index, FALSE);
+ }
+
//
// Enable VTd
//
- Reg32 = MmioRead32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GSTS_REG);
- MmioWrite32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GCMD_REG, Reg32 | B_GMCD_REG_TE);
- DEBUG((DEBUG_INFO, "EnableDmar: Waiting B_GSTS_REG_TE ...\n"));
- do {
- Reg32 = MmioRead32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GSTS_REG);
- } while ((Reg32 & B_GSTS_REG_TE) == 0);
+ DEBUG ((DEBUG_INFO, "EnableDmar: Waiting B_GSTS_REG_TE ...\n"));
+ SetGlobalCommandRegisterBits (VtdUnitBaseAddress, B_GMCD_REG_TE);
DEBUG ((DEBUG_INFO,"VTD (%d) enabled!<<<<<<\n",Index));
}
@@ -565,8 +673,6 @@ DisableDmar (
UINTN Index;
UINTN SubIndex;
UINT32 Reg32;
- UINT32 Status;
- UINT32 Command;
for (Index = 0; Index < mVtdUnitNumber; Index++) {
DEBUG((DEBUG_INFO, ">>>>>>DisableDmar() for engine [%d] \n", Index));
@@ -582,32 +688,15 @@ DisableDmar (
//
// Set TE (Translation Enable: BIT31) of Global command register to zero
//
- Reg32 = MmioRead32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GSTS_REG);
- Status = (Reg32 & 0x96FFFFFF); // Reset the one-shot bits
- Command = (Status & ~B_GMCD_REG_TE);
- MmioWrite32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GCMD_REG, Command);
-
- //
- // Poll on TE Status bit of Global status register to become zero
- //
- do {
- Reg32 = MmioRead32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GSTS_REG);
- } while ((Reg32 & B_GSTS_REG_TE) == B_GSTS_REG_TE);
+ ClearGlobalCommandRegisterBits (mVtdUnitInformation[Index].VtdUnitBaseAddress, B_GMCD_REG_TE);
//
// Set SRTP (Set Root Table Pointer: BIT30) of Global command register in order to update the root table pointerDisable VTd
//
- Reg32 = MmioRead32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GSTS_REG);
- Status = (Reg32 & 0x96FFFFFF); // Reset the one-shot bits
- Command = (Status | B_GMCD_REG_SRTP);
- MmioWrite32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GCMD_REG, Command);
-
- do {
- Reg32 = MmioRead32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GSTS_REG);
- } while((Reg32 & B_GSTS_REG_RTPS) == 0);
+ SetGlobalCommandRegisterBits (mVtdUnitInformation[Index].VtdUnitBaseAddress, B_GSTS_REG_RTPS);
Reg32 = MmioRead32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GSTS_REG);
- DEBUG((DEBUG_INFO, "DisableDmar: GSTS_REG - 0x%08x\n", Reg32));
+ DEBUG ((DEBUG_INFO, "DisableDmar: GSTS_REG - 0x%08x\n", Reg32));
DEBUG ((DEBUG_INFO,"VTD (%d) Disabled!<<<<<<\n",Index));
diff --git a/Silicon/Intel/IntelSiliconPkg/IntelSiliconPkg.dec b/Silicon/Intel/IntelSiliconPkg/IntelSiliconPkg.dec
index c36d130a0..9166e599a 100644
--- a/Silicon/Intel/IntelSiliconPkg/IntelSiliconPkg.dec
+++ b/Silicon/Intel/IntelSiliconPkg/IntelSiliconPkg.dec
@@ -135,12 +135,6 @@
gIntelSiliconPkgTokenSpaceGuid.PcdFlashMicrocodeFvSize|0x000A0000|UINT32|0x0000000A
gIntelSiliconPkgTokenSpaceGuid.PcdFlashMicrocodeFvOffset|0x00660000|UINT32|0x0000000B
- ## Indicates if VTd Abort DMA Mode is supported.<BR><BR>
- # TRUE - Support VTd abort DMA mode.
- # FALSE - Not support VTd abort DMA mode.
- # @Prompt VTd abort DMA mode support.
- gIntelSiliconPkgTokenSpaceGuid.PcdVTdSupportAbortDmaMode|FALSE|BOOLEAN|0x0000000C
-
[PcdsFixedAtBuild, PcdsPatchableInModule]
## Error code for VTd error.<BR><BR>
# EDKII_ERROR_CODE_VTD_ERROR = (EFI_IO_BUS_UNSPECIFIED | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x02008000<BR>
@@ -178,3 +172,9 @@
# @Prompt The VTd PEI DMA buffer size for S3.
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSizeS3|0x00200000|UINT32|0x00000004
+ ## Indicates if VTd Abort DMA Mode is supported.<BR><BR>
+ # TRUE - Support VTd abort DMA mode.
+ # FALSE - Not support VTd abort DMA mode.
+ # @Prompt VTd abort DMA mode support.
+ gIntelSiliconPkgTokenSpaceGuid.PcdVTdSupportAbortDmaMode|FALSE|BOOLEAN|0x0000000C
+
--
2.26.2.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#93138): https://edk2.groups.io/g/devel/message/93138
Mute This Topic: https://groups.io/mt/93474620/1787277
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [importer@patchew.org]
-=-=-=-=-=-=-=-=-=-=-=-© 2016 - 2024 Red Hat, Inc.