From nobody Wed Apr 1 11:15:00 2026 Received: from mail-wm1-f51.google.com (mail-wm1-f51.google.com [209.85.128.51]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id BD130425CCB for ; Tue, 31 Mar 2026 15:44:18 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.51 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1774971861; cv=none; b=C0KnI9x5uOEAZAlA2R1VL2mUpi/wApf0/RGsiJncAELJKxn81ubjyo8+zLxAwXj4B4u84zZmqc1QaBJeBQU3KFQY7XJvje9nCWnoU/VHU0gDrXfb78Z1yecHbpUh9ZR5+z1cF0cLwGjFqK5bH72APmVeOIhkeZiHxr6iLSjyPHA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1774971861; c=relaxed/simple; bh=VW4PGKQbMprs05QZjLUFAcp7NQ6qIj6tfIjDvxiwqeE=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=WVrbvzqEwdYkZdOTgWj4U5jlsr6c6fMIZWnKZtA6fGtZ+ygo6AxOQMyAiUtAOQIdJa0xM0DnphDQic4CTAItuPs1rrpr3ItcZGDvPjAtQlPNy4WUCktdpuLBxwH9lxgJDRKwwMoIxB1eW1ygo2rF0aWFvRORrGYQ0fYd/qF9I0M= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=flipper.net; spf=pass smtp.mailfrom=flipper.net; dkim=pass (2048-bit key) header.d=flipper.net header.i=@flipper.net header.b=VhLBB9WE; arc=none smtp.client-ip=209.85.128.51 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=flipper.net Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=flipper.net Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=flipper.net header.i=@flipper.net header.b="VhLBB9WE" Received: by mail-wm1-f51.google.com with SMTP id 5b1f17b1804b1-486fb112c09so54590585e9.1 for ; Tue, 31 Mar 2026 08:44:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=flipper.net; s=google; t=1774971857; x=1775576657; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=HJBOPz5cenCqobIA2pP3hpiRljJx71ZTKxf/DvRJSFg=; b=VhLBB9WEzyBni7AnFCRNCE1beaZmO0EKVkAiJFBOlLC9pH4pTuMN6VXB37sn50y8/N aZc95oF9m/mS1aKsXOsnwWc7u9MTPJX2IzAbv2cK5XVxzq92oGYaKKKVzM5hTUyGCXQJ X9aku6RUH7YROThmsaAvS6RnQpI7MJOv7ztyxvvtc5z8y2W3w4zFG+iQ8JPFa74C1gnX +GA8b0rANtjUIqdzbR4X+3ylfoS74XlaKHCfsTbXbALQ3qY3OIH6aUBT0wkwWcTG6qOV Q726Xjqh07RnGIqSB061JfyvfYLiTJeUPKTM4J5gLstcyo11QIxw0ZUXxqzvvlcpIs7q 0+Jg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1774971857; x=1775576657; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-gg:x-gm-message-state:from:to :cc:subject:date:message-id:reply-to; bh=HJBOPz5cenCqobIA2pP3hpiRljJx71ZTKxf/DvRJSFg=; b=TIMP6bpZLgTj4QWDnIlG+JbXVHCRo2or0XiG9zjcE8apCd4mjahWX97cid2Gb+bMZv P+DH+4Kot0vSmfTVuegFSl1+BVVZ8PNEOPDxsVID7kqpXR2Jde2OQyJwIyt+lnHdk/xy ngtM3Nkr+HrXwb5fi8fl+mvVHyJfbakfAQiXRiFJJmgTSDEk+qfWYJTKF3GXNlosveIO L7n1Z2sPf080WYS0mqLSPV/F8Fj8ZlNJ2vMfKAlSGG1rRyNeQkfvePnA5TdqdEfZ1PVw 2V8FaB1DNXkUvh0yr1byflbZvpVZP3MQij931TTrozJV/HECm/haaUllJ8siaEy8yXm2 7lSA== X-Forwarded-Encrypted: i=1; AJvYcCVCvW3LK6i4Gjq992btGwTK4nlHMMdZnK3jHKCLDufTuC3NvBpzjGWCo/J6Z7egpduOWEjVDkPb1o5t78M=@vger.kernel.org X-Gm-Message-State: AOJu0Ywz1TqUQkjJ+Ndr73vxEEp2lR9OR8pmdGw/ZpS41547THdFfEbw TmZvAwdnMInyNC+/V5wqKDYBbxDW5n84acbvLB9WPAmCqkQ+L3v13W+LtWxXx5IR8CE= X-Gm-Gg: ATEYQzz7A/3jBExDKB8Vl5vjKSA30a7T8Y4WkXdmI4VkFaBCA4kIOroOCWrTdfLnvBI jyBPT8apEbCsEi1NGzgcKe44GoFf7uY+aJuNLMrVJOTHfnbsKvBnAqgBowQ4lMa6WNR9NfNMJcq vRCngaIEBL8ju6QjiHQfEVvq+yCV3H7CmsHmuqNS+9yUsUmt5nWaazX8i9kaXtiwzeqK47EJrbj Nx3B24ke4sBFnmYYx/STIiIwJCHsJYGxMZ1bwVU+7RawiuJqXGX9EHAPYPpS5+2Mk51YISbknS/ RYc0DBEGgnISAtfB7GV0FT2lPgoV4BD8getJ3tRZj6JsxTBWss6Z79oDurLZV4zH4uddb/62ttS xtu1MlunVoz8+wqAM2x2MfZ9rSKhROd4vi3YP6NnxqVeHmCTnTorbPa5VXwEES98VEtC8GOKQ33 vzGjvvfhxE4WJd8/IOmZ09sDEqRNtqQNb8UnVeiB7uhm84wBE1t/mZHgtDJ0Qsu+lc1Bjy9G2jk dcTnA== X-Received: by 2002:a05:600c:8215:b0:485:3baa:af14 with SMTP id 5b1f17b1804b1-48727f5f985mr265707625e9.18.1774971856859; Tue, 31 Mar 2026 08:44:16 -0700 (PDT) Received: from alchark-surface.localdomain (bba-86-98-192-109.alshamil.net.ae. [86.98.192.109]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-4887c8852a5sm48412605e9.9.2026.03.31.08.44.