The Agilex5 SoCDK supports an optional debug daughter card that requires
a dedicated device tree variant due to differences in peripheral
connectivity compared to the standard SoCDK configuration.

When the debug daughter card is fitted:
  - gpio0 is unrouted and remains disabled
  - gmac2 is replaced by gmac0 for Ethernet connectivity
  - spi0 is connected to a Microchip 25AA128 16 KByte SPI EEPROM

---
changelog:
v1->v2:
- Use socfpga_agilex5.dtsi as the base include instead of
  socfpga_agilex5_socdk.dts to follow the convention that .dts files
  are final compilation units and should not be included by other files
- Replace spidev node (with fake rohm,dh2228fv compatible) with a
  proper atmel,at25 EEPROM binding describing the actual hardware
- Remove dmas/dma-names from spi0: CONFIG_DW_AXI_DMAC is not enabled
  in the platform defconfig and retaining them stalls the SPI driver
  in probe deferral
- Remove incorrect HPS LED GPIO override; the LED mapping is unchanged
  from the base board
---

Adrian Ng Ho Yin (2):
  dt-bindings: altera: add compatible for agilex5 socdk debug daughter
    card
  arm64: dts: agilex5: add support for debug daughter card

 .../devicetree/bindings/arm/altera.yaml       |   1 +
 arch/arm64/boot/dts/intel/Makefile            |   1 +
 .../dts/intel/socfpga_agilex5_socdk_debug.dts | 123 ++++++++++++++++++
 3 files changed, 125 insertions(+)
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_debug.dts

-- 
2.49.GIT