From nobody Tue Sep 29 02:34:37 2026 Received: from mx0a-0016f401.pphosted.com (mx0a-0016f401.pphosted.com [67.231.148.174]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 46C51442FC2; Thu, 13 Aug 2026 08:28:46 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=67.231.148.174 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1786609728; cv=none; b=mGOM/97o/1RXYIOvvErp8MEk8QJ+K8fc1rgPpJSBp09516am0jJz8XyEtIn6TnljaiY2rPVPPBm5UO9pfLcpjGjA2hLC1sMMJWkfWI8hz+3PYYw2VIlIWx/ZzmoZcETOJC7SmUx4BM+/3W/VMGevvYOXFYasfoIBC50AaYs9iKY= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1786609728; c=relaxed/simple; bh=rBAbGGYg11cD5i5Ggvac0f58jCrV3WG51IsNg6GRoTw=; h=From:To:CC:Subject:Date:Message-ID:MIME-Version:Content-Type; b=l5sYXl5GTyWYhgQ56Ky24NLgUHBC/UpCc/xnP2EcE6Quw+D58oEtsyohVZ1+bVw0l7purdc1GCVVfYlkBnZQof3/j7V3+a/7FhN7perMIKtMLWASy9PWoZChhkkyT+KP6uJYVONPbjYNy0IA4+PrCFv4LNbxMvRyGEXgNqU+gZo= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=marvell.com; spf=pass smtp.mailfrom=marvell.com; dkim=pass (2048-bit key) header.d=marvell.com header.i=@marvell.com header.b=etF/kct1; arc=none smtp.client-ip=67.231.148.174 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=marvell.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=marvell.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=marvell.com header.i=@marvell.com header.b="etF/kct1" Received: from pps.filterd (m0431384.ppops.net [127.0.0.1]) by mx0a-0016f401.pphosted.com (8.18.1.11/8.18.1.11) with ESMTP id 67D5fHie160730; Thu, 13 Aug 2026 01:28:13 -0700 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=marvell.com; h= cc:content-transfer-encoding:content-type:date:from:message-id :mime-version:subject:to; s=pfpt0220; bh=Um0LkKPf139xziJLSH8+9Yy ZhlCMFr67NE6drGKW0Yk=; b=etF/kct1nxGx80WFDb2WTqtelvPe7Cqk+VbsY+v +siXt5VsvNHf7xk7ksavXgtRelRnSh72fbgn9R60i93ZYS7cazp8/eXkN6UlIiqJ 4yexU5Ttr9FXAypJIofJSyVDcaYs55/vj8ofSdhQLqtUWGzPTagKqSsFiCMOByVs oan0hZIVTM/v8DNuucVcu+SvfTkE0PWhoWLr+OwHxtT6nJNM1y3Vo0Q2PRqGVGEe nWcFzDEMPvKRqhSq10E3EJd001rKpcFTgr5l7hejJT6t1rkJ+0FWTuCegCDF7uqZ hgC1qcFTKj2i/kZ40e2XpekOFg1j698+H++i8jLL793Dc9w== Received: from dc6wp-exch02.marvell.com ([4.21.29.225]) by mx0a-0016f401.pphosted.com (PPS) with ESMTPS id 4g0v4xanbg-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 13 Aug 2026 01:28:13 -0700 (PDT) Received: from DC6WP-EXCH02.marvell.com (10.76.176.209) by DC6WP-EXCH02.marvell.com (10.76.176.209) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.25; Thu, 13 Aug 2026 01:28:11 -0700 Received: from maili.marvell.com (10.69.176.80) by DC6WP-EXCH02.marvell.com (10.76.176.209) with Microsoft SMTP Server id 15.2.1544.25 via Frontend Transport; Thu, 13 Aug 2026 01:28:11 -0700 Received: from rkannoth-OptiPlex-7090.. (unknown [10.28.36.165]) by maili.marvell.com (Postfix) with ESMTP id DCF975B6925; Thu, 13 Aug 2026 01:28:06 -0700 (PDT) From: Ratheesh Kannoth To: , , CC: , , , , , , , , , , , Ratheesh Kannoth Subject: [PATCH v8 net-next] octeontx2-pf: add mqprio bandwidth offload for NIX TX schedulers Date: Thu, 13 Aug 2026 13:57:54 +0530 Message-ID: <20260813082754.1165329-1-rkannoth@marvell.com> X-Mailer: git-send-email 2.43.0 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Proofpoint-Spam-Details-Enc: AW1haW4tMjYwODEzMDA1OCBTYWx0ZWRfX3GNIKZtFrzmy wz+aVEmNtPghUgkQObHZJMVl6pwMWphIJEvJIW56ylp9EamaY4yfWfLP7j97vyX8vmAwljxqfoB GDBNYAPetQryHxSQxsBu2usBC/vKQwPGbfpe46A1ry069dSNnJyuvFcx7otdXOxY2rHaOZ5Nqe0 xSD+awepWx/s7/Q6KfmJgtTJU20bVIlv+1/8sqLWzcqiH8qkx79lG5/u2Y46KOORAvCTts3HBsR URcUSKwTg6CMl9/8Y5dc4tYdoy+qJG5HznL4xmYE7bA8XU6QIA6qJJpqO2tpA/QjJpercy6+x52 OIuJGMgxfhNU0aDDIFUbuEcLlKFl9g+9AbquiMHjgU2e3JG7YmK+NqT3sjlxXBIkF+XQBpR4ahz YNPKW9PafcvF2SCD6fzm4hjdzyiQLBUejjhONpEcZrUU/iG8cCgGACHE+lCvMv2BdfiKRGN6z62 ic1aJzuS3kdtx6sSBig== X-Proofpoint-Spam-Info: AW1haW4tMjYwODEzMDA1OCBTYWx0ZWRfX7XurpC5h14UJ aBCKwZ+hw9jua7KT+3eGDhePfgz4JF5koxl/Qgz6x5c8urCDGDCD4jbAALgo+7eTIUofCcpPalz DRllLo/xs93YtpdmmKFv+QAvUSmTzto= X-Proofpoint-ORIG-GUID: Owr-wDWLQm2GAMrv6UNIqDqOmkv7LJ3R X-Authority-Analysis: v=2.4 cv=B/yJFutM c=1 sm=1 tr=0 ts=6a7d801d cx=c_pps a=gIfcoYsirJbf48DBMSPrZA==:117 a=gIfcoYsirJbf48DBMSPrZA==:17 a=Sv0fKeRqtYgA:10 a=VkNPw1HP01LnGYTKEx00:22 a=l0iWHRpgs5sLHlkKQ1IR:22 a=TtqV-g6YmW1Jfm2GSLaY:22 a=c92rfblmAAAA:8 a=M5GUcnROAAAA:8 a=VwQbUJbxAAAA:8 a=uzq9xtPq4nBHc1YbRxMA:9 a=GvGzcOZaWPEFPQC_NcjD:22 a=OBjm3rFKGHvpk9ecZwUJ:22 X-Proofpoint-GUID: Owr-wDWLQm2GAMrv6UNIqDqOmkv7LJ3R X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1176,Hydra:6.1.134,FMLib:17.12.100.49 definitions=2026-08-13_02,2026-08-12_01,2025-10-01_01 Content-Type: text/plain; charset="utf-8" Add