From nobody Tue Feb 10 21:59:22 2026 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C781034AAF6; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1770585947; cv=none; b=V5LmVwu3eqzN32ePld0lvPUC/QPueTVgPze9AQeIdW0PLFjwL97+5vCI8xmqe+7FKrB1D72REwMn85U9NlcABRd87Ezoe7t8afsIiu+LL+mgitR0aYMpTKZPVc9sSKIad2XQU9rOGfNnuIpsNLjcNal6bb9LG3aolxcYzg2K0Qc= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1770585947; c=relaxed/simple; bh=dZs5JcM9PR2XSuawNt8WEAmuyyB1Df430ZFoJ6jAaes=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=BJ+qmH2GA9JZaMkYUaH0hF1cNzOw0AyZgYrRtEXdd9SgB86tLRaikf85PwJ2vdsmTMYEPsPX9oYJ5NskVcZvdqe7EIDf5ZIl5w7T+znABbLlj6zXQ0bYPqqdVBeHwgP/B8jEDd3XUCSNZ8np1HQ8KWsfvGmre6YM1iat9UrLTc0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=MqclzUoo; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="MqclzUoo" Received: by smtp.kernel.org (Postfix) with ESMTPS id 6ABA9C19424; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1770585947; bh=dZs5JcM9PR2XSuawNt8WEAmuyyB1Df430ZFoJ6jAaes=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=MqclzUoo8JDBUXO/yT0D4e4p1oEYncKkcd2JBXYq0QAMLUKwEHIohXvNPTeSzh5yw /WS7Ldeau8CR2HFvIbcJbH812gzJ2UqkA6fFCZSZy9Kwz56obFxMEvCsRmgERikOhR HGgRRm8yBRz2Gzl8+EJ0qa2/ctbUuflSOwHMjts70wecKupgdpNmMTYqKZwRaCC7E5 fONW8eUiRf8150cOLVh5fjJWH/h+Gk7/NAt+qagnnpIzSMz9aHKlVf+sdTRKSGAod4 BH9TEKWnFf+J+8+sabbGUPiXjEhLlm1tWMplOm50IFRhY2eZ47BV8/U7jDWvnAMISe +I7J2rHmTVJTA== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 53A2CEF06E2; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) From: Jens Glathe via B4 Relay Date: Sun, 08 Feb 2026 22:25:38 +0100 Subject: [PATCH 1/4] dt-bindings: arm: qcom: Add ASUS Vivobook X1P42100 variant Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20260208-b4-vivobook-v1-1-3a9b5e153909@oldschoolsolutions.biz> References: <20260208-b4-vivobook-v1-0-3a9b5e153909@oldschoolsolutions.biz> In-Reply-To: <20260208-b4-vivobook-v1-0-3a9b5e153909@oldschoolsolutions.biz> To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Maud Spierings , Jens Glathe X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1770585945; l=1004; i=jens.glathe@oldschoolsolutions.biz; s=20240919; h=from:subject:message-id; bh=IBPKARxFia+6xnXTVvSKWy8Y0My2kh4kelOmQulvrgA=; b=O4QTAkI8VT1e9qSgk6yo+NuHGUmWb/iVwqJ1RTG1W4V1X3U4mHJJwFT7kvByhkCsTirTvtmeW hTlRAcNHkReDKl+Y/bDRSV/OA9nHXDMhbD0QhYNPT+BMnlfX2G0mw0C X-Developer-Key: i=jens.glathe@oldschoolsolutions.biz; a=ed25519; pk=JcRJqJc/y8LsxOlPakALD3juGfOKmFBWtO+GfELMJVg= X-Endpoint-Received: by B4 Relay for jens.glathe@oldschoolsolutions.biz/20240919 with auth_id=216 X-Original-From: Jens Glathe Reply-To: jens.glathe@oldschoolsolutions.biz From: Jens Glathe The ASUS Vivobook S15 (S5507) [1] is available with Hamoa and Purwa SoC. Add the Purwa-based variant: asus,vivobook-s15-x1p4 compatible to Purwa SoC [1]: https://www.asus.com/de/laptops/for-home/vivobook/asus-vivobook-s-15-s= 5507/techspec/ Signed-off-by: Jens Glathe --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentatio= n/devicetree/bindings/arm/qcom.yaml index d48c625d3fc42f1a90f76a020753ae4daec8c5ea..5eaeda2c85bdc189d650bba82f1= 73810854f5d1e 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1124,6 +1124,7 @@ properties: =20 - items: - enum: + - asus,vivobook-s15-x1p4 - asus,zenbook-a14-ux3407qa-lcd - asus,zenbook-a14-ux3407qa-oled - const: asus,zenbook-a14-ux3407qa --=20 2.51.0 From nobody Tue Feb 10 21:59:22 2026 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C791A34AB15; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1770585947; cv=none; b=k+JxmGqziUuBbcDDeyIj0zJTtrkBU5L4sFkfbOsEKAXYeLYngAzrj9QXpgv9bTTuVI7fl8iMhNXMfhknt9zjM+k59R94TBfZ7VhayCNwfFUw/F3MnOXtgcf2agdSQDQ+qtECUkaAd6V9JY5JiTqJI1kMSC3iN0blIvmSdCVv+Tw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1770585947; c=relaxed/simple; bh=Jv6JzNhbW3FoTxd7kM/+A8rveZuvMbwdjQ+xC58Vtb8=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=Cm4IiJbzMAUlw2M2gFHrJCu1ZfeLs6JSimunWQtQ6vsS5OPvrFVopF1s566ilA33Ny3l3QBTV2+Z2vf7WPWQVuXJgwUXd55mnDfmwFGt9NtDKQWnC6ifgtmNeeHdVPNRj/SqZwOXKZTCFMFZrafHuUm+FakBhMDiil85CRtNUdM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=FYakqXsg; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="FYakqXsg" Received: by smtp.kernel.org (Postfix) with ESMTPS id 77288C2BC9E; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1770585947; bh=Jv6JzNhbW3FoTxd7kM/+A8rveZuvMbwdjQ+xC58Vtb8=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=FYakqXsglJKh+h9ffo6UuUAyyMON7JaG/klMM9mhWy8TP73z7gX9jStmSLgoyQwsD Tzj5Lt04jzpXGbS1Lwoe7MaZsSM/eDRUxaJv16wJ6GfWGvIkwns0zSEZiJLibyHZO+ jLyTvcEmUyIkOo5ZTk3lSD+bVPxCKSL0i8DCtbnJJSDHWYKusLWEZt4VsJubeXYRBk U4xlPHld/6ZsIWxgRQm1VnuUKhhzcDlwQyNKWAIsPjv8fEzhz47xP69yvKJcH0Fmrx Gr8ao63EIOF2cTaHnsD3Pm279BoQOoYaTZJ4Twgnvrdfcgc2W/nfmJcUjqa/PIrs8G m21r9b0JqMcyw== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6FE70EF06EC; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) From: Jens Glathe via B4 Relay Date: Sun, 08 Feb 2026 22:25:39 +0100 Subject: [PATCH 2/4] firmware: qcom: scm: allow QSEECOM on ASUS Vivobook X1P42100 variant Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20260208-b4-vivobook-v1-2-3a9b5e153909@oldschoolsolutions.biz> References: <20260208-b4-vivobook-v1-0-3a9b5e153909@oldschoolsolutions.biz> In-Reply-To: <20260208-b4-vivobook-v1-0-3a9b5e153909@oldschoolsolutions.biz> To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Maud Spierings , Jens Glathe X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1770585945; l=870; i=jens.glathe@oldschoolsolutions.biz; s=20240919; h=from:subject:message-id; bh=Z+hY6KG+Sx+z/m5Jxyf1HPdCwq1ydRrs6GXjeMG5dTw=; b=184IJkcbRr7f4UUuL6BFSg4EHnggzXSG1u75RToG7ecuymij5DaDnfYUwTEA5lJ6B0QTBR8vz kRyvd3b8Fp3DSeGlawk7i8EVcOFb1oBvePJDrZCgd+Ynmk8fd+CPIjV