From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Hi folks,

As you can see from the title, this series attempts to introduce/enable
RPROC support for the MX95-15x15-FRDM board.

For a while now, the imx_rproc driver has been using the reserved memory
DT nodes as the carveout names, which would force DT writers to go against
the DT specification's recommendation and use non-generic names (e.g.
"vdev0vring0", "vdev0vring1", etc...). This series also tries to fix this
issue by introducing the "memory-region-names" property and using it in
the imx_rproc driver to figure out the carveout names. The driver will
still allow the old way of doing things (i.e. no "memory-region-names"
property) but a warning will now be printed since this should be
discouraged.

Laurentiu Mihalcea (5):
  dt-bindings: remoteproc: imx_rproc: document optional
    "memory-region-names"
  remoteproc: imx_rpoc: fix carveout name parsing
  arm64: dts: freescale: imx95-toradex-smarc: move CM7 node to SoC DTSI
  arm64: dts: freescale: imx95-15x15-frdm: remove common rmem regions
  arm64: dts: freescale: add DT overlay for MX95-15x15-FRDM RPMSG usage

 .../bindings/remoteproc/fsl,imx-rproc.yaml    |  8 +++
 arch/arm64/boot/dts/freescale/Makefile        |  3 +
 .../dts/freescale/imx95-15x15-frdm-rpmsg.dtso | 65 +++++++++++++++++++
 .../boot/dts/freescale/imx95-15x15-frdm.dts   | 21 ------
 .../dts/freescale/imx95-toradex-smarc.dtsi    | 14 ++--
 arch/arm64/boot/dts/freescale/imx95.dtsi      |  7 ++
 drivers/remoteproc/imx_rproc.c                |  7 +-
 drivers/remoteproc/imx_rproc.h                | 19 ++++++
 8 files changed, 113 insertions(+), 31 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx95-15x15-frdm-rpmsg.dtso

-- 
2.43.0