From nobody Fri Jul 24 22:55:04 2026 Received: from mail-m15589.qiye.163.com (mail-m15589.qiye.163.com [101.71.155.89]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7C580361972; Wed, 22 Jul 2026 16:18:19 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=101.71.155.89 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1784737103; cv=none; b=P6o/cN2qFU8dGljKxiJQZGXxKzGAGATY7b3gO9ImZN18Tz6qEiXoY9PJ7fHRDoNlcSN/eH8q8U0b66BBGkcpyb8zi6MfqI8rKvUF12huRiNN+Lu/B+iTyIoYTLNHns+g5fyK8YHylr53LoHly+YajOikNqk/Uy8CHv3a3dppuIU= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1784737103; c=relaxed/simple; bh=+qrfvr3yT8Y+h6xVmBZPq0PazhzIv1riYD2bk5pyRCs=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=Pe66briEOaQ3Gvzj3O2SECJjx+qTU4kY41/bifiZl8PLfIvHlYWyTA9+RaCTQZQW5gGJLf6S4WsuuMcitW1kHmPq02km57UlkWQs+GG66Gtth6bgTDrB9EDxWmABJJXUcQhlaThNMkI8pjoKYBUQWfQ5zEVtCnZ0KWtcQ9iWpow= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=thundersoft.com; spf=pass smtp.mailfrom=thundersoft.com; dkim=pass (1024-bit key) header.d=thundersoft.com header.i=@thundersoft.com header.b=MEtjOhxR; arc=none smtp.client-ip=101.71.155.89 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=thundersoft.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=thundersoft.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=thundersoft.com header.i=@thundersoft.com header.b="MEtjOhxR" Received: from [127.0.1.1] (unknown [36.129.139.90]) by smtp.qiye.163.com (Hmail) with ESMTP id 472ee9f2a; Thu, 23 Jul 2026 00:13:02 +0800 (GMT+08:00) From: Hongyang Zhao Date: Thu, 23 Jul 2026 00:12:39 +0800 Subject: [PATCH v2 1/2] arm64: dts: qcom: qcs6490-rubikpi3: Add 3.3 V output supply Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20260723-rubikpi-next-20260615-v2-1-47c5add80114@thundersoft.com> References: <20260723-rubikpi-next-20260615-v2-0-47c5add80114@thundersoft.com> In-Reply-To: <20260723-rubikpi-next-20260615-v2-0-47c5add80114@thundersoft.com> To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Frank Li , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam Cc: Roger Shimizu , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, Hongyang Zhao X-Mailer: b4 0.14.3 X-Developer-Signature: v=1; a=ed25519-sha256; t=1784736781; l=1550; i=hongyang.zhao@thundersoft.com; s=20260127; h=from:subject:message-id; bh=+qrfvr3yT8Y+h6xVmBZPq0PazhzIv1riYD2bk5pyRCs=; b=oz2ULZfi8R8+Snmi+7cy+TzM16AQMtpH7zaFM2ofwGio6V+Vxa+K+A9MbQBUnJlOq+Ztkm8Dy yX7SKGn1EXpBm6uk9ohRGUYZLpSDUEuezehmSWz8pu87vI80eKn9u32 X-Developer-Key: i=hongyang.zhao@thundersoft.com; a=ed25519; pk=D9yL5W9Zj0lPBDAq9gzY++1849VlXuTWAkROzZ88J/4= X-HM-Tid: 0a9f8a9a19fb09d5kunm8c572dff4a6e65 X-HM-MType: 1 X-HM-Spam-Status: e1kfGhgUHx5ZQUpXWQgPGg8OCBgUHx5ZQUlOS1dZFg8aDwILHllBWSg2Ly tZV1koWUFITzdXWRgWCB1ZQUpXWS1ZQUlXWQ8JGhUIEh9ZQVkZQktCVk1JSBpCGksaGU9ITFYVFA kWGhdVEwETFhoSFyQUDg9ZV1kYEgtZQVlITVVKSUJVSkhCVUJLWVdZFhoPEhUdFFlBWU9LSFVKS0 lPT09IVUpLS1VKQktLWQY+ DKIM-Signature: a=rsa-sha256; b=MEtjOhxRMDO9ufmZRgGso47Kro8DZnI8ia6jvALqxlCKOh15zgbgW4ZIluEvnwOOnfTCpTenJ5hcNKDE1g115+xka1wH8CzqNIUF9IvC4i10mcrNDNlEO330eFLSvSCvQndjBW7i+ro35MRe0oD5Rsapga/XaFxlKK6WACvgxss=; c=relaxed/relaxed; s=default; d=thundersoft.com; v=1; bh=CULHXGrS+UglX5eAIXw8WS2hqXjXAHSqusYSImSEm7U=; h=date:mime-version:subject:message-id:from; Describe the GPIO-controlled VCC3V3_OUTPUT rail. This board-level rail supplies the two camera connectors and the 40-pin expansion header. Signed-off-by: Hongyang Zhao Reviewed-by: Bryan O'Donoghue --- .../boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts | 24 ++++++++++++++++++= ++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts b/ar= ch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts index d8a9a7e47bdc..45514918562b 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts @@ -214,6 +214,23 @@ vreg_usbhub_rest_1v8: regulator-usbhub-rest-1v8 { regulator-boot-on; }; =20 + vreg_vcc3v3_output: regulator-vcc3v3-output { + compatible =3D "regulator-fixed"; + + regulator-name =3D "vcc3v3_output"; + regulator-min-microvolt =3D <3300000>; + regulator-max-microvolt =3D <3300000>; + + gpio =3D <&tlmm 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&vcc3v3_output_en>; + pinctrl-names =3D "default"; + + regulator-always-on; + regulator-boot-on; + }; + vph_pwr: regulator-vph-pwr { compatible =3D "regulator-fixed"; =20 @@ -1251,6 +1268,13 @@ usb_eth_power: usb-eth-power-state { bias-disable; }; =20 + vcc3v3_output_en: vcc3v3-output-en-state { + pins =3D "gpio14"; + function =3D "gpio"; + drive-strength =3D <8>; + bias-disable; + }; + wifi_reset_active: wifi-reset-active-state { pins =3D "gpio16"; function =3D "gpio"; --=20 2.43.0 From nobody Fri Jul 24 22:55:04 2026 Received: from mail-m15574.qiye.163.com (mail-m15574.qiye.163.com [101.71.155.74]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id ABC9846E004; Wed, 22 Jul 2026 16:48:41 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=101.71.155.74 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1784738928; cv=none; b=FHoJ2BO8xDsj/FeJn5jzb/0WXf/2hLXDLfft1SyqNLpeXyItVF5WAZVotbiw50dtOOGrloejy5spHOZRdOC1A6vo6IgCVbN04D3rW24YNog85AvXMZhtaMF86y7sAsWMuS6jm/f0N6moyxlE5StU5OwwdYf2J/7nz0lYqSwwLJY= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1784738928; c=relaxed/simple; bh=w8vi2Qu6Lg0xl9BcJ4k/gM3jWdZL5xhUg9zN5K+724I=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=SBkDL6x5SxK78/dmMvmLHUteOdfHIBuZoj+NdZtv2no8mhwDlXLK/dX8FUmA0tssWO309I31kjGIbuO/v4Ccg/gMmZePiqvBoc5X4tjiSoOeYAoJJKKQQRLRb6+3K2gwOAAkxQbuBjy1zNA+XMjpcVkocPtXLc6b84udAUvylQE= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=thundersoft.com; spf=pass smtp.mailfrom=thundersoft.com; dkim=pass (1024-bit key) header.d=thundersoft.com header.i=@thundersoft.com header.b=GsJZMn1Q; arc=none smtp.client-ip=101.71.155.74 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=thundersoft.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=thundersoft.