X-Developer-Key: i=jens.glathe@oldschoolsolutions.biz; a=ed25519; pk=JcRJqJc/y8LsxOlPakALD3juGfOKmFBWtO+GfELMJVg= X-Endpoint-Received: by B4 Relay for jens.glathe@oldschoolsolutions.biz/20240919 with auth_id=216 X-Original-From: Jens Glathe Reply-To: jens.glathe@oldschoolsolutions.biz From: Jens Glathe Enables access to EFI variables on this machine. Signed-off-by: Jens Glathe Reviewed-by: Dmitry Baryshkov --- drivers/firmware/qcom/qcom_scm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_= scm.c index 8fbc96693a55f53c508d1ddb2d7a9e62281d1544..2fe1632f06e908683ba2841d68f= 9d382f407a425 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -2290,6 +2290,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); */ static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unus= ed =3D { { .compatible =3D "asus,vivobook-s15" }, + { .compatible =3D "asus,vivobook-s15-x1p4" }, { .compatible =3D "asus,zenbook-a14-ux3407qa" }, { .compatible =3D "asus,zenbook-a14-ux3407ra" }, { .compatible =3D "dell,inspiron-14-plus-7441" }, --=20 2.51.0 From nobody Tue Feb 10 21:59:22 2026 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C789834AB0B; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1770585947; cv=none; b=quRJfsHQXsM9hCI2Kh3TP2yyUEJX4k9OhxiT4l2ZDJAt1oBvH7ndTYI08pN/BqwKIyv/X1m74dSTk2ZGwMlpagD1TnE04OmAZB8hh9YDDn+MntPDbSt3Ikzw3xGyqthDkLc5dIvkcXB0W2KkN0Ou0yjeVfddhGY19zI50G/aexU= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1770585947; c=relaxed/simple; bh=7KjgaPAZ/N/94BLKtAqzmJLLuL+i8NbsZKMcDcDhN6I=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=Jh1745/HiePgqEfJNCyD9qTNwEqsZEmGM5rDPGAeskZrDZTRgioWt2GYCpIFUCeN4Bmj/DDHGKR13+W5eSTMG3EY+Jte1MLqEIQrEYEXs6ozIckMYnR4jdoZTB9eHaUwz6P7FLpao+J/nnfAv5FHDa0VtXXJR5fQbaSydqPaAyg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=Z5pxfR01; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="Z5pxfR01" Received: by smtp.kernel.org (Postfix) with ESMTPS id 8C585C116C6; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1770585947; bh=7KjgaPAZ/N/94BLKtAqzmJLLuL+i8NbsZKMcDcDhN6I=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=Z5pxfR01zASSWE03rA6f+tdcGGwdU6VVCe/+syq7ZQihgpefVW7PHybwa8WJ59Q3L /Q+7zl6VU6EMO2Ev/RfNfFq1qxyIQ4WihU3mR8J9MyC0lnTMJgdTG5R/w9yDLQBwF4 S8PEdhVA6vjzD/AR/OOt7PgWplMjJg3M1kYhImMXh74mxTNFXSrLPhK+x53rbbwCBA vHt5trA2drgNSsLar2FXjd9bKJi/qR40OwSsxyASlxvCsm8d49ZC74qznX+c+Q2YHG 5wC/qdSpewiWmKgs9hmnp/nLmtPQ10OyFann59Ik6UgRm0sqR2AapC/qrtxLKTgo9Q Mh8DV3bvwIELg== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 811F0EF06EE; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) From: Jens Glathe via B4 Relay Date: Sun, 08 Feb 2026 22:25:40 +0100 Subject: [PATCH 3/4] arm64: dts: qcom: x1-vivobook-s15: create a common dtsi for Hamoa and Purwa variants Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20260208-b4-vivobook-v1-3-3a9b5e153909@oldschoolsolutions.biz> References: <20260208-b4-vivobook-v1-0-3a9b5e153909@oldschoolsolutions.biz> In-Reply-To: <20260208-b4-vivobook-v1-0-3a9b5e153909@oldschoolsolutions.biz> To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Maud Spierings , Jens Glathe X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1770585945; l=2235; i=jens.glathe@oldschoolsolutions.biz; s=20240919; h=from:subject:message-id; bh=Y2qI1/Z1yfQDT1AVJoKJZZpFnOZ4lrVs42vPBsxZ9/I=; b=apTc6Gg3RSrTxFsFUqVHgpwtchAffdCNlUGQ8tDMPm1K8/J4XhXlZRXlTVCJ08bL9iudkZ4GH L4mim6Yp2GYCHcRL1qtSIuRvm4R2jJy1hiLsAUclbwVLZOmm28Og5xc X-Developer-Key: i=jens.glathe@oldschoolsolutions.biz; a=ed25519; pk=JcRJqJc/y8LsxOlPakALD3juGfOKmFBWtO+GfELMJVg= X-Endpoint-Received: by B4 Relay for jens.glathe@oldschoolsolutions.biz/20240919 with auth_id=216 X-Original-From: Jens Glathe Reply-To: jens.glathe@oldschoolsolutions.biz From: Jens Glathe The Asus VivoBook S15 S5507QA is sold with x1e-78-100 and x1p-42-100 SKUs. Put the common part into one dtsi file to be included for model-specific dt= s. Signed-off-by: Jens Glathe --- ...-vivobook-s15.dts =3D> x1-asus-vivobook-s15.dtsi} | 28 ----------------= ------ 1 file changed, 28 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch= /arm64/boot/dts/qcom/x1-asus-vivobook-s15.dtsi similarity index 97% copy from arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts copy to arch/arm64/boot/dts/qcom/x1-asus-vivobook-s15.dtsi index 17269eb0638acb81cef7112285372b5d306ed8c3..1ac64d64e675b557d86042c3c36= 1239170cf3f97 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ b/arch/arm64/boot/dts/qcom/x1-asus-vivobook-s15.dtsi @@ -4,19 +4,14 @@ * Copyright (c) 2024, Xilin Wu */ =20 -/dts-v1/; - #include #include #include #include =20 -#include "hamoa.dtsi" #include "hamoa-pmics.dtsi" =20 / { - model =3D "ASUS Vivobook S 15"; - compatible =3D "asus,vivobook-s15", "qcom,x1e80100"; chassis-type =3D "laptop"; =20 aliases { @@ -632,10 +627,6 @@ &gpu { status =3D "okay"; }; =20 -&gpu_zap_shader { - firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn"; -}; - &i2c0 { clock-frequency =3D <400000>; status =3D "okay"; @@ -833,11 +824,6 @@ retimer_ss1_con_sbu_out: endpoint { }; }; =20 -&iris { - firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qcvss8380.mbn"; - status =3D "okay"; -}; - &mdss { status =3D "okay"; }; @@ -1027,20 +1013,6 @@ &qupv3_2 { status =3D "okay"; }; =20 -&remoteproc_adsp { - firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn", - "qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf"; - - status =3D "okay"; -}; - -&remoteproc_cdsp { - firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn", - "qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf"; - - status =3D "okay"; -}; - &smb2360_0 { status =3D "okay"; }; --=20 2.51.0 From nobody Tue Feb 10 21:59:22 2026 