From nobody Tue Apr 7 12:38:52 2026 Received: from mail-wm1-f41.google.com (mail-wm1-f41.google.com [209.85.128.41]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B83BA3B8BBE for ; Wed, 25 Feb 2026 13:10:11 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.41 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1772025013; cv=none; b=mrcxCu91xNqLPtNun74ZPythU5RdrLEP5jAPlqzRiCJEa8zpxQTAIVHKPCCJd3q+jqSETaRw94E150bC4+4g/5FRU++Pm1Y29v82GpcwGVWz//gNF/jfyCORcV/1fJK0X1dxa0ujJTCCJcWtWX4NZ30+2KTd/IN1J/yFbIKVyb4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1772025013; c=relaxed/simple; bh=h+RhT/TUb2hTNwaceg85xTiKLUawJD+kY3SRUR2zgGE=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=Ch26vgpbm3lW76VE31Am10CqmelsU3LDTb1Nv/eBaSEgQynYWzV8vWxQUVtO5V/2LhHGPl1YgtwfnOz4P1b8XGNIU2OL7dgfI6yfNP3qarKmkhtvfgu1NhWhuU81IvHMpIiz83g0WAVo8SHeO9yczjNDBI3tSh3O9cvdXtwGhOQ= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=OBZKSyXY; arc=none smtp.client-ip=209.85.128.41 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="OBZKSyXY" Received: by mail-wm1-f41.google.com with SMTP id 5b1f17b1804b1-4832c8f9d87so8118365e9.3 for ; Wed, 25 Feb 2026 05:10:11 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1772025010; x=1772629810; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=otVB+C7f+9aSKMpKDXFJyq56XP8S6I0RtCUMc1naDRA=; b=OBZKSyXYZkoCCvgNgJ6v9EZQJtGk4zuOFDD6Gz4o62KXBjUFG2yoDCqGSGEiMYBPSp LnlrczpZA07Trzo26DcmFSet5krClrx7WTfW7mWc6BlAIFJG4kLPWhiAb9b5M0wG4qdM 5JwQ7mjA+Z9r+1ZoxH2nKq3s6Qtke4/tPgsWhDoTY6FPmXBiBnpYCQTQvoy3ZpAML/+I yKlmUfdldM6gxehmGF4c1+N5zQf69Q+SCy6gdsFDJjKRXbZ/iyGS8bOg3CPSJv2Y4cRm tZSzXnfBFursu0gErhVFjB0XGXpgelTcn95rtz7d8NpgKdaADH8rqdzz4GZY7McEbIeX C03Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1772025010; x=1772629810; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-gg:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=otVB+C7f+9aSKMpKDXFJyq56XP8S6I0RtCUMc1naDRA=; b=hf6CRcQ+ZhuccSFZVrXekZ9fVeio74Qyw/M1qh3eKJ+Rsww5EjhNvIXEW3fnmRCx4m Q7+o8pePpdDQAxKNiTZOVY32vWnlkae4eUpZg6ie13E7JoeR4143yf9YLKLn868/sS4x E0cmxXn8MZ9fDzYyCNDvkDvBUzRVuOdZ8hiLaN4DPGQurKfb51OoLdL1VagjVueMqQ3t OLn/rPOtNHVlLwc5TExkVHKtPoALKdbzVtq1VdZM87XN4SgDLgdYCptpf57tVFNoQLpw QJeXNIG6jxJj8G8bdYr4wxjXNJtx1w14/gDAjWS53pjJzuomsEr0rc11I7hn6ArkCbGI 25DQ== X-Forwarded-Encrypted: i=1; AJvYcCVmn7brUowkPApXQerPh0w67g6KAbYD1NYkS2MTDrYjXp1kp/L+6D683kJJns2Nm/ZLymruI5elkVNouEI=@vger.kernel.org X-Gm-Message-State: AOJu0YwiNVShZrJ7n6sSJfGGxVRQ/8kYxTzSoWel5tnRDIEEf7T30nmB stVd6B+Xua3LZabYApQZCJ3+QT2dDp47hvniOr8/PnjSSgcfyYNq9wBVz1CMpq0N X-Gm-Gg: ATEYQzxxDlEihFJGV9DmJKwZV5De7oMd7zJVQy0qkoQ4vBHn4wCdjsx4jMFAbauDwrq xD3lxl62BbfEyNPd5WB6vsCOcIbNx7Or/lLLSM5UtvggKq3B8J8G1U0W3jmhSrHWotxNb4Vp1pE ZC+3ETxlOj/0ZSc9tXIKU6CGgKCZj/ISD2BuXLIrXVh5TakW2aazzqo3sVIoybpdgjrMTERH+hC e5B9TsnSvXOupoQKGOr4dE4WprmXBNLRAzsS45sKEzgnW6ZqYKZ4YO6YR4DjMIx01e8oKcVBs17 PIxo8MsjH+kS/C1yTeCaM/YukA5QpTl92olwM5fd0Xg2XPr/JwrhF7wkYEe6xqiAxbnxWVsOARW JsFqkIo/pUr4i/svDcER6biV4dV2XGTxx+FSIOcCJgecrr++hxV0m6I7ss1WRVUFDmEKnoLsG1a MLKjwyzOxAJ34UH8VgB7m3RN4Ei/14b636PldoxYhLZ/h7PqQ4eSf40u+5RNX5KdFCvaHKKDxd+ A28zJX/iblUcYL4F3TESr0vDMa40uLjablPjeTxj1k/3Onc8iTH X-Received: by 2002:a05:600c:1e8f:b0:483:79af:ca1e with SMTP id 