TC_SETUP_QDISC_MQPRIO handling to offload per-queue MDQ CIR/PIR shaping for mqprio channel mode with TC_MQPRIO_SHAPER_BW_RATE. When bandwidth offload is enabled, allocate one SMQ per non-QoS transmit queue, parent all MDQs under TL4[0], and program min/max rates by dividing each traffic class byte/s limit across its queues. Setting up or tearing down the offload restarts the netdev via ndo_stop()/ndo_open() to rebuild the TX scheduler hierarchy. That clears carrier, tears down IRQ/NAPI and drops in-flight traffic; if ndo_open() fails the interface is left administratively down. Offload setup is rejected unless the interface is already running. Reject incompatible configurations (HTB, PFC, XDP, SDP rep, missing CIR+PIR support) and out-of-range rates. Validate queue mappings against hw.non_qos_queues and reject per-TC rates smaller than the queue count that integer division would truncate to zero. Track offload state in mqprio_rate_limit instead of pfvf->flags to avoid races with the mbox up-handler, skip spurious teardown on tc qdisc replace, and clear all MDQ shapers before applying a new mapping so queues dropped from a TC layout do not retain stale limits. Restore cached shapers across routine netdev stop/open via otx2_mqprio_up(). Signed-off-by: Ratheesh Kannoth --- v7 -> v8: Addressed Sashiko comments https://sashiko.dev/#/patchset/20260811085050.3212280-1-rkannoth%40marvell= .com v6 -> v7: Addressed Sashiko comments https://sashiko.dev/#/message/20260810034738.1786029-1-rkannoth%40marvell.= com v5 -> v6: Addressed Sashiko comments https://lore.kernel.org/netdev/20260806095434.1144397-1-rkannoth@marvell.c= om/ v4 -> v5: Addressed sashiko comments https://sashiko.dev/#/patchset/20260803042724.3380209-1-rkannoth%40marvell= .com v3 -> v4: Addressed sashiko comments https://lore.kernel.org/netdev/20260729105139.2302908-1-rkannoth@marvell.c= om/ v2 -> v3: Addressed sashiko comments https://lore.kernel.org/netdev/amnYX866mYx02cBe@rkannoth-OptiPlex-7090/T/#= m67310cbec48b21c7720858ab3a1ea083a0f8dc10 v1 -> v2: Addressed sashiko comments https://lore.kernel.org/netdev/20260724075010.2665758-1-rkannoth@marvell.c= om/ --- .../ethernet/marvell/octeontx2/af/rvu_nix.c | 6 +- .../marvell/octeontx2/nic/otx2_common.c | 154 ++++- .../marvell/octeontx2/nic/otx2_common.h | 16 + .../marvell/octeontx2/nic/otx2_dcbnl.c | 6 + .../marvell/octeontx2/nic/otx2_ethtool.c | 8 + .../ethernet/marvell/octeontx2/nic/otx2_pf.c | 17 + .../ethernet/marvell/octeontx2/nic/otx2_tc.c | 591 ++++++++++++++++++ .../net/ethernet/marvell/octeontx2/nic/qos.c | 15 + .../net/ethernet/marvell/octeontx2/nic/qos.h | 1 + 9 files changed, 812 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/= net/ethernet/marvell/octeontx2/af/rvu_nix.c index b81c47ea023b..22f64c1ede91 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -331,8 +331,12 @@ static bool is_valid_txschq(struct rvu *rvu, int blkad= dr, return true; } =20 - if (map_func !=3D pcifunc) + if (map_func !=3D pcifunc) { + dev_err_ratelimited(rvu->dev, + "pcifunc %x map pcifunc %x not equal, lvl=3D%u schq=3D%u\n", + pcifunc, map_func, lvl, schq); return false; + } =20 return true; } diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/dri= vers/net/ethernet/marvell/octeontx2/nic/otx2_common.c index ca73a94db794..b6d8ee7e2d4c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c @@ -614,6 +614,142 @@ void otx2_get_mac_from_af(struct net_device *netdev) } EXPORT_SYMBOL(otx2_get_mac_from_af); =20 +static int +otx2_nix_tmq_reg_write(struct otx2_nic *pfvf, int cnt, + u64 reg_addr[MAX_REGS_PER_MBOX_MSG], + u64 reg_val[MAX_REGS_PER_MBOX_MSG]) +{ + struct mbox *mbox =3D &pfvf->mbox; + struct nix_txschq_config *req; + int i, err; + + mutex_lock(&mbox->lock); + req =3D otx2_mbox_alloc_msg_nix_txschq_cfg(mbox); + if (!req) { + mutex_unlock(&mbox->lock); + return -ENOMEM; + } + + req->lvl =3D NIX_TXSCH_LVL_MDQ; + req->num_regs =3D cnt; + + for (i =3D 0; i < cnt; i++) { + req->reg[i] =3D reg_addr[i]; + req->regval[i] =3D reg_val[i]; + } + + err =3D otx2_sync_mbox_msg(mbox); + mutex_unlock(&mbox->lock); + + return err; +} + +int otx2_nix_tm_clear_queue_shaper(struct otx2_nic *pfvf) +{ + u64 reg_addr[MAX_REGS_PER_MBOX_MSG]; + u64 reg_val[MAX_REGS_PER_MBOX_MSG]; + int err, smq, i, cnt =3D 0; + + for (i =3D 0; i < pfvf->hw.txschq_cnt[NIX_TXSCH_LVL_SMQ]; i++) { + smq =3D pfvf->hw.txschq_list[NIX_TXSCH_LVL_SMQ][i]; + + reg_addr[cnt] =3D NIX_AF_MDQX_PIR(smq); + reg_val[cnt] =3D 0; + cnt++; + + reg_addr[cnt] =3D NIX_AF_MDQX_CIR(smq); + reg_val[cnt] =3D 0; + cnt++; + + if (cnt < MAX_REGS_PER_MBOX_MSG - 1) + continue; + + err =3D otx2_nix_tmq_reg_write(pfvf, cnt, + reg_addr, reg_val); + if (err) + goto fail; + cnt =3D 0; + } + + if (cnt) { + err =3D otx2_nix_tmq_reg_write(pfvf, cnt, + reg_addr, reg_val); + if (err) + goto fail; + } + + return 0; +fail: + return err; +} + +int otx2_nix_tm_set_queue_shaper(struct otx2_nic *pfvf, + int txq, u64 minrate, u64 maxrate) +{ + struct mbox *mbox =3D &pfvf->mbox; + struct nix_txschq_config *req; + int err, smq, n =3D 0; + u64 reg_addr[2]; + u64 reg_val[2]; + u64 rate; + + if (!maxrate && !minrate) { + smq =3D otx2_get_smq_idx(pfvf, txq); + reg_addr[0] =3D NIX_AF_MDQX_PIR(smq); + reg_val[0] =3D 0; + reg_addr[1] =3D NIX_AF_MDQX_CIR(smq); + reg_val[1] =3D 0; + return otx2_nix_tmq_reg_write(pfvf, 2, reg_addr, reg_val); + } + + smq =3D otx2_get_smq_idx(pfvf, txq); + + mutex_lock(&mbox->lock); + req =3D otx2_mbox_alloc_msg_nix_txschq_cfg(mbox); + if (!req) { + mutex_unlock(&mbox->lock); + return -ENOMEM; + } + + req->lvl =3D NIX_TXSCH_LVL_MDQ; + + /* MQPRIO exposes only min/max rate, not burst. Pass burst 0 so + * otx2_get_egress_burst_cfg() programmes the largest burst the NIX + * encoding supports (CN10K_MAX_BURST_SIZE on CN10K). This differs + * from the 65536 byte default used in the HTB path, which is a + * kernel-side default when no explicit burst is configured, not a + * hardware cap. + * + * mqprio setup restarts the netdev (otx2_mqprio_restart_netdev), + * which resets MDQ shapers to zero. Program both PIR and CIR on + * every update so omitted rates are applied explicitly rather than + * relying on stale hardware state. + */ + req->reg[n] =3D NIX_AF_MDQX_PIR(smq); + if (maxrate) { + rate =3D otx2_convert_rate(maxrate); + req->regval[n] =3D otx2_get_txschq_rate_regval(pfvf, rate, 0); + } else { + req->regval[n] =3D 0; + } + n++; + + /* CIR+PIR support is required and checked at mqprio setup. */ + req->reg[n] =3D NIX_AF_MDQX_CIR(smq); + if (minrate) { + rate =3D otx2_convert_rate(minrate); + req->regval[n] =3D otx2_get_txschq_rate_regval(pfvf, rate, 0); + } else { + req->regval[n] =3D 0; + } + n++; + req->num_regs =3D n; + + err =3D otx2_sync_mbox_msg(mbox); + mutex_unlock(&mbox->lock); + return err; +} + int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool txsc= hq_for_pfc) { u16 (*schq_list)[MAX_TXSCHQ_PER_FUNC]; @@ -650,7 +786,20 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl,= int prio, bool txschq_for (u64)hw->smq_link_type); req->num_regs++; /* MDQ config */ - parent =3D schq_list[NIX_TXSCH_LVL_TL4][prio]; + if (pfvf->mqprio.rate_limit) { + /* TODO: Program NIX_AF_TL4X_TOPOLOGY on TL4[0]. MQPRIO + * parents every MDQ under the same TL4 with schedule + * priority 0, so sibling arbitration depends on the TL4 + * topology register. Only the HTB path programs this + * today and the AF does not reset it on schq realloc, + * so a TL4 reused after HTB teardown can retain stale + * RR_PRIO/PRIO_ANCHOR and starve some TX queues. + */ + parent =3D schq_list[NIX_TXSCH_LVL_TL4][0]; + } else { + parent =3D schq_list[NIX_TXSCH_LVL_TL4][prio]; + } + req->reg[1] =3D NIX_AF_MDQX_PARENT(schq); req->regval[1] =3D parent << 16; req->num_regs++; @@ -778,6 +927,9 @@ int otx2_txsch_alloc(struct otx2_nic *pfvf) req->schq[NIX_TXSCH_LVL_TL4] =3D chan_cnt; } =20 + if (pfvf->mqprio.rate_limit) + req->schq[NIX_TXSCH_LVL_SMQ] =3D pfvf->hw.non_qos_queues; + rc =3D otx2_sync_mbox_msg(&pfvf->mbox); if (rc) return rc; diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/dri= vers/net/ethernet/marvell/octeontx2/nic/otx2_common.h index eecee612b7b2..67d4aae9440f 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h @@ -483,6 +483,13 @@ struct pf_irq_data { int mdevs; }; =20 +struct otx2_mqprio { + u32 flags; + u64 *min_rate; + u64 *max_rate; + bool rate_limit; +}; + struct otx2_nic { void __iomem *reg_base; struct net_device *netdev; @@ -515,6 +522,10 @@ struct otx2_nic { u64 flags; u64 *cq_op_addr; =20 + struct otx2_mqprio mqprio; + bool mqprio_replace_pending; + bool mqprio_skip_teardown; + struct bpf_prog *xdp_prog; struct otx2_qset qset; struct otx2_hw hw; @@ -1246,6 +1257,11 @@ dma_addr_t otx2_dma_map_skb_frag(struct otx2_nic *pf= vf, struct sk_buff *skb, int seg, int *len); void otx2_dma_unmap_skb_frags(struct otx2_nic *pfvf, struct sg_list *sg); int otx2_read_free_sqe(struct otx2_nic *pfvf, u16 qidx); +int otx2_nix_tm_set_queue_shaper(struct otx2_nic *pfvf, int txq, + u64 minrate, u64 maxrate); +int otx2_nix_tm_clear_queue_shaper(struct otx2_nic *pfvf); +int otx2_mqprio_down(struct otx2_nic *pfvf); +int otx2_mqprio_up(struct otx2_nic *pfvf); void otx2_queue_vf_work(struct