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 31 Mar 2026 08:44:16 -0700 (PDT) From: Alexey Charkov Date: Tue, 31 Mar 2026 19:43:48 +0400 Subject: [PATCH v6 11/11] power: supply: bq257xx: Add support for BQ25792 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20260331-bq25792-v6-11-0278fba33eb9@flipper.net> References: <20260331-bq25792-v6-0-0278fba33eb9@flipper.net> In-Reply-To: <20260331-bq25792-v6-0-0278fba33eb9@flipper.net> To: Lee Jones , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Chris Morgan , Liam Girdwood , Mark Brown , Sebastian Reichel Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sebastian Reichel , linux-pm@vger.kernel.org, Alexey Charkov X-Mailer: b4 0.14.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=20378; i=alchark@flipper.net; h=from:subject:message-id; bh=VW4PGKQbMprs05QZjLUFAcp7NQ6qIj6tfIjDvxiwqeE=; b=owGbwMvMwCW2adGNfoHIK0sZT6slMWSefr3hAc9He6P7a7vSu7vT+NW+CFpLu9tGvPWVUfp0b D33nL4NHRNZGMS4GCzFFFnmfltiO9WIb9YuD4+vMHNYmUCGSIs0MAABCwNfbmJeqZGOkZ6ptqGe oaGOsY4RAxenAEy16AOGfxaM6fNbfC8paKjnLDZPq268a8oRcN/22HrVhYuca3n97BgZroslMZQ G1U6YXFZ7pyjPrsr7xZtXU7teRnjyXDw1JVuBHQA= X-Developer-Key: i=alchark@flipper.net; a=openpgp; fpr=9DF6A43D95320E9ABA4848F5B2A2D88F1059D4A5 Add support for TI BQ25792 integrated battery charger and buck-boost converter. It shares high-level logic of operation with the already supported BQ25703A, but has a different register map, bit definitions and some of the lower-level hardware states. Tested-by: Chris Morgan Signed-off-by: Alexey Charkov --- drivers/power/supply/bq257xx_charger.c | 482 +++++++++++++++++++++++++++++= +++- 1 file changed, 481 insertions(+), 1 deletion(-) diff --git a/drivers/power/supply/bq257xx_charger.c b/drivers/power/supply/= bq257xx_charger.c index 9c082865e745..b9a41fe6f00e 100644 --- a/drivers/power/supply/bq257xx_charger.c +++ b/drivers/power/supply/bq257xx_charger.c @@ -5,6 +5,7 @@ */ =20 #include +#include #include #include #include @@ -88,6 +89,53 @@ struct bq257xx_chg { u32 vsys_min; }; =20 +/** + * bq25792_read16() - Read a 16-bit value from device register + * @pdata: driver platform data + * @reg: register address to read from + * @val: pointer to store the register value + * + * Read a 16-bit big-endian value from the BQ25792 device via regmap + * and convert to CPU byte order. + * + * Return: Returns 0 on success or error on failure to read. + */ +static int bq25792_read16(struct bq257xx_chg *pdata, unsigned int reg, u16= *val) +{ + __be16 regval; + int ret; + + ret =3D regmap_raw_read(pdata->bq->regmap, reg, ®val, sizeof(regval)); + if (ret) + return ret; + + *val =3D be16_to_cpu(regval); + return 0; +} + +/** + * bq25792_write16() - Write a 16-bit value to device register + * @pdata: driver platform data + * @reg: register address to write to + * @val: 16-bit value to write in CPU byte order + * + * Convert the value to big-endian and write a 16-bit value to the + * BQ25792 device via regmap. + * + * Return: Returns 0 on success or error on failure to write. + */ +static int bq25792_write16(struct bq257xx_chg *pdata, unsigned int reg, u1= 6 val) +{ + __be16 regval =3D cpu_to_be16(val); + int ret; + + ret =3D