5b1f17b1804b1-483a96382e8mr157336755e9.5.1772025009645; Wed, 25 Feb 2026 05:10:09 -0800 (PST) Received: from fedora ([149.3.87.76]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-483bd7141e4sm73708455e9.7.2026.02.25.05.10.07 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 25 Feb 2026 05:10:09 -0800 (PST) From: Giorgi Tchankvetadze To: antoniu.miclaus@analog.com, lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org Cc: dlechner@baylibre.com, nuno.sa@analog.com, andy@kernel.org, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, Giorgi Tchankvetadze Subject: [PATCH v3] iio: adc: fix typos found by codespell Date: Wed, 25 Feb 2026 17:08:59 +0400 Message-ID: <20260225130858.108421-2-giorgitchankvetadze1997@gmail.com> X-Mailer: git-send-email 2.52.0 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" Fix various spelling mistakes in comments and error messages across drivers/iio/adc/, found by running codespell. Signed-off-by: Giorgi Tchankvetadze Reviewed-by: Andy Shevchenko --- v3: - use "settings" (plural) for AD7887 CH0, as the SPI command byte configures channel select, power mode, reference, and dual mode simultaneously (Andy) - use lowercase "millivolts" per unit spelling conventions (Andy) - ran codespell against drivers/iio/adc/Kconfig, no typos found (Andy) v2: expand to fix all typos across drivers/iio/adc/ (Andy) drivers/iio/adc/ad4030.c | 2 +- drivers/iio/adc/ad4170-4.c | 6 +++--- drivers/iio/adc/ad7380.c | 2 +- drivers/iio/adc/ad7793.c | 2 +- drivers/iio/adc/ad7887.c | 2 +- drivers/iio/adc/ad7923.c | 4 ++-- drivers/iio/adc/ade9000.c | 2 +- drivers/iio/adc/at91-sama5d2_adc.c | 2 +- drivers/iio/adc/at91_adc.c | 4 ++-- drivers/iio/adc/fsl-imx25-gcq.c | 2 +- drivers/iio/adc/max1363.c | 2 +- drivers/iio/adc/mcp3564.c | 2 +- drivers/iio/adc/men_z188_adc.c | 2 +- drivers/iio/adc/nau7802.c | 2 +- drivers/iio/adc/npcm_adc.c | 2 +- drivers/iio/adc/pac1921.c | 2 +- drivers/iio/adc/palmas_gpadc.c | 2 +- drivers/iio/adc/rohm-bd79124.c | 4 ++-- drivers/iio/adc/spear_adc.c | 2 +- drivers/iio/adc/stm32-adc-core.c | 2 +- drivers/iio/adc/stm32-adc.c | 2 +- drivers/iio/adc/sun20i-gpadc-iio.c | 2 +- drivers/iio/adc/twl4030-madc.c | 2 +- drivers/iio/adc/twl6030-gpadc.c | 2 +- 24 files changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/iio/adc/ad4030.c b/drivers/iio/adc/ad4030.c index def3e1d01ceb..eebb6f5835ad 100644 --- a/drivers/iio/adc/ad4030.c +++ b/drivers/iio/adc/ad4030.c @@ -629,7 +629,7 @@ static int ad4030_conversion(struct iio_dev *indio_dev) /* Add one byte if we are using a differential + common byte mode */ bytes_to_read +=3D (st->mode =3D=3D AD4030_OUT_DATA_MD_24_DIFF_8_COM || st->mode =3D=3D AD4030_OUT_DATA_MD_16_DIFF_8_COM) ? 1 : 0; - /* Mulitiply by the number of hardware channels */ + /* Multiply by the number of hardware channels */ bytes_to_read *=3D st->chip->num_voltage_inputs; =20 for (i =3D 0; i < cnv_nb; i++) { diff --git a/drivers/iio/adc/ad4170-4.c b/drivers/iio/adc/ad4170-4.c index 82205bfae531..77af0e6b2c59 100644 --- a/drivers/iio/adc/ad4170-4.c +++ b/drivers/iio/adc/ad4170-4.c @@ -275,9 +275,9 @@ static const unsigned int ad4170_reg_size[] =3D { }; =20 enum ad4170_ref_buf { - AD4170_REF_BUF_PRE, /* Pre-charge