mbox *mw, struct workqueue_struct *mbox_wq, int first, int mdevs, u64 intr); int otx2_del_mcam_flow_entry(struct otx2_nic *nic, u16 entry, diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c b/driv= ers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c index f110dfa42360..4a70abc230be 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c @@ -413,6 +413,12 @@ static int otx2_dcbnl_ieee_setpfc(struct net_device *d= ev, struct ieee_pfc *pfc) u8 old_pfc_en; int err; =20 + if (pfvf->mqprio.rate_limit && pfc->pfc_en) { + netdev_err(dev, + "PFC: cannot enable while mqprio bandwidth offload is active\n"); + return -EOPNOTSUPP; + } + old_pfc_en =3D pfvf->pfc_en; pfvf->pfc_en =3D pfc->pfc_en; =20 diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/dr= ivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c index a0340f3422bf..837d29024981 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c @@ -287,6 +287,14 @@ static int otx2_set_channels(struct net_device *dev, return -EINVAL; } =20 + if (pfvf->mqprio.rate_limit && + (channel->tx_count !=3D pfvf->hw.tx_queues || + channel->rx_count !=3D pfvf->hw.rx_queues)) { + netdev_info(dev, + "Not permitted to change channel count while MQ prio is active\n"); + return -EINVAL; + } + if (if_up) dev->netdev_ops->ndo_stop(dev); =20 diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers= /net/ethernet/marvell/octeontx2/nic/otx2_pf.c index c995f2900859..06cb44e7263c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1980,6 +1980,16 @@ int otx2_open(struct net_device *netdev) if (err) goto err_free_mem; =20 + /* TODO: otx2_mqprio_up() failure here aborts the entire ndo_open() + * path even though mqprio_rate_limit and the rate cache remain set. + * Routine ip link set up or driver reset with active mqprio offload + * can leave the interface stuck down until the qdisc is removed and + * reapplied. + */ + err =3D otx2_mqprio_up(pf); + if (err) + goto err_free_hw; + /* Register NAPI handler */ for (qidx =3D 0; qidx < pf->hw.cint_cnt; qidx++) { cq_poll =3D &qset->napi[qidx]; @@ -2140,6 +2150,7 @@ int otx2_open(struct net_device *netdev) free_irq(vec, pf); err_disable_napi: otx2_disable_napi(pf); +err_free_hw: otx2_free_hw_resources(pf); err_free_mem: otx2_free_queue_mem(qset); @@ -2846,6 +2857,12 @@ static int otx2_xdp_setup(struct otx2_nic *pf, struc= t bpf_prog *prog) bool if_up =3D netif_running(pf->netdev); struct bpf_prog *old_prog; =20 + if (prog && pf->mqprio.rate_limit) { + netdev_err(dev, + "XDP: cannot attach while mqprio bandwidth offload is active\n"); + return -EOPNOTSUPP; + } + if (prog && dev->mtu > MAX_XDP_MTU) { netdev_warn(dev, "Jumbo frames not yet supported with XDP\n"); return -EOPNOTSUPP; diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c b/drivers= /net/ethernet/marvell/octeontx2/nic/otx2_tc.c index 039fd47ebf52..fc9677e34065 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include =20 #include "cn10k.h" #include "otx2_common.h" @@ -31,6 +33,10 @@ =20 #define MCAST_INVALID_GRP (-1U) #define RATE_MANTISSA_BITS 8 +/* Min per-queue egress shaping rate the NIX TLX encoder supports (2 Mbps)= . */ +#define OTX2_MQPRIO_MIN_RATE_BYTES_PS 250000ULL +/* Max egress shaping rate the NIX TLX encoder supports (130816 Mbps). */ +#define OTX2_MQPRIO_MAX_RATE_BYTES_PS ((MAX_BURST_SIZE * 1000000ULL) / 8UL= L) =20 static void otx2_get_egress_burst_cfg(struct otx2_nic *nic, u32 burst, u32 *burst_exp, u32 *burst_mantissa) @@ -61,6 +67,9 @@ static void otx2_get_egress_burst_cfg(struct otx2_nic *ni= c, u32 burst, *burst_mantissa =3D tmp / (1ULL << (*burst_exp - 7)); } } else { + /* burst 0: largest encodable burst (CN10K_MAX_BURST_SIZE on + * CN10K), not a minimal burst. + */ *burst_exp =3D MAX_BURST_EXPONENT; *burst_mantissa =3D max_mantissa; } @@ -1600,14 +1609,596 @@ static int otx2_setup_tc_block(struct net_device *= netdev, nic, nic, ingress); } =20 +/* Free the per-queue min/max rate caches. */ +static void otx2_mqprio_free_cache(struct otx2_nic *pfvf) +{ + devm_kfree(pfvf->dev, pfvf->mqprio.min_rate); + devm_kfree(pfvf->dev, pfvf->mqprio.max_rate); + pfvf->mqprio.min_rate =3D NULL; + pfvf->mqprio.max_rate =3D NULL; + pfvf->mqprio.flags =3D 0; +} + +static int otx2_mqprio_alloc_cache(struct otx2_nic *pfvf) +{ + u16 num_txq =3D pfvf->hw.non_qos_queues; + + /* TODO: otx2_mqprio_free_cache() here drops the committed rate cache + * on tc qdisc replace before the new mapping is complete. Stage the + * incoming rates separately and commit only after replace succeeds so + * a failure after netdev restart can roll back from the prior cache. + */ + otx2_mqprio_free_cache(pfvf); + + pfvf->mqprio.min_rate =3D devm_kcalloc(pfvf->dev, num_txq, + sizeof(*pfvf->mqprio.min_rate), + GFP_KERNEL); + pfvf->mqprio.max_rate =3D devm_kcalloc(pfvf->dev, num_txq, + sizeof(*pfvf->mqprio.max_rate), + GFP_KERNEL); + if (!pfvf->mqprio.min_rate || !pfvf->mqprio.max_rate) { + otx2_mqprio_free_cache(pfvf); + return -ENOMEM; + } + + return 0; +} + +static bool otx2_txschq_is_allocated(struct otx2_nic *pfvf) +{ + int lvl, idx; + + for (lvl =3D 0; lvl < NIX_TXSCH_LVL_CNT; lvl++) { + for (idx =3D 0; idx < pfvf->hw.txschq_cnt[lvl]; idx++) { + if (pfvf->hw.txschq_list[lvl][idx]) + return true; + } + } + + return false; +} + +/* Tear down mqprio bandwidth offload: clear per-queue shapers, + * mqprio_rate_limit, netdev TC mappings, and the cached rates. Called on + * explicit mqprio teardown (tc qdisc del) and error cleanup, not on + * routine netdev stop/open cycles where the offload stays active. + */ +int otx2_mqprio_down(struct otx2_nic *pfvf) +{ + struct net_device *netdev =3D pfvf->netdev; + int err =3D 0; + + if (!pfvf->mqprio.rate_limit) + return 0; + + if (otx2_txschq_is_allocated(pfvf)) + err =3D otx2_nix_tm_clear_queue_shaper(pfvf); + + /* TODO: mqprio_down() clears mqprio_rate_limit, netdev TC mappings, + * and the rate cache even when otx2_nix_tm_clear_queue_shaper() fails + * partway through the MDQ batch. Software then reports offload as + * inactive while some queues may retain programmed CIR/PIR, so a later + * mqprio_up() or re-setup can shape with the wrong effective rates. + */ + pfvf->mqprio.rate_limit =3D false; + pfvf->mqprio_replace_pending =3D false; + pfvf->mqprio_skip_teardown =3D false; + netdev_set_num_tc(netdev, 0); + otx2_mqprio_free_cache(pfvf); + + return err; +} + +int otx2_mqprio_up(struct otx2_nic *pfvf) +{ + struct net_device *netdev =3D pfvf->netdev; + int txq, err; + + if (!pfvf->mqprio.rate_limit) + return 0; + + if (!pfvf->mqprio.min_rate || !pfvf->mqprio.max_rate) + return 0; + + for (txq =3D 0; txq < pfvf->hw.non_qos_queues; txq++) { + u64 min_rate =3D 0, max_rate =3D 0; + + if (pfvf->mqprio.flags & TC_MQPRIO_F_MIN_RATE) + min_rate =3D pfvf->mqprio.min_rate[txq]; + if (pfvf->mqprio.flags & TC_MQPRIO_F_MAX_RATE) + max_rate =3D pfvf->mqprio.max_rate[txq]; + + if (!min_rate && !max_rate) + continue; + + err =3D otx2_nix_tm_set_queue_shaper(pfvf, txq, min_rate, + max_rate); + if (err) { + netdev_err(netdev, + "mqprio: failed to restore shaper for txq %d: %d\n", + txq, err); + return err; + } + } + + return 0; +} + +/* Restart the netdev to reprogram the TX scheduler hierarchy for mqprio + * bandwidth offload. Both mqprio add and delete (when offload was active) + * take this path via ndo_stop()/ndo_open() so VF-specific open logic (e.g. + * LBK carrier on) runs correctly. The full stop/open cycle clears + * carrier, stops all TX queues, tears down IRQs/NAPI and drops in-flight + * traffic. If open fails, the interface is left administratively down + * without calling ndo_stop() again on resources already torn down by + * the open error path. + */ +static int otx2_mqprio_restart_netdev(struct net_device *netdev, bool rate= _limit) +{ + struct otx2_nic *pfvf =3D netdev_priv(netdev); + const struct net_device_ops *ops =3D netdev->netdev_ops; + bool up =3D netdev->flags & IFF_UP; + int err; + + /* TODO: Every mqprio add, replace, and delete runs a full ndo_stop()/ + * ndo_open() cycle (carrier drop, IRQ/NAPI teardown, in-flight traffic + * loss) to reprogram the TX scheduler. If ndo_open() fails the + * interface is left administratively down (OTX2_FLAG_INTF_DOWN) until + * manual recovery. Explore live reprogramming without bouncing the + * netdev. + */ + netdev_info(netdev, + "mqprio: restarting interface to reprogram TX scheduler; in-flight t= raffic will be dropped\n"); + + if (up) + dev_deactivate(netdev, true); + + err =3D ops->ndo_stop(netdev); + if (err) + goto out_activate; + + /* Set before ndo_open() so otx2_txsch_alloc() widens SMQ allocation. */ + if (rate_limit) + pfvf->mqprio.rate_limit =3D true; + + err =3D ops->ndo_open(netdev); + if (err) { + int down_err; + + netdev_err(netdev, + "Failed to restart device after mqprio change: %d\n", + err); + down_err =3D otx2_mqprio_down(pfvf); + if (down_err) + netdev_err(netdev, + "mqprio: failed to clear shapers after restart error: %d\n", + down_err); + /* ndo_open() rolls back on failure; mark the interface down so + * netif_close() does not invoke ndo_stop() on freed NAPI/queue + * state. Caller holds RTNL; dev_close() would deadlock. + */ + pfvf->flags |=3D OTX2_FLAG_INTF_DOWN; + /* visible