regmap_raw_write(pdata->bq->regmap, reg, ®val, sizeof(regval)); + if (ret) + return ret; + + return 0; +} + /** * bq25703_get_state() - Get the current state of the device * @pdata: driver platform data @@ -119,6 +167,43 @@ static int bq25703_get_state(struct bq257xx_chg *pdata) return 0; } =20 +/** + * bq25792_get_state() - Get the current state of the device + * @pdata: driver platform data + * + * Get the current state of the BQ25792 charger by reading status + * registers. Updates the online, charging, overvoltage, and fault + * status fields in the driver data structure. + * + * Return: Returns 0 on success or error on failure to read device. + */ +static int bq25792_get_state(struct bq257xx_chg *pdata) +{ + unsigned int reg; + int ret; + + ret =3D regmap_read(pdata->bq->regmap, BQ25792_REG1B_CHARGER_STATUS_0, &r= eg); + if (ret) + return ret; + + pdata->online =3D reg & BQ25792_REG1B_PG_STAT; + + ret =3D regmap_read(pdata->bq->regmap, BQ25792_REG1C_CHARGER_STATUS_1, &r= eg); + if (ret) + return ret; + + pdata->charging =3D reg & BQ25792_REG1C_CHG_STAT_MASK; + + ret =3D regmap_read(pdata->bq->regmap, BQ25792_REG20_FAULT_STATUS_0, ®= ); + if (ret) + return ret; + + pdata->overvoltage =3D reg & BQ25792_REG20_OVERVOLTAGE_MASK; + pdata->oc_fault =3D reg & BQ25792_REG20_OVERCURRENT_MASK; + + return 0; +} + /** * bq25703_get_min_vsys() - Get the minimum system voltage * @pdata: driver platform data @@ -142,6 +227,31 @@ static int bq25703_get_min_vsys(struct bq257xx_chg *pd= ata, int *intval) return ret; } =20 +/** + * bq25792_get_min_vsys() - Get the minimum system voltage + * @pdata: driver platform data + * @intval: pointer to store the minimum voltage value + * + * Read the current minimum system voltage setting from the device + * and return it in microvolts. + * + * Return: Returns 0 on success or error on failure to read. + */ +static int bq25792_get_min_vsys(struct bq257xx_chg *pdata, int *intval) +{ + unsigned int reg; + int ret; + + ret =3D regmap_read(pdata->bq->regmap, BQ25792_REG00_MIN_SYS_VOLTAGE, &re= g); + if (ret) + return ret; + + reg =3D FIELD_GET(BQ25792_REG00_VSYSMIN_MASK, reg); + *intval =3D (reg * BQ25792_MINVSYS_STEP_UV) + BQ25792_MINVSYS_MIN_UV; + + return ret; +} + /** * bq25703_set_min_vsys() - Set the minimum system voltage * @pdata: driver platform data @@ -166,6 +276,29 @@ static int bq25703_set_min_vsys(struct bq257xx_chg *pd= ata, int vsys) reg); } =20 +/** + * bq25792_set_min_vsys() - Set the minimum system voltage + * @pdata: driver platform data + * @vsys: voltage value to set in uV + * + * Set the minimum system voltage by clamping the requested value + * between device limits and writing to the appropriate register. + * + * Return: Returns 0 on success or error on failure to write. + */ +static int bq25792_set_min_vsys(struct bq257xx_chg *pdata, int vsys) +{ + unsigned int reg; + int vsys_min =3D pdata->vsys_min; + + vsys =3D clamp(vsys, vsys_min, BQ25792_MINVSYS_MAX_UV); + reg =3D ((vsys - BQ25792_MINVSYS_MIN_UV) / BQ25792_MINVSYS_STEP_UV); + reg =3D FIELD_PREP(BQ25792_REG00_VSYSMIN_MASK, reg); + + return regmap_write(pdata->bq->regmap, + BQ25792_REG00_MIN_SYS_VOLTAGE, reg); +} + /** * bq25703_get_cur() - Get the reported current from the battery * @pdata: driver platform data @@ -195,6 +328,30 @@ static int bq25703_get_cur(struct bq257xx_chg *pdata, = int *intval) return ret; } =20 +/** + * bq25792_get_cur() - Get the reported current from the battery + * @pdata: driver platform data + * @intval: pointer to store the