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=thundersoft.com header.i=@thundersoft.com header.b="GsJZMn1Q" Received: from [127.0.1.1] (unknown [36.129.139.90]) by smtp.qiye.163.com (Hmail) with ESMTP id 472ee9f2c; Thu, 23 Jul 2026 00:13:04 +0800 (GMT+08:00) From: Hongyang Zhao Date: Thu, 23 Jul 2026 00:12:40 +0800 Subject: [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rubikpi3: Add IMX219 camera overlays Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20260723-rubikpi-next-20260615-v2-2-47c5add80114@thundersoft.com> References: <20260723-rubikpi-next-20260615-v2-0-47c5add80114@thundersoft.com> In-Reply-To: <20260723-rubikpi-next-20260615-v2-0-47c5add80114@thundersoft.com> To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Frank Li , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam Cc: Roger Shimizu , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, Hongyang Zhao X-Mailer: b4 0.14.3 X-Developer-Signature: v=1; a=ed25519-sha256; t=1784736781; l=7630; i=hongyang.zhao@thundersoft.com; s=20260127; h=from:subject:message-id; bh=w8vi2Qu6Lg0xl9BcJ4k/gM3jWdZL5xhUg9zN5K+724I=; b=aA7fHvrjJqDmZOEtCl+XGBz0VDT3sBBHviSc9zQWx5oo1P23VlV7XRDzTkpXuU34vZAzAw8Qm En6UY1WVnm3DnVF4UP/eofqACociTQs8/927XlKNa+RuOjNE9FCtu2i X-Developer-Key: i=hongyang.zhao@thundersoft.com; a=ed25519; pk=D9yL5W9Zj0lPBDAq9gzY++1849VlXuTWAkROzZ88J/4= X-HM-Tid: 0a9f8a9a1f5909d5kunm8c572dff4a6e6f X-HM-MType: 1 X-HM-Spam-Status: e1kfGhgUHx5ZQUpXWQgPGg8OCBgUHx5ZQUlOS1dZFg8aDwILHllBWSg2Ly tZV1koWUFITzdXWRgWCB1ZQUpXWS1ZQUlXWQ8JGhUIEh9ZQVlDThhNVhpCS0tDTE1NQk9OQlYVFA kWGhdVEwETFhoSFyQUDg9ZV1kYEgtZQVlITVVKSUJVSkhCVUJLWVdZFhoPEhUdFFlBWU9LSFVKS0 lPT09IVUpLS1VKQktLWQY+ DKIM-Signature: a=rsa-sha256; b=GsJZMn1QIczUiS9Z0aMfLZpMAImK5xfZw8w30iaKn0ituKXE7iHE0k2L0CEd5VytSVMkGBGzDMenaXrgbG/gxc0W3TbqoAk/2KCCgd9+7ZxeJikQD+TrPjPpPntyEq2Y+RGVqJrpE0A1hxzccpsXiGlYx6ZNX/Y6pxt9tmlfD3Q=; c=relaxed/relaxed; s=default; d=thundersoft.com; v=1; bh=vWKg1OcG8yy6zm9ENl1TpleNXXVl9wMChbj1z8MRdUI=; h=date:mime-version:subject:message-id:from; RUBIK Pi 3 ships without camera sensors, and its two connectors support multiple modules. Keep module-specific nodes out of the base board DTS and add per-connector overlays for Raspberry Pi Camera Module V2 IMX219 sensors. CAM1 uses CCI1 and CSIPHY1, while CAM2 uses CCI0 and CSIPHY4. Each overlay describes the 24 MHz sensor input clock and the three sensor rails derived from the switched 3.3 V connector supply. Describe each connector CAMERA_GPIO signal as a privacy indicator LED and associate it with the corresponding sensor. This lets the V4L2 core control the LED while the sensor is streaming. Signed-off-by: Hongyang Zhao Reviewed-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/Makefile | 15 +++ .../qcs6490-thundercomm-rubikpi3-cam1-imx219.dtso | 117 +++++++++++++++++= ++++ .../qcs6490-thundercomm-rubikpi3-cam2-imx219.dtso | 117 +++++++++++++++++= ++++ 3 files changed, 249 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/M= akefile index e05414290d8e..89c1d12ed299 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -185,6 +185,21 @@ dtb-$(CONFIG_ARCH_QCOM) +=3D qcs6490-rb3gen2-industria= l-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D qcs6490-rb3gen2-vision-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D qcs6490-thundercomm-minipc-g1iot.