to otx2_stop() on other cpus */ + smp_wmb(); + netif_close(netdev); + return err; + } + +out_activate: + if (up && !err) + dev_activate(netdev); + + return err; +} + +static u64 otx2_mqprio_per_queue_rate(u64 rate, u32 qcount) +{ + if (!rate || qcount <=3D 1) + return rate; + + return div_u64(rate, qcount); +} + +static int otx2_mqprio_validate_tc_rate(struct net_device *netdev, + struct netlink_ext_ack *extack, + u64 rate, u32 qcount, int tc, + const char *name) +{ + if (!rate || qcount <=3D 1 || rate >=3D qcount) + return 0; + + netdev_err(netdev, + "mqprio: %s rate %llu for tc %d too small for %u queues\n", + name, rate, tc, qcount); + NL_SET_ERR_MSG_FMT_MOD(extack, + "mqprio: %s rate %llu for tc %d too small for %u queues", + name, rate, tc, qcount); + return -EINVAL; +} + +static int otx2_mqprio_validate_txqs(struct net_device *netdev, + struct netlink_ext_ack *extack, + struct tc_mqprio_qopt *qopt) +{ + struct otx2_nic *pfvf =3D netdev_priv(netdev); + u16 num_txq =3D pfvf->hw.non_qos_queues; + int tc, txq; + + if (qopt->num_tc > num_txq) { + netdev_err(netdev, "Number of TCs (%u) exceeds hw queues %u\n", + qopt->num_tc, num_txq); + NL_SET_ERR_MSG_FMT_MOD(extack, + "Number of TCs (%u) exceeds hw queues %u", + qopt->num_tc, num_txq); + return -EINVAL; + } + + if (num_txq > MAX_TXSCHQ_PER_FUNC) { + netdev_err(netdev, + "Number of queues (%u) exceeds max scheduler queues %u\n", + num_txq, MAX_TXSCHQ_PER_FUNC); + NL_SET_ERR_MSG_FMT_MOD(extack, + "Number of queues (%u) exceeds max scheduler queues %u", + num_txq, MAX_TXSCHQ_PER_FUNC); + return -EINVAL; + } + + for (tc =3D 0; tc < qopt->num_tc; tc++) { + u32 qcount =3D qopt->count[tc]; + + for (txq =3D qopt->offset[tc]; + txq < qopt->offset[tc] + qcount; txq++) { + if (txq >=3D num_txq) { + netdev_err(netdev, + "mqprio: txq %d exceeds offload queue count %u\n", + txq, num_txq); + NL_SET_ERR_MSG_FMT_MOD(extack, + "mqprio: txq %d exceeds offload queue count %u", + txq, num_txq); + return -EINVAL; + } + } + } + + return 0; +} + +static bool otx2_mqprio_rate_valid(u64 rate_bytes_ps) +{ + u64 mbps; + + if (!rate_bytes_ps) + return true; + + if (rate_bytes_ps < OTX2_MQPRIO_MIN_RATE_BYTES_PS) + return false; + + if (rate_bytes_ps > OTX2_MQPRIO_MAX_RATE_BYTES_PS) + return false; + + if (rate_bytes_ps > div_u64(U64_MAX, 8)) + return false; + + mbps =3D otx2_convert_rate(rate_bytes_ps); + return ilog2(mbps / 2) <=3D MAX_RATE_EXPONENT; +} + +static void otx2_mqprio_replace_failed_msg(struct net_device *netdev, + struct netlink_ext_ack *extack) +{ + /* TODO: On failed tc qdisc replace restore the prior rate cache, + * netdev TC mapping, and hardware shapers from a snapshot taken before + * reprogramming instead of leaving the new offload values active while + * the previous mqprio remains the grafted root qdisc. + */ + netdev_err(netdev, + "mqprio: replace failed; new offload values active, old mqprio still = root\n"); + if (extack) + NL_SET_ERR_MSG_MOD(extack, + "mqprio: replace failed; new offload values active, old mqprio stil= l root"); +} + +static int otx2_teardown_tc_mqprio(struct otx2_nic *pfvf, + struct tc_mqprio_qopt_offload *mqprio) +{ + bool had_mqprio =3D pfvf->mqprio.rate_limit; + struct tc_mqprio_qopt *qopt =3D &mqprio->qopt; + struct net_device *netdev =3D pfvf->netdev; + bool if_up =3D netif_running(netdev); + int down_err, err; + + qopt->hw =3D 0; + + /* tc qdisc replace grafts the new mqprio before destroying the old + * one. mqprio_skip_teardown is armed from TC_ROOT_GRAFT so teardown + * from the replaced qdisc is ignored after the new configuration has + * reprogrammed hardware and set mqprio_rate_limit. + */ + if (pfvf->mqprio_skip_teardown) { + pfvf->mqprio_skip_teardown =3D false; + pfvf->mqprio_replace_pending =3D false; + return 0; + } + + if (pfvf->mqprio_replace_pending) { + otx2_mqprio_replace_failed_msg(netdev, NULL); + pfvf->mqprio_replace_pending =3D false; + return -EIO; + } + + /* Skip the netdev restart when mqprio offload was not active. */ + if (!had_mqprio) + return 0; + + down_err =3D otx2_mqprio_down(pfvf); + + if (if_up) { + err =3D otx2_mqprio_restart_netdev(netdev, false); + if (err) + return err; + } + + return down_err; +} + +static int otx2_setup_tc_mqprio(struct net_device *netdev, + struct tc_mqprio_qopt_offload *mqprio) +{ + struct otx2_nic *pfvf =3D netdev_priv(netdev); + struct tc_mqprio_qopt *qopt =3D &mqprio->qopt; + struct netlink_ext_ack *extack =3D mqprio->extack; + bool replacing =3D pfvf->mqprio.rate_limit; + bool if_up =3D netif_running(netdev); + int tc, txq, err, i; + + if (!qopt->hw) + return otx2_teardown_tc_mqprio(pfvf, mqprio); + + if (!if_up) { + netdev_err(netdev, "mqprio: setup requires interface UP\n"); + NL_SET_ERR_MSG_MOD(extack, "mqprio: setup requires interface UP"); + return -EOPNOTSUPP; + } + + if (mqprio->shaper !