battery current value + * + * Read the current ADC value from the device representing the battery + * charge or discharge current and return it in microamps. + * + * Return: Returns 0 on success or error on failure to read. + */ +static int bq25792_get_cur(struct bq257xx_chg *pdata, int *intval) +{ + u16 reg; + int ret; + + ret =3D bq25792_read16(pdata, BQ25792_REG33_IBAT_ADC, ®); + if (ret < 0) + return ret; + + *intval =3D (s16)reg * BQ25792_ADCIBAT_STEP_UA; + + return ret; +} + /** * bq25703_get_ichg_cur() - Get the maximum reported charge current * @pdata: driver platform data @@ -218,6 +375,30 @@ static int bq25703_get_ichg_cur(struct bq257xx_chg *pd= ata, int *intval) return ret; } =20 +/** + * bq25792_get_ichg_cur() - Get the maximum reported charge current + * @pdata: driver platform data + * @intval: pointer to store the maximum charge current value + * + * Read the programmed maximum charge current limit from the device. + * + * Return: Returns 0 on success or error on failure to read value. + */ +static int bq25792_get_ichg_cur(struct bq257xx_chg *pdata, int *intval) +{ + u16 reg; + int ret; + + ret =3D bq25792_read16(pdata, BQ25792_REG03_CHARGE_CURRENT_LIMIT, ®); + if (ret) + return ret; + + *intval =3D FIELD_GET(BQ25792_REG03_ICHG_MASK, reg) * + BQ25792_ICHG_STEP_UA; + + return ret; +} + /** * bq25703_set_ichg_cur() - Set the maximum charge current * @pdata: driver platform data @@ -242,6 +423,28 @@ static int bq25703_set_ichg_cur(struct bq257xx_chg *pd= ata, int ichg) reg); } =20 +/** + * bq25792_set_ichg_cur() - Set the maximum charge current + * @pdata: driver platform data + * @ichg: current value to set in uA + * + * Set the maximum charge current by clamping the requested value + * between device limits and writing to the appropriate register. + * + * Return: Returns 0 on success or error on failure to write. + */ +static int bq25792_set_ichg_cur(struct bq257xx_chg *pdata, int ichg) +{ + int ichg_max =3D pdata->ichg_max; + u16 reg; + + ichg =3D clamp(ichg, BQ25792_ICHG_MIN_UA, ichg_max); + reg =3D FIELD_PREP(BQ25792_REG03_ICHG_MASK, + (ichg / BQ25792_ICHG_STEP_UA)); + + return bq25792_write16(pdata, BQ25792_REG03_CHARGE_CURRENT_LIMIT, reg); +} + /** * bq25703_get_chrg_volt() - Get the maximum set charge voltage * @pdata: driver platform data @@ -265,6 +468,30 @@ static int bq25703_get_chrg_volt(struct bq257xx_chg *p= data, int *intval) return ret; } =20 +/** + * bq25792_get_chrg_volt() - Get the maximum set charge voltage + * @pdata: driver platform data + * @intval: pointer to store the maximum charge voltage value + * + * Read the current charge voltage limit from the device. + * + * Return: Returns 0 on success or error on failure to read value. + */ +static int bq25792_get_chrg_volt(struct bq257xx_chg *pdata, int *intval) +{ + u16 reg; + int ret; + + ret =3D bq25792_read16(pdata, BQ25792_REG01_CHARGE_VOLTAGE_LIMIT, ®); + if (ret) + return ret; + + *intval =3D FIELD_GET(BQ25792_REG01_VREG_MASK, reg) * + BQ25792_VBATREG_STEP_UV; + + return ret; +} + /** * bq25703_set_chrg_volt() - Set the maximum charge voltage * @pdata: driver platform data @@ -291,6 +518,29 @@ static int bq25703_set_chrg_volt(struct bq257xx_chg *p= data, int vbat) reg); } =20 +/** + * bq25792_set_chrg_volt() - Set the maximum charge voltage + * @pdata: driver platform data + * @vbat: voltage value to set in uV + * + * Set the maximum charge voltage by clamping the requested value + * between device limits and writing to the appropriate