referrence buffer */ - AD4170_REF_BUF_FULL, /* Full referrence buffering */ - AD4170_REF_BUF_BYPASS, /* Bypass referrence buffering */ + AD4170_REF_BUF_PRE, /* Pre-charge reference buffer */ + AD4170_REF_BUF_FULL, /* Full reference buffering */ + AD4170_REF_BUF_BYPASS, /* Bypass reference buffering */ }; =20 /* maps adi,positive/negative-reference-buffer property values to enum */ diff --git a/drivers/iio/adc/ad7380.c b/drivers/iio/adc/ad7380.c index ca411371816f..9f77990a03f9 100644 --- a/drivers/iio/adc/ad7380.c +++ b/drivers/iio/adc/ad7380.c @@ -1862,7 +1862,7 @@ static int ad7380_probe_spi_offload(struct iio_dev *i= ndio_dev, =20 /* * Starting with a quite low frequency, to allow oversampling x32, - * user is then reponsible to adjust the frequency for the specific case. + * user is then responsible to adjust the frequency for the specific case. */ ret =3D ad7380_set_sample_freq(st, sample_rate / 32); if (ret) diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c index ccf18ce48e34..b6d86c62f24a 100644 --- a/drivers/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -805,7 +805,7 @@ static int ad7793_probe(struct spi_device *spi) =20 vref_mv =3D ret / 1000; } else { - vref_mv =3D 1170; /* Build-in ref */ + vref_mv =3D 1170; /* Built-in ref */ } =20 st->chip_info =3D diff --git a/drivers/iio/adc/ad7887.c b/drivers/iio/adc/ad7887.c index 87ff95643794..068171d54596 100644 --- a/drivers/iio/adc/ad7887.c +++ b/drivers/iio/adc/ad7887.c @@ -104,7 +104,7 @@ static int ad7887_ring_postdisable(struct iio_dev *indi= o_dev) { struct ad7887_state *st =3D iio_priv(indio_dev); =20 - /* dummy read: restore default CH0 settin */ + /* dummy read: restore default CH0 settings */ return spi_sync(st->spi, &st->msg[AD7887_CH0]); } =20 diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c index 0369151c7db1..acc87d486aa4 100644 --- a/drivers/iio/adc/ad7923.c +++ b/drivers/iio/adc/ad7923.c @@ -30,7 +30,7 @@ #define AD7923_PM_MODE_AS (1) /* auto shutdown */ #define AD7923_PM_MODE_FS (2) /* full shutdown */ #define AD7923_PM_MODE_OPS (3) /* normal operation */ -#define AD7923_SEQUENCE_OFF (0) /* no sequence fonction */ +#define AD7923_SEQUENCE_OFF (0) /* no sequence function */ #define AD7923_SEQUENCE_PROTECT (2) /* no interrupt write cycle */ #define AD7923_SEQUENCE_ON (3) /* continuous sequence */ =20 @@ -39,7 +39,7 @@ #define AD7923_CHANNEL_WRITE(channel) ((channel) << 6) /* write channel */ #define AD7923_SEQUENCE_WRITE(sequence) ((((sequence) & 1) << 3) \ + (((sequence) & 2) << 9)) - /* write sequence fonction */ + /* write sequence function */ /* left shift for CR : bit 11 transmit in first */ #define AD7923_SHIFT_REGISTER 4 =20 diff --git a/drivers/iio/adc/ade9000.c b/drivers/iio/adc/ade9000.c index 5dcc26a08970..4b96651e6cd9 100644 --- a/drivers/iio/adc/ade9000.c +++ b/drivers/iio/adc/ade9000.c @@ -1549,7 +1549,7 @@ static int ade9000_buffer_postdisable(struct iio_dev = *indio_dev) =20 ret =3D regmap_clear_bits(st->regmap, ADE9000_REG_MASK0, interrupts); if (ret) { - dev_err(dev, "Post-disable update maks0 fail\n"); + dev_err(dev, "Post-disable update mask0 fail\n"); return ret; } =20 diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama= 