From nobody Fri Sep 25 12:04:11 2026 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 87667348C4B for ; Sun, 13 Sep 2026 12:33:00 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.168.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1789302782; cv=none; b=ojS9HU4DCztc7I1WD2A7YbV2haK05Nom6DElKPaW0RosoOx70j2EbN60bV75ZgbeI9RtkG4ekE3v7YerMxZr44s6ShE+cGIZykj0J57hVP9nvkJJp1jdKaZy7XhRynjFtksbLWDbQgbVWfVVHQLyPbsM3PctSaY4cS8PBSUlLW8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1789302782; c=relaxed/simple; bh=wwlTQcPzs2frrHknWoo6bb9wxA0MjIK1jG08afo8UU4=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=AZmrniR64/X8XuJJxSBJ9Vhs8RcaYA+uDnst06XAe2HG7slrAz8wfBZK8cynaqOxjISWYnQOi8s7ZYW3YuVvkfkgXK/IUs0blJ7Y/6/vEeuTktXU5fTBXKgE04PiJnoNAQdRqziKNFGumY2UQrFkhuZY65SvKVrwrH1KGm7wBL4= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com; spf=pass smtp.mailfrom=oss.qualcomm.com; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b=ptoIEYc8; dkim=pass (2048-bit key) header.d=oss.qualcomm.com header.i=@oss.qualcomm.com header.b=CpzwtOtJ; arc=none smtp.client-ip=205.220.168.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b="ptoIEYc8"; dkim=pass (2048-bit key) header.d=oss.qualcomm.com header.i=@oss.qualcomm.com header.b="CpzwtOtJ" Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.11/8.18.1.11) with ESMTP id 68DAURao1005564 for ; Sun, 13 Sep 2026 12:33:00 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=qualcomm.com; h= cc:content-transfer-encoding:date:from:message-id:mime-version :subject:to; s=qcppdkim1; bh=1FVSrZSbeNyVRI9EfrOQ8L+0C/xAEcmVpw5 vCQ4NOu0=; b=ptoIEYc8lKy8y2QRKhUWP35dclY9m9UbCFlai3AzPjicmpj+7r0 y0ktnyGz6g9aENFJemMsEUz7VhucT7WyPkfeC7K2pKXazaOUf/k+DWKNMMw7YySp 2WvllfqJmSqb8d+qLyAab5J17sKaQZGXu2cX2fZPg8NCm+3EXV08/qYyQUHQbno4 snHs+PhFlOV5isOl0/2hfqwdmEOtzhDyODvDGItfrrjF9SQGvxyEzy3uLOdbiAnO QSYTwCIrj5shipz3kOORPu8C4r9LUQGmAiTAYuAIHBZ41GlgyaNWTIslYZLlRQ8e A/+qrYifzy32ipNJt3N+K8EtUF10CGx1xKA== Received: from mail-qk1-f199.google.com (mail-qk1-f199.google.com [209.85.222.199]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 4gmygd38n7-1 (version=TLSv1.3 cipher=TLS_AES_128_GCM_SHA256 bits=128 verify=NOT) for ; Sun, 13 Sep 2026 12:32:59 +0000 (GMT) Received: by mail-qk1-f199.google.com with SMTP id af79cd13be357-93a05d645acso256591685a.2 for ; Sun, 13 Sep 2026 05:32:59 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=oss.qualcomm.com; s=google; t=1789302779; x=1789907579; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to:content-type; bh=1FVSrZSbeNyVRI9EfrOQ8L+0C/xAEcmVpw5vCQ4NOu0=; b=CpzwtOtJn/b0fwrrCd4HWEKwmWtvouc5RC8nWScKDtdMhufZqFHT9ZZTiJS3d0sI4b 6XYanVovHR3RDgzpEDvz/srezFbJS+ANAky7rmpALa/otDPzpJT6+4Mffe4Txy5uWppP sfiMHh0b33yNjwvqFgXsEiuxU1ZfDozwp6bSuJfAv3LRpBGVL5miFMzcV2OAxV3Z45Xb r256mbvhLF8EuLi+IMLS+FgvH+7garujYlSpA6pO3UKN6GUTAkmvUvquMP7ya9WjhUw/ 7jF5IAZPP1bB1rT+vtxtGIBzLnCDZZeP5Z5/6uyANUi7JBi/moGEyjEfU3ZRZcUHgtbp