register. + * + * Return: Returns 0 on success or error on failure to write. + */ +static int bq25792_set_chrg_volt(struct bq257xx_chg *pdata, int vbat) +{ + int vbat_max =3D pdata->vbat_max; + u16 reg; + + vbat =3D clamp(vbat, BQ25792_VBATREG_MIN_UV, vbat_max); + + reg =3D FIELD_PREP(BQ25792_REG01_VREG_MASK, + (vbat / BQ25792_VBATREG_STEP_UV)); + + return bq25792_write16(pdata, BQ25792_REG01_CHARGE_VOLTAGE_LIMIT, reg); +} + /** * bq25703_get_iindpm() - Get the maximum set input current * @pdata: driver platform data @@ -319,6 +569,30 @@ static int bq25703_get_iindpm(struct bq257xx_chg *pdat= a, int *intval) return ret; } =20 +/** + * bq25792_get_iindpm() - Get the maximum set input current + * @pdata: driver platform data + * @intval: pointer to store the maximum input current value + * + * Read the current input current limit from the device. + * + * Return: Returns 0 on success or error on failure to read value. + */ +static int bq25792_get_iindpm(struct bq257xx_chg *pdata, int *intval) +{ + u16 reg; + int ret; + + ret =3D bq25792_read16(pdata, BQ25792_REG06_INPUT_CURRENT_LIMIT, ®); + if (ret) + return ret; + + reg =3D FIELD_GET(BQ25792_REG06_IINDPM_MASK, reg); + *intval =3D reg * BQ25792_IINDPM_STEP_UA; + + return ret; +} + /** * bq25703_set_iindpm() - Set the maximum input current * @pdata: driver platform data @@ -344,6 +618,29 @@ static int bq25703_set_iindpm(struct bq257xx_chg *pdat= a, int iindpm) FIELD_PREP(BQ25703_IINDPM_MASK, reg)); } =20 +/** + * bq25792_set_iindpm() - Set the maximum input current + * @pdata: driver platform data + * @iindpm: current value in uA + * + * Set the maximum input current by clamping the requested value + * between device limits and writing to the appropriate register. + * + * Return: Returns 0 on success or error on failure to write. + */ +static int bq25792_set_iindpm(struct bq257xx_chg *pdata, int iindpm) +{ + u16 reg; + int iindpm_max =3D pdata->iindpm_max; + + iindpm =3D clamp(iindpm, BQ25792_IINDPM_MIN_UA, iindpm_max); + + reg =3D iindpm / BQ25792_IINDPM_STEP_UA; + + return bq25792_write16(pdata, BQ25792_REG06_INPUT_CURRENT_LIMIT, + FIELD_PREP(BQ25792_REG06_IINDPM_MASK, reg)); +} + /** * bq25703_get_vbat() - Get the reported voltage from the battery * @pdata: driver platform data @@ -368,6 +665,30 @@ static int bq25703_get_vbat(struct bq257xx_chg *pdata,= int *intval) return ret; } =20 +/** + * bq25792_get_vbat() - Get the reported voltage from the battery + * @pdata: driver platform data + * @intval: pointer to store the battery voltage value + * + * Read the current ADC value representing the battery voltage + * and return it in microvolts. + * + * Return: Returns 0 on success or error on failure to read value. + */ +static int bq25792_get_vbat(struct bq257xx_chg *pdata, int *intval) +{ + u16 reg; + int ret; + + ret =3D bq25792_read16(pdata, BQ25792_REG3B_VBAT_ADC, ®); + if (ret) + return ret; + + *intval =3D reg * BQ25792_ADCVSYSVBAT_STEP_UV; + + return ret; +} + /** * bq25703_hw_init() - Set all the required registers to init the charger * @pdata: driver platform data @@ -434,6 +755,62 @@ static int bq25703_hw_init(struct bq257xx_chg *pdata) return ret; } =20 +/** + * bq25792_hw_init() - Initialize BQ25792 hardware + * @pdata: driver platform data + * + * Initialize the BQ25792 by disabling the watchdog, enabling discharge + * current sensing with 5A limit, and configuring input current regulation. + * Set the charge current, charge voltage, minimum system voltage, and + * input