5d2_adc.c index aa4ba3f5a506..69bb49434f90 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -2507,7 +2507,7 @@ static int at91_adc_suspend(struct device *dev) at91_adc_buffer_postdisable(indio_dev); =20 /* - * Do a sofware reset of the ADC before we go to suspend. + * Do a software reset of the ADC before we go to suspend. * this will ensure that all pins are free from being muxed by the ADC * and can be used by for other devices. * Otherwise, ADC will hog them and we can't go to suspend mode. diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 8942d15b3978..6e1930f7c65d 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -171,7 +171,7 @@ struct at91_adc_trigger { }; =20 /** - * struct at91_adc_reg_desc - Various informations relative to registers + * struct at91_adc_reg_desc - Various information relative to registers * @channel_base: Base offset for the channel data registers * @drdy_mask: Mask of the DRDY field in the relevant registers * (Interruptions registers mostly) @@ -231,7 +231,7 @@ struct at91_adc_state { struct iio_trigger **trig; bool use_external; u32 vref_mv; - u32 res; /* resolution used for convertions */ + u32 res; /* resolution used for conversions */ wait_queue_head_t wq_data_avail; const struct at91_adc_caps *caps; =20 diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gc= q.c index f8c220f6a7b4..e6268f7ac400 100644 --- a/drivers/iio/adc/fsl-imx25-gcq.c +++ b/drivers/iio/adc/fsl-imx25-gcq.c @@ -47,7 +47,7 @@ struct mx25_gcq_priv { * of register writes, then a wait for a completion callback, * and finally a register read, during which userspace could issue * another read request. This lock protects a read access from - * ocurring before another one has finished. + * occurring before another one has finished. */ struct mutex lock; }; diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index 9dd547e62b6c..d35f4487b2f9 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -121,7 +121,7 @@ enum max1363_modes { }; =20 /** - * struct max1363_chip_info - chip specifc information + * struct max1363_chip_info - chip specific information * @info: iio core function callbacks structure * @channels: channel specification * @num_channels: number of channels diff --git a/drivers/iio/adc/mcp3564.c b/drivers/iio/adc/mcp3564.c index fcdf13f49c48..36675563829e 100644 --- a/drivers/iio/adc/mcp3564.c +++ b/drivers/iio/adc/mcp3564.c @@ -349,7 +349,7 @@ struct mcp3564_chip_info { * struct mcp3564_state - working data for a ADC device * @chip_info: chip specific data * @spi: SPI device structure - * @vref_mv: voltage reference value in miliVolts + * @vref_mv: voltage reference value in millivolts * @lock: synchronize access to driver's state members * @dev_addr: hardware device address * @oversampling: the index inside oversampling list of the ADC diff --git a/drivers/iio/adc/men_z188_adc.c b/drivers/iio/adc/men_z188_adc.c index 90919d282e7b..5bd334ec5655 100644 --- a/drivers/iio/adc/men_z188_adc.c +++ b/drivers/iio/adc/men_z188_adc.