=3D TC_MQPRIO_SHAPER_BW_RATE) { + netdev_err(netdev, "Unsupported mqprio shaper %#x\n", mqprio->shaper); + NL_SET_ERR_MSG_FMT_MOD(extack, "Unsupported mqprio shaper %#x", + mqprio->shaper); + return -EOPNOTSUPP; + } + + if (!test_bit(QOS_CIR_PIR_SUPPORT, &pfvf->hw.cap_flag)) { + netdev_err(netdev, + "mqprio: bandwidth offload requires CIR+PIR support\n"); + NL_SET_ERR_MSG_MOD(extack, + "mqprio: bandwidth offload requires CIR+PIR support"); + return -EOPNOTSUPP; + } + + if (is_otx2_sdp_rep(pfvf->pdev)) { + netdev_err(netdev, "mqprio: bandwidth offload not supported on SDP rep\n= "); + NL_SET_ERR_MSG_MOD(extack, + "mqprio: bandwidth offload not supported on SDP rep"); + return -EOPNOTSUPP; + } + + if (otx2_qos_htb_active(pfvf)) { + netdev_err(netdev, "mqprio: cannot enable offload while HTB is active\n"= ); + NL_SET_ERR_MSG_MOD(extack, + "mqprio: cannot enable offload while HTB is active"); + return -EOPNOTSUPP; + } + + if (pfvf->pfc_en) { + netdev_err(netdev, + "mqprio: cannot enable offload while PFC is enabled\n"); + NL_SET_ERR_MSG_MOD(extack, + "mqprio: cannot enable offload while PFC is enabled"); + return -EOPNOTSUPP; + } + + if (pfvf->xdp_prog) { + netdev_err(netdev, + "mqprio: cannot enable offload while XDP is active\n"); + NL_SET_ERR_MSG_MOD(extack, + "mqprio: cannot enable offload while XDP is active"); + return -EOPNOTSUPP; + } + + for (tc =3D 0; tc < qopt->num_tc; tc++) { + u64 min_rate =3D 0, max_rate =3D 0; + u32 qcount =3D qopt->count[tc]; + + if (mqprio->flags & TC_MQPRIO_F_MIN_RATE) + min_rate =3D mqprio->min_rate[tc]; + if (mqprio->flags & TC_MQPRIO_F_MAX_RATE) + max_rate =3D mqprio->max_rate[tc]; + + if (min_rate && max_rate && min_rate > max_rate) { + netdev_err(netdev, + "min_rate %llu exceeds max_rate %llu for tc %d\n", + min_rate, max_rate, tc); + NL_SET_ERR_MSG_FMT_MOD(extack, + "min_rate %llu exceeds max_rate %llu for tc %d", + min_rate, max_rate, tc); + return -EINVAL; + } + + if (mqprio->flags & TC_MQPRIO_F_MIN_RATE) { + err =3D otx2_mqprio_validate_tc_rate(netdev, extack, min_rate, + qcount, tc, "min"); + if (err) + return err; + } + + if (mqprio->flags & TC_MQPRIO_F_MAX_RATE) { + err =3D otx2_mqprio_validate_tc_rate(netdev, extack, max_rate, + qcount, tc, "max"); + if (err) + return err; + } + + if (mqprio->flags & TC_MQPRIO_F_MIN_RATE && + !otx2_mqprio_rate_valid(otx2_mqprio_per_queue_rate(min_rate, + qcount))) { + netdev_err(netdev, + "mqprio: min_rate %llu for tc %d is outside hardware limits\n", + min_rate, tc); + NL_SET_ERR_MSG_FMT_MOD(extack, + "mqprio: min_rate %llu for tc %d is outside hardware limits", + min_rate, tc); + return -EINVAL; + } + + if (mqprio->flags & TC_MQPRIO_F_MAX_RATE && + !otx2_mqprio_rate_valid(otx2_mqprio_per_queue_rate(max_rate, + qcount))) { + netdev_err(netdev, + "mqprio: max_rate %llu for tc %d is outside hardware limits\n", + max_rate, tc); + NL_SET_ERR_MSG_FMT_MOD(extack, + "mqprio: max_rate %llu for tc %d is outside hardware limits", + max_rate, tc); + return -EINVAL; + } + } + + err =3D otx2_mqprio_validate_txqs(netdev, extack, qopt); + if (err) + return err; + + err =3D otx2_mqprio_restart_netdev(pfvf->netdev, true); + if (err) + return err; + + /* TODO: Failures from here through the end of init() (e.g. -ENOMEM + * from otx2_mqprio_alloc_cache(), mbox errors from + * otx2_nix_tm_clear_queue_shaper() or otx2_nix_tm_set_queue_shaper()) + * reach cleanup. On tc qdisc replace the old mqprio remains grafted, + * so cleanup returns without rolling back netdev TC mapping, the rate + * cache, or partially reprogrammed hardware shapers. Restore the prior + * configuration instead of calling otx2_mqprio_down() and bouncing the + * interface a second time. + */ + err =3D otx2_mqprio_alloc_cache(pfvf); + if (err) + goto cleanup; + + /* otx2_mqprio_up() may have restored the previous configuration during + * the restart above. Clear every MDQ shaper before applying the new + * mapping so queues dropped from the TC layout do not keep stale + * limits in hardware. + */ + if (otx2_txschq_is_allocated(pfvf)) { + err =3D otx2_nix_tm_clear_queue_shaper(pfvf); + if (err) + goto cleanup; + } + + pfvf->mqprio.flags =3D mqprio->flags; + + for (tc =3D 0; tc < qopt->num_tc; tc++) { + u64 min_rate =3D 0, max_rate =3D 0; + u32 qcount =3D qopt->count[tc]; + + /* Rates omitted from tc mqprio are passed as zero and both MDQ + * shaper