EyLg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1789302779; x=1789907579; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-gg:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to:content-type; bh=1FVSrZSbeNyVRI9EfrOQ8L+0C/xAEcmVpw5vCQ4NOu0=; b=lfXrc3zGi3L0Q8Tef7kt/EVK0rynxvctrSD8GGRh449VD/ylk0mYx/MA5jzNrjGqaQ bIjhgIZrQ2mDsUPfB9fgj6LiQMRfgTKdDdSy0NhbNAvdWB4tETQ5PFtnQ9rJKuK1rAFh PLsomQtpaHmFz7+fTfB4+6/2NeGwOqCudqnE1HOaBtRG1TLfC43dTaiqQQjbBp2l6K3q Je0n/SrtMqiDnFqDlX0ofDZ/7lTmSRxO3KTqsGBFlH2/WCAPARYd2fcDL2LMUNzGs0tf 92INm/6xbTnJz72pySOUV+DEEYMkaKRF4AG1QTDKQ/VYiBmRuUstw1k74efVHiyn6feO zP7g== X-Forwarded-Encrypted: i=1; AKwUvBy7Ie9TdjpJlHtvUuPeY7Igi58f67NxcOPbr8eHn1aGj3W34988m4dOyzKQrhu4zW+qOcaSf6FUYQ6lXTg=@vger.kernel.org X-Gm-Message-State: AFuF++nVAC4Nwx3g85ou43p4HmlQmSH12iij0ZkI13ksHFxu+iQp7jLr 8v8gaA8y/EJiKl80U+0Ixm0joTtl76+rC25FttLn3btuPjSa2mFbsNAjNwVia5lpZZ3p92x33sS udR+VjLcGBT4XxK5pFmOBz5SY8GH6f514KJj0WhDtBhusKCcyOt4hCCwKYANz2sH3kiQ= X-Gm-Gg: AYBFou0UAn2JvNE4c0CA2LogFcxcB6QX7DnON1k2bma8O2Bpspti1ysDYVvmKVTUnB3 s/VqzNl8zjs/HcoCVQxRf/F4E7AMjFqog9xX+k8aggvDuDoyx17tM2GtorwAfR/1wSiq1x3Lu+1 5Pqo15ihyc9HHAsnCWImjDrYyToG1a9Psc/oIzsSYC9VHeP64NK8Hz7LDUEyWAifA8Plqm+jKDt vvr6j9cG5qiqWjxoNluzSySQXjbLUMCk/bpVF/WL+Mj66n/lZTHdfuwBppus9voNoLB2QpwgmmC yXL2dx1CR3mp2GEEvz5ExsplR+T3sjt16Bq8ztcWJJd8zums2mOeJOkOkKWyDu6eCxyu8DrMQdP +BWkGO+C8//rIyoo= X-Received: by 2002:a05:620a:2951:b0:939:d6f3:1268 with SMTP id af79cd13be357-939ea135b79mr1915534085a.16.1789302778710; Sun, 13 Sep 2026 05:32:58 -0700 (PDT) X-Received: by 2002:a05:620a:2951:b0:939:d6f3:1268 with SMTP id af79cd13be357-939ea135b79mr1915530085a.16.1789302778211; Sun, 13 Sep 2026 05:32:58 -0700 (PDT) Received: from quoll ([178.197.219.214]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-49e6576122bsm296862815e9.2.2026.09.13.05.32.55 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 13 Sep 2026 05:32:57 -0700 (PDT) From: Krzysztof Kozlowski To: Daniel Scally , Jacopo Mondi , Mauro Carvalho Chehab , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Eugen Hristev , Nicolas Ferre , Alexandre Belloni , Claudiu Beznea , Raspberry Pi Kernel Maintenance , Florian Fainelli , Broadcom internal kernel review list , Ray Jui , Scott Branden , Maxime Ripard , Rui Miguel Silva , Hans de Goede , Walter Werner Schneider , Devarsh Thakkar , "Bryan O'Donoghue" , Vladimir Zapolskiy , Loic Poulain , Sylwester Nawrocki , Hugues Fruchet , Alain Volmat , Maxime Coquelin , Alexandre Torgue , Yemike Abhilash Chandra , Benoit Parrot , linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rpi-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com Cc: Krzysztof Kozlowski Subject: [PATCH] media: dt-bindings: Use consistent indentation in the example Date: Sun, 13 Sep 2026 14:32:53 +0200 Message-ID: <20260913123252.100085-2-krzysztof.kozlowski@oss.qualcomm.com> X-Mailer: git-send-email 2.53.0 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Developer-Signature: v=1; a=openpgp-sha256; l=22575; i=krzysztof.kozlowski@oss.qualcomm.com; h=from:subject; bh=wwlTQcPzs2frrHknWoo6bb9wxA0MjIK1jG08afo8UU4=; b=owEBbQKS/ZANAwAKAcE3ZuaGi4PXAcsmYgBqppf00l4dZQfHIMWsXISWOhadvBqqfHIX3/94s yvEr8XlTG6JAjMEAAEKAB0WIQTd0mIoPREbIztuuKjBN2bmhouD1wUCaqaX9AAKCRDBN2bmhouD 13rWD/0U4ljiJDteSBU0H8yyud2cskG7YAzrc5o7ws/lDF3KLeMk5iRdtltV/EQJLWv3bWjgPAE z7emnFYoelUvGVc5qnasCReJ3oCrTlKIHg/pZvZodsq/FuU1P5ebg72dIFRf1Wy+R9PcznxQYBn thraY5MqwVTBscgCVXPpaC45I6xcVwqgMZQuMh1bYfGbLwtmvKVlqWZbk7Y2UdxZ9q9tNJlBo7D u6DqcPFDskmRxyUqT/qHF71mMYG1tblvnEUTFK4xUtmjHMT3qgnUyOiTdEVd0kZHwcrsELA9sqX dq5K1GMf339JBNURkiq/JLgHKMnoOA8cMxICY3yi7yi3yWC5bkaeedWMyOmy4Dn5w+p9H6synlX bWqhfeCwjdmuqC1qHfTTbL1fHQ0D570coYdEIct5fCWlUVG4aoQsG9IVPtRCFJ525LB29TMA/Gd 2sEie5SD3az3FUi5W0Aso/DBCOk5EvDJm1DszrcdNLzj0JdJAZz/iOmSdG04oJAtBMs+0wASlgB HW/uqZR5MDz6HYas6Q8FXmkL25Bg030ncnTLTGWQXD7LeuA6blE6k0yXnmM4Ciug3JL0jFQupKA FF+Tn+YbnlMBmdsx8ZUMQ8PPT3bqwanWYvXpfEBbNQ8s3ama0bJgVqe5w0K2xNS3eZXefWoitwU kbLDZaEX4R6AKNQ== X-Developer-Key: i=krzysztof.kozlowski@oss.qualcomm.com; a=openpgp; fpr=9BD07E0E0C51F8D59677B7541B93437D3B41629B Content-Transfer-Encoding: quoted-printable X-Authority-Analysis: v=2.4 cv=RY0FmFtv c=1 sm=1 tr=0 ts=6aa697fb cx=c_pps a=HLyN3IcIa5EE8TELMZ618Q==:117 a=+bKQE0WJfmhK2875HamI0Q==:17 a=VdqzKS8jKosA:10 a=s4-Qcg_JpJYA:10 a=VkNPw1HP01LnGYTKEx00:22 a=u7WPNUs3qKkmUXheDGA7:22 a=_K5XuSEh1TEqbUxoQ0s3:22 a=EUspDBNiAAAA:8 a=C4CHKQPVujXnZafBmVMA:9 a=bTQJ7kPSJx9SKPbeHEYW:22 X-Proofpoint-Spam-Details-Enc: AW1haW4tMjYwOTEzMDE3OCBTYWx0ZWRfX84FzqhQlLgo6 fWip4+DBgIMpQ7AsqgEPXfchkAxsPlqUwN5fyoUzeI4M7VniSOkO2x6JiO1MPebg4tBzKZAEtYq RAL3BGIh9CSRRTBP3adIZrDv2D5tLoS2vQh2ek4HbXSvrmXQl1M5Y+TfqVgmmQluyYlobUpoQDP 8RF6pz2r6SSh8pw25tTc4WnJKhfLZO8AuyOGbWLOnSDoaxdmWEgU16qDwrLp2s2oPd7wVjZM7Lz jldKIBSWuwVBsukidVQifQtSPpt9iS6+poP2Ds5Pn6kU8MyuxAj38Z4/vMoFViGM6VRTyS2xaXu xPMNuospGy0ZYwAJPTCYir/BQXdenrFAHDOB0WqSbwLY4LfhSaXyYccbIPScte9i5STBuSv0DtZ csxzvzzD3Y51Upfa/IYZ6/psELVR/aKW8KOy2/DJ1nYjZvC/cZZX5A+Yqpvm/Xt9IjAmCjka7mn GdZ87q3+CUpY0L9Ezlw== X-Proofpoint-ORIG-GUID: CUbYneHRDhvxhtuYCE6HLldWuUKeF7Gg X-Proofpoint-Spam-Info: AW1haW4tMjYwOTEzMDE3OCBTYWx0ZWRfX/nHgbo84srJC U4TrJhJAmZHsfaCWeHui4tptew1gf0jEzRs22ktpkslQFw88gD7oRp/0CC7TjJv2TsRicHN9EWE Vk8afXCAlhDBzd+LixPPBWOeYVTYZ2g= X-Proofpoint-GUID: CUbYneHRDhvxhtuYCE6HLldWuUKeF7Gg X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1176,Hydra:6.1.134,FMLib:17.12.100.49 definitions=2026-09-13_04,2026-09-11_02,2025-10-01_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 clxscore=1015 priorityscore=1501 spamscore=0 suspectscore=0 lowpriorityscore=0 impostorscore=0 phishscore=0 malwarescore=0 bulkscore=0 adultscore=0 classifier=typeunknown authscore=0 authtc= authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.22.0-2609040000 