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * MEN 16z188 Analog to Digial Converter + * MEN 16z188 Analog to Digital Converter * * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de) * Author: Johannes Thumshirn diff --git a/drivers/iio/adc/nau7802.c b/drivers/iio/adc/nau7802.c index 458544cb8ee4..1a42c7962ec9 100644 --- a/drivers/iio/adc/nau7802.c +++ b/drivers/iio/adc/nau7802.c @@ -257,7 +257,7 @@ static int nau7802_read_poll(struct iio_dev *indio_dev, /* * Because there is actually only one ADC for both channels, we have to * wait for enough conversions to happen before getting a significant - * value when changing channels and the values are far appart. + * value when changing channels and the values are far apart. */ do { ret =3D i2c_smbus_read_byte_data(st->client, NAU7802_REG_PUCTRL); diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c index c8283873cdee..ddabb9600d46 100644 --- a/drivers/iio/adc/npcm_adc.c +++ b/drivers/iio/adc/npcm_adc.c @@ -38,7 +38,7 @@ struct npcm_adc { * read access from userspace. Reading a raw value requires a sequence * of register writes, then a wait for a event and finally a register * read, during which userspace could issue another read request. - * This lock protects a read access from ocurring before another one + * This lock protects a read access from occurring before another one * has finished. */ struct mutex lock; diff --git a/drivers/iio/adc/pac1921.c b/drivers/iio/adc/pac1921.c index a0227b57f238..bce7185953ec 100644 --- a/drivers/iio/adc/pac1921.c +++ b/drivers/iio/adc/pac1921.c @@ -856,7 +856,7 @@ static ssize_t pac1921_format_scale_avail(const int (*c= onst scales_tbl)[2], /* * Read available scales for a specific channel * - * NOTE: using extended info insted of iio.read_avail() because access to + * NOTE: using extended info instead of iio.read_avail() because access to * current scales must be locked as they depend on shunt resistor which may * change runtime. Caller of iio.read_avail() would access the table unloc= ked * instead. diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c index 3f433064618e..3aea12e9d4fb 100644 --- a/drivers/iio/adc/palmas_gpadc.c +++ b/drivers/iio/adc/palmas_gpadc.c @@ -105,7 +105,7 @@ struct palmas_gpadc_thresholds { * of register writes, then a wait for a completion callback, * and finally a register read, during which userspace could issue * another read request. This lock protects a read access from - * ocurring before another one has finished. + * occurring before another one has finished. * * This is the palmas_gpadc structure to store run-time information * and pointers for this driver instance. diff --git a/drivers/iio/adc/rohm-bd79124.c b/drivers/iio/adc/rohm-bd79124.c index fc0452749b79..40d00bd0cc9d 100644 --- a/drivers/iio/adc/rohm-bd79124.c +++ b/drivers/iio/adc/rohm-bd79124.c @@ -75,7 +75,7 @@ =20 /* * The high limit, low limit and last measurement result are each stored in - * 2 consequtive registers. 4 bits are in the high bits of the first regis= ter + * 2 consecutive registers. 