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C2EED34A799; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1770585947; cv=none; b=WPDBg5kIIiTV3jwEhiVqA21sSiRCVYikOapIGrIPmPTE+OkKffzgllz7h00Ry8CmyuNe0wc3WCx1OG2KDAiYHEtHN4Re1NAykahPLzCCRkU1BxBTfNHW6r7Bu+bXJTvEcQwV2uGxkeT9qzh0qx8UQKHQDPu2vAM11+jHongQQ3E= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1770585947; c=relaxed/simple; bh=H1BQ4H3yJh8Bb4ZJctWhcNzvFm6ImOvMAXKQSyqu16U=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=bIMsuAdPmJ0Al5x4yI2+nPAbK8tkXfRsuSsbEO6UdodRDkF55ysdK8YHZ5YoZnza1YAGvlpoDDRPFbZXK3VV5vA+GS9j7F6F4XuUB1+/PGvX7tNJn+mRFS1H4xHYTXdrFMqXHwM2I8UlhKoN5xjD40USZOOlyeZUKDSHVlhctQ0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=JpdVKc3O; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="JpdVKc3O" Received: by smtp.kernel.org (Postfix) with ESMTPS id 9CD4FC2BC86; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1770585947; bh=H1BQ4H3yJh8Bb4ZJctWhcNzvFm6ImOvMAXKQSyqu16U=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=JpdVKc3OuY5gw5KD+D1lJybjetOMJGkP9MBEoqMZBDUbmntjeqA/tu31EWaxX46wL Do4LBtvlE8iZta6tsTJ2KFH71N7pxA2/Rk9K/fsg67w8e98kKZOPR3ynBi5mssBN6b bXz6PEEUVapV09LY4BrOOLZyEerHVxYhpYmQe8Lht5DZm2JzvEjibxu5EFs1TK84+9 yVj62H1aDUAraxyiHGh/qHWoKvZoHVvtIRrlTx0LlYkUpy+WnYNs9YuO+cd7uCiBW9 A0zGRgIQUjDa9EG2ncD/+kSVhvgs0ibzMB7ne+bgFxifxeNbNfeBi5f/YjGS+xdrht gM013JYmFFoWg== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9580FEF06F2; Sun, 8 Feb 2026 21:25:47 +0000 (UTC) From: Jens Glathe via B4 Relay Date: Sun, 08 Feb 2026 22:25:41 +0100 Subject: [PATCH 4/4] arm64: dts: qcom: x1-vivobook-s15: add Hamoa- and Purwa-compatible device trees Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <20260208-b4-vivobook-v1-4-3a9b5e153909@oldschoolsolutions.biz> References: <20260208-b4-vivobook-v1-0-3a9b5e153909@oldschoolsolutions.biz> In-Reply-To: <20260208-b4-vivobook-v1-0-3a9b5e153909@oldschoolsolutions.biz> To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Maud Spierings , Jens Glathe X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1770585945; l=34417; i=jens.glathe@oldschoolsolutions.biz; s=20240919; h=from:subject:message-id; bh=9C7feBACK+YYsXk95ykY3IK2KG5gyVUhRTb3ATBSW8A=; b=FQoKaM0EELjz7MWdyxABeb/NDwQ7abk/lHddnOOm0Hvg2gzTMu18xu+l2UpHFAfYfxOnRrvZ9 jFFrYuuBF9jCMLBTqmyHzNohOvguFzdHYAaVApycrVi3XfHakr1kYBI X-Developer-Key: i=jens.glathe@oldschoolsolutions.biz; a=ed25519; pk=JcRJqJc/y8LsxOlPakALD3juGfOKmFBWtO+GfELMJVg= X-Endpoint-Received: by B4 Relay for jens.glathe@oldschoolsolutions.biz/20240919 with auth_id=216 X-Original-From: Jens Glathe Reply-To: jens.glathe@oldschoolsolutions.biz From: Jens Glathe The ASUS Vivobook S15 (S5507) [1] is available with Hamoa and Purwa SoC. Add the Purwa-based device tree, and change the Hamoa-based device tree to = include x1-asus-vivobook-s15.dtsi. [1]: https://www.asus.com/de/laptops/for-home/vivobook/asus-vivobook-s-15-s= 5507/techspec/ Signed-off-by: Jens Glathe --- arch/arm64/boot/dts/qcom/Makefile | 2 + .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 1425 +---------------= ---- .../boot/dts/qcom/x1p42100-asus-vivobook-s15.dts | 47 + 3 files changed, 89 insertions(+), 1385 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/M= akefile index f80b5d9cf1e80e4efcd70f14cef4e7d4a1ec48eb..baa7ec904b4878a41e6fd9c6780= 25f28cb484cf3 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -380,6 +380,8 @@ x1e80100-microsoft-romulus15-el2-dtbs :=3D x1e80100-mic= rosoft-romulus15.dtb x1-el2 dtb-$(CONFIG_ARCH_QCOM) +=3D x1e80100-microsoft-romulus15.dtb x1e80100-mic= rosoft-romulus15-el2.dtb x1e80100-qcp-el2-dtbs :=3D x1e80100-qcp.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) +=3D x1e80100-qcp.dtb x1e80100-qcp-el2.dtb +x1p42100-asus-vivobook-s15-el2-dtbs :=3D x1p42100-asus-vivobook-s15.dtb x1= -el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) +=3D x1p42100-asus-vivobook-s15.dtb x1p42100-asus-= vivobook-s15-el2.dtb x1p42100-asus-zenbook-a14-el2-dtbs :=3D x1p42100-asus-zenbook-a14.dtb x1-e= l2.dtbo dtb-$(CONFIG_ARCH_QCOM) +=3D x1p42100-asus-zenbook-a14.dtb x1p42100-asus-z= enbook-a14-el2.dtb x1p42100-asus-zenbook-a14-lcd-el2-dtbs :=3D x1p42100-asus-zenbook-a14-lcd.= dtb x1-el2.dtbo diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch= /arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts dissimilarity index 96% index 17269eb0638acb81cef7112285372b5d306ed8c3..ed6ca0be367cfec22b9fe21a1a3= a93be65ed195a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -1,1385 +1,40 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. - * Copyright (c) 2024, Xilin Wu - */ - -/dts-v1/; - -#include -#include -#include -#include - -#include "hamoa.dtsi" -#include "hamoa-pmics.dtsi" - -/ { - model =3D "ASUS Vivobook S 15"; - compatible =3D "asus,vivobook-s15", "qcom,x1e80100"; - chassis-type =3D "laptop"; - - aliases { - serial1 =3D &uart14; - }; - - gpio-keys { - compatible =3D "gpio-keys"; - pinctrl-0 =3D <&hall_int_n_default>; - pinctrl-names =3D "default"; - - switch-lid { - gpios =3D <&tlmm 92 GPIO_ACTIVE_LOW>; - linux,input-type =3D ; - linux,code =3D ; - wakeup-source; - wakeup-event-action =3D ; - }; - }; - - hdmi-bridge { - compatible =3D "parade,ps185hdm"; - - pinctrl-0 =3D <&hdmi_hpd_default>; - pinctrl-names =3D "default"; - - ports { - #address-cells =3D <1>; - #size-cells =3D <0>; - - port@0 { - reg =3D <0>; - - hdmi_bridge_dp_in: endpoint { - remote-endpoint =3D <&usb_1_ss2_qmpphy_out_dp>; - }; - }; - - port@1 { - reg =3D <1>; - - hdmi_bridge_tmds_out: endpoint { - remote-endpoint =3D <&hdmi_con>; - }; - }; - }; - }; - - hdmi-connector { - compatible =3D "hdmi-connector"; - type =3D "a"; - - port { - hdmi_con: endpoint { - remote-endpoint =3D <&hdmi_bridge_tmds_out>; - }; - }; - }; - - pmic-glink { - compatible =3D "qcom,x1e80100-pmic-glink", - "qcom,sm8550-pmic-glink", - "qcom,pmic-glink"; - orientation-gpios =3D <&tlmm 121 GPIO_ACTIVE_HIGH>, - <&tlmm 123 GPIO_ACTIVE_HIGH>; - #address-cells =3D <1>; - #size-cells =3D <0>; - - /* Left-side port, closer to the screen */ - connector@0 { - compatible =3D "usb-c-connector"; - reg =3D <0>; - power-role =3D "dual"; - data-role =3D "dual"; - - ports { - #address-cells =3D <1>; - #size-cells =3D <0>; - - port@0 { - reg =3D <0>; - - pmic_glink_ss0_hs_in: endpoint { - remote-endpoint =3D <&usb_1_ss0_dwc3_hs>; - }; - }; - - port@1 { - reg =3D <1>; - - pmic_glink_ss0_ss_in: endpoint { - remote-endpoint =3D <&retimer_ss0_ss_out>; - }; - }; - - port@2 { - reg =3D <2>; - - pmic_glink_ss0_con_sbu_in: endpoint { - remote-endpoint =3D <&retimer_ss0_con_sbu_out>; - }; - }; - }; - }; - - /* Left-side port, farther from the screen */ - connector@1 { - compatible =3D "usb-c-connector"; - reg =3D <1>; - power-role =3D "dual"; - data-role =3D "dual"; - - ports { - #address-cells =3D <1>; - #size-cells =3D <0>; - - port@0 { - reg =3D <0>; - - pmic_glink_ss1_hs_in: endpoint { - remote-endpoint =3D <&usb_1_ss1_dwc3_hs>; - }; - }; - - port@1 { - reg =3D <1>; - - pmic_glink_ss1_ss_in: endpoint { - remote-endpoint =3D <&retimer_ss1_ss_out>; - }; - }; - - port@2 { - reg =3D <2>; - - pmic_glink_ss1_con_sbu_in: endpoint { - remote-endpoint =3D <&retimer_ss1_con_sbu_out>; - }; - }; - }; - }; - }; - - reserved-memory { - linux,cma { - compatible =3D "shared-dma-pool"; - size =3D <0x0 0x8000000>; - reusable; - linux,cma-default; - }; - }; - - vreg_edp_3p3: regulator-edp-3p3 { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_EDP_3P3"; - regulator-min-microvolt =3D <3300000>; - regulator-max-microvolt =3D <3300000>; - - gpio =3D <&tlmm 70 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 =3D <&edp_reg_en>; - pinctrl-names =3D "default"; - - regulator-always-on; - regulator-boot-on; - }; - - vreg_nvme: regulator-nvme { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_NVME_3P3"; - regulator-min-microvolt =3D <3300000>; - regulator-max-microvolt =3D <3300000>; - - gpio =3D <&tlmm 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 =3D <&nvme_reg_en>; - pinctrl-names =3D "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_1p15: regulator-rtmr0-1p15 { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_RTMR0_1P15"; - regulator-min-microvolt =3D <1150000>; - regulator-max-microvolt =3D <1150000>; - - gpio =3D <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 =3D <&usb0_pwr_1p15_reg_en>; - pinctrl-names =3D "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_1p8: regulator-rtmr0-1p8 { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_RTMR0_1P8"; - regulator-min-microvolt =3D <1800000>; - regulator-max-microvolt =3D <1800000>; - - gpio =3D <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 =3D <&usb0_1p8_reg_en>; - pinctrl-names =3D "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_3p3: regulator-rtmr0-3p3 { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_RTMR0_3P3"; - regulator-min-microvolt =3D <3300000>; - regulator-max-microvolt =3D <3300000>; - - gpio =3D <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 =3D <&usb0_3p3_reg_en>; - pinctrl-names =3D "default"; - - regulator-boot-on; - }; - - vreg_rtmr1_1p15: regulator-rtmr1-1p15 { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_RTMR1_1P15"; - regulator-min-microvolt =3D <1150000>; - regulator-max-microvolt =3D <1150000>; - - gpio =3D <&tlmm 188 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 =3D <&usb1_pwr_1p15_reg_en>; - pinctrl-names =3D "default"; - - regulator-boot-on; - }; - - vreg_rtmr1_1p8: regulator-rtmr1-1p8 { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_RTMR1_1P8"; - regulator-min-microvolt =3D <1800000>; - regulator-max-microvolt =3D <1800000>; - - gpio =3D <&tlmm 175 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 =3D <&usb1_pwr_1p8_reg_en>; - pinctrl-names =3D "default"; - - regulator-boot-on; - }; - - vreg_rtmr1_3p3: regulator-rtmr1-3p3 { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_RTMR1_3P3"; - regulator-min-microvolt =3D <3300000>; - regulator-max-microvolt =3D <3300000>; - - gpio =3D <&tlmm 186 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 =3D <&usb1_pwr_3p3_reg_en>; - pinctrl-names =3D "default"; - - regulator-boot-on; - }; - - vph_pwr: regulator-vph-pwr { - compatible =3D "regulator-fixed"; - - regulator-name =3D "vph_pwr"; - regulator-min-microvolt =3D <3700000>; - regulator-max-microvolt =3D <3700000>; - - regulator-always-on; - regulator-boot-on; - }; - - /* - * TODO: These two regulators are actually part of the removable M.2 - * card and not the CRD mainboard. Need to describe this differently. - * Functionally it works correctly, because all we need to do is to - * turn on the actual 3.3V supply above. - */ - vreg_wcn_0p95: regulator-wcn-0p95 { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_WCN_0P95"; - regulator-min-microvolt =3D <950000>; - regulator-max-microvolt =3D <950000>; - - vin-supply =3D <&vreg_wcn_3p3>; - }; - - vreg_wcn_1p9: regulator-wcn-1p9 { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_WCN_1P9"; - regulator-min-microvolt =3D <1900000>; - regulator-max-microvolt =3D <1900000>; - - vin-supply =3D <&vreg_wcn_3p3>; - }; - - vreg_wcn_3p3: regulator-wcn-3p3 { - compatible =3D "regulator-fixed"; - - regulator-name =3D "VREG_WCN_3P3"; - regulator-min-microvolt =3D <3300000>; - regulator-max-microvolt =3D <3300000>; - - gpio =3D <&tlmm 214 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 =3D <&wcn_sw_en>; - pinctrl-names =3D "default"; - - regulator-boot-on; - }; - - wcn7850-pmu { - compatible =3D "qcom,wcn7850-pmu"; - - vdd-supply =3D <&vreg_wcn_0p95>; - vddio-supply =3D <&vreg_l15b_1p8>; - vddaon-supply =3D <&vreg_wcn_0p95>; - vdddig-supply =3D <&vreg_wcn_0p95>; - vddrfa1p2-supply =3D <&vreg_wcn_1p9>; - vddrfa1p8-supply =3D <&vreg_wcn_1p9>; - - wlan-enable-gpios =3D <&tlmm 117 GPIO_ACTIVE_HIGH>; - bt-enable-gpios =3D <&tlmm 116 GPIO_ACTIVE_HIGH>; - - pinctrl-0 =3D <&wcn_wlan_en>, <&wcn_bt_en>; - pinctrl-names =3D "default"; - - regulators { - vreg_pmu_rfa_cmn: ldo0 { - regulator-name =3D "vreg_pmu_rfa_cmn"; - }; - - vreg_pmu_aon_0p59: ldo1 { - regulator-name =3D "vreg_pmu_aon_0p59"; - }; - - vreg_pmu_wlcx_0p8: ldo2 { - regulator-name =3D "vreg_pmu_wlcx_0p8"; - }; - - vreg_pmu_wlmx_0p85: ldo3 { - regulator-name =3D "vreg_pmu_wlmx_0p85"; - }; - - vreg_pmu_btcmx_0p85: ldo4 { - regulator-name =3D "vreg_pmu_btcmx_0p85"; - }; - - vreg_pmu_rfa_0p8: ldo5 { - regulator-name =3D "vreg_pmu_rfa_0p8"; - }; - - vreg_pmu_rfa_1p2: ldo6 { - regulator-name =3D "vreg_pmu_rfa_1p2"; - }; - - vreg_pmu_rfa_1p8: ldo7 { - regulator-name =3D "vreg_pmu_rfa_1p8"; - }; - - vreg_pmu_pcie_0p9: ldo8 { - regulator-name =3D "vreg_pmu_pcie_0p9"; - }; - - vreg_pmu_pcie_1p8: ldo9 { - regulator-name =3D "vreg_pmu_pcie_1p8"; - }; - }; - }; -}; - -&apps_rsc { - regulators-0 { - compatible =3D "qcom,pm8550-rpmh-regulators"; - qcom,pmic-id =3D "b"; - - vdd-bob1-supply =3D <&vph_pwr>; - vdd-bob2-supply =3D <&vph_pwr>; - vdd-l1-l4-l10-supply =3D <&vreg_s4c_1p8>; - vdd-l2-l13-l14-supply =3D <&vreg_bob1>; - vdd-l5-l16-supply =3D <&vreg_bob1>; - vdd-l6-l7-supply =3D <&vreg_bob2>; - vdd-l8-l9-supply =3D <&vreg_bob1>; - vdd-l12-supply =3D <&vreg_s5j_1p2>; - vdd-l15-supply =3D <&vreg_s4c_1p8>; - vdd-l17-supply =3D <&vreg_bob2>; - - vreg_bob1: bob1 { - regulator-name =3D "vreg_bob1"; - regulator-min-microvolt =3D <3008000>; - regulator-max-microvolt =3D <3960000>; - regulator-initial-mode =3D ; - }; - - vreg_bob2: bob2 { - regulator-name =3D "vreg_bob2"; - regulator-min-microvolt =3D <2504000>; - regulator-max-microvolt =3D <3008000>; - regulator-initial-mode =3D ; - }; - - vreg_l2b_3p0: ldo2 { - regulator-name =3D "vreg_l2b_3p0"; - regulator-min-microvolt =3D <3072000>; - regulator-max-microvolt =3D <3100000>; - regulator-initial-mode =3D ; - }; - - vreg_l4b_1p8: ldo4 { - regulator-name =3D "vreg_l4b_1p8"; - regulator-min-microvolt =3D <1800000>; - regulator-max-microvolt =3D <1800000>; - regulator-initial-mode =3D ; - }; - - vreg_l13b_3p0: ldo13 { - regulator-name =3D "vreg_l13b_3p0"; - regulator-min-microvolt =3D <3072000>; - regulator-max-microvolt =3D <3072000>; - regulator-initial-mode =3D ; - }; - - vreg_l14b_3p0: ldo14 { - regulator-name =3D "vreg_l14b_3p0"; - regulator-min-microvolt =3D <3072000>; - regulator-max-microvolt =3D <3072000>; - regulator-initial-mode =3D ; - }; - - vreg_l15b_1p8: ldo15 { - regulator-name =3D "vreg_l15b_1p8"; - regulator-min-microvolt =3D <1800000>; - regulator-max-microvolt =3D <1800000>; - regulator-initial-mode =3D ; - }; - }; - - regulators-1 { - compatible =3D "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id =3D "c"; - - vdd-l1-supply =3D <&vreg_s5j_1p2>; - vdd-l2-supply =3D <&vreg_s1f_0p7>; - vdd-l3-supply =3D <&vreg_s1f_0p7>; - vdd-s4-supply =3D <&vph_pwr>; - - vreg_l3c_0p8: ldo3 { - regulator-name =3D "vreg_l3c_0p8"; - regulator-min-microvolt =3D <912000>; - regulator-max-microvolt =3D <912000>; - regulator-initial-mode =3D ; - }; - - vreg_s4c_1p8: smps4 { - regulator-name =3D "vreg_s4c_1p8"; - regulator-min-microvolt =3D <1856000>; - regulator-max-microvolt =3D <2000000>; - regulator-initial-mode =3D ; - }; - }; - - regulators-2 { - compatible =3D "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id =3D "d"; - - vdd-l1-supply =3D <&vreg_s1f_0p7>; - vdd-l2-supply =3D <&vreg_s1f_0p7>; - vdd-l3-supply =3D <&vreg_s4c_1p8>; - vdd-s1-supply =3D <&vph_pwr>; - - vreg_l1d_0p8: ldo1 { - regulator-name =3D "vreg_l1d_0p8"; - regulator-min-microvolt =3D <880000>; - regulator-max-microvolt =3D <920000>; - regulator-initial-mode =3D ; - }; - - vreg_l2d_0p9: ldo2 { - regulator-name =3D "vreg_l2d_0p9"; - regulator-min-microvolt =3D <912000>; - regulator-max-microvolt =3D <920000>; - regulator-initial-mode =3D ; - }; - - vreg_l3d_1p8: ldo3 { - regulator-name =3D "vreg_l3d_1p8"; - regulator-min-microvolt =3D <1800000>; - regulator-max-microvolt =3D <1800000>; - regulator-initial-mode =3D ; - }; - }; - - regulators-3 { - compatible =3D "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id =3D "e"; - - vdd-l2-supply =3D <&vreg_s1f_0p7>; - vdd-l3-supply =3D <&vreg_s5j_1p2>; - - vreg_l2e_0p8: ldo2 { - regulator-name =3D "vreg_l2e_0p8"; - regulator-min-microvolt =3D <880000>; - regulator-max-microvolt =3D <920000>; - regulator-initial-mode =3D ; - }; - - vreg_l3e_1p2: ldo3 { - regulator-name =3D "vreg_l3e_1p2"; - regulator-min-microvolt =3D <1200000>; - regulator-max-microvolt =3D <1200000>; - regulator-initial-mode =3D ; - }; - }; - - regulators-4 { - compatible =3D "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id =3D "f"; - - vdd-l1-supply =3D <&vreg_s5j_1p2>; - vdd-l2-supply =3D <&vreg_s5j_1p2>; - vdd-l3-supply =3D <&vreg_s5j_1p2>; - vdd-s1-supply =3D <&vph_pwr>; - - vreg_s1f_0p7: smps1 { - regulator-name =3D "vreg_s1f_0p7"; - regulator-min-microvolt =3D <700000>; - regulator-max-microvolt =3D <1100000>; - regulator-initial-mode =3D ; - }; - }; - - regulators-6 { - compatible =3D "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id =3D "i"; - - vdd-l1-supply =3D <&vreg_s4c_1p8>; - vdd-l2-supply =3D <&vreg_s5j_1p2>; - vdd-l3-supply =3D <&vreg_s1f_0p7>; - vdd-s1-supply =3D <&vph_pwr>; - vdd-s2-supply =3D <&vph_pwr>; - - vreg_l3i_0p8: ldo3 { - regulator-name =3D "vreg_l3i_0p8"; - regulator-min-microvolt =3D <880000>; - regulator-max-microvolt =3D <920000>; - regulator-initial-mode =3D ; - }; - }; - - regulators-7 { - compatible =3D "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id =3D "j"; - - vdd-l1-supply =3D <&vreg_s1f_0p7>; - vdd-l2-supply =3D <&vreg_s5j_1p2>; - vdd-l3-supply =3D <&vreg_s1f_0p7>; - vdd-s5-supply =3D <&vph_pwr>; - - vreg_s5j_1p2: smps5 { - regulator-name =3D "vreg_s5j_1p2"; - regulator-min-microvolt =3D <1256000>; - regulator-max-microvolt =3D <1304000>; - regulator-initial-mode =3D ; - }; - - vreg_l1j_0p8: ldo1 { - regulator-name =3D "vreg_l1j_0p8"; - regulator-min-microvolt =3D <880000>; - regulator-max-microvolt =3D <920000>; - regulator-initial-mode =3D ; - }; - - vreg_l2j_1p2: ldo2 { - regulator-name =3D "vreg_l2j_1p2"; - regulator-min-microvolt =3D <1256000>; - regulator-max-microvolt =3D <1256000>; - regulator-initial-mode =3D ; - }; - - vreg_l3j_0p8: ldo3 { - regulator-name =3D "vreg_l3j_0p8"; - regulator-min-microvolt =3D <880000>; - regulator-max-microvolt =3D <920000>; - regulator-initial-mode =3D ; - }; - }; -}; - -&gpu { - status =3D "okay"; -}; - -&gpu_zap_shader { - firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn"; -}; - -&i2c0 { - clock-frequency =3D <400000>; - status =3D "okay"; - - touchpad@15 { - compatible =3D "hid-over-i2c"; - reg =3D <0x15>; - - hid-descr-addr =3D <0x1>; - interrupts-extended =3D <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-0 =3D <&tpad_default>; - pinctrl-names =3D "default"; - - wakeup-source; - }; -}; - -&i2c1 { - clock-frequency =3D <400000>; - status =3D "okay"; -}; - -&i2c3 { - clock-frequency =3D <400000>; - status =3D "okay"; - - typec-mux@8 { - compatible =3D "parade,ps8830"; - reg =3D <0x08>; - - clocks =3D <&rpmhcc RPMH_RF_CLK3>; - - vdd-supply =3D <&vreg_rtmr0_1p15>; - vdd33-supply =3D <&vreg_rtmr0_3p3>; - vdd33-cap-supply =3D <&vreg_rtmr0_3p3>; - vddar-supply =3D <&vreg_rtmr0_1p15>; - vddat-supply =3D <&vreg_rtmr0_1p15>; - vddio-supply =3D <&vreg_rtmr0_1p8>; - - reset-gpios =3D <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; - - pinctrl-0 =3D <&rtmr0_default>; - pinctrl-names =3D "default"; - - orientation-switch; - retimer-switch; - - ports { - #address-cells =3D <1>; - #size-cells =3D <0>; - - port@0 { - reg =3D <0>; - - retimer_ss0_ss_out: endpoint { - remote-endpoint =3D <&pmic_glink_ss0_ss_in>; - }; - }; - - port@1 { - reg =3D <1>; - - retimer_ss0_ss_in: endpoint { - remote-endpoint =3D <&usb_1_ss0_qmpphy_out>; - }; - }; - - port@2 { - reg =3D <2>; - - retimer_ss0_con_sbu_out: endpoint { - remote-endpoint =3D <&pmic_glink_ss0_con_sbu_in>; - }; - }; - }; - }; -}; - -&i2c5 { - clock-frequency =3D <400000>; - status =3D "okay"; - - keyboard@3a { - compatible =3D "hid-over-i2c"; - reg =3D <0x3a>; - - hid-descr-addr =3D <0x1>; - interrupts-extended =3D <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-0 =3D <&kybd_default>; - pinctrl-names =3D "default"; - - wakeup-source; - }; - - eusb5_repeater: redriver@43 { - compatible =3D "nxp,ptn3222"; - reg =3D <0x43>; - #phy-cells =3D <0>; - - vdd3v3-supply =3D <&vreg_l13b_3p0>; - vdd1v8-supply =3D <&vreg_l4b_1p8>; - - reset-gpios =3D <&tlmm 7 GPIO_ACTIVE_LOW>; - - pinctrl-0 =3D <&eusb5_reset_n>; - pinctrl-names =3D "default"; - }; - - eusb3_repeater: redriver@47 { - compatible =3D "nxp,ptn3222"; - reg =3D <0x47>; - #phy-cells =3D <0>; - - vdd3v3-supply =3D <&vreg_l13b_3p0>; - vdd1v8-supply =3D <&vreg_l4b_1p8>; - - reset-gpios =3D <&tlmm 6 GPIO_ACTIVE_LOW>; - - pinctrl-0 =3D <&eusb3_reset_n>; - pinctrl-names =3D "default"; - }; - - eusb6_repeater: redriver@4f { - compatible =3D "nxp,ptn3222"; - reg =3D <0x4f>; - #phy-cells =3D <0>; - - vdd3v3-supply =3D <&vreg_l13b_3p0>; - vdd1v8-supply =3D <&vreg_l4b_1p8>; - - reset-gpios =3D <&tlmm 184 GPIO_ACTIVE_LOW>; - - pinctrl-0 =3D <&eusb6_reset_n>; - pinctrl-names =3D "default"; - }; - - /* EC @ 0x76 */ -}; - -&i2c7 { - clock-frequency =3D <400000>; - status =3D "okay"; - - typec-mux@8 { - compatible =3D "parade,ps8830"; - reg =3D <0x8>; - - clocks =3D <&rpmhcc RPMH_RF_CLK4>; - - vdd-supply =3D <&vreg_rtmr1_1p15>; - vdd33-supply =3D <&vreg_rtmr1_3p3>; - vdd33-cap-supply =3D <&vreg_rtmr1_3p3>; - vddar-supply =3D <&vreg_rtmr1_1p15>; - vddat-supply =3D <&vreg_rtmr1_1p15>; - vddio-supply =3D <&vreg_rtmr1_1p8>; - - reset-gpios =3D <&tlmm 176 GPIO_ACTIVE_LOW>; - - pinctrl-0 =3D <&rtmr1_default>; - pinctrl-names =3D "default"; - - retimer-switch; - orientation-switch; - - ports { - #address-cells =3D <1>; - #size-cells =3D <0>; - - port@0 { - reg =3D <0>; - - retimer_ss1_ss_out: endpoint { - remote-endpoint =3D <&pmic_glink_ss1_ss_in>; - }; - }; - - port@1 { - reg =3D <1>; - - retimer_ss1_ss_in: endpoint { - remote-endpoint =3D <&usb_1_ss1_qmpphy_out>; - }; - }; - - port@2 { - reg =3D <2>; - - retimer_ss1_con_sbu_out: endpoint { - remote-endpoint =3D <&pmic_glink_ss1_con_sbu_in>; - }; - }; - }; - }; -}; - -&iris { - firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qcvss8380.mbn"; - status =3D "okay"; -}; - -&mdss { - status =3D "okay"; -}; - -&mdss_dp0 { - status =3D "okay"; -}; - -&mdss_dp0_out { - link-frequencies =3D /bits/ 64 <1620000000 2700000000 5400000000 81000000= 00>; -}; - -&mdss_dp1 { - status =3D "okay"; -}; - -&mdss_dp1_out { - link-frequencies =3D /bits/ 64 <1620000000 2700000000 5400000000 81000000= 00>; -}; - -&mdss_dp2 { - status =3D "okay"; -}; - -&mdss_dp2_out { - link-frequencies =3D /bits/ 64 <1620000000 2700000000 5400000000 81000000= 00>; -}; - -&mdss_dp3 { - /delete-property/ #sound-dai-cells; - - pinctrl-0 =3D <&edp0_hpd_default>; - pinctrl-names =3D "default"; - - status =3D "okay"; - - aux-bus { - panel { - compatible =3D "samsung,atna56ac03", "samsung,atna33xc20"; - enable-gpios =3D <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; - power-supply =3D <&vreg_edp_3p3>; - - pinctrl-0 =3D <&edp_bl_en>; - pinctrl-names =3D "default"; - - port { - edp_panel_in: endpoint { - remote-endpoint =3D <&mdss_dp3_out>; - }; - }; - }; - }; -}; - -&mdss_dp3_out { - data-lanes =3D <0 1 2 3>; - link-frequencies =3D /bits/ 64 <1620000000 2700000000 5400000000 81000000= 00>; - - remote-endpoint =3D <&edp_panel_in>; -}; - -&mdss_dp3_phy { - vdda-phy-supply =3D <&vreg_l3j_0p8>; - vdda-pll-supply =3D <&vreg_l2j_1p2>; - - status =3D "okay"; -}; - -&pcie4 { - pinctrl-0 =3D <&pcie4_default>; - pinctrl-names =3D "default"; - - status =3D "okay"; -}; - -&pcie4_phy { - vdda-phy-supply =3D <&vreg_l3i_0p8>; - vdda-pll-supply =3D <&vreg_l3e_1p2>; - - status =3D "okay"; -}; - -&pcie4_port0 { - reset-gpios =3D <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios =3D <&tlmm 148 GPIO_ACTIVE_LOW>; - - wifi@0 { - compatible =3D "pci17cb,1107"; - reg =3D <0x10000 0x0 0x0 0x0 0x0>; - - vddaon-supply =3D <&vreg_pmu_aon_0p59>; - vddwlcx-supply =3D <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply =3D <&vreg_pmu_wlmx_0p85>; - vddrfacmn-supply =3D <&vreg_pmu_rfa_cmn>; - vddrfa0p8-supply =3D <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply =3D <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply =3D <&vreg_pmu_rfa_1p8>; - vddpcie0p9-supply =3D <&vreg_pmu_pcie_0p9>; - vddpcie1p8-supply =3D <&vreg_pmu_pcie_1p8>; - }; -}; - -&pcie6a { - vddpe-3v3-supply =3D <&vreg_nvme>; - - pinctrl-0 =3D <&pcie6a_default>; - pinctrl-names =3D "default"; - - status =3D "okay"; -}; - -&pcie6a_phy { - vdda-phy-supply =3D <&vreg_l1d_0p8>; - vdda-pll-supply =3D <&vreg_l2j_1p2>; - - status =3D "okay"; -}; - -&pcie6a_port0 { - reset-gpios =3D <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios =3D <&tlmm 154 GPIO_ACTIVE_LOW>; -}; - -&pm8550_gpios { - rtmr0_default: rtmr0-reset-n-active-state { - pins =3D "gpio10"; - function =3D "normal"; - power-source =3D <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; - - usb0_3p3_reg_en: usb0-3p3-reg-en-state { - pins =3D "gpio11"; - function =3D "normal"; - power-source =3D <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&pm8550ve_9_gpios { - usb0_1p8_reg_en: usb0-1p8-reg-en-state { - pins =3D "gpio8"; - function =3D "normal"; - power-source =3D <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&pmc8380_3_gpios { - edp_bl_en: edp-bl-en-state { - pins =3D "gpio4"; - function =3D "normal"; - power-source =3D <1>; /* 1.8 V */ - qcom,drive-strength =3D ; - bias-pull-down; - input-disable; - output-enable; - }; -}; - -&pmc8380_5_gpios { - usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { - pins =3D "gpio8"; - function =3D "normal"; - power-source =3D <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&qupv3_0 { - status =3D "okay"; -}; - -&qupv3_1 { - status =3D "okay"; -}; - -&qupv3_2 { - status =3D "okay"; -}; - -&remoteproc_adsp { - firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn", - "qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf"; - - status =3D "okay"; -}; - -&remoteproc_cdsp { - firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn", - "qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf"; - - status =3D "okay"; -}; - -&smb2360_0 { - status =3D "okay"; -}; - -&smb2360_0_eusb2_repeater { - vdd18-supply =3D <&vreg_l3d_1p8>; - vdd3-supply =3D <&vreg_l2b_3p0>; -}; - -&smb2360_1 { - status =3D "okay"; -}; - -&smb2360_1_eusb2_repeater { - vdd18-supply =3D <&vreg_l3d_1p8>; - vdd3-supply =3D <&vreg_l14b_3p0>; -}; - -&tlmm { - gpio-reserved-ranges =3D <34 2>, /* Unused */ - <44 4>, /* SPI (TPM) */ - <238 1>; /* UFS Reset */ - - edp_reg_en: edp-reg-en-state { - pins =3D "gpio70"; - function =3D "gpio"; - drive-strength =3D <16>; - bias-disable; - }; - - eusb3_reset_n: eusb3-reset-n-state { - pins =3D "gpio6"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-pull-up; - output-low; - }; - - eusb5_reset_n: eusb5-reset-n-state { - pins =3D "gpio7"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-pull-up; - output-low; - }; - - eusb6_reset_n: eusb6-reset-n-state { - pins =3D "gpio184"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-pull-up; - output-low; - }; - - hall_int_n_default: hall-int-n-state { - pins =3D "gpio92"; - function =3D "gpio"; - bias-disable; - }; - - hdmi_hpd_default: hdmi-hpd-default-state { - pins =3D "gpio126"; - function =3D "usb2_dp"; - bias-disable; - }; - - kybd_default: kybd-default-state { - pins =3D "gpio67"; - function =3D "gpio"; - bias-disable; - }; - - nvme_reg_en: nvme-reg-en-state { - pins =3D "gpio18"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-disable; - }; - - pcie4_default: pcie4-default-state { - clkreq-n-pins { - pins =3D "gpio147"; - function =3D "pcie4_clk"; - drive-strength =3D <2>; - bias-pull-up; - }; - - perst-n-pins { - pins =3D "gpio146"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-disable; - }; - - wake-n-pins { - pins =3D "gpio148"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-pull-up; - }; - }; - - pcie6a_default: pcie6a-default-state { - clkreq-n-pins { - pins =3D "gpio153"; - function =3D "pcie6a_clk"; - drive-strength =3D <2>; - bias-pull-up; - }; - - perst-n-pins { - pins =3D "gpio152"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-disable; - }; - - wake-n-pins { - pins =3D "gpio154"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-pull-up; - }; - }; - - rtmr1_default: rtmr1-reset-n-active-state { - pins =3D "gpio176"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-pull-up; - }; - - tpad_default: tpad-default-state { - pins =3D "gpio3"; - function =3D "gpio"; - bias-disable; - }; - - usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { - pins =3D "gpio188"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-pull-up; - }; - - usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { - pins =3D "gpio175"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-pull-up; - }; - - usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { - pins =3D "gpio186"; - function =3D "gpio"; - drive-strength =3D <2>; - bias-pull-up; - }; - - wcn_bt_en: wcn-bt-en-state { - pins =3D "gpio116"; - function =3D "gpio"; - drive-strength =3D <16>; - bias-pull-down; - }; - - wcn_sw_en: wcn-sw-en-state { - pins =3D "gpio214"; - function =3D "gpio"; - drive-strength =3D <16>; - bias-disable; - }; - - wcn_wlan_en: wcn-wlan-en-state { - pins =3D "gpio117"; - function =3D "gpio"; - drive-strength =3D <16>; - bias-disable; - }; -}; - -&uart14 { - status =3D "okay"; - - bluetooth { - compatible =3D "qcom,wcn7850-bt"; - max-speed =3D <3200000>; - - vddaon-supply =3D <&vreg_pmu_aon_0p59>; - vddwlcx-supply =3D <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply =3D <&vreg_pmu_wlmx_0p85>; - vddrfacmn-supply =3D <&vreg_pmu_rfa_cmn>; - vddrfa0p8-supply =3D <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply =3D <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply =3D <&vreg_pmu_rfa_1p8>; - }; -}; - -&usb_1_ss0_hsphy { - vdd-supply =3D <&vreg_l3j_0p8>; - vdda12-supply =3D <&vreg_l2j_1p2>; - - phys =3D <&smb2360_0_eusb2_repeater>; - - status =3D "okay"; -}; - -&usb_1_ss0_qmpphy { - vdda-phy-supply =3D <&vreg_l2j_1p2>; - vdda-pll-supply =3D <&vreg_l1j_0p8>; - - status =3D "okay"; -}; - -&usb_1_ss0 { - status =3D "okay"; -}; - -&usb_1_ss0_dwc3 { - dr_mode =3D "host"; -}; - -&usb_1_ss0_dwc3_hs { - remote-endpoint =3D <&pmic_glink_ss0_hs_in>; -}; - -&usb_1_ss0_qmpphy_out { - remote-endpoint =3D <&retimer_ss0_ss_in>; -}; - -&usb_1_ss1_hsphy { - vdd-supply =3D <&vreg_l3j_0p8>; - vdda12-supply =3D <&vreg_l2j_1p2>; - - phys =3D <&smb2360_1_eusb2_repeater>; - - status =3D "okay"; -}; - -&usb_1_ss1_qmpphy { - vdda-phy-supply =3D <&vreg_l2j_1p2>; - vdda-pll-supply =3D <&vreg_l2d_0p9>; - - status =3D "okay"; -}; - -&usb_1_ss1 { - status =3D "okay"; -}; - -&usb_1_ss1_dwc3 { - dr_mode =3D "host"; -}; - -&usb_1_ss1_dwc3_hs { - remote-endpoint =3D <&pmic_glink_ss1_hs_in>; -}; - -&usb_1_ss1_qmpphy_out { - remote-endpoint =3D <&retimer_ss1_ss_in>; -}; - -&usb_1_ss2_qmpphy { - vdda-phy-supply =3D <&vreg_l2j_1p2>; - vdda-pll-supply =3D <&vreg_l2d_0p9>; - - /delete-property/ mode-switch; - /delete-property/ orientation-switch; - - status =3D "okay"; - - ports { - port@0 { - #address-cells =3D <1>; - #size-cells =3D <0>; - - /delete-node/ endpoint; - - usb_1_ss2_qmpphy_out_dp: endpoint@0 { - reg =3D <0>; - - data-lanes =3D <3 2 1 0>; - remote-endpoint =3D <&hdmi_bridge_dp_in>; - }; - - /* No USB3 lanes connected */ - }; - }; -}; - -&usb_2 { - status =3D "okay"; -}; - -&usb_2_dwc3 { - dr_mode =3D "host"; -}; - -&usb_2_hsphy { - vdd-supply =3D <&vreg_l2e_0p8>; - vdda12-supply =3D <&vreg_l3e_1p2>; - - phys =3D <&eusb5_repeater>; - - status =3D "okay"; -}; - -&usb_mp { - status =3D "okay"; -}; - -&usb_mp_hsphy0 { - vdd-supply =3D <&vreg_l2e_0p8>; - vdda12-supply =3D <&vreg_l3e_1p2>; - - phys =3D <&eusb3_repeater>; - - status =3D "okay"; -}; - -&usb_mp_hsphy1 { - vdd-supply =3D <&vreg_l2e_0p8>; - vdda12-supply =3D <&vreg_l3e_1p2>; - - phys =3D <&eusb6_repeater>; - - status =3D "okay"; -}; - -&usb_mp_qmpphy0 { - vdda-phy-supply =3D <&vreg_l3e_1p2>; - vdda-pll-supply =3D <&vreg_l3c_0p8>; - - status =3D "okay"; -}; - -&usb_mp_qmpphy1 { - vdda-phy-supply =3D <&vreg_l3e_1p2>; - vdda-pll-supply =3D <&vreg_l3c_0p8>; - - status =3D "okay"; -}; +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024, Xilin Wu + */ + +/dts-v1/; + +#include "hamoa.dtsi" +#include "x1-asus-vivobook-s15.dtsi" + +/ { + model =3D "ASUS Vivobook S 15"; + compatible =3D "asus,vivobook-s15", "qcom,x1e80100"; + chassis-type =3D "laptop"; +}; + +&gpu_zap_shader { + firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn"; +}; + +&iris { + firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qcvss8380.mbn"; + status =3D "okay"; +}; + +&remoteproc_adsp { + firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn", + "qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf"; + + status =3D "okay"; +}; + +&remoteproc_cdsp { + firmware-name =3D "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn", + "qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf"; + + status =3D "okay"; +}; + diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-vivobook-s15.dts b/arch= /arm64/boot/dts/qcom/x1p42100-asus-vivobook-s15.dts new file mode 100644 index 0000000000000000000000000000000000000000..336bd0c10992f2a60b384b247ae= 2219f75d8b8a4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-vivobook-s15.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024, Xilin Wu + */ + +/dts-v1/; + +#include "purwa.dtsi" +#include "x1-asus-vivobook-s15.dtsi" + +/delete-node/ &pmc8380_6; +/delete-node/ &pmc8380_6_thermal; + +/ { + model =3D "ASUS Vivobook S 15 X1P-42-100"; + compatible =3D "asus,vivobook-s15-x1p4", "qcom,x1p42100"; + chassis-type =3D "laptop"; +}; + +&gpu { + status =3D "okay"; +}; + +&gpu_zap_shader { + firmware-name =3D "qcom/x1p42100/ASUSTeK/vivobook-s15/qcdxkmsucpurwa.mbn"; +}; + +&iris { + firmware-name =3D "qcom/x1p42100/ASUSTeK/vivobook-s15/qcvss8380.mbn"; + status =3D "okay"; +}; + +&remoteproc_adsp { + firmware-name =3D "qcom/x1p42100/ASUSTeK/vivobook-s15/qcadsp8380.mbn", + "qcom/x1p42100/ASUSTeK/vivobook-s15/adsp_dtbs.elf"; + + status =3D "okay"; +}; + +&remoteproc_cdsp { + firmware-name =3D "qcom/x1p42100/ASUSTeK/vivobook-s15/qccdsp8380.mbn", + "qcom/x1p42100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf"; + + status =3D "okay"; +}; + --=20 2.51.0