definitions=main-2609130178 Content-Type: text/plain; charset="utf-8" Correct indentation in the examples to consistent 2- or 4-spaces indentation to fix dt-check-style warnings ("example 0 [indent-consistent] indent mismatch ..."). Preferred is 4-spaces, but re-indenting entire example just for that is too much churn. Signed-off-by: Krzysztof Kozlowski --- .../bindings/media/arm,mali-c55.yaml | 2 +- .../devicetree/bindings/media/atmel,isc.yaml | 14 ++--- .../bindings/media/brcm,bcm2835-unicam.yaml | 10 ++-- .../bindings/media/cdns,csi2rx.yaml | 58 +++++++++---------- .../bindings/media/i2c/ovti,ov2680.yaml | 26 ++++----- .../bindings/media/i2c/ovti,ov2732.yaml | 6 +- .../bindings/media/img,e5010-jpeg-enc.yaml | 22 +++---- .../bindings/media/microchip,csi2dc.yaml | 52 ++++++++--------- .../bindings/media/microchip,xisc.yaml | 14 ++--- .../bindings/media/qcom,x1e80100-camss.yaml | 26 ++++----- .../bindings/media/raspberrypi,pispbe.yaml | 10 ++-- .../bindings/media/samsung,fimc.yaml | 14 ++--- .../bindings/media/st,stm32-dcmi.yaml | 16 ++--- .../bindings/media/st,stm32-dcmipp.yaml | 14 ++--- .../devicetree/bindings/media/ti,cal.yaml | 48 +++++++-------- 15 files changed, 166 insertions(+), 166 deletions(-) diff --git a/Documentation/devicetree/bindings/media/arm,mali-c55.yaml b/Do= cumentation/devicetree/bindings/media/arm,mali-c55.yaml index fc4fcd19922a..39af7ffc70b4 100644 --- a/Documentation/devicetree/bindings/media/arm,mali-c55.yaml +++ b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml @@ -79,7 +79,7 @@ examples: =20 port { isp_in: endpoint { - remote-endpoint =3D <&csi2_rx_out>; + remote-endpoint =3D <&csi2_rx_out>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/atmel,isc.yaml b/Docum= entation/devicetree/bindings/media/atmel,isc.yaml index dc8aba698d78..5c84f372e81a 100644 --- a/Documentation/devicetree/bindings/media/atmel,isc.yaml +++ b/Documentation/devicetree/bindings/media/atmel,isc.yaml @@ -102,12 +102,12 @@ examples: clock-output-names =3D "isc-mck"; =20 port { - isc_0: endpoint { - remote-endpoint =3D <&ov7740_0>; - hsync-active =3D <1>; - vsync-active =3D <0>; - pclk-sample =3D <1>; - bus-width =3D <8>; - }; + isc_0: endpoint { + remote-endpoint =3D <&ov7740_0>; + hsync-active =3D <1>; + vsync-active =3D <0>; + pclk-sample =3D <1>; + bus-width =3D <8>; + }; }; }; diff --git a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.ya= ml b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml index 5fb5d60f069a..bfec4daccd0a 100644 --- a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml +++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml @@ -117,11 +117,11 @@ examples: power-domains =3D <&power RPI_POWER_DOMAIN_UNICAM1>; brcm,num-data-lanes =3D <2>; port { - csi1_ep: endpoint { - remote-endpoint =3D <&imx219_0>; - bus-type =3D ; - data-lanes =3D <1 2>; - }; + csi1_ep: endpoint { + remote-endpoint =3D <&imx219_0>; + bus-type =3D ; + data-lanes =3D <1 2>; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Doc= umentation/devicetree/bindings/media/cdns,csi2rx.yaml index 6ed9a5621064..cbc6249e8803 100644 --- a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml +++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml @@ -160,50 +160,50 @@ examples: phy-names =3D "dphy"; =20 ports { - #address-cells =3D <1>; - #size-cells =3D <0>; + #address-cells =3D <1>; + #size-cells =3D <0>; =20 - port@0 { - reg =3D <0>; + port@0 { + reg =3D <0>; =20 - csi2rx_in_sensor: endpoint { - remote-endpoint =3D <&sensor_out_csi2rx>; - clock-lanes =3D <0>; - data-lanes =3D <1 2>; - }; + csi2rx_in_sensor: endpoint { + remote-endpoint =3D <&sensor_out_csi2rx>; + clock-lanes =3D <0>; + data-lanes =3D <1 2>; }; + }; =20 - port@1 { - reg =3D <1>; + port@1 { + reg =3D <1>; =20 - csi2rx_out_grabber0: endpoint { - remote-endpoint =3D <&grabber0_in_csi2rx>; - }; + csi2rx_out_grabber0: endpoint { + remote-endpoint =3D <&grabber0_in_csi2rx>; }; + }; =20 - port@2 { - reg =3D <2>; + port@2 { + reg =3D <2>; =20 - csi2rx_out_grabber1: endpoint { - remote-endpoint =3D <&grabber1_in_csi2rx>; - }; + csi2rx_out_grabber1: endpoint { + remote-endpoint =3D <&grabber1_in_csi2rx>; }; + }; =20 - port@3 { - reg =3D <3>; + port@3 { + reg =3D <3>; =20 - csi2rx_out_grabber2: endpoint { - remote-endpoint =3D <&grabber2_in_csi2rx>; - }; + csi2rx_out_grabber2: endpoint { + remote-endpoint =3D <&grabber2_in_csi2rx>; }; + }; =20 - port@4 { - reg =3D <4>; + port@4 { + reg =3D <4>; =20 - csi2rx_out_grabber3: endpoint { - remote-endpoint =3D <&grabber3_in_csi2rx>; - }; + csi2rx_out_grabber3: endpoint { + remote-endpoint =3D <&grabber3_in_csi2rx>; }; + }; }; }; =20 diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b= /Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml index 634d3b821b8c..83f84a7828bf 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml @@ -90,22 +90,22 @@ examples: #size-cells =3D <0>; =20 ov2680: camera-sensor@36 { - compatible =3D "ovti,ov2680"; - reg =3D <0x36>; - clocks =3D <&osc>; - clock-names =3D "xvclk"; - reset-gpios =3D <&gpio1 3 GPIO_ACTIVE_LOW>; + compatible =3D "ovti,ov2680"; + reg =3D <0x36>; + clocks =3D <&osc>; + clock-names =3D "xvclk"; + reset-gpios =3D <&gpio1 3 GPIO_ACTIVE_LOW>; =20 - DOVDD-supply =3D <&sw2_reg>; - DVDD-supply =3D <&sw2_reg>; - AVDD-supply =3D <®_peri_3p15v>; + DOVDD-supply =3D <&sw2_reg>; + DVDD-supply =3D <&sw2_reg>; + AVDD-supply =3D <®_peri_3p15v>; =20 - port { - ov2680_to_mipi: endpoint { - remote-endpoint =3D <&mipi_from_sensor>; - link-frequencies =3D /bits/ 64 <330000000>; - }; + port { + ov2680_to_mipi: endpoint { + remote-endpoint =3D <&mipi_from_sensor>; + link-frequencies =3D /bits/ 64 <330000000>; }; + }; }; }; =20 diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2732.yaml b= /Documentation/devicetree/bindings/media/i2c/ovti,ov2732.yaml index 814fc568c550..b6b5145802e7 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2732.