4 bits are in the high bits of the first regis= ter * and 8 bits in the next register. * * These macros return the address of the first reg for the given channel. @@ -962,7 +962,7 @@ static int bd79124_hw_init(struct bd79124_data *data) if (ret) return ret; =20 - /* Enable writing the measured values to the regsters */ + /* Enable writing the measured values to the registers */ ret =3D regmap_set_bits(data->map, BD79124_REG_GEN_CFG, BD79124_MSK_STATS_EN); if (ret) diff --git a/drivers/iio/adc/spear_adc.c b/drivers/iio/adc/spear_adc.c index 50b0a607baeb..91995489bb1c 100644 --- a/drivers/iio/adc/spear_adc.c +++ b/drivers/iio/adc/spear_adc.c @@ -82,7 +82,7 @@ struct spear_adc_state { * of register writes, then a wait for a completion callback, * and finally a register read, during which userspace could issue * another read request. This lock protects a read access from - * ocurring before another one has finished. + * occurring before another one has finished. */ struct mutex lock; u32 current_clk; diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-c= ore.c index e39a4c0db25e..a42d82d61cb8 100644 --- a/drivers/iio/adc/stm32-adc-core.c +++ b/drivers/iio/adc/stm32-adc-core.c @@ -227,7 +227,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *= pdev, if (priv->aclk) { /* * Asynchronous clock modes (e.g. ckmode =3D=3D 0) - * From spec: PLL output musn't exceed max rate + * From spec: PLL output mustn't exceed max rate */ rate =3D clk_get_rate(priv->aclk); if (!rate) { diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c index 2d7f88459c7c..46106200bb86 100644 --- a/drivers/iio/adc/stm32-adc.c +++ b/drivers/iio/adc/stm32-adc.c @@ -1662,7 +1662,7 @@ static irqreturn_t stm32_adc_threaded_isr(int irq, vo= id *data) /* * Clear ovr bit to avoid subsequent calls to IRQ handler. * This requires to stop ADC first. OVR bit state in ISR, - * is propaged to CSR register by hardware. + * is propagated to CSR register by hardware. */ adc->cfg->stop_conv(indio_dev); stm32_adc_irq_clear(indio_dev, regs->isr_ovr.mask); diff --git a/drivers/iio/adc/sun20i-gpadc-iio.c b/drivers/iio/adc/sun20i-gp= adc-iio.c index e4dfe76e6362..861c14da75ad 100644 --- a/drivers/iio/adc/sun20i-gpadc-iio.c +++ b/drivers/iio/adc/sun20i-gpadc-iio.c @@ -55,7 +55,7 @@ struct sun20i_gpadc_iio { * of register writes, then a wait for a completion callback, * and finally a register read, during which userspace could issue * another read request. This lock protects a read access from - * ocurring before another one has finished. + * occurring before another one has finished. */ struct mutex lock; }; diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c index fe3b31ec976e..f0274cd74973 100644 --- a/drivers/iio/adc/twl4030-madc.c +++ b/drivers/iio/adc/twl4030-madc.c @@ -252,7 +252,7 @@ static const struct s16_fract twl4030_divider_ratios[16= ] =3D { {5, 11}, /* CHANNEL 15 */ }; =20 -/* Conversion table from -3 to 55 degrees Celcius */ +/* Conversion table from -3 to 55 degrees Celsius */ static int twl4030_therm_tbl[] =3D { 30800, 29500, 28300, 27100, 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpad= c.c index 3ac774ebf678..7810d6b2b668 100644 --- a/drivers/iio/adc/twl6030-gpadc.c +++ b/drivers/iio/adc/twl6030-gpadc.c @@ -416,7 +416,7 @@ static u8 twl6032_channel_to_reg(int channel) { /* * for any prior chosen channel, when the conversion is ready - * the result is avalable in GPCH0_LSB, GPCH0_MSB. + * the result is available in GPCH0_LSB, GPCH0_MSB. */ =20 return TWL6032_GPADC_GPCH0_LSB; --=20 2.52.0