current limit from platform data. Enable and configure the ADC + * to measure all available channels. + * + * Return: Returns 0 on success or error code on error. + */ +static int bq25792_hw_init(struct bq257xx_chg *pdata) +{ + struct regmap *regmap =3D pdata->bq->regmap; + int ret =3D 0; + + /* Disable watchdog (TODO: make it work instead) */ + regmap_write(regmap, BQ25792_REG10_CHARGER_CONTROL_1, 0); + + /* + * Enable battery discharge current sensing, 5A discharge current + * limit, input current regulation and ship FET functions + */ + regmap_write(regmap, BQ25792_REG14_CHARGER_CONTROL_5, + BQ25792_REG14_SFET_PRESENT | + BQ25792_REG14_EN_IBAT | + BQ25792_IBAT_5A | + BQ25792_REG14_EN_IINDPM); + + ret =3D pdata->chip->bq257xx_set_ichg(pdata, pdata->ichg_max); + if (ret) + return ret; + + ret =3D pdata->chip->bq257xx_set_vbatreg(pdata, pdata->vbat_max); + if (ret) + return ret; + + ret =3D bq25792_set_min_vsys(pdata, pdata->vsys_min); + if (ret) + return ret; + + ret =3D pdata->chip->bq257xx_set_iindpm(pdata, pdata->iindpm_max); + if (ret) + return ret; + + /* Enable the ADC. */ + regmap_write(regmap, BQ25792_REG2E_ADC_CONTROL, BQ25792_REG2E_ADC_EN); + + /* Clear per-channel ADC disable bits - enable all channels */ + regmap_write(regmap, BQ25792_REG2F_ADC_FUNCTION_DISABLE_0, 0); + regmap_write(regmap, BQ25792_REG30_ADC_FUNCTION_DISABLE_1, 0); + + return ret; +} + /** * bq25703_hw_shutdown() - Set registers for shutdown * @pdata: driver platform data @@ -446,6 +823,30 @@ static void bq25703_hw_shutdown(struct bq257xx_chg *pd= ata) BQ25703_EN_LWPWR, BQ25703_EN_LWPWR); } =20 +/** + * bq25792_hw_shutdown() - Shutdown BQ25792 hardware + * @pdata: driver platform data + * + * Perform hardware shutdown for the BQ25792. Currently a no-op + * as the device does not require special shutdown configuration. + */ +static void bq25792_hw_shutdown(struct bq257xx_chg *pdata) +{ + /* Nothing to do here */ +} + +/** + * bq257xx_set_charger_property() - Set a power supply property + * @psy: power supply device + * @prop: power supply property to set + * @val: value to set for the property + * + * Handle requests to set power supply properties such as input current + * limit, constant charge voltage, and constant charge current. Routes + * the request to the chip-specific implementation. + * + * Return: Returns 0 on success or -EINVAL if property is not supported. + */ static int bq257xx_set_charger_property(struct power_supply *psy, enum power_supply_property prop, const union power_supply_propval *val) @@ -469,6 +870,19 @@ static int bq257xx_set_charger_property(struct power_s= upply *psy, return -EINVAL; } =20 +/** + * bq257xx_get_charger_property() - Get a power supply property + * @psy: power supply device + * @psp: power supply property to get + * @val: pointer to store the property value + * + * Handle requests to get power supply properties, including status, + * health, manufacturer, online state, and various voltage/current + * measurements. Reads current device state and routes chip-specific + * property requests to appropriate handlers. + * + * Return: Returns 0 on success or -EINVAL if property is not supported. + */ static int bq257xx_get_charger_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -550,6 +964,17 @@ static enum power_supply_property bq257xx_power_supply= _props[] =3D { POWER_SUPPLY_PROP_USB_TYPE, }; =20 +/** + * bq257xx_property_is_writeable() - Check if a property is writeable + * @psy: power supply device + * @prop: power supply property to check + * + * Determines which power supply properties can be written to. Only + * charge current limit, charge voltage limit, and input current + * limit are writeable. + * + * Return: Returns 1 if property is writeable, 0 otherwise. + */ static int bq257xx_property_is_writeable(struct power_supply *psy, enum power_supply_property prop) { @@ -622,6 +1047,17 @@ static void bq257xx_external_power_changed(struct pow= er_supply *psy) power_supply_changed(psy); } =20 +/** + * bq257xx_irq_handler_thread() - Handle charger interrupt + * @irq: interrupt number + * @private: pointer to driver private data + * + * Thread handler for charger interrupts. Triggers re-evaluation of + * external power status and updates power supply state in response + * to charger events. + * + * Return: Returns IRQ_HANDLED if interrupt was processed. + */ static irqreturn_t bq257xx_irq_handler_thread(int irq, void *private) { struct bq257xx_chg *pdata =3D private; @@ -662,6 +1098,22 @@ static const struct bq257xx_chip_info bq25703_chip_in= fo =3D { .bq257xx_get_min_vsys =3D &bq25703_get_min_vsys, }; =20 +static const struct bq257xx_chip_info bq25792_chip_info =3D { + .default_iindpm_uA =3D BQ25792_IINDPM_DEFAULT_UA, + .bq257xx_hw_init =3D &bq25792_hw_init, + .bq257xx_hw_shutdown =3D &bq25792_hw_shutdown, + .bq257xx_get_state =3D &bq25792_get_state, + .bq257xx_get_ichg =3D &bq25792_get_ichg_cur, + .bq257xx_set_ichg =3D &bq25792_set_ichg_cur, + .bq257xx_get_vbatreg =3D &bq25792_get_chrg_volt, + .bq257xx_set_vbatreg =3D &bq25792_set_chrg_volt, + .bq257xx_get_iindpm =3D &bq25792_get_iindpm, + .bq257xx_set_iindpm =3D &bq25792_set_iindpm, + .bq257xx_get_cur =3D &bq25792_get_cur, + .bq257xx_get_vbat =3D &bq25792_get_vbat, + .bq257xx_get_min_vsys =3D &bq25792_get_min_vsys, +}; + /** * bq257xx_parse_dt() - Parse the device tree for required properties * @pdata: driver platform data @@ -707,6 +1159,17 @@ static int bq257xx_parse_dt(struct bq257xx_chg *pdata, return 0; } =20 +/** + * bq257xx_charger_probe() - Probe routine for charger platform device + * @pdev: platform device + * + * Probe the charger device, allocate driver data structure, select the + * appropriate chip-specific function pointers, register the power supply, + * parse device tree properties for battery limits, initialize hardware, + * and set up the interrupt handler if available. + * + * Return: Returns 0 on success or error code on failure. + */ static int bq257xx_charger_probe(struct platform_device *pdev) { struct device *dev =3D &pdev->dev; @@ -722,7 +1185,17 @@ static int bq257xx_charger_probe(struct platform_devi= ce *pdev) return -ENOMEM; =20 pdata->bq =3D bq; - pdata->chip =3D &bq25703_chip_info; + + switch (bq->type) { + case BQ25703A: + pdata->chip =3D &bq25703_chip_info; + break; + case BQ25792: + pdata->chip =3D &bq25792_chip_info; + break; + default: + return dev_err_probe(dev, -EINVAL, "Unknown chip type\n"); + } =20 platform_set_drvdata(pdev, pdata); =20 @@ -760,6 +1233,13 @@ static int bq257xx_charger_probe(struct platform_devi= ce *pdev) return ret; } =20 +/** + * bq257xx_charger_shutdown() - Shutdown routine for charger platform devi= ce + * @pdev: platform device + * + * Called during system shutdown to perform charger cleanup, including + * disabling watchdog timers or other chip-specific shutdown procedures. + */ static void bq257xx_charger_shutdown(struct platform_device *pdev) { struct bq257xx_chg *pdata =3D platform_get_drvdata(pdev); --=20 2.52.0