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2732.yaml @@ -94,9 +94,9 @@ examples: =20 port { camera_out: endpoint { - data-lanes =3D <1 2>; - link-frequencies =3D /bits/ 64 <360000000>; - remote-endpoint =3D <&mipi_in_camera>; + data-lanes =3D <1 2>; + link-frequencies =3D /bits/ 64 <360000000>; + remote-endpoint =3D <&mipi_in_camera>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yam= l b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml index 085020cb9e61..b6f80098beb7 100644 --- a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml +++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml @@ -61,15 +61,15 @@ examples: #include =20 soc { - #address-cells =3D <2>; - #size-cells =3D <2>; - jpeg-encoder@fd20000 { - compatible =3D "img,e5010-jpeg-enc"; - reg =3D <0x00 0xfd20000 0x00 0x100>, - <0x00 0xfd20200 0x00 0x200>; - reg-names =3D "core", "mmu"; - clocks =3D <&k3_clks 201 0>; - power-domains =3D <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>; - interrupts =3D ; - }; + #address-cells =3D <2>; + #size-cells =3D <2>; + jpeg-encoder@fd20000 { + compatible =3D "img,e5010-jpeg-enc"; + reg =3D <0x00 0xfd20000 0x00 0x100>, + <0x00 0xfd20200 0x00 0x200>; + reg-names =3D "core", "mmu"; + clocks =3D <&k3_clks 201 0>; + power-domains =3D <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>; + interrupts =3D ; + }; }; diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml = b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml index b3a345fc6464..d06987680ed8 100644 --- a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml +++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml @@ -149,22 +149,22 @@ examples: clock-names =3D "pclk", "scck"; =20 ports { - #address-cells =3D <1>; - #size-cells =3D <0>; - port@0 { - reg =3D <0>; /* must be 0, first child port */ - csi2dc_in: endpoint { /* input from IDI interface */ - bus-type =3D <4>; /* MIPI CSI2 D-PHY */ - remote-endpoint =3D <&csi2host_out>; - }; - }; + #address-cells =3D <1>; + #size-cells =3D <0>; + port@0 { + reg =3D <0>; /* must be 0, first child port */ + csi2dc_in: endpoint { /* input from IDI interface */ + bus-type =3D <4>; /* MIPI CSI2 D-PHY */ + remote-endpoint =3D <&csi2host_out>; + }; + }; =20 - port@1 { - reg =3D <1>; /* must be 1, second child port */ - csi2dc_out: endpoint { - remote-endpoint =3D <&xisc_in>; /* output t= o sensor controller */ - }; - }; + port@1 { + reg =3D <1>; /* must be 1, second child port */ + csi2dc_out: endpoint { + remote-endpoint =3D <&xisc_in>; /* output to sensor co= ntroller */ + }; + }; }; }; =20 @@ -181,18 +181,18 @@ examples: dma-names =3D "rx"; =20 ports { - #address-cells =3D <1>; - #size-cells =3D <0>; - port@0 { - reg =3D <0>; /* must be 0, first child port */ - csi2dc_input: endpoint { /* input from IDI interfac= e */ - remote-endpoint =3D <&csi2host_out>; - }; - }; + #address-cells =3D <1>; + #size-cells =3D <0>; + port@0 { + reg =3D <0>; /* must be 0, first child port */ + csi2dc_input: endpoint { /* input from IDI interface */ + remote-endpoint =3D <&csi2host_out>; + }; + }; =20 - port@1 { - reg =3D <1>; - }; + port@1 { + reg =3D <1>; + }; }; }; =20 diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/= Documentation/devicetree/bindings/media/microchip,xisc.yaml index 25f5f79d40ce..6a9e56c486c2 100644 --- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml @@ -118,12 +118,12 @@ examples: clock-output-names =3D "isc-mck"; =20 port { - xisc_in: endpoint { - bus-type =3D ; - remote-endpoint =3D <&csi2dc_out>; - hsync-active =3D <1>; - vsync-active =3D <1>; - bus-width =3D <12>; - }; + xisc_in: endpoint { + bus-type =3D ; + remote-endpoint =3D <&csi2dc_out>; + hsync-active =3D <1>; + vsync-active =3D <1>; + bus-width =3D <12>; + }; }; }; diff --git a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.ya= ml b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml index 2d1662ef522b..bdf03a944fd7 100644 --- a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml @@ -289,19 +289,19 @@ examples: "vfe_lite_cphy_rx", "vfe_lite_csid"; =20 - interrupts =3D , - , - , - , - , - , - , - , - , - , - , - , - ; + interrupts =3D , + , + , + , + , + , + , + , + , + , + , + , + ; =20 interrupt-names =3D "csid0", "csid1", diff --git a/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yam= l b/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml index 5c0f2f7b1d95..36fde927382a 100644 --- a/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml +++ b/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml @@ -54,10 +54,10 @@ examples: #size-cells =3D <2>; =20 isp@880000 { - compatible =3D "brcm,bcm2712-pispbe", "raspberrypi,pispbe"; - reg =3D <0x10 0x00880000 0x0 0x4000>; - interrupts =3D ; - clocks =3D <&firmware_clocks 7>; - iommus =3D <&iommu2>; + compatible =3D "brcm,bcm2712-pispbe", "raspberrypi,pispbe"; + reg =3D <0x10 0x00880000 0x0 0x4000>; + interrupts =3D ; + clocks =3D <&firmware_clocks 7>; + iommus =3D <&iommu2>; }; }; diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Do= cumentation/devicetree/bindings/media/samsung,fimc.yaml index 1bfba84f8854..1329d4ee0705 100644 --- a/Documentation/devicetree/bindings/media/samsung,fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml @@ -188,13 +188,13 @@ examples: /* ... CSIS 1 */ =20 fimc-lite@b90000 { - compatible =3D "samsung,exynos4212-fimc-lite"; - reg =3D <0xb90000 0x1000>; - interrupts =3D ; - power-domains =3D <&pd_isp>; - clocks =3D <&isp_clock CLK_ISP_FIMC_LITE0>; - clock-names =3D "flite"; - iommus =3D <&sysmmu_fimc_lite0>; + compatible =3D "samsung,exynos4212-fimc-lite"; + reg =3D <0xb90000 0x1000>; + interrupts =3D ; + power-domains =3D <&pd_isp>; + clocks =3D <&isp_clock CLK_ISP_FIMC_LITE0>; + clock-names =3D "flite"; + iommus =3D <&sysmmu_fimc_lite0>; }; =20 /* ... FIMC-LITE 1 */ diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/D= ocumentation/devicetree/bindings/media/st,stm32-dcmi.yaml index 7c2ddd27780f..cb0116176c3f 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml @@ -120,14 +120,14 @@ examples: dma-names =3D "tx"; =20 port { - dcmi_0: endpoint { - remote-endpoint =3D <&ov5640_0>; - bus-type =3D ; - bus-width =3D <8>; - hsync-active =3D <0>; - vsync-active =3D <0>; - pclk-sample =3D <1>; - }; + dcmi_0: endpoint { + remote-endpoint =3D <&ov5640_0>; + bus-type =3D ; + bus-width =3D <8>; + hsync-active =3D <0>; + vsync-active =3D <0>; + pclk-sample =3D <1>; + }; }; }; =20 diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml b= /Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml index 162a0c526d5d..0bf7c674dd97 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml @@ -120,13 +120,13 @@ examples: clocks =3D <&rcc DCMIPP_K>; =20 port { - endpoint { - remote-endpoint =3D <&mipid02_2>; - bus-width =3D <8>; - hsync-active =3D <0>; - vsync-active =3D <0>; - pclk-sample =3D <0>; - }; + endpoint { + remote-endpoint =3D <&mipid02_2>; + bus-width =3D <8>; + hsync-active =3D <0>; + vsync-active =3D <0>; + pclk-sample =3D <0>; + }; }; }; =20 diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Document= ation/devicetree/bindings/media/ti,cal.yaml index f1a940a110d2..c223b4f2d75a 100644 --- a/Documentation/devicetree/bindings/media/ti,cal.yaml +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml @@ -136,17 +136,17 @@ examples: ti,camerrx-control =3D <&scm_conf 0xE94>; =20 ports { - #address-cells =3D <1>; - #size-cells =3D <0>; + #address-cells =3D <1>; + #size-cells =3D <0>; =20 - csi2_0: port@0 { - reg =3D <0>; - csi2_phy0: endpoint { - remote-endpoint =3D <&csi2_cam0>; - clock-lanes =3D <0>; - data-lanes =3D <1 2>; - }; - }; + csi2_0: port@0 { + reg =3D <0>; + csi2_phy0: endpoint { + remote-endpoint =3D <&csi2_cam0>; + clock-lanes =3D <0>; + data-lanes =3D <1 2>; + }; + }; }; }; =20 @@ -156,21 +156,21 @@ examples: #size-cells =3D <0>; =20 camera-sensor@3c { - compatible =3D "ovti,ov5640"; - reg =3D <0x3c>; - AVDD-supply =3D <®_2p8v>; - DOVDD-supply =3D <®_1p8v>; - DVDD-supply =3D <®_1p5v>; - clocks =3D <&clk_ov5640_fixed>; - clock-names =3D "xclk"; + compatible =3D "ovti,ov5640"; + reg =3D <0x3c>; + AVDD-supply =3D <®_2p8v>; + DOVDD-supply =3D <®_1p8v>; + DVDD-supply =3D <®_1p5v>; + clocks =3D <&clk_ov5640_fixed>; + clock-names =3D "xclk"; =20 - port { - csi2_cam0: endpoint { - remote-endpoint =3D <&csi2_phy0>; - clock-lanes =3D <0>; - data-lanes =3D <1 2>; - }; - }; + port { + csi2_cam0: endpoint { + remote-endpoint =3D <&csi2_phy0>; + clock-lanes =3D <0>; + data-lanes =3D <1 2>; + }; + }; }; }; =20 --=20 2.53.0