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D qcs6490-thundercomm-rubikpi3.dtb + +qcs6490-thundercomm-rubikpi3-cam1-imx219-dtbs :=3D \ + qcs6490-thundercomm-rubikpi3.dtb \ + qcs6490-thundercomm-rubikpi3-cam1-imx219.dtbo +qcs6490-thundercomm-rubikpi3-cam2-imx219-dtbs :=3D \ + qcs6490-thundercomm-rubikpi3.dtb \ + qcs6490-thundercomm-rubikpi3-cam2-imx219.dtbo +qcs6490-thundercomm-rubikpi3-dual-imx219-dtbs :=3D \ + qcs6490-thundercomm-rubikpi3.dtb \ + qcs6490-thundercomm-rubikpi3-cam1-imx219.dtbo \ + qcs6490-thundercomm-rubikpi3-cam2-imx219.dtbo + +dtb-$(CONFIG_ARCH_QCOM) +=3D qcs6490-thundercomm-rubikpi3-cam1-imx219.dtb +dtb-$(CONFIG_ARCH_QCOM) +=3D qcs6490-thundercomm-rubikpi3-cam2-imx219.dtb +dtb-$(CONFIG_ARCH_QCOM) +=3D qcs6490-thundercomm-rubikpi3-dual-imx219.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D qcs6490-vicharak-axon-mini.dtb dtb-$(CONFIG_ARCH_QCOM) +=3D qcs8300-ride.dtb =20 diff --git a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3-cam1-imx= 219.dtso b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3-cam1-imx21= 9.dtso new file mode 100644 index 000000000000..620b4b3463b4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3-cam1-imx219.dtso @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2026, Thundercomm All rights reserved. + */ + +/dts-v1/; +/plugin/; + +#include +#include + +&{/} { + cam1_imx219_clk: clock-camera1-24m { + compatible =3D "fixed-clock"; + #clock-cells =3D <0>; + clock-frequency =3D <24000000>; + }; + + leds-camera1 { + compatible =3D "gpio-leds"; + + pinctrl-0 =3D <&cam1_privacy_led_state>; + pinctrl-names =3D "default"; + + cam1_privacy_led: led-camera1 { + function =3D LED_FUNCTION_INDICATOR; + function-enumerator =3D <1>; + gpios =3D <&tlmm 18 GPIO_ACTIVE_HIGH>; + default-state =3D "off"; + }; + }; + + /* The module enables its three sensor rails together through PWR_EN. */ + vreg_cam1_pwr: regulator-camera1-pwr { + compatible =3D "regulator-fixed"; + + regulator-name =3D "vreg_camera1_pwr"; + regulator-min-microvolt =3D <3300000>; + regulator-max-microvolt =3D <3300000>; + + gpio =3D <&tlmm 57 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&cam1_pwr_en>; + pinctrl-names =3D "default"; + + vin-supply =3D <&vreg_vcc3v3_output>; + }; +}; + +&camss { + vdda-phy-supply =3D <&vreg_l10c_0p88>; + vdda-pll-supply =3D <&vreg_l6b_1p2>; + + status =3D "okay"; + + ports { + #address-cells =3D <1>; + #size-cells =3D <0>; + + port@1 { + reg =3D <1>; + + csiphy1_ep: endpoint { + data-lanes =3D <0 1>; + remote-endpoint =3D <&cam1_imx219_ep>; + }; + }; + }; +}; + +&cci1 { + status =3D "okay"; +}; + +&cci1_i2c0 { + #address-cells =3D <1>; + #size-cells =3D <0>; + + camera@10 { + compatible =3D "sony,imx219"; + reg =3D <0x10>; + + clocks =3D <&cam1_imx219_clk>; + + VANA-supply =3D <&vreg_cam1_pwr>; + VDIG-supply =3D <&vreg_cam1_pwr>; + VDDL-supply =3D <&vreg_cam1_pwr>; + + leds =3D <&cam1_privacy_led>; + led-names =3D "privacy"; + + port { + cam1_imx219_ep: endpoint { + data-lanes =3D <1 2>; + link-frequencies =3D /bits/ 64 <456000000>; + remote-endpoint =3D <&csiphy1_ep>; + }; + }; + }; +}; + +&tlmm { + cam1_privacy_led_state: cam1-privacy-led-state { + pins =3D "gpio18"; + function =3D "gpio"; + drive-strength =3D <8>; + bias-disable; + }; + + cam1_pwr_en: cam1-pwr-en-state { + pins =3D "gpio57"; + function =3D "gpio"; + drive-strength =3D <8>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3-cam2-imx= 219.dtso b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3-cam2-imx21= 9.dtso new file mode 100644 index 000000000000..80479fffcdcb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3-cam2-imx219.dtso @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2026, Thundercomm All rights reserved. + */ + +/dts-v1/; +/plugin/; + +#include +#include + +&{/} { + cam2_imx219_clk: clock-camera2-24m { + compatible =3D "fixed-clock"; + #clock-cells =3D <0>; + clock-frequency =3D <24000000>; + }; + + leds-camera2 { + compatible =3D "gpio-leds"; + + pinctrl-0 =3D <&cam2_privacy_led_state>; + pinctrl-names =3D "default"; + + cam2_privacy_led: led-camera2 { + function =3D LED_FUNCTION_INDICATOR; + function-enumerator =3D <2>; + gpios =3D <&tlmm 19 GPIO_ACTIVE_HIGH>; + default-state =3D "off"; + }; + }; + + /* The module enables its three sensor rails together through PWR_EN. */ + vreg_cam2_pwr: regulator-camera2-pwr { + compatible =3D "regulator-fixed"; + + regulator-name =3D "vreg_camera2_pwr"; + regulator-min-microvolt =3D <3300000>; + regulator-max-microvolt =3D <3300000>; + + gpio =3D <&tlmm 58 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 =3D <&cam2_pwr_en>; + pinctrl-names =3D "default"; + + vin-supply =3D <&vreg_vcc3v3_output>; + }; +}; + +&camss { + vdda-phy-supply =3D <&vreg_l10c_0p88>; + vdda-pll-supply =3D <&vreg_l6b_1p2>; + + status =3D "okay"; + + ports { + #address-cells =3D <1>; + #size-cells =3D <0>; + + port@4 { + reg =3D <4>; + + csiphy4_ep: endpoint { + data-lanes =3D <0 1>; + remote-endpoint =3D <&cam2_imx219_ep>; + }; + }; + }; +}; + +&cci0 { + status =3D "okay"; +}; + +&cci0_i2c0 { + #address-cells =3D <1>; + #size-cells =3D <0>; + + camera@10 { + compatible =3D "sony,imx219"; + reg =3D <0x10>; + + clocks =3D <&cam2_imx219_clk>; + + VANA-supply =3D <&vreg_cam2_pwr>; + VDIG-supply =3D <&vreg_cam2_pwr>; + VDDL-supply =3D <&vreg_cam2_pwr>; + + leds =3D <&cam2_privacy_led>; + led-names =3D "privacy"; + + port { + cam2_imx219_ep: endpoint { + data-lanes =3D <1 2>; + link-frequencies =3D /bits/ 64 <456000000>; + remote-endpoint =3D <&csiphy4_ep>; + }; + }; + }; +}; + +&tlmm { + cam2_privacy_led_state: cam2-privacy-led-state { + pins =3D "gpio19"; + function =3D "gpio"; + drive-strength =3D <8>; + bias-disable; + }; + + cam2_pwr_en: cam2-pwr-en-state { + pins =3D "gpio58"; + function =3D "gpio"; + drive-strength =3D <8>; + bias-disable; + }; +}; --=20 2.43.0