registers are programmed; see + * otx2_nix_tm_set_queue_shaper(). + */ + if (mqprio->flags & TC_MQPRIO_F_MIN_RATE) + min_rate =3D otx2_mqprio_per_queue_rate(mqprio->min_rate[tc], + qcount); + if (mqprio->flags & TC_MQPRIO_F_MAX_RATE) + max_rate =3D otx2_mqprio_per_queue_rate(mqprio->max_rate[tc], + qcount); + + for (txq =3D qopt->offset[tc]; + txq < qopt->offset[tc] + qcount; txq++) { + netdev_dbg(netdev, + "mqprio: tc %d txq %d min_rate %llu max_rate %llu\n", + tc, txq, min_rate, max_rate); + + pfvf->mqprio.min_rate[txq] =3D min_rate; + pfvf->mqprio.max_rate[txq] =3D max_rate; + + err =3D otx2_nix_tm_set_queue_shaper(pfvf, txq, + min_rate, max_rate); + if (err) + goto cleanup; + } + } + + netdev_set_num_tc(netdev, qopt->num_tc); + for (i =3D 0; i < qopt->num_tc; i++) + netdev_set_tc_queue(netdev, i, qopt->count[i], qopt->offset[i]); + + qopt->hw =3D TC_MQPRIO_HW_OFFLOAD_TCS; + + if (replacing) + pfvf->mqprio_replace_pending =3D true; + + return 0; + +cleanup: + /* Clear hardware offload on this rejected request so a failed replace + * does not leave tc reporting offload for driver state that was torn + * down while the previous mqprio remains grafted. + */ + qopt->hw =3D 0; + if (replacing) { + otx2_mqprio_replace_failed_msg(netdev, extack); + pfvf->mqprio_replace_pending =3D false; + return err ? err : -EIO; + } + otx2_teardown_tc_mqprio(pfvf, mqprio); + return err; +} + +static int otx2_setup_tc_root(struct otx2_nic *pfvf, + struct tc_root_qopt_offload *root) +{ + switch (root->command) { + case TC_ROOT_GRAFT: + if (root->ingress) + return 0; + if (pfvf->mqprio_replace_pending) { + pfvf->mqprio_skip_teardown =3D true; + pfvf->mqprio_replace_pending =3D false; + } + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int otx2_setup_tc_query_caps(void *type_data) +{ + struct tc_query_caps_base *base =3D type_data; + struct tc_mqprio_caps *caps; + + if (base->type !=3D TC_SETUP_QDISC_MQPRIO) + return -EOPNOTSUPP; + + caps =3D base->caps; + caps->validate_queue_counts =3D true; + + return 0; +} + int otx2_setup_tc(struct net_device *netdev, enum tc_setup_type type, void *type_data) { switch (type) { + case TC_QUERY_CAPS: + return otx2_setup_tc_query_caps(type_data); case TC_SETUP_BLOCK: return otx2_setup_tc_block(netdev, type_data); case TC_SETUP_QDISC_HTB: return otx2_setup_tc_htb(netdev, type_data); + case TC_SETUP_QDISC_MQPRIO: + return otx2_setup_tc_mqprio(netdev, type_data); + case TC_SETUP_ROOT_QDISC: + return otx2_setup_tc_root(netdev_priv(netdev), type_data); default: return -EOPNOTSUPP; } diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/qos.c b/drivers/net= /ethernet/marvell/octeontx2/nic/qos.c index 69c0911e28e9..cf0021788356 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/qos.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/qos.c @@ -118,6 +118,9 @@ static void otx2_config_sched_shaping(struct otx2_nic *= pfvf, /* configure PIR */ maxrate =3D (node->rate > node->ceil) ? node->rate : node->ceil; =20 + /* 65536 is the kernel-side default burst when HTB does not supply an + * explicit value, not the NIX hardware maximum (CN10K_MAX_BURST_SIZE). + */ cfg->regval[*num_regs] =3D otx2_get_txschq_rate_regval(pfvf, maxrate, 65536); (*num_regs)++; @@ -1729,11 +1732,23 @@ void otx2_qos_config_txschq(struct otx2_nic *pfvf) otx2_qos_root_destroy(pfvf); } =20 +bool otx2_qos_htb_active(struct otx2_nic *pfvf) +{ + return otx2_sw_node_find(pfvf, OTX2_QOS_ROOT_CLASSID); +} + int otx2_setup_tc_htb(struct net_device *ndev, struct tc_htb_qopt_offload = *htb) { struct otx2_nic *pfvf =3D netdev_priv(ndev); int res; =20 + if (pfvf->mqprio.rate_limit && + htb->command !=3D TC_HTB_DESTROY) { + NL_SET_ERR_MSG_MOD(htb->extack, + "HTB offload cannot be used with mqprio bandwidth offload active"); + return -EOPNOTSUPP; + } + switch (htb->command) { case TC_HTB_CREATE: return otx2_qos_root_add(pfvf, htb->parent_classid, diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/qos.h b/drivers/net= /ethernet/marvell/octeontx2/nic/qos.h index 221bd0438f60..c777cc42eac9 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/qos.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/qos.h @@ -23,6 +23,7 @@ enum qos_smq_operations { u64 otx2_get_txschq_rate_regval(struct otx2_nic *nic, u64 maxrate, u32 bur= st); =20 int otx2_setup_tc_htb(struct net_device *ndev, struct tc_htb_qopt_offload = *htb); +bool otx2_qos_htb_active(struct otx2_nic *pfvf); int otx2_qos_get_qid(struct otx2_nic *pfvf); void otx2_qos_free_qid(struct otx2_nic *pfvf, int qidx); int otx2_qos_enable_sq(struct otx2_nic *pfvf, int qidx); --=20 2.43.0