This patch series adds support for the Toradex Aquila i.MX95 SoM and its
currently available carrier boards: the Aquila Development Board and the
Clover carrier board.
The module consists of an NXP i.MX95 family SoC, up to 16GB LPDDR5 RAM,
up to 128GB of storage, a USB 3.2 OTG and USB 2.0 Host, a Gigabit
Ethernet PHY, a 10 Gigabit Ethernet interface, an I2C EEPROM and
Temperature Sensor, an RX8130 RTC, one Quad lane CSI interface, one Quad
lane DSI or CSI interface, one LVDS interface (one or two channels), and
some optional addons: DisplayPort (through a DSI-DP bridge), TPM 2.0,
and a WiFi/BT module.
Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kit
Link: https://www.toradex.com/products/carrier-board/clover
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
---
Changes in v2:
- Add 'acked-by' tag from Conor to the bindings patch
- Reordering iomux by node name
- Changed Francesco's tags to have the Toradex mail address
- Link to v1: https://lore.kernel.org/r/20260506-add-aquila-imx95-v1-0-69c8ee1c5413@toradex.com
---
Antoine Gouby (1):
arm64: dts: freescale: imx95-aquila: Add Clover carrier board
Franz Schnyder (1):
dt-bindings: arm: fsl: add Aquila iMX95
João Paulo Gonçalves (1):
arm64: dts: freescale: add Aquila iMX95 support
Documentation/devicetree/bindings/arm/fsl.yaml | 8 +
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../boot/dts/freescale/imx95-aquila-clover.dts | 294 +++++
arch/arm64/boot/dts/freescale/imx95-aquila-dev.dts | 398 +++++++
arch/arm64/boot/dts/freescale/imx95-aquila.dtsi | 1160 ++++++++++++++++++++
5 files changed, 1862 insertions(+)
---
base-commit: 596d0f9f4fefffbf783ab26cfa90cf50f5dd6bb0
change-id: 20260501-add-aquila-imx95-423256af3d21
Best regards,
--
Franz Schnyder <franz.schnyder@toradex.com>